Search Results

Search found 1607 results on 65 pages for 'disks'.

Page 33/65 | < Previous Page | 29 30 31 32 33 34 35 36 37 38 39 40  | Next Page >

• low-cost RAID NAS for home use?

  - by gravyface

  Have a noisy, power-hungry Pentium 4 based Ubuntu server that I want to replace with a nice, low-power mini-ITX/Intel Atom-based machine to do my network services (DHCP, DNS, IPSec, Web/mail, FTP, etc.) and am thinking of a (hopefully) equally-low powered NAS using NFS over GbE with at least 1 TB space and a RAID 5 (preferred) or RAID 0 (likely) configuration for redundancy with a couple of spare disks I can swap in as needed down the road. Would I be better off getting a full sized ATX mobo/case and configuring the RAID internally? I really want to keep power consumption down as much as possible as I leave my home server up 24/7.

  Read the article

• low-cost RAID NAS for home use?

  - by gravyface

  Have a noisy, power-hungry Pentium 4 based Ubuntu server that I want to replace with a nice, low-power mini-ITX/Intel Atom-based machine to do my network services (DHCP, DNS, IPSec, Web/mail, FTP, etc.) and am thinking of a (hopefully) equally-low powered NAS using NFS over GbE with at least 1 TB space and a RAID 5 (preferred) or RAID 0 (likely) configuration for redundancy with a couple of spare disks I can swap in as needed down the road. Would I be better off getting a full sized ATX mobo/case and configuring the RAID internally? I really want to keep power consumption down as much as possible as I leave my home server up 24/7.

  Read the article

• NFS and KVM. Slow Speed

  - by Javier Martinez

  I have a KVM virtualization in Debian with 2 guests (Debian and Windows 2008). I want to have a 'mount point' shared that can be accessed by the 3 system (host and 2 guests) at the same time. So the only thing that I found was a NFS/SMB network storage. I picked NFS Due to my Ethernet network (10/100), the speed average that I get between accessing/transfering files between the 3 system is always 8~10MB/s. The point is if is there any chance of get a boost system for sharing files between 3 system (at the same time) without wasting the speed of my SATA disks. I mean, without the Ethernet limitation of 10 MB/s

  Read the article

• DBan not working because disk has bad sectors?

  - by canadiancreed

  Attempting to wipe the drive of a laptop that I have before it's sold, and normally use DBAN to do so. However this time it starts and then finishes instantly with the following message. "DBAN finished with non-fatal errors This is usually cause by disks with bad sectors" Have tried multiple flags such as noverify to force it to skip this check (it doesn't show bad sectors in the OS scan in windows). but the error always comes back. This is the only time that I've seen this message, as every other of the few drives I've used this software on usually take 3-5 hours to do their job.

  Read the article

• Single/Mulitple LUN for vmware vm hosting

  - by Yucong Sun

  I'm building a iscsi storage system for hosting about ~500 Vmware vm running concurrently. And I have a disk array with 15 disks, I only need moderate write performance but preferably not SPOFed. so, that leaves me with RAID1 / RAID10 , I have couple choices: 1) 3x LUN 4disk RAID10 + 3 hot-swap 2) 1x LUN 14disk RAID10 + 1 hot-swap 3) 7x LUN 2disk RAID1 + 1 host-swap Which way is better? Is there a real problem running 500 vms on single LUN? and would it be better to resort to 7 LUns so each VM is better isolated with each other?

  Read the article

• Linux software raid robustness

  - by Waxhead

  I have a 4 disk 5TB raid5 setup where a disk is showing signs of going down the drain. It is reporting media errors and from dmesg I can see that several read errors are corrected. smartctl does report "notifications" but no panic so far. Since new disks are rather expensive at the moment I am starting to pondering exactly how robust the linux md layer is. I would appreciate if someone could shed some light on how md actually deals with disk errors. For example how does md deal with write and read errors - what does it (really) take for disk to be rejected from an array. I also read that recently md got support for mapping out bad blocks. Does this mean that the read errors I've had would have been mapped out if I where running kernel 3.1 or would md still try to "work on them" to make them usable.

  Read the article

• Changing Windows Media Center StartRecording Task Scheduler options

  - by T Reddy

  Hi, I'm experiencing some occasional crashes waking from sleep and I believe it may be related to the Corsair SSD F40GB2 as my boot disk...or the new Ceton tuner I recently installed... I dunno what the real problem is as I can't reproduce the problem manually. I read somewhere that I should not allow the hard disks to sleep...so I'm trying that in the meantime... At any rate, I don't really care that the computer crashes so long as WMC will start recording the task as soon as possible...the task is scheduled to wake the computer 5 minutes before the recording starts. I noticed that there is a StartRecording param in the Media Center folder in Task Scheduler. There is an option (currently unchecked) that will retry a failed task. I would like to know if there is a way to enable that checkbox. My hope is that if my PC crashes when waking up for this task, that after it reboots the task will trigger again and start recording. Thanks!

  Read the article

• what is acceptable datastore latency on VMware ESXi host?

  - by BeowulfNode42

  Looking at our performance figures on our existing VMware ESXi 4.1 host at the Datastore/Real-time performance data Write Latency Avg 14 ms Max 41 ms Read Latency Avg 4.5 ms Max 12 ms People don't seem to be complaining too much about it being slow with those numbers. But how much higher could they get before people found it to be a problem? We are reviewing our head office systems due to running low on storage space, and are tossing up between buying a 2nd VM host with DAS or buying some sort of NAS for SMB file shares in the near term and maybe running VMs from it in the longer term. Currently we have just under 40 staff at head office with 9 smaller branches spread across the country. Head office is runnning in an MS RDS session based environment with linux ERP and mail systems. In total 22 VMs on a single host with DAS made from a RAID 10 made of 6x 15k SAS disks.

  Read the article

• Problem after resizing partition for Fedora under Vmware fusion

  - by user20196

  Hi, I am running FC9 under VMware Fusion 3.0 I wanted to resize my /dev/sda2 partition. In order to do that I did the following: 0. changed the size of the vmware file (under VMware settings). 1. rebooted the host to rescue mode without mounted disks 2. fdisk - removed & added /dev/sda2 - i had bigger /dev/sda2 3. lvm pvresize /dev/sda2 4. lvm pvdisplay - it showed me bigger size on /dev/VolGroup00 for /dev/sda2 5. lvm vgchange -a y - device-mapper: reload ioctl failed: Invalid argument - 2 logical volume(s) in volume group "VolGroup00" now active This is not true because there is no /dev/VolGroup00/LogVol00 My whole "/" disappeared. dmsetup table, shows: VolGroup00-LogVol01: 0 2097152 linear 8:2 38338944 VolGroup00-LogVol00: Can some one help me to solve this? Thank You.

  Read the article

• Using virt-install to mount multiple cdrom drives/images

  - by Dana the Sane

  I would like to create a windows xp guest from the windows xp upgrade cd I have, along with one of a few full versions I have around. However, when I reach the stage in the installer where I am prompted to insert a full version cd, the installer can't find it, i.e.: Setup could not read the CD you inserted, or the CD is not a valid Windows CD.. Is there a work-around for this?, my Googling didn't uncover anything. I've tried various combinations of mounting .iso files and specifying disks, such as: $sudo virt-install --accelerate --connect qemu:///system -n xpsp1 -r 2048 --disk ./vm/winxp_sp1.iso,device=cdrom --disk ./vm/windows.qcow2,size=12 --vnc --noautoconsole --os-type windows --os-variant winxp --vcpus 2 -c /dev/cdrom --check-cpu If I try to specify multiple cdrom drives, I receive an error: virt-install --accelerate --connect qemu:///system -n xpsp1 -r 2048 --disk ./vm/winxp_sp1.iso,device=cdrom --disk /dev/cdrom,device=cdrom --disk ./vm/windows.qcow2,size=12 --vnc --noautoconsole --os-type windows --os-variant winxp --vcpus 2 --check-cpu Starting install... ERROR IDE CDROM must use 'hdc', but target in use.

  Read the article

• External Hard-Drive Randomly Ejects; Stays On

  - by Kaleb F.

  My 250GB I/O Magic USB external hard-drive randomly disconnects / ejects from the computer after between 2-30 minutes of use. When this happens, the blinking activity light on the front of the hdd turns off; however, the disks can still be heard spinning. Unplugging & replugging in the USB does not reconnect the device and the activity light remains unlit. The only way to continue using it is to flip off then on the power switch of the hdd. The hard-drive was formatted with MBR partition table and 2 NTFS volumes. I recently tried switching to GUID with two Mac OS Extended (Journaled), but the problem remains. This error occurs with my new Macbook Pro with Snow Leopard as well as with my DELL E520 with Windows 7 Ultimate.

  Read the article

• Cannot install .NET Framework 4.0 on Windows XP SP3

  - by Bob

  I'm using Windows XP SP3 logged in as the administrator. I had RAID Mirroring running. The motherboard broke earlier in the year. When I got a new battery I did not resync. I just use the disks as two separate disks. I searched Google for the errors but I didn't find anything detailed enough. The following Microsoft components are in Add/Remove programs: .NET Framework 1.1 .NET Framework 2.0 Service Pack 2 .NET Framework 3.0 Service Pack 2 .NET Framework 3.5 SP1 Microsoft Compression Client Pack 1.0 for Windows XP Microsoft Office Enterprise 2007 Microsoft Silverlight Microsoft USB Flash Driver Manager Micrsoft User-mode Driver Framework Feature Pack 1.0 Microsoft Visual C++ 2005 ATL Update KB 973923 x86 8.050727.4053 Microsoft Visual C++ 2005 Redistributable This is the installation log: Exists: evaluating... [10/21/2011, 22:17:14]MsiGetProductInfo with product code {3C3901C5-3455-3E0A-A214-0B093A5070A6} found no matches [10/21/2011, 22:17:14] Exists evaluated to false [10/21/2011, 22:15:50]calling PerformAction on an installing performer [10/21/2011, 22:15:50] Action: Performing actions on all Items... [10/21/2011, 22:15:50]Wait for Item (clr_optimization_v2.0.50727_32) to be available [10/21/2011, 22:15:50]clr_optimization_v2.0.50727_32 is now available to install [10/21/2011, 22:15:50]Creating new Performer for ServiceControl item [10/21/2011, 22:15:50] Action: ServiceControl - Stop clr_optimization_v2.0.50727_32... [10/21/2011, 22:15:50]ServiceControl operation succeeded! [10/21/2011, 22:15:50] Action complete [10/21/2011, 22:15:50]Error 0 is mapped to Custom Error: [10/21/2011, 22:15:50]Wait for Item (Windows6.0-KB956250-v6001-x86.msu) to be available [10/21/2011, 22:15:51]Windows6.0-KB956250-v6001-x86.msu is now available to install [10/21/2011, 22:15:51]Created new DoNothingPerformer for File item [10/21/2011, 22:15:51]No CustomError defined for this item. [10/21/2011, 22:15:51]Wait for Item (Windows6.1-KB958488-v6001-x86.msu) to be available [10/21/2011, 22:15:51]Windows6.1-KB958488-v6001-x86.msu is now available to install [10/21/2011, 22:15:51]Created new DoNothingPerformer for File item [10/21/2011, 22:15:51]No CustomError defined for this item. [10/21/2011, 22:15:51]Wait for Item (netfx_Core.mzz) to be available [10/21/2011, 22:15:52]netfx_Core.mzz is now available to install [10/21/2011, 22:15:52]Created new DoNothingPerformer for File item [10/21/2011, 22:15:52]No CustomError defined for this item. [10/21/2011, 22:15:52]Wait for Item (netfx_Core_x86.msi) to be available [10/21/2011, 22:15:52]netfx_Core_x86.msi is now available to install [10/21/2011, 22:15:52]Creating new Performer for MSI item [10/21/2011, 22:15:52] Action: Performing Action on MSI at F:\DOCUME~1\Owner\LOCALS~1\Temp\Microsoft .NET Framework 4 Client Profile Setup_4.0.30319\netfx_Core_x86.msi... [10/21/2011, 22:15:52]Log File F:\DOCUME~1\Owner\LOCALS~1\Temp\Microsoft .NET Framework 4 Client Profile Setup_20111021_221545515-MSI_netfx_Core_x86.msi.txt does not yet exist but may do at Watson upload time [10/21/2011, 22:15:52]Calling MsiInstallProduct(F:\DOCUME~1\Owner\LOCALS~1\Temp\Microsoft .NET Framework 4 Client Profile Setup_4.0.30319\netfx_Core_x86.msi, EXTUI=1 [10/21/2011, 22:17:14]MSI (F:\DOCUME~1\Owner\LOCALS~1\Temp\Microsoft .NET Framework 4 Client Profile Setup_4.0.30319\netfx_Core_x86.msi) Installation failed. Msi Log: Microsoft .NET Framework 4 Client Profile Setup_20111021_221545515-MSI_netfx_Core_x86.msi.txt [10/21/2011, 22:17:14]PerformOperation returned 1603 (translates to HRESULT = 0x80070643) [10/21/2011, 22:17:14] Action complete [10/21/2011, 22:17:14]OnFailureBehavior for this item is to Rollback. [10/21/2011, 22:17:14] Action: Performing actions on all Items... [10/21/2011, 22:17:14] Action complete [10/21/2011, 22:17:14] Action complete [10/21/2011, 22:17:14]Final Result: Installation failed with error code: (0x80070643), "Fatal error during installation. " (Elapsed time: 0 00:01:29). [10/21/2011, 22:17:41]WM_ACTIVATEAPP: Focus stealer's windows WAS visible, NOT taking back focus SECOND LOG REQUESTED BELOW: MSI (s) (6C:EC) [22:17:13:828]: Invoking remote custom action. DLL: F:\WINDOWS\Installer\MSIBB4.tmp, Entrypoint: NgenUpdateHighestVersionRollback MSI (s) (6C:64) [22:17:13:984]: Executing op: ActionStart(Name=CA_NgenRemoveNicPFROs_I_DEF_x86.3643236F_FC70_11D3_A536_0090278A1BB8,,) MSI (s) (6C:64) [22:17:13:984]: Executing op: ActionStart(Name=CA_NgenRemoveNicPFROs_I_RB_x86.3643236F_FC70_11D3_A536_0090278A1BB8,,) MSI (s) (6C:64) [22:17:13:984]: Executing op: CustomActionRollback(Action=CA_NgenRemoveNicPFROs_I_RB_x86.3643236F_FC70_11D3_A536_0090278A1BB8,ActionType=17729,Source=BinaryData,Target=NgenRemoveNicPFROs,) MSI (s) (6C:AC) [22:17:13:984]: Invoking remote custom action. DLL: F:\WINDOWS\Installer\MSIBB5.tmp, Entrypoint: NgenRemoveNicPFROs MSI (s) (6C:64) [22:17:14:000]: Executing op: End(Checksum=0,ProgressTotalHDWord=0,ProgressTotalLDWord=0) MSI (s) (6C:64) [22:17:14:000]: Error in rollback skipped. Return: 5 MSI (s) (6C:64) [22:17:14:015]: No System Restore sequence number for this installation. MSI (s) (6C:64) [22:17:14:015]: Unlocking Server MSI (s) (6C:64) [22:17:14:015]: PROPERTY CHANGE: Deleting UpdateStarted property. Its current value is '1'. MSI (s) (6C:64) [22:17:14:031]: Note: 1: 1708 MSI (s) (6C:64) [22:17:14:031]: Product: Microsoft .NET Framework 4 Client Profile -- Installation failed. MSI (s) (6C:64) [22:17:14:078]: Cleaning up uninstalled install packages, if any exist MSI (s) (6C:64) [22:17:14:078]: MainEngineThread is returning 1603 MSI (s) (6C:EC) [22:17:14:171]: Destroying RemoteAPI object. MSI (s) (6C:9C) [22:17:14:171]: Custom Action Manager thread ending. MSI (c) (F4:C4) [22:17:14:203]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1 MSI (c) (F4:C4) [22:17:14:203]: MainEngineThread is returning 1603 === Verbose logging stopped: 10/21/2011 22:17:14 ===

  Read the article

• LSI RAID-on-chip with RAID6 over two SAS links goes red when HDD enclosure is powered cycled; how to recover?

  - by GregC

  I have a RAID6 array managed by LSI 9286-8e card. I also have Sans Digital 24-bay NexentaSTOR JBOD enclosure with SAS extender built-in. They are connected to separate UPS devices. Normally, I'd shut down the PC, leaving RAID6 in healthy state. But today the power to JBOD enclosure was cut but PC kept running. After restarting the PC, all disks in RAID6 have lit up RED, and the only option in LSI MegaRAID manager app was to reset each disk to unassigned, thereby loosing all data on RAID6 array. Thankfully, I am only testing, but how would I recover if this were to happen in production?

  Read the article

• 12.04 ext4 - cannot create regular file/No space left - with a lot of space and inodes

  - by user1434058

  This seems similar: EXT4 "No space left on device (28)" incorrect but there is no explanation I created an ext4 filesystem on a RAID 1 array with: mke2fs -t ext4 -T small /dev/md0 Copying a single directory with many tiny files I get: cp: cannot create regular file `/mnt/raid1_new/pics/pic3412.jpg': No space left on device space used 5% inodes used 1% I manually tried: cp /source/test1.jpg /mnt/raid1_new/pics/test1.jpg --- error cp /source/test1.jpg /mnt/raid1_new/pics/test2.jpg --- ERROR cp /source/test1.jpg /mnt/raid1_new/pics/test3.jpg --- no error Notes: RAID 1 disks are error free. I tried mv instead of cp and got the same thing. I tried omitting -T small with no effect Can somebody help me understand this magic?

  Read the article

• Can't Install Windows 2008 R2 on Lenovo Laptop With SSD

  - by Ben

  I am trying to install Windows Server 2008 R2 on a new Lenovo X201 or T410 laptop. Setup halts with the following pop-up: A required CD/DVD device driver is missing. If you have a driver floppy disk, CD, DVD, or USB flash drive, please insert it now. Note: If the windows installation media is in the CD/DVD drive you can safely remove it for this step. The CD drive is obviously working, as it's booting from CD to get to this point. The only thing I can think is that it is to do with the fact they have SSD disks in - but that's just a guess. (Edit - One extra thing that may or may not be relevant: it's the 64 bit version of Server 2008 R2)

  Read the article

• Iomega Home Media Network Hard Drive: Accesing the data in the disk?

  - by JJarava

  Hi all! I have an Iomega Home Media Network Hard Drive, 1TB, and lately I can't access the data on the drive. The shares (both built-in and created by me) are there, the security works, but when trying to access the data I get a "The network path was not found" message which is worrying, to say the least. I'd like to know if there is a way to get the data off the disks somehow, as some of the data in the drive (ie, pictures and videos of my 1.5 yrs old son) is hard if not impossible to find otherwise. Thanks a lot Javier

  Read the article

• Device cannot be added on software-raid-1 array on Ubuntu 12.04

  - by George Pligor

  Unfortunately all tutorials I have found online until now on how to setup software-raid-1 are outdated on ubuntu 12.40 My target is to setup it on a system with a secondary disk drive that is already running. Format is not an option! I am trying to follow and adapt from 11.10 to 12.04 the following tutorial: http://www.howtoforge.com/how-to-set-up-software-raid1-on-a-running-lvm-system-incl-grub2-configuration-ubuntu-11.10-p2 On the above tutorial there is a successful command which creates a raid-1 array by setting the first disk drive with the installed system as missing: mdadm --create /dev/md0 --level=1 --raid-disks=2 missing /dev/sdb1 But when the time comes to add the first main drive with the installed system on the raid-array with this command: mdadm --add /dev/md0 /dev/sda1 I receive an error message. The error message says that the device /dev/sda is (which makes sense) busy! Note: hardware raid solution is not available since the system is a laptop with two disk drives! Thank you

  Read the article

• How to know which block device maps to which physical drive

  - by Karolis T.

  I have a server with software RAID 1, two hot-swap sata disks. One hard drive started showing errors, I'm thinking about removing and replacing it, only problem is that I have no idea which of the two correspond to which devices. And I can't shut the server down to find out. I have /dev/sda and /dev/sdb, /dev/sda is the failing one. Thought about doing something along the lines # mdadm --manage /dev/md0 --remove /dev/sda1 then somehow stop/suspend the drive using tuning software and try to listen which of the two stopped, but that's not gonna work in a noisy server environment. Drive panels have no LEDs. Thanks for any ideas!

  Read the article

• Windows FAT/NTFS Low-Level Disk Viewer (Norton DiskEdit alternative)

  - by Synetech inc.

  Hi, One of my most valuable software tools has always been Norton DiskEdit from Norton Utilities/Symantec Systemworks. I have used it for years for so many things, including, but not limited to learning file-systems. I am now in search of a similar tool that can let me view FAT and NTFS disks at a low and high level under Windows. I have seen Runtime Software’s DiskExplorer, but unfortunately, it is limited in a number of ways, particularly annoying is that it does not really let you view the disk as structured (it does not let you see directory entries from a directory that is fragmented like DiskEdit can without doing a too-exhaustive scan which doesn’t even work for FAT partitions that have cluster sizes <4KB). Does anyone know of a Windows alternative of a Norton DiskEditor? Thanks a lot.

  Read the article

• Oracle on NFS vmdk beats native NFS!?

  - by fletch00

  Hi, my colleagues are pursuing this with Netapp and Oracle - but I thought I'd post here on the off chance someone else has seen this We have a RedHat 5 VM (fully up2date) running Oracle 11i with data disks mounted via the VM's linux kernel NFS using Oracle's recommended mount options and the performance is very inconsistent (Querys that should take < 2 seconds sometimes take 60 seconds) Funny thing is we can run the same queries perfectly consistently < 2 seconds on a VMDK residing on SAME NetApp NFS datastore! Makes me wish Oracle and NetApp collaborated as closely as VMware and NetApp did on the Virtual Storage Console we used to perfectly set the NFS options and keep them in compliance... We have tried a few Linux NFS options others have posted and not seen improvement so far. We are now creating VMDK's for the VM to replace the Linux NFS mounted and workaround the issue as our developers need consistent performance ASAP.

  Read the article

• What usb-bootable utility should I use to copy SATA hard drives?

  - by Steve Brown

  I have a computer that only has two SATA connections and I need to copy one SATA hard drive to another. Since I have to unplug the CD drive to copy the drives I need a USB-bootable utility. I have an old school copy of Norton Ghost (CD based): Ghost has always worked well for me in the past - I see there is a new "version 15" out but I'm not sure if it is worth buying. A friend has Acronis True Image on a USB drive: We tried to use that on the computer but it was unable to copy both partitions (restore partition and main partition). Of course there may be some problem with the drive that is keeping Acronis from working (it is just exiting with a lame error about not being able to copy the disks and no error code or detailed information), but I'm interested in knowing if there is a better, more solid, or widely used solution that I should invest in. What usb-bootable utilities can I use to copy SATA hard drives?

  Read the article

• Windows 7 Disk Management Spanned Volume vs Striped Volume

  - by Kairan

  Im looking for a reason why a person would use a Spanned volume rather than a Striped volume? If my understanding is correct Striped: Faster read/write speed than spanned, but I "assume" more wear+tear Spanned: No speed benefit like striped, but data is written sequentially and fills up Drive1 before filling up Drive2, so it saves on wear+tear Beyond that Im not sure if there is any other deciding factor on which to use. Definition found below: A striped volume uses the free space on more than one physical hard disk to create a bigger volume. Unlike a spanned volume, a striped volume writes across all volumes in the stripe in small blocks, distributing the load across the disks in the volume. The portions of disk used to create the volume need to be the same size; the size of the smallest free space included in the striped volume will determine.

  Read the article

• Slow NFS transfer performance of small files

  - by Arie K

  I'm using Openfiler 2.3 on an HP ML370 G5, Smart Array P400, SAS disks combined using RAID 1+0. I set up an NFS share from ext3 partition using Openfiler's web based configuration, and I succeeded to mount the share from another host. Both host are connected using dedicated gigabit link. Simple benchmark using dd: $ dd if=/dev/zero of=outfile bs=1000 count=2000000 2000000+0 records in 2000000+0 records out 2000000000 bytes (2.0 GB) copied, 34.4737 s, 58.0 MB/s I see it can achieve moderate transfer speed (58.0 MB/s). But if I copy a directory containing many small files (.php and .jpg, around 1-4 kB per file) of total size ~300 MB, the cp process ends in about 10 minutes. Is NFS not suitable for small file transfer like above case? Or is there some parameters that must be adjusted?

  Read the article

• Convert Spanned Dynamic disk to Basic Help needed.

  - by Mouradb

  Hello all, Here is my scenario; Windows 2008 server on a VM Two VM disks; Disk1 OS Basic Disk2 Data and an Installed Application. Basic Durng the weekend, I was playing with this VM, I wanted to add some space to the Disk2. Created a new disk (disk3), converted it to a Dynamic volum and added this to disk 2 (disk 2 also converted to Dynamic volume) and for some reason these now are spanned volumes. just like an IDOT, I haven't taken any snapshot of this before I've made the changes. My question, is there a way I can re-convert this again to Basic? I don't want to delete and recreate the disk volumes because of the application installed on the disk 2 Any solution or tips I can use?

  Read the article

• Convert Spanned Dynamic disk to Basic Help needed.

  - by Mouradb

  Hello all, Here is my scenario; Windows 2008 server on a VM Two VM disks; Disk1 OS Basic Disk2 Data and an Installed Application. Basic Durng the weekend, I was playing with this VM, I wanted to add some space to the Disk2. Created a new disk (disk3), converted it to a Dynamic volum and added this to disk 2 (disk 2 also converted to Dynamic volume) and for some reason these now are spanned volumes. just like an IDOT, I haven't taken any snapshot of this before I've made the changes. My question, is there a way I can re-convert this again to Basic? I don't want to delete and recreate the disk volumes because of the application installed on the disk 2 Any solution or tips I can use?

  Read the article

< Previous Page | 29 30 31 32 33 34 35 36 37 38 39 40  | Next Page >