Search Results

Search found 8828 results on 354 pages for 'the pc samurai'.

Page 318/354 | < Previous Page | 314 315 316 317 318 319 320 321 322 323 324 325  | Next Page >

• Ethernet cable unplugged after updating from windows 8.0 to 8.1

  - by Pehmolelu

  Yeah, so I went and updated my windows 8 pro to 8.1. Now everything else seems to work but the network. The Ethernet just says that Network cable is unplugged, even though it is plugged and I have tried different cord as well and I have tested that the router works. I have tried uninstalling the network drivers (Realtec PCIe GBE) and reinstall them with no success. After installing drivers the Device Management gives error for it "Device could not be started. Code 10" Before 8.1 update I had rt630x64.inf, after update it was netrt630x64.inf, and after installing the latest driver rt630x64.inf. With rt630x64.inf there isn't any error, but it's still not just working. New downloaded version: 8.020.0815.2013 (From Realtek website) The driver before: 8.1.510.2013 (After updating the windows to 8.1) I'm using Desktop PC, no VM. I dont have VirtualBox or Vmware installed. I have checked from BIOS that the card is enabled. I have booted in safe mode with network enabled. Says unplugged there as well. I have put the power off for few minutes and put back on, no effect. If anyone has any kind of suggestions, please tell.

  Read the article

• Identifying test machines in analytics logs

  - by RTigger

  We're just beginning to add analytics to our SaaS application, to begin (among other things) billing clients based on usage. The problem we're running into is there's a few circumstances where our support team will simulate a log in into production to try to reproduce reported issues with a client's configuration. When they log in, an entry will be made into our analytics logs that their specific account has logged in, which we use to calculate billing. A few ideas we had to solve this: 1) We log IP addresses as well as machine keys for each PC that logs in - we could filter out known IP addresses and/or machine keys belonging to support. The drawback is we have to maintain a list of keys / addresses manually. 2) If support (or anyone else internal) runs our application in debug mode (as opposed to release), it will not report analytics. This is fine, as long as support / anyone else remembers to switch to debug mode. 3) Include some sort of reg key / similar setting required to be set when configuring a production system in order to send analytics. Again, fine, as long as our infrastructure team remembers to set the reg key or setting. All of these approaches require some sort of human involvement, which we all know can be iffy at best. Has anyone run into a similar situation? Is there an automated approach to this problem? (PS Of course, we shouldn't be testing in production, but there are a few one-off instances with customer set up that we can't reproduce without logging in as them in production. This is the only time we do so, and this is the case I'm talking about in this question.)

  Read the article

• Can't create system image. 0x80780119 error after upgrade from 8 to 8.1

  - by cichy202

  I have upgraded my Windows 8 PC to 8.1 yesterday and it seemed like everything is working fine until I tried to create System Image. I got an error 0x80780119 saying that there is to little space on one of the partitions. I started looking into this problem and indeed one of the partitions does not meet the requirements. There are following partitions on my drive: DISKPART> list partition Partition ### Type Size Offset ------------- ---------------- ------- ------- Partition 1 Recovery 300 MB 1024 KB Partition 2 System 100 MB 301 MB Partition 3 Reserved 128 MB 401 MB Partition 4 Primary 74 GB 529 MB Partition 5 Primary 390 GB 75 GB Partition 1 has only 13MB free space. Partition 2 has 70MB free space, partition 3 is MSFTRES, partition 4 is my C drive with around 35GB free and partition 5 is not included in system image. Partitions were create like this during installation of Windows 8 - clean install from scratch. I am using UEFI so the drive is GPT formatted. So I thought, OK I can resize my C drive a little, move the partitions and expand the 1st one. I tried using GParted but it is not able to move the MSFTRES partition. It does not recognize the file system on it. So the question is: Is it possible to "clean up" the 1st partition in anyway? If not, is there anything special about MSFTRES partition? Or can I just remove it and create it a little further and just flag it as msftres with GParted?

  Read the article

• FDE / SSD - partition and leave some unencrypted?

  - by Web Design Hero

  Just bought a used beast of a desktop pc. The system drive is setup as a Raid 0 SSD (Intel 510 SSD Drives) with 128 each. I will probably not have to many programs beyond office and maybe Adobe CS if I spring for it, I will be keeping big data on a regular hdd. My question is about setting up TrueCrypt with my configuration. I have not previously done full disk encryption, but I feel that its probably a good idea. I have done some speed tests using file containers on the hdd and the sdd with truecrypt. While there is a huge hit with the SSDs and Truecrypt, it still outperforms the hdd on its own by a good margin, so I think i will be okay for my needs with truecrypt. I have seen in a few places that they recommend partitioning the drive and leavign some of the SSD not inside truecrypt, does this really make a difference? If so, how much should I leave? Will there be any issue in the Raid0 configuration? I am not really concerned about all the wear leveling issue, rather loose data and be secure, but since I don't need all that space neccesarily, I would like to optimize my setup for security and speed.

  Read the article

• Does OS X support linux-like features?

  - by Xeoncross

  I have been using XP for almost a decade. Contrary to popular belief, it has served me well. In the last 4 years I don't remember ever having it crash on me. It has the most stable GUI I have ever used. However, an OS is only as good as it's GUI AND command line combined. Windows command line is awful and totally useless. So I have been using Ubuntu for a couple years and Debian on my servers. The only problem is that Gnome applications (ubuntu 6-10) constantly crash on me (Ubuntu Studio was the most unstable OS I ever used). I have high quality Gigabyte, MSI, and Asus motherboards and CPU's from old Semprons/Athlons to Celerons/Core 2 Quads. What are the odds that every PC I have ever owned can't remain stable with a linux GUI? Not to mention that Adobe CSx Suite doesn't work on linux. Anyway, I am now looking at moving to a MAC in the hope of finding a stable GUI and a feature-packed command line. Does Mac OS have an integrated command line where I can do linux-like-awesomeness like rsync, ssh, wget, crong jobs, package updates, and git without having an unstable GUI? Basically, until the linux GUI applications get a little better, is OS X what I need?

  Read the article

• Questions for anyone who has used Sun Type 7 keyboards

  - by Irinotecan

  So I noticed that Oracle is still selling Sun Type 7 keyboard and mouse packages. I was thinking of buying one for a Linux box at my house so I had easy access to some of the extra keys such as Compose and Alt-GR. I have some questions though before I do for anyone who has used these -- it's been a very long time since I've used an actual Sun keyboard. They show that both a PC and UNIX layout is available. Unfortunately, I cannot find anywhere a clear picture of both layouts to determine the difference. Can anyone post pictures of the 2 different layouts for me to take a look at? I don't remember what some of the "Solaris shortcut" keys do, like Props, Front, Stop, and Again. Are these vestiges from OpenWindows? Do they have any usage on a modern Solaris like OpenSolaris running Gnome? Do they automatically map to anything useful on Linux, or am I going to have to map them myself to something with XModMap? When I last used a Sun keyboard, I remember it having a rather mushy feel to it, so I am wondering if any touch typists could weigh in on whether this keyboard "feels nice" for day to day touch typing. Thanks!

  Read the article

• Windows 7, Black screen with cursor, impossible to logon

  - by PJC

  First - I have gone through as many possible solutions I've found here and elsewhere. [Edit - to describe the issue in more detail, the PC appears to boot correctly, but instead of the logon screen, I have been getting a black screen WITH the pointer cursor, and it responds correctly to the mouse. Pressing CTL-ALT-DEL brings up the logon screen's background, but with no logon area nor any other content. This screen was at the full resolution before I uninstalled the graphics driver in safe-mode.] I also just ran a full up-to-date AVG scan from boot media. [Edit - the AVG scan, which was updated to today's virus signatures, found no issues at all.] So - steps I've tried: Safe Boot, Restore from before the issue - done, no help. Uninstall the graphics driver - done, now i have a 1024x768 fallback screen, still no way in. sfc /scannow - only doable from Safe boot obviously, but no change. [Edit - booting from restore media, performing a startup repair and...]Restore further back - restored to 2 days ago, and I'd had many reboots since then with no problem. Enable autologin to try to get beyond the login screen - done, doesn't work. It seems the best advice is complete reinstall, but I really don't want to do that because it'll take 3-4 days to add all the apps I use. Some key points to note - in both states - before and after removing the video driver, I always had a mouse cursor on the screen. CTL-ALT-DEL flashes up the login background, but no login info. I can (and often do) reinstall from scratch, but was at a fairly stable state before this, and would prefer not to. -Paul

  Read the article

• Grub Installation Failed: Fatal Error ... now what I do?

  - by eklavya

  I know there are some threads that touch this but I feel I have done something uniquely stupid. hence the post and plea for help. I am a beginner @ Linux. So I have a PC with a HDD (hard disk drive) and SSD (solid state drive) It was running Linux Mint /dev/sda1 - HDD Partition 1 - 2 TB (mounted this is /home /dev/sda2 - HDD Partition 2 - 1 TB (separate back up drive, i was backing up files to this) /dev/sdb1 - SSD Partition 1 - 100 GB (OS) /dev/sdb2 - SSD Partition 2 - 20 GB (Swap) The operating system was Linux Mint and was installed on the /dev/sdb1 i.e the solid state drive. I had partitioned off the sda into 2 TB and 1TB and presented the 2 TB as the /home to the OS. Anyway last night I decided to make a return to Ubuntu via the path of Elementary OS. Everything went fine with the install until it stated that GRUB installed failed and this was a Fatal error (no kidding I said). No I am stuck. I have definitely done something wrong and don't know what it is... My biggest pain is the files on the /dev/sda2. I want to save these before I try something drastic like wiping off the /dev/sda completely. So I have the following questions... Can I use a liveCD USB to save these files ? I can see the /dev/sda2 but was unable to access the files in the liveCD last not least ... how do I fix the main issue here. Why could the OS not install GRUB 2b... why is my SSD the /dev/sdb ... and not /dev/sda. Does that have something to do with it that my master boot record sits on the HDD /dev/sda and not /dev/sdb

  Read the article

• Windows 8 not shutting down properly

  - by Patrick

  Since installing Windows 8, the computer hasn't been shutting down properly. When selecting to power down, the PC quickly displays the shutting down screen, the monitor powers off, and the computer remains on but unresponsive. After about 5 minutes, the computer will turn off. Upon booting into windows again, I am informed that Windows didn't properly shut down. I'm running a fast SSD, and it's a clean install of Windows 8, so there's no way Windows is taking that time to do some sort of hibernate on shutdown or whatever - not to mention the error when entering Windows the next time. This happens on every shut down. Restart works as expected. EDIT: Formatting again didn't work. Fails regardless of drivers installed. Event viewer Always these two messages in close succession: Error (event ID 6008): The previous system shutdown at 7:45:21 PM on ?27/?10/?2012 was unexpected. Critical (kernel power, event ID 41): The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.

  Read the article

• RDP with multiple monitors, display preferences get reset?

  - by Martijn Kooij

  Problem: When I connect to my pc at the office via RDP all the application windows I had previously carefully placed on either monitor 1 or 2 will be "scrambled". Either all applications show on monitor 1 and monitor 2 is empty, or they have switched 1 <- 2. Expected behaviour: When I connect I see all the application windows on exactly the same position and in the exact same size as I left them the night before. I have the exact same monitors at home as I have at work: Primary 2560x1440, Secondary 900x1440. Yesterday I tried switching the physical cables on the host machine hoping that the hardware order of the monitors was the difference. But this morning my secondary monitor was completely blank, not even the taskbar (which I had set to ONLY show on the secondary). Somewhere there must be something to help Windows understand which physical monitor is which virtual RDP monitor is which RDP "server" monitor... Are there more options than switching the cables? This one has been bothering me for a long long time now, I hope someone has a solution or workaround for me. Edit I want to use both monitors, so I have checked the "Use all monitors" setting in the RDP client. For example I leave my mail and total commander on the right monitor, and visual studio and Firefox on the left monitor. When I connect to RDP I want to see those applications on the same positions and sizes.

  Read the article

• I really need help resolving a Window Vista BSOD (Blue Screen Crash) on my desktop

  - by anonymous

  Hi, thanks for taking the time to read this. I'll get straight to the details. My desktop is on the fritz; it keeps going to blue screen with the stop message of 0x0000007E immediately after the loading bar of vista, right before transitioning to the account selection screen. My desktop runs on a dual-core 32-bit processor with windows Vista Home(?) installed. I have 3 GB of ram as two separate modules, a 1GB acer module and a 2GB geil module. I have an ati video card, unfortunately I cannot recall the exact name but the chipset is ATI and the manufacturer is Sapphire and the card is on the lower end. My hard drive is 320GB (i think) partitioned into two. The C:\ partition is red lined, while the D:\ partition is still pretty empty. As per the advice of my friend, i tried restarting the system with the graphics card removed. Upon failure, i repeated the process removing one RAM module one at a time, but the system still failed to load. Vista would attempt to repair the system and it would initially report that the system was fixed, but vista really failed to fix the problem. After removing the memory modules, vista started to report it's inability to fix the problem. I tried running on safe mode and the driver listing would always stop at crcdisk.sys. I ran memory diagnostics using the windows memory diagnostic tool found in the screen after vista's failed attempt to fix the problem with no luck. the problem details are as such: Problem Event Name : StartupRepairV2 Problem Signature 01: AutoFailover 02: (vista's version number?) 03: 6 04: 720907 05: 0x7e 06: 0x7e 07: 0 08: 2 09: WrpRepair 10: 0 OS Version: 6.0.6000.2.0.0.256.1 Locale ID 1033 any correct advice would be appreciated as i really need my pc to work so i can work on my projects. kinda sad, but i'm college of computer science and i have no idea what to do :P

  Read the article

• Windows 7 Account Settings Vanished

  - by Roy Tang

  So I came home and stumbled upon a bit of a mystery. When I got home my brother was using my desktop PC that was running Windows 7 (I have accounts for my 2 brothers and my mom on the machine, but mine is the only admin account). After he finished his game he logged out and I logged in to my account, but found only strangeness. My windows account seems to have been somewhat "reset", meaning: my quick launch shortcuts were gone my dropbox account did not automatically login my pidgin accounts were no longer there I had to relogin Steam iTunes could not launch (I had hooked up my iDevice before logging in) The Documents/Pictures/Music shortcuts in the start menu no longer work However, despite that: my desktop wallpaper was still correct my documents folder was still there in c:\Users\my account name\My Documents as expected Google Chrome settings seem to have been retained other accounts on the same machine seem to be fine I asked my brother if he had installed anything strange during the day, he only installed Yahoo Messenger. I last used the machine around 24 hours ago and it was fine then. I'm not sure what else has been affected. I'm inclined to just create a new admin user for me to use, but I'd like to have some idea of what actually happened.

  Read the article

• How to "open" existing VMs in Hyper-V without importing them?

  - by Borek

  I had a PC with two physical disks: C: containing the host operating system D: containing a folder D:\VMs where all my virtual machines were stored Now, the C: disk died. I bought a new one, reinstalled Windows on it, enabled Hyper-V feature and now I just need to open the VMs from the D:\VMs folder. However, I don't seem to be able to find a menu item or anything that would allow me to do that - the only thing I see is the "import" command which unfortunately requires the VMs to be explicitly exported (my machines weren't). I firmly believe that when I have all the files constituting a VM (the VHD file, some XML files describing the settings etc.) it must be somehow possible to just "open" these existing VMs in Hyper-V, right? What command am I missing? Edit: I know I can create a blank virtual machines and then just point them to use existing VHDs. However, I am not sure about all the different settings I've made to those VMs so I hope there's a way to simply open those existing VMs instead of recreating them.

  Read the article

• Powerpoint not drawing in slide properly...

  - by commradepolski

  So got another issue to post about. I have a user here who uses powerpoint a lot, Office 07 with SP2. When he opens up the presentation, powerpoint opens fine without errors, but does not draw in the main slide properly. So to better explain that, the list on the left hand side, that shows the slides and what order they are in, loads up fine. You can see the slides and the content etc. When you click on a slide, to edit it, it does not draw in on the editing screen. Not really sure how to explain that. The screen where the work on the slide is done, is what is affected. This is a screen shot from my pc not the users. So instead of the screen saying "Click to add title" it would be improperly drawn such that if I were to drag an explorer window across it, it would leave a trail. I have tried reinstalling office, updating it, as well as giving the user a new windows image and nothing has helped. Any help or advice is appreciated.

  Read the article

• Exchange 2010 UR3 - customizing OWA logon page

  - by STGdb

  I have an Exchange 2010 UR3 deployment that I need to customize the OWA logon page for. I've created a new LGNTOPL.GIF file to replace the existing one in the folder: “C:\Program Files\Microsoft\Exchange Server\V14\ClientAccess\Owa\14.3.158.1\themes\resources” When I bring up OWA, I still get the original “Outlook Web App” logo. I’ve searched and found a couple of other instances of LGNTOPL.GIF in the directories: “C:\Program Files\Microsoft\Exchange Server\V14\ClientAccess\Owa\14.3.123.3\themes\resources” “C:\Program Files\Microsoft\Exchange Server\V14\ClientAccess\Owa\14.3.146.0\themes\resources” “C:\Program Files\Microsoft\Exchange Server\V14\ClientAccess\Owa\Current\themes\resources” I’ve replaced the LGNTOPL.GIF file in each of the above directories but got the same results. I’ve tried clearing my browser cache and even using multiple browsers from multiple PC’s but the same results. I’ve even tried making my GIF file the same pixel size as the original LGNTOPL.GIF logo but still the same results. I’ve tried restarting IIS on the CAS server and restarting the server but same results. Has something changed with Exchange 2010 UR3 when trying to customize OWA? I don't see anything documented about any change to OWA customization. Thanks

  Read the article

• I have to manually change the DNS suffix order every time I connect to VPN. Can I change this permanently or fix the problem somehow?

  - by CarlB

  Sorry in advance but I'm a programmer, not a network engineer, so I'm a noob at this stuff. Anyway, when I am not connected to VPN from my work PC at home, I have the following DNS suffixes listed (real domain names substituted): enterprise.org network.org company.com us.enterprise.org After connecting to VPN, one more DNS suffix is added to the very top of the list: problem-domain.com At this point, most network functions that I can normally perform when actually connected to the LAN in the office are unusable. I get error messages about the network paths not being found and what-not. Anyway, I played around with the suffixes and realized that if I just moved problem-domain.com down one spot to the second in the list, all the problems went away. Unfortunately, it returns to the top spot every time I reconnect, and I tend to get disconnected frequently. Is there something else I can do about this or should I just contact the IT department? I've had this problem before and they weren't able to resolve it but I suppose it would be worth trying again if I could get a different person on the job. What I don't understand is that I thought it didn't matter what order the suffixes were in? Isn't Windows supposed to go through each suffix until it finds a match (or has gone through all the suffixes)? Why is it quitting after the first one? Thanks in advance.

  Read the article

• Printer spools but doesn't print

  - by DKNUCKLES

  I am having a bizarre issue with an end user who is unable to print to a USB attached printer. The environment is as Windows 7 machine with a Canon Pixma iP90 printer. The driver is installed (and has been re-installed several times), but whenever a print job is sent the printer spools but no printing ever occurs. The following is some relevant information I can confirm that the printer is spooling as the spool folder fills up, and the job "releases" and the spool folder empties I have turned off print spooling with no luck None of the features from the Canon utilities (ie Turn Printer Off) features work Computer recognizes the printer as being installed. When the cable is unplugged the printer icon grey's out in Devices and Printers Printer and cable are confirmed working as they work with other PC's in the office I have deleted the USB Root Hub devices and rebooted the machine with no luck No error messages are displayed or logged in the event viewer. The Canon diagnostics utility doesn't detect any problem and states the printer is functioning properly Printer is not shared User is able to print to other shared printers in the office Any help with this issue would be greatly appreciated.

  Read the article

• How many guesses per second are possible against an encrypted disk? [closed]

  - by HappyDeveloper

  I understand that guesses per second depends on the hardware and the encryption algorithm, so I don't expect an absolute number as answer. For example, with an average machine you can make a lot (thousands?) of guesses per second for a hash created with a single md5 round, because md5 is fast, making brute force and dictionary attacks a real danger for most passwords. But if instead you use bcrypt with enough rounds, you can slow the attack down to 1 guess per second, for example. 1) So how does disk encryption usually work? This is how I imagine it, tell me if it is close to reality: When I enter the passphrase, it is hashed with a slow algorithm to generate a key (always the same?). Because this is slow, brute force is not a good approach to break it. Then, with the generated key, the disk is unencrypted on the fly very fast, so there is not a significant performance lose. 2) How can I test this with my own machine? I want to calculate the guesses per second my machine can make. 3) How many guesses per second are possible against an encrypted disk with the fastest PC ever so far?

  Read the article

• How to prevent response to who-has requests on virtual eth interface?

  - by user42881

  Hi, we use small embedded X86 linux servers equipped with a single physical ethernet port as a gateway for an IP video surveillance application. Each downstream IP cam is mapped to a separate virtual IP address like this: real eth0 IP address= 192.168.1.1, camera 1 (eth0:1) =192.168.1.61, camera 2 (eth0:2) =192.168.1.62, etc. etc. all on the same eth0 physical port. This approach works well, except that a specific third-party windows video recording application running on a separate PC on the same LAN, automatically pings the virtual IPs looking for unique who-has responses on system startup and, when it gets back the same eth0 MAC address for each virtual interface, freaks out and won't allow us to subsequently manually enter those addresses. The windows app doesn't mind, tho, if it receives no answer to the who-has ping. My question - how can we either (a) shut off the who-has responses just for the virtual eth0:x interfaces while keeping them for the primary physical eth0 port, or, in the alternative, spoof a valid but different MAC address for each virtual interface? Thanks!

  Read the article

• Local traffic through VPN, global traffic through WAN

  - by ikonoma

  I have an issue with my internet connection. I am using VPN (Aventail Client) to access the local resources. When connected to VPN the Internet traffic passes through it, not through my LAN or Wi-Fi network. I would like to change the routing table to use the Wi-Fi adapter of the PC for WAN traffic. I have routing file, which works very well and routes the traffic in this way, but only when I am physically connected to the local network through LAN. But I can't set it to work with the VPN connection, because I have no gateway when I am connected to it. Etc this in bold is missing. What to do? route change 0.0.0.0 mask 0.0.0.0 172.16.76.1 metric 200 if 12 route change 0.0.0.0 mask 0.0.0.0 10.44.2.1 metric 400 if 11 route add 150.251.0.0 mask 255.255.0.0 10.44.2.1 metric 100 if 11 route add 10.0.0.0 mask 255.0.0.0 10.44.2.1 metric 100 if 11 pause

  Read the article

• HP LaserJet 1515: Disable "refill" warning

  - by Pekka

  I have a HP LaserJet 1515 connected to a Windows 7 PC. The Magenta cartridge is empty; the printer shows a warning to that effect, and won't let me print even black-and-white documents any more. I can't turn the warning off manually using the printer's small console: When I try to enter any menu, the display says "Menu access disabled". I have no idea why. There is a setting to override the warning, but it can't be changed using the Network interface in the browser (Although it is there on the status page) According to the manual,the HP printing tool is supposed to offer a switch for this, but it won't install on my Windows 7. It just rumbles about for half an hour, to magnificently exit with an "unknown error" requiring a reboot. On second look, the problem seems to be that Windows 7 just isn't supported. There is no download link for the tool when you specify Windows 7 as your OS. I just want to print a black-and-white-document on a printer whose black cartridge is still 65% full. Is this indeed impossible? On second thought, I'm cross-posting this on the HP support forum. I'll update here if anything comes up.

  Read the article

• No internet through a web browser but Skype still works

  - by kim3er

  We get our office broadband through a BT Business Broadband WiFi router. We have a mixture of macs and windows PC/laptops connecting to it at any one time. All devices are able to connect to the wireless signal with pretty much full signal. However, only two computers (one windows, one os x) are able to consistently connect to the internet. The other three (one windows, two os x), while they can always connect to the wifi, exhibit one of three characteristics. No internet at all. Programs like Skype work, but no internet through a browser. Internet works, but with intermittent lag when switching between different sites. I'm assuming while trying to resolve different addresses. Ignoring point 1 for moment, my gut is telling me DNS. It is an up to 20MB line that usually gets to between 13MB and 15MB downstream. The router is capable of dealing with the amount of wireless devices that we're throwing at it. Has anyone got any suggestions for how I might further diagnose this problem (preferably in OS X)? Rich

  Read the article

• What can cause the system to freeze in a way where even the reset button takes a long time to react?

  - by ThiefMaster

  What can be the reason for system freezes that are so "hard" that even the hardware reset button takes about 3 seconds until it actually resets the system (and then it actually powers down and up again instead of doing a "clean" hard reset like when pressing it during a normally running system). Since it initially happened mainly while playing videos from YouTube I suspected the graphics card - however, I replaced it recently and it did not change it. It still happens from time to time (and sometimes more often, like a few times times in the last few hours). The system is running Windows 7 - but I don't think this matters since I don't think any software, not even the OS, can actually affect the reset button's behaviour. The PC is not overheated and the freezes happen randomly. There is also no malware on the system. The CPU is an Intel Core i7-920 on a Gigabyte EX58-UD5 mainboard. What could be the cause for this problem? Faulty RAM? I did not run a full memtest86 check yet, but I wonder if there is a more likely issue than faulty RAM - checking 12G of ram does take some time after all! There are no entries in the event log - but that's what I expected since the system freezes so hard that I doubt it has time to write anything to any log.

  Read the article

• OSX server setup suggestions

  - by Tom

  I am looking into the possibility to setup an OSX server for my employees, and would like some input on what is the best approach to meet my needs, and perhaps some suggestions if I am moving in the wrong direction. I am thinking of a Mac Mini OSX server, and are not sure if my needs will be met, and what possibilities are out there. I want these capabilities: - Groups/Users managed on server - Shared folders and private folders for users/groups - Access to activated services - Server hosting software for the users (developing tools ++) - Similar to Windows Terminal Server - Virtual desktop environment (both local and over internet/VPN) - Possible to access trough Mac and Windows The reason I am looking at OSX server is that my employees almost only work in OSX environment, and I want to offer the capabilities to logon to the server trough some kind of terminal software, and have full access to their work OSX environment and software on their mac or pc, from anywhere they might be. Instead of having to have multiple setups and need for spending alot of time installing and setting up needed software on every client. This is a small business, where some work on local network, and others from the internet, preferably trough VPN. But a terminal server solution, that are fast and easy to manage would be perfect for our needs. So if anyone have any experience with a similar setup, please let me know what you did, and your experiences with your setup.

  Read the article

• Nvidia 9800GT randomly prevents computer from booting

  - by Blender

  My computer has been running Windows and Linux perfectly fine with my 9800GT for the past year or so, but today it refused to boot. When I press the power button, this is what happens: Power button flashes once. Fans whir. Graphics card makes clicking noise. Computer reboots. Go back to 1. The cycle just keeps going, and I have to yank the cord to make the computer stop. After about 30 attempts at booting it, the computer powers on and everything works. I'm pretty sure that the graphics card isn't malfunctioning, as I've been GPU computing on it for a while now without any hiccups. But the strange thing is, the computer boots perfectly fine in only 5 boots if I remove the card. The computer is a HP Pavilion a6028x Desktop PC: Processor: AMD Athlon 64 X2 (W) 4600+ 2.4 GHz (AM2 socket) Motherboard: ECS MCP61PM-HM (Nettle 1) RAM: 3GB DDR2 (two different brands) More specs here Does anybody know what could be the problem? Any help or information would be greatly appreciated!

  Read the article

< Previous Page | 314 315 316 317 318 319 320 321 322 323 324 325  | Next Page >