Search Results

Search found 1261 results on 51 pages for 'mask'.

Page 34/51 | < Previous Page | 30 31 32 33 34 35 36 37 38 39 40 41  | Next Page >

• codesniffer command not being recognized after several installs and upgrades

  - by numerical25

  I've tried to install codesniffer using pear but my mac is not recognizing the phpcs command. pear config Configuration (channel pear.php.net): ===================================== Auto-discover new Channels auto_discover 1 Default Channel default_channel pear.php.net HTTP Proxy Server Address http_proxy <not set> PEAR server [DEPRECATED] master_server pear.php.net Default Channel Mirror preferred_mirror pear.php.net Remote Configuration File remote_config <not set> PEAR executables directory bin_dir /usr/local/pear/bin PEAR documentation directory doc_dir /usr/local/pear/docs PHP extension directory ext_dir /opt/local/lib/php/extensions/no-debug-non-zts-20090626 PEAR directory php_dir /usr/local/pear/share/pear PEAR Installer cache directory cache_dir /private/tmp/pear/cache PEAR configuration file cfg_dir /usr/local/pear/cfg directory PEAR data directory data_dir /usr/local/pear/data PEAR Installer download download_dir /tmp/pear/install directory PHP CLI/CGI binary php_bin /opt/local/bin/php php.ini location php_ini /opt/local/etc/php5/php.ini-development --program-prefix passed to php_prefix <not set> PHP's ./configure --program-suffix passed to php_suffix <not set> PHP's ./configure PEAR Installer temp directory temp_dir /tmp/pear/install PEAR test directory test_dir /usr/local/pear/tests PEAR www files directory www_dir /usr/local/pear/www Cache TimeToLive cache_ttl 3600 Preferred Package State preferred_state stable Unix file mask umask 22 Debug Log Level verbose 1 PEAR password (for password <not set> maintainers) Signature Handling Program sig_bin /usr/local/bin/gpg Signature Key Directory sig_keydir /opt/local/etc/pearkeys Signature Key Id sig_keyid <not set> Package Signature Type sig_type gpg PEAR username (for username <not set> maintainers) User Configuration File Filename /Users/anthonygordon/.pearrc System Configuration File Filename /opt/local/etc/pear.conf i checked php_bin and the php executable is there. when i run phpcs i get command not found Ive tried to upgrade pear, uninstall reinstall code sniffer, everything. when i run installs list i get Pear List Package Version State Archive_Tar 1.3.10 stable Console_Getopt 1.3.1 stable PEAR 1.9.4 stable PHP_CodeSniffer 1.4.0 stable Structures_Graph 1.0.4 stable XML_Util 1.2.1 stable

  Read the article

• DSL PPPoE connection not working?

  - by Mussnoon

  I use a wired PPPoE connection to connect to the Internet. What I need to do on Windows to connect to it is put in static IP address, gateway, subnet mask and DNS servers for my LAN card. Next I have to create a dialer for a PPPoE connection, put in my user name, the service name and the password, and "dial" this connection. And it works fine. On Ubuntu 10.04, however, I have tried setting things up in a similar fashion - put in all static addresses for the "automatic" wired connection, then put in user name, service name, password for a "DSL" connection. It worked for a while, then stopped. I have tried putting in all the details within the DSL configuration dialog, same thing happened - it worked for a while, then stopped. I have tried deleting the ethernet connection and only keeping the DSL one with all the numbers put in place, same thing happened - it worked for a while, then stopped. Each of the times, when it connected, it connected randomly, after trying a few times, and either stopped working within a few minutes, or after I had rebooted. I have deleted and remade the connection dozens of times - even with different names, but nothing seems to be working. I have also tried pppoeconf from the terminal, didn't work. I have checked /var/log/kern.log, but nothing changes in the file when I try to connect. I have also checked /sbin/route, but gedit can't even open it (says it can't figure the character encoding...). The "connection established" notification pops up from the top right corner, the same way as when the computer is actually connected to a network. Can anyone figure what's wrong and how it can be solved?

  Read the article

• Wired Network not working on Ubuntu 11.10 + Strange Behavior with Manual Conf

  - by Mauricio Cruz

  I'm new to Ubuntu - to be honest this is my very first day trying it... and I've already spent hours trying to make my wired connection work. I've been using this wired network with Windows and OSX, and in both systems I also had some trouble trying to connect in the past (and the troubleshooters did their magic and helped me get connected). Today, this is what I got: I'm running Ubuntu 11.10; ifconfig: eth0 Link encap:Ethernet HWaddr 78:2b:cb:c3:bf:8f UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:1 errors:0 dropped:0 overruns:0 frame:0 TX packets:343 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:70 (70.0 B) TX bytes:63273 (63.2 KB) Interrupt:20 Memory:e2e00000-e2e20000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1859 errors:0 dropped:0 overruns:0 frame:0 TX packets:1859 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:149368 (149.3 KB) TX bytes:149368 (149.3 KB) wlan0 Link encap:Ethernet HWaddr 10:0b:a9:82:55:c0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:15484 errors:0 dropped:0 overruns:0 frame:0 TX packets:16871 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:12048377 (12.0 MB) TX bytes:2677679 (2.6 MB) I also have some information from Windows ipconfig /all that I ran at my friend's machine Ipv6 Address: <address> preferential Ipv4 Address: 172.26.65.23 <preferential> Netmask: 255.255.254.0 Default Gateway: 172.26.64.1 DHCP Server : <address> DNS Servers : <address> DNS Suffix : <suffix> The weird thing is that I've tried to configure everything manually, using "Network Connections". When I add everything inside IPv4 Settings, the connection is finally successful, but only for 4~5 seconds before getting disconnected again... Update:I just changed the Connection Method to "Local-Link Only", and the same described above happens: At first, it says "Connection Stablished", but after a few seconds, the wired network gets disconnected. I hope someone can help me get connected! Thanks!

  Read the article

• Host is unreacheble with static networking configuration via /etc/network/interfaces while GUI NetworkManager is ok

  - by Riccardo

  I have some trouble setting-up the network interface using the static IP configuration. I run ubuntu 12.04 kernel 3.11.0-22 with the back-ports enabled. I followed these instructions from help.ubuntu.com but there seems to exist some conflict between the GUI approach (NetworkManager) and the command line approach. $ sudo nano /etc/network/interfaces auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 10.1.1.50 gateway 10.1.1.10 netmask 255.255.255.0 dns-nameservers 192.168.3.45 192.168.8.10 $ sudo /etc/init.d/networking restart I than try to ping for example google.com ping -c 3 www.google.com the response is that the host is unreachable. The icon on the top right of the desktop says: wired network disconnected. If I work using the GUI approach (Edit Connections and so on...) all works great. Can same one explain to me where I wrong? $ ifconfig eth0 eth0 Link encap:Ethernet HWaddr 90:e6:ba:07:4a:77 inet addr:10.1.1.50 Bcast:10.1.1.255 Mask:255.255.255.0 inet6 addr: fe80::92e6:baff:fe07:4a77/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:39619 errors:0 dropped:0 overruns:0 frame:0 TX packets:18520 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:19030895 (19.0 MB) TX bytes:2768769 (2.7 MB) $ netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 10.1.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0

  Read the article

• DSL connection not working in 10.04

  - by Mussnoon

  I use a wired PPPoE connection to connect to the Internet. What I need to do on Windows to connect to it is put in static IP address, gateway, subnet mask and DNS servers for my LAN card. Next I have to create a dialer for a PPPoE connection, put in my user name, the service name and the password, and "dial" this connection. And it works fine. On Ubuntu 10.04, however, I have tried setting things up in a similar fashion - put in all static addresses for the "automatic" wired connection, then put in user name, service name, password for a "DSL" connection. It worked for a while, then stopped. I have tried putting in all the details within the DSL configuration dialog, same thing happened - it worked for a while, then stopped. I have tried deleting the ethernet connection and only keeping the DSL one with all the numbers put in place, same thing happened - it worked for a while, then stopped. Each of the times, when it connected, it connected randomly, after trying a few times, and either stopped working within a few minutes, or after I had rebooted. I have deleted and remade the connection dozens of times - even with different names, but nothing seems to be working. I have also tried pppoeconf from the terminal, didn't work. I have checked /var/log/kern.log, but nothing changes in the file when I try to connect. I have also checked /sbin/route, but gedit can't even open it (says it can't figure the character encoding...). The "connection established" notification pops up from the top right corner, the same way as when the computer is actually connected to a network. Can anyone figure what's wrong and how it can be solved?

  Read the article

• Setting up shared connection

  - by Calvin Froedge

  I have a network that is connected to the internet via a switch connected to a router. I have it setup like this so I can work on the new network without causing problems on the old. Anyway, I'm trying to enable internet connection sharing. Internet comes to server like this: Modem - Router - Switch - Ubuntu 11.10 (Eth0) I want to share the connection through Eth1 (Eth1 - Managed Switch - Clients). Here is my config for /etc/network/interfaces: I have a DHCP server running on Eth1. Here is my config: ddns-update-style none; option domain-name "myserver.local"; option domain-name-servers 192.168.1.2, 8.8.8.8; default-lease-time 600; max-lease-time 7200; authoritative; subnet 192.168.1.0 netmask 255.255.255.0 { interface eth1; range 192.168.1.3 192.168.1.254; option routers 192.168.1.1; option subnet-mask 255.255.255.0; option broadcast-address 192.168.1.255; } Here is /etc/network/interfaces: # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet dhcp #Used for internal network auto eth1 iface eth1 inet static address 192.168.1.2 netmask 255.255.255.0 broadcast 192.168.1.255 network 192.168.1.0 Here is /etc/hosts: 127.0.0.1 localhost 127.0.1.1 myserver.isp.com server 192.168.1.2 server.myserver.local server myserver.local In /etc/sysctl.conf, I've set the following: net.ipv4.ip_forward=1 Finally, in /etc/rc.local, I've set the following: /sbin/iptables -P FORWARD ACCEPT /sbin/iptables --table nat -A POSTROUTING -o eth1 -j MASQUERADE When I ping 8.8.8.8 (google's DNS) from a client that is authenticated with my DHCP server (they have been assigned a local ip, like 192.168.1.10), I get a timeout. How can I debug this further to figure out where my problem is?

  Read the article

• Performance issues with visibility detection and object transparency

  - by maul

  I'm working on a 3d game that has a view similar to classic isometric games (diablo, etc.). One of the things I'm trying to implement is the effect of turning walls transparent when the player walks behind them. By itself this is not a huge issue, but I'm having trouble determining which walls should be transparent exactly. I can't use a circle or square mask. There are a lot of cases where the wall piece at the same (relative) position has different visibility depending on the surrounding area. With the help of a friend I came up with this algorithm: Create a grid around the player that contains a lot of "visibility points" (my game is semi tile-based so I create one point for every tile on the grid) - the size of the square's side is close to the radius where I make objects transparent. I found 6x6 to be a good value, so that's 36 visibility points total. For every visibility point on the grid, check if that point is in the player's line of sight. For every visibility point that is in the LOS, cast a ray from the camera to that point and mark all objects the ray hits as transparent. This algorithm works - not perfectly, but only requires some tuning - however this is very slow. As you can see, it requries 36 ray casts minimum, but most of the time 60-70 depending on the position. That's simply too much for the CPU. Is there a better way to do this? I'm using Unity 3D but I'm not looking for an engine-specific solution.

  Read the article

• DHCP server not starting

  - by Bruce

  I'm trying to set a DHCP server on 12.04. I installed: sudo apt-get install isc-dhcp-server My configuration files look like this: /etc/default/isc-dhcp-server INTERFACES="eth0" /etc/network/interfaces auto lo iface lo inet loopback /etc/dhcp/dhcpd.conf ddns-update-style none; default-lease-time 600; max-lease-time 7200; authoritative; log-facility local7; subnet 192.168.1.0 netmask 255.255.255.0 { range 192.168.1.235 192.168.1.240; option subnet-mask 255.255.255.0; option broadcast-address 192.168.1.255; option routers 192.168.1.1; default-lease-time 100000; max-lease-time 100000; } When I run sudo service isc-dhcp-server restart I get: stop: Unknown instance: isc-dhcp-server start/running, process 15384 After this if I run sudo service isc-dhcp-server status it shows that its stopped: isc-dhcp-server stop/waiting What am I doing wrong here?

  Read the article

• 2D Collision masks for handling slopes

  - by JiminyCricket

  I've been looking at the example at: http://create.msdn.com/en-US/education/catalog/tutorial/collision_2d_perpixel and am trying to figure out how to adjust the sprite once a collision has been detected. As David suggested at XNA 4.0 2D sidescroller variable terrain heightmap for walking/collision, I made a few sensor points (feet, sides, bottom center, etc.) and can easily detect when these points actually collide with non-transparent portions of a second texture (simple slope). I'm having trouble with the algorithm of how I would actually adjust the sprite position based on a collision. Say I detect a collision with the slope at the sprite's right foot. How can I scan the slope texture data to find the Y position to place the sprite's foot so it is no longer inside the slope? The way it is stored as a 1D array in the example is a bit confusing, should I try to store the data as a 2D array instead? For test purposes, I'm thinking of just using the slope texture alpha itself as a primitive and easy collision mask (no grass bits or anything besides a simple non-linear slope). Then, as in the example, I find the coordinates of any collisions between the slope texture and the sprite's sensors and mark these special sensor collisions as having occurred. Finally, in the case of moving up a slope, I would scan for the first transparent pixel above (in the texture's Ys at that X) the right foot collision point and set that as the new height of the sprite. I'm a little unclear also on when I should make these adjustments. Collisions are checked on every game.update() so would I quickly change the position of the sprite before the next update is called? I also noticed several people mention that it's best to separate collision checks horizontally and vertically, why is that exactly? Open to any suggestions if this is an inefficient or inaccurate way of handling this. I wish MSDN had provided an example of something like this, I didn't know it would be so much more complex than NES Mario style pure box platforming!

  Read the article

• Why is Samba Access from Windows So Slow?

  - by swalker2001

  I have set up a file server using Ubuntu 12.04 Server. The purpose is to serve several network drives to Windows users that have heretofore been served by numerous NAS drives. I have Samba set up with one share defined so far. I can connect to it fine from my test Windows 7 and Windows XP machines. When I do a directory listing on the share from Windows, it can take up to two minutes to get all the files listed--would have taken about 1.5 seconds when I was using the Buffalo NAS. Sometimes it times out with no response at all. I have used the default smb.conf and simply added the following for the share I have set up so far: [engineering] comment = Ubuntu File Server Share path = /networkdriveshares/engineering browsable = yes guest ok = yes read only = no create mask = 0755 I have tried changing the workgroup setting to the Active Domain name our Windows computer use but didn't notice any difference. The only other change I made to the default smb.conf was adding in the recommended socket settings: SO_RCVBUF=8192 SO_SNDBUF=8192 socket options = TCP_NODELAY Lots of information about slow Samba shares online but I have tried all of the solutions I have found and none have made a lick of difference. If there is no solution, is there a better way to set up a file server to be used by Windows clients?

  Read the article

• Have to run sudo dhclient eth0 automatically every boot

  - by Fyksen

  I just installed ubuntu 12.04.1 alternative install (for raid 0 on some disks). I Have some problems with the net. I'm at school, we use cable, and it got IPv6. If I run ifconfig eth0 heres my output: eth0 Link encap:Ethernet HWaddr e0:cb:4e:87:ff:db inet addr:128.39.194.217 Bcast:128.39.194.223 Mask:255.255.255.224 inet6 addr: 2001:700:1100:8008:e2cb:4eff:fe87:ffdb/64 Scope:Global inet6 addr: fe80::e2cb:4eff:fe87:ffdb/64 Scope:Link inet6 addr: 2001:700:1100:8008:48f7:c23:1d87:da6c/64 Scope:Global UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1063378 errors:0 dropped:0 overruns:0 frame:0 TX packets:489811 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1577173461 (1.5 GB) TX bytes:37043669 (37.0 MB) Interrupt:68 Base address:0x6000 My /etc/network/interfaces look like this: # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 # NetworkManager#iface eth0 inet dhcp # NetworkManager#hostname 2001:700:1100:1::4 # This is an autoconfigured IPv6 interface iface eth0 inet6 auto (I had to remove the hash tags, because of the BIGFONT i get on ask ubuntu) The "network manager" says that I'm not connected. Let me know if you need any more information. :)

  Read the article

• Samba issue with sharing directories on NTFS/FAT32

  - by Microkernel

  I have some strange problems with Samba server. I am using samba Version 3.5.4 on Ubuntu 10.10. I have two Windows XP machines, one on VirtualBox on Ubuntu and another office laptop. Windows machine on VirtualBox has no issues in accessing the shared folders, but the laptop is not able to access all the shared content. The issue faced on laptop is the following. Shared folders on ext3 drives have no issues in accessing, but the contents shared on NTFS and FAT32 drives (mounted ones) are not accessible. When I try to open the shared folder, it asks for user name and password, but doesn't accept when I provide it. (Even if I provide admin login details). I changed workgroup value to the domain_name in office laptop, but still the problem persists. Here is the smdb.conf I am using: [global] workgroup = XXX.XXX.ORG server string = %h server (Samba, Ubuntu) map to guest = Bad User obey pam restrictions = Yes pam password change = Yes passwd program = /usr/bin/passwd %u passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* . unix password sync = Yes syslog = 0 log file = /var/log/samba/log.%m max log size = 1000 dns proxy = No usershare allow guests = Yes panic action = /usr/share/samba/panic-action %d guest ok = Yes [homes] comment = Home Directories [printers] comment = All Printers path = /var/spool/samba read only = No create mask = 0700 printable = Yes browseable = No [print$] comment = Samba server's CD-ROM path = /cdrom force user = nobody force group = nobody locking = No Workgroup was defined as "HOMENET" before, changed it to domain name on the office laptop thinking it was the problem, but for no avail.

  Read the article

• Converting raw data type to enumerated type

  - by Jim Lahman

  There are times when an enumerated type is preferred over using the raw data type.  An example of using a scheme is when we need to check the health of x-ray gauges in use on a production line.  Rather than using a scheme like 0, 1 and 2, we can use an enumerated type: 1: /// <summary> 2: /// POR Healthy status indicator 3: /// </summary> 4: /// <remarks>The healthy status is for each POR x-ray gauge; each has its own status.</remarks> 5: [Flags] 6: public enum POR_HEALTH : short 7: { 8: /// <summary> 9: /// POR1 healthy status indicator 10: /// </summary> 11: POR1 = 0, 12: /// <summary> 13: /// POR2 healthy status indicator 14: /// </summary> 15: POR2 = 1, 16: /// <summary> 17: /// Both POR1 and POR2 healthy status indicator 18: /// </summary> 19: BOTH = 2 20: } By using the [Flags] attribute, we are treating the enumerated type as a bit mask.  We can then use bitwise operations such as AND, OR, NOT etc. . Now, when we want to check the health of a specific gauge, we would rather use the name of the gauge than the numeric identity; it makes for better reading and programming practice. To translate the numeric identity to the enumerated value, we use the Parse method of Enum class: POR_HEALTH GaugeHealth = (POR_HEALTH) Enum.Parse(typeof(POR_HEALTH), XrayMsg.Gauge_ID.ToString()); The Parse method creates an instance of the enumerated type.  Now, we can use the name of the gauge rather than the numeric identity: 1: if (GaugeHealth == POR_HEALTH.POR1 || GaugeHealth == POR_HEALTH.BOTH) 2: { 3: XrayHealthyTag.Name = Properties.Settings.Default.POR1XRayHealthyTag; 4: } 5: else if (GaugeHealth == POR_HEALTH.POR2) 6: { 7: XrayHealthyTag.Name = Properties.Settings.Default.POR2XRayHealthyTag; 8: }

  Read the article

• 12.04 wired network doesn't work RTL8111/8168B

  - by laket

  its a fresh 12.04 install 64bits. wifi works fine, wired stays off with cable connected and network-manager shows as if cable is disconnected. Turning off networking lights up my network-cards leds, turning networking on shuts off the leds and no communication is possible. I already tried, turning off the network-manager (sudo service network-manager stop) and setting up my eth0 manually, as soon as I switch off the network-manager my leds light up, but after setting up manually eth0 (sudo ifconfig eth0 10.2.10.114 netmask 255.255.0.0 up) the leds turn off again. I am still dual booting with 10.04 where I have no issues at all, leaving the cable connected all time to my notebook and a switch. Here is some hardware info: lshw: *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 03 serial: c8:0a:a9:d7:05:97 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=rtl_nic/rtl8168d-2.fw latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:42 ioport:2000(size=256) memory:f0004000-f0004fff memory:f0000000-f0003fff memory:f0010000-f001ffff lspci: 02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) ifconfig eth0: eth0 Link encap:Ethernet HWaddr c8:0a:a9:d7:05:97 inet addr:10.2.10.114 Bcast:10.2.255.255 Mask:255.255.0.0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:42 Base address:0xc000 cat /etc/network/interfaces: (already tried here with and w/o eth0) auto lo eth0 iface lo inet loopback cat /etc/NetworkManager/NetworkManager.conf [main] plugins=ifupdown,keyfile dns=dnsmasq [ifupdown] managed=false Any help is welcome ;) Laket

  Read the article

• Sharing an internet connection through the Ethernet port

  - by Bob Cunningham

  I have a small living room PC (Bohica, running fully-updated Ubuntu 10.10/Maverick) connected to my HDTV that I use for web browsing and media streaming. It connects via WiFi (wlan0) to my Fedora server (Snafu) that in turn connects to the internet. I use static addressing, and everything has been working fine. I just got a Blu-ray player, and I'd like to give it wired network access to the internet via Bohica's available wired ethernet port (eth0). So far, I haven't been to get eth0 and the network configured to get the Blu-ray player talking to the internet. Here's my wlan0 configuration: ip4 addr: 192.168.0.100 mask: /24 (255.255.255.0) gateway: 192.168.0.4 (fedora box) The Blu-ray player is set to an IP of 192.168.0.98/24, with the same gateway as above. I want eth0 set to an IP of 192.168.0.99/24, but when I do this using nm-connection-editor I lose internet access (the system tries to use eth0 as the default internet access interface). How do I get my blu-ray player to talk to the internet through Bohica, and do so without disrupting my current (working) network? Thanks. Edit: Here's the relevant output from nm-tool with the Blu-ray player connected: $ nm-tool NetworkManager Tool State: connected - Device: eth0 Type: Wired Driver: forcedeth State: disconnected Default: no HW Address: 90:FB:A6:2C:94:32 Capabilities: Carrier Detect: yes Speed: 100 Mb/s Wired Properties Carrier: on - Device: wlan0 [wlan0] Type: 802.11 WiFi Driver: ndiswrapper State: connected Default: yes HW Address: 00:26:5A:C0:D0:05 IPv4 Settings: Address: 192.168.0.100 Prefix: 24 (255.255.255.0) Gateway: 192.168.0.4

  Read the article

• Unable to access any ubuntu shares from android/windows clients

  - by dan

  I am running Ubuntu 11.04, and cant seem to access any of my shares. Here is the output from testparm-s : Load smb config files from /etc/samba/smb.conf rlimit_max: increasing rlimit_max (1024) to minimum Windows limit (16384) Processing section "[printers]" Processing section "[CanonMG2100AIO]" Processing section "[FreeAgent Drive]" Loaded services file OK. WARNING: You have some share names that are longer than 12 characters. These may not be accessible to some older clients. (Eg. Windows9x, WindowsMe, and smbclient prior to Samba 3.0.) Server role: ROLE_STANDALONE [global] server string = %h server (Samba, Ubuntu) encrypt passwords = No obey pam restrictions = Yes pam password change = Yes passwd program = /usr/bin/passwd %u passwd chat = Enter\snew\s\spassword:* %n\n Retype\snew\s\spassword:* %n\n password\supdated\ssuccessfully . username map = /etc/samba/smbusers unix password sync = Yes syslog = 0 log file = /var/log/samba/log.%m max log size = 1000 name resolve order = wins lmhosts host bcast dns proxy = No wins support = Yes usershare allow guests = Yes panic action = /usr/share/samba/panic-action %d [printers] comment = All Printers path = /var/spool/samba create mask = 0700 guest ok = Yes printable = Yes browseable = No [CanonMG2100AIO] comment = Printer Drivers path = /var/lib/samba/printers read only = No guest ok = Yes [FreeAgent Drive] path = /media/FreeAgent Drive read only = No guest ok = Yes smbtree: Server requested plaintext password but 'client plaintext auth' is disabled anonymous failed session setup with NT_STATUS_INVALID_PARAMETER Server requested plaintext password but 'client plaintext auth' is disabled anonymous failed session setup with NT_STATUS_INVALID_PARAMETER and hostname: dekstop I know the spelling of desktop is incorrect. it was a duh moment. Any help would be greatly appreciated.

  Read the article

• CUDA & MSI GT60 with Optimus enabled GTX670M?

  - by user1076693

  I have a MSI GT60 Laptop with an Optimus enabled GTX 670M GPU, and I have been trying to get CUDA going in Ubuntu 12.04 environment. I realize that Optimus is not supported in Linux, but I have read the following post suggesting that CUDA works for hybrid GPUs. How can I get nVidia CUDA or OpenCL working on a laptop with nVidia discrete card/Intel Integrated Graphics? I installed the NVIDIA driver via sudo add-apt-repository ppa:ubuntu-x-swat/x-updates sudo apt-get update sudo apt-get install nvidia-current The resulting driver version is 302.17, and supposedly GTX 670M is supported since 295.59. I also downloaded CUDA 4.2 from the NVIDIA site, and compiled it against nvidia-current libraries. Unfortunately, when I run deviceQuery in the CUDA SDK, I get the following output cudaGetDeviceCount returned 38 -> no CUDA-capable device is detected Checking /proc/driver/nvidia/gpus/0/information gives the following Model: GeForce GTX 670M IRQ: 16 GPU UUID: GPU-????????-????-????-????-???????????? Video BIOS: ??.??.??.??.?? Bus Type: PCI-E DMA Size: 32 bits DMA Mask: 0xffffffffff Bus Location: 0000:01.00.0 Here is the output of "lspci | grep VGA" 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation Device 1213 (rev ff) So... what am I doing wrong? Thanks!

  Read the article

• Printer share keeps asking for password and I can't authenticate from any machine. Why?

  - by tenshimsm

  Ubuntu 12.04 printer share keeps asking for password and I can't authenticate from any machine. Why?? We've installed it in two machine (to act as printer servers) and we get the same problem. It doesn't matter what we do, change or install. We can't figure out why the printer share asks for password even using all of the users that are registered in the server. What is wrong with Precise? I want it to work without a password, but it is not even working WITH one! I gave up! The samba version that comes with Precise is insufferable! I tried various settings that didn't work. I should've used Mint from the beginning. [Edit] My printers config. Remembering that samba is 3.6.3 in ubuntu 12.04 load printers = yes [printers] comment = All Printers browseable = yes path = /var/spool/samba printable = yes guest ok = yes readonly = yes create mask = 0700 [print$] comment = Printer Drivers path = /var/lib/samba/printers browseable = yes readonly = yes guest ok = yes

  Read the article

• Wired connection problem through router

  - by tommypincha

  I'm having trouble to connect my Ubuntu 11.10 to internet through ethernet. I installed a router to get Wi-Fi and now (by a wired connection) I can't have internet with ubuntu (but I can with Windows 7). I see several attempts per minute of the network-manager to get a connection, but after a minute it stops trying. Here are a couple of outputs from key files: cat /etc/network/interfaces auto lo iface lo inet loopback and ifconfig -a eth0 Link encap:Ethernet HWaddr 00:16:76:e4:a6:e8 inet6 addr: fe80::216:76ff:fee4:a6e8/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:117 dropped:0 overruns:0 frame:117 TX packets:50 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:12221 (12.2 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:582 errors:0 dropped:0 overruns:0 frame:0 TX packets:582 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:46024 (46.0 KB) TX bytes:46024 (46.0 KB) I tried reconnecting the modem and the router and reconnecting the ethernet cable but nothing... I tried other solutions from other posts (this one has a similar issue Wired connection not working) but again nothing. My IP is dynamic. A couple of things I see and did: I see no inet addr, only inet6. I ignored ipv6 from the internet connections, and restarted the network-manager service and nothing. A difference with the post I mentioned is the RX packets with errors I have, is this a clue of the problem? Any help would be appreciated, Thanks!

  Read the article

• Internet unusably slow with Realtek Semiconductor Co., Ltd. RTL8111/8168B card

  - by user42424

  So I have recently installed Ubuntu 11.10 for a dual boot with wind 7. After the install I had like 300 updates, so I installed them. At first I could use the internet, although it was extremely slow. However now I cannot, sometimes it will load and others it will simply time out. When I try to download something it will either take forever or will not at all. This is a wired system. On Windows side my speeds are fine. Any help would be greatly appreciated. Also like I said I am new to Linux/Ubuntu so please be nice. One last thing, I also installed 11.10 for same dual boot on my laptop, and wireless speed is the same as on Windows? Only the wired desktop gives me the problem? Hear is some hardware info.. Hope it helps. Mobo: Gigabyte GA=880GMA- AMD / CPU: AMD Phenom (tm) IIx4 965 / 16 GB Ram / Realtek PCIe GBE Family Controller / Cisco Linksys E2000 / Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) / eth0 Link encap:Ethernet HWaddr 50:e5:49:33:64:cf inet addr:192.168.1.118 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::52e5:49ff:fe33:64cf/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:76722 errors:0 dropped:76722 overruns:0 frame:76722 TX packets:49692 errors:0 dropped:65 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:107956638 (107.9 MB) TX bytes:4342553 (4.3 MB) Interrupt:44 Base address:0x2000 thanks to roadmr problem solved! I powered down PC, un plugged power from pc end, waited a few (maybe 3)minutes. plugged power back in, pushed and held power button for 30 + seconds. Let go, powered on PC, and my Internet is fine! downloads and web speed blaze, just like on my Win 7 boot, maybe even faster. Problem Solved, Thanks to all!! **

  Read the article

• Correcting Lighting in Stencil Reflections

  - by Reanimation

  I'm just playing around with OpenGL seeing how different methods of making shadows and reflections work. I've been following this tutorial which describes using GLUT_STENCIL's and MASK's to create a reasonable interpretation of a reflection. Following that and a bit of tweaking to get things to work, I've come up with the code below. Unfortunately, the lighting isn't correct when the reflection is created. glPushMatrix(); plane(); //draw plane that reflection appears on glColorMask(GL_FALSE, GL_FALSE, GL_FALSE, GL_FALSE); glDepthMask(GL_FALSE); glEnable(GL_STENCIL_TEST); glStencilFunc(GL_ALWAYS, 1, 0xFFFFFFFF); glStencilOp(GL_REPLACE, GL_REPLACE, GL_REPLACE); plane(); //draw plane that acts as clipping area for reflection glColorMask(GL_TRUE, GL_TRUE, GL_TRUE, GL_TRUE); glDepthMask(GL_TRUE); glStencilFunc(GL_EQUAL, 1, 0xFFFFFFFF); glStencilOp(GL_KEEP, GL_KEEP, GL_KEEP); glDisable(GL_DEPTH_TEST); glPushMatrix(); glScalef(1.0f, -1.0f, 1.0f); glTranslatef(0,2,0); glRotatef(180,0,1,0); sphere(radius, spherePos); //draw object that you want to have a reflection glPopMatrix(); glEnable(GL_DEPTH_TEST); glDisable(GL_STENCIL_TEST); sphere(radius, spherePos); //draw object that creates reflection glPopMatrix(); It looked really cool to start with, then I noticed that the light in the reflection isn't correct. I'm not sure that it's even a simple fix because effectively the reflection is also a sphere but I thought I'd ask here none-the-less. I've tried various rotations (seen above the first time the sphere is drawn) but it doesn't seem to work. I figure it needs to rotate around the Y and Z axis but that's not correct. Have I implemented the rotation wrong or is there a way to correct the lighting?

  Read the article

• Samba issue with sharing directories on NTFS/FAT32 (Mounted Drives) ???

  - by Microkernel

  Hi guys, I have some strange problems with Samba server. I am using samba Version 3.5.4 on Ubuntu 10.10. I have two windows-xp machines, one on VirtualBox on Ubuntu and another office laptop. Windows machine on VBox has no issues in accessing the shared folders, but the laptop is not able to access all the shared content. The issue faced on laptop is = Shared folders on Ext3 drives have no issues in accessing, but the contents shared on NTFS and FAT32 drives (mounted ones) are not accessible. When I try to open the shared folder, it asks for user name and password, but doesn't accept when I provide it. (even if I provide admin login details!!!). I changed workgroup value to the domain_name in office laptop, but still the problem persists... Here is the smdb.conf I am using... [global] workgroup = XXX.XXX.ORG server string = %h server (Samba, Ubuntu) map to guest = Bad User obey pam restrictions = Yes pam password change = Yes passwd program = /usr/bin/passwd %u passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* . unix password sync = Yes syslog = 0 log file = /var/log/samba/log.%m max log size = 1000 dns proxy = No usershare allow guests = Yes panic action = /usr/share/samba/panic-action %d guest ok = Yes [homes] comment = Home Directories [printers] comment = All Printers path = /var/spool/samba read only = No create mask = 0700 printable = Yes browseable = No [print$] comment = Samba server's CD-ROM path = /cdrom force user = nobody force group = nobody locking = No Workgroup Was defined as "HOMENET" before, changed it to domain name on the office laptop thinking it was the problem, but for no avail Thanks in advance Regards, Microkernel

  Read the article

• Wired card not connecting after trying to connect

  - by Mike

  I have an Ubuntu 12.10 PC. When I plug in my internet cable it starts connecting and after a minute it says it can't connect. I tried different cables but nothing works. Wlan works. I think it's the network driver but I don't know how to install/update it. Here's the ifconfig info (if it helps): eth0 Link encap:Ethernet HWaddr 00:01:6c:39:2a:8d inet6 addr: fe80::201:6cff:fe39:2a8d/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2011 errors:0 dropped:362 overruns:0 frame:0 TX packets:586 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:175452 (175.4 KB) TX bytes:147211 (147.2 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:9779 errors:0 dropped:0 overruns:0 frame:0 TX packets:9779 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:8460080 (8.4 MB) TX bytes:8460080 (8.4 MB) wlan0 Link encap:Ethernet HWaddr 08:10:74:35:99:9d inet6 addr: fe80::a10:74ff:fe35:999d/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:1790 errors:0 dropped:0 overruns:0 frame:0 TX packets:3250 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:401664 (401.6 KB) TX bytes:2898773 (2.8 MB)

  Read the article

• Kubuntu not showing eth0

  - by Laurbert515

  I just installed Kubuntu 12.04.2 and do not have an internet connection. I also cannot access the Desktop and only have the terminal. When I enter xlcock I get Error: Can't open display:. I believe this is because I do not have the correct drivers and need to download them ... using the internet which I can't access. So here's what's going on ... ifconfig gives: lo Link ecap: Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:16 errors:0 dropped:0 overrruns:0 frame:0 TX packets:16 errors:0 dropped:0 overrruns:0 frame:0 collisions:0 txqueuelen:0 RX bytes:1296 (1.2 KB) TX bytes:1296 (1.2 KB) wlan0 Link encap: Ethernet HWaddr 68:17:29:58:49:4a UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:16 errors:0 dropped:0 overrruns:0 frame:0 TX packets:16 errors:0 dropped:0 overrruns:0 frame:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) lspci -nnk gives: 07:00.0 Network Controller [0280] Intel Corporation Centrino Wireless-N 2230 [8086:0887] (rev c4) Subsystem: Intel Coporation Centrino Wireless-N 2230 BGN [8086:4062] Kernel driver in use: iwlwifi Kernel modules: iwlwifi 0d:00.0 Ethernet Controller [0200]: Atheros Communications Inc. AR8161 Gigabit Ethernet [1969:1091] (rev 10) Subsystem: Toshiba America Info Systems Device [1179:fa77] I believe this means that it is using the ethernet connection but thinks it is a wireless connection. sudo lshw -class network gives: *-network description: Wireless interface product: Centrino Wireless=N 2230 ... *network UNCLAIMED description: Ethernet controller product: AR8161 Gigabit Ethernet I want to get the internet working so I can fix the GPU driver, etc. but I can't seem to get it working even though I have my ethernet cable plugged in (and I'm sure it is working).

  Read the article

• ERROR #342: DEVICE_SHADER_LINKAGE_SEMANTICNAME_NOT_FOUND

  - by Telanor

  I've stared at this for at least half an hour now and I cannot figure out what directx is complaining about. I know this error normally means you put float3 instead of a float4 or something like that, but I've checked over and over and as far as I can tell, everything matches. This is the full error message: D3D11: ERROR: ID3D11DeviceContext::DrawIndexed: Input Assembler - Vertex Shader linkage error: Signatures between stages are incompatible. The input stage requires Semantic/Index (COLOR,0) as input, but it is not provided by the output stage. [ EXECUTION ERROR #342: DEVICE_SHADER_LINKAGE_SEMANTICNAME_NOT_FOUND ] This is the vertex shader's input signature as seen in PIX: // Input signature: // // Name Index Mask Register SysValue Format Used // -------------------- ----- ------ -------- -------- ------ ------ // POSITION 0 xyz 0 NONE float xyz // NORMAL 0 xyz 1 NONE float // COLOR 0 xyzw 2 NONE float The HLSL structure looks like this: struct VertexShaderInput { float3 Position : POSITION0; float3 Normal : NORMAL0; float4 Color: COLOR0; }; The input layout, from PIX, is: The C# structure holding the data looks like this: [StructLayout(LayoutKind.Sequential)] public struct PositionColored { public static int SizeInBytes = Marshal.SizeOf(typeof(PositionColored)); public static InputElement[] InputElements = new[] { new InputElement("POSITION", 0, Format.R32G32B32_Float, 0), new InputElement("NORMAL", 0, Format.R32G32B32_Float, 0), new InputElement("COLOR", 0, Format.R32G32B32A32_Float, 0) }; Vector3 position; Vector3 normal; Vector4 color; #region Properties ... #endregion public PositionColored(Vector3 position, Vector3 normal, Vector4 color) { this.position = position; this.normal = normal; this.color = color; } public override string ToString() { StringBuilder sb = new StringBuilder(base.ToString()); sb.Append(" Position="); sb.Append(position); sb.Append(" Color="); sb.Append(Color); return sb.ToString(); } } SizeInBytes comes out to 40, which is correct (4*3 + 4*3 + 4*4 = 40). Can anyone find where the mistake is?

  Read the article

< Previous Page | 30 31 32 33 34 35 36 37 38 39 40 41  | Next Page >