Search Results

Search found 16809 results on 673 pages for 'nothing 2 lose'.

Page 322/673 | < Previous Page | 318 319 320 321 322 323 324 325 326 327 328 329  | Next Page >

• slow disk writes between host and guest

  - by Jure1873

  I've got a ubuntu (server kernel) on a amd x4, 4gb ram, 2x seagate sata 1 tb disks for testing virtual machines and the write performance is very slow. The two disks are in a software raid1 array, one small boot ext3 partition, 10gb system partition and the rest is a xfs partition (about 980) gb for data (virtual machines). If I'm copying files from the virtual machine to the host with rsync or scp the copy frequently stalls or goes at about 1mb/s. What's wrong? I've tried disabling barriers on xfs, increased logbufs, allocsize, but it seems nothing helps. The strange thing is that await (for example during copying) for sda is usually under 100, while for sdb is around 400. Any ideas on what could be wrong / what could I do to improve this setup?

  Read the article

• Will this RAM work well in an iMac?

  - by sala_7

  I want to increase the RAM of my 2.4GHz Intel Core 2 Duo 24" iMac. I currently have 1GB of RAM DDR2 SDRAM 667 MHz. I really want to upgrade, but know nothing about RAM or hardware in general... These are the cards I found: http://www.crucial.com/eu/store/mpartspecs.aspx?mtbpoid=D4B6F603A5CA7304 Are these of quality or should I look at something else? Finally, I have 800MHz of Bus speed, couldn't I get faster RAM? Thanks for taking the time to read, and hoping you take the time to answer.

  Read the article

• Ubuntu 11.10 w/ Cinnamon - Icons are gone and pictures do not display

  - by B U N N Y

  I'm new on this site and new to using Ubuntu and all. I currently have Ubuntu 11.10 and Cinnamon along with it. I've recently downloaded only a few applications, like the Adobe shockwave as well as a few games. After the downloads, the icons for the windows (the close, minimize, and maximize) are nothing but streaks of colours, and now just plain black, picture previews in my picture folder is gone, some icons on the panels are missing, and icons in the control center are gone. I'm sure more are gone, but that's the ones that I see often. I'm not sure what caused this to happen?? Please get back to me soon! I'm worried about what has happened. ): This is my only laptop to get online. I have no other way besides the library but that takes too long.. EDIT: Okay, I had asked my sister for some help and she helped me restore my minimize, maximize, and close button but I still haven't figured out how to show the icons in the cinnamon dock (which I have set at the top of the window) and how to have my pictures show up again. All of my pictures are just blank and I can't even preview them. They still have their file names but that is it. I'm not sure what has happened. I haven't downloaded any new apps as of the new edit.

  Read the article

• Ubuntu 12.04 Fails to Boot after Reboot

  - by Joe

  I have installed Ubuntu 12.04 on several Dell c6220 servers. The install was successful and all hardware is recognized. The problem that I am running into is that when issuing the reboot command or when pressing ctrl-alt-del, the server shuts down, but never comes back up. Instead, the fan revs up to full speed and stays that way until I power the server down. Once the server has been powered down via the power button, Ubuntu will boot just fine -- until the next reboot. I have found that by rebooting the server via the DRAC web interface will reboot the server correctly. I have also found that this problem does not exist with CentOS -- I can press ctrl-alt-del all day long and it always comes back up. I've tried several kernel parameters such as: reboot=bios reboot=pci reboot=acpi reboot=cold acpi=off noapic Nothing seems to work. I have also tried upgrading to kernel 3.4, but no change there, either. Has anyone run into a similar problem or any pointers on troubleshooting? Thanks, Joe

  Read the article

• unable remove/reinstall libxss1:amd

  - by mono

  Whenever I try to install anything (software-center or apt-get) I get an error report stating that libxss1:amd is in a "very bad inconsistent state" (translated from german) and that I should reinstall it. That would not bother me much but I am never sure if the stuff I'm trying will be working in the end. It really resists from being repaired apt-get install, apt-get remove, apt-get -f install, and all the usual suspects - nothing works. It always comes to: dpkg: Fehler beim Bearbeiten von libxss1:amd64 (--configure): Paket ist in einem sehr schlechten inkonsistenten Zustand - Sie sollten es nochmal installieren, bevor Sie die Konfiguration versuchen. Fehler traten auf beim Bearbeiten von: libxss1:amd64 E: Sub-process /usr/bin/dpkg returned an error code (1) I posted the error as is, since my translation might not be exact. But I guess you can figure from my text. I found out that this file is the X screen saver. Maybe I should kill it before handling that file. If thats so, than please tell me how. Thanks for your help, thomas

  Read the article

• How can I get a user account back?

  - by Ilan

  With all my computers I make one partition for the root and another for /home. This is useful for disasters where I need to reformat the root for ubuntu, but leave my /home data untouched. With the upgrade to 13.10 I had troubles on my wife's computer so I reinstalled 13.10. My own /home files came up, as expected, as if nothing had happened. For my wife, it is a different story - and that is the part where I need help. If I go into Files, computer I can see the home directory. There I can see ilan (my files) and yona (my wife's files). I can open yona, documents and see all her work. This means that all is well and I just need to hook up to her files. So the problem is that I need to create a user called Yona or yona, but something which will get me to exactly the files of interest. I'm not sure if I created her account as standard or an administrator. Is there any way I could tell by looking at the files in /home? I created a new user called Yona as a standard user (hoping that this is the right guess). The account came up as disabled. I pressed on the disabled button so I could change the password. I put in her password but it was refused as too short. Too short, too short, but that is what was used and that is what I need. Can anyone help me before my wife comes home and shoots me? Thanks, Ilan

  Read the article

• How can I connect a blu-ray player to a VGA screen?

  - by zaplwo

  Basically, I have a blu-ray player that I wanted to be connected to a projector and a monitor screen at the same time, so I got a component splitter and a component to VGA cable. The splitter works fine but the component to VGA adapter doesn't show anything on the monitor screen; is like if nothing is connected to it. I already change monitors but 3 monitors do the same. Anyone have any idea why this is happening or how can I connect the monitor and the projector to the blu-ray?

  Read the article

• backup, sync and search files over internet and intranet

  - by Cawas

  There are many online backup options out there. Dropbox, Sugarsync, Mozy, Carbonite, Jungledisk and my favorite so far, Crashplan. Some of them allow searching, all of them sync with their online servers, none of those (or many many others I didn't listed here) have what I want. I'm _not_ looking for an online backup service in here. Sure, some people might say "use rsync", "linux" and/or "set up apache" and so on... But that's just too much for maintenance, if it's even viable of building up. It needs to be simple. So, anyone knows of a really good solution out there? Picture mostly Google Desktop Search (or quick search) awesome searching, mixed with Crashplan Desktop, which is able to do everything by itself, and something like Dropbox's file versioning, along with dropbox the ability to seamless sync over intranet and internet like crashplan, switching between them when needed. I bet there's nothing like this yet, but well, I'm not sure. It would be great!

  Read the article

• Why can't SVN checkout into a virtualbox shared folder?

  - by Alex Waters

  I am trying to checkout into the virtualbox shared folder with svn 1.7 in ubuntu 12.04 running as a guest on a windows 7 host. I had read that this error was a 1.6 problem, and updated - but am still receiving the error: svn: E000071: Can't move '/mnt/hostShare/code/www/.svn/tmp/svn-hsOG5X' to '/mnt/hostShare/code/www/trunk/statement.aspx?d=201108': Protocol error I found this blog post about the same error in a mac environment, but am finding that changing the folder/file permissions does nothing. vim .svn/entires just has the number 12 - does this need to be changed? Thank you for any assistance! (just another reason for why I prefer git...)

  Read the article

• C# Threading Background Process - Programming - How to?

  - by Magic

  Hello...I have been given the horrible task of doing this. Launch the website Take a screenshot Fill in the form details, click on Next Take a screenshot ... ... ... Rinse. Repeat. Now, with various combinations, this comes up to 300 screenshots. And I have to do this for 4 different browsers. Chrome, Firefox, IE 6 and IE 7. I cannot use tools which will capture the screenshot and store them, such as, SnagIT. I need to take a screenshot, copy it to a Word Document and take the second screenshot and take it to a Word Document. I thought, I will write a tiny utility which will help me do this. Here is the requirement spec that I put up for it - An executable which once launched seats itself in the System Tray. While it is active, all instances of Key Press (Print Scrn), it should write the contents to a Word Document as defined (either a default path or a user defined one). Save the document periodically. Now, my question is - if I am going to develop this using C# (Winforms application), how do I go about doing this. I can do a fair bit of C# programming and I am willing to learn. But I am not able to locate the references for how to do a background process so that it runs in the background. And while it runs, it has to capture the Print Scrn command. Can you folks point me to the right material where I can learn this? Theoretical references should suffice. But if there are practical references, then nothing like it. Thanks!

  Read the article

• Javascript is not loading

  - by Oden

  Hey, I've got a problem with JavaScript under Ubuntu, that drives me crazy. I'm using Gedit for my web sites since I'm an Ubuntu user. When I start a new website I create (usually with the gnome terminal) folder structure, and I copy the files I need into them. The next step is creating an index.html where I build the design and basic JavaScript functionality. JavaScript is stored in a sub-folder of the project and when i try to load one using the tag in the header, my whole page body disappears. If the source contains a script tag with its own body, and its not the first its code wont run. I've tried to solve the problem by setting chmod to 777 with sudo chmod -R 777 . but nothing changed. CSS is loading correctly, but JS isn't. I'm using the newest version of apache, no mod_rewrite stuff, but i get the same problem when I run the html from file (file:///...) Do anyone know how to solve this problem?

  Read the article

• Is it bad to have a very full hard drive on a high traffic database server?

  - by MikeN

  Running an Ubuntu server with MySQL for a high traffic production database server. Nothing else is running on the machine except the MySQL instance. We store daily database backups on the DB server, is there any performance hit or reason why we should keep the hard disk relatively empty? If the disk is filled up to 86%+ with the database and all of the backups, does it hurt performance at all? So would the DB server running with 86-90%+ full capacity perform less well in any way than the server running with only a 10% full disk? The total disk size on the server is over 1 TB so even 10% of the disk should be enough for basic O/S swapping and such.

  Read the article

• external hard drive not detected after ubuntu crash [restarting machine]

  - by Netmoon

  today i tried to watch movie [with vlc media player] from my external hard drive [expansion portable 500 GB], and it's play good, then pause the movie and play it again, and my Ubuntu crashed! [Ubuntu 12.04]i had to restart the machine, so did it, but after that Ubuntu can't recognize this hard drive! i changed USB cable but it was not effective. this is my dmesg command result : [ 191.281630] usb 2-1.3: new full-speed USB device number 9 using ehci_hcd [ 191.353527] usb 2-1.3: device descriptor read/64, error -32 [ 191.529115] usb 2-1.3: device descriptor read/64, error -32 [ 191.704669] usb 2-1.3: new full-speed USB device number 10 using ehci_hcd [ 191.776524] usb 2-1.3: device descriptor read/64, error -32 [ 191.952202] usb 2-1.3: device descriptor read/64, error -32 [ 192.127772] usb 2-1.3: new full-speed USB device number 11 using ehci_hcd [ 192.534742] usb 2-1.3: device not accepting address 11, error -32 [ 192.606749] usb 2-1.3: new full-speed USB device number 12 using ehci_hcd [ 193.013696] usb 2-1.3: device not accepting address 12, error -32 [ 193.013906] hub 2-1:1.0: unable to enumerate USB device on port 3 note: I am able to hear the sound of the external drive lens. When attach hard drive to usb port, the status light goes on, but it's low bright and i think its power is low! try to mount in Microsoft Windows 7, but nothing happened.

  Read the article

• Square game map rendered as sphere with OpenGL

  - by Roflha

  Okay so I have been trying to find a good way to do this for a while now and so far I have nothing. For a hobby project of mine I have created a finite voxel world (similar to minecraft), but as I said, mine is finite. When you reach the edge of it, you are sent to the other side. That is all working fine along with rendering the far side of the map, but I want to be able to render this grid as a sphere. Looking down from above, the world is a square. I basically want to be able to represent a portion of that square as a sphere, as if you were looking at a planet. Right now I am experimenting with taking a circular section of the map, and rendering that, but it look to flat (no curvature around the edges). My question then, is what would be the best way to add some curvature to the edges of a 2d circle to make it look like a hemisphere. However, I am not overly attached to this implementation so if somebody has some other idea for representing the square as a planet, I am all ears.

  Read the article

• Deleting Time Machine in Mac OS X 10.6.4

  - by cappuccino

  Does anyone know how to delete Time Machine in Mac OS X 10.6.4? Before answering: sudo rm -rf /whateverthetimemachineis does not work Disabling the ACL permissions first with sudo fsaclctl -p /whatever -d does not work, sudo: fsaclctl: command not found Use the delete all backup feature in Time Machine... this is slow as hell, would take days. Need a command line solution. No I don't want to reformat the drive, I have other content on it, and no don't say I should have separated on two partition or two drives, I did it this say since partitions cannot be dynamically changed, and two drives is annoying since, whats the point of having a big drive?... plus has no relation to the issue at hand. Already googlied for hours and read everything on Super User, nothing working. and all solutions are the first 4. Any clues?

  Read the article

• functional requirements - use wording based on verbs?

  - by yas

  Question: Should the functional requirements in a requirements doc use wording based on verbs? Context: School assignment, working in a team, working through the SDLC. The requirements doc has been done and we are now into design. Problem: The requirements doc has an enumerated list of what I'd call features of the app - the functional requirements. In that list are things that I'd think of as "how's" rather than "what's" and now, trying to work on design, I feel like a part of design has been prematurely dictated. I've not done this before! To me, I should be dealing strictly with things that describe "what." Example of current: Pretend that the job is to make an omelet. Listing: crack the egg, break into bowl, scramble, etc.; crosses over the line into the territory of how. Along that track, so does wording like: create, generate, list, calculate, determine, validate, etc. - verbs, basically. Right now, I have a list of requirements that are partially rooted in verbs. My idea of a requirements doc for an omelet would be more like: has two eggs, x ounces of ham, x ounces of bacon, x ounces of montery-jack cheese, x ounces of cilantro, etc. - nothing but what (nouns). I might have, and could have, spoken up before finalizing the requirements doc if I'd had any experience.

  Read the article

• Downloading file from FTP using cURL

  - by Josiah

  I'm trying to use a cURL command to download a file from an FTP server to a local drive on my computer. I've tried curl "ftp://myftpsite" --user name:password -Q "CWD /users/myfolder/" -O "myfile.raw" But it returns an error that says: curl: Remote file name has no length! curl: try 'curl --help' or 'curl --manual' for more information curl: (6) Could not resolve host: myfile.raw; No data record of requested type I've tried some other methods, but nothing seems to work. Also, I'm not quite sure how to specify which folder I want the file to be downloaded to. How would I do that?

  Read the article

• Trouble with backup on SBS2008

  - by MemLeak

  We have an SBS2008 installation, which has a backup task. It creates a backup twice a day onto external storage. This worked for a long time. But the backup can't be performed now. The last valid backup was before some Exchange updates, SBS Update Rollup 8 and SharePoint updates were installed. The only error in Event Logs is for VSS (the Volume Shadow Service), which I only have in German. Things I've done: restart the server chkdsk /r /f for all volumes restart the VSS service googling manual backup Nothing's helped. How can I set up the backup again?

  Read the article

• How to determinate prerequisite of a setup ? DisplayLink on WindowsXP embedded wont start

  - by user35320

  Hi, I want to install DisplayLink on an embedded Windows XP device. The problem is that the setup starts and asked for my approval and after I confirmed it nothing happend. The setup just dissapear. On the official DisplayLink site there they say that they dont support embedded system but there must be a way to get this working on it. So I am searching for a tool to see what the setup is trying to open or what the preerequisite of it are to install it and try to get this working. Thanks for you help

  Read the article

• Does it make sense to write build scripts in C++?

  - by Klaim

  I'm using CMake to generate my projects IDE/makefiles, but I still need to call custom "scripts" to manipulate my compiled files or even generate code. In previous projects I've been using Python and it was OK, but now I'm having serious trouble managing a lot of dependencies in two very big projects I'm working on so I want to minimize the dependencies everywhere. Someone suggested to me to use C++ to write my build scripts instead of adding a language dependency just for that. The projects themeselves already use C++ so there are several advantages that I can see: to build the whole project, only a C++ compiler and CMake would be necessary, nothing else (all the other dependencies are C or C++); C++ type safety (when using modern C++) makes everything easier to get "correct"; it's also the language I know the better so I'm more at ease with it even if I'm able to write some good Python code; potential gain in execution speed (but i don't think it will really be perceptible); However, I think there might be some drawbacks and I'm not sure of the real impact as I didn't try yet: might be longer to write the code (that said I'm not sure because I'm efficient enough in C++ to write something that work quickly, so maybe for this system it wouldn't be so long to write) (compilation time shouldn't be a problem for this case); I must assume that all the text files I'll read as input are in UTF-8, I'm not sure it can be easilly checked at runtime in C++ and the language will not check it for you; libraries in C++ are harder to manage than in scripting languages; I lack experience and forsight so maybe I'm missing advantages and drawbacks. So the question is: does it make sense to use C++ for this? do you have experiences to report and do you see advantages and disadvantages that might be important?

  Read the article

• How do I bridge my wireless to my wired connection?

  - by gatoatigrado

  I want to bridge the wireless connection with the wired connection. The wireless is the host and the wired is the client, so to speak. Internet sharing (inet <--> wifi <--> ethernet) I tried to bridge my ethernet connection by going to network manager edit connections wired edit IPv4 settings shared to other computers Screenshots However, it seems to automatically disconnect half a second after it says "connection established"! edit 2 got the network manager logs, it seems the address is in use. See http://pastebin.com/DjqRshxW , line 45. nm-tool output is here: http://pastebin.com/x5Aci5V1 . I tried firestarter, as mentioned in another thread, and no luck. I don't have time to bother with a dozen command line tricks, unless is copy & pasting a shell script... so please suggest ways that use GUIs and/or won't leave my computer in a confused state (e.g. disabling network manager, manually connecting to a WPA network, installing brutils, etc.). edit: one idea that would work, if it's possible -- is there a way to share connections via SSH and SOCKS5? I'd need to do this at a system-wide level though; I only know how to do it through the browser now. Then, I could run ifconfig eth0 192.168.4.1 on the computer sharing the inet, and ifconfig eth0 192.168.4.2 on the computer I'm trying to share with; I know this does work for host-to-host transfers. edit 3 If I run sudo killall dnsmasq, then nothing is using the 10.42.43.1 address the network manager sharing wants to use. But now it just takes longer to die, with error "NetworkManager[5935]: dnsmasq died with signal 9" [ http://pastebin.com/4FNtpugi ]. Looking at just the commands [ http://pastebin.com/1vrtQeWk ], maybe it's trying to route eth0 to itself? I'm not that familiar with networking things though.

  Read the article

• Moving domain currently on Google Apps to my own machines

  - by mag

  I own a domain which currently uses Google Apps (it was free back then). Due to recent events I have decided I want to move everything right where I can control the data, which basically means I have the idea of either using a dyndns solution and have at home my own mail server or, better, use an hosted machine to retrieve the mail and the move it via mua to a local machine. My problem is that I know basically next to nothing about DNS and stuff, while I have installed mail servers before. :) [I simply never had the need to work with DNS...] I'd really appreciate if someone could point me in the right direction: what do I need to do to: terminate the Google Apps management of the domain setup dns entries to that mail goes to the new server instead of Google Apps Additionally: if I decide to go the "hosted route" and I put up a machine via a supercheap hosting seller (say, the cheapest OVH one is a few euros a month), how can I tell the world that that machine is the mail server? Of course I would be wise to do a full backup of the mail on Google Apps, and that's easy enough to do by imap (right?).

  Read the article

• DVI problem with LG L204WT

  - by Holgerwa

  I have a LG L204WT which has VGA and DVI connectors. Until recently, I have used the monitor via VGA, but now I have upgraded the graphics board and switched to DVI. The problem is that each time after the computer starts, the monitor either doesn't show anything (black screen, but doesn't go into standby) or the picture is distorted. I then switch the monitor off and on several times, and at some point it starts correctly and then I can work as usual. This only happens on startup. It is one out of 3 monitors, the other two work fine. It seems to me as if the monitor is not able to synchronize on the DVI signal and either shows a distorted picture or nothing at all. There are no settings in the monitor setup that would change anything. What could be the problem?

  Read the article

• Dualboot (Win 8 / Ubuntu 13) is stuck at 'switching to clocksource'

  - by Daniel Puscht

  for days I have been crawling the web for solutions to my problem, but couln't find any. Here it is: I got a new Laptop (ASUS Vivobook S200E) with Win 8 OEM preinstalled. I wanted to create a dual-boot system with Ubuntu 13 next to it. I read about UEFI and that I have to turn of Secure Boot and use the existing EFI partition as bootloader for Ubuntu. So I did. I also ran boot-repair reinstalling the GRUB. The result is when I start the computer I get into the boot menu. So far, so good. When I pick Win everthing is fine. But when I choose Ubuntu (recovery) the system starts, but gets stuck at the line '[1.806366] Switching to clocksource tsc'. I already tried other versions of Ubuntu (12.04.2, 12.10). I played with boot-repair (using the recommended fix, setting everything manually). But nothing works. It's always the same issue. I read that it could be a problem concerning graphic drivers, but this I can hardly believe. If this is any help, boot-repair gave me this link to post in fora. http://paste.ubuntu.com/5810391/ Thanks for any help in advance

  Read the article

• Lenovo ThinkServer TS130 1105 - does 32/64 depend on RAM?

  - by Ecnerwal

  Just got in a Lenovo ThinkServer TS130 1105 (Xeon E3-1225V1) and a (new, sealed, holographed, looks legit) copy of Windows Server 2008 32/64 (standard) to run on it for a pretty lightweight job (currently handled, adequately, by a terrifyingly old Optima P4 running Windows 2000 server - really lightweight, but long-past-due for replacement, without any particular need or excuse for server 2012...) The 64 bit disc sits there and does nothing. The 32 bit disc boots. I haven't spotted any mention of this in the TS130 Manual (I have now combed it, and find no mention of a need to populate in pairs - a preferred order to populate in, yes, but no mention of pairs being required) but I begin to wonder if it's due to the fact that the 4GB RAM suppled with it was a single DIMM, rather than a pair. Better for upgrading, but perhaps requiring an upgrade (or sidegrade) right away to install the x64 version?? Anyone know? I tried the 64-bit DVD on a desktop with an AMD Athlon II X4 635 processor which normally runs Windows7 in 64 bit, and it booted up just fine.

  Read the article

< Previous Page | 318 319 320 321 322 323 324 325 326 327 328 329  | Next Page >