Search Results

Search found 10402 results on 417 pages for 'pc maintenance'.

Page 323/417 | < Previous Page | 319 320 321 322 323 324 325 326 327 328 329 330  | Next Page >

  • Ubuntu 13.10 No Sound

    - by spiersie
    I was running 13.04 since last monday and just today i upgraded to 13.10, in both of these version i have not managed to get my sound working. I have gone into alsamixer and disabled auto mute and the volumes are up. However if somebody thinks they can help me fix this i will gladly follow any steps. Please lay specifically any terminal commands you need me to do to either show specs or solve the problem as i am not fluent with the linux commands, this desktop being my first system to run linux, starting last monday. blake@Blake-Ubuntu-PC:~$ lspci -v | grep -A7 -i "audio" 00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Trinity HDMI Audio Controller Subsystem: ASUSTeK Computer Inc. Device 8526 Flags: bus master, fast devsel, latency 0, IRQ 53 Memory at fef44000 (32-bit, non-prefetchable) [size=16K] Capabilities: Kernel driver in use: snd_hda_intel 00:10.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller (rev 03) (prog-if 30 [XHCI]) 00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller (rev 01) Subsystem: ASUSTeK Computer Inc. Device 8445 Flags: bus master, slow devsel, latency 32, IRQ 16 Memory at fef40000 (64-bit, non-prefetchable) [size=16K] Capabilities: Kernel driver in use: snd_hda_intel 00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 11)

    Read the article

  • Added resolution not working after upgrading to 12.04

    - by David
    After upgrading, my screen resolution (added by xrandr comands on the start) did not work like before. Messages appear showing some errors (that i have never had in 11.10). "No se pudo aplicar la configuración almacenada para los monitores"/"Can't apply the stored configuration for the monitors." This script didn't work either. xrandr --newmode "1280x1024_60.00" 109.00 1280 1368 1496 1712 1024 1027 1034 1063 -hsync +vsync xrandr --addmode VGA1 1280x1024_60.00 xrandr --output VGA1 --mode 1280x1024_60.00 I also tryed deleting monitors.xml but, nothing. This only erase the window message. It's been sayd that ##It's a normal buggy and well know problem for Pc's with Intel integrated video cards.## The new version of gnome-settings-daemon stores its configuration information in dconf rather than gconf. I tryed something, but the problem persist. This is what i did. Install the dconf-tools package, and then run dconf-editor. In the tree on the left, navigate org - gnome - settings-daemon - plugins - xrandr. Uncheck the active checkbox. restart your XServer (Ctrl+Alt+Backspace) (It didn't worked out for me, but it may be helpful to someone)

    Read the article

  • Why can't I install 10.04 on a system that already has 8.04?

    - by Android Eve
    Ubuntu 10.04 is beautiful. I love it. I am dying to install it on my PC, alongside the existing Ubuntu 8.04 (from which I write this message right now). But... it won't let me! When I reach the partitioning stage (manual!) Ubuntu 10.04 sees my two HDDs as one RAID volume. It doesn't see all the partitions I already have in place in /dev/sda and /dev/sdb. Even Windows 7 doesn't behave like this... (yes, I actually managed to install Windows 7 64-bit in dual-boot configuration with Ubuntu 8.04 on this same system). Note: GParted on Ubuntu 10.04 (live CD) sees the partition intended for Ubuntu 10.04 (/dev/sda4) perfectly, but is unable to format it. Note: I also removed that partition trying to reformat it via GParted once 10.04 LiveCD is loaded. It didn't help. I believe that the problem lies in Ubuntu "deciding for me" that the HDDs should be "seen" as a RAID, hence any partition is seen by GParted as "busy" or "locked". Any idea how to solve this problem?

    Read the article

  • Windows Embedded Compact 7

    - by Valter Minute
    This will be the official name of the new release of Windows CE. Windows Embedded Compact 7 is available as a public CTP and it already supports a wide range of CPUs and both the device emulator and VirtualPC emulated environments. So I’ll have to learn a new (and longer) name for my favorite OS… but I (and all my two readers!) will be able to test it as soon as the download from connect web site completes (I'm sorry for my readers, but you'll have to download it by yourselves). Here’s a link for the download (it's free but you’ll have to register on connect with a valid LiveId): https://connect.microsoft.com/windowsembeddedce Remember that this is still a beta (or “Community Technology Preview” if you speak marketing language) and so it’s better to not install it on your main development PC (or, at least, backup everything before installation) and that the features and performances you’ll get from this beta may not be the same ones of the final release of the OS. You can discover the new features of Windows Embedded Compact on the new “official” webpage on microsoft website: http://www.microsoft.com/windowsembedded/en-us/products/windowsce/compact7.mspx or on Olivier’s blog: http://blogs.msdn.com/b/obloch/archive/2010/06/01/windows-embedded-compact-7-announced-and-public-ctp-available.aspx I hope to be able to post some interesting content about Windows Embedded Compact 7 soon (and maybe be able to shorten it’s name in CE7 in my blog posts, when I'll ensure that both my readers are not worketing for Microsoft's marketing department …). Technorati Tags: "Windows Embedded Compact 7"

    Read the article

  • Location of development solutions on disk - Common or upto the individual

    - by dreza
    In our team meeting today a senior member brought up the proposal that we should be having a common location/structure for our development solutions. A couple of his points were: Making it common meant when talking about projects and emailing stuff everyone is on the same wavelength and knows where to look. If there is ever the need to hard code a location path then it will work across all developers pc's. He had a more few points to back up his suggestion but I unfortunately got distracted during the discussion and so didn't hear all of them. I have no issue with the idea and can see it's merits but I was wondering if it is common or even recommended that all developers place their code in the same folder structure. Or do developers like to have the flexibility of location solutions where-ever they want? We currently use SVN for our version control. In this case his recommendation was to place all code in: c:\Work\Development\<Customer>\<project>\Code\<solution>\ the code I guess actual path is irrelevant for this question but added for completeness.

    Read the article

  • BCM2046B1 Bluetooth Dongle connection problem

    - by Andfoy
    Well i have a Blueooth dongle with an BCM2046 IC intrregated, my problem is that when i connect it, Ubuntu recognize it, but it don't work whe i try to scan or scan the PC from other device, i replaced the default Gnome Bluetooth manager and i installed Blueman, but the problem presists. The Bluetooth LED indicator appears to be "working". I'm using 11.10 Oneiric Ocelot hcitool dev: Devices: hci0 89:21:XX:XX:XX:XX lsusb: Bus 002 Device 003: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth) Bus 002 Device 004: ID 0a5c:2100 Broadcom Corp. Bluetooth 2.0+eDR dongle hciconfig -a: hci0: Type: BR/EDR Bus: USB BD Address: 89:21:XX:XX:XX:XX ACL MTU: 1017:8 SCO MTU: 64:0 UP RUNNING PSCAN ISCAN RX bytes:1329 acl:0 sco:0 events:40 errors:0 TX bytes:671 acl:0 sco:0 commands:35 errors:0 Features: 0xff 0xff 0x8d 0xfe 0x9b 0xf9 0x00 0x80 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH HOLD SNIFF PARK Link mode: SLAVE ACCEPT Name: 'ubuntu-0' Class: 0x4a0100 Service Classes: Networking, Capturing, Telephony Device Class: Computer, Uncategorized HCI Version: 2.0 (0x3) Revision: 0x4000 LMP Version: 2.0 (0x3) Subversion: 0x430e Manufacturer: Broadcom Corporation (15) Sorry for my English and thanks for any hints.

    Read the article

  • Broadcom BCM4313 takes ages to connect

    - by Drazgo
    I'm having issues with my broadcom BCM4313 wireless adapter. Everything works just fine when connected (with additional drivers & Connman), but it takes about 5 minutes to connect to my network when i just started my computer! When resuming from hibernation it goes very quick though, so just when I boot my pc it's taking forever... This is what I found in the dmesg output: [ 16.778057] eth1: Broadcom BCM4727 802.11 Hybrid Wireless Controller 5.60.48.36 [ 16.808768] type=1400 audit(1295859939.727:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=833 comm="apparmor_parser" [ 16.808815] type=1400 audit(1295859939.727:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=799 comm="apparmor_parser" [ 16.808825] type=1400 audit(1295859939.727:4): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=826 comm="apparmor_parser" [ 16.809367] type=1400 audit(1295859939.727:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=833 comm="apparmor_parser" [ 16.809415] type=1400 audit(1295859939.727:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=799 comm="apparmor_parser" [ 16.809435] type=1400 audit(1295859939.727:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=826 comm="apparmor_parser" [ 16.809705] type=1400 audit(1295859939.727:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=833 comm="apparmor_parser" [ 16.809755] type=1400 audit(1295859939.727:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=799 comm="apparmor_parser" [ 16.809769] type=1400 audit(1295859939.727:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=826 comm="apparmor_parser" [ 16.844083] alloc irq_desc for 22 on node -1 [ 16.844087] alloc kstat_irqs on node -1 Any ideas how come? Thanks in advance!

    Read the article

  • Intel 5100 AGN disconnects and then disables my Verizon FiOS Actiontec router

    - by Anthony
    I am a new user (my first trial) of Ubuntu and booted up my Windows Vista laptop up with the Ubuntu CD. I was able to connect wirelessly to my router and stay connected for about a minute. After that it would disconnect and my router would be disabled: none of my other wireless devices would see the signal any longer, as if it disappeared. I would have to cycle the router's power toggle off/on to get it to come back on and put out a signal again. This happened repeatedly. I experienced no other problems trying the software (i.e., accessed my files w/o issue). I did not attempt to connect with an Ethernet cable. Here are the specs on my system: laptop is HP Pavilion dv5 Notebook PC system type is 64-bit operating system CPU is Intel Core 2 Duo P8600 2.4GHz ram is 4 GB network card is Intel WiFi Link 5100 AGN I read elsewhere in this forum that 64-bit systems may not be compatible with Ubuntu. Can anyone help me with this? I'd really like to be able to use this op system.

    Read the article

  • OS choice for functional developing

    - by Carsten König
    I'm mainly a .NET developer so I normaly use Windows/VisualStudio (that means: I'm spoiled) but I'm enjoying Haskell and other (mostly functional) languagues in my spare time. Now for Haskell the windows-support is ok (you can get the Haskell-Platform) but latley I tried to get a basic Clojure/Scheme environment set up and it's just a pain on windows. So I'm thinking about trying out another OS for better tooling and languague support. Of course that leaves me with MacOS or some Linux distribution. I never used MacOS before and of course Linux would be cheaper (free) and I don't think I can parallel-boot MacOS on your normal PC-Hardware (can you?). PLUS: I don't have a clue about the tools you can use on those (to me) forign OSs. To make it short: I want to explore more Haskell, Clojure, Scala, Scheme and of course need at least good tooling for JavaScript/HTML5/Css. Support for .NET/Mono/F# would be great but for this I will still have my Win7 boot. So I like to know: - what is your prefered OS, Distribution (is Ubuntu viable?) - what Editor/IDE are you using Thank you for your help! PS: I'm not sure if this is the right place for this question but I surely hope so - if not please let me know where I should move this to (StackOverflow don't seem to be the right place IMHO)

    Read the article

  • Ubuntu server 11.04 recognize only 1 core instead of 4

    - by Kreker
    I searched for other questions and googled a lot but I don't find a solution for solving this problem. Ubuntu Server 11.04 64bit installed on Dell Poweredge with Intel Xeon X5450. He only recognize 1 of the 4 cores I have. Tried to modify the GRUB config but didn't work. IN the machine BIOS I didn't find anything useful. CPU root@darwin:~# cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Xeon(R) CPU X5450 @ 3.00GHz stepping : 10 cpu MHz : 2992.180 cache size : 6144 KB physical id : 0 siblings : 1 core id : 0 cpu cores : 1 apicid : 0 initial apicid : 0 fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm dca sse4_1 xsave lahf_lm dts tpr_shadow vnmi flexpriority bogomips : 5984.36 clflush size : 64 cache_alignment : 64 address sizes : 38 bits physical, 48 bits virtual power management: GRUB root@darwin:~# cat /etc/default/grub # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. # For full documentation of the options in this file, see: # info -f grub -n 'Simple configuration' GRUB_DEFAULT=0 #GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=2 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="" GRUB_CMDLINE_LINUX="noapic nolapic" #was with acpi=off # Uncomment to enable BadRAM filtering, modify to suit your needs # This works with Linux (no patch required) and with any kernel that obtains # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only) #GRUB_TERMINAL=console # The resolution used on graphical terminal # note that you can use only modes which your graphic card supports via VBE # you can see them in real GRUB with the command `vbeinfo' #GRUB_GFXMODE=640x480 # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux #GRUB_DISABLE_LINUX_UUID=true # Uncomment to disable generation of recovery mode menu entries #GRUB_DISABLE_RECOVERY="true" # Uncomment to get a beep at grub start #GRUB_INIT_TUNE="480 440 1" Complete dmesg Too long, posted on pastebin http://pastebin.com/bsKPBhzu

    Read the article

  • How to know why my cd is not booting?

    - by Tom Brito
    I have downloaded Ubuntu 10.10 and burned the ISO but it will not boot. I discarded problems with the ISO, as I've downloaded from the official website with no errors, and burned it with no errors. I discarded problems with the burning, as looks like it was recorded with no errors here and later in another computer. I discarded problems with my DVD reader as other cds boots fine. I'm currently using Ubuntu 9.10, I know I can upgrade via internet, but I have this same problem with my Windows XP cd, so I really would like to discover what's going on here.. My Ubuntu 9.10 cd boots just right, but the new one not. What else can be? Or what more precise tests can I make to discover where's the problem? --More info What happens when I try to boot with the Ubuntu 10.10 cd is that it behavior like there's no bootable cd in the drive. It just don't find the boot on the cd, and start the HD system. My notebook is an Amazon PC Intel Celeron 1.5 with 2Gb memory, a DVD-RW driver, HD samsung with 260GB.

    Read the article

  • Ubuntu 12.04.1 LTS and Nvidia dirver (304.51) 64bit: problem 640x480

    - by nibianaswen
    I have a problem with this configuration: Asus K55V, Ubuntu 12.04 LTS and Nvidia driver 304.51. I have remove the nouveau driver with: apt-get --purge remove xserver-xorg-video-nouveau I installed the official nvidia driver (from www.nvidia.com) but when I reboot the PC the resolution of screen is only 640x480 and the monitor is resized. Mo solution at this problem if i change the xorg.conf. Now i have uninstall the nvidia driver and reinstall with sudo apt-get purge nvidia-current sudo apt-add-repository ppa:ubuntu-x-swat/x-updates sudo apt-get update sudo apt-get install nvidia-current When I reboot the screen resolution and size is OK, but if I start nvidia-setting I received the message: You do not appear to be using the NVIDIA X driver. and with command: sudo lshw -c display | grep driver I received configuration: driver=i915 latency=0 This sound like the system is using the Intel card. When I launch command lspci | grep VGA the output is: 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation Device 1058 (rev ff) And there is no /etc/X11/xorg.conf. I have read a lot of guides on internet but without success.. How i can use nvidia card with the driver that i have installed?

    Read the article

  • How can i install ubuntu on my ntfs hdd without formatting?

    - by Ridvan Coban
    My hdd is just one partition in ntfs (500gb) and 430 gb is used by my photos/movies/music etc which i never will want to lose. Actually i installed ubuntu on a usb flash drive (using it right now) but it is too slow that way. But my problem is : My computer is damaged ( maybe chipset or but not sure) and none of the windows versions (xp,vista,7) works on my pc. I get blue screen error as soon as windows startup logo shows. But ubuntu just works flawless. That means i cannot use wubi. I wanted to shrink my hdd without losing data (which can be done in windows) but found nothing about that on ubuntu forums. Is this possible? Or install ubuntu on my ntfs filesystem? Note : I don't have chance to backup 400 gbs of data. Sorry for my question if it's written a bit compex. I hope you get the point and someone has an idea ;)

    Read the article

  • Interview questions for programming tutor?

    - by Emmett Gear
    My family is looking for a programming/computer science tutor. Personally, I want to learn Java or some other brand of web programming. I am best described as a PC "power user." I have never programmed in the past and would like a good jump start. I am a very quick learner and do not expect the tutor to have to teach me the ultra basic stuff that I can learn myself. My son also needs a programming tutor. He just got into Carnegie Mellon as a computer science major. Having done only robotics and mathematics in the past he is very nervous that he does not have the same level of knowledge as his future classmates. I need some help coming up with a list of questions to ask potential tutors and some criteria to judge them by. Thanks! Edit: So far I have come up with just the obvious... Where did you receive your education? What languages are you familiar with? How long have you been tutoring? What made you decide to become a tutor? What software projects have you worked on? What work references can you give me? How much do you charge?

    Read the article

  • 12.04 WiFi issue on a particular access point

    - by user71706
    I have a WiFi access point that I connect to a PC to share its Internet connection with multiple machines, in a training environment. All the machines with 11.04 connect to this access point with no problem, and can access any server on the Internet. These machines have an Intel Wireless -N 1030 BGN chipset (as reported by lspci). Now, my problem is that I don't manage to connect 12.04 machines to this wireless network. The systems I tried do manage to connect (confirmed by Network Manager), but when I try to access a website like http://kernel.org, the browser shows "Connecting to kernel.org...", but displays a "The connection has timed out" error page. Other symptoms: Name resolution works (for example 'nslookup kernel.org') finds kernel.org's IP address 'ping kernel.org' doesn't work The same 12.04 machines have no problem at all with other wireless networks. So there is probably something weird in my access point (though the 11.04 machines are not impacted). Would you have any suggestions for investigating this issue? Thanks, Michael.

    Read the article

  • Boolean checks with a single quadtree, or multiple quadtrees?

    - by Djentleman
    I'm currently developing a 2D sidescrolling shooter game for PC (think metroidvania but with a lot more happening at once). Using XNA. I'm utilising quadtrees for my spatial partitioning system. All objects will be encompassed by standard bounding geometry (box or sphere) with possible pixel-perfect collision detection implemented after geometry collision (depends on how optimised I can get it). These are my collision scenarios, with < representing object overlap (multiplayer co-op is the reason for the player<player scenario): Collision scenarios (true = collision occurs): Player <> Player = false Enemy <> Enemy = false Player <> Enemy = true PlayerBullet <> Enemy = true PlayerBullet <> Player = false PlayerBullet <> EnemyBullet = true PlayerBullet <> PlayerBullet = false EnemyBullet <> Player = true EnemyBullet <> Enemy = false EnemyBullet <> EnemyBullet = false Player <> Environment = true Enemy <> Environment = true PlayerBullet <> Environment = true EnemyBullet <> Environment = true Going off this information and the fact that were will likely be several hundred objects rendering on-screen at any given time, my question is as follows: Which method is likely to be the most efficient/optimised and why: Using a single quadtree with boolean checks for collision between the different types of objects. Using three quadtrees at once (player, enemy, environment), only testing the player and enemy trees against each other while testing both the player and enemy trees against the environment tree.

    Read the article

  • Can a candidate be judged by asking to write a complex program on "paper"?

    - by iammilind
    Sometime back in an interview, I was asked to write following program: In a keypad of a mobile phone, there is a mapping between number and characters. e.g. 0 & 1 corresponds to nothing; 2 corresponds to 'a','b','c'; 3 corresponds to 'd','e','f'; ...; 9 corresponds to 'w','x','y','z'. User should input any number (e.g. 23, 389423, 927348923747293) and I should store all the combinations of these character mapping into some data structure. For example, if user enters "23" then possible character combinations are: ad, ae, af, bd, be, bf, cd, ce, cf or if user enters, "4676972" then it can be, gmpmwpa, gmpmwpb, ..., hnroxrc, ..., iosozrc Interviewer told that people have written code for this within 20-30 mins!! Also he insisted I have to write on paper. If I am writing a code then my tendency is as of I am writing production code, even though it may not be expected from me. So, I always try to think all the aspects like, optimization, readability, maintainability, extensible and so on. Considering all these, I felt that I should be writing on PC and it needs decent 2 hours. Finally after 25 mins, I was able to come up with just the concept and some shattered pieces of code (not to mention of my rejection). My question is not the answer for the above program. I want to know that is this a right way to judge the caliber of a person ? Am I wrong / too slow in the estimates ? Am I too idealistic ?

    Read the article

  • Failure to Boot Windows 7 after Ubuntu install

    - by Mike
    My computer is a (brand new) PC notebook, without a CD drive running Windows 7. I followed this page to install from USB: https://help.ubuntu.com/community/Installation/FromUSBStickQuick The installation went well and i am using Ubuntu now (v. 12.04 i believe) I want to be able to dual boot Ubuntu and Win7 The problem is that the disc partitioning during the Linux install caused a problem with Windows, caused some problem with windows, and windows can no longer boot when i choose it at the GNU GRUB screen. When i restart my computer i can successfully boot Linux, but not Windows 7. At the GRUB screen - if i run Win7 normally, it freezes, shows a blue screen, and returns back to GRUB - if i run Win7 recovery, i dont know how to access the files that i need in order to run windows again, so nothing helpful happens. Can you please tell me what i would need to do(or link a guide) in order to run Windows again. (Windows and Linux is preferable, but if thats impossible going back to only Windows will help too) Im guessing the easiest thing to do is just to reinstall both OS, or is there anyway to undo the partition i made during the install? Thanks

    Read the article

  • Update usb Driver

    - by Enrico Caponi
    i just now start to use Xubuntu, and i install Xubuntu on my second laptop i had in my garage, just for put back in use. On the ASUS xubuntu work really perfect but now after i put on my old laptop i have some little proble. My Laptop old is a Fujitsu Siemens AMILO L7310GW, i explain my problem: The installation works fine, everything is quite good but there are few little problem i have a know idea, how I can fix them... so USB: i have a optical mouse usb and works quite strage, when i tip on terminal "lsusb" the system recognized fine my mouse but the strange thing is the mouse it move like jump around the desktop. what i had done: - update the usbdrive - change mouse - tried mouse on different pc and on both they work fine another problem i don't know where came from: when i take off my mouse, and try to put back doesn't work at all, if i want back i have to restart the OS. and no usb pen or other ar working so for that i think is usb problem. i can tell before Xubuntu whit winXP the usb work fine, but i don't want windows anymore... So i tried almost everything you can find on the net, maybe i have done something wrong so please help me. I tried also to install the new version 12.04, but i came back for the 11.10.

    Read the article

  • Why has my internet speed dropped down?

    - by Door Knob
    I recently switched to Ubuntu. I've been having a lot of internet troubles ever since. I used Windows 7 before. I've had trouble loading web pages, and it would take a solid minute or two to even start displaying anything. Why is this? How can I fix this? Details: Ubuntu 14.04 ifconfig: eth0 Link encap:Ethernet HWaddr f0:4d:a2:2c:59:42 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:21 Memory:f7ae0000-f7b00000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:785 errors:0 dropped:0 overruns:0 frame:0 TX packets:785 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:70511 (70.5 KB) TX bytes:70511 (70.5 KB) wlan0 Link encap:Ethernet HWaddr 14:da:e9:b0:9d:66 inet addr:192.168.2.12 Bcast:192.168.2.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:11979 errors:0 dropped:0 overruns:0 frame:0 TX packets:10503 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:13659505 (13.6 MB) TX bytes:1449698 (1.4 MB) Here's a comparison: Speedtest on my phone: Speedtest on my PC: Taken about 30 seconds apart.

    Read the article

  • Effect of using dedicated NVidia card instead of Intel HD4000

    - by Sman789
    Short version: Can someone please advise me of the effect of adding a dedicated NVIDIA GeForce GT 630M card to an Ubuntu laptop in terms of power consumption and performance gains/losses when doing general productivity tasks and booting up. Also, how good are the closed source, open source, and Bumblebee drivers for these newer cards compared to support for the Intel HD4000? Long version/Background, if any info here is helpful: I'm thinking of ordering a laptop from PC Specialist (a UK company who actually sell machines without Windows pre-installed) with the following specifications: Genesis IV: 15.6" AUO Matte 95% Gamut LED Widescreen (1920x1080) Intel® Core™i5 Dual Core Mobile Processor i5-3210M (2.50GHz) 3MB 4GB SAMSUNG 1600MHz SODIMM DDR3 MEMORY (1 x 4GB) 120GB INTEL® 520 SERIES SSD, SATA 6 Gb/s (upto 550MB/sR | 520MB/sW) Intel 2 Channel High Definition Audio + MIC/Headphone Jack GIGABIT LAN & WIRELESS INTEL® N135 802.11N (150Mbps) + BLUETOOTH Now, as I want this laptop mainly for work and not for games, I would be more than content with the HD4000 integrated chip which comes with the processor. However, for compatibility reasons, I am not able to get the specs I want unless I choose a NVIDIA GeForce GT 630M 1GB graphics card, which I don't have a great deal of use for. I'm willing to buy it, however, as it's still cheaper than any other laptop with the specs I want. However, I know that Linux power management isn't fantastic with open-source graphics drivers, and I don't much about Bumblebee. Basically, whilst I'm happy to 'tolerate' the card being there, I don't want to experience any negative effects on the rest of my system (battery, performance etc) and if there are likely to be any, I might reconsider my purchase. So if anyone can advise me on the effects, I would be very grateful, since I doubt I can just turn the card off. Thankyou for any assistance :)

    Read the article

  • Automatic syncing USB HD drive to local HD (different computers)

    - by luri
    I have a desktop PC at work, and a laptop at home.... or elsewhere. What I want to do is use a USB HD to store my documents (about 130 Gb, maybe more). That would serve as backup and also port my files to my laptop. I'd like any of both computers to automatically sync all files there with local copies, so that I can work at either of them and keep updated copies of everything in both (plus the USB drive, which would allow me to work in other computers, too, apart from being another backup). Dropbox ins't a solution for me, due to pricing and 100Gb limit. The workflow would be as follows, to clear things up: I work on PC1. Changes in files are automatically synced to USB whenever a file is modified. I go home and boot PC2. I plug the usb drive and local files are synced (if changed) with the most recent usb copies. While I work at PC2, again, changes in files spread to my USB drive. Whenever I go to PC1 again, I plug my usb and again everything synces. So the questions would be: a) Am I crazy? b) Can it be done? c) Will I have any file conflicts (provided I'm the only one that will modify the files)?

    Read the article

  • Picking a suitable resolution for a modern low-res game?

    - by MrKatSwordfish
    I'm working on a 2D game project right now (using SFML+OpenGL and C++) and I'm trying to figure out how to go about choosing a resolution. I want my game to have a pixel resolution that is around that of classic '16bit' era consoles like the Super Nintendo or Neo Geo. However, I'd also like to have my game fit the 16:9 aspect ratio that most modern PC monitors use. Finally I'd like to be able to include an option for running full screen. I know that I could create my own low-res 16:9 resolution that is more-or-less around the size of SNES or NeoGeo games. However, the problem seems to be that doing so would leave me with a non-standard resolution that my monitor would not be able to support in fullscreen mode. For example, if i divide the common 16:9 resolution 1920x1080 by 4, I would get a 16:9 resolution that is relatively close to the resolution used by 16bit era games; 480x270. That would be fine in a windowed mode, but I don't think that it would be supported in fullscreen mode. How can I choose a resolution that suits my needs? Can I use something like 480x270? If so, how would I go about getting fullscreen mode to work with such a non-standard resolution? (I'm guessing OpenGL/SFML might have a way of up-scaling...but..)

    Read the article

  • Raspberry Pi, Time Capsule Progress

    - by Richard Jones
    So by way of an update. I thought all was good with my Raspberry Pi, Debian and Netatalk Apple Time Capsule Clone. However something very strange going on. Although I could backup my Mac's + PC's fine to Raspberry Pi with external USB HD; strangely with RPI running, I couldn't use AirPlay. I found myself unable to play anything from Mac to Apple TV. So after lots of trying to make this work, I about turned and finally went out and got myself a 2TB Apple Time Capsule. More cash than I would want to spend on anything like this, but Apple you got me. I would like to offer a top tip, which maybe goes a small way to justifying silly expenditure... You can easily add a USB HD to any Time Capsule. I've just added a 3 TB external USB HD, giving me a 5 TB of total backup grunt. 3 TB External USB HD, was peanuts by comparison to Apple kit. So all working, its all solid as you'd expect.Apple 2, maybe me .5. But strong, solid backups now happening, without hassle (but a bit of a credit card bill to follow)

    Read the article

  • Problem graphics with ATI Radeon x1270 (RS690M) on Ubuntu 12.04

    - by Giuseppe Della Corte
    I'm Italian and so I apologize for my English! I'm a beginner to Ubuntu and I tried it on my desktop PC and it's fantastic, fast and fun! I decided to try it on my netbook Packard Bell DOT M/A and this is the configuration: AMD Athlon L110 1.2GHz 2GB of RAM ATI Radeon x1270 (RS690M) 150GB Hard Disk I installed Ubuntu 12.04 with Wubi (dualboot Windows 7 + Ubuntu 12.04), because the netbook does not have a DVD player! During the installation everything is OK, after it was installed I see mistakes in the graphical display! I see objects that are seen in different colors and moving (buttons, mouse pointer, text bar ... etc ...) At one point came not to see anything, such as this screenshot: The drivers are open, that is already installed in Ubuntu. Windows 7 video card runs fine, can run well Aero (transparent window effects), I can watch movies in HD and play some games with the Catalyst drivers from AMD. Now I ask a favor, you can help me solve this problem? Is there a fix for this driver or drivers different on the Internet? Thanks for your attention, good bye!

    Read the article

< Previous Page | 319 320 321 322 323 324 325 326 327 328 329 330  | Next Page >