Search Results

Search found 18637 results on 746 pages for 'network printers'.

Page 332/746 | < Previous Page | 328 329 330 331 332 333 334 335 336 337 338 339  | Next Page >

• Internet Timeouts with TP-Link TL-WN821N v2 wireless usb stick

  - by user1622959

  A short time after accessing the internet, the browser/download times out. Before the timeout, the internet works OK briefly; afterwards, the wireless is still connected with a strong signal, but every internet access results in a timeout. When I leave the PC for a while, the internet is back just to timeout again as soon as I start using it. The same happens when I reconnect to the router. Also, when I surf the internet, it takes a couple of minutes until the timeout, but when I download something, it times out in a matter of seconds. The wireless adapter works just fine in Windows and internet via ethernet cable works just fine in Ubuntu. Does anyone have the same problem or knows a solution. I use Ubuntu 12.10 x64. The problem occurs since I installed ubuntu (which was a few days ago). Here some stuff that might be usefull: serus@serus-Ubuntu-PC:~$ lsusb Bus 002 Device 002: ID 0cf3:1002 Atheros Communications, Inc. TP-Link TL-WN821N v2 802.11n [Atheros AR9170] serus@serus-Ubuntu-PC:~$ lsmod Module Size Used by carl9170 82083 0 serus@serus-Ubuntu-PC:~$ modinfo carl9170 filename: /lib/modules/3.5.0-21- generic/kernel/drivers/net/wireless/ath/carl9170/carl9170.ko alias: arusb_lnx alias: ar9170usb firmware: carl9170-1.fw description: Atheros AR9170 802.11n USB wireless serus@serus-Ubuntu-PC:~$ iwconfig wlan0 IEEE 802.11bgn ESSID:"virginmedia0137463" Mode:Managed Frequency:2.462 GHz Access Point: A0:21:B7:F8:29:B6 Bit Rate=240 Mb/s Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=66/70 Signal level=-44 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:1399 Invalid misc:18 Missed beacon:0 serus@serus-Ubuntu-PC:~$ sudo lshw -C network *-network description: Wireless interface physical id: 1 bus info: usb@2:2 logical name: wlan0 serial: 00:27:19:bb:00:19 capabilities: ethernet physical wireless configuration: broadcast=yes driver=carl9170 driverversion=3.5.0-21-generic firmware=1.9.4 ip=192.168.0.6 link=yes multicast=yes wireless=IEEE 802.11bgn

  Read the article

• locally logged on a domain joined Win 7 = no authentication prompt so no printing

  - by lyngsie

  We have problems with Win 7 PC's when the user only log on locally on (a domain joined) PC, but still use the Windows printserver. Installed printers suddently stop working and seem to appear offline. In Windows XP the (logged on locally) user would be prompted to autheticate to the domain when printing, but in Windows 7 this feature seem to be faulty or not implemented. I assume the problem is a timeout on the Kerberos ticket. Of course the user has to authenticate to install the printer from the printserver, and that works fine, but in time the authenticaton stops, and no prompt appear. Any suggestions how we can "force" a prompt to authenticate like it happened in XP?

  Read the article

• IP camera's multicast/RTSP conflicting with 2.4GHz Wi-Fi?

  - by jayson

  Here at our business we have a Netgear R7000 running DD-WRT. I have been slowly adding IP cameras which I run using Blue Iris software. The last camera I bought (which is NOT a wireless camera), when I plug it into the network I start having really bad connection issues on the 2.4GHz Wi-Fi network. The 5GHz works fine, just the 2.4GHz all of the sudden has trouble connecting, as if it's conflicting. I've tried playing with the camera settings, different IP addresses, HTTP ports, etc, and discovered it to be a conflict with multicast. When multicast is checked, the Wi-Fi has issues but my video streams via Blue Iris. When unchecked, Wi-Fi works fine but the video won't stream through Blue Iris. The problem is there are no settings in the camera to change the RTSP port, which is set to 34567. Does anyone know something that could fix this issue? It all seems very strange to me but maybe someone has an idea?

  Read the article

• postfix, webmin installed. whats next?

  - by Johnny Craig

  Im trying to get imap running and dont know the problem. i a developer, not a network guy.( our network guy left) we had postfix installed already for outgoing mail on 8 domains. we only had incoming on 1 domain. but that mail server is located on a different ip. now we want incoming on another domain, but we dont want it on another ip, we want it on the same ip as the website itself. I installed dovecot today because my hosting company said i needed it. it seems to run fine. do i need dovecot AND postfix? or are they the same thing? dovecot does not show up anywhere in webmin what i cant seem to figure out how to do is add a user email so i can try to telnet in on port 143. i think i have evrything installed, just need the next step.... sorry for the newb question

  Read the article

• Avoiding spam filters on my CentOS 5.5 64bit server?

  - by Andrew Fashion

  I run a social network on my web server, with about 15,000 members right now. My administration section let's me Mass Email all my users. Currently it uses the built in PHP mail function. What is the best way to congfigure my server to bypass spam? Can I install anything on the server? Or should I just make the social network use SMTP? The admin panel lets me choose SMTP or built-in mail function. I'm not to familiar with mailing from servers, as I usually use Aweber for my mailing, but I cannot use Aweber for this as they will not let me just import 15,000 emails. Let me know, thanks.

  Read the article

• Putting a Windows DC, Exchange in a DMZ

  - by blsub6

  I have one guy at my company telling me that I should put FF:TMG in between my main Internet-facing firewall (Cisco 5510) and put my Exchange server and DC on the internal network. I have another guy telling me that I should put the Exchange server and DC in a DMZ I don't particularly like the idea of having my mailboxes and DC's usernames/passwords in a DMZ and I think that Windows authentication would require me opening up so many ports between my DMZ and my internal network that it would be a moot point to have it out there anyways. What are some thoughts? How do you have it set up?

  Read the article

• How to set my Ubuntu account to super user at all times?

  - by iaddesign

  I have the latest Ubuntu installed and I'll be the only one using it off the network. My question is: how can I make myself super user at all times? Because when I try to delete a file it says I don't have privileges to do so. I know you are going to say it's a security risk but I'm off the network and want to learn all that I can. I don't want to delete the files through the terminal but want to do it through the user interface/explorer. I've installed LAMP and can't copy my site to the www directory. I've tried to remove the preinstalled index file and it won't let me.

  Read the article

• is there a way to prespecify to overwrite files with same name?

  - by Celeritas

  Connections to network drives are ridiculously slow (e.g. 15kb/sec on really good days) and when I'm copying files I leave my desk. My problem is when there is a file with the same name to be overwritten, is there a way to specify in advanced to overwrite files? I know it has the option "do same for next x conflicts" but that doesn't popup until (in some cases) a long time after the files start copying. See my dilemma? Example: copying 500 files, estimated time 2 hours, I leave, after 10 minutes message comes up about file with same name and asks if it should overwrite (in this time copying stalls), I come back 30 minutes latter to find only the files in the 10 minutes copied. Out of curiosity how could the network speed be so bad? I asked the boss and he said because it gets routed around a lot and is just bad :(

  Read the article

• Setting a wireless access point on Ubuntu server 11.10

  - by Solignis

  I am trying to setup a wifi access point with my Ubuntu server. I have managed to get my phone to connect the wireless and now it get a DHCP lease. Though it still cannot ping out or get pinged by anything on my network. I am prety sure my problem is iptables, but I not sure what would be wrong. Here is what my rules look like. (The ones pertaining to the bridge interface) # Allow traffic to / from wireless bridge interface iptables -A INPUT -i br0 -j ACCEPT iptables -A OUTPUT -o br0 -j ACCEPT I am guessing my rules are a little lean, the bridge exists on the same subnet as everything else on my network, I am using a 10.0.0.0/24 subnet. EDIT Oh yeah I should mention also, when I do a ping test, I get Destination Host Unreachable as the error.

  Read the article

• Is it possible to combine two internet connections to increase performance?

  - by cornjuliox

  I've got a small home network, 3 PCs plus a laptop or two when the relatives come to visit, connected to a single cable internet connection. Now, as soon as everyone starts using the 'net the performance starts to suffer and if the load is heavy enough nobody can get anything done and everyone complains. At one point it was so bad that only one of us could use it at a time. I was researching possible solutions to this problem and I heard that internet cafes that utilize 2 internet connections, possibly from different providers, and have some sort of router that allows them to split the traffic between the both of them, with online games going through one and web traffic going through another. Is this possible? What is the technical term for it, and can/should it be applied to a home network setup or is there another solution to this problem?

  Read the article

• Media Drive Permissions

  - by Wade Wofford

  I just switched from a Hackintosh to Linux, and am trying to make sense of it. On my hackintosh, I partitioned a big drive into 3 parts--1 which holds music, 1 for film/tv, and one for the OS. I installed Ubuntu onto the OS partition, and am now trying to make it so I can write to the media drives. I've searched around and tried several things. I tried gksu nautilus in Terminal, which brought me into root permissions. When I select a folder and try to change permissions, I get "The owner could not be changed...Error setting owner: Read-only file system" Ultimately, I have two specific aims: - I want to make it so I can write to the film/tv drive from the ubuntu machine only - I want to make it so I can write to the music drive from the ubuntu machine, or any other machine on the network (all Macs). That is, I want a single music library (an iTunes file) that will serve all Mac laptops/iPads/iPhones on the network, but which XBMC on the Ubuntu machine can also see / read from. Music will be added to the iTunes library via a single Mac laptop, but all other devices should be able to see the music drive.

  Read the article

• Remote Desktop Connection over VPN on mac

  - by Diego Faria

  I'm trying to connect to a Windows computer on over a VPN connection using Remote Desktop connection. I opened Network on mac and created a new connection. Interface: VPN. VPN Type: PPTP. I filled the inputs for server address, account name, password and applied. I connect the VPN and it connects. I open Remote Desktop Connection and put the IP of the machina i want to connect but it dont connect, a problem occurs saying that the machina may be turned off and etc. But in a windows machine I can connect there and the machine is up and running. On my mac I ping to the ip address that a want to connect and it has no response. I think that the vpn have a problem, is there a way for me to certificate that i am on the vpn network ? Whats going on?

  Read the article

• Sudden loss of Wi-Fi connectivity on OS X

  - by GJ.

  Occasionally while I work, without any special provocation, I lose connectivity via Wi-Fi. Other devices connected to the same wifi network have no interruption, and the problem gets resolved once I reboot my MacBook Air, so it's definitely a local problem. Observations: The Wi-Fi symbol in the menu indicates that I'm still connected, but apps can't actually connect neither to the Internet nor to other devices in the LAN. I can't connect to an alternate Wi-Fi network (e.g. Wi-Fi tethering via iPhone). I can connect to the Internet via iPhone USB tethering but this seems to only work some of the time. Only a reboot solves the problem but a regular restart gets stuck on a grey screen with rotating wheel (after all applications have closed) and I have to do a hard reset. How should I go about troubleshooting this? It used to happen very rarely but now is becoming more frequent (approaching once every 2-3 days on average).

  Read the article

• Windows 7 PC refuses to join domain

  - by Alex

  So, we're wiping clean all PCs at our office and migrating them to a new server cluster and a new domain. Last night I tested on PC and it mostly worked except it refuses to join to the domain. Now, our domain is named like EXAMPLE.COM. When I just type EXAMPLE the PC can't find the domain controller, even though I can ping it find. If I type EXAMPLE.COM it seems to work. How can I get it to work with just EXAMPLE? That's how I got all the new servers int he cluster to work (about 20 of them) and I haven't had any issues... The only difference between the Windows 7 PC(s) and the servers is that the clients will be on a 10.0.3.X network where as the servers are on a 10.0.1.X network. Oh, the domain controller and all the other servers are Windows Server 2008 R2. Suggestions will be highly appreciated!

  Read the article

• cmd files to hta

  - by Frode Eskil

  I have a lot of cmd files i use daily for example to add users to local groups, installing printers, run as admin tasks etc. I like to take the scripts i use most frequently and add them to a tabbed hta file, but i have trouble finding a good guide on how to easily do it. Anyone having a good site to share with me? Or do i finally have to start with vb scripting? I have done some but it's so much faster to do a cmd file for me.

  Read the article

• What if a computer with Ethernet

  - by George Nixon

  I'm just revising for an exam on Networks and Data Communications, and there's one thing I don't get about CSMA/CD and Ethernet. It's supposed to be fairly stable, for instance if a computer drops out of the network, it's not a problem like it might be in a token ring network (I think). But Ethernet works by all the other computers waiting for the currently transmitting computer to finish what it's doing, and then the others use CMSA/CD to determine who goes next. What if one computer malfunctioned and kept sending a continuous stream of data in an infinite loop? In fact, is there a standard time for pcs to transmit before they yield to others?

  Read the article

• How anti-virus on the host machne affects performance of virtual machines?

  - by Ladislav Mrnka

  I'm diagnosing some issue with Oracle virtual box where virtual machine sometimes perform terribly slow (much slower then notebook with worse configuration): Notebook i7 (2 cores with HT = 4 logical CPUs), 4GB RAM, 5400 rpm disk, Win 7 64bit Virtual machine (Oracle Virtual Box) Host: i7 (4 cores with HT = 8 logical CPUs, 12 GB RAM, system runs from SSD, virtual machine from 7200 rpm disk, Win 7 64bit) Virtual machine: 4 cores assigned, 8 GB RAM assigned, Win 2008 R2 Enterprise (64 bit) Virtual machine uses bridge to separate network interface (machine has two) VPN for network communication No other virtual machine runs on the host Host has installed ESET Smart Security All SW is updated with last version. My question is if anti-virus on the host machine can somehow affect performance of the virtual machine and if so how can I turn it off without turning the anti-virus itself?

  Read the article

• Server 2008 R2 Datacenter (and all other version) not detecting hardware

  - by Mitchell Skurnik

  I upgraded my ASUS KFN32-D SLI/SAS motherboard to the latest BIOS version and swapped out the 2 dual-core procs with 2 quad core procs. After installing Server 2008 Datacenter onto the system I noticed that it was not connected to the network. I open device manager and see no network adapters. I have to go up to View - Show hidden devices to even see the virtual WAN Miniport adapters. This problem happens in Vista and Windows 7 (all x64). What is even stranger is it all works in x86 mode. What in x64 could be causing windows to not even detect hardware that works in x86? Is the boot manager possibly the culprit?

  Read the article

• How did what appears to be a virus get on my computer? (explanation of situation enclosed)

  - by Massimo

  My system is Windows XP SP3, updated with the latest patches. The PC is connected to a Cisco 877 ADSL router, which does NAT from the internal network to its single static public IP address. There are no forwarded ports, and the router's management console can only be accessed from the inside. I was doing two things: working on a remote office machine via VPN and browsing some web pages on the Cisco web site. The remote network is absolutely safe (it's a lab network, four virtual servers, no publicly accessible services and no users at all; also, none of what I'm going to describe ever happened there). The Cisco web site... well, I suppose is quite safe, too. Suddenly, something happened. Strange popups appears anywhere; programs claiming they're "antimalware", "antispyware" et so on begins autoinstalling; fake Windows Update and Security Center icons pop up in the system tray. svchost.exe began crashing repeatedly. Then, finally, after some minutes of this... BSOD. And, upon rebooting, BSOD again. Even in safe mode. Ok, that was obviously some virus/trojan/whatever. I had to install a new copy of Windows on another partition to clean things up. I found strange executables, services and DLLs almost anywhere. Amongst the other things, user32.dll and ndis.sys had been replaced. A fake software called "Antimalware Doctor" had been installed. There were services with completely random names or even GUIDs (!), and also ones called "IpSect" and "Darkness". There were executable files without an .exe extension. There were even two boot-class drivers, which I'm quite sure are the ones that finally caused the system to crash. A true massacre. Ok, now the questions: What the hell was that?!? It was something more than a simple virus! How did it manage to attack my computer, as I am behind a firewall and was not doing anything even only potentially harmful on the web at the time?

  Read the article

• How to have Windows 7 remember a password for a Domain

  - by Kelly Jones

  About eighteen months ago, I wrote a post covering how to clear saved passwords in Windows XP.  This week at work I was reminded how useful it is to not only deleted saved passwords, but to also setup wildcard credentials using this same interface. The scenario that I run into as consultant working at a client site, is that my laptop is not a member of the Windows Domain that my client uses to secure their network. So, when I need to access file shares, shared printers, or even the clients internal websites, I’m prompted for a name and password.  By creating a wildcard entry on my laptop (for the user account that the client issued to me), I avoid this prompt and can seamlessly access these resources.  (This also works when you’ve configured Outlook to access Exchange via RPC over HTTP.) How to create a credential wild card entry in Windows 7: Go to your Start Menu --> Type "user" into the Search box Click on the “Manage your credentials” in the column on the left Click on the “Add a Windows credential” link Enter the Domain (in my case my client’s domain), something like this: *.contoso.com Enter the username and password That’s it.  You should now be able to access resources in that Domain without being prompted for your name and password.  Please note: if you are required to change your password periodically for that domain, you’ll need to update your saved password as well.

  Read the article

• Internet slow on one router only [the problem only in Ubuntu] [on hold]

  - by mrSuperEvening

  Internet works perfectly on every other router, but browsing sucks at home (slow browsing and slow loading times). I changed DNS servers to 8.8.0.0, still doesn't help. And funnily, download speed is extremely high on this network (meaning torrents for example), but using browsers and loading websites is extremely slow (only on this network). Do I need to change something in router settings or what can I try? By the way, I use wired connection to router. EDIT: There's no problems when using Windows. EDIT: ifconfig: eth0 Link encap:Ethernet HWaddr f2:4d:a0:c0:3f:4c inet addr:192.168.11.8 Bcast:192.168.11.255 Mask:255.255.255.0 inet6 addr: fe80::f24d:a2ff:fec6:3f4c/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:206798 errors:0 dropped:0 overruns:0 frame:0 TX packets:219570 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:76680734 (76.6 MB) TX bytes:21738160 (21.7 MB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:160 errors:0 dropped:0 overruns:0 frame:0 TX packets:160 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:11094 (11.0 KB) TX bytes:11094 (11.0 KB)` ping -c 2 4.2.2.2 PING 4.2.2.2 (4.2.2.2) 56(84) bytes of data. --- 4.2.2.2 ping statistics --- 2 packets transmitted, 0 received, 100% packet loss, time 1007ms ping -c 2 google.com PING google.com (213.159.32.147) 56(84) bytes of data. 64 bytes from lan-213-159-32-147.kns.skynet.lv (213.159.32.147): icmp_seq=1 ttl=61 time=0.936 ms 64 bytes from lan-213-159-32-147.kns.skynet.lv (213.159.32.147): icmp_seq=2 ttl=61 time=0.937 ms --- google.com ping statistics --- 2 packets transmitted, 2 received, 0% packet loss, time 1001ms rtt min/avg/max/mdev = 0.936/0.936/0.937/0.030 ms

  Read the article

• Quick and dirty user management service for Linux VMs?

  - by quack quixote

  Background I have a home server running Debian, and a workstation that runs various VirtualBox VMs (mostly Linuxen but some Windows). At the moment, I'm creating my main user account anew for every new Linux VM. I'd like to make use of a centralized user-management scheme instead, so I can just configure the new VMs for the directory technology and let them handle user lookups automatically. The last time I worked with anything like this, NIS+ was still in fashion. I have a vague notion of what LDAP and Active Directory are, but no knowledge of how to configure them for what I want. Question What user-management/network-directory technology should I use for providing user accounts to my network? The server must run on Debian Lenny. Client configuration should be simple point-at-server-and-go. I need an example configuration for one sample user account. (nice-to-have) I may want to mount the user's home directory from the server. (nice-to-have) The same configuration works with Windows clients.

  Read the article

• TCP/IP performance tuning under KVM/Qemu

  - by vpetersson

  With more and more companies switching to public cloud services, I'm curious what you guys' thoughts are on TCP/IP tuning in the cloud. Is it worth bothering with? Given that you don't have access to the host-server, you're somewhat limited I presume Let's say for the sake of the argument that you're running three MongoDB-servers in a replica-set on FreeBSD or Linux that all sync over an internal network. I'd also be curious if anyone made any actual performance benchmarks to back up their arguments. I benchmarked the various network drivers available for KVM/Qemu here, but I'm curious what the gurus here suggest to tune further. I started playing around a bit with the tuning-recommendations as suggested over here, but interestingly enough I saw a decrease in performance, rather than an increase, but perhaps I didn't fully understand the tweaks. Update: I did a few more benchmarks and posted the result here. Unfortunately the result wasn't really what I expected.

  Read the article

• Accessing shared resource on local computer from users of different physical location

  - by Joe

  Sounds like easy task to some but such a difficult task for me to do... The main requirement for this task is to setup something in offices located on different locations, so (1st question) users are able to log on to the domain without VPN when they are in one of the offices. Additionally, (2nd question)how they can log on to the domain server when they are on the road like in a starbuck, what do they have to do to connect to domain after VPN connection are successful. also it's my understanding that, we can't share resource from computers on different network segments, (3rd question)what is the best solution to bridge/combine two network segments(two office in different locations) so computers of different location can see each other. Thank you in advance for any response.

  Read the article

• Where do Outlook folders go when moved?

  - by balexandre

  I have an account with external user mailboxes opened and accidentally I have moved a folder and now I can't find it anywhere. Action: I clicked on a folder and dragged it into another one. Result: Can't find the moved folder anywhere The above picture is the folders I currently have from my Outlook 2010 (via Exchange 2010), under an AD Network. Where can I (me, having admin rights over the network) retrieve that missing folder again? Attempts: The original and the one folder I need was accidentally moved, but I have created a poi folder and tried the same way, and I got the same result... the folder went missing. I also tried to reboot the client machine and access the same mailbox from OWA ... no luck on both attempts :( Any ideas on how I can retrieve the missing folder and its emails again?

  Read the article

< Previous Page | 328 329 330 331 332 333 334 335 336 337 338 339  | Next Page >