Search Results

Search found 1543 results on 62 pages for 'motherboard'.

Page 34/62 | < Previous Page | 30 31 32 33 34 35 36 37 38 39 40 41  | Next Page >

  • Hardware recommendations / parts list for a modern, quiet ZFS NAS box - 2011-Feb edition [closed]

    - by dandv
    I want to build some really reliable storage for my data, and it seems that ZFS is the only filesystem at the moment that does live checksumming. That rules out DroboPro, so I'm looking to building a quiet ZFS NAS that would start with 4 2TB or larger hard drives. I'd like this system to be very reliable and relatively future-proof for 2-3 years, so I'm willing to invest some $$$ and buy higher end components. I did see questions here and on other forums about low-cost servers, but I'm not looking for those. I'd be super happy to go for an off-the-shelf solution, but I haven't found one that's quiet. I started doing the research (summarized on my wiki), but I realized that it just gets too complicated for what I know as a software dude, and I'm entering the analysis paralysis area. At this point, I'm basically looking for a parts list for a configuration that will work (and is modern), and I know there are folks around here who are way more competent than me. I've built computers and am comfortable assembling one and messing with *nix; I can follow guides; I just want to end the decision process for the hardware and software configuration. What I've researched so far (not that these are very modern components): Case: I think I've settled on the Antec Twelve Hundred case because it cools well, is quiet, and simply has 12 bays that allow elastic mounting. The SilverStone Raven is its counter-candidate, but I find its construction quite odd. For the PSU, I'm torn between Antec CP-850 and Nexus RX-8500, but I did this research more than a year ago. The Nexus has a very uniform power profile, and I'd rather not have the Antec spin up and down based on load. On the other hand, I'm not sure how often my file server will draw more than 400W under use. For the hard drives, I've read that WD Black drives are actually WD RE3 with a software setting changed. I'd also like to buy different drive types, not just 4 WDs. Recommendations? Right now I have a 2TB Hitachi Deskstar 7K300. For the motherboard, CPU and RAM I have no idea, other than the RAM must be ECC. I already asked a question here about ECC RAM, but I was misguided and was looking for a motherboard that would support USB 3.0 as well. I've learned to go with eSATA, or worry about USB later. Then there's the (liquid) cooling, Wi-Fi card, and FreeBSD vs. OpenSolaris Express. Lastly, I'm wondering if I can make this PC into a media server by adding a Blu-ray drive and a good sound card. But support for Blu-Ray is spotty on Linux, and I don't know if Windows 7 on VirtualBox would get sufficient hardware access to output HDMI or SPDIFF signals. (Running OpenSolaris virtualized is not an option because of the reliability risk.) Then there are HDCP concerns. Suggestions on that would be appreciated as well, but I don't want us to get sidetracked. A specific shopping list on the core components would be great, so I can start ordering, and in the meantime educate myself with regards to the other issues. Finally, I think this could become a great FAQ for those technically inclined to build their own ZFS server, but confused by the dizzying array of options out there, and I promise to compile the results and share my experience building and benchmarking the server.

    Read the article

  • Windows 7 is stuck at "Starting Windows" when I attempt to boot computer

    - by Eli
    Basically, whenever I turn on my computer, it gets to the Starting Windows phase and just stays there. The startup animation still plays, yet it gets nowhere. I have tried booting into safe mode, however it gets stuck at loading CLASSPNP.SYS. It then freezes there and doesn't continue booting. I have tried booting into recovery mode from the hard drive, and it freezes after displaying the background image. I have tried booting from a recovery CD, which works, and I was able to use system restore. However, using system restore did not fix it, and it still is stuck at the Starting Windows screen. I have tried booting a Windows CD (Windows 8 Retail Installer) to see if I could upgrade it to fix this issue, however that froze at a blank screen after it got past the boot logo. I have tried changing around the BIOS settings (including resetting), to no avail. I have tried re-plugging the internal PSU cables (this is a custom-built desktop), yet this has changed nothing. I can boot into a loopback Ubuntu install on the same drive, which works fine, other than the fact that it has issues with some of the USB ports and the network card. This system has worked fine for the past few months, completely stable, and nothing in the configuration has changed before this error started happening. Startup Repair on the Windows recovery CD doesn't find any issues. Unplugging my secondary hard drive or swapping around memory doesn't change anything. The hard drive itself is fine, it hasn't shown any signs of failure and once again, boots my other OS fine. If anyone could help with this, that would be great. I can't seem to find any possible solution to this. If it makes any difference, my system specs are as follows: AMD FX-8320 Gigabyte GA-970A-D3 4GB of DDR3 Radeon HD 6870 550w PSU I'd like to not have to reinstall Windows, for I have more than a terabyte of data that I would have to back up if that becomes the only option. EDIT: I have since tried the following: Tried the solution involving restoring files from RegBackup, which changed nothing. Tried testing everything with Hiren's boot CD, everything comes back as fine. Tried disabling everything unnecessary in the BIOS and unplugging everything unneeded, it still hangs. Tried swapping out every possible combination of RAM, it still has the same result. The RAM is not at fault it seems Tried every GPU I own (which is many!) and it still hangs at the exact same place. Tried minimizing the power consumption as much as possible, even using an old PCI graphics card. It still hangs at the same place in the same way, signifying that it's not the PSU at fault. Tried resetting the BIOS again, still nothing. Tried every possible combination of BIOS options, even downclocking everything, it still hangs in the same spot. Tried upgrading the BIOS from version FB to FD, which changed nothing. Based on this, I would conclude the motherboard to be at fault. Are there any other possibilities? I don't want to spend $150 for a new motherboard. EDIT 2: This is what it gets stuck at when I try to boot into safe mode: Note the slight graphical corruption at the top of the screen. No matter how I set up the system, this seems to be there. In addition, either it has stopped booting into safe mode now, or it takes upwards of 2+ hours, and I haven't left it running for that long.

    Read the article

  • Create a Bootable Ubuntu 9.10 USB Flash Drive

    - by Trevor Bekolay
    The Ubuntu Live CD isn’t just useful for trying out Ubuntu before you install it, you can also use it to maintain and repair your Windows PC. Even if you have no intention of installing Linux, every Windows user should have a bootable Ubuntu USB drive on hand in case something goes wrong in Windows. Creating a bootable USB flash drive is surprisingly easy with a small self-contained application called UNetbootin. It will even download Ubuntu for you! Note: Ubuntu will take up approximately 700 MB on your flash drive, so choose a flash drive with at least 1 GB of free space, formatted as FAT32. This process should not remove any existing files on the flash drive, but to be safe you should backup the files on your flash drive. Put Ubuntu on your flash drive UNetbootin doesn’t require installation; just download the application and run it. Select Ubuntu from the Distribution drop-down box, then 9.10_Live from the Version drop-down box. If you have a 64-bit machine, then select 9.10_Live_x64 for the Version. At the bottom of the screen, select the drive letter that corresponds to the USB drive that you want to put Ubuntu on. If you select USB Drive in the Type drop-down box, the only drive letters available will be USB flash drives. Click OK and UNetbootin will start doing its thing. First it will download the Ubuntu Live CD. Then, it will copy the files from the Ubuntu Live CD to your flash drive. The amount of time it takes will vary depending on your Internet speed, an when it’s done, click on Exit. You’re not planning on installing Ubuntu right now, so there’s no need to reboot. If you look at the USB drive now, you should see a bunch of new files and folders. If you had files on the drive before, they should still be present. You’re now ready to boot your computer into Ubuntu 9.10! How to boot into Ubuntu When the time comes that you have to boot into Ubuntu, or if you just want to test and make sure that your flash drive works properly, you will have to set your computer to boot off of the flash drive. The steps to do this will vary depending on your BIOS – which varies depending on your motherboard. To get detailed instructions on changing how your computer boots, search for your motherboard’s manual (or your laptop’s manual for a laptop). For general instructions, which will suffice for 99% of you, read on. Find the important keyboard keys When your computer boots up, a bunch of words and numbers flash across the screen, usually to be ignored. This time, you need to scan the boot-up screen for a few key words with some associated keys: Boot menu and Setup. Typically, these will show up at the bottom of the screen. If your BIOS has a Boot Menu, then read on. Otherwise, skip to the Hard: Using Setup section. Easy: Using the Boot Menu If your BIOS offers a Boot Menu, then during the boot-up process, press the button associated with the Boot Menu. In our case, this is ESC. Our example Boot Menu doesn’t have the ability to boot from USB, but your Boot Menu should have some options, such as USB-CDROM, USB-HDD, USB-FLOPPY, and others. Try the options that start with USB until you find one that works. Don’t worry if it doesn’t work – you can just restart and try again. Using the Boot Menu does not change the normal boot order on your system, so the next time you start up your computer it will boot from the hard drive as normal. Hard: Using Setup If your BIOS doesn’t offer a Boot Menu, then you will have to change the boot order in Setup. Note: There are some options in BIOS Setup that can affect the stability of your machine. Take care to only change the boot order options. Press the button associated with Setup. In our case, this is F2. If your BIOS Setup has a Boot tab, then switch to it and change the order such that one of the USB options occurs first. There may be several USB options, such as USB-CDROM, USB-HDD, USB-FLOPPY, and others; try them out to see which one works for you. If your BIOS does not have a boot tab, boot order is commonly found in Advanced CMOS Options. Note that this changes the boot order permanently until you change it back. If you plan on only plugging in a bootable flash drive when you want to boot from it, then you could leave the boot order as it is, but you may find it easier to switch the order back to the previous order when you reboot from Ubuntu. Booting into Ubuntu If you set the right boot option, then you should be greeted with the UNetbootin screen. Press enter to start Ubuntu with the default options, or wait 10 seconds for this to happen automatically. Ubuntu will start loading. It should go straight to the desktop with no need for a username or password. And that’s it! From this live desktop session, you can try out Ubuntu, and even install software that is not included in the live CD. Installed software will only last for the duration of your session – the next time you start up the live CD it will be back to its original state. Download UNetbootin from sourceforge.net Similar Articles Productive Geek Tips Create a Bootable Ubuntu USB Flash Drive the Easy WayReset Your Ubuntu Password Easily from the Live CDHow-To Geek on Lifehacker: Control Your Computer with Shortcuts & Speed Up Vista SetupHow To Setup a USB Flash Drive to Install Windows 7Speed up Your Windows Vista Computer with ReadyBoost TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional New Stinger from McAfee Helps Remove ‘FakeAlert’ Threats Google Apps Marketplace: Tools & Services For Google Apps Users Get News Quick and Precise With Newser Scan for Viruses in Ubuntu using ClamAV Replace Your Windows Task Manager With System Explorer Create Talking Photos using Fotobabble

    Read the article

  • Why did Ubuntu suddenly get so slow?

    - by user101383
    12.10 has been slowing down mysteriously. Normally, in past versions, I can log in, open Firefox, and it will pop up within seconds. 12.10 is like that upon install too, though once I install my old apps, it gets very slow by Ubuntu standards. After login the hard drive will just make noise for a while before the OS will do anything. Hardware: enter description: Desktop Computer product: XPS 8300 () vendor: Dell Inc. serial: B6G2WR1 width: 64 bits capabilities: smbios-2.6 dmi-2.6 vsyscall32 configuration: boot=normal chassis=desktop uuid=44454C4C-3600-1047-8032-C2C04F575231 core description: Motherboard product: 0Y2MRG vendor: Dell Inc. physical id: 0 version: A00 serial: ..CN7360419G04VQ. slot: To Be Filled By O.E.M. *cpu description: CPU product: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz vendor: Intel Corp. physical id: 4 bus info: cpu@0 version: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz serial: To Be Filled By O.E.M. slot: CPU 1 size: 1600MHz capacity: 1600MHz width: 64 bits clock: 100MHz capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes xsave avx lahf_lm ida arat epb xsaveopt pln pts dtherm tpr_shadow vnmi flexpriority ept vpid cpufreq configuration: cores=4 enabledcores=1 threads=2 *-cache:0 description: L1 cache physical id: 5 slot: L1-Cache size: 256KiB capacity: 256KiB capabilities: internal write-through unified *-cache:1 description: L2 cache physical id: 6 slot: L2-Cache size: 1MiB capacity: 1MiB capabilities: internal write-through unified *-cache:2 DISABLED description: L3 cache physical id: 7 slot: L3-Cache size: 8MiB capacity: 8MiB capabilities: internal write-back unified *-memory description: System Memory physical id: 20 slot: System board or motherboard size: 8GiB *-bank:0 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: NT2GC64B88B0NF-CG vendor: Nanya physical id: 0 serial: 7228183 slot: DIMM3 size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:1 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: NT2GC64B88B0NF-CG vendor: Nanya physical id: 1 serial: 1E28183 slot: DIMM1 size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:2 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: NT2GC64B88B0NF-CG vendor: Nanya physical id: 2 serial: 9E28183 slot: DIMM4 size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:3 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: NT2GC64B88B0NF-CG vendor: Nanya physical id: 3 serial: 5527183 slot: DIMM2 size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-firmware description: BIOS vendor: Dell Inc. physical id: 0 version: A05 date: 09/21/2011 size: 64KiB capacity: 4032KiB capabilities: mca pci upgrade shadowing escd cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb zipboot biosbootspecification *-pci description: Host bridge product: 2nd Generation Core Processor Family DRAM Controller vendor: Intel Corporation physical id: 100 bus info: pci@0000:00:00.0 version: 09 width: 32 bits clock: 33MHz *-pci:0 description: PCI bridge product: Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port vendor: Intel Corporation physical id: 1 bus info: pci@0000:00:01.0 version: 09 width: 32 bits clock: 33MHz capabilities: pci pm msi pciexpress normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:40 ioport:e000(size=4096) memory:fe600000-fe6fffff ioport:d0000000(size=268435456) *-display description: VGA compatible controller product: Juniper [Radeon HD 5700 Series] vendor: Advanced Micro Devices [AMD] nee ATI physical id: 0 bus info: pci@0000:01:00.0 version: 00 width: 64 bits clock: 33MHz capabilities: pm pciexpress msi vga_controller bus_master cap_list rom configuration: driver=radeon latency=0 resources: irq:44 memory:d0000000-dfffffff memory:fe620000-fe63ffff ioport:e000(size=256) memory:fe600000-fe61ffff *-multimedia description: Audio device product: Juniper HDMI Audio [Radeon HD 5700 Series] vendor: Advanced Micro Devices [AMD] nee ATI physical id: 0.1 bus info: pci@0000:01:00.1 version: 00 width: 64 bits clock: 33MHz capabilities: pm pciexpress msi bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:48 memory:fe640000-fe643fff *-communication description: Communication controller product: 6 Series/C200 Series Chipset Family MEI Controller #1 vendor: Intel Corporation physical id: 16 bus info: pci@0000:00:16.0 version: 04 width: 64 bits clock: 33MHz capabilities: pm msi bus_master cap_list configuration: driver=mei latency=0 resources: irq:45 memory:fe708000-fe70800f *-usb:0 description: USB controller product: 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 vendor: Intel Corporation physical id: 1a bus info: pci@0000:00:1a.0 version: 05 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:16 memory:fe707000-fe7073ff *-multimedia description: Audio device product: 6 Series/C200 Series Chipset Family High Definition Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 05 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:46 memory:fe700000-fe703fff *-pci:1 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 1 vendor: Intel Corporation physical id: 1c bus info: pci@0000:00:1c.0 version: b5 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:41 memory:fe500000-fe5fffff *-network description: Network controller product: BCM4313 802.11b/g/n Wireless LAN Controller vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=bcma-pci-bridge latency=0 resources: irq:16 memory:fe500000-fe503fff *-pci:2 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 4 vendor: Intel Corporation physical id: 1c.3 bus info: pci@0000:00:1c.3 version: b5 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:42 memory:fe400000-fe4fffff *-network description: Ethernet interface product: NetLink BCM57788 Gigabit Ethernet PCIe vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 01 serial: 18:03:73:e1:a7:71 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.123 duplex=full firmware=sb ip=192.168.1.3 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:47 memory:fe400000-fe40ffff *-usb:1 description: USB controller product: 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 vendor: Intel Corporation physical id: 1d bus info: pci@0000:00:1d.0 version: 05 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:23 memory:fe706000-fe7063ff *-isa description: ISA bridge product: H67 Express Chipset Family LPC Controller vendor: Intel Corporation physical id: 1f bus info: pci@0000:00:1f.0 version: 05 width: 32 bits clock: 33MHz capabilities: isa bus_master cap_list configuration: latency=0 *-storage description: SATA controller product: 6 Series/C200 Series Chipset Family SATA AHCI Controller vendor: Intel Corporation physical id: 1f.2 bus info: pci@0000:00:1f.2 version: 05 width: 32 bits clock: 66MHz capabilities: storage msi pm ahci_1.0 bus_master cap_list configuration: driver=ahci latency=0 resources: irq:43 ioport:f070(size=8) ioport:f060(size=4) ioport:f050(size=8) ioport:f040(size=4) ioport:f020(size=32) memory:fe705000-fe7057ff *-serial UNCLAIMED description: SMBus product: 6 Series/C200 Series Chipset Family SMBus Controller vendor: Intel Corporation physical id: 1f.3 bus info: pci@0000:00:1f.3 version: 05 width: 64 bits clock: 33MHz configuration: latency=0 resources: memory:fe704000-fe7040ff ioport:f000(size=32) *-scsi:0 physical id: 1 logical name: scsi0 capabilities: emulated *-disk description: ATA Disk product: Hitachi HUA72201 vendor: Hitachi physical id: 0.0.0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: JP4O serial: JPW9J0HD21BTZC size: 931GiB (1TB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 sectorsize=512 signature=000641dc *-volume:0 description: EXT4 volume vendor: Linux physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 logical name: / version: 1.0 serial: 4e3d91b7-fd38-4f44-a9e9-ba3c39b926ec size: 585GiB capacity: 585GiB capabilities: primary journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized configuration: created=2012-10-21 16:26:50 filesystem=ext4 lastmountpoint=/ modified=2012-10-29 18:12:08 mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,data=ordered mounted=2012-10-29 18:12:08 state=mounted *-volume:1 description: Extended partition physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 size: 7823MiB capacity: 7823MiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume description: Linux swap / Solaris partition physical id: 5 logical name: /dev/sda5 capacity: 7823MiB capabilities: nofs *-volume:2 description: Windows NTFS volume physical id: 3 bus info: scsi@0:0.0.0,3 logical name: /dev/sda3 version: 3.1 serial: 84a92aae-347b-7940-a2d1-f4745b885ef2 size: 337GiB capacity: 337GiB capabilities: primary bootable ntfs initialized configuration: clustersize=4096 created=2012-10-21 18:43:39 filesystem=ntfs modified_by_chkdsk=true mounted_on_nt4=true resize_log_file=true state=dirty upgrade_on_mount=true *-scsi:1 physical id: 2 logical name: scsi1 capabilities: emulated *-cdrom description: DVD-RAM writer product: DVDRWBD DH-12E3S vendor: PLDS physical id: 0.0.0 bus info: scsi@1:0.0.0 logical name: /dev/cdrom logical name: /dev/cdrw logical name: /dev/dvd logical name: /dev/dvdrw logical name: /dev/sr0 version: MD11 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 status=nodisc *-scsi:2 physical id: 3 bus info: usb@2:1.8 logical name: scsi6 capabilities: emulated scsi-host configuration: driver=usb-storage *-disk:0 description: SCSI Disk physical id: 0.0.0 bus info: scsi@6:0.0.0 logical name: /dev/sdb configuration: sectorsize=512 *-disk:1 description: SCSI Disk physical id: 0.0.1 bus info: scsi@6:0.0.1 logical name: /dev/sdc configuration: sectorsize=512 *-disk:2 description: SCSI Disk physical id: 0.0.2 bus info: scsi@6:0.0.2 logical name: /dev/sdd configuration: sectorsize=512 *-disk:3 description: SCSI Disk product: MS/MS-Pro vendor: Generic- physical id: 0.0.3 bus info: scsi@6:0.0.3 logical name: /dev/sde version: 1.03 serial: 3 capabilities: removable configuration: sectorsize=512 *-medium physical id: 0 logical name: /dev/sde

    Read the article

  • Disk Drive not working

    - by user287681
    The CD/DVD drive on my sisters' (I'm helping her shift from Win. XP (now officially deprecated by Microsoft) to Ubuntu) system. Now, it may end up being a failed attempt, all together (Almost the whole last year (when she's been on XP) the disk drive hasn't (not even powering on) been working.), I just want to make sure I've explored every remote possibility. Because I figure, "Huh, now that I've got Ubuntu running, instead of XP, that (just) might make a difference.". I have tried using the sudo lshw command in the terminal, to (seemingly) no avil, but, who knows, you might be able to make something out of it. Here's the output: kyra@kyra-Satellite-P105:~$ sudo lshw [sudo] password for kyra: kyra-satellite-p105 description: Notebook product: Satellite P105 () vendor: TOSHIBA version: PSPA0U-0TN01M serial: 96084354W width: 64 bits capabilities: smbios-2.4 dmi-2.4 vsyscall32 configuration: administrator_password=disabled boot=oem-specific chassis=notebook frontpanel_password=unknown keyboard_password=unknown power-on_password=disabled uuid=00900559-F88E-D811-82E0-00163680E992 *-core description: Motherboard product: Satellite P105 vendor: TOSHIBA physical id: 0 version: Not Applicable serial: 1234567890 *-firmware description: BIOS vendor: TOSHIBA physical id: 0 version: V4.70 date: 01/19/20092 size: 92KiB capabilities: isa pci pcmcia pnp upgrade shadowing escd cdboot acpi usb biosbootspecification *-cpu description: CPU product: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz vendor: Intel Corp. physical id: 4 bus info: cpu@0 version: Intel(R) Core(TM)2 CPU T5 slot: U2E1 size: 1667MHz capacity: 1667MHz width: 64 bits clock: 166MHz capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx x86-64 constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm lahf_lm dtherm cpufreq *-cache:0 description: L1 cache physical id: 5 slot: L1 Cache size: 16KiB capacity: 16KiB capabilities: asynchronous internal write-back *-cache:1 description: L2 cache physical id: 6 slot: L2 Cache size: 2MiB capabilities: burst external write-back *-memory description: System Memory physical id: c slot: System board or motherboard size: 2GiB capacity: 3GiB *-bank:0 description: SODIMM DDR2 Synchronous physical id: 0 slot: M1 size: 1GiB width: 64 bits *-bank:1 description: SODIMM DDR2 Synchronous physical id: 1 slot: M2 size: 1GiB width: 64 bits *-pci description: Host bridge product: Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub vendor: Intel Corporation physical id: 100 bus info: pci@0000:00:00.0 version: 03 width: 32 bits clock: 33MHz configuration: driver=agpgart-intel resources: irq:0 *-display:0 description: VGA compatible controller product: Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 03 width: 32 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:16 memory:d0200000-d027ffff ioport:1800(size=8) memory:c0000000-cfffffff memory:d0300000-d033ffff *-display:1 UNCLAIMED description: Display controller product: Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller vendor: Intel Corporation physical id: 2.1 bus info: pci@0000:00:02.1 version: 03 width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list configuration: latency=0 resources: memory:d0280000-d02fffff *-multimedia description: Audio device product: NM10/ICH7 Family High Definition Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 02 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:44 memory:d0340000-d0343fff *-pci:0 description: PCI bridge product: NM10/ICH7 Family PCI Express Port 1 vendor: Intel Corporation physical id: 1c bus info: pci@0000:00:1c.0 version: 02 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:40 ioport:3000(size=4096) memory:84000000-841fffff ioport:84200000(size=2097152) *-pci:1 description: PCI bridge product: NM10/ICH7 Family PCI Express Port 2 vendor: Intel Corporation physical id: 1c.1 bus info: pci@0000:00:1c.1 version: 02 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:41 ioport:4000(size=4096) memory:84400000-846fffff ioport:84700000(size=2097152) *-network description: Wireless interface product: PRO/Wireless 3945ABG [Golan] Network Connection vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 02 serial: 00:13:02:d6:d2:35 width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwl3945 driverversion=3.13.0-29-generic firmware=15.32.2.9 ip=10.110.20.157 latency=0 link=yes multicast=yes wireless=IEEE 802.11abg resources: irq:43 memory:84400000-84400fff *-pci:2 description: PCI bridge product: NM10/ICH7 Family PCI Express Port 3 vendor: Intel Corporation physical id: 1c.2 bus info: pci@0000:00:1c.2 version: 02 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:42 ioport:5000(size=4096) memory:84900000-84afffff ioport:84b00000(size=2097152) *-usb:0 description: USB controller product: NM10/ICH7 Family USB UHCI Controller #1 vendor: Intel Corporation physical id: 1d bus info: pci@0000:00:1d.0 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:23 ioport:1820(size=32) *-usb:1 description: USB controller product: NM10/ICH7 Family USB UHCI Controller #2 vendor: Intel Corporation physical id: 1d.1 bus info: pci@0000:00:1d.1 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:19 ioport:1840(size=32) *-usb:2 description: USB controller product: NM10/ICH7 Family USB UHCI Controller #3 vendor: Intel Corporation physical id: 1d.2 bus info: pci@0000:00:1d.2 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:18 ioport:1860(size=32) *-usb:3 description: USB controller product: NM10/ICH7 Family USB UHCI Controller #4 vendor: Intel Corporation physical id: 1d.3 bus info: pci@0000:00:1d.3 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:16 ioport:1880(size=32) *-usb:4 description: USB controller product: NM10/ICH7 Family USB2 EHCI Controller vendor: Intel Corporation physical id: 1d.7 bus info: pci@0000:00:1d.7 version: 02 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci-pci latency=0 resources: irq:23 memory:d0544000-d05443ff *-pci:3 description: PCI bridge product: 82801 Mobile PCI Bridge vendor: Intel Corporation physical id: 1e bus info: pci@0000:00:1e.0 version: e2 width: 32 bits clock: 33MHz capabilities: pci subtractive_decode bus_master cap_list resources: ioport:2000(size=4096) memory:d0000000-d00fffff ioport:80000000(size=67108864) *-pcmcia description: CardBus bridge product: PCIxx12 Cardbus Controller vendor: Texas Instruments physical id: 4 bus info: pci@0000:0a:04.0 version: 00 width: 32 bits clock: 33MHz capabilities: pcmcia bus_master cap_list configuration: driver=yenta_cardbus latency=176 maxlatency=5 mingnt=192 resources: irq:17 memory:d0004000-d0004fff ioport:2400(size=256) ioport:2800(size=256) memory:80000000-83ffffff memory:88000000-8bffffff *-firewire description: FireWire (IEEE 1394) product: PCIxx12 OHCI Compliant IEEE 1394 Host Controller vendor: Texas Instruments physical id: 4.1 bus info: pci@0000:0a:04.1 version: 00 width: 32 bits clock: 33MHz capabilities: pm ohci bus_master cap_list configuration: driver=firewire_ohci latency=64 maxlatency=4 mingnt=3 resources: irq:17 memory:d0007000-d00077ff memory:d0000000-d0003fff *-storage description: Mass storage controller product: 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD) vendor: Texas Instruments physical id: 4.2 bus info: pci@0000:0a:04.2 version: 00 width: 32 bits clock: 33MHz capabilities: storage pm bus_master cap_list configuration: driver=tifm_7xx1 latency=64 maxlatency=4 mingnt=7 resources: irq:17 memory:d0005000-d0005fff *-generic description: SD Host controller product: PCIxx12 SDA Standard Compliant SD Host Controller vendor: Texas Instruments physical id: 4.3 bus info: pci@0000:0a:04.3 version: 00 width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list configuration: driver=sdhci-pci latency=64 maxlatency=4 mingnt=7 resources: irq:17 memory:d0007800-d00078ff *-network description: Ethernet interface product: PRO/100 VE Network Connection vendor: Intel Corporation physical id: 8 bus info: pci@0000:0a:08.0 logical name: eth0 version: 02 serial: 00:16:36:80:e9:92 size: 10Mbit/s capacity: 100Mbit/s width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e100 driverversion=3.5.24-k2-NAPI duplex=half latency=64 link=no maxlatency=56 mingnt=8 multicast=yes port=MII speed=10Mbit/s resources: irq:20 memory:d0006000-d0006fff ioport:2000(size=64) *-isa description: ISA bridge product: 82801GBM (ICH7-M) LPC Interface Bridge vendor: Intel Corporation physical id: 1f bus info: pci@0000:00:1f.0 version: 02 width: 32 bits clock: 33MHz capabilities: isa bus_master cap_list configuration: driver=lpc_ich latency=0 resources: irq:0 *-ide description: IDE interface product: 82801GBM/GHM (ICH7-M Family) SATA Controller [IDE mode] vendor: Intel Corporation physical id: 1f.2 bus info: pci@0000:00:1f.2 version: 02 width: 32 bits clock: 66MHz capabilities: ide pm bus_master cap_list configuration: driver=ata_piix latency=0 resources: irq:19 ioport:1f0(size=8) ioport:3f6 ioport:170(size=8) ioport:376 ioport:18b0(size=16) *-serial UNCLAIMED description: SMBus product: NM10/ICH7 Family SMBus Controller vendor: Intel Corporation physical id: 1f.3 bus info: pci@0000:00:1f.3 version: 02 width: 32 bits clock: 33MHz configuration: latency=0 resources: ioport:18c0(size=32) *-scsi physical id: 1 logical name: scsi0 capabilities: emulated *-disk description: ATA Disk product: ST9250421AS vendor: Seagate physical id: 0.0.0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: SD13 serial: 5TH0B2HB size: 232GiB (250GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 sectorsize=512 signature=000d7fd5 *-volume:0 description: EXT4 volume vendor: Linux physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 logical name: / version: 1.0 serial: 13bb4bdd-8cc9-40e2-a490-dbe436c2a02d size: 230GiB capacity: 230GiB capabilities: primary bootable journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized configuration: created=2014-06-01 17:37:01 filesystem=ext4 lastmountpoint=/ modified=2014-06-01 21:15:21 mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,data=ordered mounted=2014-06-01 21:15:21 state=mounted *-volume:1 description: Extended partition physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 size: 2037MiB capacity: 2037MiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume description: Linux swap / Solaris partition physical id: 5 logical name: /dev/sda5 capacity: 2037MiB capabilities: nofs *-remoteaccess UNCLAIMED vendor: Intel physical id: 1 capabilities: inbound kyra@kyra-Satellite-P105:~$

    Read the article

  • How to Tell a Hardware Problem From a Software Problem

    - by Chris Hoffman
    Your computer seems to be malfunctioning — it’s slow, programs are crashing or Windows may be blue-screening. Is your computer’s hardware failing, or does it have a software problem that you can fix on your own? This can actually be a bit tricky to figure out. Hardware problems and software problems can lead to the same symptoms — for example, frequent blue screens of death may be caused by either software or hardware problems. Computer is Slow We’ve all heard the stories — someone’s computer slows down over time because they install too much software that runs at startup or it becomes infected with malware. The person concludes that their computer is slowing down because it’s old, so they replace it. But they’re wrong. If a computer is slowing down, it has a software problem that can be fixed. Hardware problems shouldn’t cause your computer to slow down. There are some rare exceptions to this — perhaps your CPU is overheating and it’s downclocking itself, running slower to stay cooler — but most slowness is caused by software issues. Blue Screens Modern versions of Windows are much more stable than older versions of Windows. When used with reliable hardware with well-programmed drivers, a typical Windows computer shouldn’t blue-screen at all. If you are encountering frequent blue screens of death, there’s a good chance your computer’s hardware is failing. Blue screens could also be caused by badly programmed hardware drivers, however. If you just installed or upgraded hardware drivers and blue screens start, try uninstalling the drivers or using system restore — there may be something wrong with the drivers. If you haven’t done anything with your drivers recently and blue screens start, there’s a very good chance you have a hardware problem. Computer Won’t Boot If your computer won’t boot, you could have either a software problem or a hardware problem. Is Windows attempting to boot and failing part-way through the boot process, or does the computer no longer recognize its hard drive or not power on at all? Consult our guide to troubleshooting boot problems for more information. When Hardware Starts to Fail… Here are some common components that can fail and the problems their failures may cause: Hard Drive: If your hard drive starts failing, files on your hard drive may become corrupted. You may see long delays when you attempt to access files or save to the hard drive. Windows may stop booting entirely. CPU: A failing CPU may result in your computer not booting at all. If the CPU is overheating, your computer may blue-screen when it’s under load — for example, when you’re playing a demanding game or encoding video. RAM: Applications write data to your RAM and use it for short-term storage. If your RAM starts failing, an application may write data to part of the RAM, then later read it back and get an incorrect value. This can result in application crashes, blue screens, and file corruption. Graphics Card: Graphics card problems may result in graphical errors while rendering 3D content or even just while displaying your desktop. If the graphics card is overheating, it may crash your graphics driver or cause your computer to freeze while under load — for example, when playing demanding 3D games. Fans: If any of the fans fail in your computer, components may overheat and you may see the above CPU or graphics card problems. Your computer may also shut itself down abruptly so it doesn’t overheat any further and damage itself. Motherboard: Motherboard problems can be extremely tough to diagnose. You may see occasional blue screens or similar problems. Power Supply: A malfunctioning power supply is also tough to diagnose — it may deliver too much power to a component, damaging it and causing it to malfunction. If the power supply dies completely, your computer won’t power on and nothing will happen when you press the power button. Other common problems — for example, a computer slowing down — are likely to be software problems. It’s also possible that software problems can cause many of the above symptoms — malware that hooks deep into the Windows kernel can cause your computer to blue-screen, for example. The Only Way to Know For Sure We’ve tried to give you some idea of the difference between common software problems and hardware problems with the above examples. But it’s often tough to know for sure, and troubleshooting is usually a trial-and-error process. This is especially true if you have an intermittent problem, such as your computer blue-screening a few times a week. You can try scanning your computer for malware and running System Restore to restore your computer’s system software back to its previous working state, but these aren’t  guaranteed ways to fix software problems. The best way to determine whether the problem you have is a software or hardware one is to bite the bullet and restore your computer’s software back to its default state. That means reinstalling Windows or using the Refresh or reset feature on Windows 8. See whether the problem still persists after you restore its operating system to its default state. If you still see the same problem – for example, if your computer is blue-screening and continues to blue-screen after reinstalling Windows — you know you have a hardware problem and need to have your computer fixed or replaced. If the computer crashes or freezes while reinstalling Windows, you definitely have a hardware problem. Even this isn’t a completely perfect method — for example, you may reinstall Windows and install the same hardware drivers afterwards. If the hardware drivers are badly programmed, the blue-screens may continue. Blue screens of death aren’t as common on Windows these days — if you’re encountering them frequently, you likely have a hardware problem. Most blue screens you encounter will likely be caused by hardware issues. On the other hand, other common complaints like “my computer has slowed down” are easily fixable software problems. When in doubt, back up your files and reinstall Windows. Image Credit: Anders Sandberg on Flickr, comedy_nose on Flickr     

    Read the article

  • Personal Technology – Laptop Screen Blank – No Post – No BIOS – No Boot

    - by Pinal Dave
    If your laptop Screen is Blank and there is no POST, BIOS or boot, you can follow the steps mentioned here and there are chances that it will work if there is no hardware failure inside. Step 1: Remove the power cord from the laptop Step 2: Remove the battery from the laptop Step 3: Hold power button (keep it pressed) for almost 60 seconds Step 4: Plug power back in laptop Step 5: Start computer and it should just start normally. Step 6: Now shut down Step 7: Insert the battery back in the laptop Step 8: Start laptop again and it should work Note 1: If your laptop does not work after inserting back the memory. Remove the memory and repeat above process. Do not insert the battery back as it is malfunctioning. Note 2: If your screen is faulty or have issues with your hardware (motherboard, screen or anything else) this method will not fix your computer. Those, who care about how I come up with this not SQL related blog post, here is the very funny true story. If you are a married man, you will know what I am going to describe next. May be you have faced the same situation or at least you feel and understand my situation. My wife’s computer suddenly stops working when she was searching for my daughter’s mathematics worksheets online. While the fatal accident happened with my wife’s computer (which was my loyal computer for over 4 years before she got it), I was working in my home office, fixing a high priority issue (live order’s database was corrupted) with one of the largest eCommerce websites.  While I was working on production server where I was fixing database corruption, my wife ran to my home office. Here is how the conversation went: Wife: This computer does not work. I: Restart it. Wife: It does not start. I: What did you do with it? Wife: Nothing, it just stopped working. I: Okey, I will look into it later, working on the very urgent issue. Wife: I was printing my daughter’s worksheet. I: Hm.. Okey. Wife: It was the mathematics worksheet, which you promised you will teach but you never get around to do it, so I am doing it myself. I: Thanks. I appreciate it. I am very busy with this issue as million dollar transaction are not happening as the database got corrupted and … Wife: So what … umm… You mean to say that you care about this customer more than your daughter. You know she got A+ in every other class but in mathematics she got only A. She missed that extra credit question. I: She is only 4, it is okay. Wife: She is 4.5 years old not 4. So you are not going to fix this computer which does not start at all. I think our daughter next time will even get lower grades as her dad is busy fixing something. I: Alright, I give up bring me that computer. Our daughter who was listening everything so far she finally decided to speak up. Daughter: Dad, it is a laptop not computer. I: Yes, sweety get that laptop here and your dad is going to fix the this small issue of million dollar issue later on. I decided to pay attention to my wife’s computer. She was right. No matter what I do, it will not boot up, it will not start, no BIOS, no POST screen. The computer starts for a second but nothing comes up on the screen. The light indicating hard drive comes up for a second and goes off. Nothing happens. I removed every single USB drive from the laptop but it still would not start. It was indeed no fun for me. Finally I remember my days when I was not married and used to study in University of Southern California, Los Angeles. I remembered that I used to have very old second (or maybe third or fourth) hand computer with me. In polite words, I had pre-owned computer and it used to face very similar issues again and again. I had small routine I used to follow to fix my old computer and I had decided to follow the same steps again with this computer. Step 1: Remove the power cord from the laptop Step 2: Remove the battery from the laptop Step 3: Hold power button (keep it pressed) for almost 60 seconds Step 4: Plug power back in laptop Step 5: Start computer and it should just start normally. Step 6: Now shut down Step 7: Insert the battery back in the laptop Step 8: Start laptop again and it should work Note 1: If your laptop does not work after inserting back the memory. Remove the memory and repeat above process. Do not insert the battery back as it is malfunctioning. Note 2: If your screen is faulty or have issues with your hardware (motherboard, screen or anything else) this method will not fix your computer. Once I followed above process, her computer worked. I was very delighted, that now I can go back to solving the problem where millions of transactions were waiting as I was fixing corrupted database and it the current state of the database was in emergency mode. Once I fixed the computer, I looked at my wife and asked. I: Well, now this laptop is back online, can I get guaranteed that she will get A+ in mathematics in this week’s quiz? Wife: Sure, I promise. I: Fantastic. After saying that I started to look at my database corruption and my wife interrupted me again. Wife: Btw, I forgot to tell you. Our daughter had got A in mathematics last week but she had another quiz today and she already have received A+ there. I kept my promise. I looked at her and she started to walk outside room, before I say anything my phone rang. DBA from eCommerce company had called me, as he was wondering why there is no activity from my side in last 10 minutes. DBA: Hey bud, are you still connected. I see um… no activity in last 10 minutes. I: Oh, well, I was just saving the world. I am back now. After two hours I had fixed the database corruption and everything was normal. I was outsmarted by my wife but honestly I still respect and love her the same as she is the one who spends countless hours with our daughter so she does not miss me and I can continue writing blogs and keep on doing technology evangelism. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: PostADay, SQL, SQL Authority, SQL Humor, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • Kubuntu 12.04 - Touchpad and keyboard stopped working at random

    - by StepTNT
    As in the title, I've got this problem with my Kubuntu 12.04. At first I've thought that the whole system was hung, but it happened again 5 minutes ago and, while the keyboard and the touchpad stopped working, the music was still playing, so I guess that's just an "input" problem, because the system was still working! Any solution? Is there some data that you need to know about my setup? EDIT: Added my lshw outout description: Notebook product: N53SV () vendor: ASUSTeK Computer Inc. version: 1.0 serial: B2N0AS17695408A width: 64 bits capabilities: smbios-2.6 dmi-2.6 vsyscall32 configuration: boot=normal chassis=notebook family=N uuid=8083F2DA-A43E-E081-3F3F-BCAEC55F8AA1 *-core description: Motherboard product: N53SV vendor: ASUSTeK Computer Inc. physical id: 0 version: 1.0 serial: BSN12345678901234567 slot: MIDDLE *-firmware description: BIOS vendor: American Megatrends Inc. physical id: 0 version: N53SV.214 date: 08/10/2011 size: 64KiB capacity: 2496KiB capabilities: pci upgrade shadowing cdboot bootselect edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer acpi usb smartbattery biosbootspecification *-cpu description: CPU product: Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz vendor: Intel Corp. physical id: 4 bus info: cpu@0 version: Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz serial: To Be Filled By O.E.M. slot: CPU 1 size: 800MHz capacity: 4GHz width: 64 bits clock: 100MHz capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer xsave avx lahf_lm ida arat epb xsaveopt pln pts tpr_shadow vnmi flexpriority ept vpid cpufreq configuration: cores=4 enabledcores=1 threads=2 *-cache description: L1 cache physical id: 5 slot: L1-Cache size: 32KiB capacity: 32KiB capabilities: internal write-back instruction *-memory description: System Memory physical id: 40 slot: System board or motherboard size: 10GiB *-bank:0 description: SODIMM DDR3 Synchronous 1333 MHz (0,8 ns) product: 99U5428-040.A00LF vendor: Kingston physical id: 0 serial: 103C28C3 slot: ChannelA-DIMM0 size: 4GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:1 description: SODIMM DDR3 Synchronous 1333 MHz (0,8 ns) product: HMT325S6BFR8C-H9 vendor: Hynix/Hyundai physical id: 1 serial: 58383D1F slot: ChannelA-DIMM1 size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:2 description: SODIMM DDR3 Synchronous 1333 MHz (0,8 ns) product: HMT325S6BFR8C-H9 vendor: Hynix/Hyundai physical id: 2 serial: 58183D19 slot: ChannelB-DIMM0 size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:3 description: SODIMM DDR3 Synchronous 1333 MHz (0,8 ns) product: HMT325S6BFR8C-H9 vendor: Hynix/Hyundai physical id: 3 serial: 58183C8F slot: ChannelB-DIMM1 size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-pci description: Host bridge product: 2nd Generation Core Processor Family DRAM Controller vendor: Intel Corporation physical id: 100 bus info: pci@0000:00:00.0 version: 09 width: 32 bits clock: 33MHz configuration: driver=agpgart-intel resources: irq:0 *-pci:0 description: PCI bridge product: Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port vendor: Intel Corporation physical id: 1 bus info: pci@0000:00:01.0 version: 09 width: 32 bits clock: 33MHz capabilities: pci pm msi pciexpress normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:40 ioport:d000(size=4096) memory:db000000-dc0fffff ioport:c0000000(size=301989888) *-generic UNCLAIMED description: Unassigned class product: Illegal Vendor ID vendor: Illegal Vendor ID physical id: 0 bus info: pci@0000:01:00.0 version: ff width: 32 bits clock: 66MHz capabilities: bus_master vga_palette cap_list configuration: latency=255 maxlatency=255 mingnt=255 resources: memory:db000000-dbffffff memory:c0000000-cfffffff memory:d0000000-d1ffffff ioport:d000(size=128) memory:dc000000-dc07ffff *-display description: VGA compatible controller product: 2nd Generation Core Processor Family Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:47 memory:dc400000-dc7fffff memory:b0000000-bfffffff ioport:e000(size=64) *-communication description: Communication controller product: 6 Series/C200 Series Chipset Family MEI Controller #1 vendor: Intel Corporation physical id: 16 bus info: pci@0000:00:16.0 version: 04 width: 64 bits clock: 33MHz capabilities: pm msi bus_master cap_list configuration: driver=mei latency=0 resources: irq:48 memory:df00b000-df00b00f *-usb:0 description: USB controller product: 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 vendor: Intel Corporation physical id: 1a bus info: pci@0000:00:1a.0 version: 05 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:16 memory:df008000-df0083ff *-multimedia description: Audio device product: 6 Series/C200 Series Chipset Family High Definition Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 05 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:49 memory:df000000-df003fff *-pci:1 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 1 vendor: Intel Corporation physical id: 1c bus info: pci@0000:00:1c.0 version: b5 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:41 ioport:c000(size=4096) memory:de600000-deffffff ioport:d4200000(size=10485760) *-pci:2 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 2 vendor: Intel Corporation physical id: 1c.1 bus info: pci@0000:00:1c.1 version: b5 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:42 ioport:b000(size=4096) memory:ddc00000-de5fffff ioport:d3700000(size=10485760) *-network description: Wireless interface product: AR9285 Wireless Network Adapter (PCI-Express) vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 01 serial: 48:5d:60:f2:2c:fd width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.2.0-24-generic firmware=N/A ip=192.168.1.6 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:ddc00000-ddc0ffff *-pci:3 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 4 vendor: Intel Corporation physical id: 1c.3 bus info: pci@0000:00:1c.3 version: b5 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:43 ioport:a000(size=4096) memory:dd200000-ddbfffff ioport:d2c00000(size=10485760) *-usb description: USB controller product: FL1000G USB 3.0 Host Controller vendor: Fresco Logic physical id: 0 bus info: pci@0000:04:00.0 version: 04 width: 32 bits clock: 33MHz capabilities: pm msi pciexpress xhci bus_master cap_list configuration: driver=xhci_hcd latency=0 resources: irq:19 memory:dd200000-dd20ffff *-pci:4 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 6 vendor: Intel Corporation physical id: 1c.5 bus info: pci@0000:00:1c.5 version: b5 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:44 ioport:9000(size=4096) memory:dc800000-dd1fffff ioport:d2100000(size=10485760) *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:05:00.0 logical name: eth0 version: 06 serial: bc:ae:c5:5f:8a:a1 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=rtl_nic/rtl8168e-2.fw latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:46 ioport:9000(size=256) memory:d2104000-d2104fff memory:d2100000-d2103fff *-usb:1 description: USB controller product: 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 vendor: Intel Corporation physical id: 1d bus info: pci@0000:00:1d.0 version: 05 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:23 memory:df007000-df0073ff *-isa description: ISA bridge product: HM65 Express Chipset Family LPC Controller vendor: Intel Corporation physical id: 1f bus info: pci@0000:00:1f.0 version: 05 width: 32 bits clock: 33MHz capabilities: isa bus_master cap_list configuration: latency=0 *-storage description: SATA controller product: 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller vendor: Intel Corporation physical id: 1f.2 bus info: pci@0000:00:1f.2 logical name: scsi0 logical name: scsi2 version: 05 width: 32 bits clock: 66MHz capabilities: storage msi pm ahci_1.0 bus_master cap_list emulated configuration: driver=ahci latency=0 resources: irq:45 ioport:e0b0(size=8) ioport:e0a0(size=4) ioport:e090(size=8) ioport:e080(size=4) ioport:e060(size=32) memory:df006000-df0067ff *-disk description: ATA Disk product: ST9750420AS vendor: Seagate physical id: 0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: 0002 serial: 5WS0A7QR size: 698GiB (750GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=e0c5913d *-volume:0 description: Windows FAT volume vendor: MSDOS5.0 physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 version: FAT32 serial: 4ce5-3acb size: 3004MiB capacity: 3004MiB capabilities: primary fat initialized configuration: FATs=2 filesystem=fat *-volume:1 description: EXT4 volume vendor: Linux physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 logical name: / version: 1.0 serial: c198cc2a-d86a-4460-a4d5-3fc0b21e439c size: 28GiB capacity: 28GiB capabilities: primary journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized configuration: created=2012-03-15 16:53:54 filesystem=ext4 lastmountpoint=/ modified=2012-05-02 18:52:04 mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,user_xattr,acl,barrier=1,data=ordered mounted=2012-05-09 19:06:01 state=mounted *-volume:2 description: Windows NTFS volume physical id: 3 bus info: scsi@0:0.0.0,3 logical name: /dev/sda3 version: 3.1 serial: 4c1cdebc-ec09-2947-a3b5-c1f9f1cddc1c size: 152GiB capacity: 152GiB capabilities: primary bootable ntfs initialized configuration: clustersize=4096 created=2011-02-22 16:02:47 filesystem=ntfs label=OS state=clean *-volume:3 description: Extended partition physical id: 4 bus info: scsi@0:0.0.0,4 logical name: /dev/sda4 size: 514GiB capacity: 514GiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume:0 description: Linux swap / Solaris partition physical id: 5 logical name: /dev/sda5 capacity: 10GiB capabilities: nofs *-logicalvolume:1 description: HPFS/NTFS partition physical id: 6 logical name: /dev/sda6 capacity: 504GiB *-cdrom description: DVD-RAM writer product: BD-MLT UJ240AS vendor: MATSHITA physical id: 1 bus info: scsi@2:0.0.0 logical name: /dev/cdrom logical name: /dev/cdrw logical name: /dev/dvd logical name: /dev/dvdrw logical name: /dev/sr0 version: 1.00 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 status=nodisc *-serial UNCLAIMED description: SMBus product: 6 Series/C200 Series Chipset Family SMBus Controller vendor: Intel Corporation physical id: 1f.3 bus info: pci@0000:00:1f.3 version: 05 width: 64 bits clock: 33MHz configuration: latency=0 resources: memory:df005000-df0050ff ioport:e040(size=32)

    Read the article

  • (0xC03A0014) Failed to add device 'Microsoft Virtual Hard Disk'

    - by maniargaurav
    We had Windows 2008 SP2 Server. It was crashed due to mother board problem. After we got new motherboard we have installed Windows 2008 R2. Now when we try to attach Old VHD File we are getting following issue. Failed to add device 'Microsoft Virtual Hard Disk'. Cannot open attachment 'D:\Test\test.vhd'. Error: 'A virtual disk support provider for the specified file was not found.' TestVM': Cannot open attachment 'D:\Test\test.vhd'. Error: 'A virtual disk support provider for the specified file was not found.' (0xC03A0014). (Virtual machine ID 5626AAB2-C21C-48FF-8B70-40671CBC573B)

    Read the article

  • Dell Optiplex 980 vs. Dell Studio XPS 9000?

    - by Dave
    My company is allowing me to upgrade to either the XPS 9000 or the Optiplex 980. I haven't bought an Optiplex in over a decade, and the only thing I can remember is that the Optiplex is really meant for corporate IT environments, and we're not even close being large enough to have IT issues. I think the components might be of higher quality as well, like the motherboard and power supply. The XPS 9000 is about $150 cheaper than the Optiplex, but the Optiplex has 4GB more RAM, a 2nd video card, and an extra year of service. Seems like the Optiplex is a better deal overall, but since I haven't ever used one, I wanted to see what everyone else here thought.

    Read the article

  • WOL for Asus M5A97 built in Realtek Network Adapter

    - by madphp
    I cant get wake on lan to work for my built in network adapter. Its a ASUS M5A97 motherboard, and the network adapter is a Realtek PCIe GBE. I have Shutdown WakeOnLan - Enabled Wake on Magic Packet - Enabled Wake on Pattern Match - Enabled WOL & Shutdown Link Speed - 10 Mbps First I have set up a magic packet client to listen, and the packet is getting through. I have also checked these in Power Management for the network adapter. Allow the computer to turn off this device to save power Allow this device to wake the computer Allow a magic packet to wake the computer.

    Read the article

  • Upgrade Intel Xeon Prestonia to a 64-bit processor

    - by IDisposable
    In theory, could I upgrade a mPGA604-socket motherboard with a Prestonia processor to some Intel Xeon processor with 64-bit? I've got a Dell PowerEdge 1750 with dual 2.8GHz Xeon processors running my Windows Home Server machine. I want to upgrade to the upcoming Vail release, but it is 64-bit only. The processors are Prestonia-core, which is pre-64bit, but I was wondering if it was possible to swap in some pin-compatible later generation processor. According to wikipedia, the mPGA604-socket continues to be used for several later generations that do have same pinout. So, IN THEORY, could I swap in a 64-bit, like a Nocona-core?

    Read the article

  • Recommendation for PHP-FPM pm.max_children, PHP-FPM pm.start_servers and others

    - by jaypabs
    I have the following server: Intel® Xeon® E3-1270 v2 Single Processor - Quad Core Dedicated Server CPU Speed: 4 x 3.5 Ghz w/ 8MB Smart Cache Motherboard: SuperMicro X9SCM-F Total Cores: 4 Cores + 8 Threads RAM: 32 GB DDR3 1333 ECC Hard Drive: 120GB Smart Cache: 8MB I am using ubuntu 12.04 - nginx, php, mysql with ISPConfig 3. Under ISPConfig 3 website settings: I have this default value: PHP-FPM pm.max_children = 10 PHP-FPM pm.start_servers = 2 PHP-FPM pm.min_spare_servers = 1 PHP-FPM pm.max_spare_servers = 5 PHP-FPM pm.max_requests = 0 My question is what is the recommended settings for the above variable? Because I found some using a different settings.

    Read the article

  • How do I build a DIY NAS?

    - by Kaushik Gopal
    I'm looking for good, detailed instructions on how to build a DIY NAS (Network Access Storage). I'm planning on doing it cheap (old PC config + open source software). I would like to know: What hardware I need to built one What kind of hard-drive setup I should take (like RAID) Or any other relevant hardware related advices (power supply, motherboard etc...) What software I should run on it, both what OS and software to manage the contents effectively So the NAS is recognizable and accessible to my network I can make sure my Windows computers will recognize it (when using Linux distro's) I can access my files from outside my network I already did a fair bit of searching and found these links, but while these links are great they delve more on the hardware side. I'm looking for more instructions in the software side. Ubuntu Setting up a Home NAS DIY NAS Smackdown How to Configure an $80 File Server in 45 Minutes FreeNAS Build a NAS Device With an Old PC and Free Software Build Your Own NAS Device

    Read the article

  • Windows 7 installation too slow

    - by BizApps
    I have P.C with Emaxx Motherboard : emx-a55gm-icafe with AMD dual core processor,500 GB WD Sata HDD,2GB of RAM,samsung dvdr,windows 7 dvd which is all brandnew. When i was trying to install windows 7 ulitmate on my P.C it really takes hours on setting up, which is really rare and i'm still hopeless getting a solution for this.But I don't have any issue installing windows 7 on my HP laptop that can be finished within just more than 20minutes. There is same issue that ive search in google and disabling the floppy disk drive in BIOS is their solution, but my problem is, Emaxx icafe doesnt have floppy disk drive setting on bios. I already change ACHI/IDE Support but i have still no luck. Is there any solution for this? Thanks in Regards

    Read the article

  • Bank Interleave Requested but not enabled

    - by wbeard52
    I have a ECS A770M-A motherboard with a 2.2GHz Phenom 64 Quad Core processor with 4 gigs of ram. I also have a 1GB DDR3 Zotac GeForce 9500GT video card installed in the computer. I believe the main memory is DDR2. The problem I am having is that I get a "Bank Interleave Requested but not Enabled" error on startup. The computer boots up fine (no error) with the 4gigs of ram if I replace the video card with the previous 256MB video card. I have also tried placing a single gig of ram in the computer with the Zotac video card and still get the error. My question is what would typically cause this error and would a DDR3 video ram be compatible with DDR2 system ram? Thanks

    Read the article

  • How to install Windows 7 onto software RAID-0

    - by Jay B
    I recently got a new laptop (Asus G73JH-A2) which has two identical hard drives in it. Unfortunately the motherboard does not have a RAID controller. What I would like to do is run the drives in a RAID-0 configuration to improve performance (plus get the extra capacity on one partition). I would like Windows installed onto the striped volume (RAID 0). I have spent some time using diskpart to create a striped volume across the two drives, however when I go to install windows and select the volume it will not let me select 'Next' giving the error "Windows cannot be installed to this hard disk space. The partition contains one or more dynamic volumes that are not supported for installation." I'm hoping theres a step that I am missing that will allow me to install windows on a striped volume. Any ideas?

    Read the article

  • New build won't POST, no video, no beeps

    - by Nate Koppenhaver
    Specs: Motherboard: MSI 760GM-P23 FX Integrated graphics (on MoBo) CPU: AMD Athlon II x4 640 RAM: GeIL Pristine 4GB DDR3 Case/PSU: TOPOWER TP-4107BB-400 Is not POSTing, no video output, no beeps. When RAM is removed, 3 beeps. I have tried removing and replacing the CPU and all the power cables with no change. Resetting the BIOS (by removing and replacing the battery) did nothing as well. Is there something I'm forgetting (1st time building from components), or could one of the components be bad? EDIT: New development: with CPU and RAM installed correctly, it will turn on lights and fans (still no POST) and after running for a minute or so it will turn off and the PSU will make a buzzing noise that ceases only when unplugged.

    Read the article

  • Windows 7 video driver for Intel 82865G graphics chipset

    - by Nick Kavadias
    I have an old Dell Inspirion 3000 which came with Windows XP. It's still quite decent, 3 GHz P4, 2 GB RAM. I've installed windows 7 RTM (x86) & the best resolution it will do is 640x480 with a generic driver. It has an integrated Intel 8265G graphics card, and only PCI slots on the motherboard. I cannot stick another graphics card on it. Can I get a working driver for Windows 7? Official Dell website only lists XP drivers Am I destined to have the suckiness of XP on this computer forever?

    Read the article

  • Access Western Digital My Book World II RAID array on my Ubuntu Linux

    - by ZeDalaye
    Hi, My WD My Book World II (Blue Rings) NAS has overheated, I think the motherboard is dead. I extracted the disks and plugged them in my desktop PC running Ubuntu Linux. The disks seems to be alive, they are spinning and the BIOS recognize them but Ubuntu is not able to boot as soon as these drives are plugged in. I got an initramfs shell after few minutes telling explaining that the root disk is not available. I suspect that one of my WD drives took the precedence on the system ? Considering that Ubuntu is able to boot and can see my Western Digital disks... is it possible to access the RAID 0 array ? How ? Many thanks for your help, regards, -- Pierre Yager

    Read the article

  • Can I flash a PCI-E device's Firmware in a VM if the VM has exclusive IOMMU access?

    - by RibaldEddie
    I have a PCI-E Dell Perc 6/i RAID card that I'd like to flash with the latest firmware. Apparently I need either a Redhat / Centos OS or Windows in order to flash the firmware, but I have a VMWare 5.0.1 ESX hypervisor installed on the box and a CentOS guest OS. My motherboard support IOMMU and I have successfully used VMWare's PCI Passthrough feature to give VMs exclusive access to a PCI-E device. Is it safe to flash the firmware of a PCI-E device if that device is passed through to a single VM using the passthrough feature of VMware? Or should I boot one of the supported OSes directly on the bare metal?

    Read the article

  • Disable SSD in ASUS 900 running Ubuntu 9.10

    - by ashays
    Recently I managed to completely mess up my ASUS 900, but I have no immediate desire to upgrade since it's only my travel laptop (and I'm waiting for a few months to see if anything interesting comes out). For now, though, I've hit an interesting problem. The 4GB SSD that is soldered onto the motherboard is broken. Since it's soldered on, there's really no hope of replacing it (I believe), so I've been solely running off the 16GB that is inserted into the mini pci-e slot. But since it can't read from the SSD it keeps giving me an error every time it tries to boot and read the ssd. Is there any way to either force Ubuntu to not check the drives on boot or disable the drive altogether, so that I don't have to sit through a 5 minute boot process each time I want to use the computer?

    Read the article

  • Mixing different generations of ATi video cards

    - by middaparka
    I'm heading in the direction of a three monitor set up and hence suspect I need to go the dual video card route. At the moment, I've a Radeon X1900GT driving two 19" monitors which I'd like to keep and augment with something like a Radeon 5570 which would drive a 22" display. As such, I'm just wondering how Catalyst will cope with this configuration and whether there are any other issues that I'm likely to encounter. In terms of the obvious, my motherboard has two PCI-E slots and my power supply has two video card power connectors, so I'm hopefully covered from that side of things. Thanks in advance.

    Read the article

  • Dolby Digital Live (DDL) on Asus Rampage II Gene (Creative X-Fi Extreme)

    - by kevyn
    Hi there, I have an Asus Rampage II Gene motherboard which has X-Fi extreme built in. I can get it to work with Windows 7 ok using the Creative drivers, however when I try and install the DDL/DTS add on pack from Creative I get the error message: "There are no supported audio device available. You need to close the application. Click OK to close the application now" I don't understand it because I have the Creative software installed ok and supporting the sound without any problems. In Device manager the audio device comes up as 'High definition audio device' and uses driver: 6.1.7600.16385 from Microsoft. I tried using the Creative drivers which show up as 'soundmax HD audio' however these do not allow any of the Creative products to run properly. Please can anyone offer any help? Or even just confirm that DDL can work with my onboard sound? Windows 7 Ultimate 64 bit 6GB DDR3 XFX GS8800 384mb Asus Rampage II Gene Intel i7 920 (2.66)

    Read the article

  • What is the minimum power supply wattage needed for a Pentium 2.4GHz system?

    - by scottmarlowe
    It looks like I've got a dead Antec True 330 power supply in an older desktop that has an Intel D845PESV motherboard, a Pentium 2.4GHz processor, 2 dvd/cd writers, 2 hard drives, and other typical devices. I have an even older computer that is not being used that has a 200W power supply. Can a 200W power supply drive what I've listed above? Or, put another way, what is the minimum power supply specs for the above system? (A new 350W power supply will run me $30--so buying a new one is not a problem--but I'm curious about the question nonetheless).

    Read the article

< Previous Page | 30 31 32 33 34 35 36 37 38 39 40 41  | Next Page >