Search Results

Search found 1543 results on 62 pages for 'motherboard'.

Page 32/62 | < Previous Page | 28 29 30 31 32 33 34 35 36 37 38 39  | Next Page >

• 5.1 surround sound for 12.04

  - by iwhorl

  I am very new to Ubuntu and linux as I have used windows only until yesterday. I am attempting to send my audio signal to my pioneer reciever using a single digital optical cable which is plugged into my M2N Sli Deluxe motherboard. I am sending video with a Geforce 8600gt video card through HDMI. That card does not support audio through HDMI. The only thing I have got to work so far is my left channel speaker acts as a stereo left and my sub woofer is trying to act as a stereo right. I was able to achieve this through altering the alsamixer settings. Can anyone point me in the right direction on this?

  Read the article

• Ubuntu doesn't find hdds with higher clock rates

  - by user136243

  I dual boot windows 7 64-bit and ubuntu 13.10 64-bit on separate disks, and utilize some overclocking from the BIOS. Windows works fine, however ubuntu can't seem to find any hard drives, except for at stock cpu speeds. While attempting to boot it says Gave up waiting for root device... and ALERT! /dev/sdb7 does not exist. Dropping to shell! A bootable usb stick still works, but gparted doesn't detect any other drives. Have tried: Boot-repair Changing SATA mode in BIOS Newer kernels Older ubuntu versions Not sure it's relevant, but the motherboard is a Gigabyte GA-A75M-UD2H with the newest BIOS version, the CPU an AMD Llano. This is hardly a fatal error, but it's inconvenient to change BIOS settings whenever I want to switch OS, and furthermore I'm quite curious about why it won't work. I'd appreciate any insight into what the actual problem is. So how can I resolve this issue ?

  Read the article

• Simpler Times

  - by Simon Moon

  Does anyone else out there long for the simpler days where you needed to move a jumper in the jumper block to set your modem card to use IRQ7 so it would not conflict with the interrupts used by other boards in your PC and your modem card came with a 78 page manual telling you everything you would need to know to write your own driver for the board including a full schematic along with the board layout showing every chip, capacitor, and resistor?  Ahhhhh, the simplicity!I am wrestling with UserPnp issues for a USB software licensing dongle that is needed by some third party software in one of our production applications. Of course, every machine in production is virtual, so it could be anything in the chain of the software application library to the device driver running on the VM to the configuration of the simulated USB port to the implementation of the USB connection and transport in the virtual host to the physical electrical connections in the USB port on the hypervisor.If only there were the virtual analog to a set of needle-nose pliers to move a virtual jumper.Come to think of it, I always used to drop those damn things such that they would land in an irretrievable position under the motherboard anyway.

  Read the article

• How to suppress "Card not present / present" spam in syslog?

  - by vava

  I'm getting a lot of Dec 27 08:35:49 htpc kernel: [ 1552.153797] pciehp 0000:00:1c.5:pcie04: Card not present on Slot(0-2) Dec 27 08:35:49 htpc kernel: [ 1552.157744] pciehp 0000:00:1c.5:pcie04: Card present on Slot(0-2) messages in my syslog, about 10 every second. That just makes syslog unusable, can I somehow get rid of them? I don't know and don't really care about the reason of those messages being there, partly because my motherboard doesn't have pcie slots on it and partly because everything I care about works perfectly. That might be a WiFi chip I disabled in bios but hey, I don't want wifi to be powered on, I'm not using it. So can I just suppress those messages?

  Read the article

• What to do when Ubuntu 13.10 64-bit does not boot?

  - by Anonymous John

  Ubuntu 13.10 will not boot, it won't even show the grub menu or Ubuntu booting. There is just a purple screen for 20 seconds then a black screen, then the screen says entering power save mode. here are my system specs:Intel DQ965GF Motherboard (OS independant), Intel core 2 64-bit, 12GB HHD (SATA), 200GB HHD (SATA, installed here), 250GB HHD (SATA, Encrypted with LUKS), 3GB DDR2 RAM (DIMM 0 A 1024MB,DIMM 1 A 524MB, DIMM 0 B 1024MB, DIMM 1 B 524MB),2 Rewritable DVD drives (one SATA and one IDE), small floppy drive and car reader, and AMD gallium 0.4. That's all I know from the top of my head, I have no OS to give me more info on the graphics card, but all Ubuntu OSs worked on my PC from 12.04-13.04 just fine. Does this mean will never be able to use Ubuntu 13.10? I think I am screwed.

  Read the article

• Computer Freezes After GRUB

  - by paulmcg421

  Ok so I've just built my first computer and have got it running, here are the specs: Asus P8Z68-V PCI-E LX Motherboard, Intel Core i5-2500K, Patriot Memory 8GB (2 x 4GB), Viper Xtreme Series PC3-15000 1866MHz CL9 Division 2 Edition Memory (PXD38G1866ELK), Gigabyte ATI Radeon 6850 820MHz 1GB PCI-E HDMI OC Windforce 2x 500w Ezcool 24pin psu as standard. The only thing I haven't bought new is the hard drive, it's a 250gb that I removed from an Acer Aspire M5100 that I was using till now with no OS Problems. On start up it runs fine but is unresponsive after the GRUB menu disappears to load Ubuntu (Oneric Ocelot). The keyboard lights then turn off and the screen eventually returns that there is no signal. Is there anything that I could be missing from building? (This is my first attempt at building my own PC) Any input would be appreciated, thanks !

  Read the article

• Ubuntu Gnome 14.04 - 100% CPU usage alternating between cores

  - by AwDeOh

  I've noticed my Ubuntu Gnome 14.04 has been getting a bit sluggish lately - things like Gnome Shell overview animation are jerky where they were lightning fast, Elder Scrolls Online is stuttering and dropping to low FPS where I previously had a solid 50-60 fps. Out of interest I looked at the CPU History, and when running nothing but the system monitor, I was getting this: That was 15 minutes ago. The 100% load seemed to be alternating between the cores. PC specs: i3 2130 processor. 8gb DDR3 RAM. ASUS P8-Z77M motherboard. Samsung 128gb SSD I've been trying to reproduce the problem, and while I'm not getting the 100% any more at idle, the system monitor is showing an average load of about 20-30%, that's with just Chrome and the System Monitor open. Oddly, if I touch nothing, it'll average out to about 20% - if I start moving the mouse around and do some typing, it's closer to 40%. Is this normal? Any help appreciated, I wouldn't even know where to start here..

  Read the article

• Cant install ubuntu 12.10?

  - by harsh

  I believe i have tried every trick in the book but Ubuntu just wont install. Windows has no issue with it. I burned a DVD of Ubuntu 12.10 and it has passed all checks, but i keep getting different errors while installing. Mainly while "Creating the Partition in dev" and some times during "Copying files". The errors are: Errno 30, Errno 33, Installer crashed, failed to create partition etc... I have Intel core 2 duo 2.66Ghz, 4gb ram and ASrock motherboard. I really want to install Ubuntu 12.10 and 12.10 only! Also Should i prefer 32bit or 64bit? I have burned a 32bit version. Thank you

  Read the article

• Kubuntu - Roccat keyboard does not work under GRUB and works partially in BIOS

  - by Donald_W

  The system specification GRUB boot loader OS: Windows 7 / Kubuntu 12.04 LTS Keyboard: Roccat Isku Motherboard: MSI Z77 MPower with the latest BIOS SSD/HDD: Kingston HyperX 3K (AHCI in BIOS enabled), 2 other HDDs I will provide more specific configuration if needed. The problem As stated in the topic I cannot navigate in the GRUB menu using mentioned keyboard (there is no problem when I use Logitech K360). I have tried both USB 2.0 and USB 3.0 ports. I cannot enter BIOS menu as well, however if I enter it using other keyboard, Roccat seems to work and I can navigate in the BIOS menu without any issues. Any ideas how can I fix that problem?

  Read the article

• Installing linux on OCZ RevoDrive3 x2

  - by user2101712

  First of all, here is the configuration of my computer: Motherboard: Asus H87Plus RAM: Corsair Vengeance 32GB Processor: Intel i7 4770 Drive: OCZ RevoDrive 3 x2 (240 GB) (OCZ Revodrive3 is a PCIe module) I am trying to install the latest version of Ubuntu Desktop (13.10). The problem is that in the UEFI (bios) the drive shows up as a 240 GB drive, but in the Ubuntu installer it shows up as two 120 GB drives. If I install Ubuntu in any of these two drives, it never boots. The screen flickers a few times and comes back to the UEFI menu. I have tried reading up and have come across information that the drive has a "fakeraid", and the solution is to use dmraid. However, when I give the following commands in the terminal (from live CD): # modprobe dm_mod # dmraid -ay it says: no raid disks. And the following command: # ls -la /dev/mapper/ just shows /dev/mapper/control How can I install Ubuntu on my computer? what is the correct method?

  Read the article

• Power Management - Sleep / Wake up Server when accessed

  - by KP65

  I have a headless HP Proliant Microserver with ubuntu installed. This machine has samba shares on it serving media and I usually rdp or ssh into it. Now my issue is I want the machine to go into sleep mode(so the state is saved from ram to the harddrive) and it will seem like it is turned off after an hour of idling. If there is any attempt to access the samba share through LAN I would like it to wake up. Now my motherboard supports this function, can anyone point me in the right direction for achieving this easily? Thanks

  Read the article

• On-board HDMI Audio

  - by TrackStar

  I have tried searching for answers to this issue but have had no luck. My HDMI display is working but I have no audio from the HDMI .There is no option for HDMI under sound preferences hardware or output. Purging and re-installing pulse audio doesn't change anything. I am using the on-board HDMI port on my motherboard, I do not have a PCI graphics card installed. CPU: i7-3770 Mobo: Asus Sabertooth z77 Kernel: 2.6.39-3-bb03 running aplay -l returns ** List of PLAYBACK Hardware Devices ** card 0: Intel [HDA Intel], device 0: ALC892 Analog [ALC892 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 1: ALC892 Digital [ALC892 Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 Seems as if the system doesn't even recognize the possibilty of HDMI audio output. Any ideas?

  Read the article

• Problemas com instalação do Ubuntu 12.04 LTS e 13.04

  - by user160096

  Não consegui, apesar de diversas tentativas, instalar nenhuma das versões: 12.04 LTS e 13.04. Cheguei a trocar de mouse,uma vez que o anterior não era reconhecido pelo sistema. Configuração: Motherboard Gigabyte GA-970A-D3 8 Gb de memória DDR-3 1 Hd Sata II Samsung de 80Gb, com Windows 7 Ultimate SP-1 1 Hd Sata II de 1Tb Samsung, como dispositivo de dados 1 Monitor 23" Phiips CL 234 1 Placa de Vídeo Gigayte NVidia GeForce GT-220 1 Placa Ethernet Realtek RTL 8139/810x 1 Mouse Microsoft (com software IntelliPoint 8.2) 1 Mouse Logitech M-100 (que usei para subsitutir o da Microsoft, SEM SUCESSO!!!) Na última tentativa, o instalador do ubuntu (tanto no 12.04 quanto no 13.04, PASMEM, não reconheceu o Win7 instalado...foi aí que 'JOGUEI A TOALHA"...! Apesar de minha simpatia pela liberdade e SO's livres e bons, dificuldades como esta desencorajam a transição/migração do usuário... É de se pensar sobre isto...!

  Read the article

• play sound from different applications on different output devices (speakers, headphones)

  - by Mike

  I want music (played e.g. via Audacious) to be played on speaker system, and all other sounds produced by other applications (including ubuntu sound effects) to be played on headphones. My computer has sound connectors at its back, and also connectors on its front panel. When I connect both headphones and speakers, only headphones work (I take it, the front connectors take precedence?). Should I purchase another sound card (in addition to the motherboard-integrated sound I have)? When I go to Audacious output settings, I see only the ouput plugin selection list, with PulseAudio selected and options like ALSA, OSS4 etc. But there's no facility to select particular output device (and I guess it wouldn't magically appear even if I had the second soundcard). Is this at all possible to bind specific application to particular output device?

  Read the article

• Is there a way to suppress one specific message from syslog?

  - by vava

  I'm getting a lot of Dec 27 08:35:49 htpc kernel: [ 1552.153797] pciehp 0000:00:1c.5:pcie04: Card not present on Slot(0-2) Dec 27 08:35:49 htpc kernel: [ 1552.157744] pciehp 0000:00:1c.5:pcie04: Card present on Slot(0-2) messages in my syslog, about 10 every second. That just makes syslog unusable, can I somehow get rid of them? I don't know and don't really care about the reason of those messages being there, partly because my motherboard doesn't have pcie slots on it and partly because everything I care about works perfectly. That might be a WiFi chip I disabled in bios but hey, I don't want wifi to be powered on, I'm not using it. So can I just suppress those messages?

  Read the article

• Stuck on Ubuntu Startup Screen

  - by Pietro

  Since yesterday, my system won't get past the startup screen (the Ubuntu logo with the blinking red dots). I left it for over an hour and didn't get the login screen. It was working normally before that and I don't recall any changes (no new software, etc). I can login through the terminal with ALT+F1 but I don't know what to do to get the graphic mode. The command startx fails. I'm running Ubuntu 12.10 64 bits on a Core I5 with Intel motherboard. No video card or sound card.

  Read the article

• No sound card detected [elementary os]

  - by Silouane Gerin

  h61 I set up a computer for my parents with elementary os. I installed an Asus P8H61-I motherboard which contains an integrated Realtek ALC887 sound card. The system doesn't recognize the sound card. Here are the results of some commands: lspci | grep audio doesn't return anything, alsa force-reload return Unloading ALSA sound driver modules: (none loaded). Loading ALSA sound driver modules: (none to reload). aplay -l no soundcard detected and cat /proc/asound/cards let me know that asound doesn't exist. I tried installing Realtek drivers but nothing happened. Here is a log from alsa : Log Can someone help me? Thanks.

  Read the article

• vlc 1.1.9 not working properly

  - by jaggib

  I have installed vlc 1.1.9 on wubi installed Ubuntu 11.04 using Ubuntu Software Center. Now when i tried playing videos in vlc (any format) full screen mode doesnt show controls and usually doesnt gets me out to window mode. it sometimes crashes to login screen. I tried the video output to 'X11 output mode' and 'XVideo output (XCB)' but the above problem persists and also bring another problem. full screen mode doesnt responds always when it does, it shows the video over the desktop instead of inside the player. the only way to get ubuntu to function normally is to restart the system. I tried with not using the 'Embed video in interface' but still the same problem. vlc runs perfectly well in windows. How can i make vlc function properly on my system or i need to install another player? My system config is: Graphics: VIA/S3G UniChrome Pro IGP Processor: AMD Sempron(tm) Processor 2800+ RAM: 1.5GB Motherboard Name: MS-7181 (MSI)

  Read the article

• What can I change/investigate where the install does not complete?

  - by tunist

  I have already successfully installed Ubuntu 10.10 on my laptop and it works fine. I attempted to get my desktop PC to dual boot Windows and Ubuntu but found that neither the 32 or 64 bit install images will boot/install successfully. The startup script locks on 'initializing core #2' (or 1 or 3).. once I saw it say 'ok' at the end but it still locks there. I have tried to change the boot sequence by inserting 'debug' and 'acpi-off' into txt.cfg in both isolinux and syslinux folders but no changes were obvious during the boot.. as far as it got. The pc is built with an abit IP35 motherboard and nvidia 8600GT gfx card. Does anyone have any suggestion of what else I can change to get the install working?

  Read the article

• After low level formatting can microsoft track previously pirated windows installed on pc

  - by Neelabh

  am getting call from Microsoft and they are forcing me to purchase so many licensed software but my budget is not that much.. So they are asking for On-Site Audit (SAM Review)... So I did low level formatting of my All PC's and Installed Ubuntu. So can they track I installed pirated windows xp earlier on these system or I need to change hardware.. After formatting on what parameter Microsoft Track earlier piracy: 1) By any Harddisk ID 2) By any Motherboard ID 3) By any IP Address Please help me otherwise I have to borrow so much money for licensing fee. Thanks in Advance..

  Read the article

• Does Ubuntu 12.04 supports for B75 boards?

  - by rail02000

  I want to build a new computer with Intel G840 CPU and Gigabyte B75M-D3H motherboard and install Ubuntu (or Kubuntu) 12.04 64bit on it. However, I'm worried about whether the chip is too new and whether that Linux Kernel now has support for it. According to the article [Phoronix] Intel Core i7 3770K Ivy Bridge Linux Performance Review ,the Linux kernel is ready to work on the chip. Existing Intel Sandy Bridge motherboards/chipsets are compatible with Ivy Bridge processors, but earlier this month Intel launched the new Panther Point chipsets that are already compatible with Linux too: the B75, H77, Z75, Z77, HM75, HM76, UM77, and HM77. But I didn't find further information or cases about running Ubuntu on the chip. So,is it OK to run Ubuntu on the board? Do I need to upgrade the kernel to a newer version (3.4 or 3.5 etc.) to get the system more smoothly? Or should I choose boards with H61 chip? Thank for your response!

  Read the article

• ubuntu 12.10 slow application load upon restart

  - by Adam

  new ubuntu user. after boot (boot is quite fast), opening applications such as firefox, libra, system settings, takes close to 10 seconds to open. after the application is loaded in RAM, the application opens fine. the system feels snappy, quick. when i have two FIREFOX open, unity is snappy in showing me the two windows side by side. but upon bootup, loading the application takes 10 seconds. there is not much hdd activity. fresh install. its the same for system settings and browsing system settings. when system settings is opened for the first time (10 second), and i click for example Color, it will take quite long to open the color settings. hardware: i3 4gb ram radeon 5770 250gb sata gigabyte h55m motherboard i am using ubuntu straight out of the box, no propriety drivers. 64 bit. i have reinstalled OS, and still the same.

  Read the article

• Ubuntu hanging problem

  - by JMearsXS

  I have a problem with ubuntu 12.04 LTS on my custom tower pc in which the OS hangs at specific points:- - live usb with persistence: hangs when mouse appears. - installed to hard disk: hangs after login, logon sound never plays. i am a relative newbie with linux so any terminal output would not make sense to me :) the pc specs are as follows: - MSI MS-7301 Cuba motherboard - 3GB DDR2 RAM (NOT dual channel) - ATI Radeon HD 5450 gfx card the live usb works fine on all other PC's i tried it on. could any one help me ?

  Read the article

• Attempting to install Ubuntu 11.10 along side Windows 7 Professional 64bit. Installer doesn't recognize an operating system present

  - by KichigaiDave

  System Details: Asus Sabertooth 990FX motherboard AMD FX-8120 CPU 16 GB DDR3 1600 Corsair Vengance RAM (4x4) EVGA Nvidia GTX-560Ti video card 2x Dvd/cd rw dirves 1 Bluray RW drive 1 Orico USB 3.0 & eSata panel 1 Sabrent floppy bay card reader w/USB 2.0 port 760W pc power & cooling PS OCZ agility 120GB SSD (Windows 7 Professional 64bit installed in an approx 80gb partition, NTFS. There is also a "System Reserved" partition shown in disk management at 100mb in size, also NTFS) That leaves about 32GB usable free, un-partitioned space in which I hoped to install Ubuntu. However when I run the Ubuntu 11.10 AMD64 installer, it doesn't show there is even an operating system installed. It just shows the entire drive as free-unpartitioned space. Just not sure what to do here. I was thinking about using the Wubi installer, but i don't know about that. Is the performance reduction pretty drastic? Thanks,

  Read the article

• Installed Ubuntu 14.04. How do I get it working with my new AMD R9 280X. When I run it I get garbage on the display

  - by user289455

  I installed Ubuntu 14.04 on my Gigabyte A88X FM2+ motherboard and A10 7700K processor. Everything worked perfectly. This system is dual booted with Windows 8.1 for gaming and I installed subsequently I installed an AMD r9 280X gpu. Windows was easy. It kept working with the new card installed and I just needed to download and instal the driver. Reboot and it's done. Ubuntu boots into a blank display. I enter the password and can log in. The menu on the left and bar at the top are visible but when I try to open an app, I get blocks and rubbish on the display. My preference is not to remove the card. So, my question is: What would be the procedure I could follow where I can log in using a text based terminal and download and install the AMD drivers.

  Read the article

< Previous Page | 28 29 30 31 32 33 34 35 36 37 38 39  | Next Page >