Search Results

Search found 12768 results on 511 pages for 'little snitch'.

Page 336/511 | < Previous Page | 332 333 334 335 336 337 338 339 340 341 342 343  | Next Page >

• Changing externally visible IP on a multi-IP router?

  - by AlternateZ

  I work at a public library and I'm trying to configure OCLC's EzProxy software. I've run into a problem and I think it's related to our network config. I'm punching above my weight here a little so I need some help. I think I'm trying to configure a 1:1 NAT, but not sure how or if our hardware supports it. The EzProxy machine is on an internet line which supports multiple external IPs. Our router is a Billion BiGuard30. There's another server on this line, let's say its IP is x.x.x.9. The EzProxy machine is x.x.x.11 I've set up port forwarding from x.x.x.11 on the http ports to the EzProxy machine. Trying to browse to x.x.x.11 from an external PC works fine - we get to the EzProxy page we are serving. However, if we go to something like WhatIsMyIP from the EzProxy machine, it says that its IP is x.x.x.9. This causes problems with our user authentication software. How do we make the rest of the internet see that the machine is x.x.x.11? There doesnt seem to be any "outbound port forwarding" on the Billion router, nor is there any "1:1 NAT" options in its config webpage. The EzProxy machine is running Ubuntu 12.04, if that helps.

  Read the article

• Is there a tool that can test what SSL/TLS cipher suites a particular website offers?

  - by Jeremy Powell

  Is there a tool that can test what SSL/TLS cipher suites a particular website offers? I've tried openssl, but if you examine the output: $ echo -n | openssl s_client -connect www.google.com:443 CONNECTED(00000003) depth=1 /C=ZA/O=Thawte Consulting (Pty) Ltd./CN=Thawte SGC CA verify error:num=20:unable to get local issuer certificate verify return:0 --- Certificate chain 0 s:/C=US/ST=California/L=Mountain View/O=Google Inc/CN=www.google.com i:/C=ZA/O=Thawte Consulting (Pty) Ltd./CN=Thawte SGC CA 1 s:/C=ZA/O=Thawte Consulting (Pty) Ltd./CN=Thawte SGC CA i:/C=US/O=VeriSign, Inc./OU=Class 3 Public Primary Certification Authority --- Server certificate -----BEGIN CERTIFICATE----- MIIDITCCAoqgAwIBAgIQL9+89q6RUm0PmqPfQDQ+mjANBgkqhkiG9w0BAQUFADBM MQswCQYDVQQGEwJaQTElMCMGA1UEChMcVGhhd3RlIENvbnN1bHRpbmcgKFB0eSkg THRkLjEWMBQGA1UEAxMNVGhhd3RlIFNHQyBDQTAeFw0wOTEyMTgwMDAwMDBaFw0x MTEyMTgyMzU5NTlaMGgxCzAJBgNVBAYTAlVTMRMwEQYDVQQIEwpDYWxpZm9ybmlh MRYwFAYDVQQHFA1Nb3VudGFpbiBWaWV3MRMwEQYDVQQKFApHb29nbGUgSW5jMRcw FQYDVQQDFA53d3cuZ29vZ2xlLmNvbTCBnzANBgkqhkiG9w0BAQEFAAOBjQAwgYkC gYEA6PmGD5D6htffvXImttdEAoN4c9kCKO+IRTn7EOh8rqk41XXGOOsKFQebg+jN gtXj9xVoRaELGYW84u+E593y17iYwqG7tcFR39SDAqc9BkJb4SLD3muFXxzW2k6L 05vuuWciKh0R73mkszeK9P4Y/bz5RiNQl/Os/CRGK1w7t0UCAwEAAaOB5zCB5DAM BgNVHRMBAf8EAjAAMDYGA1UdHwQvMC0wK6ApoCeGJWh0dHA6Ly9jcmwudGhhd3Rl LmNvbS9UaGF3dGVTR0NDQS5jcmwwKAYDVR0lBCEwHwYIKwYBBQUHAwEGCCsGAQUF BwMCBglghkgBhvhCBAEwcgYIKwYBBQUHAQEEZjBkMCIGCCsGAQUFBzABhhZodHRw Oi8vb2NzcC50aGF3dGUuY29tMD4GCCsGAQUFBzAChjJodHRwOi8vd3d3LnRoYXd0 ZS5jb20vcmVwb3NpdG9yeS9UaGF3dGVfU0dDX0NBLmNydDANBgkqhkiG9w0BAQUF AAOBgQCfQ89bxFApsb/isJr/aiEdLRLDLE5a+RLizrmCUi3nHX4adpaQedEkUjh5 u2ONgJd8IyAPkU0Wueru9G2Jysa9zCRo1kNbzipYvzwY4OA8Ys+WAi0oR1A04Se6 z5nRUP8pJcA2NhUzUnC+MY+f6H/nEQyNv4SgQhqAibAxWEEHXw== -----END CERTIFICATE----- subject=/C=US/ST=California/L=Mountain View/O=Google Inc/CN=www.google.com issuer=/C=ZA/O=Thawte Consulting (Pty) Ltd./CN=Thawte SGC CA --- No client certificate CA names sent --- SSL handshake has read 1777 bytes and written 316 bytes --- New, TLSv1/SSLv3, Cipher is AES256-SHA Server public key is 1024 bit Compression: NONE Expansion: NONE SSL-Session: Protocol : TLSv1 Cipher : AES256-SHA Session-ID: 748E2B5FEFF9EA065DA2F04A06FBF456502F3E64DF1B4FF054F54817C473270C Session-ID-ctx: Master-Key: C4284AE7D76421F782A822B3780FA9677A726A25E1258160CA30D346D65C5F4049DA3D10A41F3FA4816DD9606197FAE5 Key-Arg : None Start Time: 1266259321 Timeout : 300 (sec) Verify return code: 20 (unable to get local issuer certificate) --- it just shows that the cipher suite is something with AES256-SHA. I know I could grep through the hex dump of the conversation, but I was hoping for something a little more elegant. I would prefer Linux tools, but Windows (or other) would be fine. This question is motivated by the security testing I do for PCI and general penetration testing. Update: GregS points out below that the SSL server picks from the cipher suites of the client. So it seems I would need to test all cipher suites one at a time. I think I can hack something together, but is there a tool that does particularly this?

  Read the article

• How can I install Satchmo?

  - by Jonathan Hayward

  I am trying to install Satchmo 0.9 on an Ubuntu 9.10 32-bit guest off of the instructions at http://bitbucket.org/chris1610/satchmo/downloads/Satchmo.pdf. I run into difficulties at 2.1.2: pip install -r http://bitbucket.org/chris1610/satchmo/raw/tip/scripts/requirements.txt pip install -e hg+http://bitbucket.org/chris1610/satchmo/@v0.9#egg=satchmo The first command fails because a compile error for how it's trying to build PIL. So I ran an "aptitude install python-imaging", locally copy the first line's requirements.text, and remove the line that's unsuccessfully trying to build PIL. The first line completes without reported error, as does the second. The next step tells me to change directory to the /path/to/new/store, and run: python clonesatchmo.py A little bit of trouble here; I am told that clonesatchmo.py will be in /bin by now, and it isn't there, but I put some Satchmo stuff under /usr/local, create a symlink in /bin, and run: python /bin/clonesatchmo.py This gives: jonathan@ubuntu:~/store$ python /bin/clonesatchmo.py Creating the Satchmo Application Traceback (most recent call last): File "/bin/clonesatchmo.py", line 108, in <module> create_satchmo_site(opts.site_name) File "/bin/clonesatchmo.py", line 47, in create_satchmo_site import satchmo_skeleton ImportError: No module named satchmo_skeleton A find after apparently checking out the repository reveals that there is no file with a name like satchmo*skeleton* on my system. I thought that bash might be prone to take part of the second pip invocation's URL as the beginning of a comment; I tried both: pip install -e hg+http://bitbucket.org/chris1610/satchmo/@v0.9\#egg=satchmo pip install -e hg+http://bitbucket.org/chris1610/satchmo/@v0.9#egg=satchmo Neither way of doing it seems to take care of the import error mentioned above. How can I get a Satchmo installation under Ubuntu, or at least enough of a Satchmo installation that I am able to start with a skeleton of a store and then flesh it out the way I want? Thanks, Jonathan

  Read the article

• DIY NAS - links for Instructions

  - by Kaushik Gopal

  Good folk of SU, I'm planning to build a NAS (Network Access Storage). I'm planning to do it cheap (:read Old PC Config + Open source software). I was looking for good DIY links . Before you shoot this down as a Repost, I'm only looking for good links containing detailed instructions for setting up a NAS. I did a fair bit of searching and found these links (so please suggest others. While these links are great they delve more on the hardware side, i'm looking for more instructions in the software side). For the sake of the interwebs: Ubuntu: http://snarfquest.com/wiki/index.php/Setting_up_a_Home_NAS http://www.smallnetbuilder.com/content/view/27962/77/ http://jonpeck.blogspot.com/2006/11/how-to-configure-80-fileserver-in-45.html FreeNAS http://www.smallbusinesscomputing.com/webmaster/article.php/3719706 http://www.codeproject.com/KB/system/homemade_nas.aspxhttp://www.codeproject.com/KB/system/homemade_nas.aspx There was one at rubbervir.us that everyone points to, but apparently the site has gone down. A couple of other queries: Is Printer/Scanner sharing a possibility with NAS devices? Many talk of torrent support with NAS Devices, a little more light on this? Does this mean, an auto download of torrent through a feed into NAS, or just support for storing Torrent download files onto the NAS(don't see the difference between the latter and a normal file tranfer)

  Read the article

• How to tell if Microsoft Works is 32 or 64 bit? Please Help!

  - by Bill Campbell

  Hi, I am trying to convert one of our apps to run on Win7 64 bit from XP 32 bit. One of the things that it uses is Excel to import files. It's a little complicated since it was using Microsoft.Jet.OLEDB.4.0 (Excel). I found Office 14 (2010) has a 64bit version I can download. I downloaded Office 2010 Beta but it didn't seem to install Microsoft.ACE.OLEDB.14.0. I found that I could download 2010 Office System Driver Beta: Data Connectivity Components which has the ACE.OLEDB.14 in it but when I try to install it, the installed tells me "You cannot install the 64-bit version of Access Database engine for Microsoft Office 2010 because you currently have 32-bit Office products installed". How do I determine what 32bit office products this is reffering to? My Dell came with Microsoft Works installed. I don't know if this is 32 or 64 bit. Is there anyway to tell? I don't want to uninstall this if it's not the problem and I'm not sure what else might be the problem. Any help would be appreciated! thanks, Bill

  Read the article

• Apache2 will not start on OpenSUSE after enabling mod_pagespeed

  - by alpha1

  I have a linode VPS, running openSUSE 12.1 (A little outdated, but stable). I have installed the RPMS for mod_pagespeed. mod_pagespeed.conf has "ModPagespeed on". Restarting apache fails after enabling pagespeed. the errors are not very helpful. li361-39:/usr/lib64/apache2 # a2enmod pagespeed li361-39:/usr/lib64/apache2 # service apache2 restart redirecting to systemctl Job failed. See system logs and 'systemctl status' for details. li361-39:/usr/lib64/apache2 # systemctl status apache2.service apache2.service - apache Loaded: loaded (/lib/systemd/system/apache2.service; enabled) Active: failed since Thu, 06 Jun 2013 20:49:00 +0000; 1s ago Process: 6701 ExecStop=/usr/sbin/httpd2 -D SYSTEMD -k stop (code=exited, status=0/SUCCESS) Process: 6704 ExecStart=/usr/sbin/start_apache2 -D SYSTEMD -k start (code=exited, status=1/FAILURE) Main PID: 6637 (code=exited, status=0/SUCCESS) CGroup: name=systemd:/system/apache2.service li361-39:/usr/lib64/apache2 # a2dismod pagespeed li361-39:/usr/lib64/apache2 # service apache2 restart redirecting to systemctl li361-39:/usr/lib64/apache2 # And the error log (/var/log/apache2/error_log) is useless as well. [Thu Jun 06 20:48:59 2013] [notice] caught SIGTERM, shutting down [Thu Jun 06 20:49:12 2013] [warn] Init: Session Cache is not configured [hint: SSLSessionCache] [Thu Jun 06 20:49:13 2013] [notice] Apache/2.2.21 (Linux/SUSE) mod_ssl/2.2.21 OpenSSL/1.0.0k PHP/5.4.15 configured -- resuming normal operations EDIT This is from /var/log/messages Jun 12 14:24:14 li361-39 start_apache2[27951]: httpd2-prefork: Syntax error on line 116 of /etc/apache2/httpd.conf: Syntax error on line 34 of /etc/apache2/sysconfig.d/loadmodule.conf: Cannot load /usr/lib64/apache2/mod_pagespeed.so into server: /usr/lib64/apache2/mod_pagespeed.so: undefined symbol: ap_unixd_config Full Log is here: http://pastebin.com/hjnbZZTr I've tried looking for other logs and checking the mod_pagespeed.conf against posts claiming it works and nothing is striking as wrong. Any Ideas?

  Read the article

• Mounting 2.5" SSD in Antec Atlas 550's 3.5" bay

  - by cecilkorik

  Just got some new SSDs to add to my servers, unfortunately there doesn't appear to be anywhere to actually mount them. The cases are Antec Atlas 550 mid-tower server cases. The problem is that the 3.5" bays are intended for 3.5" hard drives (obviously) not SSDs, so they are mounted from the bottom with rubber grommets to reduce vibration. There are NO side-holes in any of the 3.5" bays, all mounting has to be done from the bottom of the drive, through the thick rubber grommets, which requires special extra-long screws with large heads. Those screws will not work with the SSD, the thread is too coarse, 2.5" drives apparently use M3 screws with a finer pitch. The case's 3.5" bays have holes aligned for 2.5" drives and by moving the grommets into the appropriate holes they line up with the SSD. But that's as far as I can get. I don't have and cannot find any screws that use the finer M3 pitch that are long enough and have the wide head. I can't remove the grommets because the screw holes are much too wide without them, the entire head of the screw fits through. And again, there are no side-holes, so I can't use the mounting bracket that came with the drive nor any other 2.5"-3.5" bracket I've found. Here is a pic of what I am dealing with (note that the SSD is just resting on the case, it's not currently screwed in if that's not clear) Any ideas for safely mounting these little guys without resorting to duct tape or superglue would be very appreciated. If anyone knows where I could buy the appropriate type of M3 threaded screw or has any other ideas please help me out here.

  Read the article

• Replace text with spaces in MySQL

  - by javipas

  I'm trying to do a global replace of search in my database, which has a lot of articles with a double carriage return because of this code: <p> </p> I'd like to replace this in my WordPress blog so instead of that appears... nothing, and so I can delete the CR. I've tried this on my database UPDATE wp_posts set post_content = replace (post_content,'<p> </p>',''); but didn't work. Why? Do I have to add special thinks to consider the space between the <p>and the</p>? Mmm. Good points, both Jon Angliss and Wim. Jon, as you could have guessed, the database shows no entries with that text string. So there's something going on inside the post_content field. Wim, the famous   was replaced previously, but there are still hundreds of posts that for some reason have something different between the p and the /p tags. I've done a search of one of the posts with this error: mysql> select * from wp_posts where post_title like '%3DVisionLive%'; And looking in the wp_content field, this is a little piece of the post: Phil Eisler, responsable de la divisi?n 3D Vision.?</p> <p>?</p> <p>Este portal ser? por tanto No spanish tilde (accent) shown on the terminal, and instead of an space there's a quotation mark between the p and the /p tags. I've tried to replace <p>?</p>, but again, no results. There's some character (or several) there, but I don't know how to discover that. Maybe it's the character set of my terminal, but I've accessed the database from phpmyadmin and in that case there's a space character between the p and the /p. Weird.

  Read the article

• Running mod_php and suPHP same time

  - by BHare

  I recently went from Debian Lenny with 5.2.x and was able to use mod_php for any php files that were not located in /home/ and suPHP for all the php files that were located in /home/. I did this because I needed a default php.ini (given me all features of php) for my websites in /var/www/ and I didn't want to have to change the owner of all the .php files from root. I also had a default php.ini for all the /home/ php files without dangerous features. This was I had setup: <IfModule mod_suphp.c> <Directory /home/> AddType application/x-httpd-php .php .php3 .php4 .php5 suPHP_AddHandler application/x-httpd-php suPHP_Engine on suPHP_ConfigPath /home/shared/ </Directory> </IfModule> This was working perfect, but recently I upgraded to PHP to 5.3.5 from dotdeb (Lenny has no official php 5.3) . This had weird issues on lenny such as not display errors correctly and little tid bits. So I decided to upgrade from lenny to squeeze. Uninstalled php (along with it came suphp) and reinstalled with the new source. I now have 5.3.3-7 with Debian Squeeze but I cannot get mod_php and suPHP to run at the same time anymore. mod_php will always work and there are no errors in apache2 or suphp logs. If I disabled mod_php then suPHP will work. Is there thing I am doing wrong?

  Read the article

• Pure-FTPD accounts and permissions for websites

  - by EddyR

  I'm having trouble setting up the appropriate Pure-FTPD accounts and permissions - I have the following sites setup up on my Debian server. /var/www/site1 /var/www/site2 /var/www/wordpress The permissions are 775 for folders and 664 for files. The owner is currently admin:ftpgroup Wordpress also requires special permissions for file uploads in /var/www/wordpress/wp-content/uploads What I need is: a general admin group with access to /var/www a group for each site (site1, site2, wordpress) and a group or user, not www-data (?), with permissions to write files to the wordpress upload folder I ask because restrictions on linux groups (can't have groups in groups) makes it a little bit confusing and also because many of the tutorial sites have conflicting information like, some recommend the use of www-data and some don't. Also, I'm not sure if I understand how Pure-FTP is supposed to work exactly. I create a Pure-FTPD account and assign it a directory (/var/www) and a system user (ftpuser) and group (ftpgroup): Can I assign more than 1 path? For example, if a user requires access to 2 sites. Is it better to assign ftpgroup to all ftp locations and let Pure-FTPD manage account access? Why would anyone have more than 1 ftpuser or ftpgroup? (Doesn't it mean users have access to everyone else's files if they could get there?) Sorry for so many questions at once. I've been reading lots of tutorials but I think they've ended up making me more confused!

  Read the article

• ASUS P8B WS - Endless Reboots

  - by tuxGurl

  I am running a Intel XEON 1245 with 4GBx2 Kingston Memory ECC Unbuffered DDR3 on an ASUS P8B WS motherboard. BIOS Version 0904 x64. This system is a little over a month old. It is running Ubuntu 11.10. This evening I found the machine turned off. When I tried to restart it, it would POST and stop at the GRUB screen. When I selected Ubuntu and hit enter within 2-3 seconds the would shutdown and restart. If I stayed at the GRUB screen and did nothing the system would not cut out. I tried booting off a USB stick and again 2-3 seconds after selecting 'Try Ubuntu without Installing' the machine will cut power and reboot. Things I have tried so far: Resetting the BIOS using the on board jumper Resetting the BIOS settings to default Disconnecting all external hardware - except keyboard & monitor Booting with 1 stick of RAM - I tried different single sticks Ensured that onboard EPU and GPU boost switches are in the off position. I am running a Memtest86 right now and it has been running for 38+ minutes. This is not an OS problem or an overheating issue (I have a CoolerMaster HAF Case with 3 fans besides the CPU fan) I am at a loss as to what to try next. I think the BIOS is mis-configured somehow but I don't know what to look for.

  Read the article

• Public DNS redirect subdomain to Windows Server 2003 DNS

  - by user125248

  I'm a programmer by trade but often dabble in sysadmin tasks and responsibilities. I have recently been tasked with setting up a Windows Server 2003 networking environment for a small business with multiple branches. The business already has a domain name they use to host a website at www.example.com. Currently the DNS nameservers are at Zerigo and I would very much like it to remain that way (as they specialize in just providing DNS services and they do this very well). We also have a bunch of other subdomains we use to conviniently connect to the various branches that have static IPs assigned from ISPs, so we're able to connect easily to branch1.example.com. Is it possible to 'redirect' all intranet.example.com DNS requests to a Windows box? I've been doing a little reading and I see there are NS records that might be able to do this, and the Windows DNS server could then perform all of the lookups for that subdomain, say, server1.intranet.example.com or client5.intranet.example.com. This would seem better to me, than registering a new domain name for the organisation, as keeping a single domain name makes more organizational sense.

  Read the article

• Setup of HP ProCurve 2810-24G for iSCSI?

  - by 3molo

  Hi, I have a pair of ProCurve 2810-24G that I will use with a Dell Equallogic SAN and Vmware ESXi. Since ESXi does MPIO, I am a little uncertain on the configuration for links between the switches. Is a trunk the right way to go between the switches? I know that the ports for the SAN and the ESXi hosts should be untagged, so does that mean that I want tagged VLAN on the trunk ports? This is more or less the configuration: trunk 1-4 Trk1 Trunk snmp-server community "public" Unrestricted vlan 1 name "DEFAULT_VLAN" untagged 24,Trk1 ip address 10.180.3.1 255.255.255.0 no untagged 5-23 exit vlan 801 name "Storage" untagged 5-23 tagged Trk1 jumbo exit no fault-finder broadcast-storm stack commander "sanstack" spanning-tree spanning-tree Trk1 priority 4 spanning-tree force-version RSTP-operation The Equallogic PS4000 SAN has two controllers, with two network interfaces each. Dell recommends each controller to be connected to each of the switches. From vmware documentation, it seems creating one vmkernel per pNIC is recommended. With MPIO, this could allow for more than 1 Gbps throughput.

  Read the article

• E-mail hosting provider that can set up aliases with wildcards

  - by Richard Downer

  I am looking for an e-mail hosting provider that allow e-mail aliases containing wildcards. In more detail: I own my own domain. I want an e-mail hosting provider to manager e-mail for my domain. Now, to help deal with spam, I often give different e-mail addresses to different organisations. These e-mail addresses always start with the same prefix, but then differ. So, for example, I might give out these e-mail addresses: [email protected] [email protected] [email protected] I want to be able to go to the e-mail provider's control panel and set up an e-mail alias like this: [email protected] -- bounce/discard (because this address has been sold to spammers) joe-*@sample.com -- redirect to [email protected] What's I don't want to do is either have to set up every single e-mail address individually (because I make them up whenever I need them), nor do I want to have a general catch-all for any unrecognised address in my domain (because I don't want to be carpet-bombed with spam when a spammer runs a dictionary attack against my domain name.) Although this seems like a useful feature to have, it seems to be a little-known feature and I've not seen anybody advertise this feature. My current hosting provider offer this but I want to move away from them, so I need another provider that will continue to work with all the e-mail addresses I've been using for years. Alternatively, I could use mail server software that runs on Windows - I have seen some commercial packages offering this feature but they cost more than I can afford - are there any suggestions for low-cost software packages?

  Read the article

• How to use a local Leopard Server Mail server acting "like" an Exchange mail server

  - by Richard Chevre

  We have a local Exchange 2003 server (company .local) who is collecting POP3 mail accounts on a distant (company .com) mailserver. The mails are collected by the Exchange server every 5-10 minutes and stored locally (on company .local), so the users can read them without going on the "real" mail server (company.com) What was explaned to me is that the mail collection is made with POP Now we are migrating on Snow Leopard Server. We have chosen to use a new extension for our local domain: .leo So our mailserver's FQDN is mail.company.leo, and the users have a user [email protected] formated mail address. A) All works fine except that I can't find how to tell the mail.company.leo that he must retreive the mails from the "real" public server (mail.company.com) I'm hoping to use IMAP and not POP. I can send mail using SMTP relay from mail.company.leo but (I know it's trivial) answering is not possible, even if I specify the reply-to as [email protected] (this seems to be related to A) ) I don't know if it's very complicated (I suspect not, but...) to achieve what I want to do, and I'm not a genius. But as I'm a little bit lost, I hopesomebody can or will help me. Solving this will allow us to use iCal invitations too, so a lot of services depends of these mailserver settings Some of you discuss the fact thta we choose to use a "new" tld with the .leo extension. We have no problem for that, we could use .local. no problem ;) We used .leo instead of .local just to differentiate the two systems (Exchange and SnowLeopardServer). The question was not about that, it was just to know if we can set a SnowLeopard mail server to act like an Exchange Server. Again thank you for your advice and help Richard Thanks in advance Richard

  Read the article

• Create new folder for new sender name and move message into new folder

  - by Dave Jarvis

  Background I'd like to have Outlook 2010 automatically move e-mails into folders designated by the person's name. For example: Click Rules Click Manage Rules & Alerts Click New Rule Select "Move messages from someone to a folder" Click Next The following dialog is shown: Problem The next part usually looks as follows: Click people or public group Select the desired person Click specified Select the desired folder Question How would you automate those problematic manual tasks? Here's the logic for the new rule I'd like to create: Receive a new message. Extract the name of the sender. If it does not exist, create a new folder under Inbox Move the new message into the folder assigned to that person's name I think this will require a VBA macro. Related Links http://www.experts-exchange.com/Software/Office_Productivity/Groupware/Outlook/A_420-Extending-Outlook-Rules-via-Scripting.html http://msdn.microsoft.com/en-us/library/office/ee814735.aspx http://msdn.microsoft.com/en-us/library/office/ee814736.aspx http://stackoverflow.com/questions/11263483/how-do-i-trigger-a-macro-to-run-after-a-new-mail-is-received-in-outlook http://en.kioskea.net/faq/6174-outlook-a-macro-to-create-folders http://blogs.iis.net/robert_mcmurray/archive/2010/02/25/outlook-macros-part-1-moving-emails-into-personal-folders.aspx Update #1 The code might resemble something like: Public WithEvents myOlApp As Outlook.Application Sub Initialize_handler() Set myOlApp = CreateObject("Outlook.Application") End Sub Private Sub myOlApp_NewMail() Dim myInbox As Outlook.MAPIFolder Dim myItem As Outlook.MailItem Set myInbox = myOlApp.GetNamespace("MAPI").GetDefaultFolder(olFolderInbox) Set mySenderName = myItem.SenderName On Error GoTo ErrorHandler Set myDestinationFolder = myInbox.Folders.Add(mySenderName, olFolderInbox) Set myItems = myInbox.Items Set myItem = myItems.Find("[SenderName] = " & mySenderName) myItem.Move myDestinationFolder ErrorHandler: Resume Next End Sub Update #2 Split the code as follows: Sent a test message and nothing happened. The instructions for actually triggering a message when a new message arrives are a little light on details (for example, no mention is made regarding ThisOutlookSession and how to use it). Thank you.

  Read the article

• ZFS: Mirror vs. RAID-Z

  - by John Clayton

  I'm planning on building a file server using OpenSolaris and ZFS that will provide two primary services - be an iSCSI target for XenServer virtual machines & be a general home file server. The hardware I'm looking at includes 2x 4-port SATA controllers, 2x small boot drives (one on each controller), and 4x big drives for storage. This allows one free port per controller for upgrading the array down the road. Where I'm a little confused is how to setup the storage drives. For performance, mirroring appears to be king. I'm having a hard time seeing what the benefit would be of using RAIDZ over mirroring would be. With this setup I can see two options - two mirrored pools in one stripe, or RAIDZ2. Both should protect against 2 drive failures, and/or one controller failure...the only benefit of RAIDZ2 would be that any 2 drives could fail. The storage should be 50% of capacity in both cases, but the first should have much better performance, right? The other thing I'm trying to wrap my mind around is the benefit of mirrored arrays with more than two devices. For data integrity what, if any, would be the benefit of a RAIDZ over a three-way mirror? Since ZFS maintains file integrity what does RAIDZ bring to the table...doesn't ZFS's integrity checks negate the value of RAIDZ's parity?

  Read the article

• How can I view the binary contents of a file natively in Windows 7? (Is it possible.)

  - by Shannon Severance

  I have a file, a little bigger than 500MB, that is causing some problems. I believe the issue is in the end of line (EOL) convention used. I would like to look at the file in its uninterpreted raw form (1) to confirm the EOL convention of the file. How can I view the "binary" of a file using something built in to Windows 7? I would prefer to avoid having to download anything additional. (1) My coworker and I opened the file in text editors, and they show the lines as one would expect. But both text editors will open files with different EOL conventions and interpret them automagically. (TextEdit and Emacs 24.2. For Emacs I had created a second file with just the first 4K bytes using head -c4096 on a linux box and opened that from my windows box. I attempted to use hexl-mode in Emacs, but when I went to hexl-mode and back to text-mode, the contents of the buffer had changed, adding a visible ^M to the end of each line, so I'm not trusting that at the moment. I believe the issue may be in the end of line character(s) used. The editors my coworker and I tried (1) just automagically recognized the end of line convention and showed us lines. And based on other evidence I believe the EOL convention is carriage return only. (2) return only. are able to recognize and To know what is actually in the file, I would like to look at the binary contents of the file, or at least a couple thousand bytes of the file, preferablely in Hex, though I could work with decimal or octal. Just ones an zeros would be pretty rough to look at.

  Read the article

• external drive enclosure -> software RAID 5?

  - by memilanuk

  Hello all, I have two older PCs on my LAN posing as 'servers'... one running FreeNAS off a USB stick using three 500GB hdds in a ZFS RAID-Z pool serving as storage for the LAN and one running Debian Lenny with an 80GB drive used as a general purpose 'tinker' box that I can ssh into, etc. Problem is that the SMART report for one of those 500GB drives in the FreeNAS box is showing some pre-failure attributes, and the whole array is a little small anyways. Rather than simply replace one 500GB drive with another 500GB drive, and have no backup of the file server, I'd like to upgrade all the drives to 2TB ones - but I have no where to store that much data in the mean while. As such, I started looking at getting a 4-bay external drive enclosure with an eSATA card for the Debian box, with the hopes of creating a RAID5 + LVM setup using those drives and backing the data up to that external drive enclosure. After the backup is done, replace the drives in the FreeNAS box and rebuild the array there and mirror the data back. Then, I'd have both the primary storage (on the FreeNAS box) and a backup (which I don't have currently) using the external drive enclosure on the Debian box. My big question is... most of these external drive boxes seem to claim support for JBOD, RAID 0, 1, 10, 5, etc. - should I presume that is simply fake RAID like many commodity mobos have, and not really usable in Linux? In that case, with all the drives hanging off the one eSATA connection, will Linux (specifically Debian Squeeze, as I plan on upgrading that box here shortly) see all four drives, or just the first one? Will I be able to configure them in a RAID5 array as desired? Thanks, Monte

  Read the article

• mcelog doesn't fails to start PUIAS 6.4 amd hardware

  - by Predrag Punosevac

  Folks, I am a total Linux n00b. I am trying to deploy mcelog on one of my computing nodes running PUIAS 6.4 (i86_64) [root@lov3 edac]# uname -a Linux lov3.mylab.org 2.6.32-358.18.1.el6.x86_64 #1 SMP Tue Aug 27 22:40:32 EDT 2013 x86_64 x86_64 x86_64 GNU/Linux a free clone of Red Hat 6.4 on AMD hardware [root@lov3 mcelog]# lscpu Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 64 On-line CPU(s) list: 0-63 Thread(s) per core: 2 Core(s) per socket: 8 Socket(s): 4 NUMA node(s): 8 Vendor ID: AuthenticAMD CPU family: 21 Model: 2 Stepping: 0 CPU MHz: 1400.000 BogoMIPS: 4999.30 Virtualization: AMD-V L1d cache: 16K L1i cache: 64K L2 cache: 2048K L3 cache: 6144K NUMA node0 CPU(s): 0-7 NUMA node1 CPU(s): 8-15 NUMA node2 CPU(s): 16-23 NUMA node3 CPU(s): 24-31 NUMA node4 CPU(s): 32-39 NUMA node5 CPU(s): 40-47 NUMA node6 CPU(s): 48-55 NUMA node7 CPU(s): 56-63 My mcelog.conf file is more or less default apart of the fact that I would like to run mcelog as a daemon and to log errors. When I start mcelog [root@lov3 mcelog]# mcelog --config-file mcelog.conf AMD Processor family 21: Please load edac_mce_amd module. However the module is present [root@lov3 mcelog]# locate edac_mce_amd.ko /lib/modules/2.6.32-358.18.1.el6.x86_64/kernel/drivers/edac/edac_mce_amd.ko /lib/modules/2.6.32-358.el6.x86_64/kernel/drivers/edac/edac_mce_amd.ko and loaded [root@lov3 edac]# lsmod | grep mce edac_mce_amd 14705 1 amd64_edac_mod Is there anything that I can do to get mcelog working? The only reference I found is this thread http://lists.centos.org/pipermail/centos/2012-November/130226.html

  Read the article

• How to setup a virtual host in Ubuntu?

  - by Rade

  I have an app that's accessible via 1.2.3.4/myapp. The app is installed in /var/www/myapp. I've set up a subdomain(apps.mydomain.com) that points to 1.2.3.4. I want the server to point to var/www/myapp if I type apps.mydomain.com/myapp, how do I do that? I have experience creating virtual hosts(lots of them) locally but I'm lost because it's now in production and it's a little different. Here's my virtual host config: <VirtualHost *:80> ServerAdmin webmaster@localhost ServerName apps.mydomain.com/myapp DocumentRoot /var/www/myapp/public <Directory /> Options FollowSymLinks AllowOverride All </Directory> <Directory /var/www/> Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride All Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog ${APACHE_LOG_DIR}/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog ${APACHE_LOG_DIR}/access.log combined </VirtualHost> Any idea why I still see the files instead of pointing me to the document root? Just in case someone might ask, the app is based on Laravel 4 framework. It's really bad right now because anyone can access the files from the browser.

  Read the article

• Window Management for Mac OS X

  - by Paolo Maffei

  Ok, I feel dumb. I've put many hours into this and found nothing, yet. When I was using Windows I had this little tool called WinSplit Revolution. What it did was letting you divide your screen into how many and of how much size you choose "virtual monitors". You set one time of you want to divide your monitor, then everytime WinSplit is opened the monitor is automatically divided into Virtual Monitors. Screenshots: http://www.google.com/images?hl=en&q=winsplit%20revolution&um=1&ie=UTF-8&source=og&sa=N&tab=wi&biw=1045&bih=499 I'm now using a 30' which i want almost always divided into 4 equal size "virtual monitors" (plus my mbp 13' those will be 5 1280x800 virtual monitors) Now I've switched to Mac OS X and can't find anything that does just this efficiently. I tried Divvy but I found no way to divide my screen into arbitrary "virtual monitors", I need a couple of clicks to select a 3x3 space on a 9x9 grid. Before starting coding something like this can you tell me if you already know of some software that does window management like this?

  Read the article

• Keynote presentation in conjunction with other app?

  - by Sören Kuklau

  The short version: I'd like to tell Apple Keynote to switch to a specific app (never leaving full-screen mode) before a certain slide appears, then display that slide as soon as I switch back. Some more details: I'm going to show off five major improvements in an upcoming release of our app. I want one slide highlighting the feature, then one or two showing some details, perhaps with screenshots. After that, so people get a better impression of what I'm talking about, I'll show it off live — to do this, I have to switch to a VM or remote session (since this is a Windows app). Then, I'd like to switch back and go to the next feature. I.e., it would be similar to Apple's "Demo" slides in a cursive font, except not with a different screen, or different computer. It's this switching back and forth that I want to make smooth, just to wow the audience a little. Can I perhaps do a "special" slide in Keynote that tells it to run an AppleScript? Better yet, to switch to an app, and wait until I switch back, and then automatically advance to the next slide?

  Read the article

• Ripping CD Audio simultaneously from 2 drives on one PC via USB or PATA - rip accuracy preserved?

  - by Rob

  I'm considering ripping audio (reading audio) from CDs using 2 drives simultaneously to speed up the process of ripping the CDs - i.e. 2 at a time rather than 1. Are there any issues with achieving maximum rip accuracy? In general I wondered if people have tried this and if the simultaneous streams from both rip activities would overload the host machine and cause packet loss or read retries resulting in a sub-standard CD-DA Audio CD rip? If it just means the rip is slightly slower (but still faster than sequentially doing one rip followed by another) but still of maximum accuracy then that is OK for me. I will be using dbPowerAmp to rip the CDs and converting to FLAC lossless format. Specific examples: There are 2 machines I intend to do it on: A Toshiba NB100 1.6Ghz Atom netbook, 2Gb RAM, running Windows XP Home with 1 external LG DVD/CD burner and external 1 LG Blu-ray burner attached via USB 2.0, ripping to the machine's 5400rpm internal hard drive. This rips from one CD drive very well, more than adequate, it is a nippy, fast little machine for its specification. A Desktop PC running Windows 7 Home Premium with MSI P4M900M2-L/ MS-7255v2.0 motherboard and 1.86Ghz Intel Core 2 Duo E6320, 7200rpm hard drive and 2Gb RAM, with an internal LG PATA DVD/CD burner (master) and a Philips DVD/CD burner (slave) on the same PATA bus (perhaps separate buses would be another option to consider here). Thoughts?

  Read the article

• Why won't Google Chrome install on my Windows 7?

  - by quakkels

  I can tell something is wrong with my computer. A little history: Google Chrome was not running correctly. When i was using facebook, any link on face that ran an ajax javascript function would not work. No error was being thrown, it just wasn't working. I uninstalled Chrome and reinstalled it. On re-install, a toolbar automatically installed with Chrome. BitTorrentBar. I did not install BitTorrentBar, it installed on it's own. Bad. When BitTorrentBar was active, then ajax functions on facebook worked. When I deactivated or uninstalled BittorrentBar from Chrome extensions, then ajax stopped working. I ran scanned the computer with Avast (free version) and SpyBot Search and Destroy (also free). They found nothing wrong. I uninstalled Chrome using Control Panel and then I went through my file system deleting anything that had "google", "BitTorrent", "chrome", or "conduit". Conduit seems to distribute BitTorrentBar. After doing all that, I tried to reinstall Chrome. I got this error: System.ComponentModel.Win32Exception: The system cannot find the file specified at System.Diagnostics.Process.StartWithShellExecuteEx(ProcessStartInfo startInfo) at System.Diagnostics.Process.Start() at System.Diagnostics.Process.Start(ProcessStartInfo startInfo) at ClickOnceBootStrap.ClickOnceEntry.Main() This error interupts the Chrome install every time! computer scans don't show anything wrong. So then, I thought this might be a .net framework error. Perhaps I deleted something I wasn't supposed to. So I reinstalled .NET Framework 4 and checked the repair option. I also ran Windows Updates. When I tried to download Chrome, again I got the same error as listed above. What should I do?

  Read the article

< Previous Page | 332 333 334 335 336 337 338 339 340 341 342 343  | Next Page >