Search Results

Search found 13434 results on 538 pages for 'boot on power up'.

Page 325/538 | < Previous Page | 321 322 323 324 325 326 327 328 329 330 331 332  | Next Page >

• Cannot install grub to RAID1 (md0)

  - by Andrew Answer

  I have a RAID1 array on my Ubuntu 12.04 LTS and my /sda HDD has been replaced several days ago. I use this commands to replace: # go to superuser sudo bash # see RAID state mdadm -Q -D /dev/md0 # State should be "clean, degraded" # remove broken disk from RAID mdadm /dev/md0 --fail /dev/sda1 mdadm /dev/md0 --remove /dev/sda1 # see partitions fdisk -l # shutdown computer shutdown now # physically replace old disk by new # start system again # see partitions fdisk -l # copy partitions from sdb to sda sfdisk -d /dev/sdb | sfdisk /dev/sda # recreate id for sda sfdisk --change-id /dev/sda 1 fd # add sda1 to RAID mdadm /dev/md0 --add /dev/sda1 # see RAID state mdadm -Q -D /dev/md0 # State should be "clean, degraded, recovering" # to see status you can use cat /proc/mdstat This is the my mdadm output after sync: /dev/md0: Version : 0.90 Creation Time : Wed Feb 17 16:18:25 2010 Raid Level : raid1 Array Size : 470455360 (448.66 GiB 481.75 GB) Used Dev Size : 470455360 (448.66 GiB 481.75 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 0 Persistence : Superblock is persistent Update Time : Thu Nov 1 15:19:31 2012 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 UUID : 92e6ff4e:ed3ab4bf:fee5eb6c:d9b9cb11 Events : 0.11049560 Number Major Minor RaidDevice State 0 8 1 0 active sync /dev/sda1 1 8 17 1 active sync /dev/sdb1 After bebuilding completion "fdisk -l" says what I have not valid partition table /dev/md0. This is my fdisk -l output: Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00057d19 Device Boot Start End Blocks Id System /dev/sda1 * 63 940910984 470455461 fd Linux raid autodetect /dev/sda2 940910985 976768064 17928540 5 Extended /dev/sda5 940911048 976768064 17928508+ 82 Linux swap / Solaris Disk /dev/sdb: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000667ca Device Boot Start End Blocks Id System /dev/sdb1 * 63 940910984 470455461 fd Linux raid autodetect /dev/sdb2 940910985 976768064 17928540 5 Extended /dev/sdb5 940911048 976768064 17928508+ 82 Linux swap / Solaris Disk /dev/md0: 481.7 GB, 481746288640 bytes 2 heads, 4 sectors/track, 117613840 cylinders, total 940910720 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/md0 doesn't contain a valid partition table This is my grub install output: root@answe:~# grub-install /dev/sda /usr/sbin/grub-setup: warn: Attempting to install GRUB to a disk with multiple partition labels or both partition label and filesystem. This is not supported yet.. /usr/sbin/grub-setup: error: embedding is not possible, but this is required for cross-disk install. root@answe:~# grub-install /dev/sdb Installation finished. No error reported. So 1) "update-grub" find only /sda and /sdb Linux, not /md0 2) "dpkg-reconfigure grub-pc" says "GRUB failed to install the following devices /dev/md0" I cannot load my system except from /sdb1 and /sda1, but in DEGRADED mode... Anybody can resolve this issue? I have big headache with this.

  Read the article

• Having problems loading Ubuntu on my external Hard Drive

  - by anonymous

  I installed Ubuntu on my external hard drive but it won't boot on my laptop. It works fine on my desktop but not my laptop. It says it can't find root... what do i do?

  Read the article

• Auto re-attach EBS volume on start-up?

  - by Phillip Oldham

  I'm setting up a database server on EC2, and I need to ensure that an EBS volume is automatically attached and is available before the database service starts up. I'm using SMF so I can test whether a particular filesystem is available before starting the db service, so there's no problem from that perspective, however I'm not quite sure how to tell the server to auto-attach the EBS volume during/after boot. What would be the best strategy for this?

  Read the article

• Batch script for unattended install of a software

  - by Spidfire

  Ive got a few programms i need to install every time i reinstall a computer office 2003 Pro office 2007 compatibility pack Adobe acrobat Adobe flash but i hate to do this every time on every computer ive already made a batch script when i boot xp the first time after reinstall like @echo off "I:\installs\adobe reader\setup.exe" pause "I:\installs\office 2003\setup.exe" pause "I:\installs\office compatibilitiy\setup.exe" but it doesnt install automatic, is that possible?

  Read the article

• Are flash drives always bootable?

  - by user23950

  I have this 8 gb toshiba flash drive and my motherboard also allows booting from removable devices. But I don't know, I've already tried to make the fd bootable and set in the bios to boot from fd. But it doesn't work. Are flash drives always bootable?

  Read the article

• How to fix grub after moving root partition?

  - by Grzenio

  Hi, Because I am using one of the new WD disks I am trying to aling my root partition with the real sectors, as described here: http://community.wdc.com/t5/Desktop/Problem-with-WD-Advanced-Format-drive-in-LINUX-WD15EARS/m-p/10920#M631 So I copied all files to a temp location, deleted my partition (/dev/sda3), recreated it a few cylinders later (same name) and copied the files to the newly created partition. But now when I try to boot, I get my old grub menu but after selecting my kernel version it hangs... Any idea how I can fix it?

  Read the article

• Linux server became extremely slow

  - by Ariel Aharonson

  I have a file sharing website, and my files hosted in a server with those system specifications: 32GB RAM 12x3TB 2x Intel Quad Core E5620 I have files in this server up to 4gb for each file. 446gb is full (/36TB) [root@hosted-by ~]# df -h Filesystem Size Used Avail Use% Mounted on /dev/sda2 50G 2.7G 44G 6% / tmpfs 16G 0 16G 0% /dev/shm /dev/sda1 97M 57M 36M 62% /boot /dev/mapper/VolGroup01-LogVol00 33T 494G 33T 2% /home And take a look at this: Why is the wa% so high? (I think that what makes the server to be so slow)

  Read the article

• How do I remove the option to eject SATA drives from the Windows 7 tray icon?

  - by sblair

  The Safely Remove Hardware icon in Windows 7 offers the ability to eject my SATA drives, including the boot drive. I don't see myself ever needing this - especially not from the convenience of the tray icon. Is there perhaps a common BIOS setting to disable hot-swappability?

  Read the article

• Few questions on restoring an os from an image

  - by user23950

  Is it possible to backup and restore more than 1 partition?For example, I have a multi-boot computer. And I want to backup them all(Windows xp, Windows 7, and Ubuntu) If it is possible, what are the applications that offer this kind of feature? Please give me an idea on how this works. If ever its possible.

  Read the article

• What's a good (preferably standard) was to restore iptables config in ubuntu 9.10

  - by nixomose

  I never quite got why this isn't some built in setup, although maybe it is and stuff changes so quickly I just missed it. I can use iptables-save to generate something I can feed into iptables-restore, but what I was wondering is if there was a standard place to put it so that it gets picked up on boot without me having to add something to rc.local or the ever changing init/event.d scripts.

  Read the article

• multiple problems--windows 7 mbr, others

  - by Andrew

  After buying a new laptop(XPS L501X) with windows 7 preinstalled, I decided to make it dual boot with windows Vista. I now know about the issue with installing previous versions of windows, and the deletion of the MBR. Normally this wouldn't be a problem, but Microsoft no longer sends install disks with their computers, so there is no way to just re-install windows 7. If anyone can help it would be much appreciated. Data preservation is not an issue, as the laptop is new.

  Read the article

• Identify OpenVZ virtual machine from inside

  - by Alfred Godoy

  Is there any way for me to identify which OpenVZ container I am in, from inside the container? I am working on a setup where OpenVZ machines shall boot the same (read-only) disk image, so I can not configure them individually in the file system. I need a unique identification for each of the virtual servers, to be used by scripts running inside the OpenVZ containers. (I'm running Debian Lenny, BTW.)

  Read the article

• Why does my Fedora HD come up as 124GB when it was created to be 700GB in Hyper-V?

  - by barfoon

  Any ideas? How can I tell fedora to use 700GB, and do I have reformat to do this? Filesystem Size Used Avail Use% Mounted on /dev/mapper/vg_computer-lv_root 124G 3.9G 114G 4% / /dev/sda1 194M 23M 162M 12% /boot tmpfs 995M 320K 994M 1% /dev/shm Hyper-V settings: Thank you, pvdisplay -C: PV VG Fmt Attr PSize PFree /dev/sda2 vg_mycomp lvm2 a- 127.29G 0 lvdisplay -C: LV VG Attr LSize Origin Snap% Move Log Copy% Convert lv_root vg_mycomp -wi-ao 125.36G lv_swap vg_mycomp -wi-ao 1.94G vgdisplay -C: VG #PV #LV #SN Attr VSize VFree vg_mycomp 1 2 0 wz--n- 127.29G 0

  Read the article

• What's the best way to move a windows 7 installation from a hdd to another?

  - by Balázs Pozsár

  I have a hdd with windows 7 installed on it. I would like to move (or clone) the whole system to another (in this case smaller) hdd. What is the best and easiest way to do it? Basically I would need some kind of copy operation which would handle the differenct hdd sizes and copy everything including the boot loader. What method do you recommend?

  Read the article

• CPU Test Similar to Memtest?

  - by Nick Whaley

  I need an easy way to do system stability tests. I have come to rely on Prime95 which does a fantastic job of proving stability (or instability) very quickly; but it requires an OS installed. I would like something like Prime95 that stresses both CPU and RAM (maybe PCI-Ex bus also?) but runs in a nice bootable binary like Memtest86+ does, so I can boot it from a thumbdrive. Does such a thing exist?

  Read the article

• How to restore Windows Vista

  - by unknown (google)

  I have a Dell laptop model no latitude D530. After windows update from internet it shows configuration update message and in between it get shut down automaticaly.It fails to boot and Windows is not resumed. What should i do.

  Read the article

• Keep remoting into wrong account. Windows 7

  - by Paul

  I have a home theatre PC running with two users accounts on windows 7. The default account logs into locally. The account 'Paul' is present but is denied local log in so the default auto logs in locally. I am trying to remote into account Paul using RDC however it tries to log into the default account and I am presented with an an option to boot the present user off so I can log in. How do I specify which account I want to log into?

  Read the article

• Why are USB 2.0 devices crashing my system?

  - by BenAlabaster

  Background on the machine I'm having a problem with: The machine was inherited and appears to be circa 2003 (there's a date stamp on the power supply which leads me to this conclusion). I've got it set up as a Skype terminal for my 2 year old to keep in touch with her grandparents and other members of the family - which everyone loves. It has a generic baby-ATX motherboard with no identifying markings. CPU-Z identifies the motherboard model as VT8601 but doesn't provide me with any manufacturer name. There's one stamp on the motherboard that says "Rev.B". On board it has 10/100 LAN, 2 x USB 1.0, VGA, PS/2 for KB and mouse, parallel port, 2 x serial ports, 2 x IDE, 1 x floppy, 2 x SDRAM slots, 1 x CPU housing that is seating a 1.3GHz Intel Celeron CPU, 3 x PCI, 1 x AGP - although you can only use 2 of the PCI slots if you use the AGP slot due to the physical layout of the board. It's got 768Mb PC133 SDRAM - 1 x 512Mb & 1 x 256Mb installed as well as a D-LINK WDA-2320 54G Wi-Fi network card and a generic USB 2.0 expansion board containing 3 x external + 1 x internal USB connectors. All this is sitting in a slimline case. I don't know the wattage of the PSU, but can post this later if this proves to be helpful. The motherboard is running a version of Award BIOS for which I don't have the version number to hand but can again post this later if it would be helpful. It has an 80Gb Western Digital hard drive freshly formatted and built with Windows XP Professional with Service Pack 3 and all current patches. In addition to Windows XP, the only other software it's running is Skype 4.1 (4.2 crashes the machine as soon as it starts up). It's got a Daytek MV150 15" touch screen running through the VGA and COM1 with the most current drivers from the Daytek website and the most current version of ELO-Touchsystems drivers for the touch component. The webcam is a Logitech Webcam C200 with the latest drivers from the Logitech website. The problem If I hook any USB 2.0 devices to this machine, it hangs the whole machine and I have to hard boot it to get it back up. Workarounds found I can plug the same devices into the on board USB 1.0 connectors and everything works fine, albeit at reduced performance. I've tried 3 different kinds of USB thumb drives, 3 different makes/models of webcams and my iPhone all with the same effect. They're recognized and don't hang the machine when I hook them to the USB 1.0 but if I hook them to the USB 2.0 ports, the machine hangs within a couple of seconds of recognizing the devices were connected. Attempted solutions I've tried disabling all the on board devices that I'm not using - such as the on board LAN, the second COM port, the AGP connector etc. through the BIOS in an (perhaps misguided or futile) attempt to reduce the power consumption... I don't think it had any effect but it didn't do any harm. I was wondering if the PSU wattage just isn't enough to drive the USB 2.0 devices; I've seen this suggested but haven't found any confirmation that this could really be an issue - nor have I found a way to work around this issue - if indeed it is one. Any ideas? The only thing I haven't done which I only just thought of while writing this essay is trying the USB 2.0 card in a different PCI slot, or re-ordering the wi-fi and USB cards in the slots... although I'm not sure if this will make any difference. I've installed the USB card in another machine and it works without issue, so it's not a problem with the USB card itself. Other thoughts Perhaps this is an incompatibility between the USB 2.0 card and the BIOS, would re-flashing the BIOS with a newer version help? Do I need to be able to identify the manufacturer of the motherboard in order to be able to find a BIOS edition specific for this motherboard or will any version of Award BIOS function in its place? Question Does anyone have any ideas that could help me get my USB 2.0 devices hooked up to this machine?

  Read the article

• Do hard drive enclosures fail/is it the HDD or enclosure?

  - by x0a

  I'm having a whole host of problems with an external hard drive that was working just fine a couple of hours ago. I've had this problem before once, and that was about 3 months ago, here's what I documented: So a couple of hours ago I turned off all my computers and shut off the power to all my devices in my room, then went and turned the power off at the main switch so I could change an outlet. A couple hours later, after I've already slowly turned everything back on, I go to my xbox to try and watch a movie and it can't seem to list any of the movies I've got. So I go to my desktop to find that my external hard drive isn't there.. even though it's on and connected. It's also stationary and hidden behind something so there's not a whole lot of tampering/physical wear to that external. I plug it into my laptop to try and see what's going on. It starts making this endless loud screeching noise. None of that clicking that's usually associated with hd damage. It's not listed in my computers, and it shows up in Disk Management as "uninitialized" asking me to choose between two different partition types. After carefully disconnecting it and connecting it back, it asks me to format it, which I cancel. I start googling about my issue, starting to accept the situation, torn as hell and helpless and just about ready to toss the thing. Suddenly the screeching stops, after almost 45 minutes of it going, and Disk Management lists the drive as "Online" and "Healthy". Explorer pops up with all my files! I'm still being really careful with it and weary and treating it as though it's in fragile shape. I've downloaded some S.M.A.R.T. software to read the values and everything is listed as "OK" . No reallocated sectors, no read errors, no seek errors. I also ran a quick self-test, which completed without error. Everything seems fine. It looks to be a perfectly healthy external hard drive. So what the hell was that about? Was it doing some sort of maintenance or self-test? How am I supposed to tell the difference? I would've undoubtedly killed the drive for sure if had it gone on a bit longer. I've got the same problem now, with one exception: it doesn't magically reappear after the screeching stops. Occasionally I manage to get some S.M.A.R.T. diagnostics information, which basically reads everything as fine. The only problem is that my HD isn't initializing (so I can't access anything in it). I'm able to successfully run a quick smart test but not an extended one (I've only tried it once but got conflicting indications as to whether it was actually making any progress or not (was stuck on Random read test). So, final question (if all else fails): Could the hard drive enclosure be failing rather than the HDD? Is this a likely possibility at all? How would I know?

  Read the article

• WPF + visual studio 2010 premium - frequent crashes.

  - by Sonic Soul

  using it on 3 different machines, and only my work machine experiences these crashes.. it is running: win 7 Enterprise xeon X5355 2.66Ghz, 2660 Mhz, 4Core, 4Logical 8 gig ram (available phys memory: 3.52 gb) nvidia quardo nvs 285, nvdidia quadro nvs 290 4 monitors visual studio 2010 premium 4.0.30319 RTMRel the crashes usually just make me restart vs, however, on some occasions they freeze the machine completely and require hard boot. not seeing much in event viewer looking for some troubleshooting ideas to narrow this down..

  Read the article

• Lubuntu LiveCD disabling auto-mount.

  - by PxE Booter

  In cooperation with my IT teacher we want to boot all PC's in IT class with Lubuntu. I've successfully set up PXE server, but there is one thing that worries us. Harddrives shouldn't be accessible from booted Lubuntu(normal user only). Would adding to fstab something like: /dev/sda1 /Idk/What auto noauto work? I'd like to add that I can uncompress squashfs livecd filesystem. If no, what other solution is there, to block auto-mounting /dev/sda drive?

  Read the article

• I have 2 identical windows 2008 r2 servers with 32G RAM, one shows "Installed Memory(Ram): 32.0GB" a

  - by c0m4

  the server model: HP Poliant DL160 G5, both servers have identical product ID. for some reason one of the servers have 4GB ram reserved. it shows in the memory tab on the Resource monitor as "Hardware Reserved". I've googled it a bit and found some post related to msconfig boot parameters (but mine are properly set) and some post related to memory remap option in the bios but it is not available in my servers bios so in a bit lost... help?

  Read the article

• How do I convert a Windows 7 Ultimate install to Raid 0?

  - by user16037

  I'm trying to convert my system to RAID 0 and so far I found contrasting opinions on the process. Somebody says Windows 7 can't boot from virtual volumes, somebody says it can. My ideal setup would be two 500gb HD striped in RAID 0 with the OS and software installed on them. Any thoughts?

  Read the article

• Upgrade Ubuntu linux-virtual on EC2

  - by James Ward

  I have an Ubuntu 10.10 EBS boot server on EC2. There are new updates available for it: linux-image-virtual linux-virtual Is it even ok to upgrade those packages on an EC2 server? When I do try to upgrade them I get: The following packages have been kept back: linux-image-virtual linux-virtual Should I do a dist-upgrade or something to force it? Will my instance be able to be rebooted?

  Read the article

• ESX Install........

  - by ov4

  HI all, I recently purchases a bunch of r710 from dell, i installed esx on it. the installation process finished without a problem. however once the esx boot the following error displays at the botton with red letters 00:00:02:21.493 cpu11:4119) mod:2971: Initialization for vmfs2 failed with -1 i installed on two different servers and the same error pops up. the curius thing is that if i install esxi 3.5 or 4 there is not problem help Thanks Oscar

  Read the article

< Previous Page | 321 322 323 324 325 326 327 328 329 330 331 332  | Next Page >