Search Results

Search found 10693 results on 428 pages for 'max requests'.

Page 325/428 | < Previous Page | 321 322 323 324 325 326 327 328 329 330 331 332  | Next Page >

• New to building computers worried about temps

  - by dave

  I'm new to building my own computers and I was wondering about maximum temperatures. I understand that the room temp can affect the computers temp but how relevent is it? I understand that if my room temp is 20°C none of my computer parts could be lower than that. But if my room is 27°C instead of 20°C would this cause my computers parts to heat up more/faster? My new computer I built myself for gaming is i7 2600k 16gb ram ddr3 1600 hd6970 2 gb 240gb ssd ( bought a nas with 3 2tb drives in raid 5 for my home network ) 850w modular psu I also have my old hp computer i3 2120 8gb ram hd6770 1tb hdd I also have 3 laptops in my household, but I am not worried about their temps, they heat up my legs but they are never under stress. Due to size and money reasons I used an old case and it only has one of the sides left on it. Is this bad for the computer and will the extra dust cause problems? Or should I leave it this way or take the missus wrath and buy a case? If so is there any certain case I should get? I don't care about looks I just want card reader and usb slots and for it to run as cool or cooler than now, my case has 1 fan. Also what are the max temps for my new and old computer parts? Is 40°C under load ok for my CPU, what about 70°C for my GPU is that ok too, or should I worry? What are normal and safe temps for my components? I have looked around but there seem to be lots of different answers. I know that 100°C is bad but I want my parts to last as long as possible and this site always seems to give good replies without arguing or flaming.

  Read the article

• Vista Screen resolution Changes when Switching Users

  - by Benjol

  I regularly have a problem when switching between users in Vista - the screen resolution drops down to 800x600. If I try to set the resolution back to the maximum, it says nothing, but just keeps it at 800x600. I can set it back to an intermediate value. Otherwise I have to either restart the PC, or sometimes if I log off one of the users, I can then set the resolution back to max. Might it also have something to do with using sleep mode instead of performing regular shutdowns? I thought it might be related to the desktop background image taking up too much space, but even with plain colours, the problem still occurs. There is an enormous thread on this here, but not really any answers. From what I can gather from that thread, it isn't related to any particular applications, nor limited to a particular make of graphics card or monitor, so I don't think that including hardware details is useful. This is a very annoying problem, as it screws up my desktop and screen layout every single time. Has anyone here experienced this problem or found a solution? I've noticed that Windows Update has tried to install nVidia updates and apparently they've failed on several occasions. Not sure if that is of any relevance or not. UPDATE The last post on the thread: FWIW - I had this problem for about 2 years and wrote a number of posts in this thread in the past. It survived OS reinstallation, change of practically all of my hardware piece by piece (mobo, cpu, monitor, graphics card, memory, power supply...) I used to be affected by this annoying problem at least once every 24-48 hours. About 1.5 months ago I wiped out my 32 bit vista ultimate installation and installed Windows7 ultimate 64 bit from scratch and never saw this problem again. GOOD RIDDANCE. Vista was a pathetic piece of __ that felt like a flashback to the old [horrible] NT4/Windows95 days. I was seriously considering switching over to Apple/Mac OSX if this problem persisted.

  Read the article

• WRT54GL Tomato Router in Client wireless mode to an iPhone Personal Hotspot

  - by Gordo

  I am trying to connect a router with Tomato firmware to an iPhone 4. The goal is to connect to the Personal Hotspot in Client Wireless mode. This should allow wired and wireless users to connect to the router rather then the iPhone. In theory this should be possible but I am having difficulty. Router Linksys WRT54GL Tomato 1.28.1816 firmware iPhone iPhone 4 iOS 5.1 (9B176) Carrier Rogers Wireless Personal Hotspot works with other devices, wifi/bluetooth/usb iPhone Personal Hotspot settings Mode: B/G Security: WPA or WPA2 Personal Encryption: AES Router IP: 172.20.10.1 Subnet: 172.20.10.0 Min IP: 172.20.10.2 Max IP: 172.20.10.14 maximum number of wireless tethered hosts is 5 I have followed the directions here: http://www.wi-fiplanet.com/tutorials/article.php/3810281 Ensured that the router subnet does not 'collide' with the iPhone subnet. Here is the configuration of the Tomato 'Basic - Network - Wireless' section: http://i.stack.imgur.com/pbmTB.png I have tried several variations of this configuration, but nothing seems to work. NOTE: I have successfully connected to my own wifi network in Wireless Client mode, so I am confident that there are no bad cables or other hardware issues. I would prefer to use Tomato, but DD-WRT maybe my only other option. Thanks!

  Read the article

• How do you get AWS VPC EC2 instances to be able to see the AWS APIs?

  - by Peter Mounce

  We're spinning up infrastructure inside of an AWS VPC via CloudFormation. We're using auto-scaling groups to bring up VPC-EC2 instances (so, we don't bring up instances directly; ASGs manage that). Inside of a PVC, EC2 instances only have a private IP; they cannot see the outside world without further work. When these instances spin up, we have some bootstrap tasks that require talking to the various AWS APIs. We also have some ongoing tasks that require AWS API traffic. How are you tackling this apparent chicken-egg problem? We've read about: NAT instances - but don't like this so much because it's another layer to our stack. assigning elastic-IPs to each VPC instance that needs to talk - but a) they all do, and b) since we're using ASGs, we don't know which instances to assign EIPs to at provision-time, and c) we'd need to set up something to monitor those ASGs and assign EIPs when instances are terminated and replaced spinning up an instance (actually, a load-balanced pair, probably spanning AZs) to act as an AWS-API proxy for all API traffic I guess I'm wondering whether there's some kind of back-door we can open that allows our VPC EC2 instances access to the AWS API endpoints, but nothing else, for cheap-complexity setup, that doesn't add another network-hop layer to our infrastructure for serving requests.

  Read the article

• Apache Virtual host (SSL) Doc Root issue

  - by Steve Hamber

  I am having issues with the SSL document root of my vhosts configuration. Http sees to work fine and navigates to the root directory and publishes the page fine - DocumentRoot /var/www/html/websites/ssl.domain.co.uk/ (as specified in my vhost config) However, https seems to be looking for files in the main apache document root found further up the httpd.conf file, and is not being overwritten by the vhost config. (I assume that vhost config does overwrite the default doc root?). DocumentRoot: The directory out of which you will serve your documents. By default, all requests are taken from this directory, but symbolic links and aliases may be used to point to other locations. DocumentRoot "/var/www/html/websites/" Here is my config, I am quite a new Linux guy so any advise is appreciated on why this is happening!? NameVirtualHost *:80 NameVirtualHost *:443 <VirtualHost *:443> ServerAdmin root@localhost DocumentRoot /var/www/html/websites/https_domain.co.uk/ ServerName ssl.domain.co.uk ErrorLog /etc/httpd/logs/ssl.domain.co.uk/ssl.domain.co.uk-error_log CustomLog /etc/httpd/logs/ssl.domain.co.uk/ssl.domain.o.uk-access_log common SSLEngine on SSLOptions +StrictRequire SSLCertificateFile /var/www/ssl/ssl_domain_co_uk.crt SSLCertificateKeyFile /var/www/ssl/domain.co.uk.key SSLCACertificateFile /var/www/ssl/ssl_domain_co_uk.ca-bundle </VirtualHost> <VirtualHost *:80> ServerAdmin root@localhost DocumentRoot /var/www/html/websites/ssl.domain.co.uk/ ServerName ssl.domain.co.uk ErrorLog /etc/httpd/logs/ssl.domain.co.uk/ssl.domain.xo.uk-error_log CustomLog /etc/httpd/logs/ssl.domain.co.uk/ssl.domain.xo.uk-access_log common </VirtualHost>

  Read the article

• OHS 11g R2 - How to restrict access only to Intranet users

  - by Pavan

  For one of the sub-paths, I am trying to restrict access only to Intranet originated requests. I tried following configuration, but it's not working as expected. <VirtualHost *:7777> Debug ON RewriteEngine On RewriteOptions inherit RewriteRule ^/$ /test1 [R,L] RewriteRule ^/test2$ - [R=404] [L] RewriteRule ^/stage$ /stage/test1 [R,L] RewriteRule ^/stage/test2$ - [R=404] [L] <IfModule weblogic_module> WebLogicCluster localhost:7003,localhost:7005 </IfModule> <Location /test1> SetHandler weblogic-handler </Location> <Location /test2> SetHandler weblogic-handler </Location> <Location /api> SetHandler weblogic-handler PathPrepend /test1 </Location> <Directory /stage/test1> Order deny,allow deny from all Allow from 192.168 Allow from 127 </Directory> <Directory /stage/test2> Order deny,allow deny from all Allow from 192.168 Allow from 127 </Directory> <Directory /stage/api> Order deny,allow deny from all Allow from 192.168 Allow from 127 </Directory> <Location /stage/test1> SetHandler weblogic-handler WebLogicCluster localhost:7203,localhost:7205 PathTrim /stage </Location> <Location /stage/test2> SetHandler weblogic-handler WebLogicCluster localhost:7203,localhost:7205 PathTrim /stage </Location> <Location /stage/api> SetHandler weblogic-handler WebLogicCluster localhost:7203,localhost:7205 PathTrim /stage PathPrepend /test1 </Location> </VirtualHost> Can someone please help me resolving this?

  Read the article

• Apache reverse proxy with VirtualHost not serving a page

  - by Mr Aleph

  I have an Apache reverse proxy set to move requests to a Tomcat Applet. The config is similar to: <VirtualHost 100.100.100.100:80> ProxyPass /AppName/App http://1.1.1.1/AppName/App ProxyPassReverse /AppName/App http://1.1.1.1/AppName/App </VirtualHost> I also have a page called summary.html that exists on 1.1.1.1 as: http://1.1.1.1/AppName/summary.html When I browse directly to it I have no problem viewing it, however if I try to get there via the reverse proxy I get a blank page. Wireshark shows me a 503, but this one is coming from the Apache reverse proxy (IP 100.100.100.100) and not the Tomcat (IP 1.1.1.1). Should I add http://1.1.1.1/AppName/ to the config? How? I tried it but I get a blank page, however this one shows on the URL bar of the browser the internal IP of the Tomcat, so, no go. Help is appreciated. Thanks. EDIT: This is the dump from Wireshark: GET /AppName/ HTTP/1.1 Host: 100.100.100.100 User-Agent: Mozilla/5.0 (Macintosh; Intel Mac OS X 10_6_8) AppleWebKit/534.52.7 (KHTML, like Gecko) Version/5.1.2 Safari/534.52.7 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Cache-Control: max-age=0 Accept-Language: en-us Accept-Encoding: gzip, deflate Connection: keep-alive HTTP/1.1 404 Not Found Date: Tue, 30 Jan 2012 09:08:51 GMT Server: Apache Content-Length: 1 Connection: close Content-Type: text/html; charset=iso-8859-1

  Read the article

• Comprehensive solution for managing patches, event viewing, change management, inventory, etc

  - by Holocryptic

  I'm looking for a solution that incorporates most or all of the following: Patch Management, Server event viewing/tracking, AD change management, ticketing and internal/external kb, remote access - ability to shadow user sessions or create new ones, imaging, and inventory. Our environments contains Windows Servers and ESXi Hosts (We're not completely virtual, but we're moving that direction). Various Cisco and Linksys switches and firewalls. This is a tall order, and I don't know if it can be done on a reasonable budget. I've looked and found some questions on SF that deal with some of this: http://serverfault.com/questions/72015/active-directory-management-tools-for-medium-sized-forest-less-than-1000-users http://serverfault.com/questions/4021/are-there-any-tools-to-do-change-management-with-active-directory-group-policy http://serverfault.com/questions/21752/what-is-a-good-patch-update-management-server What I'm ideally looking for is a reasonably cheap solution that integrates the features into a central interface. We're a non-profit, so money is a limiting factor (the cheaper, the better; but we have a max of $15k). What we are trying to avoid is having to deal with multiple vendors, while maintaining scalability (we're creating more sites that we'll have to manage). Is this possible, or will we have to cobble together something to make it work for us?

  Read the article

• Why does my DD-WRT not accept SSH connections from my laptop?

  - by Vlad Seghete

  So, here is my system: I have a 2Wire AT&T modem/router which I use for wireless and a Buffalo router flashed with DD-WRT which is physically attached to the 2Wire and set in the DMZ. I set everything up on the DD-WRT to be able to connect to it using ssh and also so that it forwards ssh requests on a different port to one of the servers behind it. Now, when I am physically connected to the DD-WRT all this works great and as I would want it to. I ssh into the two different ports using the WAN IP of my network, and I get where I expect to land. If, however, I am connected using wi-fi to the 2Wire, the same commands do not work. I do not get an error, simply a timeout. I have trouble understanding this, since the DD-WRT is set in the DMZ and everything should pass to it. To further complicate the problem, I tried connecting to the same IP using my phone (wireless disabled, so really from the WAN) and surprise, it works! If I go back on the local network by enabling the wifi, the ssh connection times out. To make this even stranger, my WAN IP address always responds to pings (meaning in all the above situations). What could be going on here? I know what I should do, completely disable the 2wire as a router and use it strictly as a modem and them use all the routing capabilities of the dd-wrt. It's what I will probably end up doing anyway, but my question remains, because I really want to know what is happening here.

  Read the article

• Using URL rewrite module for http to https redirect

  - by johnnyb10

  Following ruslany's suggestion on the URL Rewrite Tips page here, I'm trying to use URL Rewrite to redirect http:// requests for my site to https://. I've written and tested the rule using a test site I set up, and so now the final piece is to create a second site (http) to redirect to my https site. (I need to use a second site because I don't want to uncheck the "Require SSL encryption" checkbox on my existing site.) I'm an IIS newbie so my question is: how do I do this? Should I create a site with the same name and host header, only it will be bound to http? Will IIS let me create a site with the same name? I don't want to screw anything up with my existing site (which is a SharePoint site, currently used by external users). That site currently has http and https bound to it. So my assumption is that, using ISS (not SharePoint), I will create a new site (http only) with the same name and host header as my existing site, and add the URL Rewrite rule to the http site. And then I guess I should remove the http binding from my existing site? Does that seem correct? Any advice, gotchas, etc., would be appreciated. Thanks.

  Read the article

• Website hosting from home - IIS6

  - by Paul

  I'm wanting to host a few websites from home, primarily because I'm using some BETA Microsoft software (.NET 4 and EF) and don't want to install it on my production server which is hosted at eukhost.com. Basically, I'm completely new to this sort of thing. So far, here is what I've done: Registered the domain name at namecheap.com (let's call it mydomain.com) Gone to "Nameserver Registration" in the panel and entered my IP address for the NS1 and NS2 records (let's say the IP is 0.0.0.0). Gone to "Domain Name Server Setup" and entered ns1.mydomain.com & ns2.mydomain.com Forwarded requests from port 80 to my internal IP (let's say 192.168.1.254) Created the website in IIS (I'm just testing with a single website so far, so have not created any host header values) Now, if I type in the IP address (http://0.0.0.0) I get the site as expected. However, if I enter http://www.mydomain.com I get an error saying "DNS Error - Cannot find server". I'm aware that there is a service from DynDNS that will automatically change the IP if I have a dynamic address, however my IP has remained static since I installed the ISP (since October) so I don't need this. Is there any way that I can get the DNS to work just by configuring IIS or something in Windows? I don't really want to have to pay for any 3rd party service. Thanks,

  Read the article

• Windows 7 notebook turn off by itself, how to check if it is due to CPU being too hot?

  - by Jian Lin

  I have a Dell Studio 15 notebook, and it just started turning off by itself yesterday. Could it be that the CPU is too hot? I have had several notebooks before and every one of them I can put them on the bed without any problem. This Dell Studio Notebook, however, seems like have the air / fan outlet pointed outward from the bottom back of the notebook, so I suspect that the air is partially blocked when it is on the bed. Are there Win 7 tools that can monitor the CPU temperature, or will some 3rd party tool be needed? (I try to stick to official tools nowadays). Also, it is running Win 7 Ulitmate, there is actually no utility or background service from Win 7 or from Dell that detects when the temperature is too hot (or 95% near the max), pop out a message box giving a warning and say that the computer will go into sleep mode in 1 minute, but instead just turn off the computer by brute force (cutting out the power) right then and there? Update: it turned off right in front of my eyes -- it is not doing any windows update or anything. just normal use and jooooop, it turned off.

  Read the article

• Why does my Intel Tolapai network chip not transmit packets?

  - by Hanno Fietz

  I'm trying to deploy an embedded system (NISE 110 by Nexcom) based on the Intel EP80579 (Tolapai) chip. Tolapai apparently integrates controllers for Ethernet etc. on a single chip (Intel homepage). The machine can't get a network connection. Diagnosis as far as I could manage: Drivers drivers from Intel compiled and installed without problems (version 1.0.3-144). Kernel version and Linux distribution (CentOS 5.2, 2.6.18) match the driver's installation instructions. drivers are loaded and show up in lsmod (module names are gcu and iegbe) interfaces eth0 and eth1 show up in ifconfig ifconfig I can bring up the interfaces with fixed IP pinging the interface locally works ifconfig shows flag UP but not RUNNING Link ethtool shows "Link detected: no", "Speed: unknown (65536)" and "Duplex: unknown (255)" Link LED is on on the other side of the cable, ethtool shows "Link detected: yes" and reports a speed of 1000 Mbps, which has allegedly been auto-neogotiated with the problematic device. Network traffic analysis the device does not reply on ARP, ICMP echo or anything else (iptables is down) when trying to send ICMP or DHCP requests, they never reach the other end activity LED is off on the device, on at the other end. I tried the following without any effect: Different cables (2 straight, one crossed), I get the link LED lit up on each. Three different devices on the other end (one PC, one netbook, one router) Fixed ARP table entries on both sides Connecting both network ports of the machine with each other, won't ping through the cable, but will ping locally. Tried straight and crossed cables for that.

  Read the article

• nginx- Rewrite URL with Trailing Slash

  - by Bryan

  I have a specialized set of rewrite rules to accommodate a mutli site cms setup. I am trying to have nginx force a trailing slash on the request URL. I would like it to redirect requests for domain.com/some-random-article to domain.com/some-random-article/ I know there are semantic considerations with this, but I would like to do it for SEO purposes. Here is my current server config. server { listen 80; server_name domain.com mirror.domain.com; root /rails_apps/master/public; passenger_enabled on; # Redirect from www to non-www if ($host = 'domain.com' ) { rewrite ^/(.*)$ http://www.domain.com/$1 permanent; } location /assets/ { expires 1y; rewrite ^/assets/(.*)$ /assets/$http_host/$1 break; } # / -> index.html if (-f $document_root/cache/$host$uri/index.html) { rewrite (.*) /cache/$host$1/index.html break; } # /about -> /about.html if (-f $document_root/cache/$host$uri.html) { rewrite (.*) /cache/$host$1.html break; } # other files if (-f $document_root/cache/$host$uri) { rewrite (.*) /cache/$host$1 break; } } How would I modify this to add the trailing slash? I would assume there has to be a check for the slash so that you don't end up with domain.com/some-random-article//

  Read the article

• Monitoring AWS Systems Behind ElasticBeanStalk

  - by A. Avadis

  So I'm getting a company set up in the Amazon Cloud -- creating IAAS protocol/solutions/standardized implementation, etc while also being the SysAdmin for individual systems, app environments, and day-to-day uptime. One of the biggest issues I'm having is tracking various system/application logs, as well as logging/monitoring/archiving system metrics like memory usage, cpu usage, etc etc In a centralized fashion. E.g. -- Nagios + Urchin. The BIGGEST impediment to my endeavors is the following: The company application is deployed in the form of a Java *.WAR file, uploaded to an Elastic BeanStalk application environment, load balancing and auto-scaling between 3(min) and 10(max) servers, and the EC2's that run the application are fired up and disposed of ad-hoc. That is to say, I can't monitor the individual EC2's for very long because so many are being terminated then auto-provisioned/auto-scaled on the fly -- so I'd constantly be having to "monitor what I'm monitoring", and continuously remove/add EC2 machine addresses to my monitoring lists. IS there some sort of way to use monitoring tools like Zabbix or Nagios to monitor the ElasticBeanStalk, and have it automatically add on new EC2's, and remove terminated/failed EC2's from its monitoring list automatically? Furthermore, is there anything I can do with GrayLog to achieve similar results with the aggregation/centralization of my application logs from multiple EC2 instances into ONE consolidated set of logs/events? If not GrayLog, is there ANYTHING LIKE GrayLog that can automatically detect what EC2 members are being added/removed from the environment, and collect the logs from them automatically? Any and all advice or direction is appreciated. Thanks much, and cheers!!

  Read the article

• Configure samba server for Unix group

  - by Bird Jaguar IV

  I'm trying to set up a samba server with access for users in the Linux (RHEL 6) "wheel" group. I am basing smb.conf off of the example here where it goes through the [accounting] example. In my smb.conf I have [tmp] comment = temporary files path = /var/share valid users = @wheel read only = No create mask = 0664 directory mask = 02777 max connections = 0 (rest of the output from $ testparm /etc/samba/smb.conf is here). And groups `whoami` returns user01 : wheel. When I use the following command from another machine (Mac OS) as the Linux user (user01): $ smbclient -L NETBIOSNAME/tmp it asks for a password, I hit return without a password, and get: Enter user01's password: Anonymous login successful Domain=[DOMAIN] OS=[Unix] Server=[Samba 3.6.9-151.el6_4.1] Sharename Type Comment --------- ---- ------- tmp Disk temporary files IPC$ IPC IPC Service (Samba Server Version 3.6.9-151.el6_4.1) But when I try $ smbclient //NETBIOSNAME/tmp I try entering the password I use for the Linux login, and get a bunch of stuff logged, including check_sam_security: Couldn't find user 'user01' in passdb. ... session setup failed: NT_STATUS_LOGON_FAILURE (I can give more logging information if it would be helpful.) I can't find a reference to more steps I need to add group users in the resource. Should I be manually adding samba users from the group somehow? Thank you

  Read the article

• How should I perform database maintenance on a 24x7 system

  - by solublefish

  I'm a software developer who inherited a part-time DBA role. I'm responsible for an application backed by a small, high-volume 24x7 database on SQL Server 2008. While there's other stuff in the DB, the critical piece is a 50GB, 7.5M row table that serves 100K requests/sec during peak load, and about half that at "night". This is 99%+ read traffic, but the writes are constant, and required. I need to be able to perform periodic maintenance without a maintenance window. Say an index rebuild, a job to purge old data, Windows Update, or hardware upgrade. Most of the advice I've seen is along the lines of "MAKE a maintenance window." While I appreciate the sentiment, I hope there's another way. If it will solve this problem, I do have the ability to purchase new hardware or modify the database, the clients (a set of web services servers), and much of the application code (ADO.NET + ASP.NET). I've been thinking along the lines of using the warm spare (or a 3rd server) to do the maintenance, and then "swap" it into production. 1 Synchronize the spare by restoring backups, including a current transaction log. 2 Perform the maintenance tasks. 3 Reconfigure clients to connect to the spare server. Existing connections are finished within a minute or so. 4 The spare server is now the production server. The problem remaining is that the new production server is now out of date by however long it took to perform maintenance. Is there some way that the original production server can be made to queue up changes and merge them to the spare between steps 2 and 3? Any other ideas?

  Read the article

• What performance degradation to expect with Nginx over raw Gunicorn+Gevent?

  - by bouke

  I'm trying to get a very high performing webserver setup for handling long-polling, websockets etc. I have a VM running (Rackspace) with 1GB RAM / 4 cores. I've setup a very simple gunicorn 'hello world' application with (async) gevent workers. In front of gunicorn, I put Nginx with a simple proxy to Gunicorn. Using ab, Gunicorn spits out 7700 requests/sec, where Nginx only does a 5000 request/sec. Is such a performance degradation expected? Hello world: #!/usr/bin/env python def application(environ, start_response): start_response("200 OK", [("Content-type", "text/plain")]) return [ "Hello World!" ] Gunicorn: gunicorn -w8 -k gevent --keep-alive 60 application:application Nginx (stripped): user www-data; worker_processes 4; pid /var/run/nginx.pid; events { worker_connections 768; } http { sendfile on; tcp_nopush on; tcp_nodelay on; keepalive_timeout 65; types_hash_max_size 2048; upstream app_server { server 127.0.0.1:8000 fail_timeout=0; } server { listen 8080 default; keepalive_timeout 5; root /home/app/app/static; location / { proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_redirect off; proxy_pass http://app_server; } } } Benchmark: (results: nginx TCP, nginx UNIX, gunicorn) ab -c 32 -n 12000 -k http://localhost:[8000|8080]/ Running gunicorn over a unix socket gives somewhat higher throughput (5500 r/s), but it still does't match raw gunicorn's performance.

  Read the article

• What does "incoming" and "outgoing" traffic mean?

  - by mgibsonbr

  I've seen many resources explaining how to set up a server's firewall to allow incoming and outgoing traffic on HTTP standard ports (80 and 443), but I can't figure out why I would need either of them. Do I need to unblock both for a "regular" web site to work? For file uploads to work? Are there situations where it would be advisable to unblock one and leave the other blocked? Sorry if that's a basic question, but I couldn't find it explained anywhere (also I'm not a native english speaker). I know in a "regular" web site the client is always the one who initiates a request, so I'm assuming a web server must accept incoming traffic on those ports, and my common sense tells me the server is allowed to send a response without unblocking anything else (otherwise it wouldn't make sense to have two types of rules). Is that correct? But what is an outgoing web (service) traffic, and what would be its use? AFAIK if the server wanted to initiate a connection with another machine, the specific port that matters is the one in the other end (i.e. the destination port would be 80), on its end any free port could be used (the source port would be random). I can open HTTP requests from my server (using wget for instance) without unblocking anything. So I'm assuming my concepts of "incoming" and "outgoing" are wrong somehow.

  Read the article

• Using URL rewrite module for http to https redirect

  - by johnnyb10

  Following ruslany's suggestion on the URL Rewrite Tips page here, I'm trying to use URL Rewrite to redirect http:// requests for my site to https://. I've written and tested the rule using a test site I set up, and so now the final piece is to create a second site (http) to redirect to my https site. (I need to use a second site because I don't want to uncheck the "Require SSL encryption" checkbox on my existing site.) I'm an IIS newbie so my question is: how do I do this? Should I create a site with the same name and host header, only it will be bound to http? Will IIS let me create a site with the same name? I don't want to screw anything up with my existing site (which is a SharePoint site, currently used by external users). That site currently has http and https bound to it. So my assumption is that, using ISS (not SharePoint), I will create a new site (http only) with the same name and host header as my existing site, and add the URL Rewrite rule to the http site. And then I guess I should remove the http binding from my existing site? Does that seem correct? Any advice, gotchas, etc., would be appreciated. Thanks.

  Read the article

• Attaching 3.5" desktop drive to MacBook SATA

  - by Kyle Cronin

  I have a mid-2007 MacBook that, according to the Apple Store, has suffered some liquid damage and requires a new logic board to operate correctly, a ~$750 repair I've been told (would normally be around ~$300 were it not for the "liquid damage"). The unit itself works fine - the only problem I've been having is that the system does not recognize the battery and will not charge it. Curiously, the system can still be powered by the battery and even recognizes when the power cord is detached by diming the backlight, but I digress. Now that this laptop will likely become a desktop, I'm wondering if it might be possible to attach a desktop drive. I recently purchased a 2TB SATA drive and I'm wondering if it's possible to somehow attach it where the current internal drive connects. Obviously the drive itself will not fit inside the device, but as the unit will spend the rest of its days on my desk, that's not really much of an issue. My main questions are: Is this possible? If so, how would I connect the drive? Would a SATA extender cable work? Is the SATA port on my MacBook capable of powering a desktop drive? Or should I just get a SATA male-to-female cable and see if I can power the drive through other means (a cheap power supply, for example) The disk I'm referring to is the Hitachi Deskstar HD32000. Though I couldn't find that exact model on Hitachi's support site, these are the power requirements for a similar drive, the 7K2000 (2TB, 7200RPM, SATA II): Power Requirement +5 VDC (+/-5%) +12 VDC (+/-10%) Startup current (A, max.) 1.2 (+5V), 2.0 (+12V) Idle (W) 7.5 From what I've read, 2.5" drives require 5V, meaning that my MacBook obviously is capable of producing it. The specs seem to suggest that this drive seems capable of accepting it instead of the typical 12V - is this an accurate interpretation of the power requirements? Or does it need both 12V and 5V?

  Read the article

• mod rewrite works fine apart from for missing directory index files

  - by j w

  I have a legacy web site hosted on Apache. It has a number of web pages sitting in the public web root and its subfolders. publicDocs/ directorywith_no_defaultfile/ some-legacy-flat-page.htm .htaccess index.php some-legacy-flat-page.htm I would like to start using Zend MVC for some of the newer pages. I have got a .htaccess mod rewrite rule working so that any request for a non-existent file is sent to be handled by the MVC bootstrap file (/index.php). With my current set-up, the following types of requests are routed to '/index.php', the MVC bootstrap: /index.php /blah /directorywith_no_defaultfile/bloo The following types of request are served by old legacy (flat) pages /some-legacy-flat-page.htm /directorywith_no_defaultfile/some-legacy-flat-page.htm But, when I a request a non-existent file that is a directory like these: /directorywith_no_defaultfile or /directorywith_no_defaultfile/ I get an error: Forbidden You don't have permission to access /directorywith_no_defaultfile/ on this server. Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request. I suspect this may have something to do with the way Apache handles default files. Do you know which Apache directives could be causing this?

  Read the article

• Important hardware components to avoid bottlenecks/improve speed on a laptop?

  - by joelhaus

  Looking for a powerful general use (including web development) laptop running Windows. Price points seem to be all over the place. Many less powerful machines are priced much higher than machines with better specs. How does one navigate this market? Are there any unpublished/under-publicized specs/bottlenecks you look for? Understanding that hardware improves over time, is there an efficient ratio that can be used (or something similar, like Windows Experience Index?) which will indicate how powerful a system is? Thanks in advance! P.S. Here is an example from a laptop released on September 17, 2010. Can anyone pick apart these specs? Is there missing information you would be looking for? OS: Win 7 Display: 16.4" LED backlit Processor: Intel Core i7-740QM, 6MB L3 Cache RAM: 6GB DDR3 1333MHz (8GB max.) Graphics: NVIDIA GeForce GT 425M (1 GB of dedicated DDR3) HDD: 500GB 7200RPM SATA Hard Drive Removable Disc: Blue-ray with DVD±R/RW Misc: webcam/mic/speakers/bluetooth (via Sony Vaio VPC-F137FX/B)

  Read the article

• UPS power requirements for server

  - by captainentropy

  Greetings! So, I just placed an order for a new server. The company recommended that I get a 3000W UPS. (!) As best as I could I calculated the following wattage consumption based on benchmarked data or datasheets provided by the manufacturers of each component: number watts **total watts** MoBo 1 240 240 CPUs (E5540) 2 80 160 RAID cards (3ware) 2 18 36 RAM (6x4GB) 6 3 18 DVD drive 1 7 7 floppy 1 2 2 RE4 drives 8 7 56 WD20 drives 8 6 48 Intel X25 SSD 2 0.15 0.3 total = 567 So that is for the PSU requirements only. The PSUs in the machine are a 720W for the master node and 800W each for two subsystems. That's a total of 2320W that can be delivered by these PSUs. But that is 4X the amount being consumed, at most, by the components. I didn't count case fans or the eSATA card (3W maybe?) or what the PSUs themselves require but assuming I double or triple my calculations I'm not even remotely close to the 3000W UPS I was suggested to get. They run at least $1100. I could get a 2000W for about $750 or a 1500W for $450 and still be well over my estimated power need. I don't think I need a whole lot of run time in the case of a power outage, maybe 20 minutes max, enough time to shutdown if the power doesn't come on within 5-10 minutes. Any thoughts? Am I off on my calculations? Did I overlook something major? If so what are your suggestions for a UPS? Thanks!

  Read the article

• Two different subwoofers aren't working on my machine or my phone

  - by Philluminati

  I have speakers that come with my computer. Two small desktop speakers and a subwoofer with a base volume control on the back. It's worked for years. I was listening to Spotify on my speakers as loud they would possibly go and with the base turned up to max and suddenly the subwoofer stopped working. I've plugged the speakers into my Android HTC Desire Z handset and again, the desktop speakers play music but the subwoofer doesn't (even after fiddling with the volume control). So I figured I'd broken it. I went to Amazon and bought a replacement one. I bought this one: http://www.amazon.co.uk/dp/B002N46YD8/ref=pe_217191_31005151_dp_1 but it doesn't work either, on either my desktop nor my Android phone. I had a play with alsamixer and the LFE and center controls are switched on and the speakers are okay... but still no base. Am I unlucky enough to bought a new subwoofer which is already broken out of the box or is there something else which is wrong and I could look into please? Are there any other tests which I could perform to see if the problem is me or not?

  Read the article

< Previous Page | 321 322 323 324 325 326 327 328 329 330 331 332  | Next Page >