Search Results

Search found 817 results on 33 pages for 'ipv6'.

Page 32/33 | < Previous Page | 28 29 30 31 32 33  | Next Page >

• CentOS - Add additional hard drive raid arrays on Dell Perc 5/i card

  - by Quanano

  We have a Dell Poweredge 2900 system with Dell Perc 5/i card and 4 SAS hard drives attached, with NTFS partitions on them. We installed CentOS on one raid array on this controller with a different controller and it is working fine. We are now trying to access the drives shown above and they are not being shown in /dev as sdb, etc. sda is the drive that we installed centos on and it has sda1, sda2, sda3, etc. The CDROM has been picked up as well. If I scan for scsi devices then the perc and adaptec controllers are both found. sg0 is the CDROM and sg2 is the centos installed, however I think sg1 is the other drive but I cannot see anyway to mount the partitions, as only the drive is listed in /dev. Thanks. EXTRA INFO fdisk -l: Disk /dev/sda: 72.7 GB, 72746008576 bytes 255 heads, 63 sectors/track, 8844 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x11e3119f Device Boot Start End Blocks Id System /dev/sda1 * 1 64 512000 83 Linux Partition 1 does not end on cylinder boundary. /dev/sda2 64 8845 70528000 8e Linux LVM Disk /dev/mapper/vg_lal2server-lv_root: 34.4 GB, 34431041536 bytes 255 heads, 63 sectors/track, 4186 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/vg_lal2server-lv_root doesn't contain a valid partition table Disk /dev/mapper/vg_lal2server-lv_swap: 21.1 GB, 21139292160 bytes 255 heads, 63 sectors/track, 2570 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/vg_lal2server-lv_swap doesn't contain a valid partition table Disk /dev/mapper/vg_lal2server-lv_home: 16.6 GB, 16647192576 bytes 255 heads, 63 sectors/track, 2023 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/vg_lal2server-lv_home doesn't contain a valid partition table These are all from the install hdd not the additional hard drives modprobe a320raid FATAL: Module a320raid not found. lsscsi -v: [0:0:0:0] cd/dvd TSSTcorp CDRWDVD TS-H492C DE02 /dev/sr0 dir: /sys/bus/scsi/devices/0:0:0:0 [/sys/devices/pci0000:00/0000:00:1f.1/host0/target0:0:0/0:0:0:0] [4:0:10:0] enclosu DP BACKPLANE 1.05 - dir: /sys/bus/scsi/devices/4:0:10:0 [/sys/devices/pci0000:00/0000:00:05.0/0000:01:00.0/0000:02:0e.0/host4/target4:0:10/4:0:10:0] [4:2:0:0] disk DELL PERC 5/i 1.03 /dev/sda dir: /sys/bus/scsi/devices/4:2:0:0 [/sys/devices/pci0000:00/0000:00:05.0/0000:01:00.0/0000:02:0e.0/host4/target4:2:0/4:2:0:0] . lsmod: Module Size Used by fuse 66285 0 des_generic 16604 0 ecb 2209 0 md4 3461 0 nls_utf8 1455 0 cifs 278370 0 autofs4 26888 4 ipt_REJECT 2383 0 ip6t_REJECT 4628 2 nf_conntrack_ipv6 8748 2 nf_defrag_ipv6 12182 1 nf_conntrack_ipv6 xt_state 1492 2 nf_conntrack 79453 2 nf_conntrack_ipv6,xt_state ip6table_filter 2889 1 ip6_tables 19458 1 ip6table_filter ipv6 322029 31 ip6t_REJECT,nf_conntrack_ipv6,nf_defrag_ipv6 bnx2 79618 0 ses 6859 0 enclosure 8395 1 ses dcdbas 9219 0 serio_raw 4818 0 sg 30124 0 iTCO_wdt 13662 0 iTCO_vendor_support 3088 1 iTCO_wdt i5000_edac 8867 0 edac_core 46773 3 i5000_edac i5k_amb 5105 0 shpchp 33482 0 ext4 364410 3 mbcache 8144 1 ext4 jbd2 88738 1 ext4 sd_mod 39488 3 crc_t10dif 1541 1 sd_mod sr_mod 16228 0 cdrom 39771 1 sr_mod megaraid_sas 77090 2 aic79xx 129492 0 scsi_transport_spi 26151 1 aic79xx pata_acpi 3701 0 ata_generic 3837 0 ata_piix 22846 0 radeon 1023359 1 ttm 70328 1 radeon drm_kms_helper 33236 1 radeon drm 230675 3 radeon,ttm,drm_kms_helper i2c_algo_bit 5762 1 radeon i2c_core 31276 4 radeon,drm_kms_helper,drm,i2c_algo_bit dm_mirror 14101 0 dm_region_hash 12170 1 dm_mirror dm_log 10122 2 dm_mirror,dm_region_hash dm_mod 81500 11 dm_mirror,dm_log blkid: /dev/sda1: UUID="bc4777d9-ae2c-4c58-96ea-cedb342b8338" TYPE="ext4" /dev/sda2: UUID="j2wRZr-Mlko-QWBR-BndC-V2uN-vdhO-iKCuYu" TYPE="LVM2_member" /dev/mapper/vg_lal2server-lv_root: UUID="9238208a-1daf-4c3c-aa9b-469f0387ebee" TYPE="ext4" /dev/mapper/vg_lal2server-lv_swap: UUID="dbefb39c-5871-4bc9-b767-1ef18f12bd3d" TYPE="swap" /dev/mapper/vg_lal2server-lv_home: UUID="ec698993-08b7-443e-84f0-9f9cb31c5da8" TYPE="ext4" dmesg shows: megaraid_sas: fw state:c0000000 megasas: fwstate:c0000000, dis_OCR=0 scsi2 : LSI SAS based MegaRAID driver scsi 2:0:0:0: Direct-Access SEAGATE ST3146855SS S527 PQ: 0 ANSI: 5 scsi 2:0:1:0: Direct-Access SEAGATE ST3146855SS S527 PQ: 0 ANSI: 5 scsi 2:0:2:0: Direct-Access SEAGATE ST3146855SS S527 PQ: 0 ANSI: 5 scsi 2:0:3:0: Direct-Access SEAGATE ST3146855SS S527 PQ: 0 ANSI: 5 scsi 2:0:4:0: Direct-Access HITACHI HUS154545VLS300 D590 PQ: 0 ANSI: 5 scsi 2:0:5:0: Direct-Access HITACHI HUS154545VLS300 D590 PQ: 0 ANSI: 5 scsi 2:0:8:0: Direct-Access FUJITSU MBA3073RC D305 PQ: 0 ANSI: 5 scsi 2:0:9:0: Direct-Access FUJITSU MBA3073RC D305 PQ: 0 ANSI: 5 i.e. the 3 RAID Arrays Seagate Hitatchi and Fujitsu hard drives respectively. FURTHER UPDATE I have installed the megaraid storage manager console and connected to the server. It appears that the two CentOS installation hard drives are OK. The other 6 drives, one raid array of 4 and one raid array of 2 disks. The other drives are listed as (Foreign) Unconfigured Good.

  Read the article

• Nginx no static files after update

  - by SomeoneS

  First, i must say that i am not expert in server administration, my site was setup by hosting admins (that i cannot contact anymore). Few days ago, i updated Nginx to latest version (admin told me that it is safe to do). But after that, my site serves only html content, no CSS, images, JS. If i try to open some image i get message "Wellcome to Nginx" (same thin if i try to open static.mysitedomain.com). More details: Site has static. subdomain, but static files are in same directory as they used to be before setting up static files. I was googling for some solutions, i tried to change something in /etc/nginx/, but no luck. I feel that this is some minor configuration problem, any ideas? EDIT: Here is /etc/nginx/nginx.conf file content: user www-data; worker_processes 4; pid /var/run/nginx.pid; events { worker_connections 768; # multi_accept on; } http { ## # Basic Settings ## sendfile on; tcp_nopush on; tcp_nodelay on; keepalive_timeout 65; types_hash_max_size 2048; # server_tokens off; # server_names_hash_bucket_size 64; # server_name_in_redirect off; include /etc/nginx/mime.types; default_type application/octet-stream; ## # Logging Settings ## access_log /var/log/nginx/access.log; error_log /var/log/nginx/error.log; ## # Gzip Settings ## gzip on; gzip_disable "msie6"; # gzip_vary on; # gzip_proxied any; # gzip_comp_level 6; # gzip_buffers 16 8k; # gzip_http_version 1.1; # gzip_types text/plain text/css application/json application/x-javascript text/xml application/xml application/xml+rss text/javascript; ## # nginx-naxsi config ## # Uncomment it if you installed nginx-naxsi ## #include /etc/nginx/naxsi_core.rules; ## # nginx-passenger config ## # Uncomment it if you installed nginx-passenger ## #passenger_root /usr; #passenger_ruby /usr/bin/ruby; ## # Virtual Host Configs ## include /etc/nginx/conf.d/*.conf; include /etc/nginx/sites-enabled/*; } Here is /etc/nginx/sites-enabled/default file content: server { #listen 80; ## listen for ipv4; this line is default and implied #listen [::]:80 default ipv6only=on; ## listen for ipv6 root /usr/share/nginx/www; index index.html index.htm; # Make site accessible from http://localhost/ server_name localhost; location / { # First attempt to serve request as file, then # as directory, then fall back to index.html try_files $uri $uri/ /index.html; # Uncomment to enable naxsi on this location # include /etc/nginx/naxsi.rules } location /doc/ { alias /usr/share/doc/; autoindex on; allow 127.0.0.1; deny all; } # Only for nginx-naxsi : process denied requests #location /RequestDenied { # For example, return an error code #return 418; #} #error_page 404 /404.html; # redirect server error pages to the static page /50x.html # #error_page 500 502 503 504 /50x.html; #location = /50x.html { # root /usr/share/nginx/www; #} # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000 # #location ~ \.php$ { # fastcgi_split_path_info ^(.+\.php)(/.+)$; # # NOTE: You should have "cgi.fix_pathinfo = 0;" in php.ini # # # With php5-cgi alone: # fastcgi_pass 127.0.0.1:9000; # # With php5-fpm: # fastcgi_pass unix:/var/run/php5-fpm.sock; # fastcgi_index index.php; # include fastcgi_params; #} # deny access to .htaccess files, if Apache's document root # concurs with nginx's one # #location ~ /\.ht { # deny all; #} } # another virtual host using mix of IP-, name-, and port-based configuration # #server { # listen 8000; # listen somename:8080; # server_name somename alias another.alias; # root html; # index index.html index.htm; # # location / { # try_files $uri $uri/ /index.html; # } #} # HTTPS server # #server { # listen 443; # server_name localhost; # # root html; # index index.html index.htm; # # ssl on; # ssl_certificate cert.pem; # ssl_certificate_key cert.key; # # ssl_session_timeout 5m; # # ssl_protocols SSLv3 TLSv1; # ssl_ciphers ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv3:+EXP; # ssl_prefer_server_ciphers on; # # location / { # try_files $uri $uri/ /index.html; # } #}

  Read the article

• Permission forbidden on localhost with apache2

  - by N Alex

  Here is what I am trying to do. I tried to add another folder to apache and I get the following error when trying to acces testing/index.html. The idea is that I would like to have for every customer a folder like /home/neagoe/Work/InterWebs/Projects/[PROJECT NAME]/CustomerProjects/website/dist. Forbidden You don't have permission to access /index.html on this server. Apache/2.2.22 (Ubuntu) Server at testing Port 80 Here are the steps that I followed: Step1: sudo chmod a+x /home/neagoe/Work/InterWebs/Projects/testing/CustomerProjects/website/dist Step2: sudo chown -R www-data:www-data /home/neagoe/Work/InterWebs/Projects/testing/CustomerProjects/website/dist sudo chmod -R 775 /home/neagoe/Work/InterWebs/Projects/testing/CustomerProjects/website/dist Step3: sudo adduser $USER www-data Step4: sudo a2enmod userdir Step5: sudo cp /etc/apache/sites-available/default /etc/apache/sites-available/testing I edited the file /etc/apache/sites-available/testing so it looks like this: <VirtualHost *:80> ServerAdmin webmaster@localhost ServerName testing DocumentRoot /home/neagoe/Work/InterWebs/Projects/testing/CustomerProjects/website/dist <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /home/neagoe/Work/InterWebs/Projects/testing/CustomerProjects/website/dist/ > Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog ${APACHE_LOG_DIR}/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog ${APACHE_LOG_DIR}/access.log combined </VirtualHost> Step6: I edited hosts ("/etc/hosts") so it looks like this: 127.0.0.1 localhost 127.0.0.1 testing # The following lines are desirable for IPv6 capable hosts ::1 ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters Step7: sudo a2ensite testing sudo service apache2 restart I searched for about 2 hours on the internet but I can't figure out what went wrong. All the pages that I found following the same steps as described above. I know there are similar questions here on the internet, but the answer is to change permission to the directory which I did on Step2. I am sorry if this is really a duplicate but I could't find the right answer. Thank you! PS. I asked this also on AskUbuntu but didn't get any answers so I'm trying my luck here. Edit: There isn't much on the error log or the access log. On the access.log: ::1 - - [10/Aug/2013:11:23:28 +0300] "OPTIONS * HTTP/1.0" 200 126 "-" "Apache/2.2.22 (Ubuntu) (internal dummy connection)" ::1 - - [10/Aug/2013:11:23:29 +0300] "OPTIONS * HTTP/1.0" 200 126 "-" "Apache/2.2.22 (Ubuntu) (internal dummy connection)" ::1 - - [10/Aug/2013:11:23:31 +0300] "OPTIONS * HTTP/1.0" 200 126 "-" "Apache/2.2.22 (Ubuntu) (internal dummy connection)" ::1 - - [10/Aug/2013:11:23:32 +0300] "OPTIONS * HTTP/1.0" 200 126 "-" "Apache/2.2.22 (Ubuntu) (internal dummy connection)" ::1 - - [10/Aug/2013:11:23:33 +0300] "OPTIONS * HTTP/1.0" 200 126 "-" "Apache/2.2.22 (Ubuntu) (internal dummy connection)" ::1 - - [10/Aug/2013:11:23:34 +0300] "OPTIONS * HTTP/1.0" 200 126 "-" "Apache/2.2.22 (Ubuntu) (internal dummy connection)" ::1 - - [10/Aug/2013:11:23:35 +0300] "OPTIONS * HTTP/1.0" 200 126 "-" "Apache/2.2.22 (Ubuntu) (internal dummy connection)" 127.0.0.1 - - [10/Aug/2013:11:23:23 +0300] "POST /wordpress-testing/wp-cron.php?doing_wp_cron=1376123003.7026669979095458984375 HTTP/1.0" 200 705 "-" "WordPress/3.6; http://localhost/wordpress-testing" ::1 - - [10/Aug/2013:11:23:36 +0300] "OPTIONS * HTTP/1.0" 200 126 "-" "Apache/2.2.22 (Ubuntu) (internal dummy connection)" ::1 - - [10/Aug/2013:11:23:37 +0300] "OPTIONS * HTTP/1.0" 200 126 "-" "Apache/2.2.22 (Ubuntu) (internal dummy connection)" ::1 - - [10/Aug/2013:11:23:38 +0300] "OPTIONS * HTTP/1.0" 200 126 "-" "Apache/2.2.22 (Ubuntu) (internal dummy connection)" 127.0.0.1 - - [10/Aug/2013:11:31:32 +0300] "GET /index.html HTTP/1.1" 200 485 "-" "Mozilla/5.0 (X11; Ubuntu; Linux x86_64; rv:23.0) Gecko/20100101 Firefox/23.0" And the last line repeats for about 200 rows. On the error.log: 1. This lines repeat from time to time. PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php5/20100525 /msql.so' - /usr/lib/php5/20100525/msql.so: cannot open shared object file: No such file or directory in Unknown on line 0 [Sat Aug 10 13:06:42 2013] [notice] Apache/2.2.22 (Ubuntu) PHP/5.4.9-4ubuntu2.2 configured -- resuming normal operations [Sat Aug 10 13:07:36 2013] [notice] caught SIGTERM, shutting down PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php5/20100525/msql.so' - /usr/lib/php5/20100525/msql.so: cannot open shared object file: No such file or directory in Unknown on line 0 [Sat Aug 10 13:07:37 2013] [notice] Apache/2.2.22 (Ubuntu) PHP/5.4.9-4ubuntu2.2 configured -- resuming normal operations 2. And this is the predominant error. (hundreds of lines) [Sat Aug 10 13:07:40 2013] [error] [client 127.0.0.1] (13)Permission denied: access to /index.html denied

  Read the article

• DDNS Not Creating Journal (Dhcpd and Named)

  - by user130094

  * EDIT 1 * After monkeying with additional debug logging I see some log entries of interest. 27-Jul-2012 23:45:26.537 general: error: zone example.lan/IN/internal: journal rollforward failed: no more 27-Jul-2012 23:45:26.537 general: error: zone example.lan/IN/internal: not loaded due to errors. ^^^ If I can remedy the above messages I think I'll be good to go ^^^ * EDIT 2 * Grasping at straws I touched a forward and a reverse zone journal file and restarted named. Boom! Works. Despite documentation stating the files are created automatically and what I have seen before... dunno why but that did the trick. Also re-checked perms on the dir the files live in. As certain as I was, they were correct with named having rw. CentOS 6 (final) dhcpd 4.1.1-P1 named BIND 9.8.2rc1-RedHat-9.8.2-0.10.rc1.el6 Basic DHCP and DNS functionality are in place on 192.168.111.2. Clients are assigned addresses as intended and can resolve local DNS names as well as Internet names. My problem is that named's zone journal files are not created. chroot: /var/named/chroot I tried placing the zone files in various directories (/var/named/data, /var/named, /var/named/dynamic - no matter which dir with named owning and wide open perms I now get nowhere). Along the way I, at one point, got a permission denied when named tried to create the journal. Resolved the issue by: chown --recursive named:named /var/named chmod --recursive 777 /var/named The journal was then created and here's where things fell apart. I attempted to tame permissions to something more sane and broke it. Once changed and having restarted named it threw an error indicating the journal was out of sync (or something to that affect)... didn't matter since this is a new setup so I deleted it and now it is not recreated. Now though I see no errors in /var/log/messages, my chrooted /var/log/named.log, or chrooted /var/log/named.debug. I increased the debug level with 'rndc trace' - no love. Increased trace to 10, still nothing. SELinux is disabled... [root@server temp]# sestatus SELinux status: disabled dhcpd.conf... allow client-updates; ddns-update-style interim; subnet 192.168.111.0 netmask 255.255.255.224 { ... key dhcpudpate { algorithm hmac-md5; secret LDJMdPdEZED+/nN/AGO9ZA==; } zone example.lan. { primary 192.168.111.2; key dhcpudpate; } } named.conf... key dhcpudpate { algorithm hmac-md5; secret "LDJMdPdEZED+/nN/AGO9ZA=="; }; zone "example.lan" { type master; file "/var/named/dynamic/example.lan.db"; allow-transfer { none; }; allow-update { key dhcpudpate; }; notify false; check-names ignore; }; The following shows /var/log/named.log output of named starting up - no errors. 27-Jul-2012 21:33:39.349 general: info: zone 111.168.192.in-addr.arpa/IN/internal: loaded serial 2012072601 27-Jul-2012 21:33:39.349 general: info: zone example.lan/IN/internal: loaded serial 2012072501 27-Jul-2012 21:33:39.350 general: info: zone example2.lan/IN/internal: loaded serial 2012072501 27-Jul-2012 21:33:39.350 general: info: zone example3.lan/IN/internal: loaded serial 2012072601 27-Jul-2012 21:33:39.350 general: info: zone example4.lan/IN/internal: loaded serial 2012072501 27-Jul-2012 21:33:39.351 general: info: zone example5.lan/IN/internal: loaded serial 2012072501 27-Jul-2012 21:33:39.351 general: info: managed-keys-zone ./IN/internal: loaded serial 0 27-Jul-2012 21:33:39.351 general: info: zone example.lan/IN/external: loaded serial 2012072501 27-Jul-2012 21:33:39.352 general: info: zone example1.lan/IN/external: loaded serial 2012072501 27-Jul-2012 21:33:39.352 general: info: zone example2.lan/IN/external: loaded serial 2012072501 27-Jul-2012 21:33:39.352 general: info: zone example3.lan/IN/external: loaded serial 2012072501 27-Jul-2012 21:33:39.353 general: info: managed-keys-zone ./IN/external: loaded serial 0 27-Jul-2012 21:33:39.353 general: notice: running 27-Jul-2012 21:34:03.825 general: info: received control channel command 'trace 10' 27-Jul-2012 21:34:03.825 general: info: debug level is now 10 ...and /var/log/messages for a named start... Jul 27 23:02:04 server named[9124]: ---------------------------------------------------- Jul 27 23:02:04 server named[9124]: BIND 9 is maintained by Internet Systems Consortium, Jul 27 23:02:04 server named[9124]: Inc. (ISC), a non-profit 501(c)(3) public-benefit Jul 27 23:02:04 server named[9124]: corporation. Support and training for BIND 9 are Jul 27 23:02:04 server named[9124]: available at https://www.isc.org/support Jul 27 23:02:04 server named[9124]: ---------------------------------------------------- Jul 27 23:02:04 server named[9124]: adjusted limit on open files from 4096 to 1048576 Jul 27 23:02:04 server named[9124]: found 2 CPUs, using 2 worker threads Jul 27 23:02:04 server named[9124]: using up to 4096 sockets Jul 27 23:02:04 server named[9124]: loading configuration from '/etc/named.conf' Jul 27 23:02:04 server named[9124]: using default UDP/IPv4 port range: [1024, 65535] Jul 27 23:02:04 server named[9124]: using default UDP/IPv6 port range: [1024, 65535] Jul 27 23:02:04 server named[9124]: listening on IPv4 interface eth0, 192.168.111.2#53 Jul 27 23:02:04 server named[9124]: generating session key for dynamic DNS Jul 27 23:02:04 server named[9124]: sizing zone task pool based on 12 zones Jul 27 23:02:04 server named[9124]: set up managed keys zone for view internal, file 'dynamic/3bed2cb3a3acf7b6a8ef408420cc682d5520e26976d354254f528c965612054f.mkeys' Jul 27 23:02:04 server named[9124]: set up managed keys zone for view external, file 'dynamic/3c4623849a49a53911c4a3e48d8cead8a1858960bccdea7a1b978d73ec2f06d7.mkeys' Jul 27 23:02:04 server named[9124]: command channel listening on 127.0.0.1#953 What can I do to troubleshoot this further? It almost seems as though dhcpd is not triggering the update. Maybe I should troubleshoot here and, if so, how? Many thanks.

  Read the article

• ldirectord ipvsadm not show reals ip and not work wtih pacemaker and corosync

  - by miguer27

  first thanks for your time. I'm having a problem with ldirectord that I can not solve, I comment my situation: I have two nodes with pace maker and corosync and configure somes resources: root@ldap1:/home/mamartin# crm status Last updated: Tue Jun 3 12:58:30 2014 Last change: Tue Jun 3 12:23:47 2014 via cibadmin on ldap1 Stack: openais Current DC: ldap2 - partition with quorum Version: 1.1.7-ee0730e13d124c3d58f00016c3376a1de5323cff 2 Nodes configured, 2 expected votes 7 Resources configured. Online: [ ldap1 ldap2 ] Resource Group: IPV_LVS IPV_4 (ocf::heartbeat:IPaddr2): Started ldap1 IPV_6 (ocf::heartbeat:IPv6addr): Started ldap1 lvs (ocf::heartbeat:ldirectord): Started ldap1 Clone Set: clon_IPV_lo [IPV_lo] Started: [ ldap2 ] Stopped: [ IPV_lo:1 ] root@ldap1:/home/mamartin# crm configure show node ldap2 \ attributes standby="off" node ldap1 \ attributes standby="off" primitive IPV-lo_4 ocf:heartbeat:IPaddr \ params ip="192.168.1.10" cidr_netmask="32" nic="lo" \ op monitor interval="5s" primitive IPV-lo_6 ocf:heartbeat:IPv6addrLO \ params ipv6addr="[fc00:1::3]" cidr_netmask="64" \ op monitor interval="5s" primitive IPV_4 ocf:heartbeat:IPaddr2 \ params ip="192.168.1.10" nic="eth0" cidr_netmask="25" lvs_support="true" \ op monitor interval="5s" primitive IPV_6 ocf:heartbeat:IPv6addr \ params ipv6addr="[fc00:1::3]" nic="eth0" cidr_netmask="64" \ op monitor interval="5s" primitive lvs ocf:heartbeat:ldirectord \ params configfile="/etc/ldirectord.cf" \ op monitor interval="20" timeout="10" \ meta target-role="Started" group IPV_LVS IPV_4 IPV_6 lvs group IPV_lo IPV-lo_6 IPV-lo_4 clone clon_IPV_lo IPV_lo \ meta interleave="true" target-role="Started" location cli-prefer-IPV_LVS IPV_LVS \ rule $id="cli-prefer-rule-IPV_LVS" inf: #uname eq ldap1 colocation LVS_no_IPV_lo -inf: clon_IPV_lo IPV_LVS property $id="cib-bootstrap-options" \ dc-version="1.1.7-ee0730e13d124c3d58f00016c3376a1de5323cff" \ cluster-infrastructure="openais" \ expected-quorum-votes="2" \ no-quorum-policy="ignore" \ stonith-enabled="false" \ last-lrm-refresh="1401264327" rsc_defaults $id="rsc-options" \ resource-stickiness="1000" The problem is in the ipvsadm only show a one real IP, when i configured two now, show the ldirector.cf: root@ldap1:/home/mamartin# ipvsadm IP Virtual Server version 1.2.1 (size=4096) Prot LocalAddress:Port Scheduler Flags - RemoteAddress:Port Forward Weight ActiveConn InActConn TCP ldap-maqueta.cica.es:ldap wrr - ldap2.cica.es:ldap Route 4 0 0 TCP [[fc00:1::3]]:ldap wrr - [[fc00:1::2]]:ldap Route 4 0 0 root@ldap1:/home/mamartin# cat /etc/ldirectord.cf checktimeout=10 checkinterval=2 autoreload=yes logfile="/var/log/ldirectord.log" quiescent=yes #ipv4 virtual=192.168.1.10:389 real=192.168.1.11:389 gate 4 real=192.168.1.12:389 gate 4 scheduler=wrr protocol=tcp checktype=on #ipv6 virtual6=[[fc00:1::3]]:389 real6=[[fc00:1::1]]:389 gate 4 real6=[[fc00:1::2]]:389 gate 4 scheduler=wrr protocol=tcp checkport=389 checktype=on and in the logs I see nothing clear: root@ldap1:/home/mamartin# ldirectord -d /etc/ldirectord.cf start DEBUG2: Running system(/sbin/ipvsadm -a -t 192.168.1.10:389 -r 192.168.1.11:389 -g -w 0) Running system(/sbin/ipvsadm -a -t 192.168.1.10:389 -r 192.168.1.11:389 -g -w 0) DEBUG2: Quiescent real server: 192.168.1.11:389 (192.168.1.10:389) (Weight set to 0) Quiescent real server: 192.168.1.11:389 (192.168.1.10:389) (Weight set to 0) DEBUG2: Disabled real server=on:tcp:192.168.1.11:389:::4:gate:\/: (virtual=tcp:192.168.1.10:389) DEBUG2: Running system(/sbin/ipvsadm -a -t 192.168.1.10:389 -r 192.168.1.12:389 -g -w 0) Running system(/sbin/ipvsadm -a -t 192.168.1.10:389 -r 192.168.1.12:389 -g -w 0) DEBUG2: Quiescent real server: 192.168.1.12:389 (192.168.1.10:389) (Weight set to 0) Quiescent real server: 192.168.1.12:389 (192.168.1.10:389) (Weight set to 0) DEBUG2: Disabled real server=on:tcp:192.168.1.12:389:::4:gate:\/: (virtual=tcp:192.168.1.10:389) DEBUG2: Checking on: Real servers are added without any checks DEBUG2: Resetting soft failure count: 192.168.1.12:389 (tcp:192.168.1.10:389) Resetting soft failure count: 192.168.1.12:389 (tcp:192.168.1.10:389) DEBUG2: Running system(/sbin/ipvsadm -a -t 192.168.1.10:389 -r 192.168.1.12:389 -g -w 4) Running system(/sbin/ipvsadm -a -t 192.168.1.10:389 -r 192.168.1.12:389 -g -w 4) Destination already exists root@ldap1:/home/mamartin# cat /var/log/ldirectord.log [Tue Jun 3 09:39:29 2014|ldirectord.cf|19266] Quiescent real server: 192.168.1.11:389 (192.168.1.10:389) (Weight set to 0) [Tue Jun 3 09:39:29 2014|ldirectord.cf|19266] Quiescent real server: 192.168.1.12:389 (192.168.1.10:389) (Weight set to 0) [Tue Jun 3 09:39:29 2014|ldirectord.cf|19266] Resetting soft failure count: 192.168.1.12:389 (tcp:192.168.1.10:389) [Tue Jun 3 09:39:29 2014|ldirectord.cf|19266] system(/sbin/ipvsadm -a -t 192.168.1.10:389 -r 192.168.1.12:389 -g -w 4) failed: [Tue Jun 3 09:39:29 2014|ldirectord.cf|19266] Added real server: 192.168.1.12:389 (192.168.1.10:389) (Weight set to 4) [Tue Jun 3 09:39:29 2014|ldirectord.cf|19266] Resetting soft failure count: 192.168.1.11:389 (tcp:192.168.1.10:389) [Tue Jun 3 09:39:29 2014|ldirectord.cf|19266] Restored real server: 192.168.1.11:389 (192.168.1.10:389) (Weight set to 4) [Tue Jun 3 09:39:29 2014|ldirectord.cf|19266] Resetting soft failure count: [[fc00:1::2]]:389 (tcp:[[fc00:1::3]]:389) [Tue Jun 3 09:39:29 2014|ldirectord.cf|19266] system(/sbin/ipvsadm -a -t [[fc00:1::3]]:389 -r [[fc00:1::2]]:389 -g -w 4) failed: [Tue Jun 3 09:39:29 2014|ldirectord.cf|19266] Added real server: [[fc00:1::2]]:389 ([[fc00:1::3]]:389) (Weight set to 4) [Tue Jun 3 09:39:29 2014|ldirectord.cf|19266] Resetting soft failure count: [[fc00:1::1]]:389 (tcp:[[fc00:1::3]]:389) [Tue Jun 3 09:39:29 2014|ldirectord.cf|19266] Restored real server: [[fc00:1::1]]:389 ([[fc00:1::3]]:389) (Weight set to 4) do not know if this is a bug or a configuration error, can anyone help? Regards.

  Read the article

• CodePlex Daily Summary for Sunday, June 26, 2011

  CodePlex Daily Summary for Sunday, June 26, 2011Popular ReleasesDroid Builder: Droid Builder - 1.0.4194.38898: Support new type of patch package. Support plugin framework.Mosaic Project: Mosaic Alpha build 254: - Added horizontal scroll by mouse in fullscreen mode - Widgets now have fixed size - Reduced spacing between widgets - Widgets menu is scrollable by mouse now and not overlapping back button on small screens.Net Image Processor: v1.0: Initial release of the library containing the core architecture and two filters. To install, extract the library to somewhere sensible then reference as a file from your project in Visual Studio.Usage Agent: Usage Agent 9.0.8: Latest release. Changes include: - Fixes for Optus - Usage Delta statistic for BigPond - Eliminated the need for UAC prompt at every startupjQuery List DragSort: jQuery List DragSort 0.4.3: Fix item not dropping correctly on Chrome and jQuery 1.6KinectNUI: Jun 25 Alpha Release: Initial public version. No installer needed, just run the EXE.TerrariViewer: TerrariViewer v3.3 [v1.0.5 Compatible]: I have added support for all the new items in Terraria v1.0.5. I have also added the ability to put your character in hardcore mode or take them out via a simple checkbox on the stats tab. If you come across any bugs, please let me know immediately.Media Companion: MC 3.409b-1 Weekly: This weeks release is part way through a major rewrite of the TVShow code. This means that a few TV related features & functions are not fully operational at the moment. The reason for this release is so that people can see if their particular issue has been fixed during the week. Some issues may not be able to be fully checked due to the ongoing TV code refactoring. So, I would strongly suggest that you put this version into a separate folder, copy your settings folder across & test MC that...Terraria World Viewer: Version 1.5: Update June 24th Made compatible with the new tiles found in Terraria 1.0.5Kinect Earth Move: KinectEarthMove sample code: Sample code releasedThis is a sample code for Kinect for Windows SDK beta, which was demonstrated on Channel 9 Kinect for Windows SKD beta launch event on June 17 2011. Using color image and skeleton data from Kinect and user in front of Kinect can manipulate the earth between his/her hands.NetOffice - The easiest way to use Office in .NET: NetOffice Release 0.9b: Changes: - fix critical issue 262334 (AccessViolationException while using events in a COMAddin) - remove x64 Assemblies (not necessary) Includes: - Runtime Binaries and Source Code for .NET Framework:......v2.0, v3.0, v3.5, v4.0 - Tutorials in C# and VB.Net:..............................................................COM Proxy Management, Events, etc. - Examples in C# and VB.Net:............................................................Excel, Word, Outlook, PowerPoint, Access - COMAddi...MiniTwitter: 1.70: MiniTwitter 1.70 ???? ?? ????? xAuth ?? OAuth ??????? 1.70 ??????????????????????????。 ???????????????? Twitter ? Web ??????????、PIN ????????????????????。??????????????????、???????????????????????????。Total Commander SkyDrive File System Plugin (.wfx): Total Commander SkyDrive File System Plugin 0.8.7b: Total Commander SkyDrive File System Plugin version 0.8.7b. Bug fixes: - BROKEN PLUGIN by upgrading SkyDriveServiceClient version 2.0.1b. Please do not forget to express your opinion of the plugin by rating it! Donate (EUR)SkyDrive .Net API Client: SkyDrive .Net API Client 2.0.1b (RELOADED): SkyDrive .Net API Client assembly has been RELOADED in version 2.0.1b as a REAL API. It supports the followings: - Creating root and sub folders - Uploading and downloading files - Renaming and deleting folders and files Bug fixes: - BROKEN API (issue 6834) Please do not forget to express your opinion of the assembly by rating it! Donate (EUR)Mini SQL Query: Mini SQL Query v1.0.0.59794: This release includes the following enhancements: Added a Most Recently Used file list Added Row counts to the query (per tab) and table view windows Added the Command Timeout option, only valid for MSSQL for now - see options If you have no idea what this thing is make sure you check out http://pksoftware.net/MiniSqlQuery/Help/MiniSqlQueryQuickStart.docx for an introduction. PK :-]HydroDesktop - CUAHSI Hydrologic Information System Desktop Application: 1.2.591 Beta Release: 1.2.591 Beta Releasepatterns & practices: Project Silk: Project Silk Community Drop 12 - June 22, 2011: Changes from previous drop: Minor code changes. New "Introduction" chapter. New "Modularity" chapter. Updated "Architecture" chapter. Updated "Server-Side Implementation" chapter. Updated "Client Data Management and Caching" chapter. Guidance Chapters Ready for Review The Word documents for the chapters are included with the source code in addition to the CHM to help you provide feedback. The PDF is provided as a separate download for your convenience. Installation Overview To ins...DropBox Linker: DropBox Linker 1.3: Added "Get links..." dialog, that provides selective public files links copying Get links link added to tray menu as the default option Fixed URL encoding .NET Framework 4.0 Client Profile requiredDotNetNuke® Community Edition: 06.00.00 Beta: Beta 1 (Build 2300) includes many important enhancements to the user experience. The control panel has been updated for easier access to the most important features and additional forms have been adapted to the new pattern. This release also includes many bug fixes that make it more stable than previous CTP releases. Beta ForumsBlogEngine.NET: BlogEngine.NET 2.5 RC: BlogEngine.NET Hosting - Click Here! 3 Months FREE – BlogEngine.NET Hosting – Click Here! This is a Release Candidate version for BlogEngine.NET 2.5. The most current, stable version of BlogEngine.NET is version 2.0. Find out more about the BlogEngine.NET 2.5 RC here. If you want to extend or modify BlogEngine.NET, you should download the source code. To get started, be sure to check out our installation documentation. If you are upgrading from a previous version, please take a look at ...New Projects6_6_6_w_m_s_open: jwervxsdfcfcf: cfcfChairforce hackathon project: project for hackathonDot Net Nuke Ajax Modules: This is a small collection of modules I think on once in a while which intend to improve a little dnn's user experience.Gnosis Game Engine: A simple game engine for the XNA 4.0 frame work that I am working on, mostly as a learning experience. I found that XNA game engines either require you to pay or are XNA 4.0 incompatible, and so this is my solution to that problem.KA_WindowsPhone7_Samples: Sample Code for Windows Phone 7 from http://kevinashley.comKinect MIDI Controller: This tool allows you to use a Kinect Sensor as a MIDI Controller for your Digital Audio Workbench. The tool is written in C#, and uses Microsoft Kinect SDK. Mosaic Project: Mosaic is an application that brings Metro UI to your desktop by live widgets.Movie Gate: A movie database that is also able to play the movies with your favorit media player.Musical Collective: An open-source web service that enables Musicians to collaborate on songs. Written in ASP.NET MVC (C#).NcADS-MVC: Clasificados MVCPokeTD: Ein kleines 2D Pokemon Tower-Defense Spiel. Es ist in C# und XNA geschrieben.PRO-TOKOL: PRO-TOKOL Server is a Programmable Logic Controller communication driver. The project is 100% coded in .NET Managed code. So, the dll can be included in any .NET project. The project uses the Microsoft Workflow Foundation to implement the DF1 Receiver and Transmitter logic.ShumaDaf: small project for display movies info directly from file structure using mymovies.xml. program create one simple xml file and display it!Silverlight Policy Service: The windows service act as a server and listens on TCP port 943 using IPv4 and IPv6. The socket policy included in the project allows all silverlight client applications to connect to TCP ports 4502-4506.SkinObject Module Wrapper: The SkinObject Module Wrapper is a DotNetNuke module that will allow you to add any DNN SkinObject to a page dinamically as if it was a DNN Module. Without any skin modification you can now inject new SkinObjects to you pages, configure the properties and change them on the fly.SkyNet0.3: Program that one should not be able to close.Team Zero Game One: SVN for the personal project(s) of Team Zero - Game One. We are creating a free game in HTML5 canvas using the CAKE api, found here: http://code.google.com/p/cakejs/ The game is about programming a small robot to move through a maze, sneaking past guards and other obstacles, using event-based programming. We've seen a number of games that allow you to "program" a character, and thought it would be interesting to do a different take on it. The game is still in early production, and actively ...Test-Driven Scaffolding (TDS): TDS helps developers of C# function members (methods, indexers, etc.) to quickly write drivers for code under development; these can easily be converted later to NUnit tests. TDS consists of C# code that can be pasted into a new or existing project and removed when no longer needed.Usage Agent: The Usage Agent toolset is designed to help manage your ISP data usage without having to log into your ISP usage page. It can optionally monitor your network card throughput and produce reports on usage. Developed in VB.NET.

  Read the article

• OpenVPN Configuration - Windows 7 client & debian server

  - by Guillaume

  I recently formatted my Windows 7 computer and lost my client's config files for OpenVPN. I recovered the certificates and default config that were left on the server but I haven't managed to make the whole thing work again. I assume the server's config and routing table are OK because it was working before (although quite some time ago). Would any of you experts be able to help? server.conf # Serveur TCP/666 mode server proto udp port 666 dev tun # Cles et certificats ca ca.crt cert server.crt key server.key dh dh1024.pem tls-auth ta.key 0 cipher AES-256-CBC # Reseau server 10.8.0.0 255.255.255.0 #push "redirect-gateway def1 bypass-dhcp" push "dhcp-option DNS 208.67.222.222" push "dhcp-option DNS 208.67.220.220" push "redirect-gateway def1" keepalive 10 120 # Securite user nobody group nogroup chroot /etc/openvpn/jail persist-key persist-tun comp-lzo # Log verb 3 mute 20 status openvpn-status.log log-append /var/log/openvpn.log client.conf # Client client dev tun proto udp remote *my server's ip address*:666 cipher AES-256-CBC # Cles ca ca.crt cert client1.crt key client1.key tls-auth ta.key 1 # Securite nobind persist-key persist-tun comp-lzo verb 3 Routing table on debian server when OpenVPN server is running: Destination Gateway Genmask Indic Metric Ref Use Iface 10.8.0.2 * 255.255.255.255 UH 0 0 0 tun0 10.8.0.0 10.8.0.2 255.255.255.0 UG 0 0 0 tun0 my server's ip * 255.255.255.0 U 0 0 0 eth0 default 72815.trg.dedic 0.0.0.0 UG 0 0 0 eth0 Routing table on Windows 7 client (OpenVPN not working) =========================================================================== Interface List 19...00 f0 8a 1b 6e 5c ......TAP-Win32 Adapter V9 12...90 2e 34 33 84 7b ......Atheros AR8151 PCI-E Gigabit Ethernet Controller ( NDIS 6.20) 1...........................Software Loopback Interface 1 12...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 13...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface 16...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.11 20 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 192.168.1.0 255.255.255.0 On-link 192.168.1.11 276 192.168.1.11 255.255.255.255 On-link 192.168.1.11 276 192.168.1.255 255.255.255.255 On-link 192.168.1.11 276 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.1.11 276 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.1.11 276 =========================================================================== Persistent Routes: None IPv6 Route Table =========================================================================== Active Routes: [...] =========================================================================== Persistent Routes: None And when the link is established between my client and the server: The server's routing table stays the same. The client's becomes: =========================================================================== Interface List 19...00 f0 8a 1b 6e 5c ......TAP-Win32 Adapter V9 12...90 2e 34 33 84 7b ......Atheros AR8151 PCI-E Gigabit Ethernet Controller ( NDIS 6.20) 1...........................Software Loopback Interface 1 12...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 13...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface 16...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.11 20 0.0.0.0 128.0.0.0 10.8.0.5 10.8.0.6 30 10.8.0.1 255.255.255.255 10.8.0.5 10.8.0.6 30 10.8.0.4 255.255.255.252 On-link 10.8.0.6 286 10.8.0.6 255.255.255.255 On-link 10.8.0.6 286 10.8.0.7 255.255.255.255 On-link 10.8.0.6 286 my server's ip 255.255.255.255 192.168.1.1 192.168.1.11 20 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 128.0.0.0 128.0.0.0 10.8.0.5 10.8.0.6 30 192.168.1.0 255.255.255.0 On-link 192.168.1.11 276 192.168.1.11 255.255.255.255 On-link 192.168.1.11 276 192.168.1.255 255.255.255.255 On-link 192.168.1.11 276 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.1.11 276 224.0.0.0 240.0.0.0 On-link 10.8.0.6 286 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.1.11 276 255.255.255.255 255.255.255.255 On-link 10.8.0.6 286 =========================================================================== Persistent Routes: None What's working: Server and client do connect to each other, SSL certificates are OK. The client gets an IP (10.8.0.6) from the server OpenVPN client is started as an administrator. But: I cannot ping the other one on either side. 'Gateway' value is empty on client's side (in the adapter's "status" window). Client has got no internet access when the link is up. Ideal configuration: I only want the client to be able to use the server's Internet access and access its resources (MySQL server in particular). I do not need or want the server to access the client's local network. The client needs to be able to access it's local network, although all Internet traffic should be redirected to the VPN link. I spent a considerable amount of time on this but it's still not working, any help would be much appreciated. Thanks :)

  Read the article

• outlook iptables configuration [update]

  - by mediaexpert

  I've a Debian mail server, but only the outlook users can't be able to download the emails. I've seen a lot of post about some kind of forwarding port configuration, I've tried some commands, but I don't be able to solve this problem, please help me. [LAST UPDATE] I find a lot of TIME WAIT on ipv6 netstat tcp6 0 0 my.mailserver.it:imap2 200-62-245-188.ip2:17060 TIME_WAIT - below some config files: pop3d I think the problem was here ##NAME: POP3AUTH:1 # # To advertise the SASL capability, per RFC 2449, uncomment the POP3AUTH # variable: # # POP3AUTH="LOGIN" # # If you have configured the CRAM-MD5, CRAM-SHA1 or CRAM-SHA256, set POP3AUTH # to something like this: # # POP3AUTH="LOGIN CRAM-MD5 CRAM-SHA1" POP3AUTH="" ##NAME: POP3AUTH_ORIG:1 # # For use by webadmin POP3AUTH_ORIG="PLAIN LOGIN CRAM-MD5 CRAM-SHA1 CRAM-SHA256" ##NAME: POP3AUTH_TLS:1 # # To also advertise SASL PLAIN if SSL is enabled, uncomment the # POP3AUTH_TLS environment variable: # # POP3AUTH_TLS="LOGIN PLAIN" POP3_TLS_REQUIRED = 0 POP3AUTH_TLS="" ##NAME: POP3AUTH_TLS_ORIG:0 # # For use by webadmin POP3AUTH_TLS_ORIG="LOGIN PLAIN" ##NAME: POP3_PROXY:0 # # Enable proxying. See README.proxy # # For use by webadmin POP3AUTH_TLS_ORIG="LOGIN PLAIN" ##NAME: POP3_PROXY:0 # # Enable proxying. See README.proxy POP3_PROXY=0 ##NAME: PROXY_HOSTNAME:0 # # Override value from gethostname() when checking if a proxy connection is # required. # PROXY_HOSTNAME= ##NAME: PORT:1 ##NAME: PROXY_HOSTNAME:0 # # Override value from gethostname() when checking if a proxy connection is # required. # PROXY_HOSTNAME= ##NAME: PORT:1 # # Port to listen on for connections. The default is port 110. # # Multiple port numbers can be separated by commas. When multiple port # numbers are used it is possibly to select a specific IP address for a # given port as "ip.port". For example, "127.0.0.1.900,192.68.0.1.900" # accepts connections on port 900 on IP addresses 127.0.0.1 and 192.68.0.1 # The ADDRESS setting is a default for ports that do not have a specified # IP address. # Port to listen on for connections. The default is port 110. # # Multiple port numbers can be separated by commas. When multiple port # numbers are used it is possibly to select a specific IP address for a # given port as "ip.port". For example, "127.0.0.1.900,192.68.0.1.900" # accepts connections on port 900 on IP addresses 127.0.0.1 and 192.68.0.1 # The ADDRESS setting is a default for ports that do not have a specified # IP address. PORT=110 ##NAME: ADDRESS:0 # # IP address to listen on. 0 means all IP addresses. ADDRESS=0 ##NAME: TCPDOPTS:0 # ##NAME: ADDRESS:0 # # IP address to listen on. 0 means all IP addresses. ADDRESS=0 ##NAME: TCPDOPTS:0 # # Other couriertcpd(1) options. The following defaults should be fine. # TCPDOPTS="-nodnslookup -noidentlookup" ##NAME: LOGGEROPTS:0 # # courierlogger(1) options. # LOGGEROPTS="-name=pop3d" ##NAME: DEFDOMAIN:0 # # Optional default domain. If the username does not contain the # first character of DEFDOMAIN, then it is appended to the username. # If DEFDOMAIN and DOMAINSEP are both set, then DEFDOMAIN is appended # only if the username does not contain any character from DOMAINSEP. # You can set different default domains based on the the interface IP # address using the -access and -accesslocal options of couriertcpd(1). DEFDOMAIN="@interzone.it" ##NAME: POP3DSTART:0 # # POP3DSTART is not referenced anywhere in the standard Courier programs # or scripts. Rather, this is a convenient flag to be read by your system # startup script in /etc/rc.d, like this: # # . /etc/courier/pop3d DEFDOMAIN="@mydomain.com" ##NAME: POP3DSTART:0 # # POP3DSTART is not referenced anywhere in the standard Courier programs # or scripts. Rather, this is a convenient flag to be read by your system # startup script in /etc/rc.d, like this: # # . /etc/courier/pop3d # case x$POP3DSTART in # x[yY]*) # /usr/lib/courier/pop3d.rc start # ;; # esac # # The default setting is going to be NO, until Courier is shipped by default # with enough platforms so that people get annoyed with having to flip it to # YES every time. # x[yY]*) # /usr/lib/courier/pop3d.rc start # ;; # esac # # The default setting is going to be NO, until Courier is shipped by default # with enough platforms so that people get annoyed with having to flip it to # YES every time. POP3DSTART=YES ##NAME: MAILDIRPATH:0 # # MAILDIRPATH - directory name of the maildir directory. # MAILDIRPATH=.maildir iptables Chain INPUT (policy DROP 20 packets, 1016 bytes) pkts bytes target prot opt in out source destination 60833 16M ACCEPT tcp -- eth0 * 0.0.0.0/0 0.0.0.0/0 tcp dpt:143 state NEW,ESTABLISHED 18970 971K ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp spts:1024:65535 dpt:110 state NEW,ESTABLISHED Chain FORWARD (policy DROP 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 0 0 ACCEPT tcp -- * * 192.168.0.0/24 0.0.0.0/0 tcp dpt:110 0 0 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 0 0 ACCEPT tcp -- * * 192.168.1.0/24 0.0.0.0/0 tcp dpt:110 0 0 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:25 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:110 pop3d.cnf RANDFILE = /usr/lib...pop3d.rand [req] default_bits = 1024 encrypt_key = yes distinguidhed_name = req_dn x509_extensions = cert_type prompt = no [req_dn] C=US ST=NY L= New York O=Courier Mail Server OU=Automatically-generated POP3 SSL key CN=localhost [email protected] [cert_type] nsCertType = server

  Read the article

• multiple valgrind errors: Conditional jump or move depends on uninitialised value(s)

  - by Hristo

  I'm running valgrind and I'm getting the following error (this is not the only one): ==21743== Conditional jump or move depends on uninitialised value(s) ==21743== at 0x4A06509: index (mc_replace_strmem.c:164) ==21743== by 0x33B7CBB3CD: gaih_inet (in /lib64/libc-2.5.so) ==21743== by 0x33B7CBD629: getaddrinfo (in /lib64/libc-2.5.so) ==21743== by 0x401A5F: tunnelURL (proxy.c:336) ==21743== by 0x40142A: client_thread (proxy.c:194) ==21743== by 0x33B8806616: start_thread (in /lib64/libpthread-2.5.so) ==21743== by 0x33B7CD3C2C: clone (in /lib64/libc-2.5.so) My tunnelURL() function looks like this: char * tunnelURL(char *url) { char * a = strstr(url, "//"); a += 2; char * path = strstr(a, "/"); char host[256]; strncpy (host, a, strlen(a)-strlen(path)); /* * The following is courtesy of Beej's Guide */ int status; int proxySocketFD; struct addrinfo hints; struct addrinfo *servinfo; // will point to the results memset(&hints, 0, sizeof(hints)); // make sure the struct is empty hints.ai_family = AF_INET; // don't care IPv4 or IPv6 hints.ai_socktype = SOCK_STREAM; // TCP stream sockets hints.ai_flags = AI_PASSIVE; // fill in my IP for me if ((status = getaddrinfo(host, "80", &hints, &servinfo)) != 0) { perror("getaddrinfo() fail"); exit(1); } // create socket if ((proxySocketFD = socket(servinfo->ai_family, servinfo->ai_socktype, servinfo->ai_protocol)) == -1) { perror("proxy socket() fail"); exit(1); } // connect if (connect(proxySocketFD, servinfo->ai_addr, servinfo->ai_addrlen) != 0) { printf("connect() fail"); exit(1); } // construct request char request[strlen(path) + strlen(host) + 26]; sprintf(request, "GET %s HTTP/1.1\r\nHost: %s\r\n\r\n", path, host); printf("%s", request); // send request send(proxySocketFD, request, strlen(request), 0); // receive response int i = 0; int amntRecvd = 0; char *pageContentBuffer = (char*) malloc(4096 * sizeof(char)); while ((amntRecvd = recv(proxySocketFD, pageContentBuffer + i, 4096, 0)) > 0) { i += amntRecvd; realloc(pageContentBuffer, i * 4096 * sizeof(char)); } // close proxy socket close(proxySocketFD); // deallocate memory freeaddrinfo(servinfo); return pageContentBuffer; } Line 336 corresponds to the if statement with the getaddrinfo() function call. I'm not really sure what I haven't initialized. The string I'm passing in "should" be already set... I'm printing it out just fine. I also get another error corresponding to the same line of code: ==21743== Use of uninitialised value of size 8 ==21743== at 0x33B7D05816: __nscd_cache_search (in /lib64/libc-2.5.so) ==21743== by 0x33B7D0438B: nscd_gethst_r (in /lib64/libc-2.5.so) ==21743== by 0x33B7D04B26: __nscd_gethostbyname2_r (in /lib64/libc-2.5.so) ==21743== by 0x33B7CE9F5E: gethostbyname2_r@@GLIBC_2.2.5 (in /lib64/libc-2.5.so) ==21743== by 0x33B7CBC522: gaih_inet (in /lib64/libc-2.5.so) ==21743== by 0x33B7CBD629: getaddrinfo (in /lib64/libc-2.5.so) ==21743== by 0x401A5F: tunnelURL (proxy.c:336) ==21743== by 0x40142A: client_thread (proxy.c:194) ==21743== by 0x33B8806616: start_thread (in /lib64/libpthread-2.5.so) ==21743== by 0x33B7CD3C2C: clone (in /lib64/libc-2.5.so) Any ideas as to what might becausing this? This is written in C btw... Thanks, Hristo

  Read the article

• Severe Tomcat crash has me stumped

  - by Eric Banderhide

  I'm pretty used to crashing my tomcat server. But I don't think I made any changes at all and seem to have broken it completely. Was working one min then not the next. I really hope someone can help here is the Catalina.out: Dec 20, 2012 1:35:56 AM org.apache.catalina.startup.Embedded initDirs SEVERE: Cannot find specified temporary folder at Dec 20, 2012 1:35:57 AM org.apache.catalina.core.AprLifecycleListener init INFO: Loaded APR based Apache Tomcat Native library 1.1.23. Dec 20, 2012 1:35:57 AM org.apache.catalina.core.AprLifecycleListener init INFO: APR capabilities: IPv6 [true], sendfile [true], accept filters [false], random [true]. Dec 20, 2012 1:35:57 AM org.apache.coyote.http11.Http11AprProtocol init INFO: Initializing Coyote HTTP/1.1 on http-8040 Dec 20, 2012 1:35:57 AM org.apache.coyote.ajp.AjpAprProtocol init INFO: Initializing Coyote AJP/1.3 on ajp-8042 Dec 20, 2012 1:35:57 AM org.apache.catalina.startup.Catalina load INFO: Initialization processed in 587 ms Dec 20, 2012 1:35:57 AM org.apache.catalina.core.StandardService start INFO: Starting service Catalina Dec 20, 2012 1:35:57 AM org.apache.catalina.core.StandardEngine start INFO: Starting Servlet Engine: Apache Tomcat/6.0.33 Dec 20, 2012 1:35:57 AM org.apache.catalina.startup.HostConfig deployDirectory INFO: Deploying web application directory docs Dec 20, 2012 1:35:57 AM org.apache.catalina.startup.HostConfig deployDirectory INFO: Deploying web application directory ROOT Dec 20, 2012 1:35:57 AM org.apache.catalina.startup.HostConfig deployDirectory INFO: Deploying web application directory myApp Dec 20, 2012 1:35:57 AM org.apache.catalina.loader.WebappClassLoader validateJarFile INFO: validateJarFile(/lhome/me/tomcat6/webapps/myApp/WEB-INF/lib/javax.servlet.jar) - jar not loaded. See Servlet Spec 2.3, section 9.7.2. Offending class: javax/servlet/Servlet.class Dec 20, 2012 1:35:58 AM org.apache.coyote.http11.Http11AprProtocol start INFO: Starting Coyote HTTP/1.1 on http-8040 Dec 20, 2012 1:35:58 AM org.apache.coyote.ajp.AjpAprProtocol start INFO: Starting Coyote AJP/1.3 on ajp-8042 Dec 20, 2012 1:35:58 AM org.apache.catalina.startup.Catalina start INFO: Server startup in 880 ms Error Reading TLE line 1: java.lang.Exception: TLE line 1 not valid first line Error Creating SGP4 Satellite Dec 20, 2012 1:36:26 AM org.apache.coyote.http11.Http11AprProtocol pause INFO: Pausing Coyote HTTP/1.1 on http-8040 Dec 20, 2012 1:36:26 AM org.apache.coyote.ajp.AjpAprProtocol pause INFO: Pausing Coyote AJP/1.3 on ajp-8042 Dec 20, 2012 1:36:27 AM org.apache.catalina.core.StandardService stop INFO: Stopping service Catalina Dec 20, 2012 1:36:30 AM org.apache.catalina.loader.WebappClassLoader clearReferencesJdbc SEVERE: The web application [/myApp] registered the JDBC driver [com.mysql.jdbc.Driver] but failed to unregister it when the web application was stopped. To prevent a memory leak, the JDBC Driver has been forcibly unregistered. Dec 20, 2012 1:36:30 AM org.apache.catalina.loader.WebappClassLoader clearReferencesThreads SEVERE: The web application [/myApp] is still processing a request that has yet to finish. This is very likely to create a memory leak. You can control the time allowed for requests to finish by using the unloadDelay attribute of the standard Context implementation. Dec 20, 2012 1:36:30 AM org.apache.catalina.loader.WebappClassLoader clearReferencesThreads SEVERE: The web application [/myApp] appears to have started a thread named [Timer-0] but has failed to stop it. This is very likely to create a memory leak. Dec 20, 2012 1:36:30 AM org.apache.coyote.http11.Http11AprProtocol destroy INFO: Stopping Coyote HTTP/1.1 on http-8040 Dec 20, 2012 1:36:30 AM org.apache.coyote.ajp.AjpAprProtocol destroy INFO: Stopping Coyote AJP/1.3 on ajp-8042 Dec 20, 2012 1:37:12 AM org.apache.catalina.startup.Catalina stopServer SEVERE: Catalina.stop: java.net.ConnectException: Connection refused at java.net.PlainSocketImpl.socketConnect(Native Method) at java.net.AbstractPlainSocketImpl.doConnect(AbstractPlainSocketImpl.java:339) at java.net.AbstractPlainSocketImpl.connectToAddress(AbstractPlainSocketImpl.java:200) at java.net.AbstractPlainSocketImpl.connect(AbstractPlainSocketImpl.java:182) at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:391) at java.net.Socket.connect(Socket.java:579) at java.net.Socket.connect(Socket.java:528) at java.net.Socket.<init>(Socket.java:425) at java.net.Socket.<init>(Socket.java:208) at org.apache.catalina.startup.Catalina.stopServer(Catalina.java:422) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) at java.lang.reflect.Method.invoke(Method.java:601) at org.apache.catalina.startup.Bootstrap.stopServer(Bootstrap.java:338) at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:416) And I have a new log that has been created, I've never seen it before but it seems to think its something severe. A long one but here it is: Massive Error Log I've never seen before

  Read the article

• How to allow bind in app armor?

  - by WitchCraft

  Question: I did setup bind9 as described here: http://ubuntuforums.org/showthread.php?p=12149576#post12149576 Now I have a little problem with apparmor: If I switch it off, it works. If apparmor runs, it doesn't work, and I get the following dmesg output: [ 23.809767] type=1400 audit(1344097913.519:11): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1540 comm="apparmor_parser" [ 23.811537] type=1400 audit(1344097913.519:12): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1540 comm="apparmor_parser" [ 23.812514] type=1400 audit(1344097913.523:13): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1540 comm="apparmor_parser" [ 23.821999] type=1400 audit(1344097913.531:14): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld" pid=1544 comm="apparmor_parser" [ 23.845085] type=1400 audit(1344097913.555:15): apparmor="STATUS" operation="profile_load" name="/usr/sbin/libvirtd" pid=1543 comm="apparmor_parser" [ 23.849051] type=1400 audit(1344097913.559:16): apparmor="STATUS" operation="profile_load" name="/usr/sbin/named" pid=1545 comm="apparmor_parser" [ 23.849509] type=1400 audit(1344097913.559:17): apparmor="STATUS" operation="profile_load" name="/usr/lib/libvirt/virt-aa-helper" pid=1542 comm="apparmor_parser" [ 23.851597] type=1400 audit(1344097913.559:18): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=1547 comm="apparmor_parser" [ 24.415193] type=1400 audit(1344097914.123:19): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/mysqld" pid=1625 comm="apparmor_parser" [ 24.738631] ip_tables: (C) 2000-2006 Netfilter Core Team [ 25.005242] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 25.187939] ADDRCONF(NETDEV_UP): virbr0: link is not ready [ 26.004282] Ebtables v2.0 registered [ 26.068783] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 28.158848] postgres (1900): /proc/1900/oom_adj is deprecated, please use /proc/1900/oom_score_adj instead. [ 29.840079] xenbr0: no IPv6 routers present [ 31.502916] type=1400 audit(1344097919.088:20): apparmor="DENIED" operation="mknod" parent=1984 profile="/usr/sbin/named" name="/var/log/query.log" pid=1989 comm="named" requested_mask="c" denied_mask="c" fsuid=107 ouid=107 [ 34.336141] xenbr0: port 1(eth0) entering forwarding state [ 38.424359] Event-channel device installed. [ 38.853077] XENBUS: Unable to read cpu state [ 38.854215] XENBUS: Unable to read cpu state [ 38.855231] XENBUS: Unable to read cpu state [ 38.858891] XENBUS: Unable to read cpu state [ 47.411497] device vif1.0 entered promiscuous mode [ 47.429245] ADDRCONF(NETDEV_UP): vif1.0: link is not ready [ 49.366219] virbr0: port 1(vif1.0) entering disabled state [ 49.366705] virbr0: port 1(vif1.0) entering disabled state [ 49.368873] virbr0: mixed no checksumming and other settings. [ 97.273028] type=1400 audit(1344097984.861:21): apparmor="DENIED" operation="mknod" parent=3076 profile="/usr/sbin/named" name="/var/log/query.log" pid=3078 comm="named" requested_mask="c" denied_mask="c" fsuid=107 ouid=107 [ 277.790627] type=1400 audit(1344098165.377:22): apparmor="DENIED" operation="mknod" parent=3384 profile="/usr/sbin/named" name="/var/log/query.log" pid=3389 comm="named" requested_mask="c" denied_mask="c" fsuid=0 ouid=0 [ 287.812986] type=1400 audit(1344098175.401:23): apparmor="DENIED" operation="mknod" parent=3325 profile="/usr/sbin/named" name="/root/tmp-gjnX0c0dDa" pid=3400 comm="named" requested_mask="c" denied_mask="c" fsuid=0 ouid=0 [ 287.818466] type=1400 audit(1344098175.405:24): apparmor="DENIED" operation="mknod" parent=3325 profile="/usr/sbin/named" name="/root/tmp-CpOtH52qU5" pid=3400 comm="named" requested_mask="c" denied_mask="c" fsuid=0 ouid=0 [ 323.166228] type=1400 audit(1344098210.753:25): apparmor="DENIED" operation="mknod" parent=3422 profile="/usr/sbin/named" name="/var/log/query.log" pid=3427 comm="named" requested_mask="c" denied_mask="c" fsuid=107 ouid=107 [ 386.512586] type=1400 audit(1344098274.101:26): apparmor="DENIED" operation="mknod" parent=3456 profile="/usr/sbin/named" name="/var/log/query.log" pid=3459 comm="named" requested_mask="c" denied_mask="c" fsuid=0 ouid=0 [ 808.549049] type=1400 audit(1344098696.137:27): apparmor="DENIED" operation="mknod" parent=3872 profile="/usr/sbin/named" name="/var/log/query.log" pid=3877 comm="named" requested_mask="c" denied_mask="c" fsuid=107 ouid=107 [ 894.671081] type=1400 audit(1344098782.257:28): apparmor="DENIED" operation="mknod" parent=3922 profile="/usr/sbin/named" name="/var/log/query.log" pid=3927 comm="named" requested_mask="c" denied_mask="c" fsuid=107 ouid=107 [ 968.514669] type=1400 audit(1344098856.101:29): apparmor="DENIED" operation="mknod" parent=3978 profile="/usr/sbin/named" name="/var/log/query.log" pid=3983 comm="named" requested_mask="c" denied_mask="c" fsuid=107 ouid=107 [ 1021.814582] type=1400 audit(1344098909.401:30): apparmor="DENIED" operation="mknod" parent=4010 profile="/usr/sbin/named" name="/var/log/query.log" pid=4012 comm="named" requested_mask="c" denied_mask="c" fsuid=107 ouid=107 [ 1063.856633] type=1400 audit(1344098951.445:31): apparmor="DENIED" operation="mknod" parent=4041 profile="/usr/sbin/named" name="/var/log/query.log" pid=4043 comm="named" requested_mask="c" denied_mask="c" fsuid=107 ouid=107 [ 1085.404001] type=1400 audit(1344098972.989:32): apparmor="DENIED" operation="mknod" parent=4072 profile="/usr/sbin/named" name="/var/log/query.log" pid=4077 comm="named" requested_mask="c" denied_mask="c" fsuid=107 ouid=107 [ 1108.207402] type=1400 audit(1344098995.793:33): apparmor="DENIED" operation="mknod" parent=4102 profile="/usr/sbin/named" name="/var/log/query.log" pid=4107 comm="named" requested_mask="c" denied_mask="c" fsuid=107 ouid=107 [ 1156.947189] type=1400 audit(1344099044.533:34): apparmor="DENIED" operation="mknod" parent=4134 profile="/usr/sbin/named" name="/var/log/query.log" pid=4136 comm="named" requested_mask="c" denied_mask="c" fsuid=107 ouid=107 [ 1166.768005] type=1400 audit(1344099054.353:35): apparmor="DENIED" operation="mknod" parent=4150 profile="/usr/sbin/named" name="/var/log/query.log" pid=4155 comm="named" requested_mask="c" denied_mask="c" fsuid=107 ouid=107 [ 1168.873385] type=1400 audit(1344099056.461:36): apparmor="DENIED" operation="mknod" parent=4162 profile="/usr/sbin/named" name="/var/log/query.log" pid=4167 comm="named" requested_mask="c" denied_mask="c" fsuid=107 ouid=107 [ 1181.558946] type=1400 audit(1344099069.145:37): apparmor="DENIED" operation="mknod" parent=4177 profile="/usr/sbin/named" name="/var/log/query.log" pid=4182 comm="named" requested_mask="c" denied_mask="c" fsuid=0 ouid=0 [ 1199.349265] type=1400 audit(1344099086.937:38): apparmor="DENIED" operation="mknod" parent=4191 profile="/usr/sbin/named" name="/var/log/query.log" pid=4196 comm="named" requested_mask="c" denied_mask="c" fsuid=0 ouid=0 [ 1296.805604] type=1400 audit(1344099184.393:39): apparmor="DENIED" operation="mknod" parent=4232 profile="/usr/sbin/named" name="/var/log/query.log" pid=4237 comm="named" requested_mask="c" denied_mask="c" fsuid=107 ouid=107 [ 1317.730568] type=1400 audit(1344099205.317:40): apparmor="DENIED" operation="mknod" parent=3325 profile="/usr/sbin/named" name="/tmp-nuBes0IXwi" pid=4251 comm="named" requested_mask="c" denied_mask="c" fsuid=107 ouid=107 [ 1317.730744] type=1400 audit(1344099205.317:41): apparmor="DENIED" operation="mknod" parent=3325 profile="/usr/sbin/named" name="/tmp-ZDJA06ZOkU" pid=4252 comm="named" requested_mask="c" denied_mask="c" fsuid=107 ouid=107 [ 1365.072687] type=1400 audit(1344099252.661:42): apparmor="DENIED" operation="mknod" parent=3325 profile="/usr/sbin/named" name="/tmp-EnsuYUrGOC" pid=4290 comm="named" requested_mask="c" denied_mask="c" fsuid=107 ouid=107 [ 1365.074520] type=1400 audit(1344099252.661:43): apparmor="DENIED" operation="mknod" parent=3325 profile="/usr/sbin/named" name="/tmp-LVCnpWOStP" pid=4287 comm="named" requested_mask="c" denied_mask="c" fsuid=107 ouid=107 [ 1380.336984] type=1400 audit(1344099267.925:44): apparmor="DENIED" operation="mknod" parent=4617 profile="/usr/sbin/named" name="/var/log/query.log" pid=4622 comm="named" requested_mask="c" denied_mask="c" fsuid=107 ouid=107 [ 1437.924534] type=1400 audit(1344099325.513:45): apparmor="DENIED" operation="mknod" parent=3325 profile="/usr/sbin/named" name="/tmp-Uyf1dHIZUU" pid=4648 comm="named" requested_mask="c" denied_mask="c" fsuid=107 ouid=107 [ 1437.924626] type=1400 audit(1344099325.513:46): apparmor="DENIED" operation="mknod" parent=3325 profile="/usr/sbin/named" name="/tmp-OABXWclII3" pid=4647 comm="named" requested_mask="c" denied_mask="c" fsuid=107 ouid=107 [ 1526.334959] type=1400 audit(1344099413.921:47): apparmor="DENIED" operation="mknod" parent=4749 profile="/usr/sbin/named" name="/var/log/query.log" pid=4754 comm="named" requested_mask="c" denied_mask="c" fsuid=0 ouid=0 [ 1601.292548] type=1400 audit(1344099488.881:48): apparmor="DENIED" operation="mknod" parent=4835 profile="/usr/sbin/named" name="/var/log/query.log" pid=4840 comm="named" requested_mask="c" denied_mask="c" fsuid=0 ouid=0 [ 1639.543733] type=1400 audit(1344099527.129:49): apparmor="DENIED" operation="mknod" parent=4905 profile="/usr/sbin/named" name="/var/log/query.log" pid=4907 comm="named" requested_mask="c" denied_mask="c" fsuid=107 ouid=107 [ 1916.381179] type=1400 audit(1344099803.969:50): apparmor="DENIED" operation="mknod" parent=4959 profile="/usr/sbin/named" name="/var/log/query.log" pid=4961 comm="named" requested_mask="c" denied_mask="c" fsuid=107 ouid=107 [ 1940.816898] type=1400 audit(1344099828.405:51): apparmor="DENIED" operation="mknod" parent=4991 profile="/usr/sbin/named" name="/var/log/query.log" pid=4996 comm="named" requested_mask="c" denied_mask="c" fsuid=107 ouid=107 [ 2043.010898] type=1400 audit(1344099930.597:52): apparmor="DENIED" operation="mknod" parent=5048 profile="/usr/sbin/named" name="/var/log/query.log" pid=5053 comm="named" requested_mask="c" denied_mask="c" fsuid=107 ouid=107 [ 2084.956230] type=1400 audit(1344099972.545:53): apparmor="DENIED" operation="mknod" parent=3325 profile="/usr/sbin/named" name="/var/log/tmp-XYgr33RqUt" pid=5069 comm="named" requested_mask="c" denied_mask="c" fsuid=0 ouid=0 [ 2084.959120] type=1400 audit(1344099972.545:54): apparmor="DENIED" operation="mknod" parent=3325 profile="/usr/sbin/named" name="/var/log/tmp-vO24RHwL14" pid=5066 comm="named" requested_mask="c" denied_mask="c" fsuid=0 ouid=0 [ 2088.169500] type=1400 audit(1344099975.757:55): apparmor="DENIED" operation="mknod" parent=5076 profile="/usr/sbin/named" name="/var/log/query.log" pid=5078 comm="named" requested_mask="c" denied_mask="c" fsuid=0 ouid=0 [ 2165.625096] type=1400 audit(1344100053.213:56): apparmor="STATUS" operation="profile_remove" name="/sbin/dhclient" pid=5124 comm="apparmor" [ 2165.625401] type=1400 audit(1344100053.213:57): apparmor="STATUS" operation="profile_remove" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=5124 comm="apparmor" [ 2165.625608] type=1400 audit(1344100053.213:58): apparmor="STATUS" operation="profile_remove" name="/usr/lib/connman/scripts/dhclient-script" pid=5124 comm="apparmor" [ 2165.625782] type=1400 audit(1344100053.213:59): apparmor="STATUS" operation="profile_remove" name="/usr/lib/libvirt/virt-aa-helper" pid=5124 comm="apparmor" [ 2165.625931] type=1400 audit(1344100053.213:60): apparmor="STATUS" operation="profile_remove" name="/usr/sbin/libvirtd" pid=5124 comm="apparmor" [ 2165.626057] type=1400 audit(1344100053.213:61): apparmor="STATUS" operation="profile_remove" name="/usr/sbin/mysqld" pid=5124 comm="apparmor" [ 2165.626181] type=1400 audit(1344100053.213:62): apparmor="STATUS" operation="profile_remove" name="/usr/sbin/named" pid=5124 comm="apparmor" [ 2165.626319] type=1400 audit(1344100053.213:63): apparmor="STATUS" operation="profile_remove" name="/usr/sbin/tcpdump" pid=5124 comm="apparmor" [ 3709.583927] type=1400 audit(1344101597.169:64): apparmor="STATUS" operation="profile_load" name="/usr/sbin/libvirtd" pid=7484 comm="apparmor_parser" [ 3709.839895] type=1400 audit(1344101597.425:65): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld" pid=7485 comm="apparmor_parser" [ 3710.008892] type=1400 audit(1344101597.597:66): apparmor="STATUS" operation="profile_load" name="/usr/lib/libvirt/virt-aa-helper" pid=7483 comm="apparmor_parser" [ 3710.545232] type=1400 audit(1344101598.133:67): apparmor="STATUS" operation="profile_load" name="/usr/sbin/named" pid=7486 comm="apparmor_parser" [ 3710.655600] type=1400 audit(1344101598.241:68): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=7481 comm="apparmor_parser" [ 3710.656013] type=1400 audit(1344101598.241:69): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=7481 comm="apparmor_parser" [ 3710.656786] type=1400 audit(1344101598.245:70): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=7481 comm="apparmor_parser" [ 3710.832624] type=1400 audit(1344101598.421:71): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=7488 comm="apparmor_parser" [ 3717.573123] type=1400 audit(1344101605.161:72): apparmor="DENIED" operation="open" parent=7505 profile="/usr/sbin/named" name="/var/log/query.log" pid=7510 comm="named" requested_mask="ac" denied_mask="ac" fsuid=107 ouid=0 [ 3743.667808] type=1400 audit(1344101631.253:73): apparmor="STATUS" operation="profile_remove" name="/sbin/dhclient" pid=7552 comm="apparmor" [ 3743.668338] type=1400 audit(1344101631.257:74): apparmor="STATUS" operation="profile_remove" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=7552 comm="apparmor" [ 3743.668625] type=1400 audit(1344101631.257:75): apparmor="STATUS" operation="profile_remove" name="/usr/lib/connman/scripts/dhclient-script" pid=7552 comm="apparmor" [ 3743.668834] type=1400 audit(1344101631.257:76): apparmor="STATUS" operation="profile_remove" name="/usr/lib/libvirt/virt-aa-helper" pid=7552 comm="apparmor" [ 3743.668991] type=1400 audit(1344101631.257:77): apparmor="STATUS" operation="profile_remove" name="/usr/sbin/libvirtd" pid=7552 comm="apparmor" [ 3743.669127] type=1400 audit(1344101631.257:78): apparmor="STATUS" operation="profile_remove" name="/usr/sbin/mysqld" pid=7552 comm="apparmor" [ 3743.669282] type=1400 audit(1344101631.257:79): apparmor="STATUS" operation="profile_remove" name="/usr/sbin/named" pid=7552 comm="apparmor" [ 3743.669520] type=1400 audit(1344101631.257:80): apparmor="STATUS" operation="profile_remove" name="/usr/sbin/tcpdump" pid=7552 comm="apparmor" [ 3873.572336] type=1400 audit(1344101761.161:81): apparmor="STATUS" operation="profile_load" name="/usr/sbin/libvirtd" pid=7722 comm="apparmor_parser" [ 3873.826209] type=1400 audit(1344101761.413:82): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld" pid=7723 comm="apparmor_parser" [ 3873.988181] type=1400 audit(1344101761.577:83): apparmor="STATUS" operation="profile_load" name="/usr/lib/libvirt/virt-aa-helper" pid=7721 comm="apparmor_parser" [ 3874.520305] type=1400 audit(1344101762.109:84): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=7719 comm="apparmor_parser" [ 3874.520736] type=1400 audit(1344101762.109:85): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=7719 comm="apparmor_parser" [ 3874.521000] type=1400 audit(1344101762.109:86): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=7719 comm="apparmor_parser" [ 3874.528878] type=1400 audit(1344101762.117:87): apparmor="STATUS" operation="profile_load" name="/usr/sbin/named" pid=7724 comm="apparmor_parser" [ 3874.930712] type=1400 audit(1344101762.517:88): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=7726 comm="apparmor_parser" [ 3971.744599] type=1400 audit(1344101859.333:89): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/libvirtd" pid=7899 comm="apparmor_parser" [ 3972.009857] type=1400 audit(1344101859.597:90): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/mysqld" pid=7900 comm="apparmor_parser" [ 3972.165297] type=1400 audit(1344101859.753:91): apparmor="STATUS" operation="profile_replace" name="/usr/lib/libvirt/virt-aa-helper" pid=7898 comm="apparmor_parser" [ 3972.587766] type=1400 audit(1344101860.173:92): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/named" pid=7901 comm="apparmor_parser" [ 3972.847189] type=1400 audit(1344101860.433:93): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=7896 comm="apparmor_parser" [ 3972.847705] type=1400 audit(1344101860.433:94): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=7896 comm="apparmor_parser" [ 3972.848150] type=1400 audit(1344101860.433:95): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=7896 comm="apparmor_parser" [ 3973.147889] type=1400 audit(1344101860.733:96): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/tcpdump" pid=7903 comm="apparmor_parser" [ 3988.863999] type=1400 audit(1344101876.449:97): apparmor="DENIED" operation="open" parent=7939 profile="/usr/sbin/named" name="/var/log/query.log" pid=7944 comm="named" requested_mask="ac" denied_mask="ac" fsuid=107 ouid=0 [ 4025.826132] type=1400 audit(1344101913.413:98): apparmor="STATUS" operation="profile_remove" name="/sbin/dhclient" pid=7975 comm="apparmor" [ 4025.826627] type=1400 audit(1344101913.413:99): apparmor="STATUS" operation="profile_remove" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=7975 comm="apparmor" [ 4025.826861] type=1400 audit(1344101913.413:100): apparmor="STATUS" operation="profile_remove" name="/usr/lib/connman/scripts/dhclient-script" pid=7975 comm="apparmor" [ 4025.827059] type=1400 audit(1344101913.413:101): apparmor="STATUS" operation="profile_remove" name="/usr/lib/libvirt/virt-aa-helper" pid=7975 comm="apparmor" [ 4025.827214] type=1400 audit(1344101913.413:102): apparmor="STATUS" operation="profile_remove" name="/usr/sbin/libvirtd" pid=7975 comm="apparmor" [ 4025.827352] type=1400 audit(1344101913.413:103): apparmor="STATUS" operation="profile_remove" name="/usr/sbin/mysqld" pid=7975 comm="apparmor" [ 4025.827485] type=1400 audit(1344101913.413:104): apparmor="STATUS" operation="profile_remove" name="/usr/sbin/named" pid=7975 comm="apparmor" [ 4025.827624] type=1400 audit(1344101913.413:105): apparmor="STATUS" operation="profile_remove" name="/usr/sbin/tcpdump" pid=7975 comm="apparmor" [ 4027.862198] type=1400 audit(1344101915.449:106): apparmor="STATUS" operation="profile_load" name="/usr/sbin/libvirtd" pid=8090 comm="apparmor_parser" [ 4039.500920] audit_printk_skb: 21 callbacks suppressed [ 4039.500932] type=1400 audit(1344101927.089:114): apparmor="STATUS" operation="profile_remove" name="/sbin/dhclient" pid=8114 comm="apparmor" [ 4039.501413] type=1400 audit(1344101927.089:115): apparmor="STATUS" operation="profile_remove" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=8114 comm="apparmor" [ 4039.501672] type=1400 audit(1344101927.089:116): apparmor="STATUS" operation="profile_remove" name="/usr/lib/connman/scripts/dhclient-script" pid=8114 comm="apparmor" [ 4039.501861] type=1400 audit(1344101927.089:117): apparmor="STATUS" operation="profile_remove" name="/usr/lib/libvirt/virt-aa-helper" pid=8114 comm="apparmor" [ 4039.502033] type=1400 audit(1344101927.089:118): apparmor="STATUS" operation="profile_remove" name="/usr/sbin/libvirtd" pid=8114 comm="apparmor" [ 4039.502170] type=1400 audit(1344101927.089:119): apparmor="STATUS" operation="profile_remove" name="/usr/sbin/mysqld" pid=8114 comm="apparmor" [ 4039.502305] type=1400 audit(1344101927.089:120): apparmor="STATUS" operation="profile_remove" name="/usr/sbin/named" pid=8114 comm="apparmor" [ 4039.502442] type=1400 audit(1344101927.089:121): apparmor="STATUS" operation="profile_remove" name="/usr/sbin/tcpdump" pid=8114 comm="apparmor" [ 4041.425405] type=1400 audit(1344101929.013:122): apparmor="STATUS" operation="profile_load" name="/usr/lib/libvirt/virt-aa-helper" pid=8240 comm="apparmor_parser" [ 4041.425952] type=1400 audit(1344101929.013:123): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=8238 comm="apparmor_parser" [ 4058.910390] audit_printk_skb: 18 callbacks suppressed [ 4058.910401] type=1400 audit(1344101946.497:130): apparmor="STATUS" operation="profile_remove" name="/sbin/dhclient" pid=8264 comm="apparmor" [ 4058.910757] type=1400 audit(1344101946.497:131): apparmor="STATUS" operation="profile_remove" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=8264 comm="apparmor" [ 4058.910969] type=1400 audit(1344101946.497:132): apparmor="STATUS" operation="profile_remove" name="/usr/lib/connman/scripts/dhclient-script" pid=8264 comm="apparmor" [ 4058.911185] type=1400 audit(1344101946.497:133): apparmor="STATUS" operation="profile_remove" name="/usr/lib/libvirt/virt-aa-helper" pid=8264 comm="apparmor" [ 4058.911335] type=1400 audit(1344101946.497:134): apparmor="STATUS" operation="profile_remove" name="/usr/sbin/libvirtd" pid=8264 comm="apparmor" [ 4058.911595] type=1400 audit(1344101946.497:135): apparmor="STATUS" operation="profile_remove" name="/usr/sbin/mysqld" pid=8264 comm="apparmor" [ 4058.911856] type=1400 audit(1344101946.497:136): apparmor="STATUS" operation="profile_remove" name="/usr/sbin/named" pid=8264 comm="apparmor" [ 4058.912001] type=1400 audit(1344101946.497:137): apparmor="STATUS" operation="profile_remove" name="/usr/sbin/tcpdump" pid=8264 comm="apparmor" [ 4060.266700] type=1400 audit(1344101947.853:138): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=8391 comm="apparmor_parser" [ 4060.268356] type=1400 audit(1344101947.857:139): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=8391 comm="apparmor_parser" [ 5909.432749] audit_printk_skb: 18 callbacks suppressed [ 5909.432759] type=1400 audit(1344103797.021:146): apparmor="DENIED" operation="open" parent=8800 profile="/usr/sbin/named" name="/var/log/query.log" pid=8805 comm="named" requested_mask="ac" denied_mask="ac" fsuid=107 ouid=0 root@zotac:~# What can I do that it still works and I don't have to disable apparmor ?

  Read the article

• CodePlex Daily Summary for Friday, March 04, 2011

  CodePlex Daily Summary for Friday, March 04, 2011Popular ReleasesyoutubeFisher: YouTubeFisher v3.0 Beta: Adding support for more video formats including the Super HD (e.g. http://www.youtube.com/watch?v=MrrHs2bnHPA) Minor change related to the video title due to change in YouTube pageSnippet Designer: Snippet Designer 1.3.1: Snippet Designer 1.3.1 for Visual Studio 2010This is a bug fix release. Change logFixed bug where Snippet Designer would fail if you had the most recent Productivity Power Tools installed Fixed bug where "Export as Snippet" was failing in non-english locales Fixed bug where opening a new .snippet file would fail in non-english localesChiave File Encryption: Chiave 1.0: Final Relase for Chave 1.0 Stable: Application for file encryption and decryption using 512 Bit rijndael encyrption algorithm with simple to use UI. Its written in C# and compiled in .Net version 3.5. It incorporates features of Windows 7 like Jumplists, Taskbar progress and Aero Glass. Now with added support to Windows XP! Change Log from 0.9.2 to 1.0: ==================== Added: > Added Icon Overlay for Windows 7 Taskbar Icon. >Added Thumbnail Toolbar buttons to make the navigation easier...AutoLoL: AutoLoL v1.6.3: Fixes some bugs in the previous releaseNetwork Monitor Decryption Expert: NMDecrypt 2.3: The NMDecryption Expert has been updated. In general these changes are: Updated Logging Support for multiple sessions that use the same cert with Session ID resuse. Fixed some bugs with IPv6 traffic and tunneled traffic Updated Version Info Made changes for assignment to Outercurve Foundation See the release blog for more information.DirectQ: Release 1.8.7 (RC1): Release candidate 1 of 1.8.7Chirpy - VS Add In For Handling Js, Css, DotLess, and T4 Files: Margogype Chirpy (ver 2.0): Chirpy loves Americans. Chirpy hates Americanos.ASP.NET: Sprite and Image Optimization Preview 3: The ASP.NET Sprite and Image Optimization framework is designed to decrease the amount of time required to request and display a page from a web server by performing a variety of optimizations on the page’s images. This is the third preview of the feature and works with ASP.NET Web Forms 4, ASP.NET MVC 3, and ASP.NET Web Pages (Razor) projects. The binaries are also available via NuGet: AspNetSprites-Core AspNetSprites-WebFormsControl AspNetSprites-MvcAndRazorHelper It includes the foll...Document.Editor: 2011.9: Whats new for Document.Editor 2011.9: New Templates System New Plug-in System New Replace dialog New reset settings Minor Bug Fix's, improvements and speed upsTortoiseHg: TortoiseHg 2.0: TortoiseHg 2.0 is a complete rewrite of TortoiseHg 1.1, switching from PyGtk to PyQtSandcastle Help File Builder: SHFB v1.9.2.0 Release: This release supports the Sandcastle June 2010 Release (v2.6.10621.1). It includes full support for generating, installing, and removing MS Help Viewer files. This new release is compiled under .NET 4.0, supports Visual Studio 2010 solutions and projects as documentation sources, and adds support for projects targeting the Silverlight Framework. NOTE: The included help file and the online help have not been completely updated to reflect all changes in this release. A refresh will be issue...Network Monitor Open Source Parsers: Microsoft Network Monitor Parsers 3.4.2554: The Network Monitor Parsers packages contain parsers for more than 400 network protocols, including RFC based public protocols and protocols for Microsoft products defined in the Microsoft Open Specifications for Windows and SQL Server. NetworkMonitor_Parsers.msi is the base parser package which defines parsers for commonly used public protocols and protocols for Microsoft Windows. In this release, we have added 4 new protocol parsers and updated 79 existing parsers in the NetworkMonitor_Pa...Image Resizer for Windows: Image Resizer 3 Preview 1: Prepare to have your minds blown. This is the first preview of what will eventually become 39613. There are still a lot of rough edges and plenty of areas still under construction, but for your basic needs, it should be relativly stable. Note: You will need the .NET Framework 4 installed to use this version. Below is a status report of where this release is in terms of the overall goal for version 3. If you're feeling a bit technically ambitious and want to check out some of the features th...JSON Toolkit: JSON Toolkit 1.1: updated GetAllJsonObjects() method and GetAllProperties() methods to JsonObject and Properties propertiesFacebook Graph Toolkit: Facebook Graph Toolkit 1.0: Refer to http://computerbeacon.net for Documentation and Tutorial New features:added FQL support added Expires property to Api object added support for publishing to a user's friend / Facebook Page added support for posting and removing comments on posts added support for adding and removing likes on posts and comments added static methods for Page class added support for Iframe Application Tab of Facebook Page added support for obtaining the user's country, locale and age in If...ASP.NET MVC Project Awesome, jQuery Ajax helpers (controls): 1.7.1: A rich set of helpers (controls) that you can use to build highly responsive and interactive Ajax-enabled Web applications. These helpers include Autocomplete, AjaxDropdown, Lookup, Confirm Dialog, Popup Form, Popup and Pager small improvements for some helpers and AjaxDropdown has Data like the Lookup except it's value gets reset and list refilled if any element from data gets changedManaged Extensibility Framework: MEF 2 Preview 3: This release aims .net 4.0 and Silverlight 4.0. Accordingly, there are two solutions files. The assemblies are named System.ComponentModel.Composition.Codeplex.dll as a way to avoid clashing with the version shipped with the 4th version of the framework. Introduced CompositionOptions to container instantiation CompositionOptions.DisableSilentRejection makes MEF throw an exception on composition errors. Useful for diagnostics Support for open generics Support for attribute-less registr...PHPExcel: PHPExcel 1.7.6 Production: DonationsDonate via PayPal via PayPal. If you want to, we can also add your name / company on our Donation Acknowledgements page. PEAR channelWe now also have a full PEAR channel! Here's how to use it: New installation: pear channel-discover pear.pearplex.net pear install pearplex/PHPExcel Or if you've already installed PHPExcel before: pear upgrade pearplex/PHPExcel The official page can be found at http://pearplex.net. Want to contribute?Please refer the Contribute page.WPF Application Framework (WAF): WPF Application Framework (WAF) 2.0.0.4: Version: 2.0.0.4 (Milestone 4): This release contains the source code of the WPF Application Framework (WAF) and the sample applications. Requirements .NET Framework 4.0 (The package contains a solution file for Visual Studio 2010) The unit test projects require Visual Studio 2010 Professional Remark The sample applications are using Microsoft’s IoC container MEF. However, the WPF Application Framework (WAF) doesn’t force you to use the same IoC container in your application. You can use ...VidCoder: 0.8.2: Updated auto-naming to handle seconds and frames ranges as well. Deprecated the {chapters} token for auto-naming in favor of {range}. Allowing file drag to preview window and enabling main window shortcut keys to work no matter what window is focused. Added option in config to enable giving custom names to audio tracks. (Note that these names will only show up certain players like iTunes or on the iPod. Players that support custom track names normally may not show them.) Added tooltips ...New Projects.NET Serial To TCP proxy server: serial2tcp written to share your hardware serial ports as TCP port. You can easily turn your physical PC into terminal server. View session input/output or send commands to the physical port. Very useful when automating work with embedded devices. Developed in C#.Amazon SES SMTP: The C# code for a simple SMTP Server that forwards emails to Amazon Simple Email Service, either by acting as a SmartHost behind IIS SMTP Server or as a standalone SMTP server. It can be run in the background as either a Windows Service or a Console/Windows Application Azure Membership, Role, and Profile Providers: Complete ASP.NET solution that uses the Azure Table Storage and Azure Blob storage as a data source for a custom Membership, Role, and Profile providers. Developed in C# on the .NET 4 framework using Azure SDK V1.3. Helps you get up and running with Azure in no time. MIT license.CRM 2011 Code Snippets for Visual Studio: A set of JavaScript and C# code snippets to facilitate common Microsoft Dynamics CRM 2011 development for Visual Studio 2010.DDRMenu: DDRMenu is a templated menu provider for DotNetNuke that can produce any menu style you wish. In particular it comes with templates to upgrade a standard DNNMenu or SolPartMenu to provide true hyperlinks, SEO friendliness and animated transitions.Entity Framework CTP5 Extensions Library: The ADO.NET Entity Framework Extensions library contains a set of utility classes with additional functionality to Entity Framework CTP5.eTrader Pro: An easy-to-use, lightweight and customisable e-commerce solution developed in ASP.NET and SQL Server. Build an online shop in no time. Skin using ASP.NET themes. Localised for English and Spanish with integral CMS, order management and e-marketing tools.euler 12 problem: euler 12 problemeuler 19 problem: euler 19 problemeuler23: euler 23eXed: eXed (eXtended XML editor) is an XSD-based XML editor, i.e. it assumes that you have a working XSD file. The XSD is used to improve your editing experience, provide you with dynamic help, and validation. It is therefore not for those who want to write an XML file from scratch.FIM PowerShell Workflow Activity: The FIM WF Activity for PowerShell makes is easy to use PowerShell inside FIM workflows. The activity is also a good example of using diagnostic tracing inside FIM WF.FremyCompany Math Equation Editor: A WPF Component that can import MathML and LaTeX to be edited in a WYSIWYG word processor. It is intended to allow both visual and computer-comprehensive (formula in programming language) exportation. Scope and functionnalites are intended to be expanded over time.Geenie OS: A New Cosmos OSGeoBot: Monitoring and ControllingiRODS .NET: To be populated laterLicensePlateRecognition: A software for recognizing a car license plate number.LINQ for .NET 2.0: Backport of LINQ and Linq.Dynamic to the .NET Framework 2.0. The sources used to port it are taken from the mono project. http://ftp.novell.com/pub/mono/sources-stable/ It requires Visual Studio 2010 to compile. It won't compile on Visual Studio 2005.mobilestandards: MobileStandards project-creating a web2.0 BannerMy MVC store Implementation: My implementation of MVC music storeOrchard Localization JP: Localizing Project of Orchard. This project is intended to host localizing project to Japanes. Orchard ???????????。 ??????????、???????????????????。 ???????????。Paragon: Expands the basic functionality of the .NET Framework. It takes into consider basic defensive coding practices and reduces the common coding tasks.Project Unity: Research and EUA, spamming across the Halo-AA and Blam Game Engines, developed by Bungie LLC. This Project is NOT endorsed/supported by Bungie, Gearbox, Microsogy Game Studios In any way.Rabbit Framework: A lightweight framework for building dynamic web sites using ASP.NET Web Pages.ScrollableList: Just to make the project looking betterSharePoint Kerberos Buddy: The SharePoint Kerberos Buddy provides an intelligent client application that examines a mixed tier SharePoint environment locating commonly misconfigured Kerberos configuration elements. The application can detect errors on SharePoint, SSAS, SSRS, and on the client.SMI 2.0: This project is the creation of the next generation of the SMI app (previously written in VB6).SPChainGang: SPChainGang is a custom application aimed to simplify scanning, reporting, and fixing broken links in a SharePoint 2007 or SharePoint 2010 farm. SPProperties: SPProperties is a console app (command-line) that allows listing all properties of an SPWeb (property bag) and adding or updating properties. Relates to SharePoint site properties.State Machine DSL: State Machine DSL is extension to Visual Studio 2010 to provide simple and visualized way of programming state machines. It uses T4 Text Templates for code generation.tBrowser: Browser based on the IEuMoveDocType: uMoveDocType attempts to intelligently move your selected Umbraco Doc Type to a new parent.Virtual 8085: Virtual 8085 is a tool which enables students to run programs written in 8085 assembly language on a personal computer instead of a microprocessor kit. Virtual 8085 do not actually simulate the real hardware of Intel 8085, but it interprets the 8085 assembly language programs.WinAppTranslate: WinAppTranslate or WAT, Helps Visual Studio Programmers to translate Windows Applications. It is not based on the framework localization program… and it is a console application to run via VS post builds ????: ??????

  Read the article

• CodePlex Daily Summary for Wednesday, November 02, 2011

  CodePlex Daily Summary for Wednesday, November 02, 2011Popular ReleasesWYGIWYS Driver: 1.1.2.0 release: Win32, x86, kernel mode driver.Reset IPv6: 1.0.0.0: First release. Only works for Spanish and English operating system editions.BExplorer (Better Explorer): Better Explorer 2.0.0.631 Alpha: Changelog: Added: Some new functions in ribbon Added: Possibility to choose displayed columns Added: Basic Search Fixed: Some bugs after navigation Fixed: Attempt to fix slow navigation and slow start Known issues: - BreadcrumbBar fails on some situations - Basic search not work quite well in some situations Please if anyone find bugs be kind and report them at the Issue Tracker! Thanks!DotNetNuke® Community Edition: 05.06.04: Major Highlights Fixed issue with upgrades on systems that had upgraded the Telerik library to 6.0.0 Fixed issue with Razor Host upgrade to 5.6.3 The logic for module administration checks contains incorrect logic in 1 place, opening the possibility of a user with edit permissions gaining access to functionality they should not have through a particularly crafted url Security FixesBrowsers support the ability to remember common strings such as usernames/addresses etc. Code was adde...Terminals: Version 2.0 - Beta 2 Release: The team has finally put the nail into the official release date for version 2.0. As bugs are winding down on the 2.0 Roadmap we decided to push out another build - the first 2.0 Beta build. Please take time to use and abuse this release. We left logging in place, and this is a debug build so be sure to submit your logs on each bug reported, and please do report all bugs! Check the source code page on the site, this beta includes all commits since (and including) the 90428 check-in back i...iTuner - The iTunes Companion: iTuner 1.4.4322: Added German (unverified, apologies if incorrect) Properly source invariant resources with correct resIDs Replaced obsolete lyric providers with working providers Fix Pseudolater to correctly morph every third char Fix null reference in CatalogBaseTrack Folder Changes: Track Folder Changes 1.0: Track Folder Changes 1.0 (binary)Windows Workflow Foundation on Codeplex: Microsoft.Activities v1.8.8: Microsoft.Activities Overview How do I install Microsoft.Activities? Updates in this release9318Technical Analysis Engine for .NET: Technical Analysis Engine 1.25: What's new in the 1.25 release (2011-11-01): - Added Williams %R indicator - Added Moving Average Envelopes indicatorBF3Rcon.NET: BF3Rcon 3.0: This release is targeted for RCON documentation based on R3. Everything should be beta stable, but it's alpha because I haven't been able to fully test it. When a stable release is ready, a proper changelog will be kept. Important Edit: There's one method that will keep this from working in Mono. GeneratePasswordHash uses void HashAlgorithm.Dispose(), which isn't in Mono. This will have to be changed to Clear() in the next release. If anyone needs a Mono version of this immediately, you can...BoxWorld: BoxWorld_2011.10.30: BoxWorld - 8.0.1110.30 This is the initial release of BoxWorld. I'd recommend downloading the installer as it contains the compiled code and everything all nicely contained. By default, you end up with this directory structure: C:\Program Files\ViperWorks\BoxWorld C:\Program Files\ViperWorks\BoxWorld\Data C:\Program Files\ViperWorks\BoxWorld\Interface C:\Program Files\ViperWorks\BoxWorld\Source In the root you have the compiled EXE files, one for the main release, one for the LITE release ...VidCoder: 1.2.1: Fixed a couple regressions: video encoder was blank in queue and crashes with the High Profile preset when opening the Settings window. Fixed problem with auto-update introduced in 1.2.0. If you have 1.2.0 you will need to update manually to get this.Koober: Koober - The Ebook Creator 0.2: The official release of Koober as Open source. Koober is a ebook creator for Windows, and Koob Reader is the reader.patterns & practices: Enterprise Library Contrib: Enterprise Library Contrib - 5.0 (Oct 2011): This release of Enterprise Library Contrib is based on the Microsoft patterns & practices Enterprise Library 5.0 core and contains the following: Common extensionsTypeConfigurationElement<T> - A Polymorphic Configuration Element without having to be part of a PolymorphicConfigurationElementCollection. AnonymousConfigurationElement - A Configuration element that can be uniquely identified without having to define its name explicitly. Data Access Application Block extensionsMySql Provider - ...Network Monitor Open Source Parsers: Network Monitor Parsers 3.4.2748: The Network Monitor Parsers packages contain parsers for more than 400 network protocols, including RFC based public protocols and protocols for Microsoft products defined in the Microsoft Open Specifications for Windows and SQL Server. NetworkMonitor_Parsers.msi is the base parser package which defines parsers for commonly used public protocols and protocols for Microsoft Windows. In this release, NetowrkMonitor_Parsers.msi continues to improve quality and fix bugs. It has included the fo...Media Companion: MC 3.420b Weekly: Ensure .NET 4.0 Full Framework is installed. (Available from http://www.microsoft.com/download/en/details.aspx?id=17718) Ensure the NFO ID fix is applied when transitioning from versions prior to 3.416b. (Details here) Movies Fixed: Fanart and poster scraping issues TV Shows (Re)Added: Rebuild single show Fixed: Issue when shows are moved from original location Ability to handle " for actor nicknames Crash when episode name contains "<" (does not scrape yet) Clears fanart when switch...patterns & practices - Unity: Unity 3.0 for .NET4.5 Preview: The Unity 3.0.1026.0 Preview enables Unity to work on .NET 4.5 with both the WinRT and desktop profiles. The major changes include: Unity projects updated to target .NET 4.5. Dynamic build plans modified to use compiled lambda expressions instead of Reflection.Emit Converting reflection to use the new TypeInfo for reflection. Projects updated to work with the Microsoft Visual Studio 2011 Preview Notes/Known Issues: The Microsoft.Practices.Unity.UnityServiceLocator class cannot be use...Managed Extensibility Framework: MEF 2 Preview 4: Detailed information on this release is available on the BCL team blog.AcDown????? - Anime&Comic Downloader: AcDown????? v3.6: ?? ● AcDown??????????、??????，??????????????????????，???????Acfun、Bilibili、???、???、???、Tucao.cc、SF???、?????80????，???????????、?????????。 ● AcDown???????????????????????????，???，???????????????????。 ● AcDown???????C#??，????.NET Framework 2.0??。?????"Acfun?????"。 ????32??64? Windows XP/Vista/7 ????????????? ??：????????Windows XP???,?????????.NET Framework 2.0???(x86)?.NET Framework 2.0???(x64)，?????"?????????"??? ??????????????，??????????： ??"AcDown?????"????????? ?? v3.6?? ??“????”...Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.33: Add JSParser.ParseExpression method to parse JavaScript expressions rather than source-elements. Add -strict switch (CodeSettings.StrictMode) to force input code to ECMA5 Strict-mode (extra error-checking, "use strict" at top). Fixed bug when MinifyCode setting was set to false but RemoveUnneededCode was left it's default value of true.New ProjectsAlgorithms: algorithms, ACM C++ programs, Electronic design automation algorithmsAll-In-One: Ein Programm - Alle Funktionen Einfach Komponente erstellen - und schon gibt es eine Funktion mehr!Bar Code File Copy: Bar Code File Copy is a mobile app that allows user to initiate file transfer from a PC to another with the help of barcodes and Windows Phone 7.BlekBoox: Google Books API CF-Soft: this is my workspace to study C# programming.CodePaste.NET Tray Application: A simple tray application to create snippets on CodePaste.NET. Right click the app and select New Snippet. A snippet will be created, the contents of your clipboard will be pasted and your clipboard will be replaced with the URL after the code snippet is successfully posted.Common libs of fanthos: Fanthos.Libs.Controls provides panel and button with special draw and special events. Fanthos.Libs.Network provides class that you can use the method likes Async WCF in dotNet 2.0.Database Filesystem: The DBFS project implements a filesystem paradigm to the storage of objects in a database. The primary development language is Visual Basic .NET.Destructible Texture2D: The project shows how to create a destructible texture2D in XNA. This project is developed using the XNA framework and C# programming languageEject and Close CD Tray: For some reason i cannot seem to find any command line program to eject or close the cd tray. So i've created my own version and sharing it for everyone to use. It is an extremely simplistic program with the sole aim of ejecting or closing the cd tray and nothing else.Excel add-in for pricing options: Price options using various distributions.FDFToolkit .NET: FDFToolkit .NET makes it easier to read, write, create, populate, merge FDF, XDP, XFDF, and XML data with Acrobat and LiveCycle PDF forms. FDFToolkit.net utilizes iTextSharp 4.x technologies, under MPL license.Fiction Catalog: A catalog project designed to store information about fictional literature.Gangbee Software: This is customized version of Nopcommerce 1.9Guess Number: This simple program is letting you to guess number from 1 to 20. H? th?ng Khách s?n: H? th?ng qu?n lí khách s?nHelloTipi Photo Downloader: Permet de télécharger les photos en qualité original de votre site de famille [url:HelloTipi|http://www.hellotipi.com].Image Tagger & Resizer: Resize, and text in the lower right of picture with i.e. copyright information.Kinect Sensor Controller: A project using kinect sensor to control objectsKJFramework.Dynamic ??????: KJFramework.Dynamic ???????? KJFramework????????????????????，?????????: KJFramework.Dynamic(??????). ???????????????????????，???????????????，?????????， ????????????????????，????，???????????????，??????????(??，???????)。 ????，?????????????????????(Component), ??????DynamicDomainComponent??。 ??，????????????，???????????DynamicDomainService??。 ??????，???????????? ???????DynamicDomainService。 ??DynamicDomainService??，????????????????。 ?????, ????????????(Tunnel)???，??????(Tunnel)...Lan ETS Player Registration Software: This is the custom software that the Lan ETS staff uses to register people when they arrive at the LAN party.LINQ to Calil: LINQ to Calil ????? (http://calil.jp/) ???????? API ? LINQ ????????。???????????? LINQ ???????????????。.NET Framework 4 ???????、Silverlight ??????????。 LINQ to Calil ??????????????????????????????????????。Login Form in VB: <project name> makes it easier for <target user group> to <activity>. You'll no longer have to <activity>. It's developed in <programming language>.MbpGpsTester: MbpGpsTester is a gps test tool.Mi proyecto: Mi proyectoMy NuGET Packages: This project contains a custom program that allows you to quickly update NuGET packages from multiple sources and package feeds. It also contains set-up of some packages that are used by HydroDesktop.MyyoutubeforWp7: MyyoutubeforWp7 is a youtube application where users can search and view the videoNERO'S TOOLS: NEROS TOOLS will be an area of programming tools and resources for the automation control industry and the everyday usage of major control systems software.NetWebScript: NetWebScript is a IL to JavaScript compiler. It allow to write complex web application in C# or any other .Net language. It provide Visual Studio integration to debug into orginial sources. It allow to share code with server.Northern Lights WP7 Toolkit: Northern Lights WP7 Toolkit contains some common tools for WP7 Developers.SccmBoundaryHealthTool: .NET application that will search the AD forest for SCCM boundary configurations and report the following: * Overlapping boundaries, including those inter-boundary type, e.g. IP subnet overlaps with AD site. * Unassigned AD sites * Orphaned AD sites in SCCMSeven: Seven is a set of tools for programs development using the Oberon 07 language. SOAP Test Application (with EWS Tools): Application that allows testing of SOAP implementations, in particular Exchange Web Services.SocialCastDotNet: C# library for accessing the SocialCast APISosyal: Sosyal as.sqlce_perfDemo: just a bit of code to demonstrate sqlce insert performance on the desktop. I'm using sqlce on the desktop to persist data as its the fastest thing I can find. Insert perfromance seems to top out at around 65,000records/sec on my laptop but it also seems to limited at this point by my hard drive speeds. The sample code should be able to accept a dataTable, dataReader or dataset and persit to a sqlce database. Also in the code is a small wrapper on the sqlce connectionstring (localconne...SqlMon for OracleClient: This is a project to doing a tool just like Quest SQL Monitor that capture sql sentence in client side.So it's so cool that juect join in and user it. It's developed in C# and Visual Studio 2010 and bases on the EasyHook that is a powerfull .NET hook library.It injects in oci.dll and hook the "OCIStmtPrepare" function which excute before sql excuting,through the parameter "stms" we can get the sqltext and display itStackOverflow Offline Reader using a pdf reader: Using one or more keywords and number of questions to download, the app creates and displays a single pdf file of the questions and answers pertaining to the keyword(s). This enables the user to read questions in an offline manner or to read in a top/down fashion. std::streambuf wrapper for COM IStream: This provides a subclass of std::streambuf that wraps a COM IStream, so you can use an IStream with any C++ code that uses iostreams or the STL algorithms with a streambuf_iterator. It does no internal buffering whatsoever (I'd be happy to change this if someone needs it).step out ring signatures .net: Simple program to demonstrate how srs works in real world of .net.System Center Service Manager 2010 SP1 WCF and Web Service: Simple WCF Service and Web Service for SCSM 2010 SP1.System32 - SDK de componentes y acceso a datos para .NET: System32 - SDK de componentes y acceso a datos para .NET Taha Mail: A Java Web Based MailTest TDS: Test TFS - 1Track Folder Changes: Displays in real time a tree with the list of created/deleted/changed files in a specific directory and its subdirectoriesumbTrafficCentral: A plugin for Umbraco that adds robust and scalable handling of redirects, storing the data in the media library. WebDAV Test Application: Application to test WebDAV functionality.XnaXaml: XnaXaml allows you to add a XAML file to your Content Pipeline in XNA and edit straight from Visual Studio. It then takes the XAML file and parses through it to create mock objects that can be used to render controls to the screen in XNA. These mock objects can also be used to pass data to any GUI system you choose.???-?????????? ?? ????????????? ????????? ??????????? ??????? ???: Under construction

  Read the article

• Acer aspire 5735z wireless not working after upgrade to 11.10

  - by Jon

  I cant get my wifi card to work at all after upgrading to 11.10 Oneiric. I'm not sure where to start to fix this. Ive tried using the additional drivers tool but this shows that no additional drivers are needed. Before my upgrade I had a drivers working for the Rt2860 chipset. Any help on this would be much appreciated.... thanks Jon jon@ubuntu:~$ ifconfig eth0 Link encap:Ethernet HWaddr 00:1d:72:ec:76:d5 inet addr:192.168.1.134 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::21d:72ff:feec:76d5/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:7846 errors:0 dropped:0 overruns:0 frame:0 TX packets:7213 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:8046624 (8.0 MB) TX bytes:1329442 (1.3 MB) Interrupt:16 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:91 errors:0 dropped:0 overruns:0 frame:0 TX packets:91 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:34497 (34.4 KB) TX bytes:34497 (34.4 KB) Ive included by dmesg output below [ 0.428818] NET: Registered protocol family 2 [ 0.429003] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.430562] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.436614] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.437409] TCP: Hash tables configured (established 524288 bind 65536) [ 0.437412] TCP reno registered [ 0.437431] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.437482] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.437678] NET: Registered protocol family 1 [ 0.437705] pci 0000:00:02.0: Boot video device [ 0.437892] PCI: CLS 64 bytes, default 64 [ 0.437916] Simple Boot Flag at 0x57 set to 0x1 [ 0.438294] audit: initializing netlink socket (disabled) [ 0.438309] type=2000 audit(1319243447.432:1): initialized [ 0.440763] Freeing initrd memory: 13416k freed [ 0.468362] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.488192] VFS: Disk quotas dquot_6.5.2 [ 0.488254] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.488888] fuse init (API version 7.16) [ 0.488985] msgmni has been set to 5890 [ 0.489381] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.489413] io scheduler noop registered [ 0.489415] io scheduler deadline registered [ 0.489460] io scheduler cfq registered (default) [ 0.489583] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.489633] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X [ 0.489699] pcieport 0000:00:1c.1: setting latency timer to 64 [ 0.489741] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X [ 0.489800] pcieport 0000:00:1c.2: setting latency timer to 64 [ 0.489841] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X [ 0.489904] pcieport 0000:00:1c.3: setting latency timer to 64 [ 0.489944] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X [ 0.490006] pcieport 0000:00:1c.4: setting latency timer to 64 [ 0.490047] pcieport 0000:00:1c.4: irq 44 for MSI/MSI-X [ 0.490126] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.490149] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.490196] intel_idle: MWAIT substates: 0x1110 [ 0.490198] intel_idle: does not run on family 6 model 15 [ 0.491240] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.493473] ACPI: AC Adapter [ADP1] (on-line) [ 0.493590] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 [ 0.496771] ACPI: Lid Switch [LID0] [ 0.496818] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 [ 0.496823] ACPI: Sleep Button [SLPB] [ 0.496865] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.496869] ACPI: Power Button [PWRF] [ 0.496900] ACPI: acpi_idle registered with cpuidle [ 0.498719] Monitor-Mwait will be used to enter C-1 state [ 0.498753] Monitor-Mwait will be used to enter C-2 state [ 0.498761] Marking TSC unstable due to TSC halts in idle [ 0.517627] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.517630] ACPI: Thermal Zone [TZS0] (67 C) [ 0.524796] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.524799] ACPI: Thermal Zone [TZS1] (67 C) [ 0.524823] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.524852] ERST: Table is not found! [ 0.524948] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.680991] ACPI: Battery Slot [BAT0] (battery present) [ 0.688567] Linux agpgart interface v0.103 [ 0.688672] agpgart-intel 0000:00:00.0: Intel GM45 Chipset [ 0.688865] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable [ 0.689786] agpgart-intel 0000:00:00.0: detected 65536K stolen memory [ 0.689912] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 0.691006] brd: module loaded [ 0.691510] loop: module loaded [ 0.691967] Fixed MDIO Bus: probed [ 0.691990] PPP generic driver version 2.4.2 [ 0.692065] tun: Universal TUN/TAP device driver, 1.6 [ 0.692067] tun: (C) 1999-2004 Max Krasnyansky <[email protected]> [ 0.692146] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.692181] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 20 (level, low) -> IRQ 20 [ 0.692206] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 0.692210] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 0.692255] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.692289] ehci_hcd 0000:00:1a.7: debug port 1 [ 0.696181] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported [ 0.696202] ehci_hcd 0000:00:1a.7: irq 20, io mem 0xf8904800 [ 0.712014] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.712131] hub 1-0:1.0: USB hub found [ 0.712136] hub 1-0:1.0: 6 ports detected [ 0.712230] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.712243] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.712247] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.712287] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.712315] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.716201] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 0.716216] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8904c00 [ 0.732014] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.732130] hub 2-0:1.0: USB hub found [ 0.732135] hub 2-0:1.0: 6 ports detected [ 0.732209] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.732223] uhci_hcd: USB Universal Host Controller Interface driver [ 0.732254] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.732262] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.732265] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.732298] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.732325] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001820 [ 0.732441] hub 3-0:1.0: USB hub found [ 0.732445] hub 3-0:1.0: 2 ports detected [ 0.732508] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20 [ 0.732514] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 0.732518] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.732553] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.732577] uhci_hcd 0000:00:1a.1: irq 20, io base 0x00001840 [ 0.732696] hub 4-0:1.0: USB hub found [ 0.732700] hub 4-0:1.0: 2 ports detected [ 0.732762] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20 [ 0.732768] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 0.732772] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 0.732805] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 0.732829] uhci_hcd 0000:00:1a.2: irq 20, io base 0x00001860 [ 0.732942] hub 5-0:1.0: USB hub found [ 0.732946] hub 5-0:1.0: 2 ports detected [ 0.733007] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.733014] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.733017] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.733057] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 0.733082] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001880 [ 0.733202] hub 6-0:1.0: USB hub found [ 0.733206] hub 6-0:1.0: 2 ports detected [ 0.733265] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.733273] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.733276] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.733313] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 0.733351] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018a0 [ 0.733466] hub 7-0:1.0: USB hub found [ 0.733470] hub 7-0:1.0: 2 ports detected [ 0.733532] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.733539] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.733542] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.733578] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 0.733610] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018c0 [ 0.733730] hub 8-0:1.0: USB hub found [ 0.733736] hub 8-0:1.0: 2 ports detected [ 0.733843] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.751594] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.751605] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.751732] mousedev: PS/2 mouse device common for all mice [ 0.752670] rtc_cmos 00:08: RTC can wake from S4 [ 0.752770] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0 [ 0.752796] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.752907] device-mapper: uevent: version 1.0.3 [ 0.752976] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: [email protected] [ 0.753028] cpuidle: using governor ladder [ 0.753093] cpuidle: using governor menu [ 0.753096] EFI Variables Facility v0.08 2004-May-17 [ 0.753361] TCP cubic registered [ 0.753482] NET: Registered protocol family 10 [ 0.753966] NET: Registered protocol family 17 [ 0.753992] Registering the dns_resolver key type [ 0.754113] PM: Hibernation image not present or could not be loaded. [ 0.754131] registered taskstats version 1 [ 0.771553] Magic number: 15:152:507 [ 0.771667] rtc_cmos 00:08: setting system clock to 2011-10-22 00:30:48 UTC (1319243448) [ 0.772238] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.772240] EDD information not available. [ 0.774165] Freeing unused kernel memory: 984k freed [ 0.774504] Write protecting the kernel read-only data: 10240k [ 0.774755] Freeing unused kernel memory: 20k freed [ 0.775093] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.779727] Freeing unused kernel memory: 1400k freed [ 0.801946] udevd[84]: starting version 173 [ 0.880950] sky2: driver version 1.28 [ 0.881046] sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.881096] sky2 0000:02:00.0: setting latency timer to 64 [ 0.881197] sky2 0000:02:00.0: Yukon-2 Extreme chip revision 2 [ 0.881871] sky2 0000:02:00.0: irq 45 for MSI/MSI-X [ 0.896273] sky2 0000:02:00.0: eth0: addr 00:1d:72:ec:76:d5 [ 0.910630] ahci 0000:00:1f.2: version 3.0 [ 0.910647] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.910710] ahci 0000:00:1f.2: irq 46 for MSI/MSI-X [ 0.910775] ahci: SSS flag set, parallel bus scan disabled [ 0.910812] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode [ 0.910816] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs [ 0.910821] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.941773] scsi0 : ahci [ 0.941954] scsi1 : ahci [ 0.942038] scsi2 : ahci [ 0.942118] scsi3 : ahci [ 0.942196] scsi4 : ahci [ 0.942268] scsi5 : ahci [ 0.942332] ata1: SATA max UDMA/133 abar m2048@0xf8904000 port 0xf8904100 irq 46 [ 0.942336] ata2: SATA max UDMA/133 abar m2048@0xf8904000 port 0xf8904180 irq 46 [ 0.942339] ata3: DUMMY [ 0.942340] ata4: DUMMY [ 0.942344] ata5: SATA max UDMA/133 abar m2048@0xf8904000 port 0xf8904300 irq 46 [ 0.942347] ata6: SATA max UDMA/133 abar m2048@0xf8904000 port 0xf8904380 irq 46 [ 1.028061] usb 1-5: new high speed USB device number 2 using ehci_hcd [ 1.181775] usbcore: registered new interface driver uas [ 1.260062] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.261126] ata1.00: ATA-8: Hitachi HTS543225L9A300, FBEOC40C, max UDMA/133 [ 1.261129] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.262360] ata1.00: configured for UDMA/133 [ 1.262518] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54322 FBEO PQ: 0 ANSI: 5 [ 1.262716] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.262762] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 1.262824] sd 0:0:0:0: [sda] Write Protect is off [ 1.262827] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.262851] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.287277] sda: sda1 sda2 sda3 [ 1.287693] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.580059] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.581188] ata2.00: ATAPI: HL-DT-STDVDRAM GT10N, 1.00, max UDMA/100 [ 1.582663] ata2.00: configured for UDMA/100 [ 1.584162] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GT10N 1.00 PQ: 0 ANSI: 5 [ 1.585821] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.585824] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.585953] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.586038] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.632061] usb 6-1: new low speed USB device number 2 using uhci_hcd [ 1.908056] ata5: SATA link down (SStatus 0 SControl 300) [ 2.228065] ata6: SATA link down (SStatus 0 SControl 300) [ 2.228955] Initializing USB Mass Storage driver... [ 2.229052] usbcore: registered new interface driver usb-storage [ 2.229054] USB Mass Storage support registered. [ 2.235827] scsi6 : usb-storage 1-5:1.0 [ 2.235987] usbcore: registered new interface driver ums-realtek [ 2.244451] input: B16_b_02 USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/input/input4 [ 2.244598] generic-usb 0003:046D:C025.0001: input,hidraw0: USB HID v1.10 Mouse [B16_b_02 USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1/input0 [ 2.244620] usbcore: registered new interface driver usbhid [ 2.244622] usbhid: USB HID core driver [ 3.091083] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null) [ 3.238275] scsi 6:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS [ 3.348261] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 3.351897] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 47.138012] udevd[334]: starting version 173 [ 47.177678] lp: driver loaded but no devices found [ 47.197084] wmi: Mapper loaded [ 47.197526] acer_wmi: Acer Laptop ACPI-WMI Extras [ 47.210227] acer_wmi: Brightness must be controlled by generic video driver [ 47.566578] Disabling lock debugging due to kernel taint [ 47.584050] ndiswrapper version 1.56 loaded (smp=yes, preempt=no) [ 47.620666] type=1400 audit(1319239895.347:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=624 comm="apparmor_parser" [ 47.620934] type=1400 audit(1319239895.347:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=624 comm="apparmor_parser" [ 47.621108] type=1400 audit(1319239895.347:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=624 comm="apparmor_parser" [ 47.633056] [drm] Initialized drm 1.1.0 20060810 [ 47.722594] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 47.722602] i915 0000:00:02.0: setting latency timer to 64 [ 47.807152] ndiswrapper (check_nt_hdr:141): kernel is 64-bit, but Windows driver is not 64-bit;bad magic: 010B [ 47.807159] ndiswrapper (load_sys_files:206): couldn't prepare driver 'rt2860' [ 47.807930] ndiswrapper (load_wrap_driver:108): couldn't load driver rt2860; check system log for messages from 'loadndisdriver' [ 47.856250] usbcore: registered new interface driver ndiswrapper [ 47.861772] i915 0000:00:02.0: irq 47 for MSI/MSI-X [ 47.861781] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 47.861783] [drm] Driver supports precise vblank timestamp query. [ 47.861842] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 47.980620] fixme: max PWM is zero. [ 48.286153] fbcon: inteldrmfb (fb0) is primary device [ 48.287033] Console: switching to colour frame buffer device 170x48 [ 48.287062] fb0: inteldrmfb frame buffer device [ 48.287064] drm: registered panic notifier [ 48.333883] acpi device:02: registered as cooling_device2 [ 48.334053] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5 [ 48.334128] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 48.334203] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 48.334644] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0 [ 48.334652] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0 [ 48.334673] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 48.334737] HDA Intel 0000:00:1b.0: irq 48 for MSI/MSI-X [ 48.334772] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 48.356107] Adding 261116k swap on /host/ubuntu/disks/swap.disk. Priority:-1 extents:1 across:261116k [ 48.380946] hda_codec: ALC268: BIOS auto-probing. [ 48.390242] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 [ 48.390365] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 48.490870] EXT4-fs (loop0): re-mounted. Opts: errors=remount-ro,user_xattr [ 48.917990] ppdev: user-space parallel port driver [ 48.950729] type=1400 audit(1319239896.675:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=941 comm="apparmor_parser" [ 48.951114] type=1400 audit(1319239896.675:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=941 comm="apparmor_parser" [ 48.977706] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa44000/0xa0000 [ 49.048871] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8 [ 49.078713] sky2 0000:02:00.0: eth0: enabling interface [ 49.079462] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 50.762266] sky2 0000:02:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control rx [ 50.762702] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 54.751478] type=1400 audit(1319239902.475:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=1039 comm="apparmor_parser" [ 54.755907] type=1400 audit(1319239902.479:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1040 comm="apparmor_parser" [ 54.756237] type=1400 audit(1319239902.483:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1040 comm="apparmor_parser" [ 54.756417] type=1400 audit(1319239902.483:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1040 comm="apparmor_parser" [ 54.764825] type=1400 audit(1319239902.491:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=1041 comm="apparmor_parser" [ 54.768365] type=1400 audit(1319239902.495:12): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=1041 comm="apparmor_parser" [ 54.770601] type=1400 audit(1319239902.495:13): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=1041 comm="apparmor_parser" [ 54.770729] type=1400 audit(1319239902.495:14): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=1038 comm="apparmor_parser" [ 54.775181] type=1400 audit(1319239902.499:15): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1043 comm="apparmor_parser" [ 54.775533] type=1400 audit(1319239902.499:16): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=1043 comm="apparmor_parser" [ 54.936691] init: failsafe main process (891) killed by TERM signal [ 54.944583] init: apport pre-start process (1096) terminated with status 1 [ 55.000373] init: apport post-stop process (1160) terminated with status 1 [ 55.005291] init: gdm main process (1159) killed by TERM signal [ 59.782579] EXT4-fs (loop0): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0 [ 60.992021] eth0: no IPv6 routers present [ 61.936072] device eth0 entered promiscuous mode [ 62.053949] Bluetooth: Core ver 2.16 [ 62.054005] NET: Registered protocol family 31 [ 62.054007] Bluetooth: HCI device and connection manager initialized [ 62.054010] Bluetooth: HCI socket layer initialized [ 62.054012] Bluetooth: L2CAP socket layer initialized [ 62.054993] Bluetooth: SCO socket layer initialized [ 62.058750] Bluetooth: RFCOMM TTY layer initialized [ 62.058758] Bluetooth: RFCOMM socket layer initialized [ 62.058760] Bluetooth: RFCOMM ver 1.11 [ 62.059428] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 62.059432] Bluetooth: BNEP filters: protocol multicast [ 62.460389] init: plymouth-stop pre-start process (1662) terminated with status 1 '

  Read the article

• Sockets: Transport endpoint is not connected on send

  - by TheoretiCAL

  I'm trying to learn socket programming from http://beej.us/guide/bgnet/output/html/singlepage/bgnet.html and am attempting to build a SOCK_STREAM client/server. My client: #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <errno.h> #include <string.h> #include <sys/types.h> #include <sys/socket.h> #include <netinet/in.h> #include <arpa/inet.h> #include <netdb.h> #define SERVERPORT "4951" // the port users will be connecting to int main(int argc, char *argv[]) { int sockfd; struct addrinfo hints, *servinfo, *p; int rv; int numbytes; if (argc != 3) { fprintf(stderr,"usage: talker hostname message\n"); exit(1); } memset(&hints, 0, sizeof hints); hints.ai_family = AF_UNSPEC; hints.ai_socktype = SOCK_STREAM; if ((rv = getaddrinfo(argv[1], SERVERPORT, &hints, &servinfo)) != 0) { fprintf(stderr, "getaddrinfo: %s\n", gai_strerror(rv)); return 1; } // loop through all the results and make a socket for(p = servinfo; p != NULL; p = p->ai_next) { if ((sockfd = socket(p->ai_family, p->ai_socktype, p->ai_protocol)) == -1) { perror("talker: socket"); continue; if (connect(sockfd, p->ai_addr, p->ai_addrlen) == -1) { close(sockfd); perror("client: connect"); continue; } } break; } if (p == NULL) { fprintf(stderr, "talker: failed to bind socket\n"); return 2; } if ((numbytes = send(sockfd, argv[2], strlen(argv[2]), 0) == -1)) { perror("talker: send"); exit(1); } freeaddrinfo(servinfo); printf("talker: sent %d bytes to %s\n", numbytes, argv[1]); close(sockfd); return 0; } Server: #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <errno.h> #include <string.h> #include <sys/types.h> #include <sys/socket.h> #include <netinet/in.h> #include <arpa/inet.h> #include <netdb.h> #define MYPORT "4951" // the port users will be connecting to #define MAXBUFLEN 100 static int backlog = 10; // get sockaddr, IPv4 or IPv6: void *get_in_addr(struct sockaddr *sa) { if (sa->sa_family == AF_INET) { return &(((struct sockaddr_in*)sa)->sin_addr); } return &(((struct sockaddr_in6*)sa)->sin6_addr); } int main(void) { int sockfd; struct addrinfo hints, *servinfo, *p; int rv; int numbytes; int new_fd; socklen_t addr_size; struct sockaddr_storage their_addr; char buf[MAXBUFLEN]; char s[INET6_ADDRSTRLEN]; memset(&hints, 0, sizeof hints); hints.ai_family = AF_UNSPEC; // set to AF_INET to force IPv4 hints.ai_socktype = SOCK_STREAM; hints.ai_flags = AI_PASSIVE; // use my IP if ((rv = getaddrinfo(NULL, MYPORT, &hints, &servinfo)) != 0) { fprintf(stderr, "getaddrinfo: %s\n", gai_strerror(rv)); return 1; } // loop through all the results and bind to the first we can for(p = servinfo; p != NULL; p = p->ai_next) { if ((sockfd = socket(p->ai_family, p->ai_socktype, p->ai_protocol)) == -1) { perror("listener: socket"); continue; } int yes=1; // lose the pesky "Address already in use" error message if (setsockopt(sockfd,SOL_SOCKET,SO_REUSEADDR,&yes,sizeof(int)) == -1) { perror("setsockopt"); exit(1); } if (bind(sockfd, p->ai_addr, p->ai_addrlen) == -1) { close(sockfd); perror("listener: bind"); continue; } if (listen(sockfd,backlog) == -1){ close(sockfd); perror("listener:listen"); continue; } break; } if (p == NULL) { fprintf(stderr, "listener: failed to bind socket\n"); return 2; } freeaddrinfo(servinfo); printf("listener: waiting to recv..\n"); while(1){ addr_size = sizeof their_addr; if ((new_fd = accept(sockfd, (struct sockaddr *)&their_addr, &addr_size))==-1){ perror("accept"); exit(1); } if ((numbytes = recv(new_fd, buf, MAXBUFLEN-1 , 0) == -1)) { perror("recv"); exit(1); } printf("listener: got packet from %s\n", inet_ntop(their_addr.ss_family, get_in_addr((struct sockaddr *)&their_addr), s, sizeof s)); printf("listener: packet is %d bytes long\n", numbytes); buf[numbytes] = '\0'; printf("listener: packet contains \"%s\"\n", buf); close(sockfd); } return 0; } Upon executing the client, I get " send: Transport endpoint is not connected" and I'm not sure where I went wrong. Thanks.

  Read the article

• Cisco 881 losing NAT NVI translation config after reload

  - by MasterRoot24

  This is a weird one, so I'll try to explain in as much detail as I can so I'm giving the whole picture. As I've mentioned in my other questions, I'm in the process of setting up a new Cisco 881 as my WAN router and NAT firewall. I'm facing an issue where NAT NVI rules that I have configured are not enabled after a reload of the router, regardless of the fact that they are present in the startup-config. In order to clarify this a little, here's the relevant section of my current running-config: Router1#show running-config | include nat source ip nat source list 1 interface FastEthernet4 overload ip nat source list 2 interface FastEthernet4 overload ip nat source static tcp 192.168.1.x 1723 interface FastEthernet4 1723 ip nat source static tcp 192.168.1.x 80 interface FastEthernet4 80 ip nat source static tcp 192.168.1.x 443 interface FastEthernet4 443 ip nat source static tcp 192.168.1.x 25 interface FastEthernet4 25 ip nat source static tcp 192.168.1.x 587 interface FastEthernet4 587 ip nat source static tcp 192.168.1.x 143 interface FastEthernet4 143 ip nat source static tcp 192.168.1.x 993 interface FastEthernet4 993 ...and here's the mappings 'in action': Router1#show ip nat nvi translations | include --- tcp <WAN IP>:25 192.168.1.x:25 --- --- tcp <WAN IP>:80 192.168.1.x:80 --- --- tcp <WAN IP>:143 192.168.1.x:143 --- --- tcp <WAN IP>:443 192.168.1.x:443 --- --- tcp <WAN IP>:587 192.168.1.x:587 --- --- tcp <WAN IP>:993 192.168.1.x:993 --- --- tcp <WAN IP>:1723 192.168.1.x:1723 --- --- ...and here's proof that the mappings are saved to startup-config: Router1#show startup-config | include nat source ip nat source list 1 interface FastEthernet4 overload ip nat source list 2 interface FastEthernet4 overload ip nat source static tcp 192.168.1.x 1723 interface FastEthernet4 1723 ip nat source static tcp 192.168.1.x 80 interface FastEthernet4 80 ip nat source static tcp 192.168.1.x 443 interface FastEthernet4 443 ip nat source static tcp 192.168.1.x 25 interface FastEthernet4 25 ip nat source static tcp 192.168.1.x 587 interface FastEthernet4 587 ip nat source static tcp 192.168.1.x 143 interface FastEthernet4 143 ip nat source static tcp 192.168.1.x 993 interface FastEthernet4 993 However, look what happens after a reload of the router: Router1#reload Proceed with reload? [confirm]Connection to router closed by remote host. Connection to router closed. $ ssh joe@router Password: Authorized Access only Router1>en Password: Router1#show ip nat nvi translations | include --- Router1# Router1#show ip nat translations | include --- tcp 188.222.181.173:25 192.168.1.2:25 --- --- tcp 188.222.181.173:80 192.168.1.2:80 --- --- tcp 188.222.181.173:143 192.168.1.2:143 --- --- tcp 188.222.181.173:443 192.168.1.2:443 --- --- tcp 188.222.181.173:587 192.168.1.2:587 --- --- tcp 188.222.181.173:993 192.168.1.2:993 --- --- tcp 188.222.181.173:1723 192.168.1.2:1723 --- --- Router1# Here's proof that the running config should have the mappings setup as NVI: Router1#show running-config | include nat source ip nat source list 1 interface FastEthernet4 overload ip nat source list 2 interface FastEthernet4 overload ip nat source static tcp 192.168.1.2 1723 interface FastEthernet4 1723 ip nat source static tcp 192.168.1.2 80 interface FastEthernet4 80 ip nat source static tcp 192.168.1.2 443 interface FastEthernet4 443 ip nat source static tcp 192.168.1.2 25 interface FastEthernet4 25 ip nat source static tcp 192.168.1.2 587 interface FastEthernet4 587 ip nat source static tcp 192.168.1.2 143 interface FastEthernet4 143 ip nat source static tcp 192.168.1.2 993 interface FastEthernet4 993 At this point, the mappings are not working (inbound connections from WAN on the HTTP/IMAP fail). I presume that this is because my interfaces are using ip nat enable for use with NVI mappings, instead of ip nat inside/outside. So, I re-apply the mappings: Router1#configure ter Router1#configure terminal Enter configuration commands, one per line. End with CNTL/Z. Router1(config)#ip nat source static tcp 192.168.1.2 1723 interface FastEthernet4 1723 Router1(config)#ip nat source static tcp 192.168.1.2 80 interface FastEthernet4 80 Router1(config)#ip nat source static tcp 192.168.1.2 443 interface FastEthernet4 443 Router1(config)#ip nat source static tcp 192.168.1.2 25 interface FastEthernet4 25 Router1(config)#ip nat source static tcp 192.168.1.2 587 interface FastEthernet4 587 Router1(config)#ip nat source static tcp 192.168.1.2 143 interface FastEthernet4 143 Router1(config)#ip nat source static tcp 192.168.1.2 993 interface FastEthernet4 993 Router1(config)#end ... then they show up correctly: Router1#show ip nat nvi translations | include --- tcp 188.222.181.173:25 192.168.1.2:25 --- --- tcp 188.222.181.173:80 192.168.1.2:80 --- --- tcp 188.222.181.173:143 192.168.1.2:143 --- --- tcp 188.222.181.173:443 192.168.1.2:443 --- --- tcp 188.222.181.173:587 192.168.1.2:587 --- --- tcp 188.222.181.173:993 192.168.1.2:993 --- --- tcp 188.222.181.173:1723 192.168.1.2:1723 --- --- Router1# Router1#show ip nat translations | include --- Router1# ... furthermore, now from both WAN and LAN, the services mapped above now work until the next reload. All of the above is required every time I have to reload the router (which is all too often at the moment :-( ). Here's my full current config: ! ! Last configuration change at 20:20:15 UTC Tue Dec 11 2012 by xxx version 15.2 no service pad service timestamps debug datetime msec service timestamps log datetime msec service password-encryption ! hostname xxx ! boot-start-marker boot-end-marker ! ! enable secret 4 xxxx ! aaa new-model ! ! aaa authentication login local_auth local ! ! ! ! ! aaa session-id common ! memory-size iomem 10 ! crypto pki trustpoint TP-self-signed-xxx enrollment selfsigned subject-name cn=IOS-Self-Signed-Certificate-xxx revocation-check none rsakeypair TP-self-signed-xxx ! ! crypto pki certificate chain TP-self-signed-xxx certificate self-signed 01 xxx quit ip gratuitous-arps ip auth-proxy max-login-attempts 5 ip admission max-login-attempts 5 ! ! ! ! ! ip domain list dmz.xxx.local ip domain list xxx.local ip domain name dmz.xxx.local ip name-server 192.168.1.x ip cef login block-for 3 attempts 3 within 3 no ipv6 cef ! ! multilink bundle-name authenticated license udi pid CISCO881-SEC-K9 sn xxx ! ! username admin privilege 15 secret 4 xxx username joe secret 4 xxx ! ! ! ! ! ip ssh time-out 60 ! ! ! ! ! ! ! ! ! interface FastEthernet0 no ip address ! interface FastEthernet1 no ip address ! interface FastEthernet2 no ip address ! interface FastEthernet3 switchport access vlan 2 no ip address ! interface FastEthernet4 ip address dhcp ip access-group 101 in ip nat enable duplex auto speed auto ! interface Vlan1 ip address 192.168.1.x 255.255.255.0 no ip redirects no ip unreachables no ip proxy-arp ip nat enable ! interface Vlan2 ip address 192.168.0.x 255.255.255.0 ! ip forward-protocol nd ip http server ip http access-class 1 ip http authentication local ip http secure-server ! ! ip nat source list 1 interface FastEthernet4 overload ip nat source list 2 interface FastEthernet4 overload ip nat source static tcp 192.168.1.x 1723 interface FastEthernet4 1723 ! ! access-list 1 permit 192.168.0.0 0.0.0.255 access-list 2 permit 192.168.1.0 0.0.0.255 access-list 101 permit udp 193.x.x.0 0.0.0.255 any eq 5060 access-list 101 deny udp any any eq 5060 access-list 101 permit ip any any ! ! ! ! control-plane ! ! banner motd Authorized Access only ! line con 0 exec-timeout 15 0 login authentication local_auth line aux 0 exec-timeout 15 0 login authentication local_auth line vty 0 4 access-class 2 in login authentication local_auth length 0 transport input all ! ! end I'd appreciate it greatly if anyone can help me find out why these mappings are not setup correctly using the saved config after a reload.

  Read the article

• Varnish "FetchError no backend connection" error

  - by clueless-anon

  Varnishlog: 0 CLI - Rd ping 0 CLI - Wr 200 19 PONG 1340829925 1.0 12 SessionOpen c 79.124.74.11 3063 :80 12 SessionClose c EOF 12 StatSess c 79.124.74.11 3063 0 1 0 0 0 0 0 0 0 CLI - Rd ping 0 CLI - Wr 200 19 PONG 1340829928 1.0 0 CLI - Rd ping 0 CLI - Wr 200 19 PONG 1340829931 1.0 12 SessionOpen c 108.62.115.226 46211 :80 12 ReqStart c 108.62.115.226 46211 467185881 12 RxRequest c GET 12 RxURL c / 12 RxProtocol c HTTP/1.0 12 RxHeader c User-Agent: Pingdom.com_bot_version_1.4_(http://www.pingdom.com/) 12 RxHeader c Host: www.mysite.com 12 VCL_call c recv lookup 12 VCL_call c hash 12 Hash c / 12 Hash c www.mysite.com 12 VCL_return c hash 12 VCL_call c miss fetch 12 FetchError c no backend connection 12 VCL_call c error deliver 12 VCL_call c deliver deliver 12 TxProtocol c HTTP/1.1 12 TxStatus c 503 12 TxResponse c Service Unavailable 12 TxHeader c Server: Varnish 12 TxHeader c Content-Type: text/html; charset=utf-8 12 TxHeader c Retry-After: 5 12 TxHeader c Content-Length: 418 12 TxHeader c Accept-Ranges: bytes 12 TxHeader c Date: Wed, 27 Jun 2012 20:45:31 GMT 12 TxHeader c X-Varnish: 467185881 12 TxHeader c Age: 1 12 TxHeader c Via: 1.1 varnish 12 TxHeader c Connection: close 12 Length c 418 12 ReqEnd c 467185881 1340829931.192433119 1340829931.891024113 0.000051022 0.698516846 0.000074035 12 SessionClose c error 12 StatSess c 108.62.115.226 46211 1 1 1 0 0 0 256 418 0 CLI - Rd ping 0 CLI - Wr 200 19 PONG 1340829934 1.0 0 CLI - Rd ping 0 CLI - Wr 200 19 PONG 1340829937 1.0 netstat -tlnp Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 0.0.0.0:8080 0.0.0.0:* LISTEN 3086/nginx tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 1915/varnishd tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 1279/sshd tcp 0 0 127.0.0.2:25 0.0.0.0:* LISTEN 3195/sendmail: MTA: tcp 0 0 127.0.0.2:6082 0.0.0.0:* LISTEN 1914/varnishd tcp 0 0 127.0.0.2:9000 0.0.0.0:* LISTEN 1317/php-fpm.conf) tcp 0 0 127.0.0.2:3306 0.0.0.0:* LISTEN 1192/mysqld tcp 0 0 127.0.0.2:587 0.0.0.0:* LISTEN 3195/sendmail: MTA: tcp 0 0 127.0.0.2:11211 0.0.0.0:* LISTEN 3072/memcached tcp6 0 0 :::8080 :::* LISTEN 3086/nginx tcp6 0 0 :::80 :::* LISTEN 1915/varnishd tcp6 0 0 :::22 :::* LISTEN 1279/sshd /etc/nginx/site-enabled/default server { listen 8080; ## listen for ipv4; this line is default and implied listen [::]:8080 default ipv6only=on; ## listen for ipv6 root /usr/share/nginx/www; index index.html index.htm index.php; # Make site accessible from http://localhost/ server_name localhost; location / { # First attempt to serve request as file, then # as directory, then fall back to index.html try_files $uri $uri/ /index.html; } location /doc { root /usr/share; autoindex on; allow 127.0.0.2; deny all; } location /images { root /usr/share; autoindex off; } #error_page 404 /404.html; # redirect server error pages to the static page /50x.html # #error_page 500 502 503 504 /50x.html; #location = /50x.html { # root /usr/share/nginx/www; #} # proxy the PHP scripts to Apache listening on 127.0.0.1:80 # #location ~ \.php$ { # proxy_pass http://127.0.0.1; #} # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000 # location ~ \.php$ { fastcgi_pass 127.0.0.2:9000; fastcgi_index index.php; include fastcgi_params; } # deny access to .htaccess files, if Apache's document root # concurs with nginx's one # #location ~ /\.ht { # deny all; #} } /etc/nginx/sites-enabled/www.mysite.com.vhost server { listen 8080; server_name www.mysite.com mysite.com.net; root /var/www/www.mysite.com/web; if ($http_host != "www.mysite.com") { rewrite ^ http://www.mysite.com$request_uri permanent; } index index.php index.html; location = /favicon.ico { log_not_found off; access_log off; } location = /robots.txt { allow all; log_not_found off; access_log off; } # Deny all attempts to access hidden files such as .htaccess, .htpasswd, .DS_Store (Mac). location ~ /\. { deny all; access_log off; log_not_found off; } location / { try_files $uri $uri/ /index.php?$args; } # Add trailing slash to */wp-admin requests. rewrite /wp-admin$ $scheme://$host$uri/ permanent; location ~* \.(jpg|jpeg|png|gif|css|js|ico)$ { expires max; log_not_found off; } location ~ \.php$ { try_files $uri =404; include /etc/nginx/fastcgi_params; fastcgi_pass 127.0.0.2:9000; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; } include /var/www/www.mysite.com/web/nginx.conf; location ~ /nginx.conf { deny all; access_log off; log_not_found off; } } /etc/varnish/default.vcl # This is a basic VCL configuration file for varnish. See the vcl(7) # man page for details on VCL syntax and semantics. # # Default backend definition. Set this to point to your content # server. # backend default { .host = "127.0.0.2"; .port = "8080"; # .connect_timeout = 600s; #.first_byte_timeout = 600s; # .between_bytes_timeout = 600s; # .max_connections = 800; Note: uncommenting the last four options at default.vcl made no difference. cat /etc/default/varnish # Configuration file for varnish # # /etc/init.d/varnish expects the variables $DAEMON_OPTS, $NFILES and $MEMLOCK # to be set from this shell script fragment. # # Should we start varnishd at boot? Set to "yes" to enable. START=yes # Maximum number of open files (for ulimit -n) NFILES=131072 # Maximum locked memory size (for ulimit -l) # Used for locking the shared memory log in memory. If you increase log size, # you need to increase this number as well MEMLOCK=82000 # Default varnish instance name is the local nodename. Can be overridden with # the -n switch, to have more instances on a single server. INSTANCE=$(uname -n) # This file contains 4 alternatives, please use only one. ## Alternative 1, Minimal configuration, no VCL # # Listen on port 6081, administration on localhost:6082, and forward to # content server on localhost:8080. Use a 1GB fixed-size cache file. # # DAEMON_OPTS="-a :6081 \ # -T localhost:6082 \ # -b localhost:8080 \ # -u varnish -g varnish \ # -S /etc/varnish/secret \ # -s file,/var/lib/varnish/$INSTANCE/varnish_storage.bin,1G" ## Alternative 2, Configuration with VCL # # Listen on port 6081, administration on localhost:6082, and forward to # one content server selected by the vcl file, based on the request. Use a 1GB # fixed-size cache file. # DAEMON_OPTS="-a :80 \ -T 127.0.0.2:6082 \ -f /etc/varnish/default.vcl \ -S /etc/varnish/secret \ -s file,/var/lib/varnish/$INSTANCE/varnish_storage.bin,1G" If you need any other info let me know. I am all out of clue as to whats the problem.

  Read the article

• ProFTPd server on Ubuntu getting access denied message when successfully authenticated?

  - by exxoid

  I have a Ubuntu box with a ProFTPD 1.3.4a Server, when I try to log in via my FTP Client I cannot do anything as it does not allow me to list directories; I have tried logging in as root and as a regular user and tried accessing different paths within the FTP Server. The error I get in my FTP Client is: Status: Retrieving directory listing... Command: CDUP Response: 250 CDUP command successful Command: PWD Response: 257 "/var" is the current directory Command: PASV Response: 227 Entering Passive Mode (172,16,4,22,237,205). Command: MLSD Response: 550 Access is denied. Error: Failed to retrieve directory listing Any idea? Here is the config of my proftpd: # # /etc/proftpd/proftpd.conf -- This is a basic ProFTPD configuration file. # To really apply changes, reload proftpd after modifications, if # it runs in daemon mode. It is not required in inetd/xinetd mode. # # Includes DSO modules Include /etc/proftpd/modules.conf # Set off to disable IPv6 support which is annoying on IPv4 only boxes. UseIPv6 off # If set on you can experience a longer connection delay in many cases. IdentLookups off ServerName "Drupal Intranet" ServerType standalone ServerIdent on "FTP Server ready" DeferWelcome on # Set the user and group that the server runs as User nobody Group nogroup MultilineRFC2228 on DefaultServer on ShowSymlinks on TimeoutNoTransfer 600 TimeoutStalled 600 TimeoutIdle 1200 DisplayLogin welcome.msg DisplayChdir .message true ListOptions "-l" DenyFilter \*.*/ # Use this to jail all users in their homes # DefaultRoot ~ # Users require a valid shell listed in /etc/shells to login. # Use this directive to release that constrain. # RequireValidShell off # Port 21 is the standard FTP port. Port 21 # In some cases you have to specify passive ports range to by-pass # firewall limitations. Ephemeral ports can be used for that, but # feel free to use a more narrow range. # PassivePorts 49152 65534 # If your host was NATted, this option is useful in order to # allow passive tranfers to work. You have to use your public # address and opening the passive ports used on your firewall as well. # MasqueradeAddress 1.2.3.4 # This is useful for masquerading address with dynamic IPs: # refresh any configured MasqueradeAddress directives every 8 hours <IfModule mod_dynmasq.c> # DynMasqRefresh 28800 </IfModule> # To prevent DoS attacks, set the maximum number of child processes # to 30. If you need to allow more than 30 concurrent connections # at once, simply increase this value. Note that this ONLY works # in standalone mode, in inetd mode you should use an inetd server # that allows you to limit maximum number of processes per service # (such as xinetd) MaxInstances 30 # Set the user and group that the server normally runs at. # Umask 022 is a good standard umask to prevent new files and dirs # (second parm) from being group and world writable. Umask 022 022 # Normally, we want files to be overwriteable. AllowOverwrite on # Uncomment this if you are using NIS or LDAP via NSS to retrieve passwords: # PersistentPasswd off # This is required to use both PAM-based authentication and local passwords AuthPAMConfig proftpd AuthOrder mod_auth_pam.c* mod_auth_unix.c # Be warned: use of this directive impacts CPU average load! # Uncomment this if you like to see progress and transfer rate with ftpwho # in downloads. That is not needed for uploads rates. # UseSendFile off TransferLog /var/log/proftpd/xferlog SystemLog /var/log/proftpd/proftpd.log # Logging onto /var/log/lastlog is enabled but set to off by default #UseLastlog on # In order to keep log file dates consistent after chroot, use timezone info # from /etc/localtime. If this is not set, and proftpd is configured to # chroot (e.g. DefaultRoot or <Anonymous>), it will use the non-daylight # savings timezone regardless of whether DST is in effect. #SetEnv TZ :/etc/localtime <IfModule mod_quotatab.c> QuotaEngine off </IfModule> <IfModule mod_ratio.c> Ratios off </IfModule> # Delay engine reduces impact of the so-called Timing Attack described in # http://www.securityfocus.com/bid/11430/discuss # It is on by default. <IfModule mod_delay.c> DelayEngine on </IfModule> <IfModule mod_ctrls.c> ControlsEngine off ControlsMaxClients 2 ControlsLog /var/log/proftpd/controls.log ControlsInterval 5 ControlsSocket /var/run/proftpd/proftpd.sock </IfModule> <IfModule mod_ctrls_admin.c> AdminControlsEngine off </IfModule> # # Alternative authentication frameworks # #Include /etc/proftpd/ldap.conf #Include /etc/proftpd/sql.conf # # This is used for FTPS connections # #Include /etc/proftpd/tls.conf # # Useful to keep VirtualHost/VirtualRoot directives separated # #Include /etc/proftpd/virtuals.con # A basic anonymous configuration, no upload directories. # <Anonymous ~ftp> # User ftp # Group nogroup # # We want clients to be able to login with "anonymous" as well as "ftp" # UserAlias anonymous ftp # # Cosmetic changes, all files belongs to ftp user # DirFakeUser on ftp # DirFakeGroup on ftp # # RequireValidShell off # # # Limit the maximum number of anonymous logins # MaxClients 10 # # # We want 'welcome.msg' displayed at login, and '.message' displayed # # in each newly chdired directory. # DisplayLogin welcome.msg # DisplayChdir .message # # # Limit WRITE everywhere in the anonymous chroot # <Directory *> # <Limit WRITE> # DenyAll # </Limit> # </Directory> # # # Uncomment this if you're brave. # # <Directory incoming> # # # Umask 022 is a good standard umask to prevent new files and dirs # # # (second parm) from being group and world writable. # # Umask 022 022 # # <Limit READ WRITE> # # DenyAll # # </Limit> # # <Limit STOR> # # AllowAll # # </Limit> # # </Directory> # # </Anonymous> # Include other custom configuration files Include /etc/proftpd/conf.d/ UseReverseDNS off <Global> RootLogin on UseFtpUsers on ServerIdent on DefaultChdir /var/www DeleteAbortedStores on LoginPasswordPrompt on AccessGrantMsg "You have been authenticated successfully." </Global> Any idea what could be wrong? Thanks for your help!

  Read the article

• vmware nat internet connection

  - by ziftech

  Host: Windows Server 2008 / VMWare Server 2 Has Internet connection ip: 172.17.62.1 (NAT adapter) no gateway, no dns Guest: Windows Server 2003 ip: 172.17.62.2 (NAT) gateway 172.17.62.5 (set in VMware network manager for NAT) Host and guest can see each other, but guest have no internet connection (only ping by ip) In what may be the problem? HOST Ethernet adapter VMware Network Adapter VMnet8: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : VMware Virtual Ethernet Adapter for VMnet8 Physical Address. . . . . . . . . : 00-50-56-C0-00-08 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::f1c1:3518:abb4:c05%24(Preferred) IPv4 Address. . . . . . . . . . . : 172.17.67.1(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : DHCPv6 IAID . . . . . . . . . . . : 486559830 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-13-CF-8C-9F-40-61-86-2B-8F-AD DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1 fec0:0:0:ffff::2%1 fec0:0:0:ffff::3%1 NetBIOS over Tcpip. . . . . . . . : Enabled GUEST DNS-suffix . . : Description. . . . . . . . . . . . : VMware Accelerated AMD PCNet Adapter Physical. . . . . . . . . : 00-0C-29-71-A5-43 DHCP . . . . . . . . . . . : no ip . . . . . . . . . . . . : 172.17.67.2 subnet mask . . . . . . . . . . : 255.255.255.0 gateway . . . . . . . . . . : 172.17.67.5 DNS . . . . . . . . . . . . : 8.8.8.8 All firewalls are down, I can ping hosts, but no telnet connection - telnet google.com 80

  Read the article

• cannot access a site from Mac OSX Lion but can from other machines on network?

  - by house9

  SOLVED: The issue is with the hamachi client, hamachi is hi-jacking all of the 5.0.0.0/8 address block http://en.wikipedia.org/wiki/Hamachi_(software)#Criticism http://b.logme.in/2012/11/07/changes-to-hamachi-on-november-19th/ The fix on Mac LogMeIn Hamachi Preferences Settings Advanced Peer Connections IP protocol mode IPv6 only (default is both) If you can only connect to some of your network over IPv4 this 'fix' will NOT work for you ----- A few weeks ago I started using a service - https://semaphoreapp.com I think they made DNS changes a week ago and ever since I cannot access the site from my Mac OSX Lion (10.7.4) machine (my main development machine) but I can access the site from other machines on my network ipad windows machine MacMini (10.6.8) After some google searching I tried both of these dscacheutil -flushcache sudo killall -HUP mDNSResponder but no go, I've contacted semaphoreapp as well, but nothing so far - also of interest, one of my colleagues has the exact same problem, cannot access via Mac OSX Lion but can via windows machine, we work remotely and are not on the same ISP some additional info Lion (10.7.4) cannot access site host semaphoreapp.com semaphoreapp.com has address 5.9.53.16 ping semaphoreapp.com PING semaphoreapp.com (5.9.53.16): 56 data bytes Request timeout for icmp_seq 0 Request timeout for icmp_seq 1 Request timeout for icmp_seq 2 Request timeout for icmp_seq 3 ping: sendto: No route to host Request timeout for icmp_seq 4 ping: sendto: Host is down Request timeout for icmp_seq 5 ping: sendto: Host is down Request timeout for icmp_seq 6 ping: sendto: Host is down Request timeout for icmp_seq 7 .... traceroute semaphoreapp.com traceroute to semaphoreapp.com (5.9.53.16), 64 hops max, 52 byte packets 1 * * * 2 * * * traceroute: sendto: No route to host 3 traceroute: wrote semaphoreapp.com 52 chars, ret=-1 *traceroute: sendto: Host is down traceroute: wrote semaphoreapp.com 52 chars, ret=-1 .... and MacMini (10.6.8) can access it host semaphoreapp.com semaphoreapp.com has address 5.9.53.16 ping semaphoreapp.com PING semaphoreapp.com (5.9.53.16): 56 data bytes 64 bytes from 5.9.53.16: icmp_seq=0 ttl=44 time=191.458 ms 64 bytes from 5.9.53.16: icmp_seq=1 ttl=44 time=202.923 ms 64 bytes from 5.9.53.16: icmp_seq=2 ttl=44 time=180.746 ms 64 bytes from 5.9.53.16: icmp_seq=3 ttl=44 time=200.616 ms 64 bytes from 5.9.53.16: icmp_seq=4 ttl=44 time=178.818 ms .... traceroute semaphoreapp.com traceroute to semaphoreapp.com (5.9.53.16), 64 hops max, 52 byte packets 1 192.168.0.1 (192.168.0.1) 1.677 ms 1.446 ms 1.445 ms 2 * LOCAL ISP 11.957 ms * 3 etc... 10.704 ms 14.183 ms 9.341 ms 4 etc... 32.641 ms 12.147 ms 10.850 ms 5 etc.... 44.205 ms 54.563 ms 36.243 ms 6 vlan139.car1.seattle1.level3.net (4.53.145.165) 50.136 ms 45.873 ms 30.396 ms 7 ae-32-52.ebr2.seattle1.level3.net (4.69.147.182) 31.926 ms 40.507 ms 49.993 ms 8 ae-2-2.ebr2.denver1.level3.net (4.69.132.54) 78.129 ms 59.674 ms 49.905 ms 9 ae-3-3.ebr1.chicago2.level3.net (4.69.132.62) 99.019 ms 82.008 ms 76.074 ms 10 ae-1-100.ebr2.chicago2.level3.net (4.69.132.114) 96.185 ms 75.658 ms 75.662 ms 11 ae-6-6.ebr2.washington12.level3.net (4.69.148.145) 104.322 ms 105.563 ms 118.480 ms 12 ae-5-5.ebr2.washington1.level3.net (4.69.143.221) 93.646 ms 99.423 ms 96.067 ms 13 ae-41-41.ebr2.paris1.level3.net (4.69.137.49) 177.744 ms ae-44-44.ebr2.paris1.level3.net (4.69.137.61) 199.363 ms 198.405 ms 14 ae-47-47.ebr1.frankfurt1.level3.net (4.69.143.141) 176.876 ms ae-45-45.ebr1.frankfurt1.level3.net (4.69.143.133) 170.994 ms ae-46-46.ebr1.frankfurt1.level3.net (4.69.143.137) 177.308 ms 15 ae-61-61.csw1.frankfurt1.level3.net (4.69.140.2) 176.769 ms ae-91-91.csw4.frankfurt1.level3.net (4.69.140.14) 178.676 ms 173.644 ms 16 ae-2-70.edge7.frankfurt1.level3.net (4.69.154.75) 180.407 ms ae-3-80.edge7.frankfurt1.level3.net (4.69.154.139) 174.861 ms 176.578 ms 17 as33891-net.edge7.frankfurt1.level3.net (195.16.162.94) 175.448 ms 185.658 ms 177.081 ms 18 hos-bb1.juniper4.rz16.hetzner.de (213.239.240.202) 188.700 ms 190.332 ms 188.196 ms 19 hos-tr4.ex3k14.rz16.hetzner.de (213.239.233.98) 199.632 ms hos-tr3.ex3k14.rz16.hetzner.de (213.239.233.66) 185.938 ms hos-tr2.ex3k14.rz16.hetzner.de (213.239.230.34) 182.378 ms 20 * * * 21 * * * 22 * * * any ideas? EDIT: adding tcpdump MacMini (which can connect) while running - ping semaphoreapp.com sudo tcpdump -v -i en0 dst semaphoreapp.com Password: tcpdump: listening on en0, link-type EN10MB (Ethernet), capture size 65535 bytes 17:33:03.337165 IP (tos 0x0, ttl 64, id 20153, offset 0, flags [none], proto ICMP (1), length 84, bad cksum 0 (->3129)!) 192.168.0.6 > static.16.53.9.5.clients.your-server.de: ICMP echo request, id 61918, seq 0, length 64 17:33:04.337279 IP (tos 0x0, ttl 64, id 26049, offset 0, flags [none], proto ICMP (1), length 84, bad cksum 0 (->1a21)!) 192.168.0.6 > static.16.53.9.5.clients.your-server.de: ICMP echo request, id 61918, seq 1, length 64 17:33:05.337425 IP (tos 0x0, ttl 64, id 47854, offset 0, flags [none], proto ICMP (1), length 84, bad cksum 0 (->c4f3)!) 192.168.0.6 > static.16.53.9.5.clients.your-server.de: ICMP echo request, id 61918, seq 2, length 64 17:33:06.337548 IP (tos 0x0, ttl 64, id 24772, offset 0, flags [none], proto ICMP (1), length 84, bad cksum 0 (->1f1e)!) 192.168.0.6 > static.16.53.9.5.clients.your-server.de: ICMP echo request, id 61918, seq 3, length 64 17:33:07.337670 IP (tos 0x0, ttl 64, id 8171, offset 0, flags [none], proto ICMP (1), length 84, bad cksum 0 (->5ff7)!) 192.168.0.6 > static.16.53.9.5.clients.your-server.de: ICMP echo request, id 61918, seq 4, length 64 17:33:08.337816 IP (tos 0x0, ttl 64, id 35810, offset 0, flags [none], proto ICMP (1), length 84, bad cksum 0 (->f3ff)!) 192.168.0.6 > static.16.53.9.5.clients.your-server.de: ICMP echo request, id 61918, seq 5, length 64 17:33:09.337948 IP (tos 0x0, ttl 64, id 31120, offset 0, flags [none], proto ICMP (1), length 84, bad cksum 0 (->652)!) 192.168.0.6 > static.16.53.9.5.clients.your-server.de: ICMP echo request, id 61918, seq 6, length 64 ^C 7 packets captured 1047 packets received by filter 0 packets dropped by kernel OSX Lion (cannot connect) while running - ping semaphoreapp.com # wireless ~ $ sudo tcpdump -v -i en1 dst semaphoreapp.com Password: tcpdump: listening on en1, link-type EN10MB (Ethernet), capture size 65535 bytes ^C 0 packets captured 262 packets received by filter 0 packets dropped by kernel and # wired ~ $ sudo tcpdump -v -i en0 dst semaphoreapp.com tcpdump: listening on en0, link-type EN10MB (Ethernet), capture size 65535 bytes ^C 0 packets captured 219 packets received by filter 0 packets dropped by kernel above output after Request timeout for icmp_seq 25 or 30 times from ping. I don't know much about tcpdump, but to me it doesn't seem like the ping requests are leaving my machine?

  Read the article

• Nginx 500 Internal Server error on subdirectory

  - by juyoung518

  I'm getting a 500 Internal Server error only on sub directories. For example, If my website is example.com, example.com/index.php works. But example.com/phpbb/index.php doesn't work. It just turns up a blank php page. The HTTP header shows HTTP error 500 Internal Server error. If I enter example.com/phpbb/index.php/somedirectory, the index.php of my root directory shows up. This is all very strange. I have tried searching etc but nothing worked. tried re-installing nginx but not fixed. I'm sure I got the DNS configured right. My Nginx Config /sites-available/example.com server { server_name www.example.com; return 301 https://example.com$request_uri; } server { listen 443; listen 80; #listen 80; ## listen for ipv4; this line is default and implied #listen [::]:80 default_server ipv6only=on; ## listen for ipv6 root /var/www/example.com/public_html; index index.html index.php index.htm; ssl on; ssl_certificate /etc/nginx/ssl/cert.pem; ssl_certificate_key /etc/nginx/ssl/ssl.key; ssl_session_timeout 5m; ssl_protocols TLSv1 TLSv1.1 TLSv1.2; ssl_ciphers ECDH+AESGCM:DH+AESGCM:ECDH+AES256:DH+AES256:ECDH+AES128:DH+AES:ECDH+3DES:DH+3DES:RSA+AESGCM:RSA+AES:RSA+3DES:!aNULL:!MD5:!DSS; ssl_prefer_server_ciphers on; ssl_stapling on; resolver 8.8.8.8; add_header Strict-Transport-Security max-age=63072000; # Make site accessible from http://localhost/ server_name example.com; location ~* \.(jpg|jpeg|png|gif|ico|css|js|bmp)$ { expires 365d; add_header Cache-Control public; } if ($scheme = http) { return 301 https://example.com$request_uri; } location / { # First attempt to serve request as file, then # as directory, then fall back to displaying a 404. try_files $uri $uri/ /index.php; # Uncomment to enable naxsi on this location # include /etc/nginx/naxsi.rules } if ($http_user_agent ~ (musobot|screenshot|AhrefsBot|picsearch|Gender|HostTracker|Java/1.7.0_51|Java) ) { return 403; } location /phpmyadmin { root /usr/share/; index index.php index.html index.htm; location ~ ^/phpmyadmin/(.+\.php)$ { try_files $uri =404; root /usr/share/; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include /etc/nginx/fastcgi_params; } location ~* ^/phpmyadmin/(.+\.(jpg|jpeg|gif|css|png|js|ico|html|xml|txt))$ { root /usr/share/; } } location /phpMyAdmin { rewrite ^/* /phpmyadmin last; } location /doc/ { alias /usr/share/doc/; autoindex on; allow 127.0.0.1; allow ::1; deny all; } # Only for nginx-naxsi used with nginx-naxsi-ui : process denied requests #location /RequestDenied { # proxy_pass http://127.0.0.1:8080; #} #error_page 404 /404.html; # redirect server error pages to the static page /50x.html # error_page 500 502 503 504 /50x.html; location = /50x.html { root /usr/share/nginx/www; } # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000 # location ~ \.php$ { try_files $uri =404; fastcgi_split_path_info ^(.+\.php)(/.+)$; # NOTE: You should have "cgi.fix_pathinfo = 0;" in php.ini # With php5-cgi alone: fastcgi_pass 127.0.0.1:9000; # With php5-fpm: #fastcgi_pass unix:/var/run/php5-fpm.sock; fastcgi_index index.php; include /etc/nginx/fastcgi_params; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; fastcgi_buffer_size 128k; fastcgi_buffers 256 16k; fastcgi_busy_buffers_size 256k; fastcgi_temp_file_write_size 256k; fastcgi_read_timeout 240; # deny access to .htaccess files, if Apache's document root # concurs with nginx's one # location ~ /\.ht { deny all; } } } nginx.conf user www-data; worker_processes 1; pid /var/run/nginx.pid; events { worker_connections 768; # multi_accept on; } http { ## Block spammers and other unwanted visitors ## include /etc/nginx/blockips.conf; fastcgi_cache_path /var/cache/nginx levels=1:2 keys_zone=microcache:10m max_size=1000m inactive=60m; ## # Basic Settings ## sendfile on; tcp_nopush on; tcp_nodelay on; keepalive_timeout 100; types_hash_max_size 2048; server_tokens off; # server_names_hash_bucket_size 64; # server_name_in_redirect off; include /etc/nginx/mime.types; default_type application/octet-stream; ## # Logging Settings ## access_log off; error_log /var/log/nginx/error.log; ssl_session_cache shared:SSL:10m; ssl_session_timeout 10m; ssl_ciphers ECDH+AESGCM:DH+AESGCM:ECDH+AES256:DH+AES256:ECDH+AES128:DH+AES:ECDH+3DES:DH+3DES:RSA+AESGCM:RSA+AES:RSA+3DES:!aNULL:!MD5:!DSS; ssl_prefer_server_ciphers on; ## # File Cache Settings ## open_file_cache max=5000 inactive=5m; open_file_cache_valid 2m; open_file_cache_min_uses 1; open_file_cache_errors on; ## # Gzip Settings ## gzip on; gzip_disable "msie6"; gzip_vary on; gzip_proxied any; gzip_comp_level 6; gzip_buffers 16 8k; gzip_http_version 1.1; gzip_types text/plain text/x-js text/css application/json application/x-javascript text/xml application/xml application/xml+rss text/javascript; ## # nginx-naxsi config ## # Uncomment it if you installed nginx-naxsi ## #include /etc/nginx/naxsi_core.rules; ## # nginx-passenger config ## # Uncomment it if you installed nginx-passenger ## #passenger_root /usr; #passenger_ruby /usr/bin/ruby; ## # Virtual Host Configs ## include /etc/nginx/conf.d/*.conf; include /etc/nginx/sites-enabled/*;

  Read the article

• "Can't Connect to Server" from 2nd virtual host on VPS

  - by chaoskreator

  I'm using Debian 7 Wheezy and Apache 2.2.22, and I'm setting up Virtual Hosts for a number of websites on my VPS. I've successfully configured the VirtualHost directives for one of the sites, but the second one continually gives "Problem Loading Page" in Firefox. I've run configtest and it has verified all my syntax is correct, and I've checked all the permissions. Everything on the 2nd domain is pretty much copy/pasted from the first, so I'm not sure what the issue is, as there are no entries into /var/log/apache2/error.log other than where I have reloaded the configurations: /# cat /var/log/apache2/error.log [Thu May 29 01:19:00 2014] [notice] Graceful restart requested, doing restart [Thu May 29 01:19:00 2014] [info] Init: Seeding PRNG with 656 bytes of entropy [Thu May 29 01:19:00 2014] [info] Init: Generating temporary RSA private keys (512/1024 bits) [Thu May 29 01:19:00 2014] [info] Init: Generating temporary DH parameters (512/1024 bits) [Thu May 29 01:19:00 2014] [debug] ssl_scache_shmcb.c(253): shmcb_init allocated 512000 bytes of shared memory [Thu May 29 01:19:00 2014] [debug] ssl_scache_shmcb.c(272): for 511920 bytes (512000 including header), recommending 32 subcaches, 133 indexes each [Thu May 29 01:19:00 2014] [debug] ssl_scache_shmcb.c(306): shmcb_init_memory choices follow [Thu May 29 01:19:00 2014] [debug] ssl_scache_shmcb.c(308): subcache_num = 32 [Thu May 29 01:19:00 2014] [debug] ssl_scache_shmcb.c(310): subcache_size = 15992 [Thu May 29 01:19:00 2014] [debug] ssl_scache_shmcb.c(312): subcache_data_offset = 3208 [Thu May 29 01:19:00 2014] [debug] ssl_scache_shmcb.c(314): subcache_data_size = 12784 [Thu May 29 01:19:00 2014] [debug] ssl_scache_shmcb.c(316): index_num = 133 [Thu May 29 01:19:00 2014] [info] Shared memory session cache initialised [Thu May 29 01:19:00 2014] [info] Init: Initializing (virtual) servers for SSL [Thu May 29 01:19:00 2014] [info] mod_ssl/2.2.22 compiled against Server: Apache/2.2.22, Library: OpenSSL/1.0.1e [Thu May 29 01:19:00 2014] [notice] Apache/2.2.22 (Debian) PHP/5.4.4-14+deb7u9 mod_ssl/2.2.22 OpenSSL/1.0.1e mod_perl/2.0.7 Perl/v5.14.2 configured -- resuming normal operations [Thu May 29 01:19:00 2014] [info] Server built: Mar 4 2013 22:05:16 [Thu May 29 01:19:00 2014] [debug] prefork.c(1023): AcceptMutex: sysvsem (default: sysvsem) I've ensured to enable each vhost with a2ensite {sitename.conf} with no errors there, either. Below are the contents of the configuration files... /etc/apache2/apache2.conf # Global configuration # LockFile ${APACHE_LOCK_DIR}/accept.lock PidFile ${APACHE_PID_FILE} Timeout 300 KeepAlive On MaxKeepAliveRequests 100 KeepAliveTimeout 5 ## ## Server-Pool Size Regulation (MPM specific) ## # prefork MPM # StartServers: number of server processes to start # MinSpareServers: minimum number of server processes which are kept spare # MaxSpareServers: maximum number of server processes which are kept spare # MaxClients: maximum number of server processes allowed to start # MaxRequestsPerChild: maximum number of requests a server process serves <IfModule mpm_prefork_module> StartServers 5 MinSpareServers 5 MaxSpareServers 10 MaxClients 150 MaxRequestsPerChild 0 </IfModule> # worker MPM # StartServers: initial number of server processes to start # MinSpareThreads: minimum number of worker threads which are kept spare # MaxSpareThreads: maximum number of worker threads which are kept spare # ThreadLimit: ThreadsPerChild can be changed to this maximum value during a # graceful restart. ThreadLimit can only be changed by stopping # and starting Apache. # ThreadsPerChild: constant number of worker threads in each server process # MaxClients: maximum number of simultaneous client connections # MaxRequestsPerChild: maximum number of requests a server process serves <IfModule mpm_worker_module> StartServers 2 MinSpareThreads 25 MaxSpareThreads 75 ThreadLimit 64 ThreadsPerChild 25 MaxClients 150 MaxRequestsPerChild 0 </IfModule> # event MPM # StartServers: initial number of server processes to start # MinSpareThreads: minimum number of worker threads which are kept spare # MaxSpareThreads: maximum number of worker threads which are kept spare # ThreadsPerChild: constant number of worker threads in each server process # MaxClients: maximum number of simultaneous client connections # MaxRequestsPerChild: maximum number of requests a server process serves <IfModule mpm_event_module> StartServers 2 MinSpareThreads 25 MaxSpareThreads 75 ThreadLimit 64 ThreadsPerChild 25 MaxClients 150 MaxRequestsPerChild 0 </IfModule> # These need to be set in /etc/apache2/envvars User ${APACHE_RUN_USER} Group ${APACHE_RUN_GROUP} # # AccessFileName: The name of the file to look for in each directory # for additional configuration directives. See also the AllowOverride # directive. # AccessFileName .htaccess # # The following lines prevent .htaccess and .htpasswd files from being # viewed by Web clients. # <Files ~ "^\.ht"> Order allow,deny Deny from all Satisfy all </Files> DefaultType None HostnameLookups Off ErrorLog ${APACHE_LOG_DIR}/error.log LogLevel debug # Include module configuration: Include mods-enabled/*.load Include mods-enabled/*.conf # Include list of ports to listen on and which to use for name based vhosts Include ports.conf # # The following directives define some format nicknames for use with # a CustomLog directive (see below). # If you are behind a reverse proxy, you might want to change %h into %{X-Forwarded-For}i # # LogFormat "%v:%p %h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" vhost_combined LogFormat "%h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %O" common LogFormat "%{Referer}i -> %U" referer LogFormat "%{User-agent}i" agent <Directory "/var/www"> Order allow,deny Allow from all Require all granted </Directory> # Include generic snippets of statements Include conf.d/ # Include the virtual host configurations: Include sites-enabled/*.conf NameVirtualHost *:80 /etc/apache2/sites-available/site1.net.conf <VirtualHost *:80> ServerName site1.net ServerAlias site1.net *.site1.net DocumentRoot "/var/www/site1" ErrorLog "/var/www/site1/logs/error.log" CustomLog "/var/www/site1/logs/access.log" vhost_combined <Directory "/var/www/site1"> Options None AllowOverride All Order allow,deny Allow from all Satisfy Any </Directory> </VirtualHost> /etc/apache2/sites-available/site2.com.conf <VirtualHost *:80> ServerName site2.com ServerAlias site2.com *.site2.com DocumentRoot "/var/www/site2" ErrorLog "/var/www/site2/logs/error.log" CustomLog "/var/www/site2/logs/access.log" vhost_combined <Directory "/var/www/site2"> Options None AllowOverride All Order allow,deny Allow from all Satisfy Any </Directory> </VirtualHost> I've also tried setting NameVirtualHost like: Listen 80 NameVirtualHost 23.88.121.82:80 NameVirtualHost 127.0.0.1:80 and the VirtualHost Directives: <VirtualHost 23.88.121.82:80> ... </VirtualHost> for both sites, but that causes the first site to fail, as well. I'm wondering if I need to set up individual IPs for each site, possibly? I have 2 more IPv4 and 3 IPv6 addresses available, if that would make a difference. Also, in the grand scheme of things, I will need to enable SSL for the first site. I've been reading that I'll need to basically just mimic the directives for listening on port 80, only on port 443, and make sure mod_ssl is enabled? EDIT: I just ran apache2 -t to test the config files that way, and got the error: apache2: bad user name ${APACHE_RUN_USER}. However, apachectl configtest returns Syntax OK. There are no other mentions of errors with the mutex anywhere else, however. I was pretty sure if there was an error with the user apache was supposed to run under, the server wouldn't start at all... EDIT 2: Restarting apache fixed the bad user name error.

  Read the article

• Windows 7 intermittently drops wired internet/lan connection.

  - by CraigTP

  In a nutshell, my Windows 7 Ultimate PC intermittently drops it's internet connection. Why? Background: My PC is wired to my ADSL modem/router which is directly connected to the phone line. I also have wireless connectivity turned on within the router for a laptop to connect wirelessly. Every few hours or so, when using my PC, I find I cannot access the internet and pages will not load. Eventually, Windows7 will update the network icon in the task-tray to show the exclamation mark symbol on the network icon. Opening up the Network And Sharing Centre will show the red cross between the "Multiple Networks" and "The Internet". Here's a picture of the "Network And Sharing Centre" (grabbed when everything was working!) As you can see, I'm running Sun's VirtualBox on this machine and that creates a Network connection for itself. This doesn't seem to affect the intermittent dropping (i.e. the intermittent drops occur whether the VirtualBox connection is in use or not). When the connection does drop, I cannot access any internet pages, nor can I access the router's web admin page at http://192.168.1.1/, so I'm assuming I've lost all local LAN access too. It's definitely not the router (or the internet connection itself) as my laptop, using the wireless connection (and running Vista Home Premium) continues to be able to access the internet (and the router's web admin pages) just fine. Every time this happens, I can immediately restore all internet and LAN access by opening Network Adapter page, disabling the "Local Area Connection" and then re-enabling it. Give it a few seconds and everything is fine again. I assume this is because, beneath the GUI, it's effectively doing an "ipconfig /release" then "ipconfig /renew". Why does this happen in the first place, though? I've googled for this and seen quite a few other people (even on MSDN/Technet forums) experiencing the same or almost the same problem, but with no clear resolution. Suggestions of turning off IPv6 on the LAN adapter, and ensuring there's no power management "sleeping" the network adapter have been tried but do not cure the problem. There does not seem to be any particular sequence of events that cause it to happen either. I've had it go twice in 20 minutes when just randomly browsing the web with no other traffic, and I've also had it go once then not go again for 2-3 hours with the same sort of usage. Can anyone tell me why this is happening and how to make it stop? EDIT: Additional information based upon the answer provided so far: Firstly, I forgot the mention that this is Windows 7 64 bit if that makes any difference at all. I mentioned that I don't think the VirtualBox network adpater is causing this problem in any way, and I also have VirtualBox installed on two other machines, one running Vista Home Premium and the other running XP. Neither of these machine experience the same network connectivity issues as the Windows 7 machine. The IP assignment for the Windows 7 machine is the same both before and after the "drop". I have a DHCP server on the router issuing IP Addresses, however my Windows 7 machine uses a static address. Here's the output from "ipconfig": Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.1.2(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.1.1 DNS Servers . . . . . . . . . . . : 192.168.1.1 NetBIOS over Tcpip. . . . . . . . : Enabled Within the system's event logs, the only event that relates to the connection dropping is a "DNS Client Event" and this is generated after the connection has dropped and is an event detailing that DNS information can't be found for whatever website I may be trying to access, just as the connection drops: Log Name: System Source: Microsoft-Windows-DNS-Client Event ID: 1014 Task Category: None Level: Warning Keywords: User: NETWORK SERVICE Description: Name resolution for the name weather.service.msn.com timed out after none of the configured DNS servers responded. The network adapter chipset is Realtek PCIe GBE Family Controller and I have confirmed that this is the correct chipset for the motherboard (Asus M4A77TD PRO), and in fact, Windows Update installed an updated driver for this on 12/Jan/2009. The details of the update say that it's a Realtek software update from December 2009. Incidentally, I was still having the same intermittent problems prior to this update. It seems to have made no difference at all. EDIT 2 (1 Feb 2010): In my quest to solve this problem, I have discovered some more interesting information. On another forum, someone suggested that I should try running Windows in "Safe Mode With Networking" and see if the problem continues to occur. This was a fantastic suggestion and I don't know why I didn't think of it sooner myself. So, I proceeded to run in Safe Mode with Networking for a number of hours, and amazingly, the "drops" didn't occur once. It was a positive discovery, however, due to the intermittent nature of the original problem, I wasn't completely convinced that the problem was cured. One thing I did note is that the fan on my GFX card was running alot louder than normal. This is due to the fact that I have an ASUS ENGTS250 graphics card (http://www.asus.com/product.aspx?P_ID=B6imcoax3MRY42f3) which had a known problem with a noisy fan until a BIOS update fixed the issue. (See the "Manufacturer Response" here: http://www.newegg.com/Product/Product.aspx?Item=N82E16814121334 for details). Well, running in safe mode had the fan running (incorrectly) at full speed (as it did before the BIOS update), but with an (apparently) stable network connection. Obviously some driver was not loaded for the GFX card when in Safe Mode so this got me thinking about the GFX card (since the very noisy fan was quite obvious when running in Safe Mode). I rebooted into normal mode, and found that Nvidia had a very up-to-date new driver for my GFX card (only about 1 week old), so I downloaded the appropriate driver and installed it. After installation and a reboot, I was able to use my PC for an entire day with NO NETWORK DROPS!!! This was on Saturday. However, on the Sunday, I also had my PC for pretty much the entire day and experienced 2 network drops. No other changes have been made to my PC in this time. So, the story seems to be that updating my graphics card drivers seems to have improved (if not completely fixed) the issue, however, I'm still searching for a proper fix for this problem. Hopefully, this information may help anyone who may have additional ideas as to why this problem is occuring in the first place. (And why does new GFX card drivers have anything to do with the network?) I appreciate everyone's feedback so far. However, I'll have to ask once more if anyone has any further ideas of how to fix this particular problem? Thanks in advance.

  Read the article

• FreeBSD performance tuning. Sysctls, loader.conf, kernel.

  - by SaveTheRbtz

  I wanted to share knowledge of tuning FreeBSD via sysctls, so i'm posting them with comments. Based on Igor Sysoev (author of nginx) presentation about FreeBSD tuning up to 100,000-200,000 active connections. Sysctls are for 7.x FreeBSD. Since 7.2 amd64 some of them are tuned well by default. Prior 7.0 some of them are boot only (set via /boot/loader.conf) or does not exist at all. Highload web server sysctls: # Max. backlog size kern.ipc.somaxconn=4096 # Shared memory // 7.2+ can use shared memory > 2Gb kern.ipc.shmmax=2147483648 # Sockets kern.ipc.maxsockets=204800 # Do not use lager sockbufs on 8.0 # ( http://old.nabble.com/Significant-performance-regression-for-increased-maxsockbuf-on-8.0-RELEASE-tt26745981.html#a26745981 ) kern.ipc.maxsockbuf=262144 # Recive clusters (on amd64 7.2+ 65k is default) # For such high value vm.kmem_size must be increased to 3G #kern.ipc.nmbclusters=229376 # Jumbo pagesize(4k/8k) clusters # Used as general packet storage for jumbo frames # can be monitored via `netstat -m` #kern.ipc.nmbjumbop=192000 # Jumbo 9k/16k clusters # If you are using them #kern.ipc.nmbjumbo9=24000 #kern.ipc.nmbjumbo16=10240 # Every socket is a file, so increase them kern.maxfiles=204800 kern.maxfilesperproc=200000 kern.maxvnodes=200000 # Turn off receive autotuning #net.inet.tcp.recvbuf_auto=0 # Small receive space, only usable on http-server, on file server this # should be increased to 65535 or even more #net.inet.tcp.recvspace=8192 # Small send space is useful for http servers that serve small files # Autotuned since 7.x net.inet.tcp.sendspace=16384 # This should be enabled if you going to use big spaces (>64k) #net.inet.tcp.rfc1323=1 # Turn this off on highspeed, lossless connections (LAN 1Gbit+) #net.inet.tcp.delayed_ack=0 # This feature is useful if you are serving data over modems, Gigabit Ethernet, # or even high speed WAN links (or any other link with a high bandwidth delay product), # especially if you are also using window scaling or have configured a large send window. # You can try setting it to 0 on fileserver with 1GBit+ interfaces # Automatically disables on small RTT ( http://www.freebsd.org/cgi/cvsweb.cgi/src/sys/netinet/tcp_subr.c?#rev1.237 ) #net.inet.tcp.inflight.enable=0 # Disable randomizing of ports to avoid false RST # Before usage check SA here www.bsdcan.org/2006/papers/ImprovingTCPIP.pdf # (it's also says that port randomization auto-disables at some conn.rates, but I didn't tested it thou) #net.inet.ip.portrange.randomized=0 # Increase portrange # For outgoing connections only. Good for seed-boxes and ftp servers. net.inet.ip.portrange.first=1024 net.inet.ip.portrange.last=65535 # Security net.inet.ip.redirect=0 net.inet.ip.sourceroute=0 net.inet.ip.accept_sourceroute=0 net.inet.icmp.maskrepl=0 net.inet.icmp.log_redirect=0 net.inet.icmp.drop_redirect=1 net.inet.tcp.drop_synfin=1 # Security net.inet.udp.blackhole=1 net.inet.tcp.blackhole=2 # Increases default TTL, sometimes useful # Default is 64 net.inet.ip.ttl=128 # Lessen max segment life to conserve resources # ACK waiting time in miliseconds (default: 30000 from RFC) net.inet.tcp.msl=5000 # Max bumber of timewait sockets net.inet.tcp.maxtcptw=40960 # Don't use tw on local connections # As of 15 Apr 2009. Igor Sysoev says that nolocaltimewait has some buggy realization. # So disable it or now till get fixed #net.inet.tcp.nolocaltimewait=1 # FIN_WAIT_2 state fast recycle net.inet.tcp.fast_finwait2_recycle=1 # Time before tcp keepalive probe is sent # default is 2 hours (7200000) #net.inet.tcp.keepidle=60000 # Should be increased until net.inet.ip.intr_queue_drops is zero net.inet.ip.intr_queue_maxlen=4096 # Interrupt handling via multiple CPU, but with context switch. # You can play with it. Default is 1; #net.isr.direct=0 # This is for routers only #net.inet.ip.forwarding=1 #net.inet.ip.fastforwarding=1 # This speed ups dummynet when channel isn't saturated net.inet.ip.dummynet.io_fast=1 # Increase dummynet(4) hash #net.inet.ip.dummynet.hash_size=2048 #net.inet.ip.dummynet.max_chain_len # Should be increased when you have A LOT of files on server # (Increase until vfs.ufs.dirhash_mem becames lower) vfs.ufs.dirhash_maxmem=67108864 # Explicit Congestion Notification (see http://en.wikipedia.org/wiki/Explicit_Congestion_Notification) net.inet.tcp.ecn.enable=1 # Flowtable - flow caching mechanism # Useful for routers #net.inet.flowtable.enable=1 #net.inet.flowtable.nmbflows=65535 # Extreme polling tuning #kern.polling.burst_max=1000 #kern.polling.each_burst=1000 #kern.polling.reg_frac=100 #kern.polling.user_frac=1 #kern.polling.idle_poll=0 # IPFW dynamic rules and timeouts tuning # Increase dyn_buckets till net.inet.ip.fw.curr_dyn_buckets is lower net.inet.ip.fw.dyn_buckets=65536 net.inet.ip.fw.dyn_max=65536 net.inet.ip.fw.dyn_ack_lifetime=120 net.inet.ip.fw.dyn_syn_lifetime=10 net.inet.ip.fw.dyn_fin_lifetime=2 net.inet.ip.fw.dyn_short_lifetime=10 # Make packets pass firewall only once when using dummynet # i.e. packets going thru pipe are passing out from firewall with accept #net.inet.ip.fw.one_pass=1 # shm_use_phys Wires all shared pages, making them unswappable # Use this to lessen Virtual Memory Manager's work when using Shared Mem. # Useful for databases #kern.ipc.shm_use_phys=1 /boot/loader.conf: # Accept filters for data, http and DNS requests # Usefull when your software uses select() instead of kevent/kqueue or when you under DDoS # DNS accf available on 8.0+ accf_data_load="YES" accf_http_load="YES" accf_dns_load="YES" # Async IO system calls aio_load="YES" # Adds NCQ support in FreeBSD # WARNING! all ad[0-9]+ devices will be renamed to ada[0-9]+ # 8.0+ only #ahci_load= #siis_load= # Increase kernel memory size to 3G. # # Use ONLY if you have KVA_PAGES in kernel configuration, and you have more than 3G RAM # Otherwise panic will happen on next reboot! # # It's required for high buffer sizes: kern.ipc.nmbjumbop, kern.ipc.nmbclusters, etc # Useful on highload stateful firewalls, proxies or ZFS fileservers # (FreeBSD 7.2+ amd64 users: Check that current value is lower!) #vm.kmem_size="3G" # Older versions of FreeBSD can't tune maxfiles on the fly #kern.maxfiles="200000" # Useful for databases # Sets maximum data size to 1G # (FreeBSD 7.2+ amd64 users: Check that current value is lower!) #kern.maxdsiz="1G" # Maximum buffer size(vfs.maxbufspace) # You can check current one via vfs.bufspace # Should be lowered/upped depending on server's load-type # Usually decreased to preserve kmem # (default is 200M) #kern.maxbcache="512M" # Sendfile buffers # For i386 only #kern.ipc.nsfbufs=10240 # syncache Hash table tuning net.inet.tcp.syncache.hashsize=1024 net.inet.tcp.syncache.bucketlimit=100 # Incresed hostcache net.inet.tcp.hostcache.hashsize="16384" net.inet.tcp.hostcache.bucketlimit="100" # TCP control-block Hash table tuning net.inet.tcp.tcbhashsize=4096 # Enable superpages, for 7.2+ only # Also read http://lists.freebsd.org/pipermail/freebsd-hackers/2009-November/030094.html vm.pmap.pg_ps_enabled=1 # Usefull if you are using Intel-Gigabit NIC #hw.em.rxd=4096 #hw.em.txd=4096 #hw.em.rx_process_limit="-1" # Also if you have ALOT interrupts on NIC - play with following parameters # NOTE: You should set them for every NIC #dev.em.0.rx_int_delay: 250 #dev.em.0.tx_int_delay: 250 #dev.em.0.rx_abs_int_delay: 250 #dev.em.0.tx_abs_int_delay: 250 # There is also multithreaded version of em drivers can be found here: # http://people.yandex-team.ru/~wawa/ # # for additional em monitoring and statistics use # `sysctl dev.em.0.stats=1 ; dmesg` # #Same tunings for igb #hw.igb.rxd=4096 #hw.igb.txd=4096 #hw.igb.rx_process_limit=100 # Some useful netisr tunables. See sysctl net.isr #net.isr.defaultqlimit=4096 #net.isr.maxqlimit: 10240 # Bind netisr threads to CPUs #net.isr.bindthreads=1 # Nicer boot logo =) loader_logo="beastie" And finally here is my additions to GENERIC kernel # Just some of them, see also # cat /sys/{i386,amd64,}/conf/NOTES # This one useful only on i386 #options KVA_PAGES=512 # You can play with HZ in environments with high interrupt rate (default is 1000) # 100 is for my notebook to prolong it's battery life #options HZ=100 # Polling is goot on network loads with high packet rates and low-end NICs # NB! Do not enable it if you want more than one netisr thread #options DEVICE_POLLING # Eliminate datacopy on socket read-write # To take advantage with zero copy sockets you should have an MTU of 8K(amd64) # (4k for i386). This req. is only for receiving data. # Read more in man zero_copy_sockets #options ZERO_COPY_SOCKETS # Support TCP sign. Used for IPSec options TCP_SIGNATURE options IPSEC # This ones can be loaded as modules. They described in loader.conf section #options ACCEPT_FILTER_DATA #options ACCEPT_FILTER_HTTP # Adding ipfw, also can be loaded as modules options IPFIREWALL options IPFIREWALL_VERBOSE options IPFIREWALL_VERBOSE_LIMIT=10 options IPFIREWALL_DEFAULT_TO_ACCEPT options IPFIREWALL_FORWARD # Adding kernel NAT options IPFIREWALL_NAT options LIBALIAS # Traffic shaping options DUMMYNET # Divert, i.e. for userspace NAT options IPDIVERT # This is for OpenBSD's pf firewall device pf device pflog # pf's QoS - ALTQ options ALTQ options ALTQ_CBQ # Class Bases Queuing (CBQ) options ALTQ_RED # Random Early Detection (RED) options ALTQ_RIO # RED In/Out options ALTQ_HFSC # Hierarchical Packet Scheduler (HFSC) options ALTQ_PRIQ # Priority Queuing (PRIQ) options ALTQ_NOPCC # Required for SMP build # Pretty console # Manual can be found here http://forums.freebsd.org/showthread.php?t=6134 #options VESA #options SC_PIXEL_MODE # Disable reboot on Ctrl Alt Del #options SC_DISABLE_REBOOT # Change normal|kernel messages color options SC_NORM_ATTR=(FG_GREEN|BG_BLACK) options SC_KERNEL_CONS_ATTR=(FG_YELLOW|BG_BLACK) # More scroll space options SC_HISTORY_SIZE=8192 # Adding hardware crypto device device crypto device cryptodev # Useful network interfaces device vlan device tap #Virtual Ethernet driver device gre #IP over IP tunneling device if_bridge #Bridge interface device pfsync #synchronization interface for PF device carp #Common Address Redundancy Protocol device enc #IPsec interface device lagg #Link aggregation interface device stf #IPv4-IPv6 port # Also for my notebook, but may be used with Opteron #device amdtemp # Support for ECMP. More than one route for destination # Works even with default route so one can use it as LB for two ISP # For now code is unstable and panics (panic: rtfree 2) on route deletions. #options RADIX_MPATH # Multicast routing #options MROUTING #options PIM # DTrace options KDTRACE_HOOKS # all architectures - enable general DTrace hooks options DDB_CTF # all architectures - kernel ELF linker loads CTF data #options KDTRACE_FRAME # amd64-only # Adaptive spining in lockmgr (8.x+) # See http://www.mail-archive.com/[email protected]/msg10782.html options ADAPTIVE_LOCKMGRS # UTF-8 in console (9.x+) #options TEKEN_UTF8 #options TEKEN_XTERM # NCQ support # WARNING! all ad[0-9]+ devices will be renamed to ada[0-9]+ #options ATA_CAM # FreeBSD 9+ # Deadlock resolver thread # For additional information see http://www.mail-archive.com/[email protected]/msg18124.html #options DEADLKRES PS. Also most of FreeBSD's limits can be monitored by # vmstat -z and # limits PPS. variety of network counters can be monitored via # netstat -s In FreeBSD-9 netstat's -Q option appeared, try following command to display netisr stats # netstat -Q PPPS. also see # man 7 tuning PPPPS. I wanted to thank FreeBSD community, especially author of nginx - Igor Sysoev, nginx-ru@ and FreeBSD-performance@ mailing lists for providing useful information about FreeBSD tuning. So here is the question: What tunings are you using on yours FreeBSD servers? You can also post your /etc/sysctl.conf, /boot/loader.conf, kernel options, etc with description of its' meaning (do not copy-paste from sysctl -d). Don't forget to specify server type (web, smb, gateway, etc) Let's share experience!

  Read the article

• Cisco SR520w FE - WAN Port Stops Working

  - by Mike Hanley

  I have setup a Cisco SR520W and everything appears to be working. After about 1-2 days, it looks like the WAN port stops forwarding traffic to the Internet gateway IP of the device. If I unplug and then plug in the network cable connecting the WAN port of the SR520W to my Comcast Cable Modem, traffic startings flowing again. Also, if I restart the SR520W, the traffic will flow again. Any ideas? Here is the running config: Current configuration : 10559 bytes ! version 12.4 no service pad no service timestamps debug uptime service timestamps log datetime msec no service password-encryption ! hostname hostname.mydomain.com ! boot-start-marker boot-end-marker ! logging message-counter syslog no logging rate-limit enable secret 5 <removed> ! aaa new-model ! ! aaa authentication login default local aaa authorization exec default local ! ! aaa session-id common clock timezone PST -8 clock summer-time PDT recurring ! crypto pki trustpoint TP-self-signed-334750407 enrollment selfsigned subject-name cn=IOS-Self-Signed-Certificate-334750407 revocation-check none rsakeypair TP-self-signed-334750407 ! ! crypto pki certificate chain TP-self-signed-334750407 certificate self-signed 01 <removed> quit dot11 syslog ! dot11 ssid <removed> vlan 75 authentication open authentication key-management wpa guest-mode wpa-psk ascii 0 <removed> ! ip source-route ! ! ip dhcp excluded-address 172.16.0.1 172.16.0.10 ! ip dhcp pool inside import all network 172.16.0.0 255.240.0.0 default-router 172.16.0.1 dns-server 10.0.0.15 10.0.0.12 domain-name mydomain.com ! ! ip cef ip domain name mydomain.com ip name-server 68.87.76.178 ip name-server 66.240.48.9 ip port-map user-ezvpn-remote port udp 10000 ip ips notify SDEE ip ips name sdm_ips_rule ! ip ips signature-category category all retired true category ios_ips basic retired false ! ip inspect log drop-pkt no ipv6 cef ! multilink bundle-name authenticated parameter-map type inspect z1-z2-pmap audit-trail on password encryption aes ! ! username admin privilege 15 secret 5 <removed> ! crypto key pubkey-chain rsa named-key realm-cisco.pub key-string <removed> quit ! ! ! ! ! ! crypto ipsec client ezvpn EZVPN_REMOTE_CONNECTION_1 connect auto group EZVPN_GROUP_1 key <removed> mode client peer 64.1.208.90 virtual-interface 1 username admin password <removed> xauth userid mode local ! ! archive log config logging enable logging size 600 hidekeys ! ! ! class-map type inspect match-any SDM_AH match access-group name SDM_AH class-map type inspect match-any SDM-Voice-permit match protocol sip class-map type inspect match-any SDM_ESP match access-group name SDM_ESP class-map type inspect match-any SDM_EASY_VPN_REMOTE_TRAFFIC match protocol isakmp match protocol ipsec-msft match class-map SDM_AH match class-map SDM_ESP match protocol user-ezvpn-remote class-map type inspect match-all SDM_EASY_VPN_REMOTE_PT match class-map SDM_EASY_VPN_REMOTE_TRAFFIC match access-group 101 class-map type inspect match-any Easy_VPN_Remote_VT match access-group 102 class-map type inspect match-any sdm-cls-icmp-access match protocol icmp match protocol tcp match protocol udp class-map type inspect match-any sdm-cls-insp-traffic match protocol cuseeme match protocol dns match protocol ftp match protocol h323 match protocol https match protocol icmp match protocol imap match protocol pop3 match protocol netshow match protocol shell match protocol realmedia match protocol rtsp match protocol smtp extended match protocol sql-net match protocol streamworks match protocol tftp match protocol vdolive match protocol tcp match protocol udp class-map type inspect match-any L4-inspect-class match protocol icmp class-map type inspect match-all sdm-invalid-src match access-group 100 class-map type inspect match-all dhcp_out_self match access-group name dhcp-resp-permit class-map type inspect match-all dhcp_self_out match access-group name dhcp-req-permit class-map type inspect match-all sdm-protocol-http match protocol http ! ! policy-map type inspect sdm-permit-icmpreply class type inspect dhcp_self_out pass class type inspect sdm-cls-icmp-access inspect class class-default pass policy-map type inspect sdm-permit_VT class type inspect Easy_VPN_Remote_VT pass class class-default drop policy-map type inspect sdm-inspect class type inspect SDM-Voice-permit pass class type inspect sdm-cls-insp-traffic inspect class type inspect sdm-invalid-src drop log class type inspect sdm-protocol-http inspect z1-z2-pmap class class-default pass policy-map type inspect sdm-inspect-voip-in class type inspect SDM-Voice-permit pass class class-default drop policy-map type inspect sdm-permit class type inspect SDM_EASY_VPN_REMOTE_PT pass class type inspect dhcp_out_self pass class class-default drop ! zone security ezvpn-zone zone security out-zone zone security in-zone zone-pair security sdm-zp-in-ezvpn1 source in-zone destination ezvpn-zone service-policy type inspect sdm-permit_VT zone-pair security sdm-zp-out-ezpn1 source out-zone destination ezvpn-zone service-policy type inspect sdm-permit_VT zone-pair security sdm-zp-ezvpn-out1 source ezvpn-zone destination out-zone service-policy type inspect sdm-permit_VT zone-pair security sdm-zp-self-out source self destination out-zone service-policy type inspect sdm-permit-icmpreply zone-pair security sdm-zp-out-in source out-zone destination in-zone service-policy type inspect sdm-inspect-voip-in zone-pair security sdm-zp-ezvpn-in1 source ezvpn-zone destination in-zone service-policy type inspect sdm-permit_VT zone-pair security sdm-zp-out-self source out-zone destination self service-policy type inspect sdm-permit zone-pair security sdm-zp-in-out source in-zone destination out-zone service-policy type inspect sdm-inspect ! bridge irb ! ! interface FastEthernet0 switchport access vlan 75 ! interface FastEthernet1 switchport access vlan 75 ! interface FastEthernet2 switchport access vlan 75 ! interface FastEthernet3 switchport access vlan 75 ! interface FastEthernet4 description $FW_OUTSIDE$ ip address 75.149.48.76 255.255.255.240 ip nat outside ip ips sdm_ips_rule out ip virtual-reassembly zone-member security out-zone duplex auto speed auto crypto ipsec client ezvpn EZVPN_REMOTE_CONNECTION_1 ! interface Virtual-Template1 type tunnel no ip address ip virtual-reassembly zone-member security ezvpn-zone tunnel mode ipsec ipv4 ! interface Dot11Radio0 no ip address ! encryption vlan 75 mode ciphers aes-ccm ! ssid <removed> ! speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0 station-role root ! interface Dot11Radio0.75 encapsulation dot1Q 75 native ip virtual-reassembly bridge-group 75 bridge-group 75 subscriber-loop-control bridge-group 75 spanning-disabled bridge-group 75 block-unknown-source no bridge-group 75 source-learning no bridge-group 75 unicast-flooding ! interface Vlan1 no ip address ip virtual-reassembly bridge-group 1 ! interface Vlan75 no ip address ip virtual-reassembly bridge-group 75 bridge-group 75 spanning-disabled ! interface BVI1 no ip address ip nat inside ip virtual-reassembly ! interface BVI75 description $FW_INSIDE$ ip address 172.16.0.1 255.240.0.0 ip nat inside ip ips sdm_ips_rule in ip virtual-reassembly zone-member security in-zone crypto ipsec client ezvpn EZVPN_REMOTE_CONNECTION_1 inside ! ip forward-protocol nd ip route 0.0.0.0 0.0.0.0 75.149.48.78 2 ! ip http server ip http authentication local ip http secure-server ip http timeout-policy idle 60 life 86400 requests 10000 ip nat inside source list 1 interface FastEthernet4 overload ! ip access-list extended SDM_AH remark SDM_ACL Category=1 permit ahp any any ip access-list extended SDM_ESP remark SDM_ACL Category=1 permit esp any any ip access-list extended dhcp-req-permit remark SDM_ACL Category=1 permit udp any eq bootpc any eq bootps ip access-list extended dhcp-resp-permit remark SDM_ACL Category=1 permit udp any eq bootps any eq bootpc ! access-list 1 remark SDM_ACL Category=2 access-list 1 permit 172.16.0.0 0.15.255.255 access-list 100 remark SDM_ACL Category=128 access-list 100 permit ip host 255.255.255.255 any access-list 100 permit ip 127.0.0.0 0.255.255.255 any access-list 100 permit ip 75.149.48.64 0.0.0.15 any access-list 101 remark SDM_ACL Category=128 access-list 101 permit ip host 64.1.208.90 any access-list 102 remark SDM_ACL Category=1 access-list 102 permit ip any any ! ! ! ! snmp-server community <removed> RO ! control-plane ! bridge 1 protocol ieee bridge 1 route ip bridge 75 route ip banner login ^CSR520 Base Config - MFG 1.0 ^C ! line con 0 no modem enable line aux 0 line vty 0 4 transport input telnet ssh ! scheduler max-task-time 5000 end I also ran some diagnostics when the WAN port stopped working: 1. show interface fa4 FastEthernet4 is up, line protocol is up Hardware is PQUICC_FEC, address is 0026.99c5.b434 (bia 0026.99c5.b434) Description: $FW_OUTSIDE$ Internet address is 75.149.48.76/28 MTU 1500 bytes, BW 100000 Kbit/sec, DLY 100 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Full-duplex, 100Mb/s, 100BaseTX/FX ARP type: ARPA, ARP Timeout 04:00:00 Last input 01:08:15, output 00:00:00, output hang never Last clearing of "show interface" counters never Input queue: 0/75/23/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 1000 bits/sec, 0 packets/sec 336446 packets input, 455403158 bytes Received 23 broadcasts, 0 runts, 0 giants, 37 throttles 41 input errors, 0 CRC, 0 frame, 0 overrun, 41 ignored 0 watchdog 0 input packets with dribble condition detected 172529 packets output, 23580132 bytes, 0 underruns 0 output errors, 0 collisions, 2 interface resets 0 unknown protocol drops 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier 0 output buffer failures, 0 output buffers swapped out 2. show ip route Gateway of last resort is 75.149.48.78 to network 0.0.0.0 C 192.168.75.0/24 is directly connected, BVI75 64.0.0.0/32 is subnetted, 1 subnets S 64.1.208.90 [1/0] via 75.149.48.78 S 192.168.10.0/24 is directly connected, BVI75 75.0.0.0/28 is subnetted, 1 subnets C 75.149.48.64 is directly connected, FastEthernet4 S* 0.0.0.0/0 [2/0] via 75.149.48.78 3. show ip arp Protocol Address Age (min) Hardware Addr Type Interface Internet 75.149.48.65 69 001e.2a39.7b08 ARPA FastEthernet4 Internet 75.149.48.76 - 0026.99c5.b434 ARPA FastEthernet4 Internet 75.149.48.78 93 0022.2d6c.ae36 ARPA FastEthernet4 Internet 192.168.75.1 - 0027.0d58.f5f0 ARPA BVI75 Internet 192.168.75.12 50 7c6d.62c7.8c0a ARPA BVI75 Internet 192.168.75.13 0 001b.6301.1227 ARPA BVI75 4. sh ip cef Prefix Next Hop Interface 0.0.0.0/0 75.149.48.78 FastEthernet4 0.0.0.0/8 drop 0.0.0.0/32 receive 64.1.208.90/32 75.149.48.78 FastEthernet4 75.149.48.64/28 attached FastEthernet4 75.149.48.64/32 receive FastEthernet4 75.149.48.65/32 attached FastEthernet4 75.149.48.76/32 receive FastEthernet4 75.149.48.78/32 attached FastEthernet4 75.149.48.79/32 receive FastEthernet4 127.0.0.0/8 drop 192.168.10.0/24 attached BVI75 192.168.75.0/24 attached BVI75 192.168.75.0/32 receive BVI75 192.168.75.1/32 receive BVI75 192.168.75.12/32 attached BVI75 192.168.75.13/32 attached BVI75 192.168.75.255/32 receive BVI75 224.0.0.0/4 drop 224.0.0.0/24 receive 240.0.0.0/4 drop 255.255.255.255/32 receive Thanks in advance, -Mike

  Read the article

< Previous Page | 28 29 30 31 32 33  | Next Page >