Search Results

Search found 8627 results on 346 pages for 'extreme feedback devices'.

Page 33/346 | < Previous Page | 29 30 31 32 33 34 35 36 37 38 39 40  | Next Page >

  • Huawei E3276 LTE uplink slow in the routing Ubuntu, but not with other devices in the LAN

    - by Mytomi
    I have a Huawei E3276 LTE dongle (12d1:14fe - 12d1:1506) and a problem with the upstream speed. The problem is not only present with Ubuntu 14.04 LTS (64 bit workstation, kernel 3.16), but also with Raspbian Jessie for Raspberry PI (kernel 3.14). Upstream seems to be always limited to 5 Mbit/s whenever I check the speed from the Linux computer that I use as a LTE router. The other computers in the LAN always get about 10-15 Mbit/s upstream, even though the traffic is routed through the same Linux computer suffering from seemingly capped uplink. Downstream speed is always fine, 25 Mbit/s. I even installed Windows 7 in the same computer as Ubuntu and the speeds are 25 Mbit/s down, 15 Mbit/s up. So the problem is not with E3276 device itself or in the mobile subscription, but in the Huawei E3276 Linux compatibility. Maybe something in the kernel? I have made sure that the matter is not with iptables rules: the speed does not noticeably increase when iptables is disabled. Turning off IPv4 forwarding does not improve speed either. I'm not sure what settings and logs do help in debugging the situation. Please ask for more details, if you have a clue what might be wrong. Thanks, Mytomi

    Read the article

  • Can Flash games packed for iOS and other mobile devices achieve reasonable performance?

    - by puppybeard
    I was thinking of developing a game in Flash, as a hobby/educational project. However, I was hoping I could make it run on a smartphone, but a friend who develops in Flash says that in their experience things will move really slow on the likes of an iPad when the Flash packager is used. So slowly that you can't use it commercially for fast-moving games. Has anyone else experienced this slowness? Is there a way around it or is the technology just not there yet?

    Read the article

  • How to approach big developer companies if I have a killer game idea? (for mobile devices)

    - by Balázs Dávid
    I have an idea for a game that has a potential, but I'm not a programmer. How to tell this to development companies without being my idea stolen? All I want from the company is first to watch a 3-minute long video presentation about my idea and if they see fantasy in it then we can talk about the details. I have already sent an e-mail to several big companies that have the expertise needed to code the game, they haven't answer me. Actually the idea is nothing fancy, no 3D, but fun and unique.

    Read the article

  • Can't mount USB devices, shut down etc. as a user

    - by Alok
    I tried gnome3 and gnome3-staging ppas to test running Gnome 3.8. After a while I decided that Gnome 3.8 wasn't for me, so I did a ppa-purge of both the ppas. As described in gnome3-staging ppa page, I also did: $ sudo apt-get purge libpam-systemd $ sudo apt-get install libpam-xdg-support The trouble is, I can't mount my external USB device anymore. When I try to mount it as a user, it fails: $ udisks --mount /dev/sdc1 Mount failed: Not Authorized I am logged in an XFCE session, but the same thing happens in a fallback Gnome session, or from a Unity session. Also, in XFCE, "suspend" and "shut down" menus are grayed out. I can't also open synaptic package manager from XFCE menus (sudo synaptic works). After a lot of searching, it seems like it is a policykit issue. I see the following in my ~/.xsession-errors: (polkit-gnome-authentication-agent-1:5805): polkit-gnome-1-WARNING **: Unable to determine the session we are in: No session for pid 5805 PID 5805 doesn't exist. If I try to start polkit-dnome-authentication-agent-1 from an xterm, I get the same error (different PID): $ /usr/lib/policykit-1-gnome/polkit-gnome-authentication-agent-1 ... (polkit-gnome-authentication-agent-1:15971): polkit-gnome-1-WARNING **: Unable to determine the session we are in: No session for pid 15971 (the ... lines are warnings from GTK about missing css files etc.). polkitd is running: $ pidof polkitd 1495 Is there something I am missing?

    Read the article

  • How can I make an unmounted / unmountable NTFS disk not show up in the nautilus devices area?

    - by Dennis
    I have an idea that my /etc/fstab is a real mish-mash and I don't remember how it got that way, first of all it looks like this UUID=9EB80807B807DD21 /media/Storage ntfs-3g users 0 0 UUID=a60397fd-964a-45b1-ad35-53c8a4bee010 / ext4 defaults 0 1 UUID=1764825d-b8ba-4620-b3b0-e979b6f4f5c4 swap swap sw 0 0 UUID=255DA1E406E29DBC /media/sda2 ntfs-3g defaults 0 0 UUID=2CCCF161CCF1262C /mnt/sda1 ntfs-3g umask=000 0 0 /dev/fd0 /media/floppy0 vfat noauto 0 0 I started with an old XP install on disk /dev/sda that I don't use anymore but didn't want to delete, so I shrunk the XP partition, added a NTFS partition that would be common to both systems (Labeled it "Common" in XP), then installed Lucid on an extended ext4 partition. On this disk of course the ext4 system partition comes up as /, the go between partition auto-mounts on /media/sda1 but shows up in Nautilus as COMMOM, while the XP system disk does not show up in Nautilus, but I can get to it by navigating to /mnt/sda1. A second hard drive (/dev/sdb) that I stuck in was already formatted NTFS with a bunch of stuff and labeled "Storage". It auto-mounts to /media/Storage but another un-mounted disk also shows up in the Nautilus device area called Storage but it can't be mounted (Here and in the "Places" are the only times it appears) I would primarily like this non-existant (or already mounted depending on how you look at it) disk to not show up, but I wouldn't mind an explanation of why one labeled partition auto-mounts to a /media mount point but shows up by label, one does not show up as mounted at all but mounts to a /mnt mount point and is there for navigation, and one is mounted to a directory of the same name as the label. I would love to have some consistancy / direction on what is proper in this circumstance. No doubt I caused this with the fstab but I really don't remember what my rational was if I edited it manually

    Read the article

  • What Interface Toolkit is being recommended for Ubuntu on Nexus7/Mobile Devices?

    - by Baggers
    I understand this is a may be a very premature question given that the current build is for testing Ubuntu Core, but I have just bought a Nexus7 to join in with this Ubuntu on mobile adventure and can't help wanting to start writing some apps! I haven't really dabbled with either GTK or QT for touch apps yet and, having seen that Ubuntu TV is using Nux, I wondered what people on AskUbuntu-land would recommend. Hope someone out there know this! Cheers

    Read the article

  • How to prevent one account from unlocking products on other devices using Apple StoreKit?

    - by reapz
    We are currently wrapping up a free-to-play game on iOS in which you can purchase non-consumable products. We have been discussing this case internally and are not quite sure what the best practices are as this is our first title. For example, if a user downloads our app, and makes some purchases. These can be restored should the app ever be deleted and reinstalled as long as the user uses the same Apple ID. What is to stop him from making a fake Apple account, purchasing items and then posting this account on the web allowing everyone to get the items for free? That is obviously a worst case situation. But a smaller case would be a user unlocking items for his friends. We do not want this to be an always online game but have considered doing a check on startup if there is internet available. If the currently logged in account doesn't own the products do we lock them again? Probably not because people may simply sign into the device with different Game Center logins at which point we don't want to constantly lock and unlock items. At some point we will be adding multiplayer at which point we can definately do a check with the currently logged in account. This is because A, they will be online when attempting multiplayer, and B, they will want to use their own account for multiplayer. Unfortunately we aren't quite ready for this yet. Has anyone tackled this issue. Are we overthinking here?

    Read the article

  • Sharing files with Android devices (How do I mount an HP Touchpad, Cyanogen Mod 9?)

    - by C.Werthschulte
    I've recently installed Cyanogen Mod 9 on my HP Touchpad tablet, but I'm encountering problems when trying to access it from my Ubuntu laptop (Ubuntu 11.10, Gnome-Shell, Nautilus). I've first tried accessing it via PTP as suggested here. Ubuntu will recognize the Touchpad as a digicam and only grant me access to two directories: "DCIM" and "Pictures". I then tried accessing the tablet via MTP using this post on OMGUbuntu!. Ubuntu will connect to the tablet, but only grant me access to a folder named "Playlists". I'm a bit clueless as to what I'm doing wrong and would very much appreciate any help or hints. Many thanks!

    Read the article

  • What's the closest thing to Apple's SpriteKit on Android devices? [on hold]

    - by Krumelur
    I've been playing around with the iOS 7 SpriteKit APIs and I totally love them. As I'm pretty much a n00b on Android, I'm wondering what the best Alternative would be if I wanted to go cross platform? I find Cocos2D learning curve pretty steep, where with SpriteKit it's a matter of minutes to get something on the screen. Then there's MonoGame and Cocos 2D for MonoGame - haven't tried either one I must admit.

    Read the article

  • How to store an iOS game save file in multiple devices? (Without remote servers)

    - by Omega
    I've been developing an iOS game for iPhone. My game saves the progress as a couple of .plist documents in the device. I have come to realize that when I install a game in my iPhone, this same game is installed in my iPad. And then it struck me: how would I manage save files? I mean, I'd like the player to be able to continue playing from where they left no matter what device are they using... without using remote servers. What have you done to address this issue?

    Read the article

  • Does My Computer Use More Electricity When Charging USB Devices?

    - by Jason Fitzpatrick
    Your computer consumes a large amount of power just idling there awaiting your command, does charging a smartphone or tablet off one of the USB ports impose much of a demand on it? Today’s Question & Answer session comes to us courtesy of SuperUser—a subdivision of Stack Exchange, a community-driven grouping of Q&A web sites. Image available as wallpaper at WallpapersWide.    

    Read the article

  • How do I force the system to look for new sound devices?

    - by John Zeringue
    I have a small flat screen TV (Toshiba) that I often connect via HDMI to my laptop (an HP Pavilion dv4) and use as a computer monitor. When I do this, I prefer to use the TV's speakers, particularly when I'm watching video, because the sound quality is much better. However, when I connect the HDMI cable after turning on my computer (rather than having it plugged in before booting up), Sound Settings does not list the TV as an output device, and I am forced to reboot. I was curious if there is an easier solution to this, perhaps a CLI command to check for new sound outputs. Does anyone know of something like this or have another solution? To clarify, I believe this is a software problem. The HDMI always works, and I can switch my desktop over to the TV at any time. The issue is that, if the HDMI wasn't connected during start up, the TV will not appear as an output option in the Sound Settings GUI. So, unless I'm mistaken, my question is not HDMI specific, but rather a general usage question about manipulating sound settings from the command line.

    Read the article

  • A Single wireless network is not showing up in Ubuntu that used too, and other devices have no issue finding or connecting to it

    - by Kit Sunde
    Up until about a week ago I could connect to my wireless, but now I suddenly can't. Every other wireless in the area show up in the network manager. My kindle can connect to it, my friend can connect to it (in windows) without having connected to it before. My other netbook (Samsung NC10) can connect to it, but my other Samsung N150 now cannot even see it. I have tried deleting the old auto entry for it in the network manager Tried disabling and enabling both the networking and the wireless through the network indicator. Disabled the networking through the hardware shortkut key thing [fn] + [F9] Attempting to connect to it as if it was a hidden network. I'm at a loss, how would I go about debugging and unborking my computer?

    Read the article

  • What is the proper way to set my drawable directories to support the new Dell Streak without losing support for older devices?

    - by emmby
    This seems to be a widespread problem. I have the following drawable directories: drwxr-xr-x 18 mike staff 612 Feb 4 17:28 drawable/ drwxr-xr-x 51 mike staff 1734 Feb 4 17:32 drawable-nodpi/ drwxr-xr-x 44 mike staff 1496 Feb 4 17:30 drawable-normal-mdpi/ My xml drawable resources are in drawable. My resources intended for the large-mdpi (Dell Streak) and normal-hdpi (Droid, Nexus, Incredible, etc.) are all in drawable-nodpi. My resources for normal-mdpi (older phones like the G1) are in drawable-normal-mdpi. Unfortunately, the normal-hdpi phones like the Droid are pulling their resources from drawable-normal-mdpi instead of from drawable-nodpi. This is likely because of the rules in How Android Finds the Best-matching Resource. So the question is, how do I provide support for large-mdpi devices like the Streak along with normal-hdpi devices like the Droid, as well as normal-mdpi devices like the G1? The simplest solution would probably be to make two copies of my large resources, one in normal-hdpi for the droid and one in large-mdpi for the streak, but i'd like to avoid duplicating all of these resources. Update Per Mayra's suggestion, I could make an alias for every resource. However, there are a lot of resources I'd have to make aliases for, which would make maintenance a nightmare going forward, so I'm hoping for another solution.

    Read the article

  • To display the images in mobile devices is it necessary that the images should resides on device in

    - by Shailesh Jaiswal
    I am devloping smart device application in C#. In this application I have some images in my application which I used to dispay on emulator from my application. To display the images on emulator I need to create the one folder of images which resides on the emulator. Only after that I am able to display the images in emulator. I am able to create the folder in emulator by using File-Configure-General-Shared Folder. For sharing the folder I am giving the path of the folder which contains the images. Once I share the folder the folder of images which resides in my application will get copied in emulator with the name "Storage Card". Now I need to use the path as Bitmap bmp=new Bitmap(@"/Storage Card/ImageName.jpg"); Now I am able to display the images in emulator. Can we display the images in the emulator without any image folder which resides on emultor (so that we dont need to place the image folder in emulator as in the above case by sharing the folder) ? If the answere is no then to run the application on different mobile devices we need to place the folder which contains the images on different mobile devices. Isnt it? If the answere is yes then how we can display the images on different mobile device from our application without placing any folder of images on mobile devices?

    Read the article

  • Exchange server not serving mobile devices - how to troubleshoot?

    - by chickeninabiscuit
    Our exchange server has suddenly stopped serving mobile devices. Attempts to connect result in our ActiveSync server returning HTTP 500. It is serving outlook clients fine. Our server is Windows 2003 SBS 6.5 SP2 There are no abnormal events in the system log. I ran the "Exchange ActiveSync with AutoDiscover" at https://www.testexchangeconnectivity.com/ I've notice an abnormality in the exchange properties, Log File Directory shows: Access denied. Facility: Win32 ID no: 80070005 Exchange System Manager As shown in the following image: I think it may be related to a recent issue we had here: http://serverfault.com/questions/40222/windows-server-2003-suddenly-unable-to-connect-to-anything We followed a procedure to reinstall TCP/IP: http://support.microsoft.com/kb/325356 I've run the "exchange activesync" connectivity test at testexchangeconnectivity.com: Attempting to Resolve the host name mail.immersive.com.au in DNS. Host successfully Resolved Additional Details IP(s) returned: 221.133.203.229 Testing TCP Port 443 on host mail.immersive.com.au to ensure it is listening/open. The port was opened successfully. Testing SSL Certificate for validity. The certificate passed all validation requirements. Test Steps Validating certificate name Successfully validated the certificate name Additional Details Found hostname mail.immersive.com.au in Certificate Subject Common name Validating certificate trust for Windows Mobile Devices Certificate is trusted and all certificates are present in chain Additional Details Certificate is trusted for Windows Mobile 5 and Later platforms. Root = [email protected], CN=Thawte Server CA, OU=Certification Services Division, O=Thawte Consulting cc, L=Cape Town, S=Western Cape, C=ZA Testing certificate date to ensure validity Date Validation passed. The certificate is not expired. Additional Details Certificate is valid: NotBefore = 1/5/2009 4:00:00 PM, NotAfter = 1/11/2010 3:59:59 PM Testing Http Authentication Methods for URL https://mail.immersive.com.au/Microsoft-Server-Activesync/ Http Authentication Methods are correct Additional Details Found all expected authentication methods and no disallowed methods. Methods Found: Basic Attempting an Activesync session with server Errors were encountered while testing the ActiveSync session Test Steps Attempting to send OPTIONS command to server OPTIONS response was successfully received and is valid Additional Details Headers received: MicrosoftOfficeWebServer: 5.0_Pub Pragma: no-cache Public: OPTIONS, POST Allow: OPTIONS, POST MS-Server-ActiveSync: 6.5.7638.1 MS-ASProtocolVersions: 1.0,2.0,2.1,2.5 MS-ASProtocolCommands: Sync,SendMail,SmartForward,SmartReply,GetAttachment,GetHierarchy,CreateCollection,DeleteCollection,MoveCollection,FolderSync,FolderCreate,FolderDelete,FolderUpdate,MoveItems,GetItemEstimate,MeetingResponse,ResolveRecipients,ValidateCert,Provision,Search,Notify,Ping Content-Length: 0 Date: Thu, 16 Jul 2009 01:07:27 GMT Server: Microsoft-IIS/6.0 X-Powered-By: ASP.NET Attempting FolderSync command on ActiveSync session FolderSync command test failed Tell me more about this issue and how to resolve it Additional Details Exchange

    Read the article

  • How to stream TV/Films/Music over the internet to various devices from a home server?

    - by ritch0s
    Set up: An always on old-ish laptop connected to a NAS which contains TV/Films/Music. I want to be able to stream on the fly the data on my NAS to various connected devices such as iphone or laptop. I am currently using Orb (orb.com) mycast software but the requirements for the streaming are very high in terms of processing power is there alternative software and dedicated hardware i can add to get maximum benefit from this setup?

    Read the article

  • How to interpret the contents of /proc/bus/pci/devices ?

    - by vivekian2
    The first few fields of 'cat /proc/bus/pci/devices' are understandable. Field 1 - BusDevFunc Field 2 - Vendor Id + Device Id Field 3 - Interrupt Line Field 4 - BAR 0 and the rest of the BAR registers (0 - 5) after that. After the BAR registers are printed out, what are the other fields? Specifically, what PCI configuration space registers(offsets) are printed out?

    Read the article

  • Raid 5 with 4 disks on Debian automatically creates a spare drive

    - by Razer
    I'm trying to to create a RAID 5 with 4x 2TB disks on Debian 6. I followed the instructions from: http://zackreed.me/articles/38-software-raid-5-in-debian-with-mdadm I created the raid with following command: sudo mdadm --create --verbose /dev/md0 --auto=yes --level=5 --raid-devices=4 /dev/sdb1 /dev/sdc1 /dev/sdd1 /dev/sde1 After creating the RAID mdadm --detail /dev/md0 shows me: /dev/md0: Version : 1.2 Creation Time : Mon Jun 11 18:14:26 2012 Raid Level : raid5 Array Size : 5860535808 (5589.04 GiB 6001.19 GB) Used Dev Size : 1953511936 (1863.01 GiB 2000.40 GB) Raid Devices : 4 Total Devices : 4 Persistence : Superblock is persistent Update Time : Mon Jun 11 18:14:26 2012 State : clean, degraded Active Devices : 3 Working Devices : 4 Failed Devices : 0 Spare Devices : 1 Layout : left-symmetric Chunk Size : 512K Name : rsserver:0 (local to host rsserver) UUID : a68c3c99:1ef865e9:5a8a7bdc:64710ed8 Events : 0 Number Major Minor RaidDevice State 0 8 17 0 active sync /dev/sdb1 1 8 33 1 active sync /dev/sdc1 2 8 49 2 active sync /dev/sdd1 3 0 0 3 removed 4 8 65 - spare /dev/sde1 Why is there a spare drive? I didn't create one. I don't want to use a spare drive.

    Read the article

  • stack dump accessing malloc char array

    - by robUK
    Hello, gcc 4.4.3 c89 I have the following source code. And getting a stack dump on the printf. char **devices; devices = malloc(10 * sizeof(char*)); strcpy(devices[0], "smxxxx1"); printf("[ %s ]\n", devices[0]); /* Stack dump trying to print */ I am thinking that this should create an char array like this. devices[0] devices[1] devices[2] devices[4] etc And each element I can store my strings. Many thanks for any suggestions,

    Read the article

< Previous Page | 29 30 31 32 33 34 35 36 37 38 39 40  | Next Page >