Search Results

Search found 11365 results on 455 pages for 'authorization basic'.

Page 319/455 | < Previous Page | 315 316 317 318 319 320 321 322 323 324 325 326  | Next Page >

  • OSB 11g & SAP – Single Channel/Program ID for Multiple IDOCs

    - by Shub Lahiri, A-Team
    Background This note is a supplement to the blog entry, SOA 11g & SAP – Single Channel/Program ID for Multiple IDOCs by Greg Mally. Greg has shown how a single SOA Suite composite can be used with iWay Adapters to receive multiple IDOC types via a single channel in the adapter, corresponding to a single programID on the SAP system. We will try to address the same requirements within the OSB framework here. Project Built - Design Time The basic build of an OSB project with iWay SAP Adapter, as seen in another entry in this blog, consists of working in OSB Design console and Application Explorer. OSB Design Time - Part 1 We will create a placeholder project first in OSB with a proper directory structure, so that we can export the WSDL, XSD and the JCA binding information from Application Explorer directly into this project. Application Explorer - iWay Design Time Tool Receiving IDOCs is classified as an inbound event within Application Explorer. For setting up events, a channel is first defined (e.g. iDoc_Channel) using the same PROGRAMID (RFC destination), as defined within SAP for the OSB server. Next, the same channel is used to export the JCA Inbound Event artifacts for the candidate IDOC, e.g. DEBMAS06 directly to the pre-created OSB project. Note that the validation for schema has been turned off. As a result, this will allow the adapter, at runtime, to use a single channel to receive multiple IDOC types from SAP and pass them on to the OSB runtime engine without any validation. In other words, we do not have to repeat the above step for each IDOC type. OSB Design Time - Part 2 Create 2 simple XML based Business Services to write to a file, e.g.  SAP_DEBMAS_File and SAP_MATMAS_File. Next, generate a Proxy Service using the JCA binding file exported from Application Explorer in the previous section. In the generated proxy service, edit the message flow and add a route node. Add a routing table in the route node with the following routing function. fn:local-name-from-QName(fn:node-name($body/*[1])) This function takes advantage of the fact that the XML payload at runtime, after translation by adapter, has the IDOC type as the top element. With the routing function in place, build the routing table to add 2 branches to route the IDOCs to the appropriate Business Service for writing the XML payload to files in separate directories. This completes the build of the OSB project. Testing - Run-Time After deployment and activation, the SAP adapter will wait to receive multiple types of IDOCs sent from the SAP system using a single channel. Upon receipt of the IDOCs, the OSB project will route them appropriately to save the corresponding XML payloads for different IDOC types in different directories.

    Read the article

  • introducing pointers to a large software project

    - by stefan
    I have a fairly large software project written in c++. In there, there is a class foo which represents a structure (by which i don't mean the programmers struct) in which foo-objects can be part of a foo-object. Here's class foo in simplest form: class Foo { private: std::vector<unsigned int> indices; public: void addFooIndex(unsigned int); unsigned int getFooIndex(unsigned int); }; Every foo-object is currently stored in an object of class bar. class Bar { private: std::vector<Foo> foos; public: void addFoo(Foo); std::vector<Foo> getFoos(); } So if a foo-object should represent a structure with a "inner" foo-object, I currently do Foo foo; Foo innerFoo; foo.addFooIndex(bar.getFoos().size() - 1); bar.addFoo(innerFoo); And to get it, I obviously use: Foo foo; for ( unsigned int i = 0; i < foo.getFooIndices().size(); ++i ) { Foo inner_foo; assert( foo.getFooIndices().at(i) < bar.getFoos().size() ); inner_foo = bar.getFoos().at(foo.getFooIndices().at(i)); } So this is not a problem. It just works. But it's not the most elegant solution. I now want to make the inner foos to be "more connected" with the foo-object. It would be obviously to change class foo to: class Foo { private: std::vector<Foo*> foo_pointers; public: void addFooPointer(Foo*); std::vector<Foo*> getFooPointers(); }; So now, for my question: How to gently change this basic class without messing up the whole code? Is there a "clean way"?

    Read the article

  • Skyrim Creation Kit with Xbox 360

    - by funseiki
    I posted this on stackoverflow but was advised to post here (here is a link to the stackoverflow question). I'm hoping for constructive feedback on its plausibility. Update on progress: It looks like there are ways to stuff files back onto the console (horizon, modio, xplorer360, etc) and they do require some form of signing. As of now, though, I've had no luck. I was hoping I could get away with just placing the ".esp" into the directory containing marketplace downloads for Skyrim, along with the signed ".bsa" file (basically a zipped up file containing any extra content the .esp will need to refer that doesn't exist in the basic game). This doesn't work, at least not in the ways I've tried, so next I'm going to try install the entire game to my flash drive (if possible) and attempt to traverse through the game's directory (this is probably unlikely). If anyone else has suggestions or luck or wants more detail on my failures comment/answer away. Here is the question: I'm thinking about buying the PC version of Skyrim to get the Creation Kit (I already own a copy for the Xbox). I have read the faq and scoured plenty of forums to see if there was some way to mod Skyrim for a console (Xbox 360, in particular), but they are generally coming up negative. I realize the CreationKit is on the PC, but I was wondering if there was a way to set up the '.esp' (hopefully I'm interpreting this correctly) files to be placed on the Xbox 360 file system in a similar manner to how game add-ons are downloaded from the Xbox Live Marketplace. I believe it is possible to transfer saves between the console and the PC (e.g. google: 'skyrim mod xbox360'), but these are referencing items that already exist in the game (e.g. a console command for maximum carry weight does not require reference to new animations or models). It would probably be easier if one could navigate through the xbox's file system to see where the games' files are placed, but with the current setup, the file system is abstracted away. Any help or insight on the matter would be much appreciated. I would love to work on a project that would make it possible to let console gamers experience and enjoy all the great mods available to the PC community.

    Read the article

  • TFS Hosting: discountasp.net TFS

    - by Enrique Lima
    In the last month or so I have been able to test and experience first hand the offering from discountasp.net for hosted TFS 2010. This first part is a description of the setup process for the account itself and getting some additional information on what you will find through the portal on their site. Not long ago, I posted a little tidbit on hosting TFS.  Through it I also did a shameless plug to my employer, our services and the type of hosting we recommend.  So, wouldn’t me running on discountasp.net be an issue?  Actually? NO. Ok, enough rambling.  Let’s get some details here. It is a Software as a Service model.  Through it we get Source Control, Version Control, Work Item Tracking and such.  What about Build?  If your need includes Build Management and such, you may need to look at some other options.  But, still this is a great offering for those that are moving from SourceSafe.  Or organizations who have 3 to 5 developers on staff, and do not foresee getting larger anytime soon.  Can it support more than 5 developers?  Yes, but then we need to get into how are you using TFS.  Do you need more than just Basic?  For example, SharePoint and Reporting Services integration. The signup process was seamless! Very easy to follow, complete and transition to Visual Studio to start working. An email followed the signup process, it contained details on how to get to the Team Foundation Server Control Panel login.  Once there, here is what I saw after the initial setup process of naming my Team Project Collection: So, moving on … once I clicked the area to get my server info, I got the following: Then it was a matter of getting the first user in there: Then on to connecting Visual Studio to my hosted TFS. Getting the server information, and the user account created I will configure those options in Visual Studio. Using Team Explorer, I am adding a new server configuration. Once this is provided, click OK, I will be challenged for a username and password, provide them and you will land on the following screen. Then Click Close. You will now be connected to your server and Team Project Collection. Since this will likely be the first time connecting, you will have no Projects (I already have 2 going). Click Connect, and you will be back in Team Explorer. My next post in the topic will be on Creating your First Team Project and uploading a Project Template to the server.

    Read the article

  • Extracting the Layout of all the Data Forms from the Relational Database

    - by RahulS
    Today I came across a question from one of our clients that: "what members are used on each data form WITHOUT having to go through the report generated out of our Planning app". We worked with client on this and reached to a simple query. All the form related information is stored in the following tables: HSP_FORM HSP_FORMOBJ_DEF HSP_FORMOBJ_DEF_MBR HSP_FORM_ATTRIBUTES HSP_FORM_CALCS HSP_FORM_DV_CONDITION HSP_FORM_DV_PM_RULE HSP_FORM_DV_RULE HSP_FORM_DV_USER_IN_PM_RULE HSP_FORM_LAYOUT HSP_FORM_MENUS HSP_FORM_VARIABLES If we want to retrieve just the members included, we can concentrate on: HSP_OBJECT to get the Object_ID for form, Object_Type is 7 for forms. (Ex: Select * from HSP_OBJECT where OBJECT_TYPE = 7) HSP_FORMOBJ_DEF Find the OBJDEF_ID for a particular form HSP_FORMOBJ_DEF_MBR Use the above OBJDEF_ID to find the members: Here the Mbr_ID is the Id of the member and Query_Type is the Function like Idesc, Level0 etc and Sequce is you sequence, And the final table we can use is HSP_FORM_LAYOUT: Layout_Type: 0->Pov 1-> Page, 2->Row, 3->Col, DIM_ID is the dimension ID and Ordinal is position. Here is the Query: SELECT HSP_OBJECT.OBJECT_NAME AS 'Form',  HSP_OBJECT_2.OBJECT_NAME AS 'Dimension',  HSP_OBJECT_1.OBJECT_NAME AS 'Member',  HSP_FORMOBJ_DEF_MBR.QUERY_TYPE FROM  <DatabaseName>.dbo.HSP_FORM_LAYOUT HSP_FORM_LAYOUT,  <DatabaseName>.dbo.HSP_FORMOBJ_DEF HSP_FORMOBJ_DEF,  <DatabaseName>.dbo.HSP_FORMOBJ_DEF_MBR HSP_FORMOBJ_DEF_MBR,  <DatabaseName>.dbo.HSP_MEMBER HSP_MEMBER,  <DatabaseName>.dbo.HSP_OBJECT HSP_OBJECT,  <DatabaseName>.dbo.HSP_OBJECT HSP_OBJECT_1,  <DatabaseName>.dbo.HSP_OBJECT HSP_OBJECT_2 WHERE  HSP_OBJECT.OBJECT_ID = HSP_FORMOBJ_DEF.FORM_ID AND  HSP_FORMOBJ_DEF_MBR.OBJDEF_ID = HSP_FORMOBJ_DEF.OBJDEF_ID AND  HSP_MEMBER.MEMBER_ID = HSP_FORMOBJ_DEF_MBR.MBR_ID AND  HSP_OBJECT_1.OBJECT_ID = HSP_MEMBER.MEMBER_ID AND  HSP_OBJECT_2.OBJECT_ID = HSP_MEMBER.DIM_ID AND  HSP_FORM_LAYOUT.DIM_ID = HSP_MEMBER.DIM_ID AND  HSP_FORM_LAYOUT.FORM_ID = HSP_FORMOBJ_DEF.FORM_ID AND  ((HSP_OBJECT.OBJECT_TYPE=7)) ORDER BY HSP_OBJECT.OBJECT_NAME  Concentrate on Test1 data form and Actual Layout of it as follows: Corresponding Query_type for few of the functions: 9  for Idesc, 3  for Ancestors, -9 for ILvl0Des, 8  for Desc, 4  for IAncestors Its just a basic idea you can do lot on the basis of this. Cheers..!!! Rahul S. http://www.facebook.com/pages/HyperionPlanning/117320818374228

    Read the article

  • box2d resize bodies arround point

    - by philipp
    I have a compound object, consisting of a b2Body, vector-graphics and a list polygons which describe the b2body's shapes. This object has its own transformation matrix to centralize the storage of transformations. So far everything is working quiet fine, even scaling works, but not if i scale around a point. In the initialization phase of the object it is scaled around a point. This happens in this order: transform the main matrix transform the vector graphics and the polygons recreate the b2Body After this function ran, the shapes and all the graphics are exactly where they should be, BUT: after the first steps of the b2World the graphical stuff moves away from the body. When I ran the debugger I found out that the position of the body is 0/0 the red dot shows the center of scaling. the first image shows the basic setup and the second the final position of the graphics. This distance stays constant for the rest of the simulation. If I set the position via myBody.SetPosition( sx, sy ); the whole scenario just plays a bit more distant for the origin. Any Idea how to fix this? EDIT:: I came deeper down to the problem and it lies in the fact that i must not scale the transform matrix for the b2body shapes around the center, but set the b2body's position back to the point after scaling. But how can I calculate that point? EDIT 2 :: I came ever deeper down to it, even solved it, but this is a slow solution and i hope that there is somebody who understands what formula I need. assuming to have a set polygons relative to an origin as basis shapes for a b2body: scaling the whole object around a certain point is done in the following steps: i scale everything around the center except the polygons i create a clone of the polygons matrix i scale this clone around the point i calculate dx, dy as difference of clone.tx - original.tx and clone.ty - original.ty i scale the original polygon matrix NOT around the point i recreate the body i create the fixture i set the position of the body to dx and dy done! So what i an interested in is a formula for dx and dy without cloning matrices, scaling the clone around a point, getting dx and dy and finally scale the vertex matrix.

    Read the article

  • Will HTML5 make Silverlight redundant?

    - by Laila
    One of the great features of Adobe AIR v2 that was launched this month was its support for some of the 2008 draft of HTML5. The HTML5 specification was started in 2004, but the full spec will probably not be approved by W3C until around 2022. One might have thought that it would take years yet from now to reach the point where any browsers were remotely HTML5-compliant, but enough of HTML5 is published and agreed to make a lot of it possible, and Safari and Adobe have got there thanks to Apple's open-source WebKit. The race for HTML 5 has been fuelled by the demand by Apple and Google for advanced graphics, typography, animations and transitions without having to rely on third party browser plug-ins such as Adobe Flash or Silverlight. There is good reason for this haste: Flash doesn't support touch-devices and has been slow in supporting hardware video decoders such as H.264. There is a strong requirement to do all that Flash can do in an open-standards way. Those with proprietary solutions remain sniffy. In AIR 2, Adobe pointedly disables the HTML5 and tags that allow basic playing of media content, saying that the specification is not final and there is still no standard for the supported formats, and adding that Safari implements a 'disjoint set' of codecs. Microsoft also has little interest in HTML 5 as it has so much invested in Silverlight. Google stands to gain by the Adobe AIR for Android as it will allow a lot of applications to be migrated easily to the platform, so sees Apple's war on Flash as a way of gaining market share. Why do we care? It is because HTML5/CSS3 provides facilities much far beyond HTML4, bring the reality of browser-based applications a lot closer. Probably most generally useful is the advanced typography: Safari and AIR already both support a way of reflowing text in a container across an arbitrary number of columns; Page-specific fonts can also be specified. Then there is 2D drawing, video, transitions, local storage, AJAX navigation and mutable DOM prototypes. HTML5 is likely to provide base functionality that is required but it is too early to be certain that it will render Flash, Silverlight or JavaFX obsolete. In the meantime, Adobe Air provides the best vehicle for developing HTML5/CSS3 applications without a twinge of worry about browser incompatibilities. Cheers, Laila

    Read the article

  • What can I do to make sure my code gets maintained in a developer light environment?

    - by asjohnson
    I am a contract data analyst, so I bounce between jobs every 3-6 months, which I find to be a good fit for me, but it leads to some problems when it comes to coding. I mostly do statistics (I've asked a similar question on cross validated, but the answers there are not relevant here), but I have also found out that the business world loves excel and loves copying and pasting the same thing over and over again even more. This led me to learn how to write VBA scripts and then VB.NET programs to automate as many of these reports as I can. I am certain my programs are not the most elegant, but I put a good bit of effort into making sure they work under as many cases as I can test, I add in exceptions and try to code so the program can handle changes in the files that it processes, but there is a limit, if you remove a huge portion of the data, there is a good chance my program is going to trip up, which I accept will inevitably happen. Usually a pretty minor change in the code fixes the problem and I do try and comment my code and make it readable under the assumption that some other person will have to read it some day. My problem is that I generally get put on teams of folks with essentially no experience with programming (like VBA would be a huge stretch for anyone I work directly with). I am wondering what I should be doing as the person that wrote the code to do my best to keep it maintained. I have two approaches in mind (outlined next), but would be very happy to get any advice. Solution 1: Find the more tech savvy coworkers and run them through the programs and what basic changes can be made. Honestly automating excel is about as easy as it can get when it comes to programming, so I feel like I could teach someone the basics of maintaining it pretty quick. Solution 2: Get in touch with the IT department and show them what is going on and maybe they will be able to help. The problem here is that the IT department is constantly swamped (as I'm sure many of you know) and I feel like kind of a jerk for dumping more things on them. I do leave my personal email address with places and am willing to answer quick questions via email, but I view the need for more exhaustive maintenance as something of an inevitability and would like to make sure I do my due diligence to make sure it gets done. I imagine some combination of the two approaches outlined there, but is there any kind of heads up I should give IT? I feel like I would be annoyed if I started getting requests to fix a program that I had never seen from some random guy that is no longer there.

    Read the article

  • Pro SharePoint 2010 Business Intelligence Solutions

    - by Sahil Malik
    Ad:: SharePoint 2007 Training in .NET 3.5 technologies (more information). Oh yeah baby, it’s out finally! This book is what I wanted to write for so long now, but never really got a chance to. For SharePoint 2007, I authored the SharePoint section of “Smart BI Solutions with SQL Server 2008” for MS Press. But never really got the time, to author a full book that this topic deserved. Until SharePoint 2010, we actually have a full book on this topic. So first things first, I didn’t actually write it. My role was limited to the overall concept, the outline, the layout, completion of it, code samples, identifying what we need in here, vouching for technical accuracy, identifying authors etc. The real work was done by Srini (5 chapters), and Steve (1 chapter). So credit given where it is due. But, with that said, this is a pretty good book. It has always been a challenge to find the superman that knows both, data ware housing concepts, and SharePoint concepts. The data ware housing concepts include basic stuff you need to know to work in the BI area such as cubes, MDX queries, etc. So chapter 1 covers that – and if you’re a hardcore DBA, feel free to skip Chapter 1. Then beyond that, we take every single SharePoint 2010 BI topic, and slice and dice it in detail. The topics we deal with are - Visio Services Reporting services Business Connectivity Services Excel Services PerformancePoint Services And in covering each of these topics, we ensure that a general layout was followed for each topic, to ensure completeness of content. We make sure we cover Setup related issues and advice Point and click usage Code usage, i.e. extensibility using visual studio and a walkthrough of the administration side of things, including powershell. (Yes, I insisted on that in being there in every chapter). Writing a book is always a lot of work, so we hope you find it useful. And it should go very well with the other book I just reviewed, which is Microsoft ADO.NET 4, step by step. Comment on the article ....

    Read the article

  • Visual Studio 2010 Launch Events

    - by Jim Duffy
    Don’t miss out on the opportunity to learn about the new features in Visual Studio 2010. Check out the MSDN Events page and find out when the talented folks of the Developer & Evangelism group will be visiting your city to prove to you that /*Life Runs On Code*/. I’ll be attending the Raleigh event June 2, 2010 from 1:00 - 5:00 PM. North Carolina State University, Jane S. McKimmon Conference Center 1101 Gorman St Raleigh North Carolina 27606 United States From the Raleigh Event page: Event Overview Learn about the rich application platforms that Microsoft® Visual Studio® 2010 supports, including Windows® 7, the Web, SharePoint®, Windows Azure™, SQL®, and Windows® Phone 7 Series. From tighter tester and dev collaboration to new ALM tools, there’s a lot that’s new. Here’s what you can expect: Windows Development with Visual Studio 2010 Visual Studio has always been the best way to build compelling visual solutions for Windows. Visual Studio 2010 continues this trend with great new tooling support for Silverlight 4, WPF, and native development. In this demo heavy session, you’ll see how you can build rich Windows applications with Silverlight 4 using new trusted application features including out-of-browser execution, saving to the file system, and even COM Automation. You’ll also see how you can use the new Task Parallel Library from within a WPF application to take advantage of all those cores in today’s modern computers. Web and Cloud Development with Visual Studio 2010 If you build solutions for the web, then this session is for you. Come see how your existing skills move forward with Visual Studio 2010 both for in-house ASP.NET development and the new frontier of the Cloud. In this session, you’ll see improved designers, new HTML and JavaScript snippets, Web Forms enhancements, and how you can quickly build great web sites using Dynamic Data. You’ll see the changes made to testable web sites with MVC 2.0 and how we’ve integrated JQuery support into the platform. You’ll then see how easy it is to leverage your existing code and move to the cloud with Windows Azure. Windows Phone 7 Developer Tools and Platform Overview This session provides an overview of Visual Studio® 2010 for Windows Phone. Learn about the powerful capabilities of this new application platform and the developer tools experience including basic IDE usage, debugging, packaging, and deployment. This session also shows how you can use Microsoft Expression® Blend™ for Windows Phone to build great Silverlight applications. Have a day. :-|

    Read the article

  • Tell me a Story

    - by Geoff N. Hiten
    I recently had a friend ask me to review his resume.  He is a very experienced DBA with excellent skills.  If I had an opening I would have hired him myself.  But not because of the resume.  I know his skill set and skill levels, but there is no way his standard resume can convey that.  A bare bones list of job titles and skills does not set you apart from your competition, nor does it convey whether you have junior or senior level skills and experience.  The solution is to not use the standard format. Tell me a story.  I want to know what you were responsible for.  Describe a tough project and how you saved time/money/personnel on that project.  Link your work activity to business value.  Drop some technical bits in there since we do work in a technical field, but show me what you can do to add value to my business well above what I would pay you.  That will get my attention. The resume exists for one primary and one secondary reason.  The primary reason is to get the interview.  A Resume won’t get you a job, so don’t expect it to.  The secondary reason is to give you and the interviewer a starting point for conversations.  If I can say “Tell me more about when….” and reference an item from your resume, then that is great for both of us.  Of course, you better be able to tell me more, both from the technical and the business side, at least if I am hiring a senior or higher level position.  As for the junior DBAs, go ahead and tell your story too.  Don’t worry about how simple or basic your projects or solutions seem.  It is how you solved the problem and what you learned that I am looking for.  If you learn rapidly and think like a DBA, I can work with that, regardless of you current skill level.

    Read the article

  • Investing in Servers by Intel

    - by Koushal Deshpande
    Originally posted on: http://geekswithblogs.net/BizTalkAndOtherTechs/archive/2013/10/31/investing-in-servers-by-intel.aspxA nice article reference from Intel, refer here. Referees to cloud as well. Choose correctly what you need. 1 Do determine right server for your company. There is no use getting a server that has redundant services but still add to the costs. 2 Do get servers that can be upgraded. A server with limited memory and storage may not be able to keep up with your business growth. The basic memory and storage options might not be sufficient. Consider at least 8GB of RAM and 1 terabyte of hard disk space. 3 Do check the server has at least one Gigabit Ethernet port. This allows high speed transferring of files and increases productivity for your employees. USB and Firewire ports may not be enough as their transfer speed is too low and will affect the productivity of your company. Infinite Technologies is ready to help perform this upgrade. Contact Infinite Technologies now View our other resellers » 4 Do verify that the server comes with documentation. Documentation allows you to make a claim when your server breaks down and is supported by a warranty. 6 Do check the support options for the server from the manufacturer. Different manufacturer has different support options such as maintenance plans and software upgrades. 5 Do always look into the warranty. Get an enhanced warranty that guarantees response and repair time to avoid disruption. 7 Do get server management tools that can be used on any computer. Server management tools should be cross compatible across different operating systems to take into account future PC replacements. 8 Do check the power usage of the servers. Get the right power supply to avoid damaging server hardware and consider the Intel® Xeon® E3 processor to help save on your electricity bills. 9 Do check what built-in security packages are available. Ensure that your server is protected. Built-in security1 helps you save on getting add on security packages.

    Read the article

  • What is required for a scope in an injection framework?

    - by johncarl
    Working with libraries like Seam, Guice and Spring I have become accustomed to dealing with variables within a scope. These libraries give you a handful of scopes and allow you to define your own. This is a very handy pattern for dealing with variable lifecycles and dependency injection. I have been trying to identify where scoping is the proper solution, or where another solution is more appropriate (context variable, singleton, etc). I have found that if the scope lifecycle is not well defined it is very difficult and often failure prone to manage injections in this way. I have searched on this topic but have found little discussion on the pattern. Is there some good articles discussing where to use scoping and what are required/suggested prerequisites for scoping? I interested in both reference discussion or your view on what is required or suggested for a proper scope implementation. Keep in mind that I am referring to scoping as a general idea, this includes things like globally scoped singletons, request or session scoped web variable, conversation scopes, and others. Edit: Some simple background on custom scopes: Google Guice custom scope Some definitions relevant to above: “scoping” - A set of requirements that define what objects get injected at what time. A simple example of this is Thread scope, based on a ThreadLocal. This scope would inject a variable based on what thread instantiated the class. Here's an example of this: “context variable” - A repository passed from one object to another holding relevant variables. Much like scoping this is a more brute force way of accessing variables based on the calling code. Example: methodOne(Context context){ methodTwo(context); } methodTwo(Context context){ ... //same context as method one, if called from method one } “globally scoped singleton” - Following the singleton pattern, there is one object per application instance. This applies to scopes because there is a basic lifecycle to this object: there is only one of these objects instantiated. Here's an example of a JSR330 Singleton scoped object: @Singleton public void SingletonExample{ ... } usage: public class One { @Inject SingeltonExample example1; } public class Two { @Inject SingeltonExample example2; } After instantiation: one.example1 == two.example2 //true;

    Read the article

  • Avoiding Duplicate Content Penalties on a Corporate/Franchise website

    - by heath
    My question is really an extension of a previous question that was ported from stackoverflow and closed so I cannot edit it. The basic gist is a regional franchise company has decided to force all independent stores into one website look; they currently all have their own domains and completely different websites. After reading the helpful answers and looking over some links provided, I think my solution is to put a 301 on each franchise store site (acme-store1.com, acme-store2.com, etc) back to the main corporate site (acme.com). All of the company history, product info, etc (about 90% of the entire site) applies to all stores. However, each store should have some exclusive content such as staff, location pictures, exclusive events and promotions, etc. I originally thought that I would simply do something like acme.com/store1/staff, acme.com/store2/staff, etc for the store exclusive content and then acme.com/our-company, for example, would cover all stores. However, I now see two issues that I don't know how to solve. They want to see site stats based on what store site they came from. If a user comes from acme-store1.com, is redirected to acme.com and hits several pages, don't I need to somehow keep that original site in the new url to track each page in that user's session and show they originally came from acme-store1.com? Each store is still independently owned and is essentially still in competition with the other stores, albeit, in less competition than they are with other brands. This is important because each store would like THEIR contact info, links to their social media pages, their mailing list sign-up and customer requests on EVERY page. So if a user originally goes to acme-store1.com and is redirected to acme.com, it still should look to the user that it's all about store 1, even though 90% of the content will be exactly the same as it is in the store 2, store 3 and corporate site. For example, acme.com/our-company would have the same company history, same header/footer/navigation, BUT depending on the original site the user came from, it would display contact and links to THAT store. If someone came directly to the corporate site, it would display their contact and links (they have their own as well). I was considering that all redirects would be to store1.acme.com, store2.acme.com, etc (or acme.com/store1) and then I can dynamically add the contact info and appropriate links based on the subdomain or subfolder. But, then I have to worry about duplicate content penalties because, again, about 90% of the text in these "subdomains" are all the same. For reference, this is a PHP5 site. I've already written a compact framework utilizing templates and mod-rewrite that I've used for other sites. Is this an easy fix that I'm just not grasping? Any suggestions?

    Read the article

  • How Microsoft Market DotNet?

    - by Fendy
    I just read an Joel's article about Microsoft's breaking change (non-backwards compatibility) with dot net's introduction. It is interesting and explicitly reflected the condition during that time. But now almost 10 years has passed. The breaking change It is mainly on how bad is Microsoft introducing non-backwards compatibility development tools, such as dot net, instead of improving the already-widely used asp classic or VB6. As much have known, dot net is not natively embedded in windows XP (yes in vista or 7), so in order to use the .net apps, you need to install the .net framework of over 300mb (it's big that day). However, as we see that nowadays many business use .net as their main development tools, with asp.net or mvc as their web-based applications. C# nowadays be one of tops programming languages (the most questions in stackoverflow). The more interesing part is, win32api still alive even there is newer technology out there (and still widely used). Imagine if microsoft does not introduce the breaking change, there will many corporates still uses asp classic or vb-based applications (there still is, but not that much). There are many corporates use additional services such as azure or sharepoint (beside how expensive is it). Please note that I also know there are many flagships applications (maybe adobe's and blizzard's) still use C-based or older language and not porting to newer high-level language. The question How can Microsoft persuade the users to migrate their old applications into dot net? As we have known it is very hard and give no immediate value when rewrite the applications (netscape story), and it is very risky. I am more interested in Microsoft's way and not opinion such as "because dot net is OOP, or dot net is dll-embedable, etc". This question may be constructive, as the technology is vastly changes over times lately. As we can see, Microsoft changes Asp.Net webform to MVC, winform is legacy now, it is starting to change to use windows store rather than basic-installment, touchscreen and later on we will have see-through applications such as google class. And that will be breaking changes. We will need to account portability as an issue nowadays. We will need other than just mere technology choice, but also migration plans. Even maybe as critical as we might need multiplatform language compiler, as approached by Joel's Wasabi. (hey, I read his articles too much!)

    Read the article

  • Perl syntax error [closed]

    - by Linny
    I am a beginner taking a Perl programming course. We are trying to write a basic program for counting nucleotides in a DNA string. I'm getting syntax errors on the lines that have a single bracket on lines 28 & 70 and don't know why. It also reads that I have compilation errors. I have no idea where to start figuring that out. # The purpose of this program is to count the number of nucleotides in a strand. Each protein is counted separately # print "/n NOTE: Nucleotide counting /n"; # use strict; # enforce variable declarations use warnings; # enable compiler warnings # Display number of A,a,T,t,G,g,C,c, nucleotides in a word or sequence of letters. # my ($base) = ''; # an extracted letter from a string my ($nuceotide_count) = 0 ; # the current position within the word my ($position) = 0 ; # number of vowels in user-supplied word my ($word) = ''; # word to be processed my ($A_count) = 0 ; # of A nucleotides in the user-supplied sequence my ($a_count) = 0 ; # of A nucleotides in the user-supplied sequence my ($C_count) = 0 ; # of C nucleotides in the user-supplied sequence my ($c_count) = 0 ; # of C nucleotides in the user-supplied sequence my ($G_count) = 0 ; # of G nucleotides in the user-supplied sequence my ($g_count) = 0 ; # of G nucleotides in the user-supplied sequence my ($T_count) = 0 ; # of T nucleotides in the user-supplied sequence my ($t_count) = 0 ; # of T nucleotides in the user-supplied sequence word = (STDIN) for ($position = 0);($position if (($base eq 'a') or ($base eq 'A')) { ++$A_count; } # end if ++$position; if (($base eq 'T') or ($base eq 't')) { ++$T_count; } end if ++$position; if (($base eq 'G') or ($base eq 'g')) { ++$G_count; } # end if ++$position; if (($base eq 'C') or ($base eq 'c')) { ++$C_count; } # end if ++$position; } # end for # Display final results. # print " \n The number of A or a neucleotides is: $A_count"; print " \n The number of T or t neucleotides is: $T_count"; print " \n The number of G or g neucleotides is: $G_count"; print " \n The number of C or c neucleotides is: $C_count"; print " \n\n Program completed successfully. \n" ; exit ;

    Read the article

  • SharePoint 2010 Hosting :: How to Enable Office Web Apps on SharePoint 2010

    - by mbridge
    Office Web App is the online version of Microsoft Office 2010 which is very helpful if you are going to use SharePoint 2010 in your organization as it allows you to do basic editing of word document without installing the Office Suite in the client machine. Prerequisites : - Microsoft Server 2008 R2 - Microsoft SharePoint Server 2010 or Microsoft SharePoint Foundation 2010 - Microsoft Office Web Apps. If you have installed all the above products, just follow this steps: 1. Go to Central Administration > Click on Manage Service Application. 2. All the menus are not displayed in ribbon Menu format which was first introduced in Office 2007. Click on New > Word Viewing Services ( You can choose PowerPoint or Excel also, steps are same ). This will open a pop window. Adding Services for Office Web Apps 3. Give a Proper Name which can have your companies or project name. 4. Under Application Pool select : SharePoint Web Services Default. 5. Next keep the check box checked which says : Add this service application’s proxy to the farm’s default proxy list. Click Ok Adding Word Viewer as Service Application Office Web Apps as Services in Sharepoint 2010 6. This will install all the Office Web App services required. You can see the name as you gave in the above step. How to Activate Office Web Apps in Site Collection? 1. Go to the site for which you want to activate this feature. 2. Click on Site Action > Site Settings > Site Collection Administrator > Site Collection Features 3. Activate Office Web Apps. Activate Office Web Apps Feature in Site Collection How to make sure Office Web Apps is working for your site collection? 1. Locate any office document you have and click on the smart menu which appears when you hover your mouse on it. Dont double-click as this will launch the document in Office Client if its installed. This feature can be changed. 2. If you see View or Edit in Browser as menu item, your Office Web Apps is configured correctly. View Edit Office Document in Browser Editing Office Document in Browser Another post related SharePoint 2010: 1. How to Configure SharePoint Foundation 2010 for SharePoint Workspace 2010 2. Integrating SharePoint 2010 and SQL 2008 R2

    Read the article

  • Webcast Q&A: Qualcomm Provides a Seamless Experience for Customers with Oracle WebCenter

    - by kellsey.ruppel
    Last Thursday we had the second webcast in our WebCenter in Action webcast series, "Qualcomm Provides a Seamless Experience for Customers with Oracle WebCenter, where customer Michael Chander from Qualcomm and Vince Casarez & Gourav Goyal from Oracle Partner Keste shared how Oracle WebCenter is powering Qualcomm’s externally facing website and providing a seamless experience for their customers. In case you missed it, here's a recap of the Q&A.   Mike Chandler, Qualcomm Q: Did you run into any issues when integrating all of the different applications together?A: Definitely, our main challenges were in the area of user provisioning and security propagation, all the standard stuff you might expect when hooking up SSO for authentication and authorization. In addition, we spent several iterations getting the UI’s in sync. While everyone was given the same digital material to build too, each team interpreted and implemented it their own way. Initially as a user navigated, if you were looking for it, you could slight variations in color or font or width , stuff like that. So we had to pull all the developers responsible for the UI together and get pixel level agreement on a lot of things so we could ensure seamless transitions across applications. Q: What has been the biggest benefit your end users have seen?A: Wow, there have been several. An SSO enabled environment was huge a win for our users. The portal application that this replaced had not really been invested in by the business. With this project, we had full business participation and backing, and it really showed in some key areas like the shopping experience. For example, while ordering in the previous site, the items did not have any pictures or really usable descriptions. A tremendous amount of work was done to try and make the site more intuitive and user friendly. Site performance has also drastically improved thanks to new hardware, improved database design, and of course the fact that ADF has made great strides in runtime performance. Q: Was there any resistance internally when implementing the solution? If so, how did you overcome that?A: Within a large company, I’m sure there is always going to be competition for large projects, as there was here. Once we got through the technical analysis and settled on the technology choices, it was actually no resistance to implementing the solution. This project was fully driven by the business with the aim of long term growth. I can confidently say that the fact that this project was given the utmost importance by both the business and IT really help put down any resistance that you would typically see while implementing a new solution. Q: Given the performance, what do you estimate to be the top end capacity of the system? A:I think our top end capacity is really only limited by our hardware. I’m comfortable saying we could grow 10x on our current hardware, both in terms of transactions and users. We can easily spin up new JVM instances if needed. We already use less JVM’s than we had planned. In addition, ADF is doing a very good job with his connection pooling and application module pooling, so we see a very good ratio of users connected to the systems vs db connections, without impacting performace. Q: What's the overview or summary of feedback from the users interacting with the site?A: Feedback has been overwhelmingly positive from both the business and our customers. They’re very happy with the new SSO environment , the new LAF, and the performance of the site. Of course, it’s not all roses. No matter what, there are always going to be people that don’t like the layout or the color scheme, etc. By and large though, customers are happy and the business is happy. Q: Can you describe the impressions about the site before and after the project within Qualcomm?A: Before the project, the site worked and people were using it, but most people were not happy with it. It was slow and tended to be a bit tempermental, for example a user would perform a transaction and the system would throw and unexpected error. The user could back up and retry the steps and things would work fine, so why didn’t work the first time?. From a UI perspective, we’d hear comments like it looked like it was built by a high school student.  Vince Casarez & Gourav Goyal, Keste Q: Did you run into any obstacles when implementing the solution?A: It's interesting some people call them "obstacles" on this project we just called them "dependencies".  There were both technical and business related dependencies that we had to work out. Mike points out the SSO dependencies and the coordination and synchronization between the teams to have a seamless login experience and a seamless end user experience.  There was also a set of dependencies on the User Acceptance testing to make sure that everyone understood the use cases for how the system would be used.  With a branching into a new market and trying to match a simple user experience as many consumer sites have today, there was always a tendency for the team members to provide their suggestions on how things could be simpler.  But with all the work up front on the user design and getting the business driving this set of experiences, this minimized the downstream suggestions that tend to distract a team.  In this case, all the work up front allowed us to enumerate the "dependencies" and keep the distractions to a minimum. Q: Was there a lot of custom work that needed to be done for this particular solution?A: The focus for this particular solution was really on the custom processes. The interesting thing is that with the data flows and the integration with applications, there are some pre-built integrations, but realistically for the process flow, we had to build those. The framework and tooling we used made things easier so we didn’t have to implement core functionality, like transitioning from screen to screen or from flow to flow. The design feature of Task Flows really helped speed the development and keep the component infrastructure in line with the dynamic processes.  Task flows and other elements like Skins are core to the infrastructure or technology stack of Oracle. This then allowed the team to center the project focus around the business flows and use cases to meet the core requirements and keep the project on time. Q: What do you think were the keys to success for rolling out WebCenter?A:  The 5 main keys to success were: 1) Sponsorship from the whole organization around this project from senior executive agreement, business owners driving functionality, and IT development alignment; 2) Upfront design planning and use case definition to clearly define the project scope and requirements; 3) Focussed development and project management aligned with the top level goals and drivers; 4) User acceptance and usability testing along the way to identify potential issues and direct resolution of the issues;  and 5) Constant prioritization of the issues for development to fix by the business.  It also helps to have great team chemistry and really smart people working on the project. If you missed the webcast, be sure to catch the replay to see a live demonstration of WebCenter in action!  Qualcomm Provides a Seamless Experience for Customers with Oracle WebCenter from Oracle WebCenter

    Read the article

  • #SSAS #Tabular Workshop and Community Events in Netherlands and Denmark

    - by Marco Russo (SQLBI)
    Next week I will finally start the roadshow of the SSAS Tabular Workshop, a 2-day seminar about the new BISM Tabular model for Analysis Services that has been introduced in SQL Server 2012. During these roadshows, we always try to arrange some speeches at local community events in the evening - we already defined for Copenhagen, we have some logistic issue in Amsterdam that we're trying to solve. Here is the timetable: Netherlands SSAS Workshop in Amsterdam, NL – April 16-17, 2012 2-day seminar, I and Alberto will be the trainers for this event, register here We're trying to manage a Community event but we still don't have a confirmation, stay tuned        Denmark SSAS Workshop in Copenhagen, DK – April 26-27, 2012 2-day seminar, I and Alberto will be the trainers for this event, register here Community event on April 26, 2012 This event will run in Hellerup, at Microsoft venue All details available here: http://msbip.dk/events/26/msbip-mode-nr-5/ People from Sweden are welcome! Just register to this private group on LinkedIn in order to announce your presence, so we’ll know how many people will attend In community events we’ll deliver two speeches – here are the descriptions: Inside xVelocity (VertiPaq) PowerPivot and BISM Tabular models in Analysis Services share a great columnar-based database engine called xVelocity in-memory analytics engine (VertiPaq). If you want to improve performance and optimize memory used, you have to understand some basic principles about how this engine works, how data is compressed, and how you can design a data model for better optimization. Prepare yourself to change your mind. xVelocity optimization techniques might seem counterintuitive and are absolutely different than OLAP and SQL ones! Choosing between Tabular and Multidimensional You have a new project and you have to make an important decision upfront. Should you use Tabular or Multidimensional? It is not easy to answer, because sometime there is a clear choice, but most of the times both decisions might be correct, at least at the beginning. In this session we’ll help you making an informed decision, correctly evaluating pros and cons of each one according to common scenarios, considering both short-term and long-term consequences of your choice. I hope to meet many people in this first dates. We have many other events coming in May and June, including an online event (for US time zones), and you can also attend our PreCon Day at TechEd US in Orland (PRC06) or TechEd Europe in Amsterdam. I’ll be a good customer for airline companies in the next three months! I’m just sorry that I hadn’t time to write other articles in the last month, but I’m accumulating material that I will need to write down during some flight – stay tuned…

    Read the article

  • Ubuntu Server and setting up two nic cards

    - by kmalik
    I have ubuntu server on a computer with a wireless and hardwired nic card. The wireless needs to get the internet and pass it to the ubuntu server as well as pass it along to the hardwired nic card to more computers. I am having issues getting the basic set up as I believe the route table is grabbing from the wrong nic card. The router is 192.168.1.0 and the server is set to 192.168.1.11 on the wireless card through DHCP ETH0 (wired nic card) is set up to be 10.10.10.0 and the server is 10.10.10.1) I am not a linux or networking guru but basically I am trying to have internet come from a guest network 192.168.1.0 i believe to give internet to the ubuntu server then the ubuntu server will also A) have the wired nic serve DHCP addresses to other computers via a switch or router (that acts as a switch) via 10.10.10.0 addresses. And I would love if it also passed along internet capabilities as well if possible. Bu really at this point my hope is to at least get the internet working on the server and the DHCP to pass correctly. At the moment the specific issue I am having is getting ubuntu server to connect to the internet and have both nic cards up and running correctly. Any help would be appreciated! The route table is as follows: Destination Gateway GM Flags Metric Iface 0.0.0.0 10.10.10.1 0.0.0.0 UG 100 eth0 10.10.10.0 0.0.0.0 255.255.255.0 U 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 eth0 1992.168.1.0 0.0.0.0 255.255.255.255.0 U 0 eth1 My interfaces is set up as follows: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 10.10.10.1 netmask 255.255.255.0 network 10.10.10.0 broadcast 10.10.10.255 gateway 10.10.10.1 domain-name-servers 192.168.1.0 auto eth1 iface eth1 inet dhcp netmask 255.255.255.0 gateway 192.168.1.0 wpa-driver wext wpa-ssid "ssid_name" wpa-ap-scan 1 wpa-proto wpa wpa-pairwise ccmp wpa-group ccmp wpa-key-mgmt wpa-psk wpa-psk "HASH" My DHCPD.conf (as there is a domain name server on here is as follows): ddns-update-style none default-lease-time 600 max-lease-time 7200 authoritative option domain-name "Kamron's Network" option subnet-mask 255.255.255.0 option broadcast-address 10.10.10.255 option routers 192.168.1.0 option domain-name-server 192.168.1.0 98.223.128.213 ooption subnet 10.10.10.0 netmask 255.255.255.0 { range 10.10.10.10 10.10.10.99 } log-facility local7

    Read the article

  • How to detect which edges of a rectange touch when they collide in iOS

    - by Mike King
    I'm creating a basic "game" in iOS 4.1. The premise is simple, there is a green rectangle ("disk") that moves/bounces around the screen, and red rectangle ("bump") that is stationary. The user can move the red "bump" by touching another coordinate on the screen, but that's irrelevant to this question. Each rectangle is a UIImageView (I will replace them with some kind of image/icon once I get the mechanics down). I've gotten as far as detecting when the rectangles collide, and I'm able to reverse the direction of the green "disk" on the Y axis if they do. This works well when the green "disk" approaches the red "bump" from top or bottom, it bounces off in the other direction. But when it approaches from the side, the bounce is incorrect; I need to reverse the X direction instead. Here's the timer I setup: - (void)viewDidLoad { xSpeed = 3; ySpeed = -3; gameTimer = [NSTimer scheduledTimerWithTimeInterval:0.05 target:self selector:@selector(mainGameLoop:) userInfo:nil repeats:YES]; [super viewDidLoad]; } Here's the main game loop: - (void) mainGameLoop:(NSTimer *)theTimer { disk.center = CGPointMake(disk.center.x + xSpeed, disk.center.y + ySpeed); // make sure the disk does not travel off the edges of the screen // magic number values based on size of disk's frame // startAnimating causes the image to "pulse" if (disk.center.x < 55 || disk.center.x > 265) { xSpeed = xSpeed * -1; [disk startAnimating]; } if (disk.center.y < 55 || disk.center.y > 360) { ySpeed = ySpeed * -1; [disk startAnimating]; } // check to see if the disk collides with the bump if (CGRectIntersectsRect(disk.frame, bump.frame)) { NSLog(@"Collision detected..."); if (! [disk isAnimating]) { ySpeed = ySpeed * -1; [disk startAnimating]; } } } So my question is: how can I detect whether I need to flip the X speed or the Y speed? ie: how can I calculate which edge of the bump was collided with?

    Read the article

  • Have you used the ExecutionValue and ExecValueVariable properties?

    The ExecutionValue execution value property and it’s friend ExecValueVariable are a much undervalued feature of SSIS, and many people I talk to are not even aware of their existence, so I thought I’d try and raise their profile a bit. The ExecutionValue property is defined on the base object Task, so all tasks have it available, but it is up to the task developer to do something useful with it. The basic idea behind it is that it allows the task to return something useful and interesting about what it has performed, in addition to the standard success or failure result. The best example perhaps is the Execute SQL Task which uses the ExecutionValue property to return the number of rows affected by the SQL statement(s). This is a very useful feature, something people often want to capture into a variable, and start using the result set options to do. Unfortunately we cannot read the value of a task property at runtime from within a SSIS package, so the ExecutionValue property on its own is a bit of a let down, but enter the ExecValueVariable and we have the perfect marriage. The ExecValueVariable is another property exposed through the task (TaskHost), which lets us select a SSIS package variable. What happens now is that when the task sets the ExecutionValue, the interesting value is copied into the variable we set on the ExecValueVariable property, and a variable is something we can access and do something with. So put simply if the ExecutionValue property value is of interest, make sure you create yourself a package variable and set the name as the ExecValueVariable. Have  look at the 3 step guide below: 1 Configure your task as normal, for example the Execute SQL Task, which here calls a stored procedure to do some updates. 2 Create variable of a suitable type to match the ExecutionValue, an integer is used to match the result we want to capture, the number of rows. 3 Set the ExecValueVariable for the task, just select the variable we created in step 2. You need to do this in Properties grid for the task (Short-cut key, select the task and press F4) Now when we execute the sample task above, our variable UpdateQueueRowCount will get the number of rows we updated in our Execute SQL Task. I’ve tried to collate a list of tasks that return something useful via the ExecutionValue and ExecValueVariable mechanism, but the documentation isn’t always great. Task ExecutionValue Description Execute SQL Task Returns the number of rows affected by the SQL statement or statements. File System Task Returns the number of successful operations performed by the task. File Watcher Task Returns the full path of the file found Transfer Error Messages Task Returns the number of error messages that have been transferred Transfer Jobs Task Returns the number of jobs that are transferred Transfer Logins Task Returns the number of logins transferred Transfer Master Stored Procedures Task Returns the number of stored procedures transferred Transfer SQL Server Objects Task Returns the number of objects transferred WMI Data Reader Task Returns an object that contains the results of the task. Not exactly clear, but I assume it depends on the WMI query used.

    Read the article

  • In an Entity-Component-System Engine, How do I deal with groups of dependent entities?

    - by John Daniels
    After going over a few game design patterns, I have settle with Entity-Component-System (ES System) for my game engine. I've reading articles (mainly T=Machine) and review some source code and I think I got enough to get started. There is just one basic idea I am struggling with. How do I deal with groups of entities that are dependent on each other? Let me use an example: Assume I am making a standard overhead shooter (think Jamestown) and I want to construct a "boss entity" with multiple distinct but connected parts. The break down might look like something like this: Ship body: Movement, Rendering Cannon: Position (locked relative to the Ship body), Tracking\Fire at hero, Taking Damage until disabled Core: Position (locked relative to the Ship body), Tracking\Fire at hero, Taking Damage until disabled, Disabling (er...destroying) all other entities in the ship group My goal would be something that would be identified (and manipulated) as a distinct game element without having to rewrite subsystem form the ground up every time I want to build a new aggregate Element. How do I implement this kind of design in ES System? Do I implement some kind of parent-child entity relationship (entities can have children)? This seems to contradict the methodology that Entities are just empty container and makes it feel more OOP. Do I implement them as separate entities, with some kind of connecting Component (BossComponent) and related system (BossSubSystem)? I can't help but think that this will be hard to implement since how components communicate seem to be a big bear trap. Do I implement them as one Entity, with a collection of components (ShipComponent, CannonComponents, CoreComponent)? This one seems to veer way of the ES System intent (components here seem too much like heavy weight entities), but I'm know to this so I figured I would put that out there. Do I implement them as something else I have mentioned? I know that this can be implemented very easily in OOP, but my choosing ES over OOP is one that I will stick with. If I need to break with pure ES theory to implement this design I will (not like I haven't had to compromise pure design before), but I would prefer to do that for performance reason rather than start with bad design. For extra credit, think of the same design but, each of the "boss entities" were actually connected to a larger "BigBoss entity" made of a main body, main core and 3 "Boss Entities". This would let me see a solution for at least 3 dimensions (grandparent-parent-child)...which should be more than enough for me. Links to articles or example code would be appreciated. Thanks for your time.

    Read the article

  • Subterranean IL: Exception handling 1

    - by Simon Cooper
    Today, I'll be starting a look at the Structured Exception Handling mechanism within the CLR. Exception handling is quite a complicated business, and, as a result, the rules governing exception handling clauses in IL are quite strict; you need to be careful when writing exception clauses in IL. Exception handlers Exception handlers are specified using a .try clause within a method definition. .try <TryStartLabel> to <TryEndLabel> <HandlerType> handler <HandlerStartLabel> to <HandlerEndLabel> As an example, a basic try/catch block would be specified like so: TryBlockStart: // ... leave.s CatchBlockEndTryBlockEnd:CatchBlockStart: // at the start of a catch block, the exception thrown is on the stack callvirt instance string [mscorlib]System.Object::ToString() call void [mscorlib]System.Console::WriteLine(string) leave.s CatchBlockEnd CatchBlockEnd: // method code continues... .try TryBlockStart to TryBlockEnd catch [mscorlib]System.Exception handler CatchBlockStart to CatchBlockEnd There are four different types of handler that can be specified: catch <TypeToken> This is the standard exception catch clause; you specify the object type that you want to catch (for example, [mscorlib]System.ArgumentException). Any object can be thrown as an exception, although Microsoft recommend that only classes derived from System.Exception are thrown as exceptions. filter <FilterLabel> A filter block allows you to provide custom logic to determine if a handler block should be run. This functionality is exposed in VB, but not in C#. finally A finally block executes when the try block exits, regardless of whether an exception was thrown or not. fault This is similar to a finally block, but a fault block executes only if an exception was thrown. This is not exposed in VB or C#. You can specify multiple catch or filter handling blocks in each .try, but fault and finally handlers must have their own .try clause. We'll look into why this is in later posts. Scoped exception handlers The .try syntax is quite tricky to use; it requires multiple labels, and you've got to be careful to keep separate the different exception handling sections. However, starting from .NET 2, IL allows you to use scope blocks to specify exception handlers instead. Using this syntax, the example above can be written like so: .try { // ... leave.s EndSEH}catch [mscorlib]System.Exception { callvirt instance string [mscorlib]System.Object::ToString() call void [mscorlib]System.Console::WriteLine(string) leave.s EndSEH}EndSEH:// method code continues... As you can see, this is much easier to write (and read!) than a stand-alone .try clause. Next time, I'll be looking at some of the restrictions imposed by SEH on control flow, and how the C# compiler generated exception handling clauses.

    Read the article

  • Oracle GoldenGate: Knowledge Document Series Post #2

    - by Doug Reid
    0 false 18 pt 18 pt 0 0 false false false /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:12.0pt; font-family:"Times New Roman"; mso-ascii-font-family:Cambria; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Cambria; mso-hansi-theme-font:minor-latin;} 0 false 18 pt 18 pt 0 0 false false false /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:12.0pt; font-family:"Times New Roman"; mso-ascii-font-family:Cambria; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Cambria; mso-hansi-theme-font:minor-latin;} For our second post in this series the team would like to highlight the knowledge document “How-To: Oracle GoldenGate – Heartbeat Process to Monitor Lag and Performance”. This knowledge document outlines a procedure to reliably measure lag between source and target systems through the use of 'heartbeat' tables. The basic idea is to have a table on the source system that gets updated at a predetermined interval. In your capture processes you would capture the update from the heartbeat table. Using tokens you would add some additional information to the heartbeat record to be able to tell which extract process was capturing the update. This additional information would be used downstream to calculate the real lag time between the source and target systems for a given extract and by checking the last update time on the heartbeat at the target you could also determine if data has stopped flowing between the source and target.  Click here to view the document

    Read the article

< Previous Page | 315 316 317 318 319 320 321 322 323 324 325 326  | Next Page >