Search Results

Search found 9823 results on 393 pages for 'media player'.

Page 330/393 | < Previous Page | 326 327 328 329 330 331 332 333 334 335 336 337  | Next Page >

• How to check DVD region settings in Window 7

  - by jmatthias

  I have installed Windows 7 on my laptop. When I put a movie in the DVD drive, the video player starts up and tells me 'THIS DISC IS NOT FORMATTED TO PLAY IN THIS REGION'. I have changed the DVD region a few times in the past but while I was in Windows XP I changed the region in Region 1. I cannot find how to check the DVD region setting in Windows 7 (it's not located on the hard properties page of the DVD anymore. Does anybody know how to check the DVD region in Windows 7? Update: If I connect an external USB DVD drive I can see the DVD region tab on the hardware properties dialog. I guess there is some compatibility problem with my internal DVD drive and Windows 7 (as I said I was able to inspect/change the DVD region in Windows XP). Solution: I think I had used LtnRPC in the past to remove the region from my DVD drive. It looks like Windows 7 does not like region free DVD drives (at least mine anyway). I was able to use LtnRPC to reset the region back to 1. I can now see the region tab on the DVD drives hardware properties.

  Read the article

• Using mixed disks and OpenFiler to create RAID storage

  - by Cylindric

  I need to improve my home storage to add some resilience. I currently have four disks, as follows: D0: 500Gb (System, Boot) D1: 1Tb D2: 500Gb D3: 250Gb There's a mix of partitions on there, so it's not JBOD, but data is pretty spread out and not redundant. As this is my primary PC and I don't want to give up the entire OS to storage, my plan is to use OpenFiler in a VM to create a virtual SAN. I will also use Windows Software RAID to mirror the OS. Partitions will be created as follows: D0 P1: 100Mb: System-Reserved Boot D0 P2: 50Gb: Virtual Machine VMDKs for OS D0 P3: 350Gb: Data D1 P1: 100Mb: System-Reserved Boot D1 P2: 50Gb: Virtual Machine VMDKs for OS D1 P3: 800Gb: Data D2 P1: 450Gb: Data D3 P1: 200Gb: Data This will result in: Mirrored boot partition Mirrored Operating system Mirrored Virtual machine O/S disks Four partitions for data In the four data partitions I will create several large VMDK files, which I will "mount" into OpenFiler as block-storage devices, combined into three RAID arrays (due to the differing disk sizes) In effect, I'll end up with the following usable partitions SYSTEM 100Mb the small boot partition created by the Windows 7 installer (RAID-1) HOST 50Gb the Windows 7 partition (RAID-1) GUESTS 50Gb Virtual machine Guest VMDK's (RAID-1) VG1 900Gb Volume group consisting of a RAID-5 and two RAID-1 VG2 300Gb Volume group consisting of a single disk On VG1 I can dynamically assign storage for my media, photographs, documents, whatever, and it will be safe. On VG2 I can dynamically assign storage for my data that is not critical, and easily recoverable, as it is not safe. Are there any particular 'gotchas' when implementing a virtual OpenFiler like this? Is the recovery process for a failing disk going to be very problematic? Thanks.

  Read the article

• Laptop recommendation - Portable Gaming

  - by ivan

  So, I'm looking for a new laptop (http://superuser.com/questions/116869/toshiba-satellite-u500-totally-damaged-lcd). My requirements for a new Laptop are: -good keyboard(illuminated) and touchpad (multi-media keys included, should be better than toshiba u500) -good graphics card, with system rating of 6.3 and up for gaming graphics (my Toshiba U500 has 6.3). I used to run some heavy games on my Toshiba U500 with ATI Mobility Radeon 4570 with 512 mb VRAM but the framerates are not that nice on high settings. -Decent CPU but I think all new Core i3, i5, i7 can run most of recent resource intensive games (My Toshiba U500 has a Core 2 Duo T6500, 2.13 Ghz) I'm also looking for a long-term reliability, good sound quality, lots of fast RAM of-course(4GB DDR3 - 1066Mhz and up) and a clear looking LED screen with a decent resolution. (I can accomodate a laptop with screen size of 13-inch upto 15.6 inch, and I don't want it to be heavy because I might be taking it outdoors) I'm actually impressed when I saw HP Pavilion DV6t but the screen resolution seems to be a little too small for 15.6 inch. The Pavilion DV3 are also good but I want to know if there other options. Looking for some opinions.. Thanks. :D

  Read the article

• "cannot receive new filesystem stream: invalid backup stream" error when unpacking flash archive on solaris 10

  - by Bovril

  I've searched around but i'm having no luck with some peculiar behavior with a flash archive. I'm using HP Server Automation 9.14 to deploy the OS. I'm creating a Solaris 10 flash archive to create a snapshot default build in our environment. I create the flash archive with # flar create -c -S -n g8-solaris10-u10 g8-solaris10-u10.flar It seems to create the file without any problems (exit status 0). When deploying to a new system (same hardware), it extracts to a point and then bails. The last error in the log I can see is Extracted 2047.00 MB ( 82% of 2488.98 MB archive) ERROR: Could not read file (172.27.118.100:/media/opsware/sunos/flar/g8-solaris10-u10.flar ERROR: Errors occurred during the extraction of flash archive. The file /tmp/flash_errors contains the list of errors encountered ERROR: Could not extract Flash archive ERROR: Flash installation failed The error log contained the following message cannot receive new filesystem stream: invalid backup stream A previous version of this flash archive (1.8gb) worked ok, so I suspect size may be a factor. The source system (the one the flash archive is an image of) is an HP BL460C GEN8 some more info below. OS version Info # uname -a SunOS testhostname 5.10 Generic_147441-01 i86pc i386 i86pc # who -r . run-level 3 Oct 15 08:15 3 0 S disks # echo | format Searching for disks...done AVAILABLE DISK SELECTIONS: 0. c0t0d0 <DEFAULT cyl 17841 alt 2 hd 255 sec 63> /pci@0,0/pci8086,3c06@2,2/pci103c,3355@0/sd@0,0 Specify disk (enter its number): Specify disk (enter its number): zpools # zpool list NAME SIZE ALLOC FREE CAP HEALTH ALTROOT rpool 136G 24.6G 111G 18% ONLINE - Zones # zoneadm list -cv ID NAME STATUS PATH BRAND IP 0 global running / native shared The file size of 2047 seems suspiciously close to 2048, which is concerning. Any help would be greatly appreciated. Thanks

  Read the article

• Lighttpd - byte range request doesn't work. can't stream mp4

  - by w-01

  Am attempting to use the lastest flowplayer. (if it could work it would be pretty awesome btw) http://flowplayer.org One of the cool things about it is it uses the new HTML5 video element and supports random seeking/playback. In order to do this, you need a byte range request capable server on the backend. Luckily I'm using Lighttpd 1.5.0 on the backend. Unfortunately the current behavior is that when I do a random seek, the video simply restarts itself from the beginning. the docs say: "For HTML5 video you don't have to do any client side configuration. If your server supports byte range requests then seeking should work on the fly. Most servers including Apache, Nginx and Lighttpd support this." On my page, using chrome web developer tools, i can see when the video is requested, the server response headers indicate it is able to acce[t byte ranges. Accept-Ranges:bytes when I do random seek in the player, I can see that that byte ranges are request appropriately in the request header: Range: bytes=5668-10785 I can also verify the moov atom is at the front of the video file. My question here is if there is something else on the lighttpd side i'm missing in order to enable byte-range requests? The reason i ask is because the current behavior suggests that the lighttpd simply doesn't understand the byte range request and is just reserving the video from the beginning. Update it's clearer to put this here. As per RJS' suggestion I ran a curl command. in the response it looks like lighttpd is working as expected. Content-Range: bytes 1602355-18844965/18844966 Content-Length: 17242611

  Read the article

• Long Gigabit Ethernet Run

  - by Timothy R. Butler

  I am trying to get an Gig-E network between two buildings that are approximately 260 ft. away. While some TRENDnet switches failed to be able to connect to each other over Cat 6 at that distance, two Netgear 5-port Gig-E switches do so just fine. However, it still fails after I put in place APC PNET1GB ethernet surge protectors at each end before the line connects to the respective switches. So I find myself wondering if I simply need to find a better surge protector that doesn't degrade the signal as much (if so, what kind would you recommend?) or if I should give up on copper and use fiber between the buildings. If I opt to go the latter route, I could really use some pointers. It looks like LC connectors are the most common, but I keep running into some others as well. A media converter on each end seems like the simplest solution, but perhaps a Gig-E switch with an SFP port would make more sense? Given a very limited budget, sticking with my existing copper seems best, but if it is bound to be a headache, a 100 meter fiber cable is something I think I can swing cost wise.

  Read the article

• Filtering bad requests from Apache -> logger -> rsyslog to syslog-ng on a remote logging server possible?

  - by zeyus

  EDIT: Thanks for the help Here is a quick idea of the setup: webserver X In apache httpd.conf: LogFormat "%v %h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" vcombined CustomLog "|/usr/bin/logger -p local6.info -t access " vcombined In rsyslog.conf: *.* @logserver Logserver syslog-ng.conf: ... parser p_apache {csv-parser(columns( "APACHE.VIRTUAL_HOST", "APACHE.CLIENT_IP", "APACHE.IDENT_NAME", "APACHE.USER_NAME", "APACHE.TIMESTAMP", "APACHE.REQUEST_URL", "APACHE.REQUEST_STATUS", "APACHE.CONTENT_LENGTH", "APACHE.REFERER", "APACHE.USER_AGENT", "APACHE.PROCESS_TIME", "APACHE.SERVER_NAME") # flags: # escape-none,escape-backslash,escape-double-char, # strip-whitespace flags(escape-double-char,strip-whitespace) delimiters(" ") quote-pairs('""[]') );}; ... source s_net { udp(ip(0.0.0.0) port(514) so_rcvbuf(1048576)); }; destination hosts_acc { file("/var/log/hosts/$HOST/${APACHE.VIRTUAL_HOST}_acc.log"); }; filter f_apacheacc { facility(local6); }; log { source(s_net); parser(p_apache); filter(f_apacheacc); destination(hosts_acc); }; ... The log's get there just fine, but there are a LOT of logs like the following: -rw------- 1 root root 5726 Apr 6 01:02 xc3\x9d\xc3\x9ed$yA;_acc.log -rw------- 1 root root 23435 Apr 6 01:06 \xc3\x9ed$yA;_acc.log -rw------- 1 root root 745 Apr 6 00:57 xc3\x9ed$yA;_acc.log -rw------- 1 root root 8440 Apr 5 22:50 \xc3\xaf_F\xc3\x95$yA;_acc.log -rw------- 1 root root 3112 Apr 6 00:58 xe2\x80\x94w\xe2\x80\x98\xc3\x9d\xc3\x9ed$yA;_acc.log -rw------- 1 root root 4220 Apr 5 22:03 xe2\x80\x98\twd\xc2\xa2\xc2\xb0\xc3\x96$yA;_acc.log -rw------- 1 root root 1055 Apr 5 22:03 xe2\x80\x98\xc2\x9dw\xc3\x94\xc3\xb4T\xc5\x93$yA;_acc.log -rw------- 1 root root 1821 Apr 6 00:58 \xe2\x80\x98\xc3\x9d\xc3\x9ed$yA;_acc.log -rw------- 1 root root 2875 Apr 6 01:02 xe2\x80\x98\xc3\x9d\xc3\x9ed$yA;_acc.log -rw------- 1 root root 3165 Apr 5 22:48 \xe2\x80\x99-w\xc3\xaf_F\xc3\x95$yA;_acc.log -rw------- 1 root root 3165 Apr 5 22:40 \xe2\x80\x99\xe2\x80\x9aw\xe2\x82\xac\xc2\xbd\xe2\x80\x9d($yA;_acc.log -rw------- 1 root root 15825 Apr 5 22:50 xe2\x80\x99\xe2\x80\x9aw\xe2\x82\xac\xc2\xbd\xe2\x80\x9d($yA;_acc.log -rw------- 1 root root 1055 Apr 5 22:39 \xe2\x80\x9aw\xe2\x82\xac\xc2\xbd\xe2\x80\x9d($yA;_acc.log -rw------- 1 root root 2110 Apr 5 22:50 xe2\x80\x9aw\xe2\x82\xac\xc2\xbd\xe2\x80\x9d($yA;_acc.log -rw------- 1 root root 2034 Apr 5 22:50 \xe2\x80\x9d($yA;_acc.log -rw------- 1 root root 4066 Apr 5 22:45 xe2\x80\x9d($yA;_acc.log -rw------- 1 root root 7212 Apr 6 13:30 \xe2\x80\xb9>$yA;_acc.log -rw------- 1 root root 3000 Apr 6 13:25 xe2\x80\xb9>$yA;_acc.log My question is where, and how can I filter these out, I don't want them on the filesystem (But actually I guess it wouldn't be a bad idea to keep them logged, but in their correct VHost file) Here is an example VHost <VirtualHost *:80> ServerAdmin [email protected] ServerName xxx.xx DocumentRoot /var/www/vhosts/xxx <Directory /var/www/vhosts/xxx> AllowOverride All Options All RewriteEngine on </Directory> </VirtualHost> And the default "catch-all" vhost at the bottom of the vhosts config file: <VirtualHost *:80> ServerName default ServerAlias * ServerAlias catchall.xxx.xx DocumentRoot /var/www/vhosts/nodomain <Directory "/var/www/vhosts/nodomain"> Options Indexes FollowSymLinks AllowOverride none Allow from All </Directory> CustomLog /dev/null combined ErrorLog /dev/null </VirtualHost> I had posted this in a related question but It's better in it's own question. Here are some examples from inside the log files r_acc.log: Apr 7 11:16:27 xxxxx access: r PC 5.0; eSobiSubscriber 2.0.4.16; .NET CLR 3.5.30729; .NET CLR 3.0.30729; .NET4.0C)" Apr 7 11:16:28 xxxxx access: r PC 5.0; eSobiSubscriber 2.0.4.16; .NET CLR 3.5.30729; .NET CLR 3.0.30729; .NET4.0C)" ######################## D46-28E2-0FBC95-78798EV\xe2\x80\x94w\xe2\x80\x98\xc3\x9d\xc3\x9ed$yA;_acc.log: Apr 7 14:54:06 xxxxx access: D46-28E2-0FBC95-78798EV\xe2\x80\x94w\xe2\x80\x98\xc3\x9d\xc3\x9ed$yA; B557000E-F20D-35DD-021A-9824EC-17A4AFV\xe2\x80\x94w\xe2\x80\x98\xc3\x9d\xc3\x9ed$yA; 3BD03D7B-EEFD-83FF-7599-B751AD-6F0A2EV\xe2\x80\x94w\xe2\x80\x98\xc3\x9d\xc3\x9ed$yA; 9CAE0724-D455-0B31-3378-871C11-BBD0A4V\xe2\x80\x94w\xe2\x80\x98\xc3\x9d\xc3\x9ed$yA; C1E24799-3979-2452-81-3BAA0FFD361F5A; 0E701CBC-5832-5AB6-D5-CFBF9BDE863EAA; 464714B1-B3E2-774A-A4-FEA612A46CEE06; 74C817B0-D081-D2CC-6D-C4EF0F1B4F49BB; 1338B1DE-67CD-977C-B35D-1F2C4441DD6A; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0; .NET CLR 1.1.4322; .NET CLR 3.5.30729; .NET CLR 3.0.30729; OfficeLiveConnector.1.5; OfficeLivePatch.1.3; .NET4.0C; BRI/2)" ######################## V\xe2\x80\x94w\xe2\x80\x98\xc3\x9d\xc3\x9ed$yA;_acc.log: Apr 7 14:55:04 xxxxx access: V\xe2\x80\x94w\xe2\x80\x98\xc3\x9d\xc3\x9ed$yA; FEEACE4F-092A-1D46-28E2-0FBC95-78798EV\xe2\x80\x94w\xe2\x80\x98\xc3\x9d\xc3\x9ed$yA; B557000E-F20D-35DD-021A-9824EC-17A4AFV\xe2\x80\x94w\xe2\x80\x98\xc3\x9d\xc3\x9ed$yA; 3BD03D7B-EEFD-83FF-7599-B751AD-6F0A2EV\xe2\x80\x94w\xe2\x80\x98\xc3\x9d\xc3\x9ed$yA; 9CAE0724-D455-0B31-3378-871C11-BBD0A4V\xe2\x80\x94w\xe2\x80\x98\xc3\x9d\xc3\x9ed$yA; C1E24799-3979-2452-81-3BAA0FFD361F5A; 0E701CBC-5832-5AB6-D5-CFBF9BDE863EAA; 464714B1-B3E2-774A-A4-FEA612A46CEE06; 74C817B0-D081-D2CC-6D-C4EF0F1B4F49BB; 1338B1DE-67CD-977C-B35D-1F2C4441DD6A; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0; .NET CLR 1.1.4322; .NET CLR 3.5.30729; .NET CLR 3.0.30729; OfficeLiveConnector.1.5; OfficeLivePatch.1.3; .NET4.0C; BRI/2)" ################### xc2\x90\xc3\x91\xc3\x94\xc2\xab$yA;_acc.log: Apr 7 19:48:39 xxxxx access: xc2\x90\xc3\x91\xc3\x94\xc2\xab$yA; 3C12D25C-9D40-91CF-1F40-AC-B1A083426DV-w\xc2\x90\xc3\x91\xc3\x94\xc2\xab$yA; D4713FA8-0142-A0C2-4812-BA-E03221005BV-w\xc2\x90\xc3\x91\xc3\x94\xc2\xab$yA; 199BAF2A-ECD5-39FA-65C3-E8-B107FAFF08V-w\xc2\x90\xc3\x91\xc3\x94\xc2\xab$yA; 384BDA70-9954-7744-05A0-C4-C7D9FEA685V-w\xc2\x90\xc3\x91\xc3\x94\xc2\xab$yA; EE7292A9-333C-AF70-5A7F-55-CAA7D0BA39V-w\xc2\x90\xc3\x91\xc3\x94\xc2\xab$yA; -AD7D48FA3A55-2A33-D10B-B4B66276D8B8; -166A9C6A2E71-24DF-A192-C8258AA4DE14; -00077C6C84E0-A302-4954-3D6D17C54D31; 3F56C318-EC3C-432B-680F-7E4BB2B852C4; SLCC1; .NET CLR 2.0.50727; .NET CLR 3.5.21022; .NET CLR 3.5.30729; .NET CLR 3.0.30729; .NET4.0C)" Apr 7 19:48:39 xxxxx access: xc2\x90\xc3\x91\xc3\x94\xc2\xab$yA; 3C12D25C-9D40-91CF-1F40-AC-B1A083426DV-w\xc2\x90\xc3\x91\xc3\x94\xc2\xab$yA; D4713FA8-0142-A0C2-4812-BA-E03221005BV-w\xc2\x90\xc3\x91\xc3\x94\xc2\xab$yA; 199BAF2A-ECD5-39FA-65C3-E8-B107FAFF08V-w\xc2\x90\xc3\x91\xc3\x94\xc2\xab$yA; 384BDA70-9954-7744-05A0-C4-C7D9FEA685V-w\xc2\x90\xc3\x91\xc3\x94\xc2\xab$yA; EE7292A9-333C-AF70-5A7F-55-CAA7D0BA39V-w\xc2\x90\xc3\x91\xc3\x94\xc2\xab$yA; -AD7D48FA3A55-2A33-D10B-B4B66276D8B8; -166A9C6A2E71-24DF-A192-C8258AA4DE14; -00077C6C84E0-A302-4954-3D6D17C54D31; 3F56C318-EC3C-432B-680F-7E4BB2B852C4; SLCC1; .NET CLR 2.0.50727; .NET CLR 3.5.21022; .NET CLR 3.5.30729; .NET CLR 3.0.30729; .NET4.0C)" Thanks

  Read the article

• Slow transfer speed between two servers

  - by Linux Guy

  I have two servers both network cards speed is 10Gbps The inbound bandwidth between two servers is 10Gbps , the outbound bandwidth internet bandwidth is 500Mpbs Both servers using public ip addresses in public and private network Both servers transfer and connection on nginx port , and the server B used for streaming media , like youtube stream videos I check the transfer speed using iperf utility From Server A to Server B # iperf -c 0.0.0.1 -p 8777 ------------------------------------------------------------ Client connecting to 0.0.0.1, TCP port 8777 TCP window size: 85.3 KByte (default) ------------------------------------------------------------ [ 3] local 0.0.0.0 port 38895 connected with 0.0.0.1 port 8777 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.8 sec 528 KBytes 399 Kbits/sec My Current Connections in Server B # netstat -an|grep ":8777"|awk '/tcp/ {print $6}'|sort -nr| uniq -c 2072 TIME_WAIT 28 SYN_RECV 1 LISTEN 189 LAST_ACK 139 FIN_WAIT2 373 FIN_WAIT1 3381 ESTABLISHED 34 CLOSING Server A Network Card Information Settings for eth0: Supported ports: [ TP ] Supported link modes: 100baseT/Full 1000baseT/Full 10000baseT/Full Supported pause frame use: No Supports auto-negotiation: Yes Advertised link modes: 10000baseT/Full Advertised pause frame use: No Advertised auto-negotiation: Yes Speed: 10000Mb/s Duplex: Full Port: Twisted Pair PHYAD: 0 Transceiver: external Auto-negotiation: on MDI-X: Unknown Supports Wake-on: d Wake-on: d Current message level: 0x00000007 (7) drv probe link Link detected: yes Server B Network Card Information Settings for eth2: Supported ports: [ FIBRE ] Supported link modes: 10000baseT/Full Supported pause frame use: No Supports auto-negotiation: No Advertised link modes: 10000baseT/Full Advertised pause frame use: No Advertised auto-negotiation: No Speed: 10000Mb/s Duplex: Full Port: Direct Attach Copper PHYAD: 0 Transceiver: external Auto-negotiation: off Supports Wake-on: d Wake-on: d Current message level: 0x00000007 (7) drv probe link Link detected: yes The problem is : as you can see from iperf utility, the transfer speed from server A to server B slow when i restart network service the connection will be ok , after 2 minutes , it's getting slow How could i troubleshoot slow speed issue and fix it in server B ? Notice : if there any other commands i should execute in servers for more information, so it might help resolve the problem , let me know in comments

  Read the article

• Bridged network on OS X only gets UDP broadcast traffic

  - by a paid nerd

  I've created a bridged network Mac OS X 10.8.5 using ifconfig and TUNTAP for OS X to bridge my wireless connection, en0, with a virtual interface, tap0, which I can use for guest VMs: $ sudo sysctl -w net.inet.ip.forwarding=1 $ sudo sysctl -w net.link.ether.inet.proxyall=1 $ sudo sysctl -w net.inet.ip.fw.enable=1 $ sudo ifconfig bridge0 create $ sudo ifconfig bridge0 addm en0 addm tap0 $ sudo ifconfig bridge0 up $ ifconfig en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 ether 28:cf:xx:xx:xx:xx inet6 xxxx::xxxx:xxxx:xxxx:xxxx%en0 prefixlen 64 scopeid 0x4 inet 192.168.100.64 netmask 0xffffff00 broadcast 192.168.100.1 media: autoselect status: active bridge0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 ether ac:de:xx:xx:xx:xx Configuration: priority 0 hellotime 0 fwddelay 0 maxage 0 ipfilter disabled flags 0x2 member: en0 flags=3<LEARNING,DISCOVER> port 4 priority 0 path cost 0 member: tap0 flags=3<LEARNING,DISCOVER> port 8 priority 0 path cost 0 tap0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500 ether ca:3d:xx:xx:xx:xx open (pid 88244) However, if I tcpdump -i tap0, I only see broadcast traffic. Shouldn't I see a mirror of everything on en0? (192.168.100.33, the host doing the broadcasting, is another unrelate, noisy server on my LAN.) (I asked a similar question here and will probably close it.)

  Read the article

• Windows 8 & Hyper-V Can't Bridge Wifi Connection

  - by xinunix

  So I have an odd issue that I can't quite figure out... I am running Windows 8 Enterprise on a Dell 6420 laptop. I have a Broadcom 802.11n wireless adapter. I am connected to an home router (Netgear WNDR3700) that is connected to the internet. It is a very simple home network setup. I am trying to stand-up a few VMs in Hyper-V and want the VMs to be able to access the internet over my wireless connection. I have found numerous examples of how to set this up using both External and Internal Virtual Switches but have yet to be able to get it to work on my machine. I have narrowed the issue down to the fact that my host machine always loses internet connection when I bridge my wifi connection (both when it is bridged automatically by windows when I setup an external virtual switch bound to the wifi adapter or if I do it manually by creating an internal virtual switch, right click on it and my wifi network and select "Bridge Connections".) In both cases after the bridge is established, my host machine can no longer connect to the internet. I am not sure where to start with troubleshooting this problem. After the bridge is setup, an ipconfig shows all netowrk devices on the machine as "Media Disconnected". I do know that the wireless adapter is connected to the router b/c it shows the connection as active and full-strength. The only thing I can possibly think of is that this machine also has the Cisco VPN client installed on it which installs a Cisco Virtual Network Adapter. Is it possible that this Cisco Virtual Adapter is causing me issues when I try to bridge? I saw some people had a similar issue with a VirtualBox virtual adapter when trying to share via Hyper-V. Any thoughts or suggestions on how to troubleshoot?

  Read the article

• needing storage integrity (write/read) test - for BASH

  - by Mr. Bash

  In need of shell scripts / bash commands to verify data integrity of local harddrives, usb-drives, etc, ... Like the famous www.heise.de/download/h2testw; or something that is at least common within repositories. (h2testw writes a specific datastring over and over onto the medium, then reads it again to verify if it was written correctly and displays write/read time/speed.) please no dd if=/dev/random of=/dev/sdx bs=1k && dd if=/dev/sdx of=/dev/null bs=1k since it won't verify if everything was written correctly. It is only a test if read/write is successful to the device. So far, I'm not too happy with badblocks -w -v /dev/sdx1 either, since it seems rather slow and I don't know what it exactly writes, and if it considers wear-leveling on flash media. There is also a program named F3 http://oss.digirati.com.br/f3/ that needs to be compiled. Designed after h2testw, the concept sounds interesting, i'd just rather have it as a ready to go bash script.

  Read the article

• How to generate thumbnails for less common video containers (mkv, ogm, mp4, flv, rmvb and mov) in wi

  - by fluxtendu

  So how to generate thumbnails for these containers? I know that the install of "DivX Plus Tech Preview: MKV on Windows 7" does it for MKV. But I think that only some registry changes are really necessary and I want it for other containers. If it's possible to avoiding the install of (always bloated) codecs packs it would be nice... Maybe only installing ffdshow or essential and separated codecs. (some time ago I have try reg files for vista without success...) Update: I have installed Win7codecs & tweaked a little its settings and I got almost everything I want. (I have also re-installed the relevant part of the divx plus tech preview to get something else than an all black preview for MKV) Issues that I still want to resolve: Find a cleaner & lighter method Almost all my rmvb and mov files got an all black preview (installing real media/quick time alternative doesn't help, is it the same with the officials?) With almost all containers (avi, mkv, ogm, mpg), I have (few) random files that don't get the preview. I could play them in WMP or another player and don't have found a pattern in the codecs used. All wmv, flv and mp4 have previews but I have less files in these containers. (I clear my thumbnails cache to test them) More generally I would like to understand how windows handle the containers & codecs to generate the previews. And a software that let me choose arbitrarily the pictures previewed would be convenient too

  Read the article

• What service do you use for music on hold?

  - by Russ Warren

  This may not be a sysadmin question for some, but it is definitely a hurdle I have to jump as the sysadmin for my company. We recently rolled-out a company wide VoiP system (Switchvox, to be exact) that has come preloaded with some royalty-free music on hold. Our customers have been complaining that the music on hold sounds like "funeral music." This may be the case (although I wouldn't want it played at my funeral), but it is all we have and we aren't willing to be sued over using music that isn't properly licensed. So, that brings me to the question asked in the title -- what and/or how do you provide decent music on hold? I'm assuming many people here use a PBX that allows customized music, so this has to apply to many of you. We've been looking at some sites that allow you to download royalty-free music for a one-time fee, but the music seems...lame. Something like a one-year subscription from ibaudio.com seems to be the best bet so far. Have you been able to discover something a little more mainstream for a decent licensing fee? Thank you. EDIT: Our PBX allows the playback of MP3 and OGG files, but does not allow streaming of a live audio source, Internet-based or otherwise. It also does not allow the use of a "line-in" source such as a CD player or radio. Don't let this stop you from sharing your setup, though. I'm interested in hearing what everyone uses!

  Read the article

• How do I diagnose a bottleneck in an Intel Atom based Ubuntu server?

  - by Jon Cage

  I have a small media server at home which has software raid and a gigabit link to the rest of my network. For some reason though, I only get ~10MB/s transfers when copying to/from the server. I use software RAID5 (mdadm) over 4 1TB disks. On top of that I then use LVM to give me a huge pool of disk space which is then split up into multiple partitions which can be resized as and when they need it. I'm guessing this it most likely the cause, but I'd like to know for sure where the root cause is. So, how can I benchmark network throughput (Windows 7 desktop <- Ubuntu server) and hard disk performance to try and identify where my bottleneck might be? [Edit] If anyone's interested, the motherboard is an Intel Desktop Board D945GCLF2. So that's a 300 series Atom processor with the Intel® 945GC Express Chipset [Edit2] I feel like such a fool! I just checked my desktop and I had the slower of the two onboard NICs plugged in so the server is probably not at fault here. Transferring a copy of ubuntu off the server I get ~35-40MB/s according to Windows 7. I'll do those HD tests when I get a chance though (just for completeness).

  Read the article

• Windows 2008 Standard upgrade to Windows 2008 Enterprise failure

  - by Archit Baweja

  Sidestory, I was in the process of setting up a second Exchange 2010 server for DAG support, when I realized that my box needed Windows 2008 Enterprise edition. The box currently has Windows 2008 Standard Windows update including SP2 Exchange 2010 with CAS, HT, Mailbox roles Domain Services role File Services role. When I try to upgrade to Windows 2008 Enterprise, I initially got a "your current version of windows is more recent than the intallation media", something to that effect. My first guess was it may be SP2 related, so I uninstalled SP2, restarted and tried again. This time it gave me an error to the effect Windows could not configure one or more windows components. Please restart and try the update again. This was at the last stage of the Windows 2008 Enterprise install when it says "Completing installation". So I removed Domain Services role (including demoting it as a DC). However I get the same error again. Anyone see something like this before and have any suggestions? Also , is there a log file the windows upgrade program spits out that I can consult to see what component exactly is interfering? Update 1 Based on some googling I finally found the setup log file, and it seems that Windows setup had an issue determining the .Net 3.0 "feature" being installed or uninstalled. So based of of a win7/vista technet article I'm going to retry the upgrade after removing the .Net 3.0 feature.

  Read the article

• nginx not serving admin static files?

  - by toto_tico

  First, I want to clarify that this error is just for the admin static files. This means my problem is specific just to the static files that corresponds to the Django admin. The rest of the static files are working perfect. Basically my problem is that for some reason I cannot access those admin static files with the ngix server. It works perfect with the micro server of Django and the collect static is doing its job. This means it is putting the files on the expected place in the static folder. The urls are correct but I cannot even access the admin static files directly, but the others I can. So, for example, I am able to access this url (copying it in the browser): myserver.com:8080/static/css/base/base.css but i am not able to access this other url (copying it in the browser): myserver.com:8080/static/admin/css/admin.css I also tried to copy the admin/ directory structure into other_admin_directory_name/. Then I can access myserver.com:8080/static/other_admin_directory_name/css/admin.css Then, it works. So, I checked permissions and everything is fine. I tried to change ADMIN_MEDIA_PREFIX = '/static/admin/' to ADMIN_MEDIA_PREFIX = '/static/other_admin_directory_name/', it doesn't work. This a mistery in itself that I am exploring but still no luck. Finally, and it seems to be an important clue: I tried to copy the admin/ directory structure into admin_and_then_any_suffix/. Then I cannot access myserver.com:8080/static/admin_and_then_any_suffix//css/admin.css So, if the name of the directory starts with admin (for example administration or admin2) it doesn't work. * added thanks to sarnold observation ** the problem seems to be in the nginx configuration file /etc/nginx/sites-available/mysite location /static/admin { alias /home/vl3/.virtualenvs/vl3/lib/python2.7/site-packages/django/contrib/admin/media/; }

  Read the article

• Virtual (ESXi4) Win 2k8 R2 server hangs when adding role(s)

  - by Holocryptic

  I'm trying to provision a 2k8r2 Enterprise server in ESXi4. The OS installation goes fine, VMware tools, adding to domain, updates. All the basic stuff before you start adding Roles and Features. I've had this happen on two attempts already, and I'm not sure where the problem might be. I don't think it's hardware, because I have another 2k8r2 Standard server that's running fine. The only real difference is the install media. The server that's working was installed using a trial ISO and license. The one I'm having problems with is a full MAK installation. When I go to add a Role (the last case was Application Server) it gets all the way to "collecting installation results" before it hangs. CPU utilization in the vSphere client shows little spikes of activity with flatlines inbetween, but the whole console is locked up. The only way to release it is to power off and bring it back up. When you go to look at the added roles after bringing it back up, it shows that it is installed, but I don't trust that something didn't get wedged in all of that. The first install I did was with Thin Disk provisioning. The second attempt was with regular disk provisioning. In both cases 4GB of RAM, 2 vCPUs. VMware host is a HP Proliant DL380 G6, RAID-1 OS, RAID-5 data volume. 12 GB RAM. Has anyone else had this problem, or know where I should start poking around?

  Read the article

• Intel Atom overheating in ASUS EEE Box 1501P

  - by Sergey L.

  I have had an ASUS EEE Box 1501P for just a little bit over a year. Of course it breaks 2 months after the warranty runs out. http://www.asus.com/Eee/EeeBox_PC/EeeBox_PC_EB1501P/ I have been using the box as a Home Media Center. Running mostly 24/7 often pausing a video overnight. Since last week the fan started running extremely loud. After some digging I found that the Intel Atom CPU in it is overheating and the built-in sensor is reporting temperatures way over 105°C. This got me worried, so I took the unit apart. Completely vacuumed the heat sink, oiled the fan, but the unit is still showing the same behaviour. After turning it on and just observing the hardware monitor in the BIOS the temperature slowly rises from 40°C to over 95°C in appx 5 min. I am running the newest BIOS and a lightweight Linux OPENELEC OS with XBMC on it. Now I am wondering if it could be a faulty heat sensor in the Atom. Recommended running temperature is up to 85°C, but I have not detected any performance hits when running at the above mentioned 105°C and there seem to be no software faults. How can an Atom with an attached heat sink and a fan running at full capacity even get this hot in the first place at 0 load? Aren't those things designed to generate virtually no heat? Could it be a faulty heat sensor? What shall I try to fix this? I would prefer not to damage the CPU, since it is hard fused into the motherboard and cannot be replaced. I could remove the heat pipe/heat sink, but it is getting hot, so heat is properly transferring from the CPU to the heat pipe, the fan is running at full capacity, is recently oiled and warm air is making it out of the exhaust. Edit: One more note: The North-bridge (or whatever it is called nowadays) is on the same heat pipe.

  Read the article

• Windows 7 "freezes" (chills?), and then "unfreezes" after about 1 minute.

  - by gbc001

  Hi, I have an Acer Timeline 1810T netbook (4GB RAM) with Windows 7 x64. About once or twice a day, it "freezes" - the reason I put this in quotation marks is that it does not really freeze, as I you cant move mouse, etc. I can move my mouse and jump between different applications, but I cant use the applications for anything. So I can jump between notepad and Firefox, but I cant browse to a new web page. I have been trying to determine the source of this misery for a while now, and I suspect it has something to do with the hard drive - indirectly if not directly. Here are some screen shots of the resource monitor during a "freeze" and during normal operation: Freeze: http://imgur.com/Gcgq1.jpg Normal operation: imgur.com/mlHaI.jpg As you can see, CPU is fine during freeze, but the disk is going bananas.. Does anyone have an idea of what these reading means, or about the problem in general? There seems to be no specific activity that sets this off - it can be during browsing, or during media playback with nothing else open. The fact that I can see navigate to applications but not use them might suggest a hard drive problem as well? Maybe I can access the stuff that is in RAM, but not anything that would require interaction with the drive.. Very appreciative of any help!

  Read the article

• Is it possible to re-cab an Administrative Install Point?

  - by Nathaniel Bannister

  We have Acrobat 8 Pro at work, and our media was painfully out of date. Rather than install all of the machines at 8.0.0 and then do the 6 or 7 consecutive reboots adobe expects you to be ok with I decided I'd integrate the .msp files into the installer. After reading up on it, I figured out the exact patch order that adobe required, extracted my cd to an Administrative install point, and ran the patches against it: msiexec /a AcroPro.msi /p AcrobatUpd810_efgj_incr.msp TARGETDIR="C:\Acrobat8" /log "output.log" msiexec /a AcroPro.msi /p AcrobatUpd811_all_incr.msp TARGETDIR="C:\Acrobat8" /log "output.log" msiexec /a AcroPro.msi /p AcrobatUpd812_all_incr.msp TARGETDIR="C:\Acrobat8" /log "output.log" msiexec /a AcroPro.msi /p AcrobatUpd813_all_incr.msp TARGETDIR="C:\Acrobat8" /log "output.log" msiexec /a AcroPro.msi /p AcrobatUpd816_all_incr.msp TARGETDIR="C:\Acrobat8" /log "output.log" msiexec /a AcroPro.msi /p AcrobatUpd817_all_incr.msp TARGETDIR="C:\Acrobat8" /log "output.log" msiexec /a AcroPro.msi /p AcrobatUpd820_all_incr.msp TARGETDIR="C:\Acrobat8" /log "output.log" msiexec /a AcroPro.msi /p AcrobatUpd822_all_incr.msp TARGETDIR="C:\Acrobat8" /log "output.log" msiexec /a AcroPro.msi /p AcrobatUpd823_all_incr.msp TARGETDIR="C:\Acrobat8" /log "output.log" msiexec /a AcroPro.msi /p AcrobatUpd825_all_incr.msp TARGETDIR="C:\Acrobat8" /log "output.log" msiexec /a AcroPro.msi /p AcrobatUpd826_all_incr.msp TARGETDIR="C:\Acrobat8" /log "output.log" Now I have a AIP that is fully patched to 8.2.6 (Tested working prior to attempting to CAB it), but is absolutely huge (1.2gb) what I would like to do is take the folders within the AIP and put them back into a cab file for the sake of convenience in transferring the files around. I tried the command: cscript "C:\Program Files\Microsoft SDKs\Windows\v7.0\Samples\sysmgmt\msi\scripts\WiMakCab.vbs" AcroPro.msi Data1 /L /C /S Per the guide I was using, while this did produce the cab file I Wanted, however the resulting MSI fails to install with an error 2602: It's been a while since I've done something like this, and it's probably a glaring oversight on my part, but any insight would be much appreciated.

  Read the article

• How do I install a different OS on a Compaq Presario cq56 with preinstalled SuSE 11?

  - by McCoy

  Thing is, I don't have a clue of Linux systems, I usually use WinXP. Bought a notebook with SuSE 11 on it, because I have my XP licence and thought I could install that if I found the chipset drivers for the hardware (which I'm not completely sure I have the right versions of). Then I thought I'd give it a shot with the SuSE, looked nice enough. But I can't get my external hd to work (tried force mount) and the banshee doesn't do anything like playing video. Since that is one of the two main purposes of this notebook, I need to get that to work. Tried downloading VLC player, but that only works with SuSE 11.1 upwards. So I downloaded a SuSE 11.3 and burned the iso. But surprise, no way the notebook would boot from cd. Same with the XP cd (considered setting up a dual boot). And no, I can't get to BIOS to reset to default, either. So I can basically do nothing else than going online with this thing and that's not enough for me (gamer in withdrawal, yikes!). I need at least to get to my firefox profile on the external hd and be able to watch video. Can somebody please help me? I think at this point I'd prefer to install XP and MAYBE the SuSE 11.3 after that. I'm not a native speaker, so please speak plainly, thanks. :) Edit: if this is impossible, could someone please help me with the external hd mount and video playback? Edit: Found out how to boot from cd by now. But still no XP, because I get bluescreen after bluescreen while setup is loading files. I guess it's the missing SATA drivers...

  Read the article

• Huge or minimal performance hit running game servers on a Virtual Machine? [closed]

  - by Damainman

  I have a two dedicated servers to choose from depending on which one would do a better job. I plan on updating the Hard Drive space and RAM at a later date depending on how I move forward. Server 1: 500GB Hard Drive 8GB RAM 2x 64bit Intel Xeon L5420(Quad Core) @ 2.50Ghz Server2: 500GB Hard Drive 8GB RAM 2x 64bit Intel Xeon E5420(Quad Core) @ 2.50GHz I want to run a virtual machine that will host about 10 game servers, with about 16 active slots per server. It will be a mix and match from: Minecraft Counter Strike( 1.6, Source, Global Offensive) Battlefield Team Fortress I know the general consensus is virtualization is a horrible idea if you plan on running virtual servers on them. The issue is, the discussions I read do not really clearly state whether they are speaking about a virtual server running inside an OS(ie: VMware Player running on Windows with the game server in a VM) or a Hypervisor such as Xen Cloud Platform. I am trying to get a definite answer on how feasible the above would be and how much of a performance hit it might be if the VM running the game servers is on a hypervisor such as Xen Cloud Platform. My initial research lead me to believe that there wouldn't be a performance hit since the virtualization is different than running it via inside of a OS.

  Read the article

• Proper 16:9 video size for non-HD 4:3 video (for youtube/vimeo)

  - by Xeoncross

  Since High Definition video came out on all the online sites it has changed the default aspect ratio of the player from 4:3 to 16:9. This means that for people posting SD video you have to resize some of your videos to get them to fit right. For example, NTSC DVD quality (aka 480i/p) is 720x480 pixels (width x height). However, low-end High Definition (720i/p) is 1280x720. Resolution Chart Anyway, now that the video players are built for HD you will find that uploading standard quality videos will result in videos that are "letter boxed" which means they have extra black bars on the top and bottom (or sides). Correct me if I'm wrong, but in order to get a 720x480 video to fit a box that is designed for HD the best practice would be to crop some of it off so that it fits as 720x404 since: 16/9 = 1.78 (1.7777777777778) 720/405 = 1.78 405x1.78 = 720.9 The same would stand for 640x480 (old TV quality) video that would need to be 640x360 correct? I'm asking because I'm not sure about all this and whether this is the proper way to fix these letter-boxing/display problems.

  Read the article

• Tell VLC where to look for plugins.dat file

  - by puk

  I am trying to build vlc from source (I will include installation script below), but when I try to run vlc I get the following error main libvlc warning: cannot read /home/user/downloads/vlc3/vlc/src/.libs/vlc/plugins/plugins.dat (No such file or directory) Why is it even looking in that non existant directory? The plugins.dat file is in /usr/lib/vlc/plugins/. I tried export VLC_PLUGIN_PATH=/usr/lib/vlc/plugins/ But it still looks in that non existent path. I can create a symbolic link, but that is a terrible way to do it. If in 6 months I delete my downloads folder, all of a sudden my vlc will break. Here is the script I am running to install: ./configure --enable-rpi-omxil --enable-dvbpsi --enable-x264 --enable-xcb --with-x --enable-xvideo --enable-sdl --enable-avcodec --enable-avformat --enable-swscale --enable-mad --enable-a52 --enable-libmpeg2 --enable-dvdnav --enable-faad --enable-vorbis --enable-ogg --enable-theora --enable-mkv --enable-freetype --enable-fribidi --enable-speex --enable-flac --enable-live555 --enable-caca --enable-skins2 --enable-alsa --enable-ncurses --enable-debug --enable-lirc --enable-live555 --enable-shout --enable-taglib --enable-vcdx --enable-realrtsp --enable-svg --enable-dvdread --enable-dc1394 --enable-twolame --enable-dirac --enable-aa --enable-jack --enable-bluray --enable-opencv --enable-sftp --enable-pulse --enable-projectm --enable-vsxu --enable-atmo --enable-glspectrum '--with-extra-libs=/usr/local/lib' '--with-extra-includes=/usr/local/include' '--x-libraries=/usr/local/lib' '--x-includes=/usr/local/include' '--prefix=/usr/local' '--mandir=/usr/local/man' '--infodir=/usr/local/info/' EDIT: I am using the following version: VLC media player 2.2.0-git Weatherwax (revision 2.1.0-git-1168-g5804dd1) And the --plugin-path option is no longer supported.

  Read the article

• Error when attempting to do a differential or incremental backup of Exchange using ntbackup

  - by voon

  Hi folks, We're running Small Business Server 2003 here. I was reviewing our backup procedures lately and noticed in the ntbackup logs that the differential backups of Exchange were failing with the error: (SERVERNAME)\Microsoft Information Store\First Storage Group is not a valid drive, or you do not have access. A quick search of google found this MS KB article: http://support.microsoft.com/kb/555613 However, both of the suggested fixes don't to apply to our problem. First solution is to make sure the backup media is formatted and has adequate space. Well, our backup target is a 1 TB external hard drive with about 600 gigs of free space. (A full backup of our Exchange DB is currently around 5 GB) The second suggested fix is to "perform a full backup before trying to do incremental". And again, that can't it because we are doing full backups twice a week. There are no errors in the application log, just entries for ntbackup starting and ending. I've also tested doing an differential & incremental backup onto the server's internal drive, which unsurprising still did not work. I could get around this problem by always doing a full backup of Exchange but I kind of like the idea of being space efficient with doing differential backups. Anyone got any ideas?

  Read the article

< Previous Page | 326 327 328 329 330 331 332 333 334 335 336 337  | Next Page >