Search Results

Search found 1072 results on 43 pages for 'rubber boots'.

Page 33/43 | < Previous Page | 29 30 31 32 33 34 35 36 37 38 39 40  | Next Page >

• Can't type after "ruby script/server" in InstantRails

  - by mathee

  I'm a newb to RoR. I'm using the book "Agile Web Development with Rails" to get started on Windows 7. In the command window, I run the following. >rails demo >cd demo >ruby script/server At this point, it boots the Mongrel server: => Booting Mongrel => Rails 2.3.5 application starting on http://0.0.0.0:3000 => Call with -d to detach => Ctrl-C to shutdown server The book goes on to tell me to run ruby script/generate controller Say but, I cannot Ctrl-C -- or type anything for that matter -- after booting the Mongrel server. Am I supposed to create the new controller in another instance of the InstantRails command window? Right now, the only way I can stop the server is closing the window in which I started the server! Please let me know if you need any other details. tia.

  Read the article

• What makes you want to learn Common Lisp? What do you want from it?

  - by JasonFruit

  I'm working on a toolkit (sort of a live-CD Lisp-in-a-Box) for people new to Common Lisp, and I want to make sure it is broadly satisfying. What is attractive to you about Lisp? What do/did/would you need to get you started and keep you interested? What I have so far: SBCL 10.22, Emacs 22.3, SLIME, and LTK bundled together and configured on a Linux live-CD that boots entirely to RAM. I've now released the result of this; it is available at the Thnake website.

  Read the article

• Preferred Method Of Application Purchase

  - by Chuck

  This is more of a "programmers" question, but felt that it was technical enough to belong on Stack Overflow instead. I'm launching an application soon that will follow the shareware model of purchase. I've thought about implementing this in a few ways: Limited access to the application until they purchase Full access to the application but expires after 30 day, requiring them to purchase to retain utility. Full access to the application indefinitely, but with a 10-15 second pop-up box on start-up asking them to register -- like mIRC does (or used to do). The method of authentication will be web-based. I'll provide them with an authentication key and they'll put it in the application. Whenever the application boots up, it'll check my web service and determine whether the application is genuine or not. This isn't my question. My question is: Is there a preferred method of implementation? I'd like to piss off the users as little as possible, but I'd also like to get paid for my work.

  Read the article

• Trying to start a service on boot on Android

  - by Alex

  I've been trying to start a service when a device boots up on android, but I cannot get it to work. I've looked a number of links online but none of the code is working. Am I forgetting something? This is my code. Manifest <receiver android:name=".StartServiceAtBootReceiver" android:enabled="true" android:exported="false" android:label="StartServiceAtBootReceiver"> <intent-filter> <action android:name="android.intent.action._BOOT_COMPLETED"/> </intent-filter> </receiver> <service android:enabled="true" android:name="com.test.RunService"/> Receiver OnReceive public void onReceive(Context context, Intent intent) { if("android.intent.action.BOOT_COMPLETED".equals(intent.getAction())) { Intent serviceLauncher = new Intent(context, RunService.class); context.startService(serviceLauncher); Log.v("TEST", "Service loaded at start"); } } Thanks,

  Read the article

• Starting socket server in ruby on rails on cloud environments (heroku)

  - by ElTren

  Hi, I'm using heroku, and I can push a Ruby on Rails app just fine, I'm trying to convert this to a Socket server, basically I would need to bind to an open port, in this case, I know Heroku only does 80 22 and 443. Is it possible to bind to port 80 on those environments? Also, how would I setup the entry point for this socket server, all I know is that when script/server it boots up the app. Do I have to put the function call there? How can a socket server start instead of the rails app on top of whatever webserver heroku has.

  Read the article

• What is the best way to start building a Web 2.0 / Start up?

  - by spyhunterx

  I'm planning on developing my own web 2.0 application from scratch, using Yii Framework, JQuery, and HTML5 Boilerplate or Boots Strap. But I have huge dilemma. To begin this web 2.0, where is it best to start ? I've already completed flowcharts, diagrams and descriptions sheets for my project; However, i'm stuck programming and design wise. Should I start with the CSS of the the website, Photoshop, or functionality ( Php ) ? Where should I start ? I would really love this start up to be a success. I will greatly appreciate some responses.

  Read the article

• Installation from Usb

  - by supreet

  Want to install ubuntu from usb flash but after i press continue after the install alongside windows button my HP pavillion laptop restarts and boots into vista and starts wubi installer. The wubi installer installation process ends with the following error. 'None Type' object has no attribute 'get_info' A portion of log file is as follows 12-01 06:15 DEBUG downloader: download finished (read 198 bytes) 12-01 06:15 INFO saplog: Verified a signature from ID:'46181433FBB75451'. 12-01 06:15 INFO saplog: Checking block bindings.. 12-01 06:15 INFO saplog: Key verified successfully. 12-01 06:15 DEBUG CommonBackend: metalink md5sums: 1fdde0057923dc6c4bd69b657480a631 *ubuntu-12.10-beta2-desktop-amd64+mac.metalink 091d4adafcfe4eea08eb41771be3f3ba *ubuntu-12.10-beta2-desktop-amd64.metalink 940ab0bf82879435181f8c03304e7387 *ubuntu-12.10-beta2-desktop-armhf+omap4.metalink 9e0ad0a15414df437a27c66da938d3e3 *ubuntu-12.10-beta2-desktop-i386.metalink 4672b67404c84ba74bf104607bbec49a *ubuntu-12.10-beta2-server-amd64+mac.metalink a8d35d8579f11579e802667bbcb7b0fb *ubuntu-12.10-beta2-server-amd64.metalink fb6219893d9f4f329183fafaac258681 *ubuntu-12.10-beta2-server-armhf+omap4.metalink 12fbf5ccf3aedfd8fe31f1ab00ec8ddb *ubuntu-12.10-beta2-server-i386.metalink e1a7672decc21eb6a65464b0a239a1db *ubuntu-12.10-desktop-amd64+mac.metalink 894437367bf791cf02902d6f5285af98 *ubuntu-12.10-desktop-amd64.metalink 57a58f151b50e218acc4724388d2f387 *ubuntu-12.10-desktop-armhf+omap4.metalink 11e206f0d5e147fe05b9e85d78f5f187 *ubuntu-12.10-desktop-i386.metalink fc37a124ca1957d7549a296d59e3dd81 *ubuntu-12.10-server-amd64+mac.metalink 35afee005d732a9ad0361b4aae25e3c3 *ubuntu-12.10-server-amd64.metalink 68adfc9d71d5b3613a09c3e6c45f8ba5 *ubuntu-12.10-server-armhf+omap4.metalink c4fd126394cf2e1bbd626b5f74b3e40b *ubuntu-12.10-server-i386.metalink 12-01 06:15 ERROR CommonBackend: The md5 of the metalink does match 12-01 06:15 ERROR CommonBackend: Cannot authenticate the metalink file, it might be corrupt None 12-01 06:15 DEBUG TaskList: #### Finished get_metalink 12-01 06:15 DEBUG TaskList: New task get_file_md5 12-01 06:15 DEBUG TaskList: #### Running get_file_md5... 12-01 06:17 DEBUG TaskList: #### Finished get_file_md5 12-01 06:17 ERROR CommonBackend: Invalid md5 for ISO D:\ubuntu\install\installation.iso (b4191c1d1d6fdf358c154f8bf86b97dd != 7e15759e5716c9bc662cd3efa5514cef) None 12-01 06:17 DEBUG TaskList: ### Finished check_iso 12-01 06:17 ERROR TaskList: 'NoneType' object has no attribute 'get_info' Traceback (most recent call last): File "\lib\wubi\backends\common\tasklist.py", line 197, in call File "\lib\wubi\backends\common\backend.py", line 595, in get_iso File "\lib\wubi\backends\common\backend.py", line 564, in use_cd AttributeError: 'NoneType' object has no attribute 'get_info' 12-01 06:17 DEBUG TaskList: # Cancelling tasklist 12-01 06:17 DEBUG TaskList: # Finished tasklist 12-01 06:17 ERROR root: 'NoneType' object has no attribute 'get_info' Traceback (most recent call last): File "\lib\wubi\application.py", line 58, in run File "\lib\wubi\application.py", line 132, in select_task File "\lib\wubi\application.py", line 158, in run_installer File "\lib\wubi\backends\common\tasklist.py", line 197, in call File "\lib\wubi\backends\common\backend.py", line 595, in get_iso File "\lib\wubi\backends\common\backend.py", line 564, in use_cd AttributeError: 'NoneType' object has no attribute 'get_info' Please help.

  Read the article

• Sony VAIO with Insyde H2O EFI bios will not boot into GRUB EFI

  - by Rohan Dhruva

  I bought a new Sony Vaio S series laptop. It uses Insyde H2O BIOS EFI, and trying to install Linux on it is driving me crazy. root@kubuntu:~# parted /dev/sda print Model: ATA Hitachi HTS72756 (scsi) Disk /dev/sda: 640GB Sector size (logical/physical): 512B/4096B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 274MB 273MB fat32 EFI system partition hidden 2 274MB 20.8GB 20.6GB ntfs Basic data partition hidden, diag 3 20.8GB 21.1GB 273MB fat32 EFI system partition boot 4 21.1GB 21.3GB 134MB Microsoft reserved partition msftres 5 21.3GB 342GB 320GB ntfs Basic data partition 6 342GB 358GB 16.1GB ext4 Basic data partition 7 358GB 374GB 16.1GB ntfs Basic data partition 8 374GB 640GB 266GB ntfs Basic data partition What is surprising is that there are 2 EFI system partitions on the disk. The sda2 partition is a 20gb recovery partition which loads windows with a basic recovery interface. This is accessible by pressing the "ASSIST" button as opposed to the normal power button. I presume that the sda1 EFI System Partition (ESP) loads into this recovery. The sda3 ESP has more fleshed out entries for Microsoft Windows, which actually goes into Windows 7 (as confirmed by bcdedit.exe on Windows). Ubuntu is installed on sda6, and while installation I chose sda3 as my boot partition. The installer correctly created a sda3/EFI/ubuntu/grubx64.efi application. The real problem: for the life of me, I can't set it to be the default! I tried creating a sda3/startup.nsh which called grubx64.efi, but it didn't help -- on rebooting, the system still boots into windows. I tried using efibootmgr, and that shows as it it worked: root@kubuntu:~# efibootmgr BootCurrent: 0000 BootOrder: 0000,0001 Boot0000* EFI USB Device Boot0001* Windows Boot Manager root@kubuntu:~# efibootmgr --create --gpt --disk /dev/sda --part 3 --write-signature --label "GRUB2" --loader "\\EFI\\ubuntu\\grubx64.efi" BootCurrent: 0000 BootOrder: 0002,0000,0001 Boot0000* EFI USB Device Boot0001* Windows Boot Manager Boot0002* GRUB2 root@kubuntu:~# efibootmgr BootCurrent: 0000 BootOrder: 0002,0000,0001 Boot0000* EFI USB Device Boot0001* Windows Boot Manager Boot0002* GRUB2 However, on rebooting, as you guessed, the machine rebooted directly back into Windows. The only things I can think of are: The sda1 partition is somehow being used Overwrite /EFI/Boot/bootx64.efi and /EFI/Microsoft/Boot/bootmgfw.efi with grubx64.efi [but this seems really radical]. Can anyone please help me out? Thanks -- any help is greatly appreciated, as this issue is driving me crazy!

  Read the article

• Configuring Multi-Tap on Synaptics Touchpad

  - by nunos

  I am having a hard time configuring my notebook's touchpad. The touchpad already works. It successfully responds to one-finger tap, two-finger tap and two-finger vertical scrolling. What I want to accomplish: change two-finger tap action from right-mouse click to middle-mouse click add three-finger tap functionality to yield right-mouse click action (i have checked that the three-finger tap is supported by my laptop's touchpad since it works on Windows) I read on a forum to use this as a guide. I have successfully accomplished point 1 with synclient TapButton2=2. However, I have to do it everytime I log in. I have tried to put that command on /etc/rc.local but the computer always boots and logins with the default configuration. Regarding point 2, I have tried synclient TapButton3=3 but it doesn't do anything when I three-finger tap the touchpad. I am running Ubuntu 11.10 on an Asus N82JV. /etc/X11/xorg.conf: nuno@mozart:~$ cat /etc/X11/xorg.conf Section "InputClass" Identifier "touchpad catchall" Driver "synaptics" MatchIsTouchpad "on" MatchDevicePath "/dev/input/event*" Option "TapButton1" "1" Option "TapButton2" "2" Option "TapButton3" "3" EndSection /usr/share/X11/xorg.conf.d/50-synaptics.conf: nuno@mozart:~$ cat /usr/share/X11/xorg.conf.d/50-synaptics.conf # Example xorg.conf.d snippet that assigns the touchpad driver # to all touchpads. See xorg.conf.d(5) for more information on # InputClass. # DO NOT EDIT THIS FILE, your distribution will likely overwrite # it when updating. Copy (and rename) this file into # /etc/X11/xorg.conf.d first. # Additional options may be added in the form of # Option "OptionName" "value" # Section "InputClass" Identifier "touchpad catchall" Driver "synaptics" MatchIsTouchpad "on" MatchDevicePath "/dev/input/event*" Option "TapButton1" "1" Option "TapButton2" "2" Option "TapButton3" "3" EndSection xinput list: nuno@mozart:~$ xinput list ? Virtual core pointer id=2 [master pointer (3)] ? ? Virtual core XTEST pointer id=4 [slave pointer (2)] ? ? Microsoft Microsoft® Nano Transceiver v2.0 id=12 [slave pointer (2)] ? ? Microsoft Microsoft® Nano Transceiver v2.0 id=13 [slave pointer (2)] ? ? ETPS/2 Elantech Touchpad id=16 [slave pointer (2)] ? Virtual core keyboard id=3 [master keyboard (2)] ? Virtual core XTEST keyboard id=5 [slave keyboard (3)] ? Power Button id=6 [slave keyboard (3)] ? Video Bus id=7 [slave keyboard (3)] ? Video Bus id=8 [slave keyboard (3)] ? Sleep Button id=9 [slave keyboard (3)] ? USB2.0 2.0M UVC WebCam id=10 [slave keyboard (3)] ? Microsoft Microsoft® Nano Transceiver v2.0 id=11 [slave keyboard (3)] ? Asus Laptop extra buttons id=14 [slave keyboard (3)] ? AT Translated Set 2 keyboard id=15 [slave keyboard (3)]

  Read the article

• Configuring Multi-Tap on Synpaptics Touchpad

  - by nunos

  I am having a hard time configuring my notebook's touchpad. The touchpad already works. It succesfully responds to one-finger tap, two-finger tap and two-finger vertical scrolling. What I want to accomplish: change two-finger tap action from right-mouse click to middle-mouse click add three-finger tap functionality to yield right-mouse click action I read on a forum to use this as a guide. I have succesfully accomplished point 1 with synclient TapButton2=2. However, I have to do it everytime I log in. I have tried to put that command on /etc/rc.local but the computer always boots and logins with the default configuration. Regarding point 2, I have tried synclient TapButton3=3 but it doesn't do anything when I three-finger tap the touchpad. I am running Ubuntu 11.10 on an Asus N82JV. /etc/X11/xorg.conf: nuno@mozart:~$ cat /etc/X11/xorg.conf Section "InputClass" Identifier "touchpad catchall" Driver "synaptics" MatchIsTouchpad "on" MatchDevicePath "/dev/input/event*" Option "TapButton1" "1" Option "TapButton2" "2" Option "TapButton3" "3" EndSection /usr/share/X11/xorg.conf.d/50-synaptics.conf: nuno@mozart:~$ cat /usr/share/X11/xorg.conf.d/50-synaptics.conf # Example xorg.conf.d snippet that assigns the touchpad driver # to all touchpads. See xorg.conf.d(5) for more information on # InputClass. # DO NOT EDIT THIS FILE, your distribution will likely overwrite # it when updating. Copy (and rename) this file into # /etc/X11/xorg.conf.d first. # Additional options may be added in the form of # Option "OptionName" "value" # Section "InputClass" Identifier "touchpad catchall" Driver "synaptics" MatchIsTouchpad "on" MatchDevicePath "/dev/input/event*" Option "TapButton1" "1" Option "TapButton2" "2" Option "TapButton3" "3" EndSection xinput list: nuno@mozart:~$ xinput list ? Virtual core pointer id=2 [master pointer (3)] ? ? Virtual core XTEST pointer id=4 [slave pointer (2)] ? ? Microsoft Microsoft® Nano Transceiver v2.0 id=12 [slave pointer (2)] ? ? Microsoft Microsoft® Nano Transceiver v2.0 id=13 [slave pointer (2)] ? ? ETPS/2 Elantech Touchpad id=16 [slave pointer (2)] ? Virtual core keyboard id=3 [master keyboard (2)] ? Virtual core XTEST keyboard id=5 [slave keyboard (3)] ? Power Button id=6 [slave keyboard (3)] ? Video Bus id=7 [slave keyboard (3)] ? Video Bus id=8 [slave keyboard (3)] ? Sleep Button id=9 [slave keyboard (3)] ? USB2.0 2.0M UVC WebCam id=10 [slave keyboard (3)] ? Microsoft Microsoft® Nano Transceiver v2.0 id=11 [slave keyboard (3)] ? Asus Laptop extra buttons id=14 [slave keyboard (3)] ? AT Translated Set 2 keyboard id=15 [slave keyboard (3)]

  Read the article

• Is my computer slow due to lack of swap

  - by Kristian Jensen

  A few months ago, I installed Ubuntu 12.04 alongside with Windows 7 on my Asus EEE-PC 1015bx. It has a tendency of freezing and when trying to investigate I found that a swap partition of only 256 MB had been created. The Asus EEE-PC 1015bx is born with 1 GByte RAM only and it is not possible to add further or exchange the existing 1 GByte with a larger card. When looking at the system monitor, it looks like all swap is being utilized along with 70-75% of the RAM, even with very few applications running. Can the lack of much swap space be the reason for my computer running slowly and at times freezing? How can I add a swap partition? Or should I add a swap file instead? At the moment, I see two partitions when viewing the system monitor: one 28.6 GByte ext4 partition which must be the one containing Ubuntu and one 100 GByte fuseblk partition which I assume is the one holding Windows. It shows that I have 18.6 GByte free space on the ext4 partition. Can I "take a bite" from the ext4 partition and convert this into a swap partition? I was thinking something like 3 GBytes for swap considering my limited RAM. I hope that someone can guide me through. Thank you. 20th Oct 2012 - Further details Thank you for below answer which I find very useful. I am certainly considering switching to one of your suggested shells as I can see from the Internet that many have posted that these require much fewer resources than ubuntu. It seems to me that lubuntu is the perfect match for my very limited computer. I will have to wait a few days, though, as I am presently limited by a very slow and restricted Internet connection via satellite. But will lubuntu install as simply another shell replacing unity or will it replace ubuntu all together? Will the software that I have installed under ubuntu still be accessible in lubuntu? And can I return to ubuntu if required? Regarding the actual question of swap: When I run gparted, it shows me that there is one ntfs partition of 100 GBytes from where it boots and the before mentioned ext4 partition of 28.6 GBytes is not mentioned. Could it be that my ubuntu installation resides inside this 100 GBytes ntfs partiotion? And if so, can I take a bite of this for my swap partition? Realising that gparted is shown in Danish, I hope that you can make out what I mean. System monitoring shows below details: Once again I sincerely hope that you can help. Thank you.

  Read the article

• permanently load module

  - by Radu

  I have a Compaq Presario CQ-61 320SQ, I am using Ubuntu 10.04 because after update to 10.10 my mouse and touchpad won't work, network won't work, sound won't work ... (I managed to fix most of them after almost a month of googling, but not all, my 2 Desktops have no problem with 10.10) so I decided to switch back to 10.04, where I have a problem: My broadband speed is very low beacause of the kernel module r8169, I downloaded the good module r8101 and every time the computer boots have a rc.local entry to fix this. Question: Can I load the modul permanently from a specific location. I heard about /etc/modules but there I need the module name, but I have to load it from a specific path (where is the default path for that) Thank you. So I studied the script: It creates the file r8101.ko in /lib/modules/uname -r/kernel/drivers/net so I think as long as nobody will delete that file, and I don't update the kernel, maybe adding r8108 to /etc/modules will work, and add r8169 to blacklist ... I will give it a try. EDIT2: So I added r8101 to /etc/modules and blacklist r8169 to /etc/modprobe.d/blacklist.conf It still uses the old module, lsmod prints: radu@adu:~$ lsmod | grep r8 r8101 67626 0 r8169 34108 0 mii 4381 1 r8169 EDIT: the module is loaded using this script that came with it: #!/bin/sh # invoke insmod with all arguments we got # and use a pathname, as insmod doesn't look in . by default TARGET_PATH=/lib/modules/`uname -r`/kernel/drivers/net echo echo "Check old driver and unload it." check=`lsmod | grep r8169` if [ "$check" != "" ]; then echo "rmmod r8169" /sbin/rmmod r8169 fi check=`lsmod | grep r8101` if [ "$check" != "" ]; then echo "rmmod r8101" /sbin/rmmod r8101 fi echo "Build the module and install" echo "-------------------------------" >> log.txt date 1>>log.txt make all 1>>log.txt || exit 1 module=`ls src/*.ko` module=${module#src/} module=${module%.ko} if [ "$module" == "" ]; then echo "No driver exists!!!" exit 1 elif [ "$module" != "r8169" ]; then if test -e $TARGET_PATH/r8169.ko ; then echo "Backup r8169.ko" if test -e $TARGET_PATH/r8169.bak ; then i=0 while test -e $TARGET_PATH/r8169.bak$i do i=$(($i+1)) done echo "rename r8169.ko to r8169.bak$i" mv $TARGET_PATH/r8169.ko $TARGET_PATH/r8169.bak$i else echo "rename r8169.ko to r8169.bak" mv $TARGET_PATH/r8169.ko $TARGET_PATH/r8169.bak fi fi fi echo "Depending module. Please wait." depmod -a echo "load module $module" modprobe $module echo "Completed." exit 0

  Read the article

• links for 2011-01-06

  - by Bob Rhubart

  Coming to your town: Oracle Enterprise Cloud Summit During these full-day events, cloud experts will share real-world best practices, reference architectures, detailed customer case studies, and more. Events scheduled in cities around the world.  (tags: oracle otn cloud event) Webcast: Security and Compliance for Private Cloud Consolidation Roxana Bradescu, Senior Director for Oracle Database Security Products, discusses Oracle Database Security Solutions to securely consolidate data and meet compliance requirements within private cloud computing environments. Thursday, January 13, 2011. 10am PST | 1pm EST (tags: oracle cloud security) Answering Questions about Mobile Devices | The AppsLab "How do the numbers of Android and iOS users compare? How often are people switching? Where are all these BlackBerry and Nokia users? Do they plan to jump to Android or iOS? What about webOS? Is it relevant?" Some answers in this AppsLab survey. (tags: oracle otn enterprise2.0 mobilecomputing iphone blackberry android) Webcast: Achieve 24/7 Cloud Availability Without Expensive Redundancy Ashish Ray and Matthew Baier discuss Oracle’s Maximum Availability Architecture and Oracle Database 11g. (tags: oracle cloud highavailability webcast) Converting a PV vm back into an HVM vm (Wim Coekaerts Blog) "I wanted to convert one of my VMs that was based on a paravirt kernel into a vm that just boots as a regular hardware virt VM with a standard x86-64 kernel...It took me a little while to figure out the fastest way so now that I have it pretty much down I wanted to share the steps." - Wim Coekaerts (tags: oracle otn virtualization oraclevm) @OTN_Garage: Resources for VirtualBox 4.0 Rick "@OTN_Garage" Ramsey shares links to several resources for those with a VirtualBox jones. (tags: oracle otn virtualization virtualbox) 'Federal Service Bus' Helps Belgian Government Speak a Common Language - SOA in Action Blog "The first SOA-enabled application was developed in less than two months and was fully operational in approximately 10 weeks. In addition, new FSB modules are reusable for other Belgian e-government applications, saving both time and taxpayer dollars." - Joe McKendrick (tags: soa oracle) Show Notes: Architects in the Cloud (ArchBeat Podcast) The complete 4-part interview with Stephen G. Bennett and Archie Reed, the authors of "Silver Clouds, Dark Linings: A Concise Guide to Cloud Computing," is now available. (tags: oracle otn cloud podcast archbeat)

  Read the article

• Sony VAIO is booting directly into Windows without showing grub

  - by Rohan Dhruva

  I bought a new Sony Vaio S series laptop. It uses Insyde H2O BIOS EFI, and trying to install Linux on it is driving me crazy. root@kubuntu:~# parted /dev/sda print Model: ATA Hitachi HTS72756 (scsi) Disk /dev/sda: 640GB Sector size (logical/physical): 512B/4096B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 274MB 273MB fat32 EFI system partition hidden 2 274MB 20.8GB 20.6GB ntfs Basic data partition hidden, diag 3 20.8GB 21.1GB 273MB fat32 EFI system partition boot 4 21.1GB 21.3GB 134MB Microsoft reserved partition msftres 5 21.3GB 342GB 320GB ntfs Basic data partition 6 342GB 358GB 16.1GB ext4 Basic data partition 7 358GB 374GB 16.1GB ntfs Basic data partition 8 374GB 640GB 266GB ntfs Basic data partition What is surprising is that there are 2 EFI system partitions on the disk. The sda2 partition is a 20gb recovery partition which loads windows with a basic recovery interface. This is accessible by pressing the "ASSIST" button as opposed to the normal power button. I presume that the sda1 EFI System Partition (ESP) loads into this recovery. The sda3 ESP has more fleshed out entries for Microsoft Windows, which actually goes into Windows 7 (as confirmed by bcdedit.exe on Windows). Ubuntu is installed on sda6, and while installation I chose sda3 as my boot partition. The installer correctly created a sda3/EFI/ubuntu/grubx64.efi application. The real problem: for the life of me, I can't set it to be the default! I tried creating a sda3/startup.nsh which called grubx64.efi, but it didn't help -- on rebooting, the system still boots into windows. I tried using efibootmgr, and that shows as it it worked: root@kubuntu:~# efibootmgr BootCurrent: 0000 BootOrder: 0000,0001 Boot0000* EFI USB Device Boot0001* Windows Boot Manager root@kubuntu:~# efibootmgr --create --gpt --disk /dev/sda --part 3 --write-signature --label "GRUB2" --loader "\\EFI\\ubuntu\\grubx64.efi" BootCurrent: 0000 BootOrder: 0002,0000,0001 Boot0000* EFI USB Device Boot0001* Windows Boot Manager Boot0002* GRUB2 root@kubuntu:~# efibootmgr BootCurrent: 0000 BootOrder: 0002,0000,0001 Boot0000* EFI USB Device Boot0001* Windows Boot Manager Boot0002* GRUB2 However, on rebooting, as you guessed, the machine rebooted directly back into Windows. The only things I can think of are: The sda1 partition is somehow being used Overwrite /EFI/Boot/bootx64.efi and /EFI/Microsoft/Boot/bootmgfw.efi with grubx64.efi [but this seems really radical]. Can anyone please help me out? Thanks -- any help is greatly appreciated, as this issue is driving me crazy!

  Read the article

• how to start LXDE session automatically after tightvncserver starts to make me able see desktop when connecting to the host via vncclient?

  - by Oleksandr Dudchenko

  I have system which is equipped with Intel Celeron processor 1.1 GHz s370 with 384 Mb of RAM on Intel d815egew motherboard which supports wake-on-lan function. I want to use such a PC for Internet sharing to the local network. Also this PC is a DHCP+DNS server as well as router/gateway. Based on above I decided to install Lubuntu as it is lightweight system. I installed Lubuntu 10.04.4 LTS from alternate ISO. System has no auto login. System boots and has acceptable performance. Host PC has onboard 4 network adapters: eth0 – ethernet controller which is used for Local Network connections. Has static address 10.0.0.1 eth1 – ethernet controller which is not used and not configured so far, I plan to connect printer here later on. eth2 - ethernet controller which is used to connect to Internet, which we plan to share for the local network wlan0 – wireless controller, it is used in role of access poit for local Network and has address 10.0.0.2 We want to control our gateway remotely. So, we need to be able to power it on remotely. To allow this I’ve done the following things: $ cd /etc/init.d/ made a new file with command $ sudo vim wakeonlanconfig Wrote the following lines to the newly created file, saved and closed it #!/bin/bash ethtool -s eth0 wol g ethtool -s eth2 wol g exit Made the abovementioned file executable $ sudo chmod a+x wakeonlanconfig Then included it into autostart sequence during boot. $ sudo update-rc.d -f wakeonlanconfig defaults after system reboot we will be able to poweron system remotely. Than we need to have a possibility to connect remotely to the host via SSH and VNC. So, I installed following packets with the following commands: $ sudo apt-get update $ sudo apt-get install openssh-server tightvncserver Add ssh daemon into autostart sequence during boot. $ sudo update-rc.d -f ssh defaults Power off the host PC $ sudo halt Then I went to remote place, send magic paket and powered the Host up. System started... And I connected to the host via Putty from remote system under Windows. Than logged in and run the command to start vnc server. $ tightvncserver -geometry 800x600 -depth 16 :2 VNC server successfully started and I got message like follows. New 'X' desktop is gateway:2 Starting applications specified in /home/dolv/.vnc/xstartup Log file is /home/dolv/.vnc/gateway:2.log Using UltraVNC Viewer programm under windows I connected to the host's vnc server, enterd the password and.... sow only mouse cursor in form of cross on a grey background of 800x600 dots, no desktop. Here is my .vnc/xstartup file #!/bin/sh xrdb $HOME/.Xresources xsetroot -solid grey #x-terminal-emulator -geometry 80x24+10+10 -ls -title "$VNCDESKTOP Desktop" & #x-window-manager & # Fix to make GNOME work export XKL_XMODMAP_DISABLE=1 /etc/X11/Xsession The Question: What I have to change and where to make LXDE session start automatically after tightvncserver starts?

  Read the article

• HighPoint RocketRAID 62x Controller

  - by TeXnewbie

  I have the subject card recently installed in Ubuntu 12.04.1 LTS (GNU/Linux 3.2.0-31-generic x86_64). See partial lspci -vv listing below (complete listing played havoc with pre tags): 03:00.0 RAID bus controller: HighPoint Technologies, Inc. Device 0622 (rev 01) Subsystem: HighPoint Technologies, Inc. Device 0001 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at 9c00 [size=8] Region 1: I/O ports at 9800 [size=4] Region 2: I/O ports at 9400 [size=8] Region 3: I/O ports at 9000 [size=4] Region 4: I/O ports at 8c00 [size=16] Region 5: Memory at fdbff000 (32-bit, non-prefetchable) [size=2K] Expansion ROM at fdbe0000 [disabled] [size=64K] Capabilities: I followed instructions I found at https://help.ubuntu.com/community/RocketRaid to compile the drivers for it, and although performing the process described there seemed to work fine with no noticeable errors, when I rebooted after performing that procedure I could not boot. During dkms steps, I noticed messages indicating that (If next boot fails, revert to initrd.img-3.2.0-31-generic.old-dkms image) update-initramfs................ so I booted using a Ubuntu 12.10 LiveDVD and reverted to the old-dkms initrd.img as suggested above, but this failed to repair the boot problem. Ultimately, I used https://help.ubuntu.com/community/Boot-Repair in Ubuntu-Secure-Remix to fix the boot problem and was able to boot normally again, but now with the newly generated initrd.img in place again (which now boots normally), when I modprobe the rr62x kernel module, I immediately get a hard crash with messages to console about a kernel paging request that seems to have caused the problem. I've tried on multiple occasions now to use the newly built kernel module so as to allow me to use an eSATA port multiplier plugged into the card, but to no avail. Any suggestions on fixes or workarounds (I've read that some of the HighPoint cards (2720SGL) seem to work as a host bus adapter and thus may not need a custom driver, but that seems not to be the case for mine) would be most appreciated. My goal is to use the card as described here and with software RAID mdadm utilities. If necessary, I can hand-copy the console messages after the hard crash into a follow-up message, but I obviously can't do a cut/paste. I'll gladly provide any other details that are needed, but not sure what those would be at this point, so I'll refrain from adding other details for now. Thanks in advance for any help.

  Read the article

• Ubuntu Install 11.10 doesn't recognize Windows 7 installation with new HDD

  - by arlendo

  Replaced my crashed HDD with a Seagate 2TB Sata (bought from a company who pulled it from a working computer, OS unknown) and did a fresh install of Windows 7. Windows shows 100MB boot partition (bootable NTFS) and 200GB Windows partition (NTFS), the rest is unallocated. Win7 Disk Management says the partitioning type is Master Boot Record. Win7 boots and runs fine. Ubuntu 11.10 Install procedes to Allocate Drive Space screen and should say This computer currently has Windows 7 on it. What would you like to do? Instead, it says something like Install doesn't detect any existing OS on this computer. When I click on Something else, the partition table shows only the unallocated space of 1.8TB. Ubuntu Disk Utility says Partitioning: Master Boot Record, but GParted Live says Partition Table: gpt. It was my original intention to have the Windows boot partition and application partition, then install Ubuntu 11.10 using boot, root, swap, and home partitions, and maybe another partition just for data (mostly photos). Currently, I would be happy if I could just get Ubuntu installed along with Win7. I am aware of the MBR limits of 3 Primary partitions and 1 Extended partition. I suspect that my new HDD is partitioned for GPT and that is why Ubuntu can't see the Win7 installation. Am I on the right track? I was going to use Windows Disk Management to convert GPT to MBR but I only have the one drive on my AMD-64 mini-computer and it says I have to empty the drive of all partitions before I can access the Convert command. And I can't find any bootable software that would allow me to do that conversion. Here is the result of sudo fdisk -l: ubuntu@ubuntu:~$ sudo fdisk -l WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 2000.4 GB, 2000398934016 bytes 224 heads, 19 sectors/track, 918004 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xd4a68c18 Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 419637247 209715200 7 HPFS/NTFS/exFAT ubuntu@ubuntu:~$ Keep in mind that I'm a definite newbie to screwing around with the inner workings of Ubuntu. I previously had Ubuntu 10.04 running with Vista and I don't remember even having to partition anything that wasn't automatic in the install. Thanks for taking a look here. My Win7 is running fine but I miss my Ubuntu.

  Read the article

• Failed 12.04 installation

  - by Rob Sayer

  I tried installing Ubuntu 12.04 today. Not an upgrade, a new installation. It didn't work. My computer specs: Computer: Compaq presario CQ-104CA OS: Windows 7 Home 64 bit CPU: AMD V140 BIOS: latest Graphics: amd m880g with ati mobility radeon hd 4250 Wireless: atheros ar9285 Internal HD:SATA I wasn't connected to the internet at the time ... I know of a number of people who have installed ubuntu unconnected and just updated later. It seemed to go normally until I got to the part where I chose to install dual boot linux/windows. Then, the screen went black and the following test appeared (I left out the [OK]'s): checking battery state starting crash report submission daemon stating cpu interrupts balancing daemon stopping system V runlevel compatibility starting configure network device security stopping configure network device security stopping cold plug devices stopping log initial device creation starting enable remaining boot-time encrypting devices starting configure network device security starting save udev log and update rules stopping save udev log and update rules stopping enable remaining boot-time encrypted block devices checking for running unattended-upgrades acpid: exiting speech-dispatcher disabled: edit /etc/default/speech-disorder At this point, the CD is ejected. Then nothing. If I press the return key, it boots Windows. I don't think that's what's supposed to happen. Thinking the cd media or dvd drive may have been faulty, I downloaded the .iso again and made a bootable USB stick, as per your instructions. This time there was no cryptic crash screen. It just booted windows. I can't find any log files it may have left. Thinking the amd64 version may have been the wrong one, I tried downloading the x86 version. Same thing, both from cd and usb drive. Note I downloaded both files twice. I doubt it was a corrupted d/l. This is supposed to be a simple, transparent install. I went to the time and trouble of looking up my devices and drivers re ubuntu beforehand, and was prepared to do some configuration, though I know someone who has the same wireless device and his worked righted out of the box. But I spent over 3 hours trying to install it with only the above to show for it.

  Read the article

• Booting Ubuntu on HP Pavilion g7 - 13.04 [duplicate]

  - by death2040

  This question already has an answer here: My computer boots to a black screen, what options do I have to fix it? 24 answers I have a HP Pavilion G7 with an AMD A4 processor and Radeon graphics. I want to install Ubuntu on my laptop but whenever I put the Ubuntu live CD in it and boot to it, the screen shows the Ubuntu logo and the four little dots then after about a minute or two the screen goes black. I can tell the screen is still on but it doesn't have anything on it. I'm beginning to wonder if its a driver problem but I can't really install the drivers when I cant even get Ubuntu to show anything except a loading screen. I've already tried using 12.04 and 12.10 and all the others down to Ubuntu 10. none of them worked. All the other versions don't even show the Ubuntu logo. I'd prefer to have Ubuntu 13.04 on it if its possible but I haven't had any luck finding a solution. I've also tried using WUBI installer in Windows 7 but all that did was make my computer slower for windows and it does the same with the screen when i boot it to Ubuntu. I'm trying to use Ubuntu alongside Windows 7. I cant find any solution on Google. It wont load anything and I know that there is a program called grub on Ubuntu that I used on my desktop computer when it had graphics trouble but the trouble with my desktop was minor things like the screen would flash and then show weird patterns on the screen. But I can't find anything on what to do with the HP laptop. Please help. I use this laptop a lot for games on Windows 7 and I just want to use Ubuntu for when I take my laptop to school and for school stuff. Edit: I just tried booting it in nomodeset and some other things and still didn't work. It did boot up but now when it goes to install alongside windows it crashes and says Ubuntu is forcing reboot or something like that Also, this question is different from the black screen at boot issue because when I do use nomodeset on my computer and select install Ubuntu it will go as far as the screen where you can choose to replace Windows or run alongside Windows. Then after I click continue it ejects the live CD and turns off my computer without installing anything. The error message it shows when it ejects the disk says signal 15, shutting down - modem manager [1675]: <info> Caught nm-dispatcher.action: Caught signal 15, shutting down... *Deconfiguring network interfaces... Please remove installation media and close the tray (if any) then press ENTER *Deactivating swap... *Stopping remaining crypto disks... *stopping early crypto disks... unmount: /run/lock: not mounted unmount: /run/shm: not mounted

  Read the article

• New computer hangs on shutdown/reboot, how to troubleshoot?

  - by torbengb

  Summary: My machine hangs on shutdown/restart: all windows and the menu bar disappear but the desktop wallpaper remains, and it stays like that without disk activity forever (hours). It doesn't even show the shutdown screen (the one with the animated dots) where I could hit ESC and watch the shutdown text. How can I troubleshoot this? Details: I've just received a new nettop computer (Acer Aspire Revo 3700: CPU:Atom D525, GPU:Nvidia ION2). I've just made a clean install of Ubuntu 10.10 using the standard USB pendrive method. The machine boots okay and works OK including WLAN and audio, but the graphics are not OK. Ubuntu offered to install&activate the current recommended Nvidia driver, but the machine hangs on shutdown/restart which prevents the installation of the proper Nvidia driver. I have to cycle the power to reboot. I ran the Update Manager in the hope that the updates would fix the hang-up. At the end of the update-installation it asked to reboot - and got stuck just like before. I see no obvious cause of the freeze and I don't know if it's caused by graphics problems or anything else. The only USB attachment is a mouse/keyboard; I don't have any external storage attached; and I don't have any programs running (the machine freezes even when doing restart right after login). How can I determine what is causing the freeze? How can I fix this? I'm frankly rather disappointed because I bought this new machine in the hopes of getting the graphics to work, which failed miserably on my old machine, even though Ubuntu is supposed to be good with Nvidia. Being a fresh convert from Windows, I was hoping for a happier experience this time, so I'm very much looking forward to your suggestions! ... After posting this question, I see related questions in the right sidebar: this, this, and this. Don't know why these didn't show up while I composed by question. Those questions suggest some ACPI settings but I am not experienced enough to find/change those settings. I'll try the sudo shutdown -h now command when I get home and see if that works, then update this question. I did check the system BIOS but didn't see anything out of the ordinary.

  Read the article

• Ubuntu 13.04 boot into black screen, even after installing nvidia drivers, fail at: "Starting Reload cups, upon starting avahi-daemon..."

  - by Elad92

  I got a new machine with i7 4770k and gefore gtx660. I installed windows and then installed Ubuntu 13.04. In the installation everything went well, after the installation I again boot from the USB and choose try ubuntu, and installed boot-repair because windows automatically boot with no option for ubuntu. After I repaired the boot, I restarted and got into grub, when I chose Ubuntu I got message saying I'm running on low graphics mode and when I pressed ok the screen turned off. I couldn't do anything so I restarted and after reading this post: My computer boots to a black screen, what options do I have to fix it? I got into recovery, selected dpkg and repaired packages. Then I rebooted, and tried to press 'e' and change quiet splash to no splash and nomodeset but unfortunately both of them didn't work, and not the screen didn't get turned off, but I just saw a blank screen. So I rebooted again, entered the recovery, and this time I went to the root shell, and tried to install nvidia drivers from this guide here: http://www.howopensource.com/2012/10/install-nvidia-geforce-driver-in-ubuntu-12-10-12-04-using-ppa/ I rebooted and got the same black screen again (the screen didn't go off, just saw a blank screen). In the grub I see that the kernel is 3.8.0-25. I also checked that the usb files are not corrupted using the check CD from the ubuntu installation screen. I'm really frustrated, I don't know what else can I do. (If someone also knows how can I connect to wifi using the root shell it will be very appreciated, because when I choose the 'enable networking' it again booting me to a black screen. Thanks Edit After digging more, I again boot with nomodeset and saw where is it failing, this is the lines I saw: * Starting Reload cups, upon starting avahi-daemon to make sure remote queues are populated [OK] * Starting Reload cups, upon starting avahi-daemon to make sure remote queues are populated [fail] I searched for it in google and this is the closest result I got: http://ubuntuforums.org/showthread.php?t=2144261 i didn't find any way to solve it in the internet, from what I understand this is a problem with 13.04. If someone knows how to fix it I will be very grateful. Thanks Edit 2 - 23.6.13 As Mitch suggested, I disabled the avahi-daemon, and when I boot in nomodeset I get the following error: What else can be the problem?

  Read the article

• I can't install Ubuntu 12.04.1 on iMac G5

  - by user89004

  So, I have this iMac G5 that doesn't have iSight, only a small light sensor I think undernieth, machine model 8.2. I tried burning a Ubuntu 12.04.1 PowerPC 64bit .iso to a cd but the computer just won't boot it, I don't know why. Next I tried with a USB but it wouldn't let me boot that either, I created the usb on my dad's win7 laptop as the process was way easier than on freakin Mac or Ubuntu (no command typing AT ALL on windows) I'm able to get into openfirmware and type boot usb and it does show some weird writing that scrolls so fast I can't see anything and then it just gives me this huge no sign like a stop sign and freezez. The sign is grey and the line in the middle is tilted towards the left. An other issue I'm having with hdiutil is that I can't convert the stupid .iso I just downloaded into a .img because the file keeps on dissapearing right when it's done converting it. I used the syntax from Ubuntu support how to create a bootable usb drive under Mac OS X. I even didn't include the 2 stupid ~ that are shown in the syntax that are completly worthless, God only know why they put them there, and I even tried running the whole thing as root with sudo su before the command. The funny thing is that if I convert something smaller it works. The command I was using is hdiutil convert -format UDRW -o /path/to/target.img /path/to/ubuntu.iso I even tried hdiutil convert /path/to/ubuntu.iso -format UDRW -o /path/to/target.img but the same thing happens, the dummy .img.dmg file dissapears when the conversion is done no matter where I set the output file to go. I have tried several different folders, the same thing happens with all of them. I also tried burning a Ubuntu mini iso on a cd, can't remember if it was 11.10 or 12.10 but even thoguh holding c when the iMac boots up does show me the cd and I can boot from it, I get this weird error upon hitting install, it says something like invalid memory access, release keys and error strings I can't read. I don't have any original DVDs from this iMac and can't run hardware diagnostics. WHatever option I try at the command prompt from the mini ubuntu cd I get the same result, error code and openfirmware backdrop that's frozen. I noticed that the pen drive I created on my dads Win7 laptop is formated with MS-DOS but I can still mount it no problem, so it shouldn't have a problem booting it, right? I used the advice on ubuntu.com to make it, from here. Also, my partition is HFS+ so I can't use it as a hard drive and boot from it. I don' have 2 partitions either, just one HDD, one partition. Please help!!!

  Read the article

• Setting up port forwarding for 7000 appliance VM in VirtualBox

  - by uejio

  I've been using the 7000 appliance VM for a lot of testing lately and relied on others to set up the networking for the VM for me, but finally, I decided to take the dive and do it myself.  After some experimenting, I came up with a very brief number of steps to do this all using the VirtualBox CLI instead of the GUI. First download the VM image and unpack it somewhere.  I put it in /var/tmp. Then, set your VBOX_USER_HOME to some place with lots of disk space and import the VM: export VBOX_USER_HOME=/var/tmp/MyVirtualBoxVBoxManage import /var/tmp/simulator/vbox-2011.1.0.0.1.1.8/Sun\ ZFS\ Storage\ 7000.ovf (go get a cup of tea...) Then, set up port forwarding of the VM appliance BUI and shell:First set up port as NAT:VBoxManage modifyvm Sun_ZFS_Storage_7000 --nic1 nat Then set up rules for port forwarding (pick some unused port numbers):VBoxManage modifyvm Sun_ZFS_Storage_7000 --natpf1 "guestssh,tcp,,4622,,22"VBoxManage modifyvm Sun_ZFS_Storage_7000 --natpf1 "guestbui,tcp,,46215,,215" Verify the settings using:VBoxManage showvminfo Sun_ZFS_Storage_7000 | grep -i nic Start the appliance:$ VBoxHeadless --startvm Sun_ZFS_Storage_7000 & Connect to it using your favorite RDP client.  I use a Sun Ray, so I use the Sun Ray Windows Connector client: $ /opt/SUNWuttsc/bin/uttsc -g 800x600 -P <portnumber> <your-hostname> & The portnumber is displayed in the output of the --startvm command.(This did not work after I updated to VirtualBox 4.1.12, so maybe at this point, you need to use the VirtualBox GUI.) It takes a while to first bring up the VM, so please be patient. The longest time is in loading the smf service descriptions, but fortunately, that only needs to be done the first time the VM boots.  There is also a delay in just booting the appliance, so give it some time. Be sure to set the NIC rule on only one port and not all ports otherwise there will be a conflict in ports and it won't work. After going through the initial configuration screen, you can connect to it using ssh or your browser: ssh -p 45022 root@<your-host-name> https://<your-host-name>:45215 BTW, for the initial configuration, I only had to set the hostname and password.  The rest of the defaults were set by VirtualBox and seemed to work fine.

  Read the article

• Dual-boot computer won't boot without external hard drive

  - by FrankP

  I have Ubuntu loaded on my external HDD. I tried to unplug the external drive so that this way I could run Windows as the default OS to boot when the computer turns on, but it gives me an error. I need to know how I can make it so that when my computers boots it stops saying Error: no such device: (a whole bunch of numbers and letters) then it says grub rescue>_. If I plug the external HDD in, and I let Ubuntu run the boot process, then it gives me a list of OS's/ HDD's to choose from and Windows 7 is there. The only problem is that I want Windows be my default OS, not the other way around. P.S. I have found that I dislike Ubuntu because I can't even figure out how to install the necessary programs to learn how to start writing Ruby On Rails. So installing it was a waste of my time, in my opinion. Now that I have it on the external hard drive, I will leave it installed though. I just dont want to have to keep that external drive plugged in to my computer all the time. Thank you a ton to whoever can help me! Thank you for the detail'd instructions. I am doing my best to follow you and it makes sense when I read it but, Rescatux is not doing what you said it would. None of the options you said would appear are not there. On my screen there is 4 options when MBR run's none look familiar and when I picked the best possible option based on my educated guesses it said success. I tried to restart my computer and it said Please insert windows recovery disc and hit enter. Problem being I don't have the windows recovery disc. I bought my computer from a local Computer tec and he loads windows on it for you. I have no time to run my compute over to him as sunday is my only day free. I think that I just wrecked my computer in the process of this attempted fix windows refuses to boot now WITH or WITHOUT the HDD. Please help this is getting out of hand

  Read the article

• Should I install ubuntu on USB instead of HDD dual-boot?

  - by user2147243

  I had Ubuntu 12.04 installed as dual-boot OS on top of Vista on my laptop. Hacked the grub settings to default to Vista (instead of the default Ubuntu -- pain) on startup, and all was OK for occasional Ubuntu use for past 6 months. Then last week I got a strange message about 'lack of disk space' (~50MB free) when installing pxyplot, even though there was still about 6GB free disk space when I checked later. Then today the Ubuntu wouldn't load at all, and checking the HDD partitions in Vista it looked like the 15GB Ubuntu partition was now three smaller partitions! So, I got rid of those partitions and expanded the Vista partition to use the reclaimed space. Now can't restart ('grub rescue' appears and doesn't 'rescue' anything), so I'll have to do a boot recovery using a Vista installation CD. (Not a particularly user-friendly failure mode of the dual-boot installation!) I now have to decide to either a) try installing ubuntu on the HDD again, but don't want to stuff up my Vista ever again, as that is my most used OS, or b) install Ubuntu on a 16GB USB 3.0 stick. Apparently performance from USB won't be as good as from HDD, and running OS from USB stick does lots of r/w so the stick may fail after a few years! Perhaps installing Ubuntu on live USB and setup to then run in RAM would alleviate the performance/USB lifespan problems? If I create a live-USB for Ubuntu OS, will it boot off that when I restart the laptop with it plugged in? Or will I have to change the laptop setting for boot-order whenever I want to boot Ubuntu instead of Vista (that would be even more painful than the grub default boot order putting Ubuntu ahead of the existing Vista OS!) -- update: I recovered my Vista setup using Iolo SystemMechanic Disaster Recovery Tool, and created a bootable USB of Ubuntu 13.10 on an 8GB USB3.0 pendrive, with 4GB of 'persistence' to allow saving of settings, install some packages etc. It worked OK for a couple of test boots, but once I changed the time and desktop wallpaper, the next Ubuntu reboot crashed and I then couldn't get it to boot successfully. So I decided to install Ubuntu 12.04 LTS as a dual-boot again, but this time instead of partitioning the HDD and installing from an ISO DVD I used the wubi.exe tool to install Ubuntu as a dual-boot. Worked very well, although one oddity was that, despite asking how big the make the partition (20GB), the installed Ubuntu appears to be happily installed somewhere within the Vista NTFS file system (no partition shows up in Windows disk manager, and in Ubuntu disk management tool the entire 133 GB of HDD is showing, with ~40GB free space). A nice feature of installing the dual-boot using wubi is that the laptop now uses Windows boot manager on startup, with Vista as the default OS and Ubuntu happily listed as second on the list. So far so good.

  Read the article

< Previous Page | 29 30 31 32 33 34 35 36 37 38 39 40  | Next Page >