Search Results

Search found 11009 results on 441 pages for 'third party integration'.

Page 327/441 | < Previous Page | 323 324 325 326 327 328 329 330 331 332 333 334  | Next Page >

  • Joining two routers together, but I have no access to the second router, although I know it's IP address and Gateway

    - by JohnnyVegas
    I have temporarily moved into a rented apartment for 4 months, which has wireless. The trouble I am having is that the access points here are wifi only and no RJ45 and I need to use RJ45 to connect some equipment that I am working with. I have purchased an RT-N66U and installed Tomato (shibby ver. 1.28) and successfully replaced the existing access point, but now I want to enable the access point that I have replaced as it links wirelessly to 3 others. Can I plug in a cable from the access point to my RT-N66U and get it to access the internet via my router? I have no access to the existing wireless access point, and don't want to reset it as it's not mine. There is another router situated in the roof somewhere which I also have no access to, but it's supplying my RT-N66U internet and I most definitely have a double-nat, which although isn't the best way of doing things I am limited with what I can do. Any suggestions on routing tables, vlans etc would be helpful, but I have no experience in these fields before - but I know the tomato firmware can cater for this. My router is set to IP 10.0.1.1 and dhcp is 10.0.1.100-200 The wireless access point address was 192.168.1.2 but this was assigned by the router in the roof which has the address 192.168.1.1. There is a cable from this router going to a wall socket which I now have my RT-N66u attached to via the WAN port. I understand it's scruffy and it isn't the way to do things but I have tried to ask for the admin details but as the wireless network is looked after by a third party and nobody knows their details I am stuck with this dilemma. I could buy three wireless access points and replace the existing but this isn't what I want to do, and although I have installed plenty of DD-WRT wireless repeater bridges they simply don't work here for some unknown reason. The phone line here is very noisy too and I don't have the rights to install ADSL in a building that isn't mine, and 3G coverage isn't good enough either. Thanks for your time

    Read the article

  • Apache+PHP on Windows Server 2008

    - by Álvaro G. Vicario
    I've installed Apache/2.2 and PHP/5.3 lots of times under Windows XP, Windows Vista and Windows Server 2003. The official *.msi installers work fine and configure everything. Now I need to install them into a Windows Server 2008 R2 Standard 64-bit box and I'm facing nothing but problems: There are no official 64 bit binaries for Apache and no binaries at all for PHP (official or third-party). It's alright, I'll do with good 32 bits, but it's kind of surprising. Official documentation is vague, generic and completely unaware of UAC or any recent Windows security feature. The PHP installer is unable to configure mod_php and the Apache installer is unable to configure... well, Apache. After three hours I've finally reached the point where I'm installing everything in the root folder and assigning full control access to all users in all files and directories and all I've got is a PHP-less Apache server that's able to serve static pages. So I guess it's time to stop and think. My question is: Has anyone installed an Apache+PHP production server under Windows Server 2008 in a serious, secure and reliable way and documented the whole process? Or should I just find a bundle like XAMPP and the like that requires no installation? === EDIT === I've installed Xampp Lite 1.7.3 and everything was working in 5 minutes. I'd still like to find some documentation about installing the original packages: XAMPP installs tons of stuff I don't need and offers no tool to enable and disable PHP extensions.

    Read the article

  • Terminal server performance over high latency links

    - by holz
    Our datacenter and head office is currently in Brisbane, Australia, and we have a branch office in the UK. We have a private WAN with a 768k link to our UK office and the latency is at about 350ms. The terminal server performance is reeeeealy bad. Applications that don't have too much animation or any images seem to be okay. But as soon as they do, the session is almost unusable. Powerpoint and internet explorer are good examples of apps that make it run slow. And if there is an image in your email signature, outlook will hang for about 10 seconds each time a new line is inserted, while the image gets moved down a few pixels. We are currently running server 2003. I have tried Server 2008 R2 RDS, and also a third party solution called Blaze by a company called Ericom, but it is still not too much better. We currently have a 5 levels dynamic class of service with the priority in the following order. VoIP Video Terminal Services Printing Everything else When testing the terminal server performance, the link monitored using net-flows, and have plenty we of bandwidth available, so I believe that it is a latency issue rather than bandwidth. Is there anything that can be done to improve performance. Would citrix help at all?

    Read the article

  • Options for synchronizing Palm Desktop calendars

    - by Al Everett
    My wife and I each have Palm Centro phones and very full calendars. We've been using Palm products for years and are happy with them and are not looking to switch (and don't have the budget for it even if we wanted to). What is a viable way we can synchronize our calendars? Back when we had Palm Z22s we used AirSet. It worked great in synchronizing our desktop calendars. Unfortunately, their sync software does not support Palm Desktop v6 and there is nothing in the pipeline to support it. (The third party vendor is apparently not interested in updating for the newer Palm desktop.) I would love to be able to get back to having each other's appointments appear on the other's calendar. What can we do? Some limitations: A data plan is not an option (so this precludes over-the-air synchronization options) No Microsoft Outlook Edit: Syncing my Palm to my Palm Desktop is not the issue. Being able to sync, in some way, the Palm calendar databases of my wife's and my calendars is what's desired.

    Read the article

  • Sort order in Windows Explorer

    - by Haim H.
    The behaviour described below occurs on Windows-7 systems and on Windows XP. We operate in a dual-language environment - English and Hebrew. When in Windows Explorer we sort files by name, the order in which they are listed is not what we would expect. Here is a list of file names as sorted by Windows Explorer (all of the files have a .pdf suffix): 1G110033H-PP 19C050G-PP-ORB 19C050H-PPRM 19C100H-PPRM 19C-MBPS-PP 19C-MBPS-PP-1 29AAC050-PP 29AAC100-PP 29AAC100-PPUL 29B004064-PP 101AC050-PP 101AC100-PP 101B100-PPE 1091003G-PPFSUL 10108033G-PPSA 10125033H-PPM It looks to me that first the items are sorted according to the position of the first alphabetic character in the name, and then, within those groups, they are sorted in "normal" alpha-numeric order. That is, all the files with an alpha character in the first position are on top of the list, followed by those with the first alpha character in the second position, followed by those with the first alpha character in the third position, and so on. An alternate way of looking at this is that, in a file name composed of numbers and letters, the sort treats the first group of numbers in the name as the major sort node, with the rest of the name being the secondary sort node. Now that I understand the sequencing logic, it's not a big problem, but I was wondering why this happens?

    Read the article

  • How to monitor process hogging CPU on a remote server

    - by sergeb
    I have a remotely hosted (virtual, VMware) dedicated server (Windows 2008 Server Web edition w/ SP1) that I can only connect to over Remote Desktop. Lately, a process hogs CPU for ~40 minutes most every day (at a random hour) and brings all web sites on the server down. While this is going on I also cannot connect using Remote Desktop to investigate on what is that process... Promptly after 40 min I can RD and the first thing I see on the Perf Monitor is that there was something topping the CPU at 100% and stops just before I'm able to RD... I'm aware of the beginning and end of this for I have monitors setup that email me up/down status of the web sites but I'm locked out while this is happening - can't RD to the server until it's over (and too late to see the Task Manager/Process Explorer picture). What is the best way/tool to setup on the server to continuously monitor all processes so when this happens I login and "replay" it to find the process causing this trouble? (I have no control over the virtual/VMware setup for it is hosted by a 3rd-party but I have most full control over my dedicated machine) Thanks in advance!

    Read the article

  • LAN->LAN IP translation (for TortoiseSVN + Artifacts + Buffalo router)

    - by Armchair Bronco
    Here's my scenario: I've got a VisualSVN server on my main dev box @ home. I'm also using Visual Studio 2010, TortoiseSVN, VisualSVN client (for source control), and Versioned 'Artifacts' (for bug tracking). (I had to modify the fake URL's below to use only one slash because as a new user, I can't post more than one real URL.) I've got my Buffalo AirStation WHR-HP-G300N router properly configured so my business partner can connect to the SVN server. I have port forwarding enabled for the internet-side IP address (like http:/99.888.77.66:443) which gets forwarded to an internal IP (like 192.168.11.6). This part is working great. The problem I'm having is with the integration piece between TortoiseSVN and my bug tracking system. I need to provide a bugtraq:url property, but I haven't been able to get relative paths to work. So I'm forced to use an absolute URL. On my end, I need to use the name of my server (for example: bugtraq:url = https:/my-server/svn/bla..), but this doesn't work for my partner. He needs to specify the IP address (for example: bugtraq:url = https:/999.888.77.66:443/svn/bla...) Is there a way to configure my router such that the IP address for this parameter gets re-routed/re-mapped to "https://my-server" if the request originates from the LAN itself? My router's software supports LAN-Internet and Internet-LAN, but I don't see LAN-LAN.

    Read the article

  • Computer loses all installed programs and appears to return OS-only state

    - by Jake
    This is a story regarding 3 laptops of different brand and models. On separate occassions, I configured each of these Windows 7 / Vista computers with the necessary configuration and applications (which are supposedly the same actually), e.g. join office domain, same windows updates, microft office etc. These machinese were configure in our office in Singapore, and then they were taken to India for use. Someday in India, when booting up the laptop, all went fine except when it reach the log in screen, it was no longer possible to login with domain credentials. Logging into the laptop local admin account will lead to discover that the machine has returned to "OS-only state". All the configurations and applications were gone. The actual user profiles are still in the C: drive so files can still be retrieved, but under Control Panel Uninstall Programs it is evident that at least the registry is corrupted. The above scenario happen to the first 2 laptops. For the third, the system reports "Operating System Not Found" on boot up. I cannot think of any reason except to suspect a power fluctuation issue. Question is, will a power issue create this behaviour? What else can cause this issue?

    Read the article

  • Centralized Windows/Mac Patch Management that is easy to use

    - by BiggsTRC
    I'm looking for advice on what patch management solutions you would recommend based upon your experience. I'm also looking for which ones you would not recommend based upon your experience. We have a mixed network of Windows and Mac clients. Our central servers are all Windows servers, although I have considered putting in a Mac server to better handle our Mac clients. The issue we are facing currently is that we need to maintain the patches on all of our third-party applications. Right now we use WSUS, which handles with patching of Windows and some Microsoft products but that is about it. I need something to cover the other applications, specifically things like Adobe products (Reader, Flash, Dreamweaver, etc.) Our network isn't that big (maybe 200 clients) and I don't have a person to dedicate just to patching and maintaining a patch management solution. Thus very large and complicated solutions like System Center are most likely out. I have recently been looking at Dell's Kace K1000 solution (http://www.kace.com/products/systems-management-appliance/). It seems simple and it provides a lot of tools in one package that I would like/need as well. I like the fact that it is self-contained in an appliance and that it is designed for solutions like mine. However, I'm not sure if this is the best solution. I've also looked some at Shavlik's Netchk solution (http://www.shavlik.com/netchk-protect.aspx) but I don't need an anti-virus product. However, it looks like they might have a very good patch database. My question is this: What are your thoughts on these to products? Are there better products out there? Are there issues that I'm not considering? I want something that is very good at patching a broad range of products, that is simple to use, that takes a minimal amount of management (like WSUS), and that (hopefully) works with Mac and Windows.

    Read the article

  • Good PC-based video conference control tools?

    - by Jeremy Wadhams
    I'm looking to improve the user experience in our video conference rooms, by simplifying the things users do all the time (setting up a call, muting and unmuting, panning and zooming between a few room-appropriate presets) and totally taking away the functions that we don't use or that are more likely to ruin the experience (changing the brightness of the TV, using the VNC presenter mode). The rooms each have Tandberg Edge or MXP video units, I'm not looking at PC-based solutions like Skype or iChat. The classic way to do this would be to plunk down huge money for an AMX or Crestron panel. This does have some advantages, and I am considering that approach, but in my initial investigation, that looks expensive, inflexible, and proprietary. On the other hand, the Tandberg video units I'm looking to control are very thorough XML API (PDF), so some of the integration magic that Crestron and AMX consider to be a value add, I could reproduce at mashup speeds. Anyone aware of an Open Source or Commercial product that takes advantage of the readily available web APIs, some simple touch screen PCs, and builds a product that is more like skinning an AJAX web app, and ideally more cost effective than the proprietary panels?

    Read the article

  • Windows roaming profile when creating a new user profile

    - by molecule
    Hi all, When a particular user is having a lot of problems with Windows XP e.g. applications crashing, unresponsive applications (which used to work), and as a general troubleshooting practice for a domain user, I normally rename that user's old profile and get him/her to logon to create a "fresh" profile (on the same PC). More often than not, this will solve the problem albeit some reconfiguration i.e. Outlook, Excel add-ins etc. As I took over the systems admin role from another administrator, I would like to know what is the easiest way to find out (either through a third party or some Windows administrative tool) what settings are carried over if the profile is a Roaming Profile. I tested creating a new user profile for one of my users and it seems basic Outlook settings such as the user's mailbox and PSTs are carried over automatically when I create a new user profile. I suspect this is done through a batch file loaded as part of the login script. However, my knowledge of scripting is limited and I don't want any corruptions to be carried over to the new profile. Can someone share their experiences on this? Thanks in advance.

    Read the article

  • Throttle CPU Usage consumed by Process

    - by Brett Powell
    We run a game-server company where we basically have large amounts of customers sharing a single machine, and are just on their own instance of a Java Process (Minecraft) managed by our Web Control Panels. In the last few game updates released, we have noticed that many of the third-party plugins our customer's use have become poorly written and we are frequently seeing huge CPU increases from certain servers until we manually kill the process. Our Game Panel automatically restarts processes, so killing them is not really an issue. Our problem is that once once of these servers starts consuming 50%+ CPU Usage, it takes atleast 5 minutes to RDP into the machine, locate who it belongs to, shut it down and notify them. Are there any current solutions for Server 2008 which allow for the throttling of CPU usage or worst case, just auto kill a process stuck using that much? As Minecraft is essentially a single-threaded application, we have investigated using Affinity, although with the variations in our Packages and fluctuations in usage, this doesn't work well for us. Some option to throttle the maximum usage a process can use would be perfect, or at least the option to kill a process using that much. Thanks!

    Read the article

  • How to wire 20 computers and 20 phones and 1 server into LAN?

    - by John Smith
    I have currently 3 switches Two Netgear JFS524 with 24 slots, One Belkin with 16 slots. Server DSL Internet Router. Main question is how to connect switches together, two Netgear's are next to each other, yet one is about 100 feet away and holds about 5 computer and 5 phones. If i connect them with only 1 wire will that limit bandwidth? e.g. all 23 computers will be limited to speed of one CAT5e cable? If i connect switches with 2 cables will this give speed boost? What's the ideal scenario should i just move the third switch next to other two? Will the speed of computer connected to white switch be same as computer connected to top switch? Will moving white switch right next top switch and having 16 wires comming 100 feet instead of 1 wire comming 100 feet make it faster? EDIT 1: I actually have NETGEAR ProSafe GS105 Gigabit switch its only has 4 ports in it though, you think i can have use of it in current setup? Like connect all 3 switches and server into it and keep internet router and phone server on one of the slower switches EDIT 2: Everyone mention gigabit switches, but will they do any difference with 10/100 network cards? I then have to use gigabit cards in every computer too? I could in server perhaps, but users will be 10/100

    Read the article

  • Synergy on macbook with osx mavericks wifi connection

    - by user332956
    I'm trying to set up Synergy with my macbook pro running OS X 10.9.3 as a client and my Windows 7 desktop as a server. I'm having some pretty bad connection problems though when I try to use my mac. Every couple seconds the mouse or the keyboard will stop working entirely then come back. I ran some tests and found that the ping from my desktop to my mac would be very high every third ping or so(1000+ ms) or sometimes even time out. If I ping my desktop from my mac the pings are all reasonably low. I believe that this is a power saving feature of Mavericks and I have found a way to get around it by continually pinging my router on my mac, keeping my wifi card from going to sleep. I'm using this right now to type this up with synergy and have had zero issues. Has anyone else ran into this issue and found a better solution? So far, I think my best bet would be to buy an ethernet adapter but I'd rather not have yet another cable running across my desk.

    Read the article

  • Windows roaming profile when creating a new Windows profile

    - by molecule
    Hi all, When a particular user is having a lot of problems with Windows XP e.g. applications crashing, unresponsive applications (which used to work), and as a general troubleshooting practice for a domain user, I normally rename that user's old profile and get him/her to logon to create a "fresh" profile (on the same PC). More often than not, this will solve the problem albeit some reconfiguration i.e. Outlook, Excel add-ins etc. As I took over the systems admin role from another administrator, I would like to know what is the easiest way to find out (either through a third party or some Windows administrative tool) what settings are carried over if the profile is a Roaming Profile. I tested creating a new user profile for one of my users and it seems basic Outlook settings such as the user's mailbox and PSTs are carried over automatically when I create a new user profile. I suspect this is done through a batch file loaded as part of the login script. However, my knowledge of scripting is limited and I don't want any corruptions to be carried over to the new profile. Can someone share their experiences on this? Thanks in advance.

    Read the article

  • HTTP Upload Problems

    - by jfoster
    We are running a marketplace on ColdFusion8 and IIS with a widely geographically distributed user base and have been receiving complaints of issues with some HTTP uploads. Most of the complaints are coming from geographically distant locations from our main datacenter on the US east coast. I've attempted to upload the same 70MB file from a US West coast test server to both our main site and a backup running the same code on a different network route and I saw the same issues fairly consistently in both places, so I've ruled out the code, route, and internal network errors. I've also tested uploads using both the native cf upload tag and a third party tool called SaFileUp. I saw the same issues with both upload tools, so I also don't think this is necessarily a ColdFusion problem. I don't have any problems uploading the test file from the East coast to other east coast servers, so I'm beginning to think that the distance between our users and our equipment is a factor. I've also found that smaller files are more likely to succeed than large ones (< 10MB) I tried the test upload with both IE and FF and did notice a difference in the way that the browsers seemed to handle packet errors. IE seemed to have a tough time continuing an upload after dropped / bad packets, whereas FF seemed to have the ability to gracefully resume an upload after experiencing packet problems. Has anyone experienced similar issues? Is there anything we can do on our side to make uploads more forgiving to packet loss or resumable after an error? A different upload tool etc… Do we need upload servers in more than one location to shorten the network routes between clients and servers? Does anyone think that switching uploads to SSL will help (no layer7 packet sniffing may lead to a smoother upload). Thanks.

    Read the article

  • Best way to mount 3-4 monitor like this?

    - by jasondavis
    I just purchased 2 HP 2009m widescreen monitors, they are not the biggest thing on the block, they are like 19-20" and are only around 150-200$ so I think they are perfect. I bought 2 of them just to make sure I like them, with the full intention of purchasing more to make either a tripple or quad display. I now I am stuck trying to decide, if I purchase 1 more to have a tripple display I would then like to just wrap the third monitor to either the rigth or left side, I could do this without a mount most likely pretty easy. If I decide to go with 2 more monitors to make a quad display then I would like to add the 2 new monitor directly above the 2 that I have now. So it would make a grid of 2 wide and 2 high. I have posted a few photos belwo to show them now with the 2 I have, you will notice that I have them tilted inwards to make more of a "V" shape instead of them being side by side and "STRAIGHT". Now if I decide to make thegrid of 4 then I will need to buy or build a stand to hold them all tightly together (no whitespace or gap between the grid of monitors) but I would like to still have both rows invert to make the slight "V". Do you know of any existing stands I could purchase that would hold all 4 monitors without making them be STARIGHT without the "V" shape? Any tips appreciated please, also they do have holes in the back for VESA. a few photos... (they are from iphone and lighting made them note very good but you can see what I am working with here)

    Read the article

  • Ubuntu 11.10 Virtual-box Unity 3D not working

    - by naveen
    After struggling for four hours, I still cannot get Unity 3D of Gnome 3 to work on my VirtualBox - I have been pouring through Internet and forum posts but to no avail. Here's what I've done so far: VirtualBox 4.1.4r74921 on Windows 7 Installed Ubuntu Desktop 11.10 ( 32 bit ) Enabled 3D acceleration Allocated 1.5GB of RAM Allocated 50MB video memory (hope this is not the culprit) Installed Guest edition 4.1.4 Did apt-get update and apt-get upgrade Booted back in to Ubuntu - falls back to Unity 2D Shared folder, mouse integration all works, so guest edition is properly installed Tried the command and below is the output /usr/lib/nux/unity_support_test –p OpenGL vendor string: Mesa Project OpenGL renderer string: Software Rasterizer OpenGL version string: 2.1 Mesa 7.11 Not software rendered: no Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: no GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: no I am trying to find what the "no" means but cannot find any good answers. Inter Core i5 processor 4GB of RAM on the host Display adapter: NVIDIA GeForce 8400GS Is anyone else facing the same problem? If so, can you point me to a solution or any reference where I can find a solution?

    Read the article

  • Ubuntu rm not deleting files

    - by ILMV
    My colleague and I have been struggling with deleting a directory and its contents. We are working on a new version of our websites source code on Ubuntu 8.04 (dir: /var/www/websites), what we want to do is delete the websites directory and recreate it from a .tar backup we created a couple weeks ago. The purpose of this is so we can run our deployment procedure in a local environment before we do so on our live / public environment. We use this command: rm -r websites This deletes the directory and the files within it. The problem occurs when we un-tar our backup file and view the website we are getting files that don't exist in the .tar backup, in fact these files were only created a few days ago and should have been deleted. We delete the directory once more in the manner stated above, we then create a new websites directory using the mkdir command. Strangely at this stage the 'deleted files' do not come back, but if we unpack our .tar file the 'deleted files' appear again. Is there a way to ensure these files are deleted, or at least the pointers that associate them with said directory. Our .tar backup does not include these files We do not want to use the shred command We do not want to use 3rd party applications Solution should be functional via terminal (SSH) Many thanks! EDIT Er... we fixed it. Turns out the files that are reappearing are because of a link we have to another directory (outside the /var/www/websites), we were restoring the link but not deleting the files on the other end. D'oh! Many thanks for your help guys... friday afternoon syndrome :-)

    Read the article

  • Apache2 with lighttpd as proxy

    - by andrzejp
    Hi, I am using apache2 as web server. I would like to help him lighttpd as a proxy for static content. Unfortunately I can not well set up lighttpd and apache2. (OS: Debian) Important things from lighttpd.config: server.modules = ( "mod_access", "mod_alias", "mod_accesslog", "mod_proxy", "mod_status", ) server.document-root = "/www/" server.port = 82 server.bind = "localhost" $HTTP["remoteip"] =~ "127.0.0.1" { alias.url += ( "/doc/" => "/usr/share/doc/", "/images/" => "/usr/share/images/" ) $HTTP["url"] =~ "^/doc/|^/images/" { dir-listing.activate = "enable" } } I would like to use lighttpd in only one site operating as a virtual directory on apache2. Configuration of this virtual directory: ProxyRequests Off ProxyPreserveHost On ProxyPass /images http://0.0.0.0:82/ ProxyPass /imagehosting http://0.0.0.0:82/ ProxyPass /pictures http://0.0.0.0:82/ ProxyPassReverse / http://0.0.0.0:82/ ServerName MY_VALUES ServerAlias www.MY_VALUES UseCanonicalName Off DocumentRoot /www/MYAPP/forum <Directory "/www/MYAPP/forum"> DirectoryIndex index.htm index.php AllowOverride None ... As you can see (or not;)) my service is physically located at the path: / www / myapp / forum and I would like to support lighttpd dealt with folders: / www / myapp / forum / images / www / myapp / forum / imagehosting / www / myapp / forum / pictures and left the rest (PHP scripts) for apache After running lighttpd and apache2 working party, but did not show up any images of these locations. What is wrong?

    Read the article

  • Fix: Connections to SQL Server 2005 on Windows Vista suddenly stop working

    - by NTulip
    On my Vista machine at work, applications and the SQL Server Management Console work fine connecting to SQL Server 2005. Sometimes they are ok for weeks at a time, sometime for hours and then they stop connecting. I've tried everything to get it to work including the installation of SPII and running the user provisioning tool without any luck. The only way to fix it was to restart. The Error: Connections are refused with the standard error message: Cannot connect to SERVER_NAME\INSTANCE_NAME ------------------------------ ADDITIONAL INFORMATION: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1) For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=-1&LinkId=20476 The Fix: Stop and restart the Sql Server Browser, Sql Server integration, SQL Server Active Directory Helper services. Works like a charm.

    Read the article

  • Recommendation for Document Management Solution

    - by BillN
    We've just been informed by our software vendor that the custom document management system they'd written is no longer in development, and will not be supported in the future. So we are looking at new document management systems. Requirements: Multiple input vectors, we receive documents via e-mail, fax, scanning, and from the originating application Ability to Redact or obscure data. Customers may fax an order with CC data, we want to attach the image of the order form with the order record, but the CC data needs to be protected. Same with Tax IDs. Certain users should be able to see the redacted data, but access should be logged. Version control on documents. We'd like Product Development and Marketing to be able to track various versions of documents like Packaging Designs, but ensure that users have the latest approved version. AD integration, my users don't need another password. Ability to integrate to other apps. Our current system, offers function keys in the order-entry system, that will spawn the viewer application, and open the correct document. Mass import facility, we have a half a terabyte of existing documents in the old system that we would like to import. Retention Policy. I'd like a way to have the system comply with the corporate retention policy, so that when a document of a certain type reaches a certain age, it gets deleted, or atleast marked for manual deletion. We are a Windows Server and HP-UX shop. Does anybody have any experience with Document Management systems that they would like to share? Thanks.

    Read the article

  • New virtualization project and old SAN

    - by Chris
    Hi, We'll start shortly a partial virtualization of our infrastructure and consolidate a dozen servers into virtuals instances. We'll also add some client application virtualization into the mix for good measure. Two HP DL 380 with the new xeons 56xx and 96 GB of memory each running xenserver + xenapp will then take charge of most of our IT needs. So far, so good. One element that is missing from the picture is the storage part. We need some sort of shared storage to enable live motion and other HA features. We have an IBM DS 4300 SAN that we can use for that. But since it's in production since 2005, I'm not sure about such a critical role for a 5yr old part. So my question is: What is the reliability of this kind of equipment after 5 yr ? Can it last 10 yr with no or few problems ? Since our budjet is tight, not buying another SAN will be a big plus. This lead me to another question: FC disks cost an arm and a leg from IBM. When I type the replacement # in google (for example IBM 300GB 15K 4GBPS FC HDD 42D0410), I can find it at a fraction of the price at various sites. So am I stupid to buy from IBM or naive to trust 3rd party reseller ?? Thanks, Chris

    Read the article

  • Is Windows Server 2008R2 NAP solution for NAC (endpoint security) valuable enough to be worth the hassles?

    - by Warren P
    I'm learning about Windows Server 2008 R2's NAP features. I understand what network access control (NAC) is and what role NAP plays in that, but I would like to know what limitations and problems it has, that people wish they knew before they rolled it out. Secondly, I'd like to know if anyone has had success rolling it out in a mid-size (multi-city corporate network with around 15 servers, 200 desktops) environment with most (99%) Windows XP SP3 and newer Windows clients (Vista, and Win7). Did it work with your anti-virus? (I'm guessing NAP works well with the big name anti-virus products, but we're using Trend micro.). Let's assume that the servers are all Windows Server 2008 R2. Our VPNs are cisco stuff, and have their own NAC features. Has NAP actually benefitted your organization, and was it wise to roll it out, or is it yet another in the long list of things that Windows Server 2008 R2 does, but that if you do move your servers up to it, you're probably not going to want to use. In what particular ways might the built-in NAP solution be the best one, and in what particular ways might no solution at all (the status quo pre-NAP) or a third-party endpoint security or NAC solution be considered a better fit? I found an article where a panel of security experts in 2007 say NAC is maybe "not worth it". Are things better now in 2010 with Win Server 2008 R2?

    Read the article

  • Files not being copied to AFP volume when copying through the Finder

    - by cefstat
    I am trying to copy files from my Macbook's hard disk to my NAS. The latter is a ReadyNAS Duo and is mounted as an AFP volume. The files are about 5MB each and I copy them by selecting in a Finder window all the files that I need and then dropping them onto the destination directory. Almost always some of the files do not get copied to the NAS. For example, if I select 200 files and then start the copying, everything looks at the beginning normal (while the copying takes place the Finder window for the destination directory is updated to show 200 files while it was empty before), but after the copying ends the destination directory shows less than 200 files (let's say 190). If I copy again the same 200 files to the NAS, without replacing already copied files, the remaining 10 files are usually copied correctly. In a few cases, I have to repeat the process a third time. Notice that the Finder does not give any warning that some of the files have not been copied at any stage. I am wondering if this a known problem with AFP and the Finder and/or if there is something that I can do to solve this problem.

    Read the article

< Previous Page | 323 324 325 326 327 328 329 330 331 332 333 334  | Next Page >