Search Results

Search found 1999 results on 80 pages for 'dvd authoring'.

Page 32/80 | < Previous Page | 28 29 30 31 32 33 34 35 36 37 38 39  | Next Page >

  • Mac Air Bootcamp Windows 7 Installation and USB3 Hurdles

    - by Casey
    I am trying to load windows 7 on a new Mac Air(OS X 10.9 Mavericks) using Boot camp, a downloaded windows 7 iso file, and USB3 flash drive. No obvious issues with stepping through the initial phases of boot camp and disc partition, but when the system reboots to load windows setup/install from the USB3 flash, it stalls after a few screens and gives a "missing cd/dvd drive" error. I have read similar posts regarding this fail that imply there is possibly a windows 7 compatibility concern with USB3, and that if a USB2 port is available....or if you can change your BIOS to make your USB3 look like USB2...then you can get around this error. Unfortunately I only have USB3 ports on this system, and it appears accessing the PC equivalent "BIOS" on the new Macs is very difficult....and if you screw it up you can ruin the system. Does anyone have any suggestions? I should also mention that there is NOT a CD/DVD drive on the Mac Air....and I can't migrate to Windows8 (for various reasons). Any help is much appreciated!!

    Read the article

  • Install Win7 on Dell XPS1730: CD Driver missing

    - by Mies75
    Vista crashed on my DELL XPS 1730 laptop. Again. I deleted the RAID array, created a new one and started to install Window 7 from DVD. During the initial phase of installation the setup pop ups this: Load Driver: A required CD/DVD device driver is missing... I can then insert other media to load the drivers, but it can't find any. I checked the DELL site for drivers but I can only find firmware for the drive. Which driver do I need, and where can I download it?

    Read the article

  • How to install Win7 over top of WinXP partition?

    - by Zeno
    I have a 2TB hard drive with 2 partitions on it, one a C drive for WinXP and another for extra space. I have a Win7 Pro install DVD and I have formatted that C drive via the DVD; it is now a blank "Primary" partition. I attempted to go through the Win7 setup and install it on that partition, but it's giving me an error: Setup unable to create new system partition or locate existing system partition. See setup log files for more info Googling around leads me to believe the entire drive has to be "cleaned" (diskpart) but that would wipe the entire other non-OS partition and I need to keep that data. How can I install Win7 on this blank partition without losing data on the other partition?

    Read the article

  • Multiple CD writer taking long to burn

    - by Mirage
    I have installed 6 DVD writers in Tower case. I am using Alcohol Software to burn multiple CDS. I have seen that about 4 dvd/cd writer finish recording early but some take long time finish and their speed is around 7x. Its not that those are the only writers doing that, some times other writer write slowly. But there are always 1 or 2 writer which takes about 25 min to write the 700Mb cd and some finish in 5 mins Why is that. All writers can write upto 40px speed. Which thing determines the speed

    Read the article

  • Restore complete PC from another computer

    - by Mirage
    I have a few friends which keep on coming to me every month to format their laptops and then reinstall Windows. This is time consuming. Is there any way that I can make an image of their full system on my Harddrive and then restore to their Laptop from my computer? Edit: What I want is I have the image of the whole laptop on my desktop. The laptop is formatted with no OS. I have no CD/DVD to put in laptop (as the image is 15GB). How will I trasfer the image from my desktop to the laptop without using CD/DVD? Any option for booting via network, etc?

    Read the article

  • How to install Windows (x86/x64) on Linux (Ubuntu)

    - by yorrany
    I installed Ubuntu edition (10.04) on my windows 7, completely eliminating it to the original installation. After I was forced to reverse the process, but could not find tools or explanations of how to do it. To clarify the equipment, it is: a netbook, acer, no optical drive cd / dvd, the process should be fully via USB. I hope I was clear enough, count on the support of you. Thank you. -- Instalei a edição Ubuntu (10.04) sobre meu Windows 7, eliminando completamente a a instalação original. Depois fui forçado à reverter o processo, mas não encontrei ferramentas ou explicações de como fazê-lo. Para esclarecer sobre o equipamento, trata-se de: um netbook, acer, sem leitor óptico de cd/dvd, o processo deverá ser totalmente via USB. Espero ter sido bastante claro, conto com o suporte de vocês. Muito obrigado.

    Read the article

  • How to install Windows (x86/x64) on Linux (Ubuntu)

    - by yorrany
    I installed Ubuntu edition (10.04) on my windows 7, completely eliminating it to the original installation. After I was forced to reverse the process, but could not find tools or explanations of how to do it. To clarify the equipment, it is: a netbook, acer, no optical drive cd / dvd, the process should be fully via USB. I hope I was clear enough, count on the support of you. Thank you. -- Instalei a edição Ubuntu (10.04) sobre meu Windows 7, eliminando completamente a a instalação original. Depois fui forçado à reverter o processo, mas não encontrei ferramentas ou explicações de como fazê-lo. Para esclarecer sobre o equipamento, trata-se de: um netbook, acer, sem leitor óptico de cd/dvd, o processo deverá ser totalmente via USB. Espero ter sido bastante claro, conto com o suporte de vocês. Muito obrigado.

    Read the article

  • How to restore a windows 7 system from a secondary drive

    - by Klas Mellbourn
    I have a stationary computer with Windows 7 Ultimate 64 bit. The primary (SSD) hard drive seems to have stopped working completely, it is not even visible in BIOS. The computer has a secondary hard drive (non-SSD, NTFS, 2TB). I have had Windows backup running and saving backups to that secondary drive. I am planning to buy a new SSD drive to replace the faulty one. I want to restore the backup to this new SSD drive. What is the most straightforward way to do this? A step-by-step description would be greatly appreciated. Further information: I have a Windows install DVD and the computer has a DVD-drive. The secondary drive is not bootable, so I cannot currently access it. The new SSD drive will probably not be identical to the original, so it might need different drivers

    Read the article

  • Is it possible to install Windows Server 2012 on a Dell PowerEdge with PERC S100 card?

    - by Warren P
    According to Dell's own website, the Windows Server 2012 media driver "inbox" does not contain drivers for the Perc S100 controller that is in a Dell PowerEdge T110 II server we'd like to evaluate with Server 2012. I have found drivers only for Server 2008 R2, which is what the server is currently running. Is it possible to upgrade this server? (Booting up the Server 2012 DVD image leads to the expected result that it can not locate the system's hard drives or its hard drive controller card, as the drivers for the PERC S100 are not on the installation DVD image.)

    Read the article

  • Sudden restart when Ubuntu almost loaded from disc.

    - by Wesley
    Hi all, Here are the specs beforehand: ECS K7SEM motherboard AMD Duron 900MHz 2x 256MB PC133 SDRAM The Best Power MT-500P 500W PSU Integrated graphics No hard drive DVD-ROM - will update with brand & model Now, I was starting up this machine after it was left outside for 3 months in winter weather. (I got this from a friend.) I was able to get it started and tried to load Ubuntu from the DVD-ROM. It was fairly successful and got up to the point when the Ubuntu logo is glowing. However, when Ubuntu was about to go to the main screen, the computer crashed and automatically rebooted. Is there any reason why this is happening? Also, I should mention that when I try to hit Delete on the BIOS screen to go to Setup, it only shows a screen with four lines saying something Novell something... I will edit with exact lines. Should I be resetting the BIOS or something? Thanks in advance.

    Read the article

  • Why is the latency on one LVM volume consistently higher?

    - by David Schmitt
    I've got a server with LVM over RAID1. One of the volumes has a consistently higher IO latency (as measured by the diskstats_latency munin plugin) than the other volumes from the same group. As you can see, the dark orange /root volume has consistently high IO latency. Actually ten times the average latency of the physical devices. It also has the highest Min and Max values. My main concern are not the peaks, which occur under high load, but the constant load on (semi-)idle. The server is running Debian Squeeze with the VServer kernel and has four VServer containers and one KVM guest. I'm looking for ways to fix - or at least understand - this situation. Here're some parts of the system configuration: root@kvmhost2:~# df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/system--host-root 19G 3.8G 14G 22% / tmpfs 16G 0 16G 0% /lib/init/rw udev 16G 224K 16G 1% /dev tmpfs 16G 0 16G 0% /dev/shm /dev/md0 942M 37M 858M 5% /boot /dev/mapper/system--host-isos 28G 19G 8.1G 70% /srv/isos /dev/mapper/system--host-vs_a 30G 23G 6.0G 79% /var/lib/vservers/a /dev/mapper/system--host-vs_b 5.0G 594M 4.1G 13% /var/lib/vservers/b /dev/mapper/system--host-vs_c 5.0G 555M 4.2G 12% /var/lib/vservers/c /dev/loop0 4.4G 4.4G 0 100% /media/debian-6.0.0-amd64-DVD-1 /dev/loop1 4.4G 4.4G 0 100% /media/debian-6.0.0-i386-DVD-1 /dev/mapper/system--host-vs_d 74G 55G 16G 78% /var/lib/vservers/d root@kvmhost2:~# cat /proc/mounts rootfs / rootfs rw 0 0 none /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0 none /proc proc rw,nosuid,nodev,noexec,relatime 0 0 none /dev devtmpfs rw,relatime,size=16500836k,nr_inodes=4125209,mode=755 0 0 none /dev/pts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 0 0 /dev/mapper/system--host-root / ext3 rw,relatime,errors=remount-ro,data=ordered 0 0 tmpfs /lib/init/rw tmpfs rw,nosuid,relatime,mode=755 0 0 tmpfs /dev/shm tmpfs rw,nosuid,nodev,relatime 0 0 fusectl /sys/fs/fuse/connections fusectl rw,relatime 0 0 /dev/md0 /boot ext3 rw,sync,relatime,errors=continue,data=ordered 0 0 /dev/mapper/system--host-isos /srv/isos ext3 rw,relatime,errors=continue,data=ordered 0 0 /dev/mapper/system--host-vs_a /var/lib/vservers/a ext3 rw,relatime,errors=continue,data=ordered 0 0 /dev/mapper/system--host-vs_b /var/lib/vservers/b ext3 rw,relatime,errors=continue,data=ordered 0 0 /dev/mapper/system--host-vs_c /var/lib/vservers/c ext3 rw,relatime,errors=continue,data=ordered 0 0 /dev/loop0 /media/debian-6.0.0-amd64-DVD-1 iso9660 ro,relatime 0 0 /dev/loop1 /media/debian-6.0.0-i386-DVD-1 iso9660 ro,relatime 0 0 /dev/mapper/system--host-vs_d /var/lib/vservers/d ext3 rw,relatime,errors=continue,data=ordered 0 0 root@kvmhost2:~# cat /proc/mdstat Personalities : [raid1] md1 : active raid1 sda2[0] sdb2[1] 975779968 blocks [2/2] [UU] md0 : active raid1 sda1[0] sdb1[1] 979840 blocks [2/2] [UU] unused devices: <none> root@kvmhost2:~# iostat -x Linux 2.6.32-5-vserver-amd64 (kvmhost2) 06/28/2012 _x86_64_ (8 CPU) avg-cpu: %user %nice %system %iowait %steal %idle 3.09 0.14 2.92 1.51 0.00 92.35 Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s avgrq-sz avgqu-sz await svctm %util sda 23.25 161.12 7.46 37.90 855.27 1596.62 54.05 0.13 2.80 1.76 8.00 sdb 22.82 161.36 7.36 37.66 850.29 1596.62 54.35 0.54 12.01 1.80 8.09 md0 0.00 0.00 0.00 0.00 0.14 0.02 38.44 0.00 0.00 0.00 0.00 md1 0.00 0.00 53.55 198.16 768.01 1585.25 9.35 0.00 0.00 0.00 0.00 dm-0 0.00 0.00 0.48 20.21 16.70 161.71 8.62 0.26 12.72 0.77 1.60 dm-1 0.00 0.00 3.62 10.03 28.94 80.21 8.00 0.19 13.68 1.59 2.17 dm-2 0.00 0.00 0.00 0.00 0.00 0.00 9.17 0.00 9.64 6.42 0.00 dm-3 0.00 0.00 6.73 0.41 53.87 3.28 8.00 0.02 3.44 0.12 0.09 dm-4 0.00 0.00 17.45 18.18 139.57 145.47 8.00 0.42 11.81 0.76 2.69 dm-5 0.00 0.00 2.50 46.38 120.50 371.07 10.06 0.69 14.20 0.46 2.26 dm-6 0.00 0.00 0.02 0.10 0.67 0.81 12.53 0.01 75.53 18.58 0.22 dm-7 0.00 0.00 0.00 0.00 0.00 0.00 7.99 0.00 11.24 9.45 0.00 dm-8 0.00 0.00 22.69 102.76 407.25 822.09 9.80 0.97 7.71 0.39 4.95 dm-9 0.00 0.00 0.06 0.08 0.50 0.62 8.00 0.07 481.23 11.72 0.16 root@kvmhost2:~# ls -l /dev/mapper/ total 0 crw------- 1 root root 10, 59 May 11 11:19 control lrwxrwxrwx 1 root root 7 Jun 5 15:08 system--host-kvm1 -> ../dm-4 lrwxrwxrwx 1 root root 7 Jun 5 15:08 system--host-kvm2 -> ../dm-3 lrwxrwxrwx 1 root root 7 Jun 5 15:06 system--host-isos -> ../dm-2 lrwxrwxrwx 1 root root 7 May 11 11:19 system--host-root -> ../dm-0 lrwxrwxrwx 1 root root 7 Jun 5 15:06 system--host-swap -> ../dm-9 lrwxrwxrwx 1 root root 7 Jun 5 15:06 system--host-vs_d -> ../dm-8 lrwxrwxrwx 1 root root 7 Jun 5 15:06 system--host-vs_b -> ../dm-6 lrwxrwxrwx 1 root root 7 Jun 5 15:06 system--host-vs_c -> ../dm-7 lrwxrwxrwx 1 root root 7 Jun 5 15:06 system--host-vs_a -> ../dm-5 lrwxrwxrwx 1 root root 7 Jun 5 15:08 system--host-kvm3 -> ../dm-1 root@kvmhost2:~#

    Read the article

  • Download acceleration with jigdo?

    - by james
    Im using jigdo-lite to download a Debian DVD ISO. I already have the CD version of the image, so I added the CD files to the task. Now I need to download many files (not all) of the DVD ISO. The default jigdo-lite uses wget to download files. It seems jigdo (wget) downloads only one file at a time with one connection. So I'm getting a low download speed. How can I accelerate the download speed using jigdo? Possible Solutions: Using different download manager with jigdo. Is it possible? If yes, How? Using jigdo (wget) to download multiple files at once. How? Getting download links of remaining files to download so that they can be downloaded with a download manager and later added to jigdo iso. How?

    Read the article

  • Error: "The drive is not ready for use; its door may be open."

    - by TimTim
    On Windows Vista SP2 - I'm attempting to upgrade to Windows 7. After I put in the Windows 7 DVD in the drive, I receive the Windows 7 upgrade splash screen (so the drive is working at this moment). But then when I click "Upgrade to Windows 7", I receive a error message stating: Error: The drive is not ready for use; its door may be open Any ideas what's causing this error? Since receiving the error, I have already replaced the DVD drive with a brand new one and still receive the same error. I've also checked Device Manager and no hardware is reporting problems (no cautions or failures).

    Read the article

  • How do you create a bootable partition on a USB drive?

    - by Nathan DeWitt
    I have a bootable ISO designed to be burned to a double-layer DVD. I don't have a double layer DVD burner, so I would like to stick the ISO image on a 50 GB partition on a USB hard drive I have. How do I get the boot info onto the hard drive? If it helps, it's an OSx86 Live CD. Attempt 1: booted into Ubuntu 9.04 LiveCD deleted the partition on my existing USB hard drive sudo dd if=/path/to/image.iso of=/dev/MyUSB booted to USB drive error: Error Loading OS Atempt 2: booted into Ubuntu 9.04 LiveCD deleted the partition on my existing USB hard drive sudo mkdosfs -I -v -n iPC /dev/MyUSB sudo syslinux /dev/MyUSB sudo dd if=/path/to/image.iso of=/dev/MyUSB booted to USB drive error: Selected boot device not available - strike F1 to retry boot, F2 for setup utility

    Read the article

  • How to install Mac OS X Snow Leopard server on any virtual machine with DMG?

    - by Eonil
    I'm trying to install Mac OS X Snow Leopard Server on VirtualBox. I know this is duplicated question, however another questions have no fine answer. I'm trying to install on VirtualBox on iMac. So this is pretty legal. But the problem is I want to install with DMG image. Because installing DVD drive is too slow, and I have to install Mac OS X many times. And taking DVD disc from box is annoying too. But VirtualBox fails installing. It couldn't load kernel. It installs well with DVDs. Is there any way to do this? I'm considering using other VM solutions like Parallels or VMWare if they can support install from DMG images well. If you know about them certainly, please let me know.

    Read the article

  • Linux: How to break a large file into smaller files?

    - by Runcible
    I have a giant file (20 gigs) sitting on my source machine and I need to transfer it to my target machine. For the purposes of this question, let's assume that I do not have network connectivity between the two machines. I need to break this file into a series of smaller files, write the smaller files to DVD(s), then re-assemble everything on the target machine. Both source and destination machines are Linux boxes. Is there a way to accomplish this using tar? I have a feeling that I need to use the --multi-volume parameter. What are my options? I need to be able to specify the size of the volume files, in order to make sure that each one will fit onto a single DVD. Thanks!

    Read the article

  • RHEL kickstart with external DVDrom drive

    - by AndyM
    HI I've an old Dell poweredge server with an CDROM drive. I've attached a USB DVDROM and USB stick with my ks.cfg on so I can install RHEL from DVD not loads of CDs :-) I can boot from the RHEL media in DVDROM and point the installer to the USB ks.cfg. This works but the ks.cfg script has the cdrom keyword in it. The install then stops and asks for the RHEL media to be in the CDROM drive not the DVDROM. How can I change the ks.cfg so it uses the external DVDROM for the install media not servers builtin cdrom drive ? I know I can go and rebuild my DVD image to include the ks.cfg , but this is an extra step I dont want to do if I have to. Regards Andy

    Read the article

  • How do I fix "Setup did not find any hard disk drives installed in your computer" error during Win X

    - by CT
    I just bought a nettop. It came with WinXP Home. I first installed Win 7 on it. I wasn't that happy with the performance so I decided to go back to XP. I am using an external dvd drive and a Win XP Pro disc. I boot from the dvd drive and during the install get this error: Setup did not find any hard disk drives installed in your computer. Make sure any hard disk drives are powered on and properly connected to your computer, and that any disk-related hardware configuration is correct. This may involve running a manufacturer-supplied diagnostic or setup program. Setup cannot continue. To quit Setup, press F3. This is the nettop in question: http://www.newegg.com/Product/Product.aspx?Item=N82E16883103228

    Read the article

  • Complete Apple Powerbook G4 format without disk

    - by Sam
    I have gone through many sites to look for the exact answer. However I failed. What I want: To completely format my Powerbook G4 to factory or brand new without any DVD/CD or Disk/Disc I am not worried about ethical or un-ethical way. I just need to format the entire Powerbook G4 to factory setting WITHOUT ANY DVD/CD/DISC/DISK so that It’s a brand new one. I am ready to do anything, but please don’t advice me on buying or download the MAC OS 10.5 Leopard from torrent or blah blah.

    Read the article

  • How to install Windows 7 on Acer Aspire iDea 500?

    - by Martin R-L
    I've got a Windows 7 Ultimate 32-bit from MSDN Subscriber Downloads. The downloaded ISO boots fine from both a USB pen drive and a DVD on other computers. On the Acer it doesn't boot. The Acer iDea 500 can boot, and install, Windows XP Mediacenter from a DVD with slipstreamed SATA drives on it. Also, all kinds of Linux distros works perfectly fine on the iDea 500. I wouldn't mind using Mythbuntu instead of Windows 7 Ultimate, but it doesn't work very well.

    Read the article

  • How can I split a stereo audio track of a movie into two separate audio tracks?

    - by pesche
    I often record TV shows with a hard disk recorder/DVD writer, burn them as VRO file and convert to MP4 with Handbrake. The shows are bilingual broadcasts with two mono audio channels instead of a stereo one: dubbed voice on the left, original voice on the right. The TV set and VLC are both perfectly capable to play only the left or the right channel, but other video players may just offer to select between different stereo audio tracks (like they are present on many DVDs). I'd like to have an easy process to create MP4 or MKV files of these shows where the two audio channels are split into two separate audio tracks. The only way that I know of is to extract the audio track (e.g. using MPEG Streamclip), split it into two tracks using an audio tool like Audacity and then merge the audio tracks back (using a DVD authoring software, don't remember all details). Clearly not a thing to repeat regularly. Preferably a solution should run on Mac OS X, but Linux or Windows solutions are very welcome, too.

    Read the article

  • HP Pavilion dv6000 QuickPlay power on

    - by user22559
    Hello I have a question for HP Pavilion dv6000 owners. If your laptop is powered down, and you press the QuickPlay button or the DVD button (NOT the power button), does the laptop start up? More info: I am asking this because I have got a hold of a broken HP dv6000. If I power it up, the power light lights up, and then the laptop powers down. It seems to be because of a broken motherboard. But the laptop does the same thing if you press the QuickPlay or DVD buttons, and I want to know if that's supposed to happen, or if it's something else that is wrong.

    Read the article

  • How to solve my black screen at boot?

    - by Juanillo
    I've got a friend with a weird problem. When he starts his computer the screen is completely black until the computer is completely started. So the screen is black until it suddenly shows the Windows desktop. He said that this is happening since a technical service repaired his computer, but that repair is not now in warranty. Recently the computer stopped working, but as the screen is black he cannot access to BIOS or start in safe mode (by pressing F8). When he inserts the Windows Vista DVD the system doesn't boot from DVD (it mustn't be configured in this way in the BIOS). Maybe there´s a problem with the hardware (maybe the graphic card)? Can anyone explain a reason why the screen is black during start-up? Any idea of what to do with the computer to restore it?

    Read the article

< Previous Page | 28 29 30 31 32 33 34 35 36 37 38 39  | Next Page >