Search Results

Search found 10744 results on 430 pages for 'yes'.

Page 33/430 | < Previous Page | 29 30 31 32 33 34 35 36 37 38 39 40  | Next Page >

• bind9 named.conf zones size limit

  - by mox601

  I am trying to set up a test environment on my local machine, and I am trying to start a DNS daemon that loads tha configuration from a named.conf.custom file. As long as the size of that file is like 3-4 zones, the bind9 daemon loads fine, but when i enter the config file i need (like 10000 lines long), bind can't startup and in the syslog i find this message: starting BIND 9.7.0-P1 -u bind Jun 14 17:06:06 cibionte-pc named[9785]: built with '--prefix=/usr' '--mandir=/usr/share/man' '--infodir=/usr/share/info' '--sysconfdir=/etc/bind' '--localstatedir=/var' '--enable-threads' '--enable-largefile' '--with-libtool' '--enable-shared' '--enable-static' '--with-openssl=/usr' '--with-gssapi=/usr' '--with-gnu-ld' '--with-dlz-postgres=no' '--with-dlz-mysql=no' '--with-dlz-bdb=yes' '--with-dlz-filesystem=yes' '--with-dlz-ldap=yes' '--with-dlz-stub=yes' '--with-geoip=/usr' '--enable-ipv6' 'CFLAGS=-fno-strict-aliasing -DDIG_SIGCHASE -O2' 'LDFLAGS=-Wl,-Bsymbolic-functions' 'CPPFLAGS=' Jun 14 17:06:06 cibionte-pc named[9785]: adjusted limit on open files from 1024 to 1048576 Jun 14 17:06:06 cibionte-pc named[9785]: found 1 CPU, using 1 worker thread Jun 14 17:06:06 cibionte-pc named[9785]: using up to 4096 sockets Jun 14 17:06:06 cibionte-pc named[9785]: loading configuration from '/etc/bind/named.conf' Jun 14 17:06:06 cibionte-pc named[9785]: /etc/bind/named.conf.saferinternet:1: unknown option 'zone' Jun 14 17:06:06 cibionte-pc named[9785]: loading configuration: failure Jun 14 17:06:06 cibionte-pc named[9785]: exiting (due to fatal error) Are there any limits on the file size bind9 is allowed to load?

  Read the article

• Bypassing SQUID on freebsd with PF

  - by epema

  I have PF+SQUID31 on FREEBSD-9.0, and I want to have some hosts(aka goodguys) to bypass the proxy, so that torrents are not logged. Also, I am not sure about transparent. It means that I dont have to configure proxy settings on the client side right? I have tried doing a redirect no rdr on $int_if inet proto {tcp,udp} from 192.168.1.233/32 to any However, no luck :( Here is a quick look of my conf files: SQUID /usr/local/etc/squid/squid.conf http_port 192.168.1.1:8080 transparent RC /etc/rc.conf: gateway_enable="YES" pf_enable="YES" pf_rules="/usr/local/etc/pf.conf" pflog_enable="YES" squid_enable="YES" I have squid31 installed from ports with SQUID_PF "Enable transparent proxying with PF" on PF /usr/loca/etc/pf.conf: int_if="re0" ext_if="bge0" localnet="{ 192.168.1.0/24 }" table <goodguys> const { "192.168.1.219", "192.168.1.233" } set block-policy drop set skip on lo0 scrub in all fragment reassemble scrub out all random-id max-mss 1440 block in on $ext_if pass out on $ext_if keep state block in on $int_if pass in on $int_if inet proto tcp from $int_if:network to $int_if port 8080 keep state pass in on $int_if inet proto udp from $int_if:network to $int_if port 21 keep state pass in on $int_if inet proto udp from $int_if:network to $int_if port 22 keep state pass in on $int_if inet proto udp from $int_if:network to $int_if port 53 keep state pass in on $int_if inet proto tcp from $int_if:network to any port { smtp, pop3 } keep state pass in on $int_if inet proto icmp from $int_if:network to $int_if keep state pass out on $int_if keep state What lines should I add in conf files? I am assuming that the problem is on the firewall(pf).

  Read the article

• Set proper rights for sshfs mountpoint so it can be shared with samba

  - by CS01

  I have a domain hoster that provides access via SSH. My platforms are: Gentoo 2.6.36-r5 Windows (XP/Vista/7) I work on my Windows, I use Gentoo to do all the magic Windows can't do. Therefore I use sshfs to mount the remote public directory for my domain to /mnt/mydomain.com. Authentication is done via keys, so lazy me don't have to type in my password every now and then. Since I do my coding on Windows, and I don't want to upload/download the changed files all the time, I want to access this /mnt/mydomain.com via a samba share. So I shared /mnt in samba, all mounts except mydomain.com is listed on my Windows Explorer. My theories are: sshfs does not set the mountpoint uid/gid to something that samba expects samba does not know that it has to include the uid/gid that /mnt/mydomain.com has been set. All above is wrong, and I don't know. Here are configs and output from console, need anything else just let me know. Also no errors or warnings that I take notice of being relevant to this issue, but I might be wrong. gentoo ~ # ls -lah /mnt total 20K drwxr-xr-x 9 root root 4.0K Mar 26 16:15 . drwxr-xr-x 18 root root 4.0K Mar 26 2011 .. -rw-r--r-- 1 root root 0 Feb 1 16:12 .keep drwxr-xr-x 1 root root 0 Mar 18 12:09 buffer drwxr-s--x 1 68591 68591 4.0K Feb 16 15:43 mydomain.com drwx------ 2 root root 4.0K Feb 1 16:12 cdrom drwx------ 2 root root 4.0K Feb 1 16:12 floppy drwxr-xr-x 1 root root 0 Sep 1 2009 services drwxr-xr-x 1 root root 0 Feb 10 15:08 www /etc/samba/smb.conf [mnt] comment = Mount points writable = yes writeable = yes browseable = yes browsable = yes path = /mnt /etc/fstab sshfs#[email protected]:/home/to/pub/dir/ /mnt/mydomain.com/ fuse comment=sshfs,noauto,users,exec,uid=0,gid=0,allow_other,reconnect,follow_symlinks,transform_symlinks,idmap=none,SSHOPT=HostBasedAuthentication 0 0 For an easier read: [email protected] /home/to/pub/dir/ /mnt/mydomain.com/ options: comment=sshfs noauto users exec uid=0 gid=0 allow_other reconnect follow_symlinks transform_symlinks idmap=none SSHOPT=HostBasedAuthentication Help!

  Read the article

• centos 6.3 kvm external ip forwarding to guests

  - by user1111702

  I have a centos 6.3 server with kvm installed. The server has 4 external ips and one NIC. 176.9.xxx.xx1 176.9.xxx.xx2 176.9.xxx.xx3 176.9.xxx.xx4 I use the following configuration ifcfg-eth0 as slave to ifcfg-br0 the configuration in ifcfg-eth0 is DEVICE=eth0 ONBOOT=yes BRIDGE=br0 HWADDR=14:da:e9:b3:8b:99 and in the ifcfg-br0 DEVICE=br0 TYPE=Bridge BOOTPROTO=static BROADCAST=176.9.xxx.xxx IPADDR=176.9.xxx.xx1 NETMASK=255.255.255.0 SCOPE="peer 176.9.xxx.xxx" and I have 3 more aliases for br0 , br0:1 to get the trafic from the second external ip DEVICE=br0:1 IPADDR=176.9.xxx.xx2 NETMASK=255.255.255.248 ONBOOT=yes br0:2 to get the trafic from the third external ip DEVICE=br0:1 IPADDR=176.9.xxx.xx3 NETMASK=255.255.255.248 ONBOOT=yes br0:3 to get the trafic from the second external ip DEVICE=br0:1 IPADDR=176.9.xxx.xx4 NETMASK=255.255.255.248 ONBOOT=yes The above settings work fine and I recieve the trafic from all the external ips. My problem is that I want to pass the trafic from external ip to specific virtual guest on my server. ie trafic that comes from 176.9.xxx.xxx2 must pass to virtual machine 1 176.9.xxx.xxx3 must pass to virtual machine 2 176.9.xxx.xxx4 must pass to virtual machine 3 Can you please help me how to achieve this ? What are the settings on the host and what should I do to the guests. Thank you in advance

  Read the article

• Timeout option not working on efi windows 7/windows8 dual boot machine

  - by Guenter

  I hav a gigbyte GA-Z77m-D3h mobo and installed Windows 8 Pro and Windows 7 Ultimate on two SSDs (in that order) in EFI mode. Now when I start my computer, I get the windows boot menu (text mode) with the two OSses to choose, but I have to manually press RETURN to have the computer boot into the Win OS. Even if I wait an hour, no default action takes place. Using bcdedit (from either of the OSses) I can successfully change the time out value, and it shows up in the bcdedit (no params) output. But it doesn't fire ... Here is my current BCDEdit output (headers are in German, but values should be readable): Windows-Start-Manager --------------------- Bezeichner {bootmgr} device partition=O: path \EFI\Microsoft\Boot\bootmgfw.efi description Windows Boot Manager locale de-DE inherit {globalsettings} integrityservices Enable default {default} resumeobject {5ad2802c-c60a-11e2-acdb-80331c501b11} displayorder {default} {current} {5ad2802a-c60a-11e2-acdb-80331c501b11} {5ad28028-c60a-11e2-acdb-80331c501b11} {5ad28029-c60a-11e2-acdb-80331c501b11} toolsdisplayorder {memdiag} timeout 5 displaybootmenu Yes Windows-Startladeprogramm ------------------------- Bezeichner {default} device partition=W: path \Windows\system32\winload.efi description Windows 7 locale de-DE inherit {bootloadersettings} recoverysequence {5ad2802e-c60a-11e2-acdb-80331c501b11} recoveryenabled Yes osdevice partition=W: systemroot \Windows resumeobject {5ad2802c-c60a-11e2-acdb-80331c501b11} nx OptIn Windows-Startladeprogramm ------------------------- Bezeichner {current} device partition=C: path \Windows\system32\winload.efi description Windows 8 locale de-DE inherit {bootloadersettings} recoverysequence {5ad28033-c60a-11e2-acdb-80331c501b11} integrityservices Enable recoveryenabled Yes isolatedcontext Yes allowedinmemorysettings 0x15000075 osdevice partition=C: systemroot \Windows resumeobject {5ad28031-c60a-11e2-acdb-80331c501b11} nx OptIn bootmenupolicy Standard hypervisorlaunchtype Auto (this output is from Win8; the Win7 looks nearly identical) If maybe the problem comes from a bad EFI Windows boot manager installation, can this be fixed without loosing my windows installations?

  Read the article

• Set proper rights for sshfs mountpoint so it can be shared with samba

  - by CS01

  I have a domain hoster that provides access via SSH. My platforms are: Gentoo 2.6.36-r5 Windows (XP/Vista/7) I work on my Windows, I use Gentoo to do all the magic Windows can't do. Therefore I use sshfs to mount the remote public directory for my domain to /mnt/mydomain.com. Authentication is done via keys, so lazy me don't have to type in my password every now and then. Since I do my coding on Windows, and I don't want to upload/download the changed files all the time, I want to access this /mnt/mydomain.com via a samba share. So I shared /mnt in samba, all mounts except mydomain.com is listed on my Windows Explorer. My theories are: sshfs does not set the mountpoint uid/gid to something that samba expects samba does not know that it has to include the uid/gid that /mnt/mydomain.com has been set. All above is wrong, and I don't know. Here are configs and output from console, need anything else just let me know. Also no errors or warnings that I take notice of being relevant to this issue, but I might be wrong. gentoo ~ # ls -lah /mnt total 20K drwxr-xr-x 9 root root 4.0K Mar 26 16:15 . drwxr-xr-x 18 root root 4.0K Mar 26 2011 .. -rw-r--r-- 1 root root 0 Feb 1 16:12 .keep drwxr-xr-x 1 root root 0 Mar 18 12:09 buffer drwxr-s--x 1 68591 68591 4.0K Feb 16 15:43 mydomain.com drwx------ 2 root root 4.0K Feb 1 16:12 cdrom drwx------ 2 root root 4.0K Feb 1 16:12 floppy drwxr-xr-x 1 root root 0 Sep 1 2009 services drwxr-xr-x 1 root root 0 Feb 10 15:08 www /etc/samba/smb.conf [mnt] comment = Mount points writable = yes writeable = yes browseable = yes browsable = yes path = /mnt /etc/fstab sshfs#[email protected]:/home/to/pub/dir/ /mnt/mydomain.com/ fuse comment=sshfs,noauto,users,exec,uid=0,gid=0,allow_other,reconnect,follow_symlinks,transform_symlinks,idmap=none,SSHOPT=HostBasedAuthentication 0 0 For an easier read: [email protected] /home/to/pub/dir/ /mnt/mydomain.com/ options: comment=sshfs noauto users exec uid=0 gid=0 allow_other reconnect follow_symlinks transform_symlinks idmap=none SSHOPT=HostBasedAuthentication Help!

  Read the article

• How NumLock is used in Ubuntu?

  - by ???

  I found that, when the NumLock is on, then many key combination won't work. For example, generally Ctrl-A is used to select all, but it won't work when NumLock is on. There are two keyboard: The laptop one (Thinkpad T61), and an external USB keyboard. The logs shown in xev: (no log when pressed Fn+NumLock on the laptop keyboard) Logs when pressed the NumLock on the USB keyboard: (Switch On) KeyPress event, serial 40, synthetic NO, window 0xb600001, root 0xac, subw 0x0, time 22187595, (102,107), root:(1198,133), state 0x10, keycode 77 (keysym 0xff7f, Num_Lock), same_screen YES, XLookupString gives 0 bytes: XmbLookupString gives 0 bytes: XFilterEvent returns: False PropertyNotify event, serial 40, synthetic NO, window 0xb600001, atom 0x1b8 (XKLAVIER_STATE), time 22187601, state PropertyNewValue KeyRelease event, serial 40, synthetic NO, window 0xb600001, root 0xac, subw 0x0, time 22187723, (102,107), root:(1198,133), state 0x10, keycode 77 (keysym 0xff7f, Num_Lock), same_screen YES, XLookupString gives 0 bytes: XFilterEvent returns: False (Switch Off) KeyPress event, serial 40, synthetic NO, window 0xb600001, root 0xac, subw 0x0, time 22187899, (102,107), root:(1198,133), state 0x0, keycode 77 (keysym 0xff7f, Num_Lock), same_screen YES, XLookupString gives 0 bytes: XmbLookupString gives 0 bytes: XFilterEvent returns: False PropertyNotify event, serial 40, synthetic NO, window 0xb600001, atom 0x1b8 (XKLAVIER_STATE), time 22187904, state PropertyNewValue KeyRelease event, serial 40, synthetic NO, window 0xb600001, root 0xac, subw 0x0, time 22188003, (102,107), root:(1198,133), state 0x10, keycode 77 (keysym 0xff7f, Num_Lock), same_screen YES, XLookupString gives 0 bytes: XFilterEvent returns: False

  Read the article

• Ubuntu 10.04 network manager issues

  - by Shark

  I was using the default network manager to connect to my wi-fi network, but if the connection is dropped or router restarted the network manager wont reconnect automatically after i guess a couple of tries and just gives a pop-up to connect manually . To avoid this annoyance I installed WICD but though it does try to reconnect to the network after a drop in connection it is unable to resolve the ip address and i am left with an even bigger annoyance . 1. Is there a way to counter either of these issues ? 2. Something like a background process that will check network status periodically and then try to connect to a favored network ? Edit- out put of lshw -C network *-network description: Wireless interface product: Broadcom Corporation vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:12:00.0 logical name: eth1 version: 01 serial: c0:cb:38:18:9b:7f width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.60.48.36 ip=192.168.11.2 latency=0 multicast=yes wireless=IEEE 802.11 resources: irq:17 memory:fbc00000-fbc03fff *-network description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:13:00.0 logical name: eth0 version: 02 serial: f0:4d:a2:94:2d:74 size: 10MB/s capacity: 100MB/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10MB/s resources: irq:29 ioport:e000(size=256) memory:d0b10000-d0b10fff(prefetchable) memory:d0b00000-d0b0ffff(prefetchable) memory:fb200000-fb21ffff(prefetchable)

  Read the article

• Postfix connects to wrong relay?

  - by Eric

  I am trying to set up postfix on my ubuntu server in order to send emails via my isp's smtp server. I seem to have missed something because the mail.log tells me: Jan 19 11:23:11 mediaserver postfix/smtp[5722]: CD73EA05B7: to=<[email protected]>, relay=new.mailia.net[85.183.240.20]:25, delay=6.2, delays=5.7/0.02/0.5/0, dsn=4.7.0, status=deferred (SASL authentication failed; server new.mailia.net[85.183.240.20] said: 535 5.7.0 Error: authentication failed: ) The relay "new.mailia.net[85.183.240.20]:25" was not set up by me. I use "relayhost = smtp.alice.de". Why is postfix trying to connect to a different server? Here is my main.cf: # See /usr/share/postfix/main.cf.dist for a commented, more complete version # Debian specific: Specifying a file name will cause the first # line of that file to be used as the name. The Debian default # is /etc/mailname. #myorigin = /etc/mailname smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h readme_directory = no # TLS parameters smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key smtpd_use_tls=yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache # See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for # information on enabling SSL in the smtp client. myhostname = mediaserver alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases mydestination = mediaserver, localhost.localdomain, , localhost relayhost = smtp.alice.de mynetworks = 127.0.0.0/8 mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all myorigin = /etc/mailname inet_protocols = all sender_canonical_maps = hash:/etc/postfix/sender_canonical smtp_sasl_auth_enable = yes smtp_sasl_password_maps = hash:/etc/postfix/sasl_password smtp_sasl_security_options = noanonymous Output of postconf -n: alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases append_dot_mydomain = no biff = no config_directory = /etc/postfix inet_interfaces = all inet_protocols = ipv4 mailbox_size_limit = 0 mydestination = mediaserver, localhost.localdomain, , localhost myhostname = mediaserver mynetworks = 127.0.0.0/8 myorigin = /etc/mailname readme_directory = no recipient_delimiter = relayhost = smtp.alice.de sender_canonical_maps = hash:/etc/postfix/sender_canonical smtp_generic_maps = hash:/etc/postfix/generic smtp_sasl_auth_enable = yes smtp_sasl_password_maps = hash:/etc/postfix/sasl_password smtp_sasl_security_options = noanonymous smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) smtpd_tls_cert_file = /etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file = /etc/ssl/private/ssl-cert-snakeoil.key smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtpd_use_tls = yes

  Read the article

• Nginx Ubuntu Postfix Config - Can't connect to incoming IMAP server 'server not responding' but can send mail via outgoing using same details?

  - by daveaspinall

  I'm pretty to new server admin and especially nginx but seem to be getting ok fine apart from accessing my mail via my iPhone? I've changed my domain to 'domain.com' The thing is I can send mail via my outgoing IMAP server but can't connect to the incoming one? I just get the message "the mail server at mail.domain.com is not responding" /etc/postfix/main.cf alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases append_dot_mydomain = no biff = no broken_sasl_auth_clients = yes config_directory = /etc/postfix home_mailbox = Maildir/ inet_interfaces = all inet_protocols = all mailbox_command = mailbox_size_limit = 0 mydestination = domain.com, mail.domain.com, localhost.com, , localhost, localhost.localdomain mydomain = domain.com myhostname = mail.domain.com mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 myorigin = /etc/mailname recipient_delimiter = + relayhost = smtp_tls_note_starttls_offer = yes smtp_tls_security_level = may smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) smtpd_recipient_restrictions = permit_sasl_authenticated,permit_mynetworks,reject_unauth_destination smtpd_sasl_auth_enable = yes smtpd_sasl_local_domain = smtpd_sasl_security_options = noanonymous smtpd_tls_CAfile = /etc/ssl/certs/cacert.pem smtpd_tls_auth_only = no smtpd_tls_cert_file = /etc/ssl/certs/smtpd.crt smtpd_tls_key_file = /etc/ssl/private/smtpd.key smtpd_tls_loglevel = 1 smtpd_tls_received_header = yes smtpd_tls_security_level = may smtpd_tls_session_cache_timeout = 3600s tls_random_source = dev:/dev/urandom telnet localhost 25 ehlo locahost 250-mail.domain.com 250-PIPELINING 250-SIZE 10240000 250-VRFY 250-ETRN 250-STARTTLS 250-AUTH LOGIN PLAIN 250-AUTH=LOGIN PLAIN 250-ENHANCEDSTATUSCODES 250-8BITMIME 250 DSN Using the following details to connect: username password hostname: mail.domain.com port: 25 iptables --list Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination I also sent mail to the server as a test and got this missage if it helps? Technical details of temporary failure: [mail.domain.com. (10): Connection refused] I also looked in /var/log/mail.log and it has multiple entries of: postfix/smtpd[12239]: connect from 5acefc9a.bb.sky.com[90.206.252.xxx] Mar 23 06:47:09 new-domain postfix/smtpd[12239]: lost connection after CONNECT from 5acefc9a.bb.sky.com[90.206.252.154] Notice new-domain which is incorrect but the server hostname and hostname in the configs are correct? I recently moves servers and the host has set the primary domain on the service as new-domain.com so this may be the issue? Like I said, it works to connect to outgoing server, but incoming gets the not responding error? Any idea would be much appreciated!

  Read the article

• Can't access site internally, but DNS works

  - by BloodyIron

  1) I have apache2 running a vhost for a website. 2) This apache2 instance is already successfuly setup for other websites on it to be accessible internally and externally. 3) I am using an internal bind9 server to resolve the new website's domain internally to the private IP. This bind9 server is not public facing, nor is it the master server on the internet. 4) The DNS internally resolves to the right IP. 5) Firefox reports "server not found". 6) I have copied the config almost identically to other configs that are known to work (adjusting for proper paths of course). In turn I have reloaded and restarted apache2 repeatedly. 7) I have an entry to forward .org .info .net alternative TLDs to .com in the vhost config for this domain, and my browser goes from .org to .com despite note #5. 8) /var/log/apache2/access.log shows when someone externally tries to access the site, but no activity is observed when someone tries to access internally. Changing the log level does not appear to improve the situation. 9) I am out of ideas, nothing appears to be wrong. Please help? To be explicit. Why is this new site unreachable internally? I would like to clarify on something, even though I have already outlined this. YES I know this system is in a private network. NO it is not going through a router. YES I am using an internal DNS server (bind9) to resolve, and YES it does resolve to the proper internal IP. YES other websites on the same server setup in the same way with internal resolution work right now and have done for a while. Everything for this domain is setup the same as the other working domains as far as I can tell. The other working domains are internally AND externally accessible. This domain I am working with is only currently externally accessible. When I go to it internally firefox tells me "Server not found".

  Read the article

• Bacula stops writing to disk volume after 2GB

  - by m.list

  Bacula Version: 5.2.5 I have configured bacula to write volumes to disk, however bacula stops writing to the volume as soon as it reaches 2gb. The file system is not an issue as I have stored files larger than 2gb. 06-Dec 17:22 backup-sd JobId 8421: End of Volume "Full-Monthly-0005" at 0:2147475577 on device "FileStorage" (/nfs/backup-pool). Write of 64512 bytes got 8069. 06-Dec 17:22 backup-sd JobId 8421: End of medium on Volume "Full-Monthly-0005" Bytes=2,147,475,578 Blocks=33,288 at 06-Dec-2012 17:22. backup1@backup:/nfs/backup-pool$ ls -alh Full-Monthly-0005 <br> -rw-r----- 1 bacula tape 2.0G Dec 3 16:14 Full-Monthly-0005 bacula-dir.conf: Pool { Name = Full-Monthly Pool Type = Backup Recycle = yes Volume Retention = 5 months Volume Use Duration = 1 day Maximum Volumes = 5 Maximum Volume Bytes = 12gb } bacula-sd.conf: Device { Name = FileStorage Media Type = File Archive Device = /nfs/backup-pool LabelMedia = yes # lets Bacula label unlabeled media Random Access = Yes RemovableMedia = no AlwaysOpen = no Label media = yes Maximum Volume Size = 12gb } In my original configuration Maximum Volume Bytes and Maximum Volume Size were not set at all and so should have defauted to no maximum but that did not work either.

  Read the article

• file system damage

  - by jffrs

  I try recover the backup superblock on /dev/sda2 that contain ubuntu 12.04 LTS and partition ext4 with livecd ubuntu 10.04. the message is below root@ubuntu:/home/ubuntu# fsck.ext4 -b 163840 -B 4096 /dev/sda2 e2fsck 1.41.11 (14-Mar-2010) /dev/sda2 was not cleanly unmounted, check forced. Resize inode not valid. Recreate? yes Pass 1: Checking inodes, blocks, and sizes Programming error? block #7963637 claimed for no reason in process_bad_block. Programming error? block #11240437 claimed for no reason in process_bad_block. Root inode is not a directory. Clear? yes Inode 712 is in extent format, but superblock is missing EXTENTS feature Fix? yes Inode 98519 has compression flag set on filesystem without compression support. Clear? yes Inode 98519 has INDEX_FL flag set but is not a directory. Clear HTree index? what's the correct procedure?

  Read the article

• Wireless not working on Dell XPS 17 after installing 12.04

  - by user60622

  I (linux newbie) have a Dell XPS 17 and tried to install Ubuntu 12.04. After installation all WLAN accesspoints near are detected. But I can not connect (but I am able to connect with other computers as well as with Dell XPS 17 under windows). Outputs: iwconfig lo no wireless extensions. wlan0 IEEE 802.11bg ESSID:"LerchenPoint" Mode:Managed Frequency:2.412 GHz Access Point: 58:6D:8F:A0:2D:58 Bit Rate=1 Mb/s Tx-Power=14 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=70/70 Signal level=-37 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:19 Missed beacon:0 eth0 no wireless extensions. sudo lshw -class network *-network description: Wireless interface product: Centrino Wireless-N 1000 vendor: Intel Corporation physical id: 0 bus info: pci@0000:04:00.0 logical name: wlan0 version: 00 serial: 00:26:c7:99:98:28 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.2.0-24-generic firmware=39.31.5.1 build 35138 latency=0 link=no multicast=yes wireless=IEEE 802.11bg resources: irq:50 memory:f0400000-f0401fff *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:0a:00.0 logical name: eth0 version: 06 serial: f0:4d:a2:56:e3:94 size: 1Gbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8168e-2.fw ip=192.168.0.123 latency=0 link=yes multicast=yes port=MII speed=1Gbit/s resources: irq:47 ioport:6000(size=256) memory:f0a04000-f0a04fff memory:f0a00000-f0a03fff dmesg | grep iwl [ 10.157531] iwlwifi 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 10.157561] iwlwifi 0000:04:00.0: setting latency timer to 64 [ 10.157598] iwlwifi 0000:04:00.0: pci_resource_len = 0x00002000 [ 10.157599] iwlwifi 0000:04:00.0: pci_resource_base = ffffc90011090000 [ 10.157601] iwlwifi 0000:04:00.0: HW Revision ID = 0x0 [ 10.157731] iwlwifi 0000:04:00.0: irq 50 for MSI/MSI-X [ 10.157834] iwlwifi 0000:04:00.0: Detected Intel(R) Centrino(R) Wireless-N 1000 BGN, REV=0x6C [ 10.157976] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S [ 10.179772] iwlwifi 0000:04:00.0: device EEPROM VER=0x15d, CALIB=0x6 [ 10.179775] iwlwifi 0000:04:00.0: Device SKU: 0X50 [ 10.179777] iwlwifi 0000:04:00.0: Valid Tx ant: 0X1, Valid Rx ant: 0X3 [ 10.179796] iwlwifi 0000:04:00.0: Tunable channels: 13 802.11bg, 0 802.11a channels [ 10.574728] iwlwifi 0000:04:00.0: loaded firmware version 39.31.5.1 build 35138 [ 10.726409] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 19.714132] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S [ 19.777862] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S [ 2251.603089] iwlwifi 0000:04:00.0: PCI INT A disabled [ 2266.578350] iwlwifi 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 2266.578399] iwlwifi 0000:04:00.0: setting latency timer to 64 [ 2266.578435] iwlwifi 0000:04:00.0: pci_resource_len = 0x00002000 [ 2266.578437] iwlwifi 0000:04:00.0: pci_resource_base = ffffc90011090000 [ 2266.578439] iwlwifi 0000:04:00.0: HW Revision ID = 0x0 [ 2266.578704] iwlwifi 0000:04:00.0: irq 50 for MSI/MSI-X [ 2266.578808] iwlwifi 0000:04:00.0: Detected Intel(R) Centrino(R) Wireless-N 1000 BGN, REV=0x6C [ 2266.578916] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S [ 2266.600709] iwlwifi 0000:04:00.0: device EEPROM VER=0x15d, CALIB=0x6 [ 2266.600712] iwlwifi 0000:04:00.0: Device SKU: 0X50 [ 2266.600713] iwlwifi 0000:04:00.0: Valid Tx ant: 0X1, Valid Rx ant: 0X3 [ 2266.600727] iwlwifi 0000:04:00.0: Tunable channels: 13 802.11bg, 0 802.11a channels [ 2266.605978] iwlwifi 0000:04:00.0: loaded firmware version 39.31.5.1 build 35138 [ 2266.606331] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 2266.614179] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S [ 2266.681541] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S Solutions I tried: rfkill list all 0: dell-wifi: Wireless LAN Soft blocked: no Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: no echo "options iwlwifi 11n_disable=1" | sudo tee /etc/modprobe.d/iwlwifi.conf options iwlwifi 11n_disable=1 sudo modprobe -rfv iwlwifi WARNING: All config files need .conf: /etc/modprobe.d/blacklist, it will be ignored in a future release. rmmod /lib/modules/3.2.0-24-generic/kernel/drivers/net/wireless/iwlwifi/iwlwifi.ko rmmod /lib/modules/3.2.0-24-generic/kernel/net/mac80211/mac80211.ko rmmod /lib/modules/3.2.0-24-generic/kernel/net/wireless/cfg80211.ko sudo modprobe iwlwifi WARNING: All config files need .conf: /etc/modprobe.d/blacklist, it will be ignored in a future release. replacing iwlwifi-1000-5.ucode (current driver) against iwlwifi-1000-3.ucode sudo jockey-gtk: (jockey-gtk:2493): Gtk-CRITICAL **: gtk_icon_set_render_icon_pixbuf: assertion icon_set != NULL' failed (jockey-gtk:2493): Gtk-CRITICAL **: gtk_icon_set_render_icon_pixbuf: assertion icon_set != NULL' failed nothing is listet in "Additional drivers" (german: "Zusätzliche Treiber"). gksudo gedit /etc/modprobe.d/blacklist.conf add "blacklist acer_wmi" Any help would be appreciated very much. Thanks!!

  Read the article

• Picker view wont rotate- iPhone

  - by lotuseater

  hi, I am making a booking page. I have included 3 pickers in it. I have included all the delegates required for the pickers to work but it wont rotate. I have enabled user interaction and multitouch in the nib file. Here is my code. Please help me. :( @interface ChooseContactsFrom : UIViewController { IBOutlet UIPickerView *statePickup; IBOutlet UIPickerView *paymentMethodPickup; IBOutlet UIDatePicker *expiryDatePickup; IBOutlet UIView *statePickupView; IBOutlet UIView *paymentMethodPickupView; IBOutlet UIView *expiryDatePickupView; } (void)viewDidLoad { self.title = @"Choose Contacts"; //Fill in the states name/ stateArray = [[NSArray alloc]initWithObjects:@"",nil]; paymentModeArray = [[NSArray alloc] initWithObjects:@"Credit Card", @"Cash",@"Account",@"Voucher",@"Debit Card", nil]; paymentMethodPickup.frame = CGRectMake(0.0, 44.0, paymentMethodPickup.frame.size.width, paymentMethodPickup.frame.size.height); paymentMethodPickup.userInteractionEnabled = YES; paymentMethodPickup.multipleTouchEnabled = YES; paymentMethodPickupView.frame = CGRectMake(0.0, 210.0, paymentMethodPickupView.frame.size.width, paymentMethodPickupView.frame.size.height); statePickup.frame = CGRectMake(0.0, 44.0,statePickup.frame.size.width, statePickup.frame.size.height); statePickupView.frame = CGRectMake(0.0, 210.0, statePickupView.frame.size.width, statePickupView.frame.size.height); stateArray = [[NSArray alloc] initWithObjects:@"state1", @"state2", @"state3", @"state4", @"state5", @"state6", @"state7", @"state8", @"state9", @"state10", nil]; expiryDatePickup.frame = CGRectMake(0.0, 44.0, expiryDatePickup.frame.size.width, expiryDatePickup.frame.size.height); expiryDatePickupView.frame = CGRectMake(0.0, 210.0, expiryDatePickupView.frame.size.width, expiryDatePickupView.frame.size.height); [super viewDidLoad]; } -(IBAction)back:(id)sender { [self dismissModalViewControllerAnimated:YES]; } pragma mark pickerView delegates (NSInteger)numberOfComponentsInPickerView:(UIPickerView *)thePickerView { return 1; } (NSInteger)pickerView:(UIPickerView *)thePickerView numberOfRowsInComponent:(NSInteger)component { if( thePickerView == statePickup) { return [stateArray count]; } else if(thePickerView == paymentMethodPickup) { return [paymentModeArray count]; } else { return 0; } } (NSString *)pickerView:(UIPickerView *)thePickerView titleForRow:(NSInteger)row forComponent:(NSInteger)component { if(thePickerView == statePickup) { return [stateArray objectAtIndex:row]; } else if(thePickerView == paymentMethodPickup) { return [paymentModeArray objectAtIndex:row]; } else { return @" "; } } (CGFloat)pickerView:(UIPickerView *)pickerView rowHeightForComponent:(NSInteger)component{ return 50; } (CGFloat)pickerView:(UIPickerView *)pickerView widthForComponent:(NSInteger)component { return 250; } (void)pickerView:(UIPickerView *)thepickerView didSelectRow:(NSInteger)row inComponent:(NSInteger)component { if(thepickerView == statePickup) { state.text=[stateArray objectAtIndex:row]; } if(thepickerView == paymentMethodPickup) { payment.text=[paymentModeArray objectAtIndex:row]; } } (void)ClearSubviews { //[firstName resignFirstResponder]; // [lastName resignFirstResponder]; // [email resignFirstResponder]; // [address1 resignFirstResponder]; // [address2 resignFirstResponder]; // [city resignFirstResponder]; // //[state resignFirstResponder]; // [payment resignFirstResponder]; // [creditCard resignFirstResponder]; // [expirydate removeFromSuperview]; // [statePickup removeFromSuperview]; // [paymentMethodPickup removeFromSuperview]; } (BOOL)textFieldShouldBeginEditing:(UITextField *)textField { // [self showPicker:textField]; //[self setViewMovedUp]; if(textField == firstName || textField == lastName || textField == email || textField == address1 || textField == address2 ||textField == city) { [self ClearSubviews]; //pickerToolbar.hidden = TRUE; return YES; } else if(textField == payment) { [self ClearSubviews]; [self setViewMovedUp]; [payment setText:[paymentModeArray objectAtIndex:0]]; [self.view insertSubview:paymentMethodPickupView aboveSubview:self.view]; return NO; } else if(textField == state) { [self ClearSubviews]; [self setViewMovedUp]; [state setText:[stateArray objectAtIndex:0]]; [self.view insertSubview:statePickupView aboveSubview:self.view]; return NO; } else if(textField == expirydate) { [self setViewMovedUp]; expiryDatePickup.date = [NSDate date]; NSDate *date1 = [NSDate date]; NSDateFormatter *dateFormatter = [[NSDateFormatter alloc] init]; [dateFormatter setDateStyle:NSDateFormatterMediumStyle]; NSString *strDate=[dateFormatter stringFromDate:date1]; NSString *str=[[NSString alloc] initWithString: strDate]; [expirydate setText:str]; [self.view insertSubview:expiryDatePickupView aboveSubview:self.view]; return NO; } else if(textField == creditCard) { [self ClearSubviews]; [self setViewMovedUp]; return YES; } else { [self ClearSubviews]; return YES; } } -(BOOL)textFieldShouldEndEditing:(UITextField *)textField { return YES; } (void)textFieldDidEndEditing:(UITextField *)textField { if(textField == creditCard) { [self moveDown]; } } (BOOL)textFieldShouldReturn:(UITextField *)textField { [firstName resignFirstResponder]; [lastName resignFirstResponder]; [email resignFirstResponder]; [address1 resignFirstResponder]; [address2 resignFirstResponder]; [city resignFirstResponder]; [creditCard resignFirstResponder]; return YES; } -(IBAction)textFieldDoneEditing:(id)sender { [sender resignFirstResponder]; } ////////----------------------------------------------------------------------- pragma mark move screen (void)setViewMovedUp { [UIView beginAnimations:nil context:NULL]; [UIView setAnimationDuration:0.3]; // Make changes to the view's frame inside the animation block. They will be animated instead // of taking place immediately. CGRect rect = [self.view frame]; // If moving up, not only decrease the origin but increase the height so the view // covers the entire screen behind the keyboard. rect.origin.y -= 50.0f; rect.size.height -= 80.0f; [self.view setFrame:rect]; [UIView commitAnimations]; } -(void)moveDown { [UIView beginAnimations:nil context:NULL]; [UIView setAnimationDuration:0.3]; // Make changes to the view's frame inside the animation block. They will be animated instead // of taking place immediately. CGRect rect = [self.view frame]; rect.origin.y += 50.0f; rect.size.height += 80.0f; [self.view setFrame:rect]; // [UIView setBackgroundColor:[UIColor darkGrayColor]]; [UIView commitAnimations]; } pragma mark Method to show pickers -(void)showPicker:(UITextField *)textField { if(textField == expirydate) { expiryDatePickup .date = [NSDate date]; NSDate *date1 = [NSDate date]; NSDateFormatter *dateFormatter = [[NSDateFormatter alloc] init]; [dateFormatter setDateStyle:NSDateFormatterMediumStyle]; NSString *strDate=[dateFormatter stringFromDate:date1]; NSString *str=[[NSString alloc] initWithString: strDate]; [expirydate setText:str]; [self.view insertSubview:expiryDatePickup aboveSubview:self.view]; } else if(textField == payment) { [payment setText:[paymentModeArray objectAtIndex:0]]; [self.view insertSubview:paymentMethodPickupView aboveSubview:self.view]; } else if(textField == state) { [state setText:[stateArray objectAtIndex:0]]; [self.view insertSubview:statePickupView aboveSubview:self.view]; } } (IBAction)datePickerChanged:(id)sender { NSDateFormatter *dateFormatter = [[NSDateFormatter alloc] init]; [dateFormatter setDateStyle:NSDateFormatterMediumStyle]; NSDate *date=expiryDatePickup.date; formattedDateString1 = [dateFormatter stringFromDate:date]; [expirydate setText:formattedDateString1]; NSCalendar *gregorian = [[NSCalendar alloc] initWithCalendarIdentifier:NSGregorianCalendar]; unsigned int unitFlags = NSMonthCalendarUnit | NSDayCalendarUnit; components = [gregorian components:unitFlags fromDate:date]; [gregorian release]; } pragma mark done and cancel methods -(IBAction) btnCancelExpiryDate:(id)sender { [self moveDown]; [expirydate setText:@" "]; [expiryDatePickupView removeFromSuperview]; } -(IBAction) btnDoneExpiryDate:(id)sender { [self moveDown]; [expiryDatePickupView removeFromSuperview]; expiryDatePickup .date = [NSDate date]; } -(IBAction)cancelPaymentType:(id)sender { [self moveDown]; [payment setText:@" "]; [paymentMethodPickupView removeFromSuperview]; } -(IBAction)donePaymentType:(id)sender { [self moveDown]; [paymentMethodPickupView removeFromSuperview]; } -(IBAction)doneState:(id)sender { [self moveDown]; [statePickupView removeFromSuperview]; } (IBAction)cancelState:(id)sender; { [self moveDown]; [state setText:@" "]; [statePickupView removeFromSuperview]; }

  Read the article

• Snort's problems in generating alert from Darpa 1998 intrusion detection dataset.

  - by manofseven2

  Hi. I’m working on DARPA 1998 intrusion detection dataset. When I run snort on this dataset (outside.tcpdump file), snort don’t generate complete list of alerts. It means snort start from last few hours of tcpdump file and generate alerts about this section of file and all of packets in first hours are ignored. Another problem in generatin alert is in time stamp of generated alerts. This means when I run snort on a specific day of dataset, snort insert incorrect time stamp for that alert. The configuration and command line statement and other information about my research are: Snort version: 2.8.6 Operating system: windows XP Rule version: snortrules-snapshot-2860_s.tar.gz -———————————————————————— Command line: snort_2.8.6 c D:\programs\Snort_2.8.6\snort\etc\snort.conf -r d:\users\amir\docs\darpa\training_data\week_3\monday\outside.tcpdump -l D:\users\amir\current-task\research\thesis\snort\890230 -————————————————————————— Snort.config Hi. I'm working on DARPA 1998 intrusion detection dataset. When I run snort on this dataset (outside.tcpdump file), snort don't generate complete list of alerts. It means snort start from last few hours of tcpdump file and generate alerts about this section of file and all of packets in first hours are ignored. Another problem in generatin alert is in time stamp of generated alerts. This means when I run snort on a specific day of dataset, snort insert incorrect time stamp for that alert. The configuration and command line statement and other information about my research are: Snort version: 2.8.6 Operating system: windows XP Rule version: snortrules-snapshot-2860_s.tar.gz Command line: snort_2.8.6 -c D:\programs\Snort_2.8.6\snort\etc\snort.conf -r d:\users\amir\docs\darpa\training_data\week_3\monday\outside.tcpdump -l D:\users\amir\current-task\research\thesis\snort\890230 Snort.config # Setup the network addresses you are protecting var HOME_NET any # Set up the external network addresses. Leave as "any" in most situations var EXTERNAL_NET any # List of DNS servers on your network var DNS_SERVERS $HOME_NET # List of SMTP servers on your network var SMTP_SERVERS $HOME_NET # List of web servers on your network var HTTP_SERVERS $HOME_NET # List of sql servers on your network var SQL_SERVERS $HOME_NET # List of telnet servers on your network var TELNET_SERVERS $HOME_NET # List of ssh servers on your network var SSH_SERVERS $HOME_NET # List of ports you run web servers on portvar HTTP_PORTS [80,1220,2301,3128,7777,7779,8000,8008,8028,8080,8180,8888,9999] # List of ports you want to look for SHELLCODE on. portvar SHELLCODE_PORTS !80 # List of ports you might see oracle attacks on portvar ORACLE_PORTS 1024: # List of ports you want to look for SSH connections on: portvar SSH_PORTS 22 # other variables, these should not be modified var AIM_SERVERS [64.12.24.0/23,64.12.28.0/23,64.12.161.0/24,64.12.163.0/24,64.12.200.0/24,205.188.3.0/24,205.188.5.0/24,205.188.7.0/24,205.188.9.0/24,205.188.153.0/24,205.188.179.0/24,205.188.248.0/24] var RULE_PATH ../rules var SO_RULE_PATH ../so_rules var PREPROC_RULE_PATH ../preproc_rules # Stop generic decode events: config disable_decode_alerts # Stop Alerts on experimental TCP options config disable_tcpopt_experimental_alerts # Stop Alerts on obsolete TCP options config disable_tcpopt_obsolete_alerts # Stop Alerts on T/TCP alerts config disable_tcpopt_ttcp_alerts # Stop Alerts on all other TCPOption type events: config disable_tcpopt_alerts # Stop Alerts on invalid ip options config disable_ipopt_alerts # Alert if value in length field (IP, TCP, UDP) is greater th elength of the packet # config enable_decode_oversized_alerts # Same as above, but drop packet if in Inline mode (requires enable_decode_oversized_alerts) # config enable_decode_oversized_drops # Configure IP / TCP checksum mode config checksum_mode: all config pcre_match_limit: 1500 config pcre_match_limit_recursion: 1500 # Configure the detection engine See the Snort Manual, Configuring Snort - Includes - Config config detection: search-method ac-split search-optimize max-pattern-len 20 # Configure the event queue. For more information, see README.event_queue config event_queue: max_queue 8 log 3 order_events content_length dynamicpreprocessor directory D:\programs\Snort_2.8.6\snort\lib\snort_dynamicpreprocessor dynamicengine D:\programs\Snort_2.8.6\snort\lib\snort_dynamicengine\sf_engine.dll # path to dynamic rules libraries #dynamicdetection directory /usr/local/lib/snort_dynamicrules preprocessor frag3_global: max_frags 65536 preprocessor frag3_engine: policy windows detect_anomalies overlap_limit 10 min_fragment_length 100 timeout 180 preprocessor stream5_global: max_tcp 8192, track_tcp yes, track_udp yes, track_icmp no preprocessor stream5_tcp: policy windows, detect_anomalies, require_3whs 180, \ overlap_limit 10, small_segments 3 bytes 150, timeout 180, \ ports client 21 22 23 25 42 53 79 109 110 111 113 119 135 136 137 139 143 \ 161 445 513 514 587 593 691 1433 1521 2100 3306 6665 6666 6667 6668 6669 \ 7000 32770 32771 32772 32773 32774 32775 32776 32777 32778 32779, \ ports both 80 443 465 563 636 989 992 993 994 995 1220 2301 3128 6907 7702 7777 7779 7801 7900 7901 7902 7903 7904 7905 \ 7906 7908 7909 7910 7911 7912 7913 7914 7915 7916 7917 7918 7919 7920 8000 8008 8028 8080 8180 8888 9999 preprocessor stream5_udp: timeout 180 preprocessor http_inspect: global iis_unicode_map unicode.map 1252 compress_depth 20480 decompress_depth 20480 preprocessor http_inspect_server: server default \ chunk_length 500000 \ server_flow_depth 0 \ client_flow_depth 0 \ post_depth 65495 \ oversize_dir_length 500 \ max_header_length 750 \ max_headers 100 \ ports { 80 1220 2301 3128 7777 7779 8000 8008 8028 8080 8180 8888 9999 } \ non_rfc_char { 0x00 0x01 0x02 0x03 0x04 0x05 0x06 0x07 } \ enable_cookie \ extended_response_inspection \ inspect_gzip \ apache_whitespace no \ ascii no \ bare_byte no \ directory no \ double_decode no \ iis_backslash no \ iis_delimiter no \ iis_unicode no \ multi_slash no \ non_strict \ u_encode yes \ webroot no preprocessor rpc_decode: 111 32770 32771 32772 32773 32774 32775 32776 32777 32778 32779 no_alert_multiple_requests no_alert_large_fragments no_alert_incomplete preprocessor bo preprocessor ftp_telnet: global inspection_type stateful encrypted_traffic no preprocessor ftp_telnet_protocol: telnet \ ayt_attack_thresh 20 \ normalize ports { 23 } \ detect_anomalies preprocessor ftp_telnet_protocol: ftp server default \ def_max_param_len 100 \ ports { 21 2100 3535 } \ telnet_cmds yes \ ignore_telnet_erase_cmds yes \ ftp_cmds { ABOR ACCT ADAT ALLO APPE AUTH CCC CDUP } \ ftp_cmds { CEL CLNT CMD CONF CWD DELE ENC EPRT } \ ftp_cmds { EPSV ESTA ESTP FEAT HELP LANG LIST LPRT } \ ftp_cmds { LPSV MACB MAIL MDTM MIC MKD MLSD MLST } \ ftp_cmds { MODE NLST NOOP OPTS PASS PASV PBSZ PORT } \ ftp_cmds { PROT PWD QUIT REIN REST RETR RMD RNFR } \ ftp_cmds { RNTO SDUP SITE SIZE SMNT STAT STOR STOU } \ ftp_cmds { STRU SYST TEST TYPE USER XCUP XCRC XCWD } \ ftp_cmds { XMAS XMD5 XMKD XPWD XRCP XRMD XRSQ XSEM } \ ftp_cmds { XSEN XSHA1 XSHA256 } \ alt_max_param_len 0 { ABOR CCC CDUP ESTA FEAT LPSV NOOP PASV PWD QUIT REIN STOU SYST XCUP XPWD } \ alt_max_param_len 200 { ALLO APPE CMD HELP NLST RETR RNFR STOR STOU XMKD } \ alt_max_param_len 256 { CWD RNTO } \ alt_max_param_len 400 { PORT } \ alt_max_param_len 512 { SIZE } \ chk_str_fmt { ACCT ADAT ALLO APPE AUTH CEL CLNT CMD } \ chk_str_fmt { CONF CWD DELE ENC EPRT EPSV ESTP HELP } \ chk_str_fmt { LANG LIST LPRT MACB MAIL MDTM MIC MKD } \ chk_str_fmt { MLSD MLST MODE NLST OPTS PASS PBSZ PORT } \ chk_str_fmt { PROT REST RETR RMD RNFR RNTO SDUP SITE } \ chk_str_fmt { SIZE SMNT STAT STOR STRU TEST TYPE USER } \ chk_str_fmt { XCRC XCWD XMAS XMD5 XMKD XRCP XRMD XRSQ } \ chk_str_fmt { XSEM XSEN XSHA1 XSHA256 } \ cmd_validity ALLO \ cmd_validity EPSV \ cmd_validity MACB \ cmd_validity MDTM \ cmd_validity MODE \ cmd_validity PORT \ cmd_validity PROT \ cmd_validity STRU \ cmd_validity TYPE preprocessor ftp_telnet_protocol: ftp client default \ max_resp_len 256 \ bounce yes \ ignore_telnet_erase_cmds yes \ telnet_cmds yes preprocessor smtp: ports { 25 465 587 691 } \ inspection_type stateful \ normalize cmds \ normalize_cmds { MAIL RCPT HELP HELO ETRN EHLO EXPN VRFY ATRN SIZE BDAT DEBUG EMAL ESAM ESND ESOM EVFY IDENT NOOP RSET SEND SAML SOML AUTH TURN DATA QUIT ONEX QUEU STARTTLS TICK TIME TURNME VERB X-EXPS X-LINK2STATE XADR XAUTH XCIR XEXCH50 XGEN XLICENSE XQUE XSTA XTRN XUSR } \ max_command_line_len 512 \ max_header_line_len 1000 \ max_response_line_len 512 \ alt_max_command_line_len 260 { MAIL } \ alt_max_command_line_len 300 { RCPT } \ alt_max_command_line_len 500 { HELP HELO ETRN EHLO } \ alt_max_command_line_len 255 { EXPN VRFY ATRN SIZE BDAT DEBUG EMAL ESAM ESND ESOM EVFY IDENT NOOP RSET } \ alt_max_command_line_len 246 { SEND SAML SOML AUTH TURN ETRN DATA RSET QUIT ONEX QUEU STARTTLS TICK TIME TURNME VERB X-EXPS X-LINK2STATE XADR XAUTH XCIR XEXCH50 XGEN XLICENSE XQUE XSTA XTRN XUSR } \ valid_cmds { MAIL RCPT HELP HELO ETRN EHLO EXPN VRFY ATRN SIZE BDAT DEBUG EMAL ESAM ESND ESOM EVFY IDENT NOOP RSET SEND SAML SOML AUTH TURN DATA QUIT ONEX QUEU STARTTLS TICK TIME TURNME VERB X-EXPS X-LINK2STATE XADR XAUTH XCIR XEXCH50 XGEN XLICENSE XQUE XSTA XTRN XUSR } \ xlink2state { enabled } preprocessor ssh: server_ports { 22 } \ autodetect \ max_client_bytes 19600 \ max_encrypted_packets 20 \ max_server_version_len 100 \ enable_respoverflow enable_ssh1crc32 \ enable_srvoverflow enable_protomismatch preprocessor dcerpc2: memcap 102400, events [co ] preprocessor dcerpc2_server: default, policy WinXP, \ detect [smb [139,445], tcp 135, udp 135, rpc-over-http-server 593], \ autodetect [tcp 1025:, udp 1025:, rpc-over-http-server 1025:], \ smb_max_chain 3 preprocessor dns: ports { 53 } enable_rdata_overflow preprocessor ssl: ports { 443 465 563 636 989 992 993 994 995 7801 7702 7900 7901 7902 7903 7904 7905 7906 6907 7908 7909 7910 7911 7912 7913 7914 7915 7916 7917 7918 7919 7920 }, trustservers, noinspect_encrypted # SDF sensitive data preprocessor. For more information see README.sensitive_data preprocessor sensitive_data: alert_threshold 25 output alert_full: alert.log output database: log, mysql, user=root password=123456 dbname=snort host=localhost include classification.config include reference.config include $RULE_PATH/local.rules include $RULE_PATH/attack-responses.rules include $RULE_PATH/backdoor.rules include $RULE_PATH/bad-traffic.rules include $RULE_PATH/chat.rules include $RULE_PATH/content-replace.rules include $RULE_PATH/ddos.rules include $RULE_PATH/dns.rules include $RULE_PATH/dos.rules include $RULE_PATH/exploit.rules include $RULE_PATH/finger.rules include $RULE_PATH/ftp.rules include $RULE_PATH/icmp.rules include $RULE_PATH/icmp-info.rules include $RULE_PATH/imap.rules include $RULE_PATH/info.rules include $RULE_PATH/misc.rules include $RULE_PATH/multimedia.rules include $RULE_PATH/mysql.rules include $RULE_PATH/netbios.rules include $RULE_PATH/nntp.rules include $RULE_PATH/oracle.rules include $RULE_PATH/other-ids.rules include $RULE_PATH/p2p.rules include $RULE_PATH/policy.rules include $RULE_PATH/pop2.rules include $RULE_PATH/pop3.rules include $RULE_PATH/rpc.rules include $RULE_PATH/rservices.rules include $RULE_PATH/scada.rules include $RULE_PATH/scan.rules include $RULE_PATH/shellcode.rules include $RULE_PATH/smtp.rules include $RULE_PATH/snmp.rules include $RULE_PATH/specific-threats.rules include $RULE_PATH/spyware-put.rules include $RULE_PATH/sql.rules include $RULE_PATH/telnet.rules include $RULE_PATH/tftp.rules include $RULE_PATH/virus.rules include $RULE_PATH/voip.rules include $RULE_PATH/web-activex.rules include $RULE_PATH/web-attacks.rules include $RULE_PATH/web-cgi.rules include $RULE_PATH/web-client.rules include $RULE_PATH/web-coldfusion.rules include $RULE_PATH/web-frontpage.rules include $RULE_PATH/web-iis.rules include $RULE_PATH/web-misc.rules include $RULE_PATH/web-php.rules include $RULE_PATH/x11.rules include threshold.conf -————————————————————————————- Can anyone help me to solve this problem? Thanks.

  Read the article

• EKCalendar not added to iCal

  - by Alex75

  I have a strange behavior on my iPhone. I'm creating an application that uses calendar events (EventKit). The class that use is as follows: the .h one #import "GenericManager.h" #import <EventKit/EventKit.h> #define oneDay 60*60*24 #define oneHour 60*60 @protocol CalendarManagerDelegate; @interface CalendarManager : GenericManager /* * metodo che aggiunge un evento ad un calendario di nome Name nel giorno onDate. * L'evento da aggiungere viene recuperato tramite il dataSource che è quindi * OBBLIGATORIO (!= nil). * * Restituisce YES solo se il delegate è conforme al protocollo CalendarManagerDataSource. * NO altrimenti */ + (BOOL) addEventForCalendarWithName:(NSString *) name fromDate:(NSDate *)fromDate toDate: (NSDate *) toDate withDelegate:(id<CalendarManagerDelegate>) delegate; /* * metodo che aggiunge un evento per giorno compreso tra fromDate e toDate ad un * calendario di nome Name. L'evento da aggiungere viene recuperato tramite il dataSource * che è quindi OBBLIGATORIO (!= nil). * * Restituisce YES solo se il delegate è conforme al protocollo CalendarManagerDataSource. * NO altrimenti */ + (BOOL) addEventsForCalendarWithName:(NSString *) name fromDate:(NSDate *)fromDate toDate: (NSDate *) toDate withDelegate:(id<CalendarManagerDelegate>) delegate; @end @protocol CalendarManagerDelegate <NSObject> // viene inviato quando il calendario necessita informazioni sull' evento da aggiungere - (void) calendarManagerDidCreateEvent:(EKEvent *) event; @end the .m one // // CalendarManager.m // AppCampeggioSingolo // // Created by CreatiWeb Srl on 12/17/12. // Copyright (c) 2012 CreatiWeb Srl. All rights reserved. // #import "CalendarManager.h" #import "Commons.h" #import <objc/message.h> @interface CalendarManager () @end @implementation CalendarManager + (void)requestToEventStore:(EKEventStore *)eventStore delegate:(id)delegate fromDate:(NSDate *)fromDate toDate: (NSDate *) toDate name:(NSString *)name { if([eventStore respondsToSelector:@selector(requestAccessToEntityType:completion:)]) { // ios >= 6.0 [eventStore requestAccessToEntityType:EKEntityTypeEvent completion:^(BOOL granted, NSError *error) { if (granted) { [self addEventForCalendarWithName:name fromDate: fromDate toDate: toDate inEventStore:eventStore withDelegate:delegate]; } else { } }]; } else if (class_getClassMethod([EKCalendar class], @selector(calendarIdentifier)) != nil) { // ios >= 5.0 && ios < 6.0 [self addEventForCalendarWithName:name fromDate:fromDate toDate:toDate inEventStore:eventStore withDelegate:delegate]; } else { // ios < 5.0 EKCalendar *myCalendar = [eventStore defaultCalendarForNewEvents]; EKEvent *event = [self generateEventForCalendar:myCalendar fromDate: fromDate toDate: toDate inEventStore:eventStore withDelegate:delegate]; [eventStore saveEvent:event span:EKSpanThisEvent error:nil]; } } /* * metodo che recupera l'identificativo del calendario associato all'app o nil se non è mai stato creato. */ + (NSString *) identifierForCalendarName: (NSString *) name { NSString * confFileName = [self pathForFile:kCurrentCalendarFileName]; NSDictionary *confCalendar = [NSDictionary dictionaryWithContentsOfFile:confFileName]; NSString *currentIdentifier = [confCalendar objectForKey:name]; return currentIdentifier; } /* * memorizza l'identifier del calendario */ + (void) saveCalendarIdentifier:(NSString *) identifier andName: (NSString *) name { if (identifier != nil) { NSString * confFileName = [self pathForFile:kCurrentCalendarFileName]; NSMutableDictionary *confCalendar = [NSMutableDictionary dictionaryWithContentsOfFile:confFileName]; if (confCalendar == nil) { confCalendar = [NSMutableDictionary dictionaryWithCapacity:1]; } [confCalendar setObject:identifier forKey:name]; [confCalendar writeToFile:confFileName atomically:YES]; } } + (EKCalendar *)getCalendarWithName:(NSString *)name inEventStore:(EKEventStore *)eventStore withLocalSource: (EKSource *)localSource forceCreation:(BOOL) force { EKCalendar *myCalendar; NSString *identifier = [self identifierForCalendarName:name]; if (force || identifier == nil) { NSLog(@"create new calendar"); if (class_getClassMethod([EKCalendar class], @selector(calendarForEntityType:eventStore:)) != nil) { // da ios 6.0 in avanti myCalendar = [EKCalendar calendarForEntityType:EKEntityTypeEvent eventStore:eventStore]; } else { myCalendar = [EKCalendar calendarWithEventStore:eventStore]; } myCalendar.title = name; myCalendar.source = localSource; NSError *error = nil; BOOL result = [eventStore saveCalendar:myCalendar commit:YES error:&error]; if (result) { NSLog(@"Saved calendar %@ to event store. %@",myCalendar,eventStore); } else { NSLog(@"Error saving calendar: %@.", error); } [self saveCalendarIdentifier:myCalendar.calendarIdentifier andName:name]; } // You can also configure properties like the calendar color etc. The important part is to store the identifier for later use. On the other hand if you already have the identifier, you can just fetch the calendar: else { myCalendar = [eventStore calendarWithIdentifier:identifier]; NSLog(@"fetch an old-one = %@",myCalendar); } return myCalendar; } + (EKCalendar *)addEventForCalendarWithName: (NSString *) name fromDate:(NSDate *)fromDate toDate: (NSDate *) toDate inEventStore:(EKEventStore *)eventStore withDelegate: (id<CalendarManagerDelegate>) delegate { // da ios 5.0 in avanti EKCalendar *myCalendar; EKSource *localSource = nil; for (EKSource *source in eventStore.sources) { if (source.sourceType == EKSourceTypeLocal) { localSource = source; break; } } @synchronized(self) { myCalendar = [self getCalendarWithName:name inEventStore:eventStore withLocalSource:localSource forceCreation:NO]; if (myCalendar == nil) myCalendar = [self getCalendarWithName:name inEventStore:eventStore withLocalSource:localSource forceCreation:YES]; NSLog(@"End synchronized block %@",myCalendar); } EKEvent *event = [self generateEventForCalendar:myCalendar fromDate:fromDate toDate:toDate inEventStore:eventStore withDelegate:delegate]; [eventStore saveEvent:event span:EKSpanThisEvent error:nil]; return myCalendar; } + (EKEvent *) generateEventForCalendar: (EKCalendar *) calendar fromDate:(NSDate *)fromDate toDate: (NSDate *) toDate inEventStore:(EKEventStore *) eventStore withDelegate:(id<CalendarManagerDelegate>) delegate { EKEvent *event = [EKEvent eventWithEventStore:eventStore]; event.startDate=fromDate; event.endDate=toDate; [delegate calendarManagerDidCreateEvent:event]; [event setCalendar:calendar]; // ricerca dell'evento nel calendario, se ne trovo uno uguale non lo inserisco NSPredicate *predicate = [eventStore predicateForEventsWithStartDate:fromDate endDate:toDate calendars:[NSArray arrayWithObject:calendar]]; NSArray *matchEvents = [eventStore eventsMatchingPredicate:predicate]; if ([matchEvents count] > 0) { // ne ho trovati di gia' presenti, vediamo se uno e' quello che vogliamo inserire BOOL found = NO; for (EKEvent *fetchEvent in matchEvents) { if ([fetchEvent.title isEqualToString:event.title] && [fetchEvent.notes isEqualToString:event.notes]) { found = YES; break; } } if (found) { // esiste già e quindi non lo inserisco NSLog(@"OH NOOOOOO!!"); event = nil; } } return event; } #pragma mark - Public Methods + (BOOL) addEventForCalendarWithName:(NSString *) name fromDate:(NSDate *)fromDate toDate: (NSDate *) toDate withDelegate:(id<CalendarManagerDelegate>) delegate { BOOL retVal = YES; EKEventStore *eventStore=[[EKEventStore alloc] init]; if ([delegate conformsToProtocol:@protocol(CalendarManagerDelegate)]) { [self requestToEventStore:eventStore delegate:delegate fromDate:fromDate toDate: toDate name:name]; } else { retVal = NO; } return retVal; } + (BOOL) addEventsForCalendarWithName:(NSString *) name fromDate:(NSDate *)fromDate toDate: (NSDate *) toDate withDelegate:(id<CalendarManagerDelegate>) delegate { BOOL retVal = YES; NSDate *dateCursor = fromDate; EKEventStore *eventStore=[[EKEventStore alloc] init]; if ([delegate conformsToProtocol:@protocol(CalendarManagerDelegate)]) { while (retVal && ([dateCursor compare:toDate] == NSOrderedAscending)) { NSDate *finish = [dateCursor dateByAddingTimeInterval:oneDay]; [self requestToEventStore:eventStore delegate:delegate fromDate: dateCursor toDate: finish name:name]; dateCursor = [dateCursor dateByAddingTimeInterval:oneDay]; } } else { retVal = NO; } return retVal; } @end In practice, on my iphone I get the log: fetch an old-one = (null) 19/12/2012 11:33:09.520 AppCampeggioSingolo [730:8 b1b] create new calendar 19/12/2012 11:33:09.558 AppCampeggioSingolo [730:8 b1b] Saved calendar EKCalendar every time I add an event, then I look and I can not find it on iCal calendar event he added. On the iPhone of a friend of mine, however, everything is working correctly. I doubt that the problem stems from the code, but just do not understand what it could be. I searched all day yesterday and part of today on google but have not found anything yet. Any help will be greatly appreciated EDIT: I forgot the call wich is [CalendarManager addEventForCalendarWithName: @"myCalendar" fromDate:fromDate toDate: toDate withDelegate:self]; in the delegate method simply set title and notes of the event like this - (void) calendarManagerDidCreateEvent:(EKEvent *) event { event.title = @"the title"; event.notes = @"some notes"; }

  Read the article

• Why my shell program wont open the file got as argument in function "cat"

  - by anna karenina

  I included the code below, sorry to bother you with so much code. Argument parsing is ok, i checked it out with watches. I've put some printfs to check out where the problem may be and it seems that it wont open the file cat receives as argument. i called from shell like "cat -b file" #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <string.h> #define TRUE 0 #define FALSE 1 void yes(int argc, char *argv[]); int cat(int argc, char *argv[]); //#include "cat.h" //#include "yes.h" //#include"tee.h" char buf[50],c[10], *p2,*p, *pch; int count; char *matrix[20]; void yes(int argc, char *argv[]) { int i; // if (argc >= 2 && *argv[1] == '-') // { //printf("ERROR!"); //} //if (argc == 1) // { while (1) if (puts("y") == EOF) { perror("yes"); exit(FALSE); } // } while (1) for (i = 1; i < argc; i++) if (fputs(argv[i], stdout) == EOF || putchar(i == argc - 1 ? '\n' : ' ') == EOF) { perror("yes"); exit(FALSE); } //exit(TRUE); } int main(int argc, char *argv[]) { //p=(char *)malloc(sizeof(char)*50); do { fprintf (stderr, "$ "); fgets (buf,50,stdin); p=buf; fprintf (stderr, "Comanda primita de la tastatura: "); fputs (buf, stderr); int i=0,j=0; //strcpy(p,buf); strcpy(c,"\0"); while (buf[i] == ' ') { i++; p++; } if (buf[i] == '#') fprintf (stderr, "Nici o comanda, ci e un comentariu!\n"); else { j=0; while (buf[i] != ' ' && buf[i] != '\n') { i++; j++; } strncpy (c,p,j); fprintf (stderr, "%s\n",c); if (strcmp (c,"yes") == 0) { p2 = p+j+1; pch = strtok (p2," "); count = 0; while (pch != NULL) { //printf ("%s\n",pch); matrix[count] = strdup(pch); pch = strtok (NULL, " "); count++; } yes(count, matrix); fprintf (stderr, "Aici se va executa comanda yes\n"); } else if (strcmp (c,"cat") == 0) { p2 = p+j+1; pch = strtok (p2," "); count = 0; while (pch != NULL) { //printf ("%s\n",pch); matrix[count] = strdup(pch); pch = strtok (NULL, " "); count++; } cat(count,matrix); fprintf (stderr, "Aici se va executa comanda cat \n"); } else if (strcmp (c,"tee") == 0) { //tee(); fprintf(stderr, "Aici se va executa comanda tee\n"); } fprintf (stderr, "Aici se va executa comanda basename\n"); strcpy(buf,"\0"); } } while (strcmp(c, "exit") != 0); fprintf (stderr, "Terminat corect!\n"); return 0; } int cat(int argc, char *argv[]) { int c ; opterr = 0 ; optind = 0 ; char number = 0; char squeeze = 0; char marker = 0; fprintf(stderr,"SALUT< SUNT IN FUNCTIZE>\n"); while ((c = getopt (argc, argv, "bnsE")) != -1) switch (c) { case 'b' : number = 1; break; case 'n' : number = 2; break; case 'm' : marker = 1; break; case 's' : squeeze = 1; break; case 'E' : marker = 1; break; } if (optind + 1 != argc) { fprintf (stderr, "\tWrong arguments!\n") ; return -1 ; } FILE * fd = fopen (argv[optind], "r"); printf("am deschis fisierul %s ",argv[optind]); if (fd == NULL) { printf("FISIER NULL asdasdasdasdasd"); return 1; } char line[1025]; int line_count = 1; while (!feof(fd)) { fgets(line, 1025, fd); printf("sunt in while :> %s",line); int len = strlen(line); if (line[len - 1] == '\n') { if(len - 2 >= 0) { if(line[len - 2] == '\r') { line[len - 2] = '\0'; len -= 2; } else { line[len - 1] = '\0'; len -= 1; } } else { line[len - 1] = '\0'; len -= 1; } } if (squeeze == 1 && len == 0) continue; if (number == 1) { fprintf (stdout, "%4d ", line_count); line_count++; } else if (number == 2) { if (len > 0) { fprintf (stdout, "%4d ", line_count); line_count++; } else fprintf (stdout, " "); } fprintf(stdout, "%s", line); if (marker == 1) fprintf(stdout, "$"); fprintf(stdout, "\n"); } fclose (fd); return 0 ; }

  Read the article

• tableView:didSelectRowAtIndexPath: calls TTNavigator openURLAction:applyAnimated: — UITabBar and na

  - by vikingosegundo

  I have an existing iphone project with a UITabBar. Now I need styled text and in-text links to other ViewControllers in my app. I am trying to integrate TTStyledTextLabel. I have a FirstViewController:UITabelViewController with this tableView:didSelectRowAtIndexPath: - (void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath { NSString *url; if ([self.filteredQuestions count]>0) { url = [NSString stringWithFormat:@"%@%d", @"tt://question/", [[self.filteredQuestions objectAtIndex:indexPath.row] id]]; [[TTNavigator navigator] openURLAction:[[TTURLAction actionWithURLPath: url] applyAnimated:YES]]; } else { Question * q = [self.questions objectAtIndex:indexPath.row] ; url = [NSString stringWithFormat:@"%@%d", @"tt://question/", [q.id intValue]]; } TTDPRINT(@"%@", url); TTNavigator *navigator = [TTNavigator navigator]; [navigator openURLAction:[[TTURLAction actionWithURLPath: url] applyAnimated:YES]]; } My mapping looks like this: TTNavigator* navigator = [TTNavigator navigator]; navigator.window = window; navigator.supportsShakeToReload = YES; TTURLMap* map = navigator.URLMap; [map from:@"*" toViewController:[TTWebController class]]; [map from:@"tt://question/(initWithQID:)" toViewController:[QuestionDetailViewController class]]; and my QuestionDetailViewController: @interface QuestionDetailViewController : UIViewController <UIScrollViewDelegate , QuestionDetailViewProtocol> { Question *question; } @property(nonatomic,retain) Question *question; -(id) initWithQID:(NSString *)qid; -(void) goBack:(id)sender; @end When I hit a cell, q QuestionDetailViewController will be called — but the navigationBar wont @implementation QuestionDetailViewController @synthesize question; -(id) initWithQID:(NSString *)qid { if (self = [super initWithNibName:@"QuestionDetailViewController" bundle:nil]) { //; TTDPRINT(@"%@", qid); NSManagedObjectContext *managedObjectContext = [(domainAppDelegate*)[[UIApplication sharedApplication] delegate] managedObjectContext]; NSPredicate *predicate =[NSPredicate predicateWithFormat:@"id == %@", qid]; NSEntityDescription *entity = [NSEntityDescription entityForName:@"Question" inManagedObjectContext:managedObjectContext]; NSFetchRequest *request = [[NSFetchRequest alloc] init]; [request setEntity:entity]; [request setPredicate:predicate]; NSError *error = nil; NSArray *array = [managedObjectContext executeFetchRequest:request error:&error]; if (error==nil && [array count]>0 ) { self.question = [array objectAtIndex:0]; } else { TTDPRINT(@"error: %@", array); } } return self; } - (void)viewDidLoad { [super viewDidLoad]; [TTStyleSheet setGlobalStyleSheet:[[[TextTestStyleSheet alloc] init] autorelease]]; [self.navigationController.navigationBar setTranslucent:YES]; NSArray *includedLinks = [self.question.answer.text vs_extractExternalLinks]; NSMutableDictionary *linksToTT = [[NSMutableDictionary alloc] init]; for (NSArray *a in includedLinks) { NSString *s = [a objectAtIndex:3]; if ([s hasPrefix:@"/answer/"] || [s hasPrefix:@"http://domain.com/answer/"] || [s hasPrefix:@"http://www.domain.com/answer/"]) { NSString *ttAdress = @"tt://question/"; NSArray *adressComps = [s pathComponents]; for (NSString *s in adressComps) { if ([s isEqualToString:@"qid"]) { ttAdress = [ttAdress stringByAppendingString:[adressComps objectAtIndex:[adressComps indexOfObject:s]+1]]; } } [linksToTT setObject:ttAdress forKey:s]; } } for (NSString *k in [linksToTT allKeys]) { self.question.answer.text = [self.question.answer.text stringByReplacingOccurrencesOfString:k withString: [linksToTT objectForKey:k]]; } TTStyledTextLabel *answerText = [[[TTStyledTextLabel alloc] initWithFrame:CGRectMake(0, 0, 320, 700)] autorelease]; if (![[self.question.answer.text stringByTrimmingCharactersInSet:[NSCharacterSet whitespaceCharacterSet]] hasPrefix:@"<div"]) { self.question.answer.text = [NSString stringWithFormat:@"%<div>%@</div>", self.question.answer.text]; } NSString * s = [NSString stringWithFormat:@"<div class=\"header\">%@</div>\n%@",self.question.title ,self.question.answer.text]; answerText.text = [TTStyledText textFromXHTML:s lineBreaks:YES URLs:YES]; answerText.contentInset = UIEdgeInsetsMake(20, 15, 20, 15); [answerText sizeToFit]; [self.navigationController setNavigationBarHidden:NO animated:YES]; [self.view addSubview:answerText]; [(UIScrollView *)self.view setContentSize:answerText.frame.size]; self.view.backgroundColor = [UIColor whiteColor]; [linksToTT release]; } ....... @end This works quite nice, as soon as a cell is touched, a QuestionDetailViewController is called and pushed — but the tabBar will disappear, and the navigationItem — I set it like this: self.navigationItem.title =@"back to first screen"; — won't be shown. And it just appears without animation. But if I press a link inside the TTStyledTextLabel the animation works, the navigationItem will be shown. How can I make the animation, the navigationItem and the tabBar be shown?

  Read the article

• checking player prefs from unity in xcode

  - by user313100

  I made a simple scene that has some GUI buttons in Unity. When you press a button it will set a player preference to 1. I have a button for facebook, twitter and a store. In XCode, when the value hits 1, it switches to a new window with facebook, twitter or the store. My problem is that when I try and retrieve the player preferences in XCode, they always come up as null. To compound my confusion, my code seems to respond to the switch to 1 and it switches to the new window when the value hits 1. Any ideas why it manages to switch to the other window and why I am getting null values? - (void) applicationDidFinishLaunching:(UIApplication*)application { printf_console("-> applicationDidFinishLaunching()\n"); NSUserDefaults *userDefaults = [NSUserDefaults standardUserDefaults]; [userDefaults setInteger:0 forKey:@"Store"]; [userDefaults setInteger:0 forKey:@"Facebook"]; [userDefaults setInteger:0 forKey:@"Twitter"]; _storeWindow = [[UIWindow alloc] initWithFrame:[[UIScreen mainScreen] bounds]]; _facebookWindow = [[UIWindow alloc] initWithFrame:[[UIScreen mainScreen] bounds]]; _twitterWindow = [[UIWindow alloc] initWithFrame:[[UIScreen mainScreen] bounds]]; viewControllerSK = [[SKViewController alloc]initWithNibName:@"SKViewController" bundle:nil]; viewControllerFacebook = [[xutils_exampleViewController alloc]initWithNibName:@"FacebookViewController" bundle:nil]; viewControllerTwitter = [[xutils_exampleViewController2 alloc]initWithNibName:@"TwitterViewController" bundle:nil]; [_storeWindow addSubview:viewControllerSK.view]; [_facebookWindow addSubview:viewControllerFacebook.view]; [_twitterWindow addSubview:viewControllerTwitter.view]; [SKStoreManager sharedManager]; [self startUnity:application]; } - (void) applicationDidBecomeActive:(UIApplication*)application { printf_console("-> applicationDidBecomeActive()\n"); if (gDidResignActive == true) { UnitySetAudioSessionActive(true); UnityPause(false); } gDidResignActive = false; [self newTimer]; } - (void) applicationWillResignActive:(UIApplication*)application { printf_console("-> applicationDidResignActive()\n"); UnitySetAudioSessionActive(false); UnityPause(true); gDidResignActive = true; } - (void) applicationDidReceiveMemoryWarning:(UIApplication*)application { printf_console("WARNING -> applicationDidReceiveMemoryWarning()\n"); } - (void) applicationWillTerminate:(UIApplication*)application { printf_console("-> applicationWillTerminate()\n"); UnityCleanup(); } -(void)newTimer { NSTimer *theTimer = [self getTimer]; [theTimer retain]; [[NSRunLoop currentRunLoop] addTimer: theTimer forMode: NSDefaultRunLoopMode]; } -(NSTimer *)getTimer { NSTimer *theTimer; theTimer = [NSTimer scheduledTimerWithTimeInterval:1.0 target:self selector: @selector(onLoop) userInfo:nil repeats:YES]; return [theTimer autorelease]; } -(void)onLoop { NSUserDefaults *userDefaults = [NSUserDefaults standardUserDefaults]; //NSLog(@"FB: %@", [userDefaults integerForKey:@"Facebook"]); if ([userDefaults integerForKey:@"Store"] != 1 && [userDefaults integerForKey:@"Facebook"] != 1 && [userDefaults integerForKey:@"Twitter"] != 1) { UnityPause(FALSE); _window.hidden = NO; _storeWindow.hidden = YES; _facebookWindow.hidden = YES; _twitterWindow.hidden = YES; [_window makeKeyWindow]; } if ([userDefaults integerForKey:@"Store"] == 1) { UnityPause(TRUE); _storeWindow.hidden = NO; _window.hidden = YES; [_storeWindow makeKeyWindow]; } if ([userDefaults integerForKey:@"Facebook"] == 1) { UnityPause(TRUE); _facebookWindow.hidden = NO; _window.hidden = YES; [_facebookWindow makeKeyWindow]; } if ([userDefaults integerForKey:@"Twitter"] == 1) { UnityPause(TRUE); _twitterWindow.hidden = NO; _window.hidden = YES; [_twitterWindow makeKeyWindow]; } } -(void) dealloc { DestroySurface(&_surface); [_context release]; _context = nil; [_window release]; [_storeWindow release]; [_facebookWindow release]; [_twitterWindow release]; [viewControllerSK release]; [viewControllerFacebook release]; [viewControllerTwitter release]; [super dealloc]; }

  Read the article

• Problem with shared ssh keys

  - by warren

  Following the process I've used in other environments (http://www.trilug.org/pipermail/trilug/Week-of-Mon-20080602/054712.html), I've tried setting-up shared keys between my Mac and my CentOS 4 webserver. I've seen the same problem with my older Ubuntu 7.10 workstation trying to connect via keys to the same webserver. I have tried both dsa and rsa keytypes (sshkeygen -t <type>). The sshd_config file on my webserver seems to be allowing key-based logins: RSAAuthentication yes PubkeyAuthentication yes AuthorizedKeysFile .ssh/authorized_keys And my .ssh/authorized_keys has my dsa and rsa keys added. Where should I be looking for what to change next to make key-based logins "Just Work™"? Is it related to the line #UseDNS yes and sshd is trying to do a reverse-lookup on my IP, but cannot because it's NAT'd?

  Read the article

• What does NT_STATUS_BAD_NETWORK_NAME mean in Samba?

  - by Neil

  I set up a share like this: [global] security = user map to guest = Bad Password usershare allow guests = yes [vms] comment = VirtualBox Virtual Machines path = /home/neil/VirtualBox/HardDisks guest ok = yes read only = yes And when I access the share as myself, and type in my password, it works fine: $ smbclient //neil-ubuntu/vms -U neil Enter neil's password: Domain=[SHUTTERSTOCK] OS=[Unix] Server=[Samba 3.4.0] smb: \> But when I access it as guest, it doesn't work: $ smbclient //neil-ubuntu/vms -U guest Enter guest's password: Domain=[SHUTTERSTOCK] OS=[Unix] Server=[Samba 3.4.0] tree connect failed: NT_STATUS_BAD_NETWORK_NAME Regardless of what password I type in. Does anyone know why? Also, why does smbclient print such useless error messages?

  Read the article

• Can connect to Samba server but cannot access shares?

  - by jlego

  I have setup a stand-alone box running Fedora 16 to use as a file-sharing and web development server. Needs to be able to share files with a PC running Windows 7 and a Mac running OSX Snow Leopard. I've setup Samba using the Samba configuration GUI tool. Added users to Fedora and connected them as Samba users (which are the same as the Windows and Mac usernames and passwords). The workgroup name is the same as the Windows workgroup. Authentication is set to User. I've allowed Samba and Samba client through the firewall and set the ethernet to a trusted port in the firewall. Both the Windows and Mac machines can connect to the server and view the shares, however when trying to access the shares, Windows throws error 0x80070035 " Windows cannot access \SERVERNAME\ShareName." Windows user is not prompted for a username or password when accessing the server (found under "Network Places"). This also happens when connecting with the IP rather than the server name. The Mac can also connect to the server and see the shares but when choosing a share gives the error "The original item for ShareName cannot be found." When connecting via IP, the Mac user is prompted for username and password, which when authenticated gives a list of shares, however when choosing a share to connect to, the error is displayed and the user cannot access the share. Since both machines are acting similarly when trying to access the shares, I assume it is an issue with how Samba is configured. smb.conf: [global] workgroup = workgroup server string = Server log file = /var/log/samba/log.%m max log size = 50 security = user load printers = yes cups options = raw printcap name = lpstat printing = cups [homes] comment = Home Directories browseable = no writable = yes [printers] comment = All Printers path = /var/spool/samba browseable = yes printable = yes [FileServ] comment = FileShare path = /media/FileServ read only = no browseable = yes valid users = user1, user2 [webdev] comment = Web development path = /var/www/html/webdev read only = no browseable = yes valid users = user1 How do I get samba sharing working? UPDATE: Before this box I had another box with the same version of fedora installed (16) and samba working for these same computers. I started up the old machine and copied the smb.conf file from the old machine to the new one (editing the share definitions for the new shares of course) and I still get the same errors on both client machines. The only difference in environment is the hardware and the router. On the old machine the router received a dynamic public IP and assigned dynamic private IPs to each device on the network while the new machine is connected to a router that has a static public IP (still dynamic internal IPs though.) Could either one of these be affecting Samba? UPDATE 2: As the directory I am trying to share is actually an entire internal disk, I have tried to things: 1.) changing the owner of the mounted disk from root to my user (which is the same username as on the Windows machine) 2.) made a share that only included one of the folders on the disk instead of the entire disk with my user again as the owner. Both tests failed giving me the same errors regarding the network address. UPDATE 3: Not sure exactly what I did, but now whenever I try to connect to the share on the Windows 7 client I am prompted for my username and password. When I enter the correct credentials I get an access denied message. However I did notice that under the login box "domain: WINDOWS-PC-NAME" is listed. I believe this could very well be the problem. Any suggestions? UPDATE 4: So I've completely reinstalled Fedora and Samba now. I've created a share on the first harddrive (one fedora is installed on) and I can access that fine from Windows. However when I try to share any data on the second disk, I am receiving the same error. This I believe is the problem. I think I need to change some things in fstab or fdisk or something. UPDATE 5: So in fstab I mapped the drive to automount in a folder which works correctly. I also added the samba_share_t SElinux label to the mountpoint directory which now allows me to access the shares on the Windows machine, however I cannot see any of the files in the directory on the windows machine. (They are there, I can see them in the fedora file browser locally) UPDATE 6: Figured it out. See answer below

  Read the article

• Mysql stopped working

  - by tonymarschall

  Mysql is up and running on my system but i can not login with any user. I also cannot start/stop/status the server. All i got is: ERROR 1045 (28000): Access denied for user 'root'@'localhost' (using password: YES) /usr/bin/mysqladmin: connect to server at 'localhost' failed error: 'Access denied for user 'debian-sys-maint'@'localhost' (using password: YES) From the logs: Mar 24 08:30:13 debian /etc/mysql/debian-start[1074]: Upgrading MySQL tables if necessary. Mar 24 08:30:13 debian /etc/mysql/debian-start[1078]: /usr/bin/mysql_upgrade: the '--basedir' option is always ignored Mar 24 08:30:13 debian /etc/mysql/debian-start[1078]: Looking for 'mysql' as: /usr/bin/mysql Mar 24 08:30:13 debian /etc/mysql/debian-start[1078]: Looking for 'mysqlcheck' as: /usr/bin/mysqlcheck Mar 24 08:30:13 debian /etc/mysql/debian-start[1078]: Running 'mysqlcheck' with connection arguments: '--port=3306' '--socket=/var/run/mysqld/mysqld.sock' '--host=localhost' '--socket=/var/run/mysqld/mysqld.sock' '--host=localhost' '--socket=/var/run/mysqld/mysqld.sock' Mar 24 08:30:13 debian /etc/mysql/debian-start[1078]: /usr/bin/mysqlcheck: Got error: 1045: Access denied for user 'debian-sys-maint'@'localhost' (using password: YES) when trying to connect Mar 24 08:30:13 debian /etc/mysql/debian-start[1078]: FATAL ERROR: Upgrade failed Mar 24 08:30:13 debian /etc/mysql/debian-start[1111]: Checking for insecure root accounts.

  Read the article

• Problem with shared ssh keys

  - by warren

  Following the process I've used in other environments, I've tried setting-up shared keys between my Mac and my CentOS 4 webserver. I've seen the same problem with my older Ubuntu 7.10 workstation trying to connect via keys to the same webserver. I have tried both dsa and rsa keytypes (sshkeygen -t <type>). The sshd_config file on my webserver seems to be allowing key-based logins: RSAAuthentication yes PubkeyAuthentication yes AuthorizedKeysFile .ssh/authorized_keys And my .ssh/authorized_keys has my dsa and rsa keys added. Where should I be looking for what to change next to make key-based logins "Just Work™"? Is it related to the line, #UseDNS yes and sshd is trying to do a reverse-lookup on my IP, but cannot because it's NAT'd?

  Read the article

< Previous Page | 29 30 31 32 33 34 35 36 37 38 39 40  | Next Page >