Search Results

Search found 10050 results on 402 pages for 'graphics card'.

Page 32/402 | < Previous Page | 28 29 30 31 32 33 34 35 36 37 38 39  | Next Page >

• Enable compiz on intel core i5 (Nvidia GT330M) based laptop

  - by Eshwar

  Hi, I am trying to enable compiz on my laptop via Desktop Effects but it does not allow it. I modified the xorg.conf file as on the compiz wiki but still no luck. So can someone just tell me how to enable compiz desktop on an Intel i5 based system. This is an Arrandale processor so its got the graphics bit on the processor itself. My system also has a discrete graphics card (Nvidia GT330M - yup its those hybrid graphics combos n- not Optimus). As far as i know the nvidia gpu is not being used since the intel one is enabled and there is no bios route to disable it. The laptop is a Dell Vostro 3700 with bios version A10 I did lotsa google searches about intel compiz, etc but not a single conclusive guide as to how to enable it. so my guess is it should work out of the box. but it doesn't. glxinfo gives me: name of display: :0.0 Xlib: extension "GLX" missing on display ":0.0". Xlib: extension "GLX" missing on display ":0.0". Xlib: extension "GLX" missing on display ":0.0". Xlib: extension "GLX" missing on display ":0.0". Xlib: extension "GLX" missing on display ":0.0". Error: couldn't find RGB GLX visual or fbconfig Xlib: extension "GLX" missing on display ":0.0". Xlib: extension "GLX" missing on display ":0.0". Xlib: extension "GLX" missing on display ":0.0". Xlib: extension "GLX" missing on display ":0.0". Xlib: extension "GLX" missing on display ":0.0". Xlib: extension "GLX" missing on display ":0.0". Xlib: extension "GLX" missing on display ":0.0". 3 GLXFBConfigs: visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat ---------------------------------------------------------------------- Segmentation fault lsbusb gives me: 00:02.0 VGA compatible controller [0300]: Intel Corporation Core Processor Integrated Graphics Controller [8086:0046] (rev 18) 01:00.0 VGA compatible controller [0300]: nVidia Corporation GT216 [GeForce GT 330M] [10de:0a29] (rev a2)

  Read the article

• Updated Intel display driver causing errors when booting

  - by cdysthe

  I upgraded to to Graphics Installer 1.0.6 on my Ubuntu 14.04 and installed the drivers using the Intel Graphics Installer. The laptop is Intel Ivybridge powered with Intel HD graphics. It Optimus but I have disabled the Nvidia card in bios. The Intel Graphics Installer installs the package i915-3.15-3.13-dkms.deb which I assume is the updated driver. It causes a bunch of error messages when I boot. Here are the relevant errors from dmesg when I boot: [ 7.206151] drm: module verification failed: signature and/or required key missing - tainting kernel [ 7.208045] drm: module has bad taint, not creating trace events [ 7.336470] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver [ 7.393854] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013) [ 7.393855] [drm] Driver supports precise vblank timestamp query. [ 7.393921] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 7.505798] [drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5 [ 7.507233] init: Failed to obtain startpar-bridge instance: Unknown parameter: INSTANCE [ 7.944183] [drm:cpt_serr_int_handler] ERROR PCH transcoder A FIFO underrun [ 8.368479] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 8.368480] i915 0000:00:02.0: registered panic notifier [ 8.818416] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off What could the problem be and will it affect performance? I tried to remove the package and the errors went away but I'm then running and older driver I assume?

  Read the article

• Fixed-Function vs Shaders: Which for beginner?

  - by Rob Hays

  I'm currently going to college for computer science. Although I do plan on utilizing an existing engine at some point to create a small game, my aim right now is towards learning the fundamentals: namely, 3D programming. I've already done some research regarding the choice between DirectX and OpenGL, and the general sentiment that came out of that was that whether you choose OpenGL or DirectX as your training-wheels platform, a lot of the knowledge is transferrable to the other platform. Therefore, since OpenGL is supported by more systems (probably a silly reason to choose what to learn), I decided that I'm going to learn OpenGL first. After I made this decision to learn OpenGL, I did some more research and found out about a dichotomy that I was somewhere unaware of all this time: fixed-function OpenGL vs. modern programmable shader-based OpenGL. At first, I thought it was an obvious choice that I should choose to learn shader-based OpenGL since that's what's most commonly used in the industry today. However, I then stumbled upon the very popular Learning Modern 3D Graphics Programming by Jason L. McKesson, located here: http://www.arcsynthesis.org/gltut/ I read through the introductory bits, and in the "About This Book" section, the author states: "First, much of what is learned with this approach must be inevitably abandoned when the user encounters a graphics problem that must be solved with programmability. Programmability wipes out almost all of the fixed function pipeline, so the knowledge does not easily transfer." yet at the same time also makes the case that fixed-functionality provides an easier, more immediate learning curve for beginners by stating: "It is generally considered easiest to teach neophyte graphics programmers using the fixed function pipeline." Naturally, you can see why I might be conflicted about which paradigm to learn: Do I spend a lot of time learning (and then later unlearning) the ways of fixed-functionality, or do I choose to start out with shaders? My primary concern is that modern programmable shaders somehow require the programmer to already understand the fixed-function pipeline, but I doubt that's the case. TL;DR == As an aspiring game graphics programmer, is it in my best interest to learn 3D programming through fixed-functionality or modern shader-based programming?

  Read the article

• USB mass storage couldn't get mounted

  - by revo

  It's my android phone SD card which was indicated damaged by android yesterday night, out of the blue! I put it directly to a USB port with a USB SD card holder case, so in that way I can recover it with TestDisk, which I had experienced before on a similar situation. I also noticed that there is a change in file system and capacity: File System : RAW Capacity : 0 (unknown capacity) Also TestDisk doesn't show it on its partitions list. A 2 GB SD card is not that important in price but I've a lot of files and medias which I need them. Used a mini card reader, TestDisk displayed it on its list but a quick search and or a deep search doesn't have any results No partition found or selected for recovery and then I should quit the program. Your help is appreciated. Update #2 lsusb output: Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 002: ID 04f3:0234 Elan Microelectronics Corp. Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 058f:6366 Alcor Micro Corp. Multi Flash Reader Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 009 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 007 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 006 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

  Read the article

• How can I replicate the look and limitations of the Super NES?

  - by Mikalichov

  I am looking to produce graphics with the same limitations / look that in the Super Nes era. I am specifically looking for graphics similar to Chrono Trigger / FF6. It would be a lot easier to do if I had an idea of the resolution / dpi I am supposed to use. I found that the technical specs for the SNES are: Progressive: 256 × 224, 512 × 224, 256 × 239, 512 × 239 Interlaced: 512 × 448, 512 × 478 But even by using these resolutions, it is pointless if I set it at 72dpi, as I will still have possibly very detailed graphics (that is the main thing, I don't want detailed graphics, I want to go pixelated). I figured it might be related to the sprite size limit, i.e.: Sprites can be 8 × 8, 16 × 16, 32 × 32, or 64 × 64 pixels, each using one of eight 16-color palettes and tiles from one of two blocks of 256 in VRAM. Up to 32 sprites and 34 8 × 8 sprite tiles may appear on any one line. This would work for sprites (characters, objects), but what about maps? Are they built entirely from 8x8 tiles? And then, at what resolution is the end result displayed? It might seem like I am giving the question and answers at the same time, but all of these are suppositions I am making, so could someone confirm or correct them?

  Read the article

• How can I get my monitor's maximum resolution without the proprietary AMD graphic driver installed?

  - by Venki

  I am using Ubuntu 14.04. I have an AMD Radeon 5570 HD graphic card. Actually, the default open source REDWOOD drivers aren't allowing me to choose my monitor's maximum screen resolution(which is 1366 x 768). I just have two resolutions displayed which are 1024x768 and 800x600 . If I give the command : xrandr -s 1366x768 then the output is: Size 1366x768 not found in available modes So just for the sake of getting 1366x768 resolution I am forced to install the proprietary graphic driver that AMD gives me from its site. But if I install it(which itself is quite a problem-prone process), I undergo a lot of 'inconvenience'. Sometimes after an OS update, the driver crashes unity. Then I will have to uninstall that driver from a tty and google around for a solution. Also I encounter screen tearing problems occasionally. In addition I also cant see my login screen(See this question which states this particular problem). The main problem is AMD does not update its driver as quick as Ubuntu updates its OS. This is quite irritating. So, I want the maximum resolution(and performance) that my graphics card and monitor can give me without installing the 'problematic' proprietary graphic card driver that AMD gives. Is this possible? Suggestions please. Thanks in advance. PS :- More system specs details:- Intel i3 2100 processor AMD P8H61-M PLUS2 motherboard AMD Radeon 5570 HD graphic card DELL monitor (BTW, Thank you for reading through my elaborate description!)

  Read the article

• Kubuntu never gets to the login screen

  - by searchfgold6789

  I am not sure if Xorg is using the right device... The system in question is an A4-1400 CPU with built-in Radeon Graphics. I added a PCIe Radeon HD 5750, and changed the BIOS so it would use that card automatically. Now it appears that I can see output from the TV plugged into the HDMI port, and boot into recovery mode, but cannot get to a desktop - X doesn't start. It just freezes at the Kubuntu splash screen. I have no idea how to get X to use the proper graphics card. I pasted the Xorg.log to http://paste.ubuntu.com/6261137/. And the Xorg.conf generated by aticonfig --initial is at http://paste.ubuntu.com/6261161/ Also, see lspci and lshw -c display outputs. I can provide more information, but something does tell me X is not using the right graphics card and I've no idea where to begin how to fix it... I faced a similar issue before with another distribution but found no information anywhere on how to make X use a specific graphics card. Or maybe it's not that simple.

  Read the article

• Day 5 - Tada! My Game Menu Screen Graphics

  - by dapostolov

  So, tonight I took some time to mash up some graphics for my game menu screen. My artistic talent sucks...but here goes nothing...voila, my menu screen!! The Menu Screen The screen above is displaying 4 sprites, even though it looks like maybe 7... I guess one of the first things for me to test in the future is ... is it more memory efficient (and better frame rate) to draw one big background image OR tp paint the screen black, and place each sprite in set locations? To display the 4 sprites above, I borrowed my code from yesterday ... I know, tacky, but...I wanted to see it, feel it. Do you feel it? FEEL IT! (homer voice & shakes fist) Note: the menu items won't scale properly as it stands with this code, well pretty much they do nothing except look pretty... Paint.Net & Google Fun So how did I create that image above? Well, to create the background and 3 menu items I used Paint.Net. Basically, I scoured Google images for: a stone doorway, a stone pillar, an old book, a wizards hat, and...that's it pretty much it! I'll let you type in those searches and see if you can locate the images I used. I know, bad developer...but I figured since I modified the images considerably it doesn't count...well for a personal project it shouldn't count...*shrug* Anyhow, I extracted each key assest I wanted from each image and applied lots of matting, blurring, color changes, glow effects and such. Then, using my vivid imagination I placed / composed each of the layered assets into the mashed up the "scene" above. Pretty cool, eh? Hey, did you know, the cool mist effect is actually a fire rendition in Paint.net? I set it to black & white with opacity set next to nothing. I'm also very proud of the yellow "light" in the stone doorway. I drew that in and then applied gausian blur to it to give it the effect of light creeping out around the door and into the room...heheh. So did I achieve the dark, mysterious ritual as I stated in my design doc? I think I had a great stab at it! Maybe down the road I can get a real artist to crank out some quality graphics for the game... =) So, What's Next? Well, I don't have that animated brazier yet...however, I thought it would be even cooler if I can get that door pulsing that yellow light and it would be extremely cool to have the smoke / mist moving across the screen! Make the creative ideas stop!! (clutches head) haha! I'm having great fun working on this project =) I recommend others giving something like this a try, it's really fulfilling. OK. Tomorrow... I think I'm going to start creating some game / menu objects as per the design doc, maybe even get a custom mouse cursor up on the screen and handle a couple of mouse events, and lastly, maybe a feature to toggle a framerate display... D.

  Read the article

• what is the best mid/high-end class audio/music creation audio sound card?

  - by Chris

  Hello, I have a computershop myself, and I repair computers. But one of the things I really don't know (yet) is the performace od audio cards for music creation with midi. I have searched and searched and came up with some good reviews, but after browsing for a couple of hours I could't see the trees trough the forrest :-D (it's a dutch expression) At one moment I thought the M-Audio - Delta 1010LT would be a good PCIe card, later on I read that this card was released years ago. (but that could be false information) Also any personal expierence would be great, but not necessairy. I have searched a few cards, and I hope someone can help me make a choice for a friend of mine. He's buget is between $100 and $350 I know there are audio cards from $ 500 - $1850,- this is just too expensive. The following specs are crucial: ASIO Midi Mic in minimal 5.1, 7.1 recommended it's not for airplay, but just to compose music at home. using Ableton and midi keyboard. 1. M-Audio - Delta 1010LT: 8 x 8 analog I/O 2 mic preamps or line inputs S/PDIF digital I/O (coaxial) with 2-channel PCM SCMS copy protection control digital I/O supports surround-encoded AC-3 and DTS pass-through 1 x 1 MIDI I/O directly drive up to 7.1 surround (bass management software included) software controlled 36-bit internal DSP digital mixing/routing +4dbu/-10dBV operation individually switched in software word clock I/O for sample accurate device synchronization 2. RME HDSP 9632: * Stereo Analog Ein- und Ausgang, symmetrisch*, 24-Bit/192kHz, > 110 dB SNR * Optionale Erweiterungsboards mit je 4 symmetrischen Ein- und Ausgängen * Alle analogen I/Os voll 192 kHz-fähig, also keine Reduzierung der Kanalzahl * 1 x ADAT Digital In/Out, 96 kHz-fähig (S/MUX) * 1 x SPDIF Digital In/Out, 192 kHz-fähig * 1 x Breakout Kabel für koaxialen SPDIF-Betrieb* * Also bis zu 16 Ein-und Ausgänge gleichzeitig nutzbar! * 1 x Stereo Kopfhörerausgang, parallel zum analogen Ausgang, aber eigene Pegelanpassung * 1 x MIDI I/O für 16 Kanäle Hi-Speed MIDI über Breakout Kabel * DIGICheck, RMEs einzigartiges Meter- und Analysetool mit Spectral Analyser, Professionelle Level Meter 2/8/16-Kanalig, Vector Audio Scope und diversen weiteren Analysefunktionen * HDSP Meter Bridge: Frei skalierbare Levelmeter mit Peak- und RMS Berechnung in Hardware * TotalMix: 512-Kanal Mischer mit 40 Bit interner Auflösung 3. EMU 1212M (1212 M) PCIe: * Top kwaliteit convertors 24-bit/192kHz convertors. * Hardware gestuurde effecten. * DSP zero-latency hardware mixen en monitoring. * Analoge en digitale I/O plus MIDI. * EMU Production Tools Software Bundle - Cakewalk SONAR , Steinberg Cubase LE, Ableton Live E-MU Edition **EMU 1212M PCI-e inputs/outputs:** * 2 balanced jack inputs. * 2 balanced jack outputs. * 24-bit/192kHz ADAT I/O. * 24-bit/192kHz Coaxiale S/PDif I/O switchable to AES/EBU. * MIDI I/O. 4. M-Audio Audiophile 192: - Up to 24-bit/192kHz audio - 2 balanced analog inputs (1/4” TRS) - 2 balanced analog outputs (1/4” TRS) - S/PDIF digital I/O (coaxial RCA connectors) with 2-channel PCM - SCMS copy protection control - Digital I/O supports surround-encoded AC-3 and DTS pass-through - Direct hardware input monitoring via separate balanced 1/4” TRS monitor outputs - Software routing of inputs and outputs - Digital I/O can be routed to/from external effects - 16-channel MIDI I/O - ASIO, WDM, GSIF 2 and Core Audio driver support for compatibility with most applications - 64-bit driver support for Windows - PCI 2.2 compatibility - Apple G5 compatible - Incompatible exceptions - Includes Ableton Live Lite music production software, so you can make music right away - Works with other Delta cards Technical Specifcations: - Compatibility - ASIO - WDM - GSIF 2 - Core Audio

  Read the article

• Mount "locked" SD card as read-write in GNU/Linux

  - by Vi

  My Canon PowerShot A470 + CHDK can write to SD-cards that are "locked" (the lock switch is used to make the card bootable), but GNU/Linux `/dev/mmcblk1': Read-only file system (I'm using "Texas Instrument 5-in-1 Multimedia Card Reader") So I have to switch that switch on and off again and again. ("unlocked" to write to the card in Linux, "locked" to boot the camera from it). How to force locked card to be writable in GNU/Linux?

  Read the article

• Outlook is looking for a smart card

  - by Sreekumar

  Dell computer with Windows 7 and Outlook 2003. I recently added a smart card reader to my computer for the National Guard so that I can access some military sites that require a smart card to log in. Now, every time Outlook attempts to download any mail from my civilian AT&T account (a pop e-mail server), I get a message asking me to "Insert a smart card". I've traced it to the send/receive feature (specifically receiving e-mails) but can find no reason that Outlook should be looking for a smart card.

  Read the article

• Rendering of graphics different depending on DisplayObject position

  - by jedierikb

  When drawing vertical lines with a non-integer x-value (e.g., 1.75) to a sprite, the lines are drawn differently based on the non-integer x-value of the sprite. In the picture below are two pairs of very close together vertical lines. As you can see, they look very different. This is frustrating, especially when animating the sprite. Any ideas how ensure that sprites-with-non-integer-positions' graphics will visually display the same way regardless of the sprite position? package { import flash.display.Sprite; import flash.display.StageAlign; import flash.display.StageScaleMode; import flash.events.Event; public class tmp extends Sprite { private var _sp1:Sprite; private var _sp2:Sprite; public function tmp( ):void { stage.align = StageAlign.TOP_LEFT; stage.scaleMode = StageScaleMode.NO_SCALE; _sp1 = new Sprite( ); drawButt( _sp1 ); _sp1.x = 100; _sp1.y = 100; _sp2 = new Sprite( ); drawButt( _sp2 ); _sp2.x = 100; _sp2.y = 200; addChild( _sp1 ); addChild( _sp2 ); addEventListener( Event.ENTER_FRAME, efCb, false, 0, true ); } private function efCb( evt:Event ):void { var nx:Number = _sp2.x + .1; if (nx > 400) { nx = 100; } _sp2.x = nx; } private function drawButt( sp:Sprite ):void { sp.graphics.clear( ); sp.graphics.lineStyle( 1, 0, 1, true ); sp.graphics.moveTo( 1, 1 ); sp.graphics.lineTo( 1, 100 ); sp.graphics.lineStyle( 1, 0, 1, true ); sp.graphics.moveTo( 1.75, 1 ); sp.graphics.lineTo( 1.75, 100 ); } } }

  Read the article

• Why doesn't my sound card start? It reports code 10.

  - by Sarim Ali

  When I installed the XP for first time my sound card was working fine. But only after the first reboot it has stopped working. Under Device Manager, the section "sound video and game controller" the entry YAMAHA Native DS1 WDM Driver, has a exclamation mark on it. On left clicking and selecting properties it shows this message "This device cannot start. (Code 10)". On trying to update driver it says a better driver can not be found. Any idea how I can solve the issue? Update: As suggested by harrymc I uninstalled the device "YAMAHA Native DS1 WDM Driver" , and scanned for hardware changes. The windows detected and installed the soundcard and it started working properly.BUT, after restarting the same problem occurs. So, now everytime I reboot the computer I am stuck to, repeating the process of uninstalling the device to make it work.

  Read the article

• Are these symptoms of a video card is dying?

  - by K Cloud

  What I am getting from my PC: Scrambled text in the boot menu. The scrambled text dissapears and everthing goes normal after several restarts, or the computer has worked for some time. Display goes blank showing, windows kernel mode driver stopped responding. Sometimes the windows just hangs, I need to restart the pc for that. There used to be some scrambled colors in my windows, so I cleaned up my video carda and port and reinstalled the video card, things are something right. The pc runs normally for hours in safe mode, as diffault display driver works at that case. My PC specs: Core 2 Duo processor 2 GB RAM NVIDIA EN210 SILENT GPU Windows 8 Drivers details: NVIDIA drivers - v331.65, told to be fully compatible with Win8 Currently I am installing Windows 7 and will be putting the older version of driver v320 to test, yet I'm really confused weather my GPU is dying or still on go.

  Read the article

• why PaintComponent event in Java happen everytime I use its Graphics Event?

  - by Pooya

  Consider this code: public class StateChartPanel extends JPanel { private LightContext LC; public StateChartPanel(LightContext lc){ LC=lc; } public void paintComponent( Graphics G ){ super.paintComponent( G ); LC.DrawStateChart((Graphics2D)G); } } StateChartPanel is a panel to draw something (a state chart). It sends its Graphics object to LC which use it to draw shapes but whenever it draws something the PaintComponent event of StateChartPanel happens again and it causes my application to hang.

  Read the article

• Ubuntu 12.10 - Graphics driver shows Gallium 0.4 instead of intel HD

  - by nlooije

  I have a hybrid Intel/Nvidia system using bumblebee on Ubuntu 12.10 with specs: Clevo W150HR, SB i7-2720qm, 8GB RAM, 128GB Crucial M4 SSD + 500GB HDD It is reported to use software rendering (through Gallium driver) rather than accelerated through the intel HD driver. Reinstalling the intel driver has no effect: sudo apt-get install --reinstall xserver-xorg-video-intel The result is a rather sluggish desktop. Is there any way to blacklist the gallium driver? Or force the intel driver instead? Edit 1 - Ubuntu 12.04 shows the driver as Intel SandyBridge out of the box, but 12.10 does not even after running the above command. Edit 2 - Xorg.0.log shows: (--) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT1) (WW) intel(0): Disabling hardware acceleration on this pre-production hardware. Edit 3 - It turns out that SandyBridge rev.7 systems are known to be unstable per this link. Accordingly in the xserver-xorg-video-intel if it detects this rev. it disables it with the warning in above log.

  Read the article

• Often "running in low-graphics mode” with NVidia GeForce GT 430

  - by user42228

  Often (every fifth time perhaps) when I turn on my system, I'm greeted with the "running in low-graphics mode” window. Sometimes all I have to do is reboot and the system will start correctly, sometimes there can be a longer series of failed starts. If I go to the terminal and log in, I can run startx and my desktop will appear without problems. At the end of /var/log/Xorg.1.log I see this: [ 77.459] (EE) Screen(s) found, but none have a usable configuration. [ 77.459] Fatal server error: [ 77.459] no screens found [ 77.459] Please consult the The X.Org Foundation support at http://wiki.x.org Is the NVidia creating the appropriate XOrg configuration dynamically on every boot, or what could explain that the configuration error above only occurs sometimes?

  Read the article

• iPhone image asset recommended resolution/dpi/format

  - by Matthew

  I'm learning iPhone development and a friend will be doing the graphics/animation. I'll be using cocos2d most likely (if that matters). My friend wants to get started on the graphics, and I don't know what image resolution or dpi or formats are recommended. This probably depends on if something is a background vs. a small character. Also, I know I read something about using @2x in image file names to support high res iphone screens. Does cocos2d prefer a different way? Or is this not something to worry about at this point? What should I know before they start working on the graphics?

  Read the article

• Absolutely Nothing Apearing in "Additional Drivers"

  - by Joshua Arroyo

  OK so I just got Ubuntu the other month or so. I'm running the 11.04 version currently and trying to install drivers for a Nvidia graphics card (it's my brother's computer and he currently cannot find the number of the card right now). I read that, to install the proper drivers for gaming, I would need to go into "Additional Drivers" and choose them myself. I clicked to go into "Additional Drivers" and it searched "for available drivers", then opened the additional drivers list. Lo and Behold, there was nothing, simply the message "No proprietary drivers are in use on this system" and the Help and Close buttons. Sorry if there's some silly simple answer to all of this, I'm new to this sort of thing (used to Windows simplicity, lol) and I really don't know what to do. Help would be much appreciated. Also, I should mention that the graphics card was installed and ran fine before switching from Windows XP to Ubuntu.

  Read the article

• Rebooting problem

  - by Vinoth

  After restarting my ubuntu PC, I am getting a dialog window showing "Your system is running in low graphics mode" and after clicking on 'OK', I was prompted with three options 1. Run in low graphics mode for just one session 2. Reconfigure graphics 3. Troubleshoot the error 4. Exit to console login When I troubleshoot the error, its showing the black screen with following lines which I remember: we do not own /var/log/pm-powersave.log ....................................... couldn't write bytes: Broken pipe ....................................... ....................................... Starting System V runlevel compatibility got strucked at this point. Actually before restarting, I have changed the owner for all the files under the directory "/var/log" and "/var/lib". Is there any relation with the above issue. Please help me out to resolve the issue. Its urgent.

  Read the article

• How to Install Nvidia Drivers

  - by Richard Rodriguez

  I just ordered the Nvidia GTX 560 card, which should arrive tomorrow. I have a dilemma, though. Should I keep using the driver which is available in "additional drivers" in Ubuntu (10.10), or should I install the driver from the nvidia site? NOTE - The methods to install explained here apply to all Nvidia, Ati & Intel video cards The latest driver available at the nvidia site: LINUX X64 (AMD64/EM64T) DISPLAY DRIVER Version: 280.13 Certified Release Date: 2011.08.01 Operating System: Linux 64-bit Language: English (U.S.) File Size: 52.4 MB I should point out that I don't need the card to unleash its full potential in Ubuntu (I have Windows for gaming, other HDD), I just need it to work properly, that meaning the power saving should work (I don't want the card to overheat for no reason), also I would like the fans to work at proper speeds, etc. So which driver is the best for me?

  Read the article

• Split screen and other issues on Ubuntu 11.10 with ATI graphics card

  - by garus

  Ever since updating my Ubuntu 11.04 to 11.10 I experience issues with graphics. The biggest is the "split screen" effect where my desktop is shifted to the right, resulting in having Unity bar in the middle of the screen. As shown here: http://i.imgur.com/I8nmZ.jpg This changes from boot to boot, sometimes it's on the left, sometimes in the middle. What I tried: Removing fglrx drivers completely Installing post-update version of them, but installation is broken ATM in the Ubuntu, so no go. No one is even trying to fix it (bug report https://bugs.launchpad.net/ubuntu/+source/nvidia-common/+bug/873058 and a couple of duplicates out there) Also using the open source "radeon" driver results in the same (I have a better successful boot ratio with this one, proprietary rarely lets me boot) Other artifacts are: serious screen tearing weird lines flickering in random places lagginess Did anyone experience that? My specs: Ubuntu 11.10 AMD Radeon HD 6950 1GB

  Read the article

• unmet dependencies updating Intel graphics driver

  - by Nick Jacobs

  I am trying to update my graphics driver by running: sudo apt-get install xserver-xorg-video-intel But I keep getting this message: Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: xserver-xorg-video-intel : Depends: xorg-video-abi-11 E: Unable to correct problems, you have held broken packages. When I run: sudo apt-get install -f Nothing happens, because the program doesn't even get half way to installing. I am running Lubuntu 12.04 on a HP Mini 110 netbook. I have tried changing to several different ppa's but that doesn't work. I want to update my driver so that my mouse stops flickering and ScummVM stops flickering every minute.

  Read the article

• After reinstalling ATI graphics drivers, my keyboard and mous aren't working anymore

  - by Lifelike27

  On Ubuntu 11.04 I tried to install the open source drivers for my laptops ATI Mobility Radeon 5470M but I messed that up a bit and lost xserver. Now I've managed to solve that problem with this and by downloading the ATI proprietary drivers and install those manually. Now, when Ubuntu loads up I get to the login screen but I can't use my mouse or my keyboard (usb keyboard and mouse doesn't work either). If I use the recovery console, then login with that and then run 'startx'. I can login fine (though Unity doesn't show, the graphics seem to be working because it shows the fading animation of libnotify), but I can't type or move my mouse.

  Read the article

• "The system is running in low graphics mode", unable to connect to the Internet

  - by Blah

  When I try to log onto Ubuntu, I get a notice that reads: The system is running in low graphics mode. I searched for a solution and there are a slew of answers. However, many of them seem to suggest reinstalling different things. After pressing Ctrl+Alt+F1 and getting to a terminal, I attempt commands like sudo apt-get install example. Upon doing so I get notices that say things such as could not resolve host which I am assuming means I'm not connected to the Internet. Since I can not connect to the Internet, none of these responses are helpful to me. What can I do?

  Read the article

< Previous Page | 28 29 30 31 32 33 34 35 36 37 38 39  | Next Page >