Search Results

Search found 9730 results on 390 pages for 'restart programs'.

Page 339/390 | < Previous Page | 335 336 337 338 339 340 341 342 343 344 345 346  | Next Page >

• Compression algorithm for IEEE-754 data

  - by David Taylor

  Anyone have a recommendation on a good compression algorithm that works well with double precision floating point values? We have found that the binary representation of floating point values results in very poor compression rates with common compression programs (e.g. Zip, RAR, 7-Zip etc). The data we need to compress is a one dimensional array of 8-byte values sorted in monotonically increasing order. The values represent temperatures in Kelvin with a span typically under of 100 degrees. The number of values ranges from a few hundred to at most 64K. Clarifications All values in the array are distinct, though repetition does exist at the byte level due to the way floating point values are represented. A lossless algorithm is desired since this is scientific data. Conversion to a fixed point representation with sufficient precision (~5 decimals) might be acceptable provided there is a significant improvement in storage efficiency. Update Found an interesting article on this subject. Not sure how applicable the approach is to my requirements. http://users.ices.utexas.edu/~burtscher/papers/dcc06.pdf

  Read the article

• Strange error coming from ActiveRecord (probably)

  - by artemave

  My development environment: Ubuntu 9 Ruby 1.9.1/1.8.7 (rvm) Rails 2.3.5 Mysql 5.0 Apache Passenger Below is the part of the program flow to represent the issue. Request comes: #action def create begin @report = Report.new(params[:report]) ... rescue LocationNotFound => e ... end end Report constructor: class Report attr_accessor :locations def initialize(params = {}) @locations = params[:locations] ? fetch_locations(params[:locations]) : [] end ... end fetch_locations: def fetch_locations(loc_names) Rails.logger.debug "LOC_NAMES: " + loc_names.inspect ls = Location.find(:all, :conditions => [ # line 57 "locations.name in (#{loc_names.map{'?'}.join(',')})", *loc_names ], :include => [:sample_summaries, :samples]) # loc_names will never be empty ... end Location model: class Location < ActiveRecord::Base has_many :sample_summaries has_many :samples, :through => :sample_summaries ... end Now, the first time (after passenger restart) this runs fine and does the job. Most of the consequent times I get the error: Mar-11 11:01:00 #15098 DEBUG: LOC_NAMES: ["Moscow, RF", "London, UK"] Mar-11 11:01:00 #15098 DEBUG: Location Load (0.0ms) SELECT * FROM `locations` WHERE (locations.name in ('Moscow, RF','London, UK')) Mar-11 11:01:00 #15098 DEBUG: SampleSummary Load (0.0ms) SELECT `sample_summaries`.* FROM `sample_summaries` WHERE (`sample_summaries`.location_id IN (1,3)) Mar-11 11:01:00 #15098 DEBUG: SampleSummary Columns (0.0ms) SHOW FIELDS FROM `sample_summaries` Mar-11 11:01:00 #15098 FATAL: NoMethodError (You have a nil object when you didn't expect it! You might have expected an instance of Array. The error occurred while evaluating nil.include?): app/models/report.rb:57:in `fetch_locations' app/models/report.rb:9:in `initialize' app/controllers/report_controller.rb:11:in `new' app/controllers/report_controller.rb:11:in `create' Looks quite random to me. Any ideas? P.S. I also tried to wrap the query in uncached block, but that didn't change anything. EDIT Here is what SampleSummary model looks like: class SampleSummary < ActiveRecord::Base has_many :samples belongs_to :location ... #validations default_scope :include => :samples, :order => 'rss_ts desc' ... end

  Read the article

• configure batch to sent minute info instead of entire stdout

  - by Daniel

  Hi all, I am working on a RedHat server along with several other users. We use the batch utility to set a job queue. Some of the programs that I use write stuff to stdout during the run, with info on who much data has been processed to far and estimated time until completion etc. batch -q z at> myScript -i somefile -o someotherfile By default, the batch util send an email to me (since I configured it using .forward) with the entire output from stdout. Since the scripts writes something to stdout a few times each second, the amount of log-stuff I get from a two-day script can be ˜20 Mbs. Clearly not what I want. I can of course pipe stdout to a file like so batch -q z at> myScript -i somefile -o someotherfile > myscript.stdout.log but then I get a blank e-mail from the util. So to my question: Is it possible to configure batch so that it sends time the job started and ended, or run time or some oth valuable information to me, instead of a 20 Mb mail or a blank mail? Note that the scripts that I use are binaries and I cannot customize the code to output less info in the first place (which would be the optimal solution I guess). Thanks /Daniel

  Read the article

• Checking for corrupt war file after mvn install

  - by Tauren

  Is there a maven command that will verify that a WAR file is valid and not corrupt? Or is there some other program or technique to validate zip files? I'm on Ubuntu 9.10, so a linux solution is preferred. On occasion, I end up with a corrupt WAR file after doing mvn clean and mvn install on my project. If I extract the WAR file to my hard drive, an error occurs and the file doesn't get extracted. I believe this happens when my system is in a low-memory condition, because this tends to happen only when lots of memory is in use. After rebooting, doing a mvn install always gives a valid WAR file. Because this happens infrequently, I don't typically test the file by uncompressing it. I transfer the 50MB war file to my server and then restart Jetty with it as the root webapp. But when the file is corrupt, I get a java.util.zip.ZipException: invalid block type error. So I'm looking for a quick way to validate the file as soon as mvn install is completed. Is there a maven command to do this? Any other ideas?

  Read the article

• Problem with non blocking fifo in bash

  - by timdel

  Hi! I'm running a few Team Fortress 2 servers and I want to write a little management script. Basically the TF2 servers are a fg process which provides a server console, so I can start the server, type status and get an answer from it: ***@purple:~/tf2$ ./start_server_testing Auto detecting CPU Using AMD Optimised binary. Server will auto-restart if there is a crash. Console initialized. [bla bla bla] Connection to Steam servers successful. VAC secure mode is activated. status hostname: Team Fortress version : 1.0.6.1/15 3883 secure udp/ip : ***.***.133.31:27600 map : ctf_2fort at: 0 x, 0 y, 0 z players : 0 (2 max) # userid name uniqueid connected ping loss state adr Great, now I want to create a script which sends the command sm_reloadadmins to all my servers. The best way I found to do this is using a fifo named pipe. Now what I want to do is having this pipe readonly and non blocking to the server process, so I can write into the pipe and the server executes it, but still I want to write via console one the server, so if I switch back to the fg process of the server and I type status I want an answer printed. I tried this (assuming serverfifo is mkfifo serverfifo): ./start_server_testing < serverfifo Not working, the server won't start until something is written to the pipe. ./start_server_testing <> serverfifo Thats actually working pretty good, I can see the console output of the server and I can write to the fifo and the server executes the commands, but I can't write via console to the server anymore. Also, if I write 'exit' to the pipe (which should end the server) and I'm running it in a screen the screen window is getting killed for some reason (wtf why?). I only need the server to read the fifo without blocking AND all my keyboard input on the server itself should be send to the server AND all server ouput should be written to the console. Is that possible? If yes, how?

  Read the article

• What is the best Binary Decision Diagram library for Java?

  - by reprogrammer

  A Binary Decision Diagram (BDD) is a data structure to represent boolean functions. I'd like use this data structure in a Java program. My search for Java based BDD libraries resulted into the following packages. Java Decision Diagram Libraries JavaBDD JDD JBDD bddbddb If you know of any other BDD libraries available for Java programs, please let me know so that I add it to the list above. If you have used any of these libraries, please tell me about your experience with the library. In particular, I'd like you to compare the available libraries along the following dimensions. Quality. Is the library mature and reasonably bug free? Performance. How do you evaluate the performance of the library? Support. Could you easily get support whenever you encountered a problem with the library? Was the library well documented? Ease of use. Was the API well designed? Could you install and use the library quickly and easily? Please mention the version of the library that you are evaluating.

  Read the article

• Can't connect to local MySQL server through socket

  - by Martin

  I was trying to tune the performance of a running mysql-server by running this command: mysqld_safe --key_buffer_size=64M --table_cache=256 --sort_buffer_size=4M --read_buffer_size=1M & After this i'm unable to connect mysql from the server where mysql is running. I get this error: ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (111) However, luckily i can still connect to mysql remotely. So all my webservers still have access to mysql and are running without any problems. Because of this though i don't want to try to restart the mysql server since that will probably fuck everything up. Now i know that mysqld_safe is starting the mysql-server, and since the mysql server was already running i guess it's some kind of problem with two mysql servers running and listening to the same port. Is there some way to solve this problem without restarting the initial mysql server? UPDATE: This is what ps xa | grep "mysql" says: 11672 ? S 0:00 /bin/sh /usr/bin/mysqld_safe 11780 ? Sl 175:04 /usr/sbin/mysqld --basedir=/usr --datadir=/var/lib/mysql --user=mysql --pid-file=/var/run/mysqld/mysqld.pid --socket=/var/run/mysqld/mysqld.sock --port=3306 11781 ? S 0:00 logger -t mysqld -p daemon.error 12432 pts/0 R+ 0:00 grep mysql

  Read the article

• Scapy Installed, when i use it as module Its full of errors ???

  - by Rami Jarrar

  I installed scapy 2.xx (after get some missed modules to make it install),, then i'm trying to use it as module in my python programs,, but i cant it give me alot of errors, I download and installed some missed modules and finally i'm depressed, because this error, after hard work i got this Traceback (most recent call last): File "<pyshell#0>", line 1, in <module> from scapy.all import * File "C:\Python26\scapy\all.py", line 43, in <module> from crypto.cert import * File "C:\Python26\scapy\crypto\cert.py", line 15, in <module> from Crypto.PublicKey import * File "C:\Python26\lib\Crypto\PublicKey\RSA.py", line 34, in <module> from Crypto import Random File "C:\Python26\lib\Crypto\Random\__init__.py", line 29, in <module> import _UserFriendlyRNG File "C:\Python26\lib\Crypto\Random\_UserFriendlyRNG.py", line 36, in <module> from Crypto.Random.Fortuna import FortunaAccumulator File "C:\Python26\lib\Crypto\Random\Fortuna\FortunaAccumulator.py", line 36, in <module> import FortunaGenerator File "C:\Python26\lib\Crypto\Random\Fortuna\FortunaGenerator.py", line 32, in <module> from Crypto.Util import Counter File "C:\Python26\lib\Crypto\Util\Counter.py", line 27, in <module> import _counter ImportError: No module named _counter by do the following code: from scapy.all import * p=sr1(IP(dst=ip_dst)/ICMP()) if p: p.show() so what should i do,, is there a solution for this ???

  Read the article

• cleaning up noise in an edge detection algoritum

  - by Faken

  I recently wrote an extremely basic edge detection algorithm that works on an array of chars. The program was meant to detect the edges of blobs of a single particular value on the array and worked by simply looking left, right, up and down on the array element and checking if one of those values is not the same as the value it was currently looking at. The goal was not to produce a mathematical line but rather a set of ordered points that represented a descritized closed loop edge. The algorithm works perfectly fine, except that my data contained a bit of noise hence would randomly produce edges where there should be no edges. This in turn wreaked havoc on some of my other programs down the line. There is two types of noise that the data contains. The first type is fairly sparse and somewhat random. The second type is a semi continuous straight line on the x=y axis. I know the source of the first type of noise, its a feature of the data and there is nothing i can do about it. As for the second type, i know it's my program's fault for causing it...though i haven't a hot clue exactly what is causing it. My question is: How should I go about removing the noise completely? I know that the correct data has points that are always beside each other and is very compact and ordered (with no gaps) and is a closed loop or multiple loops. The first type of noise is usually sparse and random, that could be easily taken care of by checking if any edges is next that noise point is also counted as an edge. If not, then the point is most defiantly noise and should be removed. However, the second type of noise, where we have a semi continuous line about x=y poses more of a problem. The line is sometimes continuous for random lengths (the longest was it went half way across my entire array unbroken). It is even possible for it to intersect the actual edge. Any ideas on how to do this?

  Read the article

• Solutions for working with multiple branches in ASP.Net

  - by Corey McKinnon

  At work, we are often working on multiple branches of our product at one time. For example, right now, we have a maintenance branch, a branch with code just going to QA, and a branch for a new major initiative, that won't be merged for some time now. Our web project is set up to use IIS, so every time we switch to a different branch, we have to go in to IIS Admin and change the path on the virtual directory, then reset IIS, and sometimes even restart Visual Studio, to avoid getting build errors. Is there any way to simplify this, other than not having our web project set up as a virtual directory? I'm not sure we want to make that change at this point. What do you do to make this easier, assuming you do this? Corey @RedWolves, virtual machines would definitely work, but I'm not sure it would be any simpler, especially for some of the other developers on my team, which is partly why I'm looking for more simplicity. @Dan, we're not able to change source control providers, unfortunately. @pix0r, that's something I'll try when I get back to work. Thanks for the suggestion. @Haacked, I'll have to give that a try too, but I think we have some issues with why that won't work (I can't remember exactly why right now; this application was originally written in .Net 1.1, pre-Cassini, and I can't remember if we tried it when we upgraded to 2.0 or not). Thanks all for the responses so far.

  Read the article

• Stopping the service and the babysited application before uninstalling

  - by Viv Coco

  Hi all, I have a service MyService.exe that is babysitting my application MyApp.exe, meaning it starts the application when this one crashes or whatever. Basically when the service is stopped the application is stopped (by the service) and when the service is started the application is started by the service. In order to stop my service and by that my application when uninstalling I'm doing: <ServiceControl Id='MyServiceControl' Name='MyServiceForTest' Start='install' Stop='uninstall' Remove='uninstall'/> But when I want to uninstall everything I get the error message: "The setup must update files or services that cannot be updated while the system is running. If you choose to continue, a reboot will be required to complete the setup.". If I manually stop the service before running the uninstaller I don't get this msg as both my service and my application aren't then running anymore. In the log file I noticed that this happens in InstallValidate and I get this message b/c of MyApp.exe being running. I think what happens is: the uninstallers checks the running applications, it notices that the MyService.exe and MyApp.exe are both running, detects probably that the MyService.exe will be stopped by the uninstaller itself as instructed, but doesn't know about the MyApp.exe that this one will also be terminated once the service will be stopped so it will show the reboot-message. I can't just close MyApp.exe from uninstaller b/c the service will restart it again. How could I solve this problem so that the user won't need to reboot or to manually stop the service before doing an uninstall/upgrade? Also, I can't change MyService and MyApp code anymore so I will have to do this from the (un)installer only. TIA, Viv

  Read the article

• How to replace openSSL calls with C# code?

  - by fonix232

  Hey there again! Today I ran into a problem when I was making a new theme creator for chrome. As you may know, Chrome uses a "new" file format, called CRX, to manage it's plugins and themes. It is a basic zip file, but a bit modified: "Cr24" + derkey + signature + zipFile And here comes the problem. There are only two CRX creators, written in Ruby or Python. I don't know neither language too much (had some basic experience in Python though, but mostly with PyS60), so I would like to ask you to help me convert this python app to a C# code that doesn't depend on external programs. Also, here is the source of crxmake.py: #!/usr/bin/python # Cribbed from http://github.com/Constellation/crxmake/blob/master/lib/crxmake.rb # and http://src.chromium.org/viewvc/chrome/trunk/src/chrome/tools/extensions/chromium_extension.py?revision=14872&content-type=text/plain&pathrev=14872 # from: http://grack.com/blog/2009/11/09/packing-chrome-extensions-in-python/ import sys from array import * from subprocess import * import os import tempfile def main(argv): arg0,dir,key,output = argv # zip up the directory input = dir + ".zip" if not os.path.exists(input): os.system("cd %(dir)s; zip -r ../%(input)s . -x '.svn/*'" % locals()) else: print "'%s' already exists using it" % input # Sign the zip file with the private key in PEM format signature = Popen(["openssl", "sha1", "-sign", key, input], stdout=PIPE).stdout.read(); # Convert the PEM key to DER (and extract the public form) for inclusion in the CRX header derkey = Popen(["openssl", "rsa", "-pubout", "-inform", "PEM", "-outform", "DER", "-in", key], stdout=PIPE).stdout.read(); out=open(output, "wb"); out.write("Cr24") # Extension file magic number header = array("l"); header.append(2); # Version 2 header.append(len(derkey)); header.append(len(signature)); header.tofile(out); out.write(derkey) out.write(signature) out.write(open(input).read()) os.unlink(input) print "Done." if __name__ == '__main__': main(sys.argv) Please could you help me?

  Read the article

• Iteration speed of int vs long

  - by jqno

  I have the following two programs: long startTime = System.currentTimeMillis(); for (int i = 0; i < N; i++); long endTime = System.currentTimeMillis(); System.out.println("Elapsed time: " + (endTime - startTime) + " msecs"); and long startTime = System.currentTimeMillis(); for (long i = 0; i < N; i++); long endTime = System.currentTimeMillis(); System.out.println("Elapsed time: " + (endTime - startTime) + " msecs"); Note: the only difference is the type of the loop variable (int and long). When I run this, the first program consistently prints between 0 and 16 msecs, regardless of the value of N. The second takes a lot longer. For N == Integer.MAX_VALUE, it runs in about 1800 msecs on my machine. The run time appears to be more or less linear in N. So why is this? I suppose the JIT-compiler optimizes the int loop to death. And for good reason, because obviously it doesn't do anything. But why doesn't it do so for the long loop as well? A colleague thought we might be measuring the JIT compiler doing its work in the long loop, but since the run time seems to be linear in N, this probably isn't the case.

  Read the article

• Upgrade to Delphi 2010, or stick with Delphi 7 "forever"?

  - by tim11g

  I am an individual user of Delphi, starting back in the early Turbo Pascal days. I have quite a bit of code developed over the years, but I have never sold software commercially or used it for business. Historically, Borland supported the non-professional users with lower cost versions, but Embarcadero does not. As I consider upgrading to Delphi 2010, I am put off by the high price. Embarcadero is also trying to "encourage" upgrading by threatening to charge "new user" prices for upgrades after Dec 31st. I have several questions for the community to help me decide whether to upgrade. 1) I have read about difficulties updating existing code to support the unicode string types. I have no need for unicode strings, and I am happy with the string support in D7. Will I have to modify existing code and components just to re-compile under D2010? Or are there compiler options to allow backward compatibility if new string types are not required? 2) The main reason I'm considering upgrading is for IDE improvements, and to get access to new APIs added to Windows since 2002. Are there any Windows 7 APIs or capabilities that would be impossible to support from my programs compiled using using Delphi 7 (assuming appropriate JEDI API libraries, for example)? 3) Is there anything else about Delphi 2010 that is really compelling for someone who is primarily interested in Win32 apps, and not working with databases? I have read that D2010 is slow to load, and other versions between D7 and D2010 have had stability issues, and the help system was "broken". What is the biggest benefit to D2010?

  Read the article

• How can I disable keep-alive on ASP.NET Web Service client requests?

  - by Matthew Brindley

  I have a few web servers behind an Amazon EC2 load balancer. I'm using TCP balancing on port 80 (rather than HTTP balancing). I have a client polling a Web Service (running on all web servers) for new items every few seconds. However, the client seems to stay connected to one server and polls that same server each time. I've tried using ServicePointManager to disable KeepAlive, but that didn't change anything. The outgoing connection still had its "connection: keep-alive" HTTP header, and the server kept the TCP connection open. I've also tried adding an override of GetWebRequest to the proxy class created by VS, which inherits from SoapHttpClientProtocol, but I still see the keep-alive header. If I kill the client's process and restart, it'll connect to a new server via the load balancer, but it'll continue polling that new server forever. Is there a way to force it to connect to a random server each time? I want the load from the one client to be spread across all of the web servers. The client is written in C# (as is the server) and uses a Web Reference (not a Service Reference), which points to the load balancer.

  Read the article

• "Cannot open user default database" error with "User Instance=True"

  - by Keith

  I have a desktop application that uses Sql user instancing. This is my connection string: "Data Source=.\SqlExpress; AttachDbFilename=C:\path\file.mdf; Integrated Security=True; User Instance=True; Connect Timeout=100;" My application creates this DB, downloads a load of data into it from a web service and then does a lot of actions with it. The problem comes when I attempt to re-open the connection. I get a SqlException: "Cannot open user default database. Login failed. Login failed for user 'myDomain\myusername'." This error makes no sense in this context - I have no default database. I'm logging in to an instance created just for the current application, running separately from SqlExpress. There's no other way to connect to this DB. If I start the SqlExpress service and connect to the default instance it won't be visible. It only exists for this application. The file on disk is locked by the SqlExpress instance service running under the application. if I stop the app and restart it the connection works first time, but fails on re-opening. If I just stop the app I can delete the .mdf files and begin again, but it still crashes when I re-open the connection. As my app started the instance running as me my current user should have access to every DB in the instance. This doesn't happen for other users of the same code, which suggests that it's a SQL config issue. Does anyone have any idea what causes this and how to work around it?

  Read the article

• Altering URLs and mapping - path_prefix? - Ruby on Rails...

  - by bgadoci

  Ok, so I am working on a blog application of sorts. Thus far, it allows for a user to sign up for their own account, create posts, tags, comments, etc. I have just implemented the ability to use www.myapp.com/brandon to set @user to find by username and therefore correctly display the users information at each url. So when you go to www.myapp.com/brandon you see all Brandon's posts, tags, and comments associated with those posts, etc. Works great. I implementing this URL mapping through the routes.rb file by adding the following: map.username_link '/:username', :controller => 'posts', :action => 'index' And then just setting the @user variable in the PostController and corresponding views to find_by_username. Now the issue is this. Once at www.myapp.com/brandon when you click on a post title, it sends to myapp.com/posts/id without the username in the URL which blows up my view because nothing is being set for the @user variable. How do I tell Rails to create the link reading www.myapp.com/brandon/posts/id vs www.myapp.com/posts/id and then map that action? I am assuming this will involve some code in the view, and then adding another line in the routes.rb file, map.subdomain_link '/:username/posts/:id', :controller => 'posts', :action => 'show' and adding the @user variable to the PostController#show action, but not totally sure if this is even the right approach. UPDATE: I have been reading about :path_prefix and seems like it might be what I am looking for. I have tried to implement simply by adding map.resources :posts, :path_prefix => '/:user_username/:post_id' to the routes.rb file but not working (even after server restart). I am sure this is not correct but wanted to let you know what I have tried.

  Read the article

• How to create an SaaS Application?

  - by Andrew

  I don't know how else to say it so I'm just going to explain my ideal scenario and hopefully you can explain to me how to implement it... I'm creating an application with the Zend Framework that will be hosted with DreamHost. The application will be hosted on its own domain (i.e. example-app.com). Basically, a user should be able to sign up, get their own domain sampleuser.example-app.com or example-app.com/sampleuser which points to, what looks like their own instance of the app, which is really a single instance serving up different content based on the url. Eventually, I want my users to be able to create their own domain (like foobar.com) that points to sampleuser.example-app.com, such that visitors to foobar.com don't notice that the site is really being served up from example-app.com. I don't know how to do most of that stuff. How does this process work? Do I need to do some funky stuff with Apache or can this be done with a third party host, like DreamHost? Update: Thanks for the advice! I've decided to bite the bullet and upgrade my hosting plan to utilize wildcard subdomains. It's cheaper than I was expecting! I also found out about domain reseller programs, like opensrs.com, that have their own API. I think using one of these APIs will be the solution to my domain registration issue.

  Read the article

• Rails deployment strategies with Bundler and JRuby

  - by brad

  I have a jruby rails app and I've just started using bundler for gem dependency management. I'm interested in hearing peoples' opinions on deployment strategies. The docs say that bundle package will package your gems locally so you don't have to fetch them on the server (and I believe warbler does this by default), but I personally think (for us) this is not the way to go as our deployed code (in our case a WAR file) becomes much larger. My preference would be to mimic our MVN setup which fetches all dependencies directly on the server AFTER the code has been copied there. Here's what I'm thinking, all comments are appreciated: Step1: Build war file, copy to server Step2: Unpack war on server, fetch java dependencies with mvn Step3: use Bundler to fetch Gem deps (Where should these be placed??) * Step 3 is the step I'm a bit unclear on. Do I run bundle install with a particular target in mind?? Step4: Restart Tomcat Again my reasoning here is that I'd like to keep the dependencies separate from the code at deploy time. I'd also like to place all gem dependencies in the app itself so they are contained, rather than installing them in the app user's home directory (as, again, I believe is the default for Bundler)

  Read the article

• Java: How do you really force a GC using JVMTI's ForceGargabeCollection?

  - by WizardOfOdds

  I'm not looking for the usual "you can only hint the GC in Java using System.gc()" answers, this is not at all what this question is about. My questions is not subjective and is based on a reality: GC can be forced in Java for a fact. A lot of programs that we use daily do it: IntelliJ IDEA, NetBeans, VisualVM. They all can force GC to happen. How is it done? I take it they're all using JVMTI and more specifically the ForceGarbabeCollection (notice the "Force") but how can I try it for myself? http://java.sun.com/javase/6/docs/platform/jvmti/jvmti.html#ForceGarbageCollection Also note that this question is not about "why" I'd want to do this: the "why" may be "curiosity" or "we're writing a program similar to VisualVM", etc. The question is really "how do you force a GC using JVMTI's ForceGarbageCollection"? Does the JVM needs to be launched with any special parameters? Is any JNI required? If so, what code exactly? Does it only work on Sun VMs? Any complete and compilable example would be most welcome.

  Read the article

• How can I disable the CTRL-ALT-DEL key combination completely on XP/Vista/7?

  - by Travesty3

  I have been googling extensively to figure this out, and nobody seems to be able to give a direct answer. Let me start by saying that I'm NOT talking about requiring CTRL-ALT-DEL to enter logon information. I'm working on a golf simulator program which is used at golf centers. I need the ability to completely disable the CTRL-ALT-DEL key sequence so that the golf center customers can't get out of the program and access the computer at all. I realize there are other key combinations that need to be handled as well, we already have this entire feature working in XP, but we're going to be switching to Windows 7 soon, and CTRL-ALT-DEL is the only one that doesn't seem to work in Win7. I'd really like an all-around solution if at all possible. This same program may also be installed on a client's personal computer for an in-home golf simulator, but the computers that really need this feature (golf center computers) are provided to the golf center by us, so would the best option be to write a new shell? I don't know anything about that at all, other than others that suggest writing a new shell for kiosk mode. I'd really like a simpler option, like modifying the registry in some way. I have heard that you can remove some buttons from the menu screen that pops up, but unless I can remove pretty much all of them (including the shutdown/restart button in the bottom-right corner), this won't be enough of a solution for me. Thanks for taking the time to read this and thanks again for any help you could provide! -Travis

  Read the article

• Create a VPN with Python

  - by user213060

  I want to make a device "tunnel box" that you plug an input ethernet line, and an output ethernet line, and all the traffic that goes through it gets modified in a special way. This is similar to how a firewall, IDS, VPN, or similar boxes are connected inline in a network. I think you can just assume that I am writing a custom VPN in Python for the purpose of this question: LAN computer <--\ LAN computer <---> [LAN switch] <--> ["tunnel box"] <--> [internet modem] <--> LAN computer <--/ My question is, what is a good way to program this "tunnel box" from python? My application needs to see TCP flows at the network layer, not as individual ethernet frames. Non-TCP/IP traffic such as ICPM and other types should just be passed through. Example Twisted-like Code for my "tunnel box" tunnel appliance: from my_code import special_data_conversion_function class StreamInterceptor(twisted.Protocol): def dataReceived(self,data): data=special_data_conversion_function(data) self.outbound_connection.send(data) My initial guesses: TUN/TAP with twisted.pair.tuntap.py - Problem: This seems to only work at the ethernet frame level, not like my example? Socks proxy - Problem: Not transparent as in my diagram. Programs have to be specifically setup for it. Thanks!

  Read the article

• Boost.MultiIndex: Are there way to share object between two processes?

  - by Arman

  Hello, I have a Boost.MultiIndex big array about 10Gb. In order to reduce the reading I thought there should be a way to keep the data in the memory and another client programs will be able to read and analyse it. What is the proper way to organize it? The array looks like: struct particleID { int ID;// real ID for particle from Gadget2 file "ID" block unsigned int IDf;// postition in the file particleID(int id,const unsigned int idf):ID(id),IDf(idf){} bool operator<(const particleID& p)const { return ID<p.ID;} unsigned int getByGID()const {return (ID&0x0FFF);}; }; struct ID{}; struct IDf{}; struct IDg{}; typedef multi_index_container< particleID, indexed_by< ordered_unique< tag<IDf>, BOOST_MULTI_INDEX_MEMBER(particleID,unsigned int,IDf)>, ordered_non_unique< tag<ID>,BOOST_MULTI_INDEX_MEMBER(particleID,int,ID)>, ordered_non_unique< tag<IDg>,BOOST_MULTI_INDEX_CONST_MEM_FUN(particleID,unsigned int,getByGID)> > > particlesID_set; Any ideas are welcome. kind regards Arman.

  Read the article

• What is the relationship between Turing Machine & Modern Computer ? [closed]

  - by smwikipedia

  I heard a lot that modern computers are based on Turing machine. I just cannot build a bridge between a conceptual Turing Machine and a modern computer. Could someone help me build this bridge? Below is my current understanding. I think the computer is a big general-purpose Turing machine. Each program we write is a small specific-purpose Turing machine. The classical Turing machine do its job based on the input and its current state inside and so do our programs. Let's take a running program (a process) as an example. We know that in the process's address space, there's areas for stack, heap, and code. A classical Turing machine doesn't have the ability to remember many things, so we borrow the concept of stack from the push-down automaton. The heap and stack areas contains the state of our specific-purpose Turing machine (our program). The code area represents the logic of this small Turing machine. And various I/O devices supply input to this Turing machine.

  Read the article

• call/cc in Lua - Possible?

  - by Pessimist

  The Wikipedia article on Continuation says: "In any language which supports closures, it is possible to write programs in continuation passing style and manually implement call/cc." Either that is true and I need to know how to do it or it is not true and that statement needs to be corrected. If this is true, please show me how to implement call/cc in Lua because I can't see how. I think I'd be able to implement call/cc manually if Lua had the coroutine.clone function as explained here. If closures are not enough to implement call/cc then what else is needed? The text below is optional reading. P.S.: Lua has one-shot continuations with its coroutine table. A coroutine.clone function would allow me to clone it to call it multiple times, thus effectively making call/cc possible (unless I misunderstand call/cc). However that cloning function doesn't exist in Lua. Someone on the Lua IRC channel suggested that I use the Pluto library (it implements serialization) to marshal a coroutine, copy it and then unmarshal it and use it again. While that would probably work, I am more interested in the theoretical implementation of call/cc and in finding what is the actual minimum set of features that a language needs to have in order to allow for its manual implementation.

  Read the article

< Previous Page | 335 336 337 338 339 340 341 342 343 344 345 346  | Next Page >