Search Results

Search found 2702 results on 109 pages for 'dell xps'.

Page 32/109 | < Previous Page | 28 29 30 31 32 33 34 35 36 37 38 39  | Next Page >

• Replacing an ATA-100 hard drive

  - by Pieter

  I was instructed to replace the hard drive in an old laptop, a Dell Latitude D505. I'm suspecting that there was a head crash when someone moved the laptop while it was turned on. In the specifications, I found this about the hard drive: 30GB ATA-100; (4200RPM); 40GB ATA-100 (5400RPM); 60GB ATA-100 (4200RPM) *Optional 40GB (5400) 2nd HDD Module for media bay I'm familiar with SATA and IDE, but ATA-100 doesn't ring a bell. What do I have to take into account when I go look for a replacement hard drive?

  Read the article

• How to use auto-discovery with iDRAC Enterprise?

  - by jwiz

  All I want to do is: have "auto discovery" enabled on my iDRAC enterprise at the factory rack the server, cable iDRAC to dhcp-enabled management network have the iDRAC DHCP, find the "Provisioning Server", and get updated with login credentials (for us to use with racadm, idrac webui, etc.) I don't need to do any configuring of the system, install OS, or anything else. I just want idrac to dhcp out of the box, and end up with an account that can be used to login. All the docs I can find on Dell's site refer to a "Provisioning Server", but I honestly can't tell if they have some reference product, or if they only have software that "integrates" with other vendor's existing management systems. I'd be happy to set up whatever is needed, I just can't find something that explicitly describes the process (only references to the fact that it is supported).

  Read the article

• Slight network lag on Small Business Server 2008 R2

  - by Sir.Nathan Stassen

  I recently upgraded a network from a SBS 2003 server to a SBS 2008 R2 Server. Both I and users have noticed a slight delay in network applications and browsing network drives on the new server. It is minor, maybe a second or two at most. However I am wondering if anyone knows of anyway to optimize the networking to service requests sooner to the workstations. The network is running a 1 gig network with some 100 meg devices (mainly network printers). All workstations are XP SP3 Network software runs out of a shared folder mapped as a network drive, no sql databases. Server is a Dell Poweredge T610 with plenty of ram, cpu power, and storage.

  Read the article

• Can I move a one drive RAID 0 array on a PERC 6 to another server?

  - by zippy

  We have a Dell Poweredge 2970 with a PERC 6/i RAID controller. We have a one drive RAID 0 array (we wanted to add the drive as a JBOD but the PERC forces you to create an array to access it from the PERC). Can we take the one drive RAID 0 and move it to a new server (one that doesn't have a PERC)? Since there's only one drive in the "array" there's no striping going on...the only issue would seem to be if the PERC has some metadata on the drive that would prevent Windows from reading it. Does anyone have any experience with this scenario?

  Read the article

• Cannot login to OpenManage Server Administrator

  - by ejel

  After freshly installed OpenManage Server Administrator from the CD that comes with my new server, Dell PowerEdge T110, I still could not figure out how to login successfully to the application. The server is running Windows 2008 SR2 Foundation and serves as a domain controller. I access its web interface locally using Firefox 3.6. On the login page and choose local system login. OMSA user's guide seems to state that I should be able to login using an Active Directory user. I tried Administrator, my_domain\Administrator, a a few combinations with the correct password. But none of them can logged in. Does Server Administrator requires any additional treatment to the user accounts, or what are the steps I missed here?

  Read the article

• Converting a Full HD Inspiron 9400 laptop LCD to a standalone monitor

  - by jhaukur

  Has anyone tried converting a LCD laptop monitor (17" full HD in this instance) to a stand-alone monitor? Are there any converters that one can buy to send DVI or VGA signals to the plug that is used to connect said LCD to the laptop motherboard? My laptop is the infamous Dell Inspiron 9400 (1705) model. They can have awesome monitors but if you check out ebay, there are many there for sale for little to nothing since the graphic cards fault unsually often in those machines. I'd like to be able to use the LCD and just scrap the rest.

  Read the article

• Video issues with old server running Boxee

  - by Skaughty

  I have a old Dell Power Edge 1650 1U rackmount server running Windows XP. Dual 1.3 ghz Processors and 1 GB of RAM. I would like to run Boxee on it, but the 8mb integrated video card will not support it. The font within Boxee just comes up as blocks of color. I have a PCI Radion R9000 dual out video card. However when I plug it in I can not get video signal on any of the VGA outs. Is it possible to upgrade the video card on this old of a server, or is it possible to make it work with the older integrated video?

  Read the article

• Can I rebuild degraded RAID1 on a SAS 5 i controller with a larger mirror drive size?

  - by Kenny

  Hi, A drive failed on a Dell SAS 5i controller - see controller bios screengrab: http://imagebin.ca/view/SkZbszA.html The primary is a 160GB 10k sata drive. I added a 250GB 7k rpm drive in the hope that the array would rebuild onto this drive. This did not happen. (assuming that the controller would just operate at the speed of the slowest drive) The controller could see the new drive, but it didn't automatically rebuild the raid1 onto this drive. (my assumption is that it did not do this rebuild as the drive sizes are different). There was an option to add the new drive to the existing raid1 array - but when I tried this a message appeared stating that all data on the array would be lost. (I didn't get a screenshot of this message, I will later) Should the SAS 5i allow me to rebuild the array onto a larger drive? Is the option to add the drive to the array the right way to go? Many thanks!

  Read the article

• Upgrading drives on a MD3000

  - by Anonymouse

  Hello, Our MD3000 array is getting full as our databases are growing and we need more spaces. Currently, we use a MD3000 with a two-servers Windows 2003 cluster and 15x 73GB SAS drives. Disk groups are configured in RAID1 of two drives. The approach we are currently investigating is simply swapping the existing SAS drives with bigger ones (300GB instead of 73GB), one at a time, and let each RAID1 array rebuilt. Is it a good approach? Will we be able to resize the array afterwards? Will we be able to resize the partitions afterwards? Can the Dell M3000 Management software do it or will we have to bring the server offline and use some partition software to do it? Thanks in advance.

  Read the article

• Suggestions for Troubleshooting WIndows 7 lockups

  - by Craig L

  I've got a Dell Latitude E6500 that was working fine under Vista x64. I got one of the new Seagate 500GB Hybrid SSD/HD 2.5 drives and thought.. hmm.. let's try Win 7 x64 on it. Bottom line: It works great for hours and then it will hard lock. I don't mean BSOD (or whatever the Win7 equivalent is). I mean my screen is displaying a static image (if there is a clock displayed, it will be frozen at the time the lockup occurred) and the mouse and keyboard do not work. Control-Alt-Delete will not work. I have to hold down the power button to reboot. The event log records NOTHING at the time the lockup occurs. Obviously something is happening to the system to cause the lockup, but the default Windows 7 x64 doesn't log it. How can I log the things Windows doesn't normally log in Event Viewer ?

  Read the article

• Secondary Monitor won't Display at Full Resolution with Primary Display Disconnected

  - by Laramie

  I have had a bad day. Among today's events, the LCD display on my Dell E6500 notebook failed. It had been working with a secondary monitor connected through a VGA cable at 1600x900 resolution until I removed the LCD from my notebook for repair. Now the max resolution available on the secondary display is 1024x768. If I reconnect the burned out primary display, the secondary monitor is again available at 1600x900. The video card is an onboard Mobil Intel 4. How can I maintain the secondary display at 1600x900 with the primary display disconnected (for repair)? Edit: I just noticed that when Windows boots, it displays at the correct resolution and I can see my desktop in all its glory for a couple seconds then reverts to 1024x768.

  Read the article

• Brand New MOnitor Won't Get Input From CPU

  - by HollerTrain

  I have an old Dell 2350. I found a HD a few months ago and plugged it in and it booted up. So I just purchased a monitor and plugged it in, and put the HD inside and connected the two connections (Bus, and a four pronged connector) and no signal is being sent to monitor. is this a monitor issue or the HD is just dead? HD is spinning. CPU is turned on :) Yet no signal.. any thoughts?

  Read the article

• Looking for a laptop with a removable hard drive

  - by anno

  At the moment, I possess a Dell Inspiron 6400. Just removing two screws, I've made the drive removable (look here) and I can pull it off in one second. The new Inspiron and Studio laptops don't support this anymore (the drive is no more on the side but on the back of the laptop). So I’m looking for a new laptop having this kind of feature, or one that can be modded easily. I also need a : Screen = 15" (if possible resolution 1366 x 768 resolution) Core i5-520M Midrange GPU (like an ATI Mobility Radeon HD 5650) Decent battery life minimum fan noise Thanks.

  Read the article

• SATA drive not recognized when installing RHEL 5.1 on PowerEdge R410

  - by Rachel

  Here's my setup: Dell R410 with Perc S100 (software) raid controller on an Intel ICH10R chipset The first problem is that the Perc S100 is only supported on windows. I'm trying to install RHEL 5.1. It boots from the cdrom, but later the installer can't see the cdrom or hard drive. Both are connected to the on-board sata controller. The only options in the R410 bios for SATA are ATA or RAID. I don't need raid, I just want a single drive setup.

  Read the article

• Intsalling Linux on PowerEdge R410 via USB

  - by Bill Johnson

  I’m hoping someone can help me with the following issue. I have a Dell PowerEdge R410 and basically the Optical Drive has failed when I have been given the server. I have installed 2 SATA drives and want to install Ubuntu 11.04; however, each time I have tried i.e. using bootable .iso on USB it failed. I assume it's failing as with a lot of releases they all look at the CD drive. Ubunutu has failed on installation with the error message unable to mount CD. I have tried installing Microsoft Hyper-v and that also fails as during installation it asks for CD/DVD drivers. Tried embedding ISO's from various distro's (Linux and Windows) with drivers and that hasn't worked out either. Does anyone have any idea on how I can get Ubuntu on this server? Should I look towards an old distro perhaps?

  Read the article

• What cable to connect Inspiron 1720 to HDMI TV?

  - by Bernhard Hofmann

  Hi I'm a little confused to say the least when it comes to video formats and protocols. I'd like to view my laptop output on my HD TV. The TV has HDMI, S-Video, and RCA inputs. My laptop has a VGA female port on the side for driving a 2nd monitor, and an S-VHS output at the back. No, it has no DVI, which I've heard is a poor decision from DELL, and even poorer decision on my part to buy it. Can I get true HD output from this to my TV? What cable do I need, or would I need a converter? Any other suggestions are also welcome, such as how to get something close to HD on my TV. Thanks! Bernhard

  Read the article

• Ubuntu PowerEdge T110

  - by Josh

  I just got a Dell PowerEdge T110 server. I moved the boot order to CD - HDD - NIC, then installed Ubuntu 10.10, Desktop Ed. I chose install alongside other OS (even though there was none), then chose use entire partition. It showed that Ubuntu would use 160 of the 160 available GB. It installed, updated (while installing), then said, need to eject and restart, as usual. It restarted, but to a blank screen. No output whatsoever. Not even BIOS. Just blank. The monitor isn't even woken from sleep. Power cycled, still doing it. Tested the monitor with a laptop, and it is fine. What on earth is going on here?

  Read the article

• PC will be turned off in safe mode

  - by abbasi

  I wanted to scan a Dell inspiron N5010 laptop in safe mode. When I took it to the safe mode environment and ran the AV to scan, after some while the PC went out! The power options menu options (when plug is in) are as follows: Screensaver after 4 mins. Dim to display after 10 mins. Turn off display after 15 mins. Hard disk, sleep and hibernate are all off (set to never). I tested the machine without scanning it, i.e, went to the safe mode and waited to see what occurs after time elapsing. By observations so far (because I can apply more tests to determine that where the problem exactly is), the problem is when the machine is in safe mode and is doing something (in current case, scanning). What do you think? Why it goes out in this situation please? Thanks in advance.

  Read the article

• Computer wakes itself few seconds after hibernation

  - by Juan Zamudio

  Hi all, this is the situation, this is a Dell Optiplex 755, I recently upgraded it to Windows 7 64 bits, it had Windows XP SP3 previously, on XP I never had a problem hibernating the PC, now with Windows 7 64 every time I hibernate the PC it wakes it self after 5 or so seconds. Here are the steps I already tried: On Windows 7 I enabled the hibernation following this steps In the MoBo the sleep settings are on S3 In the Mobo I disable remote wake ups I have disabled the remote wake up in the NIC When I run the lastwake command I get unknown device or something like that I already disable the wake timers on Windows I have the latest drivers from Intel, but I just found out that in the device Manager I get a warning sign on the "Intel AMT SOL (COM3)" device saying that it failed and windows stopped the device, I reinstalled the Intel drivers but nothing changed. The only thing that I haven't touch is Intel ME in the MoBo but I don't if that could help and what settings are correct. Thanks for you help.

  Read the article

• Brand New Monitor Won't Get Input From Computer

  - by HollerTrain

  I have an old Dell 2350. I found a HD a few months ago and plugged it in and it booted up. So I just purchased a monitor and plugged it in, and put the HD inside and connected the two connections (Bus, and a four pronged connector) and no signal is being sent to monitor. is this a monitor issue or the HD is just dead? HD is spinning. CPU is turned on :) Yet no signal.. any thoughts?

  Read the article

• What causes Windows Boot to stall?

  - by Nick Berardi

  For about 6 months now I have been having this weird problem where Windows 7 fails to fully boot correctly. What happens is this. Starting Windows shows up on the screen. Then 3 out of 4 times nothing else happens, no Windows Flag animation, just nothing occurs. After 3 or 4 restarts repeating steps 1-2 above, the Windows Flag animation finally shows up and everything works as expected. My question is what is causing this problem in steps 1 and 2? Because I have tried the following with no luck: Error checking and correcting of any disk errors Updating drivers Doing a clean install of Windows 7 My setup is as follows: Windows 7 64-bit Ultimate 8 GB RAM 128 GB Crucial SSD (firmware 0005) Dell Latitude E6410 Intel Wireless and Graphics Other than what I have tried above I am totally out of ideas and looking for some new ones to try.

  Read the article

• Motherboard rejects identical hard drive, one works the other doesn't

  - by Payson Welch

  I have an interesting situation. I have a Dell XS23-SB server that has four blades in it. The blades use Supermicro X7DWT motherboards, and interface with the sata drives through a backplane. I took two identical drives from a raid 0 enclosure that came from the factory (GDrive), one works on all four servers, the other does not. I verified that they both work by plugging them into a hard drive cradle. This behavior can be repeated with other drives, some drives work and some don't. However when i test them, they ALL work on my PC. What could cause this?

  Read the article

• Volume display for laptop missing after driver update

  - by Cyclone

  I have a Dell Inspiron 1520, and I just updated my audio drivers to be able to use Stereo Mix. It's a SigmaTel audio driver. Prior to the update, whenever I used the hardware buttons to update volume or mute/unmute speakers, it would always have a nice display like this one: But, for volume instead of screen brightness. The hardware buttons still work fortunately, but the volume display is gone. Is there a place I can configure this setting and re-enable it? The speaker icon in task tray was also disabled with the update, but I re-enabled that from the Control Panel. Is this simply gone with the driver update? Thanks for the help!

  Read the article

• what can I do with an old but working PC [closed]

  - by fskreuz

  I have an old Dell optiplex GX240 on Pentium 4 1.8Ghz and 256MB Ram (or was it 512MB). It's still in working condition but it's getting slow for me and i wanted to optimize it. I just want that old box to be usable even for simple desktop use (email, surfing, chat). I also have to note that my parents prefer use it over a laptop for some reason. Treat it as a "box-type netbook". unlike the other threads that they all prefer sending away or use as file server, firewall and that, i am looking for suggestions on how to keep it usable as the main PC. any suggestions? OS perhaps?

  Read the article

• About Eucalyptus Virtualization Support

  - by rammayur

  I am having hp 540 notebook with processor core 2 duo. I have installed CLC,CC,SC and Walrus runs fine when I try to run NC, I get error "Not virtualization enabled" means my laptop does not support virtualization. I got it. Then, In my college, there is Dell desktop PC having processor Core 2 Duo. But it has virtualization enbled.So I get confused. How same thing has different effects. So my questions are Which thing is essential for Virtualization?? What should I upgrade in my Laptop Processor or buy a new one?

  Read the article

< Previous Page | 28 29 30 31 32 33 34 35 36 37 38 39  | Next Page >