Search Results

Search found 9730 results on 390 pages for 'restart programs'.

Page 333/390 | < Previous Page | 329 330 331 332 333 334 335 336 337 338 339 340  | Next Page >

• Combine the Address & Search Bars in Firefox

  - by Asian Angel

  The Search Bar in Firefox is very useful for finding additional information or images while browsing but the UI space it takes up can be frustrating at times. Now you can reclaim that UI space and still have access to all that searching goodness with the Foobar extension. Note: This is about the Foobar Firefox extension and not to be confused with Foobar2000 the open source music player. Before If you have the “Search Bar” displayed there is no doubt that it is taking up valuable space in your browser’s UI. What you need is the ability to reclaim that UI space and still have the same access to your search capability as before…no more sacrificing one for a gain with the other. After As soon as you have installed the extension you can see that the top part of your browser will look much sleeker without the “Search Bar” to clutter it up. The “Search Engine Icon” will now be visible inside of your “Address Bar” as seen here. You will be able to access the same “Search Engine Menu” as before by clicking on the “Search Engine Icon”. There are two display modes for search results (setting available in the “Options”). The first one shown here is “Simple Mode” where all results are in a condensed format. Notice that not only are there search suggestions but also “Bookmarks & History” listings as well. You can literally get the best of both when conducting a search. Note: The number of entries for search suggestions and bookmark/history listings can be adjusted higher or lower in the “Options”. The second one is “Rich Mode” where the results are shown with more details. Choose the “mode” that best suits your personal style. For our first example you can see the results when we conducted a quick search on “Windows 7” (using the first of the three offerings shown from Bing). Our second example was a search for “Flowers” using our Photobucket search engine. Once again nice results opened in a new tab for us. Options The options are easy to go through. It is really nice to be able to choose the number of results that you want displayed and the format that you want them shown in. Note: Changing the “Suggestion popup style” will require a browser restart to take effect. Conclusion If you love using the “Search Bar” in Firefox but want to reclaim the UI space then you will definitely want to add this extension to your browser. The ability to customize the number of results and choose the formatting make this extension even better. Links Download the Foobar extension (Mozilla Add-ons) Similar Articles Productive Geek Tips Combine the Address Bar and Progress Bar Together in FirefoxHide Some or All of the GUI Bars in FirefoxEnable Partial Match AutoComplete in the Firefox Address BarQuick Firefox UI TweaksAdd Search Forms to the Firefox Search Bar TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Scan your PC for nasties with Panda ActiveScan CleanMem – Memory Cleaner AceStock – The Personal Stock Monitor Add Multiple Tabs to Office Programs The Wearing of the Green – St. Patrick’s Day Theme (Firefox) Perform a Background Check on Yourself

  Read the article

• Installing Eclipse for OSB Development

  - by James Taylor

  OSB provides 2 methods for OSB development, the OSB console, and Eclipse. This post deals with a typical development environment with OSB installed on a remote server and the developer requiring an IDE on their PC for development. As at 11.1.1.4 Eclipse is only IDE supported for OSB development. We are hoping OSB will support JDeveloper in the future. To get the download for Eclipse use the download WebLogic Server with the Oracle Enterprise Pack for Eclipse, e.g. wls1034_oepe111161_win32.exe.To ensure the Eclipse version is compatible with your OSB version I recommend using the Eclipse that comes with the supported WLS server, e.g. OSB 11.1.1.4 you would install WLS 10.3.4+oepe.The install is a 2 step process, install the base Eclipse, then install the OSB plugins. In this example I'm using the 11.1.1.4 install for windows, your versions may differ. You need to download 2 programs, WebLogic Server with the oepe plugin for your OS, and the Oracle Service Bus which is generally generic. Place these files in a directory of your choice. Start the executable I create a new Oracle Home for this installation as it don't want to impact on my JDeveloper install or any other Oracle products installed on my machine. Ignore the support / email notifications Choose a custom install as we only want to install the minimum for Eclipse. If you really want you can do a typical and install everything. Deselect all products then select the Oracle Enterprise Pack for Eclipse. This will select the minimum prerequisites required for install. As I'm only going to use this home for OSB Development I deselect the JRockit JVM. Accept the locations for the installs. If running on a Windows environment you will be asked to start a Node Manger service. This is optional. I have chosen to ignore. Select the user permissions you require, I have set to default. Do a last check to see if the values are correct and continue to install. The install should start. The install should complete successfully. I chose not to run the Quick Start. Extract the OSB download to a location of your choice and double click on the setup.exe. You may be asked to supply a correct java location. Point this to the java installed in your OS. I'm running Windows 7 so I used the 64bit version. Skip the software updates. Set the OSB home to the location of the WLS home installed above Choose a custom install as all we want to install is the OSB Eclipse Plugins. Select OSB IDE. For the rest of the install screens accept the defaults. Start the install There is no need to configure a WLS domain if you only intend to deploy to the remote server. If you need to do this there are other sites how to configure via the configuration wizard. Start Eclipse to make sure the OSB Plugin has been created. In the top right drop down you should see OSB as an option. Connecting to the remote server, select the Server Tab at the bottom Right-click in that frame and select Server. Chose the remote server version and the hostname Provide and name for your server if necessary, and accept the defaults Enter connection details for the remote server Click on the Remote server and it should validate stating its status.Now you ready to develop, Happy developing!

  Read the article

• Share Folders & Files Between Vista and XP Machines

  - by Mysticgeek

  Since Microsoft has three operating systems in use, chances are you’ll find yourself needing to share files between XP, Vista, Windows 7, or some combination of the three. Here we take a look at sharing between a Vista and XP on your home network. Share Without Password Protected Sharing If you’re not worried about who’s accessing the files and folders, the easiest method is to disable Password Protected Sharing. So on the Vista machine open Network and Sharing Center. Under Sharing and Discovery make sure Network Discovery, File Sharing, and, Public Folder Sharing are turned on. Also turn off Password Protected Sharing… Now go into the Vista Public folder, located in C:\Users\Public, and add what you want to share or create a new folder. In this example we created a new folder called XP_Share and added some files to it. On the XP machine go into My Network Places and under Network Tasks click on View Workgroup Computers. Now you’ll see all of the computers on your network which should be part of the same Workgroup. Here we need to double-click on the Vista computer. And there we go…no password to enter so we can access the XP_Share folder or anything else that is located in the Public folder. Share with Password Protected Sharing If you want to keep Password Protected Sharing turned on, then we need to do things a little different. When it’s turned on and you try to access the Vista machine from XP, you’re prompted for a password, and no matter what you think the credentials are, you can’t get access…very annoying. So what we need to do is add the XP Machine as a user. Right-click on Computer from the Start Menu or desktop icon and select Manage from the context menu. The Computer Management screen opens up and you want to expand Local Users and Groups, then the Users folder. Then right-click any open area an select New User. Now create a new user name and password, you can also fill in the other fields if you want. Then make sure to uncheck User must change password at next logon and check the box next to Password never expires. Click the Create button and close out of the New User screen. You’ll then see the new user we created in the list and you can close out of the Computer Management window. Now back on the XP computer when you double-click on the Vista machine, your prompted to log in. Just type in the username and password you just created. Now you’ll have access to the Public folder contents. Set up Sharing on XP If you want to access a shared folder from the Vista computer located on the XP machine, it’s the same process in reverse. On the XP computer in Shared Documents, right-click on the folder you want to share and select Sharing and Security. Then select the radio button next to Share this folder and click Ok. Go into Computer Management and create a new user… Now from the Vista machine double click on the XP machine icon, enter the password, then access the folders and files you need. If you have multiple versions of Windows on your home network, you’ll now be able to access files and folders from each of them. If you want to share between Windows 7 and XP check out our article on how to share files and printers between Windows 7 and XP. You might also want to check out our article on how to share files and printers between Windows 7 and Vista. Similar Articles Productive Geek Tips Show Hidden Files and Folders in Windows 7 or VistaHow To Share Files and Printers Between Windows 7 and VistaShare Files and Printers between Windows 7 and XPHow To Share a Folder the XP Way in Windows VistaMoving Your Personal Data Folders in Windows Vista the Easy Way TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Scan your PC for nasties with Panda ActiveScan CleanMem – Memory Cleaner AceStock – The Personal Stock Monitor Add Multiple Tabs to Office Programs The Wearing of the Green – St. Patrick’s Day Theme (Firefox) Perform a Background Check on Yourself

  Read the article

• Industry perspectives on managing content

  - by aahluwalia

  Earlier this week I was noodling over a topic for my first blog post. My intention for this blog is to bring a practitioner's perspective on ECM to the community; to share and collaborate on best practices and approaches that address today's business problems. Reviewing my past 14 years of experience with web technologies, I wondered what topic would serve as a good "conversation starter". During this time, I received a call from a friend who was seeking insights on how content management applies to specific industries. She approached me because she vaguely remembered that I had worked in the Health Insurance industry in the recent past. She wanted me to tell her about the specific business needs of this industry. She was in for quite a surprise as she found out that I had spent the better part of a decade managing content within the Health Insurance industry and I discovered a great topic for my first blog post! I offer some insights from Health Insurance and invite my fellow practitioners to share their insights from other industries. What does content management mean to these industries? What can solution providers be aware of when offering solutions to these industries? The United States health care system relies heavily on private health insurance, which is the primary source of coverage for approximately 58% Americans. In the late 19th century, "accident insurance" began to be available, which operated much like modern disability insurance. In the late 20th century, traditional disability insurance evolved into modern health insurance programs. The first thing a solution provider must be aware of about the Health Insurance industry is that it tends to be transaction intensive. They are the ones who manage and administer our health plans and process our claims when we visit our health care providers. It helps to keep in mind that they are in the business of delivering health insurance and not technology. You may find the mindset conservative in comparison to the IT industry, however, the Health Insurance industry has benefited and will continue to benefit from the efficiency that technology brings to traditionally paper-driven processes. We are all aware of the impact that Healthcare reform bill has had a significant impact on the Health Insurance industry. They are under a great deal of pressure to explore ways to reduce their administrative costs and increase operational efficiency. Overall, administrative costs of health insurance include the insurer's cost to administer the health plan, the costs borne by employers, health-care providers, governments and individual consumers. Inefficiencies plague health insurance, owing largely to the absence of standardized processes across the industry. To achieve this, industry leaders have come together to establish standards and invest in initiatives to help their healthcare provider partners transition to the next generation of healthcare technology. The move to online services and paperless explanation of benefits are some manifestations of technological advancements in health insurance. Several companies have adopted Toyota's LEAN methodology or Six Sigma principles to improve quality, reduce waste and excessive costs, thereby increasing the value of their plan offerings. A growing number of health insurance companies have transformed their business systems in the past decade alone and adopted some form of content management to reduce the costs involved in administering health plans. The key strategy has been to convert paper documents and forms into electronic formats, automate the content development process and securely distribute content to various audiences via diverse marketing channels, including web and mobile. Enterprise content management solutions can enable document capture of claim forms, manage digital assets, integrate with Enterprise Resource Planning (ERP) and Human Capital Management (HCM) solutions, build Business Process Management (BPM) processes, define retention and disposition instructions to comply with state and federal regulations and allow eBusiness and Marketing departments to develop and deliver web content to multiple websites, mobile devices and portals. Content can be shared securely within and outside the organization using Information Rights Management.  At the end of the day, solution providers who can translate strategic goals into solutions that maximize process automation, increase ease of use and minimize IT overhead are likely to be successful in today's health insurance environment.

  Read the article

• SQL SERVER – Introduction to Big Data – Guest Post

  - by pinaldave

  BIG Data – such a big word – everybody talks about this now a days. It is the word in the database world. In one of the conversation I asked my friend Jasjeet Sigh the same question – what is Big Data? He instantly came up with a very effective write-up.  Jasjeet is working as a Technical Manager with Koenig Solutions. He leads the SQL domain, and holds rich IT industry experience. Talking about Koenig, it is a 19 year old IT training company that offers several certification choices. Some of its courses include SharePoint Training, Project Management certifications, Microsoft Trainings, Business Intelligence programs, Web Design and Development courses etc. Big Data, as the name suggests, is about data that is BIG in nature. The data is BIG in terms of size, and it is difficult to manage such enormous data with relational database management systems that are quite popular these days. Big Data is not just about being large in size, it is also about the variety of the data that differs in form or type. Some examples of Big Data are given below : Scientific data related to weather and atmosphere, Genetics etc Data collected by various medical procedures, such as Radiology, CT scan, MRI etc Data related to Global Positioning System Pictures and Videos Radio Frequency Data Data that may vary very rapidly like stock exchange information Apart from difficulties in managing and storing such data, it is difficult to query, analyze and visualize it. The characteristics of Big Data can be defined by four Vs: Volume: It simply means a large volume of data that may span Petabyte, Exabyte and so on. However it also depends organization to organization that what volume of data they consider as Big Data. Variety: As discussed above, Big Data is not limited to relational information or structured Data. It can also include unstructured data like pictures, videos, text, audio etc. Velocity:  Velocity means the speed by which data changes. The higher is the velocity, the more efficient should be the system to capture and analyze the data. Missing any important point may lead to wrong analysis or may even result in loss. Veracity: It has been recently added as the fourth V, and generally means truthfulness or adherence to the truth. In terms of Big Data, it is more of a challenge than a characteristic. It is difficult to ascertain the truth out of the enormous amount of data and the one that has high velocity. There are always chances of having un-precise and uncertain data. It is a challenging task to clean such data before it is analyzed. Big Data can be considered as the next big thing in the IT sector in terms of innovation and development. If appropriate technologies are developed to analyze and use the information, it can be the driving force for almost all industrial segments. These include Retail, Manufacturing, Service, Finance, Healthcare etc. This will help them to automate business decisions, increase productivity, and innovate and develop new products. Thanks Jasjeet Singh for an excellent write up.  Jasjeet Sign is working as a Technical Manager with Koenig Solutions. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Database, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology Tagged: Big Data

  Read the article

• ORA-4031 Troubleshooting

  - by [email protected]

    QUICKLINK: Note 396940.1 Troubleshooting and Diagnosing ORA-4031 Error Note 1087773.1 : ORA-4031 Diagnostics Tools [Video]   Have you observed an ORA-04031 error reported in your alert log? An ORA-4031 error is raised when memory is unavailable for use or reuse in the System Global Area (SGA).  The error message will indicate the memory pool getting errors and high level information about what kind of allocation failed and how much memory was unavailable.  The challenge with ORA-4031 analysis is that the error and associated trace is for a "victim" of the problem.   The failing code ran into the memory limitation, but in almost all cases it was not part of the root problem.    Looking for the best way to diagnose? When an ORA-4031 error occurs, a trace file is raised and noted in the alert log if the process experiencing the error is a background process.   User processes may experience errors without reports in the alert log or traces generated.   The V$SHARED_POOL_RESERVED view will show reports of misses for memory over the life of the database. Diagnostics scripts are available in Note 430473.1 to help in analysis of the problem.  There is also a training video on using and interpreting the script data Note 1087773.1. 11g DiagnosabilityStarting with Oracle Database 11g Release 1, the Diagnosability infrastructure was introduced which places traces and core files into a location controlled by the DIAGNOSTIC_DEST initialization parameter when an incident, such as an ORA-4031 occurs. For earlier versions, the trace file will be written to either USER_DUMP_DEST (if the error was caught in a user process) or BACKGROUND_DUMP_DEST (if the error was caught in a background process like PMON or SMON). The trace file contains vital information about what led to the error condition.  Note 443529.1 11g Quick Steps to Package and Send Critical Error Diagnostic Information to Support[Video]Oracle Configuration Manager (OCM)Oracle Configuration Manager (OCM) works with My Oracle Support to enable proactive support capability that helps you organize, collect and manage your Oracle configurations.Oracle Configuration Manager Quick Start GuideNote 548815.1: My Oracle Support Configuration Management FAQ Note 250434.1: BULLETIN: Learn More About My Oracle Support Configuration Manager    Common Causes/Solutions The ORA-4031 can occur for many different reasons.  Some possible causes are: SGA components too small for workload Auto-tuning issues Fragmentation due to application design Bug/leaks in memory allocationsFor more on the 4031 and how this affects the SGA, see Note 396940.1 Troubleshooting and Diagnosing ORA-4031 Error Because of the multiple potential causes, it is important to gather enough diagnostics so that an appropriate solution can be identified.  However, most commonly the cause is associated with configuration tuning.   Ensuring that MEMORY_TARGET or SGA_TARGET are large enough to accommodate workload can get around many scenarios.  The default trace associated with the error provides very high level information about the memory problem and the "victim" that ran into the issue.   The data in the default trace is not going to point to the root cause of the problem. When migrating from 9i to 10g and higher, it is necessary to increase the size of the Shared Pool due to changes in the basic design of the shared memory area. Note 270935.1 Shared pool sizing in 10gNOTE: Diagnostics on the errors should be investigated as close to the time of the error(s) as possible.  If you must restart a database, it is not feasible to diagnose the problem until the database has matured and/or started seeing the problems again. Note 801787.1 Common Cause for ORA-4031 in 10gR2, Excess "KGH: NO ACCESS" Memory Allocation ***For reference to the content in this blog, refer to Note.1088239.1 Master Note for Diagnosing ORA-4031 

  Read the article

• Do we still have a case against the goto statement? [closed]

  - by FredOverflow

  Possible Duplicate: Is it ever worthwhile using goto? In a recent article, Andrew Koenig writes: When asked why goto statements are harmful, most programmers will say something like "because they make programs hard to understand." Press harder, and you may well hear something like "I don't really know, but that's what I was taught." For that reason, I'd like to summarize Dijkstra's arguments. He then shows two program fragments, one without a goto and and one with a goto: if (n < 0) n = 0; Assuming that n is a variable of a built-in numeric type, we know that after this code, n is nonnegative. Suppose we rewrite this fragment: if (n >= 0) goto nonneg; n = 0; nonneg: ; In theory, this rewrite should have the same effect as the original. However, rewriting has changed something important: It has opened the possibility of transferring control to nonneg from anywhere else in the program. I emphasized the part that I don't agree with. Modern languages like C++ do not allow goto to transfer control arbitrarily. Here are two examples: You cannot jump to a label that is defined in a different function. You cannot jump over a variable initialization. Now consider composing your code of tiny functions that adhere to the single responsibility principle: int clamp_to_zero(int n) { if (n >= 0) goto n_is_not_negative: n = 0; n_is_not_negative: return n; } The classic argument against the goto statement is that control could have transferred from anywhere inside your program to the label n_is_not_negative, but this simply is not (and was never) true in C++. If you try it, you will get a compiler error, because labels are scoped. The rest of the program doesn't even see the name n_is_not_negative, so it's just not possible to jump there. This is a static guarantee! Now, I'm not saying that this version is better then the one without the goto, but to make the latter as expressive as the first one, we would at least have to insert a comment, or even better yet, an assertion: int clamp_to_zero(int n) { if (n < 0) n = 0; // n is not negative at this point assert(n >= 0); return n; } Note that you basically get the assertion for free in the goto version, because the condition n >= 0 is already written in line 1, and n = 0; satisfies the condition trivially. But that's just a random observation. It seems to me that "don't use gotos!" is one of those dogmas like "don't use multiple returns!" that stem from a time where the real problem were functions of hundreds or even thousand of lines of code. So, do we still have a case against the goto statement, other than that it is not particularly useful? I haven't written a goto in at least a decade, but it's not like I was running away in terror whenever I encountered one. 1 Ideally, I would like to see a strong and valid argument against gotos that still holds when you adhere to established programming principles for clean code like the SRP. "You can jump anywhere" is not (and has never been) a valid argument in C++, and somehow I don't like teaching stuff that is not true. 1: Also, I have never been able to resurrect even a single velociraptor, no matter how many gotos I tried :(

  Read the article

• A tiny Utility to recycle an IIS Application Pool

  - by Rick Strahl

  In the last few weeks I've annoyingly been having problems with an area on my Web site. It's basically ancient articles that are using ASP classic pages and for reasons unknown ASP classic locks up on these pages frequently. It's not an individual page, but ALL ASP classic pages lock up. Ah yes, gotta old tech gone bad. It's not super critical since the content is really old, but still a hassle since it's linked content that still gets quite a bit of traffic. When it happens all ASP classic in that AppPool dies. I've been having a hard time tracking this one down - I suspect an errant COM object I have a Web Monitor running on the server that's checking for failures and while the monitor can detect the failures when the timeouts occur, I didn't have a good way to just restart that particular application pool. I started putzing around with PowerShell, but - as so often seems the case - I can never get the PowerShell syntax right - I just don't use it enough and have to dig out cheat sheets etc. In any case, after about 20 minutes of that I decided to just create a small .NET Console Application that does the trick instead, and in a few minutes I had this:using System; using System.Collections.Generic; using System.Text; using System.DirectoryServices; namespace RecycleApplicationPool { class Program { static void Main(string[] args) { string appPoolName = "DefaultAppPool"; string machineName = "LOCALHOST"; if (args.Length > 0) appPoolName = args[0]; if (args.Length > 1) machineName = args[1]; string error = null; DirectoryEntry root = null; try { Console.WriteLine("Restarting Application Pool " + appPoolName + " on " + machineName + "..."); root = new DirectoryEntry("IIS://" + machineName + "/W3SVC/AppPools/" +appPoolName); Console.WriteLine(root.InvokeGet("Name")); root.Invoke("Recycle"); Console.WriteLine("Application Pool recycling complete..."); } catch(Exception ex) { error = "Error: Unable to access AppPool: " + ex.Message; } if ( !string.IsNullOrEmpty(error) ) { Console.WriteLine(error); return; } } } } To run in you basically provide the name of the ApplicationPool and optionally a machine name if it's not on the local box. RecyleApplicationPool.exe "WestWindArticles" And off it goes. What's nice about AppPool recycling versus doing a full IISRESET is that it only affects the AppPool, and more importantly AppPool recycles happen in a staggered fashion - the existing instance isn't shut down immediately until requests finish while a new instance is fired up to handle new requests. So, now I can easily plug this Executable into my West Wind Web Monitor as an action to take when the site is not responding or timing out which is a big improvement than hanging for an unspecified amount of time. I'm posting this fairly trivial bit of code just in case somebody (maybe myself a few months down the road) is searching for ApplicationPool recyling code. It's clearly trivial, but I've written batch files for this a bunch of times before and actually having a small utility around without having to worry whether Powershell is installed and configured right is actually an improvement. Next time I think about using PowerShell remind me that it's just easier to just build a small .NET Console app, 'k? :-) Resources Download Executable and VS Project© Rick Strahl, West Wind Technologies, 2005-2012Posted in IIS7  .NET  Windows   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• Copy New Files Only in .NET

  - by psheriff

  Recently I had a client that had a need to copy files from one folder to another. However, there was a process that was running that would dump new files into the original folder every minute or so. So, we needed to be able to copy over all the files one time, then also be able to go back a little later and grab just the new files. After looking into the System.IO namespace, none of the classes within here met my needs exactly. Of course I could build it out of the various File and Directory classes, but then I remembered back to my old DOS days (yes, I am that old!). The XCopy command in DOS (or the command prompt for you pure Windows people) is very powerful. One of the options you can pass to this command is to grab only newer files when copying from one folder to another. So instead of writing a ton of code I decided to simply call the XCopy command using the Process class in .NET. The command I needed to run at the command prompt looked like this: XCopy C:\Original\*.* D:\Backup\*.* /q /d /y What this command does is to copy all files from the Original folder on the C drive to the Backup folder on the D drive. The /q option says to do it quitely without repeating all the file names as it copies them. The /d option says to get any newer files it finds in the Original folder that are not in the Backup folder, or any files that have a newer date/time stamp. The /y option will automatically overwrite any existing files without prompting the user to press the "Y" key to overwrite the file. To translate this into code that we can call from our .NET programs, you can write the CopyFiles method presented below. C# using System.Diagnostics public void CopyFiles(string source, string destination){  ProcessStartInfo si = new ProcessStartInfo();  string args = @"{0}\*.* {1}\*.* /q /d /y";   args = string.Format(args, source, destination);   si.FileName = "xcopy";  si.Arguments = args;  Process.Start(si);} VB.NET Imports System.Diagnostics Public Sub CopyFiles(source As String, destination As String)  Dim si As New ProcessStartInfo()  Dim args As String = "{0}\*.* {1}\*.* /q /d /y"   args = String.Format(args, source, destination)   si.FileName = "xcopy"  si.Arguments = args  Process.Start(si)End Sub The CopyFiles method first creates a ProcessStartInfo object. This object is where you fill in name of the command you wish to run and also the arguments that you wish to pass to the command. I created a string with the arguments then filled in the source and destination folders using the string.Format() method. Finally you call the Start method of the Process class passing in the ProcessStartInfo object. That's all there is to calling any command in the operating system. Very simple, and much less code than it would have taken had I coded it using the various File and Directory classes. Good Luck with your Coding,Paul Sheriff ** SPECIAL OFFER FOR MY BLOG READERS **Visit http://www.pdsa.com/Event/Blog for a free video on Silverlight entitled Silverlight XAML for the Complete Novice - Part 1.  

  Read the article

• Use Your Favorite Wallpapers in Windows 7 Starter Edition

  - by Asian Angel

  If you have Windows 7 Starter Edition installed on your netbook, the default wallpaper can get old. If you are tired of looking at the default wallpaper, then join us today as we look at changing it with Oceanis Change Background Windows 7. Special Notes This information is quoted directly from the website and needs to be kept in mind when using Oceanis Change Background Windows 7: If the Oceanis Change Background Windows 7 program no longer works properly after installing some Windows Updates, then uninstall and reinstall the Oceanis Change Background Windows 7 program to have it run properly again. If you ever do an in-place upgrade to another higher level edition of Windows 7 in the future, then be sure to uninstall this Oceanis Change Background Windows 7 program first to avoid incompatibility issues with it in the new edition of Windows 7. It was designed to only work in Windows 7 Starter edition. Before There it is…the default wallpaper everyone with the Starter Edition gets stuck with. Some people may not mind it, but if you are one of the people who really wants something different then get ready to rejoice. After The install file for Oceanis is contained in a zip file so you will need to unzip it to get started. The install process is quick and simple but you will need to do a system restart afterwards. Once you have restarted your computer this is what your screen will look like…do not panic and think that this is all there is to it. This is just the Starter Screen and can be easily changed… Note: Oceanis will auto-start with Windows each time. Using either the Desktop Icon or the Start Menu Entry, open up the Oceanis Main Window. You will see the set of four default wallpapers shown here. At this point the best thing to do is browse for the appropriate folder where you have all of those wonderful new wallpapers just waiting to be used. Note: We found Stretch to be the best Picture Position setting on our system. For our example we had three ready and waiting. We decided to try out the Wallpaper Slideshow feature first. We chose a time frame and saved our changes. Here are our three wallpapers as they switched through. This can be much more interesting than the default wallpaper. There was only one quirk that we encountered while using the Slideshow Setting. On occasion if we minimized a non-maximized window there would be a leftover partial image in place of the window. Our suggestion? Go with one wallpaper at a time and the settings shown below. These are the settings that we had terrific luck with…Only one picture selected, Picture Position = Stretch, & Change Picture Every = Every Day. Using these settings, the Starter Edition acted just like any of the other editions with regard to wallpaper management. Conclusion If you have grown tired of looking at the default wallpaper in Windows 7 Starter Edition then you will certainly appreciate what Oceanis Change Background Windows 7 can do to fix that problem. For more ways to customize your Windows 7 Started Edition, be sure to to check out how to personalize Windows 7 Starter. Links Download Oceanis Change Background Windows 7 Similar Articles Productive Geek Tips Windows 7 Welcome Screen Taking Forever? Here’s the Fix (Maybe)Awesome Desktop Wallpapers: The Windows 7 EditionHow To Customize Wallpaper in Windows 7 Starter EditionDesktop Fun: Starship Theme WallpapersDesktop Fun: Underwater Theme Wallpapers TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows Vista style sidebar for Windows 7 Create Nice Charts With These Web Based Tools Track Daily Goals With 42Goals Video Toolbox is a Superb Online Video Editor Fun with 47 charts and graphs Tomorrow is Mother’s Day

  Read the article

• Tap Into Tier 1 ERP

  - by Christine Randle

  By: Larry Simcox, Senior Director, Accelerate Corporate Programs     Your customers aren’t satisfied with so-so customer service. Your employees aren’t happy with below average salaries.   So why would you settle for second-rate or tier 2 ERP?   A recent report from Nucleus Research found that usability improvements and rapid implementation tools are simplifying deployments, putting tier 1 enterprise applications well within reach for midsize companies. So how can your business tap into the power of tier 1 ERP? And what are the best ways to manage a deployment?   The Reputation of ERP Implementations Overhauling internal operations and implementing ERP can be a challenging endeavor for organizations of all sizes. Midsize companies often shy away from enterprise-class ERP, fearing complexity, limited resources and perceived challenging deployments. Many forward thinking executives experienced ERP implementations in the late 90s and early 2000s and embrace a strategy to grow their business by investing in a foundation for innovation and growth via ERP modernization projects.   In recent years there has been a strong consumerization of IT with enterprise applications and their delivery methods evolving to become more user-friendly.  Today, usability improvements and modern implementation tools have made top-tier ERP solutions more accessible for growing companies. Nucleus found that because enterprise-class software can now be rapidly deployed, the payback is quicker, the risks are lower, the software is less disruptive and overall, companies can differentiate themselves from their competitors and achieve more success with the advantages these types of systems deliver.   Tapping into the power of tier 1 ERP can be made much easier with Oracle Accelerate solutions. Created by Oracle's expert partners and reviewed by Oracle, Oracle Accelerate solutions are simple to deploy, industry-specific, packaged solutions that provide a fast time to benefit, which means getting the right solution in place quickly, inexpensively with a controlled scope and predictable returns.   How are growing midsize companies successfully deploying tier 1 ERP? According to Nucleus Research, companies can increase success in their tier 1 ERP deployments by limiting customization, planning a rapid go-live, bettering communication across departments, and considering different delivery options. Oracle Accelerate solutions incorporate industry best practices and encourage rapid deployments. And even more, Nucleus found customers deploying tier 1 ERP with Oracle that had used Oracle Business Accelerators, Oracle’s rapid implementation tools, reduced the time to deploy Oracle E-Business Suite by at least 50 percent.   Industrial manufacturer L.H. Dottie is one company that needed ERP with enhanced capabilities to support its growth and streamline business processes. Using out-of-the-box configuration of Oracle E-Business Suite modules (provided by Oracle Business Accelerators and delivered by Oracle Partner C3 Business Solutions), L.H. Dottie was able to speed its implementation and went live in just six and a half months. With tier 1 ERP, the company was able to grow and do its business better, automating a variety of processes, accelerating product delivery and gaining powerful data analysis capabilities that helped drive its business into further regions. See more details about their ERP implementation here.   Tier 1 enterprise-class applications have proven to boost the success of Oracle’s midsize customers. As Nucleus Research iterates, companies poised for growth or seeking to compete against larger competitors absolutely can tap into the power of tier 1 ERP and position themselves as enterprise-class through leveraging Oracle Accelerate solutions.   You can learn more here about The Evolving Business Case for Tier - 1 ERP in Midsize Companies in our exclusive webcast with Nucleus.   ###  

  Read the article

• Use Twitter in Windows Media Center with TwitterMCE

  - by DigitalGeekery

  Are you a Media Center user who just can’t get enough Twitter? If so, you may want to check out the TwitterMCE plugin for Windows Media Center. Download and install TwitterMCE application. (See download link below) When you start Windows Media Center, you’ll find the TwitterMCE icon listed in the Extras. When you open the plug-in you’ll be prompted for a Paypal donation and have to wait out the 15 second timer. Next, you’ll need to log in to your Twitter account. Enter your Twitter account username and password. You can do this with the keyboard or by entering letters and numbers with a Media Center remote. When you are finished, select the Login button.   You’ll be prompted to select Standard or Video Mode. Standard displays items in a more vertical fashion. Video displays them horizontally and one at a time, and also allows you to watch Live TV, a movie, or video at the same time. Reading Your Tweets Clicking on Home allows you to read the latest Twitter messages from your friends. You can access the previous 20 tweets. Scroll up and down to see additional messages in Standard mode, ro right and left in Video mode. Click on the individual Twitter messages to get more information, such as which friend sent the tweet. Create a Tweet To Create a Tweet directly from Media Center, select the Update button. Type out your message using your keyboard or your remote and the on-screen keyboard. When you are finished, select Update to send your Twitter message. A few moments later your new tweet will appear.   To send a tweet while you are watching TV or a video, log in to the TwitterMCE app, choose the Video mode, and select Update.   Enter your tweet with the remote or keyboard. Select Update to send the tweet.   You can also view Mentions, Friends, and Followers selecting the appropriate button.   Scroll through your list of friends to read their latest tweets.   The TwitterMCE plugin works will Windows Vista Premium, Ultimate, and Windows 7. It might not completely replace your favorite Twitter App, but it will allow you to send all the tweets you want without having to take your eyes off your favorite TV programs. Download TwitterMCE Similar Articles Productive Geek Tips Using Netflix Watchnow in Windows Vista Media Center (Gmedia)Schedule Updates for Windows Media CenterIntegrate Hulu Desktop and Windows Media Center in Windows 7Add Color Coding to Windows 7 Media Center Program GuideIntegrate Boxee with Media Center in Windows 7 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Get Your Delicious Bookmarks In Firefox’s Awesome Bar Manage Photos Across Different Social Sites With Dropico Test Drive Windows 7 Online Download Wallpapers From National Geographic Site Spyware Blaster v4.3 Yes, it’s Patch Tuesday

  Read the article

• Developer Preview available for the Java Access Bridge is now included in Java SE 7 Update 6

  - by Ragini Prasad

  The Java Access Bridge product is now being included with Java SE 7u6. Manual installation of the Java Access Bridge will no longer be required. All Access Bridge files will be automatically installed by the JRE and the JDK.             The Developer Preview for this feature is now available and can be downloaded from http://jdk7.java.net/download.html.            By default, the Java Access Bridge is disabled. In order to use the Java Access Bridge, enable it using the steps mentioned below and test your applications for accessibility.             Enable the Java Access Bridge: Use one of these mechanism:             1. Ease Of Access control panel.     On Windows Vista and later the Java Access Bridge can be enabled     from Ease of Access Center.     Select "Use the computer without a display". In "Other programs     installed" section , select the check box to     "Enable Java Access Bridge" and apply. 2. Or run the following command in the Command Window.     %JRE_HOME%\bin\jabswitch -enable Note: You must restart your Assistive Technology software and Java application after enabling the bridge.             Test the Java Access Bridge: 1. Enable the Java Access Bridge as described above. 2. Run an Assistive Technology that supports the Java Access Bridge. 3. Run a Java application. Ensure that the Assistive Technology  reads    the values of your application. Disable the Java Access Bridge:             Run the following command from the Command Window.     %JRE_HOME%\bin\jabswitch -disable                 Note: The Ease Of Access control panel cannot be used to disable the bridge. You must use jabswitch from the Command window to disable the Java Access Bridge.

  Read the article

• Interrupted Upgrade from 11.10 to 12.04

  - by Tamil

  My upgrade using alternative iso from 11.10 to 12.04 got interrupted and I had to hard restart my machine. Now I feel that everything is recovered except my already installed packages like vim. How do I backup my home folder for fresh installation of ubuntu? Following are the errors I'm facing I couldn't mark any package for re-installation in synaptic or remove and install too. output of sudo apt-get install vim Building dependency tree Reading state information... Done Package vim is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source E: Package 'vim' has no installation candidate If I try installing it from synaptic I get apache2.2-common: Package apache2.2-common has no available version, but exists in the database. This typically means that the package was mentioned in a dependency and never uploaded, has been obsoleted or is not available with the contents of sources.list my sources.list file # added by the release upgrader # deb cdrom:[Ubuntu 12.04.1 LTS _Precise Pangolin_ - Release amd64 (20120822.4)]/ precise main restricted # added by the release upgrader # # deb cdrom:[Ubuntu 12.04.1 LTS _Precise Pangolin_ - Release amd64 (20120822.4)]/ precise main restricted # deb cdrom:[Ubuntu 11.04 _Natty Narwhal_ - Release amd64 (20110427.1)]/ natty main restricted # See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to # newer versions of the distribution. deb http://archive.ubuntu.com/ubuntu precise main restricted deb-src http://archive.ubuntu.com/ubuntu precise main restricted ## Major bug fix updates produced after the final release of the ## distribution. deb http://archive.ubuntu.com/ubuntu precise-updates main restricted deb-src http://archive.ubuntu.com/ubuntu precise-updates main restricted ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team. Also, please note that software in universe WILL NOT receive any ## review or updates from the Ubuntu security team. deb http://archive.ubuntu.com/ubuntu precise universe deb-src http://archive.ubuntu.com/ubuntu precise universe deb http://archive.ubuntu.com/ubuntu precise-updates universe deb-src http://archive.ubuntu.com/ubuntu precise-updates universe ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team, and may not be under a free licence. Please satisfy yourself as to ## your rights to use the software. Also, please note that software in ## multiverse WILL NOT receive any review or updates from the Ubuntu ## security team. deb http://archive.ubuntu.com/ubuntu precise multiverse deb-src http://archive.ubuntu.com/ubuntu precise multiverse deb http://archive.ubuntu.com/ubuntu precise-updates multiverse deb-src http://archive.ubuntu.com/ubuntu precise-updates multiverse ## Uncomment the following two lines to add software from the 'backports' ## repository. ## N.B. software from this repository may not have been tested as ## extensively as that contained in the main release, although it includes ## newer versions of some applications which may provide useful features. ## Also, please note that software in backports WILL NOT receive any review ## or updates from the Ubuntu security team. # deb http://us.archive.ubuntu.com/ubuntu/ natty-backports main restricted universe multiverse # deb-src http://us.archive.ubuntu.com/ubuntu/ natty-backports main restricted universe multiverse deb http://archive.ubuntu.com/ubuntu precise-security main restricted deb-src http://archive.ubuntu.com/ubuntu precise-security main restricted deb http://archive.ubuntu.com/ubuntu precise-security universe deb-src http://archive.ubuntu.com/ubuntu precise-security universe deb http://archive.ubuntu.com/ubuntu precise-security multiverse deb-src http://archive.ubuntu.com/ubuntu precise-security multiverse ## Uncomment the following two lines to add software from Canonical's ## 'partner' repository. ## This software is not part of Ubuntu, but is offered by Canonical and the ## respective vendors as a service to Ubuntu users. deb http://archive.canonical.com/ubuntu precise partner # deb-src http://archive.canonical.com/ubuntu natty partner ## This software is not part of Ubuntu, but is offered by third-party ## developers who want to ship their latest software. deb http://extras.ubuntu.com/ubuntu precise main deb-src http://extras.ubuntu.com/ubuntu precise main # deb http://tamil.3758_gmail.com:[email protected]/free unstable main # disabled on upgrade to oneiric # deb http://debian.datastax.com/natty oneiric main # disabled on upgrade to oneiric sudo apt-get update Err http://archive.ubuntu.com precise InRelease Err http://archive.canonical.com precise InRelease Err http://archive.ubuntu.com precise-updates InRelease Err http://archive.ubuntu.com precise-security InRelease Err http://extras.ubuntu.com precise InRelease Err http://archive.canonical.com precise Release.gpg Unable to connect to 172.16.140.249:3142: Err http://archive.ubuntu.com precise Release.gpg Unable to connect to 172.16.140.249:3142: Err http://archive.ubuntu.com precise-updates Release.gpg Unable to connect to 172.16.140.249:3142: Err http://extras.ubuntu.com precise Release.gpg Unable to connect to 172.16.140.249:3142: Err http://archive.ubuntu.com precise-security Release.gpg Unable to connect to 172.16.140.249:3142: W: Failed to fetch http://archive.ubuntu.com/ubuntu/dists/precise/InRelease

  Read the article

• How do I get sound output on HDMI without the need to start X?

  - by Magnus Hoff

  I have a headless machine connected to my sound system, and I am using it to run a music playing daemon that I control over the network. (Among other things) However, I can't seem to be able to have sound come out of my speakers without running X. I am running pulse audio in a system wide instance and my daemon is not running within X. Nevertheless, when my daemon is playing music without me hearing it, I can fix it by running startx in an unrelated session. After X starts, I can hear the sound. The sound disappears again if I kill the X server. Interestingly/annoyingly, the sound also stops after X has been running for a few minutes. This could possibly be because of a screen saver of some sort, but I haven't been able to verify or falsify this theory. So my current workaround is to ssh into the box whenever I want music and startx, and restart it every fifteen minutes or so. I'd like to do better. I have been able to verify the following: Adjustments in alsamixer have no effect on this problem. The relevant output channel is never muted In alsamixer, I can see no difference between when the sound is working and when it isn't Nothing is muted in pactl list There is no difference in the output from pactl list between before starting X and after it's started. (Except the identifier of the pactl instance connected to pulse, which is different each time you run pactl) The user running the music daemon is a member of the groups audio, pulse and pulse-access The music daemon program does not report any error messages and acts as if it is playing the music like it should Some form of dbus daemon is running. ps aux|grep dbus reports dbus-daemon --system --fork --activation=upstart before and after I have started X Some details about my hardware: Motherboard: http://www.asus.com/Motherboards/AT5IONTI_DELUXE/ Sound chip: Nvidia GPU 0b HDMI/DP (from alsamixer) Using HDMI for output (Machine also has an Intel Realtek ALC887 that I am not using) Output of lsmod: Module Size Used by deflate 12617 0 zlib_deflate 27139 1 deflate ctr 13201 0 twofish_generic 16635 0 twofish_x86_64_3way 25287 0 twofish_x86_64 12907 1 twofish_x86_64_3way twofish_common 20919 3 twofish_generic,twofish_x86_64_3way,twofish_x86_64 camellia 29348 0 serpent 29125 0 blowfish_generic 12530 0 blowfish_x86_64 21466 0 blowfish_common 16739 2 blowfish_generic,blowfish_x86_64 cast5 25112 0 des_generic 21415 0 xcbc 12815 0 rmd160 16744 0 bnep 18281 2 rfcomm 47604 12 sha512_generic 12796 0 crypto_null 12918 0 parport_pc 32866 0 af_key 36389 0 ppdev 17113 0 binfmt_misc 17540 1 nfsd 281980 2 ext2 73795 1 nfs 436929 1 lockd 90326 2 nfsd,nfs fscache 61529 1 nfs auth_rpcgss 53380 2 nfsd,nfs nfs_acl 12883 2 nfsd,nfs sunrpc 255224 16 nfsd,nfs,lockd,auth_rpcgss,nfs_acl btusb 18332 2 vesafb 13844 2 pl2303 17957 1 ath3k 12961 0 bluetooth 180153 24 bnep,rfcomm,btusb,ath3k snd_hda_codec_hdmi 32474 4 nvidia 11308613 0 ftdi_sio 40679 1 usbserial 47113 6 pl2303,ftdi_sio psmouse 97485 0 snd_hda_codec_realtek 224173 1 snd_hda_intel 33719 5 snd_hda_codec 127706 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel serio_raw 13211 0 snd_seq_midi 13324 0 snd_hwdep 17764 1 snd_hda_codec snd_pcm 97275 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec snd_rawmidi 30748 1 snd_seq_midi snd_seq_midi_event 14899 1 snd_seq_midi snd_seq 61929 2 snd_seq_midi,snd_seq_midi_event snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq snd 79041 20 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device asus_atk0110 18078 0 mac_hid 13253 0 jc42 13948 0 soundcore 15091 1 snd snd_page_alloc 18529 2 snd_hda_intel,snd_pcm coretemp 13554 0 i2c_i801 17570 0 lp 17799 0 parport 46562 3 parport_pc,ppdev,lp r8169 62154 0 Any ideas? What does X do that's so important?

  Read the article

• Using Oracle Linux iSCSI targets with Oracle VM

  - by wim.coekaerts

  A few days ago I had written a blog entry on how to use Oracle Solaris 10 (in my case), ZFS and the iSCSI target feature in Oracle Solaris to create a set of devices exported to my Oracle VM server. Oracle Linux can do this as well and I wanted to make sure I also tried out how to do this on Oracle Linux and here are the results. When you install Oracle Linux 5 update 5 (anything newer than update 3), it comes with an rpm called scsi-target-utils. To begin your quest, should you choose to accept it :) make sure this is installed. rpm -qa |grep scsi-target If it is not installed : up2date scsi-target-utils The target utils come with a tool tgtadm which is similar to iscsitadm on Oracle Solaris. There are 2 components again on the iSCSI server side. (1) create volumes - we will use lvm with lvcreate (2) expose a target using tgtadm. My server has a simple setup. All the disks are part of a single volume group called vgroot. To export a 50Gb volume I just create a new volume : lvcreate -L 50G -nmytest1 vgroot This will show up as a new volume in /dev/mapper as /dev/mapper/vgroot-mytest1. Create as many as you want for your environment. Since I already have my blog entry about the 5 volumes, I am not going to repeat the whole thing. You can just go look at the previous blog entry. Now that we have created the volume, we need to use tgtadm to set it up : make sure the service is running : /etc/init.d/tgtd start or service tgtd start (if you want to keep it running you can do chkconfig tgtd on to start it automatically at boottime) Next you need a targetname to set everything up. My recommendation would be to install iscsi-initiator-utils . This will create an iscsi id and put it in /etc/iscsi/initiatorname.iscsi. For convenience you can do : source /etc/iscsi/initiatorname.iscsi echo $InitiatorName and from here on use $InitiatorName instead of the long complex iqn. create your target : tgtadm --lld iscsi --op new --mode target --tid 1 -T $InitiatorName to show the status : tgtadm --lld iscsi --op show --mode target add the volume previously created : tgtadm --lld iscsi --op new --mode logicalunit --tid 1 --lun 1 -b /dev/mapper/vgroot-mytest1 re-run status to see it's there : tgtadm --lld iscsi --op show --mode target and just like on Oracle Solaris you now have to export (bind) it : tgtadm --lld iscsi --op bind --mode target --tid 1 -I iqn.1986-03.com.sun:01:2a7526f0ffff If you want to export the lun to every iscsi initiator then replace the iqn with ALL. Of course you have to add the iqn of each iscsi initiator or client you want to connect. In the case of my 2 node Oracle VM server setup, both Oracle VM server's initiator names would have to be added. use status again to see that it has this iqn under ACL tgtadm --lld iscsi --op show --mode target You can drop the --lld iscsi if you want, or alias it. It just makes the command line more obvious as to what you are doing. Oracle VM side : Refer back to the previous blog entry for the detailed setup of my Oracle VM server volumes but the exact same commands will be used there. discover : iscsiadm --mode discovery --type sendtargets --portal login : iscsiadm --mode node --targetname iscsi targetname --portal --login get devices : /etc/init.d/iscsi restart and voila you should be in business. have fun.

  Read the article

• OpenVPN - Windows 8 to Windows 2008 Server, not connecting

  - by niico

  I have followed this tutorial about setting up an OpenVPN Server on Windows Server - and a client on Windows (in this case Windows 8). The server appears to be running fine - but it is not connecting with this error: Mon Jul 22 19:09:04 2013 Warning: cannot open --log file: C:\Program Files\OpenVPN\log\my-laptop.log: Access is denied. (errno=5) Mon Jul 22 19:09:04 2013 OpenVPN 2.3.2 x86_64-w64-mingw32 [SSL (OpenSSL)] [LZO] [PKCS11] [eurephia] [IPv6] built on Jun 3 2013 Mon Jul 22 19:09:04 2013 MANAGEMENT: TCP Socket listening on [AF_INET]127.0.0.1:25340 Mon Jul 22 19:09:04 2013 Need hold release from management interface, waiting... Mon Jul 22 19:09:05 2013 MANAGEMENT: Client connected from [AF_INET]127.0.0.1:25340 Mon Jul 22 19:09:05 2013 MANAGEMENT: CMD 'state on' Mon Jul 22 19:09:05 2013 MANAGEMENT: CMD 'log all on' Mon Jul 22 19:09:05 2013 MANAGEMENT: CMD 'hold off' Mon Jul 22 19:09:05 2013 MANAGEMENT: CMD 'hold release' Mon Jul 22 19:09:05 2013 Socket Buffers: R=[65536->65536] S=[65536->65536] Mon Jul 22 19:09:05 2013 UDPv4 link local: [undef] Mon Jul 22 19:09:05 2013 UDPv4 link remote: [AF_INET]66.666.66.666:9999 Mon Jul 22 19:09:05 2013 MANAGEMENT: >STATE:1374494945,WAIT,,, Mon Jul 22 19:10:05 2013 TLS Error: TLS key negotiation failed to occur within 60 seconds (check your network connectivity) Mon Jul 22 19:10:05 2013 TLS Error: TLS handshake failed Mon Jul 22 19:10:05 2013 SIGUSR1[soft,tls-error] received, process restarting Mon Jul 22 19:10:05 2013 MANAGEMENT: >STATE:1374495005,RECONNECTING,tls-error,, Mon Jul 22 19:10:05 2013 Restart pause, 2 second(s) Note I have changed the IP and port no (it uses a non-standard port for security reasons). That port is open on the hardware firewall. The server logs are showing a connection attempt from my client: TLS: Initial packet from [AF_INET]118.68.xx.xx:65011, sid=081af4ed xxxxxxxx Mon Jul 22 14:19:15 2013 118.68.xx.xx:65011 TLS Error: TLS key negotiation failed to occur within 60 seconds (check your network connectivity) How can I problem solve this & find the problem? Thx Update - Client config file: ############################################## # Sample client-side OpenVPN 2.0 config file # # for connecting to multi-client server. # # # # This configuration can be used by multiple # # clients, however each client should have # # its own cert and key files. # # # # On Windows, you might want to rename this # # file so it has a .ovpn extension # ############################################## # Specify that we are a client and that we # will be pulling certain config file directives # from the server. client # Use the same setting as you are using on # the server. # On most systems, the VPN will not function # unless you partially or fully disable # the firewall for the TUN/TAP interface. ;dev tap dev tun # Windows needs the TAP-Win32 adapter name # from the Network Connections panel # if you have more than one. On XP SP2, # you may need to disable the firewall # for the TAP adapter. ;dev-node MyTap # Are we connecting to a TCP or # UDP server? Use the same setting as # on the server. ;proto tcp proto udp # The hostname/IP and port of the server. # You can have multiple remote entries # to load balance between the servers. remote 00.00.00.00 1194 ;remote 00.00.00.00 9999 ;remote my-server-2 1194 # Choose a random host from the remote # list for load-balancing. Otherwise # try hosts in the order specified. ;remote-random # Keep trying indefinitely to resolve the # host name of the OpenVPN server. Very useful # on machines which are not permanently connected # to the internet such as laptops. resolv-retry infinite # Most clients don't need to bind to # a specific local port number. nobind # Downgrade privileges after initialization (non-Windows only) ;user nobody ;group nobody # Try to preserve some state across restarts. persist-key persist-tun # If you are connecting through an # HTTP proxy to reach the actual OpenVPN # server, put the proxy server/IP and # port number here. See the man page # if your proxy server requires # authentication. ;http-proxy-retry # retry on connection failures ;http-proxy [proxy server] [proxy port #] # Wireless networks often produce a lot # of duplicate packets. Set this flag # to silence duplicate packet warnings. ;mute-replay-warnings # SSL/TLS parms. # See the server config file for more # description. It's best to use # a separate .crt/.key file pair # for each client. A single ca # file can be used for all clients. ca "C:\\Program Files\\OpenVPN\\config\\ca.crt" cert "C:\\Program Files\\OpenVPN\\config\\my-laptop.crt" key "C:\\Program Files\\OpenVPN\\config\\my-laptop.key" # Verify server certificate by checking # that the certicate has the nsCertType # field set to "server". This is an # important precaution to protect against # a potential attack discussed here: # http://openvpn.net/howto.html#mitm # # To use this feature, you will need to generate # your server certificates with the nsCertType # field set to "server". The build-key-server # script in the easy-rsa folder will do this. ns-cert-type server # If a tls-auth key is used on the server # then every client must also have the key. ;tls-auth ta.key 1 # Select a cryptographic cipher. # If the cipher option is used on the server # then you must also specify it here. ;cipher x # Enable compression on the VPN link. # Don't enable this unless it is also # enabled in the server config file. comp-lzo # Set log file verbosity. verb 3 # Silence repeating messages ;mute 20 Server config file: ################################################# # Sample OpenVPN 2.0 config file for # # multi-client server. # # # # This file is for the server side # # of a many-clients <-> one-server # # OpenVPN configuration. # # # # OpenVPN also supports # # single-machine <-> single-machine # # configurations (See the Examples page # # on the web site for more info). # # # # This config should work on Windows # # or Linux/BSD systems. Remember on # # Windows to quote pathnames and use # # double backslashes, e.g.: # # "C:\\Program Files\\OpenVPN\\config\\foo.key" # # # # Comments are preceded with '#' or ';' # ################################################# # Which local IP address should OpenVPN # listen on? (optional) ;local 00.00.00.00 # Which TCP/UDP port should OpenVPN listen on? # If you want to run multiple OpenVPN instances # on the same machine, use a different port # number for each one. You will need to # open up this port on your firewall. std 1194 port 1194 # TCP or UDP server? ;proto tcp proto udp # "dev tun" will create a routed IP tunnel, # "dev tap" will create an ethernet tunnel. # Use "dev tap0" if you are ethernet bridging # and have precreated a tap0 virtual interface # and bridged it with your ethernet interface. # If you want to control access policies # over the VPN, you must create firewall # rules for the the TUN/TAP interface. # On non-Windows systems, you can give # an explicit unit number, such as tun0. # On Windows, use "dev-node" for this. # On most systems, the VPN will not function # unless you partially or fully disable # the firewall for the TUN/TAP interface. ;dev tap dev tun # Windows needs the TAP-Win32 adapter name # from the Network Connections panel if you # have more than one. On XP SP2 or higher, # you may need to selectively disable the # Windows firewall for the TAP adapter. # Non-Windows systems usually don't need this. ;dev-node MyTap # SSL/TLS root certificate (ca), certificate # (cert), and private key (key). Each client # and the server must have their own cert and # key file. The server and all clients will # use the same ca file. # # See the "easy-rsa" directory for a series # of scripts for generating RSA certificates # and private keys. Remember to use # a unique Common Name for the server # and each of the client certificates. # # Any X509 key management system can be used. # OpenVPN can also use a PKCS #12 formatted key file # (see "pkcs12" directive in man page). ca "C:\\Program Files\\OpenVPN\\config\\ca.crt" cert "C:\\Program Files\\OpenVPN\\config\\server.crt" key "C:\\Program Files\\OpenVPN\\config\\server.key" # Diffie hellman parameters. # Generate your own with: # openssl dhparam -out dh1024.pem 1024 # Substitute 2048 for 1024 if you are using # 2048 bit keys. dh "C:\\Program Files\\OpenVPN\\config\\dh2048.pem" # Configure server mode and supply a VPN subnet # for OpenVPN to draw client addresses from. # The server will take 10.8.0.1 for itself, # the rest will be made available to clients. # Each client will be able to reach the server # on 10.8.0.1. Comment this line out if you are # ethernet bridging. See the man page for more info. server 10.8.0.0 255.255.255.0 # Maintain a record of client <-> virtual IP address # associations in this file. If OpenVPN goes down or # is restarted, reconnecting clients can be assigned # the same virtual IP address from the pool that was # previously assigned. ifconfig-pool-persist ipp.txt # Configure server mode for ethernet bridging. # You must first use your OS's bridging capability # to bridge the TAP interface with the ethernet # NIC interface. Then you must manually set the # IP/netmask on the bridge interface, here we # assume 10.8.0.4/255.255.255.0. Finally we # must set aside an IP range in this subnet # (start=10.8.0.50 end=10.8.0.100) to allocate # to connecting clients. Leave this line commented # out unless you are ethernet bridging. ;server-bridge 10.8.0.4 255.255.255.0 10.8.0.50 10.8.0.100 # Configure server mode for ethernet bridging # using a DHCP-proxy, where clients talk # to the OpenVPN server-side DHCP server # to receive their IP address allocation # and DNS server addresses. You must first use # your OS's bridging capability to bridge the TAP # interface with the ethernet NIC interface. # Note: this mode only works on clients (such as # Windows), where the client-side TAP adapter is # bound to a DHCP client. ;server-bridge # Push routes to the client to allow it # to reach other private subnets behind # the server. Remember that these # private subnets will also need # to know to route the OpenVPN client # address pool (10.8.0.0/255.255.255.0) # back to the OpenVPN server. ;push "route 192.168.10.0 255.255.255.0" ;push "route 192.168.20.0 255.255.255.0" # To assign specific IP addresses to specific # clients or if a connecting client has a private # subnet behind it that should also have VPN access, # use the subdirectory "ccd" for client-specific # configuration files (see man page for more info). # EXAMPLE: Suppose the client # having the certificate common name "Thelonious" # also has a small subnet behind his connecting # machine, such as 192.168.40.128/255.255.255.248. # First, uncomment out these lines: ;client-config-dir ccd ;route 192.168.40.128 255.255.255.248 # Then create a file ccd/Thelonious with this line: # iroute 192.168.40.128 255.255.255.248 # This will allow Thelonious' private subnet to # access the VPN. This example will only work # if you are routing, not bridging, i.e. you are # using "dev tun" and "server" directives. # EXAMPLE: Suppose you want to give # Thelonious a fixed VPN IP address of 10.9.0.1. # First uncomment out these lines: ;client-config-dir ccd ;route 10.9.0.0 255.255.255.252 # Then add this line to ccd/Thelonious: # ifconfig-push 10.9.0.1 10.9.0.2 # Suppose that you want to enable different # firewall access policies for different groups # of clients. There are two methods: # (1) Run multiple OpenVPN daemons, one for each # group, and firewall the TUN/TAP interface # for each group/daemon appropriately. # (2) (Advanced) Create a script to dynamically # modify the firewall in response to access # from different clients. See man # page for more info on learn-address script. ;learn-address ./script # If enabled, this directive will configure # all clients to redirect their default # network gateway through the VPN, causing # all IP traffic such as web browsing and # and DNS lookups to go through the VPN # (The OpenVPN server machine may need to NAT # or bridge the TUN/TAP interface to the internet # in order for this to work properly). ;push "redirect-gateway def1 bypass-dhcp" # Certain Windows-specific network settings # can be pushed to clients, such as DNS # or WINS server addresses. CAVEAT: # http://openvpn.net/faq.html#dhcpcaveats # The addresses below refer to the public # DNS servers provided by opendns.com. ;push "dhcp-option DNS 208.67.222.222" ;push "dhcp-option DNS 208.67.220.220" # Uncomment this directive to allow differenta # clients to be able to "see" each other. # By default, clients will only see the server. # To force clients to only see the server, you # will also need to appropriately firewall the # server's TUN/TAP interface. ;client-to-client # Uncomment this directive if multiple clients # might connect with the same certificate/key # files or common names. This is recommended # only for testing purposes. For production use, # each client should have its own certificate/key # pair. # # IF YOU HAVE NOT GENERATED INDIVIDUAL # CERTIFICATE/KEY PAIRS FOR EACH CLIENT, # EACH HAVING ITS OWN UNIQUE "COMMON NAME", # UNCOMMENT THIS LINE OUT. ;duplicate-cn # The keepalive directive causes ping-like # messages to be sent back and forth over # the link so that each side knows when # the other side has gone down. # Ping every 10 seconds, assume that remote # peer is down if no ping received during # a 120 second time period. keepalive 10 120 # For extra security beyond that provided # by SSL/TLS, create an "HMAC firewall" # to help block DoS attacks and UDP port flooding. # # Generate with: # openvpn --genkey --secret ta.key # # The server and each client must have # a copy of this key. # The second parameter should be '0' # on the server and '1' on the clients. ;tls-auth ta.key 0 # This file is secret # Select a cryptographic cipher. # This config item must be copied to # the client config file as well. ;cipher BF-CBC # Blowfish (default) ;cipher AES-128-CBC # AES ;cipher DES-EDE3-CBC # Triple-DES # Enable compression on the VPN link. # If you enable it here, you must also # enable it in the client config file. comp-lzo # The maximum number of concurrently connected # clients we want to allow. ;max-clients 100 # It's a good idea to reduce the OpenVPN # daemon's privileges after initialization. # # You can uncomment this out on # non-Windows systems. ;user nobody ;group nobody # The persist options will try to avoid # accessing certain resources on restart # that may no longer be accessible because # of the privilege downgrade. persist-key persist-tun # Output a short status file showing # current connections, truncated # and rewritten every minute. status openvpn-status.log # By default, log messages will go to the syslog (or # on Windows, if running as a service, they will go to # the "\Program Files\OpenVPN\log" directory). # Use log or log-append to override this default. # "log" will truncate the log file on OpenVPN startup, # while "log-append" will append to it. Use one # or the other (but not both). ;log openvpn.log ;log-append openvpn.log # Set the appropriate level of log # file verbosity. # # 0 is silent, except for fatal errors # 4 is reasonable for general usage # 5 and 6 can help to debug connection problems # 9 is extremely verbose verb 3 # Silence repeating messages. At most 20 # sequential messages of the same message # category will be output to the log. ;mute 20 I have changed IP's for security

  Read the article

• SSIS - Connect to Oracle on a 64-bit machine (Updated for SSIS 2008 R2)

  - by jorg

  We recently had a few customers where a connection to Oracle on a 64 bit machine was necessary. A quick search on the internet showed that this could be a big problem. I found all kind of blog and forum posts of developers complaining about this. A lot of developers will recognize the following error message: Test connection failed because of an error in initializing provider. Oracle client and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation. Provider is unable to function until these components are installed. After a lot of searching, trying and debugging I think I found the right way to do it! Problems Because BIDS is a 32 bit application, as well on 32 as on 64 bit machines, it cannot see the 64 bit driver for Oracle. Because of this, connecting to Oracle from BIDS on a 64 bit machine will never work when you install the 64 bit Oracle client. Another problem is the "Microsoft Provider for Oracle", this driver only exists in a 32 bit version and Microsoft has no plans to create a 64 bit one in the near future. The last problem I know of is in the Oracle client itself, it seems that a connection will never work with the instant client, so always use the full client. There are also a lot of problems with the 10G client, one of it is the fact that this driver can't handle the "(x86)" in the path of SQL Server. So using the 10G client is no option! Solution Download the Oracle 11G full client. Install the 32 AND the 64 bit version of the 11G full client (Installation Type: Administrator) and reboot the server afterwards. The 32 bit version is needed for development from BIDS with is 32 bit, the 64 bit version is needed for production with the SQLAgent, which is 64 bit. Configure the Oracle clients (both 32 and 64 bits) by editing  the files tnsnames.ora and sqlnet.ora. Try to do this with an Oracle DBA or, even better, let him/her do this. Use the "Oracle provider for OLE DB" from SSIS, don't use the "Microsoft Provider for Oracle" because a 64 bit version of it does not exist. Schedule your packages with the SQLAgent. Background information Visual Studio (BI Dev Studio)is a 32bit application. SQL Server Management Studio is a 32bit application. dtexecui.exe is a 32bit application. dtexec.exe has both 32bit and 64bit versions. There are x64 and x86 versions of the Oracle provider available. SQLAgent is a 64bit process. My advice to BI consultants is to get an Oracle DBA or professional for the installation and configuration of the 2 full clients (32 and 64 bit). Tell the DBA to download the biggest client available, this way you are sure that they pick the right one ;-) Testing if the clients have been installed and configured in the right way can be done with Windows ODBC Data Source Administrator: Start... Programs... Administrative tools... Data Sources (ODBC) ADITIONAL STEPS FOR SSIS 2008 R2 It seems that, unfortunately, some additional steps are necessary for SQL Server 2008 R2 installations: 1. Open REGEDIT (Start… Run… REGEDIT) on the server and search for the following entry (for the 32 bits driver): HKEY_LOCAL_MACHINE\Software\Microsoft\MSDTC\MTxOCI Make sure the following values are entered: 2. Next, search for (for the 64 bits driver): HKEY_LOCAL_MACHINE\Software\Wow6432Node\Microsoft\MSDTC\MTxOCI Make sure the same values as above are entered. 3. Reboot your server.

  Read the article

• Old School Wizardry Tip: Batch File Comments

  - by jkauffman

  Johnny, the Endangered Keyboard-Driven Windows User Some of my proudest, obscure Windows tricks are losing their relevance. I know I’m not alone. Keyboard shortcuts are going the way of the dodo. I used to induce fearful awe by slapping Ctrl+Shift+Esc in front of the lowly, pedestrian Windows users. No windows key on the keyboard? No problem: Ctrl+Esc. No menu key on the keyboard: Shift+F10. I am also firmly planted in the habit of closing windows with the Alt+Space menu (Alt+Space, C); and I harbor a brooding, slow=growing list of programs that fail to support this correctly (that means you, Paint.NET). Every time a new version of windows comes out, the support for some of these minor time-saving habits get pared out. Will I complain publicly? Nope, I know my old ways should be axed to conserve precious design energy. In fact, I disapprove of fierce un-intuitiveness for the sake of alleged productivity. Like vim, for example. If you approach a program after being away for 5 years, having to recall encyclopedic knowledge is a flaw. The RTFM disciples have lost. Anyway, some of the items in my arsenal of goofy time-saving tricks are still relevant today. I wanted to draw attention to one that’s stood the test of time. Remember Batch Files? Yes, it’s true, batch files are fading faster than the world of print. But they're not dead yet. I still run into some situations where I opt to use batch files. They are still relevant for build processes, or just various development workflow tools. Sure, there’s powershell, but there’s that stupid Set-ExecutionPolicy speed bump standing in your way; can you really spare the time to A) hunt down that setting on all machines affected and/or B) make futile efforts to convince your coworkers/boss that the hassle was worth it? When possible, I prefer the batch file wild card. And whenever I return to batch files, I end up researching some of the unintuitive aspects such as parameters, quote handling, and ERRORLEVEL. But I never have to remember to use “REM” for comment lines, because there’s a cleaner way to do them! Double Colon For Eye-Friendly Comments Here is a very simple batch file, with pretty much minimal content: @ECHO OFF SETLOCAL REM This is a comment ECHO This batch file doesn’t do much If you code on a daily basis, this may be more suitable to your eyes: @ECHO OFF SETLOCAL :: This is a comment ECHO This batch file doesn’t do much Works great! I imagine I find it preferable due to the similarity to comments in other situations: // or ;  or # I’ve often make visual pseudo-line breaks in my code, and this colon-based syntax works wonders: @ECHO OFF SETLOCAL :: Do stuff ECHO Doing Stuff :::::::::::::::::::::::::::: :: Do more stuff ECHO This batch file doesn’t do much Not only is it more readable, but there’s a slight performance benefit. The batch file engine sees this as an invalid line label and immediately reads the following line. Use that fact to your advantage if this trick leads you into heated nerd debate. Two Pitfalls to Avoid Be aware of that there are a couple situations where this hack will fail you. It most likely won’t be a problem unless you’re getting really sophisticated with your batch files. Pitfall #1: Inline comments @ECHO OFF SETLOCAL IF EXIST C:\SomeFile.txt GOTO END ::This will fail :END Unfortunately, this fails. You can only have whitespace to the left of your comments. Pitfall #2: Code Blocks @ECHO OFF SETLOCAL IF EXIST C:\SomeFile.txt (         :: This will fail         ECHO HELLO ) Code blocks, such as if statements and for loops, cannot contain these comments. This is ultimately due to the fact that entire code blocks are processed as a single line. I originally learned this from Rob van der Woude’s site. He goes into more depth about the behavior of the pitfalls as well, if you are interested in further details. I hope this trick earns you serious geek rep!

  Read the article

• Lubuntu upgrade to 13.04 killed sound with ALSA. How to troubleshoot?

  - by Sven

  After upgrading to 13.04 from 12.10 Lubuntu lost audio playback after unplugging usb soundcard (Polycom) and plugging it back in. Volume control was gray and leading to pulseaudio mixer (not installed) so I uninstalled the pulseaudio package. I also removed and reinstalled the alsa-base package. After restart I have the alsamixer back everything seemingly as usual(volume 100%, unmute) but every sound program gets me errors no matter what device I select. aplay -L: null Discard all samples (playback) or generate zero samples (capture) pulse PulseAudio Sound Server default:CARD=NVidia HDA NVidia, ALC662 rev1 Analog Default Audio Device sysdefault:CARD=NVidia HDA NVidia, ALC662 rev1 Analog Default Audio Device front:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog Front speakers surround40:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog 4.0 Surround output to Front and Rear speakers surround41:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers iec958:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Digital IEC958 (S/PDIF) Digital Audio Output hdmi:CARD=NVidia,DEV=0 HDA NVidia, HDMI 0 HDMI Audio Output dmix:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog Direct sample mixing device dmix:CARD=NVidia,DEV=1 HDA NVidia, ALC662 rev1 Digital Direct sample mixing device dmix:CARD=NVidia,DEV=3 HDA NVidia, HDMI 0 Direct sample mixing device dsnoop:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog Direct sample snooping device dsnoop:CARD=NVidia,DEV=1 HDA NVidia, ALC662 rev1 Digital Direct sample snooping device dsnoop:CARD=NVidia,DEV=3 HDA NVidia, HDMI 0 Direct sample snooping device hw:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog Direct hardware device without any conversions hw:CARD=NVidia,DEV=1 HDA NVidia, ALC662 rev1 Digital Direct hardware device without any conversions hw:CARD=NVidia,DEV=3 HDA NVidia, HDMI 0 Direct hardware device without any conversions plughw:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog Hardware device with all software conversions plughw:CARD=NVidia,DEV=1 HDA NVidia, ALC662 rev1 Digital Hardware device with all software conversions plughw:CARD=NVidia,DEV=3 HDA NVidia, HDMI 0 Hardware device with all software conversions default:CARD=Communicator Default Audio Device sysdefault:CARD=Communicator Default Audio Device front:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio Front speakers surround40:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio 4.0 Surround output to Front and Rear speakers surround41:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers iec958:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio IEC958 (S/PDIF) Digital Audio Output dmix:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio Direct sample mixing device dsnoop:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio Direct sample snooping device hw:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio Direct hardware device without any conversions plughw:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio Hardware device with all software conversions etc/asound.conf: defaults.ctl.card 1 defaults.pcm.card 1 defaults.pcm.device 1 Following gets same result with both devices. aplay -vv -D front:CARD=NVidia,DEV=0 "Release the Pressure.wav": Playing WAVE 'Release the Pressure.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Mono aplay: set_params:1087: Channels count non available Guayadeque mp3 playback: AL lib: alsa_open_playback: Could not open playback device 'default': No such file or directory 21:32:14: Error: Gstreamer error 'Configured audiosink playbackbin is not working.' Audacious: ALSA error: snd_mixer_attach failed: No such file or directory. ALSA error: snd_pcm_open failed: No such device. So How do I fix my audio? UPDATE: I removed the usb soundcard and got rid of all alsa config. Everything is working as before the install but it sure feels fragile.

  Read the article

• Dissing Architects, or "What's wrong with the coffee?"

  - by Bob Rhubart

  In my conversations with people in architect roles, tales of animosity, disrespect, and outright hostility aren't uncommon. And it's clear that in more than a few organizations architects regularly face a tough uphill climb. For architects with the requisite combination of technical, organizational, and people skills, that rough treatment is grossly undeserved. But tales of unqualified people in positions up and down the IT food chain are also easy to come by. So what's the other side of the architect story? Are some architects tarnishing the role and making life miserable for their more qualified colleagues? The various quotes included below were culled from a variety of sources. The criticism is harsh, and the people behind these quotes clearly have issues with architects. Still, whether based on mere opinion or actual experience, the comments shed some light on behaviors that should raise red flags for anyone pursuing a career as an architect. If you're an architect, and you've ever noticed that your coffee tastes like window cleaner, or your car is repeatedly keyed, or no one ever holds the elevator for you, maybe you need to do a little soul searching... Those Who Can, Code; Those Who Can't, Architect | Joe Winchester [May 18, 2007] "At the moment there seems to be an extremely unhealthy obsession in software with the concept of architecture. A colleague of mine, a recent graduate, told me he wished to become a software architect. He was drawn to the glamour of being able to come up with grandiose ideas - sweeping generalized designs, creating presentations to audiences of acronym addicts, writing esoteric academic papers, speaking at conferences attended by headless engineers on company expense accounts hungrily seeking out this year's grail, and creating e-mails with huge cc lists from people whose signature footer is more interesting than the content. I tried to re-orient him into actually doing some coding, to join a team that has a good product and keen users both of whom are pushing requirements forward, to no avail. Somehow the lure of being an architecture astronaut was too strong and I lost him to the dark side." Don't Let Architecture Astronauts Scare You | Joel Spolsky [April 21, 2001] "It's very hard to get them to write code or design programs, because they won't stop thinking about Architecture. They're astronauts because they are above the oxygen level, I don't know how they're breathing. They tend to work for really big companies that can afford to have lots of unproductive people with really advanced degrees that don't contribute to the bottom line. Remember that the architecture people are solving problems that they think they can solve, not problems which are useful to solve." Non Coding Architects Suck | Richard Henderson [May 24, 2010] "If a guy with a badge saying 'system architect' looks blank on low-level issues then he is not an architect, he is a business-analyst who went on a course. He will probably wax lyrical on all things high-level and 'important.' He will produce lovely object hierarchies without a clue to implementation. He will have a moustache and play golf." Architects Play Golf | Sunir Shah [August 15, 2012] "Often arrogant architects are difficult to get a hold of during the implementation phase because they no longer feel the need to stick around. Especially around midnight when most of the poor sob [sic] developers are still banging away. After all, they've already solved the problem--the rest is just an implementation exercise." Engineer vs Architect(Part of a discussion on the IT Architect Network Group on LinkedIn) "[An] architect spends his time producing white papers full of acronyms he does not understand but that impress his boss [while the] engineer keeps his head down and does the actual job." Architects Don't Code | [Author Unknown] "Faulty belief: System Architects don't need to code anymore. They know what they are talking about by virtue of the fact that they are System Architects."

  Read the article

• Get Pop Up Notifications for Your RSS Feeds with Feed Notifier

  - by DigitalGeekery

  Are you looking for a way to get updates from your favorite websites right to your desktop?  If so, you’ll want to check out Feed Notifier. This free Windows application runs in the system tray and delivers pop-up notifications to your desktop when your subscribed RSS feeds are updated. Download and install Feed Notifier. (Download link below) When you are finished installing, the Feed Notifier Preferences window will open. Click on the Add… button to add an RSS feed. Copy and paste the Feed URL into the text box and click Next. Choose your polling interval. This is how often your feed will be checked for new items. You can set your polling interval for days, hours, minutes, or even seconds. Click FInish. At your configured interval, Feed Notifier will check your feeds for new items. If new items are present, they will pop up above your system tray.  You’ll get an intro portion of the article. Simply Click the headline in the feed pop up… …to open the full article in your default browser. Setting Preferences Open the preferences of Feed Notifier, by going to Start > All Programs > Feed Notifier, or right clicking on the system tray icon and selecting Preferences. On the Pop-ups tab you can configure the duration in seconds that each article stays displayed on your screen. The default is five seconds. You can also change the size of the display, the theme, and the amount of content displayed.   The Options tab offers additional configurations like article caching and using a proxy server. Filter tab allows you to filter in or out certain content. To add a filter click Add…   … then type in the filter rule. You can even choose to apply it to only certain feeds. Click OK. Feed Notifier will display on the filters tab the number of times the filter is applied. Click OK when finished.   You can scroll though the articles by using the forward and back buttons at the lower left, or use the play / pause buttons to move though the articles in a slideshow-type fashion.   Feed Notifier is nice way to get your updated feeds directly to your desktop in a timely fashion. It’s supports all RSS and Atom feeds and features a clean look and feel with plenty of customizable options. Download Feed Notifier Similar Articles Productive Geek Tips Make Outlook Stop Using Internet Explorer’s RSS FeedsChange Default Feed Reader in FirefoxView Feedburner Subscriber Numbers Even if FeedCount is Not DisplayedSubscribe to RSS Feeds in Chrome with a Single ClickOrganize your RSS Feeds with FeedDemon TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Heaven & Hell Finder Icon Using TrueCrypt to Secure Your Data Quickly Schedule Meetings With NeedtoMeet Share Flickr Photos On Facebook Automatically Are You Blocked On Gtalk? Find out Discover Latest Android Apps On AppBrain

  Read the article

• Professional Developers, may I join you?

  - by Ben

  I currently work in technical support for a software/hardware company and for the most part it's a good job, but it's feeling more and more like I'm getting 'stuck' here. No raises in the 5 years I've been here, and lately there seems to be more hiring from the outside than promotion from within. The work I do is more technical than end-user support, as we deal primarily with our field technicians who have a little more technical skill than the general user base. As a result I get into much more technical support issues... often tracking down bugs in our software, finding performance bottlenecks in our database schema, etc. The work I'm most proud of are the development projects I've come up with on my own, and worked on during lunch breaks and slow periods in Support. Over the years I've written a number of useful utilities for the company. Diagnostic type applications that several departments use and appreciate. These include apps that simulate our various hardware devices, log file analysis, time-saving utilities for our work processes, etc. My best projects have been the hardware simulation programs, which are the type of thing we probably wouldn't have put a full-time developer on had anyone thought to do it, but they've ended up being popular and useful enough to be used by development, QA, R&D, and Support. They allow us to interface our software with simulated hardware, rather than clutter up our work areas with bulky, hard to acquire equipment. Since starting here my life has moved forward (married, kid, one more on the way), but it feels like my career has not. I still earn what I earned walking in the door my first day. Company budget is tight, bonuses have gone down, and no raises or cost of living / inflation adjustments either. As the sole source of income for my family I feel I need to do more, and I'd like to have a more active role in creating something at work, not just cleaning up other people's mistakes. I enjoy technical work, and I think development is the next logical step in my career. I'd like to bring some "legitimacy" to my part-time development work, and make myself a more skilled and valuable employee. Ultimately if this can help me better support my family, that would be ideal. Can I make the jump to professional developer? I have an engineering degree, but no formal education in computer science. I write WinForms apps using the .NET framework, do some freelance web development, have volunteered to write software for a nonprofit, and have started experimenting with programming microcontrollers. I enjoy learning new things in the limited free time I have available. I think I have the aptitude to take on a development role, even in an 'apprentice' capacity if such an option is possible. Have any of you moved into development like this? Do any of you developers have any advice or cautionary tales? Are there better career options I haven't thought of? I welcome any and all related comments and thank you in advance for posting them.

  Read the article

• Free RAM disappears - Memory leak?

  - by Izzy

  On a fresh started system, free reports about 1.5G used RAM (8G RAM alltogether, Ubuntu 12.04 with lightdm and plasma desktop, one konsole window started). Having the apps running I use, it still consumes not more than 2G. However, having the system running for a couple of days, more and more of my free RAM disappears -- without showing up in the list of used apps: while smem --pie=name reports less than 20% used (and 80% being available), everything else says differently. free -m for example reports on about day 7: total used free shared buffers cached Mem: 7459 7013 446 0 178 997 -/+ buffers/cache: 5836 1623 Swap: 9536 296 9240 (so you can see, it's not the buffers or the cache). Today this finally ended with the system crashing completely: the windows manager being gone, apps "hanging in the air" (frameless) -- and a popup notifying me about "too many open files". Syslog reports: kernel: [856738.020829] VFS: file-max limit 752838 reached So I closed those applications I was able to close, and killed X using Ctrl-Alt-backspace. X tried to come up again after that with failsafeX, but was unable to do so as it could no longer detect its configuration. So I switched to a console using Ctrl-Alt-F2, captured all information I could think of (vmstat, free, smem, proc/meminfo, lsof, ps aux), and finally rebooted. X again came up with failsafeX; this time I told it to "recover from my backed-up configuration", then switched to a console and successfully used startx to bring up the graphical environment. I have no real clue to what is causing this issue -- though it must have to do either with X itself, or with some user processes running on X -- as after killing X, free -m output looked like this: total used free shared buffers cached Mem: 7459 2677 4781 0 62 419 -/+ buffers/cache: 2195 5263 Swap: 9536 59 9477 (~3.5GB being freed) -- to compare with the output after a fresh start: total used free shared buffers cached Mem: 7459 1483 5975 0 63 730 -/+ buffers/cache: 689 6769 Swap: 9536 0 9536 Two more helpful outputs are provided by memstat -u. Shortly before the crash: User Count Swap USS PSS RSS mail 1 0 200 207 616 whoopsie 1 764 740 817 2300 colord 1 3200 836 894 2156 root 62 70404 352996 382260 569920 izzy 80 177508 1465416 1519266 1851840 After having X killed: User Count Swap USS PSS RSS mail 1 0 184 188 356 izzy 1 1400 708 739 1080 whoopsie 1 848 668 826 1772 colord 1 3204 804 888 1728 root 62 54876 131708 149950 267860 And after a restart, back in X: User Count Swap USS PSS RSS mail 1 0 212 217 628 whoopsie 1 0 1536 1880 5096 colord 1 0 3740 4217 7936 root 54 0 148668 180911 345132 izzy 47 0 370928 437562 915056 Edit: Just added two graphs from my monitoring system. Interesting to see: everytime when there's a "jump" in memory consumption, CPU peaks as well. Just found this right now -- and it reminds me of another indicator pointing to X itself: Often when returning to my machine and unlocking the screen, I found something doing heavvy work on my CPU. Checking with top, it always turned out to be /usr/bin/X :0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch -background none. So after this long explanation, finally my questions: What could be the possible causes? How can I better identify involved processes/applications? What steps could be taken to avoid this behaviour -- short from rebooting the machine all X days? I was running 8.04 (Hardy) for about 5 years on my old machine, never having experienced the like (always more than 100 days uptime, before rebooting for e.g. kernel updates). This now is a complete new machine with a fresh install of 8.04. In case it matters, some specs: AMD A4-3400 APU with Radeon(tm) HD Graphics, using the open-source ati/radeon driver (so no fglrx installed), 8GB RAM, WDC WD1002FAEX-0 hdd (1TB), Asus F1A75-V Evo mainboard. Ubuntu 12.04 64-bit with KDE4/Plasma. Apps usually open more or less permanently include Evolution, Firefox, konsole (with Midnight Commander running inside, about 4 tabs), and LibreOffice -- plus occasionally Calibre, Gimp and Moneyplex (banking software I'm already using for almost 20 years now, in a version which did fine on Hardy).

  Read the article

• Ubuntu + Wacom Intuos 4 + MyPaint HELP!

  - by Sativa

  Please keep in mind I'm not that computer savvy, but I will try any suggestion so please help me out! My tablet will stop working if the USB connection is ever broken, or the Ubuntu software is being updated. Sometimes it will stop working for no reason that I can see. The lights will still be on, but it won't be responsive. It doesn't work again until I restart the laptop with the tablet plugged in, which is grating if you have to do it every 25 min. or so... I'm not sure if the issue is with the port, the tablet/cable or the driver but any suggestions would be very welcome! Also, MyPaint is frequently having hiccups. It seems to save fine but at times it will randomly close down and when I open files they're often empty. They turn into 0Kb files and only contain a single empty layer. Also very grating, considering I lose days of work for no clear reason and without any heads up. Again, I'm not sure if the issue is with the port, the tablet/cable or the driver but any suggestions would be very welcome! The error message reads; Traceback (most recent call last): File "/usr/share/mypaint/gui/application.py", line 177, at_application_start(*junk=()) else: self.filehandler.open_file(fn) variables: {'fn': ('local', u'/home/maria/Desktop/Drawings/WIPs/Sativa Chibi.ora'), 'self.filehandler.open_file': ('local', <bound method FileHandler.wrapper of <gui.filehandling.FileHandler object at 0x7fdb89063a10>>)} File "/usr/share/mypaint/gui/drawwindow.py", line 60, wrapper(self=<gui.filehandling.FileHandler object>, *args=(u'/home/maria/Desktop/Drawings/WIPs/Sativa Chibi.ora',), **kwargs={}) try: func(self, *args, **kwargs) # gtk main loop may be called in here... variables: {'self': ('local', <gui.filehandling.FileHandler object at 0x7fdb89063a10>), 'args': ('local', (u'/home/maria/Desktop/Drawings/WIPs/Sativa Chibi.ora',)), 'func': ('local', <function open_file at 0x7fdb8b397b90>), 'kwargs': ('local', {})} File "/usr/share/mypaint/gui/filehandling.py", line 231, open_file(self=<gui.filehandling.FileHandler object>, filename=u'/home/maria/Desktop/Drawings/WIPs/Sativa Chibi.ora') try: self.doc.model.load(filename, feedback_cb=self.gtk_main_tick) except document.SaveLoadError, e: variables: {'self.doc.model.load': ('local', <bound method Document.load of <lib.document.Document instance at 0x7fdb8ab4f8c0>>), 'feedback_cb': (None, []), 'self.gtk_main_tick': ('local', <function gtk_main_tick at 0x7fdb8b397b18>), 'filename': ('local', u'/home/maria/Desktop/Drawings/WIPs/Sativa Chibi.ora')} File "/usr/share/mypaint/lib/document.py", line 544, load(self=<lib.document.Document instance>, filename=u'/home/maria/Desktop/Drawings/WIPs/Sativa Chibi.ora', **kwargs={'feedback_cb': <function gtk_main_tick>}) try: load(filename, **kwargs) except gobject.GError, e: variables: {'load': ('local', <bound method Document.load_ora of <lib.document.Document instance at 0x7fdb8ab4f8c0>>), 'kwargs': ('local', {'feedback_cb': <function gtk_main_tick at 0x7fdb8b397b18>}), 'filename': ('local', u'/home/maria/Desktop/Drawings/WIPs/Sativa Chibi.ora')} File "/usr/share/mypaint/lib/document.py", line 772, load_ora(self=<lib.document.Document instance>, filename=u'/home/maria/Desktop/Drawings/WIPs/Sativa Chibi.ora', feedback_cb=<function gtk_main_tick>) tempdir = tempdir.decode(sys.getfilesystemencoding()) z = zipfile.ZipFile(filename) print 'mimetype:', z.read('mimetype').strip() variables: {'zipfile.ZipFile': ('global', <class 'zipfile.ZipFile'>), 'z': (None, []), 'filename': ('local', u'/home/maria/Desktop/Drawings/WIPs/Sativa Chibi.ora')} File "/usr/lib/python2.7/zipfile.py", line 770, __init__(self=<zipfile.ZipFile object>, file=u'/home/maria/Desktop/Drawings/WIPs/Sativa Chibi.ora', mode='r', compression=0, allowZip64=False) if key == 'r': self._RealGetContents() elif key == 'w': variables: {'self._RealGetContents': ('local', <bound method ZipFile._RealGetContents of <zipfile.ZipFile object at 0x7fdb9b952790>>)} File "/usr/lib/python2.7/zipfile.py", line 811, _RealGetContents(self=<zipfile.ZipFile object>) if not endrec: raise BadZipfile, "File is not a zip file" if self.debug > 1: variables: {'BadZipfile': ('global', <class 'zipfile.BadZipfile'>)} BadZipfile: File is not a zip file

  Read the article

< Previous Page | 329 330 331 332 333 334 335 336 337 338 339 340  | Next Page >