Search Results

Search found 11960 results on 479 pages for 'virtual domains'.

Page 316/479 | < Previous Page | 312 313 314 315 316 317 318 319 320 321 322 323  | Next Page >

  • Seeing traffic destined for other people's servers in wireshark

    - by user350325
    I rent a dedicated server from a hosting provider. I ran wireshark on my server so that I could see incoming HTTP traffic that was destined to my server. Once I ran wireshark and filtered for HTTP I noticed a load of traffic, but most of it was not for stuff that was hosted on my server and had a destination IP address that was not mine, there were various source IP addresses. My immediate reaction was to think that somebody was tunnelling their HTTP traffic through my server somehow. However when I looked closer I noticed that all of this traffic was going to hosts on the same subnet and all of these IP addresses belonged to the same hosting provider that I was using. So it appears that wireshark was intercepting traffic destined for other customers who's servers are attached to the same part of the network as mine. Now I always assumed that on a switch based network that this should not happen as the switch will only send data to the required host and not to every box attached. I assume in this case that other customers would also be able to see data going to my server. As well as potential privacy concerns, this would surely make ARP poising easy and allow others to steal IP addresses (and therefor domains and websites)? It would seem odd that a network provider would configure the network in such a way. Is there a more rational explanation here?

    Read the article

  • LAN Webserver not accessible through PPTP VPN

    - by Joe
    I have this LAN Network with 10 clients and one server. The server has 4 virtual machines and a BIND DNS Server. When the router assigns an IP through the DHCP , it also gives the ip of the DNS Server, to resolve internal domains. Everything apparently works fine, the clients being able to access the server's vm's resources, but I also have to create the possibility of remote access. I installed the PPTP VPN on the server, and the vpn clients would get the same ip address range as the router's dhcp is assigning. Apparently everything is fine here also, except the fact that when we connect through the vpn , we cannot access the webserver on port 80 ( the webserver being one of the server's VM ). The iptables on the webserver has been turned off for testing purposes and the router's firewall is directing all the external traffic to the server. Can somebody suggest a solution to this? Extra details : VPN Server : PPTP Server Centos 6.3 x64 VPN Client : Windows 7 default PPTP VPN Connection The client is successfully connected to the server, everything works ( FTP/MYSQL/SSH/DNS ) , except the fact that when I try to access the webserver IP on the browser, it won't work.Pinging it works perfectly.

    Read the article

  • Easiest way to do host name resolution with IPA?

    - by Luke
    We are currently using static LAN IP addresses for our internal non-public facing servers. We don't have DHCP configured. We're using Vyatta for our router and firewall. The firewall is configured to be zone based. We want to setup IPA for centralized authentication (LDAP+Kerberos). IPA is requiring resolvable host names. I want to avoid having to enter DNS records by hand. What is the most painless way to make host names resolvable that works with IPA in a Linux only environment? We arn't using anything to resolve host names now. Up until now we've been using static ip addresses and local users on each server. We've looked at BIND, DHCP (does that even solve the problem?), and multicast DNS. At this point we're not sure which solution would work best. Is there another option we haven't considered? Security is very important. We have multiple zones where each zone has very specific or no access to another zone. DNS for public domains is forwarded from Vyatta to our ISP's DNS server.

    Read the article

  • Cant configure DNS properly on centos

    - by Nuker
    I am on a VPS i must manage my own. I have network problems because in the last days many of my users report they cant enter my site from my domain and seems like Google and Facebook cant either (this never happened before). However i can enter my site without problems and so many other people as well. So i tested by making a php include like this <?php include 'http://mysite.com/somepage.php'; ?> and i get this error: Warning: include(): php_network_getaddresses: getaddrinfo failed: Name or service not known in I even tried by including content from yahoo.com or facebook and didnt work either. However the includes will work if i use IPs instead of domains. Do i have a DNS problem or something? What can i do to fix it? Im on a Linux 2.6.32-431.11.2.el6.x86_64 on x86_64 CentOS Linux 6.5 I have this on my resolv.conf # Generated by NetworkManager # No nameservers found; try putting DNS servers into your # ifcfg files in /etc/sysconfig/network-scripts like so: # # DNS1=xxx.xxx.xxx.xxx # DNS2=xxx.xxx.xxx.xxx # DOMAIN=lab.foo.com bar.foo.com nameserver 8.8.8.8 nameserver 8.8.4.4 Thank you.

    Read the article

  • Hostname vs webpage domain.

    - by Mark
    Hi All, Im just starting to look at deploying a webpage and get into the joy of DNS etc. And im wondering how you set up multiple web-servers all with thier own hostnames/public IP addresses, and yet have them serve up a webpage from one domain. For example, lets say you have a website example.com, and an A record in DNS that points at it's IP address of 1.2.3.4 . You want to have two servers, prod1 and prod2 with some kind of load balancer in front of them for fail over reasons. The way I see it you would want to have the hostnames of these servers as prod1.example.com and prod2.example.com and perhaps loadb.example.com. How would you set up the DNS so this would all work. ie you could ssh to any of the server domains, prod1.example.com, prod2.example.com or loadb.example.com and also just use the www.example.com url to go to the website. And would all these server names be resolvable from the public internet and is that safe? This would be a linux environment, for arguments sake ubuntu, a django framework dynamic website, running in apache 2.2 Cheers Mark

    Read the article

  • Glassfish and SSL [closed]

    - by Richard
    I'm struggling to get SSL working on Glassfish 3.1.1. I've been following tutorials like http://javadude.wordpress.com/2010/04/06/getting-started-with-glassfish-v3-and-ssl/ and SO posts like this Issues with setting up SSL on Glassfish v3 The above links are for information only. I've summarised what I've done below. As far as I can tell I'm doing everything correctly but I'm getting this error: SSL configuration is invalid due to No available certificate or key corresponds to the SSL cipher suites which are enabled Some background of what I have done: My cert is from GoDaddy. I generated the CSR from a new keystore (keystore.jks), then imported the resulting certs back into the same keystore and set the keystore password to the same pwd as the GF master password. Then created a new SSL listener in GF and pointed it at my keystore file (which I copied into domains/domain1/config). Set the Nickname to the alias of my cert (which is something liem 'mydomain.org' i.e. the name that I get when I run keytool -list. In my ciphers section in the network listeners page, I leave the defaults in place (empty, which means all ciphers are available I think). In domain.xml I've replaced all instances of s1as to 'mydomain.org'. This is the question: What exactly is causing the error highlighted? I'm guessing it's a mismatch between my listener config and aliases in my keystore, or something similar, but I'm not really sure what. Thanks

    Read the article

  • The Web Hosting Connundrum for "not quite" developers

    - by saltcod
    Hey all, Apologies if this post feels like its been covered elsewhere, but I don't think it has. I've been down a winding web hosting road. To date, I've tried: Joyent, Media Temple, Bluehost, Hostgator, and finally Linode. The reason for switching are likely obvious to everyone: speed. With the exception of the lightening fast Linode, all of the shared hosts are absolutely sloooow. What do do when you're not really a "developer" While I'v grown addicted to the speed of Linode, I really don't feel like its where I should be. I have this nagging feeling in the back of my mind that one of these days (likely soon), I'm going to run into something that i won't be able to figure out and i'll have days worth of downtime. Just the other day, for example, I realized that one of my domains wasn't sending emails. After 4(!) hours looking into the problem, I still can't get sendmail or postfix to work. Four hours!! I want to be a Drupal expert, not a Ubuntu expert That's really the heart of my problem: I spend way too much time learning Ubuntu's ins-and-outs, and not nearly enough time working on Drupal. So here goes: Is there a web host out there anywhere that offers the speed of Linode, but will let me focus on Drupal instead of sys-admin-ing? Thanks! [ I know, I know. There are going to be lots of people who read this saying - "just learn Ubuntu like a real developer". And I get that. I do. But when I work full-time and try and develop some of these sites in my evenings and weekends, I'm really feeling like the sys-admin stuff gets in the way.

    Read the article

  • VirtualName-based local development host behind corporate proxy (MAMP)

    - by geerlingguy
    I am behind a corporate proxy server/firewall, and this firewall seems to not be too happy with my idea of local development. On my home computer (Mac/Leopard), I have MAMP running, with a rule in /etc/hosts that directs dev.example.com to 127.0.0.1, and I have a virtualhost set up in the httpd.conf file which works great for me. However, at work, I set up the exact same configuration, but am not able to access dev.example.com, likely due to some address/DNS translation going on via the proxy server. Here are the relevant details from Terminal: $ ping dev.example.com PING dev.example.com (127.0.0.1): 56 data bytes 64 bytes from 127.0.0.1: icmp_seq=0 ttl=64 time=0.025 ms $ host dev.example.com Host dev.example.com not found: 3(NXDOMAIN) I've tried adding dev.example.com to the list of bypass addresses in System Preferences (the 'Bypass proxy settings for these Hosts & Domains' list), but that had no effect. Is there any way I can develop locally using name-based hosts at work? I can access localhost, but can't get to the dev.example.com (or any other custom virtualhosts) here at work, which complicates other matters related to the sites on which I'm working...

    Read the article

  • newbie: Allow domain users to change power-savings settings

    - by user65007
    I've just recently installed SMS 2011 on a server and added several computers to it's domain. Now I've noticed that I cannot change power settings (even when logged in as user who is in Domain Administrator role, let's call it Admin for future reference). After some googling I ended up adding Admin to the local administrators group using Group Policy Management Editor (as I have no experience in server administration I'm not sure I did it right: I went to Policy Management, selected Forest: xxxxx - Domains - xxxxx - Group Policy Objects - Windows SBS Client - Windows 7 and Windows Vista Policy - go to Settings tab on the right and right-click on anything and select Edit to go to Group Policy Mangement Editor - User Configuration - Preferences - Control Panel Settings - Local Users and Groups - right-click on it and select New - Local Group, then set Action to "Update", Group Name to "Administrators (built-in)", and added Admin to Members). After that I was able to change the power-savings settings on client computers(when logged in as Admin). Now the question: what should I do to allow any domain user to change this settings? Notice, I do not want to force some predefined power plan to all computers, I want to set it up so that any domain user on any client computer would be able to select a different power plan and to make any adjustments to the selected one. Thank you for any suggestions, just keep in mind that I'm newbie (but not completely dumb), so please answer accordingly :)

    Read the article

  • Euro character messed up during FTP transfer

    - by djechelon
    My customer is using a very outdated ecommerce management system on my hosting service. For that product, no support is being provided anymore by the vendor. Brief explanation: the shop website, that claims to run under LAMP stack, is built by an old Visual Basic Windows application running on MS Access. The user constructs the shop, defines the HTML template, adds products and categories, etc. Then the VB exe builds the PHP pages (one for each template page) and the SQL script to run on MySQL. It also uploads everything via FTP and runs the installation/upgrade script on its own. The problem Browsing the website, many products' descriptions are cut before the euro sign. For example, what was supposed to be "Product price €1000" becomes "Product price" The analysis MySQL contains a cutted description until the € sign, so it's not PHP fault The Access databases contain full description with € sign, so it's not fault of the webmaster writing bad description or eDisplay cutting them The SQL that will run once the site gets uploaded, stored on my local machine before upload, contains the € sign The same script, after being FTPed by eDisplay and opened with nano from SSH, shows the € sign messed up like this: ^À vsftpd log reports (obfuscated for privacy) Sat Dec 15 11:16:57 2012 22 xxx.xxx.128.13 1112727 /srv/www/domains/xxxxxx.it/htdocs/db.sql b _ i r xxxxxxx ftp 0 * c which seems to be a binary transfer (and also a huge security vulnerability because you can download the whole database from unauthenticated HTTP) The eDisplay internal FTP client provides no option for ascii/binary transfer modes [Add] Trying to manually upload the SQL file via SFTP shows messing up euro [Add2] Trying to manually upload using Xftp client with explicit ASCII mode doesn't fix too It looks like the file gets uploaded as binary. Perhaps on the customer's previous host it all worked fine because that was a Windows host. The server It's an Azure virtual machine running openSUSE 12.2 with both vsftpd and openSSH The question Without asking the customer to manually upload files using FileZilla or replacing € with &euro;, because he refuses, what can I do on server side to prevent vsftpd to screw up euro sign?

    Read the article

  • How and where do you manage your domain names?

    - by Saif Bechan
    In the past several years doing web development I often times needed to buy new domain names. I changed registrars a lot also so over the years I have multiple domain names scattered over different registrars all over the world. Now I want to bring a little structure into my business, and I am at the point that I want to be able to have easy control over my domain names in a convenient way. Does anyone have an idea on what the best way is to give structure on this. I have made some suggestions maybe you can comment on them for me. 1) Just leave it as it is I can leave everything as it is. To make adjustments I have to log into different panels, and for some registrars I have to email the changes. 2) Transfer all the domains to one registar This will cost a lot, about 10 usd per domain name. But if I can find a registar where I have full control over DNS this is worth looking at. Can you give me some comments on how you are doing things now. Maybe also which registrar you prefer on doing things.

    Read the article

  • BIND9 Forwarding by view

    - by Triztian
    Hi I think this is a simple issue, I'd like to forward only to certain IPs in the LAN network, for example I have 2 acl lists: acl "office1" { 192.168.1.15; // With internet access }; acl "production" { 192.168.1.101; // No internet access }; I know that there probably should be more efficient ways to restrict internet access, but at the moment this is what I'd like to try.Here's what I've tried in named.conf.local // Inlcude my acl definitions include "/etc/bind/acls.conf"; view "no-internet" { match-clients { production; }; include "/etc/bind/named.conf.default-zones"; zone "localdomain.com" { type master; file "/etc/bind/db.localdomain.com"; }; zone "1.168.192.in-addr.arpa" { type master; file "/etc/bind/db.192.168.1"; }; } view "internet" { match-clients { office1; }; include "/etc/bind/named.conf.default-zones"; forwarders { 201.56.59.14; // Made Up 201.56.59.15; // Made Up }; zone "localdomain.com" { type master; file "/etc/bind/db.localdomain.com"; }; zone "1.168.192.in-addr.arpa" { type master; file "/etc/bind/db.192.168.1"; }; }; As you can see I want a localdomain.com defined for every computer in my network and forward internet access to the computers in the office but not to the ones on the production floor. I've modified my conf file, however the IP in the "no-internet" acl is able to resolve the domains, even though I've rebooted the computer, flushed the DNS using ipconfig /flushdns and set my DNS Server as the only one, why is this still happening? Thanks in advance.

    Read the article

  • ProxyPass for specific vhost

    - by Steve Robbins
    I have a web server that it set up to dynamically server different document roots for different domains <VirtualHost *:80> <IfModule mod_rewrite.c> # Stage sites :: www.[document root].server.company.com => /home/www/[document root] RewriteCond %{HTTP_HOST} ^www\.[^.]+\.server\.company\.com$ RewriteRule ^(.+) %{HTTP_HOST}$1 [C] RewriteRule ^www\.([^.]+)\.server\.company\.com(.*) /home/www/$1/$2 [L] </IfModule> </VirtualHost> This makes it so that www.foo.server.company.com will serve the document root of server.company.com:/home/www/foo/ For one of these sites, I need to add a ProxyPass, but I only want it to be applied to that one site. I tried something like <VirtualHost *:80> <Directory /home/www/foo> UseCanonicalName Off ProxyPreserveHost On ProxyRequests Off ProxyPass /services http://www-test.foo.com/services ProxyPassReverse /services http://www-test.foo.com/services </Directory> </VirtualHost> But then I get these errors ProxyPreserveHost not allowed here ProxyPass|ProxyPassMatch can not have a path when defined in a location. How can I set up a ProxyPass for a single virtual host?

    Read the article

  • Google Apps routing to different servers, depending on domain

    - by Philip
    We are investigating Google Apps for Education for our group of schools. Currently, each school uses their own Exchange (2003) server. Each school has its own domain which I have added to Google Apps as additional domains. I would like to start transitioning certain staff and some new pupils over to Google Apps to start testing. In this interim phase, I need mail to be routed through Google Apps and then, if no appropriate mail box is found, route on to the individual schools depending on the recipient. I do know that it is possible to route mail that does not have an appropriate Google Apps mail account to a single server - under "Settings / E-mail Settings / General Settings / Routing / E-mail routing". This works well for a single organisation where all the extra mail is destined for one place. I do know that it is possible to set up Routes, under "Settings / E-mail Settings / Hosts" and then use rules, found under "Settigns / E-mail Settings / General Settings / Routing / Receiving Routing". I can then filter based on e-mail domain and forward on to the necessary server. My problem with this, as I understand it, is that it ignores the users that have Google Apps accounts set up and sends all mail to the Exchange server. Are there any solutions for this predicament? Many thanks!

    Read the article

  • How can I diagnose what's causing Outlook 2007 when sending an attachment to fail with error 800CCC0F even though the message was sent?

    - by James
    As the title suggests, I've got an issue where outlook 2007 is reporting it failed to send email with error 800ccc0f (unexpectedly terminated connection) but only with attachments. The email is actually sent, but outlook keeps retrying (stays in the outbox), generating more emails to the original recipient (which do get delivered) I've got QMail on the server side supporting a half dozen domains. It doesn't appear to matter which account I send from. I can successfully send attachments via alternate mail clients (webmail, thunderbird) while outlook is failing, or send messages without attachments; so it's seemingly not the accounts themselves or serverside, which leaves outlook as the culprit. There doesn't appear to be any pattern to the failures, and it's not consistent (I successfully sent an attachment as recently as 3 weeks ago) so I'm at a loss as to where to look. Qmail logs don't look any different between successes and failures. Has anybody seen this before/have a solution? UPDATE : It appears it's only PDF files that this occurs with, so I'm even more stumped. I can send html/docx/txt and zip, UNLESS the zip file contains a pdf ... whiskey tango foxtrot

    Read the article

  • Using Google Voice with an internal SIP Server

    - by BHelman
    Let me be upfront and say first that I am new to the entire details of VoIP. My former understanding was just the extent of Skype. Don't worry, I understand a lot more of it now. The situation is this. I have a Google number that is actually very close to the area in which I live. It's convenient as it is not long distance for everyone. I love its features and etc, but I want it to forward to a VoIP phone, which will be my residential phone. Obviously, Google does not allow forwarding calls to domains (yet). So I use SIPGate with a SIPGate number to forward to a softphone for now. I can configure a VoIP phone to interact with my account easily enough. The problem lies with SIPGate itself really. Google Voice gives free unlimited inbound and outbound calling. SIPGate charges you for outbound. So a VoIP phone would work, but I could never make a call on it (for free). So let's say I setup an Asterisk server, or any other SIP server. What is the best way to go about linking my server to Google Voice? I looked into IPKall but it only specifies inbound calling and not outbound. Or is that just assumed? Does an SIP server handle outbound calling by itself?

    Read the article

  • Routing connections through VPN based on hostname (not IP range)

    - by Michal M
    This bugs me immensly. I need to connect to client's network through VPN. But I definitely do not want to send all the traffic through client's network so this option is out of question. What I need basically is for the OS to know that all client's network subdomains (*.example.com) need to go through the VPN connection. I tried a couple of options: Changing order of services and setting the VPN on top, but this works the same as "Send all traffic over VPN connection". Using "VPN on Demand" option from network advanced options, but this feature is quite rubbish to be honest. Seems to work only in Safari (?!) and it doesn't route the connection, but it basically triggers the OS to connect to the selected VPN. The reason I need it to work based on hostnames rather than IP range is simple - my client has a lot of servers inside his network and it's impossible for me to remember all IPs. They are all within a range, but this doesn't help me remembering. Another option would be to put the VPN connection on the bottom of network services and untick "Send all traffic..." and then put all known hostnames in hosts file, but considering there could be hundreds of servers (therefore hostnames and ips too) it ridiculous job. And if new server appears on the network I'd need to edit the hosts file again. Sisyphean labours. However this works on Windows very simply. If a hostname is not available through default network interface, then it seems to try VPN connection and this works brilliantly. So, how can I achieve that on Mac, then? I know client's internal DNS addresses if that is of any help (like directing a certain domains through a different DNS)? PS. Using latest version 10.6.6. PS2. I am using VPN to access intranet, version control servers (svn://), samba shares and for SSH access to servers.

    Read the article

  • Several web applications on a single port

    - by Nevermind
    We're developing an online browser-based game. The game itself is a plugin in the web page, that uses TCP connection to a game server, and also sends http requests to "content server" web application. This makes 3 servers total: the site itself, game server and content server. Site and content server are IIS web applications, game server is a custom application communicating over TCP with proprietary protocol. While the game is in beta stage, all these servers are physically hosted on a single machine, and distinguished by ports. For example, website is game.example.com:80, game server is game.example.com:34285 and content server is game.example.com:50000. This works OK most of the time, but some of our players have ports other than 80 closed. Is there any way to make all these application work through port 80, while still having them one one physical server? Maybe using different sub-domains? There's probably a way to make IIS forward requests to different web applications based on URL alone, but that doesn't help with game server. Edit Server is Windows Server 2008, IIS 7

    Read the article

  • Set document root for external subdomain (A Record) via htaccess

    - by 1nsane
    I have a managed server (unable to control apache settings) with the default document root of: /var/www I have a web app running in: /var/www/subdomains/app/webroot I have a dedicated domain managed by the host that has the aforementioned webroot which works perfectly. I would like to allow externally provisioned domains to point to the server/web app via A Record config. If I access the site via IP, it takes me to the index located in /var/www. I would like to configure the .htaccess in my /var/www directory to rewrite requests from the external subdomain to the /var/www/subdomains/app/webroot directory. I've done so using the following rules: RewriteCond %{HTTP_HOST} external\.domain\.com$ [NC] RewriteRule ^(.*)$ /var/www/subdomains/app/webroot/index.php?url=$1 [L,QSA] When accessing external.domain.com, the app loads properly, but the paths to things like CSS files, images, etc. are prefixed with "/subdomains/app/", causing broken links. I've tried changing the RewriteBase (both in /var/www and /var/www/subdomains/app/webroot), as I believe that's what it's designed for - but no luck. Any ideas? FYI the app is built on CakePHP. Thanks

    Read the article

  • Nginx vhost configuration

    - by user101494
    I am attempting to setup a new server with Nginx 1.0.10 on debian 6. The config below works perfectly on a server with nginx 0.8.36 on Ubuntu 10.04.3 but not on the new box. The desired result is to: Redirect non-www request on the tld to www, but not not subdomains Use the the folder structure /var/www/[domain]/htdocs /var/www/[domain]/subdomains/[subdomain]/htdocs Serve files any host for which files exist in this structure On the new server domains are matching correctly but subdomains are matching to /var/www/[subdomain].[domain]/htdocs not /var/www/[domain]/subdomains/[subdomain]/htdocs server { listen 80; server_name _________ ~^[^.]+\.[^.]+$; rewrite ^(.*)$ $scheme://www.$host$1 permanent; } server { listen 80; server_name _ ~^www\.(?<domain>.+)$; server_name_in_redirect off; location / { root /var/www/$domain/htdocs; index index.html index.htm index.php; fastcgi_index index.php; } location ~ \.php$ { include /etc/nginx/fastcgi_params; keepalive_timeout 0; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; } location ~ /\.ht { deny all; } } server { listen 80; server_name __ ~^(?<subdomain>\.)?(?<domain>.+)$$; server_name_in_redirect off; location / { root /var/www/$domain/subdomains/$subdomain/htdocs; index index.html index.htm index.php; fastcgi_index index.php; } location ~ \.php$ { include /etc/nginx/fastcgi_params; keepalive_timeout 0; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; } location ~ /\.ht { deny all; } }

    Read the article

  • Adding a 2008 server to a 2003 Domain with DNS devolution?

    - by mvdwege
    I'm running into a problem adding a 2008 server to our existing 2003 domain, and as I am not a Windows admin, I'm not getting the problem here. Some reading around on Technet seems to indicate that DNS devolution is the issue. Here's the setup: DNS for the entire company is hosted on a Unix server running Bind, including the service records for the Windows domain. Our toplevel is company.local, and functional domains are in subdomains, such as mgt.company.local (our management servers). Our Windows servers live mostly in office.company.local, but some of them live in .mgt.company.local and .customers.company.local. The 2003 servers all succesfully authenticate against company.local as the Windows domain. Their position in the infrastructure is set by setting the primary DNS suffix under the network settings and the computer name dialog. Trying to do the same with a brand new 2008 install throws an error though: "Changing the Primary Domain DNS name of this computer to office.company.local failed [...] The specified server cannot perform the requested operation" I tried googling, but the closest I came was the Technet article on DNS Devolution, and I can't make heads nor tails on how to apply that to my case. Addendum 2012-10-23: The problem is not joining the domain, that works, the problem is that it joins with the wrong name, as .company.local, instead of .office.company.local. So far everything works, but I'm rather afraid to run production like this, because sooner or later something is going to complain about the AD name not matching DNS.

    Read the article

  • Domain name is bringing up wrong site

    - by daniel0mullins
    I have a VPS that hosts several domains. I have set up Apache in the following manner: First VirtualHost /etc/apache2/sites-available/somedomain.com <VirtualHost somedomain.com:80> ServerName somedomain.com ServerAlias www.somedomain.com ... </VirtualHost> Second VirtualHost /etc/apache2/sites-available/someotherdomain.com <VirtualHost someotherdomain.com:80> ServerName someotherdomain.com ServerAlias www.someotherdomain.com ... </VirtualHost> Then I symlink the config files from sites-available to sites-enabled and all is well. I had a need to 'turn off' someotherdomain.com, so I removed the symlink to /etc/apache2/sites-available/someotherdomain.com from sites-enabled and the site no longer shows up... BUT typing someotherdomain.com into a web browser brings up somedomain.com!!! I need it to not resolve at all. Does somethiing need to be done in the VirtualHost to just automatically return a 500 or something along those lines. I really don't want people to reach one website from a different domain. Thanks! EDIT ports.conf looks like this NameVirtualHost *:80 Listen 80 <IfModule mod_ssl.c> NameVirtualHost *:443 Listen 443 </IfModule> <IfModule mod_gnutls.c> Listen 443 </IfModule>

    Read the article

  • Linq 2 SQL using base class and WCF

    - by Gena Verdel
    Hi all. I have the following problem: I'm using L2S for generating entity classes. All these classes share the same property ID which is autonumber. So I figured to put this property to base class and extend all entity classes from the base one. In order to be able to read the value I'm using the override modifier on this property in each and every entity class. Up to now it's live and kicking. Then I decided to introduce another tier - services using WCF approach. I've modified the Serialization mode to Unidirectional (and added the IsReference=true attribute to enable two directions), also added [DataContract] attribute to the BaseObject class. WCF is able to transport the whole object but one property , which is ID. Applying [DataMember] attribute on ID property at the base class resulted in nothing. Am I missing something? Is what I'm trying to achieve possible at all? [DataContract()] abstract public class BaseObject : IIccObject public virtual long ID { get; set; } [Table(Name="dbo.Blocks")] [DataContract(IsReference=true)] public partial class Block : INotifyPropertyChanging, INotifyPropertyChanged { private static PropertyChangingEventArgs emptyChangingEventArgs = new PropertyChangingEventArgs(String.Empty); private long _ID; private int _StatusID; private string _Name; private bool _IsWithControlPoints; private long _DivisionID; private string _SHAPE; private EntitySet<BlockByWorkstation> _BlockByWorkstations; private EntitySet<PlanningPointAppropriation> _PlanningPointAppropriations; private EntitySet<Neighbor> _Neighbors; private EntitySet<Neighbor> _Neighbors1; private EntitySet<Task> _Tasks; private EntitySet<PlanningPointByBlock> _PlanningPointByBlocks; private EntityRef<Division> _Division; private bool serializing; #region Extensibility Method Definitions partial void OnLoaded(); partial void OnValidate(System.Data.Linq.ChangeAction action); partial void OnCreated(); partial void OnIDChanging(long value); partial void OnIDChanged(); partial void OnStatusIDChanging(int value); partial void OnStatusIDChanged(); partial void OnNameChanging(string value); partial void OnNameChanged(); partial void OnIsWithControlPointsChanging(bool value); partial void OnIsWithControlPointsChanged(); partial void OnDivisionIDChanging(long value); partial void OnDivisionIDChanged(); partial void OnSHAPEChanging(string value); partial void OnSHAPEChanged(); #endregion public Block() { this.Initialize(); } [Column(Storage="_ID", AutoSync=AutoSync.OnInsert, DbType="BigInt NOT NULL IDENTITY", IsPrimaryKey=true, IsDbGenerated=true)] [DataMember(Order=1)] public override long ID { get { return this._ID; } set { if ((this._ID != value)) { this.OnIDChanging(value); this.SendPropertyChanging(); this._ID = value; this.SendPropertyChanged("ID"); this.OnIDChanged(); } } } [Column(Storage="_StatusID", DbType="Int NOT NULL")] [DataMember(Order=2)] public int StatusID { get { return this._StatusID; } set { if ((this._StatusID != value)) { this.OnStatusIDChanging(value); this.SendPropertyChanging(); this._StatusID = value; this.SendPropertyChanged("StatusID"); this.OnStatusIDChanged(); } } } [Column(Storage="_Name", DbType="NVarChar(255)")] [DataMember(Order=3)] public string Name { get { return this._Name; } set { if ((this._Name != value)) { this.OnNameChanging(value); this.SendPropertyChanging(); this._Name = value; this.SendPropertyChanged("Name"); this.OnNameChanged(); } } } [Column(Storage="_IsWithControlPoints", DbType="Bit NOT NULL")] [DataMember(Order=4)] public bool IsWithControlPoints { get { return this._IsWithControlPoints; } set { if ((this._IsWithControlPoints != value)) { this.OnIsWithControlPointsChanging(value); this.SendPropertyChanging(); this._IsWithControlPoints = value; this.SendPropertyChanged("IsWithControlPoints"); this.OnIsWithControlPointsChanged(); } } } [Column(Storage="_DivisionID", DbType="BigInt NOT NULL")] [DataMember(Order=5)] public long DivisionID { get { return this._DivisionID; } set { if ((this._DivisionID != value)) { if (this._Division.HasLoadedOrAssignedValue) { throw new System.Data.Linq.ForeignKeyReferenceAlreadyHasValueException(); } this.OnDivisionIDChanging(value); this.SendPropertyChanging(); this._DivisionID = value; this.SendPropertyChanged("DivisionID"); this.OnDivisionIDChanged(); } } } [Column(Storage="_SHAPE", DbType="Text", UpdateCheck=UpdateCheck.Never)] [DataMember(Order=6)] public string SHAPE { get { return this._SHAPE; } set { if ((this._SHAPE != value)) { this.OnSHAPEChanging(value); this.SendPropertyChanging(); this._SHAPE = value; this.SendPropertyChanged("SHAPE"); this.OnSHAPEChanged(); } } } [Association(Name="Block_BlockByWorkstation", Storage="_BlockByWorkstations", ThisKey="ID", OtherKey="BlockID")] [DataMember(Order=7, EmitDefaultValue=false)] public EntitySet<BlockByWorkstation> BlockByWorkstations { get { if ((this.serializing && (this._BlockByWorkstations.HasLoadedOrAssignedValues == false))) { return null; } return this._BlockByWorkstations; } set { this._BlockByWorkstations.Assign(value); } } [Association(Name="Block_PlanningPointAppropriation", Storage="_PlanningPointAppropriations", ThisKey="ID", OtherKey="MasterBlockID")] [DataMember(Order=8, EmitDefaultValue=false)] public EntitySet<PlanningPointAppropriation> PlanningPointAppropriations { get { if ((this.serializing && (this._PlanningPointAppropriations.HasLoadedOrAssignedValues == false))) { return null; } return this._PlanningPointAppropriations; } set { this._PlanningPointAppropriations.Assign(value); } } [Association(Name="Block_Neighbor", Storage="_Neighbors", ThisKey="ID", OtherKey="FirstBlockID")] [DataMember(Order=9, EmitDefaultValue=false)] public EntitySet<Neighbor> Neighbors { get { if ((this.serializing && (this._Neighbors.HasLoadedOrAssignedValues == false))) { return null; } return this._Neighbors; } set { this._Neighbors.Assign(value); } } [Association(Name="Block_Neighbor1", Storage="_Neighbors1", ThisKey="ID", OtherKey="SecondBlockID")] [DataMember(Order=10, EmitDefaultValue=false)] public EntitySet<Neighbor> Neighbors1 { get { if ((this.serializing && (this._Neighbors1.HasLoadedOrAssignedValues == false))) { return null; } return this._Neighbors1; } set { this._Neighbors1.Assign(value); } } [Association(Name="Block_Task", Storage="_Tasks", ThisKey="ID", OtherKey="BlockID")] [DataMember(Order=11, EmitDefaultValue=false)] public EntitySet<Task> Tasks { get { if ((this.serializing && (this._Tasks.HasLoadedOrAssignedValues == false))) { return null; } return this._Tasks; } set { this._Tasks.Assign(value); } } [Association(Name="Block_PlanningPointByBlock", Storage="_PlanningPointByBlocks", ThisKey="ID", OtherKey="BlockID")] [DataMember(Order=12, EmitDefaultValue=false)] public EntitySet<PlanningPointByBlock> PlanningPointByBlocks { get { if ((this.serializing && (this._PlanningPointByBlocks.HasLoadedOrAssignedValues == false))) { return null; } return this._PlanningPointByBlocks; } set { this._PlanningPointByBlocks.Assign(value); } } [Association(Name="Division_Block", Storage="_Division", ThisKey="DivisionID", OtherKey="ID", IsForeignKey=true, DeleteOnNull=true, DeleteRule="CASCADE")] public Division Division { get { return this._Division.Entity; } set { Division previousValue = this._Division.Entity; if (((previousValue != value) || (this._Division.HasLoadedOrAssignedValue == false))) { this.SendPropertyChanging(); if ((previousValue != null)) { this._Division.Entity = null; previousValue.Blocks.Remove(this); } this._Division.Entity = value; if ((value != null)) { value.Blocks.Add(this); this._DivisionID = value.ID; } else { this._DivisionID = default(long); } this.SendPropertyChanged("Division"); } } } public event PropertyChangingEventHandler PropertyChanging; public event PropertyChangedEventHandler PropertyChanged; protected virtual void SendPropertyChanging() { if ((this.PropertyChanging != null)) { this.PropertyChanging(this, emptyChangingEventArgs); } } protected virtual void SendPropertyChanged(String propertyName) { if ((this.PropertyChanged != null)) { this.PropertyChanged(this, new PropertyChangedEventArgs(propertyName)); } } private void attach_BlockByWorkstations(BlockByWorkstation entity) { this.SendPropertyChanging(); entity.Block = this; } private void detach_BlockByWorkstations(BlockByWorkstation entity) { this.SendPropertyChanging(); entity.Block = null; } private void attach_PlanningPointAppropriations(PlanningPointAppropriation entity) { this.SendPropertyChanging(); entity.Block = this; } private void detach_PlanningPointAppropriations(PlanningPointAppropriation entity) { this.SendPropertyChanging(); entity.Block = null; } private void attach_Neighbors(Neighbor entity) { this.SendPropertyChanging(); entity.FirstBlock = this; } private void detach_Neighbors(Neighbor entity) { this.SendPropertyChanging(); entity.FirstBlock = null; } private void attach_Neighbors1(Neighbor entity) { this.SendPropertyChanging(); entity.SecondBlock = this; } private void detach_Neighbors1(Neighbor entity) { this.SendPropertyChanging(); entity.SecondBlock = null; } private void attach_Tasks(Task entity) { this.SendPropertyChanging(); entity.Block = this; } private void detach_Tasks(Task entity) { this.SendPropertyChanging(); entity.Block = null; } private void attach_PlanningPointByBlocks(PlanningPointByBlock entity) { this.SendPropertyChanging(); entity.Block = this; } private void detach_PlanningPointByBlocks(PlanningPointByBlock entity) { this.SendPropertyChanging(); entity.Block = null; } private void Initialize() { this._BlockByWorkstations = new EntitySet<BlockByWorkstation>(new Action<BlockByWorkstation>(this.attach_BlockByWorkstations), new Action<BlockByWorkstation>(this.detach_BlockByWorkstations)); this._PlanningPointAppropriations = new EntitySet<PlanningPointAppropriation>(new Action<PlanningPointAppropriation>(this.attach_PlanningPointAppropriations), new Action<PlanningPointAppropriation>(this.detach_PlanningPointAppropriations)); this._Neighbors = new EntitySet<Neighbor>(new Action<Neighbor>(this.attach_Neighbors), new Action<Neighbor>(this.detach_Neighbors)); this._Neighbors1 = new EntitySet<Neighbor>(new Action<Neighbor>(this.attach_Neighbors1), new Action<Neighbor>(this.detach_Neighbors1)); this._Tasks = new EntitySet<Task>(new Action<Task>(this.attach_Tasks), new Action<Task>(this.detach_Tasks)); this._PlanningPointByBlocks = new EntitySet<PlanningPointByBlock>(new Action<PlanningPointByBlock>(this.attach_PlanningPointByBlocks), new Action<PlanningPointByBlock>(this.detach_PlanningPointByBlocks)); this._Division = default(EntityRef<Division>); OnCreated(); } [OnDeserializing()] [System.ComponentModel.EditorBrowsableAttribute(EditorBrowsableState.Never)] public void OnDeserializing(StreamingContext context) { this.Initialize(); } [OnSerializing()] [System.ComponentModel.EditorBrowsableAttribute(EditorBrowsableState.Never)] public void OnSerializing(StreamingContext context) { this.serializing = true; } [OnSerialized()] [System.ComponentModel.EditorBrowsableAttribute(EditorBrowsableState.Never)] public void OnSerialized(StreamingContext context) { this.serializing = false; } }

    Read the article

  • s3fs Input/output error

    - by shadow_of__soul
    i'm trying to set up a backup system with s3fs and the amazon s3 service. i followed this 2 guides: http://qugstart.com/blog/linux/how-to-mount-an-amazon-s3-bucket-as-virtual-drive-on-centos-5-2/ http://blog.eberly.org/2008/10/27/how-i-automated-my-backups-to-amazon-s3-using-rsync/ anyway making a tail to the /var/log/messages i get: Aug 28 13:37:46 server s3fs:###response=403 i already tried creating the authentication file on /etc/passwd-s3fs and setting there the access and private key, passing it trough the command line, i checked several times the credentials and i used it with s3fox, and is working. i also have set the time of the machine (with the date command) to be the same as the amazon S3 servers (i got the time of the S3 server uploading a file with the file manager) not only rsync don't work, commands like ls or cp in the /mnt/s3 didn't work also. any help of how i can solve/debug this? Regards, Shadow.

    Read the article

  • Hyper-V and Hyper-threading: On or off?

    - by CapBBeard
    Hey all, With the new Xeon CPUs supporting Hyper-threading, what is the current wisdom with regard to using it (or not) on a Hyper-V host machine? I was originally under the impression that turning it on in a virtual host environment could be detrimental as the 'extra' CPUs were not true cores. However I've also read (unconfirmed) comments along the lines of MS doing some hard work to get Hyper-V running well in a Hyper-threading environment. Does anyone have any solid information or experience in this regard? Cheers!

    Read the article

< Previous Page | 312 313 314 315 316 317 318 319 320 321 322 323  | Next Page >