Search Results

Search found 1607 results on 65 pages for 'disks'.

Page 34/65 | < Previous Page | 30 31 32 33 34 35 36 37 38 39 40 41  | Next Page >

• Windows 7 won't load unless other harddrives "disconnect"ed in UEFI shell

  - by lmz

  I have three disks, one GPT partitioned containing Windows 7 and Debian, the other MBR partitioned containing CentOS, and the other one MBR partitioned, empty. It used to work (loading Windows boot manager using rEFIt) but now after installing CentOS and OpenIndiana on the second drive, Windows won't boot. The logo is displayed briefly and then a text mode scrollbar "Loading files", then back to the rEFIt menu. The only thing that makes it work is if I drop into the UEFI shell and run disconnect XX where XX is the device handle of the other hard drives (obtained from running devices). This makes me think that the bootloader is getting confused about where the Windows partition is. Is there any information on how the Windows UEFI boot loader finds the Windows partition, or is there any logging I can turn on to help troubleshoot this issue?

  Read the article

• Path of md device wrong after reboot

  - by flammi88

  I have to set up a software raid (level1) on a Ubuntu server 12.04. It should serve files in the network via Samba. The server has the following disks: 250gb Sata hdd (Ubuntu is installed on that drive) 2 TB Sata hdd (first disk in raid array, data disk) 2 TB Sata hdd (second data disk) I created one partition on every data disk with the type Linux raid autodetect. In the second step I created the raid1 with the following command: mdadm --create /dev/md0 --level=1 --raid-devices=2 /dev/sdb1 /dev/sdc1 After that, I added the array to the mdconf: mdadm --examine --scan >> /etc/mdadm/mdadm.conf The problem is: After a reboot the array is not available on the path /dev/md0. Instead of that it gets reassembled as /dev/md/0 but it is not very reliable. Has anybody a solution for this issue?

  Read the article

• AutoCAD 11 and network file shares

  - by gravyface

  Small network of perhaps half a dozen engineers, currently working on local copies of AutoCAD project files, which are then copied back up to file server (2008 Standard, 1-2 year old Dell server hardware, RAID 5 SAS disks (10k? not positive)) at end of day. To me, this sounds horribly inefficient and error-prone, however, I've been told that "AutoCAD and network files = bad idea" and this is gospel. The network is currently 10/100 (perhaps this is the reason for the "gospel") but all the workstations are within 2 years old and have GbE NICs so an upgrade of the core switch is long overdue. However, I know certain applications don't like network access, at all, and any sign of latency or disruption brings the whole thing crashing down. Anyone care to chime in?

  Read the article

• Linux halts every few seconds

  - by Zeppomedio

  We're having an issue where one our Linux boxes (Ubuntu 10.04 LTS, running on EC2 with a quadruple-large size, 68GB of RAM and 8 virtual cores with 3.25GHz each) freezes up every few seconds. Typing in an ssh session will freeze, and running strace on one of the Postgresql processes that's running usually shows: 02:37:41.567990 semop(7831581, {{3, -1, 0}}, 1 for a few seconds before it proceeds (it always gets stuck at that semop). OProfile shows that most of the time is spent in the kernel (60%) versus 37% in Postgresql. The result of these halts (which began suddenly a day ago) is that load on the box has gone from 0.7 to 10+, and causes our entire stack to slow done. Any ideas on how to track down what's going on? iostat doesn't show the disks being particularly slow or overloaded, and top shows user cpu % spike from 8% to about 40% whenever these back-ups happen.

  Read the article

• INtegral card readers have drivers installed but do not show on my computer

  - by Santiago Berniz

  I recenlty fixed a computer powerbutton and accidentally unplugged a sd card reader and did not know where was at (didnt knw if it was usb or firewire/ after i found out, i guess i installed it on a different usb so reinstalled the drivers..Drivers show installed successfully, ready to use. but THey do not show up on my computer as removable disks (E:) etc.a s they should I have windows 7 home premium 64 bits. the computer is a Acer Aspire M1201-be50001a. I tried following the installation and they show up while installing and then hide again. Any help is appreciated Thanks in advance.

  Read the article

• ZFS SAS/SATA controller recommendations

  - by ewwhite

  I've been working with OpenSolaris and ZFS for 6 months, primarily on a Sun Fire x4540 and standard Dell and HP hardware. One downside to standard Perc and HP Smart Array controllers is that they do not have a true "passthrough" JBOD mode to present individual disks to ZFS. One can configure multiple RAID 0 arrays and get them working in ZFS, but it impacts hotswap capabilities (thus requiring a reboot upon disk failure/replacement). I'm curious as to what SAS/SATA controllers are recommended for home-brewed ZFS storage solutions. In addition, what effect does battery-backed write cache (BBWC) have in ZFS storage?

  Read the article

• What kind of storage do people actually use for VMware ESX servers?

  - by Dirk Paessler

  VMware and many network evangelists try to tell you that sophisticated (=expensive) fiber SANs are the "only" storage option for VMware ESX and ESXi servers. Well, yes, of course. Using a SAN is fast, reliable and makes vMotion possible. Great. But: Can all ESX/ESXi users really afford SANs? My theory is that less than 20% of all VMware ESX installations on this planet actually use fiber or iSCS SANs. Most of these installation will be in larger companies who can afford this. I would predict that most VMware installations use "attached storage" (vmdks are stored on disks inside the server). Most of them run in SMEs and there are so many of them! We run two ESX 3.5 servers with attached storage and two ESX 4 servers with an iSCS san. And the "real live difference" between both is barely notable :-) Do you know of any official statistics for this question? What do you use as your storage medium?

  Read the article

• How to increase hard drive transfer speed

  - by atif089

  This is my motherboard GA-M61PME-S2 (SATA upto 3.0 Gbps) and This is my Hard Disk Samsung hd502hi Capacity 500 GB Cache 16MB Disks / Heads 1 / 2 Interface SATA 3Gb/s Spindle Speed 5400 RPM Sustained Data Rate OD 100 MB/s Average Seek 8.9 ms Average Latency 5.56 ms Data Transfer Rate 300 MB/sec Weight 470 grams Power: Idle / Seek / R-W / Spin-up 3.9W / 4.8W / 5.1W / ~24W Acoustics (sound power) 2.2 / 2.7 Bel (idle / quiet seek / performance seek) When I copy things from one partition to another they transfer at a maximum of 30 MBps. However the drive supports upto 300 MBps right ? How do I increase the transfer speeds? P.S - Using Windows XP, All partitions are NTFS.

  Read the article

• Switching BIOS SATA RAID/AHCI setting causes BSOD at Windows Start - Why?

  - by thephatp

  I just changed my disk setup from: 1 SATA HDD Primary OS Disk 2x SATA HDD Backup Disks in RAID 1 TO: 1 SATA SSD Primary OS Disk 1 SATA HDD Backup Disk [No RAID] Everything worked great, no problem. So, since I don't have a RAID array anymore, I decided that I could change my BIOS setting to AHCI instead of RAID. I have a Gigabyte GA-P35-DS3R v1.0 mobo. These are my steps: Settings Integrated Peripherals "SATA RAID/AHCI Mode" = RAID -- Changed this setting to AHCI Reboot Windows Start screen shows up, but as the color orbs are spinning into focus, BSOD and immediate restart Repeated reboot several times, same outcome Next Step: Launch BIOS settings Integrated Peripherals "Onboard SATA/IDE Ctrl Mode" = RAID -- Changed this setting to AHCI Reboot Windows Start screen shows up, but as the color orbs are spinning into focus, BSOD and immediate restart Repeated reboot several times, same outcome Switch both settings back to RAID, reboot, and Windows starts up just fine, no issues. What am I missing? Why can't I set it to AHCI mode without BSODs?

  Read the article

• Linux software to maintain old/backup versions of directory tree

  - by Bittrance

  I am replacing an old Linux file server serving NFS and CIFS. For the new server (still serving CIFS and NFS), I would like to have software that automatically and efficiently maintains old revisions of files in parallel trees, so that they can be accessed by users without special tools. I am looking for software that is akin to Time Machine or Flyback, but works well on a server. The dataset is some 10000 files weighing maybe 60 GB. Changes are relatively few, usually less than 100 files changes daily. Using LVM snapshots will not cut it, as the old revisions must reside on a separate set of disks from the live data. Edit: To clarify: keeping old revisions is non-vital addition to the solution, so any suggestion will have to stay in the range of some hundred euros.

  Read the article

• Is a "failed" RAID 5 disk really no good?

  - by GregH

  This is my first venture in to setting up RAID on my home system. After installing 3 x 1TB drives in RAID 5, everything was running well for about 10 days. Then, the Intel Rapid Storage Technology software that monitors the disks and RAID on my system, told me that I had a failed drive. I marked the drive as good, and the array rebuilt. Then a day or so later I got a notification again, that the drive failed. I'm just wondering if this drive really is no good or if there is something I can do to get it working again? Or, do I just need to return it to the store where I bought it and get a replacement?

  Read the article

• How can I capture a one-time full backup of a server using AMANDA?

  - by Daemon

  Suppose I have a preconfigured AMANDA server running automated network backups of directories specified in my disklists file. Normally, AMANDA will backup targets disks to /dumps/amanda. Is there any single command or method to perform a manual, one-time, full backup dump to another destination drive? I ask since I'm investigating the possibility of introducing rotating external hard-drive backups for offsite storage and I want to leverage our existing backup strategies wherever possible. Ideally, a full backup restore should be achievable from only any one of these offsite backup discs.

  Read the article

• Repair GRUB bootloader for multiboot system

  - by user1715324

  I have two hard disks – one a 1TB and the other a 250 GB. I installed the OSes in the following order: Windows 7 on the first hard disk (1 TB) After that Kubuntu 12.04 on a partition (/dev/sdb7) on the second hard disk (250 GB) The second drive also contains an NTFS partition. Now, kubuntu's bootloader was installed on the second hard drive's MBR (and successfully detected Windows 7). So, whenever I wanted to load Windows I used to select the first hard disk from the BIOS boot menu and the second hard disk whenever I wanted to load kubuntu. I know I could have set the second hard disk as the default drive, still I prefered this method. The problem started when I installed Linux Mint 13 on the second hard disk (/dev/sdb3) and overwrote kubuntu's original MBR. Now, the GRUB just detects Mint and Windows. The MBR on the 1 TB hard disk is untouched. Is there a way I can modify the MBR on the second hard disk now so that it will show kubuntu and Mint both?

  Read the article

• partition alignment on fresh windows 2003 ent server

  - by Datapimp23

  Hi, I have this server which has it's physical disks in RAID 5 controlled by a 3com raid controller. size of the stripe unit is unknown for the moment (Can check tomorrow in the office). I need to install windows server 2003 ENT and create 2 partitions (OS, Data). I'd like to create the partitions before the installation on windows server. They have to be aligned properly. I have the newest version of gparted on a disc but I have no clue if this is the right tool. Can someone point me in the right direction? Thanks

  Read the article

• Configuring Backup Exec 2012 using USB hard drives as media

  - by SydxPages

  I have found some information on this but have not found the exact answers to these questions. Background I have installed backup exec 2012 (with agents for databases) I have configured a storage pool, with 2 USB drives (1TB) The backups are configured to backup to one of the 2 drives (depending on which one is connected) I have 2 questions: How do I get Backup Exec to tell me which disk to insert? I have used tapes before and it told me then which tape to use? I was hoping this was available for disks too. (Whilst there are only 2 at the moment, there will be more). And then how do I get Backup Exec to delete old backups when the disk if full.

  Read the article

• Dual boot Windows XP 32 bit and Windows 7 64-bit

  - by Santanu Roy

  My system config is AMD phenom-II x2 550 processor, 2x2gb(800fsb)ddr2 zion ram, gigabyte ga-m61pme-s2 motherboard, 160gb sata hdd. Now I am planning to install Windows XP sp3 (32-bit) and Windows 7 (64bit). My first questions are: Is my system enough for the above mentioned two OSes? Which OS one should be installed first on local disk c: drive? I have both XP and vista drivers on separate disks as provided with my motherboard but don't have drivers for win-7, so can I use my vista driver for win-7?

  Read the article

• Possible to restore Windows Partition disk image?

  - by kd7iwp

  I have a machine that was dual-booting Windows 7 and Ubuntu 12.04. I used the Disks program in Ubuntu to make a disk image of my windows partition which I saved on an external disk. I then reformatted the main drive and installed Ubuntu 12.10. I created a spare partition and restored that Windows disk image to that partition. Is it possible to boot Windows? I have run boot-repair and Grub now gives me both Ubuntu and Windows options but when I select Windows I get only a black screen with blinking cursor. I ran a Windows recovery disk and ran startup repair but still no luck. I also tried running lilo inside Ubuntu but still can't boot Windows. Any other ideas? PS, I'm on a Netbook with no DVD drive so I can't just reinstall Windows though if that is my only option I can borrow a DVD eventually.

  Read the article

• DFSR - What happens when one server gets maxed out?

  - by Jared

  What happens when one server in a DFSR pool maxes out its disk space? I am at the very beginning of my research in DFS/R and this struck me. I plan on implementing this on one server with RAID1 (160GB) and on another server with a RAID5 (500GB). What happens when my 1st server with 160GB disks, run out of space? Will it spill over to the 500GB server? Is it advisable at all to even have the RAID1 server in the DFSR pool? Because the RAID1 server is also my Domain Controller. Hope you guys can help me out here (OS are Win2k3R2)

  Read the article

• DBan not working because disk has bad sectors? [migrated]

  - by canadiancreed

  Attempting to wipe the drive of a laptop that I have before it's sold, and normally use DBAN to do so. However this time it starts and then finishes instantly with the following message. "DBAN finished with non-fatal errors This is usually cause by disks with bad sectors" Have tried multiple flags such as noverify to force it to skip this check (it doesn't show bad sectors in the OS scan in windows). but the error always comes back. This is the only time that I've seen this message, as every other of the few drives I've used this software on usually take 3-5 hours to do their job.

  Read the article

• 1Tb disk formatted on Linux won't mount on windows nor mac

  - by Pedro MC

  I have an external HD (western digital) with 1Tb. I use Linux but I wanted to reserve a cross platform partition on the disk. I decided to create two partitions and used the "disks" application to do it. I created one partition with the LUKS (version 1) encryption and the other one, cross platform, in NTFS filesystem. Things work fine on my OS but when I try to use the disk (the cross platform partition) on both windows and mac the device is not recognized. What could it be? Next, output of "sfdisk -l /dev/sdb": Disk /dev/sdb: 121600 cylinders, 255 heads, 63 sectors/track Units = cylinders of 8225280 bytes, blocks of 1024 bytes, counting from 0 Device Boot Start End #cyls #blocks Id System /dev/sdb1 0+ 36473- 36473- 292968750 83 Linux /dev/sdb2 36473+ 121600- 85128- 683789062+ 83 Linux /dev/sdb3 0 - 0 0 0 Empty /dev/sdb4 0 - 0 0 0 Empty

  Read the article

• Hide non VHD partitions

  - by James

  Hey! I have two partition on my HDD: C and D. On D: I have a vhd image (with windows 7 ultimate) that I use to boot from. When I'm running the OS from VHD I can still access my physical parititons. Is it possible to dismount them, in order to see just the virtual disks in the VHD OS? I tried with the physical C and it says that I cannot dismount a boot paritition and I think D cannot be dismounted because the VHD is on it.

  Read the article

• Can't Install Windows 2008 R2 on Lenovo Laptop With SSD

  - by Ben

  I am trying to install Windows Server 2008 R2 on a new Lenovo X201 or T410 laptop. Setup halts with the following pop-up: A required CD/DVD device driver is missing. If you have a driver floppy disk, CD, DVD, or USB flash drive, please insert it now. Note: If the windows installation media is in the CD/DVD drive you can safely remove it for this step. The CD drive is obviously working, as it's booting from CD to get to this point. The only thing I can think is that it is to do with the fact they have SSD disks in - but that's just a guess.

  Read the article

• Disabling the Driver Region on a Mac

  - by Cawas

  So, this is the first time I try to watch a DVD disc on my (new) Mac and I wonder if I can keep it as fresh-new by not choosing any region and just play discs from anywhere. I understand the media industry made that lock for copyright and whatever, but do I absolutely have to choose a region to be able to play disks, even if I got original ones from different places? Why can I "change region" just 5 times, why even allowing changing? Also, on a side-note, I wonder how to disable the regular DVD Player.

  Read the article

• Restoring factory image of HP Laptop

  - by Ahmed

  I use a HP G62. I am unable to use my recovery disk to restore to factory settings. I had no problems earlier until I created an additional partition which I hear might have changed my hard disk to dynamic. How do I get back to 'normal'? I don't mind formatting the disk. I just want my factory OS back. .............. i get an error message at about 69 percent telling me that the restoration process failed. I'm using the factory image disks i created using the hp recovery manager. I have tried formating the hard drive clean and then restoring woth the cd, it didn't work. I was always able to restore before i created that partition.

  Read the article

• Are SANs unreliable?

  - by chaos

  So at the place where I wear one of my various hats, this one representing a development rather than admin role, there's been an initiative to move to SANs. So far, I have been spectacularly unimpressed. First it was this behavior where, when MySQL databases are on the SAN, the first few tables that anything tries to hit after the system boots come up as nonexistent and MySQL has to be restarted before it realizes they're actually there. Then today, on multiple systems (including the primary SVN repository, ever-so-wonderfully) we get SAN mounts spewing IO errors and the filesystems going into read-only, which is the kind of behavior I expect from directly mounted naked disks, not fault-tolerant managed storage. Right now, I'm at the point where if I were putting together a project and somebody said "hey we should use SANs", my response would be "GTFO". So basically I want to know whether my experience is typical or even common, or whether I'm having some kind of freakishly bad luck with SANs. The systems these SANs are attached to are all CentOS machines, if that's relevant.

  Read the article

< Previous Page | 30 31 32 33 34 35 36 37 38 39 40 41  | Next Page >