Search Results

Search found 26223 results on 1049 pages for 'visual c 2008 express'.

Page 32/1049 | < Previous Page | 28 29 30 31 32 33 34 35 36 37 38 39  | Next Page >

• Word 2007 crashes on Server 2008 R2 terminal services

  - by John Rennie

  We are finding that Word 2007 (with SP2) crashes when used on a Windows 2008 R2 terminal server. Typically it crashes when you click File/Open or File/Save, but not every time. Maybe one time in four, and just to be really confusing, on a test server in my office I can't make it crash. I have just today set up a brand new shiny 2k8 R2 terminal server with as simple a setup as possible, e.g. no anti-virus to confuse things, and we're still seeing crashes. My question is has anyone else seen this, and if so any clues on what's happening? We have a support case open with Microsoft, and the MS support engineer has conceded it's happening, but has so far been unable to find the reason. On possible factor is that all the 2k8 R2 terminal servers I've seen this on have been Hyper-V VMs (running on a 2k8 R2 host). I'm about to put in a physical 2k8 R2 terminal server at the customer where we're seeing the most crashes, in case this is relevant. More news soon. Sorry if this posting seems a bit vague, but this has just bitten us and is causing a lot of pain and sleepless nights :-( If anyone can help I'll be enormously grateful! Update: we've given up and gone back to 2008 pre-R2. Both Office 2003 and 2007 both work fine now. I think there are some problems with TS in R2. Googling doesn't find much, so I thought it was just me. It's reassuring to find that someone else has seen the same problem.

  Read the article

• Terminal Server 2008: Installing 16-bit Application (FoxPro 2.6)

  - by JohnyD

  I have one physical Windows 2008 R2 server running Hyper-V. Running under Hyper-V I have a virtual Windows Server 2008 R2 server running Remote Desktop Services (Terminal Services). I'm preparing my applications using the "Install Application on Remote Desktop..." control panel app. So far so good. However, I am now trying to install FoxPro 2.6 which is a 16-bit windows application. When I try to install it I receive the message: "The version of this file is not compatible with the version of Windows you're running. Check your computer's system information to see whether you need an x86 (32-bit) or x64 (64-bit) version of the program, and then contact the software publisher". Is there any way around this? I'm in the middle of a large migration to thin-clients and foxpro 2.6, while it won't be around forever, is a very integral application for our data-entry personnel. How can I get this to work? Thanks in advance!

  Read the article

• Having trouble using psservice and sc.exe between Windows Server 2008 machines

  - by Teflon Mac

  I'm trying to control services on one W2k8 machine from another; no domain just a workgroup. The user account I'm logged in as is an administrator on both machines. I've tried both psservice and sc.exe. These work in a Windows Server 2003 environment but it looks like I need to an extra step or two due to the changed security model in 2008. Any ideas as to how grant permission to the Service Control Manager (psservice) or OpenService (sc)? I tried running the DOS window with "Run As Administrator" and it made no difference. With psservice I get the following D:\mydir>psservice \\REMOTESERVER -u "adminid" -p "adminpassword" start "Display Name of Service" PsService v2.22 - Service information and configuration utility Copyright (C) 2001-2008 Mark Russinovich Sysinternals - www.sysinternals.com Unable to access Service Control Manager on \\REMOTESERVER: Access is denied. In the remote server, I get the following message in the Security Log so I know I connect and login to the remote machine. I assume it then fails on a subsequent authorization step. The logoff message in the security log is just that ("An account was logged off."), so no extra info there. Special privileges assigned to new logon. Subject: Security ID: REMOTESERVER\adminid Account Name: adminid Account Domain: REMOTESERVER Logon ID: 0xxxxxxxx Privileges: SeSecurityPrivilege SeBackupPrivilege SeRestorePrivilege SeTakeOwnershipPrivilege SeDebugPrivilege SeSystemEnvironmentPrivilege SeLoadDriverPrivilege SeImpersonatePrivilege sc.exe is similar. The command syntax and error differs as below but I also see the same login message in the remote server's security log. D:\mydir>sc \\REMOTESERVER start "Registry Name of Service" [SC] StartService: OpenService FAILED 5: Access is denied.

  Read the article

• Non-functioning AutoFilter on Locked Cells in Office 2008 - works in Office 2007

  - by Sarcas

  I'm looking into a problem for someone, who works in a mixed OS environment. She has created an Excel spreadsheet in Office 2007 to act as a directory, with AutoFilter turned on for names, email addresses, departments etc. To make sure no one accidentally edits email addresses (for example), she has protected the work sheet. Accessing this worksheet on a PC running Excel 2007, everything runs as you'd expect. You can filter the sheet by any of the auto-filtered columns, and because the sheet is protected, the data integrity is guaranteed. However, if you access the sheet on a Mac running Excel 2008, you can't filter the columns. What's strange here is that the AutoFilter dropdown arrows do appear in each of the column headers as you would expect. It's just that nothing happens if you click on them. If you select one of the column header cells (say, 'First Name') and check the menu: Data-Filter, you can see that AutoFilter is ticked. As another datapoint, you also seem to be able to apply an Advanced filter to these rows on the protected sheets. Does anyone know why this might be? It seems to be a compatibility issue between Excel 2007/2008 (I know the codebase isn't the same), but I can't find any references to it in documentation or forums anywhere, and it would be good to know if there's a way around this. Thanks!

  Read the article

• Windows Server 2008 Stops Responding (Hyper-V Role Enabled)

  - by blackf0rk

  The machine is a brand new Dell Precision m6500, Core i5, 8GB RAM. Windows Server 2008 R2 (fully patched) with Hyper-V Role Enabled. Virtualization options in the BIOS are ON, SpeedStep is OFF, couldn't find C1E option in the BIOS to turn it off (I also got the impression that SpeedStep is C1E, but the Intel Product site lists them as separate "features." shrug) The server stops responding without any apparent reason. I've tried testing in multiple scenarios, all of which result in a crash at seemingly random times: With the Server sitting idle, no apps running. Server sitting idle with a Virtual Machine running. Using a BurnInTest application There's no blue screen. It doesn't restart. The screen just sits there. The keyboard backlight still responds and comes on with input, but nothing on the screen changes. There are no errors in the error log. I have to hold down the power button to turn it off. Doing memory tests on bootup results in no errors with the memory. I have a second identical system and the same thing happens there too. I've dual-booted into Windows 7 Profession x64 on this system with no problems. Further testing has shown that the issue is definitely related to Windows Server 2008 R2 and Hyper-V as it appears the crashing does not happen when the services are not running. I've installed all hotfixes relating to this issue (that I could find): 975530, 979444, 979491, 976427 System is still crashing without response.

  Read the article

• How to securely enable file sharing over PPTP on Windows 2008 Server

  - by Damage

  I have set up a Windows SBS 2003 domain (LAN) and a stand-alone Windows 2008 Server (web server) at another location (workgroup). I established PPTP VPN connection (SBS dials web server) over which users from LAN should be able to access web server. On web server I enabled TCP/IPv4 and File and Printer sharing protocol. It has a few external addresses (one of them is default) AND one local address (192.x.x.x) assigned to network adapter. Firewall allows port 445 for file sharing. There's the problem - I can not enable web server file shares to be visible to LAN users and ONLY to LAN users: From SBS I can access webserver but I cannot access webserver from LAN workstations (XP, Vista). I have had same configuration - I have just replaced old (web server) Windows 2003 server with 2008 so SBS settings are the same (static route, DNS etc.). How can I enable file sharing on web server for LAN workstations? Now I have opened File and printer sharing to the internet which is of course totaly unsecure. I tried to secure the tunnel so I moved RAS (VPN) connection (Network Center) on web server to "Private" profile and moved firewall port 445 to "Private" profile but suddenly file sharing does not work and I cannot telnet webserver on port 445. How can I secure file sharing so I do not have to open it to the internet?

  Read the article

• Windows 2008 Server cannot access any network share

  - by Ramesh

  Hello friends I run a Windows 2008 server with SP2. This server acts as a desktop alone. Recently, I switched between two networks (corporate and other) using this system. Ever since, I am unable to access any network share on the original network from where I installed and configured the desktop. The message I get is "Network path was not found". Note that I am able to access the internet and my corporate mail server. I am told this is a Vista and Windows 2008 specific problem and I have done everything I could think of: a) Deleted the second network settings from the desktop b) Installed a patch from MS that supposed took care of this problem (with MS clearly saying they had not tested this enough) c) The SP2 install was after the problem occurred and I went ahead with it in the hope that SP2 may have something that would fix this Some additional details: a) A system admin can log into this system from a remote terminal b) I cannot get into my own system using the hidden share C$ - for instance \mymachine\C$ gives me the same message as above - Network path not found c) I can log into my system remotely using mstsc d) I cannot create shares on this system - as an extension network printers are not detected I have an update for you: The error message is as follows - **Network Error** Windows cannot access \\network_share Check the spelling of the name. Otherwise there might a problem with your network. To try to identify and resolve network problems, click Diagnose. Clicking Diagnose gives Error Code: 0x80070035 The network path was not found. Any help will be appreciated Thanks

  Read the article

• Making OpenSSL work on PHP Windows 2008 server with FastCGI

  - by KacieHouser

  I have been researching all day. Here is what I have done: In C:/PHP/php.ini and C:/PHP/php-cgi-fcgi.ini I have made the extension_dir = "C:/PHP/ext" I uncommented extension=php_openssl.dll I went to http://windows.php.net/download/ and got the thread safe version with the PHP 5.4 (5.4.8) version of DLL's In C:/PHP/ext I replaced the php_openssl.dll with the one I downloaded In System32 and SysWOW64 I added the following DLL's ssleay.dll libeay.dll I restarted the IIS server in the Server Manager under Web Server and stopped and started the World Wide Web Publishing Service That didn't work, so I tried same thing with the unthreaded versions. I still get: Fatal error: Call to undefined function ftp_ssl_connect() in C:\inetpub\wwwroot\REMOVED_dev\save_data.php on line 5 Here are related things from phpinfo(): System Windows NT DEV-WEB1 6.1 build 7601 (Windows Server 2008 R2 Standard Edition Service Pack 1) i586 Compiler MSVC9 (Visual C++ 2008) Architecture x86 Configure Command cscript /nologo configure.js "--enable-snapshot-build" "--enable-debug-pack" "--disable-zts" "--disable-isapi" "--disable-nsapi" "--without-mssql" "--without-pdo-mssql" "--without-pi3web" "--with-pdo-oci=C:\php-sdk\oracle\instantclient10\sdk,shared" "--with-oci8=C:\php-sdk\oracle\instantclient10\sdk,shared" "--with-oci8-11g=C:\php-sdk\oracle\instantclient11\sdk,shared" "--with-enchant=shared" "--enable-object-out-dir=../obj/" "--enable-com-dotnet" "--with-mcrypt=static" "--disable-static-analyze" "--with-pgo" Server API CGI/FastCGI Configuration File (php.ini) Path C:\Windows Loaded Configuration File C:\PHP\php-cgi-fcgi.ini Scan this dir for additional .ini files (none) Additional .ini files parsed (none) Registered PHP Streams php, file, glob, data, http, ftp, zip, compress.zlib, compress.bzip2, https, ftps, sqlsrv, phar Registered Stream Socket Transports tcp, udp, ssl, sslv3, sslv2, tls FTP support enabled Protocols dict, file, ftp, ftps, gopher, http, https, imap, imaps, ldap, pop3, pop3s, rtsp, scp, sftp, smtp, smtps, telnet, tftp openssl OpenSSL support enabled OpenSSL Library Version OpenSSL 0.9.8t 18 Jan 2012 OpenSSL Header Version OpenSSL 0.9.8x 10 May 2012 What am I missing here?

  Read the article

• Windows Server 2008 RAID10

  - by JT

  Hello All, I am building a storage system for myself. I have a 16 bay SATA chasis and right now I have 1 x 500GB SATA for booting 8 x 1.5TB for data. 3Ware 9500S-8 RAID card where these 8 drives above are connected to. I am used to linux, but not in the RAID department. I have Windows experience too. What I am looking for is something that I can just let sit, be reliable and use for other items as well. (Like running test websites, Apache, MySQL, etc). This box is private on a Class-C subnet. My thought is to at least consider Windows Server 2008. I especially like the potential for NON-GUI Mode. Can Windows Server 2008 do a Software RAID 10 out of the box? Software RAID is better performance and better in case the raid needs to be moved to another machine? I just want to SCP files, so OpenSSH running on it? Can one install the GUI, but not use it unless they get in a bind? Is Windows a good idea or should I stick to a Linux Software RAID or FreeBSD + ZFS?

  Read the article

• Apache+PHP on Windows Server 2008

  - by Álvaro G. Vicario

  I've installed Apache/2.2 and PHP/5.3 lots of times under Windows XP, Windows Vista and Windows Server 2003. The official *.msi installers work fine and configure everything. Now I need to install them into a Windows Server 2008 R2 Standard 64-bit box and I'm facing nothing but problems: There are no official 64 bit binaries for Apache and no binaries at all for PHP (official or third-party). It's alright, I'll do with good 32 bits, but it's kind of surprising. Official documentation is vague, generic and completely unaware of UAC or any recent Windows security feature. The PHP installer is unable to configure mod_php and the Apache installer is unable to configure... well, Apache. After three hours I've finally reached the point where I'm installing everything in the root folder and assigning full control access to all users in all files and directories and all I've got is a PHP-less Apache server that's able to serve static pages. So I guess it's time to stop and think. My question is: Has anyone installed an Apache+PHP production server under Windows Server 2008 in a serious, secure and reliable way and documented the whole process? Or should I just find a bundle like XAMPP and the like that requires no installation? === EDIT === I've installed Xampp Lite 1.7.3 and everything was working in 5 minutes. I'd still like to find some documentation about installing the original packages: XAMPP installs tons of stuff I don't need and offers no tool to enable and disable PHP extensions.

  Read the article

• Windows Server 2008 R2 install reboots unexpectedly during "Completing installation" phase

  - by knda

  I am attempting to install Windows Server 2008 R2 onto a Cisco UCS C201 M2 rack mounted server but am having major difficulties and wondering if anyone has some insight or items they could recommend for me to look at to get this one resolved. Installation is being attempted via the Cisco remote console (using CIMC's Virtual dvd-rom).. following the first phase of Setup where the installation files are copied to the target hard drive, then a reboot occurs to load Setup from the HDD, mid-way in the "Completing Installation" phase the system then reboots unexpectedly. System configuration Cisco UCS C201 M2 (2RU rack mounted server) 16GB RAM, 2x 73GB 15K SAS, 4x 300GB 10k SAS Add-on cards - Intel quad-port GigE card (no fibre channel cards) Storage - LSI MegaRAID SAS 9261-8i. onboard SATA is disabled (no SATA drives connected) KVM - Belkin No physical DVD-ROM.. :( I have... Run memtest86+, no RAM faults Disabled/enabled SATA support (BIOS) Attempted install from USB DVD-ROM, no effect Attempted unattended install scripted via Cisco Configuration Manager DVD provided Removed Belkin KVM in case that was causing drama Discovered that the Cisco website is "awesome" for searching for PDFs/Drivers cough, reverted back to Google Downloaded latest LSI drivers from LSI's site and used during Server 2008 install checked Windows ISO against checksum's from MS site checked Windows ISO by using it for an install in a VM Running out of ways to troubleshoot this as I am not sure how to enable any sort of 'verbose' mode during the setup process. Next step I have planned is to remove the Intel NIC and try the installation again.. Edit: Problem was the "Cisco INTEL QUAD PT GBE" (1000/PT) .. will have to see if this card is faulty or if it's just drivers.. thanks for the help.

  Read the article

• Password Policy seems to be ignored for new Domain on Windows Server 2008 R2

  - by Earl Sven

  I have set up a new Windows Server 2008 R2 domain controller, and have attempted to configure the Default Domain Policy to permit all types of passwords. When I want to create a new user (just a normal user) in the Domain Users and Computers application, I am prevented from doing so because of password complexity/length reasons. The password policy options configured in the Default Domain Policy are not defined in the Default Domain Controllers Policy, but having run the Group Policy Modelling Wizard these settings do not appear to be set for the Domain Controllers OU, should they not be inherited from the Default Domain policy? Additionally, if I link the Default Domain policy to the Domain Controllers OU, the Group Policy Modelling Wizard indicates the expected values for complexity etc, but I still cannot create a new user with my desired password. The domain is running at the Windows Server 2008 R2 functional level. Any thoughts? Thanks! Update: Here is the "Account policy/Password policy" Section from the GPM Wizard: Policy Value Winning GPO Enforce password history 0 Passwords Remembered Default Domain Policy Maximum password age 0 days Default Domain Policy Minimum password age 0 days Default Domain Policy Minimum password length 0 characters Default Domain Policy Passwords must meet complexity Disabled Default Domain Policy These results were taken from running the GPM Wizard at the Domain Controllers OU. I have typed them out by hand as the system I am working on is standalone, this is why the table is not exactly the wording from the Wizard. Are there any other policies that could override the above? Thanks!

  Read the article

• How to setup an IPSec / GRE tunnel on Windows Server 2008

  - by qbeuek

  I have a Windows Server 2008 that has a single network interface configured with a public IP address. My business partner has a private network. From my server, I need to access all the devices on his private network, and those devices must be able to access my server. My business partner has a standard solution for these requirements. They will setup an IPSec + GRE tunnel to my server. They told me, that I will need an additional public IP address for this to work. If it really is necessary, there is no problem, I can get an additional public IP address, although it will be assigned to the same physical network interface. I assume that on my server I will have both public IP addresses and also the private IP address from the tunnel (the same that is visible for the devices inside the private network). What alternatives do I have? Is it possible to configure this tunnel on my Windows Server 2008? Can it be done using only Windows tools, or do I need an additional free / commercial VPN software? If it cannot be done directly on Windows, can I setup an additional virtual machine running Linux, that will handle the IPSec + GRE tasks? How to do it? If it cannot be done on a virtual linux box, will I have to buy and setup a Cisco router to handle the IPSec + GRE tasks? Thanks for your opinions. I'm watching this question to clarify any issues or questions.

  Read the article

• RRAS Public Address Pool on Windows Server 2008

  - by Art

  I have a Windows 2008 server with two NICs running RRAS and a small public website. It also does NAT for several other PCs on my network and everything works great. I have a block of 5 public static IPs from my ISP, one of which is bound to the public NIC in the Windows 2008 server. I would like to assign one of the remainging 4 public IPs to a machine on my private network. I thought I could do this by going into RRAS, selecting NAT under IPv4 and then adding the public IP address to the address pool and specifying a reservation for the machine I would like to use that address by adding its private ip address. When I do this, the machine I reserved the public IP address for seems to loose all outside network connectivity. I can still ping other PCs on my 192.168.0.* net, but anything outside is no longer reachable. When I remove the reservation, everything seems to work. After setting the reservation and right clicking on the external public interface and selecting 'Show Mappings' I can see outbound requests from my private address with the desired associated private address, however I do not see any inbound requests. What am I doing wrong/missing?

  Read the article

• Win 2008 R2 - copying TO disk is very slow, copying FROM is more or less okay

  - by avs099

  I have Windows 2008 R2 SP1 with 4 identical SATA disks (Seagate Barracude 7200) in RAID 5 array. It has 4Gb of memory; all recent updates are installed. Problem: when I copy large file from one folder to another, I get about 10MB/s average speed. When I read this file from network share via 1Gbps connection - I get about 25-30 MB/s. Both numbers seems to be low for me - but specifically I'm very frustrated with low write speed. there is no antivirus, no hyper-v, it's just a fileserver - i when i do my tests nobody else reads/write from it (we have only 4 people in a team, so I'm sure). Not sure if that matters, but there is only 1 logic disk "C" with all available space (1400 GB). I'm not an admin at all, so I have no idea where to look and what other information to provide. I did run performance monitor with "% idle time", "avg bytes read", "avg byte write" - here is the screenshot: I'm not sure why there are such obvious spikes. Any idea? Please let me know if you need me to provide more information - what counters should I check, etc. I'm very eager to get this solved. Thank you. UPDATE: we have another Windows 2008 R2 SP1 server with 2 RAID1 arrays - one is disk C (where windows is installed, another one is disk E). It is running Hyper-V and does not have antivirus. I noticed the following behavior when I copy large file (few GBs): C - C: about 50MB/sec C - E: about 55MB/sec E - E: 8MB/sec!!! E - C: 8MB/sec!!! what could cause this?? E drive is RAID1 array from same Seagate Barracuda 1TB drives..

  Read the article

• Remote Desktop *from* Windows 2008 R2 Server

  - by freefaller

  Summary: how do I create an RDC connection from a Windows 2008 server to another server? Our client will only allow us to connect to their server via a static IP address (which is fair enough), but unfortunately as we're a very small company we don't have one in the office. As a work around, we had the connection working through our old Windows 2003 server (dynamic-cloud from 1and1). .. however we have just rebuilt the server to run under Windows 2008 R2 (don't ask, but it was necessary), and now I simply cannot get the connection working. I have added an "Outbound Rule" to Windows Firewall with Advanced Security (TCP, All local ports, 3389 remote port - I have also tried the other way around). I have added a packet filter IP security rule with the same details. The 1and1 firewall rules (through their online control panel) allows for 3389 TCP and UDP. But it is simply not connecting (yes, the server is definitely on and able to accept connections) with the general error of... Remote Desktop can’t connect to the remote computer for one of these reasons: 1) Remote access to the server is not enabled 2) The remote computer is turned off 3) The remote computer is not available on the network Is there anything obvious I've missed - or something I can use to find out where the request is being blocked? The new server is using the exact same IP address as before, so I don't believe that would be an issue. Unless it's trying to use an IPv6 address rather than the old IPv4 address that it was before? I apologise that I am not a network person by trade, but I know more than anybody else in my office!!

  Read the article

• 2008 Sever Randomly reboots.

  - by Jeff

  I'm out of ideas here. We have a 2008 Server that keeps rebooting 2-3 times a day at completely random times with an "Unexpected Shutdown" event. There are no Dumps, no events leading to it just like it loses power then comes back online. I ran a Diagnostic of the power supply and it has had continuous power for months. In addition, the temperature of the processors are maxing out at 40 degrees Celsius. Anyone have any ideas how to figure out why this is restarting all the time? This is a DMZed Web server so it doesn't do too much process wise. Here are the specs: Host Name: ~~~ OS Name: Microsoft Windows Server 2008 R2 Standard OS Version: 6.1.7600 N/A Build 7600 OS Manufacturer: Microsoft Corporation OS Configuration: Standalone Server OS Build Type: Multiprocessor Free Registered Owner: Windows User Registered Organization: Product ID: ~~~ Original Install Date: 5/27/2010, 4:25:47 PM System Boot Time: 2/14/2011, 5:35:01 PM System Manufacturer: HP System Model: ProLiant DL380 G6 System Type: x64-based PC Processor(s): 1 Processor(s) Installed. [01]: Intel64 Family 6 Model 26 Stepping 5 GenuineIntel ~1586 Mhz BIOS Version: HP P62, 8/16/2010 Windows Directory: C:\Windows System Directory: C:\Windows\system32 Boot Device: \Device\HarddiskVolume1 System Locale: en-us;English (United States) Input Locale: en-us;English (United States) Time Zone: (UTC-05:00) Eastern Time (US & Canada) Total Physical Memory: 4,086 MB Available Physical Memory: 2,775 MB Virtual Memory: Max Size: 8,170 MB Virtual Memory: Available: 6,691 MB Virtual Memory: In Use: 1,479 MB Page File Location(s): C:\pagefile.sys

  Read the article

• Cannot find "IIS APPPOOL\{application pool name}" user account in Windows Server 2008

  - by MacGyver

  Normally when setting up IIS 7, I'm used to allowing permissions to user IIS APPPOOL\{application pool name} on the root folder of my web application(s). I also give permissions to IUSR (or the IIS_IUSRS user group. (Note, in Windows Server 2008, I found that IUSR isn't in that group by default, so I added it). In Windows Server 2008, I cannot find user IIS APPPOOL\{application pool name} under Security under the Windows Folder Properties. I'm using Windows Authentication in ASP.NET. I'm receiving a 401.1 on the page in Internet Explorer 8 after getting the authentication prompt. Mozilla Firefox also gave me a Windows authentication prompt, and got me into the site fine. Same with Google Chrome. How can I solve this one? HTTP Error 401.1 - Unauthorized You do not have permission to view this directory or page using the credentials that you supplied. Specific page information: Module: WindowsAuthenticationModule Notification: AuthenticateRequest Handler: PageHandlerFactory-ISAPI-4.0_32bit Error Code: 0x8009030e Requested URL: http://.....aspx Physical Path: C:\.........aspx Logon Method: Not yet determined Logon User: Not yet determined

  Read the article

• SQL 2008 SP1 crashing almost daily

  - by matijake

  Hey, almost every day our new DB crashes. It is virtual server residing on same hardware as 5 other servers, two of them beeing identical MS SQL2008sp1 and two Oracle 11g's so I can pretty much rule out hardware issues. Server has dedicated local LUN, 4vCPU and 8GB memory with 2GB windows swap file. It runs 4 instances. Primary instance is limited to 5GB memory and paralelism set to 4 running on MS SQL 2008 SP1 @ Windows Server 2008 Enterprise R2 x64. Only that primary instance is crashing. After it crashes nothing can connect to it, it's even impossible to shut it down through service manager. What I found in logs is: ***Stack Dump being sent to C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\LOG\SQLDump0081.txt SqlDumpExceptionHandler: Process 4788 generated fatal exception c0000005 EXCEPTION_ACCESS_VIOLATION. SQL Server i s terminating this process.     Whole log can be seen at: http://kabl.org/files/SQLDump0081.txt second crash log made second later at: http://kabl.org/files/SQLDump0082.txt I have analyzed mini crashdump with Microsoft tools, but no promising results. If it can help, here it is: http://kabl.org/files/SQLDump0081.mdmp Any ideas are greatly welcome, since it is becoming quite a pain in the ass to restart server almost every day :) Regrads, -Matija

  Read the article

• unable to destroy windows 2008 r2 failover cluster after SAN rebuild

  - by Zack

  I created a windows 2008 r2 failover cluster for a sql 2008 active/passive cluster. This two node cluster was using a SAN device for a quorum disk resource as well as MSDTC resource. Well....I decided to reconfigure the SAN device, but I didn't destroy the cluster first. Now that the quorum disk and mstdc disk are completely gone, the cluster is obviously not working. But, I can't even destroy the cluster and start again. I've tried from the Windows Clustering tool, as well as the command line. I was able to get the cluster service to start using the "/fixquorum" parameter. After doing this I was able to remove the passive node from the cluster, but it wouldn't let me destroy the cluster because the default resource group and msdtc are still attached as resources. I tried to delete these resources from both the GUI tool, as well as command line. It will either freeze for several minutes and crash the program, or once it even BSOD'd the server. Can someone advise on how to destroy this cluster so I can start over?

  Read the article

• Error creating ODBC connection to SQL Server 2008 Express

  - by DavidB

  When creating a System DSN, I get the error: Connection failed: SQLState: '08001' SQL Server Error: 2 [Microsoft][SQL Server Native Client 10.0]Named Pipes Provider: Could not open a connection to SQL Server [2]. Connection failed: SQLState: 'HYT00' SQL Server Error: 0 [Microsoft][SQL Server Native Client 10.0]Login timeout expired I'm running Vista Home Premium 64-bit SP2, and installed SQL Server 2008 Express Advanced without errors. I'll be using the database locally for an app installed on the same PC. I'm able to successfully connect with SQL Server Management Studio using Windows Authentication (my Windows account is a member of local Administrators), and I can successfully create a database with default ownership (defaults to my Windows account). SQL Server Configuration Manager shows that Shared Memory, TCP/IP, and Named Pipes are enabled for SQL Native Client 10.0 Configuration, SQL Native Client 10.0 Configuration (32bit), and SQL Server Network Configuration (SQLEXPRESS). The SQL Server (SQLEXPRESS) and SQL Server Reporting Services (SQLEXPRESS) services are running. When I create a system DSN, my driver choices are SQL server (sqlsrv32.dll 4-10-09), which gives a generic wizard, and SQL Server Native Client 10.0 (sqlncli10.dll 7-10-08), which gives the SQL Server 2008 wizard. I choose the latter. I enter name, description, and have tried both MyPCName and 127.0.0.1 for the server name (browsing turns up nothing). After clicking Next, I leave it at Integrated Windows authentication, and leave Connect to server for additional options checked. After clicking Next, I get the error above. I know it's probably a simple answer, (permission issue?) and I'm a SQL noob, so I appreciate anything that would point me in the right direction. Thanks!

  Read the article

• Windows Server 2008 R2 - Cannot Change DNS Domain Context on Some Machines

  - by Richie086

  So I have a small Windows Server 2008 R2 network consisting of a domain controller, a file server, sql server, etc. All machines are joined to a windows domain (CPUSHIELD.COM) and show up in Active Directory Users and Computers under the Computers OU. Each computer has a DNS record as well that was populated when I joined each computer to the domain. However, when I go to my SQL server VM (which is joined to CPUSHIELD.COM) and try to add domain users or groups to the local users or groups on my file server (which is a physical machine) or my sql server (which is a virtual machine), for some reason I cannot change the context to the CPUSHIELD.COM domain.. For example: Here is the really strange thing, I have two other servers on my network that do show CPUSHIELD.COM in the From This Location field (as I would expect with any machine joined to a domain) and I am able to search the local machine and/or domain for users/groups to add. I have done hundreds of Windows Server 2008 installs and this is the first time I have run into this issue. Any ideas? Let me know if you need more info

  Read the article

• How to diagnose website performance/app pool recycling with Windows 2008/IIS7

  - by ilasno

  Ok, so there are various symptoms here (clients and and our own employees complaining of intermittent slowdowns, getting 'kicked out' to login page or just having a save request not properly save the submitted data). The environment: Windows Server 2008 (Datacenter), Service Pack 2, 64-bit, 2x2.8 GHz processors, 7.5 GB RAM MS SQL Server 2008 (running on the same machine) IIS 7 There are ~10 websites running on the server, each in their own application pool - most of these pools are running in Integrated mode, 2 are in Classic, all are on .NET 2.0 and all run as ApplicationPoolIdentity. I'm trying to analyze, diagnose, and troubleshoot and am struggling with where to get more info about what could be happening. Here are some steps i have already taken: Set each application pool to recycle once per day, and removed any other automatic recycling Set a Virtual Memory Limit for each to 1024000KB (1GB) Enabled ALL 'Generate Recycle Event Log Entry' entries (Config Changes, Isapi Reported Unhealthy, Manual Recycle, Private Memory Limit Exceeded, Regular Time Interval, Request Limit Exceeded, Specific Time, Virtual Memory Limit Exceeded) I have seen the app pool processes recycle (in Task Manager) - a new one will start up, and then the first one dies off - and this has happened without the memory or time going over the settings. This is a fairly new server, and most of these came from Windows Server 2003/IIS6. Any 'next steps' for setting up information gathering, logging, diagnosing, etc. would be much appreciated! j

  Read the article

• RDP or SSH connection trough Windows 2008 server VPN hang after a while

  - by xt4fs

  I have been experiencing a very strange issue with our VPN setup on Windows Server 2008. That server is running as a Xen Virtual Machine. We use it for two purposes, permit our mobile workers to connect to another server hosted somewhere else that only allow that ip, and use it to RDP or ssh to many other virtual machine on the same server. The server has no performance issue and still a load of memory free. All other virtual machine has no problem whatsoever. Many of those virtual machine have public IP (web servers) and all their firewall are set to allow only ssh connection or RDP connection from their local interface. When I am connecting directly with either ssh or RDP to one of the other virtual machine everything run without any issues. However, when I am doing so through the VPN after some time the connection just hang, it usually continue after some time (5 or 10 minutes). It seems as more there is network usage more often it happen to a point where it is completely unusable. The worst thing I can do to hang it faster is to actually ping the vpn client IP from the local network, after some time the latency increase until it hang. This happen even if I do RDP to the local ip of the VPN server trough the VPN. The server report no problem and if I disconnect to the vpn and reconnect right away everything is alright. There is nothing wrong in the VPN server log. I have taught at the beginning that it could have been an issue with the Host server so I try to RDP,ssh directly to the guest and I have experience no issue while doing this, so it really seems to be a problem with the VPN server on Windows server 2008. Another very weird thing is it does not seems to be of any issue if you only do Internet (NAT) without trying to connect to any local ips.

  Read the article

• Windows Server 2008 R2 - VPN Folder Sharing Permissions

  - by daveywc

  I have setup VPN access to my Windows Server 2008 R2 server using RRAS. Clients can connect, run applications, view shares etc. My problem is that one of the applications that they use relies on some network shares. The application is not able to access the shares unless the user first goes into Windows Explorer and accesses the share, providing their user name and password (the same one that they use to connect via the VPN). Previously on a different Windows Server 2008 (not R2) this was not necessary i.e. the application and user could access the share without providing another user name and password. I have tried giving the Everyone group full control over the shared folder - both on the Security tab and in the Permissions area under Advanced Sharing on the Sharing tab. This still did not resolve the issue. (I don't really want to give Everyone access anyway - I was hoping that granting access to a group that the VPN users had membership of would be enough). I have also turned off password protected sharing in the Advanced Sharing Settings area of the Network and Sharing Center (under both Home or Work and Public). So my question is what is preventing my VPN users from having access to these folders without having to re-supply the same login and password that they use to access the VPN? And what is the best practice in this type of scenario?

  Read the article

< Previous Page | 28 29 30 31 32 33 34 35 36 37 38 39  | Next Page >