Search Results

Search found 11364 results on 455 pages for 'port blocking'.

Page 34/455 | < Previous Page | 30 31 32 33 34 35 36 37 38 39 40 41  | Next Page >

• Svchost.exe connecting to different IPs with remote port 445

  - by Coll911

  Im using Windows XP Professional SP2. Whenever I start my Windows, svchost.exe starts connecting to all the possible IPs on LAN like from 192.168.1.2 to 192.168.1.200. The local port ranges from 1000-1099 and the remote port being 445. After it's done with the local IPs, it starts connecting to other random IPs. I tried blocking connections to the port 445 using the local security polices but it didn't work. Is there any possible way I could prevent svchost from connecting to these IPs without involving any firewall installed? My PC slows down due to the load. I scanned my PC with MalwareBytes and found out it was infected with a worm, it's deleted now but still svchost is connecting to the IPs. I also found out that in my Windows Firewall settings, under Internet Control Message Protocol (ICMP), there's a tick on "allow incoming echo request" (usually disabled) which is locked and I can't disable it. Its description is as follows Messages sent to this computer will be repeated back to the sender. This is used for trouble shooting for e.g to ping a machine. Requests of this type are automatically allowed if TCP port 445 is enabled. Any solutions? I can't bear going with the reinstalling Windows phase again.

  Read the article

• I can't change mysql port (5.6.12) changing the lines of my.ini (windows 8)

  - by videador

  I was trying to change the port of my mysql server in my local machine but i can't. The version of mysql is 5.6.12, is an installation from wamp and I am on Windows 8. I change these lines in my my.ini file located in (C:\wamp\bin\mysql\mysql5.6.12). [client] #password = your_password port = 3307 socket = /tmp/mysql.sock [wampmysqld] port = 3307 socket = /tmp/mysql.sock key_buffer = 16M max_allowed_packet = 1M The previous values were 3306. Ok then I've reset the server installed, but it doesn't works, the mysql server is still running on 3306. Then, I rename the path of the services with this, to make sure that the my.ini is read by the mysql instance. c:\wamp\bin\mysql\mysql5.6.12\bin\mysqld.exe --defaults-file="C:\wamp\bin\mysql\mysql5.6.12\my.ini" wampmysqld But nothing, it stil doesn't works. My last bullet was to copy the content of my.ini to a file my-default.ini (a file that is placed in C:\wamp\bin\mysql\mysql5.6.12\ and that I don't know what is its mission). However it still doesn't work and the port is still 3306.

  Read the article

• Redirect traffic from 127.0.0.1 to 127.0.0.1 on port 53 to port 5300 with iptables

  - by Zagorax

  I'm running a local dns server on port 5300 to develop a software. I need my machine to use that dns but I wasn't able to tell /etc/resolv.conf to check on a different port. I searched a bit on google and I didn't find a solution. I set 127.0.0.1 as nameserver on /etc/resolv.conf. This is my whole /etc/resolv.conf: nameserver 127.0.0.1 Could you please tell me how can I redirect outbound traffic on port 53 to another port? I tried the following but it didn't work: iptables -t nat -A PREROUTING -p tcp --dport 53 -j DNAT --to 127.0.0.1:5300 iptables -t nat -A PREROUTING -p udp --dport 53 -j DNAT --to 127.0.0.1:5300 Here is the output of iptables -t nat -L -v -n (with suggested rules): Chain PREROUTING (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 0 0 REDIRECT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:53 redir ports 5300 0 0 REDIRECT udp -- * * 0.0.0.0/0 0.0.0.0/0 udp dpt:53 redir ports 5300 Chain POSTROUTING (policy ACCEPT 302 packets, 19213 bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy ACCEPT 302 packets, 19213 bytes) pkts bytes target prot opt in out source destination

  Read the article

• PortForwarding to IIS in Linux

  - by Simon

  Hi, I am trying to set up port forwarding on a linux box to a IIS webserver on my internal network. The web server sits on Windows 2003 Server. My linux box has eth0 - Internet connection eth1 - internal subnet (10.10.10.x) eth2 - 2nd internal subnet (129.168.0.x) dhcp interface my webserver is on the eth2 interface (192.168.0.6) I am doing port forwarding for port 80 with no avail. I use the same set of rules to port forward to a different webserver and it works. The webapplication is available on the internal network but not for external users. iptables -t nat -A PREROUTING -p tcp -i eth0 -d $PUBLIC_IP --dport 80 -j DNAT --to 192.168.0.6:80 iptables -A FORWARD -p tcp -i eth0 -o eth2 -d 192.168.0.6 --dport 80 -m state --state NEW -j ACCEPT iptables -A FORWARD -t filter -o eth0 -m state --state NEW,ESTABLISHED,RELATED -j ACCEPT iptables -A FORWARD -t filter -i eth0 -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE Any Ideas?

  Read the article

• One IP, One Port, Multiple Servers

  - by Adrian Godong

  I am looking for a solution to forward one public IP address and one specific port to different machines based on hostname (as of now, I need it only for HTTP). The current setup is NAT on a commodity router (it only provide simple public port to private IP address / port forwarding). I can add a Windows Server 2008 R2 machine before the router if required, but prefer not to do so. So ideally, I would like to have the current setup and the forwarding is done on one of the Windows Servers. Is it possible to do this?

  Read the article

• Custom BizTalk, Orchestration SMTP Adapter Dynamic send port

  How to build a BizTalk application that will allow run time configuration and sending of SMTP email from within an orchestration  read moreBy BiZTech KnowDid you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Dedicated NIC or dedicated port for iSCSI?

  - by Newt

  When spec'ing and configuring a machine that will utilise shared iSCSI storage, I've read a lot of documentation which suggests a dedicated network adapter should be used for iSCSI communication. That makes a lot of sense and I have no problem with it. The question I do have, is this - should that suggestion be taken to mean that a separate physical NIC should be used, or will a dedicated port/ports on a dual/quad port NIC be just as good? My suspicion is that simply using dedicated port(s) on a shared NIC would be just as good. Any input greatly appreciated.

  Read the article

• Port forwarding (portmap) works only locally

  - by Tag Wint

  There are four hosts hostA winXP hostB Win2003 hostC Linux RHEL hostD Linux RHEL hostA cannot connect to C and D directly, but B can hostA connects to hostB using VPN hostB and hostC belong to the same subnet1 hostD is in subnet2 From hostA I need to connect to hostC and hostD by SSH. Now I can do it as follows: 1.connecting from hostA to hostB by RDP logon and there: 2.start putty client. I'd like to omit step 1 and connect from A to C and D directly On hostB I have admin acoount and configure port forwarding as follows: netsh interface portproxy add v4tov4 listenport=N1 connectaddress=hostC_IP connectport=N2 netsh interface portproxy add v4tov4 listenport=N3 connectaddress=hostD_IP connectport=N2 netsh interface portproxy show all: Listen on IPv4: Connect to IPv4: Address Port Address Port --------------- ---------- --------------- ---------- * N1 hostC_IP N2 * N3 hostD_IP N2 Now from hostB I can connect to either C and D: ssh localhost:N1 ssh localhost:N3 from hostA ssh hostB:N1 works too, but ssh hostB:N3 DON'T I guess the reason might be different subnets, still have no idea how to fix it. What should I do?

  Read the article

• Re-Route Mail to a port other than 25

  - by Ken

  Is there a way to route mail to another port? I have an email account attached to my laptop that I'd like to be able to send and receive mail from. Due to mobility, I'll be passing through various networks that will probably block this port. My dynamic DNS provider allows me to utilize web-forwards for MX domains; is this possible? where I can web forward to a domain:port which is managed by my DNS provider when I traverse between networks. If not, is there a way? Of course i could use web-mail or relay-forwarding from my home server, but that's not geeky enough.

  Read the article

• Running multiple services on Port 443, Tunnel SSH over HTTPS

  - by lajuette

  Situation: I want to tunnel SSH sessions through HTTPS. I have a very restrictive firewall/proxy which only allows HTTP, FTP and HTTPS traffic. What works: Setting up a tunnel through the proxy to a remote linux box that has a sshd listening at port 443 The problem: I have to have a web server (lighty) running at port 443. HTTPS traffic to other ports is forbidden by the proxy. Ideas so far: Set up a virtual host and proxy all incoming requests to localhost: (e.g. 22) $HTTP["host"] == "tunnel.mylinux.box" { proxy.server = ( "" => (("host" => "127.0.0.1", "port" => 22)) ) } Unfortunately this won't work. Am i doing something wrong, or is there a reason, that this won't work?

  Read the article

• Trouble with setting up Mac SSH with TP-LINK router

  - by arxanas

  I have a Mac running OS X 10.7.2, and a TP-Link TL-WR740N (whose control panel looks like this). Remote Login is on in the Mac's System Preferences, and port 22 is set to forward on the router. I can access my Mac as a web server using the external IP on port 80, which I have set up through the same port-forwarding mechanism provided by the router, but when I try to ssh server@external-ip, it just times out after a long while. (The same thing happens when I try vnc.) I can, however, ssh and vnc successfully into that computer while I'm on the same network when using its internal IP. Since ssh appears to work and port forwarding appears to work, I can't figure out what's causing the problem. Does anyone have any idea what might cause this?

  Read the article

• Custom BizTalk, Orchestration SMTP Adapter Dynamic send port

  How to build a BizTalk application that will allow run time configuration and sending of SMTP email from within an orchestration  read moreBy BiZTech KnowDid you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Dell PR03X port replicator and DisplayPort to DVI adapter not detecting second monitor

  - by yothenberg

  I have a Dell M4400 connected to a PR03X port replicator/docking station. I use the DVI port to connect it to a first Dell 2208WFP monitor and I'm trying to use a DisplayPort-to-DVI adapter to connect it to a second Dell 2208WFP monitor. The second monitor, connected via the DisplayPort-to-DVI adapter immediately goes into sleep mode and the laptop doesn't detect it. What is really weird is that it did detect it the first time I plugged it in but after I unplugged the monitor and plugged it back in it stopped working. I swapped the monitors round and it detected them both but after unplugging the monitor connected via the DisplayPort-to-DVI and plugging it in again it stopped working. Both monitors work if plugged in directly to the DVI port. Is there some way to force re-detection? Any ideas?

  Read the article

• Syn_Recievd on port 80 , IIS 7.5

  - by Ashian

  Hi I have a trouble on my windows 2008 server. I host several web site on it. From some days ago, my web sites stop responding on port 80 after a while. In this time I can't access web sites from local machine and from remote. I can also browse websites on other ports ( custom port that I set) I find that I have many Syn_Received status on netstat. And when web sites stop, I got only syn_received on port 80. I have to restart server because when I try to restart IIS , it takes a long time to stop W3SVC and many times it doesn’t stop at all. Would anyone please tell me : - How can I manage Syn Attack ? Thanks

  Read the article

• Url rewriting stops working after changing default port on iis7

  - by Somesh

  I have migrated the IIS6 webserver 2003 websites to IIS7 webserver 2008 using msdeploy tool. Application pool setting are changed with "Enable 32-bit Applications=true", "Managed_Pipeline_Mode=Classic","Identity=NetworkService" Framework=v1.1/2.0. All the websites are working fine on default port along with url rewriting migrated from iis6. When I start the webserver on port other than default port by changing bindings, url rewriting stops workings and get 404 error in logs. I think I don't have to change the handler mapping cause I am running it in classic mode. How can I troubleshoot this?

  Read the article

• How can I get my routers to forward ports correctly?

  - by Giffyguy

  My network currently looks like this (simplified): Note that Router #2 is connected to the LAN interface of Router #1. This should be familiar to anyone who has seen a standard static-IP setup with an additional firewall for a residence or other small building. Router #1 is actually my cable gateway, but since it is a fully functional router/firewall, I am going to refer to it as a router. Now, I need to open various ports in both firewalls for incoming communication to my server - port 80 is a good example. So I've opened up port 80 in Router #2, and so far all incoming traffic at the public IP X.X.X.129 is being routed correctly. The problem is that I also need my server to respond to incoming traffic at the public IP X.X.X.130 on the WAN interface of Router #1. Naturally, I can't just tell Router #1 to forward port 80 to another public IP. Port forwarding is only supported when the traffic is being directed to the LAN subnet. I am willing to restructure my network topology if required, with the following conditions: Router #1 cannot have its WAN IP reassigned - X.X.X.130 is mandatory. Router #1 cannot be moved or disconnected from the cloud. The server cannot be given a second IP address. I would prefer the server to have a private IP address - e.g. 10.0.0.10 I'd like to keep Router #2, but it can have a private IP - e.g. 10.0.1.10 Following these rules, I need to get my server to receive incoming traffic on port 80 from both public IP addresses. Does anyone on SU know if this is possible? So far my only theories have been to set up a static route on either router, or to somehow combine my two subnets into a single subnet.

  Read the article

• tc: Linux HTTP Outgoing Traffic Shaping (Port 80 Traffic Shaping)

  <b>nixCraft:</b> "How do I limit bandwidth allocation to http service 5Mbps (burst to 8Mbps) at peak times so that DNS and other service will not go down due to heavy activity under Linux operating systems?"

  Read the article

• Cannot connect to postgresql on port 5432

  - by Assaf Lavie

  I installed the Bitnami Django stack which included PostgreSQL 8.4. When I run psql -U postgres I get the following error: psql: could not connect to server: No such file or directory Is the server running locally and accepting connections on Unix domain socket "/var/run/postgresql/.s.PGSQL.5432"? PG is definitely running and the pg_hba.conf file looks like this: # TYPE DATABASE USER CIDR-ADDRESS METHOD # "local" is for Unix domain socket connections only local all all md5 # IPv4 local connections: host all all 127.0.0.1/32 md5 # IPv6 local connections: host all all ::1/128 md5 What gives? "Proof" that pg is running: root@assaf-desktop:/home/assaf# ps axf | grep postgres 14338 ? S 0:00 /opt/djangostack-1.3-0/postgresql/bin/postgres -D /opt/djangostack-1.3-0/postgresql/data -p 5432 14347 ? Ss 0:00 \_ postgres: writer process 14348 ? Ss 0:00 \_ postgres: wal writer process 14349 ? Ss 0:00 \_ postgres: autovacuum launcher process 14350 ? Ss 0:00 \_ postgres: stats collector process 15139 pts/1 S+ 0:00 \_ grep --color=auto postgres root@assaf-desktop:/home/assaf# netstat -nltp | grep 5432 tcp 0 0 127.0.0.1:5432 0.0.0.0:* LISTEN 14338/postgres tcp6 0 0 ::1:5432 :::* LISTEN 14338/postgres root@assaf-desktop:/home/assaf#

  Read the article

• cannot send emails to other Web servers

  - by developer

  I'm trying to limit my server's open ports in CSF. The IPv4 port settings include: # Allow incoming TCP ports TCP_IN = "22,25,53,80,110,143,443,587,3654,53343” # Allow outgoing TCP ports TCP_OUT = "22,53,80,113,443,465,995,3654" # Allow incoming UDP ports UDP_IN = "53" # Allow outgoing UDP ports # To allow outgoing traceroute add 33434:33523 to this list UDP_OUT = "53,113,123" As you see, I have port 25 open in TCP_IN but have removed it from TCP_OUT. The reason is I wanted to have my mails transmitted over smtps, so I have port 465 opened instead in TCP_OUT. Since I am using Rouncube in Directpanel, I have also set the following in Rouncube's config.inc.php: $config['default_host'] = 'ssl://mail.mydomain.com'; $config['smtp_server'] = 'ssl://mail.mydomain.com'; $config['smtp_port'] = 465; However, when I remove port 25 from TCP_OUT, I no longer can send mails, say, to gmail, though I can send mails to own. But I can receive all mails. Please let me know if I need to make any further changes. Do I need to disable port 25 at all, to have my mails sent via ssl. Thanks

  Read the article

• How is virtual machine port opening works

  - by Xianlin

  I have a question regarding VM port. Say I have a Virtual Machine and a Host Machine. The opening ports on Host are 80, 22, 443 only. if I opened ports 80, 22, 443 VM it should be working. However if I opened port 21 on VM, will it work? If it works, does it mean the port 21 on Host is opened also? My understanding is that the network traffic goes from VM's virtual network adapter to Host's physical network adapter. So the ports on these 2 network adapters should match. Am I correct to say this?

  Read the article

• Unable to outside access service from inside LAN

  - by erotsppa

  I have a weird port forwarding problem. I tried to open my port 22 to the outside network. I was able to access it as long as I am not inside the LAN. I can access it from my office for example. But from within the LAN, I can access the port using the local ip, but I can't access the port using the external IP. It's as if the router is blocking the loopback. I've check all my router settings, turned off anything firewall/filtering related. Any ideas?

  Read the article

• forwarding port 3306 on macosx in order to connect to a remote mysql db

  - by Jonathan Mayhak

  I'm on macosx 10.6.2 trying to connect to ubuntu server 8.04.1 at linode. ssh -L 127.0.0.1:3306:[[remote ip]]:3306 user@server -N I want to set up ssh tunneling so that I can access a remote mysql server. First of all, I'm told bind: Address already in use. This is only after I've tried the command before. How do I manually close a port forwarding session? Second, when I change the command to be ssh -L 127.0.0.1:3310:[[remote ip]]:3306 user@server -N (I changed the local port to listen on). I'm told channel 1: open failed: connect failed: Connection refused when I try to connect to the mysql server via mysql workbench or sequel pro. To connect through mysql workbench I use the following settings: host: 127.0.0.1 port: 3310 (if 3306 is in use) username: mysql username password: mysql password database: I don't put anything in

  Read the article

• Forwarding port 3306 on Mac OS X in order to connect to a remote MySQL Database

  - by Jonathan Mayhak

  I'm on Mac OS X 10.6.2 trying to connect to ubuntu server 8.04.1 at linode. ssh -L 127.0.0.1:3306:[[remote ip]]:3306 user@server -N I want to set up ssh tunneling so that I can access a remote mysql server. First of all, I'm told bind: Address already in use. This is only after I've tried the command before. How do I manually close a port forwarding session? Second, when I change the command to be ssh -L 127.0.0.1:3310:[[remote ip]]:3306 user@server -N (I changed the local port to listen on). I'm told channel 1: open failed: connect failed: Connection refused when I try to connect to the MySQL server via MySQL workbench or sequel pro. To connect through MySQL workbench I use the following settings: host: 127.0.0.1 port: 3310 (if 3306 is in use) username: mysql username password: mysql password database: I don't put anything in

  Read the article

• Purple line on left side of screen when I use graphics card's hdmi port

  - by fab

  My graphics card is a nVidia GeForce GTX 660 2GB. When I plug HDMI into mobo it works fine. When I plug it into the graphics card (with 2nd monitor too) it shows a purple vertical line on the left side. It adds 2 pixels to the width and I can't adjust it with my monitor. It doesn't come up when I print screen. I tried changing the driver to the binary one (at the top) but that made it not show up at all. What do I do? Are some graphics cards just not compatible?

  Read the article

• create print server port via command line error Win 8

  - by Benjamin Jones

  I need to create a Print Server Port via commandline in Windows 8 Per Google search I should be using prnport.vbs script to do so: cscript c:\Windows\System32\Printing_Admin_Scripts\en-US\prnport.vbs -a -s \\192.168.113.253 -r Xerox_192.168.113.253 However I get this error: ** Unable to connect to WMI service Error 0x800706BA The RPC Server is unavailable. ** I looked at local services and both RPC and WMI services are started . Also I made sure add remote admin rule to Windows Firewall via command line without success!: netsh advfirewall firewall set rule group="windows management instrumentation (wmi)" new enable=yes netsh advfirewall firewall set rule group="remote administration" new enable=yes NOTE: If I use the GUI to create the print server port then add the printer via command line: rundll32 printui.dll,PrintUIEntry /if /b "Xerox WorkCenter 7535" /F C:\Windows\Inf\WC7545-7556_PCL6_x64_Driver\x2DNORX.inf /r "Xerox_192.168.113.253" /m "Xerox WorkCentre 7535 PCL6" THE PRINTER IS SUCCESSFULLY ADDED. So its NOT the printer it self! So how can I successfully add a print server port via command line? Thanks

  Read the article

< Previous Page | 30 31 32 33 34 35 36 37 38 39 40 41  | Next Page >