Search Results

Search found 3084 results on 124 pages for 'lan'.

Page 33/124 | < Previous Page | 29 30 31 32 33 34 35 36 37 38 39 40  | Next Page >

• Hosts file in Apache keep changing for OS Linux Redhat [on hold]

  - by jack f

  I have installed Apache server. Two clients ex client_1 and client_2. The operation that we are performing on client_1 reflecting to client_2. We have etc/hosts file in our software install location which is keep on changing for client_2 with client_1 IP address. If I correct the entries in hosts file to client_2 also in the next few minuets it is changing automatically to the client_1(if we start the client_1 service). Please explain the use of hosts file and where and when it will change by Apache service. The hosts file in the location /etc/hosts/ for the both clients are same ============================================= Do not remove the following line, or various programs that require network functionality will fail. 127.0.0.1 localhost.localdomain localhost Local LAN 190.0.0.1 client_1.Example.com client_1 190.0.0.2 client_2.Example.com client_2 HR LAN 10.1.74.2 client_1hr peer 10.1.74.3 client_2hr ESP LAN 10.69.69.1 client_1esp 10.69.69.2 client_2esp Any help will be appreciated. Thanks in advance, Jack F

  Read the article

• Connecting guest OS to host os internet connection hyper-v

  - by autrevo

  Hyper-V internal switch and VM OS interfacing with Guest OS and IP Cofiguration When configuring hyper-v internal switch, Apart from physical lan adapter (say adapter 1), I see another LAN adapter (say adapter 2) added in host os. And we already have one virtual lan adapter in guest os, (say adapter 3) . adapter 1 is connected to internet with defaulty gateway say, 192.168.0.254 and uses class C IP. By con configuring adapter 2 and 3, I need to acheive two purpose - Access internet in guest os. seemlessly share files & folders between guest and host OS. Please, suggest, What is the best way to configure IP of these three adapters ?

  Read the article

• RV042 - how to broadcast UDP through VPN

  - by user47221

  I setup a gateway to gateway vpn connection with linksys RV042 router. i was able to ping each other, access file sharing ( with netbios enabled ). They are having same subnet mask 255.255.255.0, 192.168.1.0 <--- 192.168.2.0 Firewall disabled. But when i created/host LAN games (eg. warcraft3), it cannot be detect by clients at another site/LAN. As i know warcraft3 is using UDP broadcast to tell the client the game is creaetd. 1. How to broadcast UDP to another LAN ? any things to do with multicast ?

  Read the article

• Windows 7 - Static DHCP server address with dynamic IP Address

  - by mkstreet

  Is this possible? On my LAN, I would like to setup the network properties such that the DHCP server's address is static. However, I want that server to hand out the IP Addresses and DNS addresses dynamically. The reason is that some devices on the LAN will try to behave like a DHCP server. For example, we use software to push images to computers on the LAN (our computer software configurations are centrally managed). When that imaging distribution software happens to be running, the machines being imaged will get confused as to which device is the DHCP -- the real one or the machine that is sending them the image. So, to remove the confusion, I would like to setup my Windows 7 images such that the DHCP server address is statically assigned. And then that server would assign the IP Addresses and the DNS addresses dynamically.

  Read the article

• how to monitor traffic at port 53 (DNS)

  - by Registered User

  I am a bit confused with the abundant tcpdump tutorials on internet. I am having a few of the virtual machines running on a virtualization server.Where I am debugging a problem.Port 53 is the one in problem. I have a bridged setup where out of 4 LAN cards on the machine in question one is active and it is xen-br0 I want to check if there is any request coming on port 53 on the server by other machines on LAN in question. I also want to see if the guest operating systems on LAN or any other machine is sending traffic at port 53.Due to abundant messages being generated via tcpdump I am finding it difficult to grep the output at desired port. So how can I use it if some one can give an example that would be helpful. Thanks in advance.

  Read the article

• How do I install a driver for an Atheros AR9285?

  - by Fernando

  How to install the driver for Atheros AR9285 in Ubuntu 11.10. Still no package for 11.10 according to this https://help.ubuntu.com/community/WifiDocs/Device/Atheros/AR9285 Here is the output of the commands marc@fer-VPCYA1V9E:~$ sudo lshw -class network *-network DISABLED description: Wireless interface product: AR9285 Wireless Network Adapter (PCI-Express) vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 01 serial: 4c:0f:6e:d6:65:cc width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.0.0-12-generic firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:16 memory:d3400000-d340ffff *-network description: Ethernet interface product: AR8131 Gigabit Ethernet vendor: Atheros Communications physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: c0 serial: 54:42:49:a2:1f:bc capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI firmware=N/A latency=0 link=no multicast=yes port=twisted pair resources: irq:43 memory:d2400000-d243ffff ioport:1000(size=128) And the second command marc@fer-VPCYA1V9E:~$ rfkill list 0: sony-wifi: Wireless LAN Soft blocked: no Hard blocked: no 1: sony-bluetooth: Bluetooth Soft blocked: no Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: no 3: hci0: Bluetooth Soft blocked: no Hard blocked: no 4: acer-wireless: Wireless LAN Soft blocked: yes Hard blocked: no Is there a way to make it work?

  Read the article

• Wireless doesn't work on a Lenovo V570

  - by Stephen

  I've had Ubuntu installed on my HD for about 3 months but ever since I ran into this wireless issue I kinda lost my lust of Ubuntu. I have zero experience getting around with/ using the console command. I have a Lenovo V570. I got the driver update for the broadcom networking card via the Additional Drivers application but that did nothing. I love the look and feel of using Ubuntu but I have no technological experience for the matter. Any help would be awesome. When I scan for wireless connections while in Ubuntu, my computer picks up nothing, while on Win7 it will pick up the handful of wireless networks around my area. My wired connection is fine, but the use of not having wireless on a laptop is rather contradictory to it as a feature. Cheers! Also, I just installed 11.10, if that helps any. Yes, I used the search before I posted this, but again I have ZERO understanding of the command stuff and need a meat and potatoes answer(s). stephen@ubuntu:~$ sudo lshw -class network [sudo] password for stephen: *-network UNCLAIMED description: Network controller product: BCM4313 802.11b/g/n Wireless LAN Controller vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:03:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:f1900000-f1903fff *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:04:00.0 logical name: eth0 version: 06 serial: f0:de:f1:63:98:14 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8168e-2.fw ip=192.168.1.78 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:41 ioport:2000(size=256) memory:f1804000-f1804fff memory:f1800000-f1803fff stephen@ubuntu:~$ rfkill list all 0: ideapad_wlan: Wireless LAN Soft blocked: yes Hard blocked: no 1: acer-wireless: Wireless LAN Soft blocked: yes Hard blocked: no

  Read the article

• How to Reuse Your Old Wi-Fi Router as a Network Switch

  - by Jason Fitzpatrick

  Just because your old Wi-Fi router has been replaced by a newer model doesn’t mean it needs to gather dust in the closet. Read on as we show you how to take an old and underpowered Wi-Fi router and turn it into a respectable network switch (saving your $20 in the process). Image by mmgallan. Why Do I Want To Do This? Wi-Fi technology has changed significantly in the last ten years but Ethernet-based networking has changed very little. As such, a Wi-Fi router with 2006-era guts is lagging significantly behind current Wi-Fi router technology, but the Ethernet networking component of the device is just as useful as ever; aside from potentially being only 100Mbs instead of 1000Mbs capable (which for 99% of home applications is irrelevant) Ethernet is Ethernet. What does this matter to you, the consumer? It means that even though your old router doesn’t hack it for your Wi-Fi needs any longer the device is still a perfectly serviceable (and high quality) network switch. When do you need a network switch? Any time you want to share an Ethernet cable among multiple devices, you need a switch. For example, let’s say you have a single Ethernet wall jack behind your entertainment center. Unfortunately you have four devices that you want to link to your local network via hardline including your smart HDTV, DVR, Xbox, and a little Raspberry Pi running XBMC. Instead of spending $20-30 to purchase a brand new switch of comparable build quality to your old Wi-Fi router it makes financial sense (and is environmentally friendly) to invest five minutes of your time tweaking the settings on the old router to turn it from a Wi-Fi access point and routing tool into a network switch–perfect for dropping behind your entertainment center so that your DVR, Xbox, and media center computer can all share an Ethernet connection. What Do I Need? For this tutorial you’ll need a few things, all of which you likely have readily on hand or are free for download. To follow the basic portion of the tutorial, you’ll need the following: 1 Wi-Fi router with Ethernet ports 1 Computer with Ethernet jack 1 Ethernet cable For the advanced tutorial you’ll need all of those things, plus: 1 copy of DD-WRT firmware for your Wi-Fi router We’re conducting the experiment with a Linksys WRT54GL Wi-Fi router. The WRT54 series is one of the best selling Wi-Fi router series of all time and there’s a good chance a significant number of readers have one (or more) of them stuffed in an office closet. Even if you don’t have one of the WRT54 series routers, however, the principles we’re outlining here apply to all Wi-Fi routers; as long as your router administration panel allows the necessary changes you can follow right along with us. A quick note on the difference between the basic and advanced versions of this tutorial before we proceed. Your typical Wi-Fi router has 5 Ethernet ports on the back: 1 labeled “Internet”, “WAN”, or a variation thereof and intended to be connected to your DSL/Cable modem, and 4 labeled 1-4 intended to connect Ethernet devices like computers, printers, and game consoles directly to the Wi-Fi router. When you convert a Wi-Fi router to a switch, in most situations, you’ll lose two port as the “Internet” port cannot be used as a normal switch port and one of the switch ports becomes the input port for the Ethernet cable linking the switch to the main network. This means, referencing the diagram above, you’d lose the WAN port and LAN port 1, but retain LAN ports 2, 3, and 4 for use. If you only need to switch for 2-3 devices this may be satisfactory. However, for those of you that would prefer a more traditional switch setup where there is a dedicated WAN port and the rest of the ports are accessible, you’ll need to flash a third-party router firmware like the powerful DD-WRT onto your device. Doing so opens up the router to a greater degree of modification and allows you to assign the previously reserved WAN port to the switch, thus opening up LAN ports 1-4. Even if you don’t intend to use that extra port, DD-WRT offers you so many more options that it’s worth the extra few steps. Preparing Your Router for Life as a Switch Before we jump right in to shutting down the Wi-Fi functionality and repurposing your device as a network switch, there are a few important prep steps to attend to. First, you want to reset the router (if you just flashed a new firmware to your router, skip this step). Following the reset procedures for your particular router or go with what is known as the “Peacock Method” wherein you hold down the reset button for thirty seconds, unplug the router and wait (while still holding the reset button) for thirty seconds, and then plug it in while, again, continuing to hold down the rest button. Over the life of a router there are a variety of changes made, big and small, so it’s best to wipe them all back to the factory default before repurposing the router as a switch. Second, after resetting, we need to change the IP address of the device on the local network to an address which does not directly conflict with the new router. The typical default IP address for a home router is 192.168.1.1; if you ever need to get back into the administration panel of the router-turned-switch to check on things or make changes it will be a real hassle if the IP address of the device conflicts with the new home router. The simplest way to deal with this is to assign an address close to the actual router address but outside the range of addresses that your router will assign via the DHCP client; a good pick then is 192.168.1.2. Once the router is reset (or re-flashed) and has been assigned a new IP address, it’s time to configure it as a switch. Basic Router to Switch Configuration If you don’t want to (or need to) flash new firmware onto your device to open up that extra port, this is the section of the tutorial for you: we’ll cover how to take a stock router, our previously mentioned WRT54 series Linksys, and convert it to a switch. Hook the Wi-Fi router up to the network via one of the LAN ports (consider the WAN port as good as dead from this point forward, unless you start using the router in its traditional function again or later flash a more advanced firmware to the device, the port is officially retired at this point). Open the administration control panel via  web browser on a connected computer. Before we get started two things: first,  anything we don’t explicitly instruct you to change should be left in the default factory-reset setting as you find it, and two, change the settings in the order we list them as some settings can’t be changed after certain features are disabled. To start, let’s navigate to Setup ->Basic Setup. Here you need to change the following things: Local IP Address: [different than the primary router, e.g. 192.168.1.2] Subnet Mask: [same as the primary router, e.g. 255.255.255.0] DHCP Server: Disable Save with the “Save Settings” button and then navigate to Setup -> Advanced Routing: Operating Mode: Router This particular setting is very counterintuitive. The “Operating Mode” toggle tells the device whether or not it should enable the Network Address Translation (NAT)  feature. Because we’re turning a smart piece of networking hardware into a relatively dumb one, we don’t need this feature so we switch from Gateway mode (NAT on) to Router mode (NAT off). Our next stop is Wireless -> Basic Wireless Settings: Wireless SSID Broadcast: Disable Wireless Network Mode: Disabled After disabling the wireless we’re going to, again, do something counterintuitive. Navigate to Wireless -> Wireless Security and set the following parameters: Security Mode: WPA2 Personal WPA Algorithms: TKIP+AES WPA Shared Key: [select some random string of letters, numbers, and symbols like JF#d$di!Hdgio890] Now you may be asking yourself, why on Earth are we setting a rather secure Wi-Fi configuration on a Wi-Fi router we’re not going to use as a Wi-Fi node? On the off chance that something strange happens after, say, a power outage when your router-turned-switch cycles on and off a bunch of times and the Wi-Fi functionality is activated we don’t want to be running the Wi-Fi node wide open and granting unfettered access to your network. While the chances of this are next-to-nonexistent, it takes only a few seconds to apply the security measure so there’s little reason not to. Save your changes and navigate to Security ->Firewall. Uncheck everything but Filter Multicast Firewall Protect: Disable At this point you can save your changes again, review the changes you’ve made to ensure they all stuck, and then deploy your “new” switch wherever it is needed. Advanced Router to Switch Configuration For the advanced configuration, you’ll need a copy of DD-WRT installed on your router. Although doing so is an extra few steps, it gives you a lot more control over the process and liberates an extra port on the device. Hook the Wi-Fi router up to the network via one of the LAN ports (later you can switch the cable to the WAN port). Open the administration control panel via web browser on the connected computer. Navigate to the Setup -> Basic Setup tab to get started. In the Basic Setup tab, ensure the following settings are adjusted. The setting changes are not optional and are required to turn the Wi-Fi router into a switch. WAN Connection Type: Disabled Local IP Address: [different than the primary router, e.g. 192.168.1.2] Subnet Mask: [same as the primary router, e.g. 255.255.255.0] DHCP Server: Disable In addition to disabling the DHCP server, also uncheck all the DNSMasq boxes as the bottom of the DHCP sub-menu. If you want to activate the extra port (and why wouldn’t you), in the WAN port section: Assign WAN Port to Switch [X] At this point the router has become a switch and you have access to the WAN port so the LAN ports are all free. Since we’re already in the control panel, however, we might as well flip a few optional toggles that further lock down the switch and prevent something odd from happening. The optional settings are arranged via the menu you find them in. Remember to save your settings with the save button before moving onto a new tab. While still in the Setup -> Basic Setup menu, change the following: Gateway/Local DNS : [IP address of primary router, e.g. 192.168.1.1] NTP Client : Disable The next step is to turn off the radio completely (which not only kills the Wi-Fi but actually powers the physical radio chip off). Navigate to Wireless -> Advanced Settings -> Radio Time Restrictions: Radio Scheduling: Enable Select “Always Off” There’s no need to create a potential security problem by leaving the Wi-Fi radio on, the above toggle turns it completely off. Under Services -> Services: DNSMasq : Disable ttraff Daemon : Disable Under the Security -> Firewall tab, uncheck every box except “Filter Multicast”, as seen in the screenshot above, and then disable SPI Firewall. Once you’re done here save and move on to the Administration tab. Under Administration -> Management:  Info Site Password Protection : Enable Info Site MAC Masking : Disable CRON : Disable 802.1x : Disable Routing : Disable After this final round of tweaks, save and then apply your settings. Your router has now been, strategically, dumbed down enough to plod along as a very dependable little switch. Time to stuff it behind your desk or entertainment center and streamline your cabling.     

  Read the article

• wifi not recognized

  - by pumper

  I had wifi and worked then some day ubuntu asked me to update some packeages and restarted the system and after that no wifi. this is my wireless_script output : ########## wireless info START ########## ##### release ##### Distributor ID: Ubuntu Description: Ubuntu 14.04 LTS Release: 14.04 Codename: trusty ##### kernel ##### Linux S510p 3.13.0-24-generic #47-Ubuntu SMP Fri May 2 23:30:00 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux ##### lspci ##### 02:00.0 Network controller [0280]: Qualcomm Atheros QCA9565 / AR9565 Wireless Network Adapter [168c:0036] (rev 01) Subsystem: Lenovo Device [17aa:3026] Kernel driver in use: ath9k 03:00.0 Ethernet controller [0200]: Qualcomm Atheros AR8162 Fast Ethernet [1969:1090] (rev 10) Subsystem: Lenovo Device [17aa:3807] Kernel driver in use: alx ##### lsusb ##### Bus 001 Device 006: ID 0eef:a111 D-WAV Scientific Co., Ltd Bus 001 Device 007: ID 0cf3:3004 Atheros Communications, Inc. Bus 001 Device 004: ID 174f:1488 Syntek Bus 001 Device 003: ID 03f0:5607 Hewlett-Packard Bus 001 Device 002: ID 8087:8000 Intel Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 002 Device 002: ID 15d9:0a4c Trust International B.V. USB+PS/2 Optical Mouse Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub ##### PCMCIA Card Info ##### ##### rfkill ##### 0: ideapad_wlan: Wireless LAN Soft blocked: no Hard blocked: no 1: ideapad_bluetooth: Bluetooth Soft blocked: no Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: no 3: hci0: Bluetooth Soft blocked: no Hard blocked: no ##### iw reg get ##### country 00: (2402 - 2472 @ 40), (3, 20) (2457 - 2482 @ 40), (3, 20), PASSIVE-SCAN, NO-IBSS (2474 - 2494 @ 20), (3, 20), NO-OFDM, PASSIVE-SCAN, NO-IBSS (5170 - 5250 @ 40), (3, 20), PASSIVE-SCAN, NO-IBSS (5735 - 5835 @ 40), (3, 20), PASSIVE-SCAN, NO-IBSS ##### interfaces ##### # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback auto dsl-provider iface dsl-provider inet ppp pre-up /sbin/ifconfig wlan0 up # line maintained by pppoeconf provider dsl-provider auto wlan0 iface wlan0 inet manual ##### iwconfig ##### wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=16 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off ##### route ##### Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface ##### resolv.conf ##### ##### nm-tool ##### NetworkManager Tool State: connected (global) - Device: eth0 ----------------------------------------------------------------- Type: Wired Driver: alx State: unavailable Default: no HW Address: <MAC address removed> Capabilities: Carrier Detect: yes Wired Properties Carrier: off - Device: wlan0 ---------------------------------------------------------------- Type: 802.11 WiFi Driver: ath9k State: unmanaged Default: no HW Address: <MAC address removed> Capabilities: Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes Wireless Access Points ##### NetworkManager.state ##### [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true WimaxEnabled=true ##### NetworkManager.conf ##### [main] plugins=ifupdown,keyfile,ofono dns=dnsmasq no-auto-default=<MAC address removed>, [ifupdown] managed=false ##### iwlist ##### wlan0 Scan completed : Cell 01 - Address: <MAC address removed> Channel:1 Frequency:2.412 GHz (Channel 1) Quality=55/70 Signal level=-55 dBm Encryption key:on ESSID:"mohsen" Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s 9 Mb/s; 12 Mb/s; 18 Mb/s Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s Mode:Master Extra:tsf=000000076c342498 Extra: Last beacon: 12ms ago IE: Unknown: 00066D6F6873656E IE: Unknown: 010882848B960C121824 IE: Unknown: 030101 IE: Unknown: 2A0104 IE: Unknown: 32043048606C ##### iwlist channel ##### wlan0 13 channels in total; available frequencies : Channel 01 : 2.412 GHz Channel 02 : 2.417 GHz Channel 03 : 2.422 GHz Channel 04 : 2.427 GHz Channel 05 : 2.432 GHz Channel 06 : 2.437 GHz Channel 07 : 2.442 GHz Channel 08 : 2.447 GHz Channel 09 : 2.452 GHz Channel 10 : 2.457 GHz Channel 11 : 2.462 GHz Channel 12 : 2.467 GHz Channel 13 : 2.472 GHz ##### lsmod ##### ath3k 13318 0 bluetooth 395423 23 bnep,ath3k,btusb,rfcomm ath9k 164164 0 ath9k_common 13551 1 ath9k ath9k_hw 453856 2 ath9k_common,ath9k ath 28698 3 ath9k_common,ath9k,ath9k_hw mac80211 626489 1 ath9k cfg80211 484040 3 ath,ath9k,mac80211 ##### modinfo ##### filename: /lib/modules/3.13.0-24-generic/kernel/drivers/bluetooth/ath3k.ko firmware: ath3k-1.fw license: GPL version: 1.0 description: Atheros AR30xx firmware driver author: Atheros Communications srcversion: 98A5245588C09E5E41690D0 alias: usb:v0489pE036d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0489pE03Cd*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0489pE02Cd*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0CF3pE003d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0CF3p3121d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v13D3p3402d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v04C5p1330d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0489pE04Dd*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0489pE056d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0489pE04Ed*dc*dsc*dp*ic*isc*ip*in* alias: usb:v13D3p3393d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0489pE057d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0930p0220d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0930p0219d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0CF3pE005d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0CF3pE004d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v13D3p3362d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v04CAp3008d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v04CAp3006d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v04CAp3005d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v04CAp3004d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v13D3p3375d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0CF3p817Ad*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0CF3p311Dd*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0CF3p3008d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0CF3p3004d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0CF3p0036d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v03F0p311Dd*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0489pE027d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0489pE03Dd*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0930p0215d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v13D3p3304d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0CF3pE019d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0CF3p3002d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0CF3p3000d*dc*dsc*dp*ic*isc*ip*in* depends: bluetooth intree: Y vermagic: 3.13.0-24-generic SMP mod_unload modversions signer: Magrathea: Glacier signing key sig_key: <MAC address removed>:D9:06:21:70:6E:8D:06:60:4D:73:0B:35:9F:C0 sig_hashalgo: sha512 filename: /lib/modules/3.13.0-24-generic/kernel/drivers/net/wireless/ath/ath9k/ath9k.ko license: Dual BSD/GPL description: Support for Atheros 802.11n wireless LAN cards. author: Atheros Communications srcversion: BAF225EEB618908380B28DA alias: platform:qca955x_wmac alias: platform:ar934x_wmac alias: platform:ar933x_wmac alias: platform:ath9k alias: pci:v0000168Cd00000036sv*sd*bc*sc*i* alias: pci:v0000168Cd00000036sv0000185Fsd00003027bc*sc*i* alias: pci:v0000168Cd00000036sv00001B9Asd00002810bc*sc*i* alias: pci:v0000168Cd00000036sv0000144Fsd00007202bc*sc*i* alias: pci:v0000168Cd00000036sv00001A3Bsd00002130bc*sc*i* alias: pci:v0000168Cd00000036sv000011ADsd00000612bc*sc*i* alias: pci:v0000168Cd00000036sv000011ADsd00000652bc*sc*i* alias: pci:v0000168Cd00000036sv000011ADsd00000642bc*sc*i* alias: pci:v0000168Cd00000036sv0000168Csd0000302Cbc*sc*i* alias: pci:v0000168Cd00000036sv0000168Csd00003027bc*sc*i* alias: pci:v0000168Cd00000036sv0000144Dsd0000411Ebc*sc*i* alias: pci:v0000168Cd00000036sv0000144Dsd0000411Dbc*sc*i* alias: pci:v0000168Cd00000036sv0000144Dsd0000411Cbc*sc*i* alias: pci:v0000168Cd00000036sv0000144Dsd0000411Bbc*sc*i* alias: pci:v0000168Cd00000036sv0000144Dsd0000411Abc*sc*i* alias: pci:v0000168Cd00000036sv00001028sd0000020Ebc*sc*i* alias: pci:v0000168Cd00000036sv0000103Csd0000217Fbc*sc*i* alias: pci:v0000168Cd00000036sv0000103Csd000018E3bc*sc*i* alias: pci:v0000168Cd00000036sv000017AAsd00003026bc*sc*i* alias: pci:v0000168Cd00000036sv00001A3Bsd0000213Abc*sc*i* alias: pci:v0000168Cd00000036sv000011ADsd00000662bc*sc*i* alias: pci:v0000168Cd00000036sv000011ADsd00000672bc*sc*i* alias: pci:v0000168Cd00000036sv000011ADsd00000622bc*sc*i* alias: pci:v0000168Cd00000036sv0000185Fsd00003028bc*sc*i* alias: pci:v0000168Cd00000036sv0000105Bsd0000E069bc*sc*i* alias: pci:v0000168Cd00000036sv0000168Csd0000302Bbc*sc*i* alias: pci:v0000168Cd00000036sv0000168Csd00003026bc*sc*i* alias: pci:v0000168Cd00000036sv0000168Csd00003025bc*sc*i* alias: pci:v0000168Cd00000036sv00001B9Asd00002812bc*sc*i* alias: pci:v0000168Cd00000036sv00001B9Asd00002811bc*sc*i* alias: pci:v0000168Cd00000036sv000011ADsd00006671bc*sc*i* alias: pci:v0000168Cd00000036sv000011ADsd00000632bc*sc*i* alias: pci:v0000168Cd00000036sv0000185Fsd0000A119bc*sc*i* alias: pci:v0000168Cd00000036sv0000105Bsd0000E068bc*sc*i* alias: pci:v0000168Cd00000036sv00001A3Bsd00002176bc*sc*i* alias: pci:v0000168Cd00000036sv0000168Csd00003028bc*sc*i* alias: pci:v0000168Cd00000037sv*sd*bc*sc*i* alias: pci:v0000168Cd00000034sv*sd*bc*sc*i* alias: pci:v0000168Cd00000034sv000010CFsd00001783bc*sc*i* alias: pci:v0000168Cd00000034sv000014CDsd00000064bc*sc*i* alias: pci:v0000168Cd00000034sv000014CDsd00000063bc*sc*i* alias: pci:v0000168Cd00000034sv0000103Csd00001864bc*sc*i* alias: pci:v0000168Cd00000034sv000011ADsd00006641bc*sc*i* alias: pci:v0000168Cd00000034sv000011ADsd00006631bc*sc*i* alias: pci:v0000168Cd00000034sv00001043sd0000850Ebc*sc*i* alias: pci:v0000168Cd00000034sv00001A3Bsd00002110bc*sc*i* alias: pci:v0000168Cd00000034sv00001969sd00000091bc*sc*i* alias: pci:v0000168Cd00000034sv000017AAsd00003214bc*sc*i* alias: pci:v0000168Cd00000034sv0000168Csd00003117bc*sc*i* alias: pci:v0000168Cd00000034sv000011ADsd00006661bc*sc*i* alias: pci:v0000168Cd00000034sv00001A3Bsd00002116bc*sc*i* alias: pci:v0000168Cd00000033sv*sd*bc*sc*i* alias: pci:v0000168Cd00000032sv*sd*bc*sc*i* alias: pci:v0000168Cd00000032sv00001043sd0000850Dbc*sc*i* alias: pci:v0000168Cd00000032sv00001B9Asd00001C01bc*sc*i* alias: pci:v0000168Cd00000032sv00001B9Asd00001C00bc*sc*i* alias: pci:v0000168Cd00000032sv00001A3Bsd00001F95bc*sc*i* alias: pci:v0000168Cd00000032sv00001A3Bsd00001195bc*sc*i* alias: pci:v0000168Cd00000032sv00001A3Bsd00001F86bc*sc*i* alias: pci:v0000168Cd00000032sv00001A3Bsd00001186bc*sc*i* alias: pci:v0000168Cd00000032sv00001B9Asd00002001bc*sc*i* alias: pci:v0000168Cd00000032sv00001B9Asd00002000bc*sc*i* alias: pci:v0000168Cd00000032sv0000144Fsd00007197bc*sc*i* alias: pci:v0000168Cd00000032sv0000105Bsd0000E04Fbc*sc*i* alias: pci:v0000168Cd00000032sv0000105Bsd0000E04Ebc*sc*i* alias: pci:v0000168Cd00000032sv000011ADsd00006628bc*sc*i* alias: pci:v0000168Cd00000032sv000011ADsd00006627bc*sc*i* alias: pci:v0000168Cd00000032sv00001C56sd00004001bc*sc*i* alias: pci:v0000168Cd00000032sv00001A3Bsd00002100bc*sc*i* alias: pci:v0000168Cd00000032sv00001A3Bsd00002C97bc*sc*i* alias: pci:v0000168Cd00000032sv000017AAsd00003219bc*sc*i* alias: pci:v0000168Cd00000032sv000017AAsd00003218bc*sc*i* alias: pci:v0000168Cd00000032sv0000144Dsd0000C708bc*sc*i* alias: pci:v0000168Cd00000032sv0000144Dsd0000C680bc*sc*i* alias: pci:v0000168Cd00000032sv0000144Dsd0000C706bc*sc*i* alias: pci:v0000168Cd00000032sv0000144Dsd0000410Fbc*sc*i* alias: pci:v0000168Cd00000032sv0000144Dsd0000410Ebc*sc*i* alias: pci:v0000168Cd00000032sv0000144Dsd0000410Dbc*sc*i* alias: pci:v0000168Cd00000032sv0000144Dsd00004106bc*sc*i* alias: pci:v0000168Cd00000032sv0000144Dsd00004105bc*sc*i* alias: pci:v0000168Cd00000032sv0000185Fsd00003027bc*sc*i* alias: pci:v0000168Cd00000032sv0000185Fsd00003119bc*sc*i* alias: pci:v0000168Cd00000032sv0000168Csd00003122bc*sc*i* alias: pci:v0000168Cd00000032sv0000168Csd00003119bc*sc*i* alias: pci:v0000168Cd00000032sv0000105Bsd0000E075bc*sc*i* alias: pci:v0000168Cd00000032sv00001A3Bsd00002152bc*sc*i* alias: pci:v0000168Cd00000032sv00001A3Bsd0000126Abc*sc*i* alias: pci:v0000168Cd00000032sv00001A3Bsd00002126bc*sc*i* alias: pci:v0000168Cd00000032sv00001A3Bsd00001237bc*sc*i* alias: pci:v0000168Cd00000032sv00001A3Bsd00002086bc*sc*i* alias: pci:v0000168Cd00000030sv*sd*bc*sc*i* alias: pci:v0000168Cd0000002Esv*sd*bc*sc*i* alias: pci:v0000168Cd0000002Dsv*sd*bc*sc*i* alias: pci:v0000168Cd0000002Csv*sd*bc*sc*i* alias: pci:v0000168Cd0000002Bsv*sd*bc*sc*i* alias: pci:v0000168Cd0000002Bsv00001A3Bsd00002C37bc*sc*i* alias: pci:v0000168Cd0000002Asv000010CFsd00001536bc*sc*i* alias: pci:v0000168Cd0000002Asv000010CFsd0000147Dbc*sc*i* alias: pci:v0000168Cd0000002Asv000010CFsd0000147Cbc*sc*i* alias: pci:v0000168Cd0000002Asv0000185Fsd0000309Dbc*sc*i* alias: pci:v0000168Cd0000002Asv00001A32sd00000306bc*sc*i* alias: pci:v0000168Cd0000002Asv000011ADsd00006642bc*sc*i* alias: pci:v0000168Cd0000002Asv000011ADsd00006632bc*sc*i* alias: pci:v0000168Cd0000002Asv0000105Bsd0000E01Fbc*sc*i* alias: pci:v0000168Cd0000002Asv00001A3Bsd00001C71bc*sc*i* alias: pci:v0000168Cd0000002Asv*sd*bc*sc*i* alias: pci:v0000168Cd00000029sv*sd*bc*sc*i* alias: pci:v0000168Cd00000027sv*sd*bc*sc*i* alias: pci:v0000168Cd00000024sv*sd*bc*sc*i* alias: pci:v0000168Cd00000023sv*sd*bc*sc*i* depends: ath9k_hw,mac80211,ath9k_common,cfg80211,ath intree: Y vermagic: 3.13.0-24-generic SMP mod_unload modversions signer: Magrathea: Glacier signing key sig_key: <MAC address removed>:D9:06:21:70:6E:8D:06:60:4D:73:0B:35:9F:C0 sig_hashalgo: sha512 parm: debug:Debugging mask (uint) parm: nohwcrypt:Disable hardware encryption (int) parm: blink:Enable LED blink on activity (int) parm: btcoex_enable:Enable wifi-BT coexistence (int) parm: bt_ant_diversity:Enable WLAN/BT RX antenna diversity (int) parm: ps_enable:Enable WLAN PowerSave (int) filename: /lib/modules/3.13.0-24-generic/kernel/drivers/net/wireless/ath/ath9k/ath9k_common.ko license: Dual BSD/GPL description: Shared library for Atheros wireless 802.11n LAN cards. author: Atheros Communications srcversion: 696B00A6C59713EC0966997 depends: ath,ath9k_hw intree: Y vermagic: 3.13.0-24-generic SMP mod_unload modversions signer: Magrathea: Glacier signing key sig_key: <MAC address removed>:D9:06:21:70:6E:8D:06:60:4D:73:0B:35:9F:C0 sig_hashalgo: sha512 filename: /lib/modules/3.13.0-24-generic/kernel/drivers/net/wireless/ath/ath9k/ath9k_hw.ko license: Dual BSD/GPL description: Support for Atheros 802.11n wireless LAN cards. author: Atheros Communications srcversion: 4809F3842A0542CD6B556D3 depends: ath intree: Y vermagic: 3.13.0-24-generic SMP mod_unload modversions signer: Magrathea: Glacier signing key sig_key: <MAC address removed>:D9:06:21:70:6E:8D:06:60:4D:73:0B:35:9F:C0 sig_hashalgo: sha512 filename: /lib/modules/3.13.0-24-generic/kernel/drivers/net/wireless/ath/ath.ko license: Dual BSD/GPL description: Shared library for Atheros wireless LAN cards. author: Atheros Communications srcversion: 88A67C5359B02C5A710AFCF depends: cfg80211 intree: Y vermagic: 3.13.0-24-generic SMP mod_unload modversions signer: Magrathea: Glacier signing key sig_key: <MAC address removed>:D9:06:21:70:6E:8D:06:60:4D:73:0B:35:9F:C0 sig_hashalgo: sha512 ##### modules ##### lp rtc ##### blacklist ##### [/etc/modprobe.d/blacklist-ath_pci.conf] blacklist ath_pci [/etc/modprobe.d/blacklist.conf] blacklist evbug blacklist usbmouse blacklist usbkbd blacklist eepro100 blacklist de4x5 blacklist eth1394 blacklist snd_intel8x0m blacklist snd_aw2 blacklist i2c_i801 blacklist prism54 blacklist bcm43xx blacklist garmin_gps blacklist asus_acpi blacklist snd_pcsp blacklist pcspkr blacklist amd76x_edac [/etc/modprobe.d/fbdev-blacklist.conf] blacklist arkfb blacklist aty128fb blacklist atyfb blacklist radeonfb blacklist cirrusfb blacklist cyber2000fb blacklist gx1fb blacklist gxfb blacklist kyrofb blacklist matroxfb_base blacklist mb862xxfb blacklist neofb blacklist nvidiafb blacklist pm2fb blacklist pm3fb blacklist s3fb blacklist savagefb blacklist sisfb blacklist tdfxfb blacklist tridentfb blacklist viafb blacklist vt8623fb ##### udev rules ##### # PCI device 0x1969:0x1090 (alx) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="<MAC address removed>", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0" # PCI device 0x168c:0x0036 (ath9k) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="<MAC address removed>", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="wlan*", NAME="wlan0" ##### dmesg ##### [ 1.707662] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f03) [ 11.918852] ath: phy0: WB335 1-ANT card detected [ 11.918856] ath: phy0: Set BT/WLAN RX diversity capability [ 11.926438] ath: phy0: Enable LNA combining [ 11.928469] ath: phy0: ASPM enabled: 0x42 [ 11.928473] ath: EEPROM regdomain: 0x65 [ 11.928475] ath: EEPROM indicates we should expect a direct regpair map [ 11.928478] ath: Country alpha2 being used: 00 [ 11.928479] ath: Regpair used: 0x65 [ 14.066021] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready ########## wireless info END ############

  Read the article

• Cannot enable wireless on an Intel WifiLink 1000 on an Lenovo Ideapad z570

  - by Brij

  I am using the ubuntu 11.10 on lenovo ideapad z570. My wireless internet is not working. I have ensure that wireless switch is on. Windows 7, wireless works great.However ubuntu 11.10 is not allowing me to enable wireless connection. I have run the following command and here is the status. sudo lshw -class network *-network DISABLED description: Wireless interface product: Centrino Wireless-N 1000 vendor: Intel Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 00 serial: 74:e5:0b:1c:a4:a4 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlagn driverversion=3.0.0-12-generic firmware=39.31.5.1 build 35138 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:42 memory:d0500000-d0501fff *-network description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 05 serial: f0:de:f1:64:b6:62 size: 10Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=rtl_nic/rtl8105e-1.fw latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:41 ioport:2000(size=256) memory:d0404000-d0404fff memory:d0400000-d0403fff Here is rfkill list all output: rfkill list all 0: ideapad_wlan: Wireless LAN Soft blocked: no Hard blocked: no 1: phy0: Wireless LAN Soft blocked: no Hard blocked: no 2: acer-wireless: Wireless LAN Soft blocked: yes Hard blocked: no Note : Windows 7, wireless card property shows that Intel WifiLink 1000 BGN. Could someone help me to fix this issue.

  Read the article

• Running 12.04 as a gateway - resolvconf, dhclient and dnsmasq integration

  - by Adam

  I have a gateway server which is set up originally with Ubuntu desktop 12.04 - perhaps a mistake, I don't know, something to bear in mind. I ripped out network-manager and now want to get resolvconf, dhclient and dnsmasq to play well together. dhclient gets the gateway's eth0 WAN ip address and the ISP DNS name server from the modem. dnsmasq needs to serve dhcp to the rest of the lan on eth1 and acts as a DNS cache both for the lan and for the gateway machine. I also set up iptables as a firewall. Right now, the gateway's /etc/resolv.conf shows only name server = 127.0.0.1 which is correct AFAIK. However I don't think that dhclient is giving dnsmasq the ISP DNS name server nor is dnsmasq picking up the OpenDNS and Google name servers I specified in /etc/network/interfaces - at the moment look-ups, i.e. ping or surfing, don't work unless I manually edit /etc/resolv.conf to put in an upstream name server like 8.8.8.8 So I removed the resolvconf package. Now I'm not getting dhcp on my lan and I'm not able to do DNS look-ups on the host itself - I can surf and ping on the net, but not 127.0.0.1. Where do I go from here? This setup with the config for dhclient and dnsmasq, and the same resolv.conf and hosts files worked on my old debian box.

  Read the article

• two possible wifi devices competing, one is hard blocked - unable to connect wireless

  - by patrickmw

  blacklisted acer_wmi because that was showing up in the rfkill list then ideapad_wlan was listed $ rfkill list wifi 1: ideapad_wlan: Wireless LAN Soft blocked: no Hard blocked: no 3: brcmwl-0: Wireless LAN Soft blocked: no Hard blocked: yes $ lshw -C network *-network description: Ethernet interface product: AR8131 Gigabit Ethernet vendor: Atheros Communications physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: c0 serial: f0:de:f1:12:21:e9 size: 1Gbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI duplex=full firmware=N/A ip=192.168.1.139 latency=0 link=yes multicast=yes port=twisted pair speed=1Gbit/s resources: irq:42 memory:f0400000-f043ffff ioport:2000(size=128) *-network description: Wireless interface product: BCM4313 802.11b/g/n Wireless LAN Controller vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:04:00.0 logical name: eth1 version: 01 serial: ac:81:12:38:ba:89 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.38 latency=0 multicast=yes wireless=IEEE 802.11 resources: irq:17 memory:f0500000-f0503fff contents of /var/lib/NetworkManager/NetworkManager.state [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true I'm not sure how to disable the wifi devices independently. I'm also not sure which device is the correct one. I think its the brcmw device. Any suggestions?

  Read the article

• two possible wifi devices competing, one is hard blocked

  - by patrickmw

  blacklisted acer_wmi because that was showing up in the rfkill list then ideapad_wlan was listed $ rfkill list wifi 1: ideapad_wlan: Wireless LAN Soft blocked: no Hard blocked: no 3: brcmwl-0: Wireless LAN Soft blocked: no Hard blocked: yes $ lshw -C network *-network description: Ethernet interface product: AR8131 Gigabit Ethernet vendor: Atheros Communications physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: c0 serial: f0:de:f1:12:21:e9 size: 1Gbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI duplex=full firmware=N/A ip=192.168.1.139 latency=0 link=yes multicast=yes port=twisted pair speed=1Gbit/s resources: irq:42 memory:f0400000-f043ffff ioport:2000(size=128) *-network description: Wireless interface product: BCM4313 802.11b/g/n Wireless LAN Controller vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:04:00.0 logical name: eth1 version: 01 serial: ac:81:12:38:ba:89 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.38 latency=0 multicast=yes wireless=IEEE 802.11 resources: irq:17 memory:f0500000-f0503fff I'm not sure how to disable the wifi devices independently. I'm also not sure which device is the correct one. I think its the brcmw device. Any suggestions?

  Read the article

• Hardware compatibility on H97 chipset/hardware support

  - by user3238850

  I am aware that there is documentation about compatibility but it is way out dated. I am also aware that there is a hardware compatibility page on Ubuntu website, but that one is focused on the whole box rather than a single piece of hardware. I have some experience with Linux OS, and some experience playing Ubuntu Server in a virtual machine, but never worked on a machine that lives in the real internet. I am building a home server with an Intel H97 chipset motherboard. I have looked at several models and none of them has Linux in the supported OS category. I have the experience of installing Ubuntu Desktop 14.04 on my 4-years-old lap top, and except for some system errors on start up, there is not too much I can complain about, so I guess I should be fine. However, this time I am going to install Ubuntu Server 14.04 on a relatively new piece of hardware(I went to http://linux-drivers.org/ but found nothing really helpful). For example the ASUS motherboard has M.2 socket and Intel LAN I218V chip, the Gigabyte motherboard has two LAN chips(Intel LAN WGI217V and ATHEROS AR8161-BL3A-R). So I really want to make sure everything will work. Usually I would just trust Ubuntu and buy all hardware I need, but basing on my past experience with the Ubuntu Desktop version on my lap top, I am not so convinced. There is an easily noticeable difference: when the system is idle, the fan runs much more frequently and longer under Ubuntu. This leads to my suspicion that generally hardware will have worse support for Ubuntu, which is no surprising at all but enough for me to put this post here. And as far as I know, some Intel CPU features come with software that usually will not run under Linux. Any help, idea or thoughts would be greatly appreciated!

  Read the article

• can't access SAMBA shares on UBUNTU-server from other computers

  - by larand

  Installed UBUNTU-server 12.04 and configured /etc/samba/smb.conf as: #======================= Global Settings ======================= [global] workgroup = HEMMA server string = %h server (Samba, Ubuntu) security = user wins support = yes dns proxy = no log file = /var/log/samba/log.%m max log size = 1000 syslog = 0 panic action = /usr/share/samba/panic-action %d encrypt passwords = no passdb backend = tdbsam obey pam restrictions = yes unix password sync = yes passwd program = /usr/bin/passwd %u passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* . pam password change = yes map to guest = bad user ############ Misc ############ usershare allow guests = yes #======================= Share Definitions ======================= [printers] comment = All Printers browseable = no path = /var/spool/samba printable = yes guest ok = no read only = yes create mask = 0700 # Windows clients look for this share name as a source of downloadable # printer drivers [print$] comment = Printer Drivers path = /var/lib/samba/printers browseable = yes read only = yes guest ok = no [Bilder original] comment = Original bilder path = /mnt/bilder/org browseable = yes read only = no guest ok = no create mask = 0755 [Bilder publika] comment = Bilder för allmän visning path = /mnt/bilder/public browseable = yes read only = yes guest ok = yes [Musik] comment = Musik path = /mnt/music/public browseable = yes read only = yes guest ok = yes I have a network setup around a 4G router "HUAWEI B593" where some computers are connected by WIFI and others by LAN. The server is connected by LAN. On one computer running windows XP I can see the server but are not allowed to acces them. On another computer on the WIFI-net running win7 I cannot see the server at all but I can ping the server and I can see the smb-protocoll is running when sniffing with wireshark. I don't primarily want to use passwords, computers on the lan and wifi should be able to connect without any login-procedure. I'm sure my config is not sufficient but have hard to understand how I should do. Theres a lot of descriptions on the net but most is old and none have been of any help. I'm also confused by the fact that I can not se the sever on my win7-machine even though it communicates with the samba-server. Would be very happy if anyone could spread some light over this mess.

  Read the article

• "Enable Wireless" option is disabled in network settings

  - by silenTK

  I'm using Ubuntu 11.10 (dual booted with Windows 7) but I'm unable to access Internet wireless even though I can do so on Windows 7. The output for rfkill list all is given below: rfkill list all 0: brcmwl-0: Wireless LAN Soft blocked: no Hard blocked: yes 1: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: no The output for sudo lshw -C network *-network DISABLED is: description: Wireless interface product: BCM4313 802.11b/g/n Wireless LAN Controller vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: eth1 version: 01 serial: 11:11:11:11:11:11 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.38 latency=0 multicast=yes wireless=IEEE 802.11 resources: irq:16 memory:c2500000-c2503fff *-network description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 05 serial: 22:22:22:22:22:22 size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8105e-1.fw latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:42 ioport:3000(size=256) memory:c0404000-c0404fff memory:c0400000-c0403fff Broadcom STA wireless driver is installed, activated, and currently in use. My laptop is a HP-Pavilion-g6-1004tx. My hardware switch is on. Enable Wireless option is also disabled in network settings.

  Read the article

• networking without port forwarding

  - by Wallacoloo

  I'm trying to add networking functionality to my game. I want any user to be able to host the game, and anyone to be able to connect as a client. The client sends info to the host about their player's position, etc. When the host receives a message, it validates it and then broadcasts it to its other clients. I will primarily be dealing with UDP, but will also need TCP for chat & lobby stuff. The problem is that I can't seem to get a packet sent from the client to the host or the other way around without enabling port forwarding on my router. But I don't think this is necessary. I believe the reason I need port forwarding is because I want to send a packet from 1 computer on a LAN to another computer on a different LAN, but neither of them have a global ip address since they're in a LAN. So really, I can only send packets targeting the other network's router, which must forward it on to the machine I want to reach. So how can I do this without port forwarding? Somehow a web server can communicate with my computer, which doesn't have a global ip, without port forwarding. And I've played plenty of multi-player games that don't require me to enable port forwarding. So it must be possible. Btw, I'm using SDL_Net. I don't think this will change anything though.

  Read the article

• Weird Network Behavior of Home Router

  - by Stilgar

  First of all I would like to apologize because what you are going to read will be long and confusing but I am fighting this issue for 3 days now and am out of ideas. At home I have the following setup 50Mbps Internet connects into a home router A 2 desktop computers connect to router A via standard FTP LAN cables including one where the cable is ~20m long. a second router B connects to router A via standard FTP LAN cable X (~20m long). several devices connect to the wireless network of router B and there are a couple of desktop computers connected to it through FTP LAN cables. For some reason computers connected to router B when it is connected via cable X have very slow Internet connection. It is like 5 times slower than what is expected. This is the actual problem I am trying to solve. Interesting facts If a computer is connected to cable X directly instead of through router B the Internet speed is just fine (up to the 50Mbps I get from the ISP). Tested with two computers. I have tried replacing router B with another router C and the problem persists. If I connect router B via another cable to the same ports with the same settings everything seems to work fine and computers connected to router B have quite fast Internet I have tested mainly via Speedtest.net but I have also achieved similar speeds when downloading a file The upload speed is quite higher than the download speed in all cases. Note that my ISP usually has higher upload speed (unless it manages to hit the 50Mbps cap) It seems like the speed when connecting through router B with cable X is reduced 4-5 times no matter what the original speed is. For example via router B I get 10Mbps speed to local servers where I get 50Mbps when connected on router A. If I use a distant server where the ISP is only able to provide 25Mbps I get 4-5Mbps on router B. WiFi is slower than LAN on both routers (which is normal) but the reduced speed is reduced proportionally for WiFi. In addition the upload speed is normally higher from the ISP and it is also reduced proportionally. I have tried two different network configurations. One where I have NAT behind NAT where router B connects to router A via the WAN port and has its own DHCP. Second where router B connects to router A via standard LAN port and has DHCP disabled. In this configuration router B serves as a switch and the Network Gateway for computers connected to router B is the internal IP address of router A. Both configurations work just fine but both manifest the reduced speed issue. pings seem to work just fine As far as I can tell none of the cables is crossed The RJ45 setup for cable X orange orange-white brown brow-white blue blue-white green green-white This is a big problem for me since cable X passes through walls and floors and is very hard to replace. I also may have gotten some of the facts wrong because I am almost going crazy with this issue and testing includes going several floors up and down the staircase. One hypothesis I came up with is that the cable is defective in such a way that the voltage from the router affects its performance. When it is connected to a computer it performs just fine but the router has less power. Related hypothesis includes the cable being affected by electricity cables in the walls when the voltage is low. (I know nothing about electricity) So any ideas what to do, what to test or what the issue may be?

  Read the article

• Can't get IPv6 address using radvd on wireless interface on windows, wired works fine.

  - by AndrejaKo

  I set up my router to use OpenWRT and set it up to use IPv6 using a tunnel form SixXs. I'm having problems with stateless autoconfiguration using radvd. On my computer, wired connection can get its IPv6 address fine, but wireless can't. After spending some time on OpenWRT forums, I'm pretty much sure now that router is set up fine and that the problem is with my windows settings. Also, I do not have any problems getting IPv6 address on openSUSE 11.3. So what should I do to solve this and what information should I post? Here's radvdump output for wired interface: interface br-lan { AdvSendAdvert on; # Note: {Min,Max}RtrAdvInterval cannot be obtained with radvdump AdvManagedFlag on; AdvOtherConfigFlag on; AdvReachableTime 0; AdvRetransTimer 0; AdvCurHopLimit 64; AdvDefaultLifetime 1800; AdvHomeAgentFlag off; AdvDefaultPreference medium; AdvSourceLLAddress on; prefix 2001:15c0:67d0::/64 { AdvValidLifetime 86400; AdvPreferredLifetime 14400; AdvOnLink on; AdvAutonomous on; AdvRouterAddr off; }; # End of prefix definition }; # End of interface definition Here's radvdump output for wireless interface: # # radvd configuration generated by radvdump 1.6 # based on Router Advertisement from fe80::a0b7:deff:fef0:5b34 # received by interface br-lan # interface br-lan { AdvSendAdvert on; # Note: {Min,Max}RtrAdvInterval cannot be obtained with radvdump AdvManagedFlag on; AdvOtherConfigFlag on; AdvReachableTime 0; AdvRetransTimer 0; AdvCurHopLimit 64; AdvDefaultLifetime 1800; AdvHomeAgentFlag off; AdvDefaultPreference medium; AdvSourceLLAddress on; prefix 2001:15c0:67d0::/64 { AdvValidLifetime 86400; AdvPreferredLifetime 14400; AdvOnLink on; AdvAutonomous on; AdvRouterAddr off; }; # End of prefix definition }; # End of interface definition # # radvd configuration generated by radvdump 1.6 # based on Router Advertisement from fe80::a0b7:deff:fef0:5b34 # received by interface br-lan # interface br-lan { AdvSendAdvert on; # Note: {Min,Max}RtrAdvInterval cannot be obtained with radvdump AdvManagedFlag on; AdvOtherConfigFlag on; AdvReachableTime 0; AdvRetransTimer 0; AdvCurHopLimit 64; AdvDefaultLifetime 1800; AdvHomeAgentFlag off; AdvDefaultPreference medium; AdvSourceLLAddress on; prefix 2001:15c0:67d0::/64 { AdvValidLifetime 86400; AdvPreferredLifetime 14400; AdvOnLink on; AdvAutonomous on; AdvRouterAddr off; }; # End of prefix definition }; # End of interface definition

  Read the article

• how to remove obsolete device and network entries? Device manager "uninstall" option has no effect

  - by Gizmo

  I am trying to remove a few "obsolete" things which annoy me (because I like to have everything cleen, working and not interferring with each other, fresh, etc..). I tried looking for solutions without any help, so here I am to ask. My first part is about removing obsolete networks, let me explain by showing the ipconfig output: C:\windows\system32>ipconfig Windows IP Configuration Wireless LAN adapter Local Area Connection* 11: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Wireless LAN adapter Local Area Connection* 9: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Ethernet adapter LAN: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Wireless LAN adapter Wi-Fi: Connection-specific DNS Suffix . : home Link-local IPv6 Address . . . . . : fe80::c129:8d57:bbd1:3564%10 IPv4 Address. . . . . . . . . . . : 192.168.2.1 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.2.254 Tunnel adapter isatap.home: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : home C:\windows\system32> Specificalyy the first two adapter entries annoy me because the adapters are not visible in the network connection menu (invisible folder / file visibility set to "show"): And here is the second problem altogether with the first one: No matter what I click/do, Uninstall option has no effect on the multiplexor driver. (bridging stuff, right?) I really want to remove the Wireless LAN adapter Local Area Connection entries and the adapter multiplexor stuff but it's impossible? Why is this? How can I remove them anyway?

  Read the article

• Create a VPN with Python

  - by user213060

  I want to make a device "tunnel box" that you plug an input ethernet line, and an output ethernet line, and all the traffic that goes through it gets modified in a special way. This is similar to how a firewall, IDS, VPN, or similar boxes are connected inline in a network. I think you can just assume that I am writing a custom VPN in Python for the purpose of this question: LAN computer <--\ LAN computer <---> [LAN switch] <--> ["tunnel box"] <--> [internet modem] <--> LAN computer <--/ My question is, what is a good way to program this "tunnel box" from python? My application needs to see TCP flows at the network layer, not as individual ethernet frames. Non-TCP/IP traffic such as ICPM and other types should just be passed through. Example Twisted-like Code for my "tunnel box" tunnel appliance: from my_code import special_data_conversion_function class StreamInterceptor(twisted.Protocol): def dataReceived(self,data): data=special_data_conversion_function(data) self.outbound_connection.send(data) My initial guesses: TUN/TAP with twisted.pair.tuntap.py - Problem: This seems to only work at the ethernet frame level, not like my example? Socks proxy - Problem: Not transparent as in my diagram. Programs have to be specifically setup for it. Thanks!

  Read the article

• SOLVED Install MythTV & 11.10 on Lenovo S12 (Intel atom) with wireless

  - by keepitsimpleengineer

  This is how I installed Ubuntu 11.10 and MythTV client on my Lenovo S12 (Intel Atom) laptop and use it using WiFi (see additional notes at end). I did this because the upgrade from 11.04 bricked the laptop. Note that the partitions on the Lenovo standard disk were already in place for this installation. Also note that my LAN is setup for fixed IP addresses. Downloaded and burned 11.10 x86 Desktop Ubuntu CD Connected the power supply cord, LAN wire and the external DVD USB drive. Ran Windows XP and made sure performance level "Performance" was set and "Wireless" was enabled. Booted S12 from CD Disabled Networking from icon on upper left panel icon Edited Connections… "Wired connection 1" ? Set IP address, accepted default netmask and set gateway. Also set DNS server. Good idea to check "Connection Information" here to verify everything's O.K. Selected Install Ubuntu from the initial "Install" window Verified the three items were checked (required disk space available, plugged into a power source, & connected to the Internet) Selected Download updates while installing and third party software. Hit Continue… At wireless selected don't want to connect…WiFi…now. Continue… At Installation type, selected Something else. Continue… At partition tale, selected the ext4 Linux partition, set the mount point as "/", and marked for formatting. Here I selected the main disk (/sda) for installing the boot manager. Continue… Selected or verified my Time zone. Continue… Selected my keyboard layout. Continue… Filled in the who are you fields. Make sure password is required to sign in is checked. Continue… Chose a picture. Continue… I selected import no accounts. Continue… Wait as the Install creeps along. If your screen goes blank, tap the space bar ? apparently the screen saver/power plan does this. There are several progress bars. The longest was "Installing system", and it was the next to the last one. Installation Complete window appears, Restart Now… Wait as it stops, The screen blanks then the message "…remove…media…close tray…press enter" I just unplugged the USB DVD and hit enter… It was disheartening but the screen turned Ubuntu Purple-beige and nothing happened, so I help down the power key until it shut down, the pressed it again and the Grub Boot screen appeared. Select Ubuntu… 25.The screen went blank with the little flashing underscore cursor on it and the disk light would occasionally flash. I hit the enter key and eventuality Ubuntu started. After a somewhat long time the unity desktop appeared. 11.10, unlike earlier versions, retains the connection information. Check this by checking the network icon on the upper left applet panel. Here the touch-pad·mouse quit working and I had to reboot. It takes and extremely long time to boot, sometimes requiring several power off/ power on (cold boot). You can try to get the default network manager to work, but it might not, it didn't on mine for WiFi. Thanks to: Chris at URL here's what to do… disconnect your wired Internet connection. input your wireless information into network manager open a terminal (unity dash, top of icon totem, open, and make sure the ruler&pen icon on the bottom is selected, 2nd from left) type in "terminal". Might be a good idea to drag and drop the terminal icon to the terminal, it's easy to get rid of later. click to open a terminal, and type in: sudo rmmod acer_wmi && echo "blacklist acer_wmi" >> /etc/modprobe.d/blacklist.conf and hit enter. type in your password as asked. if you have correctly entered your WiFi information and you are near your AP, you should connect immediately if not, see the URL above ? you might need to replace "network manager" with "wicd" ? I did with 11.04. Update the new 11.10, in the upper left panel applet weird·gear icon is menu with a line about updating. It's the new way to invoke Update Manager. Your lenovo S12 (intel atom) should now run the new unity Ubuntu. Point your elbow at the ceiling and pat yourself on the back. Installing Mythbuntu Client 24.1 Open mythbuntu.org/repos (I urge you not to directly use Ubuntu Software Center for this) Install Mythbuntu Repos Save the file (in ~/Downloads, the default) Run the file ? it will update your repositories so that you will get the proper installation sources ? it will start Ubuntu Software Center to do this ? Click Install… You will need your password. Debconf window will open, select by making sure check mark is in the little box "Would you like to activate…". Forward… Which version? At the time of writing the current "Stable" version was 24.1, select 0.24.x… Forward… Read the message, then forward… Delete the downloaded file. Install synaptic (unity dash, top of icon totem, open, and make sure the ruler&pen icon on the bottom is selected, 2nd from left) type in "synaptic". Click on the synaptic icon. Ubuntu Software Center will open and allow you to install synaptic package manager. Open Synaptic (unity dash, top of icon totem, open, and make sure the ruler&pen icon on the bottom is selected, 2nd from left) type in "Synaptic". Might be a good idea to drag and drop the terminal icon to the terminal, it's easy to get rid of later. Run synaptic, read the intro, and close the intro window. Type in mythbuntu-control-centre in the Quick filter text box, and then select it "Mark for installation" by clicking on the box next to it's name. Marvel at the additional to be installed items, then select "?Mark"… At the top of the synaptic window click on the "? Apply" button. Marvel at the amount of stuff to be installed, the click on "Apply". When finished, close finished window and synaptic. Open mythbuntu-control-centre (unity dash, top of icon totem, open, and make sure the ruler&pen icon on the bottom is selected, 2nd from left) type in "mythbuntu". Might be a good idea to drag and drop the mythbuntu-control-centre icon to the terminal, it's easy to get rid of later. You can now configure and install the frontend. Go down the icon totem on the right side of the window and click as needed… System roles. ? No Backend, Desktop Frontend, and Ubuntu Desktop. Apply… & Apply changes… & Password… MySQL Configuration ? from backend ? Setup General Alt-N(ext) Alt-N(ext) Stetting Access Setup PIN code: ~~~~ Input Security key and click "Test Connection", if ?, then Apply… & Apply… {note: for some inexplicable reason, control centre hung on this, but when I restarted it, it was set properly} Graphics drivers, When I did this, only the Broadcom wireless driver showed up. I closed without doing anything. Services. I enabled SSH & Samba. Apply… & Apply… Repositories. Asked & Answered. MythExport. Pass, I believe it requires backend on the same system. Proprietary Codec Support. Check to enable, Apply… & Apply… System Updates. No action necessary, will be a part of the Ubuntu update mechanism. Themes and Artwork. For themes, I selected Enable/Update all. Apply… & Apply… Infrared & Startup behavior and Plugins. Defer until you know more. Close software centre. Open mythTV (unity dash, top of icon totem, open, and make sure the ruler&pen icon on the bottom is selected, 2nd from left) type in "mythTV". Might be a good idea to drag and drop the mythTV icon to the terminal, it's easy to get rid of later. Incorrect Group Membership. Fix this by clicking "Yes"… Log out/end. Do this by clicking "Yes"… For my Lenovo S12, I had to manually restart Ubuntu - and still with the very long restart…/no start/cold boot/reboot/pressing the shift key required Open mythTV (unity dash, top of icon totem, open, and make sure the ruler&pen icon on the bottom is selected, 2nd from left) type in "mythTV". Might be a good idea to drag and drop the mythTV icon to the terminal, it's easy to get rid of later. Will open with Select country & language. Do so. then get message with "No", hit "Ok" and arrive at the data base Configuration 1/2 screen. You will need your brackend password, from backend ? Setup General Database Configuration 1/2 Password:~? Enter this Hit Alt-n to go to the next page. Select "Use custom id…", then enter a custom ID, I use the machine's name. Hit finish, and MythTV should start up with all default settings. For the lenovo S12, the first thing you want to do is to set Playback profiles to "Normal". From Setup TV Settings Playback Alt-N(ext) Alt-N(ext) Playback Profiles (3/8) : Change Current Video Playback Profile to "Normal". You can fiddle with this setting later. For the lenovo S12, the second thing is to get the sound going. From Setup General Alt-N(ext) Alt-N(ext) Alt-N(ext) Audio System: The top of the screen is a button title "Scan for audio devices", move the highlight there and press the Space bar. Then Tab down to Audio Output Device: and left-right arrow until "ALSA:hw:Card=Intel,DEV=0" is selected. Then Alt-N(ext) until "Finish". Now you should have sound. You should now have MythTV working nicely on the Lenovo S12 Notes about wireless: Running Lenovo S12 on wireless is demanding on both power and WiFi connection. Best results will be obtained when running on power and wired connection. I run my S12 on wireless, actually two serial connections with two access points, something that is not easy to achieve. Here Mythbuntu client-server (in den) <? wireless link 1 <?office LAN? wireless link 2 <? Lenovo S12 Ubuntu 11.10 The office LAN is fixed IP behind an Untangle firewall router. There is another MythTV client on Ubuntu 10.10 computer in the office (which has always worked well). ProblemMythbuntu\Win7 client hangs with frozen frames, short segment of audio repeating. Hardware Rosewill RNX-G300EX IEEE 802.11b/g PCI Wireless Card on client-server 2 Linksys WRT54GL wireless broadband routers on LAN for link1 and link 2 WRT54GL FirmwareDD-WRT v24-sp2(07/22/09) voip set up to act as an access point. Note? many people advised this was an unworkable scheme, and in probably most cases it will be. Solution? Set up DD-WRT with the following Wireless settings… Basic Channel: Different fixed channels at least 4 difference, I use 6 & 11 Basic Sensitivity Range (ACK timing): 50 MAC filter use filter: Enable, Selected Permit only clients listed to access… Requires adding MAC addresses in "Edit MAC Filter List" This causes the 54GL's to ignore any but the listed MAC address, down side, no "guest" capability. Advanced Basic rate: All Advanced CTS Protection Mode: Off Advanced Frame Burst: Enable Advanced Max associate clients: 4 for client link 2, 1 for client-server link 1 Advanced AP isolation: Enable Advanced Preamble: Short Advanced Afterburner: On Advanced Wireless GUI access: Off Advanced WMM support: Off Other settings: default for supplied firmware. Why I suspect this worked? The 54GL Access Points's with the firmware's setting are set to handle a multiple client, wide area situation. With these mods I reconfigured them for a small area, few client situation, disabling Advanced WMM probably the most important. In addition, the client mythtv when used all other users of its access point are turned off except for a Skype phone. Also, the client-server is set up to allow other connections though it's LAN connection, and these are used to connect the TV and disc players, not used when client is being used.

  Read the article

• Wireless Connected But No Internet Connection (Ubuntu 12.04)

  - by Zxy

  I am using same network for 2 days and everything was normal. However, today even though it shows me as connected to the network, I do not have internet connection. If I use ethernet cable instead of wireless, I am still able to connect to the internet. Also my friends are able to connect to the wireless network and they can get internet connection. I did not update or install anything since yesterday. Therefore I do not have any idea why it is happening. Here is some information about my connection: I will be appreciate to any kind of help. root@ghostrider:/etc/resolvconf# ping 127.0.0.1 PING 127.0.0.1 (127.0.0.1) 56(84) bytes of data. 64 bytes from 127.0.0.1: icmp_req=1 ttl=64 time=0.042 ms 64 bytes from 127.0.0.1: icmp_req=2 ttl=64 time=0.023 ms 64 bytes from 127.0.0.1: icmp_req=3 ttl=64 time=0.036 ms 64 bytes from 127.0.0.1: icmp_req=4 ttl=64 time=0.040 ms ^C --- 127.0.0.1 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 2998ms rtt min/avg/max/mdev = 0.023/0.035/0.042/0.008 ms root@ghostrider:/etc/resolvconf# ping 192.168.1.3 PING 192.168.1.3 (192.168.1.3) 56(84) bytes of data. ^C --- 192.168.1.3 ping statistics --- 19 packets transmitted, 0 received, 100% packet loss, time 18143ms root@ghostrider:/etc/resolvconf# ping 8.8.8.8 PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data. ^C --- 8.8.8.8 ping statistics --- 11 packets transmitted, 0 received, 100% packet loss, time 10079ms root@ghostrider:/etc/resolvconf# cat /etc/lsb-release; uname -a DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION="Ubuntu 12.04 LTS" Linux ghostrider 3.2.0-24-generic-pae #39-Ubuntu SMP Mon May 21 18:54:21 UTC 2012 i686 i686 i386 GNU/Linux root@ghostrider:/etc/resolvconf# lspci -nnk | grep -iA2 net 03:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR8131 Gigabit Ethernet [1969:1063] (rev c0) Subsystem: Lenovo Device [17aa:3956] Kernel driver in use: atl1c -- 04:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01) Subsystem: Broadcom Corporation Device [14e4:0510] Kernel driver in use: wl root@ghostrider:/etc/resolvconf# lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 007: ID 0489:e00d Foxconn / Hon Hai Bus 001 Device 004: ID 1c7a:0801 LighTuning Technology Inc. Fingerprint Reader Bus 001 Device 005: ID 064e:f219 Suyin Corp. Bus 002 Device 010: ID 0424:2412 Standard Microsystems Corp. Bus 002 Device 004: ID 046d:c52b Logitech, Inc. Unifying Receiver Bus 002 Device 011: ID 0403:6010 Future Technology Devices International, Ltd FT2232C Dual USB-UART/FIFO IC root@ghostrider:/etc/resolvconf# iwconfig lo no wireless extensions. eth1 IEEE 802.11 ESSID:"PoliTekno" Mode:Managed Frequency:2.462 GHz Access Point: 00:16:E3:40:C3:E4 Bit Rate=54 Mb/s Tx-Power:24 dBm Retry min limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=5/5 Signal level=-52 dBm Noise level=-97 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 eth0 no wireless extensions. root@ghostrider:/etc/resolvconf# rfkill list all 0: brcmwl-0: Wireless LAN Soft blocked: no Hard blocked: no 1: ideapad_wlan: Wireless LAN Soft blocked: no Hard blocked: no 2: ideapad_bluetooth: Bluetooth Soft blocked: no Hard blocked: no 5: hci0: Bluetooth Soft blocked: no Hard blocked: no root@ghostrider:/etc/resolvconf# lsmod Module Size Used by nls_iso8859_1 12617 0 nls_cp437 12751 0 vfat 17308 0 fat 55605 1 vfat usb_storage 39646 0 uas 17828 0 snd_hda_codec_realtek 174055 1 rfcomm 38139 12 parport_pc 32114 0 ppdev 12849 0 bnep 17830 2 joydev 17393 0 ftdi_sio 35859 1 usbserial 37173 3 ftdi_sio snd_hda_intel 32765 3 snd_hda_codec 109562 2 snd_hda_codec_realtek,snd_hda_intel snd_hwdep 13276 1 snd_hda_codec acer_wmi 23612 0 hid_logitech_dj 18177 0 snd_pcm 80845 2 snd_hda_intel,snd_hda_codec uvcvideo 67203 0 btusb 17912 2 snd_seq_midi 13132 0 videodev 86588 1 uvcvideo bluetooth 158438 23 rfcomm,bnep,btusb psmouse 72919 0 usbhid 41906 1 hid_logitech_dj snd_rawmidi 25424 1 snd_seq_midi intel_ips 17753 0 serio_raw 13027 0 root@ghostrider:/etc/resolvconf# ping 127.0.0.1 PING 127.0.0.1 (127.0.0.1) 56(84) bytes of data. 64 bytes from 127.0.0.1: icmp_req=1 ttl=64 time=0.042 ms 64 bytes from 127.0.0.1: icmp_req=2 ttl=64 time=0.023 ms 64 bytes from 127.0.0.1: icmp_req=3 ttl=64 time=0.036 ms 64 bytes from 127.0.0.1: icmp_req=4 ttl=64 time=0.040 ms ^C --- 127.0.0.1 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 2998ms rtt min/avg/max/mdev = 0.023/0.035/0.042/0.008 ms root@ghostrider:/etc/resolvconf# ping 192.168.1.3 PING 192.168.1.3 (192.168.1.3) 56(84) bytes of data. ^C --- 192.168.1.3 ping statistics --- 19 packets transmitted, 0 received, 100% packet loss, time 18143ms root@ghostrider:/etc/resolvconf# ping 8.8.8.8 PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data. ^C --- 8.8.8.8 ping statistics --- 11 packets transmitted, 0 received, 100% packet loss, time 10079ms root@ghostrider:/etc/resolvconf# cat /etc/lsb-release; uname -a DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION="Ubuntu 12.04 LTS" Linux ghostrider 3.2.0-24-generic-pae #39-Ubuntu SMP Mon May 21 18:54:21 UTC 2012 i686 i686 i386 GNU/Linux root@ghostrider:/etc/resolvconf# lspci -nnk | grep -iA2 net 03:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR8131 Gigabit Ethernet [1969:1063] (rev c0) Subsystem: Lenovo Device [17aa:3956] Kernel driver in use: atl1c -- 04:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01) Subsystem: Broadcom Corporation Device [14e4:0510] Kernel driver in use: wl root@ghostrider:/etc/resolvconf# lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 007: ID 0489:e00d Foxconn / Hon Hai Bus 001 Device 004: ID 1c7a:0801 LighTuning Technology Inc. Fingerprint Reader Bus 001 Device 005: ID 064e:f219 Suyin Corp. Bus 002 Device 010: ID 0424:2412 Standard Microsystems Corp. Bus 002 Device 004: ID 046d:c52b Logitech, Inc. Unifying Receiver Bus 002 Device 011: ID 0403:6010 Future Technology Devices International, Ltd FT2232C Dual USB-UART/FIFO IC root@ghostrider:/etc/resolvconf# iwconfig lo no wireless extensions. eth1 IEEE 802.11 ESSID:"PoliTekno" Mode:Managed Frequency:2.462 GHz Access Point: 00:16:E3:40:C3:E4 Bit Rate=54 Mb/s Tx-Power:24 dBm Retry min limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=5/5 Signal level=-52 dBm Noise level=-97 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 eth0 no wireless extensions. root@ghostrider:/etc/resolvconf# rfkill list all 0: brcmwl-0: Wireless LAN Soft blocked: no Hard blocked: no 1: ideapad_wlan: Wireless LAN Soft blocked: no Hard blocked: no 2: ideapad_bluetooth: Bluetooth Soft blocked: no Hard blocked: no 5: hci0: Bluetooth Soft blocked: no Hard blocked: no root@ghostrider:/etc/resolvconf# lsmod Module Size Used by nls_iso8859_1 12617 0 nls_cp437 12751 0 vfat 17308 0 fat 55605 1 vfat usb_storage 39646 0 uas 17828 0 snd_hda_codec_realtek 174055 1 rfcomm 38139 12 parport_pc 32114 0 ppdev 12849 0 bnep 17830 2 joydev 17393 0 ftdi_sio 35859 1 usbserial 37173 3 ftdi_sio snd_hda_intel 32765 3 snd_hda_codec 109562 2 snd_hda_codec_realtek,snd_hda_intel snd_hwdep 13276 1 snd_hda_codec acer_wmi 23612 0 hid_logitech_dj 18177 0 snd_pcm 80845 2 snd_hda_intel,snd_hda_codec uvcvideo 67203 0 btusb 17912 2 snd_seq_midi 13132 0 videodev 86588 1 uvcvideo bluetooth 158438 23 rfcomm,bnep,btusb psmouse 72919 0 usbhid 41906 1 hid_logitech_dj snd_rawmidi 25424 1 snd_seq_midi intel_ips 17753 0 serio_raw 13027 0 hid 77367 2 hid_logitech_dj,usbhid ideapad_laptop 17890 0 sparse_keymap 13658 2 acer_wmi,ideapad_laptop lib80211_crypt_tkip 17275 0 snd_seq_midi_event 14475 1 snd_seq_midi snd_seq 51567 2 snd_seq_midi,snd_seq_midi_event wl 2646601 0 wmi 18744 1 acer_wmi i915 414672 3 drm_kms_helper 45466 1 i915 snd_timer 28931 2 snd_pcm,snd_seq mac_hid 13077 0 snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq lib80211 14040 2 lib80211_crypt_tkip,wl drm 197692 4 i915,drm_kms_helper i2c_algo_bit 13199 1 i915 snd 62064 15 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_se q,snd_timer,snd_seq_device video 19068 1 i915 mei 36570 0 soundcore 14635 1 snd snd_page_alloc 14108 2 snd_hda_intel,snd_pcm lp 17455 0 parport 40930 3 parport_pc,ppdev,lp atl1c 36718 0 root@ghostrider:/etc/resolvconf# nm-tool NetworkManager Tool State: connected (global) - Device: eth1 [PoliTekno] ---------------------------------------------------- Type: 802.11 WiFi Driver: wl State: connected Default: yes HW Address: AC:81:12:7F:6B:B2 Capabilities: Speed: 54 Mb/s Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes Wireless Access Points (* = current AP) CnDStudios: Infra, 00:12:BF:3F:0A:8A, Freq 2412 MHz, Rate 54 Mb/s, Strength 85 WPA AIR_TIES: Infra, 00:1C:A8:6E:84:32, Freq 2462 MHz, Rate 54 Mb/s, Strength 72 WPA2 VKSS: Infra, 00:E0:4D:01:0D:47, Freq 2452 MHz, Rate 54 Mb/s, Strength 62 WPA2 PROGEDA: Infra, 00:1A:2A:60:BF:61, Freq 2462 MHz, Rate 54 Mb/s, Strength 47 WPA MobilAtolye: Infra, 72:2B:C1:65:75:3C, Freq 2422 MHz, Rate 54 Mb/s, Strength 35 WPA WPA2 AIRTIES_WAR-141: Infra, 00:1C:A8:AB:AA:48, Freq 2422 MHz, Rate 54 Mb/s, Strength 35 WPA WPA2 tilda_biri_yeni: Infra, 54:E6:FC:B0:3C:E9, Freq 2437 MHz, Rate 0 Mb/s, Strength 34 WEP *PoliTekno: Infra, 00:16:E3:40:C3:E4, Freq 2462 MHz, Rate 54 Mb/s, Strength 100 WPA2 AIRTIES_RJY: Infra, 00:1A:2A:BD:85:16, Freq 2462 MHz, Rate 54 Mb/s, Strength 55 WEP IPv4 Settings: Address: 0.0.0.0 Prefix: 24 (255.255.255.0) Gateway: 192.168.1.1 DNS: 192.168.1.1 - Device: eth0 ----------------------------------------------------------------- Type: Wired Driver: atl1c State: unavailable Default: no HW Address: F0:DE:F1:6C:90:65 Capabilities: Carrier Detect: yes Speed: 100 Mb/s Wired Properties Carrier: off root@ghostrider:/etc/resolvconf# sudo iwlist scan lo Interface doesn't support scanning. eth1 Scan completed : Cell 01 - Address: 00:16:E3:40:C3:E4 ESSID:"PoliTekno" Mode:Managed Frequency:2.462 GHz (Channel 11) Quality:5/5 Signal level:-48 dBm Noise level:-98 dBm IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : CCMP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s 24 Mb/s; 36 Mb/s; 54 Mb/s; 6 Mb/s; 9 Mb/s 12 Mb/s; 48 Mb/s Cell 02 - Address: 00:E0:4D:01:0D:47 ESSID:"VKSS" Mode:Managed Frequency:2.452 GHz (Channel 9) Quality:4/5 Signal level:-64 dBm Noise level:-98 dBm IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : CCMP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s 48 Mb/s; 54 Mb/s Cell 03 - Address: 00:1C:A8:AB:AA:48 ESSID:"AIRTIES_WAR-141" Mode:Managed Frequency:2.422 GHz (Channel 3) Quality:2/5 Signal level:-77 dBm Noise level:-95 dBm IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK IE: Unknown: DDB20050F204104A0001101049001E007FC5100018DE7CF0D8B70223A62711C18926AC290E30303030303139631044000102103B0001031047001076B31BC241E953CB99C3872554425A28102100194169725469657320576972656C657373204E6574776F726B73102300074169723534343010240008312E322E302E31321042000F4154303939313131383030323832351054000800060050F20400011011000741697235343430100800020084103C000103 IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s 24 Mb/s; 36 Mb/s; 54 Mb/s; 6 Mb/s; 9 Mb/s 12 Mb/s; 48 Mb/s Cell 04 - Address: 72:2B:C1:65:75:3C ESSID:"MobilAtolye" Mode:Managed Frequency:2.422 GHz (Channel 3) Quality:2/5 Signal level:-78 dBm Noise level:-92 dBm IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : TKIP CCMP Authentication Suites (1) : PSK IE: Unknown: DDA20050F204104A0001101044000102103B00010310470010BC329E001DD811B28601722BC165753C1021001D48756177656920546563686E6F6C6F6769657320436F2E2C204C74642E1023001C48756177656920576972656C6573732041636365737320506F696E74102400065254323836301042000831323334353637381054000800060050F204000110110009487561776569415053100800020084103C000100 IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : TKIP CCMP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 9 Mb/s 18 Mb/s; 36 Mb/s; 54 Mb/s; 6 Mb/s; 12 Mb/s 24 Mb/s; 48 Mb/s Cell 05 - Address: 00:12:BF:3F:0A:8A ESSID:"CnDStudios" Mode:Managed Frequency:2.412 GHz (Channel 1) Quality:5/5 Signal level:-47 dBm Noise level:-95 dBm IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : TKIP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 22 Mb/s 6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s 36 Mb/s; 48 Mb/s; 54 Mb/s Cell 06 - Address: 00:1C:A8:6E:84:32 ESSID:"AIR_TIES" Mode:Managed Frequency:2.462 GHz (Channel 11) Quality:5/5 Signal level:-56 dBm Noise level:-98 dBm IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : CCMP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 22 Mb/s 6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s 36 Mb/s; 48 Mb/s; 54 Mb/s Cell 07 - Address: 54:E6:FC:B0:3C:E9 ESSID:"tilda_biri_yeni" Mode:Managed Frequency:2.437 GHz (Channel 6) Quality:1/5 Signal level:-85 dBm Noise level:-99 dBm Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s 12 Mb/s; 24 Mb/s; 36 Mb/s; 9 Mb/s; 18 Mb/s 48 Mb/s; 54 Mb/s Cell 08 - Address: 18:28:61:16:57:C3 ESSID:"obilet" Mode:Managed Frequency:2.437 GHz (Channel 6) Quality:1/5 Signal level:-88 dBm Noise level:-99 dBm IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s 24 Mb/s; 36 Mb/s; 54 Mb/s; 6 Mb/s; 9 Mb/s 12 Mb/s; 48 Mb/s Cell 09 - Address: 00:1A:2A:60:BF:61 ESSID:"PROGEDA" Mode:Managed Frequency:2.462 GHz (Channel 11) Quality:2/5 Signal level:-75 dBm Noise level:-98 dBm IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : TKIP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 22 Mb/s 6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s 36 Mb/s; 48 Mb/s; 54 Mb/s eth0 Interface doesn't support scanning.

  Read the article

• Navision 4 sp3 start very slow at terminal server (but when start work quick)

  - by Alexander Pavluchenko

  i have follow configuration: LAN, Windows 2003 Terminal Server App Mode, Navision Client at TS, (w2003 32 bit), SQL 2005 (database Navision 4 sp3) (w2003 64bit) i LAN (from Desktop) Nav work fine, if i logon to TS, when open Navision== some times wait 3-5 min. could you advice with way i should think for resolve slow opening Nav problem?

  Read the article

• Is that possible to share pc speaker among PC over ethernet?

  - by Chau Chee Yang

  I have few PC in same LAN. Only one PC has speaker. I want to play music from another PC but I want the sound to play out on the only PC that only has speaker via LAN. Is that possible to do so?

  Read the article

< Previous Page | 29 30 31 32 33 34 35 36 37 38 39 40  | Next Page >