Search Results

Search found 1051 results on 43 pages for 'nic foster'.

Page 33/43 | < Previous Page | 29 30 31 32 33 34 35 36 37 38 39 40  | Next Page >

  • controlling the bandwidth using tc

    - by Supratik
    Hi I have two NIC etho is connected to the internet and eth1 is connected to the LAN. I want to restrict the download limit using iptables and linux tc. So I wrote a test script to verify if it is working. My iptables configuration is as below. iptables -t mangle -N INBOUND iptables -t mangle -I PREROUTING -i eth0 -j INBOUND iptables -t mangle -A INBOUND -j MARK --set-mark 60 My ingress configuration is as below. tc qdisc add dev eth0 handle 1: ingress tc filter add dev eth0 parent 1: protocol ip prio 1 handle 60 fw police rate 100kbit burst 20kbit drop flowid :1 Can you please tell me what I am missing here ?

    Read the article

  • Ubuntu Server 12.04 as a router. Problem with DNS?? Or Routing table?

    - by Lorenzo
    I have a virtualbox lab made up of 4 Windows 2008 R2 servers (DC/DNS,SQL,SHAREPOINT, EXCHANGE) that are configured with static ip addresses with NIC's attached to Internal network. Everything works. I had the requirement to execute some tests that also access external services available on the internet. To keep things clean and similar to the production environment I have installed another VM, with Ubuntu Server 12.04 64 bit and configured (I hope) to work as a router like described on this post. This VM has two network interfaces: first is Bridged with the host and is used as a WAN connection and the other one attached in the Internal Network with its own static IP address on the internal network subnet. But actually the Windows servers does not connect to the internet while the unix one connects. I did a route command. this is the result: Kernel IP Routing table Destination Gateway Genmask Flags Metric Ref Use Iface default 10.69.121.1 0.0.0.0 UG 100 0 0 eth0 10.69.121.0 * 255.255.255.0 U 0 0 0 eth0 192.168.83.0 * 255.255.255.0 U 0 0 0 eth1 Can somebody help me with this configuration? :) Thanks! Addendum: I forgot to mention that one of the windows server hosts a DNS service for which I should maybe configure a forwarding server but I do not exactly know which server to forward on... :(

    Read the article

  • NATing with a single-homed machine possible?

    - by Harry
    I have the following setup: a) a single-homed machine, A, that can see the Internet. b) other machines B, C, and D that cannot see the Internet. c) A, B, C, and D can see each other. d) all machines are running either RHEL 5.3 or Fedora 16. Question: Is it possible to have B, C, and D share the Internet connection with A somehow? Note, again, that machine A does not have a second NIC installed. (The solutions that I am finding on the Net assume A to be a dual-homed system!) Also, could you please recommend a set of book(s) or online resources for a current and in-depth coverage of iptables for people with only a basic knowledge of TCP/IP?

    Read the article

  • Strange RDP / Remote Desktop problem

    - by John Landheer
    I'll try to be as specific as I can be: Server is running SBS 2008 R2 (with all updates) Server is connected to the internet Server has 2 NIC's, one is disabled Server is running RDP Service (accessible directly from the internet, I know, not as secure as it should be) Computers A and B are on the same local net. Computers A and B are both Windows 7. Users X and Y are both admins on the server Computer A can connect as user X to the server with mstsc Computer A can connect as user Y to the server with mstsc Computer B can connect as user X to the server with mstsc computer B CANNOT connect as user Y to the server with mstsc! The last point is the problem, I get an authentication error. This used to work flawlessly for the last year. The server and desktops have been rebooted. I find it very strange....

    Read the article

  • Windows Server 2003: Router, DHCP, Loses internet connection

    - by jM2.me
    I have following setup: a windows server 2003 dedicated server with tho nics. One is connected to internet (no modem/router), and second one is connected to private network. Server has DHCP server installed on it and internet nic is being shared for internet access. The problem is sometimes server loses connection to the internet, so same happens to private network. So far I can manually fix it by releasing and renewing IP address. What could be the cause of this problem? DHCP lease from ISP? Thanks

    Read the article

  • Lost connectivity after configuring multiple network adapters on separate networks

    - by Dave Long
    I am trying to setup an Ubuntu hosting server, currently just for development, and the server has two NICs, each sitting on a different network. eth0 is on 192.168.200.* and eth1 is on 192.168.101.* and each one has a static IP. eth0 is the public facing NIC card and eth1 is strictly for internal access to the server. I initially only setup eth0 and added the eth1 card when I needed it. eth0 was working find until I added eth1, now, can't get any connectivity on eth0 unless I pull eth1 out of the box. The configuration on each system is as follows: auto eth0 iface eth0 inet static address 192.168.200.94 netmask 255.255.255.0 network 192.168.200.0 broadcast 192.168.200.255 gateway 192.168.200.253 auto eth1 iface eth1 inet static address 192.168.101.64 netmask 255.255.255.0 network 192.168.101.0 broadcast 192.168.101.255 gateway 192.168.101.254 Again eth0 worked fine until I added eth1. I have seen this happen with Windows servers if you have a Default Gateway setup for both NICs, but I am not sure if this works the same on Ubuntu. My resolv.conf file looks like so: nameserver 192.168.101.59 nameserver 192.168.101.58 domain domain.local search domain.local Per request here is the Routing table 192.168.101.0 * 255.255.255.0 U 0 0 0 eth1 192.168.200.0 * 255.255.255.0 U 0 0 0 eth0 default 192.168.101.254 0.0.0.0 UG 100 0 0 eth1 default 192.168.200.253 0.0.0.0 UG 100 0 0 eth0

    Read the article

  • How do I bridge a connection from Wi-Fi to TAP on Mac OS X? (for the emulator QEMU)

    - by penx
    I'm trying to setup a bridge between my Wi-Fi connection and an emulator (QEMU). I need a virtual machine to be on the same LAN as the host, with its own IP address. QEMU requires using a TAP (virtual network device) so I have installed tuntaposx, have it running, and can open up QEMU using a TAP: qemu-system-arm -kernel zImage.integrator -initrd arm_root.img -m 256 -net nic -net tap,ifname=tap1 -nographic -append "console=ttyAMA0" I have a script that configures the bridge once QEMU has opened up the TAP interface: sysctl -w net.link.ether.inet.proxyall=1 sysctl -w net.inet.ip.forwarding=1 sysctl -w net.inet.ip.fw.enable=1 ifconfig bridge0 create ifconfig bridge0 addm en1 ifconfig tap1 0.0.0.0 up ifconfig bridge0 addm tap1 ifconfig bridge0 up If I manually set an IP on the VM, I can ping from the VM to the host, but not from the host to the VM. Also, I can't access the rest of the network from the VM - including not being able to set an IP over DHCP. Any ideas?

    Read the article

  • How to setup wireless radio to network using 2 nics?

    - by CptanPanic
    I am having problems setting up this network, hopefully someone can help me. Laptop <- Wireless Radio <- ... - Wireless Radio <- CPU1( NIC1,NIC2) <- SWITCH <- CPU2 I have a computer with 2 NICs (CPU1). One goes to a wireless radio that connects to a wireless laptop, the other NIC goes to network switch. I can't connect Wireless Radio to switch due to space constraints. All the machines and radios are on same network addresses. I tried using Window's Bridge network which did allow Laptop to reach CPU2, but not CPU1. What is the way to get this to work so all the computers can talk to each other?

    Read the article

  • How do I fix my ethernet card losing network connection every few minutes with kernels 3.8.x?

    - by igoryonya
    I'm using Ubuntu 13.04. My laptop is Acer Aspire one 722-c58rr, and my ethernet card works for a few seconds at a time with kernels 3.8.x, however, kernels 3.5.x and below worked fine. On kernels 3.8.x, it works fine after boot for about a minute, then it looses network connection. When pinging to some address, it says: network address is unreachable, but it can ping it's own address. The address is statically configured. Everything was working fine before. I went to vacation, where I used WiFi and 3G connections, so I didn't notice that the problem occurred. Came back home, plugged in into the ethernet. It worked for a minute then stopped. Rebooting commutator fixed the problem. Tried to connect to a different commutator, same problem. Unplugging and plugging the cable fixes the problem for another minute. Disconnecting eth in Network manager and reconnecting it again, does the same thing. WiFi has no such problem. Tried to use a different cable that works fine on another computer, the same problem. Tried to boot with the lower kernel version, the same problem was happening until I got to the version 3.5 of the kernel series. Everything works fine on the kernel 3.5.x, but I don't want to miss out on the new kernel's features. Executing commands, when booted with 3.8 kernel series, give the following results: lspci| grep -i eth: 06:00.0 Ethernet controller: Qualcomm Atheros AR8152 v2.0 Fast Ethernet (rev c1) dmesg| grep eth1: [ 89.548291] atl1c 0000:06:00.0: atl1c: eth1 NIC Link is Up How do I fix it, while staying in the new kernel version?

    Read the article

  • Windows 7 doesn't connect to mapped drives at start up.....

    - by danbo
    We are testing Windows 7 (32bit version) and logon to a windows 2003 domain that runs a logon script whichs maps our drive letters. We have no control over the domain. Of our 7 test users, 5 continually recieve red X's on their network drives after they logon. Double clicking on them connects the drives, however, any aplpication that requires files on the fileserver will fail since it thinks it has no connection to the drive. We have tried several reg edits (Enable Linked connections, KeepConn), we have tried to find information in the event viewer to no avail. We have also looked at any differences in NIC driver versions (none). The other 2 computers that can connect without problem are local admins, but, if we logon to the 5 that have the problem with the local admin credentials we get the red x's as well??? This one is a real head scratcher......

    Read the article

  • nVidia 9800 GTX+ X11 fails to initialize. no unity or lightdm

    - by rlemon
    I have just upgraded my work pc to 12.04 (not upgrade, fresh install), installing updates during the install, and after everything has loaded (with no errors) and I restart I get brought to console 1 tty login. Console 7 looks like this: IIRC I did not have to finagle with my drivers on 11.10 to get this card working. If this is in fact a driver bug I will remove this post and submit the bug but i'm not 100% confident that it is. I attempted to run unity --reset and got this: Lastly I tried $ sudo apt-get install nvidia-current which tells me nvidia-current is already the newest version. so I ran $ sudo dpkg-reconfigure nvidia-current which says /usr/sbin/dpkg-reconfigure: nvidia-current is broken or not fully installed. Anything I can try from here would be awesome. Currently the only way to get the system up and running was to shut down, plug one of my monitors into the onboard video, enable the onboard video card from the BIOS, then boot back up (and on my single monitor everything is fine). update So I have been able to boot fresh with the ext card plugged in as long as I don't take the updates with the install. past this if I only install the nvidia drivers (nvidia-current or nvidia-current-updates) from the main server (or canadian) I then get the problems.. My proposal; which I don't know where to look for: Can I try installing the previous version of this driver? In the past, on another machine I had issues with my NIC driver being funky... downgraded to the previous driver and bam everything was merry and well.

    Read the article

  • What are my options for booting OSX 10.6 when my DVD drive is broken?

    - by Kev
    I'm about to completely re-pave my Mac Mini but the DVD drive has died on me which means I can't boot from the installation media. I know I can boot from a USB stick but I don't have one available, what are my options given the following hardware at hand? Netgear ReadyNAS Duo NAS (NIC or USB only, no Firewire) USB HDD (no Firewire) I've ripped an ISO of the installation disk, can I somehow get the Mini to boot from this image using one of the above? If I decide not to re-pave but just upgrade, can the Mac be upgraded just using an OSX 10.6 ISO image on its disk?

    Read the article

  • Looking for an open source real-time network analysis program

    - by JrSysAdmin
    Can somebody recommend an open source real-time network analysis program? What I'm looking for the program to do is display a graph of bandwidth usage by IP within our internal network that can quickly be viewed any time we need to (typically when we want to quickly find out who is utilizing high amounts of bandwidth and slowing down the network). We ideally simply want to hook up a monitor on the wall of our server room to a system whose NIC will be in permissive mode to log all network activity in a visual manner which can easily be seen and running 24/7. Prefer open source as I do not have a budget for this project and prefer open source projects in general. I'd also prefer for this to be available for CentOS but any linux distro or Windows OS would be acceptable. Thanks!

    Read the article

  • Windows 2008 R2 on ESXi 4.1 cpu utilization kernel high

    - by MK.
    I have a Win2k8 guest running on ESXi 4.1. The host has 12 cores and the problem happens even if the guest is the only VM on the host. We have 4 cores dedicated to the guest. We noticed that network starts chocking when the CPU load goes up. After some testing we noticed that when running a simple CPU hogging tool set up to run 3 threads at 100% the regular CPU load goes to 75% like it should and the "kernel times" graph in task manager goes up to 25%. My intuition tells me that the network problem and kernel times problem are the same. This is confirmed by another similar VM we created on the same host which doesn't have either of the problems. VMWare tools are obviously installed. The nic is e1000. What else can we do to troubleshoot this?

    Read the article

  • Spare PC with XP to be used as Torrent Downloader and local Web Server HOWTO?

    - by gslide
    Hi I'm a bit in a pickle in trying to setup my old laptop using Windows XP to be able to serve as two devices in one, I want to make it a downloader for torrents and a local web server as well and how to do this? I have a wireless NIC and LAN, and I have two internet connections and i would like to be able to download torrent only on LAN and be a webserver on the Wireless, also the webserver can be accessed through the internet. The reason for trying to separate the connection is I can't have torrent downloads using all my bandwidth as my web pages cant be access as it times out or too slow. I have two broadband connections, is this even possible or would i need a different OS or program that I can download? please

    Read the article

  • vmconvert exchange 2007

    - by user72950
    Has anyone tried to run vmconvert on a Windows 2008 64 bit server running Exchange 2007? Here is what I did. I stopped the Exchange processes and IIS and ran vmconvert. When I moved the new server to my vmware server 2.0 for windows and booted it. All seemed well except I could not send or receive email. All outbound was stuck in the queues. I was able to log in via OWA so that tells the network setup/NIC bindings were OK. Any ideas?

    Read the article

  • Iptables port mapping from two PCs to one

    - by Anton
    We have 3 PCs, two of it are connected to internet (both of it have 2 NIC) PC1: eth0 - 1.0.0.1 (external IP) eth1 - 172.16.0.1 (internal IP) PC2: eth0 - 1.0.0.2 (external IP) eth1 - 172.16.0.2 (internal IP) PC3: eth0 - 172.16.0.3 (internal IP) Now we want to map port 80 from PC1 and PC2 to PC3. But there is the problem: iptables port forwarding works well from PC1 or PC2, but only in case if PC3 have PC1 or PC2 as gateway. So, question is: can we have port mapping from both PC1 and PC2 regardless of gateway settings on PC3? Thank you in advance.

    Read the article

  • Keeping the wireless connected.

    - by casr
    I’m running OpenBSD on a computer which is connected via wireless to the network. It is a well supported NIC and I’ve had no problems with it from a hardware perspective. Unfortunately my wireless access point occasionally loves to forget it’s settings. I then have to help it remember. However, in this intervening time my OpenBSD box drops the connection and then does not automatically reconnect. I have alleviated my problems by running this simple script in the background: #!/bin/sh while [ 1 ] do ping -c1 192.168.1.254 > /dev/null if [ $? = 1 ] then sh /etc/netstart ral0 > /dev/null fi sleep 30 done [Ping the access point. If there is no response attempt to reconnect.] It seems to me to be a very suboptimal solution. Has anyone else come across a better way?

    Read the article

  • ISCSI sessions appear from nowhere

    - by Maraca
    Hi, I am using Win2008 32bit Ent. running in Hyper-V with 2 LUNs over ISCSI connection (this is a MS cluster with one LUN being quorum and second as a storage). In ISCSI - target - details I see multiple sessions from same target (currently 7), however I am not sure where they are coming from as I have only one virtual NIC on this server. Sure enough 2 LUNs appear 7 times each in device manager or in disk manager. On the cluster partner however, I do not see that problem. There is only one session per target. Installing MPIO makes only difference - I am getting 8 sessions instead of 7 once I reboot. Does any one know what can cause this behavior?

    Read the article

  • Am I supposed to assign the broadcast IP somewhere?

    - by pvieira
    This is a very basic question from a newbie point of view. I have a dedicated server at Hetzner running Windows 2008 R2. I bought a subnet of IP addresses to use in this server. They provided me a given range of IPs, incluind one Ip labeled as "Broadcast". I know how to assign those IPs to the NIC, but should I do something with the Broacast IP, like configure it somewhere on Windows? Or can I just ignore it and I'll be fine? This IP range will be used to host SSL sites.

    Read the article

  • Two Network Adapters on Hyper-V Host - Best way to configure?

    - by GoNorthWest
    I have two physical network adapters installed in my Hyper-V host. I want one to be dedicated to the host, and the other to provide external network services to the VMs. Would the appropriate configuration be as such: Leave the first physical network adapter alone, assigning it the host IP, but not using it to create any Virtual Netorks For the second physical adapter, I would create an External Network, along with a Microsoft Virtual Switch, and use that to provide network services to the VMs. Each virtual NIC for the VM would be associated with that External Network. A static IP would be assigned to this adapter, and each VM would be assigned a static IP as well. The above seems reasonable to me, but I'm not sure if it's correct. Does anyone have any thoughts? Thanks! Mark

    Read the article

  • Multiple network interfaces and UDP packets distribution

    - by Robert Kubrick
    I have a Linux server with 2 1Gb network interfaces eth1 and eth2. If I start 2 clients listening to the same multicast address and each client connects through a different NIC (say client 1 listens to the multicast through eth1 and client 2 through eth2), then client 2 gets duplicate UDP packets. If both clients use the same interface eth1 on the other hand, both clients work fine. I have already tried to set arp_filter and proxy_arp to 1 (arp flux issue) but it hasn't solved the issue. Is this a Linux kernel problem? Or is there another way to setup the interfaces correctly?

    Read the article

  • Windows 8 Hidden Downloading? Slow Internet?

    - by EApubs
    After upgrading to Windows 8, im facing a very slow download speed. My router and the NIC is working fine because on the same PC I also have Linux. In Linux, everything works fine. When checking through the task manager, it shows that the system use the full bandwidth 1Mbps even without a download. The process menu doesn't show whats taking much bandwidth. The bitdefender's firewall also shows network activity. Is there any hidden apps downloading? How to fix this?

    Read the article

  • I need to make Windows 7 STOP disabling the wifi adapter when the wired LAN is connected

    - by Escobar Ceaser
    This is a Dell Latitude E6430. There is a setting in the bios to control this behavior and I have DISABLED it but it still happens. I am also running the latest bios. When I plug in a network cable the wifi adapter becomes disabled. I need it to stay enabled. What else could be making this happen? EDIT: The reason I need to do this is because with NETSH WLAN commands you can create a wifi hotspot by sharing the internet connection on the wired adapter and broadcasting a ssid on the virtual wifi nic. I do this all the time but it's not working on this laptop. I'm wondering if it's a network security thing where I am. I'm going to try from my hotel tonight and report back.

    Read the article

  • dist-upgrade broke my insatll HELP

    - by diefuchsjagden
    so I ran apt-get update; apt-get dist-upgrade the upgrade failed and I lost the gui, I have an encrypted /home drive. When I run apt-get * (any command) I have all kinds of errors mostly missing depends and thats because apparently my network stack is gone. I have no NIC if I run ifconfig. It doesn't even show up with lspci If I were to do a "clean" install of 10.04 LTS which is what I had on my on my build, will I lose all my data? BTW I was just using Ubuntu's default encryption to manage the encryption using my PSWD as the key so if I were to use the same user name and PSWD would my data be accessible? I can see my data from command line, when or if Xorg does start it just loads a basic window with nothing but a black X in the middle of the screen which I can only assume is my mouse cursor but it doesn't move! Reddit /r/linux had some ideas none of which worked was, no help. And apparently /r/ubuntu is full of jerks because all they did was ridicule me. If I can get my install back I probably will be switching back to either Slackware or Gentoo. The Ubuntu forums were of no help they had the same suggestion as /r/linux. I am about to just run my back up script to my back up drives and nuke everything else but I'd rather not.

    Read the article

< Previous Page | 29 30 31 32 33 34 35 36 37 38 39 40  | Next Page >