Search Results

Search found 15087 results on 604 pages for 'copy constructor'.

Page 33/604 | < Previous Page | 29 30 31 32 33 34 35 36 37 38 39 40  | Next Page >

  • Cisco 7206 error trying to copy running-config (Bad file number)

    - by jasondewitt
    I have a cisco 7206 that terminates a bunch of pppoa sessions for dsl users. Today I noticed that if I tried to "show run" nothing happened. I mean that it doesn't show anything and just sends me right back to the command prompt. I decided I should probably try and back up the config and that is where I'm stuck. Any time I try to copy the running-config to tftp or to pcmcia card that I know is not full I get the following error: %Error opening system:/running-config (Bad file number) I get this error when I try to do anything with the running config. I've been googling around, but I haven't found any thing else that talks about this error. I've seen people say to erase the nvram and then try to "copy run start", but I don't want to erase the nvram until I can pull off a copy of the running-config. I would try to reboot it, but the startup-config that is on the nvram looks to be woefully out of date (good job me!). Any ideas what might be wrong? or how I can get the running config off the router?

    Read the article

  • my asp.net mvc 2.0 application fails with error "No parameterless constructor defined for this objec

    - by loviji
    Hello, i'm new in asp.net mvc 2. I'm trying to list all data from one table(ms sql server table). as ORM I use Entity Framework. now, I'm tried to write something to do this: Model: private uqsEntities _uqsEntity; public permissionRepository(uqsEntities uqsEntity) { _uqsEntity = uqsEntity; } public IEnumerable<userPermissions> getAllData() { return _uqsEntity.userPermissions; } controller: private DataManager _dataManager; public ManagePermissionsController(DataManager datamanager) { _dataManager = datamanager; } public ActionResult Index() { return RedirectToAction("List"); } [AcceptVerbs(HttpVerbs.Get)] public ActionResult List() { return List(null); } [AcceptVerbs(HttpVerbs.Post)] public ActionResult List(int? userID) { return View(_dataManager.Permission.getAllData().ToList()); } Route: routes.MapRoute( "ManagePerm", // Route name "{controller}/{action}/{id}", // URL with parameters new { controller = "ManagePermissions", action = "Index"}, new string[] { "uqs.Controllers" } // Parameter defaults ); and View automatically generated by Visual Studio(in action mouse right-click). when I run app. , my app. fails. No parameterless constructor defined for this object. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.MissingMethodException: No parameterless constructor defined for this object. Source Error: An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace: [MissingMethodException: No parameterless constructor defined for this object.] System.RuntimeTypeHandle.CreateInstance(RuntimeType type, Boolean publicOnly, Boolean noCheck, Boolean& canBeCached, RuntimeMethodHandle& ctor, Boolean& bNeedSecurityCheck) +0 System.RuntimeType.CreateInstanceSlow(Boolean publicOnly, Boolean fillCache) +86 System.RuntimeType.CreateInstanceImpl(Boolean publicOnly, Boolean skipVisibilityChecks, Boolean fillCache) +230 System.Activator.CreateInstance(Type type, Boolean nonPublic) +67 System.Web.Mvc.DefaultControllerFactory.GetControllerInstance(RequestContext requestContext, Type controllerType) +80 [InvalidOperationException: An error occurred when trying to create a controller of type 'uqs.Controllers.ManagePermissionsController'. Make sure that the controller has a parameterless public constructor.] System.Web.Mvc.DefaultControllerFactory.GetControllerInstance(RequestContext requestContext, Type controllerType) +190 System.Web.Mvc.DefaultControllerFactory.CreateController(RequestContext requestContext, String controllerName) +68 System.Web.Mvc.MvcHandler.ProcessRequestInit(HttpContextBase httpContext, IController& controller, IControllerFactory& factory) +118 System.Web.Mvc.MvcHandler.BeginProcessRequest(HttpContextBase httpContext, AsyncCallback callback, Object state) +46 System.Web.Mvc.MvcHandler.BeginProcessRequest(HttpContext httpContext, AsyncCallback callback, Object state) +63 System.Web.Mvc.MvcHandler.System.Web.IHttpAsyncHandler.BeginProcessRequest(HttpContext context, AsyncCallback cb, Object extraData) +13 System.Web.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +8679186 System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +155 please, somebody, help me to catch problem.

    Read the article

  • Wpf usercontrol with parameterised constructor

    - by Miral
    Hi, We are using Microsoft Unity and we are using dependency injection and so we have parametrised constructor. So now how to call such a usercontrol in the main window. I see the below error when i added the usercontrol in xaml. "It does not define a public parameterless constructor or a type converter" I have added the usercontrol in XAML as below xmlns:usrRefundArrivalProcessor="Ttl.Refunds.Wpf.Dashboad.Application.Usercontrols;assembly=Ttl.Refunds.Wpf.Dashboad.Application"

    Read the article

  • Java: why does extending need an empty constructor?

    - by HH
    I have classes SearchToUser and getFilesToWord. GetFilesToWord must inherit SearchToUser fields. Extending works if an empty construction in SearchToUser-class, otherwise: cannot find symbol symbol : constructor SearchToUser() location: class SearchToUser public class GetFilesToWord extends SearchToUser{ ^ 1 error make: *** [all] Error 1 I cannot understand why the empty constructor is required for extending.

    Read the article

  • Define Default constructor Structuremap in a Generic Repository

    - by Ricky
    Hello guys, I have a generic IRepository that has 2 constructors, one have none parameters, other has the datacontext as parameter. I want to define to structuremap to aways in this case use the parameterless constructor. I want a way to create a parameterless contructor, other solutions that I have seen, they create a new Datacontext and pass it to the constructor that has parameters.

    Read the article

  • Virtual member call in a constructor when assigning value to property

    - by comecme
    I have an Abstract class and a Derived class. The abstract class defines an abstract property named Message. In the derived class, the property is implemented by overriding the abstract property. The constructor of the derived class takes a string argument and assigns it to its Message property. In Resharper, this assignment leads to a warning "Virtual member call in constructor". The AbstractClass has this definition: public abstract class AbstractClass { public abstract string Message { get; set; } protected AbstractClass() { } public abstract void PrintMessage(); } And the DerivedClass is as follows: using System; public class DerivedClass : AbstractClass { private string _message; public override string Message { get { return _message; } set { _message = value; } } public DerivedClass(string message) { Message = message; // Warning: Virtual member call in a constructor } public DerivedClass() : this("Default DerivedClass message") {} public override void PrintMessage() { Console.WriteLine("DerivedClass PrintMessage(): " + Message); } } I did find some other questions about this warning, but in those situations there is an actual call to a method. For instance, in this question, the answer by Matt Howels contains some sample code. I'll repeat it here for easy reference. class Parent { public Parent() { DoSomething(); } protected virtual void DoSomething() {}; } class Child : Parent { private string foo; public Child() { foo = "HELLO"; } protected override void DoSomething() { Console.WriteLine(foo.ToLower()); } } Matt doesn't describe on what error the warning would appear, but I'm assuming it will be on the call to DoSomething in the Parent constructor. In this example, I understand what is meant by a virtual member being called. The member call occurs in the base class, in which only a virtual method exists. In my situation however, I don't see why assigning a value to Message would be calling a virtual member. Both the call to and the implementation of the Message property are defined in the derived class. Although I can get rid of the error by making my Derived Class sealed, I would like to understand why this situation is resulting in the warning.

    Read the article

  • IoC.Resolve vs Constructor Injection

    - by Omu
    I heard a lot of people saying that it is a bad practice to use IoC.Resolve(), but I never heard a good reason why (if it's all about testing than you can just mock the container, and you're done). now the advantages of using Resolve instead of Constructor Injection is that you don't need to create classes that have 5 parameters in the constructor, and whenever you are going to create a instance of that class you're not gonna need to provide it with anything

    Read the article

  • Entity Framework .. partial constructor

    - by adamjellyit
    Hi .. I intend to extend the constructors of some of the entities in my Entity Framework (4). However how do I ensure that my constructor is run after the model has run its. i.e. I want to ensure that the the object holds the data from the database before I work on it in my constructor.

    Read the article

  • How to unmangle PDF format into a usable text or spreadsheet document?

    - by Chuck
    Upon requesting some daily/hourly sales data from a coworker who is responsible for such requests, I was given a series of PDF files. The point of sale program that is used, for some reason, answers requests for this type of information in the form of PDF files. The issue: The PDF files look to be in a format that should easily be copy and pasted into a spreadsheet. There are three columns that look to be neatly organized across two pages. When copy/pasting the first page, all three columns from the PDF's first page are dumped into a single column consisting of the Date followed by the Hours for the transactions on that day. The end of this Date/Time information is followed by all of the Total Sales values that should be attached a Date and Time of the transaction. (NOTE: There are no duplicated Dates in the Date column, ie, Multiple transactions for a day only have one yyyy/mm/dd listed for the first row but not the following rows.) While it was a huge pain, it was possible to, in about four or five steps, get the single column of data broken out into three columns that matched the PDF. The second page of the PDF file, when attempting to copy/paste into a spreadsheet, creates a single column with the first third of the cells being the Dates from the PDF, the second third of the cells being the Hours of the transactions and the final third of the cells being filled with the Total Sales. After the copy/paste there is no way to figure out which Hours belong to which Dates or Total Sales due to the lack of the duplicated Dates in the Date column as mentioned above. My PDF-fu is next to non-existent. I've just now started to work with PDF editors and some www.convertmyPDFforfree.com websites, so far, with absolutely nothing remotely coming anywhere near usable output. (Both methods have so far done nothing but product blank documents.) Before I go back and pester my co-worker into figuring out a way to create a report in some other format than PDF, is there any method by which to take the data that looks to be formatted correctly in a PDF and copy/paste it into a spreadsheet that will look the same? I appreciate any help that can be made available. The sales data isn't so sensitive that I couldn't part with a bit to let somebody actually see what it is that needs to be dealt with, just let me know. The PDF's are less than 100kb each so sending them shouldn't be a burden to any interested party.

    Read the article

  • explicit copy constructor or implicit parameter by value

    - by R Samuel Klatchko
    I recently read (and unfortunately forgot where), that the best way to write operator= is like this: foo &operator=(foo other) { swap(*this, other); return *this; } instead of this: foo &operator=(const foo &other) { foo copy(other); swap(*this, copy); return *this; } The idea is that if operator= is called with an rvalue, the first version can optimize away construction of a copy. So when called with a rvalue, the first version is faster and when called with an lvalue the two are equivalent. I'm curious as to what other people think about this? Would people avoid the first version because of lack of explicitness? Am I correct that the first version can be better and can never be worse?

    Read the article

  • Hosting a subversion working copy in an remote WebDAV folder

    - by Daniel Baulig
    This might be a bit awkward, but I'll try to explain what I am trying to achieve and what problems I encountered. First of all: whats this about? I am currently trying to set up a distributed working enviroment for developing a web page. My plan was to setup a SVN repository for version control, a live server where the actual live page ist hosted and a development server where I can work on the page. To ease things I intended to not have a local copy of the project on my disk, but to actually work directy on the files, that the development server hosts. For that I setup a WebDAV directory, under devserver.com/workspace, that actually mapped to files served under devserver.com/. So I could connect to devserver.com/workspace, change something and view the results live at devserver.com/. So far this worked perfectly. The next step was to create a SVN repository that would take care of my version control. I intended to be able to checkin to the reposiroty from my development server and at any time, with a small shell script, deploy any revision from the svn to the live server by checking out a copy of the revision into the live server directories. The second part, checking out into the live server, also worked perfectly. The first part though is where problems arose: My workstation is a Windows 7 machine. I connected to the WebDAV share using Windows built-in WebDAV support, which worked quite well. I can create, move, delete, edit, whatever files on my WebDAV share from my Windows machine perfectly. The next step was to checkout a working copy from the SVN (actually hosted at devserver.com/subversion/) into the WebDAV share. In the first try I used the Eclipse plugin subversive. The actual checkout worked fine and I can update and commit stuff to the repository, however, I cannot add any files to the ignore list. It always brings me an error. So I tried the same thing with a complete fresh repository using TortoiseSVN - and again it failed with the same errors. Here is what it says when trying to add files to svnignore: Some of selected resources were not added to ignore. svn: Cannot rename file '\\devserver.com@SSL\DavWWWRoot\workspace\.svn\tmp\dir-props.66fd8936-2701-0010-bb76-472f0b56a5d1.tmp' to '\\devserver.com@SSL\DavWWWRoot\workspace\.svn\tmp\dir-props' This is what apache2 tells me, when I try to add a file to svnignore: [Sun Mar 07 03:54:19 2010] [error] [client xxx.xxx.xxx.xxx] Negotiation: discovered file(s) matching request: /var/www/devserver.com/.svn/tmp/dir-props (None could be negotiated). [Sun Mar 07 03:54:31 2010] [error] [client xxx.xxx.xxx.xxx] (20)Not a directory: The URL contains extraneous path components. The resource could not be identified. [400, #0] Actually both messages are repeated several times. The first one occurs first and is repeated about 5 times and the second comes there after and is repeated propably more than 20 times. If I create a regular file, delete, rename or modify it none of those messages appear in my error.log While writing this question now I was able to add fils to svnignore using TortoiseSVN. However, after that, Eclipse would not let me commit anymore. The error that used to pop up when adding files to svnignore now also shows up while commiting. While searching the web I found some people having this same message appearing because they had files only different in upper- / lower-case naming. I checked my repository and did not find such files. I also read somewhere about people having troubles with WebDAV and file locking, because WebDAV's file locking capabilities seem to be very limited. At some stage I got errors telling me my repository was locked and thus the operations could not be completed. This error though did not appear anymore, since I setup a completely fresh repository and working copy. I would really appreciate any help anyone can provide me in fixing this problem! If there are any more questions feel free to ask. I know this is a somewhat unusual setup. Best regards, Daniel

    Read the article

  • Performance of Cluster Shared Volume file copy from SAN

    - by Sequenzia
    I am hoping someone can help me out with a strange issue. We are running a Microsoft Failover Cluster with Server 2008 R2 and an Equallogic PS4000 SAN. Our main configuration has 2 Dell Poweredge T710 Servers in the cluster. We have CSV and Quorm setup. The servers each have 10 Broadcom 1Gb NICs. Right now 4 of the NICS are on the iSCSI network for accessing the SAN. They use MPIO and the Dell HIT pack. We have 5 VMs running on each node and everything runs smooth. No noticeable performance issues or anything. From the SAN I can see the 4 iSCSI connections from each server to each volume (CSV and Quorm). Again, it seems to perform great. The problem I am running into is with backups. I have tried a few backup programs like backupchain and Veeam. The problem is both of them are very very slow to backup the VMs. For instance I have a 500GB (fixed disc) VHD that’s running on the cluster. It takes over 18 hours to backup that VHD and that’s with compression and depuping turned off which is supposed to be the fasted. We also have a separate server that is just for backups. It has a lot of directed attached storage. As part of the troubleshooting I decided to bring that server into the cluster as a node. It now has access to the CSV and can read from C:\clusterstorage\volume1 which is where our VHDs live. This backup server only has 2 NICs. 1 NIC is going to the iSCSI network and the other is just on the main network. It has Intel NICS in it without any sort of MPIO or teaming. So with the 3rd server now in the cluster I started doing some benchmarking. I have a test VHD that’s about 7GBs that’s stored in the CSV. I have tested file copying that VHD from all 3 servers to directed attached storage in the respective server. The 2 Dell servers that are the main nodes in the cluster (they house the VMs) are reading that file at about 20Mbs/Sec. Which at that rate is way to slow for the backups. The other server which only has 1 NIC to the SAN is reading at around 100Mbs/Sec. I spent a few hours on the phone with Dell today about this . We went through all kind of tests and he was pretty dumb founded. He really has no idea why that server with only 1 NIC is reading about 5 times as fast as the servers with 4 NICS and MPIO. We looked at the network utilization of the NICs while the file copy was going on. The servers with the 4 NICs had a small increase of activity during the file copy but they only went up to around 8-10% on all 4 NICs. The other server with the 1 NIC jumped up to over 80% during the file copy. I plan on doing some more testing after hours and calling Dell back tomorrow but I really am confused (and so is Dell’s support rep) why I cannot get faster file copy access to the CSV on those servers. Anyone have any input on this? Any feedback would be greatly appreciated. Thanks in advance.

    Read the article

  • Constructor and Destructor of a singleton object called twice

    - by Bikram990
    I'm facing a problem in singleton object in c++. Here is the explanation: Problem info: I have a 4 shared libraries (say libA.so, libB.so, libC.so, libD.so) and 2 executable binary files each using one another shared library( say libE.so) which deals with files. The purpose of libE.so is to write data into a file and if the executable restarts or size of file exceeds a certain limit it is zipped and a new file is created with time stamp in name. It is using singleton object. It exports a handler class for getting and using singleton. Compressing only happens in the above said two cases. The user/loader executable can specify the starting name of file only no other control is provided by handler class. libA.so, libB.so, libC.so and libD.so have almost same behavior. They all have a class and declare and object of an handler which gets the instance of the singleton in libE.so and uses it for further purpose. All these libraries are linked to two executable binary files. If only one of the two executable runs then its fine, But if both executable runs one after other then the file of the first started executable gets compressed. Debug info: The constructor and destructor of the singleton object is called twice.(for each executable) The object of singleton is a static object and never deleted. The executable is not able to exit/return gives: glibc detected * (exe1 or exe2): double free or corruption (!prev): some_addr * Running with binaries valgrind gives that the above error is due to the destructor of the singleton object. Thanks

    Read the article

  • If I define a property to prototype appears in the constructor of object, why?

    - by Eduard Florinescu
    I took the example from this question modified a bit: What is the point of the prototype method? function employee(name,jobtitle,born) { this.name=name; this.jobtitle=jobtitle; this.born=born; this.status="single" } employee.prototype.salary=10000000; var fred=new employee("Fred Flintstone","Caveman",1970); console.log(fred.salary); fred.salary=20000; console.log(fred.salary) And the output in console is this: What is the difference salary is in constructor but I still can access it with fred.salary, how can I see if is in constructor from code, status is still employee property how can I tell for example if name is the one of employee or has been touch by initialization? Why is salary in constructor, when name,jobtitle,born where "touched" by employee("Fred Flintstone","Caveman",1970); «constructor»?

    Read the article

  • How to access previous VHD versions of system backup?

    - by feklee
    Quote from the 31 Oct 2009 TechNet article "Learn more about system image backup": During the first backup, the backup engine scans the source drive and copies only blocks that contain data into a .vhd file stored on the target, creating a compact view of the source drive. The next time a system image is created, only new and changed data is written to the .vhd file, and old data on the same block is moved out of the VHD and into the shadow copy storage area. Volume Shadow Copy Service is used to compute the changed data between backups, as well as to handle the process of moving the old data out to the shadow copy area on the target. This approach makes the backup fast (since only changed blocks are backed up) and efficient (since data is stored in a compact manner). When restoring the image, blocks will be restored to their original locations on the source disk. If you want to restore from an older backup, the engine reads from the shadow copy area and restores the appropriate blocks. For the last days, a daily system backup of drive C: to drive E: has been scheduled and run by Windows 7 Backup and Restore. Drive C: currently holds 233 GB of data, which fits comfortably on drive E:, a 1 TB drive, with 727 GB of free space remaining. How do I access the previous version of a VHD? I right clicked on files and folders in E:\WindowsImageBackup, and I looked for Previous Versions but always: There are no previous versions available

    Read the article

  • Passing List of Strings or Array of strings into Unity Injection Constructor (Config-Based)

    - by miguel
    I cannot seem to get unity working when attempting to pass in an array of strings into a constructor parameter list, while using XML configuration. When I try the following: <typeConfig ...> <constructor ...> <param ... parameterType="System.String[]"> <array> <value.../> <value.../> </array> </param> </constructor> </typeConfig> for a c'tor which looks like this: void Foo(string[] inputParams_){ ... } It always fails in Unity's FindConstructor(...) method stating that it cannot find a c'tor mathcing the parameter type of String.String Does anyone know how to pass an array of stings successfully into this type of c'tor? If not, how can I do so with a list of strings, if the c'tor were to accept an IList? Thanks!

    Read the article

  • Enum "does not have a no-arg default constructor" with Jaxb and cxf

    - by Dave
    A client is having an issue running java2ws on some of their code, which uses & extends classes that are consumed from my SOAP web services. Confused yet? :) I'm exposing a SOAP web service (JBoss5, Java 6). Someone is consuming that web service with Axis1 and creating a jar out of it with the data types and client stubs. They are then defining their own type, which extends one of my types. My type contains an enumeration. class MyParent { private MyEnumType myEnum; // getters, settters for myEnum; } class TheirChild extends MyParent { ... } When they are running java2ws on their code (which extends my class), they get Caused by: com.sun.xml.bind.v2.runtime.IllegalAnnotationsException: 2 counts of IllegalAnnotationExceptions net.foo.bar.MyEnuMType does not have a no-arg default constructor. this problem is related to the following location: at net.foo.bar.MyEnumType at public net.foo.bar.MyEnumType net.foo.bar.MyParent.getMyEnum() The enum I've defined is below. This is now how it comes out after being consumed, but it's how I have it defined on the app server: @XmlType(name = "MyEnumType") @XmlEnum public enum MyEnumType { Val1("Val1"), Val2("Val2") private final String value; MyEnumType(String v) { value = v; } public String value() { return value; } public static MyEnumType fromValue(String v) { if (v == null || v.length() == 0) { return null; } if (v.equals("Val1")) { return MyEnumType.Val1; } if (v.equals("Val2")) { return MyEnumType.Val2; } return null; } } I've seen things online and other posts, like (this one) regarding Jaxb's inability to handle Lists or things like that, but I'm baffled about my enum. I'm pretty sure you can't have a default constructor for an enum (well, at least a public no-arg constructor, Java yells at me when I try), so I'm not sure what makes this error possible. Any ideas? Also, the "2 counts of IllegalAnnotationsExceptions" may be because my code actually has two enums that are written similarly, but I left them out of this example for brevity.

    Read the article

  • Generic object to object mapping with parametrized constructor

    - by Rody van Sambeek
    I have a data access layer which returns an IDataRecord. I have a WCF service that serves DataContracts (dto's). These DataContracts are initiated by a parametrized constructor containing the IDataRecord as follows: [DataContract] public class DataContractItem { [DataMember] public int ID; [DataMember] public string Title; public DataContractItem(IDataRecord record) { this.ID = Convert.ToInt32(record["ID"]); this.Title = record["title"].ToString(); } } Unfortanately I can't change the DAL, so I'm obliged to work with the IDataRecord as input. But in generat this works very well. The mappings are pretty simple most of the time, sometimes they are a bit more complex, but no rocket science. However, now I'd like to be able to use generics to instantiate the different DataContracts to simplify the WCF service methods. I want to be able to do something like: public T DoSomething<T>(IDataRecord record) { ... return new T(record); } So I'd tried to following solutions: Use a generic typed interface with a constructor. doesn't work: ofcourse we can't define a constructor in an interface Use a static method to instantiate the DataContract and create a typed interface containing this static method. doesn't work: ofcourse we can't define a static method in an interface Use a generic typed interface containing the new() constraint doesn't work: new() constraint cannot contain a parameter (the IDataRecord) Using a factory object to perform the mapping based on the DataContract Type. does work, but: not very clean, because I now have a switch statement with all mappings in one file. I can't find a real clean solution for this. Can somebody shed a light on this for me? The project is too small for any complex mapping techniques and too large for a "switch-based" factory implementation.

    Read the article

  • How to handle 'this' pointer in constructor?

    - by Kyle
    I have objects which create other child objects within their constructors, passing 'this' so the child can save a pointer back to its parent. I use boost::shared_ptr extensively in my programming as a safer alternative to std::auto_ptr or raw pointers. So the child would have code such as shared_ptr<Parent>, and boost provides the shared_from_this() method which the parent can give to the child. My problem is that shared_from_this() cannot be used in a constructor, which isn't really a crime because 'this' should not be used in a constructor anyways unless you know what you're doing and don't mind the limitations. Google's C++ Style Guide states that constructors should merely set member variables to their initial values. Any complex initialization should go in an explicit Init() method. This solves the 'this-in-constructor' problem as well as a few others as well. What bothers me is that people using your code now must remember to call Init() every time they construct one of your objects. The only way I can think of to enforce this is by having an assertion that Init() has already been called at the top of every member function, but this is tedious to write and cumbersome to execute. Are there any idioms out there that solve this problem at any step along the way?

    Read the article

  • Constructor on type: "Namespace.type" not found.

    - by Nick
    Hello, I am using Castle.Windsor as an IOC. So I am trying to resolve a service type in the constructor of an HTTPHandler. I keep receiving this error, "Constructor on type: "Namespace.type" not found." My configuration has the following entries for service type: IDocumentDirectory <component id="restricted.content.directory" service="org.healthwise.foundations.services.content.IDocumentDirectory, org.healthwise.foundations.services" type="org.healthwise.foundations.services.content.RestrictedLocalizationDocumentDirectory, org.healthwise.foundations.services"> <parameters> <contentDirectory>${content.directory}</contentDirectory> <localizations> <array> <item>en-us</item> <item>es-us</item> </array> </localizations> </parameters> </component> <component id="content.directory" service="org.healthwise.foundations.services.content.IDocumentDirectory, org.healthwise.foundations.services" type="org.healthwise.foundations.services.web.client.WebServiceDocumentDirectory, org.healthwise.foundations.services.web.client"> <parameters> <webServiceURL>#{contentDirectoryWebsiteUrl}</webServiceURL> </parameters> </component> In my new handler the constructor looks like this: public HeartBeatHttpHandler(IDocumentDirectory contentDirectory) { _contentDirectory = contentDirectory; } I have never recieved this error using Castle.Windsor. Can someone explain? Thanks!

    Read the article

  • Problem inserting Pygames on a wxPython panel using Boa Constructor

    - by Kohwalter
    Hello, im new in Python so im hoping to to get some help to figure out what is going wrong. Im trying to run a Pygames from within wxPython panel (made on Boa Constructor). To do that i followed the instructions on the http://wiki.wxpython.org/IntegratingPyGame but still it isn't working. Here is the Panel code that was used to make the integration: class PG_panel(wx.Panel): def __init__(self, ID, name, parent, mypos, mysize): # pygame is imported in this class # make it globally available global pygame #self.Fit() wx.Panel.__init__(self, id=wxID_FRMMAINPANELTABULEIRO, name='panelTabuleiro', parent=self, pos=(16, 96), size=mysize) # pygame uses SDL, set the environment variables os.environ['SDL_WINDOWID'] = str(self.GetHandle()) os.environ['SDL_VIDEODRIVER'] = 'windib' # do the pygame stuff after setting the environment variables import pygame pygame.display.init() # create the pygame window/screen screen = pygame.display.set_mode(464, 464) #(424,450) # start the thread instance self.thread = PG_thread(screen) self.thread.start() def __del__(self): self.thread.stop() And im trying to use that panel on an interface from Boa Constructor, here is the code: class frmMain(wx.Frame): def _init_ctrls(self, prnt): # generated method, don't edit wx.Frame.__init__(self, id=wxID_FRMMAIN, name='frmMain', parent=prnt, pos=wx.Point(660, 239), size=wx.Size(815, 661), style=wx.DEFAULT_FRAME_STYLE, title='Grupo 1 - Jogo de Damas') self._init_utils() self.SetClientSize(wx.Size(799, 623)) self.SetBackgroundColour(wx.Colour(225, 225, 225)) self.SetMinSize(wx.Size(784, 650)) self.Center(wx.BOTH) self.SetMenuBar(self.menuBar1) #here begins my code mysize = (464, 464) mypos = (16, 96) self.panelTabuleiro = PG_panel(wxID_FRMMAINPANELTABULEIRO, 'panelTabuleiro', self, mypos, mysize) The original that was auto-made by the Boa Constructor is the following: self.panelTabuleiro = wx.Panel(id=wxID_FRMMAINPANELTABULEIRO, name='panelTabuleiro', parent=self, pos=wx.Point(16, 96), size=wx.Size(464, 464), style=wx.TAB_TRAVERSAL) self.panelTabuleiro.SetBackgroundColour(wx.Colour(232, 249, 240)) self.panelTabuleiro.SetThemeEnabled(True) self.panelTabuleiro.SetHelpText('Tabuleiro') The error that it gives is: Type error: in method 'new_Panel', expected argument 1 of type 'wxWindow*1 Exception AttributeError: "'PG_panel' object has no attribute 'thread' in ignored Any thoughts ? I appreciate any help. Thank you.

    Read the article

  • Constructor issue

    - by laura
    This is the code that I worked on and I don't understand what it's happening on constructor Package obj2(); On output are displayed only the values 4 (Package obj1(4)) and 2 (Package obj3(2)) #include <iostream> using namespace std; class Package { private: int value; public: Package() { cout<<"constructor #1"<<endl; value = 7; cout << value << endl; } Package(int v) { cout<<"constructor #2"<<endl; value = v; cout << value << endl; } ~Package() { cout<<"destructor"<<endl; cout << value << endl; } }; int main() { Package obj1(4); Package obj2(); Package obj3(2); }

    Read the article

  • Can't copy file with green filename, access denied

    - by Swinders
    Using Windows Explorer under XP I see some of my files have green filenames. When I try and copy one of these files I get an error reporting Access denied. The My pictures folder also appears with green text and I have a large number of photos from family holidays I don't want to loose. I need to backup these files as I'm changing laptop soon. We use SafeBoot to encryt our hard drives but I don't think this is the problem as it allows me to copy other files to removable media with no problems. Has anybody come across this before and how can I resolve this?

    Read the article

< Previous Page | 29 30 31 32 33 34 35 36 37 38 39 40  | Next Page >