Search Results

Search found 2702 results on 109 pages for 'dell xps'.

Page 37/109 | < Previous Page | 33 34 35 36 37 38 39 40 41 42 43 44  | Next Page >

  • Using a Dell PowerConnect to set up load balancing/redundancy, 1 switch 2 routres 2 private wan link

    - by MarianoC
    Hi, We have different locations connected by two different WAN providers. Each site has a dell powerConnect 6224 and two cisco routers with the WAN connections (we don’t have access to router admin). The 6224 connects to each cisco LAN port and to our LAN backbone. We would like the 6224 provide the ip gateway address and load balance and support redundancy, if one of the routes fail. Is this possible?. We can't find any samples on doing this and we have tried with no success. Any help or link to documentation regarding this, will be greatly appreciated. Thanks, MarianoC

    Read the article

  • Upgrading HP DL185 G5 8LFF, is using a Dell J1520 4-Drop SATA Adapter possible?

    - by jpreed00
    The HP DL185 G5 8LFF model supports 8 3.5" drives and 1 optical drive. However, instead of the optical drive, I'd like to have 2x 2.5" drives instead. The problem is that the PSU has no more SATA power cables (even though the motherboard has 4 additional SATA data ports). The PSU does have a free 10-pin connector and it looks like the J1520 cable from Dell would fit the bill. Link to cable description Does anyone have any experience using these cables? Are they safe? Any other ideas for adding the disks to the server if I don't use the cable? Thanks!

    Read the article

  • How do you expand a raid disk array in a dell 2850?

    - by johnny
    Hi, I have a Dell 2850 and I want to install Windows 2008 Server. Problem is that my C drive only has 16GB of space. The requirements say I need at least 20. I have an open bay for a drive. If I put in another drive, how can I add that to the array and them make it only for the C drive? what do I do? Thank you. edit: I don't want to remove any drives. I just want to add a new one to the existing array. Can I do that and make sure that new drive is for the logical C drive?

    Read the article

  • Boxee on Dell 32in TV causes headaches, how to troubleshoot?

    - by brown145
    I have revamped an old pc, installing 4GB ram and a 256MB video card so that I could run Boxee to a Dell W3200 series TV that came with my apartment. It is connected via VGA, resolution is 1360x768, 24bit color, 60Htz refresh rate. Unfortunately, every time I use it I end up with a headache after less that 30 min. I have had my eyes check recently, and am able to play xbox (connected via hdmi) on the same TV without problems. What are the potential causes? My system seems to well meet or exceed the min requirements for boxee, XP, AMD Atholon 64 X2 Dual Core, 4GB RAM. Could it be the VGA cable? What is the most cost effective way to trouble shoot?

    Read the article

  • How do I improve picture quality while streaming live football (soccer) from my Dell D600 to an HDTV?

    - by Bob
    I have fibre broadband with speeds up to 38mbs, my Dell D600 has its max 2gb ram and has an ATI Mobility RADEON 9000 4xAGP 32mb card in it...Its TV support it says is NTSC or PAL in S-video and composite modes with a 7-pin mini-DIN connector (optional S-video to composite video adapter cable) and a vga port which i am using at the moment... The laptop runs Windows XP, an 80g HD with only windows + necessary updates and anti virus software on it..... There is HDMI on the TV, but not the laptop Fairly slow moving and close up pictures arent too bad, but when the movment is fast(a shot on goal) or in the distance, I cant see the ball and the images go out of focus.

    Read the article

  • Need to hookup HP dv7-3085dx with NVIDIA GeForce GT 230M to my Dell 30 inch LCD 3007WFP at max resolution

    - by user14660
    I recently bought an HP laptop (dv7-3085dx) which is supposed to have a pretty good video card (NVIDIA GeForce GT 230M). The card is supposed to output a max resolution of 2560x1600 which is also the max resolution of my monitor. I've now bought an HDMI to dual link DVI cable - this is after Best Buy's 70 dollar HDMI to DVI (perhaps it was 'single' link?) didn't give me the best resolution. In Windows 7, when I try to set the max resolution for my 30" monitor, I only get 1280x800, which is absurd. The monitor is great, I love the laptop and the video card supposedly supports such resolutions. I therefore can't figure out why I'm not getting a better resolution. When I "detect" my monitor in Windows 7, it is shown correctly as a DELL 3007WFP!

    Read the article

  • solve a partition misalignment?

    - by learner
    I have a new Dell XPS laptop which had Windows 7 installed in it. It also had a default extra partition for "Dell Utility". I installed Ubuntu in it on an Extended Partition along with windows and specified the logical partitions myself (for /,/home and swap). Now when I open Disk Utility , it shows this "Partition misaligned by 512 bytes" error for the Dell Utility partition and "Partition misaligned by 1024 bytes" for the entire Extended partition where Ubuntu is installed. Deleting the extended partition and re-installing Ubuntu may solve the problem of misalignment in the extended partition. But how about the Dell Utility partition? If I re-install Windows 7 Dell Utility wouldn't be a part of the re-install. So that may not solve it either. How do I fix this? Note: The extended partition I made contains an NTFS logical partition for holding data accessible by both OSes(basically a personal data partition). EDIT: I deleted all my Ubuntu partitions and re-installed Ubuntu like before,this time making them partitions with GParted via LiveCD. Now the only problem is that there is a misalignment in the Dell Utility partition. The other misalignment got fixed. Now how do I get rid of that issue?

    Read the article

  • Max. Temp. on Intel Burn Test for Stock Dell Precision T3500

    - by HK1
    I'm troubleshooting an issue on a Dell Precision T3500. As part of my troubleshooting I've decided to try running a stress test using Intel Burn Test software. This machine is a stock configuration with 12GB of RAM and a Xeon W3670 processor (nothing overclocked). When I run IBT using the standard mode, SpeedFan reports a processor temperature in excess of 80C. I've seen numbers as high as 90C but even at that temperature the machine does not become unstable or crash. However, it seems way too high. This processor has a TCase of 67.9C according to Intel's website. I'm guessing that means I'm in the danger zone any time I go over that temperature. I've checked the cooling system and everything looks fine. I've even took out the heat sink and reinstalled it with new thermal compound. This did not appear to make the problem better or worse. Is there a discrepancy somewhere here in the way temperatures are measured or displayed? I've also tried using HWMonitor from CPUID and it reports the same temperatures. Should I just let the Standard Test go and disregard the temperature outputs?

    Read the article

  • SCSI Windows Setup on Dell Precision 670 Workstation...please help.

    - by sweetcoder
    Error Windows Setup: "setup did not find any hard disk drives installed in your computer" This is not exactly a programming question but I thought you guys might be able to help. I just received a Dell Precision 670 workstation. Windows is not recognizing the hard drive and I have experienced this before with other computers. I usually would just go in the bios and set the configuration to compatibility mode. I have no idea how to do this on this machine. There is this Adaptec SCSI HostRaid BIOS v4.30.4S5 screen on startup. It says to press CTRL A for SCSI select utility. It shows a Maxtor ATLAS10K5_73WLS for the drive. I was wondering if anyone out there knew how to configure this thing so that windows setup will recognize the hard drive? Any advice is very much appreciated and if you have to know further information please let me know. Raid was turned off in the BIOS for this device. TY

    Read the article

  • Anyone know how to get dual screens working on a Dell E6410 laptop with Ubuntu 10.04 64 bit?

    - by Curtis
    I've installed the drivers from nVidia. When I go into the NVIDIA X Server Settings application, in the X Server Display Configuration setcion, and click the "Configure" button, "TwinView" is disabled. Also, clicking "Detect Displays" doesn't pick up my monitor (which is connected through a port replicator - keyboard and mouse in that port replicator work fine). Has anyone else seen this? Is this just a limitation of the current nvidia linux drivers?

    Read the article

  • Getting Wireless working on Dell Inspiron 1545 in Ubuntu 10.04?

    - by Dexter
    I'm trying to install my wireless drivers (which uses a broadcom card). I tried to install them using the restricted drivers offered on my Ubuntu CD. However when I clicked activate it got about halfway through the install process before it gave me this error message: SystemError: installArchives() failed How can I correct this?

    Read the article

  • Anyone know how to get dual screens working on a Dell E6410 laptop with Ubuntu 10.04 64 bit?

    - by Curtis
    I've installed the drivers from nVidia. When I go into the NVIDIA X Server Settings application, in the X Server Display Configuration setcion, and click the "Configure" button, "TwinView" is disabled. Also, clicking "Detect Displays" doesn't pick up my monitor (which is connected through a port replicator - keyboard and mouse in that port replicator work fine). Has anyone else seen this? Is this just a limitation of the current nvidia linux drivers?

    Read the article

  • Dell Windows 7 DVD includes IE9, where to find IE8?

    - by mjmcinto
    It appears as though we can now only get a 64 bit installation of windows 7 to come with IE9, and I cannot find an installer for IE 8 for it. This presents a problem, as I am building a new machine for a developer, but the company does not support IE9 yet, and all development needs to be able to be run on IE8. I would rather have them on a 64 bit version of windows so they can have more than 4GB of RAM (can get IE8 on 32 bit win 7). Does anyone know how to get IE 8 on a new 64 bit version of win 7?

    Read the article

  • Does the Dell Inspiron 1501 handle more than 4 Gb of RAM?

    - by zillion
    After the following comment on my last question, I'm thinking about upgrading my RAM: I got a 160 GB Scorpio Blue a couple months ago for my 1501. It's nice. That + 2 GB Crucial RAM have rather revived my notebook (meaning a very nice speed and storage boost). I was outgrowing it... – Nathaniel What would be the best choice to add more RAM? I've already got 2 GB, but I'm not sure what their speed is. What are the size, type and speed limitations for RAM on my particular laptop?

    Read the article

  • Dell Vostro 3500 battery life remaining missing from Windows 8?

    - by Misha
    On Windows 7 a Vostro 3500 laptop shows the battery life remaining, while on Windows 8 this information appears to be missing. The percentage is still available, but the life remaining is missing. How is battery life remaining calculated and does this require some level of driver support? Is it a standardized interface? Does anybody know which driver is responsible for handling this feature? I want to force the old Windows 7 driver, but I don't know which driver does battery remaining.

    Read the article

  • I have to manually enter the pwd when I login at school and when I come back home with my laptop (DELL E6410)

    - by Bong Paduano
    I didn't have to do this the first 3 months of me going to school. My laptop used to be able to connect to my Home WiFi and school Wifi automatically then after the 3rd month something changed and eversince then I literally have to manually enter each of the Wifi passwords in each location each time I try to connect to their respective WLAN. I tried adding each WiFi networks in the "Manage wireless networks" section in the Network and Sharing Center but everytime I login to one of the location, the created network disappears and I did this more than once. I tried restoring the OS back but to no avail. Can someone please assist me on this issue. I'm not sure if this issue has been addressed in this website but I haven't seen any similar question in here. I appreciate any help anyone may be able to share.

    Read the article

  • WoW Severe graphical Corruption on Ubuntu 11.10

    - by Desiderantes
    I get those graphical glitches when running WoW 4.2.0 with wine (Ubuntu 11.10 AMD64), in a Dell XPS 15(L501X), even with ironhide. Anyone can help me? CPU: Intel Core i5-460M 4gb RAM because it's a Dell XPS 15(Optimus Technology), i have 2 graphic cards: An Intel HD 460M integrated graphics card, which driver is i915 A nVidia GeForce GT 420M, ALREADY with propietary drivers Running Ubuntu 11.10 AMD64 with custom XFCE Desktop Wine 1.4 rc6(Emulating winxp) corefonts and vc2005 installed on Wine http://i.imgur.com/FDU6x.jpg

    Read the article

  • Looking for an ultra portable laptop for Ubuntu

    - by prule
    Hi, I'm in the market for a new laptop, and portability is important since I really only use it when I'm travelling to and from work - primarily for programming. I've been searching high and low for something like this: less than 2kg hopefully Intel i5 (but negotiable) NO dvd drive - just don't need it 4G ram either 7200rpm disk or SSD (ssd preferable) 13 inch screen not too pricey (MacBook Air is about $1700 AUD) available in Australia The Dell Inspiron 13z and Lenovo Edge 13 look close, but I've not found anything that says I'm not going to have a fight with compatibility. The MacBook Air 13 looks like the PERFECT hardware, but I'm afraid it will just be easier to run MacOS than Ubuntu. I want to stay with Ubuntu, but the MacBook Air is only $1700 so I'm in danger of becoming another apple fanboi if I can't find anything competitive. Going through all the sites looking for stuff has been a huge waste of time System 76 doesn't deliver to Australia http://www.linux-laptop.net/ and http://www.linlap.com/ are hard work and not confidence inspiring http://www.vgcomputing.com.au/nsintro.html is hard work again, searching for every laptop they say has excellent compatibility on the web to find out what spec it is http://zareason.com/shop/Strata-Pro-13.html (at $1345 USD) looks interesting, but I've got no idea how much I'll get stung by customs importing Dell Inspiron 13z with i5, 4G, 320 7200rpm disk, ATI Mobility Radeon HD5430 - 1GB, Dell Wireless 1501 802.11b/g/n @ $1200 AUD seems like the only competitor but is it compatible? (Dell support offer no opinion - as far as they are concerned they only have 2 models that are certified for ubuntu) Am I worrying too much about the compatibility? Should I just go with Dell? Or switch to MacOS? (It would be good to have a searchable database that had the full machine specs, and compatibility - I'm thinking about building something... but I don't have much time right now...) Thanks. UPDATE I went with a MacBook Air. The price/weight/power was just right. Everything else was either too pricy (i5) or too heavy, or underpowered (SU7300 1.3GHz). Its a pity, because I didn't really want to leave Ubuntu. I'll still run it on my media center and spare (heavy) laptop.

    Read the article

  • Seeking solution for printing-reporting .NET

    - by Parhs
    I am developing an application that prints in separate threads in extreme cases about 20-25 pages per minute to various thermal printers. Currently templates for these are XAML xps documents. All printers have graphics drivers that support EMF/GDI printing. So GDI-EMF is done by operating system resulting in slower performance. Sending raw text for printing is another good solution but doesnt work always , because some clients have old chinese thermal printer that nobody support thus impossible to change codepage / emulation. So it doesnt work always. Also most computers running my software are low end ATOM CPU. So I am thinking to return to GDI, EMF printing and have both Text-Only reports and EMF reports. Another reason i want EMF is because here receipts are signed by Electronic Fiscal Memory device.Most of these dont do good job extracting text from XPS as they dont follow the standard but how windows convert GDI to XPS.Even with text-only mode some of them dont support all character encodings and are impossible to send paper cut command after the sign. I know that using a reporting engine would solve rendering problem but I dont want to buy one. All I want is to be able to show tabular data and insert an image and replaced text.I know there is StringTemplate that could do the generation of template but the problem is i should parse somehow the template and render it using GDI commands. Is there any other solution/approach for this ? Or is there anything ready ?

    Read the article

  • How to use a DVI/HDMI monitor with Mac Mini's DisplayPort?

    - by dr dork
    If I buy a Mac Mini, how can I use it with my Dell monitor? The Dell does not have a DisplayPort, only DVI and HDMI. I was looking at the Mac Minis and noticed they don't have DVI or VGA ports. Does the Mac Mini come with any kind of an adapter that will allow me to use my existing Dell monitor? Thanks in advance for your help, I'm going to start researching this question right now.

    Read the article

  • Why does Outlook 2007 lose connection to Exchange when Windows 7 64-bit turns off display?

    - by Greg R.
    The problem: When Windows 7 puts the display to sleep, Outlook 2007 and also Microsoft Office Communicator 2005 lose the connection to the Exchange server. When I unlock the computer, Outlook is logged out of Exchange and prompts me for credentials (although usually I have to restart Outlook to get it to reconnect). The network connection is still active, e.g. other applications don't lose their connection to the network or Internet when Windows 7 puts the display to sleep. I'm using a Dell E5400 notebook running Windows 7 Enterprise 64-bit with Outlook 2007 connecting to a corporate Exchange server (not sure if it's Exchange 2007 or 2010). The Dell is typically docked and connected via DVI (through the dock) to two Dell monitors. The Power Options in Windows 7 are set as follows: Turn Off The Display: 15 minutes Put The Computer To Sleep: never Those are the "Plugged In" settings but the problematic behavior is the same when running on battery. When Windows 7 turns off the display, it automatically locks the computer. E.g., I have to re-enter my credentials to access the machine. This is per corporate policy. The equivalent set up on my previous Dell notebook running Windows XP SP3 did not result in this problem with Outlook 2007 or Office Communicator 2005 connecting the very same exchange server. The problem began when I switched to the new Dell E5400 with Windows 7.

    Read the article

  • USB Wireless keyboards not registering Ctrl Alt Delete when computer boots

    - by Donovan
    I've recently installed a new PC at work. Its a Dell Optiplex 9010. I bought a USB wireless keyboard and mouse from Dell and subsequently from Logitech to use with this PC. The Dell keyboard is a model KM632 and the logitech is an mk260. Both units work properly and have decent range. The issue is when the PC boots they keyboard (neither model) will register a Ctrl+Alt+Delete to the PC. I can say for sure the keyboards are still functional as the media keys will still produce a result (notably the sleep key on the mk260). My gut reaction is I'm dealing with an issue in the PC or Windows. I'm not sure where to start though. If I unplug and reinsert the USB dongle both units will work. Also, I don't use both they keyboards at the same time I bought the Logitech fearing the Dell unit was bad. Any ideas would be appreciated.

    Read the article

< Previous Page | 33 34 35 36 37 38 39 40 41 42 43 44  | Next Page >