Search Results

Search found 11015 results on 441 pages for 'explain plan'.

Page 334/441 | < Previous Page | 330 331 332 333 334 335 336 337 338 339 340 341  | Next Page >

• Issues resolving DNS entries for multi-homed servers

  - by I.T. Support

  This is difficult to explain, so bear with me. We have 2 domain controllers, each multi-homed to straddle 2 internal subnets, (subnet A and subnet B) and provide dns, dhcp, and ldap authentication. Both domain controllers each have 2 DNS entries. both entries have identical host names, but correspond to subnet A & subnet B respectively (example entries shown): dc1 host 192.168.8.1 dc1 host 192.168.9.1 dc2 host 192.168.8.2 dc2 host 192.168.9.2 We also have a 3rd subnet for our dmz, (subnet C) which neither domain controller has an IP address on, but our firewall/routing tables provide access to subnet A from subnet C and vice versa, but don't allow access to subnet B from subnet C. Here's my issue. How can I force/determine which dns entry is used when a server on subnet C queries either domain controller by host name? Right now it seems to randomly pick one of the two entries, swaps out the name for the IP address and that's that. The problem is if it randomly selects the entry that corresponds to the 9.x subnet B (no access from subnet C), then the server fails to resolve. If it picks the entry for the 8.x subnet A then it resolves (firewall/routing tables defined for communication between these 2 subnets) Here's what I'd like to know: What are Best Practices (if any) for dealing with DNS resolution on subnets that the DNS servers don't have a presence on? Can I control something akin to a metric value to force an order of DNS resolution when there are multiple entries for the same host name that correspond to different IP subnets? Should I even have 2 DNS HOST entries for the same name? Here's what I'd like to avoid: Making edits to the HOSTS files of servers on subnet C to force DNS resolution of the hostname to the appropriate subnet Adding NIC's to the DC's to have them straddle the DMZ as well, thus obtaining a third DNS entry that corresponds to subnet C Again, my apologies if this was too verbose / unclear. Thanks!

  Read the article

• Random Hard Freeze of Windows 7 (is Kaspersky to be blamed for this?)

  - by Christian Ivicevic

  The last few weeks I experienced a new strange behavior of my computer. Sometimes Windows 7 just freezes with no real reason at all. While listening to music for example the playback hangs and you can hear a very nasty sound. Neither mouse nor keyboard input is handled and everything is just stuck. Using Ubuntu this does not happen, so I think it is just a matter of driver issues or a Windows 7 bug. Furthermore I am really suspicious about Kaspersky (Internet Security 11) and so I let it perform a complete virus scan while no other app is running. At about 50% it happened again and I needed to restart the computer by holding the power button the bad way... A really weird thing is that playing Skyrim this happened once, however music playback did not stop. Only the framerate dropped to 0 and sometimes for a few seconds I am able to move. Therefore I am really confused as furthermore no bluescreen pops up. Memtest told me that everything seems to be alright... Can anyone explain me which data you need about my hardware and software (and which tools tools to use to gather the informatik) to be able to provide any help on my problem?

  Read the article

• Weird routing issue

  - by Joel Coel

  I'm having some weird internet problems on campus. I know it's something simple, but it's a case where I need another set of eyes. I think I can explain the problem best by posting a tracert: Tracing route to google.com [74.125.45.147] over a maximum of 30 hops: 1 3 ms 3 ms 3 ms 192.168.8.1 2 1 ms 1 ms 1 ms elissaemily-pc.york.edu [192.168.10.5] 3 2 ms 2 ms 2 ms rrcs-76-79-19-33.west.biz.rr.com [76.79.19.33] 4 31 ms 3 ms 2 ms ge-1-1-0.lnclne00-mx41.neb.rr.com [76.85.220.109] 5 20 ms 17 ms 17 ms ge-7-3-0.chcgill3-rtr1.kc.rr.com [76.85.220.137] 6 20 ms 20 ms 19 ms ae-5-0.cr0.chi30.tbone.rr.com [66.109.6.112] 7 19 ms 19 ms 24 ms ae-1-0.pr0.chi10.tbone.rr.com [66.109.6.155] 8 26 ms 24 ms 24 ms 74.125.48.109 9 23 ms 24 ms 21 ms 216.239.46.246 10 39 ms 39 ms 55 ms 209.85.242.215 11 39 ms 39 ms 39 ms 209.85.254.243 12 39 ms 40 ms 96 ms 209.85.253.145 13 39 ms 39 ms 39 ms yx-in-f147.1e100.net [74.125.45.147] Trace complete. Note the second entry in there. Not only is the host name a student's computer, but the ip address doesn't exist. Dhcp shows that host as having a different address and you can't ping any 192.168.10.5. Yet somehow it's routing packets for us (and not very well, either — things are slow right now). The basic network routing table looks like this: Destination Subnet Mask Gateway --------------------------------------- Default Route -- 10.1.1.5 (our firewall) 10.0.0.0 255.0.0.0 -- 192.168.8.0 255.255.252.0 --

  Read the article

• How to make DD-WRT router's (configured like a repeater) devices be accessible on LAN? (i.e. integrate DHCP for both routers)

  - by Annonomus Penguin

  I have a D-Link DIR-600-A1 router running DD-WRT (using the 601's firmware: except for the model number, they are near identical). It has an Atheros chip, so there is no "repeater" option. You can bypass this by setting the main radio as a client to the main router, and adding a virtual radio configured as an AP. You can then set up the credentials for connecting to the main router and allowing devices to connect to the repeater/router. I have a few devices on my network: Ethernet computers Server with Samba running WiFi devices connected to the main router I then wanted to add a repeater. I have a couple of other things on the repeater: WiFi Computer Other WiFi devices. Anyway, I wanted to connect my WiFi computer to the share on my server via Samba. However, for some reason, my router treats the main router as WAN, not another device. I've tried disabling the SPI firewall: However, that doesn't work. I've tried pinging my WiFi computer from my server. However, I can ping my server from my WiFi computer. AFAIK, they are on the same subset, just using different IPs: the main one uses 192.168.0.x and the repeater uses 192.168.1.x (starting at 100 for some reason). It seems as I need to configure my router(s) to work together for DHCP. I noticed there was a "DHCP forwarder" option, but I have no idea what that would do. A quick note: for some reason (that's beyond me) my ISP disabled the capability to bridge a WiFi to ethernet connection with the router they provide (something about PPPoE or similar...). The service rep I talked to when I was having issues after I changed ISPs said that, but they couldn't explain exactly what they were "blocking." How can I get DD-WRT to not treat the client connection as WAN and the router to recognize the devices connected to the repeater?

  Read the article

• Run Explorer in SYSTEM account on Windows Vista or 7 using Sysinternal’s psexec tool?

  - by Rob

  Has anyone been successful at launching an instance of Windows Explorer in the SYSTEM account on Windows Vista or 7? It is possible to do this on XP, but I haven't been able to get it to completely work in Vista or 7. Trying to launch Explorer as SYSTEM into session 1 (my user session) results in Explorer exiting immediately and returning an error code of 1. I can launch Explorer as SYSTEM into session 0 with the following command: psexec -i 0 -s explorer That will create an instance of explorer running as SYSTEM with a taskbar and start menu on the hidden session 0 desktop, but won't let you open a file browser window. If you switch to the hidden session 0 desktop and try to open an Explorer window from there to browse files, the following error message appears: "The server process could not be started because the configured identity is incorrect. Check the username and password." I have set the following registry key to 1 for my user account and the SYSTEM account: \Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced\SeparateProcess There has got to be a way to make this work? If it is not possible, can anyone explain why? -Rob

  Read the article

• compose-key mappings differ between gtk and qt apps

  - by intuited

  I'm noticing that there is an inconsistency in the output of one of the compose-key combos. When I type ( [Compose] . . ) under Chrome, gedit, gnome-terminal, or roxterm I get the character '?'. This is a small raised dot: $ echo -n '?' | xxd 0000000: cb99 .. When I type the same combo under konsole, yakuake, or kate, I get the character '…'. This is an ellipsis: $ echo -n '…' | xxd 0000000: e280 a6 ... This is not a font issue: if I copy-paste the characters from an app using one toolkit to an app using the other, its appearance is maintained. I use a few other combos pretty regularly and they seem to work consistently across toolkits. I think this is a pretty recent phenomenon. I upgraded from Ubuntu 8.10 to 9.10 fairly recently so this might be related. I'm not sure if this will reoccur if I restart X, and I'd rather not find out. Can someone explain how this is possible, and what I can do to resolve it? I'd like to have the ellipsis appear in all apps when that combo is entered.

  Read the article

• Windows Server 2008 SMTP & POP3 Configuration

  - by Alex Hope O'Connor

  This is the first time I have ever configured a VPS server without 3rd party applications such as Plesk control panel. I have got most functionality working in all my websites except I am very unsure as to how I can setup my email functionality on this new server. Basically I want the standard POP3 functionality, a bunch of accounts with private boxes, all able to send and receive emails using their individual usernames and passwords. My server setup is pretty simple, its a VPS with IIS & DNS Server running. What I have tried to do to setup SMTP & POP3 is adding the SMTP Server feature through the Server Manager Console (very unsure of the configuration as guides I found did not explain), I then installed a 3rd party application called Visdeno SMTP Extender as it claims to be a POP3 service providing accounting and the ability to communicate with email clients. That is as far as I have gotten as I can not seem to find too much information on the subject. So can someone please tell me how to go about configuring these services in order to provide standard SMTP & POP3 functionality? Thanks, Alex.

  Read the article

• WHS - Windows Update Failure

  - by Kyle B.

  Clicking "Update Now..." inside my EX470 control panel for Windows Update produces the following error message: "Windows Home Server updates installation can not complete. Please try again later. If the problem persists, please restart the server." I have rebooted the server numerous times, and I have also used remote desktop to connect to the machine to perform the update this way, however the browser is unable to pull up http://windowsupdate.microsoft.com. This is very strange behavior because I am able to access all other sites (gmail.com, serverfault.com, etc). Would it be possible for someone to explain to me how I can check to see what is blocking the connection of this device, which apparently has a valid internet connection, to the Microsoft Windows Update site? note #1 Using the shortcut: %SystemRoot%\system32\wupdmgr.exe does not work either. It says "Connecting to 65.55.200.155..." but nothing ever happens. This is strange because all other sites seem fine. Also, I can connect to windowsupdate.microsoft.com on my local desktop so I know this is running as well

  Read the article

• Why do I get xfs_freeze "Operation not supported" error with ec2-consistent-snapshot? Debian Squeeze w/ext4 filesystem

  - by Michael Endsley

  I'm running the following command: [root@somehost ~]# ec2-consistent-snapshot --aws-credentials-file '/some/dir/file' --mysql --mysql-socket '/var/run/mysqld/mysql.sock' --mysql-username 'backup' --mysql-password 'password' --freeze-filesystem '/dev/xvda1' vol-xxxxxx It returns this error: xfs_freeze: cannot freeze filesystem at /dev/xvda1: Operation not supported ec2-consistent-snapshot: ERROR: xfs_freeze -f /dev/xvda1: failed(256) snap-eeb66393 xfs_freeze: cannot unfreeze filesystem mounted at /dev/xvda1: Invalid argument ec2-consistent-snapshot: ERROR: xfs_freeze -u /dev/xvda1: failed(256) This is being run on Debian Squeeze with the ext4 Linux filesystem. Can anyone explain this error to me, or what might be its cause? When googling, I found information about it needing to be executed with sudo, but I'm performing the entire operation as root. I also found some posts about trying to run it after a CentOS upgrade using yum, but the situation appeared dissimilar. It's difficult to find things referring to this situation exactly. xfs_freeze is available for use on the filesystem. Is it possible that the filesystem, despite being ext4, somehow doesn't support freezing? Sorry if I've missed some bit of StackExchange etiquette with this post -- it's my first venture here!

  Read the article

• Map a domain to another subdomain - Rackspace

  - by Gorgi Rankovski

  I am using a subdomain as a parameter to an ASP.NET MVC 4 application. It's working well. Now I need to test my approach, so I have the application hosted on appharbor. It works well with subdomains here too. Our DNS registers are on Rackspace, but I have no control over it. Another guy is responsible for that. So, myapp.apphb.com can be accessed through myapp.com. Also abc.myapp.com is working as expected. I use abc as a parameter. So, now I want abc.com to be mapped in those Rackspace DNS registers to abc.myapp.com Is this possible at all? Can you explain to us how to do that? Will I have some problems with it? Anything that I should be aware of? Please have in mind that I am newbie when it comes to DNS. And no experience with Rackspace. Thanks.

  Read the article

• Active Directory Domain Services - Network Name Cannot be Found

  - by Arief

  I have really weird problem that I could not explain. I am trying to redirect all users home folder to the new server. I have copied all the files including the permissions to the new server. All I need to do is to update the user profile for home folder by changing the server name. However, I got this message when I enter the new server name: My server that serving as AD can resolve the name by ping and nslookup of the server name. The only thing that I don't understand why the MMC cannot resolve the name. I did change with the IP Address and I still get the same error message. Thank you so much for your help. UPDATE: I know what seems to be a problem, but I don't know how to fix it. The new server that will serve all Home folder is actually sitting in the cloud with different IP Address as the Domain Controller. The Domain Controller is sitting locally in the office with 10.0.0.0/24 IP Addresses. The new server that is sitting in on Data Centre is on 172.10.10.10/24 IP Addresses. The static route has been set up on both end, and the DNS as well. I believe this is the issue. Does anyone how to overcome this situation? Thank you.

  Read the article

• What open source ecommerce webshops offer #1: usability, #2: PayPal integration, and #3: ease of administration and use

  - by Jonathan Hayward

  I've spent several days trying to deploy Satchmo, in the process asking several questions about deployment (http://stackoverflow.com/questions/11277407/can-anyone-explain-this-error-message-deploying-a-satchmo-project-under-gunicorn, http://stackoverflow.com/questions/11277685/is-there-a-howto-to-fcgi-for-deploying-satchmo, and http://stackoverflow.com/questions/11278295/what-is-the-most-stable-release-of-satchmo). Django's tagline is "The web framework for perfectionists with deadlines," and Satchmo's tagline is equally forceful: "The webshop for perfectionists with deadlines." I'm looking more to set up, configure, design, etc., rather than code for this one, and I'm taking a bit of a hint that for me at least the "with deadlines" bit is something that I cannot manage. Deployment has been a time sink. So, taking a step back, I don't specifically need to edit and extend the source code; what I want are first, good usability and a clean experience for the end-user, then being easy to deploy/install/manage/maintain, and enough so that even if you're having a slow day it should at most be one day's work to install, one day's work to get running, and one day's work to rebrand as white label (for simple branding). What ecommerce webshops should I be looking at?

  Read the article

• How to fix a Postfix/MySQL/Dovecot Unknown Host Issue?

  - by thiesdiggity

  I am having an issue with one of my Postfix/Dovecot mail servers and I'm unsure how to fix the problem. I will try to explain it in detail, here it goes: I have an Ubuntu server setup using Virtual hosting with Postfix, Dovecot and MySQL. We have one domain setup as a virtual domain, for this example I am going to use mail.example.com. Under that domain we have one email address. I have another server (MS Exchange) setup using another one of my sub-domains, ex.example.com. The problem is that when I SMTP into the account on mail.example.com and try to send an email to an account on ex.example.com, I get the email returned back to us with an "unknown host" error. Now, I know that the mail.example.com server can resolve the ex.example.com domain because I can ping/dig while SSH'd into it. I can also log into Postfix via Telnet and send an email to an ex.example.com mailbox. I'm guessing that it has something to do with Postfix/Dovecot looking locally for the domain in the virtual domain list because of the tld domain (example.com)? If that's the case, how do I get Postfix/Dovecot to only look locally for the entire URL (mail.example.com) and if it doesn't find it, send it to the correct server by looking up the MX/A records (which I know exist and are setup correctly)? I have been working on this all day and any guidance would be GREATLY appreciated! Thanks for your time!

  Read the article

• How does the EFI partition work and can I boot an x86 OS with a bootx64.efi file?

  - by Ian

  I have a Thinkpad X230 laptop and I want to install Linux Mint Debian Edition along side Windows 7 on my GPT formatted SSD with the BIOS in UEFI mode. The problem is that I don't understand how EFI booting works. There seems to be an EFI partition involved with some folders and binary files in it. GRUB 2 seems to be able to make more folders in it (I followed this guide http://www.thinkwiki.org/wiki/UEFI_Firmware), but it appears that the only file that does anything is the bootx64.efi file in the /efi/boot folder of the EFI partition (I am not sure if this is always the case, but it appears to be the case for my laptop http://www.thinkwiki.org/wiki/Category:X220). Here is what I have been able to do: I can install Linux Mint Debian Edition x86 with the BIOS in BIOS mode on my SSD. I can then install grub-efi and follow the guide linked above. The problem is that I don't get a GRUB prompt when I switch the BIOS to UEFI mode. It just boots Windows. It appears that I can either boot from the SSD or something called "Windows Boot Manager". If I replace the bootx64.efi with the file created by GRUB, I can no longer boot directly from the SSD. Booting from "Windows Boot Manager" still works fine. I realize that the guide says to use x64 Linux, but Linux Mint Debian Edition x64 hangs during the install process. I am really confused. What should I do? Can anyone explain how the EFI boot partition works? Can a bootx64.efi boot an x86 OS? Should I just give up with using UEFI? I haven't been able to find very much useful information about using Debian based operating systems with UEFI. Thanks, Ian

  Read the article

• Trying to configure DNS on a Godaddy Virtual Dedicated host, Mediatemple Domain Registration [closed]

  - by dclowd9901

  A client of mine purchased VD hosting with Godaddy and a domain name with Mediatemple. I've never configured DNS from scratch, and I'm finding it very difficult to find any sort of explanation on how to go about it. As of right now, Mediatemple is pointing to the Godaddy's ns1.domaincontrol.com and ns2.domaincontrol.com nameservers. The VD hosting on Godaddy (via their Simple Control Panel) has options to "Add a new domain", which brings you through a wizard of sorts that asks you if the domain has already been registered (yes), what it is (dclowd9901.com for this example), create a system username and password for it (with checkboxes for SSH and FTP access), which level of user can administer it, and whether a mail account should be setup. When complete, it also creates a zone file. In this zone file, the Primary nameserver is ns1.dclowd9901.com; the records are as follow (where 12.23.12.34 is the presumed host): @ A 12.23.12.34 @ NS ns1 @ NS ns2 ns1 A 12.23.12.34 ns2 A 12.23.12.34 @ MX mail www A 12.23.12.34 ftp A 12.23.12.34 ssh A 12.23.12.34 mail A 12.23.12.34 If anyone can shed any light on this for me, explain to me the interactions between the registrar and the host and so on, I'd be very grateful. Thanks in advance for the help.

  Read the article

• How to increase wifi speed for laptops

  - by sagar

  Now, Let me explain the situation. I am having a query regarding Wi-Fi network. I am having PC & laptop. I requested my Wi-Fi providers that I want connection in my PC. So that - Wi-Fi provider set up an Antenna on my building Terrace - They joined a cable to pc & that Antenna. ( I think using RJ45 connector ) - The reason behind this - my does not have a built in Wi-Fi adapter. Now - almost laptops have built in Wi-Fi. Now - On terrace there is Wi-Fi with superb speed. But on my flat - Wi-fi comes with low speed. So, when ever I use internet on my pc - it has great speed - but my laptop works with low speed. The reason behind this - PC is catching wifi from terrace & laptop is catching the wifi from it's own place. Now, My question is something like this. Can we place an antenna or something like that & connect it to laptop for better wifi speed? ( I am not technical person - Please add comment for down vote - if any ) ( Please add comment for more explanation of my Problem ) Thanks in advance for sharing your knowledge. Sagar

  Read the article

• Intermittent "Lost connection to MySQL server at 'reading initial communication packet'"

  - by db2

  Our web environment consists of two servers. Web front-end. Dell PowerEdge R610, RHEL 5.5, Apache 2.2.17, php 5.2.14. Database server. Dell PowerEdge R710, Windows 2008 R2 Standard x64, MySQL 5.5.11-log x64. Normally these two work perfectly fine together. However, when I try to get them talking via a dedicated LAN on their secondary NICs (each machine has four of them), things get flaky. I have NIC #2 on both machines configured on the 172.16.1.0/24 subnet, with no gateway or DNS servers (obviously, since it's just those two systems), and I put the private IP address of each machine into the hosts file of the other. The routing tables on both machines look okay after I do this. I've tried this with both a crossover cable draped directly between the two NICs, and also via a dedicated vlan on the switch in the rack. In either case, I get intermittent connection problems. It's a fairly small percentage of connections that fail, but it's enough to cause a significant problem, and I have to switch back to the main network connection, which will contend with all the other traffic and hosts on the switch. The full error message that appears in the application log: SQLSTATE[HY000] [2013] Lost connection to MySQL server at 'reading initial communication packet', system error: 110 Am I doing something really dumb that's causing this to not work properly? Anything I can check in MySQL that would explain why it's failing to connect occasionally?

  Read the article

• What used the linux memory? Low cache, low buffer, not a VM

  - by Jason

  First of all, yes, I have read LinuxAteMyRAM, which doesn't explain my situation. # free -tm total used free shared buffers cached Mem: 48149 43948 4200 0 4 75 -/+ buffers/cache: 43868 4280 Swap: 38287 0 38287 Total: 86436 43948 42488 # As shown above, the -/+ buffers/cache: line shows indicates the used memory rate is very high. However, from output of top, I don't see any process used more than 100MB of memory. So, what used the memory? PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 28078 root 18 0 327m 92m 10m S 0 0.2 0:25.06 java 31416 root 16 0 250m 28m 20m S 0 0.1 25:54.59 ResourceMonitor 21598 root -98 0 26552 25m 8316 S 0 0.1 80:49.54 had 24580 root 16 0 24152 10m 760 S 0 0.0 1:25.87 rsyncd 4956 root 16 0 62588 10m 3132 S 0 0.0 12:36.54 vxconfigd 26703 root 16 0 139m 7120 2900 S 1 0.0 4359:39 hrmonitor 21873 root 15 0 18764 4684 2152 S 0 0.0 30:07.56 MountAgent 21883 root 15 0 13736 4280 2172 S 0 0.0 25:25.09 SybaseAgent 21878 root 15 0 18548 4172 2000 S 0 0.0 52:33.46 NICAgent 21887 root 15 0 12660 4056 2168 S 0 0.0 25:07.80 SybaseBkAgent 17798 root 25 0 10652 4048 1160 S 0 0.0 0:00.04 vxconfigbackupd This is an x86_64 machine (not a common-brand server) running x84_64 Linux, not a container in a virtual machine. Kernel (uname -a): Linux 2.6.16.60-0.99.1-smp #1 SMP Fri Oct 12 14:24:23 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux Content of /proc/meminfo: MemTotal: 49304856 kB MemFree: 4066708 kB Buffers: 35688 kB Cached: 132588 kB SwapCached: 0 kB Active: 26536644 kB Inactive: 17296272 kB HighTotal: 0 kB HighFree: 0 kB LowTotal: 49304856 kB LowFree: 4066708 kB SwapTotal: 39206624 kB SwapFree: 39206528 kB Dirty: 200 kB Writeback: 0 kB AnonPages: 249592 kB Mapped: 52712 kB Slab: 1049464 kB CommitLimit: 63859052 kB Committed_AS: 659384 kB PageTables: 3412 kB VmallocTotal: 34359738367 kB VmallocUsed: 478420 kB VmallocChunk: 34359259695 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 Hugepagesize: 2048 kB df reports no large consumption of memory from tmpfs filesystems.

  Read the article

• RSA keys - virtual hosts

  - by Bosworth99

  Pardon my noobness, but I just got started with VPS (linux) hosting; setting up passwordless ssh for multiple users has proved to be kind of a pain. Currently I'm the single user of this ubuntu 10.04 LTS VPS (linode.com). I was able to establish a single rsa passkey under my home/user/.ssh/authorized_keys location. Fine. PuTTy works as expected, and Filezilla (sftp) links up as required. I've been working on a single site that this user owns, and thats not been a problem. Now, I want to set up some other sites, and I've chosen Webmin with the VirtualMin plugin to make this work. I made another user (or, rather, virtualmin did), but I've been unable to get FileZilla to link up to this new user. Could anyone with experience here explain what the setup is supposed to look like? IE - can I use a single rsa key pair for all accounts (if, for example, I give ownership of files to the original user?). Or is it standard practice to create a separate key pair for each user, and establish a separate putty/filezilla login for each? I've spent enough time dinking around with this to be frustrated. "Sever rejected the provided key" error sucks after the fifth hour. I'm about to set up an ftp server and call it a day. Any thoughts would be most welcome -

  Read the article

• What should I do to make sure that IIS does not recycle my application?

  - by AngryHacker

  I have a WCF service app hosted in IIS. On startup, it goes and fetches a really expensive (in terms of time and cpu) resource to use as local cache. Unfortunately, IIS seems to recycle the process on a fairly regular basis. So I am trying to change the settings on the Application Pool to make sure that IIS does not recycle the application. So far, I've change the following: Limit Interval under CPU from 5 to 0. Idle Time-out under Process Model from 20 to 0. Regular Time Interval under Recycling from 1740 to 0. Will this be enough? And I have specific questions about the items I changed: What specifically does Limit Interval setting under CPU mean? Does it mean that if a certain CPU usage is exceeded, the application pool will be recycled? What exactly does "recycled" mean? Is the application completely torn down and started up again? What is the difference between "Worker Process shutdown" and "Application Pool recycling"? The documentation for the Idle Time-out under Process Model talks about shutting down the worker process. While the docs for Regular Time Interval under Recycling talk about application pool recycling. I don't quite grok the difference between the two. I thought the w3wp.exe is the worker process which runs the application pool. Can someone explain the difference to the application between the two? The reason for having IIS7 and IIS7.5 tags is because the app will run in both and hope the answers are the same between the versions. Image for reference:

  Read the article

• Looking for a comprehensive/"expert" guide to BCD parameters

  - by Stilez

  I'm interested in educating myself about BCD on Windows 8. There are many, many "walkthrough" guides" and "howtos", but I can't find any guides at typical "enthusiast" level covering what each option or argument in a BCD /ENUM dump might mean, and the principles governing how these all work together. Imagine trying to rebuild or debug BCD (including EFI/BIOS variants and recovery/hibernate/memtest sections, and perhaps multiple boot Windows/WinPE/WinRE) from scratch using just BCDedit + DiskPart, and trying to understand rather than just copy/pasting commands. That's roughly the knowledge I'm after. Example questions might be: How is a BCD /ENUM dump to be read, item by item? How do its sections work together? (A lot of guides only show a specific example rather than explaining all the all common args that can exist and what they mean, they don't actually explain how sections work together, or they assume MBR/BIOS/Vista/7 and omit info needed for EFI/GPT/Dynamic disks/8) Partitions are specified by volume letter or as a \Device\HarddiskVolumeNNN. Why does it sometimes show these items as a letter and sometimes as a GUID? What are the practical differences if any? What exactly is syntax like "ramdisk=[C:]\Images\winpe.wim,{ramdiskoptions}" saying, and how will the drive letter "C" be interpreted at runtime in a line like this? Is the drive in such a line always "C:" (most examples assume so) and if not, when wouldn't it be? Many websites state that an sdi device and path may be needed in some sections of BCD, but what is sdi and what are these args doing when they appear? How does the GUID to HDD volume/partition mapping work under EFI/GPT? So that if disks or partitions/volumes change it's clear how one can confirm from basic principles whether data shown in BCD /ENUM ALL is still correct or not. Does anyone know of a suitable reference source for this kind of raw BCD data and structures? Thanks!

  Read the article

• How do I troubleshoot a segfault in Ubuntu that occurs when typing a bogus command?

  - by Alan

  We've got a production server running Ubuntu 11.10. We're encountering segfaults that appear under various conditions. The simplest reproducible case is when we login to an ssh session as our administrative user and enter a bogus command. You'd expect the standard "command not found" error message. Instead, we get a segfault in python. The user's default shell is /bin/bash. For example: $ asdf Segmentation fault Info from /var/log/syslog: Jul 6 15:39:20 PROD001 kernel: [2155960.605695] python[7873]: segfault at 0 ip (null) sp 00007fffd030b808 error 14 in python2.7[400000+233000] Some details about the server: $ uname -a Linux PROD001 3.0.0-16-server #29-Ubuntu SMP Tue Feb 14 13:08:12 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux $ cat /etc/issue Ubuntu 11.10 \n \l Before we ask the IT department to reinstall the O.S., I'd like to understand what got us here. The system and/or this particular user's environment is suspect. Many people have touched this server over the past year, so I'm wondering if it is missing libraries, incorrectly installed packages, etc. I'm hoping that if we can understand what's going wrong in this case, it will help explain why we're getting segfaults in a couple of other scenarios. Any tips on troubleshooting this segfault will be appreciated!

  Read the article

• how does svn work with apache?

  - by ajsie

  i've got ubuntu installed with lamp. im using webdav to upload/download files to/from the ubuntu web server, after i have edited the php source files in netbeans. however, i wonder what is best practice for editing source files and committing these changes to the new website. cause if we are 2-3 developers, i guess we have to use svn. but i have never used it before so i wonder how it works. should i install it and then select the /var/www (apaches webroot) as the repository folder? then when i check in, all the changes will apply immediately? could someone please explain following steps: how to download, edit the source files, upload the files and see the new changes in the website. cause i have only worked with a local apache before, and it was only me. now there will be some more programmers so i have to set up a decent, central environment for this, and have to know how netbeans, svn, webdav and apache works all together. thanks!

  Read the article

• Server 2008 R2 DNS Lockup / Stops Resolving Internet Names

  - by Richard Maynard

  We've deployed our first 2008 R2 server on a client site which has replaced their existing 2003 DC. This server provides DNS resolution services to all client machines on that site for general internet usage. Since using the 2008 R2 DNS services we have noticed every couple of days the DNS server starts timing out when requests to certain sites are made (google is the only example I can provide at this time although it seems to be larger sites with problems rather than small - CDN compatiblity issue?). When you restart the DNS Server service then resolution returns to normal... just only for a day or so. Is anybody aware of any significant changes to the DNS server architecture or configuration out of the box in R2 that may explain this intermittent behaviour? I have already tried the fix listed here to no avail: http://weblogs.asp.net/owscott/archive/2009/09/15/windows-server-2008-r2-dns-issues.aspx The following PS command prompt info illustrates the issue: PS C:\Users\Administrator.UK> nslookup Default Server: s8209001.uk.kingdomfaith.com Address: 10.1.3.4 > www.google.com Server: s8209001.uk.kingdomfaith.com Address: 10.1.3.4 Non-authoritative answer: Name: www.l.google.com Addresses: 66.102.9.99 66.102.9.104 66.102.9.105 66.102.9.103 66.102.9.147 Aliases: www.google.com > www.google.co.uk Server: s8209001.uk.kingdomfaith.com Address: 10.1.3.4 * s8209001.uk.kingdomfaith.com can't find www.google.co.uk: Server failed

  Read the article

• Forward all traffic through an ssh tunnel

  - by Eamorr

  I hope someone can follow this and I'll explain as best I can. I'm trying to forward all traffic from port 6999 on x.x.x.224, through an ssh tunnel, and onto port 7000 on x.x.x.218. Here is some ASCII art: |browser|-----|Squid on x.x.x.224|------|ssh tunnel|------<satellite link>-----|Squid on x.x.x.218|-----|www| 3128 6999 7000 80 When I remove the ssh tunnel, everything works fine. The idea is to turn off encryption on the ssh tunnel (to save bandwidth) and turn on maximum compression (to save more bandwidth). This is because it's a satellite link. Here's the ssh tunnel I've been using: ssh -C -f -C -o CompressionLevel=9 -o Cipher=none [email protected] -L 7000:172.16.1.224:6999 -N The trouble is, I don't know how to get data from Squid on x.x.x.224 into the ssh tunnel? Am I going about this the wrong way? Should I create an ssh tunnel on x.x.x.218? I use iptables to stop squid on x.x.x.224 from reading port 80, but to feed from port 6999 instead (i.e. via the ssh tunnel). Do I need another iptables rule? Any comments greatly appreciated. Many thanks in advance,

  Read the article

< Previous Page | 330 331 332 333 334 335 336 337 338 339 340 341  | Next Page >