Search Results

Search found 10494 results on 420 pages for 'beyond the documentation'.

Page 332/420 | < Previous Page | 328 329 330 331 332 333 334 335 336 337 338 339  | Next Page >

• Oracle Flashback Technologies - Overview

  - by Sridhar_R-Oracle

  Oracle Flashback Technologies - IntroductionIn his May 29th 2014 blog, my colleague Joe Meeks introduced Oracle Maximum Availability Architecture (MAA) and discussed both planned and unplanned outages. Let’s take a closer look at unplanned outages. These can be caused by physical failures (e.g., server, storage, network, file deletion, physical corruption, site failures) or by logical failures – cases where all components and files are physically available, but data is incorrect or corrupt. These logical failures are usually caused by human errors or application logic errors. This blog series focuses on these logical errors – what causes them and how to address and recover from them using Oracle Database Flashback. In this introductory blog post, I’ll provide an overview of the Oracle Database Flashback technologies and will discuss the features in detail in future blog posts. Let’s get started. We are all human beings (unless a machine is reading this), and making mistakes is a part of what we do…often what we do best!  We “fat finger”, we spill drinks on keyboards, unplug the wrong cables, etc.  In addition, many of us, in our lives as DBAs or developers, must have observed, caused, or corrected one or more of the following unpleasant events: Accidentally updated a table with wrong values !! Performed a batch update that went wrong - due to logical errors in the code !! Dropped a table !! How do DBAs typically recover from these types of errors? First, data needs to be restored and recovered to the point-in-time when the error occurred (incomplete or point-in-time recovery).  Moreover, depending on the type of fault, it’s possible that some services – or even the entire database – would have to be taken down during the recovery process.Apart from error conditions, there are other questions that need to be addressed as part of the investigation. For example, what did the data look like in the morning, prior to the error? What were the various changes to the row(s) between two timestamps? Who performed the transaction and how can it be reversed?  Oracle Database includes built-in Flashback technologies, with features that address these challenges and questions, and enable you to perform faster, easier, and convenient recovery from logical corruptions. HistoryFlashback Query, the first Flashback Technology, was introduced in Oracle 9i. It provides a simple, powerful and completely non-disruptive mechanism for data verification and recovery from logical errors, and enables users to view the state of data at a previous point in time.Flashback Technologies were further enhanced in Oracle 10g, to provide fast, easy recovery at the database, table, row, and even at a transaction level.Oracle Database 11g introduced an innovative method to manage and query long-term historical data with Flashback Data Archive. The 11g release also introduced Flashback Transaction, which provides an easy, one-step operation to back out a transaction. Oracle Database versions 11.2.0.2 and beyond further enhanced the performance of these features. Note that all the features listed here work without requiring any kind of restore operation.In addition, Flashback features are fully supported with the new multi-tenant capabilities introduced with Oracle Database 12c, Flashback Features Oracle Flashback Database enables point-in-time-recovery of the entire database without requiring a traditional restore and recovery operation. It rewinds the entire database to a specified point in time in the past by undoing all the changes that were made since that time.Oracle Flashback Table enables an entire table or a set of tables to be recovered to a point in time in the past.Oracle Flashback Drop enables accidentally dropped tables and all dependent objects to be restored.Oracle Flashback Query enables data to be viewed at a point-in-time in the past. This feature can be used to view and reconstruct data that was lost due to unintentional change(s) or deletion(s). This feature can also be used to build self-service error correction into applications, empowering end-users to undo and correct their errors.Oracle Flashback Version Query offers the ability to query the historical changes to data between two points in time or system change numbers (SCN) Oracle Flashback Transaction Query enables changes to be examined at the transaction level. This capability can be used to diagnose problems, perform analysis, audit transactions, and even revert the transaction by undoing SQLOracle Flashback Transaction is a procedure used to back-out a transaction and its dependent transactions.Flashback technologies eliminate the need for a traditional restore and recovery process to fix logical corruptions or make enquiries. Using these technologies, you can recover from the error in the same amount of time it took to generate the error. All the Flashback features can be accessed either via SQL command line (or) via Enterprise Manager.  Most of the Flashback technologies depend on the available UNDO to retrieve older data. The following table describes the various Flashback technologies: their purpose, dependencies and situations where each individual technology can be used.   Example Syntax Error investigation related:The purpose is to investigate what went wrong and what the values were at certain points in timeFlashback Queries  ( select .. as of SCN | Timestamp )   - Helps to see the value of a row/set of rows at a point in timeFlashback Version Queries  ( select .. versions between SCN | Timestamp and SCN | Timestamp)  - Helps determine how the value evolved between certain SCNs or between timestamps Flashback Transaction Queries (select .. XID=)   - Helps to understand how the transaction caused the changes.Error correction related:The purpose is to fix the error and correct the problems,Flashback Table  (flashback table .. to SCN | Timestamp)  - To rewind the table to a particular timestamp or SCN to reverse unwanted updates Flashback Drop (flashback table ..  to before drop )  - To undrop or undelete a table Flashback Database (flashback database to SCN  | Restore Point )  - This is the rewind button for Oracle databases. You can revert the entire database to a particular point in time. It is a fast way to perform a PITR (point-in-time recovery). Flashback Transaction (DBMS_FLASHBACK.TRANSACTION_BACKOUT(XID..))  - To reverse a transaction and its related transactions Advanced use cases Flashback technology is integrated into Oracle Recovery Manager (RMAN) and Oracle Data Guard. So, apart from the basic use cases mentioned above, the following use cases are addressed using Oracle Flashback. Block Media recovery by RMAN - to perform block level recovery Snapshot Standby - where the standby is temporarily converted to a read/write environment for testing, backup, or migration purposes Re-instate old primary in a Data Guard environment – this avoids the need to restore an old backup and perform a recovery to make it a new standby. Guaranteed Restore Points - to bring back the entire database to an older point-in-time in a guaranteed way. and so on..I hope this introductory overview helps you understand how Flashback features can be used to investigate and recover from logical errors.  As mentioned earlier, I will take a deeper-dive into to some of the critical Flashback features in my upcoming blogs and address common use cases.

  Read the article

• Rebuilding CoasterBuzz, Part III: The architecture using the "Web stack of love"

  - by Jeff

  This is the third post in a series about rebuilding one of my Web sites, which has been around for 12 years. I hope to relaunch in the next month or two. More: Part I: Evolution, and death to WCF Part II: Hot data objects I finally hit a point in the re-do of CoasterBuzz where I feel like the major pieces are in place... rewritten, ported and what not, so that I can focus now on front-end design and more interesting creative problems. I've been asked on more than one occasion (OK, just twice) what's going on under the covers, so I figure this might be a good time to explain the overall architecture. As it turns out, I'm using a whole lof of the "Web stack of love," as Scott Hanselman likes to refer to it. Oh that Hanselman. First off, at the center of it all, is BizTalk. Just kidding. That's "enterprise architecture" humor, where every discussion starts with how they'll use BizTalk. Here are the bigger moving parts: It's fairly straight forward. A common library lives in a number of Web apps, all of which are (or will be) powered by ASP.NET MVC 4. They all talk to the same database. There is the main Web site, which also has the endpoint for the Silverlight-based Feed app. The cstr.bz site handles redirects, which are generated when news items are published and sent to Twitter. Facebook publishing is handled via the RSS Graffiti Facebook app. The API site handles requests from the Windows Phone app. The main site depends very heavily on POP Forums, the open source, MVC-based forum I maintain. It serves a number of functions, primarily handling users. These user objects serve in non-forum roles to handle things like news and database contributions, maintaining track records (coaster nerd for "list of rides I've been on") and, perhaps most importantly, paid club memberships. Before I get into more specifics, note that the "glue" for everything is Ninject, the dependency injection framework. I actually prefer StructureMap these days, but I started with Ninject in POP Forums a long time ago. POP Forums has a static class, PopForumsActivation, that new's up an instance of the container, and you can call it from where ever. The downside is that the forums require Ninject in your MVC app as the default dependency resolver. At some point, I'll decouple it, but for now it's not in the way. In the general sense, the entire set of apps follow a repository-service-controller-view pattern. Repos just do data access, service classes do business logic, controllers compose and route, views view. The forum also provides Scoring Game functionality. The Scoring Game is a reasonably abstract framework to award users points based on certain actions, and then award achievements when a certain number of point events happen. For example, the forum already awards a point when someone plus-one's a post you made. You can set up an achievement that says, "Give the user an award when they've had 100 posts plus'd." It also does zero-point entries into the ledger, so if you make a post, you could award an achievement based on 100 posts made. Wiring in the scoring game to CoasterBuzz functionality is just a matter of going to the Ninject container and getting an instance of the event publisher, and passing it events. Forum adapters were introduced into POP Forums a few versions ago, and they can intercept the model generated for forum topic lists and threads and designate an alternate view. These are used to make the "Day in Pictures" forum, where users can upload photos as frame-by-frame photo threads. Another adapter adds an association UI, so users can associate specific amusement parks with their trip report posts. The Silverlight-based Feed app talks to a simple JSON endpoint in the main app. This uses an underlying library I wrote ages ago, simply called Feeds, that aggregates event information. You inherit from a base class that creates instances of a publisher interface, and then use that class to send it an event type and any number of data fields. Feeds has two publishers: One is to the database, and that's used for the endpoint that talks to the Silverlight app. The second publisher publishes to Twitter, if the event is of the type "news." The wiring is a little strange, because for the new posts and topics events, I'm actually pulling out the forum repository classes from the Ninject container and replacing them with overridden methods to publish. I should probably be doing this at the service class level, but whatever. It's my mess. cstr.bz doesn't do anything interesting. It looks up the path, and if it has a match, does a 301 redirect to the long URL. The API site just serves up JSON for the Windows Phone app. The Windows Phone app is Silverlight, of course, and there isn't much to it. It does use the control toolkit, but beyond that, it relies on a simple class that creates a Webclient and calls the server for JSON to deserialize. The same class is now used by the Feed app, which used to use WCF. Simple is better. Data access in POP Forums is all straight SQL, because a lot of it was ported from the ASP.NET version. Most CoasterBuzz data access is handled by the Entity Framework, using the code-first model. The context class in this case does a lot of work to make sure that the table and key mapping works, since much of it breaks from the normal conventions of EF. One of the more powerful things you can do with EF, once you understand the little gotchas, is split tables by row into different entities. For example, a roller coaster photo has everything in the same row, including the metadata, the thumbnail bytes and the image itself. Obviously, if you want to get a list of photos to iterate over in a view, you don't want to get the image data. The use of navigation properties makes it easier to get just what you want. The front end includes Razor views in MVC, and jQuery is used for client-side goodness. I'm also using jQuery UI in a few places, for tabs, a dialog box and autocomplete. I'm also, tentatively, using jQuery Mobile. I've already ported most forum views to Mobile, but they need some work as v1.1 isn't finished yet. I'm not sure if I'll ship CoasterBuzz with mobile views or not yet. It's on the radar, but not something in my delivery criteria. That covers all of the big frameworks in play. Next time I hope to talk more about the front-end experience, which to me is where most of the fun is these days. Hoping to launch in the next month or two. Getting tired of looking at the old site!

  Read the article

• Master Data

  - by david.butler(at)oracle.com

  Let's take a deeper look at what we mean when we talk about 'Master' data. In its most general sense, master data is data that exists in more than one operational application. These are the applications that automate business processes. These applications require significant amounts of data to function correctly.  This includes data about the objects that are involved in transactions, as well as the transaction data itself.  For example, when a customer buys a product, the transaction is managed by a sales application.  The objects of the transaction are the Customer and the Product.  The transactional data is the time, place, price, discount, payment methods, etc. used at the point of sale. Many thousands of transactional data attributes are needed within the application. These important data elements are local to the applications and have no bearing on other applications. Harmonization and synchronization across applications is not necessary. The Customer and Product objects of the transaction also have a large number of attributes. Customer for example, includes hierarchies, hierarchical and matrixed relationships, contacts, classifications, preferences, accounts, identifiers, profiles, and addresses galore for 'ship to', 'mail to'; 'service at'; etc. Dozens of attributes exist for individuals, hundreds for organizations, and thousands for products. This data has meaning beyond any particular application. It exists in many applications and drives the vital cross application enterprise business processes. These are the processes that define and differentiate the organization. At every decision point, information about the objects of the process determines the direction of the process flow. This is the nature of the data that exists in more than one application, and this is why we call it 'master data'. Let me elaborate. Parties Oracle has developed a party schema to model all participants in your daily business operations. It models people, organizations, groups, customers, contacts, employees, and suppliers. It models their accounts, locations, classifications, and preferences.  And most importantly, it models the vast array of hierarchical and matrixed relationships that exist between all the participants in your real world operations.  The model logically separates people and organizations from their relationships and accounts.  This separation creates flexibility unmatched in the industry and accounts for the fact that the Oracle schema for Customers, Suppliers, and Accounts is a true superset of the wide variety of commercial and homegrown customer models in existence. Sites Sites are places where business is conducted. They can be addresses, clusters such as retail malls, locations within a cluster, floors within a building, places where meters are located, rooms on floors, etc.  Fully understanding all attributes of a site is key to many business processes. Attributes such as 'noise abatement policy' at a point of delivery, or the size of an oven in a business kitchen drive day-to-day activities such as delivery schedules or food promotions. Typically this kind of data is siloed in departments and scattered across applications and spreadsheets.  This leads to conflicting information and poor operational efficiencies. Oracle's Global Single Schema can hold all site attributes in one place and enables a single version of authoritative site information across the enterprise. Products and Services The Oracle Global Single Schema also includes a number of entities that define the products and services a company creates and offers for sale. Key entities include Items organized into Catalogs and Price Lists. The Catalog structures provide for the ability to capture different views of a product such as engineering, manufacturing, and service which are based on a unified product model. As a result, designers, manufacturing engineers, purchasers and partners can work simultaneously on a common product definition. The Catalog schema allows for unlimited attributes, combines them into meaningful groups, and maps them to catalog categories to track these different types of information. The model also maps an unlimited number of functional structures for each item. For example, multiple Bills of Material (BOMs) can be constructed representing requirements BOM, features BOM, and packaging BOM for an item. The Catalog model also supports hierarchical information about each item and all standard Global Data Synchronization attributes. Business Processes Utilizing Linked Data Entities Each business entity codified into a centralized master data environment significantly improves the efficiency of the automated business processes that use the consolidated data.  When all the key business entities used by an organization's process are so consolidated, the advantages are multiplied.  The primary reason for business process breakdowns (i.e. data errors across application boundaries) is eliminated. All processes are positively impacted and business process automation is itself automated.  I like to use the "Call to Resolution" business process as an example to help illustrate this important point. It involves call center applications, service applications, RMA applications, transportation applications, inventory applications, etc. Customer, Site, Product and Supplier master data must all be correct and consistent across these applications.  What's more, the data relationships between customer and product, and product and suppliers must be right. This is the minimum quality needed to insure the business process flows without error. But that is not the end of the story. Critical master data attributes such as customer loyalty, profitability, credit worthiness, and propensity to buy can optimize the call center point of contact component of the process. Critical product information such as alternative parts or equivalent products can optimize the resolution selected by the process. A comprehensive understanding of the 'service at' location can help insure multiple trips are avoided in the process. Full supplier information on reliability, delivery delays, and potential alternates can prevent supplier exceptions and play a significant role in optimizing the process.  In other words, these master data attributes enable the optimization of the "Call to Resolution" enterprise business process. Master data supports and guides business process flows. Thus the phrase 'Master Data' is indeed appropriate. MDM is the software that houses, manages, and governs the master data that resides in all applications and controls the enterprise business processes. A complete master data solution takes a data model that holds fully attributed master data entities and their inter-relationships. Oracle has this model. Oracle, with its deep understanding of application data is the logical choice for managing all your master data within the enterprise whether or not your organization actually runs any Oracle Applications.

  Read the article

• Answers to Your Common Oracle Database Lifecycle Management Questions

  - by Scott McNeil

  We recently ran a live webcast on Strategies for Managing Oracle Database's Lifecycle. There were tons of questions from our audience that we simply could not get to during the hour long presentation. Below are some of those questions along with their answers. Enjoy! Question: In the webcast the presenter talked about “gold” configuration standards, for those who want to use this technique, could you recommend a best practice to consider or follow? How do I get started? Answer:Gold configuration standardization is a quick and easy way to improve availability through consistency. Start by choosing a reference database and saving the configuration to the Oracle Enterprise Manager repository using the Save Configuration feature. Next create a comparison template using the Oracle provided template as a starting point and modify the ignored properties to eliminate expected differences in your environment. Finally create a comparison specification using the comparison template you created plus your saved gold configuration and schedule it to run on a regular basis. Don’t forget to fill in the email addresses of those you want to notify upon drift detection. Watch the database configuration management demo to learn more. Question: Can Oracle Lifecycle Management Pack for Database help with patching an Oracle Real Application Cluster (RAC) environment? Answer: Yes, Oracle Enterprise Manager supports both parallel and rolling patch application of Oracle Real Application Clusters. The use of rolling patching is recommended as there is no downtime involved. For more details watch this demo. Question: What are some of the things administrators can do to control configuration drift? Why is it important? Answer:Configuration drift is one of the main causes of instability and downtime of applications. Oracle Enterprise Manager makes it easy to manage and control drift using scheduled configuration comparisons combined with comparison templates. Question: Does Oracle Enterprise Manager 12c Release 2 offer an incremental update feature for "gold" images? For instance, if the source binary has a higher PSU level, what is the best approach to update the existing "gold" image in the software library? Do you have to create a new image or can you just update the original one? Answer:Provisioning Profiles (Gold images) can contain the installation files and database configuration templates. Although it is possible to make some changes to the profile after creation (mainly to configuration), it is normally recommended to simply create a new profile after applying a patch to your reference database. Question: The webcast talked about enforcing in-house standards, does Oracle Enterprise Manager 12c offer verification of your databases and systems to those standards? For example, the initial "gold" image has been massively deployed over time, and there may be some changes to it. How can you do regular checks from Enterprise Manager to ensure the in-house standards are being enforced? Answer:There are really two methods to validate conformity to standards. The first method is to use gold standards which you compare other databases to report unwanted differences. This method uses a new comparison template technology which allows users to ignore known differences (i.e. SID, Start time, etc) which results in a report only showing important or non-conformant differences. This method is quick to setup and configure and recommended for those who want to get started validating compliance quickly. The second method leverages the new compliance framework which allows the creation of specific and robust validations. These compliance rules are grouped into standards which can be assigned to databases quickly and easily. Compliance rules allow for targeted and more sophisticated validation beyond the basic equals operation available in the comparison method. The compliance framework can be used to implement just about any internal or industry standard. The compliance results will track current and historic compliance scores at the overall and individual database targets. When the issue is resolved, the score is automatically affected. Compliance framework is the recommended long term solution for validating compliance using Oracle Enterprise Manager 12c. Check out this demo on database compliance to learn more. Question: If you are using the integration between Oracle Enterprise Manager and My Oracle Support in an "offline" mode, how do you know if you have the latest My Oracle Support metadata? Answer:In Oracle Enterprise Manager 12c Release 2, you now only need to download one zip file containing all of the metadata xmls files. There is no indication that the metadata has changed but you could run a checksum on the file and compare it to the previously downloaded version to see if it has changed. Question: What happens if a patch fails while administrators are applying it to a database or system? Answer:A large portion of Oracle Enterprise Manager's patch automation is the pre-requisite checks that happen to ensure the highest level of confidence the patch will successfully apply. It is recommended you test the patch in a non-production environment and save the patch plan as a template once successful so you can create new plans using the saved template. If you are using the recommended ‘out of place’ patching methodology, there is no urgency because the database is still running as the cloned Oracle home is being patched. Users can address the issue and restart the patch procedure at the point it left off. If you are using 'in place' method, you can address the issue and continue where the procedure left off. Question: Can Oracle Enterprise Manager 12c R2 compare configurations between more than one target at the same time? Answer:Oracle Enterprise Manager 12c can compare any number of target configurations at one time. This is the basis of many important use cases including Configuration Drift Management. These comparisons can also be scheduled on a regular basis and emails notification sent should any differences appear. To learn more about configuration search and compare watch this demo. Question: How is data comparison done since changes are taking place in a live production system? Answer:There are many things to keep in mind when using the data comparison feature (as part of the Change Management ability to compare table data). It was primarily intended to be used for maintaining consistency of important but relatively static data. For example, application seed data and application setup configuration. This data does not change often but is critical when testing an application to ensure results are consistent with production. It is not recommended to use data comparison on highly dynamic data like transactional tables or very large tables. Question: Which versions of Oracle Database can be monitored through Oracle Enterprise Manager 12c? Answer:Oracle Database versions: 9.2.0.8, 10.1.0.5, 10.2.0.4, 10.2.0.5, 11.1.0.7, 11.2.0.1, 11.2.0.2, 11.2.0.3. Watch the On-Demand Webcast Stay Connected: Twitter | Facebook | YouTube | Linkedin | NewsletterDownload the Oracle Enterprise Manager Cloud Control12c Mobile app

  Read the article

• Source-control 'wet-work'?

  - by Phil Factor

  When a design or creative work is flawed beyond remedy, it is often best to destroy it and start again. The other day, I lost the code to a long and intricate SQL batch I was working on. I’d thought it was impossible, but it happened. With all the technology around that is designed to prevent this occurring, this sort of accident has become a rare event.  If it weren’t for a deranged laptop, and my distraction, the code wouldn’t have been lost this time.  As always, I sighed, had a soothing cup of tea, and typed it all in again.  The new code I hastily tapped in  was much better: I’d held in my head the essence of how the code should work rather than the details: I now knew for certain  the start point, the end, and how it should be achieved. Instantly the detritus of half-baked thoughts fell away and I was able to write logical code that performed better.  Because I could work so quickly, I was able to hold the details of all the columns and variables in my head, and the dynamics of the flow of data. It was, in fact, easier and quicker to start from scratch rather than tidy up and refactor the existing code with its inevitable fumbling and half-baked ideas. What a shame that technology is now so good that developers rarely experience the cleansing shock of losing one’s code and having to rewrite it from scratch.  If you’ve never accidentally lost  your code, then it is worth doing it deliberately once for the experience. Creative people have, until Technology mistakenly prevented it, torn up their drafts or sketches, threw them in the bin, and started again from scratch.  Leonardo’s obsessive reworking of the Mona Lisa was renowned because it was so unusual:  Most artists have been utterly ruthless in destroying work that didn’t quite make it. Authors are particularly keen on writing afresh, and the results are generally positive. Lawrence of Arabia actually lost the entire 250,000 word manuscript of ‘The Seven Pillars of Wisdom’ by accidentally leaving it on a train at Reading station, before rewriting a much better version.  Now, any writer or artist is seduced by technology into altering or refining their work rather than casting it dramatically in the bin or setting a light to it on a bonfire, and rewriting it from the blank page.  It is easy to pick away at a flawed work, but the real creative process is far more brutal. Once, many years ago whilst running a software house that supplied commercial software to local businesses, I’d been supervising an accounting system for a farming cooperative. No packaged system met their needs, and it was all hand-cut code.  For us, it represented a breakthrough as it was for a government organisation, and success would guarantee more contracts. As you’ve probably guessed, the code got mangled in a disk crash just a week before the deadline for delivery, and the many backups all proved to be entirely corrupted by a faulty tape drive.  There were some fragments left on individual machines, but they were all of different versions.  The developers were in despair.  Strangely, I managed to re-write the bulk of a three-month project in a manic and caffeine-soaked weekend.  Sure, that elegant universally-applicable input-form routine was‘nt quite so elegant, but it didn’t really need to be as we knew what forms it needed to support.  Yes, the code lacked architectural elegance and reusability. By dawn on Monday, the application passed its integration tests. The developers rose to the occasion after I’d collapsed, and tidied up what I’d done, though they were reproachful that some of the style and elegance had gone out of the application. By the delivery date, we were able to install it. It was a smaller, faster application than the beta they’d seen and the user-interface had a new, rather Spartan, appearance that we swore was done to conform to the latest in user-interface guidelines. (we switched to Helvetica font to look more ‘Bauhaus’ ). The client was so delighted that he forgave the new bugs that had crept in. I still have the disk that crashed, up in the attic. In IT, we have had mixed experiences from complete re-writes. Lotus 123 never really recovered from a complete rewrite from assembler into C, Borland made the mistake with Arago and Quattro Pro  and Netscape’s complete rewrite of their Navigator 4 browser was a white-knuckle ride. In all cases, the decision to rewrite was a result of extreme circumstances where no other course of action seemed possible.   The rewrite didn’t come out of the blue. I prefer to remember the rewrite of Minix by young Linus Torvalds, or the rewrite of Bitkeeper by a slightly older Linus.  The rewrite of CP/M didn’t do too badly either, did it? Come to think of it, the guy who decided to rewrite the windowing system of the Xerox Star never regretted the decision. I’ll agree that one should often resist calls for a rewrite. One of the worst habits of the more inexperienced programmer is to denigrate whatever code he or she inherits, and then call loudly for a complete rewrite. They are buoyed up by the mistaken belief that they can do better. This, however, is a different psychological phenomenon, more related to the idea of some motorcyclists that they are operating on infinite lives, or the occasional squaddies that if they charge the machine-guns determinedly enough all will be well. Grim experience brings out the humility in any experienced programmer.  I’m referring to quite different circumstances here. Where a team knows the requirements perfectly, are of one mind on methodology and coding standards, and they already have a solution, then what is wrong with considering  a complete rewrite? Rewrites are so painful in the early stages, until that point where one realises the payoff, that even I quail at the thought. One needs a natural disaster to push one over the edge. The trouble is that source-control systems, and disaster recovery systems, are just too good nowadays.   If I were to lose this draft of this very blog post, I know I’d rewrite it much better. However, if you read this, you’ll know I didn’t have the nerve to delete it and start again.  There was a time that one prayed that unreliable hardware would deliver you from an unmaintainable mess of a codebase, but now technology has made us almost entirely immune to such a merciful act of God. An old friend of mine with long experience in the software industry has long had the idea of the ‘source-control wet-work’,  where one hires a malicious hacker in some wild eastern country to hack into one’s own  source control system to destroy all trace of the source to an application. Alas, backup systems are just too good to make this any more than a pipedream. Somehow, it would be difficult to promote the idea. As an alternative, could one construct a source control system that, on doing all the code-quality metrics, would systematically destroy all trace of source code that failed the quality test? Alas, I can’t see many managers buying into the idea. In reading the full story of the near-loss of Toy Story 2, it set me thinking. It turned out that the lucky restoration of the code wasn’t the happy ending one first imagined it to be, because they eventually came to the conclusion that the plot was fundamentally flawed and it all had to be rewritten anyway.  Was this an early  case of the ‘source-control wet-job’?’ It is very hard nowadays to do a rapid U-turn in a development project because we are far too prone to cling to our existing source-code.

  Read the article

• Thoughts on Build 2013

  - by D'Arcy Lussier

  Originally posted on: http://geekswithblogs.net/dlussier/archive/2013/06/30/153294.aspxAnd so another Build conference has come to an end. Below are my thoughts/perspectives on various aspects of the event. I’ll do a separate blog post on my thoughts of the Build message for developers. The Good Moscone center was a great venue for Build! Easy to get around, easy to get to, and well maintained, it was a very comfortable conference venue. Yeah, the free swag was nice. Build has built up an expectation that attendees will always get something; it’ll be interesting to see how Microsoft maintains this expectation over the next few Build events. I still maintain that free swag should never be the main reason one attends an event, and for me this was definitely just an added bonus. I’m planning on trying to use the Surface as a dedicated 2nd device at work for meetings, I’ll share my experiences over the next few months. The hackathon event was a great idea, although personally I couldn’t justify spending the money on a conference registration just to spend the entire conference coding. Still, the apps that were created were really great and there was a lot of passion and excitement around the hackathon. I wonder if they couldn’t have had the hackathon on the Monday/Tuesday for those that wanted to participate so they didn’t miss any of the actual conference over Wed/Thurs. San Francisco was a great city to host Build. Getting from hotels to the conference center was very easy (well especially for me, I was only 3 blocks away) and the city itself felt very safe. However, if I never have to fly into SFO again I’ll be alright with that! Delays going into and out of SFO and both apparently were due to the airport itself. The Bad Build is one of those oddities on the conference landscape where people will pay to commit to attending an event without knowing anything about the sessions. We got our list of conference sessions when we registered on Tuesday, not before. And even then, we only got titles and not descriptions (those were eventually made available via the conference’s mobile application). I get it…they’re going to make announcements and they don’t want to give anything away through the session titles. But honestly, there wasn’t anything in the session titles that I would have considered a surprise. Breakfasts were brutal. High-carb pastries, donuts, and muffins with fruit and hard boiled eggs does not a conference breakfast make. I can’t believe that the difference between a continental breakfast per person and a hot breakfast buffet would have been a huge impact to a conference fee that was already around $2000. The vendor area was anemic. I don’t know why Microsoft forces the vendors into cookie-cutter booth areas (this year they were all made of plywood material). WPC, TechEd – booth areas there allow the vendors to be creative with their displays. Not so much for Build. Really odd was the lack of Microsoft’s own representation around Bing. In the day 1 keynote Microsoft made a big deal about Bing as an API. Yet there was nobody in the vendor area set up to provide more information or have discussions with about the Bing API. The Ugly Our name badges were NFC enabled. The purpose of this, beyond the vendors being able to scan your info, wasn’t really made clear. An attendee I talked to showed how you could get a reader app on your phone so you can scan other members cards and collect their contact info – which is a kewl idea; business cards are so 1990’s. But I was *shocked* at the amount of information that was on our name badges! Here’s what’s displayed on our name badge: - Name - Company - Twitter Handle I’m ok with that. But here’s what actually gets read: - Name - Company - Address Used for Registration - Phone Number Used for Registration So sharing that info with another attendee, they get way more of my info than just how to find me on Twitter! Microsoft, you need to fix this for the future. If vendors want to collect information on attendees, they should be able to collect an ID from the badge, then get a report with corresponding records afterwards. My personal information should not be so readily available, and without my knowledge! Final Verdict Maybe its my older age, maybe its where I’m at in life with family, maybe its where I’m at in my career, but when I consider whether a conference experience was valuable I get to the core reason I attend: opportunities to learn, opportunities to network, opportunities to engage with Microsoft. Opportunities to Learn:  Sessions I attended were generally OK, with some really stand out ones on Day 2. I would love to see Microsoft adopt the Dojo format for a portion of their sessions. Hands On Labs are dull, lecture style sessions are great for information sharing. But a guided hands-on coding session (Read: Dojo) provides the best of both worlds. Being that all content is publically available online to everyone (Build attendee or not), the value of attending the conference sessions is decreased. The value though is in the discussions that take part in person afterwards, which leads to… Opportunities to Network: I enjoyed getting together with old friends and connecting with Twitter friends in person for the first time. I also had an opportunity to meet total strangers. So from a networking perspective, Build was fantastic! I still think it would have been great to have an area for ad-hoc discussions – where speakers could announce they’d be available for more questions after their sessions, or attendees who wanted to discuss more in depth on a topic with other attendees could arrange space. Some people have no problems being outgoing and making these things happen, but others are not and a structured model is more attractive. Opportunities to Engage with Microsoft: Hit and miss on this one. Outside of the vendor area, unless you cornered or reached out to a speaker, there wasn’t any defined way to connect with blue badges. And as I mentioned above, Microsoft didn’t have full representation in the vendor area (no Bing). All in all, Build was a fun party where I was informed about some new stuff and got some free swag. Was it worth the time away from home and the hit to my PD budget? I’d say Somewhat. Build is a great informational conference, but I wouldn’t call it a learning conference. Considering that TechEd seems to be moving to more of an IT Pro focus, independent developer conferences seem to be the best value for those looking to learn and not just be informed. With the rapid development cycle Microsoft is embracing, we’re already seeing Build happening twice within a 12 month period. If that continues, the value of attending Build in person starts to diminish – especially with so much content available online. If Microsoft wants Build to be a must-attend event in the future, they need to start incorporating aspects of Tech Ed, past PDCs, and other conferences so those that want to leave with more than free swag have something to attract them.

  Read the article

• Thou shalt not put code on a piedestal - Code is a tool, no more, no less

  - by Ralf Westphal

  “Write great code and everything else becomes easier” is what Paul Pagel believes in. That´s his version of an adage by Brian Marick he cites: “treat code as an end, not just a means.” And he concludes: “My post-Agile world is software craftsmanship.” I wonder, if that´s really the way to go. Will “simply” writing great code lead the software industry into the light? He´s alluding to the philosopher Kant who proposed, a human beings should never be treated as a means, but always as an end. But should we transfer this ethical statement into the world of software? I doubt it.   Reason #1: Human beings are categorially different from code. They are autonomous entities who need to find a way of living happily together. To Kant it seemed this goal could only be reached if nobody (ab)used a human being for his/her purposes. Because using a human being, i.e. treating it as a means, would contradict the fundamental autonomy and freedom of human beings. People should hold up a symmetric view of their relationships: Since nobody wants to be (ab)used, nobody should (ab)use anybody else. If you want to be treated decently, with respect, in accordance with your own free will - which means as an end - then do the same to other people. Code is dead, it´s a product, it´s a tool for people to reach their goals. No company spends any money on code other than to save money or earn money in the long run. Code is not a puppy. Enterprises do not commission software development to just feel good in its company. Code is not a buddy. Code is a slave, if you will. A mechanical slave, a non-tangible robot. Code is a tool, is a tool. And if we start to treat it differently, if we elevate its status unduely… I guess that will contort our relationship in a contraproductive way. Please get me right: Just because something is “just a tool”, “just a product” does not mean we should not be careful while designing, building, using it. Right to the contrary. We should be very careful when writing code – but not for the code´s sake! We should be careful because we respect our customers who are fellow human beings who should be treated as an end. If we are careless, neglectful, ignorant when producing code on their behalf, then we´re using them. Being sloppy means you´re caring more for yourself that for your customer. You´re then treating the customer as a means to fulfill some of your own needs. That´s plain unethical behavior.   Reason #2: The focus should always be on your purpose, not on any tool. But if code is treated as an end, then the focus is on the code. That might sound right, because where else should be your focus as a software developer? But, well, I´d say, your focus should be on delivering value to your customer. Because in the end your customer does not care if you write a single line of code. She just wants her problem to be solved. Solving problems is the purpose of any contractor. Code must be treated just as a means, a tool we know how to handle very well. But if we´re really trying to be craftsmen then we should be conscious about exactly that and act ethically. That means we must never be so focused on our tool as to be unable to suggest better solutions to the problems of our customers than code.   I´m all with Paul when he urges us to “Write great code”. Sure, if you need to write code, then by all means do so. Write the best code you can think of – and then try to improve it. Paul has all the best intentions when he signs Brians “treat code as an end” - but as we all know: “The road to hell is paved with best intentions” ;-) Yes, I can imagine a “hell of code focus”. In fact, I don´t need to imagine it, I´m seeing it quite often. Because code hell is whereever two developers stand together and are so immersed in talking about all sorts of coding tricks, design patterns, code smells, technologies, platforms, tools that they lose sight of the big picture. Talking about TDD or SOLID or refactoring is a sign of consciousness – relative to the “cowboy coders” view of the world. But from yet another point of view TDD, SOLID, and refactoring are just cures for ailments within a system. And I fear, if “Writing great code” is the only focus or the main focus of software development, then we as an industry lose the ability to see that. Focus draws a line around something, it defines a horizon for perceptions and thinking. So if we focus on code our horizon ends where “the land of code” ends. I don´t think that should be our professional attitude.   So what about Software Craftsmanship as the next big thing after Agility? I think Software Craftsmanship has an important message for all software developers and beyond. But to make it the successor of the Agility movement seems to miss a point. Agility never claimed to solve all software development problems, I´d say. So to blame it for having missed out on certain aspects of it is wrong. If I had to summarize Agility in one word I´d say “Value”. Agility put value for the customer back in software development. Focus on delivering value early and often – that´s Agility´s mantra. All else follows from that. And I ask you: Is that obsolete? Is delivering value not hip anymore? No, sure not. That´s our very purpose as software developers. So how can Agility become obsolete and need to be replaced? We need to do away with this “either/or”-thinking. It´s either Agility or Lean or Software Craftsmanship or whatnot. Instead we should start integrating concepts and movements. Think “both/and”. Think Agility plus Software Craftsmanship plus Lean plus whatnot. We don´t neet to tear down anything from a piedestal and replace it with a new idol. Instead we should do away with piedestals and arrange whatever is helpful is a circle. Then we can turn to concepts, movements for whatever they are best. After 10 years of Agility we should be able to identify what it was good at – and keep that. Keep Agility around and add whatever Agility was lacking or never concerned with. Add whatever is at the core of Software Craftsmanship. Add whatever is at the core of Lean etc. But don´t call out the age of Post-Agility. Because it better never will end. Because once we start to lose Agility´s core we´re losing focus of the customer.

  Read the article

• Christmas in the Clouds

  - by andrewbrust

  I have been spending the last 2 weeks immersing myself in a number of Windows Azure and SQL Azure technologies.  And in setting up a new business (I’ll speak more about that in the future), I have also become a customer of Microsoft’s BPOS (Business Productivity Online Services).  In short, it has been a fortnight of Microsoft cloud computing. On the Azure side, I’ve looked, of course, at Web Roles and Worker Roles.  But I’ve also looked at Azure Storage’s REST API (including coding to it directly), I’ve looked at Azure Drive and the new VM Role; I’ve looked quite a bit at SQL Azure (including the project “Houston” Silverlight UI) and I’ve looked at SQL Azure labs’ OData service too. I’ve also looked at DataMarket and its integration with both PowerPivot and native Excel.  Then there’s AppFabric Caching, SQL Azure Reporting (what I could learn of it) and the Visual Studio tooling for Azure, including the storage of certificate-based credentials.  And to round it out with some user stuff, on the BPOS side, I’ve been working with Exchange Online, SharePoint Online and LiveMeeting. I have to say I like a lot of what I’ve been seeing.  Azure’s not perfect, and BPOS certainly isn’t either.  But there’s good stuff in all these products, and there’s a lot of value. Azure Goes Deep Most people know that Web and Worker roles put the platform in charge of spinning virtual machines up and down, and keeping them up to date. But you can go way beyond that now.  The still-in-beta VM Role gives you the power to craft the machine (much as does Amazon’s EC2), though it takes away the platform’s self-managing attributes.  It still spins instances up and down, making drive storage non-durable, but Azure Drive gives you the ability to store VHD files as blobs and mount them as virtual hard drives that are readable and writeable.  Whether with Azure Storage or SQL Azure, Azure does data.  And OData is everywhere.  Azure Table Storage supports an OData Interface.  So does SQL Azure and so does DataMarket (the former project “Dallas”).  That means that Azure data repositories aren’t just straightforward to provision and configure…they’re also easy to program against, from just about any programming environment, in a RESTful manner.  And for more .NET-centric implementations, Azure AppFabric caching takes the technology formerly known as “Velocity” and throws it up into the cloud, speeding data access even more. Snapping in Place Once you get the hang of it, this stuff just starts to work in a way that becomes natural to understand.  I wasn’t expecting that, and I was really happy to discover it. In retrospect, I am not surprised, because I think the various Azure teams are the center of gravity for Redmond’s innovation right now.  The products belie this and so do my observations of the product teams’ motivation and high morale.  It is really good to see this; Microsoft needs to lead somewhere, and they need to be seen as the underdog while doing so.  With Azure, both requirements are in place.   BPOS: Bad Acronym, Easy Setup BPOS is about products you already know; Exchange, SharePoint, Live Meeting and Office Communications Server.  As such, it’s hard not to be underwhelmed by BPOS.  Until you realize how easy it makes it to get all that stuff set up.  I would say that from sign-up to productive use took me about 45 minutes…and that included the time necessary to wrestle with my DNS provider, set up Outlook and my SmartPhone up to talk to the Exchange account, create my SharePoint site collection, and configure the Outlook Conferencing add-in to talk to the provisioned Live Meeting account. Never before did I think setting up my own Exchange mail could come anywhere close to the simplicity of setting up an SMTP/POP account, and yet BPOS actually made it faster.   What I want from my Azure Christmas Next Year Not everything about Microsoft’s cloud is good.  I close this post with a list of things I’d like to see addressed: BPOS offerings are still based on the 2007 Wave of Microsoft server technologies.  We need to get to 2010, and fast.  Arguably, the 2010 products should have been released to the off-premises channel before the on-premise sone.  Office 365 can’t come fast enough. Azure’s Internet tooling and domain naming, is scattered and confusing.  Deployed ASP.NET applications go to cloudapp.net; SQL Azure and Azure storage work off windows.net.  The Azure portal and Project Houston are at azure.com.  Then there’s appfabriclabs.com and sqlazurelabs.com.  There is a new Silverlight portal that replaces most, but not all of the HTML ones.  And Project Houston is Silvelright-based too, though separate from the Silverlight portal tooling. Microsoft is the king off tooling.  They should not make me keep an entire OneNote notebook full of portal links, account names, access keys, assemblies and namespaces and do so much CTRL-C/CTRL-V work.  I’d like to see more project templates, have them automatically reference the appropriate assemblies, generate the right using/Imports statements and prime my config files with the right markup.  Then I want a UI that lets me log in with my Live ID and pick the appropriate project, database, namespace and key string to get set up fast. Beta programs, if they’re open, should onboard me quickly.  I know the process is difficult and everyone’s going as fast as they can.  But I don’t know why it’s so difficult or why it takes so long.  Getting developers up to speed on new features quickly helps popularize the platform.  Make this a priority. Make Azure accessible from the simplicity platforms, i.e. ASP.NET Web Pages (Razor) and LightSwitch.  Support .NET 4 now.  Make WebMatrix, IIS Express and SQL Compact work with the Azure development fabric. Have HTML helpers make Azure programming easier.  Have LightSwitch work with SQL Azure and not require SQL Express.  LightSwitch has some promising Azure integration now.  But we need more.  WebMatrix has none and that’s just silly, now that the Extra Small Instance is being introduced. The Windows Azure Platform Training Kit is great.  But I want Microsoft to make it even better and I want them to evangelize it much more aggressively.  There’s a lot of good material on Azure development out there, but it’s scattered in the same way that the platform is.   The Training Kit ties a lot of disparate stuff together nicely.  Make it known. Should Old Acquaintance Be Forgot All in all, diving deep into Azure was a good way to end the year.  Diving deeper into Azure should a great way to spend next year, not just for me, but for Microsoft too.

  Read the article

• The Future of Project Management is Social

  - by Natalia Rachelson

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} A guest post by Kazim Isfahani, Director, Product Marketing, Oracle Rapid Ascent. Breakneck Speed. Lightning Fast. Perhaps even overwhelming. No matter which set of adjectives we use to describe it, social media’s rise into the enterprise mainstream has been unprecedented. Indeed, the big 4 social media powerhouses (Facebook, Google+, LinkedIn, and Twitter), have nearly 2 Billion users between them. You may be asking (as you should really) “That’s all well and good for the consumer, but for me at my company, what’s your point? Beyond the fact that I can check and post updates, that is.” Good question, kind sir. Impact of Social and Collaboration on Project Management I’ll dovetail this discussion to the project management realm, since that’s what I’m writing about. Speed is a big challenge for project-driven organizations. Anything that can help speed up project delivery - be it a new product introduction effort or a geographical expansion project - fast is a good thing. So where does this whole social thing fit particularly since there are already a host of tools to help with traditional project execution? The fact is companies have seen improvements in their productivity by deploying departmental collaboration and other social-oriented solutions. McKinsey’s survey on social tools shows we have reached critical scale: 72% of respondents report that their companies use at least one and over 40% say they are using social networks and blogs. We don’t hear as much about the impact of social media technologies at the project and project manager level, but that does not mean there is none. Consider the new hire. The type of individual entering the workforce and executing on projects is a generation of worker expecting visually appealing, easy to use and easy to understand technology meshing hand-in-hand with business processes. Consider the project manager. The social era has enhanced the role that the project manager must play. Today’s project manager must be a supreme communicator, an influencer, a sympathizer, a negotiator, and still manage to keep all stakeholders in the loop on project progress. Social tools play a significant role in this effort. Now consider the impact to the project team. The way that a project team functions has changed, with newer, social oriented technologies making the process of information dissemination and team communications much more fluid. It’s clear that a shift is occurring where “social” is intersecting with project management. The Rise of Social Project Management We refer to the melding of project management and social networking as Social Project Management. Social Project Management is based upon the philosophy that the project team is one part of an integrated whole, and that valuable and unique abilities exist within the larger organization. For this reason, Social Project Management systems should be integrated into the collaborative platform(s) of an organization, allowing communication to proceed outside the project boundaries. What makes social project management "social" is an implicit awareness where distributed teams build connected links in ways that were previously restricted to teams that were co-located. Just as critical, Social Project Management embraces the vision of seamless online collaboration within a project team, but also provides for, (and enhances) the use of rigorous project management techniques. Social Project Management acknowledges that projects (particularly large projects) are a social activity - people doing work with people, for other people, with commitments to yet other people. The more people (larger projects), the more interpersonal the interactions, and the more social affects the project. The Epitome of Social - Fusion Project Portfolio Management If I take this one level further to discuss Fusion Project Portfolio Management, the notion of Social Project Management is on full display. With Fusion Project Portfolio Management, project team members have a single place for interaction on projects and access to any other resources working within the Fusion ERP applications. This allows team members the opportunity to be informed with greater participation and provide better information. The application’s the visual appeal, and highly graphical nature makes it easy to navigate information. The project activity stream adds to the intuitive user experience. The goal of productivity is pervasive throughout Fusion Project Portfolio Management. Field research conducted with Oracle customers and partners showed that users needed a way to stay in the context of their core transactions and yet easily access social networking tools. This is manifested in the application so when a user executes a business process, they not only have the transactional application at their fingertips, but also have things like e-mail, SMS, text, instant messaging, chat – all providing a number of different ways to interact with people and/or groups of people, both internal and external to the project and enterprise. But in the end, connecting people is relatively easy. The larger issue is finding a way to serve up relevant, system-generated, actionable information, in real time, which will allow for more streamlined execution on key business processes. Fusion Project Portfolio Management’s design concept enables users to create project communities, establish discussion threads, manage event calendars as well as deliver project based work spaces to organize communications within the context of a project – all within a secure business environment. We’d love to hear from you and get your thoughts and ideas about how Social Project Management is impacting your organization. To learn more about Oracle Fusion Project Portfolio Management, please visit this link

  Read the article

• Building an Infrastructure Cloud with Oracle VM for x86 + Enterprise Manager 12c

  - by Richard Rotter

  Cloud Computing? Everyone is talking about Cloud these days. Everyone is explaining how the cloud will help you to bring your service up and running very fast, secure and with little effort. You can find these kinds of presentations at almost every event around the globe. But what is really behind all this stuff? Is it really so simple? And the answer is: Yes it is! With the Oracle SW Stack it is! In this post, I will try to bring this down to earth, demonstrating how easy it could be to build a cloud infrastructure with Oracle's solution for cloud computing.But let me cover some basics first: How fast can you build a cloud?How elastic is your cloud so you can provide new services on demand? How much effort does it take to monitor and operate your Cloud Infrastructure in order to meet your SLAs?How easy is it to chargeback for your services provided? These are the critical success factors of Cloud Computing. And Oracle has an answer to all those questions. By using Oracle VM for X86 in combination with Enterprise Manager 12c you can build and control your cloud environment very fast and easy. What are the fundamental building blocks for your cloud? Oracle Cloud Building Blocks #1 Hardware Surprise, surprise. Even the cloud needs to run somewhere, hence you will need hardware. This HW normally consists of servers, storage and networking. But Oracles goes beyond that. There are Optimized Solutions available for your cloud infrastructure. This is a cookbook to build your HW cloud platform. For example, building your cloud infrastructure with blades and our network infrastructure will reduce complexity in your datacenter (Blades with switch network modules, splitter cables to reduce the amount of cables, TOR (Top Of the Rack) switches which are building the interface to your infrastructure environment. Reducing complexity even in the cabling will help you to manage your environment more efficient and with less risk. Of course, our engineered systems fit into the cloud perfectly too. Although they are considered as a PaaS themselves, having the database SW (for Exadata) and the application development environment (for Exalogic) already deployed on them, in general they are ideal systems to enable you building your own cloud and PaaS infrastructure. #2 Virtualization The next missing link in the cloud setup is virtualization. For me personally, it's one of the most hidden "secret", that oracle can provide you with a complete virtualization stack in terms of a hypervisor on both architectures: X86 and Sparc CPUs. There is Oracle VM for X86 and Oracle VM for Sparc available at no additional  license costs if your are running this virtualization stack on top of Oracle HW (and with Oracle Premier Support for HW). This completes the virtualization portfolio together with Solaris Zones introduced already with Solaris 10 a few years ago. Let me explain how Oracle VM for X86 works: Oracle VM for x86 consists of two main parts: - The Oracle VM Server: Oracle VM Server is installed on bare metal and it is the hypervisor which is able to run virtual machines. It has a very small footprint. The ISO-Image of Oracle VM Server is only 200MB large. It is very small but efficient. You can install a OVM-Server in less than 5 mins by booting the Server with the ISO-Image assigned and providing the necessary configuration parameters (like installing an Linux distribution). After the installation, the OVM-Server is ready to use. That's all. - The Oracle VM-Manager: OVM-Manager is the central management tool where you can control your OVM-Servers. OVM-Manager provides the graphical user interface, which is an Application Development Framework (ADF) application, with a familiar web-browser based interface, to manage Oracle VM Servers, virtual machines, and resources. The Oracle VM Manager has the following capabilities: Create virtual machines Create server pools Power on and off virtual machines Manage networks and storage Import virtual machines, ISO files, and templates Manage high availability of Oracle VM Servers, server pools, and virtual machines Perform live migration of virtual machines I want to highlight one of the goodies which you can use if you are running Oracle VM for X86: Preconfigured, downloadable Virtual Machine Templates form edelivery With these templates, you can download completely preconfigured Virtual Machines in your environment, boot them up, configure them at first time boot and use it. There are templates for almost all Oracle SW and Applications (like Fusion Middleware, Database, Siebel, etc.) available. #3) Cloud Management The management of your cloud infrastructure is key. This is a day-to-day job. Acquiring HW, installing a virtualization layer on top of it is done just at the beginning and if you want to expand your infrastructure. But managing your cloud, keeping it up and running, deploying new services, changing your chargeback model, etc, these are the daily jobs. These jobs must be simple, secure and easy to manage. The Enterprise Manager 12c Cloud provides this functionality from one management cockpit. Enterprise Manager 12c uses Oracle VM Manager to control OVM Serverpools. Once you registered your OVM-Managers in Enterprise Manager, then you are able to setup your cloud infrastructure and manage everything from Enterprise Manager. What you need to do in EM12c is: ">Register your OVM Manager in Enterprise ManagerAfter Registering your OVM Manager, all the functionality of Oracle VM for X86 is also available in Enterprise Manager. Enterprise Manager works as a "Manger" of the Manager. You can register as many OVM-Managers you want and control your complete virtualization environment Create Roles and Users for your Self Service Portal in Enterprise ManagerWith this step you allow users to logon on the Enterprise Manager Self Service Portal. Users can request Virtual Machines in this portal. Setup the Cloud InfrastructureSetup the Quotas for your self service users. How many VMs can they request? How much of your resources ( cpu, memory, storage, network, etc. etc.)? Which SW components (templates, assemblys) can your self service users request? In this step, you basically set up the complete cloud infrastructure. Setup ChargebackOnce your cloud is set up, you need to configure your chargeback mechanism. The Enterprise Manager collects the resources metrics, which are used in a very deep level. Almost all collected Metrics could be used in the chargeback module. You can define chargeback plans based on configurations (charge for the amount of cpu, memory, storage is assigned to a machine, or for a specific OS which is installed) or chargeback on resource consumption (% of cpu used, storage used, etc). Or you can also define a combination of configuration and consumption chargeback plans. The chargeback module is very flexible. Here is a overview of the workflow how to handle infrastructure cloud in EM: Summary As you can see, setting up an Infrastructure Cloud Service with Oracle VM for X86 and Enterprise Manager 12c is really simple. I personally configured a complete cloud environment with three X86 servers and a small JBOD san box in less than 3 hours. There is no magic in it, it is all straightforward. Of course, you have to have some experience with Oracle VM and Enterprise Manager. Experience in setting up Linux environments helps as well. I plan to publish a technical cookbook in the next few weeks. I hope you found this post useful and will see you again here on our blog. Any hints, comments are welcome!

  Read the article

• CodePlex Daily Summary for Monday, June 02, 2014

  CodePlex Daily Summary for Monday, June 02, 2014Popular ReleasesPortable Class Library for SQLite: Portable Class Library for SQLite - 3.8.4.4: This pull request from mattleibow addresses an issue with custom function creation (define functions in C# code and invoke them from SQLite as id they where regular SQL functions). Impact: Xamarin iOSTweetinvi a friendly Twitter C# API: Tweetinvi 0.9.3.x: Timelines- Added all the parameters available from the Timeline Endpoints in Tweetinvi. - This is available for HomeTimeline, UserTimeline, MentionsTimeline // Simple query var tweets = Timeline.GetHomeTimeline(); // Create a parameter for queries with specific parameters var timelineParameter = Timeline.GenerateHomeTimelineRequestParameter(); timelineParameter.ExcludeReplies = true; timelineParameter.TrimUser = true; var tweets = Timeline.GetHomeTimeline(timelineParameter); Tweets- Add mis...Sandcastle Help File Builder: Help File Builder and Tools v2014.5.31.0: General InformationIMPORTANT: On some systems, the content of the ZIP file is blocked and the installer may fail to run. Before extracting it, right click on the ZIP file, select Properties, and click on the Unblock button if it is present in the lower right corner of the General tab in the properties dialog. This release completes removal of the branding transformations and implements the new VS2013 presentation style that utilizes the new lightweight website format. Several breaking cha...Tooltip Web Preview: ToolTip Web Preview: Version 1.0Database Helper: Release 1.0.0.0: First Release of Database HelperCoMaSy: CoMaSy1.0.2: !Contact Management SystemImage View Slider: Image View Slider: This is a .NET component. We create this using VB.NET. Here you can use an Image Viewer with several properties to your application form. We wish somebody to improve freely. Try this out! Author : Steven Renaldo Antony Yustinus Arjuna Purnama Putra Andre Wijaya P Martin Lidau PBK GENAP 2014 - TI UKDWAspose for Apache POI: Missing Features of Apache POI WP - v 1.1: Release contain the Missing Features in Apache POI WP SDK in Comparison with Aspose.Words for dealing with Microsoft Word. What's New ?Following Examples: Insert Picture in Word Document Insert Comments Set Page Borders Mail Merge from XML Data Source Moving the Cursor Feedback and Suggestions Many more examples are yet to come here. Keep visiting us. Raise your queries and suggest more examples via Aspose Forums or via this social coding site.SEToolbox: 01.032.014 Release 1: Added fix when loading game Textures for icons causing 'Unable to read beyond the end of the stream'. Added new Resource Report, that displays all in game resources in a concise report. Added in temp directory cleaner, to keep excess files from building up. Fixed use of colors on the windows, to work better with desktop schemes. Adding base support for multilingual resources. This will allow loading of the Space Engineers resources to show localized names, and display localized date a...ClosedXML - The easy way to OpenXML: ClosedXML 0.71.2: More memory and performance improvements. Fixed an issue with pivot table field order.Vi-AIO SearchBar: Vi – AIO Search Bar: Version 1.0Top Verses ( Ayat Emas ): Binary Top Verses: This one is the bin folder of the component. the .dll component is inside.Traditional Calendar Component: Traditional Calender Converter: Duta Wacana Christian University This file containing Traditional Calendar Component and Demo Aplication that using Traditional Calendar Component. This component made with .NET Framework 4 and the programming language is C# .SQLSetupHelper: 1.0.0.0: First Stable Version of SQL SetupComposite Iconote: Composite Iconote: This is a composite has been made by Microsoft Visual Studio 2013. Requirement: To develop this composite or use this component in your application, your computer must have .NET framework 4.5 or newer.Magick.NET: Magick.NET 6.8.9.101: Magick.NET linked with ImageMagick 6.8.9.1. Breaking changes: - Int/short Set methods of WritablePixelCollection are now unsigned. - The Q16 build no longer uses HDRI, switch to the new Q16-HDRI build if you need HDRI.fnr.exe - Find And Replace Tool: 1.7: Bug fixes Refactored logic for encoding text values to command line to handle common edge cases where find/replace operation works in GUI but not in command line Fix for bug where selection in Encoding drop down was different when generating command line in some cases. It was reported in: https://findandreplace.codeplex.com/workitem/34 Fix for "Backslash inserted before dot in replacement text" reported here: https://findandreplace.codeplex.com/discussions/541024 Fix for finding replacing...VG-Ripper & PG-Ripper: VG-Ripper 2.9.59: changes NEW: Added Support for 'GokoImage.com' links NEW: Added Support for 'ViperII.com' links NEW: Added Support for 'PixxxView.com' links NEW: Added Support for 'ImgRex.com' links NEW: Added Support for 'PixLiv.com' links NEW: Added Support for 'imgsee.me' links NEW: Added Support for 'ImgS.it' linksToolbox for Dynamics CRM 2011/2013: XrmToolBox (v1.2014.5.28): XrmToolbox improvement XrmToolBox updates (v1.2014.5.28)Fix connecting to a connection with custom authentication without saved password Tools improvement New tool!Solution Components Mover (v1.2014.5.22) Transfer solution components from one solution to another one Import/Export NN relationships (v1.2014.3.7) Allows you to import and export many to many relationships Tools updatesAttribute Bulk Updater (v1.2014.5.28) Audit Center (v1.2014.5.28) View Layout Replicator (v1.2014.5.28) Scrip...Microsoft Ajax Minifier: Microsoft Ajax Minifier 5.10: Fix for Issue #20875 - echo switch doesn't work for CSS CSS should honor the SASS source-file comments JS should allow multi-line comment directivesNew Projects[ISEN] Rendu de projet Naughty3Dogs - Pong3D: Pong3D est un jeu qui reprend le principe classique du Pong en le portant dans un environnement 3D à l'aide du langage c# et du moteur Unity3DBootstrap for MVC: Bootstrap for MVC.F. A. Q. - Najczesciej zadawane pytania: FAQForuMvc: Technifutur short projecthomework456: no.iStoody: Studies organize solution, available through app for Windows and Windows Phone.liaoliao: ???????????Price Tracker: Allows a user to track prices based on parsed emailsRoslynEval: RoslynRx Hub: Rx Hub provides server side computation which initiate by subscriber requestSharepoint Online AppCache Reset: We are an IT resource company providing Virtual IT services and custom and opensource programs for everyday needs. UnitConversionLib : Smart Unit Conversion Library in C#: Conversion of units, arithmetic operation and parsing quantities with their units on run time. Smart unit converter and conversion lib for physical quantities,

  Read the article

• Unlocking Productivity

  - by Michael Snow

  Unlocking Productivity in Life Sciences with Consolidated Content Management by Joe Golemba, Vice President, Product Management, Oracle WebCenter As life sciences organizations look to become more operationally efficient, the ability to effectively leverage information is a competitive advantage. Whether data mining at the drug discovery phase or prepping the sales team before a product launch, content management can play a key role in developing, organizing, and disseminating vital information. The goal of content management is relatively straightforward: put the information that people need where they can find it. A number of issues can complicate this; information sits in many different systems, each of those systems has its own security, and the information in those systems exists in many different formats. Identifying and extracting pertinent information from mountains of farflung data is no simple job, but the alternative—wasted effort or even regulatory compliance issues—is worse. An integrated information architecture can enable health sciences organizations to make better decisions, accelerate clinical operations, and be more competitive. Unstructured data matters Often when we think of drug development data, we think of structured data that fits neatly into one or more research databases. But structured data is often directly supported by unstructured data such as experimental protocols, reaction conditions, lot numbers, run times, analyses, and research notes. As life sciences companies seek integrated views of data, they are typically finding diverse islands of data that seemingly have no relationship to other data in the organization. Information like sales reports or call center reports can be locked into siloed systems, and unavailable to the discovery process. Additionally, in the increasingly networked clinical environment, Web pages, instant messages, videos, scientific imaging, sales and marketing data, collaborative workspaces, and predictive modeling data are likely to be present within an organization, and each source potentially possesses information that can help to better inform specific efforts. Historically, content management solutions that had 21CFR Part 11 capabilities—electronic records and signatures—were focused mainly on content-enabling manufacturing-related processes. Today, life sciences companies have many standalone repositories, requiring different skills, service level agreements, and vendor support costs to manage them. With the amount of content doubling every three to six months, companies have recognized the need to manage unstructured content from the beginning, in order to increase employee productivity and operational efficiency. Using scalable and secure enterprise content management (ECM) solutions, organizations can better manage their unstructured content. These solutions can also be integrated with enterprise resource planning (ERP) systems or research systems, making content available immediately, in the context of the application and within the flow of the employee’s typical business activity. Administrative safeguards—such as content de-duplication—can also be applied within ECM systems, so documents are never recreated, eliminating redundant efforts, ensuring one source of truth, and maintaining content standards in the organization. Putting it in context Consolidating structured and unstructured information in a single system can greatly simplify access to relevant information when it is needed through contextual search. Using contextual filters, results can include therapeutic area, position in the value chain, semantic commonalities, technology-specific factors, specific researchers involved, or potential business impact. The use of taxonomies is essential to organizing information and enabling contextual searches. Taxonomy solutions are composed of a hierarchical tree that defines the relationship between different life science terms. When overlaid with additional indexing related to research and/or business processes, it becomes possible to effectively narrow down the amount of data that is returned during searches, as well as prioritize results based on specific criteria and/or prior search history. Thus, search results are more accurate and relevant to an employee’s day-to-day work. For example, a search for the word "tissue" by a lab researcher would return significantly different results than a search for the same word performed by someone in procurement. Of course, diverse data repositories, combined with the immense amounts of data present in an organization, necessitate that the data elements be regularly indexed and cached beforehand to enable reasonable search response times. In its simplest form, indexing of a single, consolidated data warehouse can be expected to be a relatively straightforward effort. However, organizations require the ability to index multiple data repositories, enabling a single search to reference multiple data sources and provide an integrated results listing. Security and compliance Beyond yielding efficiencies and supporting new insight, an enterprise search environment can support important security considerations as well as compliance initiatives. For example, the systems enable organizations to retain the relevance and the security of the indexed systems, so users can only see the results to which they are granted access. This is especially important as life sciences companies are working in an increasingly networked environment and need to provide secure, role-based access to information across multiple partners. Although not officially required by the 21 CFR Part 11 regulation, the U.S. Food and Drug Administraiton has begun to extend the type of content considered when performing relevant audits and discoveries. Having an ECM infrastructure that provides centralized management of all content enterprise-wide—with the ability to consistently apply records and retention policies along with the appropriate controls, validations, audit trails, and electronic signatures—is becoming increasingly critical for life sciences companies. Making the move Creating an enterprise-wide ECM environment requires moving large amounts of content into a single enterprise repository, a daunting and risk-laden initiative. The first key is to focus on data taxonomy, allowing content to be mapped across systems. The second is to take advantage new tools which can dramatically speed and reduce the cost of the data migration process through automation. Additional content need not be frozen while it is migrated, enabling productivity throughout the process. The ability to effectively leverage information into success has been gaining importance in the life sciences industry for years. The rapid adoption of enterprise content management, both in operational processes as well as in scientific management, are clear indicators that the companies are looking to use all available data to be better informed, improve decision making, minimize risk, and increase time to market, to maintain profitability and be more competitive. As more and more varieties and sources of information are brought under the strategic management umbrella, the ability to divine knowledge from the vast pool of information is increasingly difficult. Simple search engines and basic content management are increasingly unable to effectively extract the right information from the mountains of data available. By bringing these tools into context and integrating them with business processes and applications, we can effectively focus on the right decisions that make our organizations more profitable. More Information Oracle will be exhibiting at DIA 2012 in Philadelphia on June 25-27. Stop by our booth Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} (#2825) to learn more about the advantages of a centralized ECM strategy and see the Oracle WebCenter Content solution, our 21 CFR Part 11 compliant content management platform.

  Read the article

• Source-control 'wet-work'?

  - by Phil Factor

  When a design or creative work is flawed beyond remedy, it is often best to destroy it and start again. The other day, I lost the code to a long and intricate SQL batch I was working on. I’d thought it was impossible, but it happened. With all the technology around that is designed to prevent this occurring, this sort of accident has become a rare event.  If it weren’t for a deranged laptop, and my distraction, the code wouldn’t have been lost this time.  As always, I sighed, had a soothing cup of tea, and typed it all in again.  The new code I hastily tapped in  was much better: I’d held in my head the essence of how the code should work rather than the details: I now knew for certain  the start point, the end, and how it should be achieved. Instantly the detritus of half-baked thoughts fell away and I was able to write logical code that performed better.  Because I could work so quickly, I was able to hold the details of all the columns and variables in my head, and the dynamics of the flow of data. It was, in fact, easier and quicker to start from scratch rather than tidy up and refactor the existing code with its inevitable fumbling and half-baked ideas. What a shame that technology is now so good that developers rarely experience the cleansing shock of losing one’s code and having to rewrite it from scratch.  If you’ve never accidentally lost  your code, then it is worth doing it deliberately once for the experience. Creative people have, until Technology mistakenly prevented it, torn up their drafts or sketches, threw them in the bin, and started again from scratch.  Leonardo’s obsessive reworking of the Mona Lisa was renowned because it was so unusual:  Most artists have been utterly ruthless in destroying work that didn’t quite make it. Authors are particularly keen on writing afresh, and the results are generally positive. Lawrence of Arabia actually lost the entire 250,000 word manuscript of ‘The Seven Pillars of Wisdom’ by accidentally leaving it on a train at Reading station, before rewriting a much better version.  Now, any writer or artist is seduced by technology into altering or refining their work rather than casting it dramatically in the bin or setting a light to it on a bonfire, and rewriting it from the blank page.  It is easy to pick away at a flawed work, but the real creative process is far more brutal. Once, many years ago whilst running a software house that supplied commercial software to local businesses, I’d been supervising an accounting system for a farming cooperative. No packaged system met their needs, and it was all hand-cut code.  For us, it represented a breakthrough as it was for a government organisation, and success would guarantee more contracts. As you’ve probably guessed, the code got mangled in a disk crash just a week before the deadline for delivery, and the many backups all proved to be entirely corrupted by a faulty tape drive.  There were some fragments left on individual machines, but they were all of different versions.  The developers were in despair.  Strangely, I managed to re-write the bulk of a three-month project in a manic and caffeine-soaked weekend.  Sure, that elegant universally-applicable input-form routine was‘nt quite so elegant, but it didn’t really need to be as we knew what forms it needed to support.  Yes, the code lacked architectural elegance and reusability. By dawn on Monday, the application passed its integration tests. The developers rose to the occasion after I’d collapsed, and tidied up what I’d done, though they were reproachful that some of the style and elegance had gone out of the application. By the delivery date, we were able to install it. It was a smaller, faster application than the beta they’d seen and the user-interface had a new, rather Spartan, appearance that we swore was done to conform to the latest in user-interface guidelines. (we switched to Helvetica font to look more ‘Bauhaus’ ). The client was so delighted that he forgave the new bugs that had crept in. I still have the disk that crashed, up in the attic. In IT, we have had mixed experiences from complete re-writes. Lotus 123 never really recovered from a complete rewrite from assembler into C, Borland made the mistake with Arago and Quattro Pro  and Netscape’s complete rewrite of their Navigator 4 browser was a white-knuckle ride. In all cases, the decision to rewrite was a result of extreme circumstances where no other course of action seemed possible.   The rewrite didn’t come out of the blue. I prefer to remember the rewrite of Minix by young Linus Torvalds, or the rewrite of Bitkeeper by a slightly older Linus.  The rewrite of CP/M didn’t do too badly either, did it? Come to think of it, the guy who decided to rewrite the windowing system of the Xerox Star never regretted the decision. I’ll agree that one should often resist calls for a rewrite. One of the worst habits of the more inexperienced programmer is to denigrate whatever code he or she inherits, and then call loudly for a complete rewrite. They are buoyed up by the mistaken belief that they can do better. This, however, is a different psychological phenomenon, more related to the idea of some motorcyclists that they are operating on infinite lives, or the occasional squaddies that if they charge the machine-guns determinedly enough all will be well. Grim experience brings out the humility in any experienced programmer.  I’m referring to quite different circumstances here. Where a team knows the requirements perfectly, are of one mind on methodology and coding standards, and they already have a solution, then what is wrong with considering  a complete rewrite? Rewrites are so painful in the early stages, until that point where one realises the payoff, that even I quail at the thought. One needs a natural disaster to push one over the edge. The trouble is that source-control systems, and disaster recovery systems, are just too good nowadays.   If I were to lose this draft of this very blog post, I know I’d rewrite it much better. However, if you read this, you’ll know I didn’t have the nerve to delete it and start again.  There was a time that one prayed that unreliable hardware would deliver you from an unmaintainable mess of a codebase, but now technology has made us almost entirely immune to such a merciful act of God. An old friend of mine with long experience in the software industry has long had the idea of the ‘source-control wet-work’,  where one hires a malicious hacker in some wild eastern country to hack into one’s own  source control system to destroy all trace of the source to an application. Alas, backup systems are just too good to make this any more than a pipedream. Somehow, it would be difficult to promote the idea. As an alternative, could one construct a source control system that, on doing all the code-quality metrics, would systematically destroy all trace of source code that failed the quality test? Alas, I can’t see many managers buying into the idea. In reading the full story of the near-loss of Toy Story 2, it set me thinking. It turned out that the lucky restoration of the code wasn’t the happy ending one first imagined it to be, because they eventually came to the conclusion that the plot was fundamentally flawed and it all had to be rewritten anyway.  Was this an early  case of the ‘source-control wet-job’?’ It is very hard nowadays to do a rapid U-turn in a development project because we are far too prone to cling to our existing source-code.

  Read the article

• Reviewing Retail Predictions for 2011

  - by David Dorf

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} I've been busy thinking about what 2012 and beyond will look like for retail, and I have some interesting predictions to share.  But before I go there, let’s first review this year’s predictions before making new ones for 2012. 1. Alternate Payments We've seen several alternate payment schemes emerge over the last two years, and 2011 may be the year one of them takes hold. Any competition that can drive down fees will be good for everyone. I'm betting that Apple will add NFC chips to their next version of the iPhone, then enable payments in stores using iTunes accounts on the backend. Paypal will continue to make inroads, and Isis will announce a pilot. The iPhone 4S did not contain an NFC chip, so we’ll have to continuing waiting for the iPhone 5. PayPal announced its moving into in-store payments, and Google launched its wallet in selected cities.  Overall I think the payment scene is heating up and that trend will continue. 2. Engineered Systems The industry is moving toward purpose-built appliances that are optimized across the entire stack. Oracle calls these "engineered systems" and the first two examples are Exadata and Exalogic, but there are other examples from other vendors. These are particularly important to the retail industry because of the volume of data that must be processed. There should be continued adoption in 2011. Oracle reports that Exadata is its fasting growing product, and at the recent OpenWorld it announced the SuperCluster and Exalytics products, both continuing the engineered systems trend. SAP’s HANA continues to receive attention, and IBM also seems to be moving in this direction. 3. Social Analytics There are lots of tools that provide insight into how a brand is perceived across popular internet sites, but as far as I know, these tools are not industry specific. The next step needs to mine the data and determine how it should influence retail operations. The data needs to help retailers determine how they create promotions, which products to stock, and how to keep consumers engaged. Social data alone does not provide the answers, but its one more data point that will help retailers make better decisions. Look for some vendor consolidation to help make this happen. In March, Salesforce.com acquired leading social monitoring vendor Radian6 and followed up with acquisitions of Heroku and Model Metrics. The notion of Social CRM seems to be going more mainstream now. 4. 2-D Barcodes Look for more QRCodes on shelf-tags, in newspaper circulars, and on billboards. It's a great portal from the physical world into the digital one that buys us time until augmented reality matures further. Nobody wants to type "www", backslash, and ".com" on their phones. QRCodes are everywhere. ‘Nuff said. 5. In the words of Microsoft, "To the Cloud!" My favorite "cloud application" is Evernote. If you take notes on your work laptop, you will inevitably need those notes on your home PC. And if you manage to solve that problem, you'll need to access them from your mobile phone. Evernote stores your notes in the cloud and provides easy ways to access them. Being able to access a service from anywhere and not having to worry about backups, upgrades, etc. is great. Retailers will start to rely on cloud services, both public and private, in the coming year. There were no shortage of announcements in this area: Amazon’s cloud-based Kindle Fire, Apple’s iCloud, Oracle’s Public Cloud, etc. I saw an interesting presentation showing how BevMo moved their systems to the cloud.  Seems like retailers are starting to consider the cloud for specific uses. 6. F-CommerceTop of Form Move over "E" and "M" so we can introduce "F-Commerce," which should go mainstream in 2011. Already several retailers have created small stores on Facebook, and it won't be long before Facebook becomes a full-fledged channel in the omni-channel world of retail. The battle between Facebook and Google will heat up over retail, where both stand to make lots of money. JCPenney and ASOS both put their entire catalogs on Facebook, and lots of other retailers have connected Facebook to their e-commerce site. I still think selling from the newsfeed is the best approach, and several retailers are trying that approach as well. I just don’t see Google+ as a threat to Facebook, so I think that battle is over.  I called 2011 The Year of F-Commerce, and that was probably accurate. Its good to look back at predictions, but we also have to think about what was missed.  I didn't see Amazon entering the tablet business with such a splash, although in hindsight it was obvious. Nor did I think HP would fall so far so fast.  Look for my 2012 predictions coming soon.

  Read the article

• Book Review: Brownfield Application Development in .NET

  - by DotNetBlues

  I recently finished reading the book Brownfield Application Development in .NET by Kyle Baley and Donald Belcham.  The book is available from Manning.  First off, let me say that I'm a huge fan of Manning as a publisher.  I've found their books to be top-quality, over all.  As a Kindle owner, I also appreciate getting an ebook copy along with the dead tree copy.  I find ebooks to be much more convenient to read, but hard-copies are easier to reference. The book covers, surprisingly enough, working with brownfield applications.  Which is well and good, if that term has meaning to you.  It didn't for me.  Without retreading a chunk of the first chapter, the authors break code bases into three broad categories: greenfield, brownfield, and legacy.  Greenfield is, essentially, new development that hasn't had time to rust and is (hopefully) being approached with some discipline.  Legacy applications are those that are more or less stable and functional, that do not expect to see a lot of work done to them, and are more likely to be replaced than reworked. Brownfield code is the gray (brown?) area between the two and the authors argue, quite effectively, that it is the most likely state for an application to be in.  Brownfield code has, in some way, been allowed to tarnish around the edges and can be difficult to work with.  Although I hadn't realized it, most of the code I've worked on has been brownfield.  Sometimes, there's talk of scrapping and starting over.  Sometimes, the team dismisses increased discipline as ivory tower nonsense.  And, sometimes, I've been the ignorant culprit vexing my future self. The book is broken into two major sections, plus an introduction chapter and an appendix.  The first section covers what the authors refer to as "The Ecosystem" which consists of version control, build and integration, testing, metrics, and defect management.  The second section is on actually writing code for brownfield applications and discusses object-oriented principles, architecture, external dependencies, and, of course, how to deal with these when coming into an existing code base. The ecosystem section is just shy of 140 pages long and brings some real meat to the matter.  The focus on "pain points" immediately sets the tone as problem-solution, rather than academic.  The authors also approach some of the topics from a different angle than some essays I've read on similar topics.  For example, the chapter on automated testing is on just that -- automated testing.  It's all well and good to criticize a project as conflating integration tests with unit tests, but it really doesn't make anyone's life better.  The discussion on testing is more focused on the "right" level of testing for existing projects.  Sometimes, an integration test is the best you can do without gutting a section of functional code.  Even if you can sell other developers and/or management on doing so, it doesn't actually provide benefit to your customers to rewrite code that works.  This isn't to say the authors encourage sloppy coding.  Far from it.  Just that they point out the wisdom of ignoring the sleeping bear until after you deal with the snarling wolf. The other sections take a similarly real-world, workable approach to the pain points they address.  As the section moves from technical solutions like version control and continuous integration (CI) to the softer, process issues of metrics and defect tracking, the authors begin to gently suggest moving toward a zero defect count.  While that really sounds like an unreasonable goal for a lot of ongoing projects, it's quite apparent that the authors have first-hand experience with taming some gruesome projects.  The suggestions are grounded and workable, and the difficulty of some situations is explicitly acknowledged. I have to admit that I started getting bored by the end of the ecosystem section.  No matter how valuable I think a good project manager or business analyst is to a successful ALM, at the end of the day, I'm a gear-head.  Also, while I agreed with a lot of the ecosystem ideas, in theory, I didn't necessarily feel that a lot of the single-developer projects that I'm often involved in really needed that level of rigor.  It's only after reading the sidebars and commentary in the coding section that I had the context for the arguments made in favor of a strong ecosystem supporting the development process.  That isn't to say that I didn't support good product management -- indeed, I've probably pushed too hard, on occasion, for a strong ALM outside of just development.  This book gave me deeper insight into why some corners shouldn't be cut and how damaging certain sins of omission can be. The code section, though, kept me engaged for its entirety.  Many technical books can be used as reference material from day one.  The authors were clear, however, that this book is not one of these.  The first chapter of the section (chapter seven, over all) addresses object oriented (OO) practices.  I've read any number of definitions, discussions, and treatises on OO.  None of the chapter was new to me, but it was a good review, and I'm of the opinion that it's good to review the foundations of what you do, from time to time, so I didn't mind. The remainder of the book is really just about how to apply OOP to existing code -- and, just because all your code exists in classes does not mean that it's object oriented.  That topic has the potential to be extremely condescending, but the authors miraculously managed to never once make me feel like a dolt or that they were wagging their finger at me for my prior sins.  Instead, they continue the "pain points" and problem-solution presentation to give concrete examples of how to apply some pretty academic-sounding ideas.  That's a point worth emphasizing, as my experience with most OO discussions is that they stay in the academic realm.  This book gives some very, very good explanations of why things like the Liskov Substitution Principle exist and why a corporate programmer should even care.  Even if you know, with absolute certainty, that you'll never have to work on an existing code-base, I would recommend this book just for the clarity it provides on OOP. This book goes beyond just theory, or even real-world application.  It presents some methods for fixing problems that any developer can, and probably will, encounter in the wild.  First, the authors address refactoring application layers and internal dependencies.  Then, they take you through those layers from the UI to the data access layer and external dependencies.  Finally, they come full circle to tie it all back to the overall process.  By the time the book is done, you're left with a lot of ideas, but also a reasonable plan to begin to improve an existing project structure. Throughout the book, it's apparent that the authors have their own preferred methodology (TDD and domain-driven design), as well as some preferred tools.  The "Our .NET Toolbox" is something of a neon sign pointing to that latter point.  They do not beat the reader over the head with anything resembling a "One True Way" mentality.  Even for the most emphatic points, the tone is quite congenial and helpful.  With some of the near-theological divides that exist within the tech community, I found this to be one of the more remarkable characteristics of the book.  Although the authors favor tools that might be considered Alt.NET, there is no reason the advice and techniques given couldn't be quite successful in a pure Microsoft shop with Team Foundation Server.  For that matter, even though the book specifically addresses .NET, it could be applied to a Java and Oracle shop, as well.

  Read the article

• Mscorlib mocking minus the attribute

  - by mehfuzh

  Mocking .net framework members (a.k.a. mscorlib) is always a daunting task. It’s the breed of static and final methods and full of surprises. Technically intercepting mscorlib members is completely different from other class libraries. This is the reason it is dealt differently. Generally, I prefer writing a wrapper around an mscorlib member (Ex. File.Delete(“abc.txt”)) and expose it via interface but that is not always an easy task if you already have years old codebase. While mocking mscorlib members first thing that comes to people’s mind is DateTime.Now. If you Google through, you will find tons of example dealing with just that. May be it’s the most important class that we can’t ignore and I will create an example using JustMock Q2 with the same. In Q2 2012, we just get rid of the MockClassAtrribute for mocking mscorlib members. JustMock is already attribute free for mocking class libraries. We radically think that vendor specific attributes only makes your code smelly and therefore decided the same for mscorlib. Now, I want to fake DateTime.Now for the following class: public class NestedDateTime { public DateTime GetDateTime() { return DateTime.Now; } } It is the simplest one that can be. The first thing here is that I tell JustMock “hey we have a DateTime.Now in NestedDateTime class that we want to mock”. To do so, during the test initialization I write this: .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Mock.Replace(() => DateTime.Now).In<NestedDateTime>(x => x.GetDateTime());.csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } I can also define it for all the members in the class, but that’s just a waste of extra watts. Mock.Replace(() => DateTime.Now).In<NestedDateTime>(); Now question, why should I bother doing it? The answer is that I am not using attribute and with this approach, I can mock any framework members not just File, FileInfo or DateTime. Here to note that we already mock beyond the three but when nested around a complex class, JustMock was not intercepting it correctly. Therefore, we decided to get rid of the attribute altogether fixing the issue. Finally, I write my test as usual. [TestMethod] public void ShouldAssertMockingDateTimeFromNestedClass() { var expected = new DateTime(2000, 1, 1); Mock.Arrange(() => DateTime.Now).Returns(expected); Assert.Equal(new NestedDateTime().GetDateTime(), expected); } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } That’s it, we are good. Now let me do the same for a random one, let’s say I want mock a member from DriveInfo: Mock.Replace<DriveInfo[]>(() => DriveInfo.GetDrives()).In<MsCorlibFixture>(x => x.ShouldReturnExpectedDriveWhenMocked()); Moving forward, I write my test: [TestMethod] public void ShouldReturnExpectedDriveWhenMocked() { Mock.Arrange(() => DriveInfo.GetDrives()).MustBeCalled(); DriveInfo.GetDrives(); Mock.Assert(()=> DriveInfo.GetDrives()); } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Here is one convention; you have to replace the mscorlib member before executing the target method that contains it. Here the call to DriveInfo is within the MsCorlibFixture therefore it should be defined during test initialization or before executing the test method. Hope this gives you the idea.

  Read the article

• Why Is Vertical Resolution Monitor Resolution so Often a Multiple of 360?

  - by Jason Fitzpatrick

  Stare at a list of monitor resolutions long enough and you might notice a pattern: many of the vertical resolutions, especially those of gaming or multimedia displays, are multiples of 360 (720, 1080, 1440, etc.) But why exactly is this the case? Is it arbitrary or is there something more at work? Today’s Question & Answer session comes to us courtesy of SuperUser—a subdivision of Stack Exchange, a community-driven grouping of Q&A web sites. The Question SuperUser reader Trojandestroy recently noticed something about his display interface and needs answers: YouTube recently added 1440p functionality, and for the first time I realized that all (most?) vertical resolutions are multiples of 360. Is this just because the smallest common resolution is 480×360, and it’s convenient to use multiples? (Not doubting that multiples are convenient.) And/or was that the first viewable/conveniently sized resolution, so hardware (TVs, monitors, etc) grew with 360 in mind? Taking it further, why not have a square resolution? Or something else unusual? (Assuming it’s usual enough that it’s viewable). Is it merely a pleasing-the-eye situation? So why have the display be a multiple of 360? The Answer SuperUser contributor User26129 offers us not just an answer as to why the numerical pattern exists but a history of screen design in the process: Alright, there are a couple of questions and a lot of factors here. Resolutions are a really interesting field of psychooptics meeting marketing. First of all, why are the vertical resolutions on youtube multiples of 360. This is of course just arbitrary, there is no real reason this is the case. The reason is that resolution here is not the limiting factor for Youtube videos – bandwidth is. Youtube has to re-encode every video that is uploaded a couple of times, and tries to use as little re-encoding formats/bitrates/resolutions as possible to cover all the different use cases. For low-res mobile devices they have 360×240, for higher res mobile there’s 480p, and for the computer crowd there is 360p for 2xISDN/multiuser landlines, 720p for DSL and 1080p for higher speed internet. For a while there were some other codecs than h.264, but these are slowly being phased out with h.264 having essentially ‘won’ the format war and all computers being outfitted with hardware codecs for this. Now, there is some interesting psychooptics going on as well. As I said: resolution isn’t everything. 720p with really strong compression can and will look worse than 240p at a very high bitrate. But on the other side of the spectrum: throwing more bits at a certain resolution doesn’t magically make it better beyond some point. There is an optimum here, which of course depends on both resolution and codec. In general: the optimal bitrate is actually proportional to the resolution. So the next question is: what kind of resolution steps make sense? Apparently, people need about a 2x increase in resolution to really see (and prefer) a marked difference. Anything less than that and many people will simply not bother with the higher bitrates, they’d rather use their bandwidth for other stuff. This has been researched quite a long time ago and is the big reason why we went from 720×576 (415kpix) to 1280×720 (922kpix), and then again from 1280×720 to 1920×1080 (2MP). Stuff in between is not a viable optimization target. And again, 1440P is about 3.7MP, another ~2x increase over HD. You will see a difference there. 4K is the next step after that. Next up is that magical number of 360 vertical pixels. Actually, the magic number is 120 or 128. All resolutions are some kind of multiple of 120 pixels nowadays, back in the day they used to be multiples of 128. This is something that just grew out of LCD panel industry. LCD panels use what are called line drivers, little chips that sit on the sides of your LCD screen that control how bright each subpixel is. Because historically, for reasons I don’t really know for sure, probably memory constraints, these multiple-of-128 or multiple-of-120 resolutions already existed, the industry standard line drivers became drivers with 360 line outputs (1 per subpixel). If you would tear down your 1920×1080 screen, I would be putting money on there being 16 line drivers on the top/bottom and 9 on one of the sides. Oh hey, that’s 16:9. Guess how obvious that resolution choice was back when 16:9 was ‘invented’. Then there’s the issue of aspect ratio. This is really a completely different field of psychology, but it boils down to: historically, people have believed and measured that we have a sort of wide-screen view of the world. Naturally, people believed that the most natural representation of data on a screen would be in a wide-screen view, and this is where the great anamorphic revolution of the ’60s came from when films were shot in ever wider aspect ratios. Since then, this kind of knowledge has been refined and mostly debunked. Yes, we do have a wide-angle view, but the area where we can actually see sharply – the center of our vision – is fairly round. Slightly elliptical and squashed, but not really more than about 4:3 or 3:2. So for detailed viewing, for instance for reading text on a screen, you can utilize most of your detail vision by employing an almost-square screen, a bit like the screens up to the mid-2000s. However, again this is not how marketing took it. Computers in ye olden days were used mostly for productivity and detailed work, but as they commoditized and as the computer as media consumption device evolved, people didn’t necessarily use their computer for work most of the time. They used it to watch media content: movies, television series and photos. And for that kind of viewing, you get the most ‘immersion factor’ if the screen fills as much of your vision (including your peripheral vision) as possible. Which means widescreen. But there’s more marketing still. When detail work was still an important factor, people cared about resolution. As many pixels as possible on the screen. SGI was selling almost-4K CRTs! The most optimal way to get the maximum amount of pixels out of a glass substrate is to cut it as square as possible. 1:1 or 4:3 screens have the most pixels per diagonal inch. But with displays becoming more consumery, inch-size became more important, not amount of pixels. And this is a completely different optimization target. To get the most diagonal inches out of a substrate, you want to make the screen as wide as possible. First we got 16:10, then 16:9 and there have been moderately successful panel manufacturers making 22:9 and 2:1 screens (like Philips). Even though pixel density and absolute resolution went down for a couple of years, inch-sizes went up and that’s what sold. Why buy a 19″ 1280×1024 when you can buy a 21″ 1366×768? Eh… I think that about covers all the major aspects here. There’s more of course; bandwidth limits of HDMI, DVI, DP and of course VGA played a role, and if you go back to the pre-2000s, graphics memory, in-computer bandwdith and simply the limits of commercially available RAMDACs played an important role. But for today’s considerations, this is about all you need to know. Have something to add to the explanation? Sound off in the the comments. Want to read more answers from other tech-savvy Stack Exchange users? Check out the full discussion thread here.     

  Read the article

• elffile: ELF Specific File Identification Utility

  - by user9154181

  Solaris 11 has a new standard user level command, /usr/bin/elffile. elffile is a variant of the file utility that is focused exclusively on linker related files: ELF objects, archives, and runtime linker configuration files. All other files are simply identified as "non-ELF". The primary advantage of elffile over the existing file utility is in the area of archives — elffile examines the archive members and can produce a summary of the contents, or per-member details. The impetus to add elffile to Solaris came from the effort to extend the format of Solaris archives so that they could grow beyond their previous 32-bit file limits. That work introduced a new archive symbol table format. Now that there was more than one possible format, I thought it would be useful if the file utility could identify which format a given archive is using, leading me to extend the file utility: % cc -c ~/hello.c % ar r foo.a hello.o % file foo.a foo.a: current ar archive, 32-bit symbol table % ar r -S foo.a hello.o % file foo.a foo.a: current ar archive, 64-bit symbol table In turn, this caused me to think about all the things that I would like the file utility to be able to tell me about an archive. In particular, I'd like to be able to know what's inside without having to unpack it. The end result of that train of thought was elffile. Much of the discussion in this article is adapted from the PSARC case I filed for elffile in December 2010: PSARC 2010/432 elffile Why file Is No Good For Archives And Yet Should Not Be Fixed The standard /usr/bin/file utility is not very useful when applied to archives. When identifying an archive, a user typically wants to know 2 things: Is this an archive? Presupposing that the archive contains objects, which is by far the most common use for archives, what platform are the objects for? Are they for sparc or x86? 32 or 64-bit? Some confusing combination from varying platforms? The file utility provides a quick answer to question (1), as it identifies all archives as "current ar archive". It does nothing to answer the more interesting question (2). To answer that question, requires a multi-step process: Extract all archive members Use the file utility on the extracted files, examine the output for each file in turn, and compare the results to generate a suitable summary description. Remove the extracted files It should be easier and more efficient to answer such an obvious question. It would be reasonable to extend the file utility to examine archive contents in place and produce a description. However, there are several reasons why I decided not to do so: The correct design for this feature within the file utility would have file examine each archive member in turn, applying its full abilities to each member. This would be elegant, but also represents a rather dramatic redesign and re-implementation of file. Archives nearly always contain nothing but ELF objects for a single platform, so such generality in the file utility would be of little practical benefit. It is best to avoid adding new options to standard utilities for which other implementations of interest exist. In the case of the file utility, one concern is that we might add an option which later appears in the GNU version of file with a different and incompatible meaning. Indeed, there have been discussions about replacing the Solaris file with the GNU version in the past. This may or may not be desirable, and may or may not ever happen. Either way, I don't want to preclude it. Examining archive members is an O(n) operation, and can be relatively slow with large archives. The file utility is supposed to be a very fast operation. I decided that extending file in this way is overkill, and that an investment in the file utility for better archive support would not be worth the cost. A solution that is more narrowly focused on ELF and other linker related files is really all that we need. The necessary code for doing this already exists within libelf. All that is missing is a small user-level wrapper to make that functionality available at the command line. In that vein, I considered adding an option for this to the elfdump utility. I examined elfdump carefully, and even wrote a prototype implementation. The added code is small and simple, but the conceptual fit with the rest of elfdump is poor. The result complicates elfdump syntax and documentation, definite signs that this functionality does not belong there. And so, I added this functionality as a new user level command. The elffile Command The syntax for this new command is elffile [-s basic | detail | summary] filename... Please see the elffile(1) manpage for additional details. To demonstrate how output from elffile looks, I will use the following files: FileDescription configA runtime linker configuration file produced with crle dwarf.oAn ELF object /etc/passwdA text file mixed.aArchive containing a mixture of ELF and non-ELF members mixed_elf.aArchive containing ELF objects for different machines not_elf.aArchive containing no ELF objects same_elf.aArchive containing a collection of ELF objects for the same machine. This is the most common type of archive. The file utility identifies these files as follows: % file config dwarf.o /etc/passwd mixed.a mixed_elf.a not_elf.a same_elf.a config: Runtime Linking Configuration 64-bit MSB SPARCV9 dwarf.o: ELF 64-bit LSB relocatable AMD64 Version 1 /etc/passwd: ascii text mixed.a: current ar archive, 32-bit symbol table mixed_elf.a: current ar archive, 32-bit symbol table not_elf.a: current ar archive same_elf.a: current ar archive, 32-bit symbol table By default, elffile uses its "summary" output style. This output differs from the output from the file utility in 2 significant ways: Files that are not an ELF object, archive, or runtime linker configuration file are identified as "non-ELF", whereas the file utility attempts further identification for such files. When applied to an archive, the elffile output includes a description of the archive's contents, without requiring member extraction or other additional steps. Applying elffile to the above files: % elffile config dwarf.o /etc/passwd mixed.a mixed_elf.a not_elf.a same_elf.a config: Runtime Linking Configuration 64-bit MSB SPARCV9 dwarf.o: ELF 64-bit LSB relocatable AMD64 Version 1 /etc/passwd: non-ELF mixed.a: current ar archive, 32-bit symbol table, mixed ELF and non-ELF content mixed_elf.a: current ar archive, 32-bit symbol table, mixed ELF content not_elf.a: current ar archive, non-ELF content same_elf.a: current ar archive, 32-bit symbol table, ELF 64-bit LSB relocatable AMD64 Version 1 The output for same_elf.a is of particular interest: The vast majority of archives contain only ELF objects for a single platform, and in this case, the default output from elffile answers both of the questions about archives posed at the beginning of this discussion, in a single efficient step. This makes elffile considerably more useful than file, within the realm of linker-related files. elffile can produce output in two other styles, "basic", and "detail". The basic style produces output that is the same as that from 'file', for linker-related files. The detail style produces per-member identification of archive contents. This can be useful when the archive contents are not homogeneous ELF object, and more information is desired than the summary output provides: % elffile -s detail mixed.a mixed.a: current ar archive, 32-bit symbol table mixed.a(dwarf.o): ELF 32-bit LSB relocatable 80386 Version 1 mixed.a(main.c): non-ELF content mixed.a(main.o): ELF 64-bit LSB relocatable AMD64 Version 1 [SSE]

  Read the article

• Disaster, or Migration?

  - by Rob Farley

  This post is in two parts – technical and personal. And I should point out that it’s prompted in part by this month’s T-SQL Tuesday, hosted by Allen Kinsel. First, the technical: I’ve had a few conversations with people recently about migration – moving a SQL Server database from one box to another (sometimes, but not primarily, involving an upgrade). One question that tends to come up is that of downtime. Obviously there will be some period of time between the old server being available and the new one. The way that most people seem to think of migration is this: Build a new server. Stop people from using the old server. Take a backup of the old server Restore it on the new server. Reconfigure the client applications (or alternatively, configure the new server to use the same address as the old) Make the new server online. There are other things involved, such as testing, of course. But this is essentially the process that people tell me they’re planning to follow. The bit that I want to look at today (as you’ve probably guessed from my title) is the “backup and restore” section. If a SQL database is using the Simple Recovery Model, then the only restore option is the last database backup. This backup could be full or differential. The transaction log never gets backed up in the Simple Recovery Model. Instead, it truncates regularly to stay small. One that’s using the Full Recovery Model (or Bulk-Logged) won’t truncate its log – the log must be backed up regularly. This provides the benefit of having a lot more option available for restores. It’s a requirement for most systems of High Availability, because if you’re making sure that a spare box is up-and-running, ready to take over, then you have to be interested in the logs that are happening on the current box, rather than truncating them all the time. A High Availability system such as Mirroring, Replication or Log Shipping will initialise the spare machine by restoring a full database backup (and maybe a differential backup if available), and then any subsequent log backups. Once the secondary copy is close, transactions can be applied to keep the two in sync. The main aspect of any High Availability system is to have a redundant system that is ready to take over. So the similarity for migration should be obvious. If you need to move a database from one box to another, then introducing a High Availability mechanism can help. By turning on the Full Recovery Model and then taking a backup (so that the now-interesting logs have some context), logs start being kept, and are therefore available for getting the new box ready (even if it’s an upgraded version). When the migration is ready to occur, a failover can be done, letting the new server take over the responsibility of the old, just as if a disaster had happened. Except that this is a planned failover, not a disaster at all. There’s a fine line between a disaster and a migration. Failovers can be useful in patching, upgrading, maintenance, and more. Hopefully, even an unexpected disaster can be seen as just another failover, and there can be an opportunity there – perhaps to get some work done on the principal server to increase robustness. And if I’ve just set up a High Availability system for even the simplest of databases, it’s not necessarily a bad thing. :) So now the personal: It’s been an interesting time recently... June has been somewhat odd. A court case with which I was involved got resolved (through mediation). I can’t go into details, but my lawyers tell me that I’m allowed to say how I feel about it. The answer is ‘lousy’. I don’t regret pursuing it as long as I did – but in the end I had to make a decision regarding the commerciality of letting it continue, and I’m going to look forward to the days when the kind of money I spent on my lawyers is small change. Mind you, if I had a similar situation with an employer, I’d do the same again, but that doesn’t really stop me feeling frustrated about it. The following day I had to fly to country Victoria to see my grandmother, who wasn’t expected to last the weekend. She’s still around a week later as I write this, but her 92-year-old body has basically given up on her. She’s been a Christian all her life, and is looking forward to eternity. We’ll all miss her though, and it’s hard to see my family grieving. Then on Tuesday, I was driving back to the airport with my family to come home, when something really bizarre happened. We were travelling down the freeway, just pulled out to go past a truck (farm-truck sized, not a semi-trailer), when a car-sized mass of metal fell off it. It was something like an industrial air-conditioner, but from where I was sitting, it was just a mass of spinning metal, like something out of a movie (one friend described it as “holidays by Michael Bay”). Somehow, and I’m really don’t know how, the part of it nearest us bounced high enough to clear the car, and there wasn’t even a scratch. We pulled over the check, and I was just thanking God that we’d changed lanes when we had, and that we remained unharmed. I had all kinds of thoughts about what could’ve happened if we’d had something that size land on the windscreen... All this has drilled home that while I feel that I haven’t provided as well for the family as I could’ve done (like by pursuing an expensive legal case), I shouldn’t even consider that I have proper control over things. I get to live life, and make decisions based on what I feel is right at the time. But I’m not going to get everything right, and there will be things that feel like disasters, some which could’ve been in my control and some which are very much beyond my control. The case feels like something I could’ve pursued differently, a disaster that could’ve been avoided in some way. Gran dying is lousy of course. An accident on the freeway would have been awful. I need to recognise that the worst disasters are ones that I can’t affect, and that I need to look at things in context – perhaps seeing everything that happens as a migration instead. Life is never the same from one day to the next. Every event has a before and an after – sometimes it’s clearly positive, sometimes it’s not. I remember good events in my life (such as my wedding), and bad (such as the loss of my father when I was ten, or the back injury I had eight years ago). I’m not suggesting that I know how to view everything from the “God works all things for good” perspective, but I am trying to look at last week as a migration of sorts. Those things are behind me now, and the future is in God’s hands. Hopefully I’ve learned things, and will be able to live accordingly. I’ve come through this time now, and even though I’ll miss Gran, I’ll see her again one day, and the future is bright.

  Read the article

• Scheduling thread tiles with C++ AMP

  - by Daniel Moth

  This post assumes you are totally comfortable with, what some of us call, the simple model of C++ AMP, i.e. you could write your own matrix multiplication. We are now ready to explore the tiled model, which builds on top of the non-tiled one. Tiling the extent We know that when we pass a grid (which is just an extent under the covers) to the parallel_for_each call, it determines the number of threads to schedule and their index values (including dimensionality). For the single-, two-, and three- dimensional cases you can go a step further and subdivide the threads into what we call tiles of threads (others may call them thread groups). So here is a single-dimensional example: extent<1> e(20); // 20 units in a single dimension with indices from 0-19 grid<1> g(e);      // same as extent tiled_grid<4> tg = g.tile<4>(); …on the 3rd line we subdivided the single-dimensional space into 5 single-dimensional tiles each having 4 elements, and we captured that result in a concurrency::tiled_grid (a new class in amp.h). Let's move on swiftly to another example, in pictures, this time 2-dimensional: So we start on the left with a grid of a 2-dimensional extent which has 8*6=48 threads. We then have two different examples of tiling. In the first case, in the middle, we subdivide the 48 threads into tiles where each has 4*3=12 threads, hence we have 2*2=4 tiles. In the second example, on the right, we subdivide the original input into tiles where each has 2*2=4 threads, hence we have 4*3=12 tiles. Notice how you can play with the tile size and achieve different number of tiles. The numbers you pick must be such that the original total number of threads (in our example 48), remains the same, and every tile must have the same size. Of course, you still have no clue why you would do that, but stick with me. First, we should see how we can use this tiled_grid, since the parallel_for_each function that we know expects a grid. Tiled parallel_for_each and tiled_index It turns out that we have additional overloads of parallel_for_each that accept a tiled_grid instead of a grid. However, those overloads, also expect that the lambda you pass in accepts a concurrency::tiled_index (new in amp.h), not an index<N>. So how is a tiled_index different to an index? A tiled_index object, can have only 1 or 2 or 3 dimensions (matching exactly the tiled_grid), and consists of 4 index objects that are accessible via properties: global, local, tile_origin, and tile. The global index is the same as the index we know and love: the global thread ID. The local index is the local thread ID within the tile. The tile_origin index returns the global index of the thread that is at position 0,0 of this tile, and the tile index is the position of the tile in relation to the overall grid. Confused? Here is an example accompanied by a picture that hopefully clarifies things: array_view<int, 2> data(8, 6, p_my_data); parallel_for_each(data.grid.tile<2,2>(), [=] (tiled_index<2,2> t_idx) restrict(direct3d) { /* todo */ }); Given the code above and the picture on the right, what are the values of each of the 4 index objects that the t_idx variables exposes, when the lambda is executed by T (highlighted in the picture on the right)? If you can't work it out yourselves, the solution follows: t_idx.global       = index<2> (6,3) t_idx.local          = index<2> (0,1) t_idx.tile_origin = index<2> (6,2) t_idx.tile             = index<2> (3,1) Don't move on until you are comfortable with this… the picture really helps, so use it. Tiled Matrix Multiplication Example – part 1 Let's paste here the C++ AMP matrix multiplication example, bolding the lines we are going to change (can you guess what the changes will be?) 01: void MatrixMultiplyTiled_Part1(vector<float>& vC, const vector<float>& vA, const vector<float>& vB, int M, int N, int W) 02: { 03: 04: array_view<const float,2> a(M, W, vA); 05: array_view<const float,2> b(W, N, vB); 06: array_view<writeonly<float>,2> c(M, N, vC); 07: parallel_for_each(c.grid, 08: [=](index<2> idx) restrict(direct3d) { 09: 10: int row = idx[0]; int col = idx[1]; 11: float sum = 0.0f; 12: for(int i = 0; i < W; i++) 13: sum += a(row, i) * b(i, col); 14: c[idx] = sum; 15: }); 16: } To turn this into a tiled example, first we need to decide our tile size. Let's say we want each tile to be 16*16 (which assumes that we'll have at least 256 threads to process, and that c.grid.extent.size() is divisible by 256, and moreover that c.grid.extent[0] and c.grid.extent[1] are divisible by 16). So we insert at line 03 the tile size (which must be a compile time constant). 03: static const int TS = 16; ...then we need to tile the grid to have tiles where each one has 16*16 threads, so we change line 07 to be as follows 07: parallel_for_each(c.grid.tile<TS,TS>(), ...that means that our index now has to be a tiled_index with the same characteristics as the tiled_grid, so we change line 08 08: [=](tiled_index<TS, TS> t_idx) restrict(direct3d) { ...which means, without changing our core algorithm, we need to be using the global index that the tiled_index gives us access to, so we insert line 09 as follows 09: index<2> idx = t_idx.global; ...and now this code just works and it is tiled! Closing thoughts on part 1 The process we followed just shows the mechanical transformation that can take place from the simple model to the tiled model (think of this as step 1). In fact, when we wrote the matrix multiplication example originally, the compiler was doing this mechanical transformation under the covers for us (and it has additional smarts to deal with the cases where the total number of threads scheduled cannot be divisible by the tile size). The point is that the thread scheduling is always tiled, even when you use the non-tiled model. But with this mechanical transformation, we haven't gained anything… Hint: our goal with explicitly using the tiled model is to gain even more performance. In the next post, we'll evolve this further (beyond what the compiler can automatically do for us, in this first release), so you can see the full usage of the tiled model and its benefits… Comments about this post by Daniel Moth welcome at the original blog.

  Read the article

• Partner Blog Series: PwC Perspectives Part 2 - Jumpstarting your IAM program with R2

  - by Tanu Sood

  Identity and access management (IAM) isn’t a new concept. Over the past decade, companies have begun to address identity management through a variety of solutions that have primarily focused on provisioning. . The new age workforce is converging at a rapid pace with ever increasing demand to use diverse portfolio of applications and systems to interact and interface with their peers in the industry and customers alike. Oracle has taken a significant leap with their release of Identity and Access Management 11gR2 towards enabling this global workforce to conduct their business in a secure, efficient and effective manner. As companies deal with IAM business drivers, it becomes immediately apparent that holistic, rather than piecemeal, approaches better address their needs. When planning an enterprise-wide IAM solution, the first step is to create a common framework that serves as the foundation on which to build the cost, compliance and business process efficiencies. As a leading industry practice, IAM should be established on a foundation of accurate data for identity management, making this data available in a uniform manner to downstream applications and processes. Mature organizations are looking beyond IAM’s basic benefits to harness more advanced capabilities in user lifecycle management. For any organization looking to embark on an IAM initiative, consider the following use cases in managing and administering user access. Expanding the Enterprise Provisioning Footprint Almost all organizations have some helpdesk resources tied up in handling access requests from users, a distraction from their core job of handling problem tickets. This dependency has mushroomed from the traditional acceptance of provisioning solutions integrating and addressing only a portion of applications in the heterogeneous landscape Oracle Identity Manager (OIM) 11gR2 solves this problem by offering integration with third party ticketing systems as “disconnected applications”. It allows for the existing business processes to be seamlessly integrated into the system and tracked throughout its lifecycle. With minimal effort and analysis, an organization can begin integrating OIM with groups or applications that are involved with manually intensive access provisioning and de-provisioning activities. This aspect of OIM allows organizations to on-board applications and associated business processes quickly using out of box templates and frameworks. This is especially important for organizations looking to fold in users and resources from mergers and acquisitions. Simplifying Access Requests Organizations looking to implement access request solutions often find it challenging to get their users to accept and adopt the new processes.. So, how do we improve the user experience, make it intuitive and personalized and yet simplify the user access process? With R2, OIM helps organizations alleviate the challenge by placing the most used functionality front and centre in the new user request interface. Roles, application accounts, and entitlements can all be found in the same interface as catalog items, giving business users a single location to go to whenever they need to initiate, approve or track a request. Furthermore, if a particular item is not relevant to a user’s job function or area inside the organization, it can be hidden so as to not overwhelm or confuse the user with superfluous options. The ability to customize the user interface to suit your needs helps in exercising the business rules effectively and avoiding access proliferation within the organization. Saving Time with Templates A typical use case that is most beneficial to business users is flexibility to place, edit, and withdraw requests based on changing circumstances and business needs. With OIM R2, multiple catalog items can now be added and removed from the shopping cart, an ecommerce paradigm that many users are already familiar with. This feature can be especially useful when setting up a large number of new employees or granting existing department or group access to a newly integrated application. Additionally, users can create their own shopping cart templates in order to complete subsequent requests more quickly. This feature saves the user from having to search for and select items all over again if a request is similar to a previous one. Advanced Delegated Administration A key feature of any provisioning solution should be to empower each business unit in managing their own access requests. By bringing administration closer to the user, you improve user productivity, enable efficiency and alleviate the administration overhead. To do so requires a federated services model so that the business units capable of shouldering the onus of user life cycle management of their business users can be enabled to do so. OIM 11gR2 offers advanced administrative options for creating, managing and controlling business logic and workflows through easy to use administrative interface and tools that can be exposed to delegated business administrators. For example, these business administrators can establish or modify how certain requests and operations should be handled within their business unit based on a number of attributes ranging from the type of request or the risk level of the individual items requested. Closed-Loop Remediation Security continues to be a major concern for most organizations. Identity management solutions bolster security by ensuring only the right users have the right access to the right resources. To prevent unauthorized access and where it already exists, the ability to detect and remediate it, are key requirements of an enterprise-grade proven solution. But the challenge with most solutions today is that some of this information still exists in silos. And when changes are made to systems directly, not all information is captured. With R2, oracle is offering a comprehensive Identity Governance solution that our customer organizations are leveraging for closed loop remediation that allows for an automated way for administrators to revoke unauthorized access. The change is automatically captured and the action noted for continued management. Conclusion While implementing provisioning solutions, it is important to keep the near term and the long term goals in mind. The provisioning solution should always be a part of a larger security and identity management program but with the ability to seamlessly integrate not only with the company’s infrastructure but also have the ability to leverage the information, business models compiled and used by the other identity management solutions. This allows organizations to reduce the cost of ownership, close security gaps and leverage the existing infrastructure. And having done so a multiple clients’ sites, this is the approach we recommend. In our next post, we will take a journey through our experiences of advising clients looking to upgrade to R2 from a previous version or migrating from a different solution. Meet the Writers:   Praveen Krishna is a Manager in the Advisory Security practice within PwC.  Over the last decade Praveen has helped clients plan, architect and implement Oracle identity solutions across diverse industries.  His experience includes delivering security across diverse topics like network, infrastructure, application and data where he brings a holistic point of view to problem solving. Dharma Padala is a Director in the Advisory Security practice within PwC.  He has been implementing medium to large scale Identity Management solutions across multiple industries including utility, health care, entertainment, retail and financial sectors.   Dharma has 14 years of experience in delivering IT solutions out of which he has been implementing Identity Management solutions for the past 8 years. Scott MacDonald is a Director in the Advisory Security practice within PwC.  He has consulted for several clients across multiple industries including financial services, health care, automotive and retail.   Scott has 10 years of experience in delivering Identity Management solutions. John Misczak is a member of the Advisory Security practice within PwC.  He has experience implementing multiple Identity and Access Management solutions, specializing in Oracle Identity Manager and Business Process Engineering Language (BPEL). Jenny (Xiao) Zhang is a member of the Advisory Security practice within PwC.  She has consulted across multiple industries including financial services, entertainment and retail. Jenny has three years of experience in delivering IT solutions out of which she has been implementing Identity Management solutions for the past one and a half years.

  Read the article

• D2K to OA Framework Transition

  - by PRajkumar

  What is the difference between D2K form and OA Framework? It is a very innocent but important question for someone that desires to make transition from D2K to OA Framework. I hope you have already read and implemented OA Framework Getting Started. I will re-visit my own experience of implementing HelloWorld program in "OA Framework". When I implemented HelloWorld a year ago, I had no clue as to what I was doing & why I was doing those steps. I merely copied the steps from Oracle Tutorial without understanding them. Hence in this blog, I will try to explain in simple manner the meaning of OA Framework HelloWorld Program and compare the steps to D2K form [where possible]. To keep things simple, only basics will be discussed. Following key Steps were needed for HelloWorld Step 1 Create a new Workspace and a new Project as dictated by Oracle's tutorial. When defining project, you will specify a default package, which in this case was oracle.apps.ak.hello This means the following: - ak is the short name of the Application in Oracle           [means fnd_applications.short_name] hello is the name of your project Step 2 Next, you will create a OA Page within hello project Think OA Page as the fmx file itself in D2K. I am saying so because this page gets attached to the form function. This page will be created within hello project, hence the package name oracle.apps.ak.hello.webui Note the webui, it is a convention to have page in webui, means this page represents the Web User Interface You will assign the default AM [OAApplicationModule]. Think of AM "Connection Manager" and "Transaction State Manager" for your page          I can't co-relate this to anything in D2k, as there is no concept of Connection Pooling and that D2k is not stateless. Reason being that as soon as you kick off a D2K Form, it connects to a single session of Oracle and sticks to that single Oracle database session. So is not the case in OAF, hence AM is needed. Step 3 You create Region within the Page. ·         Region is what will store your fields. Text input fields will be of type messageTextInput. Think of Canvas in D2K. You can have nested regions. Stacked Canvas in D2K comes the closest to this component of OA Framework Step 4 Add a button to one of the nested regions The itemStyle should be submitButton, in case you want the page to be submitted when this button is clicked There is no WHEN-BUTTON-PRESSED trigger in OAF. In Framework, you will add a controller java code to handle events like Form Submit button clicks. JDeveloper generates the default code for you. Primarily two functions [should I call methods] will be created processRequest [for UI Rendering Handling] and processFormRequest          Think of processRequest as WHEN-NEW-FORM-INSTANCE, though processRequest is very restrictive. Note What is the difference between processRequest and processFormRequest? These two methods are available in the Default Controller class that gets created. processFormRequest This method is commonly used to react/respond to the event that has taken place, for example click of a button. Some examples are if(oapagecontext.getParameter("Cancel") != null) (Do your processing for Cancellation/ Rollback) if(oapagecontext.getParameter("Submit") != null) (Do your validations and commit here) if(oapagecontext.getParameter("Update") != null) (Do your validations and commit here) In the above three examples, you could be calling oapagecontext.forwardImmediately to re-direct the page navigation to some other page if needed. processRequest In this method, usually page rendering related code is written. Effectively, each GUI component is a bean that gets initialised during processRequest. Those who are familiar with D2K forms, something like pre-query may be written in this method. Step 5 In the controller to access the value in field "HelloName" the command is String userContent = pageContext.getParameter("HelloName"); In D2k, we used :block.field. In OAFramework, at submission of page, all the field values get passed into to OAPageContext object. Use getParameter to access the field value To set the value of the field, use OAMessageTextInputBean field HelloName = (OAMessageTextInputBean)webBean.findChildRecursive("HelloName"); fieldHelloName.setText(pageContext,"Setting the default value" ); Note when setting field value in controller: Note 1. Do not set the value in processFormRequest Note 2. If the field comes from View Object, then do not use setText in controller Note 3. For control fields [that are not based on View Objects], you can use setText to assign values in processRequest method Lets take some notes to expand beyond the HelloWorld Project Note 1 In D2K-forms we sort of created a Window, attached to Canvas, and then fields within that Canvas. However in OA Framework, think of Page being fmx/Window, think of Region being a Canvas, and fields being within Regions. This is not a formal/accurate understanding of analogy between D2k and Framework, but is close to being logical. Note 2 In D2k, your Forms fmb file was compiled to fmx. It was fmx file that was deployed on mid-tier. In case of OAF, your OA Page is nothing but a XML file. We call this MDS [meta data]. Whatever name you give to "Page" in OAF, an XML file of the same name gets created. This xml file must then be loaded into database by using XML Importer command. Note 3 Apart from MDS XML file, almost everything else is merely deployed to your mid-tier. Usually this is underneath $JAVA_TOP/oracle/apps/../.. All java files will go underneath java top/oracle/apps/../.. etc. Note 4 When building tutorial, ignore the steps for setting "Attribute Sets". These are not mandatory. Oracle might just have developed their tutorials without including these. Think of these like Visual Attributes of D2K forms Note 5 Controller is where you will write any java code in OA Framework. You can create a Controller per Page or have a different Controller for each of the Regions with the same Page. Note 6 In the method processFormRequest of the Controller, you can access the values of the page by using notation pageContext.getParameter("<fieldname here>"). This method processFormRequest is executed when the OAF Screen/Page is submitted by click of a button. Note 7 Inside the controller, all the Database Related interactions for example interaction with View Objects happen via Application Module. But why so? Because Application Module Manages the transaction state of the Application. OAApplicationModuleImpl oaapplicationmoduleimpl = OAApplicationModuleImpl)oapagecontext.getApplicationModule(oawebbean); OADBTransaction oadbtransaction = OADBTransaction)oaapplicationmoduleimpl.getDBTransaction(); Note 8 In D2K, we have control block or a block based on database view. Similarly, in OA Framework, if the field does not have view Object attached, then it is like a control field. Hence in HelloWorld example, field HelloName is a control field [in D2K terminology]. A view Object can either be based on a view/table, synonym or on a SQL statement. Note 9 I wish to access the fields in multi record block that is based on view Object. Can I do this in Controller? Sure you can. To traverse through those records, do the below ·         Get the reference to the View Object using (OAViewObject)oapagecontext.getApplicationModule(oawebbean).findViewObject("VO Name Here") ·         Loop through the records in View Objects using count returned from oaviewobject.getFetchedRowCount() ·         For each record, fetch the value of the fields within the loop as oracle.jbo.Row row = oaviewobject.getRowAtRangeIndex(loop index here); (String)row.getAttribute("Column name of VO here ");

  Read the article

• C#/.NET Little Wonders: Interlocked Read() and Exchange()

  - by James Michael Hare

  Once again, in this series of posts I look at the parts of the .NET Framework that may seem trivial, but can help improve your code by making it easier to write and maintain. The index of all my past little wonders posts can be found here. Last time we discussed the Interlocked class and its Add(), Increment(), and Decrement() methods which are all useful for updating a value atomically by adding (or subtracting).  However, this begs the question of how do we set and read those values atomically as well? Read() – Read a value atomically Let’s begin by examining the following code: 1: public class Incrementor 2: { 3: private long _value = 0; 4:  5: public long Value { get { return _value; } } 6:  7: public void Increment() 8: { 9: Interlocked.Increment(ref _value); 10: } 11: } 12:  It uses an interlocked increment, as we discuss in my previous post (here), so we know that the increment will be thread-safe.  But, to realize what’s potentially wrong we have to know a bit about how atomic reads are in 32 bit and 64 bit .NET environments. When you are dealing with an item smaller or equal to the system word size (such as an int on a 32 bit system or a long on a 64 bit system) then the read is generally atomic, because it can grab all of the bits needed at once.  However, when dealing with something larger than the system word size (reading a long on a 32 bit system for example), it cannot grab the whole value at once, which can lead to some problems since this read isn’t atomic. For example, this means that on a 32 bit system we may read one half of the long before another thread increments the value, and the other half of it after the increment.  To protect us from reading an invalid value in this manner, we can do an Interlocked.Read() to force the read to be atomic (of course, you’d want to make sure any writes or increments are atomic also): 1: public class Incrementor 2: { 3: private long _value = 0; 4:  5: public long Value 6: { 7: get { return Interlocked.Read(ref _value); } 8: } 9:  10: public void Increment() 11: { 12: Interlocked.Increment(ref _value); 13: } 14: } Now we are guaranteed that we will read the 64 bit value atomically on a 32 bit system, thus ensuring our thread safety (assuming all other reads, writes, increments, etc. are likewise protected).  Note that as stated before, and according to the MSDN (here), it isn’t strictly necessary to use Interlocked.Read() for reading 64 bit values on 64 bit systems, but for those still working in 32 bit environments, it comes in handy when dealing with long atomically. Exchange() – Exchanges two values atomically Exchange() lets us store a new value in the given location (the ref parameter) and return the old value as a result. So just as Read() allows us to read atomically, one use of Exchange() is to write values atomically.  For example, if we wanted to add a Reset() method to our Incrementor, we could do something like this: 1: public void Reset() 2: { 3: _value = 0; 4: } But the assignment wouldn’t be atomic on 32 bit systems, since the word size is 32 bits and the variable is a long (64 bits).  Thus our assignment could have only set half the value when a threaded read or increment happens, which would put us in a bad state. So instead, we could write Reset() like this: 1: public void Reset() 2: { 3: Interlocked.Exchange(ref _value, 0); 4: } And we’d be safe again on a 32 bit system. But this isn’t the only reason Exchange() is valuable.  The key comes in realizing that Exchange() doesn’t just set a new value, it returns the old as well in an atomic step.  Hence the name “exchange”: you are swapping the value to set with the stored value. So why would we want to do this?  Well, anytime you want to set a value and take action based on the previous value.  An example of this might be a scheme where you have several tasks, and during every so often, each of the tasks may nominate themselves to do some administrative chore.  Perhaps you don’t want to make this thread dedicated for whatever reason, but want to be robust enough to let any of the threads that isn’t currently occupied nominate itself for the job.  An easy and lightweight way to do this would be to have a long representing whether someone has acquired the “election” or not.  So a 0 would indicate no one has been elected and 1 would indicate someone has been elected. We could then base our nomination strategy as follows: every so often, a thread will attempt an Interlocked.Exchange() on the long and with a value of 1.  The first thread to do so will set it to a 1 and return back the old value of 0.  We can use this to show that they were the first to nominate and be chosen are thus “in charge”.  Anyone who nominates after that will attempt the same Exchange() but will get back a value of 1, which indicates that someone already had set it to a 1 before them, thus they are not elected. Then, the only other step we need take is to remember to release the election flag once the elected thread accomplishes its task, which we’d do by setting the value back to 0.  In this way, the next thread to nominate with Exchange() will get back the 0 letting them know they are the new elected nominee. Such code might look like this: 1: public class Nominator 2: { 3: private long _nomination = 0; 4: public bool Elect() 5: { 6: return Interlocked.Exchange(ref _nomination, 1) == 0; 7: } 8: public bool Release() 9: { 10: return Interlocked.Exchange(ref _nomination, 0) == 1; 11: } 12: } There’s many ways to do this, of course, but you get the idea.  Running 5 threads doing some “sleep” work might look like this: 1: var nominator = new Nominator(); 2: var random = new Random(); 3: Parallel.For(0, 5, i => 4: { 5:  6: for (int j = 0; j < _iterations; ++j) 7: { 8: if (nominator.Elect()) 9: { 10: // elected 11: Console.WriteLine("Elected nominee " + i); 12: Thread.Sleep(random.Next(100, 5000)); 13: nominator.Release(); 14: } 15: else 16: { 17: // not elected 18: Console.WriteLine("Did not elect nominee " + i); 19: } 20: // sleep before check again 21: Thread.Sleep(1000); 22: } 23: }); And would spit out results like: 1: Elected nominee 0 2: Did not elect nominee 2 3: Did not elect nominee 1 4: Did not elect nominee 4 5: Did not elect nominee 3 6: Did not elect nominee 3 7: Did not elect nominee 1 8: Did not elect nominee 2 9: Did not elect nominee 4 10: Elected nominee 3 11: Did not elect nominee 2 12: Did not elect nominee 1 13: Did not elect nominee 4 14: Elected nominee 0 15: Did not elect nominee 2 16: Did not elect nominee 4 17: ... Another nice thing about the Interlocked.Exchange() is it can be used to thread-safely set pretty much anything 64 bits or less in size including references, pointers (in unsafe mode), floats, doubles, etc.  Summary So, now we’ve seen two more things we can do with Interlocked: reading and exchanging a value atomically.  Read() and Exchange() are especially valuable for reading/writing 64 bit values atomically in a 32 bit system.  Exchange() has value even beyond simply atomic writes by using the Exchange() to your advantage, since it reads and set the value atomically, which allows you to do lightweight nomination systems. There’s still a few more goodies in the Interlocked class which we’ll explore next time! Technorati Tags: C#,CSharp,.NET,Little Wonders,Interlocked

  Read the article

• Portable class libraries and fetching JSON

  - by Jeff

  After much delay, we finally have the Windows Phone 8 SDK to go along with the Windows 8 Store SDK, or whatever ridiculous name they’re giving it these days. (Seriously… that no one could come up with a suitable replacement for “metro” is disappointing in an otherwise exciting set of product launches.) One of the neat-o things is the potential for code reuse, particularly across Windows 8 and Windows Phone 8 apps. This is accomplished in part with portable class libraries, which allow you to share code between different types of projects. With some other techniques and quasi-hacks, you can share some amount of code, and I saw it mentioned in one of the Build videos that they’re seeing as much as 70% code reuse. Not bad. However, I’ve already hit a super annoying snag. It appears that the HttpClient class, with its idiot-proof async goodness, is not included in the Windows Phone 8 class libraries. Shock, gasp, horror, disappointment, etc. The delay in releasing it already caused dismay among developers, and I’m sure this won’t help. So I started refactoring some code I already had for a Windows 8 Store app (ugh) to accommodate the use of HttpWebRequest instead. I haven’t tried it in a Windows Phone 8 project beyond compiling, but it appears to work. I used this StackOverflow answer as a starting point since it’s been a long time since I used HttpWebRequest, and keep in mind that it has no exception handling. It needs refinement. The goal here is to new up the client, and call a method that returns some deserialized JSON objects from the Intertubes. Adding facilities for headers or cookies is probably a good next step. You need to use NuGet for a Json.NET reference. So here’s the start: using System.Net; using System.Threading.Tasks; using Newtonsoft.Json; using System.IO; namespace MahProject {     public class ServiceClient<T> where T : class     {         public ServiceClient(string url)         {             _url = url;         }         private readonly string _url;         public async Task<T> GetResult()         {             var response = await MakeAsyncRequest(_url);             var result = JsonConvert.DeserializeObject<T>(response);             return result;         }         public static Task<string> MakeAsyncRequest(string url)         {             var request = (HttpWebRequest)WebRequest.Create(url);             request.ContentType = "application/json";             Task<WebResponse> task = Task.Factory.FromAsync(                 request.BeginGetResponse,                 asyncResult => request.EndGetResponse(asyncResult),                 null);             return task.ContinueWith(t => ReadStreamFromResponse(t.Result));         }         private static string ReadStreamFromResponse(WebResponse response)         {             using (var responseStream = response.GetResponseStream())                 using (var reader = new StreamReader(responseStream))                 {                     var content = reader.ReadToEnd();                     return content;                 }         }     } } Calling it in some kind of repository class may look like this, if you wanted to return an array of Park objects (Park model class omitted because it doesn’t matter): public class ParkRepo {     public async Task<Park[]> GetAllParks()     {         var client = new ServiceClient<Park[]>(http://superfoo/endpoint);         return await client.GetResult();     } } And then from inside your WP8 or W8S app (see what I did there?), when you load state or do some kind of UI event handler (making sure the method uses the async keyword): var parkRepo = new ParkRepo(); var results = await parkRepo.GetAllParks(); // bind results to some UI or observable collection or something Hopefully this saves you a little time.

  Read the article

• Nokia Windows Phone 8 App Collection

  - by Tim Murphy

  I recently upgraded to a Nokia Lumia 920.  Along with it came the availability of a number of Nokia developed apps or apps that Nokia has made available from other developers.  Below is a summary of some of the ones that I have used to this point.  There are quite a few of them so I won’t be covering everything that is available. Nokia Maps I am quite pleased with the accuracy of Nokia Maps and not having to tap the screen for each turn any more.  The information on the screen is quite good as well.  The couple of improvements I would like to see are for the voice directions to include which street or exit you need to use and improve the search accuracy.  Bing maps had much better search results in my opinion. Nokia Drive This one really had me confused when I first setup the phone.  I was driving down the road and suddenly I am getting notification tones, but there were no visual notifications on the phone.  It seems that in their infinite wisdom Nokia thinks I don’t know when I am going over the speed limit and need to be told. ESPN I really liked my ESPN app on Windows Phone 7.5, but I am not getting the type of experience I was looking for out of this app.  While it allows me to pick my favorite teams, but there isn’t a pivot page or panorama page that shows a summary of my favorite teams.  I have also found that the live tile don’t update very often.  Over all I am rather disappointed compared app produced by ESPN. Smart Shoot I really need to get the kids to let me use this on.  I like the concept, but I need to spend more time with it.  The idea how running the camera through a continuous shooting mode and then picking the best is something that I have done with my DSLR and am glad to see it available here. Cinemagraph Here is a fun filter.  It doesn’t have the most accurate editing features, but it is fun to stop certain parts of a scene and let other parts move.  As a test I stopped the traffic on the highway and let the traffic on the frontage road flow.  It makes for a fun effect.  If nothing else it could be great for sending prank animations to your friends. YouSendIt I have only briefly touched this application.  What I don’t understand is why it is needed.  Most of the functionality seems to be similar to SkyDrive and it gives you less storage.  They only feature that seems to differentiate the app is the signature capability. Creative Studio This app has some nice quick edits, but it is not very comprehensive.  I am also not to thrilled with the user experience.  It puts you though an initial color cast series that I’m not sure why it is there.  Discovery of the remaining adjustments isn’t that great.  In the end I found myself wanting Thumbia back. Panorama This is one of the apps that I like.  I found it easy to use as it guides you with a target circle that you center for it to take the next pictures.  It also stitches the images with amazing speed.  The one thing I wish it had was the capability to turn the phone into portrait orientation and do a taller panorama.  Perhaps we will see this in the future. Nokia Music After getting over the missing album art I found that there were a number of missing features with this app as well.  I have a Zune HD and I am used to being able to go through my collection and adding songs, albums or artists to my now playing.  There also doesn’t seem to be a way to manage playlists that I have seen yet.  Other than that the UI is familiar and it give Nokia City Lens Augmented reality is a cool concept, but I still haven’t seen it implemented in a compelling fashion beyond a demo at TED a couple of years ago.  The app still leaves me wanting as well.  It does give an interesting toy.  It gives you the ability to look for general categories and see general direction and clusters of locations.  I think as this concept is better thought out it will become more compelling. Nokia Trailers I don’t know how often I will use this app, but I do like being able to see what movies are being promoted.  I can’t wait for The Hobbit to come out and the trailer was just what the doctor ordered.  I can see coming back to this app from time to time. PhotoBeamer PhotoBeamer is a strange beast that needs a better instruction manual.  It seems a lot like magic but very confusing.  I need some more testing, but I don’t think this is something that most people are going to understand quickly and may give up before getting it to work.  I may put an update here after playing with it further. Ringtone Maker The app was just published and it didn’t work very well for me. It couldn’t find 95% of the songs that Nokia Music was playing for me and crashed several times.  It also had songs named wrong that when I checked them in Nokia Music they were fine.  This app looks like it has a long way to go. Summary In all I think that Nokia is offering a well rounded set of initial applications that can get any new owner started.  There is definitely room for improvement in all of these apps.  The main need is usability upgrades.  I would guess that with feedback from users they will come up to acceptable levels.  Try them out and see if you agree. del.icio.us Tags: Windows Phone,Nokia,Lumia,Nokia Apps,ESPN,PhotoBeamer,City Lens,YouSendIt,Drive,Maps

  Read the article

< Previous Page | 328 329 330 331 332 333 334 335 336 337 338 339  | Next Page >