Search Results

Search found 9365 results on 375 pages for '13 04'.

Page 336/375 | < Previous Page | 332 333 334 335 336 337 338 339 340 341 342 343  | Next Page >

  • Can't communicate between lan ports on openwrt router

    - by ScaryAardvark
    I've got a WBMR-HP-G300H Buffalo Airstation router on which I've installed the lates OpenWRT software. All is working well (ADSL, WIFI etc) except for one niggle. I can't communicate between lan ports. i.e. if I have one computer connected on lan port 1 and I try to ping another computer on lan port 2 then I get "destination unreachable". I can ping both computers from the router itself and can also ping each computer from a seperate laptop connected wirelessly. All computers are in the same subnet range (10.0.0.?/24). I suspect that I may need to configure a vlan on the switch but everytime I try and do this with various google'ed configuration I keep freezing out all lan-ports and I have to revert back using a wirelessly connected laptop. Here's my /etc/config/network: config interface 'loopback' option ifname 'lo' option proto 'static' option ipaddr '127.0.0.1' option netmask '255.0.0.0' config interface 'lan' option type 'bridge' option proto 'static' option netmask '255.255.255.0' option ipaddr '10.0.0.1' option _orig_ifname 'eth0 wlan0' option _orig_bridge 'true' option ifname 'eth0' config adsl-device 'adsl' option fwannex 'a' option annex 'a2p' config interface 'wan' option _orig_ifname 'nas0' option _orig_bridge 'false' option proto 'pppoa' option encaps 'vc' option atmdev '0' option vci '38' option vpi '0' option username '?????????????' option password '??????????????' Any help would be warmly received. Here's some more config stuff. root@OpenWrt:~# ifconfig -a br-lan Link encap:Ethernet HWaddr 00:24:A5:BD:66:08 inet addr:10.0.0.1 Bcast:10.0.0.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:226576 errors:0 dropped:346 overruns:0 frame:0 TX packets:269292 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:26771676 (25.5 MiB) TX bytes:183986450 (175.4 MiB) eth0 Link encap:Ethernet HWaddr 00:24:A5:BD:66:08 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) ifb0 Link encap:Ethernet HWaddr 36:60:EC:DF:13:A1 BROADCAST NOARP MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:32 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) ifb1 Link encap:Ethernet HWaddr 4A:7B:75:67:54:E0 BROADCAST NOARP MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:32 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:780 errors:0 dropped:0 overruns:0 frame:0 TX packets:780 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:58369 (57.0 KiB) TX bytes:58369 (57.0 KiB) mon.wlan0 Link encap:UNSPEC HWaddr 00-24-A5-BD-66-08-00-48-00-00-00-00-00-00-00-00 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2424 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:32 RX bytes:320188 (312.6 KiB) TX bytes:0 (0.0 B) pppoa-wan Link encap:Point-to-Point Protocol inet addr:81.136.179.204 P-t-P:81.134.80.1 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:258894 errors:0 dropped:0 overruns:0 frame:0 TX packets:212976 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:3 RX bytes:177341656 (169.1 MiB) TX bytes:25192459 (24.0 MiB) wlan0 Link encap:Ethernet HWaddr 00:24:A5:BD:66:08 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:204063 errors:0 dropped:0 overruns:0 frame:0 TX packets:245516 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:32 RX bytes:26613140 (25.3 MiB) TX bytes:162799765 (155.2 MiB) root@OpenWrt:~# brctl show bridge name bridge id STP enabled interfaces br-lan 8000.0024a5bd6608 no wlan0 eth0 root@OpenWrt:~# swconfig dev eth0 show Global attributes: enable_vlan: 0 Port 0: pvid: 0 link: port:0 link:up speed:1000baseT full-duplex txflow rxflow Port 1: pvid: 0 link: port:1 link:down Port 2: pvid: 0 link: port:2 link:down Port 3: pvid: 0 link: port:3 link:down Port 4: pvid: 0 link: port:4 link:up speed:100baseT full-duplex txflow rxflow auto Port 5: pvid: 0 link: port:5 link:up speed:100baseT full-duplex txflow rxflow auto Regards Mark.

    Read the article

  • iptables rule(s) to send openvpn traffic from clients over an sshuttle tunnel?

    - by Sam Martin
    I have an Ubuntu 12.04 box with OpenVPN. The VPN is working as expected -- clients can connect, browse the Web, etc. The OpenVPN server IP is 10.8.0.1 on tun0. On that same box, I can use sshuttle to tunnel into another network to access a Web server on 10.10.0.9. sshuttle does its magic using the following iptables commands: iptables -t nat -N sshuttle-12300 iptables -t nat -F sshuttle-12300 iptables -t nat -I OUTPUT 1 -j sshuttle-12300 iptables -t nat -I PREROUTING 1 -j sshuttle-12300 iptables -t nat -A sshuttle-12300 -j REDIRECT --dest 10.10.0.0/24 -p tcp --to-ports 12300 -m ttl ! --ttl 42 iptables -t nat -A sshuttle-12300 -j RETURN --dest 127.0.0.0/8 -p tcp Is it possible to forward traffic from OpenVPN clients over the sshuttle tunnel to the remote Web server? I'd ultimately like to be able to set up any complicated tunneling on the server, and have relatively "dumb" clients (iPad, etc.) be able to access the remote servers via OpenVPN. Below is a basic diagram of the scenario: [Edit: added output from the OpenVPN box] $ sudo iptables -nL -v -t nat Chain PREROUTING (policy ACCEPT 1498 packets, 252K bytes) pkts bytes target prot opt in out source destination 1512 253K sshuttle-12300 all -- * * 0.0.0.0/0 0.0.0.0/0 Chain INPUT (policy ACCEPT 322 packets, 58984 bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy ACCEPT 584 packets, 43241 bytes) pkts bytes target prot opt in out source destination 587 43421 sshuttle-12300 all -- * * 0.0.0.0/0 0.0.0.0/0 Chain POSTROUTING (policy ACCEPT 589 packets, 43595 bytes) pkts bytes target prot opt in out source destination 1175 76298 MASQUERADE all -- * eth0 10.8.0.0/24 0.0.0.0/0 Chain sshuttle-12300 (2 references) pkts bytes target prot opt in out source destination 17 1076 REDIRECT tcp -- * * 0.0.0.0/0 10.10.0.0/24 TTL match TTL != 42 redir ports 12300 0 0 RETURN tcp -- * * 0.0.0.0/0 127.0.0.0/8 $ sudo iptables -nL -v -t filter Chain INPUT (policy ACCEPT 97493 packets, 30M bytes) pkts bytes target prot opt in out source destination Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 131K 109M ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 1370 89160 ACCEPT all -- * * 10.8.0.0/24 0.0.0.0/0 0 0 REJECT all -- * * 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable [Edit 2: more OpenVPN server output] $ netstat -r Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface default 192.168.1.1 0.0.0.0 UG 0 0 0 eth0 10.8.0.0 10.8.0.2 255.255.255.0 UG 0 0 0 tun0 10.8.0.2 * 255.255.255.255 UH 0 0 0 tun0 192.168.1.0 * 255.255.255.0 U 0 0 0 eth0 [Edit 3: still more debug output] IP forwarding appears to be enabled correctly on the OpenVPN server: # find /proc/sys/net/ipv4/conf/ -name forwarding -ls -execdir cat {} \; 18926 0 -rw-r--r-- 1 root root 0 Mar 5 13:31 /proc/sys/net/ipv4/conf/all/forwarding 1 18954 0 -rw-r--r-- 1 root root 0 Mar 5 13:31 /proc/sys/net/ipv4/conf/default/forwarding 1 18978 0 -rw-r--r-- 1 root root 0 Mar 5 13:31 /proc/sys/net/ipv4/conf/eth0/forwarding 1 19003 0 -rw-r--r-- 1 root root 0 Mar 5 13:31 /proc/sys/net/ipv4/conf/lo/forwarding 1 19028 0 -rw-r--r-- 1 root root 0 Mar 5 13:31 /proc/sys/net/ipv4/conf/tun0/forwarding 1 Client routing table: $ netstat -r Routing tables Internet: Destination Gateway Flags Refs Use Netif Expire 0/1 10.8.0.5 UGSc 8 48 tun0 default 192.168.1.1 UGSc 2 1652 en1 10.8.0.1/32 10.8.0.5 UGSc 1 0 tun0 10.8.0.5 10.8.0.6 UHr 13 0 tun0 10.10.0/24 10.8.0.5 UGSc 0 0 tun0 <snip> Traceroute from client: $ traceroute 10.10.0.9 traceroute to 10.10.0.9 (10.10.0.9), 64 hops max, 52 byte packets 1 10.8.0.1 (10.8.0.1) 5.403 ms 1.173 ms 1.086 ms 2 192.168.1.1 (192.168.1.1) 4.693 ms 2.110 ms 1.990 ms 3 l100.my-verizon-garbage (client-ext-ip) 7.453 ms 7.089 ms 6.248 ms 4 * * * 5 10.10.0.9 (10.10.0.9) 14.915 ms !N * 6.620 ms !N

    Read the article

  • Laptop overheating within minutes of start up

    - by Spik330
    I have a Dell Windows 7 Home Prem with an I7-720QM. More information on the computer can be found here http://www.dell.com/support/home/us/en/04/product-support/servicetag/51CVCN1/configuration The Problem I am having is the computer will over heat unnaturally fast. From the time it takes from boot to when i can run my diagnostic tools which takes about two minutes the cpu temp is 86c after a few more minutes the cpu temp will reach 100 and the computer will black screen shut down. In total the the laptop can only be run for 3-5 minutes before completely shutting off. During this time there is nothing extensive running. After the laptop shuts down you have to wait for it to cool down or it will shut off even faster sometimes 7-15 seconds well still in the boot screen. Does anyone know what could be the problem maybe a sensor or is the computer fried?

    Read the article

  • can't connect 2 subnets through RRAS 2008 r2

    - by mcdwight6
    I'm working on a project for a networking class. In VMWare Workstation, I have to set up a 2008 r2 server with DHCP reservations for 2 clients on separate subnets and have them ping each other. Here is the output of the route print command: =========================================================================== Interface List 13 ...00 50 56 2a e7 11 ...... Intel(R) PRO/1000 MT Network Connection #3 10 ...00 0c 29 66 88 dd ...... Intel(R) PRO/1000 MT Network Connection 1 ........................... Software Loopback Interface 1 24 ...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 11 ...02 00 54 55 4e 01 ...... Teredo Tunneling Pseudo-Interface 14 ...00 00 00 00 00 00 00 e0 6TO4 Adapter 16 ...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 17 ...00 00 00 00 00 00 00 e0 isatap.{5B8FB196-616F-4168-A020-03E63A309CEC} =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 On-link 10.0.0.2 266 0.0.0.0 0.0.0.0 On-link 223.6.6.2 266 10.0.0.0 255.0.0.0 On-link 10.0.0.2 266 10.0.0.2 255.255.255.255 On-link 10.0.0.2 266 10.255.255.255 255.255.255.255 On-link 10.0.0.2 266 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 128.6.0.0 255.255.0.0 On-link 10.0.0.2 11 128.6.255.255 255.255.255.255 On-link 10.0.0.2 266 223.6.6.0 255.255.255.0 On-link 10.0.0.2 11 223.6.6.0 255.255.255.0 On-link 223.6.6.2 266 223.6.6.2 255.255.255.255 On-link 223.6.6.2 266 223.6.6.255 255.255.255.255 On-link 10.0.0.2 266 223.6.6.255 255.255.255.255 On-link 223.6.6.2 266 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 10.0.0.2 266 224.0.0.0 240.0.0.0 On-link 223.6.6.2 266 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 10.0.0.2 266 255.255.255.255 255.255.255.255 On-link 223.6.6.2 266 =========================================================================== Persistent Routes: Network Address Netmask Gateway Address Metric 0.0.0.0 0.0.0.0 10.0.0.2 Default 0.0.0.0 0.0.0.0 128.6.0.2 Default 0.0.0.0 0.0.0.0 223.6.6.2 Default 128.6.0.0 255.255.0.0 10.0.0.2 1 223.6.6.0 255.255.255.0 10.0.0.2 1 =========================================================================== IPv6 Route Table =========================================================================== Active Routes: If Metric Network Destination Gateway 1 306 ::1/128 On-link 14 1010 2002::/16 On-link 14 266 2002:8006:2::8006:2/128 On-link 1 306 ff00::/8 On-link =========================================================================== Persistent Routes: None My problem is that although I have set up both dynamic and persistent static routes in my r2 server, neither of the clients can ping even the NIC outside its own subnet. For example Client A can ping the NIC at 10.0.0.2 and vice-versa, but it gets a general transmit failure when it tries to ping the card at 223.6.6.2, let alone trying to ping the other client. I have completely disabled the firewalls on all machines and anything else I could think of, without success. What am I missing? Edit: Since posting this, I also noticed that the default gateways on my 2 NICs keep getting zeroed out. Does anyone know a fix for this?

    Read the article

  • page up/down print ~ instead of history search in terminal

    - by Desmond
    I am on a Macbook Pro with mac os x 10.8.2 I have set: page up: \033[5~ page down: \033[6~ in terminal keyboard settings (pressing esc to get \033). My ~/.xinputrc is: # Be 8 bit clean. set input-meta on set output-meta on set convert-meta off # Auto completion options set show-all-if-ambiguous on set completion-ignore-case on # Keybindings "\e[1~": beginning-of-line # Home key "\e[4~": end-of-line # End key "\e[5~": history-search-backward # Page Up "\e[6~": history-search-forward # Page Down "\e[3~": delete-char # Delete key "\e[5C": forward-word # Ctrl+right "\e[5D": backward-word # Ctrl+left I am just following a guide found on internet (actually there are a lot of guide really similar): http://macimproved.wordpress.com/2010/01/04/fix-page-updown-home-end-in-terminal/ Unfortunately, the only (terrific) result is that when I press page up (fn + up arrow) just a "~" is printed in the terminal.

    Read the article

  • Can gedit on mac be used to edit files over ssh?

    - by Dave
    I use a linux machine at work and a mac at home. I can ssh from my machine at home to my work machine. But the only editor that I have access to on the command line then is vi, which I don't like. Is there a way to use gedit on my mac to edit files remotely over an ssh connection? This page says that it can be done, but I think that it assumes that you are using gedit on ubuntu. On my mac (os 10.5.8) I don't have the "bookmark" option when I click "connect to server". http://thecodecentral.com/2010/04/02/use-gedit-as-remote-file-editor-via-ftp-and-ssh-ubuntu/comment-page-1#comment-50558

    Read the article

  • dns server bind is not work [closed]

    - by user1742080
    I just installed bind on RHEL 6 and point a domain to that server. but actually when i ping domain it returns error 1214: Here is my named.conf: // // named.conf // // Provided by Red Hat bind package to configure the ISC BIND named(8) DNS // server as a caching only nameserver (as a localhost DNS resolver only). // // See /usr/share/doc/bind*/sample/ for example named configuration files. // options { listen-on port 53 { any; }; listen-on-v6 port 53 { ::1; }; directory "/var/named"; dump-file "/var/named/data/cache_dump.db"; statistics-file "/var/named/data/named_stats.txt"; memstatistics-file "/var/named/data/named_mem_stats.txt"; allow-query { any; }; recursion yes; dnssec-enable yes; dnssec-validation yes; dnssec-lookaside auto; /* Path to ISC DLV key */ bindkeys-file "/etc/named.iscdlv.key"; managed-keys-directory "/var/named/dynamic"; }; logging { channel default_debug { file "data/named.run"; severity dynamic; }; }; zone "." IN { type hint; file "named.ca"; }; include "/etc/named.rfc1912.zones"; include "/etc/named.root.key"; zone "mydomain.com"{ type master; file "/var/named/data/named.mydomain.com"; allow-update { none; }; }; AND The content of "/var/named/data/named.mydomain.com": 1 $TTL 38400 2 3 mydomain.com. IN SOA ns1.mydomain.com. milad.yahoo.com. ( 4 2012101201 ; serial number YYMMDDNN 5 28800 ; Refresh 6 7200 ; Retry 7 864000 ; Expire 8 38400 ; Min TTL 9 ) 10 11 mydomain.com. IN A 1.2.3.4 12 www IN A 1.2.3.4 13 ns1.mydomain.com. IN A 1.2.3.4 14 ns2.mydomain.com. IN A 1.2.3.4 15 mydomain.com. IN NS ns1.mydomain.com. 16 mydomain.com. IN NS ns2.mydomain.com. AND i'm sure the named service is running: [root@server ~]# service named status version: 9.8.2rc1-RedHat-9.8.2-0.10.rc1.el6_3.3 CPUs found: 8 worker threads: 8 number of zones: 20 debug level: 0 xfers running: 0 xfers deferred: 0 soa queries in progress: 0 query logging is OFF recursive clients: 0/0/1000 tcp clients: 0/100 server is up and running named (pid 26299) is running...

    Read the article

  • mod_ssl RPM conflict

    - by 0A0D
    I build Apache httpd into an RPM using these sites: http://erikwebb.net/blog/compile-and-install-apache-24-red-hat-enterprise-linux-rhel-6-or-centos-6 http://ramblin-dude.blogspot.com/2013/04/compiling-rpm-for-httpd-on-rhel-57.html I was successful at building apr* and httpd*. However, when I try to install httpd using rpm -Uvh httpd-devel-2.2.25-1.x86_64.rpm httpd-2.2.25-1.x86_64.rpm mod_ssl-2.2.25-1.x86_64.rpm I get the following error: package mod_ssl-2.2.3-82.el5_9.x86_64 (which is newer than mod_ssl-2.2.25-1.x86_64) is already installed. I have httpd 2.2.3-82 installed. Do I need to remove it first? Seems counterintuitive.

    Read the article

  • RedHat 5.5 server does not show per processor memory utilization

    - by Mike S
    I have been searching all over internet but not finding any leads. I have a system with a memory leak that I am trying to troubleshoot. Unfortunately I am not able to see per processor memory utilization. Here are the outputs of TOP and PS commands. Linux SERVER_NAME 2.6.18-194.8.1.el5 #1 SMP Wed Jun 23 10:52:51 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux top - 09:17:13 up 18:43, 3 users, load average: 0.00, 0.00, 0.00 Tasks: 375 total, 1 running, 373 sleeping, 0 stopped, 1 zombie Cpu(s): 0.0%us, 0.0%sy, 0.0%ni,100.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 32922828k total, 32776712k used, 146116k free, 267128k buffers Swap: 5245212k total, 0k used, 5245212k free, 32141044k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1 root 15 0 10348 744 620 S 0.0 0.0 0:05.65 init 2 root RT -5 0 0 0 S 0.0 0.0 0:00.05 migration/0 3 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/0 4 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/0 5 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/1 6 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/1 7 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/1 8 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/2 9 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/2 10 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/2 11 root RT -5 0 0 0 S 0.0 0.0 0:00.01 migration/3 12 root 34 19 0 0 0 S 0.0 0.0 0:00.01 ksoftirqd/3 13 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/3 14 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/4 15 root 34 19 0 0 0 S 0.0 0.0 0:00.01 ksoftirqd/4 16 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/4 17 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/5 18 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/5 19 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/5 20 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/6 % ps -auxf | sort -nr -k 4 | head -10 Warning: bad syntax, perhaps a bogus '-'? See /usr/share/doc/procps-3.2.7/FAQ xfs 6205 0.0 0.0 23316 3892 ? Ss Aug19 0:00 xfs -droppriv -daemon uuidd 6101 0.0 0.0 60976 224 ? Ss Aug19 0:00 /usr/sbin/uuidd USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND smmsp 6130 0.0 0.0 57900 1784 ? Ss Aug19 0:00 sendmail: Queue runner@01:00:00 for /var/spool/clientmqueue rpc 5126 0.0 0.0 8052 632 ? Ss Aug19 0:00 portmap root 99 0.0 0.0 0 0 ? S< Aug19 0:00 [events/1] root 98 0.0 0.0 0 0 ? S< Aug19 0:00 [events/0] root 97 0.0 0.0 0 0 ? S< Aug19 0:00 [watchdog/31] root 96 0.0 0.0 0 0 ? SN Aug19 0:00 [ksoftirqd/31] root 95 0.0 0.0 0 0 ? S< Aug19 0:00 [migration/31] Any help with this is appretiate.

    Read the article

  • "ID 046d:c50e Logitech, Inc. Cordless Mouse Receiver" wheel-click is wrong

    - by sputnick
    I use this mouse under archlinux x86_64 with 3.2.8-1-ARCH kernel. I have some problems to select and then paste with the wheel-click in some applications like konversation, not in a terminal nor an editor. I don't know if it's a hardware problem or a software one. $ lsusb -v Bus 002 Device 110: ID 046d:c50e Logitech, Inc. Cordless Mouse Receiver Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x046d Logitech, Inc. idProduct 0xc50e Cordless Mouse Receiver bcdDevice 25.10 iManufacturer 1 Logitech iProduct 2 USB RECEIVER iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 34 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 70mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 1 Boot Interface Subclass bInterfaceProtocol 2 Mouse iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.11 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 95 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 10 Device Status: 0x0000 (Bus Powered) When I see what's happens in xev, the output is different compared to another mouse My buggy Logitech mouse : ButtonPress event, serial 40, synthetic NO, window 0x4400001, root 0x15a, subw 0x4400002, time 170350700, (48,52), root:(1491,75), state 0x10, button 11, same_screen YES EnterNotify event, serial 40, synthetic NO, window 0x4400001, root 0x15a, subw 0x0, time 170350700, (48,52), root:(1491,75), mode NotifyGrab, detail NotifyInferior, same_screen YES, focus YES, state 16 KeymapNotify event, serial 40, synthetic NO, window 0x0, keys: 90 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ButtonPress event, serial 40, synthetic NO, window 0x4400001, root 0x15a, subw 0x4400002, time 170350716, (48,52), root:(1491,75), state 0x10, button 6, same_screen YES ButtonRelease event, serial 40, synthetic NO, window 0x4400001, root 0x15a, subw 0x4400002, time 170350716, (48,52), root:(1491,75), state 0x10, button 6, same_screen YES ButtonRelease event, serial 40, synthetic NO, window 0x4400001, root 0x15a, subw 0x4400002, time 170350988, (48,52), root:(1491,75), state 0x10, button 11, same_screen YES LeaveNotify event, serial 40, synthetic NO, window 0x4400001, root 0x15a, subw 0x0, time 170350988, (48,52), root:(1491,75), mode NotifyUngrab, detail NotifyInferior, same_screen YES, focus YES, state 16 a working mouse (dell) : ButtonPress event, serial 40, synthetic NO, window 0x4400001, root 0x15a, subw 0x4400002, time 170245131, (46,32), root:(1489,55), state 0x10, button 2, same_screen YES EnterNotify event, serial 40, synthetic NO, window 0x4400001, root 0x15a, subw 0x0, time 170245131, (46,32), root:(1489,55), mode NotifyGrab, detail NotifyInferior, same_screen YES, focus YES, state 528 KeymapNotify event, serial 40, synthetic NO, window 0x0, keys: 90 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ButtonRelease event, serial 40, synthetic NO, window 0x4400001, root 0x15a, subw 0x4400002, time 170245411, (46,32), root:(1489,55), state 0x210, button 2, same_screen YES LeaveNotify event, serial 40, synthetic NO, window 0x4400001, root 0x15a, subw 0x0, time 170245411, (46,32), root:(1489,55), mode NotifyUngrab, detail NotifyInferior, same_screen YES, focus YES, state 16 A demo of the problem when I use konversation (IRC) : http://www.youtube.com/watch?v=lhmr92M7NCc I tried to modify the button map with xmodmap like this with no success (one at a time) : xmodmap -e "pointer = 1 0 3" xmodmap -e "pointer = 1 1 3" xmodmap -e "pointer = 1 2 3" xmodmap -e "pointer = 1 3 3" xmodmap -e "pointer = 1 4 3" xmodmap -e "pointer = 1 5 3" xmodmap -e "pointer = 1 6 3" xmodmap -e "pointer = 1 7 3" xmodmap -e "pointer = 1 8 3" xmodmap -e "pointer = 1 9 3" xmodmap -e "pointer = 1 10 3" xmodmap -e "pointer = 1 11 3" xmodmap -e "pointer = 1 12 3" xmodmap -e "pointer = 1 13 3" xmodmap -e "pointer = 1 14 3" xmodmap -e "pointer = 1 15 3" xmodmap -e "pointer = 1 16 3" xmodmap -e "pointer = 1 17 3" xmodmap -e "pointer = 1 18 3" xmodmap -e "pointer = 1 19 3" xmodmap -e "pointer = 1 20 3" xmodmap -e "pointer = 1 21 3" xmodmap -e "pointer = 1 22 3" xmodmap -e "pointer = 1 23 3" xmodmap -e "pointer = 1 24 3" xmodmap -e "pointer = 1 25 3" Any clue ? I would like to avoid buying a new mouse just for a paste problem.

    Read the article

  • e2fsck extremly slow, although enough memory exists

    - by kaefert
    I've got this external USB-Disk: kaefert@blechmobil:~$ lsusb -s 2:3 Bus 002 Device 003: ID 0bc2:3320 Seagate RSS LLC As can be seen in this dmesg output, there are some problems that prevents that disk from beeing mounted: kaefert@blechmobil:~$ dmesg | grep sdb [ 114.474342] sd 5:0:0:0: [sdb] 732566645 4096-byte logical blocks: (3.00 TB/2.72 TiB) [ 114.475089] sd 5:0:0:0: [sdb] Write Protect is off [ 114.475092] sd 5:0:0:0: [sdb] Mode Sense: 43 00 00 00 [ 114.475959] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 114.477093] sd 5:0:0:0: [sdb] 732566645 4096-byte logical blocks: (3.00 TB/2.72 TiB) [ 114.501649] sdb: sdb1 [ 114.502717] sd 5:0:0:0: [sdb] 732566645 4096-byte logical blocks: (3.00 TB/2.72 TiB) [ 114.504354] sd 5:0:0:0: [sdb] Attached SCSI disk [ 116.804408] EXT4-fs (sdb1): ext4_check_descriptors: Checksum for group 3976 failed (47397!=61519) [ 116.804413] EXT4-fs (sdb1): group descriptors corrupted! So I went and fired up my favorite partition manager - gparted, and told it to verify and repair the partition sdb1. This made gparted call e2fsck (version 1.42.4 (12-Jun-2012)) e2fsck -f -y -v /dev/sdb1 Although gparted called e2fsck with the "-v" option, sadly it doesn't show me the output of my e2fsck process (bugreport https://bugzilla.gnome.org/show_bug.cgi?id=467925 ) I started this whole thing on Sunday (2012-11-04_2200) evening, so about 48 hours ago, this is what htop says about it now (2012-11-06-1900): PID USER PRI NI VIRT RES SHR S CPU% MEM% TIME+ Command 3704 root 39 19 1560M 1166M 768 R 98.0 19.5 42h56:43 e2fsck -f -y -v /dev/sdb1 Now I found a few posts on the internet that discuss e2fsck running slow, for example: http://gparted-forum.surf4.info/viewtopic.php?id=13613 where they write that its a good idea to see if the disk is just that slow because maybe its damaged, and I think these outputs tell me that this is not the case in my case: kaefert@blechmobil:~$ sudo hdparm -tT /dev/sdb /dev/sdb: Timing cached reads: 3562 MB in 2.00 seconds = 1783.29 MB/sec Timing buffered disk reads: 82 MB in 3.01 seconds = 27.26 MB/sec kaefert@blechmobil:~$ sudo hdparm /dev/sdb /dev/sdb: multcount = 0 (off) readonly = 0 (off) readahead = 256 (on) geometry = 364801/255/63, sectors = 5860533160, start = 0 However, although I can read quickly from that disk, this disk speed doesn't seem to be used by e2fsck, considering tools like gkrellm or iotop or this: kaefert@blechmobil:~$ iostat -x Linux 3.2.0-2-amd64 (blechmobil) 2012-11-06 _x86_64_ (2 CPU) avg-cpu: %user %nice %system %iowait %steal %idle 14,24 47,81 14,63 0,95 0,00 22,37 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await r_await w_await svctm %util sda 0,59 8,29 2,42 5,14 43,17 160,17 53,75 0,30 39,80 8,72 54,42 3,95 2,99 sdb 137,54 5,48 9,23 0,20 587,07 22,73 129,35 0,07 7,70 7,51 16,18 2,17 2,04 Now I researched a little bit on how to find out what e2fsck is doing with all that processor time, and I found the tool strace, which gives me this: kaefert@blechmobil:~$ sudo strace -p3704 lseek(4, 41026998272, SEEK_SET) = 41026998272 write(4, "\212\354K[_\361\3nl\212\245\352\255jR\303\354\312Yv\334p\253r\217\265\3567\325\257\3766"..., 4096) = 4096 lseek(4, 48404766720, SEEK_SET) = 48404766720 read(4, "\7t\260\366\346\337\304\210\33\267j\35\377'\31f\372\252\ffU\317.y\211\360\36\240c\30`\34"..., 4096) = 4096 lseek(4, 41027002368, SEEK_SET) = 41027002368 write(4, "\232]7Ws\321\352\t\1@[+5\263\334\276{\343zZx\352\21\316`1\271[\202\350R`"..., 4096) = 4096 lseek(4, 48404770816, SEEK_SET) = 48404770816 read(4, "\17\362r\230\327\25\346//\210H\v\311\3237\323K\304\306\361a\223\311\324\272?\213\tq \370\24"..., 4096) = 4096 lseek(4, 41027006464, SEEK_SET) = 41027006464 write(4, "\367yy>x\216?=\324Z\305\351\376&\25\244\210\271\22\306}\276\237\370(\214\205G\262\360\257#"..., 4096) = 4096 lseek(4, 48404774912, SEEK_SET) = 48404774912 read(4, "\365\25\0\21|T\0\21}3t_\272\373\222k\r\177\303\1\201\261\221$\261B\232\3142\21U\316"..., 4096) = 4096 ^CProcess 3704 detached around 16 of these lines every second, so 4 read and 4 write operations every second, which I don't consider to be a lot.. And finally, my question: Will this process ever finish? If those numbers from fseek (48404774912) represent bytes, that would be something like 45 gigabytes, with this beeing a 3 terrabyte disk, which would give me 134 days to go, if the speed stays constant, and he scans the disk like this completly and only once. Do you have some advice for me? I have most of the data on that disk elsewhere, but I've put a lot of hours into sorting and merging it to this disk, so I would prefer to getting this disk up and running again, without formatting it anew. I don't think that the hardware is damaged since the disk is only a few months and since I can't see any I/O errors in the dmesg output. UPDATE: I just looked at the strace output again (2012-11-06_2300), now it looks like this: lseek(4, 1419860611072, SEEK_SET) = 1419860611072 read(4, "3#\f\2447\335\0\22A\355\374\276j\204'\207|\217V|\23\245[\7VP\251\242\276\207\317:"..., 4096) = 4096 lseek(4, 43018145792, SEEK_SET) = 43018145792 write(4, "]\206\231\342Y\204-2I\362\242\344\6R\205\361\324\177\265\317C\334V\324\260\334\275t=\10F."..., 4096) = 4096 lseek(4, 1419860615168, SEEK_SET) = 1419860615168 read(4, "\262\305\314Y\367\37x\326\245\226\226\320N\333$s\34\204\311\222\7\315\236\336\300TK\337\264\236\211n"..., 4096) = 4096 lseek(4, 43018149888, SEEK_SET) = 43018149888 write(4, "\271\224m\311\224\25!I\376\16;\377\0\223H\25Yd\201Y\342\r\203\271\24eG<\202{\373V"..., 4096) = 4096 lseek(4, 1419860619264, SEEK_SET) = 1419860619264 read(4, ";d\360\177\n\346\253\210\222|\250\352T\335M\33\260\320\261\7g\222P\344H?t\240\20\2548\310"..., 4096) = 4096 lseek(4, 43018153984, SEEK_SET) = 43018153984 write(4, "\360\252j\317\310\251G\227\335{\214`\341\267\31Y\202\360\v\374\307oq\3063\217Z\223\313\36D\211"..., 4096) = 4096 So this number of the lseeks before the reads, like 1419860619264 are already a lot bigger, standing for 1.29 terabytes if the numbers are bytes, so it doesn't seem to be a linear progress on a big scale, maybe there are only some areas that need work, that have big gaps in between them. (times are in CET)

    Read the article

  • Weird Apache Access Logs

    - by user38480
    I see repeated requests like these in my Apache Access Logs and they have been eating up all my CPU. I have a normal WordPress installation. All i changed in the Apache Configuration was changing the DocumentRoot from /var/www/html to /var/www for both ssl and the default configuration. Also, the file referenced in the requests(updatedll.jpeg) does not exist on my server and also isn't referenced in the source code served by any page of the web application. Could this be a security threat? What are these actually and what can i do to stop them. I changed the ip address of my server. They still kept coming. Meaning that somebody is actually hitting the domain name and not the ip address. Why does my server send a 301 for these requests? Shouldn't it be sending a 404? Is it because Wordpress is installed in my root directory and the .htaccess file present for Wordpress is sending a 301 redirect? My disk access logs also seem to have high peaks intermittently. But nobody is actually accessing the site. I see no access logs except these below. Also, i see that all the requests seem to be coming from one of the following 5 ip addresses. 201.4.132.43 - - [05/Jun/2014:07:35:08 -0400] "GET /updatedll.jpg HTTP/1.1" 301 465 "-" "Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.1; WOW64; Trident/4.0; BTRS103681; GTB7.5; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; InfoPath.2; OfficeLiveConnector.1.3; OfficeLivePatch.0.0; AskTbATU3/5.15.29.67612; BRI/2)" 187.40.241.48 - - [05/Jun/2014:07:35:08 -0400] "GET /updatedll.jpg HTTP/1.1" 301 465 "-" "Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; Trident/4.0; GTB7.5; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)" 186.56.134.132 - - [05/Jun/2014:07:35:10 -0400] "GET /updatedll.jpg HTTP/1.0" 301 428 "-" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; .NET CLR 1.1.4322)" 71.223.252.14 - - [05/Jun/2014:07:35:13 -0400] "GET /updatedll.jpg HTTP/1.1" 301 465 "-" "Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; Trident/4.0; BTRS31756; GTB7.5; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; .NET4.0C; .NET4.0E; InfoPath.2)" 85.245.229.167 - - [05/Jun/2014:07:35:14 -0400] "GET /updatedll.jpg HTTP/1.1" 301 465 "-" "Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.1; Trident/7.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; MAAU; .NET4.0C; BRI/2; .NET4.0E; MAAU)"

    Read the article

  • Set source address to use tun device does not work (Debian Squeeze)

    - by A. Donda
    there have been similar questions on StackExchange but none of the answers helped me, so I'll try a question of my own. I have a VPN connection via OpenVPN. By default, all traffic is redirected through the tunnel using OpenVPN's "two more specific routes" trick, but I disabled that. My routing table is like this: 198.144.156.141 192.168.2.1 255.255.255.255 UGH 0 0 0 eth0 10.30.92.5 0.0.0.0 255.255.255.255 UH 0 0 0 tun1 10.30.92.1 10.30.92.5 255.255.255.255 UGH 0 0 0 tun1 192.168.2.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 0.0.0.0 10.30.92.5 0.0.0.0 UG 0 0 0 tun1 0.0.0.0 192.168.2.1 0.0.0.0 UG 0 0 0 eth0 And the interface configuration is like this: # ifconfig eth0 Link encap:Ethernet HWaddr XX-XX- inet addr:192.168.2.100 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::211:9ff:fe8d:acbd/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:394869 errors:0 dropped:0 overruns:0 frame:0 TX packets:293489 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:388519578 (370.5 MiB) TX bytes:148817487 (141.9 MiB) Interrupt:20 Base address:0x6f00 tun1 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:10.30.92.6 P-t-P:10.30.92.5 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:64 errors:0 dropped:0 overruns:0 frame:0 TX packets:67 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:9885 (9.6 KiB) TX bytes:4380 (4.2 KiB) plus the lo device. The routing table has two default routes, one via eth0 through my local network router (DSL modem) at 192.168.2.1, and another via tun1 through the VPN's gateway. With this configuration, if I connect to a site, the route chosen is the direct one (because it has less hops?): # traceroute 8.8.8.8 -n traceroute to 8.8.8.8 (8.8.8.8), 30 hops max, 60 byte packets 1 192.168.2.1 0.427 ms 0.491 ms 0.610 ms 2 213.191.89.13 17.981 ms 20.137 ms 22.141 ms 3 62.109.108.48 23.681 ms 25.009 ms 26.401 ms ... This is fine, because my goal is to send only traffic from specific applications through the tunnel (esp. transmission, using its -i / bind-address-ipv4 option). To test whether this can work at all, I check it first with traceroute's -s option: # traceroute 8.8.8.8 -n -s 10.30.92.6 traceroute to 8.8.8.8 (8.8.8.8), 30 hops max, 60 byte packets 1 * * * 2 * * * 3 * * * ... This I take to mean that connection using the tunnel's local address as source is not possible. What is possible (though only as root) is to specify the source interface: # traceroute 8.8.8.8 -n -i tun1 traceroute to 8.8.8.8 (8.8.8.8), 30 hops max, 60 byte packets 1 10.30.92.1 129.337 ms 297.758 ms 297.725 ms 2 * * * 3 198.144.152.17 297.653 ms 297.652 ms 297.650 ms ... So apparently the tun1 interface is working and it is possible to send packets through it. But selecting the source interface is not implemented in my actual target application (transmission), so I would like to get source address selection to work. What am I doing wrong?

    Read the article

  • Lockdown users on Windows Server 2012

    - by el.severo
    I set up a Active Directory on a server machine with Windows Server 2012 and I'd like to create some users with limitations like Windows Steady State does in Windows XP (locally). Seen already the Windows SteadyState Handbook (with Windows Server 2008), but I'd like to know if anyone has tried this before, the limitations are the following: 1. Prevent locked or roaming user profiles that cannot be found on the computer from logging on 2. Do not cache copies of locked or roaming user profiles for users who have previously logged on to this computer 3. Do not allow Windows to compute and store passwords using LAN Manager Hash values 4. Do not store usernames or passwords used to log on to the Windows Live ID or the domain 5. Prevent users from creating folders and files on drive C:\ 6. Lock profile to prevent the user from making permanent changes 7. Remove the Control Panel, Printer and Network Settings from the Classic Start menu 8. Remove the Favorites icon 9. Remove the My Network Places icon 10. Remove the Frequently Used Program list 11. Remove the Shared documents folder from My Computer 12. Remove control Panel icon 13. Remove the Set Program Access and Defaults icon 14. Remove the Network Connection(Connect To)icon 15. Remove the Printers and Faxes icon 16. Remove the Run icon 17. Prevent access to Windows Explorer features: Folder Options, Customize Toolbar, and the Notification Area 18. Prevent access to the taskbar 19. Prevent access to the command prompt 20. Prevent access to the registry editor 21. Prevent access to the Task Manager 22. Prevent access to Microsoft Management Console utilities 23. Prevent users from adding or removing printers 24. Prevent users from locking the computer 25. Prevent password changes (also requires the Control Panel icon to be removed) 26. Disable System Tools and other management programs 27. Prevent users from saving files to the desktop 28. Hide A Drive 29. Hide B Drive 30. Hide C Drive 31. Prevent changes to Internet Explorer registry settings 32. Empty the Temporary Internet Files folder when Internet Explorer is closed 33. Remove Internet Options 34. Remove General tab in Internet Options 35. Remove Security tab in Internet Options 36. Remove Privacy tab in Internet Options 37. Remove Content tab in Internet Options 38. Remove Connections tab in Internet Options 39. Remove Programs tab in Internet Options 40. Remove Advanced tab in Internet Options 41. Set a home page (Internet Explorer) 42. Restrict the possibility to change desktop image 43. Restrict the possibility to change wallpaper 44. Restrict usb flash drives Any suggestions for this? UPDATE: As @Dan suggested me I'd like to specify that would be applied to a educational scenario where students can login from a computer and want to add some restrictions to them.

    Read the article

  • Building modules with linux kernel for custom flavor

    - by Chandan Apsangi
    I followed the instructions given in the link: http://blog.avirtualhome.com/how-to-compile-a-new-ubuntu-11-04-natty-kernel/ for building a custom kernel and booting it. Everything works fine, except that when building it, I used the option skipmodule=true (as given in this link), so I guess the modules are not built for this kernel. I'm saying this because after I installed the image (using dpkg -i), when I run 'ls -l' in the /lib/modules/2.6.38-11-i5 folder, all the files/folders except the 'kernel' folder have got updated (Btw, I had built it last time and it had worked fine,this is an update on the same kernel source). So is there some option/command that I missed that exports the modules as well? Thanks for your help.

    Read the article

  • Bringing the xenbr0 interface up on XEN under Ubuntu 8.04

    - by iyl
    I installed XEN on Ubuntu 8.04 using this tutorial: http://www.howtoforge.com/ubuntu-8.04-server-install-xen-from-ubuntu-repositories but after I reboot with the XEN kernel, I don't have xenbr0 device. I see that network-bridge script runs and it creates peth0 device, but not xenbr0. I have a very basic IP setup, with a single static IP defined in /etc/network/interfaces. The only unusual thing is that my hosting (1&1) gave me a netmask 255.255.255.255, so I had to add the default gateway with this script: /sbin/route add -host 10.255.255.1 dev eth0 /sbin/route add default gw 10.255.255.1 Everything else is plain vanilla Ubuntu 8.04.

    Read the article

  • My 3D Games crashing in these scenarios

    - by desaivv
    I have a situation here which I am unable to solve. I bought a PC last year March, here are my specs: Intel Core i3 550 @ 3GHz 4 GB RAM @400 MHz XFX GeForce 9500 GT graphics card 1GB @550MHz 500 GB HDD Lately as soon as I load my save game of Skyrim, it crashes. I have been playing Skyrim since I joined Gaming.SE site. Crashes as in the entire scene gets red lines. I can not ALT + TAB back or even CTRL + ALT + DEL either. My only recourse is a hard reset via the power button. Can not take a screen shot either. I have the latest Forceware 296.10 drivers also. This has been happening since the last 2 weeks. I always use Driver Sweeper to clean my old drivers, since that is what XFXForce recommends before installing new drivers. I installed MSI Afterburner lately to see my GPU temperature. My GPU is default, never over-clocked it. In MSI's Afterburner, I can not adjust fan speed. It is greyed out. Also in settings there is no fan tab. With normal Internet browsing it stays at 51 C. Ran Memtest86 over night with level 11. Took about 13 hours, but no errors in my RAM. I even re-installed my OS, with just the 296 drivers. The fan for the GPU does come on. I can play Diablo 2. I can not get past Warcraft 3's menu selection. There WAS some dust in my machine, but I always try and keep everything clean, since in my home town dust is an issue. Always keep cool my entire PC cabinet. My friend came with his functioning graphics card, we bought our PCs at the same time with exact same specifications. His card did not work either. Same problem with the scene freezing with red lines. I did do my research before posting here. That is how I was able to learn about MSI Afterburner, Driver Sweeper, SpeedFan etc. I followed posts on Tom's Hardware too regarding people that had similar problems. One person suggested and was followed by worked as well the suggestion to "Bake the card in an oven". Since I bought it, played Diablo 2 for months, Starcraft 2 campaign for months and Skyrim recently for months. Bought ME3 also. I am at my wits end. I do not know what else to do. I can go out and buy a card, but my friend's card did not work either. I can use the machine for Eclipse or VS2010 development just fine. Just not with 3D gaming. I originally posted this question on Gaming.SE But I was directed here. I have browsed the SU database for my problem and found this, this, and this. But none of these cover my question. My machine is only one year old. Can some experienced superuser(s) shed some light on this scenario? Is it a 3D graphics card problem? Will a brand new card work? What else can I try to pin point the problem? Can it be the Motherboard? Thanks.

    Read the article

  • How do bots access directories on a server that are not DocumentRoot of public IP address? How do I stop them?

    - by tmsimont
    I have a local network set up with apache2 and "named" running on OpenSuse 13.1 Linux. I used the "named" service to use my computer as a domain server. I set up my router to point to ask my computer for domain lookups, so I have a chance to have it rewrite a bunch of domains on my network to its own local IP, 192.168.0.111 This works great. I use virtual host configuration to allow various domains and subdomains (re-routed to the same IP via named) to pull up different directories in my computer. For example: <VirtualHost *:80> ServerName 192.168.0.111 ServerAlias fmb.wa.net DocumentRoot /home/work/wa.net/fmb </VirtualHost> <VirtualHost *:80> ServerName 192.168.0.111 ServerAlias postrecord.wa.net DocumentRoot /home/work/wa.net/postrecord </VirtualHost> <VirtualHost *:80> ServerName 192.168.0.111 ServerAlias cvalley.wa.net DocumentRoot /home/work/wa.net/cvalley_local </VirtualHost> This makes it possible for me to hit cvalley.wa.net from any device in my network and get the site that lives in /home/work/wa.net/cvalley_local I decided to forward port 80 to this computer, so I could share a few development sites with coworkers. I can't control which site they see with the same named service, because they'd have to use my computer as their domain name server... So I added a line like this: <VirtualHost *:80> ServerName 192.168.0.111 ServerAlias MY.IP.XXX.XX DocumentRoot /home/work/wa.net/cvalley </VirtualHost> Where "MY.IP.XXX.XX" is my public IP address. This works as expected, when you hit my IP address from a public network you see the site that lives in /home/work/wa.net/cvalley. The point of confusion that I have is that there are public IP addresses in my logs in other sites. I would have expected it to be impossible to access other sites in my network, unless the public user somehow figured out what I'm calling my ServerAliases, and is mimicing my domain set up... How can public traffic be hitting my other local sites? How can I recreate this kind of access? Here are some examples of public IP's hitting my VirtualHost sites: 162.253.66.76 - - [15/Aug/2014:19:20:47 -0600] "GET /xmlrpc.php HTTP/1.0" 404 1004 "-" "-" 162.253.66.74 - - [16/Aug/2014:10:50:28 -0600] "GET / HTTP/1.0" 200 262 "-" "masscan/1.0 (https://github.com/robertdavidgraham/masscan)" 185.4.227.194 - - [16/Aug/2014:11:16:45 -0600] "GET http://24x7-allrequestsallowed.com/?PHPSESSID=1rysxtj500143WQMVT%5E_NAZ%5BQ HTTP/1.1" 200 262 "-" "-" 101.226.254.138 - - [16/Aug/2014:13:32:14 -0600] "HEAD / HTTP/1.0" 200 - "-" "-" 162.253.66.74 - - [16/Aug/2014:14:26:19 -0600] "GET / HTTP/1.0" 200 262 "-" "masscan/1.0 (https://github.com/robertdavidgraham/masscan)" 212.129.2.119 - - [16/Aug/2014:16:00:51 -0600] "HEAD / HTTP/1.0" 200 - "-" "-" 91.240.163.111 - - [16/Aug/2014:18:34:32 -0600] "GET / HTTP/1.0" 200 262 "-" "masscan/1.0 (https://github.com/robertdavidgraham/masscan)" 162.253.66.74 - - [16/Aug/2014:19:02:53 -0600] "GET / HTTP/1.0" 200 262 "-" "masscan/1.0 (https://github.com/robertdavidgraham/masscan)" 122.226.223.69 - - [17/Aug/2014:05:53:09 -0600] "GET http://www.k2proxy.com//hello.html HTTP/1.1" 404 1006 "-" "Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.1; WOW64; Trident/6.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; .NET4.0C; .NET4.0E)" ::1 - - [17/Aug/2014:10:19:26 -0600] "OPTIONS * HTTP/1.0" 200 - "-" "Apache/2.4.6 (Linux/SUSE) OpenSSL/1.0.1e PHP/5.4.20 (internal dummy connection)" 162.209.65.196 - - [17/Aug/2014:15:31:53 -0600] "HEAD / HTTP/1.0" 200 - "-" "-" 111.206.199.163 - - [18/Aug/2014:11:12:56 -0600] "HEAD / HTTP/1.0" 200 - "-" "-" 37.187.180.168 - - [18/Aug/2014:15:40:00 -0600] "HEAD / HTTP/1.0" 200 - "-" "-" 62.210.38.226 - - [18/Aug/2014:18:35:16 -0600] "HEAD / HTTP/1.0" 200 - "-" "-" Is there anything that I can do to reliably deny public access by default, but allow it only in one VirtualHost?

    Read the article

  • Table Sorting in Excel 2010 Cannot Parse the Table Headers Correctly

    - by Truth
    I have a rather weird issue I've never faced before. After defining my table with borders and such, and filling out data in my table, I try to sort my table according to the "ratio" (first) column, from biggest to smallest. When I right click the header and select the corresponding option, the table gets sorted, but the first row is omitted by the sorting function. What I mean is that the first line (with 3.50 ratio) will forever stay at the top line, even when I sort otherwise (by a different column, in a different order). This is my table below, it's tab separated so it's not very readable, but I hope you'll manage. ???? ??????? ????? ??? ???? ??? ??? ??? 14 4 0 0 0 0 0 0 0 0 0 0 0 0 0 3.50 3.50 ?????? 23 8 0 0 0 0 0 0 0 0 0 0 0 0 0 2.88 2.88 ???? 16 4 0 0 0 0 0 0 0 0 0 0 0 0 0 4.00 4.00 ??? 7 2 0 0 0 0 0 0 0 0 0 0 0 0 0 3.50 3.50 ???? 13 4 0 0 0 0 0 0 0 0 0 0 0 0 0 3.25 3.25 ????? 12 4 0 0 0 0 0 0 0 0 0 0 0 0 0 3.00 3.00 ???? 10 4 0 0 0 0 0 0 0 0 0 0 0 0 0 2.50 2.50 ??? 38 12 0 0 0 0 0 0 0 0 0 0 0 0 0 3.17 3.17 ???? 14 4 0 0 0 0 0 0 0 0 0 0 0 0 0 3.50 3.50 ????? 31 10 0 0 0 0 0 0 0 0 0 0 0 0 0 3.10 3.10 ???? 24 8 0 0 0 0 0 0 0 0 0 0 0 0 0 3.00 3.00 ????? 23 8 0 0 0 0 0 0 0 0 0 0 0 0 0 2.88 2.88 ???? 14 4 0 0 0 0 0 0 0 0 0 0 0 0 0 3.50 3.50 ???? 16 4 0 0 0 0 0 0 0 0 0 0 0 0 0 4.00 4.00 ???? 24 8 0 0 0 0 0 0 0 0 0 0 0 0 0 3.00 3.00 ???? 30 10 0 0 0 0 0 0 0 0 0 0 0 0 0 3.00 3.00 ????? 21 6 0 0 0 0 0 0 0 0 0 0 0 0 0 3.50 3.50 ???? 42 12 0 0 0 0 0 0 0 0 0 0 0 0 0 3.50 3.50 ??? 11 4 0 0 0 0 0 0 0 0 0 0 0 0 0 2.75 2.75 ???? 5 2 0 0 0 0 0 0 0 0 0 0 0 0 0 2.50 2.50 ???? 4 2 0 0 0 0 0 0 0 0 0 0 0 0 0 2.00 2.00 ??? 4 2 0 0 0 0 0 0 0 0 0 0 0 0 0 2.00 2.00

    Read the article

  • Exception Errno::EPIPE in Passenger RequestHandler (Broken pipe)

    - by Millisami
    Hi, Upgraded to Rails 2.3.2 and Passenger 2.2.4 on Ubuntu hardy slice at slicehost with Apache2 I'm getting this same above discussed error in my Apache error.log of system /var/logs/apache2/ [ pid=4249 file=ext/apache2/Hooks.cpp:638 time=2009-07-04 11:47:32.752 ]: No data received from the backend application (process 4383) within 45000 msec. Either the backend application is frozen, or your TimeOut value of 45 seconds is too low. Please check whether your application is frozen, or increase the value of the TimeOut configuration directive. *** Exception Errno::EPIPE in Passenger RequestHandler (Broken pipe) (process 4391): from /usr/lib/ruby/gems/1.8/gems/passenger-2.2.4/lib/ phusion_passenger/rack/request_handler.rb:93:in `write' from /usr/lib/ruby/gems/1.8/gems/passenger-2.2.4/lib/ phusion_passenger/rack/request_handler.rb:93:in `process_request' from /usr/lib/ruby/gems/1.8/gems/passenger-2.2.4/lib/ phusion_passenger/abstract_request_handler.rb:206:in `main_loop' from /usr/lib/ruby/gems/1.8/gems/passenger-2.2.4/lib/ phusion_passenger/railz/application_spawner.rb:376:in `start_request_handler' from /usr/lib/ruby/gems/1.8/gems/passenger-2.2.4/lib/ phusion_passenger/railz/application_spawner.rb:334:in `handle_spawn_application' from /usr/lib/ruby/gems/1.8/gems/passenger-2.2.4/lib/ phusion_passenger/utils.rb:182:in `safe_fork' from /usr/lib/ruby/gems/1.8/gems/passenger-2.2.4/lib/ phusion_passenger/railz/application_spawner.rb:332:in `handle_spawn_application' from /usr/lib/ruby/gems/1.8/gems/passenger-2.2.4/lib/ phusion_passenger/abstract_server.rb:351:in `__send__' from /usr/lib/ruby/gems/1.8/gems/passenger-2.2.4/lib/ phusion_passenger/abstract_server.rb:351:in `main_loop' from /usr/lib/ruby/gems/1.8/gems/passenger-2.2.4/lib/ phusion_passenger/abstract_server.rb:195:in `start_synchronously' from /usr/lib/ruby/gems/1.8/gems/passenger-2.2.4/lib/ phusion_passenger/abstract_server.rb:162:in `start' from /usr/lib/ruby/gems/1.8/gems/passenger-2.2.4/lib/ phusion_passenger/railz/application_spawner.rb:213:in `start' from /usr/lib/ruby/gems/1.8/gems/passenger-2.2.4/lib/ phusion_passenger/spawn_manager.rb:261:in `spawn_rails_application' from /usr/lib/ruby/gems/1.8/gems/passenger-2.2.4/lib/ phusion_passenger/abstract_server_collection.rb:126:in `lookup_or_add' from /usr/lib/ruby/gems/1.8/gems/passenger-2.2.4/lib/ phusion_passenger/spawn_manager.rb:255:in `spawn_rails_application' from /usr/lib/ruby/gems/1.8/gems/passenger-2.2.4/lib/ phusion_passenger/abstract_server_collection.rb:80:in `synchronize' from /usr/lib/ruby/gems/1.8/gems/passenger-2.2.4/lib/ phusion_passenger/abstract_server_collection.rb:79:in `synchronize' from /usr/lib/ruby/gems/1.8/gems/passenger-2.2.4/lib/ phusion_passenger/spawn_manager.rb:254:in `spawn_rails_application' from /usr/lib/ruby/gems/1.8/gems/passenger-2.2.4/lib/ phusion_passenger/spawn_manager.rb:153:in `spawn_application' from /usr/lib/ruby/gems/1.8/gems/passenger-2.2.4/lib/ phusion_passenger/spawn_manager.rb:286:in `handle_spawn_application' from /usr/lib/ruby/gems/1.8/gems/passenger-2.2.4/lib/ phusion_passenger/abstract_server.rb:351:in `__send__' from /usr/lib/ruby/gems/1.8/gems/passenger-2.2.4/lib/ phusion_passenger/abstract_server.rb:351:in `main_loop' from /usr/lib/ruby/gems/1.8/gems/passenger-2.2.4/lib/ phusion_passenger/abstract_server.rb:195:in `start_synchronously' from /usr/lib/ruby/gems/1.8/gems/passenger-2.2.4/bin/passenger-spawn- server:61 *** Exception Errno::EPIPE in Passenger RequestHandler (Broken pipe) (process 4383): and these too. pid=4362 file=ext/apache2/Hooks.cpp:638 time=2009-07-04 11:55:19.251 ]: No data received from the backend application (process 4383) within 45000 msec. Either the backend application is frozen, or your TimeOut value of 45 seconds is too low. Please check whether your application is frozen, or increase the value of the TimeOut configuration directive. [ pid=4298 file=ext/apache2/Hooks.cpp:638 time=2009-07-04 11:55:19.255 ]: No data received from the backend application (process 4252) within 45000 msec. Either the backend application is frozen, or your TimeOut value of 45 seconds is too low. Please check whether your application is frozen, or increase the value of the TimeOut configuration directive. [Sat Jul 04 11:55:19 2009] [error] [client 86.96.226.13] Premature end of script headers: 41, referer: http://domain.com/ [ pid=4373 file=ext/apache2/Hooks.cpp:638 time=2009-07-04 11:55:19.559 ]: Its getting me mad and on the browser, sometimes its show and when refreshed, Application Error 500 shows up in frequent basis. any directions??

    Read the article

  • "Content is not allowed in prolog" when parsing perfectly valid XML on GAE

    - by Adrian Petrescu
    Hey guys, I've been beating my head against this absolutely infuriating bug for the last 48 hours, so I thought I'd finally throw in the towel and try asking here before I throw my laptop out the window. I'm trying to parse the response XML from a call I made to AWS SimpleDB. The response is coming back on the wire just fine; for example, it may look like: <?xml version="1.0" encoding="utf-8"?> <ListDomainsResponse xmlns="http://sdb.amazonaws.com/doc/2009-04-15/"> <ListDomainsResult> <DomainName>Audio</DomainName> <DomainName>Course</DomainName> <DomainName>DocumentContents</DomainName> <DomainName>LectureSet</DomainName> <DomainName>MetaData</DomainName> <DomainName>Professors</DomainName> <DomainName>Tag</DomainName> </ListDomainsResult> <ResponseMetadata> <RequestId>42330b4a-e134-6aec-e62a-5869ac2b4575</RequestId> <BoxUsage>0.0000071759</BoxUsage> </ResponseMetadata> </ListDomainsResponse> I pass in this XML to a parser with XMLEventReader eventReader = xmlInputFactory.createXMLEventReader(response.getContent()); and call eventReader.nextEvent(); a bunch of times to get the data I want. Here's the bizarre part -- it works great inside the local server. The response comes in, I parse it, everyone's happy. The problem is that when I deploy the code to Google App Engine, the outgoing request still works, and the response XML seems 100% identical and correct to me, but the response fails to parse with the following exception: com.amazonaws.http.HttpClient handleResponse: Unable to unmarshall response (ParseError at [row,col]:[1,1] Message: Content is not allowed in prolog.): <?xml version="1.0" encoding="utf-8"?> <ListDomainsResponse xmlns="http://sdb.amazonaws.com/doc/2009-04-15/"><ListDomainsResult><DomainName>Audio</DomainName><DomainName>Course</DomainName><DomainName>DocumentContents</DomainName><DomainName>LectureSet</DomainName><DomainName>MetaData</DomainName><DomainName>Professors</DomainName><DomainName>Tag</DomainName></ListDomainsResult><ResponseMetadata><RequestId>42330b4a-e134-6aec-e62a-5869ac2b4575</RequestId><BoxUsage>0.0000071759</BoxUsage></ResponseMetadata></ListDomainsResponse> javax.xml.stream.XMLStreamException: ParseError at [row,col]:[1,1] Message: Content is not allowed in prolog. at com.sun.org.apache.xerces.internal.impl.XMLStreamReaderImpl.next(Unknown Source) at com.sun.xml.internal.stream.XMLEventReaderImpl.nextEvent(Unknown Source) at com.amazonaws.transform.StaxUnmarshallerContext.nextEvent(StaxUnmarshallerContext.java:153) ... (rest of lines omitted) I have double, triple, quadruple checked this XML for 'invisible characters' or non-UTF8 encoded characters, etc. I looked at it byte-by-byte in an array for byte-order-marks or something of that nature. Nothing; it passes every validation test I could throw at it. Even stranger, it happens if I use a Saxon-based parser as well -- but ONLY on GAE, it always works fine in my local environment. It makes it very hard to trace the code for problems when I can only run the debugger on an environment that works perfectly (I haven't found any good way to remotely debug on GAE). Nevertheless, using the primitive means I have, I've tried a million approaches including: XML with and without the prolog With and without newlines With and without the "encoding=" attribute in the prolog Both newline styles With and without the chunking information present in the HTTP stream And I've tried most of these in multiple combinations where it made sense they would interact -- nothing! I'm at my wit's end. Has anyone seen an issue like this before that can hopefully shed some light on it? Thanks!

    Read the article

  • Errors rose when a Netbean Maven Project tries to run

    - by Zakaria
    Hi everybody, I installed NetBeans 6.8 on Vista and and I'm trying to execute a simple Maven Project. When I ran the project, I got this set of errors: WARNING: You are running embedded Maven builds, some build may fail due to incompatibilities with latest Maven release. To set Maven instance to use for building, click here. Scanning for projects... [#process-resources] [resources:resources] Using default encoding to copy filtered resources. [#compile] [compiler:compile] Nothing to compile - all classes are up to date [exec:exec] [EL Info]: 2010-04-04 18:22:54.907--ServerSession(15532856)--EclipseLink, version: Eclipse Persistence Services - 2.0.0.v20091127-r5931 [EL Severe]: 2010-04-04 18:22:54.929--ServerSession(15532856)--Local Exception Stack: Exception [EclipseLink-4003] (Eclipse Persistence Services - 2.0.0.v20091127-r5931): org.eclipse.persistence.exceptions.DatabaseException Exception in thread "main" javax.persistence.PersistenceException: Exception [EclipseLink-4003] (Eclipse Persistence Services - 2.0.0.v20091127-r5931): org.eclipse.persistence.exceptions.DatabaseException Exception Description: Configuration error. Class [org.apache.derby.jdbc.ClientDriver] not found. Exception Description: Configuration error. Class [org.apache.derby.jdbc.ClientDriver] not found. at org.eclipse.persistence.exceptions.DatabaseException.configurationErrorClassNotFound(DatabaseException.java:82) at org.eclipse.persistence.sessions.DefaultConnector.loadDriverClass(DefaultConnector.java:267) at org.eclipse.persistence.sessions.DefaultConnector.connect(DefaultConnector.java:85) at org.eclipse.persistence.internal.jpa.EntityManagerSetupImpl.deploy(EntityManagerSetupImpl.java:392) at org.eclipse.persistence.sessions.DatasourceLogin.connectToDatasource(DatasourceLogin.java:162) at org.eclipse.persistence.internal.jpa.EntityManagerFactoryImpl.getServerSession(EntityManagerFactoryImpl.java:151) at org.eclipse.persistence.internal.sessions.DatabaseSessionImpl.loginAndDetectDatasource(DatabaseSessionImpl.java:584) at org.eclipse.persistence.internal.jpa.EntityManagerFactoryImpl.createEntityManagerImpl(EntityManagerFactoryImpl.java:207) at org.eclipse.persistence.internal.jpa.EntityManagerFactoryProvider.login(EntityManagerFactoryProvider.java:228) at org.eclipse.persistence.internal.jpa.EntityManagerFactoryImpl.createEntityManager(EntityManagerFactoryImpl.java:195) at com.mycompany.chapter2_ex1.Main.main(Main.java:31) Caused by: Exception [EclipseLink-4003] (Eclipse Persistence Services - 2.0.0.v20091127-r5931): org.eclipse.persistence.exceptions.DatabaseException Exception Description: Configuration error. Class [org.apache.derby.jdbc.ClientDriver] not found. at org.eclipse.persistence.internal.jpa.EntityManagerSetupImpl.deploy(EntityManagerSetupImpl.java:368) at org.eclipse.persistence.exceptions.DatabaseException.configurationErrorClassNotFound(DatabaseException.java:82) at org.eclipse.persistence.internal.jpa.EntityManagerFactoryImpl.getServerSession(EntityManagerFactoryImpl.java:151) at org.eclipse.persistence.sessions.DefaultConnector.loadDriverClass(DefaultConnector.java:267) at org.eclipse.persistence.internal.jpa.EntityManagerFactoryImpl.createEntityManagerImpl(EntityManagerFactoryImpl.java:207) at org.eclipse.persistence.sessions.DefaultConnector.connect(DefaultConnector.java:85) at org.eclipse.persistence.internal.jpa.EntityManagerFactoryImpl.createEntityManager(EntityManagerFactoryImpl.java:195) at org.eclipse.persistence.sessions.DatasourceLogin.connectToDatasource(DatasourceLogin.java:162) at com.mycompany.chapter2_ex1.Main.main(Main.java:31) at org.eclipse.persistence.internal.sessions.DatabaseSessionImpl.loginAndDetectDatasource(DatabaseSessionImpl.java:584) at org.eclipse.persistence.internal.jpa.EntityManagerFactoryProvider.login(EntityManagerFactoryProvider.java:228) at org.eclipse.persistence.internal.jpa.EntityManagerSetupImpl.deploy(EntityManagerSetupImpl.java:368) ... 4 more [ERROR]The following mojo encountered an error while executing: [ERROR]Group-Id: org.codehaus.mojo [ERROR]Artifact-Id: exec-maven-plugin [ERROR]Version: 1.1.1 [ERROR]Mojo: exec [ERROR]brought in via: Direct invocation [ERROR]While building project: [ERROR]Group-Id: com.mycompany [ERROR]Artifact-Id: chapter2_ex1 [ERROR]Version: 1.0-SNAPSHOT [ERROR]From file: C:\Users\Charlotte\Documents\NetBeansProjects\chapter2_ex1\pom.xml [ERROR]Reason: Result of cmd.exe /X /C ""C:\Program Files\Java\jdk1.6.0_11\bin\java.exe" -classpath C:\Users\Charlotte\Documents\NetBeansProjects\chapter2_ex1\target\classes;C:\Users\Charlotte\.m2\repository\javax\persistence\persistence-api\1.0\persistence-api-1.0.jar;C:\Users\Charlotte\.m2\repository\org\eclipse\persistence\javax.persistence\2.0.0\javax.persistence-2.0.0.jar;C:\Users\Charlotte\.m2\repository\org\eclipse\persistence\eclipselink\2.0.0-RC1\eclipselink-2.0.0-RC1.jar com.mycompany.chapter2_ex1.Main" execution is: '1'. ------------------------------------------------------------------------ For more information, run with the -e flag ------------------------------------------------------------------------ BUILD FAILED ------------------------------------------------------------------------ Total time: 3 seconds Finished at: Sun Apr 04 18:22:55 CEST 2010 Final Memory: 47M/94M ------------------------------------------------------------------------ Theses exceptions rose even if I can run the database by using the console (ij) and when I connect the Database, no errors are showing. Can you help me please? Thank you very much. Regards.

    Read the article

  • How to group using XSLT

    - by AdRock
    I'm having trouble grouping a set of nodes. I've found an article that does work with grouping and i have tested it and it works on a small test stylesheet i have I now need to use it in my stylesheet where I only want to select node sets that have a specific value. What I want to do in my stylesheet is select all users who have a userlevel of 2 then to group them by the volunteer region. What happens at the minute is that it gets the right amount of users with userlevel 2 but doesn't print them. It just repeats the first user in the xml file. <?xml version="1.0" encoding="ISO-8859-1"?> <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"> <xsl:key name="volunteers-by-region" match="volunteer" use="region" /> <xsl:template name="hoo" match="/"> <html> <head> <title>Registered Volunteers</title> <link rel="stylesheet" type="text/css" href="volunteer.css" /> </head> <body> <h1>Registered Volunteers</h1> <h3>Ordered by the username ascending</h3> <xsl:for-each select="folktask/member[user/account/userlevel='2']"> <xsl:for-each select="volunteer[count(. | key('volunteers-by-region', region)[1]) = 1]"> <xsl:sort select="region" /> <xsl:for-each select="key('volunteers-by-region', region)"> <xsl:sort select="folktask/member/user/personal/name" /> <div class="userdiv"> <xsl:call-template name="member_userid"> <xsl:with-param name="myid" select="/folktask/member/user/@id" /> </xsl:call-template> <xsl:call-template name="volunteer_volid"> <xsl:with-param name="volid" select="/folktask/member/volunteer/@id" /> </xsl:call-template> <xsl:call-template name="volunteer_role"> <xsl:with-param name="volrole" select="/folktask/member/volunteer/roles" /> </xsl:call-template> <xsl:call-template name="volunteer_region"> <xsl:with-param name="volloc" select="/folktask/member/volunteer/region" /> </xsl:call-template> </div> </xsl:for-each> </xsl:for-each> </xsl:for-each> <xsl:if test="position()=last()"> <div class="count"><h2>Total number of volunteers: <xsl:value-of select="count(/folktask/member/user/account/userlevel[text()=2])"/></h2></div> </xsl:if> </body> </html> </xsl:template> <xsl:template name="member_userid"> <xsl:param name="myid" select="'Not Available'" /> <div class="heading bold"><h2>USER ID: <xsl:value-of select="$myid" /></h2></div> </xsl:template> <xsl:template name="volunteer_volid"> <xsl:param name="volid" select="'Not Available'" /> <div class="heading2 bold"><h2>VOLUNTEER ID: <xsl:value-of select="$volid" /></h2></div> </xsl:template> <xsl:template name="volunteer_role"> <xsl:param name="volrole" select="'Not Available'" /> <div class="small bold">ROLES:</div> <div class="large"> <xsl:choose> <xsl:when test="string-length($volrole)!=0"> <xsl:value-of select="$volrole" /> </xsl:when> <xsl:otherwise> <xsl:text> </xsl:text> </xsl:otherwise> </xsl:choose> </div> </xsl:template> <xsl:template name="volunteer_region"> <xsl:param name="volloc" select="'Not Available'" /> <div class="small bold">REGION:</div> <div class="large"><xsl:value-of select="$volloc" /></div> </xsl:template> </xsl:stylesheet> here is my full xml file <?xml version="1.0" encoding="ISO-8859-1" ?> <?xml-stylesheet type="text/xsl" href="volunteers.xsl"?> <folktask xmlns:xs="http://www.w3.org/2001/XMLSchema-instance" xs:noNamespaceSchemaLocation="folktask.xsd"> <member> <user id="1"> <personal> <name>Abbie Hunt</name> <sex>Female</sex> <address1>108 Access Road</address1> <address2></address2> <city>Wells</city> <county>Somerset</county> <postcode>BA5 8GH</postcode> <telephone>01528927616</telephone> <mobile>07085252492</mobile> <email>[email protected]</email> </personal> <account> <username>AdRock</username> <password>269eb625e2f0cf6fae9a29434c12a89f</password> <userlevel>4</userlevel> <signupdate>2010-03-26T09:23:50</signupdate> </account> </user> <volunteer id="1"> <roles></roles> <region>South West</region> </volunteer> </member> <member> <user id="2"> <personal> <name>Aidan Harris</name> <sex>Male</sex> <address1>103 Aiken Street</address1> <address2></address2> <city>Chichester</city> <county>Sussex</county> <postcode>PO19 4DS</postcode> <telephone>01905149894</telephone> <mobile>07784467941</mobile> <email>[email protected]</email> </personal> <account> <username>AmbientExpert</username> <password>8e64214160e9dd14ae2a6d9f700004a6</password> <userlevel>2</userlevel> <signupdate>2010-03-26T09:23:50</signupdate> </account> </user> <volunteer id="2"> <roles>Van Driver,gas Fitter</roles> <region>South Central</region> </volunteer> </member> <member> <user id="3"> <personal> <name>Skye Saunders</name> <sex>Female</sex> <address1>31 Anns Court</address1> <address2></address2> <city>Cirencester</city> <county>Gloucestershire</county> <postcode>GL7 1JG</postcode> <telephone>01958303514</telephone> <mobile>07260491667</mobile> <email>[email protected]</email> </personal> <account> <username>BigUndecided</username> <password>ea297847f80e046ca24a8621f4068594</password> <userlevel>2</userlevel> <signupdate>2010-03-26T09:23:50</signupdate> </account> </user> <volunteer id="3"> <roles>Scaffold Erector</roles> <region>South West</region> </volunteer> </member> <member> <user id="4"> <personal> <name>Connor Lawson</name> <sex>Male</sex> <address1>12 Ash Way</address1> <address2></address2> <city>Swindon</city> <county>Wiltshire</county> <postcode>SN3 6GS</postcode> <telephone>01791928119</telephone> <mobile>07338695664</mobile> <email>[email protected]</email> </personal> <account> <username>iTuneStinker</username> <password>3a1f5fda21a07bfff20c41272bae7192</password> <userlevel>3</userlevel> <signupdate>2010-03-26T09:23:50</signupdate> </account> </user> <festival id="1"> <event> <eventname>Oxford Folk Festival</eventname> <url>http://www.oxfordfolkfestival.com/</url> <datefrom>2010-04-07</datefrom> <dateto>2010-04-09</dateto> <location>Oxford</location> <eventpostcode>OX1 9BE</eventpostcode> <additional>Oxford Folk Festival is going into it's third year in 2006. As well as needing volunteers to steward for the event on the weekend itself, we would be delighted to hear from people willing to help in year round festival work such as stuffing envelopes for mailings, poster and leaflet distribution, and stewarding duties at festival pre-events.</additional> <coords> <lat>51.735640</lat> <lng>-1.276136</lng> </coords> </event> <contact> <conname>Stuart Vincent</conname> <conaddress1>P.O. Box 642</conaddress1> <conaddress2></conaddress2> <concity>Oxford</concity> <concounty>Bedfordshire</concounty> <conpostcode>OX1 3BY</conpostcode> <contelephone>01865 79073</contelephone> <conmobile></conmobile> <fax></fax> <conemail>[email protected]</conemail> </contact> </festival> </member> <member> <user id="5"> <personal> <name>Lewis King</name> <sex>Male</sex> <address1>67 Arbors Way</address1> <address2></address2> <city>Sherborne</city> <county>Dorset</county> <postcode>DT9 0GS</postcode> <telephone>01446139701</telephone> <mobile>07292614033</mobile> <email>[email protected]</email> </personal> <account> <username>Runninglife</username> <password>98fab0a27c34ddb2b0618bc184d4331d</password> <userlevel>2</userlevel> <signupdate>2010-03-26T09:23:50</signupdate> </account> </user> <volunteer id="4"> <roles>Van Driver</roles> <region>South West</region> </volunteer> </member> <member> <user id="6"> <personal> <name>Cameron Lee</name> <sex>Male</sex> <address1>77 Arrington Road</address1> <address2></address2> <city>Solihull</city> <county>Warwickshire</county> <postcode>B90 6FG</postcode> <telephone>01435158624</telephone> <mobile>07789503179</mobile> <email>[email protected]</email> </personal> <account> <username>love2Mixer</username> <password>1df752d54876928639cea07ce036a9c0</password> <userlevel>2</userlevel> <signupdate>2010-03-26T09:23:50</signupdate> </account> </user> <volunteer id="5"> <roles>Fire Warden</roles> <region>Midlands</region> </volunteer> </member> <member> <user id="7"> <personal> <name>Lexie Dean</name> <sex>Female</sex> <address1>38 Bloomfield Court</address1> <address2></address2> <city>Windermere</city> <county>Westmorland</county> <postcode>LA23 8BM</postcode> <telephone>01781207188</telephone> <mobile>07127461231</mobile> <email>[email protected]</email> </personal> <account> <username>MailNetworker</username> <password>0e070701839e612bf46af4421db4f44b</password> <userlevel>3</userlevel> <signupdate>2010-03-26T09:23:50</signupdate> </account> </user> <festival id="2"> <event> <eventname>Middlewich Folk And Boat Festival</eventname> <url>http://midfest.org.uk/mfab/</url> <datefrom>2010-06-16</datefrom> <dateto>2010-06-18</dateto> <location>Middlewich</location> <eventpostcode>CW10 9BX</eventpostcode> <additional>We welcome stewards staying on campsite or boats.</additional> <coords> <lat>53.190562</lat> <lng>-2.444926</lng> </coords> </event> <contact> <conname>Festival Committee</conname> <conaddress1>PO Box 141</conaddress1> <conaddress2></conaddress2> <concity>Winsford</concity> <concounty>Cheshire</concounty> <conpostcode>CW10 9WB</conpostcode> <contelephone>07092 39050</contelephone> <conmobile>07092 39050</conmobile> <fax></fax> <conemail>[email protected]</conemail> </contact> </festival> </member> <member> <user id="8"> <personal> <name>Liam Chapman</name> <sex>Male</sex> <address1>99 Black Water Drive</address1> <address2></address2> <city>St.Austell</city> <county>Cornwall</county> <postcode>PL25 3GF</postcode> <telephone>01835629418</telephone> <mobile>07695179069</mobile> <email>[email protected]</email> </personal> <account> <username>GreenWimp</username> <password>1fe3df99a841dc4f723d21af89e0990f</password> <userlevel>1</userlevel> <signupdate>2010-03-26T09:23:50</signupdate> </account> </user> </member> <member> <user id="9"> <personal> <name>Brandon Harrison</name> <sex>Male</sex> <address1>41 Arlington Way</address1> <address2></address2> <city>Dorchester</city> <county>Dorset</county> <postcode>DT1 3JS</postcode> <telephone>01293626735</telephone> <mobile>07277145760</mobile> <email>[email protected]</email> </personal> <account> <username>LovelyStar</username> <password>8b53b66f323aa5e6a083edb4fd44456b</password> <userlevel>1</userlevel> <signupdate>2010-03-26T09:23:50</signupdate> </account> </user> </member> <member> <user id="10"> <personal> <name>Samuel Young</name> <sex>Male</sex> <address1>102 Bailey Hill Road</address1> <address2></address2> <city>Wolverhampton</city> <county>Staffordshire</county> <postcode>WV7 8HS</postcode> <telephone>01594531382</telephone> <mobile>07544663654</mobile> <email>[email protected]</email> </personal> <account> <username>GuruSassy</username> <password>00da02da6c143c3d136bf60b8bfcf43e</password> <userlevel>2</userlevel> <signupdate>2010-03-26T09:23:50</signupdate> </account> </user> <volunteer id="6"> <roles>Fire Warden</roles> <region>Midlands</region> </volunteer> </member> <member> <user id="11"> <personal> <name>Alexander Harris</name> <sex>Male</sex> <address1>93 Beguine Drive</address1> <address2></address2> <city>Winchester</city> <county>Hampshire</county> <postcode>S23 2FD</postcode> <telephone>01452496582</telephone> <mobile>07353867291</mobile> <email>[email protected]</email> </personal> <account> <username>GuitarExpert</username> <password>0102ad3740028e155925e9918ead3bde</password> <userlevel>2</userlevel> <signupdate>2010-03-26T09:23:50</signupdate> </account> </user> <volunteer id="7"> <roles>Scaffold Erector</roles> <region>North East</region> </volunteer> </member> <member> <user id="12"> <personal> <name>Tyler Mcdonald</name> <sex>Male</sex> <address1>44 Baker Road</address1> <address2></address2> <city>Bromley</city> <county>Kent</county> <postcode>BR1 2GD</postcode> <telephone>01918704546</telephone> <mobile>07314062451</mobile> <email>[email protected]</email> </personal> <account> <username>WildWish</username> <password>073220bb5e9a12ad202bb7d94dcc86f7</password> <userlevel>1</userlevel> <signupdate>2010-03-26T09:23:50</signupdate> </account> </user> </member> <member> <user id="13"> <personal> <name>Skye Mason</name> <sex>Female</sex> <address1>56 Cedar Creek Church Road</address1> <address2></address2> <city>Bracknell</city> <county>Berkshire</county> <postcode>RG12 1AQ</postcode> <telephone>01787607618</telephone> <mobile>07540218868</mobile> <email>[email protected]</email> </personal> <account> <username>PizzaDork</username> <password>74c54937ee7051ee7f4ebc11296ed531</password> <userlevel>1</userlevel> <signupdate>2010-03-26T09:23:50</signupdate> </account> </user> </member> <member> <user id="14"> <personal> <name>Maryam Rose</name> <sex>Female</sex> <address1>98 Baptist Circle</address1> <address2></address2> <city>Newbury</city> <county>Berkshire</county> <postcode>RG14 8DF</postcode> <telephone>01691317999</telephone> <mobile>07212477154</mobile> <email>[email protected]</email> </personal> <account> <username>SexTech</username> <password>f1c21f9f1e999da97d7dc460bb876fcf</password> <userlevel>3</userlevel> <signupdate>2010-03-26T09:23:50</signupdate> </account> </user> <festival id="3"> <event> <eventname>Birdsedge Village Festival</eventname> <url>http://www.birdsedge.co.uk/</url> <datefrom>2010-07-08</datefrom> <dateto>2010-07-09</dateto> <location>Birdsedge</location> <eventpostcode>HD8 8XT</eventpostcode> <additional></additional> <coords> <lat>53.565644</lat> <lng>-1.696196</lng> </coords> </event> <contact> <conname>Jacey Bedford</conname> <conaddress1>Penistone Road</conaddress1> <conaddress2>Birdsedge</conaddress2> <concity>Huddersfield</concity> <concounty>West Yorkshire</concounty> <conpostcode>HD8 8XT</conpostcode> <contelephone>01484 60623</contelephone> <conmobile></conmobile> <fax></fax> <conemail>[email protected]</conemail> </contact> </festival> </member> <member> <user id="15"> <personal> <name>Lexie Rogers</name> <sex>Female</sex> <address1>38 Bishop Road</address1> <address2></address2> <city>Matlock</city> <county>Derbyshire</county> <postcode>DE4 1BX</postcode> <telephone>01961168823</telephone> <mobile>07170855351</mobile> <email>[email protected]</email> </personal> <account> <username>ShipBurglar</username> <password>cc190488a95667cb117e20bc6c7c330e</password> <userlevel>2</userlevel> <signupdate>2010-03-26T09:23:50</signupdate> </account> </user> <volunteer id="8"> <roles>Gas Fitter</roles> <region>Midlands</region> </volunteer> </member> <member> <user id="16"> <personal> <name>Noah Parker</name> <sex>Male</sex> <address1>112 Canty Road</address1> <address2></address2> <city>Keswick</city> <county>Cumberland</county> <postcode>CA12 4TR</postcode> <telephone>01931272522</telephone> <mobile>07610026576</mobile> <email>[email protected]</email> </personal> <account> <username>AwsomeMoon</username> <password>50b770539bdf08543f15778fc7a6f188</password> <userlevel>2</userlevel> <signupdate>2010-03-26T09:23:50</signupdate> </account> </user> <volunteer id="9"> <roles>Van Driver</roles> <region>North West</region> </volunteer> </member> <member> <user id="17"> <personal> <name>Elliot Mitchell</name> <sex>Male</sex> <address1>102 Brown Loop</address1> <address2></address2> <city>Grimsby</city> <county>Lincolnshire</county> <postcode>OX16 4QP</postcode> <telephone>01212971319</telephone> <mobile>07544663654</mobile> <email>[email protected]</email> </personal> <account> <username>msBasher</username> <password>c38fad85badcdff6e3559ef38656305d</password> <userlevel>1</userlevel> <signupdate>2010-03-26T09:23:50</signupdate> </account> </user> </member> <member> <user id="18"> <personal> <name>Scarlett Rose</name> <sex>Female</sex> <address1>93 Cedar Lane</address1> <address2></address2> <city>Stourbridge</city> <county>Warminster</county> <postcode>DY8 4NX</postcode> <telephone>01537477435</telephone> <mobile>07353867291</mobile> <email>[email protected]</email> </personal> <account> <username>MakeupWimp</username> <password>16a9b7910fc34304c1d1a6a1b0c31502</password> <userlevel>1</userlevel> <signupdate>2010-03-26T09:23:50</signupdate> </account> </user> </member> <member> <user id="19"> <personal> <name>Katie Butler</name> <sex>Female</sex> <address1>44 Boulder Crest Road</address1> <address2></address2> <city>Bungay</city> <county>Suffolk</county> <postcode>NR35 1LT</postcode> <telephone>01419124094</telephone> <mobile>07314062451</mobile> <email>[email protected]</email> </personal> <account> <username>TomatoCrunch</username> <password>d7eba53443ec4ddcee69ed71b2023fc0</password> <userlevel>1</userlevel> <signupdate>2010-03-26T09:23:50</signupdate> </account> </user> </member> <member> <user id="20"> <personal> <name>Jayden Richards</name> <sex>Male</sex> <address1>56 Corson Trail</address1> <address2></address2> <city>Sandy</city> <county>Bedfordshire</county> <postcode>SG19 6DF</postcode> <telephone>01882134438</telephone> <mobile>07540218868</mobile> <email>[email protected]</email> </personal> <account> <username>nightmareTwig</username> <password>8a9c08c7b6473493e8a5da15dd541025</password> <userlevel>3</userlevel> <signupdate>2010-03-26T09:23:50</signupdate> </account> </user> <festival id="4"> <event> <eventname>East Barnet Festival</eventname> <url>http://www.eastbarnetfestival.org.uk</url> <datefrom>2010-07-01</datefrom> <dateto>2010-07-03</dateto> <location>East Barnet</location> <eventpostcode>EN4 8TB</eventpostcode> <additional></additional> <coords> <lat>51.641556</lat> <lng>-0.163018</lng> </coords> </event> <contact> <conname>East Barnet Festival Commitee</conname> <conaddress1>Oak Hill Park</conaddress1> <conaddress2>Church Hill Road</conaddress2> <concity>East Barnet</concity> <concounty>Hertfordshire</concounty> <conpostcode>EN4 8TB</conpostcode> <contelephone>07071781745</contelephone> <conmobile>07071781745</conmobile> <fax></fax> <conemail>[email protected]</conemail> </contact> </festival> </member> <member> <user id="21"> <personal> <name>Abbie Jackson</name> <sex>Female</sex> <address1>98 Briarwood Lane</address1> <address2></address2> <city>Weymouth</city> <county>Dorset</county> <postcode>DT3 6TS</postcode> <telephone>01575629969</telephone> <mobile>07212477154</mobile> <email>[email protected]</email> </personal> <account> <username>CrazyBlockhead</username> <password>4ce56fb13d043be605037ace4fbd9fa5</password> <userlevel>2</u

    Read the article

  • rank on two dates - each date iteratively

    - by Abhi
    How to query for rank over 'value' for each day in the below table? Ex: IT should list out the 'mydate', 'value', 'rank' for all values on 20th and then do a fresh rank() for all values on 21st? Thanks... create table tv (mydate,value) as select to_date('20/03/2010 00','dd/mm/yyyy HH24'),98 from dual union all select to_date('20/03/2010 01','dd/mm/yyyy HH24'),124 from dual union all select to_date('20/03/2010 02','dd/mm/yyyy HH24'),140 from dual union all select to_date('20/03/2010 03','dd/mm/yyyy HH24'),138 from dual union all select to_date('20/03/2010 04','dd/mm/yyyy HH24'),416 from dual union all select to_date('20/03/2010 05','dd/mm/yyyy HH24'),196 from dual union all select to_date('20/03/2010 06','dd/mm/yyyy HH24'),246 from dual union all select to_date('20/03/2010 07','dd/mm/yyyy HH24'),176 from dual union all select to_date('20/03/2010 08','dd/mm/yyyy HH24'),124 from dual union all select to_date('20/03/2010 09','dd/mm/yyyy HH24'),128 from dual union all select to_date('20/03/2010 10','dd/mm/yyyy HH24'),32010 from dual union all select to_date('20/03/2010 11','dd/mm/yyyy HH24'),384 from dual union all select to_date('20/03/2010 12','dd/mm/yyyy HH24'),368 from dual union all select to_date('20/03/2010 13','dd/mm/yyyy HH24'),392 from dual union all select to_date('20/03/2010 14','dd/mm/yyyy HH24'),374 from dual union all select to_date('20/03/2010 15','dd/mm/yyyy HH24'),350 from dual union all select to_date('20/03/2010 16','dd/mm/yyyy HH24'),248 from dual union all select to_date('20/03/2010 17','dd/mm/yyyy HH24'),396 from dual union all select to_date('20/03/2010 18','dd/mm/yyyy HH24'),388 from dual union all select to_date('20/03/2010 19','dd/mm/yyyy HH24'),360 from dual union all select to_date('20/03/2010 20','dd/mm/yyyy HH24'),194 from dual union all select to_date('20/03/2010 21','dd/mm/yyyy HH24'),234 from dual union all select to_date('20/03/2010 22','dd/mm/yyyy HH24'),328 from dual union all select to_date('20/03/2010 23','dd/mm/yyyy HH24'),216 from dual union all select to_date('21/03/10 00','dd/mm/yyyy HH24'),224 from dual union all select to_date('21/03/10 01','dd/mm/yyyy HH24'),292 from dual union all select to_date('21/03/10 02','dd/mm/yyyy HH24'),264 from dual union all select to_date('21/03/10 03','dd/mm/yyyy HH24'),132 from dual union all select to_date('21/03/10 04','dd/mm/yyyy HH24'),142 from dual union all select to_date('21/03/10 05','dd/mm/yyyy HH24'),328 from dual union all select to_date('21/03/10 06','dd/mm/yyyy HH24'),184 from dual union all select to_date('21/03/10 07','dd/mm/yyyy HH24'),240 from dual union all select to_date('21/03/10 08','dd/mm/yyyy HH24'),224 from dual union all select to_date('21/03/10 09','dd/mm/yyyy HH24'),496 from dual union all select to_date('21/03/10 10','dd/mm/yyyy HH24'),370 from dual union all select to_date('21/03/10 11','dd/mm/yyyy HH24'),352 from dual union all select to_date('21/03/10 12','dd/mm/yyyy HH24'),438 from dual union all select to_date('21/03/10 13','dd/mm/yyyy HH24'),446 from dual union all select to_date('21/03/10 14','dd/mm/yyyy HH24'),426 from dual union all select to_date('21/03/10 15','dd/mm/yyyy HH24'),546 from dual union all select to_date('21/03/10 16','dd/mm/yyyy HH24'),546 from dual union all select to_date('21/03/10 17','dd/mm/yyyy HH24'),684 from dual union all select to_date('21/03/10 18','dd/mm/yyyy HH24'),568 from dual union all select to_date('21/03/10 19','dd/mm/yyyy HH24'),504 from dual union all select to_date('21/03/10 20','dd/mm/yyyy HH24'),392 from dual union all select to_date('21/03/10 21','dd/mm/yyyy HH24'),256 from dual union all select to_date('21/03/10 22','dd/mm/yyyy HH24'),236 from dual union all select to_date('21/03/10 23','dd/mm/yyyy HH24'),168 from dual

    Read the article

  • Android using ksoap calling PHP SOAP webservice fails: 'procedure 'CheckLogin' not found

    - by AmazingDreams
    I'm trying to call a PHP SOAP webservice. I know my webservice functions correctly because I use it in a WPF project succesfully. I'm also building an app in android, using the same webservice. The WSDL file can be found here: http://www.wegotcha.nl/servicehandler/service.wsdl This is my code in the android app: String SOAP_ACTION = "http://www.wegotcha.nl/servicehandler/CheckLogin"; String NAMESPACE = "http://www.wegotcha.nl/servicehandler"; String METHOD_NAME = "CheckLogin"; String URL = "http://www.wegotcha.nl/servicehandler/servicehandler.php"; String resultData = ""; SoapSerializationEnvelope soapEnv = new SoapSerializationEnvelope(SoapEnvelope.VER11); SoapObject request = new SoapObject(NAMESPACE, METHOD_NAME); SoapObject UserCredentials = new SoapObject("Types", "UserCredentials6"); UserCredentials.addProperty("mail", params[0]); UserCredentials.addProperty("password", md5(params[1])); request.addSoapObject(UserCredentials); soapEnv.setOutputSoapObject(request); HttpTransportSE http = new HttpTransportSE(URL); http.setXmlVersionTag("<?xml version=\"1.0\" encoding=\"utf-8\"?>"); http.debug = true; try { http.call(SOAP_ACTION, soapEnv); } catch (IOException e) { e.printStackTrace(); } catch (XmlPullParserException e) { e.printStackTrace(); } SoapObject results = null; results = (SoapObject)soapEnv.bodyOut; if(results != null) resultData = results.getProperty(0).toString(); return resultData; Using fiddler I got the following: Android request: <?xml version="1.0" encoding="utf-8"?> <v:Envelope xmlns:i="http://www.w3.org/2001/XMLSchema-instance" xmlns:d="http://www.w3.org/2001/XMLSchema" xmlns:c="http://schemas.xmlsoap.org/soap/encoding/" xmlns:v="http://schemas.xmlsoap.org/soap/envelope/"><v:Header /> <v:Body> <n0:CheckLogin id="o0" c:root="1" xmlns:n0="http://www.wegotcha.nl/servicehandler"> <n1:UserCredentials6 i:type="n1:UserCredentials6" xmlns:n1="Types"> <mail i:type="d:string">myemail</mail> <password i:type="d:string">myhashedpass</password> </n1:UserCredentials6> </n0:CheckLogin> </v:Body> </v:Envelope> Getting the following response: Procedure 'CheckLogin' not present My request produced by my WPF app looks completely different: <s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/"> <s:Body xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"> <UserCredentials6 xmlns="Types"> <mail>mymail</mail> <password>mypassword</password> </UserCredentials6> </s:Body> </s:Envelope> After googling my ass off I was not able to solve this problem by myself. It may be possible there are some weird things in my Java code because I changed a lot since. I hope you guys will be able to help me, thanks. EDIT: My webservice is of document/literal encoding style, after doing some research I found I should be able to use SoepEnvelope Instead of SoapSerializationEnvelope Though when I replace this I get an error before the try cache block, causing my app to crash. Error: 11-04 16:23:26.786: E/AndroidRuntime(26447): Caused by: java.lang.ClassCastException: org.ksoap2.serialization.SoapObject cannot be cast to org.kxml2.kdom.Node Which is caused by these lines: request.addSoapObject(UserCredentials); soapEnv.setOutputSoapObject(request); This may be a solution though, how do I go about this? I found nothing about using a SoapEnvelope instead of a SoapSerializationEnvelope except for this awesome tutorial: http://ksoap.objectweb.org/project/mailingLists/ksoap/msg00849.html

    Read the article

< Previous Page | 332 333 334 335 336 337 338 339 340 341 342 343  | Next Page >