Search Results

Search found 894 results on 36 pages for 'ins'.

Page 33/36 | < Previous Page | 29 30 31 32 33 34 35 36  | Next Page >

  • Displaylink USB show "Logo / Loading" on monitor

    - by Ken Le
    I tried with this problem for 2 years already. LOL, today, I install Ubuntu for I have to resolve it or I will back to stupid Windows 7. First, I have 3 monitors. My graphic card is support dual ( ATI Radeon ), so I have no problem on extend those multi monitor on VGA and DVI. The 3rd monitor is Displaylink USB. After installed everything required, when I reboot, the displaylink monitor show "Ubuntu ...." like logo / loading screen. I go to System Display , Detect monitor, it only show my 1st and 2nd, NO 3RD Displaylink. I can move my mouse between those 1st & 2nd, but the 3rd is only show the Ubuntu Screen. I press Ctrl+Alt+1, then screen switch to Displaylink USB 3RD monitor, but its "Terminal" not a desktop. Then I press Ctrl+Alt+7 , the screen switch back to my 1st, 2nd, and the displaylink 3rd is witch back to Logo / Ubuntu again. This is my /etc/X11/xorg.conf : Section "ServerLayout" Identifier "X.org Configured" Screen 0 "aticonfig-Screen[0]-0" 0 0 Screen 1 "DisplayLinkScreen" Leftof "aticonfig-Screen[0]-0" InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" ModulePath "/usr/lib/xorg/modules" FontPath "/usr/share/fonts/X11/misc" FontPath "/usr/share/fonts/X11/cyrillic" FontPath "/usr/share/fonts/X11/100dpi/:unscaled" FontPath "/usr/share/fonts/X11/75dpi/:unscaled" FontPath "/usr/share/fonts/X11/Type1" FontPath "/usr/share/fonts/X11/100dpi" FontPath "/usr/share/fonts/X11/75dpi" FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" FontPath "built-ins" EndSection Section "Module" Load "glx" Load "dri2" Load "dbe" Load "dri" Load "record" Load "extmod" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5 6 7" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Monitor" Identifier "DisplayLinkMonitor" EndSection Section "Monitor" Identifier "0-DFP1" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1680x1050" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Monitor" Identifier "0-CRT2" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1920x1080" Option "TargetRefresh" "60" Option "Position" "1680 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz", ### <percent>: "<f>%" ### [arg]: arg optional #Option "NoAccel" # [<bool>] #Option "SWcursor" # [<bool>] #Option "Dac6Bit" # [<bool>] #Option "Dac8Bit" # [<bool>] #Option "BusType" # [<str>] #Option "CPPIOMode" # [<bool>] #Option "CPusecTimeout" # <i> #Option "AGPMode" # <i> #Option "AGPFastWrite" # [<bool>] #Option "AGPSize" # <i> #Option "GARTSize" # <i> #Option "RingSize" # <i> #Option "BufferSize" # <i> #Option "EnableDepthMoves" # [<bool>] #Option "EnablePageFlip" # [<bool>] #Option "NoBackBuffer" # [<bool>] #Option "DMAForXv" # [<bool>] #Option "FBTexPercent" # <i> #Option "DepthBits" # <i> #Option "PCIAPERSize" # <i> #Option "AccelDFS" # [<bool>] #Option "IgnoreEDID" # [<bool>] #Option "CustomEDID" # [<str>] #Option "DisplayPriority" # [<str>] #Option "PanelSize" # [<str>] #Option "ForceMinDotClock" # <freq> #Option "ColorTiling" # [<bool>] #Option "VideoKey" # <i> #Option "RageTheatreCrystal" # <i> #Option "RageTheatreTunerPort" # <i> #Option "RageTheatreCompositePort" # <i> #Option "RageTheatreSVideoPort" # <i> #Option "TunerType" # <i> #Option "RageTheatreMicrocPath" # <str> #Option "RageTheatreMicrocType" # <str> #Option "ScalerWidth" # <i> #Option "RenderAccel" # [<bool>] #Option "SubPixelOrder" # [<str>] #Option "ClockGating" # [<bool>] #Option "VGAAccess" # [<bool>] #Option "ReverseDDC" # [<bool>] #Option "LVDSProbePLL" # [<bool>] #Option "AccelMethod" # <str> #Option "DRI" # [<bool>] #Option "ConnectorTable" # <str> #Option "DefaultConnectorTable" # [<bool>] #Option "DefaultTMDSPLL" # [<bool>] #Option "TVDACLoadDetect" # [<bool>] #Option "ForceTVOut" # [<bool>] #Option "TVStandard" # <str> #Option "IgnoreLidStatus" # [<bool>] #Option "DefaultTVDACAdj" # [<bool>] #Option "Int10" # [<bool>] #Option "EXAVSync" # [<bool>] #Option "ATOMTVOut" # [<bool>] #Option "R4xxATOM" # [<bool>] #Option "ForceLowPowerMode" # [<bool>] #Option "DynamicPM" # [<bool>] #Option "NewPLL" # [<bool>] #Option "ZaphodHeads" # <str> Identifier "Card0" Driver "radeon" BusID "PCI:5:0:0" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz", ### <percent>: "<f>%" ### [arg]: arg optional #Option "ShadowFB" # [<bool>] #Option "Rotate" # <str> #Option "fbdev" # <str> #Option "debug" # [<bool>] Identifier "Card1" Driver "fbdev" BusID "PCI:5:0:0" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz", ### <percent>: "<f>%" ### [arg]: arg optional #Option "ShadowFB" # [<bool>] #Option "DefaultRefresh" # [<bool>] #Option "ModeSetClearScreen" # [<bool>] Identifier "Card2" Driver "vesa" BusID "PCI:5:0:0" EndSection Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" Option "Monitor-DFP1" "0-DFP1" Option "Monitor-CRT2" "0-CRT2" BusID "PCI:5:0:0" EndSection Section "Device" Identifier "DisplayLinkDevice" Driver "displaylink" Option "fbdev" "/dev/fb1" Option "ShadowFB" "off" EndSection Section "Screen" Identifier "aticonfig-Screen[0]-0" Device "aticonfig-Device[0]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Virtual 3600 1920 Depth 24 EndSubSection EndSection Section "Screen" Identifier "DisplayLinkScreen" Device "DisplayLinkDevice" Monitor "DisplayLinkMonitor" DefaultDepth 24 SubSection "Display" Depth 24 Modes "1920x1080" EndSubSection EndSection

    Read the article

  • How to disable Mac OS X from using swap when there still is "Inactive" memory?

    - by Motin
    A common phenomena in my day to day usage (and several other's according to various posts throughout the internet) of OS X, the system seems to become slow whenever there is no more "Free" memory available. Supposedly, this is due to swapping, since heavy disk activity is apparent and that vm_stat reports many pageouts. (Correct me from wrong) However, the amount of "Inactive" ram is typically around 12.5%-25% of all available memory (^1.) when swapping starts/occurs/ends. According to http://support.apple.com/kb/ht1342 : Inactive memory This information in memory is not actively being used, but was recently used. For example, if you've been using Mail and then quit it, the RAM that Mail was using is marked as Inactive memory. This Inactive memory is available for use by another application, just like Free memory. However, if you open Mail before its Inactive memory is used by a different application, Mail will open quicker because its Inactive memory is converted to Active memory, instead of loading Mail from the slower hard disk. And according to http://developer.apple.com/library/mac/#documentation/Performance/Conceptual/ManagingMemory/Articles/AboutMemory.html : The inactive list contains pages that are currently resident in physical memory but have not been accessed recently. These pages contain valid data but may be released from memory at any time. So, basically: When a program has quit, it's memory becomes marked as Inactive and should be claimable at any time. Still, OS X will prefer to start swapping out memory to the Swap file instead of just claiming this memory, whenever the "Free" memory gets to low. Why? What is the advantage of this behavior over, say, instantly releasing Inactive memory and not even touch the swap file? Some sources (^2.) indicate that OS X would page out the "Inactive" memory to swap before releasing it, but that doesn't make sense now does it if the memory may be released from memory at any time? Swapping is expensive, releasing is cheap, right? Can this behavior be changed using some preference or known hack? (Preferably one that doesn't include disabling swap/dynamic_pager altogether and restarting...) I do appreciate the purge command, as well as the concept of Repairing disk permissions to force some Free memory, but those are ways to painfully force more Free memory than to actually fixing the swap/release decision logic... Btw a similar question was asked here: http://forums.macnn.com/90/mac-os-x/434650/why-does-os-x-swap-when/ and here: http://hintsforums.macworld.com/showthread.php?t=87688 but even though the OPs re-asked the core question, none of the replies addresses an answer to it... ^1. UPDATE 17-mar-2012 Since I first posted this question, I have gone from 4gb to 8gb of installed ram, and the problem remains. The amount of "Inactive" ram was 0.5gb-1.0gb before and is now typically around 1.0-2.0GB when swapping starts/occurs/ends, ie it seems that around 12.5%-25% of the ram is preserved as Inactive by osx kernel logic. ^2. For instance http://apple.stackexchange.com/questions/4288/what-does-it-mean-if-i-have-lots-of-inactive-memory-at-the-end-of-a-work-day : Once all your memory is used (free memory is 0), the OS will write out inactive memory to the swapfile to make more room in active memory. UPDATE 17-mar-2012 Here is a round-up of the methods that have been suggested to help so far: The purge command "Used to approximate initial boot conditions with a cold disk buffer cache for performance analysis. It does not affect anonymous memory that has been allocated through malloc, vm_allocate, etc". This is useful to prevent osx to swap-out the disk cache (which is ridiculous that osx actually does so in the first place), but with the downside that the disk cache is released, meaning that if the disk cache was not about to be swapped out, one would simply end up with a cold disk buffer cache, probably affecting performance negatively. The FreeMemory app and/or Repairing disk permissions to force some Free memory Doesn't help releasing any memory, only moving some gigabytes of memory contents from ram to the hd. In the end, this causes lots of swap-ins when I attempt to use the applications that were open while freeing memory, as a lot of its vm is now on swap. Speeding up swap-allocation using dynamicpagerwrapper Seems a good thing to do in order to speed up swap-usage, but does not address the problem of osx swapping in the first place while there is still inactive memory. Disabling swap by disabling dynamicpager and restarting This will force osx not to use swap to the price of the system hanging when all memory is used. Not a viable alternative... Disabling swap using a hacked dynamicpager Similar to disabling dynamicpager above, some excerpts from the comments to the blog post indicate that this is not a viable solution: "The Inactive Memory is high as usual". "when your system is running out of memory, the whole os hangs...", "if you consume the whole amount of memory of the mac, the machine will likely hang" To sum up, I am still unaware of a way of disabling Mac OS X from using swap when there still is "Inactive" memory. If it isn't possible, maybe at least there is an explanation somewhere of why osx prefers to swap out memory that may be released from memory at any time?

    Read the article

  • Multiple Graphics Cards on Fedora 15 (Gnome 3)

    - by Michael
    I have the (delightful) misfortune of having 3 graphics cards. They are XFX Radeon 5750s. Each drives 2 monitors via dvi. I am having a really hard time getting these running on fedora 15 (gnome 3). So my setup is 3 columns of 2 monitors (the upper monitor is mounted upside down in each column to reduce the bezel between monitors). When the (graphical) login screen comes up all 6 have the blue stripey background that must be the default, but then when I login, things get interesting. In the xorg.conf below, you will see only 2 of the screens in the serverlayout while the other 4 are commented out. Logging in with only 2 of the screens active works well (and it even remembers that the top one is upside down, and should be considered above the lower, i am not sure where it stores this info, but i set it using the graphical "Displays" settings) However, as soon as I uncomment a third screen, or more, it gives me an error message when I login. It's one of those friendly, less helpful messages (Oh no! Something has gone wrong. A problem has occurred and the system can't recover. Please log out and try again). If i do not use an xorg.conf, then the "Displays" prefs pane shows only the two monitors on one of my graphics cards Thanks to anyone who can help me get going! (xorg.conf and then lspci below, and xorg log) xorg.conf Section "ServerLayout" Identifier "X.org Configured" Screen "Screen0" 0 0 Screen "Screen1" Below "Screen0" # Screen "Screen2" RightOf "Screen0" # Screen "Screen3" RightOf "Screen1" # Screen "Screen4" RightOf "Screen3" # Screen "Screen5" RightOf "Screen4" InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" ModulePath "/usr/lib/xorg/modules" FontPath "catalogue:/etc/X11/fontpath.d" FontPath "built-ins" EndSection Section "Module" Load "record" Load "dri" Load "dbe" Load "extmod" Load "dri2" Load "glx" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5 6 7" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Monitor" Identifier "Monitor1" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Monitor" Identifier "Monitor2" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Monitor" Identifier "Monitor3" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Monitor" Identifier "Monitor4" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Monitor" Identifier "Monitor5" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Device" Identifier "Card0" Driver "radeon" BusID "PCI:4:0:0" EndSection Section "Device" Identifier "Card1" Driver "radeon" BusID "PCI:5:0:0" EndSection Section "Device" Identifier "Card2" Driver "radeon" BusID "PCI:6:0:0" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Card0" Monitor "Monitor1" SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen2" Device "Card1" Monitor "Monitor2" SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen3" Device "Card1" Monitor "Monitor3" SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen4" Device "Card2" Monitor "Monitor4" SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen5" Device "Card2" Monitor "Monitor5" SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection lspci output follows [tgm@tgm ~]$ lspci 00:00.0 Host bridge: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port (rev 13) 00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13) 00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 (rev 13) 00:07.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 7 (rev 13) 00:14.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub System Management Registers (rev 13) 00:14.1 PIC: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers (rev 13) 00:14.2 PIC: Intel Corporation 5520/5500/X58 I/O Hub Control Status and RAS Registers (rev 13) 00:14.3 PIC: Intel Corporation 5520/5500/X58 I/O Hub Throttle Registers (rev 13) 00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 00:1c.1 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 2 00:1c.2 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 3 00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) 00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller 00:1f.2 IDE interface: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1 00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller 00:1f.5 IDE interface: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller #2 02:00.0 PCI bridge: nVidia Corporation NF200 PCIe 2.0 switch for mainboards (rev a3) 03:00.0 PCI bridge: nVidia Corporation NF200 PCIe 2.0 switch for mainboards (rev a3) 03:02.0 PCI bridge: nVidia Corporation NF200 PCIe 2.0 switch for mainboards (rev a3) 04:00.0 VGA compatible controller: ATI Technologies Inc Juniper [Radeon HD 5750 Series] 04:00.1 Audio device: ATI Technologies Inc Juniper HDMI Audio [Radeon HD 5700 Series] 05:00.0 VGA compatible controller: ATI Technologies Inc Juniper [Radeon HD 5750 Series] 05:00.1 Audio device: ATI Technologies Inc Juniper HDMI Audio [Radeon HD 5700 Series] 06:00.0 VGA compatible controller: ATI Technologies Inc Juniper [Radeon HD 5750 Series] 06:00.1 Audio device: ATI Technologies Inc Juniper HDMI Audio [Radeon HD 5700 Series] 07:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02) 08:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02) xorg log (posted to fpaste due to how long it is. thanks to marcusw for the request) http://www.fpaste.org/r5ww/ xorg log with all 6 monitors enabled in xorg.conf (they all turn on and have blue, but then one gets the aforementioned user-friendly error message). http://www.fpaste.org/X63H/

    Read the article

  • How to open a server port outside of an OpenVPN tunnel with a pf firewall on OSX (BSD)

    - by Timbo
    I have a Mac mini that I use as a media server running XBMC and serves media from my NAS to my stereo and TV (which has been color calibrated with a Spyder3Express, happy). The Mac runs OSX 10.8.2 and the internet connection is tunneled for general privacy over OpenVPN through Tunnelblick. I believe my anonymous VPN provider pushes "redirect_gateway" to OpenVPN/Tunnelblick because when on it effectively tunnels all non-LAN traffic in- and outbound. As an unwanted side effect that also opens the boxes server ports unprotected to the outside world and bypasses my firewall-router (Netgear SRX5308). I have run nmap from outside the LAN on the VPN IP and the server ports on the mini are clearly visible and connectable. The mini has the following ports open: ssh/22, ARD/5900 and 8080+9090 for the XBMC iOS client Constellation. I also have Synology NAS which apart from LAN file serving over AFP and WebDAV only serves up an OpenVPN/1194 and a PPTP/1732 server. When outside of the LAN I connect to this from my laptop over OpenVPN and over PPTP from my iPhone. I only want to connect through AFP/548 from the mini to the NAS. The border firewall (SRX5308) just works excellently, stable and with a very high throughput when streaming from various VOD services. My connection is a 100/10 with a close to theoretical max throughput. The ruleset is as follows Inbound: PPTP/1723 Allow always to 10.0.0.40 (NAS/VPN server) from a restricted IP range >corresponding to possible cell provider range OpenVPN/1194 Allow always to 10.0.0.40 (NAS/VPN server) from any Outbound: Default outbound policy: Allow Always OpenVPN/1194 TCP Allow always from 10.0.0.40 (NAS) to a.b.8.1-a.b.8.254 (VPN provider) OpenVPN/1194 UDP Allow always to 10.0.0.40 (NAS) to a.b.8.1-a.b.8.254 (VPN provider) Block always from NAS to any On the Mini I have disabled the OSX Application Level Firewall because it throws popups which don't remember my choices from one time to another and that's annoying on a media server. Instead I run Little Snitch which controls outgoing connections nicely on an application level. I have configured the excellent OSX builtin firewall pf (from BSD) as follows pf.conf (Apple App firewall tie-ins removed) (# replaced with % to avoid formatting errors) ### macro name for external interface. eth_if = "en0" vpn_if = "tap0" ### wifi_if = "en1" ### %usb_if = "en3" ext_if = $eth_if LAN="{10.0.0.0/24}" ### General housekeeping rules ### ### Drop all blocked packets silently set block-policy drop ### all incoming traffic on external interface is normalized and fragmented ### packets are reassembled. scrub in on $ext_if all fragment reassemble scrub in on $vpn_if all fragment reassemble scrub out all ### exercise antispoofing on the external interface, but add the local ### loopback interface as an exception, to prevent services utilizing the ### local loop from being blocked accidentally. ### set skip on lo0 antispoof for $ext_if inet antispoof for $vpn_if inet ### spoofing protection for all interfaces block in quick from urpf-failed ############################# block all ### Access to the mini server over ssh/22 and remote desktop/5900 from LAN/en0 only pass in on $eth_if proto tcp from $LAN to any port {22, 5900, 8080, 9090} ### Allow all udp and icmp also, necessary for Constellation. Could be tightened. pass on $eth_if proto {udp, icmp} from $LAN to any ### Allow AFP to 10.0.0.40 (NAS) pass out on $eth_if proto tcp from any to 10.0.0.40 port 548 ### Allow OpenVPN tunnel setup over unprotected link (en0) only to VPN provider IPs ### and port ranges pass on $eth_if proto tcp from any to a.b.8.0/24 port 1194:1201 ### OpenVPN Tunnel rules. All traffic allowed out, only in to ports 4100-4110 ### Outgoing pings ok pass in on $vpn_if proto {tcp, udp} from any to any port 4100:4110 pass out on $vpn_if proto {tcp, udp, icmp} from any to any So what are my goals and what does the above setup achieve? (until you tell me otherwise :) 1) Full LAN access to the above ports on the mini/media server (including through my own VPN server) 2) All internet traffic from the mini/media server is anonymized and tunneled over VPN 3) If OpenVPN/Tunnelblick on the mini drops the connection, nothing is leaked both because of pf and the router outgoing ruleset. It can't even do a DNS lookup through the router. So what do I have to hide with all this? Nothing much really, I just got carried away trying to stop port scans through the VPN tunnel :) In any case this setup works perfectly and it is very stable. The Problem at last! I want to run a minecraft server and I installed that on a separate user account on the mini server (user=mc) to keep things partitioned. I don't want this server accessible through the anonymized VPN tunnel because there are lots more port scans and hacking attempts through that than over my regular IP and I don't trust java in general. So I added the following pf rule on the mini: ### Allow Minecraft public through user mc pass in on $eth_if proto {tcp,udp} from any to any port 24983 user mc pass out on $eth_if proto {tcp, udp} from any to any user mc And these additions on the border firewall: Inbound: Allow always TCP/UDP from any to 10.0.0.40 (NAS) Outbound: Allow always TCP port 80 from 10.0.0.40 to any (needed for online account checkups) This works fine but only when the OpenVPN/Tunnelblick tunnel is down. When up no connection is possbile to the minecraft server from outside of LAN. inside LAN is always OK. Everything else functions as intended. I believe the redirect_gateway push is close to the root of the problem, but I want to keep that specific VPN provider because of the fantastic throughput, price and service. The Solution? How can I open up the minecraft server port outside of the tunnel so it's only available over en0 not the VPN tunnel? Should I a static route? But I don't know which IPs will be connecting...stumbles How secure would to estimate this setup to be and do you have other improvements to share? I've searched extensively in the last few days to no avail...If you've read this far I bet you know the answer :)

    Read the article

  • IE8 losing session cookies in popup windows.

    - by HackedByChinese
    We have an ASP.NET application that uses Forms Auth. When users log in, a session ID cookie and a Forms Auth ticket (stored as a cookie) are generated. These are session cookies, not permanent cookies. It is intentional and desirable that when the browser closes, the user is effectively logged out. Once a user logs in, a new window is popped up using window.open('location here');. The page that is opened is effectively the workspace the user works in throughout the rest of their session. From this page, other pop-ups are also used. Lately, we've had a number of customers (all using latest versions of IE8) complaining that the when they log in, the initial pop-up takes them back to the log in screen rather than their homepage. Alternately, users can sometimes log in, get to the homepage (which again, is in a new pop up window), and it all seems fine, until any additional pop-ups are created, where it starts redirecting them to the log in screen again. In attempting to troubleshoot the issue, I've used good old Fiddler. When the problem starts manifesting, I've noticed that the browser is not sending up the ASP.NET session ID session cookie OR the Forms Auth ticket session cookie, even though the response to the log in POST clearly pushes down those cookies. What's more strange is if I CTRL+N to open a new window from the popped-up window that is missing the session cookies, then manually type in the URL to the home page, those cookies magically appear again. However, subsequent window.open(); calls will continue to be broken, not sending the session cookies and taking the user to the log in screen. It's important to note that sometimes, for seemingly no good reason, those same users can suddenly log in and work normally for a while, then it goes back to broken. Now, I've ensured that there are no browser add-ons, plug-ins, toolbars, etc. are running. I've added our site as a trusted site and dropped the security settings to Low, I've modified the Cookie Privacy policy to "accept all" and even disabled automatic policy settings, manually forcing it to accept everything and include session cookies. Nothing appears to affect it. Also note the web application resides on a single server. There is no load balancing, web gardens, server farms, clusters, etc. The server does reside behind an ISA server, but other than that it's pretty straight forward. I've been searching around for days and haven't found anything actionable. Heck, sometimes I can't even reproduce it reliably. I have found a few references to people having this same problem, but they seem to be referencing an issue that was allegedly fixed in a beta or RC release (example: http://stackoverflow.com/questions/179260/ie8-loses-cookies-when-opening-a-new-window-after-a-redirect). These are release versions of IE, with up-to-date patches. I'm aware that I can try to set permanent cookies instead of session cookies. However, this has drastic security implications for our application. Update It seems that the problem automagically goes away when the user is added as a Local Administrator on the machine. Only time will tell if this change permanently (and positively) affects this problem. Time to bust out ProcMon and see if there is a resource access problem.

    Read the article

  • Upgrading Team Foundation Server 2008 to 2010

    - by Martin Hinshelwood
    I am sure you will have seen my posts on upgrading our internal Team Foundation Server from TFS2008 to TFS2010 Beta 2, RC and RTM, but what about a fresh upgrade of TFS2008 to TFS2010 using the RTM version of TFS. One of our clients is taking the plunge with TFS2010, so I have the job of doing the upgrade. It is sometimes very useful to have a team member that starts work when most of the Sydney workers are heading home as I can do the upgrade without impacting them. The down side is that if you have any blockers then you can be pretty sure that everyone that can deal with your problem is asleep I am starting with an existing blank installation of TFS 2010, but Adam Cogan let slip that he was the one that did the install so I thought it prudent to make sure that it was OK. Verifying Team Foundation Server 2010 We need to check that TFS 2010 has been installed correctly. First, check the Admin console and have a root about for any errors. Figure: Even the SQL Setup looks good. I don’t know how Adam did it! Backing up the Team Foundation Server 2008 Databases As we are moving from one server to another (recommended method) we will be taking a backup of our TFS2008 databases and resorting them to the SQL Server for the new TFS2010 Server. Do not just detach and reattach. This will cause problems with the version of the database. If you are running a test migration you just need to create a backup of the TFS 2008 databases, but if you are doing the live migration then you should stop IIS on the TFS 2008 server before you backup the databases. This will stop any inadvertent check-ins or changes to TFS 2008. Figure: Stop IIS before you take a backup to prevent any TFS 2008 changes being written to the database. It is good to leave a little time between taking the TFS 2008 server offline and commencing the upgrade as there is always one developer who has not finished and starts screaming. This time it was John Liu that needed 10 more minutes to make his changes and check-in, so I always give it 30 minutes and see if anyone screams. John Liu [SSW] said:   are you doing something to TFS :-O MrHinsh [SSW UK][VS ALM MVP] said:   I have stopped TFS 2008 as per my emails John Liu [SSW] said:   haven't finish check in @_@   can we have it for 10mins? :) MrHinsh [SSW UK][VS ALM MVP] said:   TFS 2008 has been started John Liu [SSW] said:   I love you! -IM conversation at TFS Upgrade +25 minutes After John confirmed that he had everything done I turned IIS off again and made a cup of tea. There were no more screams so the upgrade can continue. Figure: Backup all of the databases for TFS and include the Reporting Services, just in case.   Figure: Check that all the backups have been taken Once you have your backups, you need to copy them to your new TFS2010 server and restore them. This is a good way to proceed as if we have any problems, or just plain run out of time, then you just turn the TFS 2008 server back on and all you have lost is one upgrade day, and not 10 developer days. As per the rules, you should record the number of files and the total number of areas and iterations before the upgrade so you have something to compare to: TFS2008 File count: Type Count 1 1845 2 15770 Areas & Iterations: 139 You can use this to verify that the upgrade was successful. it should however be noted that the numbers in TFS 2010 will be bigger. This is due to some of the sorting out that TFS does during the upgrade process. Restore Team Foundation Server 2008 Databases Restoring the databases is much more time consuming than just attaching them as you need to do them one at a time. But you may be taking a backup of an operational database and need to restore all your databases to a particular point in time instead of to the latest. I am doing latest unless I encounter any problems. Figure: Restore each of the databases to either a latest or specific point in time.     Figure: Restore all of the required databases Now that all of your databases are restored you now need to upgrade them to Team Foundation Server 2010. Upgrade Team Foundation Server 2008 Databases This is probably the easiest part of the process. You need to call a fire and forget command that will go off to the database specified, find the TFS 2008 databases and upgrade them to 2010. During this process all of the 6 main TFS 2008 databases are merged into the TfsVersionControl database, upgraded and then the database is renamed to TFS_[CollectionName]. The rename is only the database and not the physical files, so it is worth going back and renaming the physical file as well. This keeps everything neat and tidy. If you plan to keep the old TFS 2008 server around, for example if you are doing a test migration first, then you will need to change the TFS GUID. This GUID is unique to each TFS instance and is preserved when you upgrade. This GUID is used by the clients and they can get a little confused if there are two servers with the same one. To kick of the upgrade you need to open a command prompt and change the path to “C:\Program Files\Microsoft Team Foundation Server 2010\Tools” and run the “import” command in  “tfsconfig”. TfsConfig import /sqlinstance:<Previous TFS Data Tier>                  /collectionName:<Collection Name>                  /confirmed Imports a TFS 2005 or 2008 data tier as a new project collection. Important: This command should only be executed after adequate backups have been performed. After you import, you will need to configure portal and reporting settings via the administration console. EXAMPLES -------- TfsConfig import /sqlinstance:tfs2008sql /collectionName:imported /confirmed TfsConfig import /sqlinstance:tfs2008sql\Instance /collectionName:imported /confirmed OPTIONS: -------- sqlinstance         The sql instance of the TFS 2005 or 2008 data tier. The TFS databases at that location will be modified directly and will no longer be usable as previous version databases.  Ensure you have back-ups. collectionName      The name of the new Team Project Collection. confirmed           Confirm that you have backed-up databases before importing. This command will automatically look for the TfsIntegration database and verify that all the other required databases exist. In this case it took around 5 minutes to complete the upgrade as the total database size was under 700MB. This was unlike the upgrade of SSW’s production database with over 17GB of data which took a few hours. At the end of the process you should get no errors and no warnings. The Upgrade operation on the ApplicationTier feature has completed. There were 0 errors and 0 warnings. As this is a new server and not a pure upgrade there should not be a problem with the GUID. If you think at any point you will be doing this more than once, for example doing a test migration, or merging many TFS 2008 instances into a single one, then you should go back and rename the physical TfsVersionControl.mdf file to the same as the new collection. This will avoid confusion later down the line. To do this, detach the new collection from the server and rename the physical files. Then reattach and change the physical file locations to match the new name. You can follow http://www.mssqltips.com/tip.asp?tip=1122 for a more detailed explanation of how to do this. Figure: Stop the collection so TFS does not take a wobbly when we detach the database. When you try to start the new collection again you will get a conflict with project names and will require to remove the Test Upgrade collection. This is fine and it just needs detached. Figure: Detaching the test upgrade from the new Team Foundation Server 2010 so we can start the new Collection again. You will now be able to start the new upgraded collection and you are ready for testing. Do you remember the stats we took off the TFS 2008 server? TFS2008 File count: Type Count 1 1845 2 15770 Areas & Iterations: 139 Well, now we need to compare them to the TFS 2010 stats, remembering that there will probably be more files under source control. TFS2010 File count: Type Count 1 19288 Areas & Iterations: 139 Lovely, the number of iterations are the same, and the number of files is bigger. Just what we were looking for. Testing the upgraded Team Foundation Server 2010 Project Collection Can we connect to the new collection and project? Figure: We can connect to the new collection and project.   Figure: make sure you can connect to The upgraded projects and that you can see all of the files. Figure: Team Web Access is there and working. Note that for Team Web Access you now use the same port and URL as for TFS 2010. So in this case as I am running on the local box you need to use http://localhost:8080/tfs which will redirect you to http://localhost:8080/tfs/web for the web access. If you need to connect with a Visual Studio 2008 client you will need to use the full path of the new collection, http://[servername]/tfs/[collectionname] and this will work with all of your collections. With Visual Studio 2005 you will only be able to connect to the Default collection and in both VS2008 and VS2005 you will need to install the forward compatibility updates. Visual Studio Team System 2005 Service Pack 1 Forward Compatibility Update for Team Foundation Server 2010 Visual Studio Team System 2008 Service Pack 1 Forward Compatibility Update for Team Foundation Server 2010 To make sure that you have everything up to date, make sure that you run SSW Diagnostics and get all green ticks. Upgrade Done! At this point you can send out a notice to everyone that the upgrade is complete and and give them the connection details. You need to remember that at this stage we have 2008 project upgraded to run under TFS 2010 but it is still running under that same process template that it was running before. You can only “enable” 2010 features in a process template you can’t upgrade. So what to do? Well, you need to create a new project and migrate things you want to keep across. Souse code is easy, you can move or Branch, but Work Items are more difficult as you can’t move them between projects. This instance is complicated more as the old project uses the Conchango/EMC Scrum for Team System template and I will need to write a script/application to get the work items across with their attachments in tact. That is my next task! Technorati Tags: TFS 2010,TFS 2008,VS ALM

    Read the article

  • Fix Problems Upgrading Office 2010 Beta to RTM (Final) Release

    - by Mysticgeek
    There are several scenarios where you may run into trouble uninstalling the 2010 Beta and trying to install the RTM (final) release. Today we’ll cover the problems we ran into, and how to fix them. You would think upgrading from the Office 2010 Beta to the final release would be an easy process. Unfortunately, it’s not always that simple. In fact, we ran into three different scenarios where the install wasn’t smooth whatsoever. If you currently have the 2010 Beta installed, you have to remove it before you can install the RTM.  Here we’ll take a look at three different troublesome install scenarios we ran into, and how we fixed each one. Important Note: Before proceeding with any of these steps, make sure and backup your Outlook .pst files! Scenario 1 – Uninstall Office 2010 Beta & Fix Install Errors In this first scenario we have Office Professional Plus 2010 Beta 32-bit installed on a Windows 7 Home Premium 32-bit system. First try to uninstall the Office 2010 Beta by going into Control Panel and selecting Programs and Features. Scroll down to Microsoft Office Professional Plus 2010, right-click it and select Uninstall. Click Yes when the confirmation dialog box comes up. Wait while Office 2010 Beta uninstalls…the amount of time it takes will vary from system to system. To complete the uninstall process, a reboot is required. Fixing Setup Errors The problem is when you start the installation of the 2010 RTM… You get the following setup error even though you uninstalled the 2010 Beta. The problem is there are leftover Office apps or stand alone Office products. So, we need a utility that will clean them up for us.   Windows Installer Clean Up Utility Download and install the Clean Up Utility (link Below) following the defaults. After it’s installed you’ll find it in Start \ All Programs \ Windows Install Clean Up …go ahead and launch the utility. Now go through and remove all Office Programs or addins that you find in the list. Make sure you are just deleting Office apps and not something you need like Java for example. If you’re not sure what something is, doing a quick Google search should help you out. For instance we had the Office labs Ribbon Hero installed… just highlight and click Remove. Remove anything that has something to do with Office…then reboot your machine. Now, you should be able to begin the installation of Office 2010 RTM (Final) Release without any errors. If you do get an error during the install process, like this one telling us we have old version of Groove Server… Navigate to C:\Users\username\AppData\Local\Microsoft (where username is the computer name) and delete any existing MS Office folders. Then try the install again, this solved the problem in our first scenario. Scenario 2 – Not Being Able to Uninstall 2010 Beta from Programs and Features In this next scenario we have Office Professional Plus 2010 Beta 32-bit installed on a Windows 7 Home Premium 32-bit system. Another problem we ran into is not being able to uninstall the 2010 Beta from Programs and Features. When you go in to uninstall it, nothing happens. If you run into this problem, we again need to download and install the Windows Installer Clean Up Utility (link below) and manually uninstall the Beta. When you launch it, scroll down to Microsoft Office Professional Plus 2010 (Beta), highlight it and click Remove.   Click OK to the Warning Dialog box… If you see any other Office 2010, 2007, or 2003 entries you can hold the “Shift” key and highlight them all…then click Remove and click OK to the warning dialog. Now we need to delete some Registry settings. Click on Start and type regedit into the Search box and hit Enter. Navigate to HKEY_CURRENT_USER \ Software \ Microsoft \ Office and delete the folder. Then navigate to HKEY_LOCAL_MACHINE \ Software \ Microsoft \ Office and delete those keys as well. Now go into C:\Program Files and find any of these three folders…Microsoft Office, OfficeUpdate, or OfficeUpdate14…you might find one, two or all three. Either way just rename the folders with “_OLD” (without quotes) at the end. Then go into C:\Users\username\AppData\Local\Microsoft and delete any existing MS Office folders. Where in this example we have office, Office Labs, One Note…etc. Now we want to delete the contents of the Temp folder. Click on Start and type %temp% into the Search box and hit Enter. Use the key combination “Ctrl+A” to select all the files in this folder, then right-click and click Delete, or simply hit the Delete key. If you have some files that won’t delete, just skip them as they shouldn’t affect the Office install. Then empty the Recycle Bin and restart your machine. When you get back from the restart launch the Office 2010 RTM installer and you should be good to go with installation. Because we uninstalled the Office 2010 Beta manually, you may have some lingering blank icons that you’ll need to clean up. Scenario –3 Uninstall 2007 and Install 2010 32-Bit on x64 Windows 7 For this final scenario we are uninstalling Office Professional 2007 and installing Office Professional Plus 2010 32-Bit edition on a Windows Ultimate 64-bit computer. This machine actually had Office 2010 Beta 64-bit installed at one point also, it’s since been removed, and 2007 was reinstalled.  Go into Programs and Settings and uninstall Microsoft Office Professional 2007. Click Yes to the dialog box asking if you’re sure you want to uninstall it… Then wait while Office 2007 is uninstalled. The amount of time it takes will vary between systems. A restart is required to complete the process… Again we need to call upon the Windows Installer Clean Up Utility. Go through and delete any left over Office 2007 and 2010 entries. Click OK to the warning dialog that comes up. After that’s complete, navigate to HKEY_CURRENT_USER \ Software \ Microsoft \ Office and delete the folder. Then navigate to HKEY_LOCAL_MACHINE \ Software \ Microsoft \ Office and delete those keys as well. We still need to go into C:\Users\ username\AppData\ Local\ Microsoft (where username is the computer name) and delete any Office folders. In this example we have Outlook Connector, Office, and Outlook to delete. Now let’s delete the contents of the Temp folder by typing %temp% into the Search box in the Start Menu. Then delete all of the files and folders in the Temp directory. If you have some files that won’t delete, just skip them as they shouldn’t affect the Office install. Then empty the Recycle Bin and restart your machine. If you try to install the 2010 RTM at this point you might be able to begin the install, but may get the following Error 1402 message. To solve this issue, we opened the command prompt and ran the following: secedit /configure /cfg %windir%\inf\defltbase.inf /db defltbase.sdb /verbose After the command completes, kick off the Office 2010 (Final) RTM 32-bit edition. This solved the issue and Office 2010 installed successfully.   Conclusion Except for the final scenario, we found using the Windows Installer Clean Up Utility to come in very handy. Using that along with deleting a couple folders and registry settings did the trick. In the last one, we had to get a bit more geeky and use some command line magic, but it got the job done. After some extensive testing in our labs, the only time the upgrade to the RTM went smoothly was when we had a clean Vista or Windows 7 system with a fresh install of the 2010 beta only. However, chances are you went from 2003 or 2007 to the free 2010 Beta. You might also have addins or other Office products installed, so there are going to be a lot of different office files scattered throughout your PC. If that’s the case, you may run into the issues we covered here. These are a few scenarios where we got errors and were not able to install Office 2010 after removing the beta. There could be other problems, and if any of you have experienced different issues or have more good suggestions, leave a comment and let us know! Link Download Windows Installer Clean Up Utility Similar Articles Productive Geek Tips Remove Office 2010 Beta and Reinstall Office 2007How to Upgrade the Windows 7 RC to RTM (Final Release)Upgrading Ubuntu from Dapper to Edgy with Update ManagerDisable Office 2010 Beta Send-a-Smile from StartupAdd or Remove Apps from the Microsoft Office 2007 or 2010 Suite TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Case Study – How to Optimize Popular Wordpress Sites Restore Hidden Updates in Windows 7 & Vista Iceland an Insurance Job? Find Downloads and Add-ins for Outlook Recycle ! Find That Elusive Icon with FindIcons

    Read the article

  • CodePlex Daily Summary for Monday, March 15, 2010

    CodePlex Daily Summary for Monday, March 15, 2010New ProjectsAT Accounts: AT Accounts helps developers to intergrate accounting functionality in their applications. It has both the WPF userinterface and SilverlightChild page list(for dnn4/5): A free module which can display sub pages list for a selected tab. It is template based and support options like Recursive/Child tab prefix/link...dashCommerce: dashCommerce is the leading ASP.NET e-commerce platform.Fire Utilities: My Development Utiltites and base classes: New Zealand Bank Account ValidatorFlyCatch (Bugtracking System): A simple webbased Bugtracking System.fracback: Fractal feedback concepts, based on video feedbackftc3650: code for ftc 3650Google AJAX Search Services for jQuery: This plug-in encapsulates part of the Google AJAX Search API to streamline the process of Google Search integration.Little Black Book DB: This is the Database for the following Projects: SQL Azure PHP Connection SQL Azure Ruby Connection SQL Azure Python Connection SQL Azure .NE...MediaCommMVC: MediaCommMVC is a community platform focusing on photos, videos and discussions. It's based on ASP.NET MVC and uses (fluent) nhibernate, jquery an...Miracle OS: The Miracle OS is an OS from Fox. We work on it, but it isn't ready. Do you want help us? Please send a mail to victor@fox.fi.stMultiwfn: (1)Plotting various graph(filled color/contour/relief map...) (2)Generate Cube file (3)Manipulate & analyze wavefunction Supportting lots of proper...MySpace DataRelay: Data Relay is the foundation of MySpace's middle tier. At its heart, it is a messaging system for relaying information both between clients and ser...NinjaCMS: Ninja CMS is an asp.net based content management system which provides a designer friendly, developer friendly interface to work with. It's flexibl...open gaze and mouse analyzer: Ogama allows recording and analyzing eye- and mouse-tracking data from slideshow eyetracking experiments in parallel. It´s developed in C#.NET and ...Özkasoft.Net | E-Commerce: Özkasoft's E-Commerce ProjectProfiCV: Profi CVpyTarget: Implement a powerful iscsi target in python, and easily use under most popular systems. It also includes the following features: multi-target, mult...SharePoint Platform Extensions: SharePoint Platform Extensions by Espora. Sorting Algorithm Visualization: Sorting Algorithm Visualization Displays Bead Sort, Binary Tree Sort, Bubble Sort, Bucket Sort, Cocktail Sort, Counting Sort, Gnome Sort, In Place ...Specify: A framework for creating executable specifications in .NET. Spell Corrector: A spell corrector that uses Bayes algorithm and BK (Burkhard-Keller) tree.SQL Azure Ruby Connection: This is a demo to show how to connect to SQL Azure with Ruby on Rails.uManage - AD Self-Service Portal: uManage is an Active Directory Self-Service Portal as well as Help Desk web application designed for use on intranet systems. It allows users to u...Winforms Rounded Group Box Control: Rounded Group Box - A Grouping control with Rounded Corners, Gradients, and Drop ShadowWizard Engine: Host application agnostic wizard engine platform, that allows you to fluently define complex conditional flows and provides means for execution of ...WS-Transfer based File Upload: WS-Transer based upload of large files in multiple partsXAMLStylePad: XAMLStylePad - is a simple in use styles and templates XAML-editor. It designed for comfortable coding in XAML with real-time preview result on aut...Your Twitt Engine: Ovo je aplikacija za sve ljude koji su na svom radnom mjestu pod prismotrom poslodavca ili sefa, koji kontroliraju njihov monitor. Tako uz ovu apl...New ReleasesAmiBroker Plug-ins with C#. A non official AmiBroker Plug-in SDK: AniBroker Plug-in SDK v0.0.5: Removed dependency on .NET 4.0, now it works fine with .NET 2.0BeerMath.net: 0.1: Version 0.1Initial set of calculations supported: IBUs Color ABV/ABWChild page list(for dnn4/5): Child Page List 2.6: Source code is also include in module package.dashCommerce: dashCommerce Releases: You can download both Source and WebReady packages at http://www.dashcommerce.org. If you wish to submit patches, then use the Source Code tab her...ExcelDna: ExcelDna Version 0.23: ExcelDna Version 0.23 2010/03/14 - Packing and other features This release adds a number of features to ExcelDna: Add ExplicitExports attribute to ...Family Tree Analyzer: Version 1.0.7.1: Version 1.0.7.0 Update Census form to show family totals Fix England and Wales Lost Cousins reports to be England OR Wales Problems with Gedcom in...Foursquare BlogEngine Widget: foursquare widget for BlogEngine.NET Version 0.2: To see the changes which have been made, visit http://philippkueng.ch/post/Foursquare-BlogEngineNET-Widget-Version-02.aspx For installation instruc...GLB Virtual Player Builder: 0.4.0 Official Archetypes Release: Updated for new archetypes. The builder still includes the old player formats, and you can still import your old players' builds. Please PM me an...Home Access Plus+: v3.1.4.0: Version 3.1.3.1 Release Change Log: Added Breadcrumbs to My Computer File Changes: ~/bin/CHS Extranet.dll ~/bin/CHS Extranet.pdb ~/images/arro...Little Black Book DB: Little Black Book R1: This is the first release of the Little black book presentation I presented at Confoo. I decided to package the Database along with the Windows Az...mite.net - .NET API for mite: Version 1.2.1: Added Support for budget type Modified TimerMapper to return timers Fixed Encoding issue in xml conversionMultiwfn: multiwfn1.0: multiwfn1.0Multiwfn: multiwfn1.0_source: multiwfn1.0_sourceMultiwfn: multiwfn1.1: multiwfn1.1Multiwfn: multiwfn1.1_source: multiwfn1.1_sourceMultiwfn: multiwfn1.2: 1.2 2010-FEB-9 *加入了对10f型轨道的支持。 *新支持非限制性Post-HF波函数用以计算自旋密度。 *新增加直接读入高斯03/09的fch文件的支持,可以观看NBO轨道,详见readme实例4.10。 *绘制平面图时允许通过输入三个点坐标定义平面,允许自定义平面的原点与平移向...Multiwfn: multiwfn1.2_source: Include all the file that needed by compilation in CVF6.5PowerShell Community Extensions: 2.0 Beta 2: Release NotesThis is a pretty close to final release. We have eliminated all of the names that ran afound of the module loading mechanism which me...pyTarget: pyTarget.binary-for-windows-x86.rar: pyTarget.binary-for-windows-x86.rarpyTarget: pyTarget.src.tar.bz2: pyTarget.src.tar.bz2RedBulb for XNA Framework: RedBulbConsole (Console, Menu and TrackHUD Sample): http://bayimg.com/image/jalhmaacd.jpgScrum Sprint Monitor: 1.0.0.45262 (.NET 4.0 RC): Tested against TFS 2010 RC. For the .NET 3.5 SP1 platform, use the .NET 3.5 SP1 download. What is new in this release? Major performance increase ...sELedit: sELedit v1.1: Removed: Clone and Delete Button Added: Context Menu to Item List Added: Clone and Delete button to Context Menu Added: Export / Import Item ...Sorting Algorithm Visualization: Beta 1: Sorting Algorithm VisualizationSpecify: Version 1.0: Version 1.0Spell Corrector: Spell Corrector 0.1: A basic version that supports basic functionality.Spell Corrector: Spell Corrector 0.1 Source Code: Source code of version 0.1Spiral Architecture Driven Development (SADD): SADD v.0.9: Pre-final release with the NEW materials now all in English ! The Final release is coming soon. After guest column for SADD publication in MS Ar...Spiral Architecture Driven Development (SADD) for Russian: SADD v.0.9: Pre-final release with the NEW materials now all in English ! The Final release is coming soon. After guest column for SADD publication in MS Ar...SQL Azure Ruby Connection: Little Black Book Ruby R1: This is the Ruby Demo that I demostrated at Confoo. Special Thanks to Tony Thompson for putting this demo together. To check out Tony's Portfolio ...The Scrum Factory: The Scrum Factory Server - V1a: This is the newest version of the server. Some minor bugs from version v1 were fixed, and some slighted changed were made some database views.twNowplaying: twNowplaying 1.0.0.4: Please note that the user has to press the Twitter logo to log in the first time the application is started.uManage - AD Self-Service Portal: uManage - v1.0 (.NET 4.0 RC): Initial Release of uManage. NOTE: Designed for ASP.NET and .NET 4.0 RC ONLY! This is the initial release of uManage and covers the first phase of ...Virtu: Virtu 0.8: Source Requirements.NET Framework 3.5 with Service Pack 1 Visual Studio 2008 with Service Pack 1, or Visual C# 2008 Express Edition with Service Pa...Visual Studio DSite: Speech Synthesizer (Text to Speech) in Visual C++: A very simple text to speech program written in visual c 2008.White Tiger: 0.0.4.0: *now you can disable the file security checks *winforms aplications created to manage tablesWinforms Rounded Group Box Control: Release 1.0: To use this control simply add the class to your project and compile it. It will then show up in the projects components section in the toolbox. ...WS-Transfer based File Upload: 0.5: Implements the binary file transfer mechanism onlyXsltDb - DotNetNuke XSLT module: 01.00.89: Super modules configuration names. 16767 - Fixed more bug fixes...Yakiimo3D: DirectX11 Rheinhard Tonemapping Source and Binary: DirectX11 Rheinhard tonemapping source and binary.Your Twitt Engine: test: Slobodno probajte sa vasim twitter korisničkim računomMost Popular ProjectsMetaSharpWBFS ManagerRawrAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitASP.NET Ajax LibraryWindows Presentation Foundation (WPF)ASP.NETLiveUpload to FacebookMost Active ProjectsLINQ to TwitterRawrN2 CMSBlogEngine.NETpatterns & practices – Enterprise LibrarySharePoint Team-MailerjQuery Library for SharePoint Web ServicesCaliburn: An Application Framework for WPF and SilverlightFarseer Physics EngineCalcium: A modular application toolset leveraging Prism

    Read the article

  • CodePlex Daily Summary for Friday, April 30, 2010

    CodePlex Daily Summary for Friday, April 30, 2010New ProjectsAcres2: This is the new hotnessAsoraX.de - AirlineTycoon: EntwicklungsPhase von AsoraX.deazshop: Ecommerce macros and user controls based on Commerce4Umbraco from Umbraco CMS Project.BioPhotoAnalyzer: Some exercises with F#, WPF and Mathematical methods for quantitative analysis of biological photos, such as those obtained from microscopy, PAGE etcCECS622 - Simulations - South Computing Center: This simulation will be used to study the traffic flow of the South Computing Center (SCC) on the UofL campus. Document.Viewer: Basic document viewer for Windows XP, Vista and Windows 7 that supports FlowDocument, Rich and Plan Text FormatsDotNetNuke 5 Thai Language Pack: DotNetNuke Thai Language PackDotNetNuke Skins Pack: We derive html/css template from www.freecsstemplates.org and apply to DotNetNuke 4 & 5 Skins Pack.Dynamics AX Business Intelligence: Sample code for creating and using Dynamics AX Business Intelligence Easy Chat: Very simple kind of chat; it got DOS interface. It's just to start the server start the client enter the IP, enter your name, and you're ready to go!Html Source Transmitter Control: This web control allows getting a source of a web page, that will displayed before submit. So, developer can store a view of the html page, that wa...HydroServer - CUAHSI Hydrologic Information System Server: HydroServer is a set of software applications for publishing hydrologic datasets on the Internet. HydroServer leverages commercial software such a...Lisp.NET: Lisp.NET is a project that demonstrates how the Embedded Common Lisp (ECL) environment can be loaded and used from .NET. This enables Common Lisp ...Live-Exchange Calendar Sync: Live - Exchange Calendar Sync synchronizes calendars of users between 2 Exchange servers (it can be Live Calendar also). It's developed in C#. It u...MaLoRT : Mac Lovin' RayTracer: RaytracerMojo Workflow Web UI: Mojo Workflow Web UIMoonRover - Enter Island: Simple Graphics consumer application that simulates Moon RoversMVC Music Store: MVC Music Store is a tutorial application built on ASP.NET MVC 2. It's a lightweight sample store which sells albums online, demonstrating ASP.NET ...OpenPOS: OpenPOS, a completely open and free point-of-sale systemPgcDemuxCLI: A modified version of PgcDemux (http://download.videohelp.com/jsoto/dvdtools.htm) that has better CLI support and progress reporting.Sample 01: basic summarySharedEx: App dev in VS2010 RTM and Silverlight 4.0 for Windows Phone 7!SharePoint 2010 Managed Metadata WebPart: This SharePoint 2010 webpart creates a navigation control from a Managed Metadata column assigned to a list/library. The Termset the column relates...SharePoint 2010 Service Manager: The SharePoint Service manager let's you start and stop all the SharePoint 2010 services on your workstation. This is useful if you are running S...Sharp DOM: Sharp DOM is a view engine for ASP.NET MVC platform allowing developers to design extendable and maintenable dynamic HTML layouts using C# 4.0 lang...simple fx: simple framework written in javascriptSimpleGFC.NET: Simple GFC is a .NET library written in C# for simplifying the connection to Google Friend Connect. It is designed to be simple and concise, not a...SPSS & PSPP file library: Library for importing SPSS (now called PASW) & PSPP .sav datafiles, developed in C#. Support for writing and SPSS portable-files will be implemente...TailspinSpyworks - WebForms Sample Application: Tailspin Spyworks demonstrates how extraordinarily simple it is to create powerful, scalable applications for the .NET platform. It shows off how t...VividBed: Business website.卢融凯的个人主页: 卢融凯的个人主页New ReleasesAssemblyVerifier: 4.0.0.0 Release: Updated to target .NET 4.0Bricks' Bane: Bricks' Bane Editor v1.0.0.4: I've added functionality to the editor, after some personal use. Plus I fixed a bug that was occurring on file loading mostly when the file was mod...Dambach Linear Algebra Framework: Linear Algebra Framework - Sneak Peak: This is just to get the code out there into the hands of potential users and to elicit feedback.DevTreks -social budgeting that improves lives and livelihoods: Social Budgeting Web Software, DevTreks alpha 4a: DevTreks calculators, analyzers, and story tellers are being upgraded so that they can be extended by third parties using either add-ins (Managed ...DirectQ: Release 1.8.3c: Fixes some more late-breaking bugs and adds some optimizations from the forthcoming 1.8.4 release. No Windows 98 build this time. I may add one a...Document Assembly from a SharePoint Library using the Open XML SDK: Solution for March 2010 rel of the Open XML SDK: Microsoft changed some class names between the December 2009 CTP and the March 2010 release of the Open XML SDK which means that old solution will ...Document.Viewer: 0.9.0: Whats New?: New icon set Bug fix'sDotNetNuke Skins Pack: DNN 80 Skins Pack: This released is the first for DNN 4 & 5 with Skin Token Design (legacy skin support on DNN 4 & 5)DotNetWinService: Release 1.0.0.0: This release includes four different scheduled tasks: 1) TaskURL: Petition a specific URL: when working on a ASP.NET website, it's sometimes ...Hammock for REST: Hammock v1.0.1: v1.0.1 ChangesFixes to improve OAuth stability Fixes for asynchronous timeouts Fixes and simplification for retries v1.0 FeaturesSimple, clean...Home Access Plus+: v4.1.1: v4.1.1 Change Log: Added Enable for Booking Resource to allow Resources to be disabled but not deleted Updated HAP.Config for above File Changes...HouseFly controls: HouseFly controls alpha 0.9.6.0: HouseFly controls release 0.9.6.0 alphaHydroServer - CUAHSI Hydrologic Information System Server: ODM Data Loader 1.1.3: Version 1.1.3 of the ODM Data Loader is only compatible with version 1.1 of ODM This Version Addresses : Memory issues in Version 1.1.2 that were ...Jobping Url Shortener: Source Code v0.1: Source code for the 0.1 release.LinkedIn® for Windows Mobile: LinkedIn for Windows Mobile v0.6: Fixed the crash after accepting the use of internet access.mojoPortal: 2.3.4.3: see release notes on mojoportal.com http://www.mojoportal.com/mojoportal-2343-released.aspxMoonRover - Enter Island: Moon Rover: Simulates Rover Moves on MoonNanoPrompt: Release 0.4.1 - Beta 1.1: Now released: Beta 1.1 for .NET 4.0ORAYLIS BI.SmartDiff: Release 1.0.0: see change log for detailsQuickStart Engine (3D Game Engine for XNA): QuickStart Engine v0.22: Main FeaturesClean engine architecture Makes it easy to make your own game using the engine. Messaging system allows you to communicate between s...SharePoint 2010 Managed Metadata WebPart: Taxonomy WebPart 0.0.1: Initial version releasedSharePoint 2010 Service Manager: SharePoint Service Manager 2010 v1: Starts and stops all SharePoint services Works with both Microsoft SQL Server and SQL Server Express Edition (for SharePoint) Supports disablin...Shweet: SharePoint 2010 Team Messaging built with Pex: Shweet RTM Release: Shweet has been updated to work with the RTM of SharePoint and the latest version of Pex Visual Studio 2010 Power Tools. Know issues: Continuous I...Silverlight Testing Automation Tool: StatLight v1.0 - Beta 1: Things still to accomplish (before official v1 release)Item # 10716: Release build hangs on x64 machine Still awaiting UnitDriven change feedback...SPSS & PSPP file library: 0.1 alpha: This first test release allows to read an .sav SPSS/PSPP/PASW file and retreive the data, either in the form of a .net DataReader or as a custom Sp...SqlDiffFramework-A Visual Differencing Engine for Dissimilar Data Sources: SqlDiffFramework 1.0.0.0: Initial Public Release Requirements: .NET Framework 2.0 SqlDiffFramework is designed for the enterprise! Check with your system administrator (or...sqwarea: Sqwarea 0.0.210.0 (alpha): First public release. Deploy package contains : the documentation for classes. the azure package with the Web Role. the zip with assemblies wh...Sweeper: Sweeper Alpha 2: SweeperA Visual Studio Add-in for C# Code Formatting - Visual Studio 2008 Includes: A UI for options, Enable or disable any specific task you want ...TailspinSpyworks - WebForms Sample Application: TailspinSpyworks-v0.8: ASP.NET 4 ECommerce ApplicationTweetSharp: TweetSharp Release Candidate: New FeaturesComplete core rewrite for stability and speed, introducing Hammock http://hammock.codeplex.com Windows Phone 7, Silverlight 4 OOB (El...Wicked Compression ASP.NET HTTP Module: Wicked Compression ASP.NET HTTP Module Beta: Now supports AJAX from .NET Framework 2.0 through 4.0! Bug Fix for Excluded Paths! Binary Release Included for .NET Framework 2.0 through 4.0!Most Popular ProjectsRawrWBFS ManagerAJAX Control Toolkitpatterns & practices – Enterprise LibraryMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)iTuner - The iTunes CompanionASP.NETDotNetNuke® Community EditionMost Active ProjectsRawrpatterns & practices – Enterprise LibraryIonics Isapi Rewrite FilterHydroServer - CUAHSI Hydrologic Information System ServerGMap.NET - Great Maps for Windows Forms & PresentationParticle Plot Pivotpatterns & practices: Azure Security GuidanceSqlDiffFramework-A Visual Differencing Engine for Dissimilar Data SourcesNB_Store - Free DotNetNuke Ecommerce Catalog ModuleN2 CMS

    Read the article

  • Entity Framework version 1- Brief Synopsis and Tips &ndash; Part 1

    - by Rohit Gupta
    To Do Eager loading use Projections (for e.g. from c in context.Contacts select c, c.Addresses)  or use Include Query Builder Methods (Include(“Addresses”)) If there is multi-level hierarchical Data then to eager load all the relationships use Include Query Builder methods like customers.Include("Order.OrderDetail") to include Order and OrderDetail collections or use customers.Include("Order.OrderDetail.Location") to include all Order, OrderDetail and location collections with a single include statement =========================================================================== If the query uses Joins then Include() Query Builder method will be ignored, use Nested Queries instead If the query does projections then Include() Query Builder method will be ignored Use Address.ContactReference.Load() OR Contact.Addresses.Load() if you need to Deferred Load Specific Entity – This will result in extra round trips to the database ObjectQuery<> cannot return anonymous types... it will return a ObjectQuery<DBDataRecord> Only Include method can be added to Linq Query Methods Any Linq Query method can be added to Query Builder methods. If you need to append a Query Builder Method (other than Include) after a LINQ method  then cast the IQueryable<Contact> to ObjectQuery<Contact> and then append the Query Builder method to it =========================================================================== Query Builder methods are Select, Where, Include Methods which use Entity SQL as parameters e.g. "it.StartDate, it.EndDate" When Query Builder methods do projection then they return ObjectQuery<DBDataRecord>, thus to iterate over this collection use contact.Item[“Name”].ToString() When Linq To Entities methods do projection, they return collection of anonymous types --- thus the collection is strongly typed and supports Intellisense EF Object Context can track changes only on Entities, not on Anonymous types. If you use a Defining Query for a EntitySet then the EntitySet becomes readonly since a Defining Query is the same as a View (which is treated as a ReadOnly by default). However if you want to use this EntitySet for insert/update/deletes then we need to map stored procs (as created in the DB) to the insert/update/delete functions of the Entity in the Designer You can use either Execute method or ToList() method to bind data to datasources/bindingsources If you use the Execute Method then remember that you can traverse through the ObjectResult<> collection (returned by Execute) only ONCE. In WPF use ObservableCollection to bind to data sources , for keeping track of changes and letting EF send updates to the DB automatically. Use Extension Methods to add logic to Entities. For e.g. create extension methods for the EntityObject class. Create a method in ObjectContext Partial class and pass the entity as a parameter, then call this method as desired from within each entity. ================================================================ DefiningQueries and Stored Procedures: For Custom Entities, one can use DefiningQuery or Stored Procedures. Thus the Custom Entity Collection will be populated using the DefiningQuery (of the EntitySet) or the Sproc. If you use Sproc to populate the EntityCollection then the query execution is immediate and this execution happens on the Server side and any filters applied will be applied in the Client App. If we use a DefiningQuery then these queries are composable, meaning the filters (if applied to the entityset) will all be sent together as a single query to the DB, returning only filtered results. If the sproc returns results that cannot be mapped to existing entity, then we first create the Entity/EntitySet in the CSDL using Designer, then create a dummy Entity/EntitySet using XML in the SSDL. When creating a EntitySet in the SSDL for this dummy entity, use a TSQL that does not return any results, but does return the relevant columns e.g. select ContactID, FirstName, LastName from dbo.Contact where 1=2 Also insure that the Entity created in the SSDL uses the SQL DataTypes and not .NET DataTypes. If you are unable to open the EDMX file in the designer then note the Errors ... they will give precise info on what is wrong. The Thrid option is to simply create a Native Query in the SSDL using <Function Name="PaymentsforContact" IsComposable="false">   <CommandText>SELECT ActivityId, Activity AS ActivityName, ImagePath, Category FROM dbo.Activities </CommandText></FuncTion> Then map this Function to a existing Entity. This is a quick way to get a custom Entity which is regular Entity with renamed columns or additional columns (which are computed columns). The disadvantage to using this is that It will return all the rows from the Defining query and any filter (if defined) will be applied only at the Client side (after getting all the rows from DB). If you you DefiningQuery instead then we can use that as a Composable Query. The Fourth option (for mapping a READ stored proc results to a non-existent Entity) is to create a View in the Database which returns all the fields that the sproc also returns, then update the Model so that the model contains this View as a Entity. Then map the Read Sproc to this View Entity. The other option would be to simply create the View and remove the sproc altogether. ================================================================ To Execute a SProc that does not return a entity, use a EntityCommand to execute that proc. You cannot call a sproc FunctionImport that does not return Entities From Code, the only way is to use SSDL function calls using EntityCommand.  This changes with EntityFramework Version 4 where you can return Scalar Types, Complex Types, Entities or NonQuery ================================================================ UDF when created as a Function in SSDL, we need to set the Name & IsComposable properties for the Function element. IsComposable is always false for Sprocs, for UDF's set this to true. You cannot call UDF "Function" from within code since you cannot import a UDF Function into the CSDL Model (with Version 1 of EF). only stored procedures can be imported and then mapped to a entity ================================================================ Entity Framework requires properties that are involved in association mappings to be mapped in all of the function mappings for the entity (Insert, Update and Delete). Because Payment has an association to Reservation... hence we need to pass both the paymentId and reservationId to the Delete sproc even though just the paymentId is the PK on the Payment Table. ================================================================ When mapping insert, update and delete procs to a Entity, insure that all the three or none are mapped. Further if you have a base class and derived class in the CSDL, then you must map (ins, upd, del) sprocs to all parent and child entities in the inheritance relationship. Note that this limitation that base and derived entity methods must all must be mapped does not apply when you are mapping Read Stored Procedures.... ================================================================ You can write stored procedures SQL directly into the SSDL by creating a Function element in the SSDL and then once created, you can map this Function to a CSDL Entity directly in the designer during Function Import ================================================================ You can do Entity Splitting such that One Entity maps to multiple tables in the DB. For e.g. the Customer Entity currently derives from Contact Entity...in addition it also references the ContactPersonalInfo Entity. One can copy all properties from the ContactPersonalInfo Entity into the Customer Entity and then Delete the CustomerPersonalInfo entity, finall one needs to map the copied properties to the ContactPersonalInfo Table in Table Mapping (by adding another table (ContactPersonalInfo) to the Table Mapping... this is called Entity Splitting. Thus now when you insert a Customer record, it will automatically create SQL to insert records into the Contact, Customers and ContactPersonalInfo tables even though you have a Single Entity called Customer in the CSDL =================================================================== There is Table by Type Inheritance where another EDM Entity can derive from another EDM entity and absorb the inherted entities properties, for example in the Break Away Geek Adventures EDM, the Customer entity derives (inherits) from the Contact Entity and absorbs all the properties of Contact entity. Thus when you create a Customer Entity in Code and then call context.SaveChanges the Object Context will first create the TSQL to insert into the Contact Table followed by a TSQL to insert into the Customer table =================================================================== Then there is the Table per Hierarchy Inheritance..... where different types are created based on a condition (similar applying a condition to filter a Entity to contain filtered records)... the diference being that the filter condition populates a new Entity Type (derived from the base Entity). In the BreakAway sample the example is Lodging Entity which is a Abstract Entity and Then Resort and NonResort Entities which derive from Lodging Entity and records are filtered based on the value of the Resort Boolean field =================================================================== Then there is Table per Concrete Type Hierarchy where we create a concrete Entity for each table in the database. In the BreakAway sample there is a entity for the Reservation table and another Entity for the OldReservation table even though both the table contain the same number of fields. The OldReservation Entity can then inherit from the Reservation Entity and configure the OldReservation Entity to remove all Scalar Properties from the Entity (since it inherits the properties from Reservation and filters based on ReservationDate field) =================================================================== Complex Types (Complex Properties) Entities in EF can also contain Complex Properties (in addition to Scalar Properties) and these Complex Properties reference a ComplexType (not a EntityType) DropdownList, ListBox, RadioButtonList, CheckboxList, Bulletedlist are examples of List server controls (not data bound controls) these controls cannot use Complex properties during databinding, they need Scalar Properties. So if a Entity contains Complex properties and you need to bind those to list server controls then use projections to return Scalar properties and bind them to the control (the disadvantage is that projected collections are not tracked by the Object Context and hence cannot persist changes to the projected collections bound to controls) ObjectDataSource and EntityDataSource do account for Complex properties and one can bind entities with Complex Properties to Data Source controls and they will be tracked for changes... with no additional plumbing needed to persist changes to these collections bound to controls So DataBound controls like GridView, FormView need to use EntityDataSource or ObjectDataSource as a datasource for entities that contain Complex properties so that changes to the datasource done using the GridView can be persisted to the DB (enabling the controls for updates)....if you cannot use the EntityDataSource you need to flatten the ComplexType Properties using projections With EF Version 4 ComplexTypes are supported by the Designer and can add/remove/compose Complex Types directly using the Designer =================================================================== Conditional Mapping ... is like Table per Hierarchy Inheritance where Entities inherit from a base class and then used conditions to populate the EntitySet (called conditional Mapping). Conditional Mapping has limitations since you can only use =, is null and IS NOT NULL Conditions to do conditional mapping. If you need more operators for filtering/mapping conditionally then use QueryView(or possibly Defining Query) to create a readonly entity. QueryView are readonly by default... the EntitySet created by the QueryView is enabled for change tracking by the ObjectContext, however the ObjectContext cannot create insert/update/delete TSQL statements for these Entities when SaveChanges is called since it is QueryView. One way to get around this limitation is to map stored procedures for the insert/update/delete operations in the Designer. =================================================================== Difference between QueryView and Defining Query : QueryView is defined in the (MSL) Mapping File/section of the EDM XML, whereas the DefiningQuery is defined in the store schema (SSDL). QueryView is written using Entity SQL and is this database agnostic and can be used against any database/Data Layer. DefiningQuery is written using Database Lanaguage i.e. TSQL or PSQL thus you have more control =================================================================== Performance: Lazy loading is deferred loading done automatically. lazy loading is supported with EF version4 and is on by default. If you need to turn it off then use context.ContextOptions.lazyLoadingEnabled = false To improve Performance consider PreCompiling the ObjectQuery using the CompiledQuery.Compile method

    Read the article

  • Stream Media and Live TV Across the Internet with Orb

    - by DigitalGeekery
    Looking for a way to stream your media collection across the Internet? Or perhaps watch and record TV remotely? Today we are going to look at how to do all that and more with Orb. Requirements Windows XP / Vista / 7 or Intel based Mac w/ OS X 10.5 or later. 1 GB RAM or more Pentium 4 2.4 GHz or higher / AMD Athlon 3200+ Broadband connections TV Tuner for streaming and recording live TV (optional) Note: Slower internet connections may result in stuttering during playback. Installation and Setup Download and install Orb on your home computer. (Download link below) You’ll want to take the defaults for the initial portion of the install. When we get to the Orb Account setup portion of the install is when we will have to enter information and make some decisions. Choose your language and click Next. We’ll need to create and user account and password. A valid email address is required as we’ll need to confirm the account later. Click Next.   Now you’ll want to choose your media sources. Orb will automatically look for folders that may contain media files. You can add or remove folders click on the (+) or (-) buttons. To remove a folder, click on it once to select it from the list and then click the minus (-) button. To add a folder, click the plus (+) button and browse for the folder. You can add local folders as well as shared folders from networked computers and USB attached storage. Note: Both the host computer running Orb and the networked computer will need to be running to access shared network folders remotely. When you’ve selected all your media files, click Next. Orb will proceed to index your media files… When the indexing is complete, click Next. Orb TV Setup Note: Streaming Live TV to Macs is not currently supported. If you have a TV tuner card connected to your PC, you can opt to configure Orb to stream live or recorded TV. Click Next  to configure TV. Or, choose Skip if you don’t wish to configure Orb for TV.   If you have a Digital tuner card, type in your Zip Code and click Get List to pull your channel listings. Select a TV provider from the list and click Next. If not, click Skip.   You can select or deselect any channels by checking or un-checking the box to each channel. Select Auto Scan to let Orb find more channels or disable the ones with no reception. Click Next when finished.   Next choose an analog provider, if necessary, and click Next.   Select “Yes” or “No” for a set top box and click Next. Just as we did with the Digital tuner, select or deselect any channels by checking or un-checking the box to each channel. Select Auto Scan to let Orb find more channels or disable the ones with no reception. Click Next when finished.   Now we’re finished with the setup. Click Close. Accessing your Media Remotely Media files are accessed through a web-based interface. Before we go any further, however, we’ll need to confirm our username and password. Check your inbox for an email from Orb Networks. Click the enclosed confirmation link. You’ll be prompted to enter the username and password you selected in your browser then click Next.   Your account will be confirmed. Now, we’re ready to enjoy our media remotely. To get started, point your browser to the MyCast website from your remote computer. (See link below) Enter your credentials and click Log In. Once logged in, you’ll be presented with the MyCast Home screen. By default you’ll see a handful of “channels” such as a TV program guide, random audio and photos, video favorites, and weather. You can add, remove, or customize channels. To add additional channels, click on Add Channels at the top right…   …and select from the dropdown list. To access your full media libraries, click Open Application at the top left and select from one of the options. Live and Recorded TV If you have a TV tuner card you configured for Orb, you’ll see your program guide on the TV / Webcams screen. To watch or record a show, click on the program listing to bring up a detail box. Then click the red button to record, or the green button to play. When recording a show, you’ll see a pulsating red icon at the top right of the listing in the program guide. If you want to watch Live TV, you may be prompted to choose your media player, depending on your browser and settings. Playback should begin shortly.   Note for Windows Media Center Users If you try to stream live TV in Orb while Windows Media Center is running on your PC, you’ll get an error message. Click the Stop MediaCenter button and then try again.   Audio On the Audio screen, you’ll find your music files indexed by genre, artist, and album. You can play a selection by clicking once and then clicking the green play button, or by simply double-clicking.   Playback will begin in the default media player for the streaming format.   Video Video works essentially the same as audio. Click on a selection and press the green play button, or double-click on the video title. Video playback will begin in the default media player for the streaming format.   Streaming Formats You can change the default streaming format in the control panel settings. To access the Control Panel, click on Open Applications  and select Control Panel. You can also click Settings at the top right.   Select General from the drop down list and then click on the Streaming Formats tab. You are provided four options. Flash, Windows Media, .SDP, and .PLS.   Creating Playlists To create playlists, drag and drop your media title to the playlist work area on the right, or click Add to playlist on the top menu. Click Save when finished.    Sharing your Media Orb allows you to share media playlists across the Internet with friends and family. There are a few ways to accomplish this. We’ll start by click the Share button at the bottom of the playlist work area after you’ve compiled your playlist. You’ll be prompted to choose a method by which to share your playlist. You’ll have the option to share your playlist publicly or privately. You can share publically through links, blogs, or on your Orb public profile.  By choosing the Public Profile option, Orb will automatically create a profile page for you with a URL like http://public.orb.com/username that anyone can easily access on the Internet. The private sharing option allows you to invite friends by email and requires recipients to register with Orb. You can also give your playlist a custom name, or accept the auto-generated title. Click OK when finished. Users who visit your public profile will be able to view and stream any of your shared playlists to their computer or supported device.   Portable Media Devices and Smartphones Orb can stream media to many portable devices and 3G phones. Streaming audio is supported on the iPhone and iPod Touch through the Safari browser. However, video and live TV streaming requires the Orb Live iPhone App.  Orb Live is available in the App store for $9.99. To stream media to your portable device, go to the MyCast website in your mobile browser and login. Browse for your media or playlist. Make a selection and play the media. Playback will begin. We found streaming music to both the Droid and the iPhone to work quite nicely. Video playback on the Droid, however, left a bit to be desired. The video looked good, but the audio tended to be out of sync. System Tray Control Panel By default Orb runs in the system tray on start up. To access the System Tray Control Panel, right-click on the Orb icon in the system tray and select Control Panel. Login with your Orb username and  password and click OK.   From here you can add or remove media sources, add manage accounts, change your password, and more. If you’d rather not run Orb on Startup, click the General icon.   Unselect the checkbox next to Start Orb when the system starts. Conclusion It may seem like a lot of steps, but getting Orb up and running isn’t terribly difficult. Orb is available for both Windows and Intel based Macs. It also supports streaming to many Game Consoles such as the Wii, PS3, and XBox 360. If you are running Windows 7 on multiple computers, you may want to check out our write-up on how to stream music and video over the Internet with Windows Media Player 12. Downloads Download Orb Logon to MyCast Similar Articles Productive Geek Tips Stream Music and Video Over the Internet with Windows Media Player 12Enable Media Streaming in Windows Home Server to Windows Media PlayerStream Media from Windows 7 to XP with VLC Media PlayerShare Digital Media With Other Computers on a Home Network with Windows 7Automatically Start Windows 7 Media Center in Live TV Mode TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Looking for Good Windows Media Player 12 Plug-ins? Find Out the Celebrity You Resemble With FaceDouble Whoa ! Use Printflush to Solve Printing Problems Icelandic Volcano Webcams Open Multiple Links At One Go

    Read the article

  • Pluralsight Meet the Author Podcast on HTML5 Canvas Programming

    - by dwahlin
      In the latest installment of Pluralsight’s Meet the Author podcast series, Fritz Onion and I talk about my new course, HTML5 Canvas Fundamentals.  In the interview I describe different canvas technologies covered throughout the course and a sample application at the end of the course that covers how to build a custom business chart from start to finish. Meet the Author:  Dan Wahlin on HTML5 Canvas Fundamentals   Transcript [Fritz] Hi. This is Fritz Onion. I’m here today with Dan Wahlin to talk about his new course HTML5 Canvas Fundamentals. Dan founded the Wahlin Group, which you can find at thewahlingroup.com, which specializes in ASP.NET, jQuery, Silverlight, and SharePoint consulting. He’s a Microsoft Regional Director and has been awarded Microsoft’s MVP for ASP.NET, Connected Systems, and Silverlight. Dan is on the INETA Bureau’s — Speaker’s Bureau, speaks at conferences and user groups around the world, and has written several books on .NET. Thanks for talking to me today, Dan. [Dan] Always good to talk with you, Fritz. [Fritz] So this new course of yours, HTML5 Canvas Fundamentals, I have to say that most of the really snazzy demos I’ve seen with HTML5 have involved Canvas, so I thought it would be a good starting point to chat with you about why we decided to create a course dedicated just to Canvas. If you want to kind of give us that perspective. [Dan] Sure. So, you know, there’s quite a bit of material out there on HTML5 in general, and as people that have done a lot with HTML5 are probably aware, a lot of HTML5 is actually JavaScript centric. You know, a lot of people when they first learn it, think it’s tags, but most of it’s actually JavaScript, and it just so happens that the HTML5 Canvas is one of those things. And so it’s not just, you know, a tag you add and it just magically draws all these things. You mentioned there’s a lot of cool things you can do from games to there’s some really cool multimedia applications out there where they integrate video and audio and all kinds of things into the Canvas, to more business scenarios such as charting and things along those lines. So the reason we made a course specifically on it is, a lot of the material out there touches on it but the Canvas is actually a pretty deep topic. You can do some pretty advanced stuff or easy stuff depending on what your application requirements are, and the API itself, you know, there’s over 30 functions just in the Canvas API and then a whole set of properties that actually go with that as well. So it’s a pretty big topic, and that’s why we created a course specifically tailored towards just the Canvas. [Fritz] Right. And let’s — let me just review the outline briefly here for everyone. So you start off with an introduction to getting started with Canvas, drawing with the HTML5 Canvas, then you talk about manipulating pixels, and you finish up with building a custom data chart. So I really like your example flow here. I think it will appeal to even business developers, right. Even if you’re not into HTML5 for the games or the media capabilities, there’s still something here for everyone I think working with the Canvas. Which leads me to another question, which is, where do you see the Canvas fitting in to kind of your day-to-day developer, people that are working business applications and maybe vanilla websites that aren’t doing kind of cutting edge stuff with interactivity with users? Is there a still a place for the Canvas in those scenarios? [Dan] Yeah, definitely. I think a lot of us — and I include myself here — over the last few years, the focus has generally been, especially if you’re, let’s say, a PHP or ASP.NET or Java type of developer, we’re kind of accustomed to working on the server side, and, you know, we kind of relied on Flash or Silverlight or these other plug-ins for the client side stuff when it was kind of fancy, like charts and graphs and things along those lines. With the what I call massive shift of applications, you know, mainly because of mobile, to more of client side, one of the big benefits I think from a maybe corporate standard way of thinking of things, since we do a lot of work with different corporations, is that, number one, rather than having to have the plug-in, which of course isn’t going to work on iPad and some of these other devices out there that are pretty popular, you can now use a built-in technology that all the modern browsers support, and that includes things like Safari on the iPad and iPhone and the Android tablets and things like that with their browsers, and actually render some really sophisticated charts. Whether you do it by scratch or from scratch or, you know, get a third party type of library involved, it’s just JavaScript. So it downloads fast so it’s good from a performance perspective; and when it comes to what you can render, it’s extremely robust. You can do everything from, you know, your basic circles to polygons or polylines to really advanced gradients as well and even provide some interactivity and animations, and that’s some of the stuff I touch upon in the class. In fact, you mentioned the last part of the outline there is building a custom data chart and that’s kind of gears towards more of the, what I’d call enterprise or corporate type developer. [Fritz] Yeah, that makes sense. And it’s, you know, a lot of the demos I’ve seen with HTML5 focus on more the interactivity and kind of game side of things, but the Canvas is such a diverse element within HTML5 that I can see it being applicable pretty much anywhere. So why don’t we talk a little bit about some of the specifics of what you cover? You talk about drawing and then manipulating pixels. You want to kind of give us the different ways of working with the Canvas and what some of those APIs provide for you? [Dan] Sure. So going all the way back to the start of the outline, we actually started off by showing different demonstrations of the Canvas in action, and we show some fun stuff — multimedia apps and games and things like that — and then also some more business scenarios; and then once you see that, hopefully it kinds of piques your interest and you go, oh, wow, this is actually pretty phenomenal what you can do. So then we start you off with, so how to you actually draw things. Now, there are some libraries out there that will draw things like graphs, but if you want to customize those or just build something you have from scratch, you need to know the basics, such as, you know, how do you draw circles and lines and arcs and Bezier curves and all those fancy types of shapes that a given chart may have on it or that a game may have in it for that matter. So we start off by covering what I call the core API functions; how do you, for instance, fill a rectangle or convert that to a square by setting the height and the width; how do you draw arcs or different types of curves and there’s different types supported such as I mentioned Bezier curves or quadratic curves; and then we also talk about how do you integrate text into it. You might have some images already that are just regular bitmap type images that you want to integrate, you can do that with a Canvas. And you can even sync video into the Canvas, which actually opens up some pretty interesting possibilities for both business and I think just general multimedia apps. Once you kind of get those core functions down for the basic shapes that you need to be able to draw on any type of Canvas, then we go a little deeper into what are the pixels that are there to manipulate. And that’s one of the important things to understand about the HTML5 Canvas, scalable vector graphics is another thing you can use now in the modern browsers; it’s vector based. Canvas is pixel based. And so we talk about how to do gradients, how can you do transforms, you know, how do you scale things or rotate things, which is extremely useful for charts ’cause you might have text that, you know, flips up on its side for a y-axis or something like that. And you can even do direct pixel manipulation. So it’s really, really powerful. If you want to get down to the RGBA level, you can do that, and I show how to do that in the course, and then kind of wrap that section up with some animation fundamentals. [Fritz] Great. Yeah, that’s really powerful stuff for programmatically rendering data to clients and responding to user inputs. Look forward to seeing what everyone’s going to come up with building this stuff. So great. That’s — that’s HTML5 Canvas Fundamentals with Dan Wahlin. Thanks very much, Dan. [Dan] Thanks again. I appreciate it.

    Read the article

  • ASP.NET MVC: Using jQuery context menu with tables

    - by DigiMortal
    I needed to add context menus to some tables of my intranet application. After trying some components I found one that does everything I need and has no overhead. In this posting I will show you how to use jQuery context menu plug-in and how to attach it to tables. I found context menu plug-in by Chris Domigan and it was very easy to integrate to my application (when comparing some other plug-ins that work only on demo pages and in simple scenarios). Thanks, Chris, for great work! Now let’s use this context menu plug-in with table. Before we go on let’s see what we are trying to achieve. The following screenshot fragment shows simple context menu that we want to attach to our table. And when we click some menu option then something should happen too. :) Installing context menu plug-in Download plug-in (if download link is broken then open demo page and I think you know how to get plug-in from there). Copy jquery.contextmenu.js to your scripts folder. Include it in your masterpage or in the page where you plan to use context menus. Make sure plug-in is included correctly (use Firebug or some other tool you like). Save the page. Defining context menu Now let’s define context menu. Here is fragment on context menu definition from my code. <div class="contextMenu" id="myMenu1">     <ul>     <li id="email"><img src="/img/e-mail.png" />E-mail</li>     <li id="homepage"><img src="/img/homepage.png" />Homepage</li>     </ul> </div> div with id myMenu1 is container of context menu. Unordered list inside container defines items in context menu – simple and elegant! Adding context menu to table I have table with persons. It is simple HTML. I omitted commands column from this and the next table to keep them simple and more easily readable. <table>   <tr>     <th>Name</th>     <th>Short</th>     <th>Address</th>     <th>Mobile</th>     <th>E-mail</th>   </tr>   <% foreach(var person in Model.Results) { %>   <tr>     <td><%=person.FullName %></td>     <td><%=person.ShortName %></td>     <td><%=person.FullAddress %></td>     <td><%=person.Mobile %></td>     <td><%=person.Email %></td>   </tr>   <% } %> </table> To get context menu linked to table rows first cells we need to specify class for cells and ID. We need ID because we have to know later which ID has the row on which user selected something from context menu. <table>   <tr>     <th>Name</th>     <th>Short</th>     <th>Address</th>     <th>Mobile</th>     <th>E-mail</th>   </tr>   <% foreach(var person in Model.Results) { %>   <tr>     <td class="showContext" id="<%= person.Id %>"><%=person.FullName %></td>     <td><%=person.ShortName %></td>     <td><%=person.FullAddress %></td>     <td><%=person.Mobile %></td>     <td><%=person.Email %></td>   </tr>   <% } %> </table> Now we have only one thing to do – we have to write some code that attaches context menu to table cells. Catching context menu events Now we will make everything work. Relax, it is only couple of lines of code, thank to jQuery. <script type="text/javascript">   $(document).ready(function () {     $('td.showContext').contextMenu('myMenu1', {         bindings: {         'email': function (t) {           document.location.href = '/contact/sendmail/' + t.id;         },         'homepage': function (t) {           document.location.href = '/contact/homepage/' + t.id;         }       }     });   }); </script> I think that first lines doesn’t need any comments. Take a look at bindings. We gave ID to table cells because it is carried also to bound events. We can use also more complex ID-s if we have more than one table with context menus on our form. Now we are done. Save all files, compile solution, run it and try out how context menu works. Conclusion We saw than using jQuery with context menu component allows us easily create powerful context menus for our user interfaces. Context menu was very easy to define. We were also able to attach context menu to table and use ID of current row entity also in events of context menu. To achieve this we needed only some minor modifications in view and couple of lines of JavaScript.

    Read the article

  • Recover Data Like a Forensics Expert Using an Ubuntu Live CD

    - by Trevor Bekolay
    There are lots of utilities to recover deleted files, but what if you can’t boot up your computer, or the whole drive has been formatted? We’ll show you some tools that will dig deep and recover the most elusive deleted files, or even whole hard drive partitions. We’ve shown you simple ways to recover accidentally deleted files, even a simple method that can be done from an Ubuntu Live CD, but for hard disks that have been heavily corrupted, those methods aren’t going to cut it. In this article, we’ll examine four tools that can recover data from the most messed up hard drives, regardless of whether they were formatted for a Windows, Linux, or Mac computer, or even if the partition table is wiped out entirely. Note: These tools cannot recover data that has been overwritten on a hard disk. Whether a deleted file has been overwritten depends on many factors – the quicker you realize that you want to recover a file, the more likely you will be able to do so. Our setup To show these tools, we’ve set up a small 1 GB hard drive, with half of the space partitioned as ext2, a file system used in Linux, and half the space partitioned as FAT32, a file system used in older Windows systems. We stored ten random pictures on each hard drive. We then wiped the partition table from the hard drive by deleting the partitions in GParted. Is our data lost forever? Installing the tools All of the tools we’re going to use are in Ubuntu’s universe repository. To enable the repository, open Synaptic Package Manager by clicking on System in the top-left, then Administration > Synaptic Package Manager. Click on Settings > Repositories and add a check in the box labelled “Community-maintained Open Source software (universe)”. Click Close, and then in the main Synaptic Package Manager window, click the Reload button. Once the package list has reloaded, and the search index rebuilt, search for and mark for installation one or all of the following packages: testdisk, foremost, and scalpel. Testdisk includes TestDisk, which can recover lost partitions and repair boot sectors, and PhotoRec, which can recover many different types of files from tons of different file systems. Foremost, originally developed by the US Air Force Office of Special Investigations, recovers files based on their headers and other internal structures. Foremost operates on hard drives or drive image files generated by various tools. Finally, scalpel performs the same functions as foremost, but is focused on enhanced performance and lower memory usage. Scalpel may run better if you have an older machine with less RAM. Recover hard drive partitions If you can’t mount your hard drive, then its partition table might be corrupted. Before you start trying to recover your important files, it may be possible to recover one or more partitions on your drive, recovering all of your files with one step. Testdisk is the tool for the job. Start it by opening a terminal (Applications > Accessories > Terminal) and typing in: sudo testdisk If you’d like, you can create a log file, though it won’t affect how much data you recover. Once you make your choice, you’re greeted with a list of the storage media on your machine. You should be able to identify the hard drive you want to recover partitions from by its size and label. TestDisk asks you select the type of partition table to search for. In most cases (ext2/3, NTFS, FAT32, etc.) you should select Intel and press Enter. Highlight Analyse and press enter. In our case, our small hard drive has previously been formatted as NTFS. Amazingly, TestDisk finds this partition, though it is unable to recover it. It also finds the two partitions we just deleted. We are able to change their attributes, or add more partitions, but we’ll just recover them by pressing Enter. If TestDisk hasn’t found all of your partitions, you can try doing a deeper search by selecting that option with the left and right arrow keys. We only had these two partitions, so we’ll recover them by selecting Write and pressing Enter. Testdisk informs us that we will have to reboot. Note: If your Ubuntu Live CD is not persistent, then when you reboot you will have to reinstall any tools that you installed earlier. After restarting, both of our partitions are back to their original states, pictures and all. Recover files of certain types For the following examples, we deleted the 10 pictures from both partitions and then reformatted them. PhotoRec Of the three tools we’ll show, PhotoRec is the most user-friendly, despite being a console-based utility. To start recovering files, open a terminal (Applications > Accessories > Terminal) and type in: sudo photorec To begin, you are asked to select a storage device to search. You should be able to identify the right device by its size and label. Select the right device, and then hit Enter. PhotoRec asks you select the type of partition to search. In most cases (ext2/3, NTFS, FAT, etc.) you should select Intel and press Enter. You are given a list of the partitions on your selected hard drive. If you want to recover all of the files on a partition, then select Search and hit enter. However, this process can be very slow, and in our case we only want to search for pictures files, so instead we use the right arrow key to select File Opt and press Enter. PhotoRec can recover many different types of files, and deselecting each one would take a long time. Instead, we press “s” to clear all of the selections, and then find the appropriate file types – jpg, gif, and png – and select them by pressing the right arrow key. Once we’ve selected these three, we press “b” to save these selections. Press enter to return to the list of hard drive partitions. We want to search both of our partitions, so we highlight “No partition” and “Search” and then press Enter. PhotoRec prompts for a location to store the recovered files. If you have a different healthy hard drive, then we recommend storing the recovered files there. Since we’re not recovering very much, we’ll store it on the Ubuntu Live CD’s desktop. Note: Do not recover files to the hard drive you’re recovering from. PhotoRec is able to recover the 20 pictures from the partitions on our hard drive! A quick look in the recup_dir.1 directory that it creates confirms that PhotoRec has recovered all of our pictures, save for the file names. Foremost Foremost is a command-line program with no interactive interface like PhotoRec, but offers a number of command-line options to get as much data out of your had drive as possible. For a full list of options that can be tweaked via the command line, open up a terminal (Applications > Accessories > Terminal) and type in: foremost –h In our case, the command line options that we are going to use are: -t, a comma-separated list of types of files to search for. In our case, this is “jpeg,png,gif”. -v, enabling verbose-mode, giving us more information about what foremost is doing. -o, the output folder to store recovered files in. In our case, we created a directory called “foremost” on the desktop. -i, the input that will be searched for files. This can be a disk image in several different formats; however, we will use a hard disk, /dev/sda. Our foremost invocation is: sudo foremost –t jpeg,png,gif –o foremost –v –i /dev/sda Your invocation will differ depending on what you’re searching for and where you’re searching for it. Foremost is able to recover 17 of the 20 files stored on the hard drive. Looking at the files, we can confirm that these files were recovered relatively well, though we can see some errors in the thumbnail for 00622449.jpg. Part of this may be due to the ext2 filesystem. Foremost recommends using the –d command-line option for Linux file systems like ext2. We’ll run foremost again, adding the –d command-line option to our foremost invocation: sudo foremost –t jpeg,png,gif –d –o foremost –v –i /dev/sda This time, foremost is able to recover all 20 images! A final look at the pictures reveals that the pictures were recovered with no problems. Scalpel Scalpel is another powerful program that, like Foremost, is heavily configurable. Unlike Foremost, Scalpel requires you to edit a configuration file before attempting any data recovery. Any text editor will do, but we’ll use gedit to change the configuration file. In a terminal window (Applications > Accessories > Terminal), type in: sudo gedit /etc/scalpel/scalpel.conf scalpel.conf contains information about a number of different file types. Scroll through this file and uncomment lines that start with a file type that you want to recover (i.e. remove the “#” character at the start of those lines). Save the file and close it. Return to the terminal window. Scalpel also has a ton of command-line options that can help you search quickly and effectively; however, we’ll just define the input device (/dev/sda) and the output folder (a folder called “scalpel” that we created on the desktop). Our invocation is: sudo scalpel /dev/sda –o scalpel Scalpel is able to recover 18 of our 20 files. A quick look at the files scalpel recovered reveals that most of our files were recovered successfully, though there were some problems (e.g. 00000012.jpg). Conclusion In our quick toy example, TestDisk was able to recover two deleted partitions, and PhotoRec and Foremost were able to recover all 20 deleted images. Scalpel recovered most of the files, but it’s very likely that playing with the command-line options for scalpel would have enabled us to recover all 20 images. These tools are lifesavers when something goes wrong with your hard drive. If your data is on the hard drive somewhere, then one of these tools will track it down! Similar Articles Productive Geek Tips Recover Deleted Files on an NTFS Hard Drive from a Ubuntu Live CDUse an Ubuntu Live CD to Securely Wipe Your PC’s Hard DriveReset Your Ubuntu Password Easily from the Live CDBackup Your Windows Live Writer SettingsAdding extra Repositories on Ubuntu TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Awe inspiring, inter-galactic theme (Win 7) Case Study – How to Optimize Popular Wordpress Sites Restore Hidden Updates in Windows 7 & Vista Iceland an Insurance Job? Find Downloads and Add-ins for Outlook Recycle !

    Read the article

  • CodePlex Daily Summary for Monday, December 27, 2010

    CodePlex Daily Summary for Monday, December 27, 2010Popular ReleasesRocket Framework (.Net 4.0): Rocket Framework for Windows V 1.0.0: Architecture is reviewed and adjusted in a way so that I can introduce the Web version and WPF version of this framework next. - Rocket.Core is introduced - Controller button functions revisited and updated - DB is renewed to suite the implemented features - Create New button functionality is changed - Add Question Handling featuresVCC: Latest build, v2.1.31226.0: Automatic drop of latest buildFxCop Integrator for Visual Studio 2010: FxCop Integrtor 1.1.0: New FeatureSearch violation information FxCop Integrator provides the violation search feature. You can find out specific violation information by simple search expression.Analyze with FxCop project file FxCop Integrator supports code analysis with FxCop project file. You can customize code analysis behavior (e.g. analyze specifid types only, use specific rules only, and so on). ImprovementImproved the code analysis result list to show more information (added Proejct and File column). Change...Flickr Wallpaper Rotator (for Windows desktop): Wallpaper Flickr 1.1: Some minor bugfixes (mostly covering when network connection is flakey, so I discovered them all while at my parents' house for Christmas).Mcopy API: McopyAPI v.1.0.0.2: changed display help "mcopyapi /?" and a few minor changedOPSM: OPSM v2.0: Updated version, 30%-40% faster than v1.0. Requires .NET Framework 2.0People's Note: People's Note 0.19: Added touch scrolling to the note view screen. To install: copy the appropriate CAB file onto your WM device and run it.HSS Core Framework: HSS Core v4.0.700.10: Release v4.0.700.10 December 25th, 2010 Upgrade Instructions from v4.0.700 to v4.0.700.10: (patch release) Uninstall v4.0.700 Install the new v4.0.700.10 Upgrade Instructions: (full upgrade from a version prior to v4.0.700) Uninstall your old version Update the Log Configuration, by changing the logging from Database to Machine Backup and then Truncate the hss logging tables Uninstall the HSSLOG Database using the HSSLOG Database install wizard Uninstall the HSS Core Framework Ins...NoSimplerAccounting: NoSimplerAccounting 6.0: -Fixed a bug in expense category report.NHibernate Mapping Generator: NHibernate Mapping Generator 2.0: Added support for Postgres (Thanks to Angelo)NewLife XCode: XCode v6.5.2010.1223 ????(????v3.5??): XCode v6.5.2010.1223 ????,??: NewLife.Core ??? NewLife.Net ??? XControl ??? XTemplate ????,??C#?????? XAgent ???? NewLife.CommonEnitty ??????(???,XCode??????) XCode?? ?????????,??????????????????,?????95% XCode v3.5.2009.0714 ??,?v3.5?v6.0???????????????,?????????。v3.5???????????,??????????????。 XCoder ??XTemplate?????????,????????XCode??? XCoder_Src ???????(????XTemplate????),??????????????????MiniTwitter: 1.64: MiniTwitter 1.64 ???? ?? 1.63 ??? URL ??????????????VivoSocial: VivoSocial 7.4.0: Please see changes: http://support.vivoware.com/project/ChangeLog.aspx?PROJID=48Umbraco CMS: Umbraco 4.6 Beta - codename JUNO: The Umbraco 4.6 beta (codename JUNO) release contains many new features focusing on an improved installation experience, a number of robust developer features, and contains more than 89 bug fixes since the 4.5.2 release. Improved installer experience Updated Starter Kits (Simple, Blog, Personal, Business) Beautiful, free, customizable skins included Skinning engine and Skin customization (see Skinning Documentation Kit) Default dashboards on install with hide option Updated Login t...SSH.NET Library: 2010.12.23: This release includes some bug fixes and few new fetures. Fixes Allow to retrieve big directory structures ssh-dss algorithm is fixed Populate sftp file attributes New Features Support for passhrase when private key is used Support added for diffie-hellman-group14-sha1,diffie-hellman-group-exchange-sha256 and diffie-hellman-group-exchange-sha1 key exchange algorithms Allow to provide multiple key files for authentication Add support for "keyboard-interactive" authentication method...ASP.NET MVC SiteMap provider: MvcSiteMapProvider 2.3.0: Using NuGet?MvcSiteMapProvider is also listed in the NuGet feed. Learn more... Like the project? Consider a donation!Donate via PayPal via PayPal. Release notesThis will be the last release targeting ASP.NET MVC 2 and .NET 3.5. MvcSiteMapProvider 3.0.0 will be targeting ASP.NET MVC 3 and .NET 4 Web.config setting skipAssemblyScanOn has been deprecated in favor of excludeAssembliesForScan and includeAssembliesForScan ISiteMapNodeUrlResolver is now completely responsible for generating th...Media Companion: Media Companion 3.400: Extract the entire archive to a folder which has user access rights, eg desktop, documents etc. A manual is included to get you startedMulticore Task Framework: MTF 1.0.1: Release 1.0.1 of Multicore Task Framework.SQL Monitor - tracking sql server activities: SQL Monitor 3.0 alpha 7: 1. added script save/load in user query window 2. fixed problem with connection dialog when choosing windows auth but still ask for user name 3. auto open user table when double click one table node 4. improved alert message, added log only methodEnhSim: EnhSim 2.2.6 ALPHA: 2.2.6 ALPHAThis release supports WoW patch 4.03a at level 85 To use this release, you must have the Microsoft Visual C++ 2010 Redistributable Package installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=A7B7A05E-6DE6-4D3A-A423-37BF0912DB84 To use the GUI you must have the .NET 4.0 Framework installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=9cfb2d51-5ff4-4491-b0e5-b386f32c0992 - Fixing up some r...New ProjectsActiveDirectory Object Model Library: The ActiveDirectory Object Model Library, which can operate the AD easily.Allspark: Allspark is an BI focused sharing space.Calendar Control for WP7: Calendar Control for Wp7 (Windows Phone 7). I needed a calendar control for my WP7 app and since WP7 did not have any and I couldn't find anything on the internet I decided to write my own. Please feel free to use it in your project and share if you have improved on it.CryptoPad: CryptoPad is a simple notepad like application that works with encrypted files. Users can open,edit and save encrypted files using CrypoPad without andy other application, everythning is easy and transparent.Entity Visualizer: Entity Framework Debugger VisualizerHTML-IDEx: HTML-IDEx is meant to be an open-source lightweight WYSIWYG HTML editor in which the user can see what they are doing in realtime. Comparable to my other project, Brandons HTML IDE, I'm hoping this to be a huge success.IL Inject: Aspect-oriented programming based on the injection of IL instruction in the methods of an assembly that is marked by attributesIntegração no Trabalho: Este projeto será desenvolvido para ser possível a integração entre funcionarios de uma empresa. O programa funcionará em rede e através dele será possível cadastrar projetos, atividades e seus colegas poderão comentar, criticar e dar dicas nos outros projetos .Knexsys Project: Knexsys, also know as KKD (Knexsys Knowledge Discovery), is a research program that aims to study the capabilities of SQL Server and the .NET framework to implement a rule production engine to mine real-time data. It's developed in C#.mysvn: This project host including some of my own projects. I am interested in WPF and RIA. Furthermore, I want to learn more about C, C++, Java, PHP, Python.OpenTwitter: Twitter clone made with C# and LINQ. this is only a webservice, there is no client for it, the main idea behind opentwitter is to provide a framework that you can use with your own clients ( mobile devices, web pages, etc ) and data provider ( xml, sql server, oracle, etc ).OPSM: OPSM Miner & information projectOutlook UI Tools: Changes to the Outlook UI to make it more usable: * Allow reply to address a recipient instead of the sender * Keep meeting reminders from popping up when overdue many daysSimpleUploadTo: Simple UploadToTFS 4 FPSE: Allow the ability for FrontPage Server Extensions to use TFS as a source control repository.TFS CheckInNotifier: Team Foundation Server 2010 Check-in event notifier desktop application.Universe.WCF.Behaviors: Universe.WCF.Behaviors provides behaviors: - Easy migration from Remoting - Transparent delivery - Traffic Statistics - WCF Streaming Adaptor for BinaryWriter and TextWriter - etc vebshop2: vebshop2Windows Weibo all in one for Sina Sohu and QQ: Windows Weibo all in one for Sina Sohu and QQ.

    Read the article

  • CodePlex Daily Summary for Friday, February 25, 2011

    CodePlex Daily Summary for Friday, February 25, 2011Popular ReleasesMono.Addins: Mono.Addins 0.6: The 0.6 release of Mono.Addins includes many improvements, bug fixes and new features: Add-in engine Add-in name and description can now be localized. There are new custom attributes for defining them, and can also be specified as xml elements in an add-in manifest instead of attributes. Support for custom add-in properties. It is now possible to specify arbitrary properties in add-ins, which can be queried at install time (using the Mono.Addins.Setup API) or at run-time. Custom extensio...patterns & practices: Project Silk: Project Silk Community Drop 3 - 25 Feb 2011: IntroductionWelcome to the third community drop of Project Silk. For this drop we are requesting feedback on overall application architecture, code review of the JavaScript Conductor and Widgets, and general direction of the application. Project Silk provides guidance and sample implementations that describe and illustrate recommended practices for building modern web applications using technologies such as HTML5, jQuery, CSS3 and Internet Explorer 9. This guidance is intended for experien...PhoneyTools: Initial Release (0.1): This is the 0.1 version for preview of the features.Minemapper: Minemapper v0.1.5: Now supports new Minecraft beta v1.3 map format, thanks to updated mcmap. Disabled biomes, until Minecraft Biome Extractor supports new format.Smartkernel: Smartkernel: ????,??????Document.Editor: 2011.7: Whats new for Document.Editor 2011.7: New Find dialog Improved Email dialog Improved Home tab Improved Format tab Minor Bug Fix's, improvements and speed upsChiave File Encryption: Chiave 0.9.1: Application for file encryption and decryption using 512 Bit rijndael encyrption algorithm with simple to use UI. Its written in C# and compiled in .Net version 3.5. It incorporates features of Windows 7 like Jumplists, Taskbar progress and Aero Glass. Change Log from 0.9 Beta to 0.9.1: ======================= >Added option for system shutdown, sleep, hibernate after operation completed. >Minor Changes to the UI. >Numerous Bug fixes. Feedbacks are Welcome!....Coding4Fun Tools: Coding4Fun.Phone.Toolkit v1.2: New control, Toast Prompt! Removed progress bar since Silverlight Toolkit Feb 2010 has it.Umbraco CMS: Umbraco 4.7: Service release fixing 31 issues. A full changelog will be available with the final stable release of 4.7 Important when upgradingUpgrade as if it was a patch release (update /bin, /umbraco and /umbraco_client). For general upgrade information follow the guide found at http://our.umbraco.org/wiki/install-and-setup/upgrading-an-umbraco-installation 4.7 requires the .NET 4.0 framework Web.Config changes Update the web web.config to include the 4 changes found in (they're clearly marked in...HubbleDotNet - Open source full-text search engine: V1.1.0.0: Add Sqlite3 DBAdapter Add App Report when Query Cache is Collecting. Improve the performance of index through Synchronize. Add top 0 feature so that we can only get count of the result. Improve the score calculating algorithm of match. Let the score of the record that match all items large then others. Add MySql DBAdapter Improve performance for multi-fields sort . Using hash table to access the Payload data. The version before used bin search. Using heap sort instead of qui...Silverlight????[???]: silverlight????[???]2.0: ???????,?????,????????silverlight??????。DBSourceTools: DBSourceTools_1.3.0.0: Release 1.3.0.0 Changed editors from FireEdit to ICSharpCode.TextEditor. Complete re-vamp of Intellisense ( further testing needed). Hightlight Field and Table Names in sql scripts. Added field dropdown on all tables and views in DBExplorer. Added data option for viewing data in Tables. Fixed comment / uncomment bug as reported by tareq. Included Synonyms in scripting engine ( nickt_ch ).IronPython: 2.7 Release Candidate 1: We are pleased to announce the first Release Candidate for IronPython 2.7. This release contains over two dozen bugs fixed in preparation for 2.7 Final. See the release notes for 60193 for details and what has already been fixed in the earlier 2.7 prereleases. - IronPython TeamCaliburn Micro: A Micro-Framework for WPF, Silverlight and WP7: Caliburn.Micro 1.0 RC: This is the official Release Candicate for Caliburn.Micro 1.0. The download contains the binaries, samples and VS templates. VS Templates The templates included are designed for situations where the Caliburn.Micro source needs to be embedded within a single project solution. This was targeted at government and other organizations that expressed specific requirements around using an open source project like this. NuGet This release does not have a corresponding NuGet package. The NuGet pack...Caliburn: A Client Framework for WPF and Silverlight: Caliburn 2.0 RC: This is the official Release Candidate for Caliburn 2.0. It contains all binaries, samples and generated code docs.Rawr: Rawr 4.0.20 Beta: Rawr is now web-based. The link to use Rawr4 is: http://elitistjerks.com/rawr.phpThis is the Cataclysm Beta Release. More details can be found at the following link http://rawr.codeplex.com/Thread/View.aspx?ThreadId=237262 As of the 4.0.16 release, you can now also begin using the new Downloadable WPF version of Rawr!This is a pre-alpha release of the WPF version, there are likely to be a lot of issues. If you have a problem, please follow the Posting Guidelines and put it into the Issue Trac...Azure Storage Samples: Version 1.0 (February 2011): These downloads contain source code. Each is a complete sample that fully exercises Windows Azure Storage across blobs, queues, and tables. The difference between the downloads is implementation approach. Storage DotNet CS.zip is a .NET StorageClient library implementation in the C# language. This library come with the Windows Azure SDK. Contains helper classes for accessing blobs, queues, and tables. Storage REST CS.zip is a REST implementation in the C# language. The code to implement R...PowerGUI Visual Studio Extension: PowerGUI VSX 1.3.2: New FeaturesPowerGUI Console Tool Window PowerShell Project Type PowerGUI 2.4 SupportMiniTwitter: 1.66: MiniTwitter 1.66 ???? ?? ?????????? 2 ??????????????????? User Streams ?????????Windows Phone 7 Isolated Storage Explorer: WP7 Isolated Storage Explorer v1.0 Beta: Current release features:WPF desktop explorer client Visual Studio integrated tool window explorer client (Visual Studio 2010 Professional and above) Supported operations: Refresh (isolated storage information), Add Folder, Add Existing Item, Download File, Delete Folder, Delete File Explorer supports operations running on multiple remote applications at the same time Explorer detects application disconnect (1-2 second delay) Explorer confirms operation completed status Explorer d...New ProjectsAgriscope: This is an open information visualization tool used to assist RADA and other Agriculture officers in retrieving and analyzing data in day to day tasks.AVCampos NF-e: Realizar a emissão e controle de nf-e, através de ambientes moveis.Babel Obfuscator NAnt Tasks: This is an NAnt task for Babel Obfuscator. Babel Obfuscator protect software components realized with Microsoft .NET Framework in order to make reverse engineering difficult. Babel Obfuscator can be downloaded at http://www.babelfor.netConcurrent Programming Library: Concurrent Programming Library provides an opportunity to develop a parallel programs using .net framework 2.0 and above. It includes an implementation of various parallel algorithms, thread-safe collections and patterns.EOrg: Gelistirme maksatli yaptigim çalismalar.Extend Grid View: Extend grid view is user control. It help paging a dataset is set on gridview.FinlogiK ReSharper Contrib: FinlogiK ReSharper Contrib is a plugin for ReSharper 5.1 which adds code cleanup and inspection options for static qualifiers.Game development with Playstation Move and Ogre3D: This project is a research aiming to develop a program which can handle the Playstation Move on PC. After that, we will implement a game based on it. The programming language is C++. The graphics is handled by Ogre3D.JAD: Projeto de software.JSARP: This tool allows describing and verifying Petri Nets with the support of a graphical interface. This tool, is being developed in Java.KangmoDB - A replacement for the storage engine of SQLite: KangmoDB claims to be a real-time storage engine that replaces the one in SQLite. KangmoDB tries to achieve the lowest latency time for a transaction with ACID properties. It will be mainly used for the stock market that requires lowest latency with highest stability. MetaprogrammingInDotNetBook: This project will contain code and other artifacts related to the "Metaprogramming in .NET" book that should be avaible in October 2011.munix workstation: The µnix project is an endeavour to create a complete workstation and UNIX-like OS using standard logic IC's and 8-bit AVR microcontrollers. The goal isn't to make something that will compete with a traditional workstation in computation but instead to have a great DIY project.PhoneyTools: Set of controls and utilities for WP7 development.Plist Builder: Serialize non-circular-referencing .NET objects to plist in .NET.Quake3.NET: A port of the Quake 3 engine to C#. This is not merely a port of Quake 3 to run in a managed environment, but a complete rewrite of the engine using C# 4.0's powerful language features.SecViz: Web server security attack graph alert correlation IDS SerialNome: This is a multiport serial applicationsprout sms: a wp7 cabbage clientUsing external assembly in Biztalk 2009 map: Using external assembly in Biztalk 2009 map.

    Read the article

  • CodePlex Daily Summary for Saturday, June 25, 2011

    CodePlex Daily Summary for Saturday, June 25, 2011Popular ReleasesMosaic Project: Mosaic Alpha build 252: First public release There are 8 widgets: - Desktop - Gmail - Weather - Control panel - Me - Video - Clock - PicturesUsage Agent: Usage Agent 9.0.8: Latest release. Changes include: - Fixes for Optus - Usage Delta statistic for BigPond - Eliminated the need for UAC prompt at every startupjQuery List DragSort: jQuery List DragSort 0.4.3: Fix item not dropping correctly on Chrome and jQuery 1.6KinectNUI: Jun 25 Alpha Release: Initial public version. No installer needed, just run the EXE.TerrariViewer: TerrariViewer v3.3 [v1.0.5 Compatible]: I have added support for all the new items in Terraria v1.0.5. I have also added the ability to put your character in hardcore mode or take them out via a simple checkbox on the stats tab. If you come across any bugs, please let me know immediately.Terraria World Viewer: Version 1.5: Update June 24th Made compatible with the new tiles found in Terraria 1.0.5Kinect Earth Move: KinectEarthMove sample code: Sample code releasedThis is a sample code for Kinect for Windows SDK beta, which was demonstrated on Channel 9 Kinect for Windows SKD beta launch event on June 17 2011. Using color image and skeleton data from Kinect and user in front of Kinect can manipulate the earth between his/her hands.NetOffice - The easiest way to use Office in .NET: NetOffice Release 0.9b: Changes: - fix critical issue 262334 (AccessViolationException while using events in a COMAddin) - remove x64 Assemblies (not necessary) Includes: - Runtime Binaries and Source Code for .NET Framework:......v2.0, v3.0, v3.5, v4.0 - Tutorials in C# and VB.Net:..............................................................COM Proxy Management, Events, etc. - Examples in C# and VB.Net:............................................................Excel, Word, Outlook, PowerPoint, Access - COMAddi...MiniTwitter: 1.70: MiniTwitter 1.70 ???? ?? ????? xAuth ?? OAuth ??????? 1.70 ??????????????????????????。 ???????????????? Twitter ? Web ??????????、PIN ????????????????????。??????????????????、???????????????????????????。Total Commander SkyDrive File System Plugin (.wfx): Total Commander SkyDrive File System Plugin 0.8.7b: Total Commander SkyDrive File System Plugin version 0.8.7b. Bug fixes: - BROKEN PLUGIN by upgrading SkyDriveServiceClient version 2.0.1b. Please do not forget to express your opinion of the plugin by rating it! Donate (EUR)SkyDrive .Net API Client: SkyDrive .Net API Client 2.0.1b (RELOADED): SkyDrive .Net API Client assembly has been RELOADED in version 2.0.1b as a REAL API. It supports the followings: - Creating root and sub folders - Uploading and downloading files - Renaming and deleting folders and files Bug fixes: - BROKEN API (issue 6834) Please do not forget to express your opinion of the assembly by rating it! Donate (EUR)Mini SQL Query: Mini SQL Query v1.0.0.59794: This release includes the following enhancements: Added a Most Recently Used file list Added Row counts to the query (per tab) and table view windows Added the Command Timeout option, only valid for MSSQL for now - see options If you have no idea what this thing is make sure you check out http://pksoftware.net/MiniSqlQuery/Help/MiniSqlQueryQuickStart.docx for an introduction. PK :-]HydroDesktop - CUAHSI Hydrologic Information System Desktop Application: 1.2.591 Beta Release: 1.2.591 Beta Releasepatterns & practices: Project Silk: Project Silk Community Drop 12 - June 22, 2011: Changes from previous drop: Minor code changes. New "Introduction" chapter. New "Modularity" chapter. Updated "Architecture" chapter. Updated "Server-Side Implementation" chapter. Updated "Client Data Management and Caching" chapter. Guidance Chapters Ready for Review The Word documents for the chapters are included with the source code in addition to the CHM to help you provide feedback. The PDF is provided as a separate download for your convenience. Installation Overview To ins...SQL Server HowTo: Version 1.0: Initial ReleaseDropBox Linker: DropBox Linker 1.3: Added "Get links..." dialog, that provides selective public files links copying Get links link added to tray menu as the default option Fixed URL encoding .NET Framework 4.0 Client Profile requiredDotNetNuke® Community Edition: 06.00.00 Beta: Beta 1 (Build 2300) includes many important enhancements to the user experience. The control panel has been updated for easier access to the most important features and additional forms have been adapted to the new pattern. This release also includes many bug fixes that make it more stable than previous CTP releases. Beta ForumsBlogEngine.NET: BlogEngine.NET 2.5 RC: BlogEngine.NET Hosting - Click Here! 3 Months FREE – BlogEngine.NET Hosting – Click Here! This is a Release Candidate version for BlogEngine.NET 2.5. The most current, stable version of BlogEngine.NET is version 2.0. Find out more about the BlogEngine.NET 2.5 RC here. If you want to extend or modify BlogEngine.NET, you should download the source code. To get started, be sure to check out our installation documentation. If you are upgrading from a previous version, please take a look at ...Microsoft All-In-One Code Framework - a centralized code sample library: All-In-One Code Framework 2011-06-19: Alternatively, you can install Sample Browser or Sample Browser VS extension, and download the code samples from Sample Browser. Improved and Newly Added Examples:For an up-to-date code sample index, please refer to All-In-One Code Framework Sample Catalog. NEW Samples for Windows Azure Sample Description Owner CSAzureStartupTask The sample demonstrates using the startup tasks to install the prerequisites or to modify configuration settings for your environment in Windows Azure Rafe Wu ...IronPython: 2.7.1 Beta 1: This is the first beta release of IronPython 2.7. Like IronPython 54498, this release requires .NET 4 or Silverlight 4. This release will replace any existing IronPython installation. The highlights of this release are: Updated the standard library to match CPython 2.7.2. Add the ast, csv, and unicodedata modules. Fixed several bugs. IronPython Tools for Visual Studio are disabled by default. See http://pytools.codeplex.com for the next generation of Python Visual Studio support. See...New Projects.Net Image Processor: An image processing wrapper around GDI+, allowing you to apply one or more filters against an image source. Out-of-the-box support: * Conversion from one image type to another * Image resizing and various strategies for resolving aspect ratio * Edge detection * GIF support * Chaining filters together to perform complex operations on a single image Filters can be stacked and queued so that they run one after the other in a process queue. The processor can accept filenames, streams o...AsyncGetListSample: Reactive Extensions?????、Twitter??????????????????????????????。Awful for Windows Phone 7: Awful for Windows Phone 7 is a work-in-progress forum reader software for the Something Awful Forums.binzlog2.com: BlogEngine sourceCaffeine Model: A view model framework that specifically targets problems such as change recognition, validation and graph traversal. Provides robust support in these areas and base classes from which to build off of.CxBuild: cxbuildDotNetNuke Scheduler DashboardControl: The DNNSchedulerDashboard control adds a new control to the DotNetNuke Dashboard module that monitors the execution of the tasks in the DNN Scheduler. This control will keep host administrators informed on the tasks that are not executing on time.fkanban: A free Agile tool insist of Product backlog,sprint,Kanban etcKillstone Spycam: A "WebCam Timershot" style application that can take photos from a DirectShow device at a specified interval and save to disk and/or upload via FTP.Live Services for Moodle 1.9: This is a modification to the original Microsoft Live Services for Moodle allowing users to chat through Live Messenger using the web client.MoreEPG: Import of Extern EPG in Windows Media Center (Windows 7)NAntExt: The NAntExt is an extensions library for NAnt. This library includes Tasks and Functions which are much needed in using NAnt, but are not included in NAnt or NAntContrib. The ideal would be to eventually cycle them back into one of these projects. NetSquare - FourSquare C#.NET Open Source Class Library: NetSquare makes it easy to access Foursquare via the new v2 OAuth interface. This will be published as a VS 2010 C# project with associated examples.Power Presenter 2011: Do you want to make a great photo slideshow? Then get Power Presenter the best for showing phothos. Music with a click from the menu of the window. Better for you!!! If you want to join us it is a single rule NO-SEELING & NO-MONEY. It is developed in VB.NET. PowerPackPS: PowerPackPS is a DSV for creating PowerGUI PowerPacks using Powershell instead of the GUI or XML.Resuming Action Results for ASP.NET MVC: Resuming Action Results for MVC provides a similar implementation as the standard FileResult ActionResult objects but with the intelligence to detect range requests and respond appropriately with no need to write a single extra line of code.SoundSwitch: SoundSwitch makes it easier to switch playback devices (sound cards). Normally, to switch a Playback device you need to right click the sound icon in the bottom right corner of your screen (system tray), choose "Playback devices" and then change the default playback device. Every time you want to switch. With SoundSwitch you just configure once between which Playback devices you want to toggle and then you can press Ctrl+Alt+F11 to toggle automatically!StopWatch Plus: This is a simple stopwatch with which you can set a countdown, save and control the various steps imposed by the pause button. The projects will is still under development and not yet possess all the qualities mentioned above, currently is a simple countdown. _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ Questo è un semplice cronometro col quale si potrà impostare un conto alla rovescia, salvare e tenere sotto controllo i vari step ...TFS Reports: The TFS Reports project is about sharing knowledge around the reporting capabilities in TFS and contains both guidance as well as ready to use reports. TRK ATR: Website for TV/Radio channel UpdateTool: A tool used to update client This project is for personal use. Please do not download in now.Windows Service Helper: Helps by creating a Play/Stop/Pause UI when running with a debugger attached, but also allows the windows service to be installed and run by the Windows Services environment as well. All this with one line of code!XNB filetype plugin for Paint.NET: This plugin allows viewing and editing of XNA compiled textures from inside Paint.NET.

    Read the article

  • A DirectoryCatalog class for Silverlight MEF (Managed Extensibility Framework)

    - by Dixin
    In the MEF (Managed Extension Framework) for .NET, there are useful ComposablePartCatalog implementations in System.ComponentModel.Composition.dll, like: System.ComponentModel.Composition.Hosting.AggregateCatalog System.ComponentModel.Composition.Hosting.AssemblyCatalog System.ComponentModel.Composition.Hosting.DirectoryCatalog System.ComponentModel.Composition.Hosting.TypeCatalog While in Silverlight, there is a extra System.ComponentModel.Composition.Hosting.DeploymentCatalog. As a wrapper of AssemblyCatalog, it can load all assemblies in a XAP file in the web server side. Unfortunately, in silverlight there is no DirectoryCatalog to load a folder. Background There are scenarios that Silverlight application may need to load all XAP files in a folder in the web server side, for example: If the Silverlight application is extensible and supports plug-ins, there would be a /ClinetBin/Plugins/ folder in the web server, and each pluin would be an individual XAP file in the folder. In this scenario, after the application is loaded and started up, it would like to load all XAP files in /ClinetBin/Plugins/ folder. If the aplication supports themes, there would be a /ClinetBin/Themes/ folder, and each theme would be an individual XAP file too. The application would qalso need to load all XAP files in /ClinetBin/Themes/. It is useful if we have a DirectoryCatalog: DirectoryCatalog catalog = new DirectoryCatalog("/Plugins"); catalog.DownloadCompleted += (sender, e) => { }; catalog.DownloadAsync(); Obviously, the implementation of DirectoryCatalog is easy. It is just a collection of DeploymentCatalog class. Retrieve file list from a directory Of course, to retrieve file list from a web folder, the folder’s “Directory Browsing” feature must be enabled: So when the folder is requested, it responses a list of its files and folders: This is nothing but a simple HTML page: <html> <head> <title>localhost - /Folder/</title> </head> <body> <h1>localhost - /Folder/</h1> <hr> <pre> <a href="/">[To Parent Directory]</a><br> <br> 1/3/2011 7:22 PM 185 <a href="/Folder/File.txt">File.txt</a><br> 1/3/2011 7:22 PM &lt;dir&gt; <a href="/Folder/Folder/">Folder</a><br> </pre> <hr> </body> </html> For the ASP.NET Deployment Server of Visual Studio, directory browsing is enabled by default: The HTML <Body> is almost the same: <body bgcolor="white"> <h2><i>Directory Listing -- /ClientBin/</i></h2> <hr width="100%" size="1" color="silver"> <pre> <a href="/">[To Parent Directory]</a> Thursday, January 27, 2011 11:51 PM 282,538 <a href="Test.xap">Test.xap</a> Tuesday, January 04, 2011 02:06 AM &lt;dir&gt; <a href="TestFolder/">TestFolder</a> </pre> <hr width="100%" size="1" color="silver"> <b>Version Information:</b>&nbsp;ASP.NET Development Server 10.0.0.0 </body> The only difference is, IIS’s links start with slash, but here the links do not. Here one way to get the file list is read the href attributes of the links: [Pure] private IEnumerable<Uri> GetFilesFromDirectory(string html) { Contract.Requires(html != null); Contract.Ensures(Contract.Result<IEnumerable<Uri>>() != null); return new Regex( "<a href=\"(?<uriRelative>[^\"]*)\">[^<]*</a>", RegexOptions.IgnoreCase | RegexOptions.CultureInvariant) .Matches(html) .OfType<Match>() .Where(match => match.Success) .Select(match => match.Groups["uriRelative"].Value) .Where(uriRelative => uriRelative.EndsWith(".xap", StringComparison.Ordinal)) .Select(uriRelative => { Uri baseUri = this.Uri.IsAbsoluteUri ? this.Uri : new Uri(Application.Current.Host.Source, this.Uri); uriRelative = uriRelative.StartsWith("/", StringComparison.Ordinal) ? uriRelative : (baseUri.LocalPath.EndsWith("/", StringComparison.Ordinal) ? baseUri.LocalPath + uriRelative : baseUri.LocalPath + "/" + uriRelative); return new Uri(baseUri, uriRelative); }); } Please notice the folders’ links end with a slash. They are filtered by the second Where() query. The above method can find files’ URIs from the specified IIS folder, or ASP.NET Deployment Server folder while debugging. To support other formats of file list, a constructor is needed to pass into a customized method: /// <summary> /// Initializes a new instance of the <see cref="T:System.ComponentModel.Composition.Hosting.DirectoryCatalog" /> class with <see cref="T:System.ComponentModel.Composition.Primitives.ComposablePartDefinition" /> objects based on all the XAP files in the specified directory URI. /// </summary> /// <param name="uri"> /// URI to the directory to scan for XAPs to add to the catalog. /// The URI must be absolute, or relative to <see cref="P:System.Windows.Interop.SilverlightHost.Source" />. /// </param> /// <param name="getFilesFromDirectory"> /// The method to find files' URIs in the specified directory. /// </param> public DirectoryCatalog(Uri uri, Func<string, IEnumerable<Uri>> getFilesFromDirectory) { Contract.Requires(uri != null); this._uri = uri; this._getFilesFromDirectory = getFilesFromDirectory ?? this.GetFilesFromDirectory; this._webClient = new Lazy<WebClient>(() => new WebClient()); // Initializes other members. } When the getFilesFromDirectory parameter is null, the above GetFilesFromDirectory() method will be used as default. Download the directory’s XAP file list Now a public method can be created to start the downloading: /// <summary> /// Begins downloading the XAP files in the directory. /// </summary> public void DownloadAsync() { this.ThrowIfDisposed(); if (Interlocked.CompareExchange(ref this._state, State.DownloadStarted, State.Created) == 0) { this._webClient.Value.OpenReadCompleted += this.HandleOpenReadCompleted; this._webClient.Value.OpenReadAsync(this.Uri, this); } else { this.MutateStateOrThrow(State.DownloadCompleted, State.Initialized); this.OnDownloadCompleted(new AsyncCompletedEventArgs(null, false, this)); } } Here the HandleOpenReadCompleted() method is invoked when the file list HTML is downloaded. Download all XAP files After retrieving all files’ URIs, the next thing becomes even easier. HandleOpenReadCompleted() just uses built in DeploymentCatalog to download the XAPs, and aggregate them into one AggregateCatalog: private void HandleOpenReadCompleted(object sender, OpenReadCompletedEventArgs e) { Exception error = e.Error; bool cancelled = e.Cancelled; if (Interlocked.CompareExchange(ref this._state, State.DownloadCompleted, State.DownloadStarted) != State.DownloadStarted) { cancelled = true; } if (error == null && !cancelled) { try { using (StreamReader reader = new StreamReader(e.Result)) { string html = reader.ReadToEnd(); IEnumerable<Uri> uris = this._getFilesFromDirectory(html); Contract.Assume(uris != null); IEnumerable<DeploymentCatalog> deploymentCatalogs = uris.Select(uri => new DeploymentCatalog(uri)); deploymentCatalogs.ForEach( deploymentCatalog => { this._aggregateCatalog.Catalogs.Add(deploymentCatalog); deploymentCatalog.DownloadCompleted += this.HandleDownloadCompleted; }); deploymentCatalogs.ForEach(deploymentCatalog => deploymentCatalog.DownloadAsync()); } } catch (Exception exception) { error = new InvalidOperationException(Resources.InvalidOperationException_ErrorReadingDirectory, exception); } } // Exception handling. } In HandleDownloadCompleted(), if all XAPs are downloaded without exception, OnDownloadCompleted() callback method will be invoked. private void HandleDownloadCompleted(object sender, AsyncCompletedEventArgs e) { if (Interlocked.Increment(ref this._downloaded) == this._aggregateCatalog.Catalogs.Count) { this.OnDownloadCompleted(e); } } Exception handling Whether this DirectoryCatelog can work only if the directory browsing feature is enabled. It is important to inform caller when directory cannot be browsed for XAP downloading. private void HandleOpenReadCompleted(object sender, OpenReadCompletedEventArgs e) { Exception error = e.Error; bool cancelled = e.Cancelled; if (Interlocked.CompareExchange(ref this._state, State.DownloadCompleted, State.DownloadStarted) != State.DownloadStarted) { cancelled = true; } if (error == null && !cancelled) { try { // No exception thrown when browsing directory. Downloads the listed XAPs. } catch (Exception exception) { error = new InvalidOperationException(Resources.InvalidOperationException_ErrorReadingDirectory, exception); } } WebException webException = error as WebException; if (webException != null) { HttpWebResponse webResponse = webException.Response as HttpWebResponse; if (webResponse != null) { // Internally, WebClient uses WebRequest.Create() to create the WebRequest object. Here does the same thing. WebRequest request = WebRequest.Create(Application.Current.Host.Source); Contract.Assume(request != null); if (request.CreatorInstance == WebRequestCreator.ClientHttp && // Silverlight is in client HTTP handling, all HTTP status codes are supported. webResponse.StatusCode == HttpStatusCode.Forbidden) { // When directory browsing is disabled, the HTTP status code is 403 (forbidden). error = new InvalidOperationException( Resources.InvalidOperationException_ErrorListingDirectory_ClientHttp, webException); } else if (request.CreatorInstance == WebRequestCreator.BrowserHttp && // Silverlight is in browser HTTP handling, only 200 and 404 are supported. webResponse.StatusCode == HttpStatusCode.NotFound) { // When directory browsing is disabled, the HTTP status code is 404 (not found). error = new InvalidOperationException( Resources.InvalidOperationException_ErrorListingDirectory_BrowserHttp, webException); } } } this.OnDownloadCompleted(new AsyncCompletedEventArgs(error, cancelled, this)); } Please notice Silverlight 3+ application can work either in client HTTP handling, or browser HTTP handling. One difference is: In browser HTTP handling, only HTTP status code 200 (OK) and 404 (not OK, including 500, 403, etc.) are supported In client HTTP handling, all HTTP status code are supported So in above code, exceptions in 2 modes are handled differently. Conclusion Here is the whole DirectoryCatelog’s looking: Please click here to download the source code, a simple unit test is included. This is a rough implementation. And, for convenience, some design and coding are just following the built in AggregateCatalog class and Deployment class. Please feel free to modify the code, and please kindly tell me if any issue is found.

    Read the article

  • Surface RT: To Be Or Not To Be (Part 1)

    - by smehaffie
    So the Surface RT has been out for 9 months and Microsoft just declared a $900 million dollar write-down. So how did this happen and what does it mean for Microsoft’s efforts to break into the tablet market? I have been thinking a lot about most of the information below since the Surface product line was released. If you are looking for a “Microsoft Is Dead” story, then don’t read any further. But if you want an honest look at what I think led Microsoft to this point and what I think can be done to make Surface RT devices better, then please continue reading. What Led Microsoft To The $900 Million Write-Down Surface Unveiling:Microsoft totally missed the boat when they unveiled the Surface product line on June 18th, 2012. Microsoft should’ve been ready to post the specifications of both devices that night. Microsoft should’ve had a site up and running right after the event so people could pre-order the devices. This would have given them a good idea what the interest was in each device.  They could also have used this data to make a better estimate for the number of units to to have available for the launch and beyond.  They also lost out on taking advantage of the excitement generated by the Surface RT and Surface Pro announcement. They could have thrown in a free touch keyboard to anyone who pre-ordered. The advertising should have started right after the announcement and gotten bigger as launch day approached. Push for as many pre-order as possible and build excitement for the launch. Actual Launch (Surface RT): By this time all excitement was gone from the initial announcement, except for the Micorsoft faithful. Microsoft should have been ready to sell the Surface in as many markets as possible at launch. The limited market release was a real letdown for a lot of people.  A limited release right after the initial announce is understandable, but not at the official launch of the product. Microsoft overpriced the device and now they are lowering it to what it should have been to start with. The $349 price is within the range I suggested it should be at before pricing was announced. (Surface Tablets: The Price Must Be Right). Limited ordering options online was also a killer. User should have been able to buy the base unit of each device and then add on whatever keyboard they wanted to (this applies more to the Surface Pro).  There should have also been a place where users could order any additional add-ins that they wanted to buy (covers, extra power supplies, etc.) Marketing was better and the dancing “Click In” commercial was cool, but the ads comparing the iPad with Siri should have been on the air from day one of the announcement (or at least the launch).  Consumers want to know why you tablet is better, not just that is has a clickable keyboard and built-in kickstand. They could have also compared it to some of the other mid-range tablets if they had not overprices it to begin with. Stock Applications (Mail, People, Calendar, Music, Video, Reader and IE): This is where Microsoft really blew it. They had all the time in the world to make these applications the best of breed and instead we got applications that seemed thrown together.  Some updates have made these application better, but they are all still lacking in features that should have been there from day one. This did not help to enhance a new users experience any. ** I will admit that the applications that were data driven were first class citizen’s and that makes it even more perplexing why MS could knock it out of the park with the Weather, Travel, Finance, Bing, etc.) and fail so miserably on the core applications users would use the most on a tablet. Desktop on Tablet: The desktop just is so out of place on the tablet  I understand it was needed for Office but think it would have been better to not have the desktop in Windows RT, but instead open up the Office applications in full screen mode, in a desktop shell (same goes for  IE11).That way the user wouldn’t realize they are leaving Metro and going to the desktop. The other option would have been to just not include Office on Windows RT devices. Instead they could have made awesome Widows Store Apps for Word, Excel, OneNote and PowerPoint. In addition, they could have made the stock Mail, People, and Calendar applications contain all the functions that Outlook gives desktop users. Having some of the settings in desktop mode and others under “Change PC Settings” made Windows RT seemed unfinished and rushed to market. What Can Be Done To Make Windows RT Based Tablets Better (At least in my opinion) Either eliminate the desktop all together from Windows RT or at least make the user experience better by hiding the fact the user is running Office/IE in the desktop. Personally I ‘d like them to totally get rid of it and just make awesome Windows Store Application version of Word, Excel PowerPoint & OneNote.  This might also make the OS smaller and give the user more available disk space. I doubt there will ever be a Windows Store App versions of Office, but I still think it is a good idea. Make is so users can easily direct their documents, picture, videos and music to their extra storage and can access these files from the standard libraries.  A user should not have to create a VM on their microSD card or create symbolic links to get this to work properly. Most consumers would not be able to do this. Then users get frustrated when they run out or room on their main storage because nothing is automatically save to their microSD card when saved to libraries.  This is a major bug that needs to be fixed, otherwise Microsoft’s selling point of having a microSD slot is worthless. Allows users to uninstall and re-install any of the Office product that come with the Surface. That way people can free up storage space by uninstalling the Office applications they do not need. Everyone’s needs are different, so make the options flexible. Don’t take up storage space for applications the user will not use. Make the Core applications the “Cream of the Crop” Windows App Store applications. The should set the bar for all other Store applications. Improve performance as much as possible, if it seems to be sluggish on a tablet consumer will not buy it. They need to price the next line of Surface product very aggressive to undercut not only iPad but also Android low end tablets (Nook, Kindle Fire, and Nexus, etc.) Give developers incentives to write quality applications for the devices. Don’t reward developers for cranking out cookie cutter, low quality applications. I’d even suggest Microsoft consider implementing some new store certification guideline to stop these type of applications being published. Allow users to easily move the recover disk “partition between their microSD card and main storage. My Predictions for the Surface RT and Windows RT I honestly think even with all the missteps MS has made since the announcement  about the Surface product line, that they are on the right path. I was excited the Surface tablets when they were announced, and I still am. The truth be told, Windows 8 on a tablet (aka: Windows RT) is better than both iOS and Android. My nephew who is an Apple fan boy told me after he saw and used Windows 8 (he got the beta running on his iPad), that Windows 8 kicked Apples butt as a tablet OS. So there is hope for all Windows RT based tablets. I agree with my nephew and that is why whenever anyone asks me about my Surface, I love showing it off and recommend it. The 6 keys to gaining market share in the tablet market are; Aggressive pricing by both Microsoft and their OEM’s Good quality devices put out by Microsoft and their OEM’s (there are some out there, but not enough) Marketing, Marketing, Marketing from both Microsoft and their OEM’s (Need more ads showing why windows based tablets are better than iPads and Android tablets) Getting Widows tablets in retails stores all over, and giving sales people incentive to sell them. Consumers like to try electronics out before they buy them, and most will listen to what the sales person suggest. Microsoft needs sales people in retail stores directing people to buy windows based tablets over iPads and Android tablets. I think the Microsoft Stores within Best Buy is a good start, but they also need to get prominent displays in Walmart, Target, etc.. Release a smaller form factor Surface, Hopefully the 8”-10” next generation Surface is not a rumor. Make “Surface” the brand name for all Microsoft tablets and hybrid devices that they come out with. They cannot change the name with each new release.  Make Surface synonymous with quality, the same way that iPad  is for Apple. Well, that is my 2 cents on the subject. Let me know your thoughts by leaving a comment below. Soon to follow will be my thought on the Surface Pro, so keep an eye out for it. var addthis_pub="smehaffie"; var addthis_options="email, print, digg, slashdot, delicious, twitter, live, myspace, facebook, google, stumbleupon, newsvine";

    Read the article

  • CodePlex Daily Summary for Monday, June 07, 2010

    CodePlex Daily Summary for Monday, June 07, 2010New ProjectsAgile Personal Development Methodology: 本项目并不是软件开发项目,它是一个关注个人能力发展的项目,希望通过大家的积极参与和实践,在价值观、原则和最佳实践的基础上不断丰富和完善这些内容。我将主要从生活、工作和个人三个主要方面来指导个人如何快速地提高自己的能力。在工作方面,首先关注的是IT技术人员。 希望本方法论的不断完善,能够对不同阶...Altairis Mail Toolkit: Altairis Mail Toolkit is a component for .NET developers making easy to send templated and localized e-mail messages. Uses standard resource mechan...AmazonPriceTicker: AmazonPriceTicker ist ein kleines ASP.NET-Projekt für unser Studium.CC.Hearts Screen Saver: A complete screensaver that draws pretty hearts. Supports all standard screensaver functionality (preview window, options, multi-monitor). Written...Controle Financeiro com DDD: Projeto para fins de estudo das tencologias: - DDD - TDD - Asp Net MVCDebugWriterTextBox: This is modified TextBox which can catch up Debug.Write() and display log. Also it can write log data to file - all you need is to set up file name!DEIConsultingDev: DEI Consulting DEVEasy Augmented Reality Suite for Silverlight: Easy Augmented Reality Suite for SilverlightEvent Broker: Simple event broker with an hierarchical implementation.fleet It: A WPF Client for Team Space. Developed using WPF and C#. Various URL Shortening services integrated.Gest-Bus: Gest-BusHNV Project: Projects created by Hoàng, Ngọc, VũHotel Management System: Hotel Management System : concerned in making a complete website for a hotel every thing in hotel in just one web application : Finance , managemen...ISEN découverte majeure application mobile: ISEN découverte majeure application mobile contrôle d'un pc par un téléphone portable avec plateforme windows 7 LiveSequence: Based in the sequence diagramming control of Nauman Leghari.NHash: This is a simple project that integrates with Explorer and Computes MD5 and SHA1.NHibernate Sidekick Library: NHibernate Sidekick is a library intended to assist in the development of multi-tiered applications using the NHibernate ORM framework.ScrewTurn ASP.NET Proxy Membership Provider: Plugin for the ScrewTurn Wiki System to use Standard ASP.NET Membership and Role providers.Silverlight SNS: We are going to develop a SNS web application based on Silver lightSilverPoiMap: SilverPoiMap provides interactive searching and management of Points of Interest. It is a Facebook client application which allow you to connect to...Simple Resource Localization Editor: Simple editor that simplifies localization and synchronization of .NET resource files (.resx).SimpleBlog.NET MVC: A very simple blog engine developed in ASP.NET 3.5 MVC2 and C#.Siverlight Project: Hope that everybody continue to develop it.SpaceConquest: Incorporated standard design patterns to build a peer to peer game in Java. The game rules were similar in complexity to games like Civilization an...Yasts: Yasts - Yet Another Space Trading Sim - This is a learning environment project.New ReleasesAgile Personal Development Methodology: 敏捷个人-认识自我,管理自我.pdf: 去年我在blog上写了个人管理系列的一些blog,其中一些文章深受大家的喜欢。想到写这个系列是源于在实施敏捷Scrum方法时,对方法实施是否对人的水平需要高要求的一些思考。自组织团队是建立在敏捷个人之上的,没有个人就没有团队,实施Scrum对人要求不高,但想实施得好,那么对人的要求肯定不低。 ...Altairis Mail Toolkit: 1.0.0 RTM: Initial releaseAndrew's XNA Helpers: Andrew's Xna Helpers V1.1: Currently only supports X86 projects since portions of the code have to be reworked to work with the xbox. I do plan to code it for the 360 though....C#Mail: Higuchi.Mail.dll (2010.6.6 ver): Higuchi.Mail.dll (2010.4.30 ver)Community Forums NNTP bridge: Community Forums NNTP Bridge V31: Release of the Community Forums NNTP Bridge to access the social and anwsers MS forums with a single, open source NNTP bridge. This release has ad...Html Agility Pack: Experimental Xpath Updates: In efforts to update make Html Agility Packs Xpath support to be closer to the System.Xml.Xpath implementation I have updated HAP to have all nodes...imdb movie downloader: myImdb 0.9.2: myImdb 0.9.2 Fully changed...and added some more features.. working with XML movie list... Used Backgroundworker more clever results and guess m...InfoService: InfoService v1.6 - MPE1 or RAR Package: InfoService Release v1.6.0.136 Please read Plugin installation for installation instructions.ISEN découverte majeure application mobile: appli traitement d'image: but : capturer, redimensionner l'image de l'écran d'un pc.Jeremi Stadler: Clipboard Manager: Version 1.0.5.14 It's finally here! I have been working on this one the whole night but it's worth it ;) The program catches clipboard changes an...mesoBoard: mesoBoard 0.9 - Beta: mesoBoard version 0.9 beta Released under the New BSD License. http://mesoboard.codeplex.com/license http://mesoboard.comMiniTwitter: 1.13: MiniTwitter 1.13 変更内容 修正 ダイレクトメッセージの取得に失敗するバグを修正 タイムラインを編集すると落ちるバグを修正 リストのインポートで最初の 20 人しか取得できない問題を修正 追加 URL マウスオーバーでの画像のプレビュー機能を実装MiniTwitter: 1.13.1: MiniTwitter 1.13.1 更新内容 修正 タイムライン追加、編集ダイアログでキャンセルを選ぶと落ちるバグを修正MSTS Editors & Tools: Simis Editor v0.4: Simis Editor v0.4 Open and Save dialogs support full filename filters from BNFs (e.g. "tsection.dat"). Added statusbar and menu help text. Adde...NHibernate Sidekick Library: 0.6.0: v0.6.0 - Initial Release TODONLog - Advanced .NET Logging: Nightly Build 2010.06.06.001: Changes since the last build:2010-06-05 21:50:21 Jarek Kowalski fixed doc for ${document-uri} 2010-06-05 20:21:53 Jarek Kowalski removed Layout re...NQ - Component-oriented Framework: NQ Core 0.90: Main changes in 0.90 release: Introduction of an additional built-in component loader to load component and service information from XML files ins...PhluffyFotos: v4 Windows Azure: This release has been updated to Visual Studio 2010 as well as the latest StorageClient library. Make sure you run the Provision.cmd in order to b...RIA Services Essentials: Book Club Application (June 6, 2010): The initial release of the BookClub application based on the MIX presentation with a few changes: 1. Some bug fixes 2. Added the ability to Like a ...Samurai.Workflow: 1.1 Stable Release: Removed reference to WPF assemblies so non-WPF applications can use the workflow. For WPF apps, the workflow will use reflection to seek out UI thr...SilverPoiMap: SilverPoiMap Beta: Beta VersionSimple Resource Localization Editor: Release 1: First release.Siverlight Project: Auto Arrange Panel Project: Auto Arrange Panel ProjectSmart Voice: Smart Voice 0.2: Changelog: Corrected a few bugsSmart Voice: Smart Voice 0.2.1: Changelog: Fixed a major bug that was slowing the application Added opt in for usage data In order to contribute with user data, please change t...Spider Compiler: Release 0.1: Contains the setup for the spider compiler. This release includes the changeset #66980.Spider Compiler: Release 0.2: This release includes the changeset #67003.The Lounge Repository: Lounge Repo Binary Release: All in one binary download of the Lounge Repository. Improvements: -More tolerant towards schema changes -Bug fixed regarding array normalization ...UrzaGatherer: UrzaGatherer v2.0.1: This release integrate the support of the Full Database Backup.Web/Cloud Applications Development Framework | Visual WebGui: 6.4 beta 3: This is the last beta version before the official release of Visual WebGui, including support for Visual Studio 2010 and it is fully featured with ...WinGet: Alpha 2: This is the second release of WinGet (0.5.0.2). Is is alpha quality not suitable for use in a production environment and it has bugs (see Known Iss...WoW Character Viewer: WoW Viewer: Newly redesigned layout of the original WoW Character Viewer. Faster access, cleaner layout.Most Popular ProjectsCommunity Forums NNTP bridgeASP.NET MVC Time PlannerMoonyDesk (windows desktop widgets)NeatUploadOutSyncFileupload AJAXViperWorks IgnitionAgUnit - Silverlight unit testing with ReSharperSQL Nexus ToolSmith Async .NET Memcached ClientMost Active ProjectsCommunity Forums NNTP bridgepatterns & practices – Enterprise LibraryRawrGMap.NET - Great Maps for Windows Forms & PresentationStyleCopN2 CMSsmark C# LibraryFarseer Physics EngineIonics Isapi Rewrite FilterNB_Store - Free DotNetNuke Ecommerce Catalog Module

    Read the article

  • Weird CSS-behaviour [migrated]

    - by WMRKameleon
    <!DOCTYPE html> <html> <head> <title>PakHet</title> <link rel="stylesheet" type="text/css" href="css/basis.css" /> </head> <body> <div class="wrapper"> <div id='cssmenu'> <ul> <li class="active"><a href='index.html'><span>Start</span></a></li> <li><a href='pakhet.html'><span>Over PakHet</span></a></li> <li><a href='overons.html'><span>Over Ons</span></a></li> <li class='has-sub '><a href='#'><span>Uw pakket</span></a> <ul> <li><a href='aanmelden.php'><span>Aanmelden</span></a></li> <li><a href='traceren.php'><span>Traceren</span></a></li> </ul> </li> </ul> </div> <div class="header"> <h1>Hier komt de titel van de website</h1> </div> <div class="content"> <p>Dit is de tekst van de content. Dit is de indexpagina.</p> </div> </div> </body> </html> And this is the CSS: /* CSS RESET */ html, body, div, span, applet, object, iframe, h1, h2, h3, h4, h5, h6, p, blockquote, pre, a, abbr, acronym, address, big, cite, code, del, dfn, em, img, ins, kbd, q, s, samp, small, strike, strong, sub, sup, tt, var, b, u, i, center, dl, dt, dd, ol, ul, li, fieldset, form, label, legend, table, caption, tbody, tfoot, thead, tr, th, td, article, aside, canvas, details, embed, figure, figcaption, footer, header, hgroup, menu, nav, output, ruby, section, summary, time, mark, audio, video, *{ margin: 0; padding: 0; border: 0; vertical-align: baseline; } table { border-collapse: collapse; border-spacing: 0; } /* Einde CSS RESET, nu echte code */ html, body{ background:url(../images/bg_picture.jpg) fixed no-repeat; } .wrapper{ margin:0 auto; } .header{ margin:0 auto; background-color:rgba(0, 0, 0, 0.4); } .content{ background-color:rgba(0, 0, 0, 0.4); width:600px; margin:0 auto; margin-top:50px; } .content p{ color:white; text-shadow:1px 1px 0 rgba(0,0,0, 0.5); font-family:"Lucida Grande", sans-serif; } #cssmenu{ height:37px; display:block; padding:0; margin: 0; border:1px solid; } #cssmenu > ul {list-style:inside none; padding:0; margin:0;} #cssmenu > ul > li {list-style:inside none; padding:0; margin:0; float:left; display:block; position:relative;} #cssmenu > ul > li > a{ outline:none; display:block; position:relative; padding:12px 20px; font:bold 13px/100% "Lucida Grande", Helvetica, sans-serif; text-align:center; text-decoration:none; text-shadow:1px 1px 0 rgba(0,0,0, 0.4); } #cssmenu > ul > li:first-child > a{border-radius:5px 0 0 5px;} #cssmenu > ul > li > a:after{ content:''; position:absolute; border-right:1px solid; top:-1px; bottom:-1px; right:-2px; z-index:99; } #cssmenu ul li.has-sub:hover > a:after{top:0; bottom:0;} #cssmenu > ul > li.has-sub > a:before{ content:''; position:absolute; top:18px; right:6px; border:5px solid transparent; border-top:5px solid #fff; } #cssmenu > ul > li.has-sub:hover > a:before{top:19px;} #cssmenu ul li.has-sub:hover > a{ background:#3f3f3f; border-color:#3f3f3f; padding-bottom:13px; padding-top:13px; top:-1px; z-index:999; } #cssmenu ul li.has-sub:hover > ul, #cssmenu ul li.has-sub:hover > div{display:block;} #cssmenu ul li.has-sub > a:hover{background:#3f3f3f; border-color:#3f3f3f;} #cssmenu ul li > ul, #cssmenu ul li > div{ display:none; width:auto; position:absolute; top:38px; padding:10px 0; background:#3f3f3f; border-radius:0 0 5px 5px; z-index:999; } #cssmenu ul li > ul{width:200px;} #cssmenu ul li > ul li{display:block; list-style:inside none; padding:0; margin:0; position:relative;} #cssmenu ul li > ul li a{ outline:none; display:block; position:relative; margin:0; padding:8px 20px; font:10pt "Lucida Grande", Helvetica, sans-serif; color:#fff; text-decoration:none; text-shadow:1px 1px 0 rgba(0,0,0, 0.5); } #cssmenu, #cssmenu > ul > li > ul > li a:hover{ background:#333333; background:-moz-linear-gradient(top, #333333 0%, #222222 100%); background:-webkit-gradient(linear, left top, left bottom, color-stop(0%,#333333), color-stop(100%,#222222)); background:-webkit-linear-gradient(top, #333333 0%,#222222 100%); background:-o-linear-gradient(top, #333333 0%,#222222 100%); background:-ms-linear-gradient(top, #333333 0%,#222222 100%); background:linear-gradient(top, #333333 0%,#222222 100%); filter:progid:DXImageTransform.Microsoft.gradient( startColorstr='#333333', endColorstr='#222222',GradientType=0 ); } #cssmenu{border-color:#000;} #cssmenu > ul > li > a{border-right:1px solid #000; color:#fff;} #cssmenu > ul > li > a:after{border-color:#444;} #cssmenu > ul > li > a:hover{background:#111;} #cssmenu > ul > li.active > a{ color:orange; } .header{ clear:both; } The problem is that, whenever I hover on the dropdown-menu, that a 1px margin appears in between the menu and the header. Can I solve that? I can't seem to find the solution.

    Read the article

  • CodePlex Daily Summary for Wednesday, July 04, 2012

    CodePlex Daily Summary for Wednesday, July 04, 2012Popular ReleasesMVC Controls Toolkit: Mvc Controls Toolkit 2.2.0: Added Modified all Mv4 related features to conform with the Mvc4 RC Now all items controls accept any IEnumerable<T>(before just List<T> were accepted by most of controls) retrievalManager class that retrieves automatically data from a data source whenever it catchs events triggered by filtering, sorting, and paging controls move method to the updatesManager to move one child objects from a father to another. The move operation can be undone like the insert, update and delete operatio...BlackJumboDog: Ver5.6.6: 2012.07.03 Ver5.6.6 (1) ???????????ftp://?????????、????LIST?????Mini SQL Query: Mini SQL Query (v1.0.68.441): Just a bug fix release for when the connections try to refresh after an edit. Make sure you read the Quickstart for an introduction.Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.58: Fix for Issue #18296: provide "ALL" value to the -ignore switch to ignore all error and warning messages. Fix for issue #18293: if encountering EOF before a function declaration or expression is properly closed, throw an appropriate error and don't crash. Adjust the variable-renaming algorithm so it's very specific when renaming variables with the same number of references so a single source file ends up with the same minified names on different platforms. add the ability to specify kno...LogExpert: 1.4 build 4566: This release for the 1.4 version line contains various fixes which have been made some times ago. Until now these fixes were only available in the 1.5 alpha versions. It also contains a fix for: 710. Column finder (press F8 to show) Terminal server issues: Multiple sessions with same user should work now Settings Export/Import available via Settings Dialog still incomple (e.g. tab colors are not saved) maybe I change the file format one day no command line support yet (for importin...DynamicToSql: DynamicToSql 1.0.0 (beta): 1.0.0 beta versionCommonLibrary.NET: CommonLibrary.NET 0.9.8.5 - Final Release: A collection of very reusable code and components in C# 4.0 ranging from ActiveRecord, Csv, Command Line Parsing, Configuration, Holiday Calendars, Logging, Authentication, and much more. FluentscriptCommonLibrary.NET 0.9.8 contains a scripting language called FluentScript. Releases notes for FluentScript located at http://fluentscript.codeplex.com/wikipage?action=Edit&title=Release%20Notes&referringTitle=Documentation Fluentscript - 0.9.8.5 - Final ReleaseApplication: FluentScript Versio...SharePoint 2010 Metro UI: SharePoint 2010 Metro UI8: Please review the documentation link for how to install. Installation takes some basic knowledge of how to upload and edit SharePoint Artifact files. Please view the discussions tab for ongoing FAQsnopCommerce. Open source shopping cart (ASP.NET MVC): nopcommerce 2.60: Highlight features & improvements: • Significant performance optimization. • Use AJAX for adding products to the cart. • New flyout mini-shopping cart. • Auto complete suggestions for product searching. • Full-Text support. • EU cookie law support. To see the full list of fixes and changes please visit the release notes page (http://www.nopCommerce.com/releasenotes.aspx).THE NVL Maker: The NVL Maker Ver 3.51: http://download.codeplex.com/Download?ProjectName=nvlmaker&DownloadId=371510 ????:http://115.com/file/beoef05k#THE-NVL-Maker-ver3.51-sim.7z ????:http://www.mediafire.com/file/6tqdwj9jr6eb9qj/THENVLMakerver3.51tra.7z ======================================== ???? ======================================== 3.51 beta ???: ·?????????????????????? ·?????????,?????????0,?????????????????????? ·??????????????????????????? ·?????????????TJS????(EXP??) ·??4:3???,???????????????,??????????? ·?????????...????: ????2.0.3: 1、???????????。 2、????????。 3、????????????。 4、bug??,????。AssaultCube Reloaded: 2.5 Intrepid: Linux has Ubuntu 11.10 32-bit precompiled binaries and Ubuntu 10.10 64-bit precompiled binaries, but you can compile your own as it also contains the source. If you are using Mac or other operating systems, download the Linux package. Try to compile it. If it fails, download a virtual machine. The server pack is ready for both Windows and Linux, but you might need to compile your own for Linux (source included) You should delete /home/config/saved.cfg to reset binds/other stuff If you us...Magelia WebStore Open-source Ecommerce software: Magelia WebStore 2.0: User Right Licensing ContentType version 2.0.267.1Bongiozzo Photosite: Alpha: Just first stable releaseMDS MODELING WORKBOOK: MDS MODELING WORKBOOK: This is the initial release. Works with SQL 2008 R2 Master Data Services. Also works with SQL 2012 Master Data Services but has not been completely tested.Logon Screen Launcher: Logon Screen Launcher 1.3.0: FIXED - Minor handle leak issueBF3Rcon.NET: BF3Rcon.NET 25.0: This update brings the library up to server release R25, which includes the few additions from R21. There are also some minor bug fixes and a couple of other minor changes. In addition, many methods now take advantage of the RconResult class, which will give error information on failed requests; this replaces the bool returned by many methods. There is also an implicit conversion from RconResult to bool (both of which were true on success), so old code shouldn't break. ChangesAdded Player.S...TelerikMvcGridCustomBindingHelper: Version 1.0.15.183-RC: TelerikMvcGridCustomBindingHelper 1.0.15.183 RC This is a RC (release candidate) version, please test and report any error or problem you encounter. Warning: There are many changes in this release and some of them break backward compatibility. Release notes (since 0.5.0-Alpha version): Custom aggregates via an inherited class or inline fluent function Ignore group on aggregates for better performance Projections (restriction of the database columns queried) for an even better performa...PunkBuster™ Screenshot Viewer: PunkBuster™ Screenshot Viewer 1.0: First release of PunkBuster™ Screenshot ViewerDesigning Windows 8 Applications with C# and XAML: Chapters 1 - 7 Release Preview: Source code for all examples from Chapters 1 - 7 for the Release PreviewNew ProjectsAzureMVC4: hiBoonCraft Launcher: BoonCraft Launcher V2.0 See http://352n.dyndns.org for more info on BoonCraftC# to Javascript: Have you ever wanted to automagically have access to the enums you use in your .NET code in the javascript code you're writing for client-side?CMCIC payment gateway provider for NB_Store: CMCIC payment gateway provider for NB_StoreCOFE2 : Cloud Over IFileSystemInfo Entries Extensions: COFE2 enable user to access the user-defined file system on local or foreign computer, using a System.IO-like interface or a RESTful Web API.Directory access via LDAP: .NET library for managing a directory via LDAP.E-mail processing: .NET library for processing e-mail.FAST Search for SharePoint Query Statistics: F4SP Query Statistics scans the FAST for SharePoint Query Logs and presents statistics based on the logs. Total Queries, Top Queries, Queries per user etc...File Backup: This project is an open source windows azure cloud backup win forms application.HanxiaoFu's personal: This will help synchronizing my work done in home and at workLifekostyuk: This is my first project on TFSNet WebSocket Server: NetWebSocket Server is c# based hight performance and scalable Websocket server. Posroid for Windows 8: ?? ??????? ????? ?? ?? ????? ??? ?? ??? ??? ???? ? ? ???, ???8??? ???? ?? ??? ? ? ??? ??? ????? ?????.PowerRules: PowerRules is a group of scripts that help you audit your farm for Configuration Drift (Configuration changes over time)Projet Niloc TETRAS: Student Project to know how to manage and coordinating a team.proyectobanco: PROFE AQUI ESTA EL PROYECTO DISCULPE NOMAS ATT SANCANsheetengine - Isometric HTML5 JavaScript Display Engine: Sheetengine is an HTML5 canvas based isometric display engine for JavaScript. It features textures, z-ordering, shadows, intersecting sheets, object movements.Shiny2: GTS Spoofing program for Generation IV and V of Pokemon.SMS Backup & Restore XML to MySQL: The purpose is to take the XML files created by SMS Backup and Restore (Android) and importing them via a Dropbox/Google Drive synch into a MySQL dbStundenplan TSST: App für Windows Phone um die einzelnen Vertretungspläne der technischen Schule Steinfurt anzusehenswalmacenamiento: Proyecto para el almacenamiento de registrosTFS Work Item Association Check-in Policy: This policy requires TFS source control check-ins to be associated with a single, in-progress task that is assigned to you.TurboTemplate: TurboTemplate is a fast source code generation helper which quick transforms between your SQL database and some templated text of your choice.visblog: this is short summary of my projectVisualHG_fliedonion: This is fork of VisualHG. This will used by improve VisualHG for me. support only Visual Studio 2008 (not SP1). Wave Tag Library: A very simple and modest .wav file tag library. With this library you can load .wav files, edit the tags (equivalent to mp3's ID3 tags) and save back to file.Wordpress: WordPress is web software you can use to create a beautiful website or blog. We like to say that WordPress is both free and priceless at the same time.ZEAL-C02 Bluetooth module Driver for Netduino: A class library for the .NET Micro Framework to support the Zeal-C02 Bluetooth module for Netduino.

    Read the article

  • CodePlex Daily Summary for Friday, November 01, 2013

    CodePlex Daily Summary for Friday, November 01, 2013Popular ReleasesFamily Tree Analyzer: Version 3.0.3.0-beta test3: Count Isle of Man as England & Wales for Census Lost Cousins text was preventing drag n drop of files Lost Cousins no Countries form wont open more than one copy Changed sort order of Lost Cousins buttons to match report which matches Lost Cousins website UK Census date verification is only applied to UK facts Counts duplicate Lost Cousins facts Added report for Lost Cousins facts but no census fact Added Census Duplicate and Census Missing Location reports BEF & AFT residence facts were coun...uComponents: uComponents v6.0.0: This release of uComponents will compile against and support the new API in Umbraco v6.1.0. What's new in uComponents v6.0.0? New features / Resolved issuesThe following workitems have been implemented and/or resolved: 14781 14805 14808 14818 14854 14827 14868 14859 14790 14853 14790 DataType Grid 14788 14810 Drag & Drop support for rows Support for 11 new datatypes (to a total of 20 datatypes): Color Picker Dropdown Checklist Enum Checboxlist Enum Dropdownl...Local History for Visual Studio: Local History - 1.0: New - Support for Visual Studio 2013SmartStore.NET - Free ASP.NET MVC Ecommerce Shopping Cart Solution: SmartStore.NET 1.2.1: New FeaturesAdded option Limit to current basket subtotal to HadSpentAmount discount rule Items in product lists can be labelled as NEW for a configurable period of time Product templates can optionally display a discount sign when discounts were applied Added the ability to set multiple favicons depending on stores and/or themes Plugin management: multiple plugins can now be (un)installed in one go Added a field for the HTML body id to store entity (Developer) New property 'Extra...Community Forums NNTP bridge: Community Forums NNTP Bridge V54 (LiveConnect): This is the first release which can be used with the new LiveConnect authentication. Fixes the problem that the authentication will not work after 1 hour. Also a logfile will now be stored in "%AppData%\Community\CommunityForumsNNTPServer". If you have any problems please feel free to sent me the file "LogFile.txt".WPF Extended DataGrid: WPF Extended DataGrid 2.0.0.9 binaries: Fixed issue with ICollectionView containg null values (AutoFilter issue)Community TFS Build Extensions: October 2013: The October 2013 release contains Scripts - a new addition to our delivery. These are a growing library of PowerShell scripts to use with VS2013. See our documentation for more on scripting. VS2010 Activities(target .NET 4.0) VS2012 Activities (target .NET 4.5) VS2013 Activities (target .NET 4.5.1) Community TFS Build Manager VS2012 Community TFS Build Manager VS2013 The Community TFS Build Managers for VS2010, 2012 and 2013 can also be found in the Visual Studio Gallery where upda...SuperSocket, an extensible socket server framework: SuperSocket 1.6 stable: Changes included in this release: Process level isolation SuperSocket ServerManager (include server and client) Connect to client from server side initiatively Client certificate validation New configuration attributes "textEncoding", "defaultCulture", and "storeLocation" (certificate node) Many bug fixes http://docs.supersocket.net/v1-6/en-US/New-Features-and-Breaking-ChangesBarbaTunnel: BarbaTunnel 8.1: Check Version History for more information about this release.Collections2: Collections2 v.1.1: Collection2 v.1.1 is the 1st developer and user release of the Collections2 library. The library contains 3 classes TwoWayDictionary<S,T>, TwoWayDictionary<T>, and TwoWayDictException. Binaries are available for .NET 2.0-3.5 (Binary Collections2NET2.0 v.1.1.1.1) and .NET 4.0 (Binary Collections2NET4 v.1.1.1.1). Also available are a source code zip file (Source Collections2NET4 v.1.1.1.1.zip) containing a solution file, and, example console and library project files for Visual Studio 2010. ...Mugen MVVM Toolkit: Mugen MVVM Toolkit 2.1: v 2.1 Added the 'Should' class instead of the 'Validate' class. The 'Validate' class is now obsolete. Added 'Toolkit.Annotations' to support the Mugen MVVM Toolkit ReSharper plugin. Updated JetBrains annotations within the project. Added the 'GlobalSettings.DefaultActivationPolicy' property to represent the default activation policy. Removed the 'GetSettings' method from the 'ViewModelBase' class. Instead of it, the 'GlobalSettings.DefaultViewModelSettings' property is used. Updated...NAudio: NAudio 1.7: full release notes available at http://mark-dot-net.blogspot.co.uk/2013/10/naudio-17-release-notes.htmlDirectX Tool Kit: October 2013: October 28, 2013 Updated for Visual Studio 2013 and Windows 8.1 SDK RTM Added DGSLEffect, DGSLEffectFactory, VertexPositionNormalTangentColorTexture, and VertexPositionNormalTangentColorTextureSkinning Model loading and effect factories support loading skinned models MakeSpriteFont now has a smooth vs. sharp antialiasing option: /sharp Model loading from CMOs now handles UV transforms for texture coordinates A number of small fixes for EffectFactory Minor code and project cleanup ...ExtJS based ASP.NET Controls: FineUI v4.0beta1: +2013-10-28 v4.0 beta1 +?????Collapsed???????????????。 -????:window/group_panel.aspx??,???????,???????,?????????。 +??????SelectedNodeIDArray???????????????。 -????:tree/checkbox/tree_checkall.aspx??,?????,?????,????????????。 -??TimerPicker???????(????、????ing)。 -??????????????????????(???)。 -?????????????,??type=text/css(??~`)。 -MsgTarget???MessageTarget,???None。 -FormOffsetRight?????20px??5px。 -?Web.config?PageManager??FormLabelAlign???。 -ToolbarPosition??Left/Right。 -??Web.conf...CODE Framework: 4.0.31028.0: See change notes in the documentation section for details on what's new. Note: If you download the class reference help file with, you have to right-click the file, pick "Properties", and then unblock the file, as many browsers flag the file as blocked during download (for security reasons) and thus hides all content.VidCoder: 1.5.10 Beta: Broke out all the encoder-specific passthrough options into their own dropdown. This should make what they do a bit more clear and clean up the codec list a bit. Updated HandBrake core to SVN 5855.Indent Guides for Visual Studio: Indent Guides v14: ImportantThis release has a separate download for Visual Studio 2010. The first link is for VS 2012 and later. Version History Changed in v14 Improved performance when scrolling and editing Fixed potential crash when Resharper is installed Fixed highlight of guides split around pragmas in C++/C# Restored VS 2010 support as a separate download Changed in v13 Added page width guide lines Added guide highlighting options Fixed guides appearing over collapsed blocks Fixed guides not...ASP.net MVC Awesome - jQuery Ajax Helpers: 3.5.3 (mvc5): version 3.5.3 - support for mvc5 version 3.5.2 - fix for setting single value to multivalue controls - datepicker min max date offset fix - html encoding for keys fix - enable Column.ClientFormatFunc to be a function call that will return a function version 3.5.1 ========================== - fixed html attributes rendering - fixed loading animation rendering - css improvements version 3.5 ========================== - autosize for all popups ( can be turned off by calling in js...Media Companion: Media Companion MC3.585b: IMDB plot scraping Fixed. New* Movie - Rename Folder using Movie Set, option to move ignored articles to end of Movie Set, only for folder renaming. Fixed* Media Companion - Fixed if using profiles, config files would blown up in size due to some settings duplicating. * Ignore Article of An was cutting of last character of movie title. * If Rescraping title, sort title changed depending on 'Move article to end of Sort Title' setting. * Movie - If changing Poster source order, list would beco...Custom Controls for TFS Work Item Tracking: 1.2.0.0: This is a maintenance release that adds support for TFS 2013. The control pack contains the following work item custom controls: MultiValueControl: a ComboBox to accept and show multiple values for a field by showing a list of checkboxes. More details here: MultiValue Control ScreenshotControl: a simple control (button) to capture a screenshot as a work item attachment. More details here: Screenshot controls. AttachmentsControl: this control cab be used as an alternative to the standar...New Projects3DChemFold: TODOAcc Oct2013 Liq2 MVC3EF5: Proyecto hecho en mvc3 con Entity Framework 5 para liquidación de sueldosAssociated List Box Control: A server side control combining list boxes and buttons to move items between lists. This has custom list boxes developed from a user control in ASP.Net website.AutoSPCUInstaller: Install the SharePoint Cumulative Update without pain. Use the AutoSPCUInstaller for a clean an easy installation process.Catalano Secure Delete: Delete your privacy data permanently.Duplica: Duplica is console (Command Prompt) tool aimed to duplicate existing file into a desired destination.High performance xll add-ins for Excel: A modern C++ interface to the Microsoft Excel SDK.Home Server SMART Classic: Home Server SMART is a hard disk and SSD health monitoring, reporting and alerting tool for Windows Home Server.Message Locked Encryption Library for .NET: A MLE (Message Locked Encryption) library developed for the .NET FrameworkMuServer: Web server mainly for streaming media to web browsing capable devices.MVA: Code examples from the book Programming in C# Exam Ref 70-483.NETCommon: This is only common library for NETonioncry: onion makes the aliens cry :(sfast: cms、??????、??????SPWrap - TileBoard Webpart: SPWrap Suite: Contains web parts that are wrapping existing libraries and features into reusable & fully configurable SharePoint components.TFS Build Launcher: A single command line utility to launch your TFS builds, allowing you to pass values into build process parameters.UsefulTools: A collection of useful extension methods and utility classes for .NET in general and WPFVirtual Book Libreria Online: Proyecto Libreria entity frame 5.0XML File Editor: XML Editor

    Read the article

  • CodePlex Daily Summary for Sunday, February 27, 2011

    CodePlex Daily Summary for Sunday, February 27, 2011Popular ReleasesVidCoder: 0.8.2: Updated auto-naming to handle seconds and frames ranges as well. Deprecated the {chapters} token for auto-naming in favor of {range}. Allowing file drag to preview window and enabling main window shortcut keys to work no matter what window is focused. Added option in config to enable giving custom names to audio tracks. (Note that these names will only show up certain players like iTunes or on the iPod. Players that support custom track names normally may not show them.) Added tooltips ...DirectQ: Release 1.8.7 Beta 2: Beta 2 release to fix some early reported problems with the original 1.8.7 Beta.Chiave File Encryption: Chiave 0.9.2: Release Notes Application for file encryption and decryption using 512 Bit rijndael encyrption algorithm with simple to use UI. Its written in C# and compiled in .Net version 3.5. It incorporates features of Windows 7 like Jumplists, Taskbar progress and Aero Glass. Now with added support to Windows XP! Change Log from 0.9.1 to 0.9.2: ==================== Added: > Now it displays number of files added in the wizard to the Window Title bar. > Added support to Windows XP. > Minor UI tweaks. I...Claims Based Identity & Access Control Guide: Drop 1 - Claims Identity Guide V2: Highlights of drop #1 This is the first drop of the new "Claims Identity Guide" edition. In this release you will find: All previous samples updated and enhanced. All code upgraded to .NET 4 and Visual Studio 2010. Extensive cleanup. Refactored Simulated Issuers: each solution now gets its own issuers. This results in much cleaner and simpler to understand code. Added Single Sign Out support. Added first sample using ACS ("ACS as a Federation Provider"). This sample extends the ori...Simple Notify: Simple Notify Beta 2011-02-25: Feature: host the service with a single click in console Feature: host the service as a windows service Feature: notification cient application Feature: push client application Feature: push notifications from your powershell script Feature: C# wrapper libraries for your applicationsMono.Addins: Mono.Addins 0.6: The 0.6 release of Mono.Addins includes many improvements, bug fixes and new features: Add-in engine Add-in name and description can now be localized. There are new custom attributes for defining them, and can also be specified as xml elements in an add-in manifest instead of attributes. Support for custom add-in properties. It is now possible to specify arbitrary properties in add-ins, which can be queried at install time (using the Mono.Addins.Setup API) or at run-time. Custom extensio...patterns & practices: Project Silk: Project Silk Community Drop 3 - 25 Feb 2011: IntroductionWelcome to the third community drop of Project Silk. For this drop we are requesting feedback on overall application architecture, code review of the JavaScript Conductor and Widgets, and general direction of the application. Project Silk provides guidance and sample implementations that describe and illustrate recommended practices for building modern web applications using technologies such as HTML5, jQuery, CSS3 and Internet Explorer 9. This guidance is intended for experien...PhoneyTools: Initial Release (0.1): This is the 0.1 version for preview of the features.Minemapper: Minemapper v0.1.5: Now supports new Minecraft beta v1.3 map format, thanks to updated mcmap. Disabled biomes, until Minecraft Biome Extractor supports new format.Smartkernel: Smartkernel: ????,??????Coding4Fun Tools: Coding4Fun.Phone.Toolkit v1.2: New control, Toast Prompt! Removed progress bar since Silverlight Toolkit Feb 2010 has it.Umbraco CMS: Umbraco 4.7: Service release fixing 31 issues. A full changelog will be available with the final stable release of 4.7 Important when upgradingUpgrade as if it was a patch release (update /bin, /umbraco and /umbraco_client). For general upgrade information follow the guide found at http://our.umbraco.org/wiki/install-and-setup/upgrading-an-umbraco-installation 4.7 requires the .NET 4.0 framework Web.Config changes Update the web web.config to include the 4 changes found in (they're clearly marked in...HubbleDotNet - Open source full-text search engine: V1.1.0.0: Add Sqlite3 DBAdapter Add App Report when Query Cache is Collecting. Improve the performance of index through Synchronize. Add top 0 feature so that we can only get count of the result. Improve the score calculating algorithm of match. Let the score of the record that match all items large then others. Add MySql DBAdapter Improve performance for multi-fields sort . Using hash table to access the Payload data. The version before used bin search. Using heap sort instead of qui...DJME - The jQuery extensions for ASP.NET MVC: DJME2 -The jQuery extensions for ASP.NET MVC beta3: Grid jQuery Mvc extension is added,the Grid extension support data binding, server / client (ajax) mode, master/detail view, scrolling, paging, filtering, grouping and sorting. For more product info you can goto http://www.dotnetage.com/djme.htmlSilverlight????[???]: silverlight????[???]2.0: ???????,?????,????????silverlight??????。DBSourceTools: DBSourceTools_1.3.0.0: Release 1.3.0.0 Changed editors from FireEdit to ICSharpCode.TextEditor. Complete re-vamp of Intellisense ( further testing needed). Hightlight Field and Table Names in sql scripts. Added field dropdown on all tables and views in DBExplorer. Added data option for viewing data in Tables. Fixed comment / uncomment bug as reported by tareq. Included Synonyms in scripting engine ( nickt_ch ).IronPython: 2.7 Release Candidate 1: We are pleased to announce the first Release Candidate for IronPython 2.7. This release contains over two dozen bugs fixed in preparation for 2.7 Final. See the release notes for 60193 for details and what has already been fixed in the earlier 2.7 prereleases. - IronPython TeamCaliburn Micro: A Micro-Framework for WPF, Silverlight and WP7: Caliburn.Micro 1.0 RC: This is the official Release Candicate for Caliburn.Micro 1.0. The download contains the binaries, samples and VS templates. VS Templates The templates included are designed for situations where the Caliburn.Micro source needs to be embedded within a single project solution. This was targeted at government and other organizations that expressed specific requirements around using an open source project like this. NuGet This release does not have a corresponding NuGet package. The NuGet pack...Rawr: Rawr 4.0.20 Beta: Rawr is now web-based. The link to use Rawr4 is: http://elitistjerks.com/rawr.phpThis is the Cataclysm Beta Release. More details can be found at the following link http://rawr.codeplex.com/Thread/View.aspx?ThreadId=237262 As of the 4.0.16 release, you can now also begin using the new Downloadable WPF version of Rawr!This is a pre-alpha release of the WPF version, there are likely to be a lot of issues. If you have a problem, please follow the Posting Guidelines and put it into the Issue Trac...PowerGUI Visual Studio Extension: PowerGUI VSX 1.3.2: New FeaturesPowerGUI Console Tool Window PowerShell Project Type PowerGUI 2.4 SupportNew ProjectsAppology SugarSync API: A SugarSync API for Windows Desktop, Silverlight, and Windows Phone 7.CodeField - collection of sample code on algorithms: Collection of sample code on algorithms. It's contributed by myself. There's no plan to release them as a single product or part of it.Donsole: A live debugger console for windows client applications.F# AlgoLib: F# Algorithm Library - fully open source - under constructionFileShred: An easy-to-use secure File ShredderHyperlinked Validation System for WinForms: A very small system for validating complex forms in WinForms. It´s simple to use and takes a massive piece of work.KFtpClient - Ftp client (core et helper): <project name>kFtpClientmanagedCUDA: managedCUDA makes the CUDA Driver API available in .net. It also includes classes for an easy handling and interop with CUDA, i.e. build-in CUDA types like float3, but also classes for thread safe CUDA-context handling.Mini Dots: A simplified dots game with two remote playersMovieCollection: Programm to manage movie filesMSForge NextGen: MSForge NextGen je projekat izrade novog web sajta za MIcrosoft Community u Srbiji, što obuhvata izradu nekoliko wireframe-ova, dizajn Orchard CMS tema, alata za migraciu sadržaja sa starog sajta...OdeToFood: For people who love food ... and code. This is a sample application for ASP.NET MVC 3 using C# and Razor. PanzerTemplate: PanzerTemplate ????? http://zsharedcode.googlecode.com/ ???,??? zsharedcode ? panzer ?????????,??? DataWindowCore,IEBrowser ?,?? panzer ?????,??????????????。 ??????????????,???????????????。Sanal bildirimler: Sanal bildirisilverlight123_Shreous_Internal: This an project developed for internal purposeSkyper: TODOThai Airway & Nok Air WP7 App.: Flight Booking, Flight Info, Flight Check In.TicketValidator: A .net CF application to validate tickets with a barcode. A Denso BHT-420BW is used in my case.Toggl Time Traking for Windows Phone 7: Toggl is a web application that provides an easy way to track time spent on projects. It works well for both teams and freelancers. Unida Gestão Acadêmica: Sistema de Gestão Acadêmica

    Read the article

  • Fraud Detection with the SQL Server Suite Part 1

    - by Dejan Sarka
    While working on different fraud detection projects, I developed my own approach to the solution for this problem. In my PASS Summit 2013 session I am introducing this approach. I also wrote a whitepaper on the same topic, which was generously reviewed by my friend Matija Lah. In order to spread this knowledge faster, I am starting a series of blog posts which will at the end make the whole whitepaper. Abstract With the massive usage of credit cards and web applications for banking and payment processing, the number of fraudulent transactions is growing rapidly and on a global scale. Several fraud detection algorithms are available within a variety of different products. In this paper, we focus on using the Microsoft SQL Server suite for this purpose. In addition, we will explain our original approach to solving the problem by introducing a continuous learning procedure. Our preferred type of service is mentoring; it allows us to perform the work and consulting together with transferring the knowledge onto the customer, thus making it possible for a customer to continue to learn independently. This paper is based on practical experience with different projects covering online banking and credit card usage. Introduction A fraud is a criminal or deceptive activity with the intention of achieving financial or some other gain. Fraud can appear in multiple business areas. You can find a detailed overview of the business domains where fraud can take place in Sahin Y., & Duman E. (2011), Detecting Credit Card Fraud by Decision Trees and Support Vector Machines, Proceedings of the International MultiConference of Engineers and Computer Scientists 2011 Vol 1. Hong Kong: IMECS. Dealing with frauds includes fraud prevention and fraud detection. Fraud prevention is a proactive mechanism, which tries to disable frauds by using previous knowledge. Fraud detection is a reactive mechanism with the goal of detecting suspicious behavior when a fraudster surpasses the fraud prevention mechanism. A fraud detection mechanism checks every transaction and assigns a weight in terms of probability between 0 and 1 that represents a score for evaluating whether a transaction is fraudulent or not. A fraud detection mechanism cannot detect frauds with a probability of 100%; therefore, manual transaction checking must also be available. With fraud detection, this manual part can focus on the most suspicious transactions. This way, an unchanged number of supervisors can detect significantly more frauds than could be achieved with traditional methods of selecting which transactions to check, for example with random sampling. There are two principal data mining techniques available both in general data mining as well as in specific fraud detection techniques: supervised or directed and unsupervised or undirected. Supervised techniques or data mining models use previous knowledge. Typically, existing transactions are marked with a flag denoting whether a particular transaction is fraudulent or not. Customers at some point in time do report frauds, and the transactional system should be capable of accepting such a flag. Supervised data mining algorithms try to explain the value of this flag by using different input variables. When the patterns and rules that lead to frauds are learned through the model training process, they can be used for prediction of the fraud flag on new incoming transactions. Unsupervised techniques analyze data without prior knowledge, without the fraud flag; they try to find transactions which do not resemble other transactions, i.e. outliers. In both cases, there should be more frauds in the data set selected for checking by using the data mining knowledge compared to selecting the data set with simpler methods; this is known as the lift of a model. Typically, we compare the lift with random sampling. The supervised methods typically give a much better lift than the unsupervised ones. However, we must use the unsupervised ones when we do not have any previous knowledge. Furthermore, unsupervised methods are useful for controlling whether the supervised models are still efficient. Accuracy of the predictions drops over time. Patterns of credit card usage, for example, change over time. In addition, fraudsters continuously learn as well. Therefore, it is important to check the efficiency of the predictive models with the undirected ones. When the difference between the lift of the supervised models and the lift of the unsupervised models drops, it is time to refine the supervised models. However, the unsupervised models can become obsolete as well. It is also important to measure the overall efficiency of both, supervised and unsupervised models, over time. We can compare the number of predicted frauds with the total number of frauds that include predicted and reported occurrences. For measuring behavior across time, specific analytical databases called data warehouses (DW) and on-line analytical processing (OLAP) systems can be employed. By controlling the supervised models with unsupervised ones and by using an OLAP system or DW reports to control both, a continuous learning infrastructure can be established. There are many difficulties in developing a fraud detection system. As has already been mentioned, fraudsters continuously learn, and the patterns change. The exchange of experiences and ideas can be very limited due to privacy concerns. In addition, both data sets and results might be censored, as the companies generally do not want to publically expose actual fraudulent behaviors. Therefore it can be quite difficult if not impossible to cross-evaluate the models using data from different companies and different business areas. This fact stresses the importance of continuous learning even more. Finally, the number of frauds in the total number of transactions is small, typically much less than 1% of transactions is fraudulent. Some predictive data mining algorithms do not give good results when the target state is represented with a very low frequency. Data preparation techniques like oversampling and undersampling can help overcome the shortcomings of many algorithms. SQL Server suite includes all of the software required to create, deploy any maintain a fraud detection infrastructure. The Database Engine is the relational database management system (RDBMS), which supports all activity needed for data preparation and for data warehouses. SQL Server Analysis Services (SSAS) supports OLAP and data mining (in version 2012, you need to install SSAS in multidimensional and data mining mode; this was the only mode in previous versions of SSAS, while SSAS 2012 also supports the tabular mode, which does not include data mining). Additional products from the suite can be useful as well. SQL Server Integration Services (SSIS) is a tool for developing extract transform–load (ETL) applications. SSIS is typically used for loading a DW, and in addition, it can use SSAS data mining models for building intelligent data flows. SQL Server Reporting Services (SSRS) is useful for presenting the results in a variety of reports. Data Quality Services (DQS) mitigate the occasional data cleansing process by maintaining a knowledge base. Master Data Services is an application that helps companies maintaining a central, authoritative source of their master data, i.e. the most important data to any organization. For an overview of the SQL Server business intelligence (BI) part of the suite that includes Database Engine, SSAS and SSRS, please refer to Veerman E., Lachev T., & Sarka D. (2009). MCTS Self-Paced Training Kit (Exam 70-448): Microsoft® SQL Server® 2008 Business Intelligence Development and Maintenance. MS Press. For an overview of the enterprise information management (EIM) part that includes SSIS, DQS and MDS, please refer to Sarka D., Lah M., & Jerkic G. (2012). Training Kit (Exam 70-463): Implementing a Data Warehouse with Microsoft® SQL Server® 2012. O'Reilly. For details about SSAS data mining, please refer to MacLennan J., Tang Z., & Crivat B. (2009). Data Mining with Microsoft SQL Server 2008. Wiley. SQL Server Data Mining Add-ins for Office, a free download for Office versions 2007, 2010 and 2013, bring the power of data mining to Excel, enabling advanced analytics in Excel. Together with PowerPivot for Excel, which is also freely downloadable and can be used in Excel 2010, is already included in Excel 2013. It brings OLAP functionalities directly into Excel, making it possible for an advanced analyst to build a complete learning infrastructure using a familiar tool. This way, many more people, including employees in subsidiaries, can contribute to the learning process by examining local transactions and quickly identifying new patterns.

    Read the article

< Previous Page | 29 30 31 32 33 34 35 36  | Next Page >