Search Results

Search found 8755 results on 351 pages for 'triple boot'.

Page 334/351 | < Previous Page | 330 331 332 333 334 335 336 337 338 339 340 341  | Next Page >

• Emulating a computer running MS-DOS

  - by Richard

  Writing emulators has always fascinated me. Now I want to write an emulator for an IBM PC and run MS-DOS on it (I've got the floppy image files). I have good experience in C++ and C and basic knowledge of assembler and the architecture of a CPU. I also know that there are thousands of emulators out there doing exactly what I want to do, but I'd be doing this for pure joy only. How much work do I have to expect? (If my goal is to boot DOS and create a text file with it, all emulated) What CPU should I emulate ? Where can I find documentation on how the machine code is organized and which opcodes mean what, so I can unpack and execute them correctly with my emulator? Does MS-DOS still run on the newest generations of processors? Would it theoretically be able to natively run on a 64-bit AMD Phenom 2 processor w/ a modern mainboard, HDD, RAM, etc.? What else, besides emulating the CPU, could be an important factor (in terms of difficulty)? I would only aim for outputting / inputting text to the system via the host system's console, no sound or other more advanced IO etc. Have you written an emulator yet? What was your first one for? How hard was it? Do you have any special tips for me? Thanks in advance

  Read the article

• rc.local on ubuntu on ec2 will not work

  - by Tampa

  Below are the contents of my rc.local file. When I run sudo /etc/rc.local it works fine. When I boot up and instance. I expect monit to be installed but it is not. I am at a total loss. I usually use rc.local but this is rather confunsing. #!/bin/sh -e # # rc.local # # This script is executed at the end of each multiuser runlevel. # Make sure that the script will "exit 0" on success or any other # value on error. # # In order to enable or disable this script just change the execution # bits. # # By default this script does nothing. apt-get -y install monit /etc/init.d/monit stop cd /home/ubuntu/workspace/rtbopsConfig/ git fetch git checkout origin/master rtb_ec2_boot/ec2_boot.py git checkout origin/master config/ cp /home/ubuntu/workspace/rtbopsConfig/config/monit/redis/monitrc /etc/monit/ /usr/bin/python /home/ubuntu/workspace/rtbopsConfig/rtb_ec2_boot/ec2_boot.py >> /home/ubuntu/workspace/ec2_boot.txt 2>&1 /etc/init.d/monit start chkconfig monit on exit 0

  Read the article

• Configuring WPA WiFi in Ubuntu 10.10

  - by sma

  Hello, I am trying to configure my wireless network on my laptop running Ubuntu 10.10 and am having a bit of difficulty. I am a complete Linux newb, but want to learn it, hence the reason I'm trying to set this up. Here's the vitals: It is a Gateway 600 YG2 laptop. It was previously running Windows XP, but I installed Ubuntu 10.10 in place of it (not a dual boot, I removed XP altogether). I have an old wireless card that I'm trying to resurrect. I haven't really used the card in a couple years, but it seems to still work, I just can't connect to my home's wireless network. The card is a Linksys WPC11 v2.5. When I plug it in, Ubuntu recognizes the network, but won't connect to it. My home network uses WPA encryption and the only connection type that Ubuntu's network manager is giving me is WEP and then it asks for a key -- I have no idea what that key should be. So, basically, I'm asking, is there a way I can instead connect through WPA? I've tried creating a new connection in network manager, but that won't work, it keeps falling back to the WEP connection and asking me for a key. I have tried to install the XP driver using ndiswrapper but I don't know if that's working or not. Is there a way to tell if: A) the card is working as it should B) the correct drivers are installed (again, I installed the XP one using ndiswrapper NET8180.INF, but I'm not sure what to do next) Any help would be appreciated. Thank you.

  Read the article

• Embedded Development Board

  - by ALF3130

  I'm new to the embedded development world and am looking to get my very first board. After some research, I realize that there aren't many choices with FPUs. This is important in my project as I'm going to be doing quite a bit of floating point computations. I found the Mini2440 which seems to run on the ARM920T core. This particular unit is perfect for my needs (decent price, all the right I/O ports, and a touch screen to boot) but it seems that it doesn't have an FPU. I don't know how big of a penalty I'd be paying for FP emulation, so I'm unsure of whether to pull the trigger on this one. That said: Can someone please confirm whether this product (Mini2440) has an FPU or not? My project will do image capture and analysis. Does anyone have any experience with running things like OpenMP on such platforms? Please suggest any other similar boards in the = $200 price range that have an FPU. This world is new to me. Any other advice or things I should be aware of is much appreciated.

  Read the article

• how to make custom ROMs for lesser-known Android devices (i.e., WellcoM A69)

  - by gonzobrains

  Hi, I have a WellcoM A69 Android phone I would like to start hacking. I bought it in Thailand (I think WellcoM is a Thai company). However, the docs don't explain how to get a recovery menu or anything like that. I would like to figure out how to make custom ROMs for it, because it doesn't have any Google Experience apps and I also want to change the boot screen. How can I go about doing this? If I can't do this, I want to at least be able to use the device in the Eclipse debugger. I select the debugging option under applications but the device still isn't recognized. Is this something that can be disabled by the manufacturer? In any case, I would like to re-enable it if a custom ROM can allow this. If this cannot be done at all, please at least point me in the direction of where I can start writing/building my own ROMs for the G1? I figured that would be a good starting point for learning. Thanks, Jeff

  Read the article

• Ubuntu Control Center Makes Using Ubuntu Easier

  - by Vivek

  Users who are new to Ubuntu might find it somewhat difficult to configure. Today we take a look at using Ubuntu Control Center which makes managing different aspects of the system easier. About Ubuntu Control Center A lot of utilities and software has been written to work with Ubuntu. Ubuntu Control Center is one such cool utility which makes it easy for configuring Ubuntu. The following is a brief description of Ubuntu Control Center: Ubuntu Control Center or UCC is an application inspired by Mandriva Control Center and aims to centralize and organize in a simple and intuitive form the main configuration tools for Ubuntu distribution. UCC uses all the native applications already bundled with Ubuntu, but it also utilize some third-party apps like “Hardinfo”, “Boot-up Manager”, “GuFW” and “Font-Manager”. Ubuntu Control Center Here we look at installation and use of Ubuntu Control Center in Ubuntu 10.04. First we have to satisfy some dependencies. You will need to install Font-Manager and jstest-gtk (link below)…before installing Ubuntu Control Center (UCC). Click the Install Package button. You’ll be prompted to enter in your admin password for each installation package. Installation is successful…close out of the screen. Download and install Font-Manager…again you’ll need to enter in your password to complete installation.   Once you have installed the two dependencies, you are all set to install Ubuntu Control Center (link below), double click the downloaded Ubuntu Control Center deb file to install it. Once installed you can find it under Applications \ System Tools \ UCC. Once you launch it you can start managing your system, software, hardware, and more.   You can easily control various aspects of your Ubuntu System using Ubuntu Control Center. Here we look at configuring the firewall under Network and Internet.     UCC allows easy access for configuring several aspects of your system. Once you install UCC you’ll see how easy it is to configure your Ubuntu system through an intuitive clean graphical interface. If you’re new to Ubuntu, using UCC can help you in setting up your system how you like in a user friendly way. Home Page of UCC http://code.google.com/p/ucc/ Links Download Font-Manager ManagerDownload jstest-gtkUbuntu Control Center (UCC) Similar Articles Productive Geek Tips Adding extra Repositories on UbuntuAllow Remote Control To Your Desktop On UbuntuAssign a Hotkey to Open a Terminal Window in UbuntuInstall VMware Tools on Ubuntu Edgy EftInstall Monodevelop on Ubuntu Linux TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 How to Forecast Weather, without Gadgets Outlook Tools, one stop tweaking for any Outlook version Zoofs, find the most popular tweeted YouTube videos Video preview of new Windows Live Essentials 21 Cursor Packs for XP, Vista & 7 Map the Stars with Stellarium

  Read the article

• Add New Features to WMP with Windows Media Player Plus

  - by DigitalGeekery

  Do you use Windows Media Player 11 or 12 as your default media player? Today, we’re going to show you how to add some handy new features and enhancements with the Windows Media Player Plus third party plug-in. Installation and Setup Download and install Media Player Plus! (link below). You’ll need to close out of Windows Media Player before you begin or you’ll receive the message below. The next time you open Media Player you’ll be presented with the Media Player Plus settings window. Some of the settings will be enabled by default, such as the Find as you type feature. Using Media Player Plus! Find as you type allows you to start typing a search term from anywhere in Media Player without having to be in the Search box. The search term will automatically fill in the search box and display the results.   You’ll also see Disable group headers in the Library Pane.   This setting will display library items in a continuous list similar to the functionality of Windows Media Player 10. Under User Interface you can enable displaying the currently playing artist and title in the title bar. This is enabled by default.   The Context Menu page allows you to enable context menu enhancements. The File menu enhancement allows you to add the Windows Context menu to Media Player on the library pane, list pane, or both. Right click on a Title, select File, and you’ll see the Windows Context Menu. Right-click on a title and select Tag Editor Plus. Tag Editor Plus allows you to quickly edit media tags.   The Advanced tab displays a number of tags that Media Player usually doesn’t show. Only the tags with the notepad and pencil icon are editable.   The Restore Plug-ins page allows you to configure which plug-ins should be automatically restored after a Media Player crash. The Restore Media at Startup page allows you to configure Media Player to resume playing the last playlist, track, and even whether it was playing or paused at the time the application was closed. So, if you close out in the middle of a song, it will begin playing from that point the next time you open Media Player. You can also set Media Player to rewind a certain number of seconds from where you left off. This is especially useful if you are in the middle of watching a movie. There’s also the option to have your currently playing song sent to Windows Live Messenger. You can access the settings at any time by going to Tools, Plug-in properties, and selecting Windows Media Player Plus. Windows Media Plus is a nice little free plug-in for WMP 11 and 12 that brings a lot of additional functionality to Windows Media Player. If you use Media Player 11 or WMP 12 in Windows 7 as your main player, you might want to give this a try. Download Windows Media Player Plus! Similar Articles Productive Geek Tips Install and Use the VLC Media Player on Ubuntu LinuxFixing When Windows Media Player Library Won’t Let You Add FilesMake VLC Player Look like Windows Media Player 10Make VLC Player Look like Windows Media Player 11Make Windows Media Player Automatically Open in Mini Player Mode TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 Easily Create More Bookmark Toolbars in Firefox Filevo is a Cool File Hosting & Sharing Site Get a free copy of WinUtilities Pro 2010 World Cup Schedule Boot Snooze – Reboot and then Standby or Hibernate Customize Everything Related to Dates, Times, Currency and Measurement in Windows 7

  Read the article

• OBIEE 11.1.1 - Introduction to OBIEE 11g Full Sample App

  - by user809526

  Isn't it nice to discover OBIEE 11g around a nice "How To" catalog of features? to observe OBI and Essbase relationships at work? to discover TimesTen? The OBIEE 11g Full Sample App (FSA) is a comprehensive collection of examples designed to demonstrate the latest Oracle BIEE 11g capabilities and design best practices: Enhanced visualizations as Geo-spacial maps and interactive dashboards, Action Framework,  BI Publisher, Scorecard and Strategy Management, Mobile style sheets, Semantic layer modeling, Multi-source federation, Integration with products such as Essbase, Oracle OLAP, ODM, TimesTen, ODI and more The FSA is intended to be comprehensive, it is big (see CAVEAT below). The FSA is not an Oracle product, it is a good will free deployment of OBIEE/Essbase designed to exemplify OBIEE features, infrastructure and security around the Fusion Middleware components. Its contents and code are distributed free for demonstrative purposes only. It is neither maintained nor supported by Oracle as a licensed product. The OBIEE Full Sample App is independent of the default Sample App that comes with the OBIEE product. BENEFITS The FSA helps as a demonstrator of OBIEE 11g best practices, a tutorial, an environment "Test & Scrap", a SR bench (regression, conflicts), a tuning bench, a quick ready made POC seed for projects, a security options environment, ... The FSA - Is organized around a catalog of functional features - Has been deployed over 1000 times, it should be stable RELEASE The Full Sample App (V107) is bound to OBIEE 11.1.1.5 and Essbase 11.1.2.1 (November 2011). The FSA release dates are independent of the Product GA date (OBIEE). In early December 2011, a new functional Patch (V110) is released. It is easily applied (in less than 15 mins) on top of OBIEE SampleApp 11.1.1.5 (V107). The patch (V110) includes additional functional examples:        1. Web Catalog Statistics Application: Provides detailed insight into your web catalog content, dormant catalog objects, webcat impact analysis for metadata changes and more        2. Data inflation Scripts: A set of simple SQL procedures to quickly inflate SampleApp Fact and Dimension data to millions of records in a few minutes        3. Public Content Extensions Framework: A patching framework for public examples and contributions leveraging SampleApp        4. Additional report examples (including bridge report, external chart integrations) and bug fixes DISTRIBUTION as VBox image (November 2011) The ready made VBox image is designed to run on Virtual Box. It can be converted to VMware (see another BLOG). 1/ http://www.oracle.com/technetwork/middleware/bi-foundation/obiee-samples-167534.html VBox Image Deployment Guide Sampleapp_v107_GA.ovf - VBox image key file The above http URL provides the user:password for the ftp URLs below. 2/ ftp://user:[email protected]/static/SampleAppV107/ 12 "7-zip" files Sampleapp_v107_GA_7_20.7z.001 -> .012 We recommend 7-zip file manager for unzipping (http://www.7-zip.org/). Select Unzip here option, it will create the contents under a directory named "SampleApp_10722". On Windows, it is important to download and save zip file under the root directory (e.g. C:\ or D:\) because of possible long pathnames. 3/ ftp://user:[email protected]/static/SampleAppV107/Unzipped_Version/ 4 files Sampleapp_v107_GA-disk[1234].vmdk Important note: Check the provided checksums (md5sum). Please do it! DISTRIBUTION as Installation files for existing OBI 11.1.1.5 (November 2011) http://www.oracle.com/technetwork/middleware/bi-foundation/obiee-samples-167534.html Install files Deployment Guide SampleApp_10722_1.zip - 198 MB CAVEAT Many computers have RAM chips problems that keep often silent ... until you manipulate big files. It is strongly advised you run some memory check program eg MEMTEST in GRUB boot manager. Running md5sum repeatedly onto the very same big file must be consistent [same result], else a hardware memory problem is suspected. For Virtual Box, you should most likely enable VT-X (Vanderpool) hardware virtualization in BIOS. A free disk space of 80 GB is required to perform safely the VBox image installation. A Virtual Machine of minimum 6 to 7 GB memory fits the needs of combining OBIEE and Essbase execution.

  Read the article

• Friday Fun: The Search For Wondla

  - by Asian Angel

  The best day of the week is finally here again, so it is time to have some fun while waiting to go home for the weekend. The game we have for you today takes you far into humanity’s future where you journey with Eva Nine in her quest to find other humans. Note: Today’s game comes with a double bonus! First, there is a sequel game that you can move on to once you have completed the first one. Second, there are three wallpapers available in multiple sizes for those who enjoy the characters and artwork presented in the game (see below). The Search For Wondla The object of the game is to find the differences between two similar looking images based on artwork from The Search For Wondla by Tony DiTerlizzi. Are you ready to join Eva Nine in her quest to find other humans in the future? Note: There is a version available for those who would like to play The Search For Wondla on their iPads! The first game has 28 levels of difference finding goodness for you to work through. Each level will list the minimum number of differences that you need to find to progress to the next level. If you need a hint along the way just click on the Shake or Reveal options at the bottom of the game play window. Get a level completed quickly enough and you get bonus points! There will also be differences in the images for individual levels each time you play the game, so have fun! Note: The second game has 12 levels to complete. To give you a good feel for the game we have covered the first six levels here and provided seven clues for each level (you are only required to find a minimum of five). Eva Nine viewing the holographic outdoor projections in the main hub of her living quarters… Eva Nine is in a grumpy mood as Muthr visits her at bedtime… Eva Nine in her secret hideaway visiting old “childhood friends” as she contemplates her recent survival test failure. Eva Nine viewing the entire set of floor plans for the underground sanctuary where she was born and has been growing up. Eva Nine’s escape to the surface as the underground sanctuary is attacked by the bounty hunter creature Besteel. Eva Nine on the surface for the first time in her young life. Will she be successful in her quest? There is only one way to find out! Play The Search For Wondla Part 1 Play The Search For Wondla Part 2 Bonus Content If you have enjoyed this game you can learn more about the book and download the three wallpapers shown here by visiting the link below! Note: The wallpapers come in the following sizes: 1024*768, 1280*800, 1280*1024, 1440*900, iPhone, iPhone4, and iPad (click on the Extras link at the bottom of the page). Visit the Search For Wondla Homepage Do you enjoy playing difference finding games? Then you will definitely want to have a look at another wonderful game that we have covered here: Friday Fun: Isis Latest Features How-To Geek ETC The How-To Geek Guide to Learning Photoshop, Part 8: Filters Get the Complete Android Guide eBook for Only 99 Cents [Update: Expired] Improve Digital Photography by Calibrating Your Monitor The How-To Geek Guide to Learning Photoshop, Part 7: Design and Typography How to Choose What to Back Up on Your Linux Home Server How To Harmonize Your Dual-Boot Setup for Windows and Ubuntu Hang in There Scrat! – Ice Age Wallpaper How Do You Know When You’ve Passed Geek and Headed to Nerd? On The Tip – A Lamborghini Theme for Chrome and Iron What if Wile E. Coyote and the Road Runner were Human? [Video] Peaceful Winter Cabin Wallpaper Store Tabs for Later Viewing in Opera with Tab Vault

  Read the article

• Systems Solutions at COLLABORATE12

  - by ferhat

  Want to connect with fellow Oracle users and learn more about how to maximize your Oracle software environments with Oracle Systems?   Pack your bags for Las Vegas!   COLLABORATE 12  is right around the corner! COLLABORATE 12 Conference will be held at the Mandalay Bay in Las Vegas, NV 22-26 April, 2012. This is an event designed and delivered by users just like you with sessions, interactive panel discussions and hands-on learning opportunities packed with first-hand experiences, case studies and practical “how-to” content.. This year’s event includes a number of educational sessions and demos for users interested in learning from the experts how to use Oracle Optimized Solutions to get the most out of their Oracle Technology and Application software. Oracle Optimized Solutions are proven blueprints that eliminate integration guesswork by combing best in class hardware and software components to deliver complete system architectures that are fully tested, and include documented best practices that reduce integration risks and deliver better application performance.  And because they are highly flexible by design,  Oracle Optimized Solutions   can be implemented as an end-to-end solution or easily adapted into existing environments. Follow Oracle Infrared at Twitter, Facebook, Google+, and LinkedIn  to catch the latest news, developments, announcements, and inside views from  Oracle Optimized Solutions. Please come by our Exhibition Booth #1273 to see the demos and meet 1-1 with the experts behind a number of  Oracle Optimized Solutions  including those for JD Edwards EnterpriseOne, E-Business Suite, PeopleSoft HCM, Oracle WebCenter, and Oracle Database.  Exhibitor Showcase Booth #1273 DAY TIME TITLE Monday  April 23 6:00 pm - 8:00 pm Welcome Reception in the Exhibitor Showcase Tuesday  April 24 10:15 am - 4:00 pm Exhibitor Showcase Open 1:00 pm - 2:00 pm Dedicated Exhibitor Showcase Time 5:30 pm - 7:00 pm Exhibitor Showcase Happy Hour Wednesday  April 25 10:30 am - 3:00 pm Exhibitor Showcase Open 2:15 pm -3:00 pm Afternoon Break in Exhibitor Showcase  There are also a number of deep dive, educational sessions covering deployment best practices using Oracle’s engineered systems and best-in-class hardware, operating system and virtualization technologies.  Education Sessions DAY TIME TITLE LOCATION Monday  April 23 9:45 am - 10:45 am Architecting and Implementing Backup and Recovery Solutions Surf E Tuesday  April 24 2:00 pm – 3:00 pm Oracle's High Performance Systems for JD Edwards EnterpriseOne Mandalay Bay GH 4:30 pm - 5:30 pm Virtualization Boot Camp: What's New with Oracle VM Server for x86 Mandalay Bay C 9:30 am - 10:30 am Oracle on Oracle VM - Expert Panel Mandalay Bay L Wednesday  April 25 9:30 am - 10:30 am Cloud Computing Directions: Part II Understanding Oracle's Cloud Directions South Seas E  And don’t forget the keynotes and software roadmap sessions! Keynotes and Roadmap Sessions DAY TIME TITLE LOCATION Sunday  April 22 3:20 pm – 4:20 pm Oracle’s Cloud Computing Strategy Breakers B Monday  April 23 11:00 am – 12:00 pm JD Edwards - Vision, Promises and Execution: IT'S THE WAY WE ROLL and Why it Matters! Mandalay Bay A 11:00 am – 12:00 pm PeopleSoft Executive Update and Roadmap Mandalay Bay J 1:15 pm - 2:15 pm Oracle Database - Engineered for Innovation Mandalay Bay L 2:30 pm - 3:30 pm Oracle E-Business Suite Applications Strategy and General Manager Update Mandalay Bay D Tuesday  April 24 9:15 am - 10:15 am IT at Oracle: The Art of IT Transformation to Enable Business Growth Mandalay Bay Ballroom H

  Read the article

• How to Crop Pictures in Word, Excel, and PowerPoint 2010

  - by DigitalGeekery

  When you add pictures to your Office documents you might need to crop them to remove unwanted areas, or isolate a specific part. Today we’ll take a look at how to crop images in Office 2010. Note: We will show you examples in Word, but you can crop images in Word, Excel, and PowerPoint. To insert a picture into your Office document, click the Picture button on the Insert tab. The Picture Tools format ribbon should now be active. If not, click on the image. New in Office 2010 is the ability to see the area of the photo that you are keeping in addition to what will be cropped out. On the Format tab, click Crop. Click and drag inward any of the four corners to crop from any one side. Notice you can still see the area to be cropped out is show in translucent gray. Press and hold the CTRL key while you drag a corner cropping handle inward to crop equally on all four sides. To crop equally on right and left or the top and bottom, press and hold down the CTRL key while you drag the center cropping handle on either side inward. You can further adjust the cropping area by clicking and dragging the picture behind the cropping area. To accept the current dimensions and crop the photo, press escape or click anywhere outside the cropping area. You can manually crop the image to exact dimensions. This can be done by right clicking on the image and entering the dimensions in the Width and Height boxes, or in the Size group on the Format tab.   Crop to a Shape Select your photo and click Crop from the Size group on the Format tab. Select Crop to Shape and choose any of the available shapes. You photo will be cropped into that shape. Using Fit and Fill If you wish to crop a photo but fill the shape, select Fill. When you choose this option, some edges of the picture might not display but the original picture aspect ratio is maintained. If you wish to have all of the picture fit within a shape, choose Fit. The original picture aspect ratio will be maintained.   Conclusion Users moving from previous versions of Microsoft Office are sure to appreciate the improved cropping abilities in Office 2010, especially the ability to see what will and won’t be kept when you crop a photo. Similar Articles Productive Geek Tips Import Microsoft Access Data Into ExcelEmbed an Excel Worksheet Into PowerPoint or Word 2007Add Artistic Effects to Your Pictures in Office 2010Embed True Type Fonts in Word and PowerPoint 2007 DocumentsChange The Default Color Scheme In Office 2007 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 TimeToMeet is a Simple Online Meeting Planning Tool Easily Create More Bookmark Toolbars in Firefox Filevo is a Cool File Hosting & Sharing Site Get a free copy of WinUtilities Pro 2010 World Cup Schedule Boot Snooze – Reboot and then Standby or Hibernate

  Read the article

• Add the Vista Style Sidebar Back to Windows 7

  - by Mysticgeek

  If you are moving from Vista to Windows 7, you might miss the Sidebar which was introduced in Vista. Today we take a look at a couple options for getting a Sidebar back in Windows 7. Copy Files from Vista Note: In this example we are using 32-bit versions of Vista and Windows 7. Make sure you are logged in with Administrator credentials. If you have a Vista machine running, we can copy the Windows Sidebar files over to the Windows 7 machine. On the Vista machine navigate to C:\Program Files and copy the Windows Sidebar folder and all of its contents over to a flash drive or network location. On the Windows 7 machine go to C:\Program Files and rename the Windows Sidebar folder to something like Windows Sidebar_old. Now copy the Vista Windows Sidebar folder into C:\Program Files… Now you will have both folders…Windows Sidebar and Windows Sidebar_old in your C:\Program Files folder. Right-click on the desktop and select Gadgets. There you are…the Original Vista Sidebar is back and will act as it did in Vista. Move Sidebar Gadgets Another work around if you don’t have a copy of Vista, you can simply move the Desktop Gadgets you want over to the right side of the screen and they will stay there…no dock needed. Type gadgets into the Search box in the Windows Start Menu and click on Desktop Gadgets. Then drag the included Gadgets you want over to the right side of the screen. Or click on the link to Get more gadgets online to find more. Once you have them where you want, each time you reboot they will still be in the same location. This holds true no matter where you place them on your desktop as well. Install Desktop Sidebar If you want an enhanced sidebar that includes a lot of different features, and don’t have a copy of Vista, you might want to check out Desktop Sidebar Beta (link below). This is a freeware application that works with Windows XP, Vista, and Windows 7. After installation you can access it from the Start Menu… Here is how it will look after you launch it… It includes several pre-installed panels including a clock, Media Player, Search Bar, Slideshow, Messenger, Outlook inbox, Tasks, Quick Launch, Performance…and a lot more. It is highly customizable and allows you to change skins, add various levels of transparency, and a lot more. One caveat with going with Desktop Sidebar is we didn’t find a way to add Windows Gadgets to it (though there might be a plugin for it that we’re not aware of). But there are so many options, you may not mind. However, you can still use the desktop gadgets as you normally would in Windows 7. Believe it or not, some people actually prefer the Vista style Sidebar and would like it back in Windows 7. With these options you can get the Vista Sidebar back if you have a copy of Vista, place the Gadgets on the desktop, or go the freeware route. Download Desktop Sidebar (freeware) Similar Articles Productive Geek Tips Disable Windows Sidebar in VistaHow To Repair Your Crashed or Hanging Vista SidebarApplying Themes To Your Windows Vista SidebarDisable Sidebar / Desktop Gadgets on Windows 7Put AOL Instant Messenger (AIM) In your Windows Sidebar TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 VMware Workstation 7 Acronis Online Backup Ultimate Boot CD can help when disaster strikes Windows Firewall with Advanced Security – How To Guides Sculptris 1.0, 3D Drawing app AceStock, a Tiny Desktop Quote Monitor Gmail Button Addon (Firefox) Hyperwords addon (Firefox)

  Read the article

• Why is my machine unable to mount my SMB drives ("CIFS VFS: Error connecting to socket. Aborting operation", return code -115)?

  - by downbeat

  I have a machine running Precise (12.04 x64), and I cannot mount my SMB drives (I have 3, we'll call them public, private and download). It used to work (a week or two ago) and I didn't touch fstab! The machine hosting the shares is a commercial NAS, and I'm not seeing anything that would indicate it's an issue with the NAS. I have an older machine which I updated to Precise at the same time (both fresh installed, not dist-upgrade), so should have a very similar configuration. It is not having any problems. I am not having problems on windows machines/partitions either, only one of my Precise machines. The two machines are using identical entries in fstab and identical /etc/samba/smb.conf files. I don't think I've ever changed smb.conf (has never mattered before). My fstab entries all basically look like this: //10.1.1.111/public /media/public cifs credentials=/home/downbeat/.credentials,iocharset=utf8,uid=downbeat,gid=downbeat,file_mode=0644,dir_mode=0755 0 0 Here's the dmesg output on boot: [ 51.162198] CIFS VFS: Error connecting to socket. Aborting operation [ 51.162369] CIFS VFS: cifs_mount failed w/return code = -115 [ 51.194106] CIFS VFS: Error connecting to socket. Aborting operation [ 51.194250] CIFS VFS: cifs_mount failed w/return code = -115 [ 51.198120] CIFS VFS: Error connecting to socket. Aborting operation [ 51.198243] CIFS VFS: cifs_mount failed w/return code = -115 There are no other errors I see in the dmesg output. Originally when I ran 'testparm -s', the output contained these lines ERROR: lock directory /var/run/samba does not exist ERROR: pid directory /var/run/samba does not exist Here's the samba related programs I have installed: $ dpkg --list|grep -i samba ii libpam-winbind 2:3.6.3-2ubuntu2.3 Samba nameservice and authentication integration plugins ii libwbclient0 2:3.6.3-2ubuntu2.3 Samba winbind client library ii nautilus-share 0.7.3-1ubuntu2 Nautilus extension to share folder using Samba ii python-smbc 1.0.13-0ubuntu1 Python bindings for Samba clients (libsmbclient) ii samba-common 2:3.6.3-2ubuntu2.3 common files used by both the Samba server and client ii samba-common-bin 2:3.6.3-2ubuntu2.3 common files used by both the Samba server and client ii winbind 2:3.6.3-2ubuntu2.3 Samba nameservice integration server $ dpkg --list|grep -i smb ii dmidecode 2.11-4 SMBIOS/DMI table decoder ii libsmbclient 2:3.6.3-2ubuntu2.3 shared library for communication with SMB/CIFS servers ii python-smbc 1.0.13-0ubuntu1 Python bindings for Samba clients (libsmbclient) ii smbclient 2:3.6.3-2ubuntu2.3 command-line SMB/CIFS clients for Unix ii smbfs 2:5.1-1ubuntu1 Common Internet File System utilities - compatibility package $ dpkg --list|grep -i cifs ii cifs-utils 2:5.1-1ubuntu1 Common Internet File System utilities ii libsmbclient 2:3.6.3-2ubuntu2.3 shared library for communication with SMB/CIFS servers ii smbclient 2:3.6.3-2ubuntu2.3 command-line SMB/CIFS clients for Unix I originally noticed that my other machine had "libpam-winbind" and "nautilus-share" installed and the machine with the issue did not. Installing those two packages solved my errors with 'testparm -s', but did not fix my issue. Finally, I tried to purge and reinstall these packages smbclient smbfs cifs-utils samba-common samba-common-bin Still no luck. Again, it used to work; now it doesn't. Very similarly configured machine works (but some packages are out of date on the working machine). The NAS has only one interface/IP address, nmblookup works to find it's IP from it's hostname (from the machine with the issue) and it responds to a ping. Please any help would be great. I've been searching on AskUbuntu, SuperUser, ubuntuforums and plain old search engines for a week now and it's driving me crazy!

  Read the article

• Remove Programs from the Open With Menu in Explorer

  - by Matthew Guay

  Would you like to clean up the Open with menu in Windows Explorer?  Here’s how you can remove program entries you don’t want in this menu on any version of Windows. Have you ever accidently opened an mp3 with Notepad, or a zip file with Word?  If so, you’re also likely irritated that these programs now show up in the Open with menu in Windows Explorer every time you select one of those files.  Whenever you open a file type with a particular program, Windows will add an entry for it to the Open with menu.  Usually this is helpful, but it can also clutter up the menu with wrong entries. On our computer, we have tried to open a PDF file with Word and Notepad, neither which can actually view the PDF itself.  Let’s remove these entries.  To do this, we need to remove the registry entries for these programs.  Enter regedit in your Start menu search or in the Run command to open the Registry editor. Backup your registry first just in case, so you can roll-back any changes you make if you accidently delete the wrong value.  Now, browse to the following key: HKEY_CURRENT_USER \Software \Microsoft \Windows \CurrentVersion \ Explorer \FileExts\ Here you’ll see a list of all the file extensions that are registered on your computer. Browse to the file extension you wish to edit, click the white triangle beside it to see the subfolders, and select OpenWithList.  In our test, we want to change the programs associated with PDF files, so we select the OpenWithList folder under .pdf. Notice the names of the programs under the Data column on the right.  Right-click the value for the program you don’t want to see in the Open With menu and select Delete. Click Yes at the prompt to confirm that you want to delete this value. Repeat these steps with all the programs you want to remove from this file type’s Open with menu.  You can go ahead and remove entries from other file types as well if you wish. Once you’ve removed the entries you didn’t want to see, check out the Open with menu in Explorer again.  Now it will be much more streamlined and will only show the programs you want to see. Conclusion This simple trick can help you keep your Open with menu tidy, and only show the programs you want in the list.  It can be irritating to accidently open files in programs that can’t even read them.  This trick works in all versions of Windows, including 2000, XP, Vista, and Windows 7. Similar Articles Productive Geek Tips Remove ISP Text or Corporate Branding from Internet Explorer Title BarRemove the Username From the Start Menu in XPKeep Start Menu From Closing After Opening ApplicationsRemove PartyPoker (Or Other Items) from the Internet Explorer Tools MenuUninstall, Disable, or Delete Internet Explorer 8 from Windows 7 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 VMware Workstation 7 OpenDNS Guide Google TV The iPod Revolution Ultimate Boot CD can help when disaster strikes Windows Firewall with Advanced Security – How To Guides Sculptris 1.0, 3D Drawing app

  Read the article

• Add Spell Checking to Your Favorite Windows Apps

  - by Asian Angel

  Some but not all Windows apps have built-in spell checking of some sort. If you want to add spell checking to all of your apps (or a select group) then join us as we look at tinySpell. Note: There is a paid version of this software (tinySpell+) available as well for those who want extra functionality. tinySpell in Action The installation process is simple and straightforward…as soon as you have finished installing tinySpell you will see your new “System Tray Icon”. You can see tinySpell’s “Context Menu” here. Before going any further you may want to have a look through the settings to make any desired display modifications. During our tests we found it very helpful to modify the Spelling Tip options…it will make for a much nicer and easier to read display when you have a spelling error. Clicking on the Applications… Command in the Context Menu will bring up the following window. You can really finesse how active tinySpell will be here: Create a special list of apps that tinySpell will not monitor Create a custom list of apps that tinySpell will monitor If you have any particular or unique words that you would like to add to tinySpell’s Dictionary ahead of time you can do that by clicking on the Dictionary… Command in the Context Menu. Want to check the spelling of a word ahead of time or find that you are just curious about how it is spelled? Click on Open spelling window in the Context Menu to access a special spell check window. For our example we misspelled “spelling” on purpose…notice that the word has turned red. Clicking on the Check Mark Button will open a drop-down list with suggested spellings for the word that you are inquiring about. Click on the appropriate listing if you intend to copy and paste the word. Next we moved on to Notepad. As we were typing tinySpell alerted us when we typed the word “app”. You will hear a small default system sound and see a small popup as shown here if tinySpell thinks a word has been misspelled. The System Tray Icon will also change to a yellow color. You can access the list of suggested spellings by either left clicking on the small popup or the System Tray Icon. If the word is a properly spelled “abbreviation” (or special/custom) like our word here you can select Add to dictionary. Going further in our text document we once again purposely misspelled “spelling”… Left clicking on the popup gave us access to the drop-down list of suggested spellings… And clicking on the correct spelling automatically inserted it into our document in place of the misspelled word. As you can see here tinySpell was even monitoring file names when we went to save the document. Very thorough indeed. Conclusion If your favorite app does not have built-in spell checking, then tinySpell will definitely be a welcome (and very helpful) addition to your Windows system. They offer a portable version as well so you can take it with you to any PC. Links Download tinySpell *Note: The download link is located approximately half-way down the page. Similar Articles Productive Geek Tips Quick Tip: Spell Check Firefox Text Input FieldsEdit the Windows Live Writer Custom DictionaryAccess Your Favorite Google Services in Chrome the Easy WayLaunch External Apps from FirefoxNinite Makes Installing Software Incredibly Simple TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 VMware Workstation 7 OpenDNS Guide Google TV The iPod Revolution Ultimate Boot CD can help when disaster strikes Windows Firewall with Advanced Security – How To Guides Sculptris 1.0, 3D Drawing app

  Read the article

• Clone a Hard Drive Using an Ubuntu Live CD

  - by Trevor Bekolay

  Whether you’re setting up multiple computers or doing a full backup, cloning hard drives is a common maintenance task. Don’t bother burning a new boot CD or paying for new software – you can do it easily with your Ubuntu Live CD. Not only can you do this with your Ubuntu Live CD, you can do it right out of the box – no additional software needed! The program we’ll use is called dd, and it’s included with pretty much all Linux distributions. dd is a utility used to do low-level copying – rather than working with files, it works directly on the raw data on a storage device. Note: dd gets a bad rap, because like many other Linux utilities, if misused it can be very destructive. If you’re not sure what you’re doing, you can easily wipe out an entire hard drive, in an unrecoverable way. Of course, the flip side of that is that dd is extremely powerful, and can do very complex tasks with little user effort. If you’re careful, and follow these instructions closely, you can clone your hard drive with one command. We’re going to take a small hard drive that we’ve been using and copy it to a new hard drive, which hasn’t been formatted yet. To make sure that we’re working with the right drives, we’ll open up a terminal (Applications > Accessories > Terminal) and enter in the following command sudo fdisk –l We have two small drives, /dev/sda, which has two partitions, and /dev/sdc, which is completely unformatted. We want to copy the data from /dev/sda to /dev/sdc. Note: while you can copy a smaller drive to a larger one, you can’t copy a larger drive to a smaller one with the method described below. Now the fun part: using dd. The invocation we’ll use is: sudo dd if=/dev/sda of=/dev/sdc In this case, we’re telling dd that the input file (“if”) is /dev/sda, and the output file (“of”) is /dev/sdc. If your drives are quite large, this can take some time, but in our case it took just less than a minute. If we do sudo fdisk –l again, we can see that, despite not formatting /dev/sdc at all, it now has the same partitions as /dev/sda.  Additionally, if we mount all of the partitions, we can see that all of the data on /dev/sdc is now the same as on /dev/sda. Note: you may have to restart your computer to be able to mount the newly cloned drive. And that’s it…If you exercise caution and make sure that you’re using the right drives as the input file and output file, dd isn’t anything to be scared of. Unlike other utilities, dd copies absolutely everything from one drive to another – that means that you can even recover files deleted from the original drive in the clone! Similar Articles Productive Geek Tips Reset Your Ubuntu Password Easily from the Live CDHow to Browse Without a Trace with an Ubuntu Live CDRecover Deleted Files on an NTFS Hard Drive from a Ubuntu Live CDCreate a Bootable Ubuntu 9.10 USB Flash DriveWipe, Delete, and Securely Destroy Your Hard Drive’s Data the Easy Way TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 Windows Media Player Glass Icons (icons we like) How to Forecast Weather, without Gadgets Outlook Tools, one stop tweaking for any Outlook version Zoofs, find the most popular tweeted YouTube videos Video preview of new Windows Live Essentials 21 Cursor Packs for XP, Vista & 7

  Read the article

• Xorg does not see my monitor EDID

  - by sean farley

  Below is the output from my Xorg.0. X.Org X Server 1.11.3 Release Date: 2011-12-16 [ 22.311] X Protocol Version 11, Revision 0 [ 22.311] Build Operating System: Linux 2.6.42-23-generic x86_64 Ubuntu [ 22.311] Current Operating System: Linux sean-P55-USB3 3.2.0-34-generic #53-Ubuntu SMP Thu Nov 15 10:48:16 UTC 2012 x86_64 [ 22.311] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-34-generic root=UUID=0a34603e-aee9-44d1-8982-a5a5a38c3e4d ro quiet splash [ 22.311] Build Date: 29 August 2012 12:12:33AM [ 22.311] xorg-server 2:1.11.4-0ubuntu10.8 (For technical support please see http://www.ubuntu.com/support) [ 22.311] Current version of pixman: 0.24.4 [ 22.311] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 22.311] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 22.311] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Nov 17 13:20:45 2012 [ 22.311] (==) Using config file: "/etc/X11/xorg.conf" [ 22.311] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 22.311] (==) No Layout section. Using the first Screen section. [ 22.311] (==) No screen section available. Using defaults. [ 22.311] (**) |-->Screen "Default Screen Section" (0) [ 22.311] (**) | |-->Monitor "<default monitor>" [ 22.311] (==) No device specified for screen "Default Screen Section". Using the first device section listed. [ 22.311] (**) | |-->Device "Default Device" [ 22.311] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 22.311] (==) Automatically adding devices I have searched all over, and followed lots of dead ends and unanswered questions on this issue. I need to get this monitor recognised so I can use the native resolution of 1600x1200. The Nvidia driver in Windows has no problem with this. The monitor is an old Iiyama HM204DT A. Is there a way of configuring Xorg manually to get these working? I have tried xrandr but this will not work. Output:- sean@sean-P55-USB3:~$ xrandr Screen 0: minimum 8 x 8, current 1152 x 864, maximum 16384 x 16384 DVI-I-0 connected 1152x864+0+0 (normal left inverted right x axis y axis) 0mm x 0mm 1024x768 60.0 + 1360x768 60.0 59.8 1152x864 60.0* 800x600 72.2 60.3 56.2 680x384 119.9 119.6 640x480 59.9 512x384 120.0 400x300 144.4 320x240 120.1 DVI-I-1 disconnected (normal left inverted right x axis y axis) DVI-I-2 disconnected (normal left inverted right x axis y axis) HDMI-0 disconnected (normal left inverted right x axis y axis) DVI-I-3 disconnected (normal left inverted right x axis y axis) Tried Nvidia Xorg.config: sean@sean-P55-USB3:~$ sudo nvidia-xconfig [sudo] password for sean: Using X configuration file: "/etc/X11/xorg.conf". VALIDATION ERROR: Data incomplete in file /etc/X11/xorg.conf. Device section "Default Device" must have a Driver line. Backed up file '/etc/X11/xorg.conf' as '/etc/X11/xorg.conf.nvidia-xconfig-original' Backed up file '/etc/X11/xorg.conf' as '/etc/X11/xorg.conf.backup' New X configuration file written to '/etc/X11/xorg.conf' How do I insert a driver line? This is a bit of a pain as I want to use my Vectorworks cad program in a WinXP Vbox at 1600x1200 but all virtual drives are restricted to the host screen resolution. Do i need to manually create EIDI info in Xorg? I am slightly confused about how Xorg and Nvidia relate Please help

  Read the article

• Friday Fun: Spell Blazer

  - by Asian Angel

  Are you ready for some fun and adventure after a long week back at work? This week’s game combines jewel-matching style game play with an RPG story for an awesome mix of fun and fiction. Your goal is to help a young wizard reach the magic academy in Raven as the forces of darkness are building. Spell Blazer The object of the game is to help young Kaven reach the Lightcaster Academy in Raven alive, but he will encounter many dangers along the way. Are you ready to begin the quest? As soon as you click Start Game the intro will automatically begin. If this is your first time playing the game the intro provides a nice background story for the game and what is happening in the game environment. Once you are past the intro, you will see a map of the region with your starting point in the Farmlands, various towns and the roads connecting them, along with your final destination of Raven. Notice that some of the roads are different colors…those colors indicate the “danger levels” for each part of your journey (green = good, yellow = some danger, etc.). To begin your journey click on the Town of Goose with your mouse. You will encounter your first monster part of the way towards Goose. This first round takes you through the game play process step-by-step. Once you have clicked Okay you will see the details about the monster you have just encountered. It is very important that you do not click on Fight! or Flee! until viewing and noting the types of spells that the monster is resistant to or has a weakness against. Choose your spells wisely based on the information provided about the monster. Keep in mind that the healing spell can be very useful depending on the monster you meet and your current health status. Note: Spells shown in order here are Healing, Fireball, Icebolt, & Lightning. Ready to fight! The first battle will also explain how to fight…click Okay to get started. Once the main window is in full view there are details that you need to look at. Beneath each of the combatants you will see the three attacks that each brings to the battle and at the bottom you will see their respective health points. We got lucky and had an Icebolt attack that we could utilize on the first play! Note: You can exchange two squares without making a match in order to try and line up an attack. While it happened too quickly to capture in our screenshot, there will be cool lightning bolt effects shoot out from matched up squares to the opposite combatant. You will also see the amount of damage inflicted from a particular attack on top of the avatars. Victory! Once you have won a round of combat a window will appear showing the amount of gold coins left behind by the monster. When you reach a town you will have the opportunity to stop over and rest or directly continue on with your journey. On to Halgard after a good rest! Play Spell Blazer Latest Features How-To Geek ETC How To Boot 10 Different Live CDs From 1 USB Flash Drive The 20 Best How-To Geek Linux Articles of 2010 The 50 Best How-To Geek Windows Articles of 2010 The 20 Best How-To Geek Explainer Topics for 2010 How to Disable Caps Lock Key in Windows 7 or Vista How to Use the Avira Rescue CD to Clean Your Infected PC The Deep – Awesome Use of Metal Objects as Deep Sea Creatures [Video] Convert or View Documents Online Easily with Zoho, No Account Required Build a Floor Scrubbing Robot out of Computer Fans and a Frisbee Serene Blue Windows Wallpaper for Your Desktop 2011 International Space Station Calendar Available for Download (Free) Ultimate Elimination – Lego Black Ops [Video]

  Read the article

• Installation problem Ubuntu 12.04 Crashing hardware error

  - by user93640

  I am running on Ubuntu 8.04 for quite some time without many problems. About almost a year ago or so I have been trying to upgrade to 10.04 LTS, but without any success. Each time when trying to upgrade or even newly install the installation process crashed after about an hour or so (I forgot exactly how long). Now I wanted to try Ubuntu 12.04 (not even installing, but I only selected "Try Ubuntu without installing") and I got similar errors. I did not try to install it, because of earlier experience with 10.04 when after I also lost 8.04 and had to install from scratch again (after which it worked). I get the following screen (as I am not allowed to upload photos here the text): 26.767262] [Hardware Error]: CPU 0: Machine Check Exception: 0 Bank 5: b200001804000e0f 26.767279] [Hardware Error]: TSC 0 26.767287] [Hardware Error]: PROCESSOR 0:6f6 TIME 1349017924 SOCKET 0 APIC 0 microcode 44 26.767297] [Hardware Error]: Run the above through 'mcelog --ascii' 26.767307] [Hardware Error]: CPU 1: Machine Check Exception: 0 Bank 1: b200000000000175 26.767316] [Hardware Error]: TSC 0 26.767323] [Hardware Error]: PROCESSOR 0:6f6 TIME 1349017924 SOCKET 0 APIC 1 microcode 44 26.767331] [Hardware Error]: Run the above through 'mcelog --ascii' 26.767339] [Hardware Error]: CPU 1: Machine Check Exception: 0 Bank 5: b200003000000e0f 26.767348] [Hardware Error]: TSC 0 26.767354] [Hardware Error]: PROCESSOR 0:6f6 TIME 1349017924 SOCKET 0 APIC 1 microcode 44 26.767363] [Hardware Error]: Run the above through 'mcelog --ascii' 26.767371] [Hardware Error]: CPU 1: Machine Check Exception: 4 Bank 1: b200000000000175 26.767379] [Hardware Error]: TSC 1bf231e65f 26.767386] [Hardware Error]: PROCESSOR 0:6f6 TIME 1349017951 SOCKET 0 APIC 1 microcode 44 26.767395] [Hardware Error]: Run the above through 'mcelog --ascii' 26.767403] [Hardware Error]: CPU 1: Machine Check Exception: 4 Bank 5: b200003008000e0f 26.767413] [Hardware Error]: TSC 1bf231e65f 26.767421] [Hardware Error]: PROCESSOR 0:6f6 TIME 1349017951 SOCKET 0 APIC 1 microcode 44 26.767429] [Hardware Error]: Run the above through 'mcelog --ascii' 26.767437] [Hardware Error]: CPU 0: Machine Check Exception: 5 Bank 5: b200001806000e0f 26.767447] [Hardware Error]: RIP |INEXACT| 60:<00000000c1018b5c> {mwait_idle+0x7c/0x1d0} 26.767464] [Hardware Error]: TSC 1bf231e674 26.767471] [Hardware Error]: PROCESSOR 0:6f6 TIME 1349017951 SOCKET 0 APIC 0 microcode 44 26.767480] [Hardware Error]: Run the above through 'mcelog --ascii' 26.767487] [Hardware Error]: Machine check: Processor context corrupt 26.767495] Kernel panic - not syncing: Fatal Machine check 26.767505] Pid: 579, comm: debconf-communi Tainted: G M 3.2.0.29-generic-pae #46-Ubuntu 26.767515] Call Trace: 26.767525] [<c158f812>] ? printk+0x2d/0x2f 26.767534] [<c158f6e0>] panic+0x5c/0x161 26.767542] [<c10247ef>] mce_panic.part.14+0x13f/0x170 26.767551] [<c1024872>] mce_panic+0x52/0x90 26.767558] [<c1024a18>] mce_reign+0x168/0x170 26.767565] [<c1024bb5>] mce_end+0x105/0x110 26.767572] [<c10252db>] do_machine_check+0x32b/0x4f0 26.767581] [<c1024fb0>] ? mce_log+0x120/0x120 26.767590] [<c15a5e47>] error_code+0x67/0x6c 26.767602] panic occurred, switching back to text console 26.768498] Rebooting in 30 seconds.. For information, I have also tried earlier Arch Linux. I can install it, but when I try to install a window manager (LXDE) again I got similar errors. Fedora also crashes when installing and also Mandriva did not work for me. Therefore I think something deep in the machine might be wrong. But as stated above I can (clean) install 8.04 and also 9.10 can be installed without problems. Also updates for 8.04 can be installed. My machine is dual boot with XP next to it on a different partition. My HW: Memory : 2.0 GiB; Processor 0: Intel(R) Core(TM)2 CPU 6320 @ 1.86GHz; Processor 1: Intel(R) Core(TM)2 CPU 6320 @ 1.86GHz; How can I install Ubuntu 12.04? Last option would be to completely format my machine and install everything from scratch, but even I am not sure if that would solve it in the end. Can anybody help me out?

  Read the article

• Creating and using VM Groups in VirtualBox

  - by Fat Bloke

  With VirtualBox 4.2 we introduced the Groups feature which allows you to organize and manage your guest virtual machines collectively, rather than individually. Groups are quite a powerful concept and there are a few nice features you may not have discovered yet, so here's a bit more information about groups, and how they can be used.... Creating a group Groups are just ad hoc collections of virtual machines and there are several ways of creating a group: In the VirtualBox Manager GUI: Drag one VM onto another to create a group of those 2 VMs. You can then drag and drop more VMs into that group; Select multiple VMs (using Ctrl or Shift and click) then  select the menu: Machine...Group; or   press Cmd+U (Mac), or Ctrl+U(Windows); or right-click the multiple selection and choose Group, like this: From the command line: Group membership is an attribute of the vm so you can modify the vm to belong in a group. For example, to put the vm "Ubuntu" into the group "TestGroup" run this command: VBoxManage modifyvm "Ubuntu" --groups "/TestGroup" Deleting a Group Groups can be deleted by removing a group attribute from all the VMs that constitute that group. To do this via the command-line the syntax is: VBoxManage modifyvm "Ubuntu" --groups "" In the VirtualBox Manager, this is more easily done by right-clicking on a group header and selecting "Ungroup", like this: Multiple Groups Now that we understand that Groups are just attributes of VMs, it can be seen that VMs can exist in multiple groups, for example, doing this: VBoxManage modifyvm "Ubuntu" --groups "/TestGroup","/ProjectX","/ProjectY" Results in: Or via the VirtualBox Manager, you can drag VMs while pressing the Alt key (Mac) or Ctrl (other platforms). Nested Groups Just like you can drag VMs around in the VirtualBox Manager, you can also drag whole groups around. And dropping a group within a group creates a nested group. Via the command-line, nested groups are specified using a path-like syntax, like this: VBoxManage modifyvm "Ubuntu" --groups "/TestGroup/Linux" ...which creates a sub-group and puts the VM in it. Navigating Groups In the VirtualBox Manager, Groups can be collapsed and expanded by clicking on the carat to the left in the Group Header. But you can also Enter and Leave groups too, either by using the right-arrow/left-arrow keys, or by clicking on the carat on the right hand side of the Group Header, like this: . ..leading to a view of just the Group contents. You can Leave or return to the parent in the same way. Don't worry if you are imprecise with your clicking, you can use a double click on the entire right half of the Group Header to Enter a group, and the left half to Leave a group. Double-clicking on the left half when you're at the top will roll-up or collapse the group.   Group Operations The real power of Groups is not simply in arranging them prettily in the Manager. Rather it is about performing collective operations on them, once you have grouped them appropriately. For example, let's say that you are working on a project (Project X) where you have a solution stack of: Database VM, Middleware/App VM, and  a couple of client VMs which you use to test your app. With VM Groups you can start the whole stack with one operation. Select the Group Header, and choose Start: The full list of operations that may be performed on Groups are: Start Starts from any state (boot or resume) Start VMs in headless mode (hold Shift while starting) Pause Reset Close Save state Send Shutdown signal Poweroff Discard saved state Show in filesystem Sort Conclusion Hopefully we've shown that the introduction of VM Groups not only makes Oracle VM VirtualBox pretty, but pretty powerful too.  - FB 

  Read the article

• Create Panoramic Photos with Windows Live Photo Gallery

  - by Matthew Guay

  Have you ever wanted to capture the view from a mountain or the full size of a building?  Here’s how you can stitch multiple shots together into the perfect panoramic picture for free with Windows Live Photo Gallery. Getting Started First, make sure you have Windows Live Photo Gallery installed (link below).  Live Photo Gallery is part of the Windows Live Essentials suite, you can select other programs to install along with it if you want. Make sure to uncheck setting your home page to MSN and setting your search provider as Bing if you don’t want them changed.   Now, make sure you have pictures that will work good for a panorama.  These need to be taken from the same spot, and the edges of the pictures need to overlap so the program can find where the pictures connect.  Here we have taken pictures inside a building with a cell phone camera. Make your Panorama Open Live Photo Gallery, and find the pictures you want to use in your panorama.  It will automatically index and display all of the photos in your Pictures folder or Library if you’re using Windows 7. If your pictures are saved elsewhere, add that folder to Photo Gallery.  Click File, Include a folder in the gallery, and select the correct folder at the prompt. Now select all of the pictures that you will use in your panorama.  You can easily do this by clicking the checkbox on each picture that appears when you hover over it.    Once all of the pictures are selected, click Make in the menu bar and select Create panoramic photo… Alternately, right-click on any of the pictures you’ve selected, and click Create panoramic photo… Live Photo Gallery will analyze your photos and compost them together to create a panorama.  The amount of time it takes will vary depending on the number of photos, size of the pictures, and computer speed. When it’s finished making the panorama, you’ll be prompted to enter a file name and save the picture. Your new panorama picture will open as soon as it’s saved.  Depending on your shots, the picture may have quite a bit of black space around the edges where each picture didn’t cover the exact same amount of area. To correct this, click Fix on the menu bar, and then select Crop Photo in the sidebar that opens. Select the center of the picture with the crop tool, and click Apply when you’ve got the selection you want. Live Photo Gallery automatically saves your picture changes, and you can revert back to the original picture if you wish. Now you’ve got a nice panoramic shot, trimmed and ready to print, share, and more. Conclusion Panoramic shots are great ways to capture your whole surroundings, whether it’s a sports stadium, mall, or a scenic mountain view.  They can also be a great way to capture more with low-resolution cameras. Link Download Windows Live Photo Gallery Similar Articles Productive Geek Tips Family Fun: Share Photos with Photo Gallery and Windows Live SpacesLearning Windows 7: Manage Photos with Live Photo GalleryEasily Re-Size Photos in Windows Vista or XPInstall Windows Live Essentials In Windows 7Convert Photos to Flash for Your Website TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 2010 World Cup Schedule Boot Snooze – Reboot and then Standby or Hibernate Customize Everything Related to Dates, Times, Currency and Measurement in Windows 7 Google Earth replacement Icon (Icons we like) Build Great Charts in Excel with Chart Advisor tinysong gives a shortened URL for you to post on Twitter (or anywhere)

  Read the article

• Running Multiple WebLogic and OSB Domains

  - by jeff.x.davies

  I have any number of OSB domain created on my machine at any point in time. For example, I have different domains for different version of Oracle Service Bus and Oracle SOA Suite. I also have different domains for different purposes. I have a demo domain and another domain for the projects in my blog. Starting with OSB 11g and the Apache Derby server, there is a small "gotcha" if you want to create multiple domains on a devevelopment machine. When you create a new domain for OSB 11g it will use the same database info for all databases and this will cause an error when starting the admin server of the second domain (the first domain doesn't have to be running for this error to occur). Here is an example of the error message in the server console: ####<Mar 8, 2011 2:58:48 PM PST> <Critical> <JTA> <jeff-laptop> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1299625128464> <BEA-110482> <A logging last resource failed during initialization. The server cannot boot unless all configured logging last resources (LLRs) initialize. Failing reason: weblogic.transaction.loggingresource.LoggingResourceException: java.sql.SQLException: JDBC LLR, table verify failed for table 'WL_LLR_ADMINSERVER', row 'JDBC LLR Domain//Server' record had unexpected value 'osb11gR1PS3//AdminServer' expected 'OSBCIM//AdminServer'*** ONLY the original domain and server that creates an LLR table may access it *** The solution is to create a database instance for each of your domains and this is very simple to do. After you create a domain using the Configuration Wizard, locate the wlsbjmsrpDataSource-jdbc.xml file that is found under the DOMAIN_HOME/config/jdbc directory. Near the top of the file you will see the following entry: <url>jdbc:derby://localhost:1527/osbexamples;create=true;ServerName=localhost;databaseName=osbexamples</url> You need to modify this entry with a different and unique database name. The easiest way to do this is to substiture the name of your domain. For example: <url>jdbc:derby://localhost:1527/mydomain;create=true;ServerName=localhost;databaseName=mydomain</url> will create a database named mydomain . Now, when you restart the admin server for the domain, it will create the new database for you. Do this for each domain you create on your development machine and you'll have no troubles. The process is much simpler if you are creating a domain using the Configuration Wizard. Simply name the database when you get to the Configure JDBC Component Schema step of the Configuration Wizard, select the OSB JMS Reporting Provider and set the name in the DBMS/Service field to whatever name you like, as shown in Figure 1 below. Figure 1 – Configuring the JDBC Component Schema That is all there is to it. Now you can create as many domains on your leptop or development machine as you like and not have to worry about them conflicting with each other.

  Read the article

• Fill a Flash Drive with Portable Software using Lupo PenSuite

  - by Asian Angel

  A flash drive full of portable software is helpful to have along wherever you go. The Lupo PenSuite lets you choose from three different versions to get the best fit for your everyday needs. Note: If running the full version you will need a 512 MB USB flash drive or larger. Using Lupo PenSuite The one window to watch for during the setup process is where you have the opportunity to add a specific language pack if needed. Outside of that all that you need to do is sit back and wait for the suite to be extracted. Note: Extraction times will vary based on version and extraction location. Here we browsed to our flash drive to extract it to… Once the setup process is complete locate and double click the Lupo_PenSuite.exe file. This one time window will present you the opportunity to start using the suite immediately, or go directly into the options. When the suite is active you will have a new system tray icon that operates as a start menu button. At the bottom you can monitor the remaining room on your flash drive, and use the close button to exit the suite (may display as a power button based on menu theme). A quick look at the set up inside the suite. There is a pre-configured area for organizing and storing your personal files. Prefer a classic style menu? Just select for it in the options (various tab) and enjoy a smaller streamlined look. Note: You can also change the theme for the regular menu and add a user pic. The suite provides access to your portable software and online sites. You get to enjoy the best of both as shown in the following examples. Websites will open using the suite’s portable Firefox install. VLC is ready to play your downloaded videos. The suite also has some very nice photo editing programs added in. Installing Additional Apps If one of your favorite programs is not included in the suite version, it only takes a few minutes to add it in. Go to the Additional Apps webpage, download the app(s), and extract them onto your hard-drive. Note: Link for additional apps webpage provided below. Add the extracted app(s) to the MyApps folder in the suite’s folder hierarchy. Click on ASuite in the suite’s start menu. Drag and drop the portable app’s exe file into the MyApps section in the ASuite window. Your new software’s shortcut should display as shown here. Close this window when finished. Checking the suite’s start menu will show your new software ready to be used. Conclusion If you need a good portable software collection to carry with you on a flash drive then Lupo PenSuite is definitely worth taking a look at. We tested Lupo PenSuite on XP, Vista, and Windows 7 and it works great on all three. Another popular choice is PortableApps and you can check out our Review of that too they are essentially the same thing, each is just packaged differently. Links Download Lupo PenSuite (Full, Lite, & Zero versions) *Download links approximately one-third down the page. Download Additional Apps for Lupo PenSuite Download Additional Skins for Lupo PenSuite Start Menu View Video Tutorials *Has tutorial for easy updating of entire suite. Similar Articles Productive Geek Tips Install and Run Applications from Your iPod, Flash Drive or Mp3 PlayerRebit Backup Software [Review]BitLocker To Go Encrypts Portable Flash Drives in Windows 7Create a Bootable Ubuntu USB Flash Drive the Easy WaySpeed up Your Windows Vista Computer with ReadyBoost TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 VMware Workstation 7 Google TV The iPod Revolution Ultimate Boot CD can help when disaster strikes Windows Firewall with Advanced Security – How To Guides Sculptris 1.0, 3D Drawing app AceStock, a Tiny Desktop Quote Monitor

  Read the article

• Stay on Schedule in Chrome with DayHiker

  - by Matthew Guay

  Do you keep your schedule and tasks in Google Calendar?  Here’s a handy extension for Google Chrome that can keep you on top of your appointments without having to open Google Calendar in another tab. Integrate Google Calendar with Chrome DayHiker is a handy extension for Google Chrome that can help you stay on schedule in your browser.  Desktop applications typically can keep you notified easier with popups or alerts, but webapps require you to visit them to view your information.  DayHiker takes the best of both, and can make your Google Calendar work more like a desktop application. To get started, open the DayHiker page from the Chrome Extensions Gallery (link below), and click Install.  Confirm you wish to install it at the prompt. Now you’ll have a new extension button in your Chrome toolbar.  Click the calendar icon to view your Google Calendar.  You’ll need to be signed into your Google account for your calendar to display; click the key icon to select your account if it doesn’t show your appointments automatically. If you’re signed into multiple Google accounts, such as your public Gmail and a Google Apps account, you can select the calendar you wish and click Continue. Now you can quickly see your upcoming appointments.  Simply hover over the icon to see your upcoming events.  Or, just glance at it to see if there are any appointments coming up, as the indicator icon will change colors to show how long you have until your next appointment. Click the icon to see more information about your appointments. Or, click the Add link to add a new appointment.  If you need to edit the appointment details, click Edit Details and the appointment will open in Google Calendar for you to edit. You can also view and manage your tasks in Google Calendar.  Click the checkmark icon, and then add or check-off tasks directly from the extension pane. You can also set an alarm clock in DayHiker.  Click the green circle icon, and then enter the time for the alarm to go off.  Strangely it will only chime if the extension pane is left open, so if you click anywhere else in the browser or even switch to another program it will not chime.   If you’d like to customize DayHiker’s settings, right-click on it and select Options, or select Options in the Chrome Extensions page.  Here you can customize your badges and the DayHiker icon, or enter a custom domain for your Google Apps Pro calendar.   Conclusion If you rely on Google Calendar to stay on top of your schedule, DayHiker can help you stay scheduled and know what’s coming up.  We wish DayHiker supported multiple calendars so we could combine our Google Apps calendars with our personal Google Calendar, but even still, it is a very useful tool.  Whether you’re a tightly scheduled person or just like to jot down to-dos and keep track of them, this extension will help you do this efficiently with familiar Google tools. Link Download DayHiker from the Chrome Extensions Gallery Similar Articles Productive Geek Tips Configure Disk Defragmenter Schedule in Windows 7 or VistaSchedule Updates for Windows Media CenterOpen Multiple Sites Without Reopening the Menus in FirefoxFind a Website’s Actual Location with Chrome FlagsSubscribe to RSS Feeds in Chrome with a Single Click TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Dual Boot Ubuntu and Windows 7 What is HTML5? Default Programs Editor – One great tool for Setting Defaults Convert BMP, TIFF, PCX to Vector files with RasterVect Free Identify Fonts using WhatFontis.com Windows 7’s WordPad is Actually Good

  Read the article

• Silverlight Cream for February 02, 2011 -- #1039

  - by Dave Campbell

  In this Issue: Tony Champion, Gill Cleeren, Alex van Beek, Michael James, Ollie Riches, Peter Kuhn, Mike Ormond, WindowsPhoneGeek(-2-), Daniel N. Egan, Loek Van Den Ouweland, and Paul Thurott. Above the Fold: Silverlight: "Using the AutoCompleteBox" Peter Kuhn WP7: "Windows Phone Image Button" Loek Van Den Ouweland Training: "New WP7 Virtual Labs" Daniel N. Egan Shoutouts: SilverlightShow has their top 5 most popular news articles up: SilverlightShow for Jan 24-30, 2011 Rudi Grobler posted answers he gives to questions about Silverlight - Where do I start? Brian Noyes starts a series of Webinars at SilverlightShow this morning at 10am PDT: Free Silverlight Show Webinar: Querying and Updating Data From Silverlight Clients with WCF RIA Services Join your fellow geeks at Gangplank in Chandler Arizona this Saturday as Scott Cate and AZGroups brings you Azure Boot Camp – Feb 5th 2011 From SilverlightCream.com: Deploying Silverlight with WCF Services Tony Champion takes a step out of his norm (Pivot) and has a post up about deploying WCF Services with your SL app, and how to take the pain out of that without pulling out your hair. Getting ready for Microsoft Silverlight Exam 70-506 (Part 3) Gill Cleeren's part 3 of getting ready for the Silverlight Exam is up at SilverlightShow... with links to the first two parts. There's so much good information linked off these... thanks Gill and 'The Show'! A guide through WCF RIA Services attributes Alex van Beek has a post up you will probably want to bookmark unless you're not using WCF RIA... do you know all the attributes by heart? ... how about an excellent explanation of 10 of them? Using DeferredLoadListBox in a Pivot Control Michael James discusses using the DeferredLoadListBox, and then also using it with the Pivot control... but not without some pain points which he defines and gives the workaround for. WP7: Know your data Ollie Riches' latest is about Data and WP7 ... specifically 'knowing' what data you're needing/using to avoid the 90MB memory limit... He gives a set of steps to follow to measure your data model to avoid getting in trouble. Using the AutoCompleteBox Peter Kuhn takes a great look at the AutoCompleteBox... the basics, and then well beyond with custom data, item templates, custom filters, asynchronous filtering, and a behavior for MVVM async filtering. OData and Windows Phone 7 Part 2 Mike Ormond has part 2 of his OData/WP7 post up... lashing up the images to go along with the code this time out... nice looking app. WP7 RoundToggleButton and RoundButton in depth WindowsPhoneGeek is checking out the RoundToggleButton and RoundButton controls from the Coding4fun Toolkit in detail... of course where to get them, and then the setup, demo project included. All about Dependency Properties in Silverlight for WP7 WindowsPhoneGeek's latest post is a good dependency-property discussion related to WP7 development, but if you're just learning, it's a good place to learn about the subject. New WP7 Virtual Labs Daniel N. Egan posted links to 6 new WP7 Virtual Labs released on 1/25. Windows Phone Image Button Loek Van Den Ouweland has a style up on his blog that gives you an imageButton for your WP7 apps, and a sweet little video showing how it's done in Expression Blend too. Yet another free Windows Phone book for developers Paul Thurott found a link to another Free eBook for WP7 development. This one is by Puja Pramudya and is an English translation of the original, and is an introductory text, but hey... it's free... give it a look! Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

< Previous Page | 330 331 332 333 334 335 336 337 338 339 340 341  | Next Page >