Search Results

Search found 37931 results on 1518 pages for 'computer case'.

Page 322/1518 | < Previous Page | 318 319 320 321 322 323 324 325 326 327 328 329  | Next Page >

• Does the size of the monitor Matter?

  - by Arsheep

  I have a old computer, and I want to buy a big LCD. The best I've found so far is Viewsonic's 24" LCD TFT monitor. So will it run without any problems, or do I need to upgrade the video cards or something as well? The computer is not too old: it has P4 board and celeron processor, with 128 graphics memory. And in display properties, it says that the maxium that I can use is 1280 x 1024 resolution. I am noob hardware-wise, so need help on this stuff. Thanks

  Read the article

• Wi-Fi or Bluetooth to USB converter

  - by yerzhik

  Is there a device, that works without a driver, you just connect it as usb, and receive any signal sent to it as if it were COM Port wired connection? For example, such a device that gets data sent to it by Wi-Fi network or Bluetooth and resends it to the USB. Of course it has to be set up once (network name, password etc) and for this purpose you need a driver, but once it is set up, you can use it at any computer without a driver. I have a Bluetooth USB, but I think it can't work without a driver. By just connecting it to any computer you can't find it in device list on another bluetooth device (as phone, etc).

  Read the article

• RCA monitor won't display highest resolution when NVidia drivers are installed

  - by novellterminator

  My computer is a dual-monitor setup. It won't display my second monitor's highest res... In fact, it will only display one resolution. Anything higher or lower makes the monitor not show the screen. I've had this problem with this computer, and I upgraded almost all my components (cpu, RAM, mobo, and video card included) and I still have this problem with my new setup. This leads me to believe it's a problem with my monitor and the NVidia driver together. Any thoughts on what can be done? The manufacturer of the monitor doesn't make a driver for this monitor. I used to run Windows Vista and now my new setup runs Windows 7.

  Read the article

• Java Applets fail to launch in Windows 7 64bit

  - by Steve

  Hi can you help? I'm having great trouble launching Java applets using Windows 7 64 bit. I have the 32 bit version of Java installed (as recommended, for use with 32 bit browsers). When I click on an Java applet to open it the Java logo shows with a circular progress bar, but the process goes no further, just the progress bar going round and round. There are no error messages. The computer is a few months old and Java has never worked properly. I've tried with both IE9 and Chrome, followed the suggested fixes, uninstall then reinstall, check certain browser settings (all were in order), check Java control panel settings (again all was in order) delete the internet cache etc, tried 32bit & 64bit Java side by side. All to no avail. I'm baffled Is there anything else to try, or do I have to accept a computer without Java (Very inconvenient!) Thanks

  Read the article

• Step by Step: Remove/Sideline Preinstalled Windows 8, Install Ubuntu

  - by user207562

  I want Ubuntu as my primary/only operating system. Computer came with presumptive Pre-Installed Windows 8.(touch screen) Help. New Dell Inspiron 15r. Cannot install Ubuntu 12.04-03 or LTS. I need/request step by step instructions to remove Windows 8 or sideline Windows 8. (ie) BIOS settings I need to know: What to have; What settings; When to apply; Boot manager settings. UEFI. Etc. This should be easy, but I am mired in the Herpes that is Microsoft. I end up having a presumed dual boot that will not access Ubuntu. (ie) Step 1: Turn on computer. Step 2: F# to change ... to ... at Dell prompt... I want to use Ubuntu as my primary operating system or my only operating system.

  Read the article

• Is there a Google Authenticator desktop client?

  - by cwd

  I am using Google Authenticator for 2-step authentication. I like how I can use a code and verify my account using my phone: I realize that the app was designed to run on a device other than a computer to increase security for the computer (in case that it is lost or stolen), but I would like to know if there is a way I can run Google Authenticator on my Macbook. Now, per the Google Authenticator Page it will not run on a desktop: What devices does Google Authenticator work on? Android version 2.1 or later BlackBerry OS 4.5 - 6.0 iPhone iOS 3.1.3 or later However there are several emulators for developers and so I wonder if it is possible to run one of these emulators and then run Google Authenticator with that. I do realize this is not a best practice - but I'm less worried about my laptop getting stolen and more worried about someone just hacking the account. So my question is this: Is it possible to run it on the desktop, even though it is not meant to be / not recommended?

  Read the article

• Mount remote drive by port forwarding

  - by Anushka

  I have a windows 7 computer at home and a remote windows XP machine with an external USB drive attached to it. I would like to be able to copy files to and from home/the remote USB drive. The problem is that the only way of contacting the work computer is by first sshing into a different remote linux machine as there is a firewall that prevents direct internet connection. I can see two possible solutions but I don't know how to do them. Set up winscp using ssh port forwarding via the linux box so that I can copy to and from the two windows machines. I assume that I would need to run an ssh server on the XP machine as well to do this? Mounting the remote USB drive on the remote windows machine from the home XP machine via ssh port forwarding again via the linux box. Does anyone know how to do either solution?

  Read the article

• Get Func-y

  - by PhubarBaz

  I was working on a Windows form app and needed a way to call out to a service without blocking the UI. There are a lot of ways to do this but I came up with one that I thought was pretty simple. It utilizes the System.Func<> generic class, which is basically a way to create delegates using generics. It's a lot more compact and simpler than creating delegates for each method you want to call asynchronously. I wanted to get it down to one line of code, but it was a lot simpler to use three lines.In this case I have a MyServiceCall method that takes an integer parameter and returns a ServiceCallResult object.public ServiceCallResult MyServiceCall(int param1)...You start by getting a Func<> object for the method you want to call, in this case MyServiceCall. Then you call BeginInvoke() on the Func passing in the parameter. The two nulls are parameters BeginInvoke expects but can be ignored here. BeginInvoke returns an IAsyncResult object that acts like a handle to the method call. Finally to get the value you call EndInvoke on the Func passing in the IAsyncResult object you got back from BeginInvoke.Func<int, ServiceCallResult> f = MyServiceCall;IAsyncResult async = f.BeginInvoke(23, null, null);ServiceCallResult result = f.EndInvoke(async);Doing it this way fires off a new thread that calls the MyServiceCall() method. This leaves the main application thread free to update the UI while the method call is running so it doesn't become unresponsive.

  Read the article

• Hitching and Slowness Due to HDD Activity on Ubuntu, But Not Windows?

  - by Espionage724

  It's been bothering me for months now, but I've noticed in Ubuntu (or any distro of Linux I've tried), any major I/O activity will cause hitching and general slowness. For example, if I try doing a file transfer from my network computer to the computer I'm using and try moving the mouse after a while, it might not respond for a second or so. Similar incidents occur in other cases too (right-clicking to get a context menu takes a few seconds, hitting the drop-down application bar takes a while, etc). My HDD isn't top-notch (a WD Blue 500GB 7200RPM drive) but I don't recall it being nearly this bad in Windows 7, 8, or 8.1. CPU activity during file transfers is relatively low (less than 10-20% on all cores of a Phenom II X4 @ 3.3Ghz). I'm using Gnome System Monitor (on Xubuntu) and can't seem to see what kind of HDD activity is occurring though. I have 8GB of RAM too, which is moderately being used (2.5GB), but shouldn't be a problem either. Any ideas what's up? I've tried kernels between 3.8 and 3.11 (i'm using saucy currently with 3.11).

  Read the article

• How to rotate attached monitor to notebook of Sony's Z-series?

  - by user67175

  Is it possible that Sony is selling a top of the line, hugely expensive computer that does not have the basic ability to rotate an attached monitor? Is it possible that the Z-series simply can't do this? The Windows control panel is missing the normal option for "rotation", as is the Nvidia control panel for "orientation" , no additional rotation software works. Sony sales says they do not know the answer to this. Sony technical supports says that the problem lies with Nvidia, Nvidia technical supports says the problem lies with Sony. Any advice for a fix for this short of returning the computer would be greatly appreciated. Also wondering if this problem is common to computers running Windows 7?

  Read the article

• Bing New Tab Page on Chrome

  - by One Terrorist

  For a long while, my computer had the default new tab page, which I liked. Recently, it has turned into a bing search bar tab. I hate bing. I checked all my settings, removed unused extensions, checked my Chrome files briefly, but I can't find how it keeps coming back! At first I thought it was easy to find; it was set as the new tab page, but it isn't now and it's still here! I installed a new extension after a few tries trying to remove it, called "X New Page Tab", and it worked for one night, then Bing overrode it. Any help please? I really don't want Bing as anything on my computer.

  Read the article

• Can Remote Desktop connect only 2 monitors when the client has 3 or 4 monitors connected?

  - by user12931

  I have three monitors (all 1920x1200) connected to my desktop and I would like to RDP into another computer (running Windows Server 2003) and use only two of my three monitors. The main monitor is used for notification from the LAN like email, build status, etc. I've tried modifying the .rdp file to have a higher resolution (i.e. 3840x1200 ) which sort of works but the bits per pixel goes down to 8 and you have to manually resize the window which means that you need to change it to around 3840x1150. If I supply /span to the commandline it gives me a bit more than 3840 spanned across the three monitors (is there perhaps a limitation of say 4096 for the maximum resolution?). WORKAROUND: Connect twice to the same computer. Here's an interesting post from Microsoft: http://blogs.msdn.com/b/rds/archive/2009/08/21/remote-desktop-connection-7-for-windows-7-windows-xp-windows-vista.aspx

  Read the article

• How do I force the system to look for new sound devices?

  - by John Zeringue

  I have a small flat screen TV (Toshiba) that I often connect via HDMI to my laptop (an HP Pavilion dv4) and use as a computer monitor. When I do this, I prefer to use the TV's speakers, particularly when I'm watching video, because the sound quality is much better. However, when I connect the HDMI cable after turning on my computer (rather than having it plugged in before booting up), Sound Settings does not list the TV as an output device, and I am forced to reboot. I was curious if there is an easier solution to this, perhaps a CLI command to check for new sound outputs. Does anyone know of something like this or have another solution? To clarify, I believe this is a software problem. The HDMI always works, and I can switch my desktop over to the TV at any time. The issue is that, if the HDMI wasn't connected during start up, the TV will not appear as an output option in the Sound Settings GUI. So, unless I'm mistaken, my question is not HDMI specific, but rather a general usage question about manipulating sound settings from the command line.

  Read the article

• Hibernate doesn't work in Windows 7 64bit

  - by hey

  Hibernate doesn't work in Windows 7 64bit. When I try to hibernate, it just turns off computer and when I turn on it, it doesn't resume and it just starts as 'fresh' again. I updated my drivers. What is the problem? Can you give me a hand? Thank you. Come on, please help me, I really need hibernate working, 100 of my reputation will go to you. Thanks. Edit, by the way, my model is: Inspiron N5010. After I hibernate and turn on my computer, it just show Shut down didn't shut down correctly.

  Read the article

• How to move partition with Users to a new SATA controller?

  - by Al Kepp

  Our current situation: X79 chipset. Windows 7 installed on SATA SSD running on Marvell controller. C:\Users contains just Public and computer-name folders, all the other users are created in E:\Users. That partition is on two HDD's running on an Intel RAID controller. (The motherboard has got two SATA/RAID onboard controllers.) The goal is: Without reinstallation, I want to move SSD to a standard SATA controller. Then I want to get rid of RAID1, and move one HDD to the same internal Intel SATA controller and the current E:\Users move to that new place. I want it to stay as E:\users, but I need to reinstall the HDD to let it work in SATA mode without RAID. So I face several problems. I am sure all are solvable with free software utilities, but I don't know how exactly to do it. I can see the particular problems: I have got all users at E:\Users. When I turn off that E:\ disk, I won't be able to login to Windows. I need at least one admin account to be placed back at C:\users. The current C: runs on standard 120 GB SSD, but it is connected to a Marvell SATA/RAID controller. I am affraid the Windows won't let me put it to Intel SATA controller due to hardware/licence check, and I won't be able to use standard W7 recovery disk either, because there probably isn't marvel SATA/RAID driver on it. I haven't tried anything yet, because I am affraid I can end up with computer not working at all. (I want to move it to a standard ICH10 Intel SATA controller to let us have no problems in future with it. I think it is not very safe when we use any nonstandard hardware to boot the computer.) I need to somehow backup current E:\ disk and restore it to a new E:. I hope this will be the easy part (as long as the admin account will reside on C:). The E: RAID array is very large, but it is almost empty (less than 100 GB of data.) So I can make the partition smaller so it can easily fit to a single SATA HDD.

  Read the article

• remove an open wifi of a service provider near my house

  - by wannik

  I'm using Win 7. There is an access point of a service provider wifi near my house. The wifi is not free and not WEB/WPA protected. Everyone can connect to it and it will show the company's login page. (if the username/password are put correctly, their customer can use the net.) I'm not the customer of the company and have my own access point in my house. But my computer always connect to the network of that company. I tried to remove the network but it keep coming back and connect to that access point instead of mine. What can I do to make my computer choose my access point first?

  Read the article

• windows 7 partition disappeared

  - by atoMerz

  I have a VPCF2 with windows 7 installed on it. I was working on my computer when on of my drives (D) disappeared. I can see it in Computer Management>Disk Management and it'd marked as Healthy(Primary Partition). When I right click on it the only options that are enabled are Delete Volume and Help. So I cannot assign a drive letter to it (not even in safe mode). I tried System Restore and it failed. I tried to boot the system using ubuntu tha was installed on my system but that fails too because it was installed on partition D. I'm hopeless. What can I do?

  Read the article

• Should sanity be a property of a programmer or a program?

  - by toplel32

  I design and implement languages, that can range from object notations to markup languages. In many cases I have considered restrictions in favor of sanity (common knowledge), like in the case of control characters in identifiers. There are two consequences to consider before doing this: It takes extra computation It narrows liberty I'm interested to learn how developers think of decisions like this. As you may know Microsoft C# is very open on the contrary. If you really want to prefix your integer as Long with 'l' instead of 'L' and so risk other developers of confusing '1' and 'l', no problem. If you want to name your variables in non-latin script so they will contrast with C#'s latin keywords, no problem. Or if you want to distribute a string over multiple lines and so break a series of indentation, no problem. It is cheap to ensure consistency with restrictions and this makes it tempting to implement. But in the case of disallowing non-latin characters (concerning the second example), it means a discredit to Unicode, because one would not take full advantage of its capacity.

  Read the article

• Connecting to a 2.5" laptop drive using USB

  - by user27449

  So I swapped my MBP hard drive with a SSD drive, and I want to connect to my old hard drive. I bought a nextstar 3 external 2.5" drive enclosure that has a USB 2.0 interface. I watched an online video of an older version of the enclosure, and in the video they had a ATA cable to connect to the drive. My enclosure didn't come with anything like that, and there doesn't seem to be a way to connect to my drive (my old drive is a seagate 500gb momentus 7200 RPM). My laptop is about 2 years old now (MBP 17"). The drive doesnt' have pins to connect, it has a wide plug type connector, and a USB connector also (I was able to directly plugin the USB cable to the drive, but didn't connect it to my computer, was just testing thigns out). Is it safe for me to directly connect the cable that came with the enclosure to the drive, and then connect the other end to my computer? Does this single cable provide power and data transfer?

  Read the article

• Hard disk failure. Can I recover my "move"d folders?

  - by Doug

  I am in the process of moving all my files from an old laptop to new one. I just moved 11gb of data from my old laptop to a hard drive (external) and then upon moving it out to the new hard drive, the hard drive is getting a CRC (Data Error (Cyclic Redundancy Check). Now I am looking for a solution to recover the files that I moved on my old laptop (not the external). I understand they they are just marked for potential overwriting to free up space. I was getting ready to test out GetDataBack, but it says to install it on a healthy windows and use the recover-needed drive as an external. However, I don't want to turn off my computer without first getting the okay since it is in a "moved" state. Please help! What can I do to recover the Moved files. I haven't touched the computer since it has been moved. What can I use to recover them?

  Read the article

• Is my graphics card in use or not?

  - by Lindhe94

  I have a Samsung Series 7 NP730U3E which is running Ubuntu Gnome 13.10. This computer have an Intel Core i5 3337U an AMD Radeon HD 8570M on the inside. Ubuntu 13.10 is said to have driver support for this graphics card, but I am not sure whether or not this is the case. When I check System Settings Details it says "Graphics: Intel® Ivybridge Mobile" and lspci | grep VGA returns VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09). But lshw -c video returns *-display description: Display controller product: Mars [Radeon HD 8730M] vendor: Advanced Micro Devices, Inc. [AMD/ATI] physical id: 0 bus info: pci@0000:01:00.0 version: 00 width: 64 bits clock: 33MHz capabilities: pm pciexpress msi bus_master cap_list rom configuration: driver=radeon latency=0 resources: irq:47 memory:e0000000-efffffff memory:f7e00000-f7e3ffff ioport:e000(size=256) memory:f7e40000-f7e5ffff *-display description: VGA compatible controller product: 3rd Gen Core processor Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:46 memory:f7800000-f7bfffff memory:d0000000-dfffffff ioport:f000(size=64) What is the case? Is my graphics card is use, or do my laptop have undiscovered powers yet to yield?

  Read the article

• RDP windows key jamming

  - by VBwhatnow

  There is a known bug in RDP; if you lock the screen while connected to a computer the computer you are connected to will have its windows key jammed. There are a few work arounds that involve hammering the windows key and re-locking the screen but this isn't a bug I want to put up with anymore. Microsoft has said they wont fix this bug because it's XP specific and they are only working on security bugs now because XP is at end of life. Is there any way I can fix this or am I just going to have to find an alternative remote desktop software.

  Read the article

• Windows XP occasionally hangs for 2-3 minutes as the splash screen fades in.

  - by marcusw

  This is a bit of a rare problem, I have not been able to debug or fix it or find anyone else with the issue. I hope someone here can help me out. Once in a while, I boot up Windows XP from the first partition of the first disk (using grub, the computer dual-boots ubuntu) and it hangs as the Windows XP splash image fades in, leaving the screen with a dim image of the splash screen. After 2-3 minutes, it continues to boot as normal, no error messages or strange behavior. I have noticed that this happens about 75% of the time when the last time the computer was shut down it was from Ubuntu, and maybe 5-10% of the time otherwise. I have looked at system logs as far as I was able, and did not find anything the miss. What is causing this and how can I fix it?

  Read the article

• Problems with connecting to wireless network on windows 7

  - by Naveen

  I have a Dell laptop with Windows 7 (Home premium) 64 bit edition installed on it. I use a Wi-Fi router to browse the net. My problem is, I lose the network connection every 10 minutes or so. The network icon on the system tray shows the refresh icon and the status as "identifying network". The network is fine and works fine with my phone. I saw on the net this may be caused if I have enabled IPv6, so I disabled it but still problem persists. When I look at the event log I see the following entries: "Your computer was not assigned an address from the network (by the DHCP Server) for the Network Card with network address 0xXXXXXXXX. The following error occurred: 0x79. Your computer will continue to try and obtain an address on its own from the network address (DHCP) server." I have also installed VirtualBox(32 bit edition) on the laptop. Does anybody any solution to this?

  Read the article

• How does one dismantle the ThinkPad Mini Dock Series 3 (model 4337)?

  - by Whaa

  I have a ThinkPad Mini Dock Series 3 with a spring that is too stiff, causing problems with the connectivity when a computer is docked. I tried to open it so that I can soften the spring, but hit a brick wall. I removed all the screws I could find at the the bottom and the back panel of the docking station, but the bottom part of the plastic case would still not part from the top of the plastic case. I even looked under some of the various stickers for more screws, but found nothing. Can anyone please help with pointers on dismantling this docking station?

  Read the article

< Previous Page | 318 319 320 321 322 323 324 325 326 327 328 329  | Next Page >