Search Results

Search found 1543 results on 62 pages for 'motherboard'.

Page 33/62 | < Previous Page | 29 30 31 32 33 34 35 36 37 38 39 40  | Next Page >

  • Dual 7950, freezes during startup

    - by Hiro
    I have two identical video cards right now. Xubuntu will boot up no problem if I only have one card installed. If I install the 2nd card it will just hang midway thru the loading screen. Regardless of which card I use and which position on the motherboard, it will freeze if I have both installed. I've tried installing the proprietary drivers, both fglrx and fglrx-updates, still freezes in the same spot. Uninstalled those and went back to the default ones. The only way I can get a terminal is by booting into failsafe mode. Booting using 13.10 i386 on a USB stick gives me some errors related to what I think is the 2nd video card: [drm:r600_ring_test] ERROR radeon: ring 1 test failed (scratch(0x850C)=0xCAFEDEAD) [drm:r600_dma_ring_test] ERROR radeon: ring 3 test failed (0x02FFFF6B) radeon 0000:0200.2 disabling GPU acceleration"

    Read the article

  • Setting Default Ubuntu eth port

    - by No1_Melman
    Background: I have a desktop computer running Ubuntu 12.04. I have installed DRBL to handle DHCP server and Clonezilla Server. I have a network card in my desktop with 2 ports in it. These 2 ports are bonded together and are used by DRBL. There is a 3rd port integrated in the motherboard. I want to use this 3rd port for internet. DRBL knows that this is set for internet. Ubuntu Network-Manager has stopped recognising the connections (device not managed). It use to say that eth1 was default (first port in the network card) I want eth0 to be default as that is the Internet port. Question: How do I make network-manager see eth0 as the defualt port?

    Read the article

  • Dual boot: Linux Grub loader does not show windows

    - by user292099
    my computer previously only had windows installed on it. Recently I decided to try Linux and opted for a dual boot so I installed Linux Mint 17 Cinnamon 64-bit on a separate hard drive within my computer. After installation my computer would directly boot to Linux upon start up and did not even show a grub screen. Using the boot-repair I was finally able to make the Grub loader show a boot list upon start up, but the Windows partition is not there. The boot-info summary is found on this link. http://paste2.org/9pIGZtDv Any help would be great Motherboard: Gigabyte z77 ud5h OS: Linux Mint 17 Cinnamon 64-bit & Windows 8.1 64-bit

    Read the article

  • Plugged in, not charging Windows 7 solution

    I recently had the popular problem of Windows 7 battery manager malfunctioning and not charging my battery when plugged in.  The battery was fine, the power supply was fine, and the motherboard was fine (I have enough laptops with the same specs in the Headspring office, and I was able to swap out parts to isolate the problem). I also searched for this problem online, and many folks are having this problem with all makes of laptop computers.  I found the steps that solved my problem here...Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • CPU spikes cause audio stuttering in Audacious when browsing? (Lubuntu)

    - by Alucai Vivorvel
    My default audio player is Audacious, browser Google Chrome. I tried Firefox, and while I love it, the CPU load spikes when doing something as simple and small and switching a tab, which causes the audio playing to stutter (as sound is onboard and handled thru the CPU). Chrome doesn't do this as much, but there is the occasional stuttering when browsing, which is ridiculous, as not even Windows Vista does this. So I thought maybe it's something to do with how Lubuntu handles sound, I checked and only ALSA was installed. I tried installing PulseAudio, but, while the music "plays", nothing comes through the speakers. Immediately after switching back to ALSA the music pours out of them. So I was wondering if you had any idea what was going on here. I asked on Ubuntu Forums but apparently my problem is too complex, as it's been over a week since the last reply. Specs are: AMD Athlon 64 3200+ @ 2GHz 2GB Corsair 667MHz DDR2 RAM ATi HD Radeon 3650 (AGP) 512MB 500W Cooler Master PSU 80GB SATA II HDD (Vista is installed on 500GB drive) Biostar K8M800 Motherboard

    Read the article

  • When I boot it says "No any drive found" and turns off after upgrade from 9.10 to 10.04

    - by user797582
    I did an upgrade on the weekend from Ubuntu 9.10 to 10.04 (karmic to lucid). Now, when I restart my computer, it goes through the regular load screen showing my P5K Asus motherboard, just like before but instead of showing the Ubuntu load screen, it tries to start grub but fails and then says "No any drive found" and the screen goes black. I've tried changing the drive configuration in the BIOS to AHCI or RAID and that didn't work. I've tried disabling JMICRON but to no avail. I'm running out of options here. Any advice?

    Read the article

  • Ubuntu Doesn't Start from USB After Installation

    - by Fred Venus
    My computer refuses to boot from the USB even after I change everything that I can possibly think of on my motherboard's BIOS. But I have booted from the USB twice in the past. The first time is when I first got the computer and needed to install a new operating system. The second time is when I installed Windows onto the whole hard drive and needed to reinstall Ubuntu. It seems that it only refuses to boot if there is already an existing installation of Ubuntu on the hard drive. Any ideas on what is going on?

    Read the article

  • install 64 bit as dual boot with 32 bit

    - by profgeorgefhart
    I downloaded Ubuntu 12.10 - bit .iso onto a bootable USB and want to put it on to my 32 bit 12.10 system as a dual boot, using a totally separate 1 Tb disk [which already has data on it]. However, when I go to restart and hit F8 fir BIOS set-up, I can change all the settings except the boot search order. Is there some other way to force the startup to read the USB first? Is the fact that I cannot change the search order to do with the fact that the 32 bit OS was 'Installed in legacy mode' not 'EFI? How can I rectify this? (This might be related -- might I need to update my BIOS for my Intel DX38BT motherboard? I think their last upgrade was 2009.)

    Read the article

  • sometimes, strange audio distortion(peeping, scratching), ubuntu 12.04

    - by richi902
    i have a problem with my sound in ubuntu 12.04. the problem is, that sometimes out of nowhere, when switching songs, or playing youtube videos, changing volume with my keyboard buttons, that the sound gets distorted(peeping, scratching). i dont know if it is related, but when i skip through music in rythmbox, there is also a little scratching noise. i can sometimes temporarly fix it: for youtube videos, i refresh the page, and sometimes it works agian normal, mostly not. for audio playback with rythmbox, i have to pause the song for sometime, and resume it, and hope that it works. before all that,i have changed my soundcard to "Analog Surround 5.1" in the sound settings from ubuntu, but i also used alsamixer to change it from 2 channels to 6 channels, since changing in ubuntu sound settings alone wasnt enough to make the other speaks work. i use a ASUS P8-H61-M LE B3 Revision Motherboard. which has a built in surround soundcard.

    Read the article

  • Problems while installing Ubuntu 12.04 64 & 32 bits from LiveCd

    - by user76104
    I am trying to install Ubuntu on my new pc but I am encountering problems. When I boot from the installation CD, everything runs fine until the "window" when the user has to decide to Try Ubuntu or Install it in the machine. Well that "window" appears in blank, and my mouse and keyboard behaves really slow. I can't do anything , so i have to shut it down by pressing power button. The specification of my pc are this Motherboard: Gigabyte ex58 ud7 CPU: i7 950 HD: Western digital caviar black Int. memory: 6gb memory corsair Graphics: evga gtx580 I really need to install Ubuntu or another Linux distribution, i am using de seismic Unix program {Edit : Guess it is this} on my laptop. I hope someone can help me.

    Read the article

  • Linux (Ubuntu 12.10) starts up, but the main menu on the left side, and the pictograms at the upper right corner, do not show up

    - by user114220
    Linux OS (Ubuntu 12.10) starts up (user login, my personal picture of a beautiful Norwegian fjord-landscape fills the background), but the main menu on the left side, and the pictograms (battery state etc.) at the upper right corner of the screen, do not show up. This occurred yesterday quite suddenly after six or seven weeks working with Ubuntu 12.10. Then I started in recovery mode and performed a file system check (fsck) but that takes hours and finally a message ¨Sorry Ubuntu has experienced an internal error etc¨ appeared. How can I determine what has gone wrong and eventually, how can I solve it? So that I can work again using Ubuntu 12.10 (on a dual-boot system, Intel i7, ASUS P8P67 motherboard).

    Read the article

  • What to do about USB support?

    - by RhZ
    USB speeds are consistently slow in ubuntu, and have been for years. I just bought two new machines with usb 3.0, running 10.04, and yet nothing has changed, top speeds are only about 8.0 MB per second and they quickly drop to 2 or less. Its very frustrating. Are there any fixes for this at all? I find almost nothing online. The board is a gigabyte 970A-DS3 motherboard. Is there any driver I should install? I am using brand new usb sticks (kingston) and making sure to plug into the 3.0 (blue) slot.

    Read the article

  • USB mouse freezes

    - by Zabba
    A simple Microsoft Optical mouse 1000 (USB) that runs perfectly on Windows, freezes up under Ubuntu 10.x and Fedora 1x after about 10 minutes of using the OS.Rebooting, the same problem comes up again in a few minutes. Interestingly, the problem does not occur when Ubuntu is installed in Oracle VirtualBox VM. Installing Ubuntu "as usual" (i.e. not in a VM), causes the problem to occur. Has any one here faced the same problem or have a solution for it? Maybe using a different mouse that is known to work with Ubuntu 10.x? If it helps my system is: Asus P5NSLI motherboard (nVidia nForce 570 chipset), 4 GB RAM Ubuntu 10.10 refers to "32 bit" version of Ubuntu It seems that Ubuntu has a lot of all types of freeze issues. Can someone recommend a version of Ubuntu that is fairly recent and stable ? I intend to use Ubuntu for Ruby on Rails development.

    Read the article

  • Unable to Install ubuntu onto a blank hard drive

    - by user287561
    I just built a pc and I am trying to install Ubuntu 14 onto it. I did the process in which you format the flash drive to be able to have Ubuntu 14 and install directly in BIOS. BIOS is set up to boot from the flash drive. Every time I try to do the install process, it will randomly reboot itself onto the motherboard BIOS menu. This loop constantly occurs and the only way I can use Ubuntu is to put the option of trying but not installing. HELP!

    Read the article

  • Reliable way of generating unique hardware ID

    - by mr.b
    Question: what's the best way to accomplish following. I have to come up with unique ID for each networked client, such that: it (ID) should persist once client software is installed on target computer, and should continue to persist if software is re-installed on same computer and same OS installment, it should not change if hardware configuration is modified in most ways (except changing the motherboard) When hard drive with client software installed is cloned to another computer with identical hardware configuration (or, as similar as possible), client software should be aware of that change. A little bit of explanation and some back-story: This question is basically age old question that also touches topic of software copy-protection, as some of mechanisms used in that area are mentioned here. I should be clear at this point that I'm not looking for a copy-protection scheme. Please, read on. :) I'm working on a client-server software that is supposed to work in local network. One of problems I have to solve is to identify each unique client in network (not so much of a problem), so that I can apply certain attributes to every specific client, retain and enforce those attributes during deployment lifetime of a specific client. While I was looking for a solution, I was aware of following: Windows activation system uses some kind of heavy fingerprinting mechanism, that is extremely sensitive to hardware modifications, Disk imaging software copies along all Volume IDs (tied to each partition when formatted), and custom, uniquely generated IDs during installation process, during first run, or in any other way, that is strictly software in its nature, and stored in registry or on hard drive, so it's very easy to confuse two Obvious choice for this kind of problem would be to find out BIOS identifiers (not 100% sure if this is unique through identical motherboard models, though), as that's the only thing I can rely on, that isn't duplicated, transferred by cloning, and that can't be changed (at least not by using some user-space program). Everything else fails as either being not reliable (MAC cloning, anyone?), or too demanding (in terms that it's too sensitive to configuration changes). Am I missing something obvious here? Sub-question that I'd like to ask is, am I doing it correctly, architecture-wise? Perhaps there is a better tool for task that I have to accomplish... Another approach I had in mind is something similar to handshake mechanism, where server maintains internal lookup table of connected client IDs (which can be even completely software-based and non-unique at any given moment), and tells client to come up with different ID during handshake, if duplicate ID is provided upon connection. That approach, unfortunately, doesn't play nicely with one of requirements to tie attributes to specific client during lifetime.

    Read the article

  • How to using Mono for windows to Access WMI to get hardware Id?

    - by guaike
    Hi, folks Recently,I need run my winforms App on mono for windows platform,But i am using WMI to get MAC address and CPU ID in my original code,switch to Mono for Windows,it does not working. I found that "System.Management.dll" APIs is not implemented in Mono. How can i do?How to get CPU ID,MAC Address, Hard Disk Serial Number,and Motherboard Serial Number with out WMI?

    Read the article

  • Delphi low-level machine parameter access

    - by tonyhooley.mp
    There are many very low-level parameters measured by PCs and their processors (e.g. core temperatures, fan-speeds, voltage levels at various parts of the motherboard and processor internals) which are available and displayed by the BIOS, and by some aaplication programs. How does one access these low-level (real-time) data via Delphi? Is there a library? Is there a Windows API?

    Read the article

  • How to generate unique serial number of machine in Delphi?

    - by noxwow
    Hi, I have question how to generate unique serial number of machine in Delphi? I tried to do this using the ID the motherboard or processor, but unfortunately it's unfortunately supported. Partition serial numbers, etc. fall off, because it is changing after the formatted. I'm looking for something that doesn't change after the formatted. Has anyone any idea?

    Read the article

  • Fix overscan in Linux with Intel graphics Vizio HDTV

    - by Padenton
    I am connecting my server to my HDTV so that I can conveniently display it there. My VIZIO HDTV cuts off all 4 edges. I already realize it is not optimal to be running a GUI on a server; this server will not have much external traffic so I prefer it for convenience. I have already spent countless hours searching for a fix, but all I could find required an ATI or NVIDIA graphics card, or didn’t work. In Windows, the Intel driver has a setting for underscan, though it seems only to be available by a glitch. Here’s my specs: Ubuntu Linux (Quantal 12.10) (Likely to switch to Arch) This is a home server computer, with KDE for managing(for now, at least) Graphics: Intel HD Graphics 4000 from Ivy Bridge Motherboard: ASRock Z77 Extreme4 CPU: Intel Core i5-3450 My monitors: Dell LCD monitor Vizio VX37L_HDTV10A 37" on HDMI input I have tried all of the following from both HDMI?HDMI and DVI?HDMI cables connected to the ports on my motherboard: Setting properties in xrandr Making sure drivers are all up to date Trying several different modes The TV was “cheap”; max resolution 1080i. I am able to get a 1920x1080 modeline, in both GNU/Linux and Windows, without difficulty. There is no setting in the menu to fix the overscan (I have tried all of them, I realize it’s not always called overscan). I have been in the service menu for the TV, which still does not contain an option to fix it. No aspect ratio settings, etc. The TV has a VGA connector but I am unsure if it would fix it, as I don’t have a VGA cable long enough, and am not sure it would get me the 1920x1080 resolution which I want. Using another resolution does not fix the problem. I tried custom modelines with the dimensions of my screen’s viewable area, but it wouldn’t let me use them. Ubuntu apparently doesn’t automatically generate an xorg.conf file for use. I read somewhere that modifying it may help solve it. I tried X -configure several times(with reboots, etc.) but it consistently gave the following error messages: In log file: … (WW) Falling back to old probe method for vesa Number of created screens does not match number of detected devices. Configuration failed. In output: … (++) Using config file: "/root/xorg.conf.new" (==) Using system config directory "/usr/share/X11/xorg.conf.d" Number of created screens does not match number of detected devices. Configuration failed. Server terminated with error (2). Closing log file. Tried using 'overscan' prop in xrandr: root@xxx:/home/xxx# xrandr --output HDMI1 --set overscan off X Error of failed request: BadName (named color or font does not exist) Major opcode of failed request: 140 (RANDR) Minor opcode of failed request: 11 (RRQueryOutputProperty) Serial number of failed request: 42 Current serial number in output stream: 42 'overscan on', 'underscan off', 'underscan on' were all also tried. Originally tried with Ubuntu 12.04, but failed and so updated to 12.10 when it was released. All software is up to date. I am not opposed to reinstalling my OS, likely will anyways (my preference being Arch).

    Read the article

  • Intel Rapid Storage / Smart Response SSD caching issue

    - by goober
    Background Recently built my own PC. It works! Almost. It's been a while since getting into the guts of these things, so I'm familiar but may be missing something simple. FYI, I don't care about blowing the OS away -- it's brand new and we can go back from scratch as many times as necessary. Goal / Issue I'd like to use the SSD to take advantage of Intel's Smart Response technology (allows the SSD to act as a cache for HDDs) I would like the SSD cache to act as a cache for my HDDs, which I would like to be in a RAID1 array (so I get the speed from the SSD and the redundancy from the RAID1) However, Windows only sees the drive in device manager (not as a drive), so I'm unsure what to do about that. Related: as far as I know, for this to work, the drives all have to be in a single RAID array (i.e. a RAID0 pairing of the SSD and the RAID1 HDD array). However, when attempting this at the BIOS level, I am told there is not enough space for an array. Steps so Far Moved the SSD onto the Intel controller (I'd had it on the Marvel 6.0 controller instead of the Intel controller, so the BIOS was only seeing it in a strange way) Updated the BIOS of the motherboard to the latest version Reinstalled Intel's RST (iRST?) software several times, as some forums reported it working after reinstalling 3 times (which does not inspire confidence). Checked Intel storage: it does see the SSD as a physical, non-RAID device. However, it says no space exists if I try to create an array. Checked the BIOS: it does not show up in the boot order, but is an option that can be selected under boot options. Tried the firmware update for that model. Issue: the firmware CD doesn't detect a drive; maybe the Intel storage controller is making it difficult? moved the ssd to the marvel controller. The firmware update cd appeared to hang while searching for drives. swapped out the SATA cable for the manufacturer's and moved back to the intel storage controller. Noticed at this point that in the Intel RST software, a device DOES show up in addition to the RAID set -- only shown as a "60 GB internal disk". Windows doesn't appear to see it as a drive, but it does still show in device manager. Move SSD to port from 0-3 on MOBO and set SATA mode to IDE (after disconnecting RAID1 config) to allow the firmware update to work. Firmware was already at the latest version. Next Steps ? Components involved ASUS P8Z68-V PRO motherboard (Intel Z68 Chipset) Intel i7 2600k Processor 2 x 1TB 7200 RPM HDDs 64 GB Crucial M4 SSD (M4-CT064M4SSD2) For Reference -- Storage Configuration Intel 3 gbps Intel 3gbps Intel 6gbps Marvel 6gbps +----------+ +----------+ +----------+ +----------+ | | <----+ | | +-+ | | | |----------| | |----------| |-|--------| |----------| | | | | + | | | | | | +----------+ | +--|-------+ +-|--------+ +----------+ | | | + v v | 1 TB HDD 64 GB SSD + +> 1 TB HDD For Reference -- Intel RST (v10.8.0.1003) Screenshot Don't mind the "rebuilding" -- knocked a power cable out at one point; it's doing its job, not an indicator of a bad HDD. Any thoughts? Thanks in advance for any help!

    Read the article

  • Slow disk transfer rate

    - by Nooklez
    I have problem with slow disk transfer rate. It's static files server for our website. I was making backup of data and noticed that tar is very slow. So I did hdparm -t and... hdparm -t /dev/sda3 /dev/sda3: Timing buffered disk reads: 6 MB in 4.70 seconds = 1.28 MB/sec It's low traffic hour now on our site, so huge I/O traffic is not a reason (iotop show less than 1 MB/s). It's RAID10 setup (2x2 SATA drives). Unit UnitType Status %RCmpl %V/I/M Stripe Size(GB) Cache AVrfy ------------------------------------------------------------------------------ u0 RAID-10 OK - - 64K 1396.96 W ON VPort Status Unit Size Type Phy Encl-Slot Model ------------------------------------------------------------------------------ p0 OK u0 698.63 GB SATA 0 - WDC WD7500AADS-00M2 p1 OK u0 698.63 GB SATA 1 - WDC WD7500AADS-00M2 p2 OK u0 698.63 GB SATA 2 - WDC WD7500AADS-00M2 p3 OK u0 698.63 GB SATA 3 - WDC WD7500AADS-00M2 We have recently changed almost all components of server (excluding 3ware controller + disks). And I think problems started since then. Can it be configuration problem or hardware? EDIT: I found something like that in dmesg [166843.625843] irq 16: nobody cared (try booting with the "irqpoll" option) [166843.625846] Pid: 0, comm: swapper Not tainted 3.1.5-gentoo #3 [166843.625847] Call Trace: [166843.625848] <IRQ> [<ffffffff810859d5>] __report_bad_irq+0x35/0xc1 [166843.625856] [<ffffffff81085cec>] note_interrupt+0x165/0x1e1 [166843.625859] [<ffffffff8108445f>] handle_irq_event_percpu+0x16f/0x187 [166843.625861] [<ffffffff810844a9>] handle_irq_event+0x32/0x51 [166843.625863] [<ffffffff8108640b>] handle_fasteoi_irq+0x75/0x99 [166843.625866] [<ffffffff810039d7>] handle_irq+0x83/0x8b [166843.625868] [<ffffffff810036ad>] do_IRQ+0x48/0xa0 [166843.625871] [<ffffffff8155082b>] common_interrupt+0x6b/0x6b [166843.625872] <EOI> [<ffffffff812981e8>] ? acpi_safe_halt+0x22/0x35 [166843.625877] [<ffffffff812981e2>] ? acpi_safe_halt+0x1c/0x35 [166843.625879] [<ffffffff81298216>] acpi_idle_do_entry+0x1b/0x2b [166843.625881] [<ffffffff81298276>] acpi_idle_enter_c1+0x50/0x99 [166843.625884] [<ffffffff813b792a>] cpuidle_idle_call+0xed/0x171 [166843.625886] [<ffffffff81001257>] cpu_idle+0x55/0x81 [166843.625888] [<ffffffff81532a69>] rest_init+0x6d/0x6f [166843.625891] [<ffffffff81aa1aca>] start_kernel+0x329/0x334 [166843.625893] [<ffffffff81aa12a6>] x86_64_start_reservations+0xb6/0xba [166843.625894] [<ffffffff81aa139c>] x86_64_start_kernel+0xf2/0xf9 [166843.625896] handlers: [166843.625898] [<ffffffff812dc8de>] twl_interrupt [166843.625900] Disabling IRQ #16 It's related to problem? EDIT #2: Based on feedback in comments, here is more informations. cat /proc/interrupts 16: 390813 0 0 0 IO-APIC-fasteoi 3w-sas Controller model: [ 1.095350] 3ware Storage Controller device driver for Linux v1.26.02.003. [ 1.095467] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014. [ 1.095641] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000. [ 1.095787] 3w-sas 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.095881] 3w-sas 0000:01:00.0: setting latency timer to 64 [ 1.910801] 3w-sas: scsi0: Found an LSI 3ware 9750-4i Controller at 0xfe560000, IRQ: 16. [ 2.216537] 3w-sas: scsi0: Firmware FH9X 5.08.00.008, BIOS BE9X 5.07.00.011, Phys: 8. [ 2.216836] scsi 0:0:0:0: Direct-Access LSI 9750-4i DISK 5.08 PQ: 0 ANSI: 5 And motherboard: description: Motherboard product: P8H67-M vendor: ASUSTeK Computer INC.

    Read the article

  • Windows XP Video Configuration Issues

    - by Matt
    Recently I had my motherboard burn out on me. Needing the machine for work, I purchased a different motherboard and installed that. Generally a reinstall of windows is good at that point but I am not in a position to do that so I just decided I would live with it for now. When I can log-in, everything works fine, what doesn't is getting to the log-in prompt to begin with. Basically when I first installed the new mobo, every time I rebooted the machine, I would not get the windows login prompt. One of the monitors would receive a signal but the screen would be black. Moving the mouse would not show the cursor and hitting the up arrow key and typing my password and hitting enter (which will normally log you in without mouse) wouldn't change anything. I would then change the monitor configuration around (2 lcd's and a crt) and reboot and at least one of the monitors would work and display the login prompt. I could then go into display properties and turn on the other monitors. However if I rebooted again, I would get the black screen on one monitor again. I would then have to change the configuration again to one not used before and I could re-do the manual setup at that point. I think windows saves the configurations so I had to keep giving it new ones. Needless to say I've been trying to not turn off my machine. Early this week I actually got the prompt to come up without playing musical monitors. Thinking everything was getting better, I found no harm in rebooting to install the latest windows updates. Boy was I wrong. Now no matter what I do I can't get a windows log-in prompt to display. I've tried almost every conceivable combination. The new mobo has onboard video so I set that in the bios (yea bios screen always displays fine, its not until windows boots that there is a problem) to be the primary video. Still no luck. I have two other graphics cards in the machine which I'm using. Tried all kinds of configurations between those and on-board but still get this black screen of death. I read somewhere that deleting the video drivers would reset the configurations. I logged into safe mode (which works on one monitor), and uninstalled the display drivers. Still no luck and when I booted back into safe mode, it wanted to install new hardware and the display adapters weren't there as expected. Anyone have any ideas? A fresh install would be a pain and I might be getting my old board back from RMA soon so not sure I want to go through with that just yet. Only thing I can think of is to continue to try other combinations like physically removing the graphics cards. They are both EVGA 8600 cards and the windows boot screen does display fwiw.

    Read the article

< Previous Page | 29 30 31 32 33 34 35 36 37 38 39 40  | Next Page >