Search Results

Search found 6735 results on 270 pages for 'bootable media'.

Page 33/270 | < Previous Page | 29 30 31 32 33 34 35 36 37 38 39 40  | Next Page >

• Can't boot into Ubuntu from CD, or from Acronis True Image recovery disk

  - by ChrisA

  I can boot my computer off a home-burned-from-ISO-image Windows 7 (x64 or x86) installation CD, without problems. It's a Quad 6600, 4GB RAM, 8800GT and most of the time runs Win7 with no problems. However, if I boot off a CD containing Ubuntu (10.04 or 9.something IIRC), or a recovery disk created with Acronis True Image Home 2010, it: boots starts to load the OS from the CD then hangs ... and I have to reset. I've tried all these CDs on another computer, and they boot up into Ubuntu or Acronis respectively with no problems at all. Any ideas what to look for? Sorry this is a little vague but I have no idea where to start, really ... if there's more information needed I'll edit the question. TIA!

  Read the article

• How to Create Boot CD

  - by joe

  How to Create boot CD for Dual Booting System? Just consider I am having Windows and Ubuntu, Grup is boot loader. I just want to create Dual Boot CD for the same operation.

  Read the article

• How can I create a bootable DVD iso from a USB drive?

  - by Kiada

  There seems to be a lot of questions / answers about doing the reverse, but not as much info for USB - DVD. Problem I created a bootable USB drive using YUMI. The USB drive is working great, and contains the following: Linux Mint 13 Linux Mint Debian Debian 6 Ubuntu 12.04.1 Fedora 17 A bit of a mix of DVD and Live versions. I have a spindle of DVD+R DL blank DVD's. I would like to create a bootable .iso from this USB drive so I can burn multiple copies of it to pass around to friends! I've created an iso using Folder2ISO, but it coastered my DVD because it wasn't bootable. I don't really want to waste a whole spindle! How would you go about doing such a thing?

  Read the article

• Is it possible to put only the boot partition on a usb stick?

  - by Steve V.

  I've been looking at system encryption with ArchLinux and i think I have it pretty much figured out but I have a question about the /boot partition. Once the system is booted up is it possible to unmount the /boot partition and allow the system to continue to run? My thought was to install /boot to a USB stick since it can't be left encrypted and then boot from the USB stick which would boot up the encrypted hard disk. Then I can take the USB key out and just use the system as normal. The reason I want to do this is because if an attacker was able to get physical access to the machine they could modify the /boot partition with a keystroke logger and steal the key and if they already had a copy of the encrypted data they could just sit back and wait for the key. I guess I could come up with a system of verifying that the boot has been untouched at each startup. Has this been done before? Any guidance for implementing it on my own?

  Read the article

• Why does 'dd' not work for creating bootable USB?

  - by jdowner

  Recently I wanted to create a bootable USB of Linux mint. I found that there was a lot of conflicting advice/experience about whether the 'dd' command could be used to create a bootable USB. I decided to download an ISO and try. While dd definitely put the image on the USB stick it was not bootable. So my question is what is the magic ingredient that will make this work or why has this approach persisted if it does not work? This is the command I used, dd if=/mint/iso/image of=/dev/sdb1 oflag=direct

  Read the article

• Install Server 2003 from USB

  - by stalkerh

  I need some way to boot my windows server 2003 install from a USB drive , any suggestions welcome.

  Read the article

• Media Kind in iTunes COM for Windows SDK

  - by Joel Verhagen

  I recently found out about the awesomeness of the iTunes COM for Windows SDK. I am using Python with win32com to talk to my iTunes library. Needless to say, my head is in the process of exploding. This API rocks. I have one issue though, how do I access the Media Kind attribute of the track? I looked through the help file provided in the SDK and saw no sign of it. If you go into iTunes, you can modify the track's media kind. This way if you have an audiobook that is showing up in your music library, you can set the Media Kind to Audiobook and it will appear in the Books section in iTunes. Pretty nifty. The reason I ask is because I have a whole crap load of audiobooks that are showing up in my LibraryPlaylist. Here is my code thus far. import win32com.client iTunes = win32com.client.gencache.EnsureDispatch('iTunes.Application') track = win32com.client.CastTo(iTunes.LibraryPlaylist.Tracks.Item(1), 'IITFileOrCDTrack') print track.Artist, '-', track.Name print print 'Is this track an audiobook?' print 'How the hell should I know?' Thanks in advance.

  Read the article

• Media recommendation engine - Single user system - How to start

  - by Microkernel

  Hi guys, I want to implement a media recommendation engine. I saw a similar posts on this, but I think my requirements are bit different from those, so posting here. Here is the deal. I want to implement a recommendation engine for media players like VLC, which would be an engine that has to care for only single user. Like, it would be embedded in a media player on a PC which is typically used by single user. And it will start learning the likes and dislikes of the user and gradually learns what a user likes. Here it will not be able to find similar users for using their data for recommendation as its a single user system. So how to go about this? Or you can consider it as a recommendation engine that has to be put in say iPods, which has to learn about a single user and recommend music/Movies from the collections it has. I thought of start collecting the genre of music/movies (maybe even artist name) that user watches and recommend movies from the most watched Genre, but it look very crude, isn't it? So is there any algorithms I can use or any resources I can refer up to? Regards, MicroKernel :)

  Read the article

• Program to format every media in c++

  - by AtoMerZ

  Problem: I'm trying to write a program that formats any type of media. So far I've managed to format Hard disk partitions, flash memories, SDRAM, RDX. But there's this last type of media (DVD-RAM) I need to format. My program fails to format this media. I'm using the FormatEx function in fmifs.dll. I had absolutely no idea how to use this function Except for its name and that it resides in fmifs.dll. with the help of this I managed to find a simple program that uses this library. Yet still it doesn't give complete information about how to use it. What I've tried: I'm looking for a full documentation about FormatEx, its parameters, and exactly what values each parameter can take. I tried searching on google and MSDN. This is what I found. First of all this isn't the function I'm working with. But even putting that aside there's not enough information on how to use the function (Like which headers/libraries to use). EDIT: I don't have to use FormatEx if there's an alternative to use please tell.

  Read the article

• SQL Server 2008 Restore from Backup fails with error 3241 'cannot process this media family'

  - by pearcewg

  I am attempting to backup a database from a SQL Server instance on one machine and restore it to another, and I am encountering the frequently discovered 'SQL Server cannot process this media family' error. Each of my instances are SQL Server 2008, but with different patch levels Restore: 10.0.2531.0 Backup: 10.0.1600.22 ((SQL_PreRelease).080709-1414 ) The restore DB is express. Not sure about the backup version. The backup version is on a virtual private server. The restore is on my development box. When I restore to a different database on the source (backup) server, it restores fine. Lots of stuff on google about this issue, some on stackoverflow about this issue, but nothing which is this exact situation. Any thoughts? It should be straightforward to do a backup and restore from one machine to another (having done this thousands of times in with SQL 6.5,7,2000,2005). Any ideas how to restore a database in this situation, which gives this error when attempting to restore? PARTIAL RESOLUTION: When I restored to a different box, running SQL 2008 Express on Windows Server 2003, all worked well. It just wouldn't work on the Windows 7 box. Not sure why. If anyone else has a similar experience, please let me know (there are many similar issues in different forums out there).

  Read the article

• Xbox360 Universal Media Remote - out of sync?

  - by Traveling Tech Guy

  Hi, I have the Universal Media Remote from Microsoft, which was included with my HD-DVD package. I've been using it for over a year to watch videos/DVDs on my Xbox360 and it saved me the hassle of navigating with the game controller (which turns itself off every 5 minutes).All of a sudden (it didn't fall or suffer any severe trauma), it does not communicate with the Xbox anymore: it is on, I replaced batteries several times, but the Xbox does not respond to commands. The TV does - volume, channels, etc. - but I need the Xbox functionality.As far as I can see, there's no way to sync the remote with the Xbox - it lacks that small sync button that the game controllers have.I called Microsoft Support and spoke for an hour to someone who, I guess didn't know what to do at all. Bottom line - since it's been over a year, they won't fix/replace it - I have to get a new one.Before I do (if I do), I need to know if there's anything I can do with the existing remote, and will I have the same problem with a new one (i.e. the problem is with the Xbox itself)? Thanks!

  Read the article

• Acronis Disk Director AFTER Clone Disk error: PXE-E61: Media test failure, check cable

  - by Kairan

  Used Acronis Disk Director on my desktop, plugged in the laptop drive 240GB SSD (USB) and the new hard drive 500GB SSD (usb) and the copy seemed to be fine. I didnt see any error messages but I didnt stare at it for 3 hours either. The clone disk of course the Toshiba hidden restore partition, the primary partition C drive and the active (boot?) partition and yes, did check box for copy NT signature. The computer boots up fine most of the time, but it seems that when the computer goes to sleep (i believe its sleep, hard to do much testing during school) or hibernate or reboot it will sometimes display this message: Intel(R) Boot Agent GE v1.3.52 Copyright (C) 1997-2010, Intel Corporation PXE-E61: Media test failure, check cable PXE-M0F: Exiting Intel Boot Agent Insert system disk in drive. Press any key when ready... Of course any key does nothing but repeat a similar method. However, if I press the power button on the laptop (Toshiba Portege R705, Win 7 Pro 64-bit) it puts computer into hibernate. After hibernating I press power button again and it comes out of hibernation without any odd messages or problems described above... so apparently that is my TEMP fix. Another recent issue I noticed is on occasion when creating a new folder or modifying something in the system variables, other random areas I will get a message: "The Stub received bad data" and simply retry the task and it works. Perhaps these two issues are linked.

  Read the article

• Custom flash uploader breaks only on Media Temple

  - by LaserWolf

  I've built a flash uploader to upload files up to 100MB using a php backend. It works wonderfully on our dev server, on a hostgator vps, and on one of our clients' servers running Debian. It will not work on our Media Temple (dv)3.5 and I don't know why. The upload will start but will choke after a few seconds with this flash error message: ioerror: [IOErrorEvent type="ioError" bubbles=false cancelable=false eventPhase=2 text="Error #2038: File I/O Error. URL: http://..._upload.php"] The problem seems to be specific to the asynchronous nature of the flash uploader because if I try a straight php upload it works fine. The php.ini settings are set to allow such a large upload as well. Also, I've thoroughly googled flash, 2038, I/O error, etc but have yet to find anything that helped. Here's the weird part though: We work in Seattle. It won't work from the office. It won't work from home. But, while on the phone with MT's support, they were able to upload a file through our flash uploader just fine. I'm not sure where his office was located but I think it was Atlanta. So the problem also seems specific to physical location. Has anyone run into this sort of problem before?

  Read the article

• Better approach to archiving large amounts of original video footage using optical media (DVD/Blu-ra

  - by Rob

  This question is to share my experience as well as ask for suggestions for better methods. Along with 2 friends, I completed the making of a short documentary film in 2006. Clip is at: http://www.youtube.com/mediamotioninvision The film was edited in Adobe Premiere Pro 1.5 on Windows XP. More details and screenshot here: http://www.flickr.com/photos/smilingrobbie/1350235514/ ( note this is not intended to be a plug, we've moved on from this initial learning curve project ;) ) The film is in 4:3 standard definition 720x576 PAL format. As well as retaining the final 30minute film, I wanted to keep all original files that assembled together to make the film. The footage was 83.5Gb So I archived them to over 20 4.7Gb DVD recordables in the original .avi format (i.e. data DVD-ROM format, NOT DVD-Video Mpeg2) Some .avi DV video files were larger than 4.7Gb so I used 7-zip to split them ( here is a guide as to how to do that: http://www.linglom.com/2008/10/12/how-to-split-a-large-file-using-7-zip/ ) To recombine them, a dos shell command like this would do that: copy /b file.avi.* file.avi would do the job, where .* is a wild card to include all the split parts e.g. 001, 002...00n assuming they are all in the same directory path folder. file.avi is the recombined file identical to the original. Later on, I bought a LG BE06 LU10 USB 2.0 Super-multi Blu-ray burner and archived the footage to 2 (two) x 50Gb BD-R DL discs. Again in the original format, written as files to a BD-R in the BD-R BD-ROM UDF format readable by PC/Mac etc, NOT Blu-ray video/film format. This seems to be a good solution for me, because: the archive is in a robust, reasonably permanent, non-volatile medium, i.e. DVD recordable / Blu-ray (debates about stability of optical media organic chemical dye compounds/substrates aside) the format of the archive is accessible by open source tools or just plain Windows Explorer and it's not in a proprietary format I just thought I'd ask folks for their experience on better methods, if such exist.

  Read the article

• Multi-WAN bonding across different media

  - by Tom O'Connor

  I've recently been thinking again about a product that Viprinet provide, basically they've got a pair of routers, one that lives in a datacentre, Their VPN Multichannel Hub and the on-site hardware, their VPN multichannel routers They've also got a bunch of interface cards (like HWICs) for 3G, UMTS, Ethernet, ADSL and ISDN adapters. Their main spiel seems to be bonding across different media. It's something that I'd really like to use for a couple of projects, but their pricing is really quite extreme, the hub is about 1-2k, the routers are 2-6k, and the interface modules are 200-600 each. So, what I'd like to know is, is it possible with a couple of stock Cisco routers, 28xx or 18xx series, to do something similar, and basically connect a bunch of different WAN ports, but have it all presented neatly as one channel back to the internet, with seamless (or nearly) failover if one of the WAN interfaces should fail. Basically, If i got 3x 3G to ethernet modems, and each on a different network, I'd like to be able to loadbalance/bond across all of them, without having to pay Viprinet for the privilege. Does anyone know how I'd go about configuring something for myself, based around standard protocols (or vendor specific ones), but without actually having to buy the Viprinet hardware?

  Read the article

• Windows media scaling/interpolation method

  - by MichaelH

  Usually in Windows, if videos or other media is upscaled from a certain resolution to a higher resolution (e.g. "monitor size"), a bilinear filtering algorithm or similar is used, such that the upscaled material doesn't look blocky. On my system however, the used interpolation algorithm changed from 'bilinear' to 'nearest neighbor' at some point, with the effect that upscaled videos (e.g. viewed in MPC or WMP, and also Skype video streams) and games (e.g. from PopCap) appear rather blocky. Not sure what the common factor between those is, could be DirectShow(?). I am not aware of having changed any setting that could have affected this state, in fact I am not even aware such a setting exists. I'm guesing that some installed software must have changed something on my computer. My computer is running Windows 7, but I had already experienced the same effect on an XP machine some while ago, where it changed back again to the more pleasing bilinear interpolation after a while, as magically as the first time. What could be wrong with this installation, and how can I change this upscaling interpolation behavior?

  Read the article

• map linux drives to windwos 7 for media stream over internet

  - by Ortix92

  I'm trying to map a linux network drive to my windows 7 laptop, however this laptop is not on LAN. At home, I simply use Samba, but this obviously won't work over the internet. I'm trying to avoid VPN, so if there are other solutions, I would like to know about them. The reason I ask is because my university does this as well. We can simply map folders to our computers without VPN connections. I'm not sure what they are running as servers. The main reason is because I want to be able to access my files stored on my home server wherever I go. They are located in the /home/ folder (videos, music and pictures folder). I'm trying to keep my websites and media separate from each other. I wouldn't mind accessing them from a web interface either, but I would like to keep the directory structure intact. I remember having an app like that come with winamp and running it on my windows pc (As the server). Unfortunately it doesn't work for linux. Any ideas on what I could use? Would XBMC be able to help me out with this? I did do some researching but I couldn't find any concrete answers

  Read the article

• Disk Error on Boot (Possible boot sector issue)

  - by Choco

  I own a 4-5 year old Dell Dimension E510 with Windows XP: Media Center Edition. I have 2 drives installed: C Drive: Windows XP: Media Center Edition G Drive: 2 partitions: Windows 7 (beta) Windows XP (professional) That is also the order they are connected. The C Drive is my primary drive. When I attempt to boot the computer, the bios loading screen appears normally; the progress bar moves and it's fine. The very next page, however, supposed to be a boot choice. When I installed Windows 7 onto the G Drive in context of the C drive it added a boot selector to the C drive's boot sequence. It gives me the option of booting Windows 7 or Windows XP: Media Center Edition. However, my problem is now this: After the bios screen I previously mentioned, instead of a boot selector, I receive the following error: A disk read error occurred. Press CTRL+ALT+DEL to restart. The drive is spinning up normally. I hear no odd noises/clicks/scraping coming from it, even after disabling the other drive to listen to it carefully. According to me, it's a boot sector issue. I have never experienced this before, but maybe during a recent shutdown, Windows XP: MCE errored out and ruined the boot sector. Dilemma! I don't have the Windows XP: MCE disc, because it was installed by the factory. I have accessed the hidden partition on the drive before (you hit a key combination on the bios screen and it comes up with an interface to fix your drive). However, I don't want to reformat the drive (which is what the interface gives me the option to do). I want to possibly fix the boot sector. How can I achieve that?

  Read the article

• This .mpg video clip doesn't play well

  - by Roey

  I've installed K-lite mega codec pack v6.9.0 with playback essentials without player. My default and only media player is windows media player. here are the clip's media info: General Complete name : D:\Users\Roey\Downloads\B384MV.mpg Format : MPEG-PS File size : 273 MiB Duration : 4mn 59s Overall bit rate : 7 643 Kbps Video ID : 224 (0xE0) Format : MPEG Video Format version : Version 2 Format profile : Main@High Format settings, BVOP : No Format settings, Matrix : Default Format settings, GOP : M=1, N=15 Duration : 4mn 57s Bit rate mode : Variable Bit rate : 7 363 Kbps Nominal bit rate : 9 000 Kbps Width : 1 920 pixels Height : 1 080 pixels Display aspect ratio : 16:9 Frame rate : 25.000 fps Color space : YUV Chroma subsampling : 4:2:0 Bit depth : 8 bits Scan type : Progressive Compression mode : Lossy Bits/(Pixel*Frame) : 0.142 Stream size : 261 MiB (96%) Audio ID : 192 (0xC0) Format : MPEG Audio Format version : Version 1 Format profile : Layer 3 Mode : Joint stereo Duration : 4mn 59s Bit rate mode : Constant Bit rate : 128 Kbps Channel(s) : 2 channels Sampling rate : 44.1 KHz Compression mode : Lossy Stream size : 4.56 MiB (2%) Menu When I play it there is no sound (just a little "kahhhh" noise every 10-20 seconds) and the frames are moving very slow - it "jumps" frames. A blue tray icon [FFa] "ffdshow audio decoder" pops with the following details: Input:MP3, stereo, 44100 Hz (libavocodec) Output:PCM, stereo, 44100 Hz, 16-bit integer Any help will be much appreciated. Thanks

  Read the article

• Synergy 1.4.2 Linux server, OSX client, Media/Function key mapping issues

  - by at165dB

  I'm using an Apple bluetooth keybord to control my Linux synergy server. SSH tunneling, Mouse, Keyboard, and Copy&Paste all work. Linux sees all the media/app keys that are on top of the F# keys correctly. However if I press any of those keys while controlling my OSX client, nothing happens on the client. Running synergys with -d DEBUG1 I can see the following keycode info: Pressing the "dim monitor" key that also serves as F1 generates: new mask: 0x2000 event: KeyPress code=232, state=0x0010 new mask: 0x2000 If I press "fn" and the same key, I can see it sending what I'm assuming is an F1: event: KeyPress code=67, state=0x0010 onKeyDown id=61374 mask=0x2000 button=0x0043 send key down to "foo.cisco.com" id=61374, mask=0x2000, button=0x0043 new mask: 0x2000 event: KeyRelease code=67, state=0x0010 onKeyUp id=61374 mask=0x2000 button=0x0043 send key up to "foo.cisco.com" id=61374, mask=0x2000, button=0x0043 I'm guessing I need to tweak my synergy.conf so that the server sends keys that it currently isn't. I'm also not sure what I need to do to tweak the keys that it is sending, but are not working. Below are all the other keys I'm having issues with. Does anyone have any idea how I can enable their functionality? brighten monitor: new mask: 0x2000 event: KeyPress code=233, state=0x0010 new mask: 0x2000 expose: new mask: 0x2000 event: KeyPress code=128, state=0x0010 new mask: 0x2000 dashboard: new mask: 0x2000 event: KeyPress code=212, state=0x0010 new mask: 0x2000 dim keyboard: new mask: 0x2000 event: KeyPress code=237, state=0x0010 new mask: 0x2000 brighten keyboard: new mask: 0x2000 event: KeyPress code=238, state=0x0010 new mask: 0x2000 rewind: event: KeyPress code=173, state=0x0010 onKeyDown id=57521 mask=0x2000 button=0x00ad send key down to "foo.cisco.com" id=57521, mask=0x2000, button=0x00ad new mask: 0x2000 event: KeyRelease code=173, state=0x0010 onKeyUp id=57521 mask=0x2000 button=0x00ad send key up to "foo.cisco.com" id=57521, mask=0x2000, button=0x00ad play/pause: event: KeyPress code=172, state=0x0010 onKeyDown id=57523 mask=0x2000 button=0x00ac send key down to "foo.cisco.com" id=57523, mask=0x2000, button=0x00ac new mask: 0x2000 event: KeyRelease code=172, state=0x0010 onKeyUp id=57523 mask=0x2000 button=0x00ac send key up to "foo.cisco.com" id=57523, mask=0x2000, button=0x00ac fastforward: event: KeyPress code=171, state=0x0010 onKeyDown id=57520 mask=0x2000 button=0x00ab send key down to "foo.cisco.com" id=57520, mask=0x2000, button=0x00ab new mask: 0x2000 event: KeyRelease code=171, state=0x0010 onKeyUp id=57520 mask=0x2000 button=0x00ab send key up to "foo.cisco.com" id=57520, mask=0x2000, button=0x00ab mute: event: KeyPress code=121, state=0x0010 onKeyDown id=57517 mask=0x2000 button=0x0079 send key down to "foo.cisco.com" id=57517, mask=0x2000, button=0x0079 new mask: 0x2000 event: KeyRelease code=121, state=0x0010 onKeyUp id=57517 mask=0x2000 button=0x0079 send key up to "foo.cisco.com" id=57517, mask=0x2000, button=0x0079 volume down: onKeyDown id=57518 mask=0x2000 button=0x007a send key down to "foo.cisco.com" id=57518, mask=0x2000, button=0x007a new mask: 0x2000 event: KeyRelease code=122, state=0x0010 onKeyUp id=57518 mask=0x2000 button=0x007a send key up to "foo.cisco.com" id=57518, mask=0x2000, button=0x007a volume up: event: KeyPress code=123, state=0x0010 onKeyDown id=57519 mask=0x2000 button=0x007b send key down to "foo.cisco.com" id=57519, mask=0x2000, button=0x007b new mask: 0x2000 event: KeyRelease code=123, state=0x0010 onKeyUp id=57519 mask=0x2000 button=0x007b send key up to "foo.cisco.com" id=57519, mask=0x2000, button=0x007b eject: event: KeyPress code=169, state=0x0010 onKeyDown id=57345 mask=0x2000 button=0x00a9 send key down to "foo.cisco.com" id=57345, mask=0x2000, button=0x00a9 new mask: 0x2000 event: KeyRelease code=169, state=0x0010 onKeyUp id=57345 mask=0x2000 button=0x00a9 send key up to "foo.cisco.com" id=57345, mask=0x2000, button=0x00a9

  Read the article

• Device driver with generic communication media layer

  - by Tom

  Greetings all, I'm trying to implement driver for an embedded device with generic communication media layer. Not sure what is the best way to do it so I'm seeking an advice from more experienced stackoverflow users:). Basically we've got devices around the country communicating with our head office. Usual form of communication is over TCP/IP, but could be also using usb, RF dongle, IR, etc. The plan is to have object corresponding with each of these devices, handling the proprietary protocol on one side and requests/responses from other internal systems on the other. The thing is how create something generic in between the media and the handling objects. I had a play around with the TCP dispatcher using boost.asio but trying to create something generic seems like a nightmare :). Anybody tried to do something like that? What is the best way how to do it? Cheers, Tom

  Read the article

• Aero Glass Buttons Like Windows Media Player?

  - by Tanner

  Hi everybody, I am making making a program and I want to have a Aero Glass set of controls just like Windows Media Player, I found this: http://blogs.msdn.com/b/tims/archive/2006/04/18/578637.aspx but it just draws black. I also found a control that had the media player controls built in right ton the glass but it was no good it didn't want to render right and made different parts of my program not work. Any controls, or ways to extend the Aero glass so I can at least add my own buttons would be greatly appreciated. Thanks :) BTW C# only. :)

  Read the article

• How to get the playing file total time duration Media player

  - by Geetha

  Hi All, I use media player control to play mp3 files in asp.net application. I want to find When the playing process gets end and the total time require to finish the file using javascript. Code: <object id="mediaPlayer" classid="clsid:22D6F312-B0F6-11D0-94AB-0080C74C7E95" codebase="http://activex.microsoft.com/activex/controls/mplayer/en/nsmp2inf.cab#Version=5,1,52,701" height="1" standby="Loading Microsoft Windows Media Player components..." type="application/x-oleobject" width="1"> <param name="fileName" value="" /> <param name="animationatStart" value="true" /> <param name="transparentatStart" value="true" /> <param name="autoStart" value="true" /> <param name="showControls" value="true" /> <param name="volume" value="100" /> <param name="loop" value="true" /> </object> Geetha.

  Read the article

• Joomla 1.5 Media Manager sets incorrect file permissions when uploading

  - by Scott Mayfield

  Howdy all, I have a Joomla 1.5 installation running on Windows Server 2008, installed via the Web Platform Installer. When uploading images with the media manager (native uploader, not the flash bulk uploader), the files arrive on the server correctly, but are given incorrect permissions. Specifically, the IIS_IUSRS group is not given access to the file. I might be incorrect about what group/user is SUPPOSED to get access to the files, but so far, I've found that unless I give IIS_IUSRS access to the uploaded files, they won't appear on the site or in the media manager (appear as broken images). Once I give IIS_IUSRS permission to the files, they work fine. So far, all the research I've done has led me to linux specific fixes that involve either changing the umask on the server, or directly modifying the Joomla codebase to add an appropriate chmod command to the upload process, but I really don't want to modify Joomla directly. I have to believe there's a setting here somewhere that will do the job, either on the Joomla or Windows side of the equation. Any thoughts? Scott

  Read the article

• Invoking browser on streaming media URLs

  - by Maven

  I have a dirt simple little function that launches the blackberry browser on a streaming media file in order to launch the built in media player. Everything works fine but there is this annoying dialog every time from the browser asking me if I want to save or open the file. My answer is always "open" the file so is there a way I can make it default and not bring up the dialog each time? The code I'm using to launch the browser // Get the default sessionBrowserSession browserSession = Browser.getDefaultSession(); // now launch the URL browserSession.displayPage(url); This is on blackberry OS 5.0 Thanks!

  Read the article

< Previous Page | 29 30 31 32 33 34 35 36 37 38 39 40  | Next Page >