Search Results

Search found 10941 results on 438 pages for 'location'.

Page 320/438 | < Previous Page | 316 317 318 319 320 321 322 323 324 325 326 327  | Next Page >

  • Task Scheduler not able to execute .vbs scripts successfully

    - by Django Reinhardt
    Apologies if this has a really obvious answer! We have several daily tasks we run via a .vbs script on our server (through the Task Scheduler), and for months it has been fine, but recently we've hit a problem. The .vbs scripts stopped successfully executing (always timing out)... but could still be executed manually with no problems(!). Not knowing any good reason why the Task Scheduler should start having problems, we thought we'd try a little "creative thinking", and run the .vbs another way: Via a .bat file executed by the Task Scheduler. Again we hit weird issues, but with a little more debugging information, this time around. The .bat file run by Task Scheduler is nothing more than... CScript "C:\location\script.vbs" > Log.txt But after an attempt to run it, the Task Scheduler fails with the following error: 0x1: An incorrect function was called or an unknown function was called. The Log.txt (as output from the .bat file above) says: CScript Error: Initialization of the Windows Script Host failed. (Not enough storage is available to process this command. ) But get this: The .bat file executes perfectly (vbs script and all) if it's executed with a double click! There's only a problem when it's run by Task Scheduler. What the hell? We're running Windows Server 2008 R2 (x64) and yes, the Task Sheduler's results are the same whether the user is logged in or not. Also, the user that can run the scripts successfully manually, is also the same user that runs the scripts in Task Scheduler. Thanks for any help for this weird problem!

    Read the article

  • Group policy waited for the network subsystem

    - by the-wabbit
    In an AD domain with Windows Server 2008 R2 DCs users are complaining about delays in the bootup process of the clients. The group policy log reveals that the client is waiting ~ 20-50 seconds for "the network subsystem": Event 5322, GroupPolicy Group policy waited for 29687 milliseconds for the network subsystem at computer boot. This appears to be domain-specific as machines joining a different domain from the same network do not experience any delays and Event 5322 reports <1000 ms wait times at startup. It happens on virtual and physical machines alike, so it does not look like a hardware- or driver-related issue. Further investigation has shown that the client is taking its time before issuing DHCP requests. In the network traces, I can see IPv6 router solicitations and multicast DNS name registrations as soon as the network driver is loaded and the network connection is reported "up" in the event log (e1cexpress/36). Yet, the DHCPv4 client service seems to take another 15-50 seconds to start (Dhcp-Client/50036), so the IPv4 address remains unconfigured for a while. The DHCP client's messages in the event log are succeeding the service start of the "Sophos Anti-Virus" service (Sophos AV 10.3 package), which I suspect to be the culprit - the DHCP client service dependencies include the TDI Support driver which might be what Sophos is using to intercept network traffic: Network Location Awareness seems to break at startup as a side-effect, I see that off-site DCs are contacted due to what seems like a race condition between the GP client and the DHCP client / NLA service startup. I could set the Group Policy Client service to depend on NLA, yet this still would not eliminate the delay. Also, I am not all that sure that this is a good idea. Is there a known resolution which would eliminate the startup delay?

    Read the article

  • BSOD Before Windows Will Loads - Graphics Related

    - by Brian
    Alright deep breath here: (Windows 7 Home Premium 64 bit btw) Today I installed Star Craft 2 Beta. After trying to log in, it had some issues where it said my device stopped working (referring to my video device I have to imagine). After I force quit the game there were some random "hot" (various colors if i remember correctly) pixels on the screen. I decided to reboot and try again with similar results. I figured that maybe my display drivers could stand to be updated (I don't frequently update them as I don't often run into problems). I went out to nVidia's website and grabbed the latest drivers for Windows 7 64 bit GeForce 9 series. (I have SLi-ed 9800 GTs). Everything seemed to install fine and I performed the restart. This is when things went from bad (can't play SC2 beta ;) ) to worse (can't boot into windows!). Initially the very first splash screen - I think it's the bios splash screen - had lines of colored pixels covering it. It then displayed a screen that had lots of "(" on it. After that it showed the normal windows 7 splash screen as if it were going to load into Windows. Before getting much further, it BSODed on me. It was a 0x0000003B stop error. At nvlddmkm.sys. A little digging let verified that this was a problem with an nVidia graphics device, not a real shocker. Windows decided it would try to help me diagnose the problem, which it's only answer to was a System Restore, which did nothing to alleviate the problem. I was able to boot up fine in safe mode and was not able to roll back the driver, however I did uninstall the driver and reboot. I still had the graphical anomalies during the first two screens (same colored "."'s and weird "("'s), but there was NOT a stop error. Windows loaded up, found a default driver for the device and installed it and I restarted to let it load - and had yet another BSOD Stop error. Repeat driver uninstall, this time I reloaded the same version (I think it's possible that I was running a 32 bit version or a vista versus windows 7 version, but I don't have that information handy) of the nVidia driver from their website. Restart, same anomalies, same Stop Error. I am at a loss - At this point all I can think is that the firmware for the Video cards got fried or there's actual damage to the cards which I sincerely hope is not the case but the sooner I know the better. Any insight into what I might be able to do to troubleshoot/fix this problem would be most helpful. Attached below is a dump from DxDiag. Please let me know if there is more info that I could provide. ------------------ System Information ------------------ Time of this report: 3/18/2010, 23:22:48 Machine name: BRIAN-PC Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7600) (7600.win7_rtm.090713-1255) Language: English (Regional Setting: English) System Manufacturer: Dell Inc System Model: XPS 630i BIOS: Phoenix - AwardBIOS v6.00PG Processor: Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz (4 CPUs), ~2.3GHz Memory: 8192MB RAM Available OS Memory: 8190MB RAM Page File: 1855MB used, 14521MB available Windows Dir: C:\Windows DirectX Version: DirectX 11 DX Setup Parameters: Not found User DPI Setting: Using System DPI System DPI Setting: 96 DPI (100 percent) DWM DPI Scaling: Disabled DxDiag Version: 6.01.7600.16385 32bit Unicode DxDiag Previously: Crashed in DirectShow (stage 1). Re-running DxDiag with "dontskip" command line parameter or choosing not to bypass information gathering when prompted might result in DxDiag successfully obtaining this information ------------ DxDiag Notes ------------ Display Tab 1: No problems found. Sound Tab 1: No problems found. Sound Tab 2: No problems found. Sound Tab 3: No problems found. Input Tab: No problems found. -------------------- DirectX Debug Levels -------------------- Direct3D: 0/4 (retail) DirectDraw: 0/4 (retail) DirectInput: 0/5 (retail) DirectMusic: 0/5 (retail) DirectPlay: 0/9 (retail) DirectSound: 0/5 (retail) DirectShow: 0/6 (retail) --------------- Display Devices --------------- Card name: Manufacturer: Chip type: DAC type: Device Key: Enum\ Display Memory: n/a Dedicated Memory: n/a Shared Memory: n/a Current Mode: 1600 x 1200 (32 bit) (1Hz) Driver Name: Driver File Version: () Driver Version: DDI Version: unknown Driver Model: unknown Driver Attributes: Final Retail Driver Date/Size: , 0 bytes WHQL Logo'd: n/a WHQL Date Stamp: n/a Device Identifier: {D7B70EE0-4340-11CF-B123-B03DAEC2CB35} Vendor ID: 0x0000 Device ID: 0x0000 SubSys ID: 0x00000000 Revision ID: 0x0000 Driver Strong Name: Unknown Rank Of Driver: Unknown Video Accel: Deinterlace Caps: n/a D3D9 Overlay: n/a DXVA-HD: n/a DDraw Status: Not Available D3D Status: Not Available AGP Status: Not Available ------------- Sound Devices ------------- Description: Speakers (Realtek High Definition Audio) Default Sound Playback: Yes Default Voice Playback: Yes Hardware ID: HDAUDIO\FUNC_01&VEN_10EC&DEV_0888&SUBSYS_10280249&REV_1001 Manufacturer ID: 1 Product ID: 100 Type: WDM Driver Name: RTKVHD64.sys Driver Version: 6.00.0001.5667 (English) Driver Attributes: Final Retail WHQL Logo'd: n/a Date and Size: 8/18/2008 04:05:28, 1485592 bytes Other Files: Driver Provider: Realtek Semiconductor Corp. HW Accel Level: Basic Cap Flags: 0x0 Min/Max Sample Rate: 0, 0 Static/Strm HW Mix Bufs: 0, 0 Static/Strm HW 3D Bufs: 0, 0 HW Memory: 0 Voice Management: No EAX(tm) 2.0 Listen/Src: No, No I3DL2(tm) Listen/Src: No, No Sensaura(tm) ZoomFX(tm): No Description: Realtek Digital Output (Realtek High Definition Audio) Default Sound Playback: No Default Voice Playback: No Hardware ID: HDAUDIO\FUNC_01&VEN_10EC&DEV_0888&SUBSYS_10280249&REV_1001 Manufacturer ID: 1 Product ID: 100 Type: WDM Driver Name: RTKVHD64.sys Driver Version: 6.00.0001.5667 (English) Driver Attributes: Final Retail WHQL Logo'd: n/a Date and Size: 8/18/2008 04:05:28, 1485592 bytes Other Files: Driver Provider: Realtek Semiconductor Corp. HW Accel Level: Basic Cap Flags: 0x0 Min/Max Sample Rate: 0, 0 Static/Strm HW Mix Bufs: 0, 0 Static/Strm HW 3D Bufs: 0, 0 HW Memory: 0 Voice Management: No EAX(tm) 2.0 Listen/Src: No, No I3DL2(tm) Listen/Src: No, No Sensaura(tm) ZoomFX(tm): No Description: Realtek HDMI Output (Realtek High Definition Audio) Default Sound Playback: No Default Voice Playback: No Hardware ID: HDAUDIO\FUNC_01&VEN_10EC&DEV_0888&SUBSYS_10280249&REV_1001 Manufacturer ID: 1 Product ID: 100 Type: WDM Driver Name: RTKVHD64.sys Driver Version: 6.00.0001.5667 (English) Driver Attributes: Final Retail WHQL Logo'd: n/a Date and Size: 8/18/2008 04:05:28, 1485592 bytes Other Files: Driver Provider: Realtek Semiconductor Corp. HW Accel Level: Basic Cap Flags: 0x0 Min/Max Sample Rate: 0, 0 Static/Strm HW Mix Bufs: 0, 0 Static/Strm HW 3D Bufs: 0, 0 HW Memory: 0 Voice Management: No EAX(tm) 2.0 Listen/Src: No, No I3DL2(tm) Listen/Src: No, No Sensaura(tm) ZoomFX(tm): No --------------------- Sound Capture Devices --------------------- Description: Microphone (Realtek High Definition Audio) Default Sound Capture: Yes Default Voice Capture: Yes Driver Name: RTKVHD64.sys Driver Version: 6.00.0001.5667 (English) Driver Attributes: Final Retail Date and Size: 8/18/2008 04:05:28, 1485592 bytes Cap Flags: 0x0 Format Flags: 0x0 Description: Realtek Digital Input (Realtek High Definition Audio) Default Sound Capture: No Default Voice Capture: No Driver Name: RTKVHD64.sys Driver Version: 6.00.0001.5667 (English) Driver Attributes: Final Retail Date and Size: 8/18/2008 04:05:28, 1485592 bytes Cap Flags: 0x0 Format Flags: 0x0 ------------------- DirectInput Devices ------------------- Device Name: Mouse Attached: 1 Controller ID: n/a Vendor/Product ID: n/a FF Driver: n/a Device Name: Keyboard Attached: 1 Controller ID: n/a Vendor/Product ID: n/a FF Driver: n/a Device Name: ESA FW Update Attached: 1 Controller ID: 0x0 Vendor/Product ID: 0x0955, 0x000A FF Driver: n/a Poll w/ Interrupt: No ----------- USB Devices ----------- + USB Root Hub | Vendor/Product ID: 0x10DE, 0x026D | Matching Device ID: usb\root_hub | Service: usbhub | +-+ USB Input Device | | Vendor/Product ID: 0x0955, 0x000A | | Location: Port_#0002.Hub_#0001 | | Matching Device ID: generic_hid_device | | Service: HidUsb | | | +-+ HID-compliant device | | | Vendor/Product ID: 0x0955, 0x000A | | | Matching Device ID: hid_device | | +-+ USB Input Device | | Vendor/Product ID: 0x046D, 0xC01E | | Location: Port_#0003.Hub_#0001 | | Matching Device ID: generic_hid_device | | Service: HidUsb | | | +-+ HID-compliant mouse | | | Vendor/Product ID: 0x046D, 0xC01E | | | Matching Device ID: hid_device_system_mouse | | | Service: mouhid ---------------- Gameport Devices ---------------- ------------ PS/2 Devices ------------ + Standard PS/2 Keyboard | Matching Device ID: *pnp0303 | Service: i8042prt | + Terminal Server Keyboard Driver | Matching Device ID: root\rdp_kbd | Upper Filters: kbdclass | Service: TermDD | + Terminal Server Mouse Driver | Matching Device ID: root\rdp_mou | Upper Filters: mouclass | Service: TermDD ------------------------ Disk & DVD/CD-ROM Drives ------------------------ Drive: C: Free Space: 324.3 GB Total Space: 608.4 GB File System: NTFS Model: WDC WD64 00AAKS-75A7B SCSI Disk Device Drive: D: Free Space: 1.0 GB Total Space: 2.0 GB File System: NTFS Model: WDC WD64 00AAKS-75A7B SCSI Disk Device Drive: E: Model: TSSTcorp DVD+-RW TS-H653F SCSI CdRom Device Driver: c:\windows\system32\drivers\cdrom.sys, 6.01.7600.16385 (English), , 0 bytes -------------- System Devices -------------- Name: PCI standard PCI-to-PCI bridge Device ID: PCI\VEN_10DE&DEV_03B7&SUBSYS_000010DE&REV_A1\3&2411E6FE&1&18 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03AF&SUBSYS_02491028&REV_A1\3&2411E6FE&1&0A Driver: n/a Name: PCI standard host CPU bridge Device ID: PCI\VEN_10DE&DEV_03A3&SUBSYS_02491028&REV_A2\3&2411E6FE&1&00 Driver: n/a Name: NVIDIA nForce Serial ATA Controller Device ID: PCI\VEN_10DE&DEV_0267&SUBSYS_02491028&REV_A1\3&2411E6FE&1&78 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03B6&SUBSYS_02491028&REV_A1\3&2411E6FE&1&10 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03AE&SUBSYS_02491028&REV_A1\3&2411E6FE&1&09 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_0272&SUBSYS_02491028&REV_A3\3&2411E6FE&1&52 Driver: n/a Name: NVIDIA nForce Serial ATA Controller Device ID: PCI\VEN_10DE&DEV_0266&SUBSYS_02491028&REV_A1\3&2411E6FE&1&70 Driver: n/a Name: LSI 1394 OHCI Compliant Host Controller Device ID: PCI\VEN_11C1&DEV_5811&SUBSYS_02491028&REV_70\4&14591D7E&0&2880 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03B5&SUBSYS_02491028&REV_A1\3&2411E6FE&1&06 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03AD&SUBSYS_02491028&REV_A1\3&2411E6FE&1&08 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_0270&SUBSYS_02491028&REV_A2\3&2411E6FE&1&48 Driver: n/a Name: Standard Dual Channel PCI IDE Controller Device ID: PCI\VEN_10DE&DEV_0265&SUBSYS_02491028&REV_A1\3&2411E6FE&1&68 Driver: n/a Name: NVIDIA GeForce 9800 GT Device ID: PCI\VEN_10DE&DEV_0605&SUBSYS_062D10DE&REV_A2\4&4BABE2A&0&0028 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03B4&SUBSYS_02491028&REV_A1\3&2411E6FE&1&07 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03AC&SUBSYS_02491028&REV_A1\3&2411E6FE&1&01 Driver: n/a Name: PCI standard PCI-to-PCI bridge Device ID: PCI\VEN_10DE&DEV_026F&SUBSYS_CB8410DE&REV_A2\3&2411E6FE&1&80 Driver: n/a Name: NVIDIA nForce PCI System Management Device ID: PCI\VEN_10DE&DEV_0264&SUBSYS_02491028&REV_A3\3&2411E6FE&1&51 Driver: n/a Name: NVIDIA GeForce 9800 GT Device ID: PCI\VEN_10DE&DEV_0605&SUBSYS_062D10DE&REV_A2\4&10BD3C89&0&0018 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03B3&SUBSYS_02491028&REV_A1\3&2411E6FE&1&0E Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03AB&SUBSYS_02491028&REV_A1\3&2411E6FE&1&04 Driver: n/a Name: Standard Enhanced PCI to USB Host Controller Device ID: PCI\VEN_10DE&DEV_026E&SUBSYS_02491028&REV_A3\3&2411E6FE&1&59 Driver: n/a Name: PCI standard ISA bridge Device ID: PCI\VEN_10DE&DEV_0260&SUBSYS_02491028&REV_A3\3&2411E6FE&1&50 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03BC&SUBSYS_02491028&REV_A1\3&2411E6FE&1&11 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03B2&SUBSYS_02491028&REV_A1\3&2411E6FE&1&0D Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03AA&SUBSYS_02491028&REV_A1\3&2411E6FE&1&02 Driver: n/a Name: Standard OpenHCD USB Host Controller Device ID: PCI\VEN_10DE&DEV_026D&SUBSYS_02491028&REV_A3\3&2411E6FE&1&58 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03BA&SUBSYS_02491028&REV_A1\3&2411E6FE&1&12 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03B1&SUBSYS_02491028&REV_A1\3&2411E6FE&1&0C Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03A9&SUBSYS_02491028&REV_A1\3&2411E6FE&1&03 Driver: n/a Name: High Definition Audio Controller Device ID: PCI\VEN_10DE&DEV_026C&SUBSYS_02491028&REV_A2\3&2411E6FE&1&81 Driver: n/a Name: PCI standard PCI-to-PCI bridge Device ID: PCI\VEN_10DE&DEV_03B8&SUBSYS_000010DE&REV_A1\3&2411E6FE&1&28 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03B0&SUBSYS_02491028&REV_A1\3&2411E6FE&1&0B Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03A8&SUBSYS_02491028&REV_A2\3&2411E6FE&1&05 Driver: n/a Name: NVIDIA nForce Networking Controller Device ID: PCI\VEN_10DE&DEV_0269&SUBSYS_02491028&REV_A3\3&2411E6FE&1&A0 Driver: n/a --------------- EVR Power Information --------------- Current Setting: {5C67A112-A4C9-483F-B4A7-1D473BECAFDC} (Quality) Quality Flags: 2576 Enabled: Force throttling Allow half deinterlace Allow scaling Decode Power Usage: 100 Balanced Flags: 1424 Enabled: Force throttling Allow batching Force half deinterlace Force scaling Decode Power Usage: 50 PowerFlags: 1424 Enabled: Force throttling Allow batching Force half deinterlace Force scaling Decode Power Usage: 0

    Read the article

  • FTP timing out after login

    - by Imran
    For some reasons I cant access any of my accounts on my dedicated server via FTP. It simply times out when it tried to display the directories. Heres a log from FileZila... Status: Resolving address of testdomain.com Status: Connecting to 64.237.58.43:21... Status: Connection established, waiting for welcome message... Response: 220---------- Welcome to Pure-FTPd [TLS] ---------- Response: 220-You are user number 3 of 50 allowed. Response: 220-Local time is now 19:39. Server port: 21. Response: 220-This is a private system - No anonymous login Response: 220-IPv6 connections are also welcome on this server. Response: 220 You will be disconnected after 15 minutes of inactivity. Command: USER testaccount Response: 331 User testaccount OK. Password required Command: PASS ******** Response: 230-User testaccount has group access to: testaccount Response: 230 OK. Current restricted directory is / Command: SYST Response: 215 UNIX Type: L8 Command: FEAT Response: 211-Extensions supported: Response: EPRT Response: IDLE Response: MDTM Response: SIZE Response: REST STREAM Response: MLST type*;size*;sizd*;modify*;UNIX.mode*;UNIX.uid*;UNIX.gid*;unique*; Response: MLSD Response: ESTP Response: PASV Response: EPSV Response: SPSV Response: ESTA Response: AUTH TLS Response: PBSZ Response: PROT Response: 211 End. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (64,237,58,43,145,153) Command: MLSD Response: 150 Accepted data connection Response: 226-ASCII Response: 226-Options: -a -l Response: 226 18 matches total Error: Connection timed out Error: Failed to retrieve directory listing I have restarted the FTP service serveral times but still It doesnt loads. I only have this problem when my server is reaching it peak usage which is still only 1.0 (4 cores), 40% of 4GB ram. The ftp connections isnt maxed out because only me and my colleague have access to FTP on the server.

    Read the article

  • How to install mcrypt on RHEL5

    - by wag2639
    We have an RHEL5 server that I'm trying to install PHP-Mcrypt on and I'm stuck when I tried to run ./configure for mcrypt source files. I was using this guide: http://atlantatechpro.com/howtos/howtoslinux/howtosmhashmcrypt When I try to install (./configure) mcrypt, I get this checking for libmcrypt - version = 2.5.0... no Could not run libmcrypt test program, checking why... The test program compiled, but did not run. This usually means that the run-time linker is not finding LIBMCRYPT or finding the wrong version of LIBMCRYPT. If it is not finding LIBMCRYPT, you'll need to set your LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point to the installed location Also, make sure you have run ldconfig if that is required on your system If you have an old version installed, it is best to remove it, although you may also be able to get things to work by modifying LD_LIBRARY_PATH configure: error: * libmcrypt was not found I also made a file at /etc/ld.so.conf.d/libmcrypt.conf with /usr/local/libmcrypt in it and ran /sbin/ldconfig I might have screwed things up by trying to reinstall libmcrypt without the configure arguments. Any suggestions on what to do now?

    Read the article

  • Vagrant synced folders aren't case sensitive

    - by lvmisooners
    For our web stack, we are moving from a Windows Server to CentOS. To facilitate development, we're utilizing Vagrant to run CentOS VMs locally. We're using Vagrant's Synced Folders feature to allow devs to use their favorite IDEs on their host machine, but we're finding that one key feature is missing from this setup: file system case sensitivity. The synced folder inside the VM apparently takes on the properties of the host's file system, so if I'm developing from a Windows machine, or even OSX, the file system isn't case sensitive. This is a big issue, as our production servers will be pure CentOS, and its file system will be case sensitive. Case sensitivity is one of the main reasons we wanted to have a local VM. We want to prevent "It works on my machine!" Some workarounds we've considered or tried: Use lsyncd to sync from the vagrant share to a location within the VM that is case sensitive updating files on the host doesn't seem to generate the events in the VM that lsync listens to Make a case-sensitive partition on the host (Doesn't work for Windows) Use samba this may be an option, but we haven't vetted it yet. Is there a better way? Note that we have developers using Windows, OS X, and Ubuntu, and the solution needs to work everywhere.

    Read the article

  • Windows Server 2008 R2 Print Server - Change Printer Names on All Client Systems

    - by Jeramy
    I have a Windows Server 2008 R2 print server set up hosting out multiple printers to my end users. I would like to change the naming convention for all of the printers hosted on the print server and want this change reflected on the client end. For example: I have a HP4000 printer named "Cottage" on the print server. I want to rename the printer "HR-1stFloor-220a" on the print server and I want this printer to appear on every client system with the new name. Simply renaming the printer on the server automatically creates a link from the old printer name to the new one, so all the clients work but the actual name, from their perspective, has not changed. Renaming the share name also does not visibly effect the end user (though it does update the port information). I would like to have the names of the printers be meaningful information regarding department and location, but this means that when they change hands or move I would need to update this information, and currently I am not seeing a way short of writing custom start-up scripts and remove/replacing them through AD. Is there a simple way of accomplishing this task? Thank you for your help.

    Read the article

  • To install Markdown's extensions by Python

    - by Masi
    The installation notes (git://gitorious.org/python-markdown/mainline.git) say in the file using_as_module.txt One of the parameters that you can pass is a list of Extensions. Extensions must be available as python modules either within the markdown.extensions package or on your PYTHONPATH with names starting with mdx_, followed by the name of the extension. Thus, extensions=['footnotes'] will first look for the module markdown.extensions.footnotes, then a module named mdx_footnotes. See the documentation specific to the extension you are using for help in specifying configuration settings for that extension. I put the folder "extensions" to ~/bin/python/ such that my PYTHONPATH is the following export PYTHONPATH=/Users/masi/bin/python/:/opt/local/Library/Frameworks/Python.framework/Versions/2.6/ The instructions say that I need to import the addons such that import markdown import <module-name> However, I cannot see any module in my Python. This suggests me that the extensions are not available as "python modules - - on [my] PYTHONPATH with names starting with mdx_ - -." How can you get Markdown's extensions to work? 2nd attempt I run at ~/bin/markdown git clone git://gitorious.org/python-markdown/mainline.git python-markdown cd python-markdown python setup.py install I put the folder /Users/masi/bin/markdown/python-markdown/build to my PATH because the installation message suggests me that is the new location of the extensions. I have the following in a test markdown -document [TOC] -- headings here with # -format --- However, I do not get the table of contents. This suggests me that we need to somehow activate the extensions when we compile by the markdown.py -script. **The problem returns to my first quoted text which I is rather confusing to me.

    Read the article

  • New user profile creation error - Windows cannot open *.exe

    - by Jake
    I have a windows 7 laptop with the user "mydomain\boy" that cannot log in to the laptop. the error message is something like "User profile service cannot log in the user boy". I then logged in with the domain admin account "mydomain\admin" and then went to delete the "mydomain\boy" from my computer system properties advance system settings user profiles settings. I also ensure that the user is deleted from control panel user accounts. I then also deleted the user folder c:\users\boy I also checked that the registry at this location HKLM\software\microsoft\windows nt\currentversion\profilelist\ and ensure that there is no entry for boy. I followed http://support.microsoft.com/kb/947215 using the method 3 "fix it for me" but does not seem to do anything. (or i don't know how to use it). AFTER EVERYTHING DONE ABOVE... Everytime i log in with a new user, be it boy, girl or anything other domain account (other than the admin account already created when I first logged in to begin the fix/break), it takes a long time, and when the "preparing desktop" goes away, it starts to exe cannot open error e.g. regsvr.exe etc.. file association problem with exe QUESTION (phew finally..): Please tell me how to fix it? Thanks!

    Read the article

  • Use Windows/Mac MySQL GUI over SSH Tunnel

    - by Marcin
    I am working on a client's website and he has hosting through 1and1. They don't allow connecting directly to their mySQL server from anywhere. I can't for instance load up a mySQL GUI on windows and just connect and work on the databases, it says host not found. His hosting account on the other hand is given access to the mySQL server even though it is in a different location. Let's say these are the servers I'm working with: His main hosting: Address: thehost.com Username: joe His mySQL server: Address: mysqlserver.com Port: 3306 Database: thedata User: dbouser The main hosting account he has comes with SSH. So if I SSH into thehost.com on port 22 and then use the mysql command to connect to mysqlserver.com, it works. I have tried to set up SSH tunneling but the problem is that it's not the mySQL server that has SSH allowed, it's the main hosting. How do I set up SSH Tunneling on both a Mac and a Windows machine so that I can run any GUI I want and I will be able to connect to the mysqlserver.com server. All based on the information above that SSH access is to thehost.com only, and thehost.com itself can connect to mysqlserver.com.

    Read the article

  • How to securely enable file sharing over PPTP on Windows 2008 Server

    - by Damage
    I have set up a Windows SBS 2003 domain (LAN) and a stand-alone Windows 2008 Server (web server) at another location (workgroup). I established PPTP VPN connection (SBS dials web server) over which users from LAN should be able to access web server. On web server I enabled TCP/IPv4 and File and Printer sharing protocol. It has a few external addresses (one of them is default) AND one local address (192.x.x.x) assigned to network adapter. Firewall allows port 445 for file sharing. There's the problem - I can not enable web server file shares to be visible to LAN users and ONLY to LAN users: From SBS I can access webserver but I cannot access webserver from LAN workstations (XP, Vista). I have had same configuration - I have just replaced old (web server) Windows 2003 server with 2008 so SBS settings are the same (static route, DNS etc.). How can I enable file sharing on web server for LAN workstations? Now I have opened File and printer sharing to the internet which is of course totaly unsecure. I tried to secure the tunnel so I moved RAS (VPN) connection (Network Center) on web server to "Private" profile and moved firewall port 445 to "Private" profile but suddenly file sharing does not work and I cannot telnet webserver on port 445. How can I secure file sharing so I do not have to open it to the internet?

    Read the article

  • Reverse SSH Tunnel

    - by chris
    I am trying to forward web traffic from a remote server to my local machine in order to test out some API integration (tropo, paypal, etc). Basically, I'm trying to setup something similar to what tunnlr.com provides. I've initiated the ssh tunnel with the command $ssh –nNT –R :7777:localhost:5000 user@server Then I can see that server has is now listening on port 7777 with user@server:$netstat -ant | grep 7777 tcp 0 0 127.0.0.1:7777 0.0.0.0:* LISTEN tcp6 0 0 ::1:7777 :::* LISTEN $user@server:curl localhost:7777 Hello from local machine So that works fine. The curl request is actually served from the local machine. Now, how do I enable server.com:8888 to be routed through that tunnel? I've tried using nginx like so: upstream tunnel { server 0.0.0.0:7777; } server { listen 8888; server_name server.com; location / { access_log /var/log/nginx/tunnel-access.log; error_log /var/log/nginx/tunnel-error.log; proxy_pass http://tunnel; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_redirect off; } } From the nginx error log I see: [error] 11389#0: *1 connect() failed (111: Connection refused) I've been looking at trying to use iptables, but haven't made any progress. iptables seems like a more elegant solution than running nginx just for tunneling. Any help is greatly appreciated. Thanks!

    Read the article

  • Cannot delete old NFS directory: Device or resource busy

    - by Jakobud
    On server1, we had an NFS share mounted from server 2 like this: /nfs/server2/share Recently, we took down server2 to install a new OS on it. Now we can't get NFS setup the way it was. When I do this: ls -l /nfs I get this: drwxr-xr-x 2 root root 0 2010-03-15 09:59 server2 Notice how the directory size is 0 instead of 4096 like usual? Anyways I go into server2 expecting to see a share directory, but I don't. It's empty. So therefore I cannot mount my share at /nfs/server2/share. When I try to create /nfs/server2/share directory, I get mkdir: cannot create directory `share': No such file or directory I think this is because it doesn't really think the /nfs/server2 directory really exists. Even if I use the -p option with mkdir, it doesn't work. Next I tried to remove /nfs/server2 so I could just recreate it. I try to rm -r /nfs/server2 but I get rm: cannot remove directory `/nfs/server2': Device or resource busy So now I'm at a loss. I need to mount this NFS share in the same exact place on server1 (at /nfs/server2/share) because other software on server1 depend on this. But if I can't create that share directory and I can't remove that directory, what do I do? Also, just for testing, I attempted to mount the share at /nfs/testing/share and it mounted just fine. But like I said, I need to mount it back in the same location.

    Read the article

  • PHP on Server 2003: Enabling PHP_APC.DLL creates Error

    - by james.527.
    When trying to enable PHP_APC.DLL, PHP crashes returning invalid access to memory location. Any ideas? I am running 5.2.12 in ISAPI mode. Here is what I have enabled extension wise: ;extension=php_bz2.dll ;extension=php_curl.dll ;extension=php_dba.dll ;extension=php_dbase.dll ;extension=php_exif.dll ;extension=php_fdf.dll extension=php_gd2.dll ;extension=php_gettext.dll ;extension=php_gmp.dll ;extension=php_ifx.dll ;extension=php_imap.dll ;extension=php_interbase.dll extension=php_ldap.dll ;extension=php_mbstring.dll extension=php_mcrypt.dll ;extension=php_mhash.dll ;extension=php_mime_magic.dll ;extension=php_ming.dll ;extension=php_msql.dll ;extension=php_mssql.dll extension=php_mysql.dll extension=php_mysqli.dll ;extension=php_oci8.dll ;extension=php_openssl.dll extension=php_pdo.dll ;extension=php_pdo_firebird.dll ;extension=php_pdo_mssql.dll extension=php_pdo_mysql.dll ;extension=php_pdo_oci.dll ;extension=php_pdo_oci8.dll ;extension=php_pdo_odbc.dll ;extension=php_pdo_pgsql.dll extension=php_pdo_sqlite.dll ;extension=php_pgsql.dll ;extension=php_pspell.dll ;extension=php_shmop.dll ;extension=php_snmp.dll ;extension=php_soap.dll ;extension=php_sockets.dll extension=php_sqlite.dll ;extension=php_sybase_ct.dll ;extension=php_tidy.dll ;extension=php_xmlrpc.dll ;extension=php_xsl.dll extension=php_zip.dll extension=php_win32service.dll ultimately i'm trying to create a PHP based uploader with a progress bar. From what I understand PHP_APC is the only way to do this. If anyone could help me stabilize PHP_APC or know of another UL with progress bar method, it would be appreciated.

    Read the article

  • Sun Solaris - Find out number of processors and cores

    - by Adrian
    Our SPARC server is running Sun Solaris 10; I would like to find out the actual number of processors and the number of cores for each processor. The output of psrinfo and prtdiag is ambiguous: $psrinfo -v Status of virtual processor 0 as of: dd/mm/yyyy hh:mm:ss on-line since dd/mm/yyyy hh:mm:ss. The sparcv9 processor operates at 1592 MHz, and has a sparcv9 floating point processor. Status of virtual processor 1 as of: dd/mm/yyyy hh:mm:ss on-line since dd/mm/yyyy hh:mm:ss. The sparcv9 processor operates at 1592 MHz, and has a sparcv9 floating point processor. Status of virtual processor 2 as of: dd/mm/yyyy hh:mm:ss on-line since dd/mm/yyyy hh:mm:ss. The sparcv9 processor operates at 1592 MHz, and has a sparcv9 floating point processor. Status of virtual processor 3 as of: dd/mm/yyyy hh:mm:ss on-line since dd/mm/yyyy hh:mm:ss. The sparcv9 processor operates at 1592 MHz, and has a sparcv9 floating point processor. _ $prtdiag -v System Configuration: Sun Microsystems sun4u Sun Fire V445 System clock frequency: 199 MHZ Memory size: 32GB ==================================== CPUs ==================================== E$ CPU CPU CPU Freq Size Implementation Mask Status Location --- -------- ---------- --------------------- ----- ------ -------- 0 1592 MHz 1MB SUNW,UltraSPARC-IIIi 3.4 on-line MB/C0/P0 1 1592 MHz 1MB SUNW,UltraSPARC-IIIi 3.4 on-line MB/C1/P0 2 1592 MHz 1MB SUNW,UltraSPARC-IIIi 3.4 on-line MB/C2/P0 3 1592 MHz 1MB SUNW,UltraSPARC-IIIi 3.4 on-line MB/C3/P0 _ $more /etc/release Solaris 10 8/07 s10s_u4wos_12b SPARC Copyright 2007 Sun Microsystems, Inc. All Rights Reserved. Use is subject to license terms. Assembled 16 August 2007 Patch Cluster - EIS 29/01/08(v3.1.5) What other methods can I use? EDITED: It looks like we have a 4 processor system with one core each: $psrinfo -p 4 _ $psrinfo -pv The physical processor has 1 virtual processor (0) UltraSPARC-IIIi (portid 0 impl 0x16 ver 0x34 clock 1592 MHz) The physical processor has 1 virtual processor (1) UltraSPARC-IIIi (portid 1 impl 0x16 ver 0x34 clock 1592 MHz) The physical processor has 1 virtual processor (2) UltraSPARC-IIIi (portid 2 impl 0x16 ver 0x34 clock 1592 MHz) The physical processor has 1 virtual processor (3) UltraSPARC-IIIi (portid 3 impl 0x16 ver 0x34 clock 1592 MHz)

    Read the article

  • Issue configuring Oracle database for SSL

    - by Santhosha Kaldambe
    Hello, I want to setup Oracle for SSL communication. I am not using SSL authentication for database user. As first requirement, generated self signed certificate using OpenSSL and added certificate to wallet. The wallet location is specified in server configuration. Created listener and it is starting however it does not provide any service. The default listener (non SSL) is working fine. When I execute LSNRCTL.EXE status SSLLISTENER it gives below output. STATUS of the LISTENER Alias SSLLISTENER Version TNSLSNR for 32-bit Windows: Version 11.1.0.6.0 - Production Start Date 14-NOV-2009 01:47:08 Uptime 16 days 22 hr. 14 min. 3 sec Trace Level off Security ON: Local OS Authentication SNMP OFF Listener Parameter File C:\app\Administrator\product\11.1.0\db_1\network\admin\listener.ora Listener Log File c:\app\administrator\diag\tnslsnr\\ssllistener\alert\log.xml Listening Endpoints Summary... (DESCRIPTION=(ADDRESS=(PROTOCOL=tcps)(HOST=)(PORT =2484))) The listener supports no services The command completed successfully Here is exact content of various files after configuration. 1) File Name: tnsnames.ora ORCL = (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = )(PORT 1521)) ) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = orcl) ) ) 2) File Name: sqlnet.ora SSL_VERSION = 0 NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT) sqlnet.authentication_services= (NONE) tcp.validnode_checking = no tcp.invited_nodes=(PS0803.oraebs.com,PS2948,PS5098) SSL_CLIENT_AUTHENTICATION = FALSE WALLET_LOCATION = (SOURCE = (METHOD = FILE) (METHOD_DATA = (DIRECTORY = C:\app\Administrator\admin\orcl\Server_Wallet) ) ) 3) File Name: listener.ora SSL_CLIENT_AUTHENTICATION = FALSE WALLET_LOCATION = (SOURCE = (METHOD = FILE) (METHOD_DATA = (DIRECTORY = C:\app\Administrator\admin\orcl\Server_Wallet) ) ) LISTENER = (DESCRIPTION_LIST = (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521)) ) (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = )(PORT 1521)) ) ) SSLLISTENER = (DESCRIPTION = (ADDRESS = (PROTOCOL = TCPS)(HOST = )(PORT = 2484)) ) Thanks Santhosh

    Read the article

  • Cygwin - Repo with Separate Git/Working Dir Doesn't Work

    - by Kyle Lacy
    Since I've switched to OS X and Vim, I've found it easiest to manage all of my 'dotfiles' (all of my configuration files and miscellaneous scripts) with Git. Having already set up my dotfiles in a repo following this tutorial, I figured it would also be easy enough to migrate all of my settings into my Cygwin setup on my Windows partition. Already having the repo setup on Github, I simply clone'd the repo, and moved all of the files over to my home directory, making it a mirror of my OS X home directory. Unfortunately, I cannot seem to use the actual repo any further within Cygwin. The problem is that I cannot use my dotfiles repo with git within Cygwin. The setup is unique from most normal git repos, in that the working directory and the git directory are in different locations. Specifically, the working directory is $HOME (/Users/kyle on OS X, /home/kyle in Cygwin), and the git repo is $HOME/.dotfiles.git. So, if I wanted to get the status of the repo, for example, I would type the following command (which I alias to reduce typing, of course): git --work-tree=$HOME --git-dir=$HOME/.dotfiles.git status -uno While this works fine on OS X, this refuses to work within Cygwin. Regardless of whether or not I use my alias, or whether or not I substitute $HOME by hand, I get the following git error: fatal: Not a git repository: /home/Kyle/dotfiles/.git/modules/.build/git I don't understand where this error comes from, but the path /home/Kyle/dotfiles was the original location of the git repo when I initially cloned it. Additionally, it's important to note that the repo relies heavily on submodules. If specifics are necessary, the repo in question can be found on GitHub. The commands I ran to setup the repo in Cygwin can also be found within the Readme file.

    Read the article

  • SSL on nginx + unicorn got "Error 102 (net::ERR_CONNECTION_REFUSED)"

    - by panggi
    I tried to deploy my app on EC2 (opened port: 22, 80, 443) App: Rails 3.2.2 Server: nginx 1.2.1 unicorn gem (latest) ubuntu 12.04 Deployer: Capistrano I tried to follow the instruction in Railscasts : http://railscasts.com/episodes/335-deploying-to-a-vps (Sorry, it's a Pro Episode) Anything fine with normal port 80 http but i got Error 102 after trying to use SSL, here is the nginx.conf content: upstream unicorn { server unix:/tmp/unicorn.frontend.sock fail_timeout=0; } server { server_name beta.sukeru.com; listen 443 default; root /home/deployer/apps/appname/current/public; ssl on; ssl_certificate server.crt; ssl_certificate_key server.key; ssl_session_timeout 5m; ssl_protocols SSLv2 SSLv3 TLSv1; ssl_ciphers HIGH:!aNULL:!MD5; ssl_prefer_server_ciphers on; location / { proxy_set_header Host $host; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header X-Forwarded-Proto https; proxy_redirect off; proxy_pass http://unicorn; } error_page 500 502 503 504 /500.html; } In production.rb i set: config.force_ssl = true Can anyone give a solution for this? :)

    Read the article

  • Error installing dotnet framework 3.5 SP1 on windows 2008

    - by Shiraz Bhaiji
    Getting a really wierd error. One of the developers tried to install Windows 2008 as a Virtual PC. He has also run windows update. When he tries to install dotnet framework 3.5 SP1 he gets the following error: [09/25/09,12:48:26] Microsoft .NET Framework 2.0SP1 (CBS): [2] Error: Installation failed for component Microsoft .NET Framework 2.0SP1 (CBS). MSI returned error code 1 [09/25/09,12:48:34] WapUI: [2] DepCheck indicates Microsoft .NET Framework 2.0SP1 (CBS) is not installed. I though that dotnet framework was installed automatically with windows update on windows 2008. So how could it be missing? Thanks. Shiraz EDIT We also have the same problem on a VPC that had dotnet framework 3.5 installed and working OK. I have tried removing all versions of dotnet framework, using the following clean up tool: http://blogs.msdn.com/astebner/pages/8904493.aspx I then downloaded and tried to install dotnet framework 2.0 SP1, from this location: http://www.microsoft.com/Downloads/details.aspx?familyid=79BC3B77-E02C-4AD3-AACF-A7633F706BA5&displaylang=en The error I now get is: "This product is not supported on the Vista Operating System" EDIT Thanks for the help, have given an up vote to everyone. In the end our problem was that we had installed Windows Server 2008 from an older ISO image, on this everything worked fine untill we tried to install framework 3.5 SP1. We reinstalled Windows from a new image, and it worked OK.

    Read the article

  • Migrating a virtual domain controller for DR exercise

    - by Dips
    Hello gurus, I have a question. I have a requirement where I have a virtual domain controller and I have to migrate it to another virtual server in a different location. It is for test purposes to test out a DR scenario and the test will be deemed successful if the users that authenticate using the production DC can do so in the backup DC. I don't know much about this and thus don't know why it was assigned to me. So any assistance will be greatly appreciated. What I had in mind was: 1) Taking a snapshot of the production server and then restoring it in the other server. But I was told that this is not the suggested way of doing it. I was not told why. Is that right?If a snapshot is to be taken then what is the best way to do it. Any ideas on where I can get the documentation for this? 2) Another way would be to build the test DC from ground up, match it to the specs of production DC and then perform the DR test. Is this a better option? What will be needed to perform such an activity? Where can I find documentation on that? I apologise for the length of this query. As I said I am quite a novice and hope to get a better resolution. Any assistance will be greatly appreciated. Regards,

    Read the article

  • Exchange 2007 restore - Backup Exec Unable to Attach to a resource

    - by Andy
    I have been struggling with this one for months! Grateful for any advice. The setup is a windows 2003 server network, 4xservers on the domain. Two exchange 2007 servers (only one with mailboxes still on). Backup Exec (12.5) on a non-exchange server with agents on the others. Backup exec runs a full backup of exchange across the network well, at pretty reasonable speeds. However, when you try any kind of restore (individual emails, mailboxes or whole system restore - all to same location or to alternate server, RSG etc) the following message is received within about 10-15 secs of starting the job: Job ended: 24 December 2010 at 13:28:32 Completed status: Failed Final error: 0xe000848c - Unable to attach to a resource. Make sure that all selected resources exist and are online, and then try again. If the server or resource no longer exists, remove it from the selection list. Edit the selection list properties, click the View Selection Details tab, and then remove the resource. Final error category: Resource Errors For additional information regarding this error refer to link V-79-57344-33932 Things I have already tried: Changed account to main administrator account (with all permissions) checked versions of ese.dll on both servers - both the same Checked all VSS writers on both servers are stable / normal restoring to different locations Any advice anyone could give would be much appreciated. Many thanks, Andy

    Read the article

  • How do I provide dpkg configuration parameters to aptitude or apt-get?

    - by troutwine
    When installing gitolite I find that: # aptitude install gitolite The following NEW packages will be installed: gitolite 0 packages upgraded, 1 newly installed, 0 to remove and 29 not upgraded. Need to get 114 kB of archives. After unpacking 348 kB will be used. Get:1 http://security.debian.org/ squeeze/updates/main gitolite all 1.5.4-2+squeeze1 [114 kB] Fetched 114 kB in 0s (202 kB/s) Preconfiguring packages ... Selecting previously deselected package gitolite. (Reading database ... 30593 files and directories currently installed.) Unpacking gitolite (from .../gitolite_1.5.4-2+squeeze1_all.deb) ... Setting up gitolite (1.5.4-2+squeeze1) ... No adminkey given - not initializing gitolite in /var/lib/gitolite. The last line is of interest to me. If I run dpkg-reconfigure -plow gitolite I am presented with a dialog and can modify: the system user name for gitolite, the location of the gitolite repositories and provide the admin pubkey. I'd prefer to use the git system user and provide the admin pubkey on installation, say something of the sort: # aptitude install gitolite --user git --admin-pubkey 'ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAACAQDAc7kCAi2WkvqpAL1fK1sIw6xjpatJ+Ms2nrwLJPhdovEY3MPZF7mtH+rv1CHFDn66fLGiWevOFp...' That, of course, doesn't work. Can something similar be done? How do I determine the configuration parameters ahead of time? This would be remarkably useful, for instance, when installing gitolite automatically, via puppet or chef.

    Read the article

  • Zimbra MTA settings

    - by user192702
    Hi have some questions for Zimbra v8.0.6GA. Under Configure - MTA - Network, I'm seeing a few settings and am not very clear what to do with them. Web mail MTA Host name Is this for delivering local mail only (ie not for external mails)? According to this link, it says the following. That's a mouthful but what is "composed messages"? Is this for a multi server deployment where the Postfix server for Zimbra isn't installed on the same box that as the rest of the servers? Webmail MTA is used by the Zimbra server for composed messages and must be the location of the Postfix server in the Zimbra MTA. Relay MTA for external delivery My understanding after reading the doc is that if my ISP doesn't force me to relay outgoing mails through them, and I have enabled DNS lookup, I can leave this blank? Inbound SMTP host name Sorry I know this is explained as "If your MX records point to a spam-relay or any other external non-Zimbra server, enter the name of that server in the Inbound SMTP host name field." but I'm not following. Can someone provide an example? MTA Trusted Networks The admin doc says "To set up MTA trusted networks on a per server basis, make sure that MTA trusted networks have been set up as global settings and then go the Configure Servers MTA page and in the MTA Trusted Networks field enter the trusted network addresses for the server." However I see out of the box it has default networks setup for the server whereas on a global level it's blank. Does this mean there is a bug with the install software and I have to copy the setting from the server to the global setting?

    Read the article

  • Occasional "Could not load file or assembly" in asmx WebService on IIS and DFS

    - by user8804
    We have a handfull of ASMX web service hosted on two identical Windows Server 2003 boxes. The virtual directory for the web services is loaded in a DFS share, both servers point to the same share. We have a load balancer between the internet and the two web servers. At a seemingly random interval (right now about twice per week) when a user tries to access a method on the web service, IIS returns the error: "Could not load file or assembly" for one of the assemblies used in the method call, and will continue reporting it each time the method is called until the app pool is recycled. We haven't found any distinguishable pattern to the problem. This is what I know: the missing assembly varies (but it's always a home-brew assembly) the Web Service method that fails varies there is no noticeable pattern to the times or intervals where the problem appears there are no admin users accessing the servers when the problem appears the failing method will work correctly on one server and fail on the other, even though both point to the same bin folder the problem can always be corrected by recycling the app pool and making no other changes I have enabled the Assembly Binder Log, and know that the binder is looking in the correct location for the file. Our assemblies are compiled for .Net 3.5.

    Read the article

  • How to replicate Lynda.com transitions in my own presentations (Keynote preferred, Powerpoint possib

    - by jdmuys
    I recently noticed that lynda.com uses in their training videos a very interesting transition that I would like to replicate in my own presentations. They are somewhat similar to the computer screen animations in the "Minority Report" movie: they zoom out to a huge sheet, pan, and zoom back in to a new location. It's very good for navigating deep hierarchies. For example when you are at level 1, you can see level 3, but it's tiny and unreadable. You then transition by zooming in to a deeper level that suddenly becomes legible. I can imagine also to use it using a large "mind map" as a common Ariane thread, to dive into details (and back out) while still taking advantage of the visual memory of the audience. It a bit difficult to describe, I hope I managed to convey the idea. You can see them in action for example there (iPhone programming training): http://www.lynda.com/home/DisplayCourse.aspx?lpk2=48369 Then click on "What you should know" in the introduction chapter. See for example in that movie between 22s and 24s, then between 27s and 28s. How do they do that? How could I replicate that effect? TIA

    Read the article

< Previous Page | 316 317 318 319 320 321 322 323 324 325 326 327  | Next Page >