Search Results

Search found 1236 results on 50 pages for 'nat ryall'.

Page 33/50 | < Previous Page | 29 30 31 32 33 34 35 36 37 38 39 40  | Next Page >

• VPN to Buffalo WHR-HP-G300N produces a Connection Error 807

  - by Darius

  My friend has modem/router from Clear and I have sent him Buffalo router to put it between his Clear device and the Network. I walked him thru establishing VPN in DD-WRT but when I try to VPN I get a VPN Connection Error 807. I am out of ideas how to solve this. Any suggestion? Clear Modem WAN: xx.xx.xx.xx Clearn Modem NAT's to: 192.168.15.XXX Clear Modem DHCP: 192.168.15.2 - 192.168.15.2 (range is limited to that of ONE ip address) Clear Modem DMZ: 192.168.15.2 the LAN of the clear modem is 192.168.15.XXX The DD-WRT IP: 192.168.4.1 Port FWD: 1723 to 192.168.4.1 PPTP server listens on 192.168.4.1 Where is the problem with this setup?

  Read the article

• VirtualBox networking problem, host XP, guest Debian

  - by Silma

  Hi, I'm trying to set up a development environment in a virtual machine on my laptop, with debian os. I have both lan and wlan available on the host machine, yet I can't connect to the internet using either. As I said the host OS is windows XP and the guest OS will be the latest Debian, we downloaded the business card net install so we need internet access from the beginning, besides we need the virtual machine to be visible on the local network (for my fellow developers). We tried host-only networking, NAT, bridging, with proxy (the local network uses a proxy to connect to the internet) and without proxy, nothing seems to work. What else can we do? Thanks a lot.

  Read the article

• Connecting Small business network to Azure Site to Site VPN

  - by MarkKGreenway

  Would like to have connectivity between azure virtual machines and on LAN users. My current network has a Cisco ISA550 connected to the WAN (one Ethernet cable into the office the fiber transceiver is on a different floor)and any public servers can be one-to one NAT-ed to have a public and private IP. What is the best way to get a reliable connection. Between end users and the cloud? I want to know the preferred on site endpoint. Do the azure vm's have to have a local ip in the LAN subnet? (Right now 10.10.0.0/20 or 255.255.240.0 to give room if this is the case). If in purchased an asa550 would I put it behind or in front of the isa550. Would it be ahead or peer with the users switches? What is the best way to get a reliable connection. Between end users and the cloud servers?

  Read the article

• Gre tunnel Linux Cisco

  - by mezgani

  I've created a GRE tunnel between LAN A and LAN B. LAN A is behind a router, and LAN B is behind a Linux box and this box has a pppoe interface. When i do tcpdump on Linux box i see that the traffic is routerd to Linux box (tunnel end), so my need is routing the tunnel traffic to internet. I've added these rules to my iptables script, and i stay unable to connect to internet from LAN A Permitting Linux to act as router (necessary to forward packets) echo "1" /proc/sys/net/ipv4/ip_forward iptables -A INPUT -p 47 -j ACCEPT iptables -A FORWARD -i ppp0 -j ACCEPT iptables -A FORWARD -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -t nat -A POSTROUTING -o gre0 -j MASEQUARADE What i've forgot to set in this case?

  Read the article

• Centos iptables blocks after reboot

  - by bilal

  I have a Centos5 installation with kvm on my server. I am using nat portforwarding to ssh my virtual machines. I have several iptables rules and saved then in /etc/sysconfig/iptables. After reboot, I see all these rules when I type service iptables status but I am getting a connection refused error. After typing service iptables restart everything works. I don't understand, why do I need to restart iptables again? Doesn't it restart on reboot?

  Read the article

• Unable to call through asterisk

  - by sk

  I want to create a voip service. I have installed asterisk-1.4 on a dedicated remotely hosted debian lenny distro. I made a sip.conf and extensions.conf so as to place a call between two sip phones(i am using xlite 3.0) installed in some other Windows PC. Whenever i switch this phones the asterisk console shows that Registration from '"1000"<sip:[email protected]>' failed for '122.168.10.254' - Peer is not supposed to register Where xx.xx.xx.xx is the server's IP. i.e my sip phones are unable to register with the asterisk server. Please help me to place call between two sip phones #sip show peers Name/username Host Dyn Nat ACL Port Status 2000 (Unspecified) D 0 Unmonitored 1000 (Unspecified) D 0 Unmonitored 2 sip peers [Monitored: 0 online, 0 offline Unmonitored: 0 online, 2 offline] # sip show registry Host Username Refresh State Reg.Time # sip show channels Peer User/ANR Call ID Seq (Tx/Rx) Format Hold Last Message 0 active SIP channels

  Read the article

• Configure VPN to access remote LAN network on Windows7

  - by PiotrK

  Situation: I have two Windows7 machines (PC and laptop). I've set PC as VPN server and laptop as VPN client using default built-in W7 network tools. I've disabled use default gateway in remote network on client machine, so client don't try to route all communication through VPN. I've routed port 1723 (TCP/UDP) on NAT to my server and enabled IPSec/PPTP/L2TP passthrough I've put my laptop in indepedent network (basically I've connected it via 3G network), connected to VPN server and checked ipconfig /all I've get: IP Address: 192.168.1.101 Mask: 255.255.255.255 Gateway: (none) LAN mask in server LAN network is 255.255.255.0 - I am surely missing something obvious, but Google doesn't give me any good advices; How can I access local LAN network from remote VPN client? How can I access local shared documents?

  Read the article

• Mac OS X: pushing all traffic through a VMWare VM [closed]

  - by bj99

  I want to set up an Astaro (Sophos) UTM in a Virtual Machine. The Setup should be at the end the following: Cable Modem (one IP adress) | [Ethernet] Sophos UTM (running as VM [VMWare Fusion 5] on the MacMini) | [WIFI] Airport Express v2 (for sharing Local Network to wireless and wired clients) 1)| [WIFI] 2)| [Ethernet over Thunderbolt Ethernet Adapter]* Clients MacMini (Local File Server) *To have the Mini also protected behind the UTM So the setup process for the UTM works fine, but then the problems start: I just have one external IP (from my cable modem provider)== So if I put the VM in briged mode my Internet connection drops, because the MacMini also has its IP adress. If I put the VM to NAT mode the Mini itself is not protected by the UTM So: is there a way to hide the en0 interface(Ethernet) and the en1 interface (Wifi) from the MacMini, so that they not even appear in System Preferences Network section but are available to the VM? That way the Mini must connect to the en2 interface (Thunderbolt adapter) to make any Internet/LAN connection and I just use the given single IP from the Cable Modem. Thaks for any suggestions... Sebastian

  Read the article

• Trixbox: external SIP with no sound

  - by Leandro Vidal

  I have a trixbox server and every works find except the external SIPs. Inside net all sound goes fine, but if I use a SIP phone outside the net, I can connect, I can receive calls but I there is no sound. I have this text in the sip_nat.conf: nat=yes externhost=xxxxx.dyndns.org localnet=192.168.1.0/255.255.255.0 localhost=192.168.1.210 externrefresh=10 qualify=yes And I have the ports from 5036 to 5082, 4569 and from 10000 to 20000 redirected to 192.168.1.210 on TCP and UDP. What's wrong? Thank you very much in advance

  Read the article

• Can iptables allow Squid to process a request, then redirect the response packets to another port?

  - by Dan H

  I'm trying to test a fancy traffic analyzer app, which I have running on port 8890. My current plan is to let any HTTP request come into Squid, on port 3128, and let it process the request, and then just before it sends the response back, use iptables to redirect the response packets (leaving port 3128) to port 8890. I've researched this all night, and tried many iptables commands, but I'm missing something and my hair is falling out. I thought something like this would work: iptables -t nat -A OUTPUT -p tcp --sport 3128 -j REDIRECT --to-ports 8990 This rule gets created ok, but it never redirects anything. Is this even possible? If so, what iptables incantation could do it? If not, any idea what might work on a single host, given multiple remote browser clients?

  Read the article

• VMWare Player guest does not re-aquire IP on bridged interface after host loses and re-acquires network connectivity

  - by Vineet

  I am running a Ubuntu Linux image in VMWare Player on my laptop. The host is Windows XP. There are two network adapters configured in VMWare Player - one is host-only and the other is bridged. Everything works fine as long as the host does not lose network connectivity. If the host loses connectivity (even briefly) and then re-acquires it, my bridged adapter in VMWare Player is still unable to get an IP address. The host-only adapter remains unaffected. Disconnecting/Reconnecting the bridged adapter does not help. Simply restarting the guest OS does not help. Restarting VMWare Player does not help. The only remedy is to reboot the host and then bring up VMWare Player all over again. Is there something I can try to avoid this reboot? I searched the existing questions but they seemed to talk about adapters in NAT mode, whereas I am interested in retaining Bridged mode.

  Read the article

• Single-port 2600 router with 2900XL switch

  - by Slava Maslennikov

  I have a setup, where the single port 2600 router is in port 0/2 in the switch, outside network is on port 0/1, and the rest (0/3-0/24) should be clients for the second network that would be managed by the 2600 router. I configured everything with two VLANs: 100 for outside (0/2-0/24), 200 for inside (0/1-0/2). 0/2 is a trunk port for the two VLANs. The issue that came about is that I can't have two VLANs on at once: software doesn't allow it. Now, I can ping the outside network devices (172.16.7.1, 172.16.7.103), and even google (8.8.8.8) from the router, but not the switch. Devices on connected get a DHCP lease properly but can't ping outside the network, just the router - 172.17.7.1 and the switch itself, 172.17.7.7. The configuration for both the router and the switch are here, as well as below. Router: rt.throom#sho run Building configuration... Current configuration : 1015 bytes ! version 12.1 no service single-slot-reload-enable service timestamps debug uptime service timestamps log uptime no service password-encryption ! hostname rt.throom ! enable password To053cret ! ! ! ! ! no ip subnet-zero ip dhcp excluded-address 172.17.7.1 172.17.7.2 ip dhcp excluded-address 172.17.7.3 172.17.7.4 ip dhcp excluded-address 172.17.7.5 ! ip dhcp pool VLAN200 network 172.17.7.0 255.255.255.0 default-router 172.17.7.1 dns-server 8.8.8.8 ! ip audit notify log ip audit po max-events 100 ! ! ! ! ! ! ! interface Ethernet0/0 no ip address ! interface Ethernet0/0.100 encapsulation dot1Q 100 ip address 172.16.7.15 255.255.255.0 ip nat outside ! interface Ethernet0/0.200 encapsulation dot1Q 200 ip address 172.17.7.1 255.255.255.0 ip nat inside ! router eigrp 20 network 172.16.0.0 network 172.17.0.0 no auto-summary no eigrp log-neighbor-changes ! no ip classless no ip http server ! access-list 1 permit 172.17.7.0 0.0.0.255 ! ! line con 0 line aux 0 line vty 0 4 login ! end Switch: sw.throom#sho run Building configuration... Current configuration: ! version 11.2 no service pad no service udp-small-servers no service tcp-small-servers ! hostname sw.throom ! enable password Oh5053cret ! ! no spanning-tree vlan 100 no spanning-tree vlan 200 ip subnet-zero ! ! interface VLAN1 no ip address no ip route-cache ! interface FastEthernet0/1 switchport access vlan 100 spanning-tree portfast ! interface FastEthernet0/2 switchport trunk encapsulation dot1q switchport mode trunk ! interface FastEthernet0/3 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/4 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/5 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/6 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/7 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/8 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/9 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/10 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/11 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/12 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/13 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/14 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/15 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/16 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/17 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/18 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/19 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/20 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/21 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/22 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/23 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/24 switchport access vlan 200 spanning-tree portfast ! ! line con 0 stopbits 1 line vty 0 4 login line vty 5 9 login ! end sho ip route gives: Gateway of last resort is 172.16.7.1 to network 0.0.0.0 172.17.0.0/24 is subnetted, 1 subnets C 172.17.7.0 is directly connected, Ethernet0/0.200 172.16.0.0/24 is subnetted, 1 subnets C 172.16.7.0 is directly connected, Ethernet0/0.100 S* 0.0.0.0/0 [1/0] via 172.16.7.1

  Read the article

• Multiple External IP Ranges on a Juniper SSG5

  - by Sam

  I have a Juniper SSG 5 firewall in a datacenter. The first interface (eth0/0) has been assigned a static IP address and has three other addresses configured for VIP Nat. I have a static route configured at the lowest priority for 0.0.0.0/0 to my hosting company's gateway. Now I need to configure a second IP block. I have the IPs assigned to the second interface (eth0/1) which is in the same security zone and virtual router as the first. However, with this interface enabled I (a) can't initiate outbound sessions (browse the internet, ping, DNS lookup, etc) even though I can access servers behind the firewall just fine from the outside and (b) can't ping the management IP of the firewall/gateway. I've tried anything I can think of but I guess this is a little above my head. Could anyone point me in the right direction? Interfaces: ethernet0/0 xxx.xxx.242.4/29 Untrust Layer3 ethernet0/1 xxx.xxx.152.0/28 Untrust Layer3 Routes: http://i.stack.imgur.com/60s41.png

  Read the article

• iptables: matching multiple ip addresses

  - by Tax

  Hi guys, I am working on a iptables rule to apply after my shorewall script has initialized my firewall. I want a spicific IP (10.0.1.19) address in my lan to be redirected to 10.0.64.1 except if it is going to paypal. I have the following rule, and that works like a charm iptables -t nat -A PREROUTING ! -d 1.2.3.4 -s 10.0.1.19 -j DNAT --to 10.0.64.1 My problem is that paypal uses multiple ip addresses, and I am not allowed to have multiple IP-addresses. https://ppmts.custhelp.com/cgi-bin/ppdts.cfg/php/enduser/std%5Fadp.php?p%5Ffaqid=92 On top of this problem I would like to know how to remove the rule again, without having to restart shorewall. Kind regards Tax

  Read the article

• iPhone VPN with OpenSwan fails to reconnect

  - by gilm

  I have managed to configure VPN with iPhone and OpenSWAN on Linux 2.6. Though, when disconnecting the iphone and reconnecting, it times out. I have found that: 1) no packets are being sent when you disconnect iPhone from VPN. 2) when reconnecting, pluto picks up on the older socket and tries to use that state machine. which then fails and iPhone retransmits until times out. I'm using the latest version in git, including #1204 patch. I see the NAT-T patch debug lines in the logs. But still, no cookie. Help?

  Read the article

• What is the best MTA setup for a home/laptop computer (*not* server)?

  - by thomasrutter

  Hello, What is a good MTA (e.g. Postfix or something else) setup for a home computer behind a NAT, or a laptop that is not always online? I've read a lot of Postfix tutorials on how to set it up this way or that, but they are usually geared towards computers that are servers ie they have a static IP have a domain name are always connected to the same network My requirements are, I guess: Ability to redirect mail for local users to another server of my choosing. No listening for incoming SMTP connections - outgoing only Ability to route outgoing mail via an external SMTP server with authentication (and perhaps encryption) If not Postfix, I need an MTA which can queue up mails in case it temporarily has no internet connection.

  Read the article

• How to get started with tcp/ip v6?

  - by Johan

  Hi Now and then there is "news" about that the ip numbers will run out in X years, and we must change to tcp/ip v6... And even thou this crisis never really happens it has waken a question, how do you get started with tcp/ip v6? What can I do at home and is this a good or bad idea? Can you use IPv4 and IPv6 in the same cables in the same LAN, or do you need to physically separate them? Can you have some translation box so you can reach the "normal" internet from the IPv6 connected devices? (Just like a NAT-Router) Can someone please clarify the situation a little bit? Thanks Johan

  Read the article

• Can't connect to Apple Time Capsule in home network using Home Plugs from Win 7 Machine

  - by Eugene

  I have the following home network setup with subnet 255.255.255.0 but recently moved my time capsule to a different location when I added a third Home Plug and can no longer ping or map a network drive to it from the Windows 7 Machine. However using Airport Utility on the Windows 7 machine I can manually configure the Time Capsule. Using a Macbook on WIFI Network 1 or 2 - I can backup to the time capsule, so its accessible via both the router wifi network and the time capsule wifi network. The Time Capsule is set to BRIDGE function - ie no NAT or DHCP server enabled. Any bright sparks out there that can help diagnose the problem? Router (192.168.1.254) WIFI Network 1 | | |---- Home Plug one |---- Home Plug Two | |---- Computer A Windows 7 (192.168.1.160) | |---- Printer (192.168.1.69) |---- Home Plug Three | |---- Apple Time Capsule (192.168.1.150) WIFI Network 2 |---- Smart TV (192.168.1.70) | |---- Apple TV (192.168.1.4)

  Read the article

• Virtual Box ie7 won't connect to the internet

  - by j-man86

  I use IE7 & IE8 disk images from microsoft and Virtual Box to test my websites in IE. One day I stopped being able to connect to the internet with virtual box, seemingly after trying to alter proxy related settings to view Hulu.com outside of the U.S... I don't know whether it's coincidence or not. Anyway, I am using the 'PCnet-FAST III (NAT)' adapter with virtual box. Can you guys help me troubleshoot this issue? What information do you need on my current settings? Thanks so much!

  Read the article

• Configure Nginx On Separate Server For Zimbra Webmail

  - by alphadogg

  How do I properly configure a server with nginx to front for a Zimbra server with multiple domains? I run a small SOHO network. I NAT/port forwarding on my Comcast router to get traffic to my handful of servers. I setup a server with Zimbra, call it host1.internal.local. The server currently has two domains, call them domain1.com and domain2.com. Both offer webmail access at webmail.domain1.com and webmail.domain2.com. I have a separate server with nginx. I want to configure nginx to reverse proxy, such that I can direct all HTTP/HTTPS, and send webmail traffic via matched host address/headers to the Zimbra server. If possible, I'd like to know how to map IMAP, POP and SMTP traffic too. How would I do this?

  Read the article

• Problems connecting Centos on VMware player to the network using bridged connection.

  - by Sakin

  Hi, I installed CentOs on VMware Player 3.0.1 running on windows XP. When trying to configure it to connect to the internet in a bridged configuration, I get an error message when trying to bring up the network interface: [root@VMLinux ~]# /et/init.d/network start Bringing up loopback interface: [ OK ] Bringing up interface eth0: Determining IP information for eth0... failed [FAILED] VM is running on a machine that has access to the network, I tried it on two different networks that have DHCP enabled. Everything works fine when using a NAT connection through my host. How can I make the bridge work for me? Thanks.

  Read the article

• esxi change MKS port

  - by Daniel Powell

  I need to connect to my home esxi box over the web however I cannot use the default port 902 for the console viewer due to firewall restrictions. Is there a way to change this port somewhere even if i can just do some nat and redirect any other port to that port? I've had a look around and when I try to connect to the esxi server in vSphere client I cant find anywhere I can specify the port. I know this is not the recommended way to do this but its a testing server and security is not an absolute must on this box. I also cannot setup a vpn to this box.

  Read the article

• Connect devices plugged into Raspberry Pi ethernet to WiFi network

  - by Tom

  I'm just starting out on a mission to learn more about networking and I've followed a tutorial (http://raspberrypihq.com/how-to-turn-a-raspberry-pi-into-a-wifi-router/) to turn my Raspberry Pi into a wifi router. That worked really well so I modified it slightly so that I can use a tethered iphone for the internet connection - I just switched all "eth0" references to "eth1" (the iphone interface) and added a script to set everything up when the phone is plugged in. This setup has freed up the Pi's ethernet port so I'd like to try and take this a step further and allow devices plugged into it to connect to the network. If possible, I'd like to try adding a switch so I can connect multiple devices. I've tried fiddling around with nat & iptables with no luck so my question is, how can I connect devices on eth0 to my wlan network?

  Read the article

• How to access web server of any machine of my network from the outside

  - by Luc

  Hello, I have an ip like username.dyndns.org, this is the external IP of my router. On my lan, I have several machine (m1, m2, ...) , each running a dedicated web server. Is it possible to reach each machine from the outside with something like: http://m1.username.dyndns.org http://m2.username.dyndns.org ? Do you know what needs to be configured in my router for NAT ? Also, is there a special directive in Apache to do so ? Thanks a lot, Regards, Luc

  Read the article

• Configure Windows Routes for VPN

  - by Florin Sabau

  I have a Virtual PC/VMWare machine that runs Windows Server 2003. This virtual machine uses an IPSec VPN client program to connect to a remote network. I configured the virtual machine to have 2 NICs: NAT - to be used by the VPN Client to access the remote network Host only - to be able to access the virtual machine from the host The reason I have this setup is because I want to be able to access some remote network from the host machine. I could've installed the VPN client on the host machine, but the host runs Windows 7 and the client doesn't support it. The problem: although the virtual machine is normally reachable (ping + http access), as soon as the VPN client is started, neither of the NIC addresses are reachable anymore. I'm wondering if it is a routing problem that needs to be addressed? How do routing/VPN client connection affect the ability of the server to respond to client requests from the host?

  Read the article

< Previous Page | 29 30 31 32 33 34 35 36 37 38 39 40  | Next Page >