Search Results

Search found 29317 results on 1173 pages for 'device control'.

Page 314/1173 | < Previous Page | 310 311 312 313 314 315 316 317 318 319 320 321  | Next Page >

• How do I usb tether my Cyanogen modded G1's internet connection to my Toshiba Tecra 8000 running Xub

  - by atticus

  I have usb-tethering enabled in my phone. It works fine with Vista. When I plug my phone into my Tecra 8000 laptop running Xubuntu, dmesg shows: "usb 1-1: new full speed USB device using uhci_hcd and address 8". I see that the OS has detected it as a storage device, but I can't get it to function correctly as a network device. /dev/us* shows no usb0, but it does show /dev/usbdev1.1_ep00 /dev/usbdev1.1_ep81 /dev/usbdev1.8_ep00 ... usbdev1.8_ep83.

  Read the article

• Refresh devices - reconnect CF card drive by script (unplug-plug equivalent)

  - by Chris

  Hello I plug a completely clean CF-card into my USB card-writer. Then I dd a mbr block of 512 bytes size to the device, which contains the partition table and the definition of one partition. Problem: While "fdisk -l /dev/sdx" correctly displays the partition, it happens that there is no device like "/dev/sdx1" after these operations (as it was not present before). Unplugging and plugging the card-writer solves the problem and makes the device(s) appear. Since I use this procedure in a script, manually unplugging and re-plugging is no option whatsoever. Is there a way to "refresh" the devices or to "unplug and re-plug" the drive by script such that /dev/sdx1 appears? Thanks for any help, Chris

  Read the article

• POST data not being received

  - by Alexander

  I've got an iPhone App that is supposed to send POST data to my server to register the device in a MySQL database so we can send notifications etc... to it. It sends it's unique identifier, device name, token, and a few other small things like passwords and usernames as a POST request to our server. The problem is that sometimes the server doesn't receive the data. And by this I mean, its not just receiving blank values for the POST inputs but, its not receiving ANY post data at all. I am logging all POST inputs to my server into some log files and when the script that relies on the POST data from the device fails (detects no data) I notice that its because NO POST data was sent. Is this a problem on the server, like refusing data or something or does this have to be on the client's side? What could be causing this?

  Read the article

• PC doesn't select right monitor sometimes

  - by Madhur Ahuja

  I have an ACER LCD monitor with Intel G33/G31 display chipset. The preferred resolution for monitor is 1440x900. The drivers for both monitor and display are correctly installed and displayed in Device Manager section. However, I have observed, sometimes, in Display properties, my PC shows Display Device on: VGA instead of Display Device on: Acer , and when that happens, the resolution becomes distorted and I am unable to switch back to 1440x900. However, this problem resolves itself automatically sometimes between reboots. Any idea what's going on ?

  Read the article

• MS-DOSdivide overflow

  - by repozitor

  when i want to install my dear application on MS-DOS os, i see error "Divide Overflow" what is the meaning of this error and how to fix it? the procedure of installing is: 1-partitioing my HDD disk 2-format C drive 3-installing MS-DOS 4-add the flowing lines to config.sys "DEVICE=C:\DOS\HIMEM.SYS DEVICE=C:\DOS\EMM386.EXE RAM DEVICE=C:\DOS\RAMDRIVE.SYS 6000 512 64 /e" 5-insert my floppy application and then restart 6-when boot process completed, all of the thing appear correctly and i now how to do the next steps note:for installing my application i need to boot from floppy app when i have ms-dos on my hdd disk i do it successfully on the Virtual machine, Q emulator but i can't do it on the real machine, Vectra HP PC, because of divide overflow

  Read the article

• Bluetooth Headset pairs and appears in Sound Devices, but shows as Disconnected?

  - by Mike

  I recently got a TrueBlue TB-100T3 and tried pairing it with my computer (Windows 7 64-bit). At first it paired but would not appear under Sound Devices. I updated my Broadcom Bluetooth drivers here: http://www.broadcom.com/support/bluetooth/update.php Now my headset appears in both Playback and Recording, but shows as Disconnected. The device is on, paired, and appears under Device Manager as having no problems. I right-clicked and installed both the Hands-free Telephony and Headset services. Here is an image: http://i.stack.imgur.com/vG2S7.png Right-clicking the device and selecting Connect does nothing. Does anyone have a solution? Thanks!

  Read the article

• How to reset password for Dell PowerConnect 2708?

  - by oherrala

  I do as the user manual says and press "Managed Mode" button to get into unmanaged mode and then press "Managed Mode" button again for managed mode. This should reset the device to factory defaults and username "Admin" with no password. However, the device resets (I think) and I can access the web console from IP 192.168.2.1, but the username and password doesn't work. Maybe the device doesn't reset after all. Or the username/password has been changed in some firmware upgrade? What should I do to get into management of this switch?

  Read the article

• USB driver problems (Windows 8.1)

  - by HelloWorld

  Every time I turn on my laptop the USB ports don't work and the drivers have an error. In order to fix this I'm forced to start the Device Manager, uninstall all the USB drivers, open the Control Panel, click Find and fix problems (under System and Security), click Configure a device (under Hardware and Sound) and then when that window pops up just hit Next until I can see my USB drivers reinstalled and working in the Device Manager window under Universal Serial Bus controllers. I found this way to fix it but I would like a permanent solution so that I don't have to do this every time I turn on the machine. Any ideas? When I bought the machine it had Window 7 installed but I later upgraded it to Windows 8.0 and then 8.1 after that.

  Read the article

• Alsa hardware volume with PulseAudio

  - by Jan Hudec

  Before installing pulseaudio, I was able to control volume for the front (meaning on the front panel, the "headphone" jack) and rear (meaning on the back panel, the "line out" jack) separately. When I installed pulseaudio, it became possible to control volume for each playing process separately, but the individual controls for outputs disappeared. While the default device in alsa now routes via pulseaudio, the sysdefault device provides access to the hardware. But kmix does not seem to let me show them now. Is there any way to beat kmix into showing the sysdefault device too? Or something else X-based that would not fight with kmix too much? The system is Debian Jessie (testing) amd64, updated, KDE version 4:4.13.3-1.

  Read the article

• XEN disk mapping problem under opensolaris

  - by Louis

  I have a system with two harddisks, i wanted to use the simplicity of ZFS for my file server and i also need to run a linux. I choosed XEN virtualization for that, supported on both system. My GRUB is well configured and i can boot both system. I would like is to run both system with solaris as a dom0 and the debian installed on the 2nd HD as a virtual machine. My problem is that i want to use the partitions of my 1st harddisk (sda1 under linux) and it does not work. I didn't find my use case on the web- Here is my Opensolaris device name of this partition : /dev/rdsk/c7d0p1 But when i use : disk = [ 'phy:rdsk/c7d0p1,sda1,w' ] as a disk mapping in my XEN configuration file i have the error : Error: Device 2049 (vbd) could not be connected. error: "rdsk/c7d0p1" is not a valid block device. I am "lost".

  Read the article

• CPU load, USB connection vs. NIC

  - by T.J. Crowder

  In general, and understanding the answer may vary by manufacturer and model (and driver, and...), in consumer-grade workstations with integrated NICs, does the NIC rely on the CPU for a lot of help (as is typically the case with a USB controller, for instance), or is it fairly intelligent and capable on its own (like, say, the typical Firewire controller)? Or is the question too general to answer? (If it matters, you can assume Linux.) Background: I'm looking at connecting a device (digital television capture) that will be delivering ~20-50 Mbit/sec of data to a somewhat under-powered workstation. I can get a USB 2 High-speed device, or a network-attached device, and am interested in avoiding impacting the CPU where possible. Obviously, if it's a 100Mbit NIC, that's roughly half its theoretical inbound bandwidth, whereas it's only roughly a tenth of the 480 Mbit/second the USB 2 "High Speed" interface. But if the latter requires a lot of CPU support and the former doesn't...

  Read the article

• Computer not acknowledging sound card after move

  - by Angela

  We just got our computer back from having moved and when I tried to hook our speaker system, the computer keeps telling me that I don't have a sound system installed. It's a Dell computer with the original surround/subwoofer system that it came with and was working fine before the move. I tried buying a new speaker system (Logitech) to see if it would work, but still saying I have no audio device installed and it's not showing up in my device manager. I opened up the computer and unplugged the sound card, then plugged it back in, still nothing. I put the install disc from the sound card in the cd-rom, but it's saying that I have no sound device hardware in my system.

  Read the article

• Can Windows tell me what is using my USB drive?

  - by PP

  Being the good citizen I am, I left-click on the "Safely Remove Hardware" icon in my taskbar, and select my USB drive to dismount. Then I get the message: Windows can't stop your 'Generic volume device because it is in use. Close any programs or windows that might be using the device, and then try again later. Of course, being the Operating System, it knows exactly what applications are using my device. So why won't it tell me? As usual, I always end my Vista questions with this plea: anyone know a Microsoft Engineer I can kick?

  Read the article

• Cannot import video from a DV camcorder over FireWire

  - by qbeuek

  I have a JVC GR-D320 miniDV camcorder that has a FireWire interface. I recently upgraded to Windows 7 RTM (64 bit, fresh installation). When I connect my camcorder through FireWire, I can see it in Device Manager without any warnings or problems, but I cannot capture videos from my miniDV tapes. After connecting, AutoPlay displays "Import Video could not find a compatible digital video device. Verify that the digital video device is properly connected and turned on." When using Windows Live Photo Gallery after selecting the import option, my camera is not listed. The camera used to work perfectly on the same hardware before upgrading to Windows 7 RTM 64 bit (it used to work fine on Windows XP SP3 32 bit). Googleing revealed that people had the exact same problems in Vista, but no solution was provided. Any help?

  Read the article

• NVRAM for journals on Linux?

  - by symcbean

  I've been thinking about ways of speeding up disk I/O, and one of the bottlenecks I keep coming back to is the journal. There's an obvious benefit to using an SSD for the journal - over and above just write caching unless of course I just disable the journal with the write cache (after all devicemapper doesn't seem to support barriers). In order to get the benefits from using a BB write cache on the controller, then I'd need to disable journalling - but then the OS should try to fsck the system after an outage. Of course if the OS knows what's in the batter-backed memory then it could use it as the journal - but that means it must be exposed as a block device and only be under the control of the operating system. However I've not been able to find a suitable low-cost device (no, write-levelling for Flash is not adequate for a journal, at least one which uses Smartmedia). While there's no end of flash devices, disk/array controllers with BB write caches, so far I've not found anything which just gives me non-volatile memory addressable as a block storage device.

  Read the article

• Second video card (PCI) under Windows 7

  - by dbkk101

  I'm trying to get an old PCI video card (Diamond Stealth 2500) along with a normal PCI-E video card. In BIOS, there is a setting to switch between PEG/PCI or PCI/PEG on startup (PEG is PCI-E Graphics). When I use PCI/PEG only the old PCI card works, when I use the other one, only the new PEG card works. In PEG/PCI mode, Windows 7 recognizes the card and shows it in Device Manager as Standard VGA adapter, but it shows a warning for the device ("This device cannot start. (Code 10)").

  Read the article

• OpenWrt Backfire 10.03 Frequently Becoming Unresponsive (Bridged Client)

  - by Christopher Parker

  I have a Linksys WRT54G version 2 that I've flashed with OpenWrt Backfire 10.03. It's acting as a bridged client using the wl.o driver to give me network access in my home office, which is in a far corner of my house in a position that would make it exceedingly difficult to fish network cabling in through the walls. I have three network-ready devices attached to the device that don't currently support WiFi, including a networked printer. Ever since I migrated from WhiteRussian, which was also set up as a bridged client, to Backfire, the device has been becoming unresponsive, as though the OS itself has crashed or frozen. The WLAN light becomes completely solid and the LAN lights stay mostly solid, blipping off and then back on again maybe once a second or so. They all blink more or less in unison. Is there some way I can diagnose why this is happening so I can fix it? Right now, the only way to fix it is to unplug the device and plug it back in.

  Read the article

• HTC Android Fails to mount- Mount from computer?

  - by Ben Franchuk

  I Have an HTC Incredible S (S-Off, Rooted, ViperVIVO 1.3.0 ICS) that has seemingly ceased to posses the ability to mount its SD Storage to my computer. For whatever reason, whenever I plug in my device to transfer files from computer to phone and vice versa, the computer, for some reason, cannot actually aces the phone. I get prompted with a window on my phone when I first plug it in, asking me which mode I want to put the device into (Charge mode, tether mode, etc.), and even if I select the "Disk Drive" function, the phone still cannot successfully mount to my computer. The phone itself unmounts itself from the SD and says that the computer is connected, but again, it doesn't work. Is there any way to force mount the device from my computer- either via command or otherwise? This should help in that if I unmount the SD from the phone I should be able to mount it to my computer, from my computer, Correct?

  Read the article

• What are the quality metrics for RAM?

  - by Hi-Tech KitKat Android

  I have searched RAM and i found there are given some specification for the same capacity RAM, What are the difference and performance comparison between these? Like RAM1 General Brand Transcend Memory Type 2 GB (8 x 128 MB) DDR2 DIMM Memory Standard DDR2-800/PC-6400 Compatible Device PC Pins 240-pin Burst Length 4, 8 Buffered/Unbuffered Unbuffered Memory Memory Clock 400 MHz Technology DDR2 SDRAM Memory CAS Latency 4, 5, 6 RAM 2 General Brand Transcend Memory Type 2 GB (8 x 128 MB) DDR2 DIMM Memory Standard DDR2-667/PC2-5300 Compatible Device PC Pins 240-pin Burst Length 4, 8 Buffered/Unbuffered Unbuffered Memory Memory Clock 333 MHz Technology DDR2 SDRAM Memory CAS Latency 3, 4, 5 RAM3 General Brand Kingston Memory Type 2 GB (64 x 256 MB) 800 MHz DDR2 DIMM Compatible Device PC Pins 240-pin Error Check Non-ECC Buffered/Unbuffered Unbuffered Memory Memory Clock 200 MHz Technology DDR2 SDRAM Memory CAS Latency 6 What are the affect of the following Memory Type(given as 8 x 128 MB) Memory Clock (given in MHz) CAS Latency (given as 4,5,6) my Requirement is 2 GB DDR2 Type Desktop Please help

  Read the article

• Is there such a thing as an IP femtocell, and what does it do?

  - by The Journeyman geek

  My dad mentioned a co-worker suggested using a device, that might use CDMA to route calls through IP to save costs on a certain overseas project we're on- since our home base is quite far from there. I've never heard of such a device, so if it does exist, I'm wondering, if it's specific to particular ISPs, or if you can just pick one off the shelf, plug it into an arbitrary Internet connection, and make calls using it and a cellphone of some sort? As you can tell, details are sketchy, so... if such a device doesn't exist, saying so might be a right answer ;)

  Read the article

• Broadcom bluetooth driver for Windows 7 on MacBook Pro

  - by Sergiy Byelozyorov

  I have installed Windows 7 on MacBook Pro using BootCamp. Usually when turning my Bluetooth headset on and trying to pair it with Mac for the first time, Windows would fail to install drivers and open solution in Action Center, which suggests to download the driver from the Broadcom webpage. This worked before and drivers would install and work. However now, when I start driver installer, it would get stuck at "Detecting Bluetooth Device" stage. Below the steps there is also a warning with text, which says "Please plug in or turn ob your Bluetooth device". This is how the installer looks like when it's stuck: I have tried turning my headset on/off, bringing it into pairing mode, installing/uninstalling device to/from the Bluetooth Devices. None of these worked. Any ideas?

  Read the article

• Apache configuration to accept all data

  - by ServerDown

  Hi, I have apache running on port 7979 to talk with a device that sends data to webserver and later will run php scripts to process and send reply xml. The problem now is that it sends data like POST HTTP/1.1 Content-Type:text/xml Content-Length:369 Followed by XML When apache sees this it gives a 400 error. Since the device cannot be changed is there any way to accept the full data sent from the device and write to some log? Currently apache simply keeps sending 400 errors back. If there was a way to log the entire xml or create some custom handler for 400 error then the xml could be read by a php script. Looking forward to solutions.

  Read the article

• No HDMI audio - Windows 8 - ASUS H81M-PLUS

  - by Paul Wright

  I have an issue with HDMI audio on Windows 8 using an ASUS H81M-PLUS motherboard (without an external GFX card). There are many forum posts advising you to go into playback devices and setting HDMI to be default - I have done this. To eliminate what works and what doesn't work: I have not been able to get sound from my HDTV using HDMI. I have used this HDMI cable with my PS3, so this cable should be fine. I am able to use the HDMI cable in extended mode, so that I have two monitors (including the TV), just no audio. This HDMI cable goes straight from the motherboard to the TV. Below I have included 'Device manager', and 'Playback Devices' (Sound). Device Manager Playback Devices, showing disabled and disconnected devices I am at a loss. I have uninstalled all drivers, and then rebooted and made windows look for the correct ones, made sure the HDMI device was default. Thanks, Paul

  Read the article

• Windows 8 - Ubuntu dual boot

  - by Serkan Özkan

  I bought a new Toshiba s855 notebook with windows 8 preinstalled. Secure boot feature was enabled by default. I installed latest version of ubuntu after disabling secure boot feature(it was not possible to install ubuntu without disabling secure boot). But now when I enable secure boot, the system automatically boots into windows 8, and it boots into ubuntu when I disable secure boot. EasyBCD lists the following boot entries but I can only see Windows 8 in boot menu: Default: Windows 8 Timeout: 7 seconds EasyBCD Boot Device: C:\ Entry #1 Name: Ubuntu BCD ID: {971641cd-304a-11e2-be82-806e6f6e6963} Device: \Device\HarddiskVolume2 Bootloader Path: \EFI\ubuntu\grubx64.efi ... Entry #5 Name: Windows 8 BCD ID: {current} Drive: C:\ Bootloader Path: \windows\system32\winload.efi Any recommendations will be appreciated.

  Read the article

• Network card dies when trying to wake up laptop from sleep

  - by Bugmaster

  I have a Dell XPS 1640 laptop (aka Dell Studio XPS 16), running Vista. Whenever the laptop wakes up from sleep, my Broadcomm LAN card immediately dies. Any attempt to access it completely locks up whichever program I use to access it. There appears to be no way to re-awaken the card, other than rebooting; note that Vista does not even shut down properly if some program is waiting for the card. So far, I have tried the following: Disabled the "allow your computer to shut down this device to save power" in the device properties. This had no effect. Attempted to disable and then enable the card in the device properties. No effect. Tried ipconfig /renew: this locks up ipconfig to the point where I can't even kill its process. Force-install updated drivers from broadcomm: no effect. Does anyone have any other ideas ?

  Read the article

< Previous Page | 310 311 312 313 314 315 316 317 318 319 320 321  | Next Page >