Search Results

Search found 955 results on 39 pages for 'gpu accelration'.

Page 33/39 | < Previous Page | 29 30 31 32 33 34 35 36 37 38 39  | Next Page >

• Does the Intel DX79TO motherboard support x8 devices (SAS HBAs) on PCIe x16 slots?

  - by Zac B

  Context: I have an Intel DX79TO motherboard and a Sun SAS3081E-S/LSI 1060E-S HBA card with a PCIe x8 interface. I plug the HBA into my mobo next to my graphics card, and the HBA power lights illuminate, but the BIOS and OSes (tried Linux, ESXi, Win7) don't see the HBA at all. Question: Does the DX79TO motherboard support non-x16/non-GPU devices in its PCIe x16 slots? According to this question, some consumer motherboards don't support this, but I can't figure out whether or not this motherboard/family does. The answer will affect whether I buy a new motherboard or RMA the SAS card, with money attached to each course, so I figured I'd ask here first. What I've Tried: I've read the spec/manuals for the motherboard and the HBA, and I didn't see anything regarding whether or not the x16 slots were back-compatible to lower lane widths/non graphics-card devices, or whether or not the card could run in wider slots than x8. I've tried contacting Intel, but that was over a month ago and I haven't yet heard anything back except an automated "we got your email!" message.

  Read the article

• How do I resolve BSOD: PAGE_FAULT_IN_NONPAGED_AREA?

  - by Burnzy

  I have been trouble shooting this for a few days and cannot fix this anyhow. Computer specifications Mobo: ASUS Sabertooth X58 LGA 1366 Intel X58 SATA 6Gb/s USB 3.0 ATX Intel Motherboard CPU: Intel(R) Core(TM) i7 CPU 920 (Bloomfield) @ 2.67 ( no OC ) RAM: 6144MB RAM GPU: 2x NVIDIA GeForce GTS 250 1Go in SLI (sli is not enabled anyway at the moment anyway) Drives: OCZ RevoDrive OCZSSDPX-1RVD0120 PCI-E x4 120GB PCI Express MLC Internal SSD [RAID-0]. (I know this could potentilly cause trouble but I had the BSOD before using this drive) Seagate Barracuda 7200.11 ST31500341AS 1.5TB 7200 RPM 32MB Cache SATA 3.0Gb/s 3.5" Internal Hard Drive - Bare Drive Click here for a log of a crash I just had. Click here for a log of a crash I had 30 minutes later, note that it's another driver. Some info Occurence: It seems pretty random so far, haven't noticed any kind of pattern I tried: Windows memory diagnostic (went smoothly at 1066mhz) As I said, it was still happening on my HDD, so when I bought the revodrive I install a new OS on there and still got the error, I believed it happened and I had no drivers installed at that point (not 100% sure) Change the following registry value to 1 (true): HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SessionManager \MemoryManagement\ClearPageFileAtShutdown Tried to lower even more ram clock Made sure ram timing was set to recommended by manufacturer Verified if motherboard was in good physical condition (yes and its brand new) There is one thing to note, when I got the new motherboard, I installed the new drivers WITHOUT formatting and the I removed the motherboard drivers that I could remove from the control panel (pretty much the first things that have been installed). Could this cause an issue even ON THE OTHER drive (revodrive). Hopefully someone can help me, I am getting tired of this, spending so much money and cannot get this to work correctly. If you need any other information let me know, thank you!

  Read the article

• S5000XVN Intel Motherboard - Only sees 12 out of 16GB of RAM

  - by Richie086

  So I have an older Intel S5000XVN motherboard, here are the specs CPU Arch : 2 CPU - 2 Cores - 2 Threads CPU PSN : Intel Xeon CPU 5160 @ 3.00GHz CPU EXT : MMX, SSE (1, 2, 3, 3S), EM64T, VT-x CPUID : 6.F.6 / Extended : 6.F CPU Cache : L1 : 2 x 32 / 2 x 32 KB - L2 : 4096 KB Core : Woodcrest (65 nm) / Stepping : B2 Freq : 2985.21 MHz (331.69 * 9) MB Brand : Intel MB Model : S5000XVN NB : Intel 5000X rev 31 SB : Intel 6321ESB rev 09 RAM : 16384 MB FB-DDR2 RAM Speed : 331.7 MHz (1:1) @ N/A Slot 1 : 2048MB (5300) Slot 1 Manufacturer : Kingston Slot 2 : 2048MB (5300) Slot 2 Manufacturer : Qimonda Slot 3 : 2048MB (5300) Slot 3 Manufacturer : Kingston Slot 4 : 2048MB (5300) Slot 4 Manufacturer : Qimonda Slot 5 : 2048MB (5300) Slot 5 Manufacturer : Kingston Slot 6 : 2048MB (5300) Slot 6 Manufacturer : Qimonda As you can clearly see, CPU-Z says I have 16GB of PC2-5300 RAM installed. For some reason in both BIOS and in Windows the maximum usable RAM is 12GB instead of 16GB. I have a dedicated video card connnected, so it can't be stealing RAM to use for the GPU (the S5000XVN does not have any onboard video). I am running Windows Server 2008 R2 x64 as the primary OS - so there should not be a memory limitation imposed on me from the OS. Has anyone experienced this before? Any ideas on how I can actually use all 16GB of RAM? I plan on using this machine to use for a Hyper-V server and have x2 Quad Core Xeon CPUs on the way as I write this post.

  Read the article

• Tooltips shadow stuck on desktop

  - by faulty

  I tends to get this problem from time to time. The tooltips with a shadow appearing on top of everything. It's the shadow of the tooltips not disappearing after the tooltips disappear. The last one I had the tooltips was from the wifi connection list at the systray. This problem also happen to me on another computer. Both running Win7 with ATI gpu. I found this similar post Menu command stuck on screen but none of the solution helped. In fact the "Fade or slide tooltips into view" has been unchecked from the beginning. Ending task of "dwm.exe" also doesn't help. So far the only way to resolve this by restarting window. I can't post picture yet, so can't show any screenshot. Edit: Just tested a few more trick which doesn't work. 1. Turn of aero 2. Hibernate 3. Switch main display to external display and switch back. 4. Change resolution

  Read the article

• Flash alternative for iBook Mac?

  - by Hunter Dolan

  I have a old Apple iBook G4 that I decided to hook up to my main TV. I like the setup because I can surf the internet on my TV now. The only thing that I can't seem to do is watch Flash videos. Apparently Flash Player 10 doesn't play nice with the iBook's graphics card's GPU, leaving all the graphics processing to the CPU which is a disaster. Others suggested downgrading to Flash Player 9, I did that, and youtube worked fine, but Hulu (The main reason I wanted to hook it up to the TV in the first place) did not. Anyone know of a Flash alternative or a Flash 10 fix for the iBook? Or even a Hulu client that doesn't require Flash. Here are my iBook's Specs Model Name: iBook G4 <br> Model Identifier: PowerBook6,5 <br> Processor Name: PowerPC G4 (1.2) <br> Processor Speed: 1.2 GHz <br> Number Of CPUs: 1 <br> L2 Cache (per CPU): 512 KB <br> Memory: 512 MB <br> Bus Speed: 133 MHz <br> Boot ROM Version: 4.8.7f1 <br> Mac OS X Version: 10.5.8 <br> PS: Don't tell me that I need to buy a new computer. I know that I would have better results with a new computer but I don't want to buy a new computer just for Hulu.

  Read the article

• Are HDMI to VGA Adapters Really Device-Specific?

  - by allquixotic

  There are a lot of devices on the market right now (especially mobile devices) with a Micro-HDMI or Mini-HDMI port and no VGA or D-Sub output. Most manufacturers of said devices sell a cable that looks something like this: I have yet to find a cable like this that claims to work on a wide array of devices. In general, these cables claim to work with one specific device only. The way these cables work, I think, is that analog VGA signals are sent from the HDMI port on the device. This should work for devices that have special hardware on the motherboard/GPU capable of driving this. Is it the case that these cables have to be custom designed for each device? Or, is it rather that any device which possesses this special "signaling of analog VGA over the HDMI port" can be made to work with a cable that is physically compatible (i.e. the HDMI end plugs into the device and the VGA end accepts a VGA monitor cable)? Note that I am not looking for a product recommendation, just a conceptual clarification on what exactly these devices are doing. Also, a few remarks: The cables like the one depicted here are not digital to analog converters. I know about these: they are expensive, and they are the ONLY solution if your device only outputs a digital signal and is incapable of driving analog VGA over the HDMI port. The cables like the one depicted here are not straight crossover cables from VGA to HDMI, either. The crossover cables are designed to send a digital HDMI signal over the VGA port's wires; that is, the wire protocol is HDMI (digital) but the physical pinout is the same as VGA, even though nothing analog is happening. Once again, this is not the behavior that, I believe, the devices which I'm talking about in this question are doing. The cabling and devices that this question is about transmit the analog VGA data over the HDMI port (the HDMI port is in the device outputting the data, and the VGA side is the monitor/projector).

  Read the article

• Using native resolution on external display results in stretched, out of bounds image

  - by Roni Yaniv

  I have an HP min 311 netbook with Windows XP, which I've connected to a Samsung SyncMaster 2043BW display via the supplied analog cable. The external display's native res is 1680x1050, which the netbook's ION GPU supports. I've configured the external display as the single display (no cloning or any such fancy stuff). However, once I set the native res, the image just stretches out. It looks squashed, and it goes outside the monitor's edges. In contrast, lower resolutions manage to stay within the monitor's display edges, though obviously they are skewed in some way (vertically or horizontally). BTW, the only res which seems to be displayed relatively clearly (it's the least blurry) is 1280x720. I tried looking all over the web for an explanation/advice but could not find any. I already played with the settings on the external display itself several times. So either it's not that, or I missed something. Has someone run into this issue? I need help.

  Read the article

• When gaming computer freezes with a blank screen and a buzzing sound

  - by The Colour Of Heartache

  I have a problem with random freezes when playing games. Sometimes it's fine for hours, other times it dosn't last even one. I tried googling around and I found recomendations to update my graphics drivers and to test for overheating. The graphics drivers haven't helped worked and Furmark created a consistant heat higher than I get during a crash. I even tried running a game using the Linux dual boot and WINE, that crashed too. Here are the tempreture logs leading up to the latest crash. The GPU dosn't hit 80, and I've hit 90 with no crash on firmark. DATE TIME MHz CPU_0 CPU_1 CPU_2 CPU_3 LOAD% GPU 04/05/12 15:21:00 3200.16 63 58 57 56 15.4 77 04/05/12 15:21:05 3200.16 63 59 58 56 15.8 76 04/05/12 15:21:10 3200.16 62 59 58 55 15.1 78 04/05/12 15:21:15 3200.16 63 59 58 56 16.5 77 04/05/12 15:21:20 3200.16 64 58 58 57 15.3 77 04/05/12 15:21:25 3200.16 63 58 59 56 15.8 78 04/05/12 15:21:30 3200.16 63 58 58 57 15.8 77 04/05/12 15:21:35 3200.16 63 58 58 56 17.0 77 04/05/12 15:21:40 3200.16 63 59 59 56 15.9 77 04/05/12 15:21:45 3200.16 63 58 58 58 15.6 77 04/05/12 15:21:50 3200.16 63 58 58 58 15.8 77 04/05/12 15:21:55 3200.16 63 58 59 56 15.9 77 04/05/12 15:22:00 3200.16 63 58 58 57 15.8 77 04/05/12 15:21:05 3200.16 63 58 58 56 15.9 77 04/05/12 15:21:10 3200.16 63 57 58 56 15.3 78 04/05/12 15:21:15 3200.16 64 58 58 56 15.4 78 04/05/12 15:21:20 3200.16 63 58 58 56 15.4 77 04/05/12 15:21:25 3200.16 62 58 58 57 15.6 77 04/05/12 15:21:30 3200.16 62 58 58 57 15.8 77 04/05/12 15:21:35 3200.16 63 59 58 56 15.9 77 04/05/12 15:21:40 3200.16 63 58 58 56 15.9 77 04/05/12 15:21:45 3200.16 63 59 58 56 15.6 77 04/05/12 15:21:50 3200.16 62 59 58 58 15.8 77 04/05/12 15:21:55 3200.16 63 58 58 57 15.9 77 04/05/12 15:22:00 3200.16 63 58 58 56 15.9 77 04/05/12 15:22:05 3200.16 63 58 58 56 16.3 77 04/05/12 15:22:10 3200.16 64 58 59 56 15.7 77 04/05/12 15:22:15 3200.16 63 58 60 57 17.2 77 04/05/12 15:22:20 3200.16 63 58 58 56 15.5 78 04/05/12 15:22:25 3200.16 63 58 60 57 15.9 77 04/05/12 15:22:30 3200.16 63 59 59 57 15.6 76 04/05/12 15:22:35 3200.16 64 59 60 57 17.7 77 04/05/12 15:22:40 3200.16 63 59 58 57 16.0 77 04/05/12 15:22:45 3200.16 64 58 58 57 15.8 77 04/05/12 15:22:50 3200.16 63 59 58 56 15.8 77 04/05/12 15:22:55 3200.16 63 58 59 57 15.8 78 04/05/12 15:23:00 3200.16 63 59 58 57 15.7 77 04/05/12 15:22:05 3200.16 62 58 57 58 15.9 77 04/05/12 15:22:10 3200.16 63 58 59 57 15.9 77 04/05/12 15:22:15 3200.16 63 59 58 56 17.1 77 04/05/12 15:22:20 3200.16 63 58 59 57 16.0 77 04/05/12 15:22:25 3200.16 63 58 58 57 15.9 77 04/05/12 15:22:30 3200.16 63 59 59 57 15.7 77 04/05/12 15:22:35 3200.16 64 59 58 58 21.0 77 04/05/12 15:22:40 3200.16 63 59 58 58 16.0 77 04/05/12 15:22:45 3200.16 64 59 59 57 15.7 77 04/05/12 15:22:50 3200.16 63 59 58 56 15.8 78 04/05/12 15:22:55 3200.16 63 59 58 57 15.8 78 04/05/12 15:23:00 3200.16 63 59 57 57 15.9 77 04/05/12 15:23:05 3200.16 64 58 58 58 15.7 77 04/05/12 15:23:10 3200.16 63 59 58 56 15.9 77 04/05/12 15:23:15 3200.16 64 59 58 57 16.6 77 04/05/12 15:23:20 3200.16 63 59 58 58 16.0 77 04/05/12 15:23:25 3200.16 63 58 58 57 15.7 77 04/05/12 15:23:30 3200.16 63 59 58 56 15.4 78 04/05/12 15:23:35 3200.16 64 60 59 61 17.7 77 04/05/12 15:23:40 3200.16 63 59 58 57 15.6 77 04/05/12 15:23:45 1600.08 53 54 53 52 4.4 76 04/05/12 15:23:50 3200.16 63 59 57 56 15.8 77 04/05/12 15:23:55 3200.16 63 58 57 57 15.6 77 04/05/12 15:24:00 3200.16 63 58 58 58 15.9 77 04/05/12 15:23:05 3200.16 64 59 58 56 15.6 77 04/05/12 15:23:10 3200.16 64 59 58 57 15.9 77 04/05/12 15:23:15 3200.16 63 59 58 59 16.7 77 04/05/12 15:23:20 3200.16 64 58 58 58 16.0 77 04/05/12 15:23:25 3200.16 64 58 58 57 15.7 77 04/05/12 15:23:30 3200.16 64 58 58 57 15.2 78 04/05/12 15:23:35 3200.16 63 59 59 58 17.8 77 04/05/12 15:23:40 3200.16 63 59 59 58 15.8 77 04/05/12 15:23:45 1600.08 53 54 53 52 4.7 76 04/05/12 15:23:50 3200.16 63 59 57 56 16.9 77 04/05/12 15:23:55 3200.16 63 58 59 56 15.7 77 04/05/12 15:24:00 3200.16 63 58 59 57 15.9 77 I also got a dmp file, here's what BlueScreenView gave me. The first three lines were in red, the summery says that the crash was casued by hal.dll and the address hal.dll+12903 Filename Address in Stack From Address To Address Size Time Stamp Time String Product Name File Description File Version Company Full Path hal.dll hal.dll+12903 fffff800`033e0000 fffff800`03429000 0x00049000 0x4a5bdf08 14/07/2009 02:27:36 ntoskrnl.exe ntoskrnl.exe+185923 fffff800`02e05000 fffff800`033e0000 0x005db000 0x4ec7a284 19/11/2011 13:35:16 Microsoft® Windows® Operating System NT Kernel & System 6.1.7600.16917 (win7_gdr.111118-2330) Microsoft Corporation C:\Windows\system32\ntoskrnl.exe pci.sys pci.sys+9aff fffff880`0108f000 fffff880`010c2000 0x00033000 0x4a5bc117 14/07/2009 00:19:51 kdcom.dll fffff800`00bc4000 fffff800`00bce000 0x0000a000 0x4d4d40d9 05/02/2011 13:21:45 mcupdate_GenuineIntel.dll fffff880`00c26000 fffff880`00c6a000 0x00044000 0x4a5bdf66 14/07/2009 02:29:10 PSHED.dll fffff880`00c6a000 fffff880`00c7e000 0x00014000 0x4a5be027 14/07/2009 02:32:23 Microsoft® Windows® Operating System Platform Specific Hardware Error Driver 6.1.7600.16385 (win7_rtm.090713-1255) Microsoft Corporation C:\Windows\system32\PSHED.dll CLFS.SYS fffff880`00c7e000 fffff880`00cdc000 0x0005e000 0x4a5bc11d 14/07/2009 00:19:57 CI.dll fffff880`00cdc000 fffff880`00d9c000 0x000c0000 0x4a5be01d 14/07/2009 02:32:13 Wdf01000.sys fffff880`00e0e000 fffff880`00eb2000 0x000a4000 0x4a5bc19f 14/07/2009 00:22:07 WDFLDR.SYS fffff880`00eb2000 fffff880`00ec1000 0x0000f000 0x4a5bc11a 14/07/2009 00:19:54 sptd.sys fffff880`00ec1000 fffff880`00fe7000 0x00126000 0x4ad24632 11/10/2009 21:55:14 WMILIB.SYS fffff880`00fe7000 fffff880`00ff0000 0x00009000 0x4a5bc117 14/07/2009 00:19:51 SCSIPORT.SYS fffff880`00d9c000 fffff880`00dcb000 0x0002f000 0x4a5bcac0 14/07/2009 01:01:04 ACPI.sys fffff880`01021000 fffff880`01078000 0x00057000 0x4a5bc106 14/07/2009 00:19:34 msisadrv.sys fffff880`01078000 fffff880`01082000 0x0000a000 0x4a5bc0fe 14/07/2009 00:19:26 vdrvroot.sys fffff880`01082000 fffff880`0108f000 0x0000d000 0x4a5bcadb 14/07/2009 01:01:31 partmgr.sys fffff880`010c2000 fffff880`010d7000 0x00015000 0x4a5bc11e 14/07/2009 00:19:58 volmgr.sys fffff880`010d7000 fffff880`010ec000 0x00015000 0x4a5bc11d 14/07/2009 00:19:57 volmgrx.sys fffff880`010ec000 fffff880`01148000 0x0005c000 0x4a5bc141 14/07/2009 00:20:33 pciide.sys fffff880`01148000 fffff880`0114f000 0x00007000 0x4a5bc115 14/07/2009 00:19:49 PCIIDEX.SYS fffff880`0114f000 fffff880`0115f000 0x00010000 0x4a5bc114 14/07/2009 00:19:48 mountmgr.sys fffff880`0115f000 fffff880`01179000 0x0001a000 0x4a5bc11a 14/07/2009 00:19:54 atapi.sys fffff880`01179000 fffff880`01182000 0x00009000 0x4a5bc113 14/07/2009 00:19:47 ataport.SYS fffff880`01182000 fffff880`011ac000 0x0002a000 0x4a5bc118 14/07/2009 00:19:52 msahci.sys fffff880`011ac000 fffff880`011b7000 0x0000b000 0x4a5bcabd 14/07/2009 01:01:01 amdxata.sys fffff880`011b7000 fffff880`011c2000 0x0000b000 0x4ba3a3ca 19/03/2010 17:18:18 fltmgr.sys fffff880`01211000 fffff880`0125d000 0x0004c000 0x4a5bc11f 14/07/2009 00:19:59 fileinfo.sys fffff880`0125d000 fffff880`01271000 0x00014000 0x4a5bc481 14/07/2009 00:34:25 Ntfs.sys fffff880`0145c000 fffff880`015fe000 0x001a2000 0x4d79996d 11/03/2011 04:39:25 msrpc.sys fffff880`01271000 fffff880`012cf000 0x0005e000 0x4a5bc17c 14/07/2009 00:21:32 ksecdd.sys fffff880`01400000 fffff880`0141a000 0x0001a000 0x4ec48579 17/11/2011 04:54:33 cng.sys fffff880`012cf000 fffff880`01342000 0x00073000 0x4ec48cfb 17/11/2011 05:26:35 pcw.sys fffff880`0141a000 fffff880`0142b000 0x00011000 0x4a5bc0ff 14/07/2009 00:19:27 Fs_Rec.sys fffff880`0142b000 fffff880`01435000 0x0000a000 0x4a5bc111 14/07/2009 00:19:45 ndis.sys fffff880`01653000 fffff880`01745000 0x000f2000 0x4a5bc184 14/07/2009 00:21:40 NETIO.SYS fffff880`01745000 fffff880`017a5000 0x00060000 0x4bbe946f 09/04/2010 03:43:59 ksecpkg.sys fffff880`017a5000 fffff880`017d0000 0x0002b000 0x4ec48d32 17/11/2011 05:27:30 tcpip.sys fffff880`01802000 fffff880`01a00000 0x001fe000 0x4e83eb7f 29/09/2011 04:52:31 fwpkclnt.sys fffff880`01600000 fffff880`0164a000 0x0004a000 0x4a5bc164 14/07/2009 00:21:08 vmstorfl.sys fffff880`017d0000 fffff880`017e0000 0x00010000 0x4a5bc67e 14/07/2009 00:42:54 volsnap.sys fffff880`01342000 fffff880`0138e000 0x0004c000 0x4a5bc128 14/07/2009 00:20:08 spldr.sys fffff880`017e0000 fffff880`017e8000 0x00008000 0x4a0858bb 11/05/2009 17:56:27 rdyboost.sys fffff880`0138e000 fffff880`013c8000 0x0003a000 0x4a5bc48a 14/07/2009 00:34:34 mup.sys fffff880`017e8000 fffff880`017fa000 0x00012000 0x4a5bc201 14/07/2009 00:23:45 hwpolicy.sys fffff880`0164a000 fffff880`01653000 0x00009000 0x4a5bc0fa 14/07/2009 00:19:22 fvevol.sys fffff880`011c2000 fffff880`011fc000 0x0003a000 0x4abd7db2 26/09/2009 03:34:26 disk.sys fffff880`01435000 fffff880`0144b000 0x00016000 0x4a5bc11d 14/07/2009 00:19:57 CLASSPNP.SYS fffff880`013c8000 fffff880`013f8000 0x00030000 0x4a5bc11e 14/07/2009 00:19:58 cdrom.sys fffff880`00dcb000 fffff880`00df5000 0x0002a000 0x4a5bc11a 14/07/2009 00:19:54 MpFilter.sys fffff880`02c1a000 fffff880`02c4b000 0x00031000 0x4d9cc801 06/04/2011 21:07:29 Null.SYS fffff880`02c4b000 fffff880`02c54000 0x00009000 0x4a5bc109 14/07/2009 00:19:37 Beep.SYS fffff880`02c54000 fffff880`02c5b000 0x00007000 0x4a5bca8d 14/07/2009 01:00:13 vga.sys fffff880`02c5b000 fffff880`02c69000 0x0000e000 0x4a5bc587 14/07/2009 00:38:47 VIDEOPRT.SYS fffff880`02c69000 fffff880`02c8e000 0x00025000 0x4a5bc58b 14/07/2009 00:38:51 watchdog.sys fffff880`02c8e000 fffff880`02c9e000 0x00010000 0x4a5bc53f 14/07/2009 00:37:35 RDPCDD.sys fffff880`02c9e000 fffff880`02ca7000 0x00009000 0x4a5bce62 14/07/2009 01:16:34 rdpencdd.sys fffff880`02ca7000 fffff880`02cb0000 0x00009000 0x4a5bce62 14/07/2009 01:16:34 rdprefmp.sys fffff880`02cb0000 fffff880`02cb9000 0x00009000 0x4a5bce63 14/07/2009 01:16:35 Msfs.SYS fffff880`02cb9000 fffff880`02cc4000 0x0000b000 0x4a5bc113 14/07/2009 00:19:47 Npfs.SYS fffff880`02cc4000 fffff880`02cd5000 0x00011000 0x4a5bc114 14/07/2009 00:19:48 tdx.sys fffff880`02cd5000 fffff880`02cf3000 0x0001e000 0x4a5bc16b 14/07/2009 00:21:15 TDI.SYS fffff880`02cf3000 fffff880`02d00000 0x0000d000 0x4a5bc16e 14/07/2009 00:21:18 afd.sys fffff880`02d00000 fffff880`02d89000 0x00089000 0x4efa940c 28/12/2011 04:59:08 netbt.sys fffff880`02d89000 fffff880`02dce000 0x00045000 0x4a5bc178 14/07/2009 00:21:28 ws2ifsl.sys fffff880`02dce000 fffff880`02dd9000 0x0000b000 0x4a5bccf9 14/07/2009 01:10:33 wfplwf.sys fffff880`02dd9000 fffff880`02de2000 0x00009000 0x4a5bccb6 14/07/2009 01:09:26 pacer.sys fffff880`00c00000 fffff880`00c26000 0x00026000 0x4a5bccc5 14/07/2009 01:09:41 vpcnfltr.sys fffff880`02de2000 fffff880`02df6000 0x00014000 0x4ab97aae 23/09/2009 02:32:30 netbios.sys fffff880`02c00000 fffff880`02c0f000 0x0000f000 0x4a5bccb6 14/07/2009 01:09:26 serial.sys fffff880`04075000 fffff880`04092000 0x0001d000 0x4a5bcaa8 14/07/2009 01:00:40 wanarp.sys fffff880`04092000 fffff880`040ad000 0x0001b000 0x4a5bcced 14/07/2009 01:10:21 vpcvmm.sys fffff880`040ad000 fffff880`04103180 0x00056180 0x4ab97ab6 23/09/2009 02:32:38 termdd.sys fffff880`04104000 fffff880`04118000 0x00014000 0x4a5bce64 14/07/2009 01:16:36 rdbss.sys fffff880`04118000 fffff880`04169000 0x00051000 0x4a5bc219 14/07/2009 00:24:09 nsiproxy.sys fffff880`04169000 fffff880`04175000 0x0000c000 0x4a5bc15e 14/07/2009 00:21:02 mssmbios.sys fffff880`04175000 fffff880`04180000 0x0000b000 0x4a5bc3be 14/07/2009 00:31:10 discache.sys fffff880`04180000 fffff880`0418f000 0x0000f000 0x4a5bc52e 14/07/2009 00:37:18 csc.sys fffff880`04280000 fffff880`04303000 0x00083000 0x4a5bc22a 14/07/2009 00:24:26 dfsc.sys fffff880`04303000 fffff880`04321000 0x0001e000 0x4db78623 27/04/2011 03:57:39 blbdrive.sys fffff880`04321000 fffff880`04332000 0x00011000 0x4a5bc4df 14/07/2009 00:35:59 tunnel.sys fffff880`04332000 fffff880`04358000 0x00026000 0x4a5bccc1 14/07/2009 01:09:37 intelppm.sys fffff880`04358000 fffff880`0436e000 0x00016000 0x4a5bc0fd 14/07/2009 00:19:25 nvlddmkm.sys fffff880`0fe34000 fffff880`10b52000 0x00d1e000 0x4f4e68c4 29/02/2012 19:04:52 nvBridge.kmd fffff880`10b52000 fffff880`10b53180 0x00001180 0x4d27c482 08/01/2011 02:57:22 dxgkrnl.sys fffff880`04450000 fffff880`04544000 0x000f4000 0x4d3fa1a0 26/01/2011 05:22:56 dxgmms1.sys fffff880`04544000 fffff880`0458a000 0x00046000 0x4d3fa174 26/01/2011 05:22:12 usbuhci.sys fffff880`0458a000 fffff880`04597000 0x0000d000 0x4d8c0a8f 25/03/2011 04:22:55 USBPORT.SYS fffff880`04597000 fffff880`045ed000 0x00056000 0x4d8c0a97 25/03/2011 04:23:03 usbehci.sys fffff880`045ed000 fffff880`045fe000 0x00011000 0x4d8c0a91 25/03/2011 04:22:57 HDAudBus.sys fffff880`04400000 fffff880`04424000 0x00024000 0x4a5bcbf5 14/07/2009 01:06:13 1394ohci.sys fffff880`10b54000 fffff880`10b92000 0x0003e000 0x4a5bcc30 14/07/2009 01:07:12 Rt64win7.sys fffff880`10b92000 fffff880`10bc4000 0x00032000 0x49a65b0d 26/02/2009 10:04:13 i8042prt.sys fffff880`04424000 fffff880`04442000 0x0001e000 0x4a5bc11d 14/07/2009 00:19:57 kbdclass.sys fffff880`10bc4000 fffff880`10bd3000 0x0000f000 0x4a5bc116 14/07/2009 00:19:50 VMkbd.sys fffff880`04442000 fffff880`0444d000 0x0000b000 0x4b5a836f 23/01/2010 06:04:47 serenum.sys fffff880`10bd3000 fffff880`10bdf000 0x0000c000 0x4a5bcaa1 14/07/2009 01:00:33 av1shsvl.SYS fffff880`0436e000 fffff880`043b3000 0x00045000 0x4a5cf4d7 14/07/2009 22:12:55 wmiacpi.sys fffff880`10bdf000 fffff880`10be8000 0x00009000 0x4a5bc3b6 14/07/2009 00:31:02 CompositeBus.sys fffff880`10be8000 fffff880`10bf8000 0x00010000 0x4a5bcaa1 14/07/2009 01:00:33 AgileVpn.sys fffff880`0fe00000 fffff880`0fe16000 0x00016000 0x4a5bccf0 14/07/2009 01:10:24 rasl2tp.sys fffff880`043b3000 fffff880`043d7000 0x00024000 0x4a5bcce3 14/07/2009 01:10:11 ndistapi.sys fffff880`0fe16000 fffff880`0fe22000 0x0000c000 0x4a5bccd8 14/07/2009 01:10:00 ndiswan.sys fffff880`04200000 fffff880`0422f000 0x0002f000 0x4a5bcce3 14/07/2009 01:10:11 raspppoe.sys fffff880`0422f000 fffff880`0424a000 0x0001b000 0x4a5bcce9 14/07/2009 01:10:17 raspptp.sys fffff880`0424a000 fffff880`0426b000 0x00021000 0x4a5bccea 14/07/2009 01:10:18 rassstp.sys fffff880`043d7000 fffff880`043f1000 0x0001a000 0x4a5bccf1 14/07/2009 01:10:25 tapoas.sys fffff880`0fe22000 fffff880`0fe2f000 0x0000d000 0x4c3a627f 12/07/2010 01:31:59 tap0901.sys fffff880`043f1000 fffff880`043fe000 0x0000d000 0x4b22da33 12/12/2009 00:48:03 rdpbus.sys fffff880`0426b000 fffff880`04276000 0x0000b000 0x4a5bceaa 14/07/2009 01:17:46 mouclass.sys fffff880`0418f000 fffff880`0419e000 0x0000f000 0x4a5bc116 14/07/2009 00:19:50 swenum.sys fffff880`0444d000 fffff880`0444e480 0x00001480 0x4a5bca92 14/07/2009 01:00:18 ks.sys fffff880`0419e000 fffff880`041e1000 0x00043000 0x4b8f37d9 04/03/2010 05:32:25 umbus.sys fffff880`041e1000 fffff880`041f3000 0x00012000 0x4a5bcc20 14/07/2009 01:06:56 vpcusb.sys fffff880`04000000 fffff880`0401d000 0x0001d000 0x4ab97ab7 23/09/2009 02:32:39 usbrpm.sys fffff880`0401d000 fffff880`0402c000 0x0000f000 0x4a5bd2c2 14/07/2009 01:35:14 USBD.SYS fffff880`045fe000 fffff880`045fff00 0x00001f00 0x4d8c0a8b 25/03/2011 04:22:51 vmnetadapter.sys fffff880`10bf8000 fffff880`10c00000 0x00008000 0x4a800ce5 10/08/2009 13:04:53 VMNET.SYS fffff880`04276000 fffff880`04280000 0x0000a000 0x4a800ce2 10/08/2009 13:04:50 vpchbus.sys fffff880`0402c000 fffff880`04068000 0x0003c000 0x4ab97ab0 23/09/2009 02:32:32 usbhub.sys fffff880`04c26000 fffff880`04c80000 0x0005a000 0x4d8c0aaa 25/03/2011 04:23:22 NDProxy.SYS fffff880`04c80000 fffff880`04c95000 0x00015000 0x4a5bccdd 14/07/2009 01:10:05 HdAudio.sys fffff880`04c95000 fffff880`04cf1000 0x0005c000 0x4a5bcc23 14/07/2009 01:06:59 portcls.sys fffff880`04cf1000 fffff880`04d2e000 0x0003d000 0x4a5bcc03 14/07/2009 01:06:27 drmk.sys fffff880`04d2e000 fffff880`04d50000 0x00022000 0x4a5bd8e5 14/07/2009 02:01:25 ksthunk.sys fffff880`04d50000 fffff880`04d55200 0x00005200 0x4a5bca93 14/07/2009 01:00:19 win32k.sys fffff960`000c0000 fffff960`003d4000 0x00314000 0x00000000 Dxapi.sys fffff880`04d56000 fffff880`04d62000 0x0000c000 0x4a5bc574 14/07/2009 00:38:28 udfs.sys fffff880`04d62000 fffff880`04db6000 0x00054000 0x4a5bc1f9 14/07/2009 00:23:37 monitor.sys fffff880`04db6000 fffff880`04dc4000 0x0000e000 0x4a5bc58c 14/07/2009 00:38:52 TSDDD.dll fffff960`004c0000 fffff960`004ca000 0x0000a000 0x00000000 hidusb.sys fffff880`04dc4000 fffff880`04dd2000 0x0000e000 0x4a5bcbfe 14/07/2009 01:06:22 HIDCLASS.SYS fffff880`04dd2000 fffff880`04deb000 0x00019000 0x4a5bcbfd 14/07/2009 01:06:21 HIDPARSE.SYS fffff880`04deb000 fffff880`04df3080 0x00008080 0x4a5bcbf9 14/07/2009 01:06:17 cdd.dll fffff960`00660000 fffff960`00687000 0x00027000 0x00000000 mouhid.sys fffff880`04c00000 fffff880`04c0d000 0x0000d000 0x4a5bca94 14/07/2009 01:00:20 luafv.sys fffff880`05a78000 fffff880`05a9b000 0x00023000 0x4a5bc295 14/07/2009 00:26:13 WudfPf.sys fffff880`05a9b000 fffff880`05abc000 0x00021000 0x4a5bcbd1 14/07/2009 01:05:37 crashdmp.sys fffff880`05abc000 fffff880`05aca000 0x0000e000 0x4a5bcabd 14/07/2009 01:01:01 dump_dumpata.sys fffff880`05aca000 fffff880`05ad6000 0x0000c000 0x4a5bc113 14/07/2009 00:19:47 dump_msahci.sys fffff880`05ad6000 fffff880`05ae1000 0x0000b000 0x4a5bcabd 14/07/2009 01:01:01 dump_dumpfve.sys fffff880`05ae1000 fffff880`05af4000 0x00013000 0x4a5bc18f 14/07/2009 00:21:51 vmnetbridge.sys fffff880`05af4000 fffff880`05b04000 0x00010000 0x4a800d26 10/08/2009 13:05:58 lltdio.sys fffff880`05b04000 fffff880`05b19000 0x00015000 0x4a5bcc92 14/07/2009 01:08:50 rspndr.sys fffff880`05b19000 fffff880`05b31000 0x00018000 0x4a5bcc92 14/07/2009 01:08:50 HTTP.sys fffff880`05b31000 fffff880`05bf9000 0x000c8000 0x4a5bc1a8 14/07/2009 00:22:16 bowser.sys fffff880`05a00000 fffff880`05a1e000 0x0001e000 0x4d6497da 23/02/2011 06:15:06 mpsdrv.sys fffff880`05a1e000 fffff880`05a36000 0x00018000 0x4a5bcc79 14/07/2009 01:08:25 mrxsmb.sys fffff880`05a36000 fffff880`05a63000 0x0002d000 0x4dc0bf1a 04/05/2011 03:51:06 mrxsmb10.sys fffff880`066ce000 fffff880`0671c000 0x0004e000 0x4e17c0a7 09/07/2011 03:44:55 mrxsmb20.sys fffff880`0671c000 fffff880`0673f000 0x00023000 0x4dc0bf19 04/05/2011 03:51:05 hcmon.sys fffff880`0673f000 fffff880`0674b000 0x0000c000 0x4b5a765b 23/01/2010 05:08:59 vmci.sys fffff880`0674b000 fffff880`06763000 0x00018000 0x4b5a6e03 23/01/2010 04:33:23 vmx86.sys fffff880`06896000 fffff880`0696c000 0x000d6000 0x4b5a8e0d 23/01/2010 06:50:05 MpNWMon.sys fffff880`0696c000 fffff880`0697c000 0x00010000 0x4d9cc7fb 06/04/2011 21:07:23 peauth.sys fffff880`06600000 fffff880`066a6000 0x000a6000 0x4a5bd8df 14/07/2009 02:01:19 secdrv.SYS fffff880`0697c000 fffff880`06987000 0x0000b000 0x4508052e 13/09/2006 14:18:38 srvnet.sys fffff880`06987000 fffff880`069b4000 0x0002d000 0x4dba2ca3 29/04/2011 04:12:35 tcpipreg.sys fffff880`069b4000 fffff880`069c6000 0x00012000 0x4a5bcccd 14/07/2009 01:09:49 vmnetuserif.sys fffff880`069c6000 fffff880`069d0000 0x0000a000 0x4b5a7a6b 23/01/2010 05:26:19 vstor2-mntapi10.sys fffff880`069d0000 fffff880`069dc000 0x0000c000 0x49e94462 18/04/2009 04:09:22 vstor2-ws60.sys fffff880`069dc000 fffff880`069e8000 0x0000c000 0x4ad39a52 12/10/2009 22:06:26 srv2.sys fffff880`06800000 fffff880`06867000 0x00067000 0x4dba2cb3 29/04/2011 04:12:51 srv.sys fffff880`06763000 fffff880`067f8000 0x00095000 0x4dba2cc1 29/04/2011 04:13:05 NisDrvWFP.sys fffff880`06867000 fffff880`0687f000 0x00018000 0x4d9cc855 06/04/2011 21:08:53 WinRing0x64.sys fffff880`0687f000 fffff880`06886000 0x00007000 0x488b26c1 26/07/2008 14:29:37 asyncmac.sys fffff880`0aa8f000 fffff880`0aa9a000 0x0000b000 0x4a5bcce5 14/07/2009 01:10:13 nvoclk64.sys fffff880`0aa9a000 fffff880`0aaaa000 0x00010000 0x4ab00e3d 15/09/2009 22:59:25 I'd apreciate any help because I'm well outside of my comfort zone.

  Read the article

• Analyze a BSOD (irql_less_than_or_equal)

  - by Bruno Reis

  Hello. About 2 months ago I bought a new system and built it at home: Mother board: XFX X58i Processor: Core i7 920, using the stock cooler Memory: 3x2GB Corsair DDR3 1600 Video card: NVIDIA GTS 250 (1GB) Hard disk: 2x WD 500GB, 7200rpm I have 2 screens plugged into the video card, and the system is connected to a 550W PSU. Nothing is overclocked. After building the system, I stressed it a lot with Prime95 and rthdribl to check its stability. All my tests were perfect. So I reinstalled Win 7 x64 Professional and started using it normally. The first week (2010-03-15) I got the infamous irql_less_than_or_equal BSOD. Ten days after (2010-03-24) I got another one. Then on 2010-04-09, 2010-05-04. Since 2 days ago it became worse: I got one bluescreen per day! (2010-05-12, 2010-05-13, 2010-05-14). I installed BlueScreenView to try to obtain some information, but I'm not able to extract any useful information apart from the bug check string (irql_less_than_or_equal), and that it was caused by ntoskrnl.exe (the first three at ntoskrnl.exe+71f00, the last 4 at ntoskrnl.exe+70600 -- which I suspect could be the same thing, as Microsoft could have patched this file in the mean time, so the address of the function causing it changed). Then I stressed my memory sticks with memtest, they worked perfectly. After booting, I've stressed my GPU with FurMark and RTHDRIBL, everything was fine. Then I stressed the CPU with 4 instances of Prime95 while monitoring the temperature -- that never exceeded 85oC with the case closed --, everything fine. Finally I've stressed the whole system with HeavyLoad for a looooong time, everything worked just fine. So, I have stressed most of the components of the system, but couldn't get any useful information from it. Do you have any hint on what else can I do to find the culprit? Thanks Bruno

  Read the article

• Spots appear in a rectangle area on screen, ubuntu gnome 13.04, nvidia driver

  - by frozen-flame

  I am using Ubuntu Gnome 13.04 with nvidia-310 driver installed. My GPU is GeForce GTX650. Strange spots freqently appear on screen, with following traits: Spots are restricted in one or two rectangle areas at any instant. When typing, the pattern of spots change. Possibly increase, or all disappear when one key pressed. Mouse movement also influences. This problem last within one boot. The only way can I get rid of this problem is to reboot. It can be detected as soon as entering desktop if it appears. Simultaneously, the "power off" option is lost in the top-right menu of Gnome3. Never such problem when using windows 7 on the same computer, neither ubuntu with Nouveou driver. Seldomly, half of the screen become black. I googled a lot. Similar conditions are described, but no confirmed solution. Uninstall-r einstall strategy does not work. Any clue solving this will be appeciated.

  Read the article

• AMD 700, 800 series chipset. I'm lost.

  - by Shiki

  I've been an Intel / NVidia user ever since I started using computers. Intel really gone up with the prices, and they won't get cheaper. So I decided to get an AMD. But WHICH one? I mean.. not shopping question but.. what are the differences? Like: 880GMA comes only with a single PCI ex and it looks like a chinese replica (no offense). While 890FX comes with 5PCI-ex for QuadCrossfire. Also.. what's the deal with 7xx series? I mean.. its the same price. Yet its older? Or why is it 7xx? Isn't there a single chipset between? Not chinese YET it's durable/fine for long-term usage? What it should know (desktop stuff): NVidia GPU (Zalman AMP2 GTX 260^2 (one card)) Phenom 1090T cpu A somewhat good audio. Any ideas which is the chipset I'm searching for? If this sounds too much of a shopping question, feel free to edit. I just want some clarification on these chipsets.

  Read the article

• NVIDIA GeForce GT750M drivers for Ubuntu 13.10 on iMac

  - by Eugene B

  I have just got a new iMac 14.3 with 21.5' display. It has Intel i7 processor and NVIDIA GeForce GT750M graphics card with GPU (Device ID: 0x00fe9). I have installed Ubuntu 13.10 on it (dual boot with refit). Everything works fine apart from graphics. It is clear that graphics' not accelerated, and there are no drivers suggested in the "Additional drivers" section. I have tried to Install nvidia drivers from the repository. Download nvidia drivers and install them manually. Follow instructions here. Follow instructions here. Follow instructions here. Install bumblebee. Play around with xorg.conf file. Blacklist nouveau. As you may guess, nothing worked. The weirdest thing is, that when I boot from a LiveCD, it picks up screen resolution and all the rest correctly, though when I install the system to my Hard Drive it clearly does not have proper drivers. Does anyone have any suggestion what to do?

  Read the article

• Melting plastic around DC-in jack in laptop

  - by Ove

  I recently noticed that the plastic around the DC-in jack of my laptop was warped (melted) a little bit. Since I noticed, I have done some experiments, and saw that the metal tip of the charger heats up very much when I am gaming, or performing CPU-intensive work (it's so hot that i can't hold it between my fingers). When I am using Windows normally (web browsing, music, video), the tip is not hot. I tried using another charger from a compatible laptop, but its metal tip overheated as well, so the problem is not caused by the charger. I have been using this laptop for gaming for 1.5 years and I never had this problem. When gaming I always use a laptop cooler. Dust is not the problem (i cleaned out the dust), and the CPU and GPU temperatures are not higher than when I got the laptop. The only thing that is excessively hot is the charger tip. Because I bought my laptop from the USA, sending it to warranty and back would cost more than the laptop's value, so I need to fix it myself. I have googled around, and I saw that the problem might be the DC-in jack that is located on the motherboard of the laptop. I plan to take the laptop apart and see if it has become loose, and soldering it in place if it has. My questions for you are: Did anyone deal with this problem in the past? Did anyone manage to fix it? Is the DC-in jack the culprit in this case? Or is it possible for the problem to be caused by another part on the motherboard? Is there any way I can check the DC-in jack with a multimeter? What should I measure (resistance, etc)? EDIT: My laptop is a Sager NP5135 (aka Clevo B5130M). I also posted on NBR, including some pictures: link

  Read the article

• Is the exhaust fan necessary?

  - by Borek

  On my new PC, the component making the most noise is the rear exhaust fan on my case (it is the only exhaust fan in my PC). I tried to disconnect it and watched temperatures in SpeedFan and CPU was usually at about 35C, peaking to about 50C when the system was under load - this doesn't look too bad. So I'm considering that I'll leave the exhaust fan disconnected permanently after which the computer is very quiet - the only noise-making components are Arctic Cooling Freezer 7 Pro Rev.2 (CPU fan) and PSU fan (Enermax Pro 82+), both being quiet enough as far as I can tell. (My GPU has a passive cooler.) Also, those 2 components are moving parts so will provide some air flow in the case and, even better, PSU fan sucks the air out of the case so it kind of is an exhaust fan in itself. Does anyone run with the exhaust fan disconnected? You don't have to tell me that it's always better to have more air flow than less, I know that, but the noise is also a consideration for me and temperatures around 40C should be fine shouldn't they? (I might also consider getting a quieter case fan but I'm specifically interested in your opinion on the no exhaust fan scenario.)

  Read the article

• Tri-head linux system with Xmonad: is it possible to have HW acceleration

  - by progo

  What means there exists to have three monitors, all controlled by Xmonad and have hardware 3D acceleration as well? I had the pleasure of using three monitors earlier this year, and while Xmonad and Xinerama handle three monitors easily, I had to throw in an extra display driver, and also let go of Nvidia's own TwinView (which is a hack on Xinerama). This left me with no HW acceleration and some flickering as double buffering wouldn't work with certain applications. However, the three monitors handle so beautifully that I had hard time coming back to two. I understand the easiest way to achieve HW-accelerated tri-head combo is to split into two Xorgs. I wouldn't be able to switch windows between the Xorgs, so I'm not really into this solution. What's more, having a cheap and old PCI card along with even slightly better PCIe seemed to slow things down. Even if I occasionally disabled the third monitor from Xorg configure, I couldn't get HW acceleration to work. Only after I physically disconnected the old PCI card, I could get the games back in business. Would a Matrox Dual/Tri-head2go and a powerful Nvidia GPU do the trick? I understand Xmonad can be configured to "believe" that a "single" (as Dualhead2Go will merge) 3360x1050 display is actually two different ones? So that Xmonad's Mod-w and Mod-e would work properly there.

  Read the article

• Debian: What are these files in /sys/devices/pci0000:00/ for?

  - by muhuk

  I am running Debian Squeeze on an MSI M670 laptop. I have these following files on my root drive, each 256MB: file:///sys/devices/pci0000:00/0000:00:05.0/resource1 file:///sys/devices/pci0000:00/0000:00:05.0/resource1_wc Here is my lspci output: muhuk@debian:~$ lspci 00:00.0 RAM memory: nVidia Corporation C51 Host Bridge (rev a2) 00:00.2 RAM memory: nVidia Corporation C51 Memory Controller 1 (rev a2) 00:00.3 RAM memory: nVidia Corporation C51 Memory Controller 5 (rev a2) 00:00.4 RAM memory: nVidia Corporation C51 Memory Controller 4 (rev a2) 00:00.5 RAM memory: nVidia Corporation C51 Host Bridge (rev a2) 00:00.6 RAM memory: nVidia Corporation C51 Memory Controller 3 (rev a2) 00:00.7 RAM memory: nVidia Corporation C51 Memory Controller 2 (rev a2) 00:03.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1) 00:05.0 VGA compatible controller: nVidia Corporation C51 [GeForce Go 6100] (rev a2) 00:09.0 RAM memory: nVidia Corporation MCP51 Host Bridge (rev a2) 00:0a.0 ISA bridge: nVidia Corporation MCP51 LPC Bridge (rev a3) 00:0a.1 SMBus: nVidia Corporation MCP51 SMBus (rev a3) 00:0a.3 Co-processor: nVidia Corporation MCP51 PMU (rev a3) 00:0b.0 USB Controller: nVidia Corporation MCP51 USB Controller (rev a3) 00:0b.1 USB Controller: nVidia Corporation MCP51 USB Controller (rev a3) 00:0d.0 IDE interface: nVidia Corporation MCP51 IDE (rev a1) 00:0e.0 IDE interface: nVidia Corporation MCP51 Serial ATA Controller (rev a1) 00:0f.0 IDE interface: nVidia Corporation MCP51 Serial ATA Controller (rev a1) 00:10.0 PCI bridge: nVidia Corporation MCP51 PCI Bridge (rev a2) 00:10.1 Audio device: nVidia Corporation MCP51 High Definition Audio (rev a2) 00:14.0 Bridge: nVidia Corporation MCP51 Ethernet Controller (rev a3) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 04:04.0 FireWire (IEEE 1394): O2 Micro, Inc. Firewire (IEEE 1394) (rev 02) 04:04.2 SD Host controller: O2 Micro, Inc. Integrated MMC/SD Controller (rev 01) 04:04.3 Mass storage controller: O2 Micro, Inc. Integrated MS/xD Controller (rev 01) 04:09.0 Network controller: RaLink RT2561/RT61 rev B 802.11g I am speculating these have something to do with the shared RAM my GPU is using. But why a file on disk? And why two of them?

  Read the article

• My Computer hangs for a few minutes just after startup, and then is fine.

  - by EvilChookie

  So I just built myself a reasonably beefy computer, and I installed Windows 7 on it. However, I start the machine up each morning and within a few minutes, the computer will semi hang. That is the mouse is responsive, and most of the time I can open task manager, or a new tab in Chrome. Occasionally windows will be labelled as 'Not responding'. Then, the machine will get over it's problem, and will be nice and quick until I turn it off. Here's my specs: CPU: AMD Phenom-II X4 955 Black (Quad Core, 3.2ghz) RAM: 4GB of DDR3 1300 MOBO: ASUS M4A785T-M (Latest BIOS) HARD DRIVES: 2x1TB Western Digital Caviar Blacks in RAID-0. OS: Windows 7 Ultimate x64. GPU: ASUS GT240 1GB. I believe this issue relates to the RAID array, as I didn't have the lockup problem before I created the array. I purchased a second drive and reformatted after creating a RAID array, since the single drive was a little on the pokey side (compared to the rest of the computer). What I have tried: Updated Raid Drivers Malware checks Windows Updates Unecessary Services CPU and Disk activity appears to be low (via Resource Monitor) No strange errors in the error log. Any thoughts?

  Read the article

• Troubleshooting: Monitor never turns on, system fans running, DVD-ROM does not open.

  - by Wesley

  Hi all, Here are my specs beforehand: ECS P4VXASD2+ (V5.0) motherboard FSB 533MHz Intel Pentium 4 2.40A GHz Prescott Socket 478 2x 256MB PC2100 DDR RAM, 2x 256MB PC133 SDRAM CoolMax 350W PSU DVD-ROM - will edit with brand & model 128MB ATi Radeon 9800 Pro AGP No hard drive So, I just put those parts together today and I tried to power it up, with the monitor connected to the Radeon 9800 in the AGP slot (mobo does not have VGA port). After turning it on, the CPU fan, graphics fan and system fan go on. However, the monitor remains in standby mode, despite being plugged in. Also, after pushing the button on the DVD-ROM drive, it does not open. I've used the DVD-ROM drive before with absolutely no issues. The graphics card was slightly buggy when I put it on another machine, which was left outside in winter weather for 3 months. (Still that computer's integrated graphics worked fine.) CMOS battery was replaced and jumpers are all set correctly. Now, I'm wondering whether the motherboard, CPU, PSU or GPU is the problem. What can I do to test which part is the problem? Just to clarify, I don't have a hard drive, so I usually boot Ubuntu from the disc drive. Anyways, thanks in advance!

  Read the article

• Windows 8 Doesn't Shutdown Properly With Fast Start-Up Enabled

  - by Patrick

  While Fast start-up is enabled, on turning the computer off (shutdown) the computer idles for about 5min after logging out/screen turning off. It then turns off. On returning into Windows I receive the error message saying Windows didn't shut down properly. Hibernate works fine, and I am told this shouldn't be the case - If one doesn't work, neither should. It works when both Fast start-up is enabled and disabled, as does restart and sleep. Windows is installed under UEFI. The UEFI ultra fast boot option for my motherboard cannot be enabled as my GPU doesn't support some UEFI GOP tech. As far as I know, not related to windows fast start-up, but thought it was worth mentioning. To clarify, if this: http://www.eightforums.com/tutorials/6320-fast-startup-turn-off-windows-8-a.html is enabled, the computer does not shut down properly. EDIT: Some more information on the matter: Formatting didn't fix the issue. Still fails regardless of drivers installed. Hardware was purchased ~6months ago. Running a good SSD. Event viewer Always these two messages in close succession: Error (event ID 6008): The previous system shutdown at 7:45:21 PM on ?27/?10/?2012 was unexpected. Critical (kernel power, event ID 41): The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly. Upon installing WPT as suggested below to figure out what was happening during shutdown, and running the cmd xbootmgr -trace shutdown -noPrepReboot -traceFlags BASE+CSWITCH+DRIVERS+POWER -resultPath C:\TEMP Windows fast start-up is now working consistently. Still works upon uninstalling WPT. This is the only change to occur on the computer. Nothing else has bee installed/uninstalled, no Windows Updates, nothing. Windows fast start-up did not work prior to installing WPT and running the cmd (made sure I tested).

  Read the article

• Tooltips shadow stuck on desktop

  - by faulty

  I tends to get this problem from time to time. The tooltips with a shadow appearing on top of everything. It's the shadow of the tooltips not disappearing after the tooltips disappear. The last one I had the tooltips was from the wifi connection list at the systray. This problem also happen to me on another computer. Both running Win7 with ATI gpu. I found this similar post Menu command stuck on screen but none of the solution helped. In fact the "Fade or slide tooltips into view" has been unchecked from the beginning. Ending task of "dwm.exe" also doesn't help. So far the only way to resolve this by restarting window. I can't post picture yet, so can't show any screenshot. Edit: Just tested a few more trick which doesn't work. Turn of aero Hibernate Switch main display to external display and switch back. Change resolution Edit(heavyd): Here is a screenshot from my machine.

  Read the article

• Screen Flickering: Hardware or Software?

  - by Wesley

  I have a Samsung N120 netbook (upgraded to 2GB DDR2 RAM) and there has been a screen flickering issue for some time now. However, I have not been able to accurately determine whether it is a software or hardware issue. Here are some of the symptoms: The flicker is white-colored and shows up as vertical lines. Flickering or not, there may be occasionally some random blue patterns (no image distortion) The screen tends to flicker more when the screen is not tilted back all the way. When tilting the screen back and forth, the screen will usually flicker. Some images on the screen may randomly distort without full-on flickering. The screen will flicker only on certain websites, but not on others. A certain part of a webpage may constantly be distorted randomly, even when scrolling. While flickering, the mouse will not move though I'm moving my finger along the touchpad. A connected external monitor does not have any problems. The flickering is completely random and does not seem to follow any CPU/GPU usage trends. Flickering usually gets worse when the screen brightness is turned higher. There will be flickering on battery and while plugged in. Search up "Samsung N120 - Screen Flickering" on YouTube for an idea of what the flickering looks like. However, there is no visible distortions and the flickering seems to stop when the screen has dimmed. Since the problems started, I tried formatting and using Windows 7, then formatted again and went back to Windows XP. The screen was also replaced sometime during this past summer. The uninstallation of the Samsung Battery Manager (on the original install of XP) seemed to reduce the flicker partially, but eventually got worse. So, what could possibly be the problem?

  Read the article

• Xorg input devices fail without udev

  - by Sampo

  What I am trying to do: Launch Xorg server without udev device manager. What I have tried to do: Make sure that /dev/ has all required nodes, such as /dev/input/*. Make sure that all required kernel modules are loaded. Launch Xorg. What happens: Xorg starts up as excepted. Xorg loads correct GPU driver and sets right screen resolution. Xorg blocks all input devices (keyboard, mouse), Alt+F[1-12] does not work (can't go back to tty1). Unraw'ing keyboard to take its control from X removes blocking and after unraw I can Alt+F1 back to tty1. Xorg still does not handle any input. Why I think that it should work: Same configuration works well if udev is loaded. Loading udev does not add or modify /dev/ contents, all nodes stays same. My main question is: How to make Xorg input devices work without udev? Any additional information about how Xorg really uses/detects/grabs keyboard would be helpful. And any additional information about what udev really does (other than populating /dev/) would also be helpful.

  Read the article

• Samsung laptop randomly shuts down

  - by Dmatig

  I've rewritten this question because it turned into an indecipherable mess. I have a Samsung R560 laptop that is overheating, and shutting itself down under load consistantly. Thank you quickcel for reccomending me Speedfan to monitor my temps. Here they are (Load / Idle): (Ignore "Temp1 and Temp2", whatever sensors they are they'd always random, pretty sure they're broke). The load temperature is after just 5 minites of playing Fallout 3 - another 5 minutes and it (the GPU - 9600M GS) consistantly breaches the mid 90's then shuts down, so it's hard to get a good picture of it. I'm looking for some solution or way to decrease these temperatures, because they seem far too high even idle. I've tried: Opening up the case and clearing of all dust with compressed air. Updating drivers for my Graphics card Have purchased and am using a notebook cooler I don't want to: Undervolt / underclock (defeats the point of having a more expensive card) Use lower power / performance settings (again, i might as well have bought something cheaper) Is there anything else i can try (software or inexpensive hardware) that can help me fix this? Has anybody had a Samsung laptop and knows if this can be sorted under my warranty, and the turnaround time of sending it off (UK?)(it has always ran hotter than it should, but now at 6 months old is getting hot enough to power off)

  Read the article

• Getting Dell E6320 with I7 to work with 3 monitors at 1920x1080p x 3

  - by MadBoy

  I want to buy Dell E6320 which comes with Intel Core I7-2620M (2.70GHz, 4MB cache, Dual Core) with Intel HD Graphics 3000. Laptop will come with docking station. I want to connect 3 monitors to that docking station so that working at home would give me some additional boost. Docking station will allow me to connect only 2 monitors so I'm looking at following other options: Matrox TRIPLEHEAD2GO DIGITAL Edition or TRIPLEHEAD2GO DP Edition. But reading Matrox Support Page intel GPU can't run the highest resolution with 3 monitors connected, it even gets worse since it seems monitors would have to be able to work at 50hz. Also I'm not sure but it seems that Matrox doesn't split the monitors as 3 separate monitors but simply as one big space (which is a bit opposite to what I need) Buy 2 or maybe just 1 USB based monitor but it would also mean having 1 or 2 different monitors then the main one, unless I buy 3 USB based monitors which would mean more money to spend. Also I found only couple of models and most of them require USB 3.0 and no other cables to plug in (nice but costly - couldn't find decent monitor with only USB for sending signal and having power connected normally) . But docking station has only one USB 3.0 port. Can I use hub and still get it to work? Find some converters from Digital to USB (I think DisplayLink does some?) Buy different laptop but what kind? I need it to be I7, small (13"), fast and lightweight. At same time it requires docking station that I can use at home to connect 3 external monitors. Some other suggested solution... Edit: I need 3 monitors for work in terms of coding in Visual Studio or having word/excel/outlook open. Nothing fancy. Maybe some movie once in a while.

  Read the article

• How to play 24 fps video smoothly on a 60Hz display?

  - by netvope

  I use mpc-hc to play videos on Win7 x64. With the default settings (#1), video playback is great most of the time. But for panning shots, playback is not smooth. I stepped through the video frame by frame and found that the panning movement is smooth (e.g. each frame shifts horizontally by 10 pixels), so the problem is how the 23.976 fps video is interpolated to 60Hz. The judder looks like what would be caused by a "2:3 pulldown", where the frames are played unevenly like: frame 1, 1, 2, 2, 2, 3, 3, 4, 4, 4, etc (#2) Using "optimal renderer settings" (#3) instead of the default disables the Aero theme and causes tearing. Setting my LCD display to 50Hz may have improved the judder slightly (but I can't really tell). My display does not support 24Hz or 48Hz, and forcing them in the Nvidia control panel gives blurry screen. I've tried other video players (VLC and KMPlayer), the ReClock Directshow Filter, video files from different sources (#4), turning on/off DXVA, and a computer with a different GPU, but the judder in the playback is similar. None of them solved the problem. So, how can I play 23.976 or 24 fps video smoothly on a 60Hz display? I think a video player could make the video smoother by doing linear interpolation, such as: 1. 100% frame 1 2. 60% frame 1 + 40% frame 2 3. 20% frame 1 + 80% frame 2 4. 80% frame 2 + 20% frame 3 5. 40% frame 2 + 60% frame 3 6. 100% frame 3 7. 60% frame 3 + 40% frame 4 .. etc Can any existing video player do this? Footnotes: (#1) Video renderer: EVR Custom Pres. (#2) This example converts a 24 fps video into 30 fps (#3) View Renderer settings Reset Reset to optimal renderer settings (#4) The files I have are all H.264 mkv files, but I don't think the file format/encoding matters.

  Read the article

< Previous Page | 29 30 31 32 33 34 35 36 37 38 39  | Next Page >