Search Results

Search found 20786 results on 832 pages for 'static variables'.

Page 34/832 | < Previous Page | 30 31 32 33 34 35 36 37 38 39 40 41  | Next Page >

• Cannot ping router with a static IP assigned?

  - by Uriah

  Alright. I am running Ubuntu LTS 12.04 and am trying to configure a local caching/master DNS server so I am using Bind9. First, here are some things via default DHCP: /etc/network/interfaces cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet dhcp # The primary network interface - STATIC #auto eth0 #iface eth0 inet static # address 192.168.2.113 # netmask 255.255.255.0 # network 192.168.2.0 # broadcast 192.168.2.255 # gateway 192.168.2.1 # dns-search uclemmer.net # dns-nameservers 192.168.2.113 8.8.8.8 /etc/resolv.conf cat /etc/resolv.conf # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN nameserver 192.168.2.1 search uclemmer.net ifconfig ifconfig eth0 Link encap:Ethernet HWaddr 00:14:2a:82:d4:9e inet addr:192.168.2.103 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::214:2aff:fe82:d49e/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1067 errors:0 dropped:0 overruns:0 frame:0 TX packets:2504 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:153833 (153.8 KB) TX bytes:214129 (214.1 KB) Interrupt:23 Base address:0x8800 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:915 errors:0 dropped:0 overruns:0 frame:0 TX packets:915 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:71643 (71.6 KB) TX bytes:71643 (71.6 KB) ping ping -c 4 192.168.2.1 PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data. 64 bytes from 192.168.2.1: icmp_req=1 ttl=64 time=0.368 ms 64 bytes from 192.168.2.1: icmp_req=2 ttl=64 time=0.224 ms 64 bytes from 192.168.2.1: icmp_req=3 ttl=64 time=0.216 ms 64 bytes from 192.168.2.1: icmp_req=4 ttl=64 time=0.237 ms --- 192.168.2.1 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 2997ms rtt min/avg/max/mdev = 0.216/0.261/0.368/0.063 ms ping -c 4 google.com PING google.com (74.125.134.102) 56(84) bytes of data. 64 bytes from www.google-analytics.com (74.125.134.102): icmp_req=1 ttl=48 time=15.1 ms 64 bytes from www.google-analytics.com (74.125.134.102): icmp_req=2 ttl=48 time=11.4 ms 64 bytes from www.google-analytics.com (74.125.134.102): icmp_req=3 ttl=48 time=11.6 ms 64 bytes from www.google-analytics.com (74.125.134.102): icmp_req=4 ttl=48 time=11.5 ms --- google.com ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3003ms rtt min/avg/max/mdev = 11.488/12.465/15.118/1.537 ms ip route ip route default via 192.168.2.1 dev eth0 metric 100 192.168.2.0/24 dev eth0 proto kernel scope link src 192.168.2.103 As you can see, with DHCP everything seems to work fine. Now, here are things with static IP: /etc/network/interfaces cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface #auto eth0 #iface eth0 inet dhcp # The primary network interface - STATIC auto eth0 iface eth0 inet static address 192.168.2.113 netmask 255.255.255.0 network 192.168.2.0 broadcast 192.168.2.255 gateway 192.168.2.1 dns-search uclemmer.net dns-nameservers 192.168.2.1 8.8.8.8 I have tried dns-nameservers in various combos of *.2.1, *.2.113, and other reliable, public nameservers. /etc/resolv.conf cat /etc/resolv.conf # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN nameserver 192.168.2.1 nameserver 8.8.8.8 search uclemmer.net Obviously, when I change the nameservers in the /etc/network/interfaces file, the nameservers change here too. ifconfig ifconfig eth0 Link encap:Ethernet HWaddr 00:14:2a:82:d4:9e inet addr:192.168.2.113 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::214:2aff:fe82:d49e/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1707 errors:0 dropped:0 overruns:0 frame:0 TX packets:2906 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:226230 (226.2 KB) TX bytes:263497 (263.4 KB) Interrupt:23 Base address:0x8800 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:985 errors:0 dropped:0 overruns:0 frame:0 TX packets:985 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:78625 (78.6 KB) TX bytes:78625 (78.6 KB) ping ping -c 4 192.168.2.1 PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data. --- 192.168.2.1 ping statistics --- 4 packets transmitted, 0 received, 100% packet loss, time 3023ms ping -c 4 google.com ping: unknown host google.com Lastly, here are my bind zone files: /etc/bind/named.conf.options cat /etc/bind/named.conf.options options { directory "/etc/bind"; // // // query-source address * port 53; notify-source * port 53; transfer-source * port 53; // If there is a firewall between you and nameservers you want // to talk to, you may need to fix the firewall to allow multiple // ports to talk. See http://www.kb.cert.org/vuls/id/800113 // If your ISP provided one or more IP addresses for stable // nameservers, you probably want to use them as forwarders. // Uncomment the following block, and insert the addresses replacing // the all-0's placeholder. // forwarders { // 0.0.0.0; // }; forwarders { // My local 192.168.2.113; // Comcast 75.75.75.75; 75.75.76.76; // Google 8.8.8.8; 8.8.4.4; // DNSAdvantage 156.154.70.1; 156.154.71.1; // OpenDNS 208.67.222.222; 208.67.220.220; // Norton 198.153.192.1; 198.153.194.1; // Verizon 4.2.2.1; 4.2.2.2; 4.2.2.3; 4.2.2.4; 4.2.2.5; 4.2.2.6; // Scrubit 67.138.54.100; 207.255.209.66; }; // // // //allow-query { localhost; 192.168.2.0/24; }; //allow-transfer { localhost; 192.168.2.113; }; //also-notify { 192.168.2.113; }; //allow-recursion { localhost; 192.168.2.0/24; }; //======================================================================== // If BIND logs error messages about the root key being expired, // you will need to update your keys. See https://www.isc.org/bind-keys //======================================================================== dnssec-validation auto; auth-nxdomain no; # conform to RFC1035 listen-on-v6 { any; }; }; /etc/bind/named.conf.local cat /etc/bind/named.conf.local // // Do any local configuration here // // Consider adding the 1918 zones here, if they are not used in your // organization //include "/etc/bind/zones.rfc1918"; zone "example.com" { type master; file "/etc/bind/zones/db.example.com"; }; zone "2.168.192.in-addr.arpa" { type master; file "/etc/bind/zones/db.2.168.192.in-addr.arpa"; /etc/bind/zones/db.example.com cat /etc/bind/zones/db.example.com ; ; BIND data file for example.com interface ; $TTL 604800 @ IN SOA yossarian.example.com. root.example.com. ( 1343171970 ; Serial 604800 ; Refresh 86400 ; Retry 2419200 ; Expire 604800 ) ; Negative Cache TTL ; @ IN NS yossarian.example.com. @ IN A 192.168.2.113 @ IN AAAA ::1 @ IN MX 10 yossarian.example.com. ; yossarian IN A 192.168.2.113 router IN A 192.168.2.1 printer IN A 192.168.2.200 ; ns01 IN CNAME yossarian.example.com. www IN CNAME yossarian.example.com. ftp IN CNAME yossarian.example.com. ldap IN CNAME yossarian.example.com. mail IN CNAME yossarian.example.com. /etc/bind/zones/db.2.168.192.in-addr.arpa cat /etc/bind/zones/db.2.168.192.in-addr.arpa ; ; BIND reverse data file for 2.168.192.in-addr interface ; $TTL 604800 @ IN SOA yossarian.example.com. root.example.com. ( 1343171970 ; Serial 604800 ; Refresh 86400 ; Retry 2419200 ; Expire 604800 ) ; Negative Cache TTL ; @ IN NS yossarian.example.com. @ IN A 255.255.255.0 ; 113 IN PTR yossarian.example.com. 1 IN PTR router.example.com. 200 IN PTR printer.example.com. ip route ip route default via 192.168.2.1 dev eth0 metric 100 192.168.2.0/24 dev eth0 proto kernel scope link src 192.168.2.113 I can SSH in to the machine locally at *.2.113 or at whatever address is dynamically assigned when in DHCP "mode". *2.113 is in my router's range and I have ports open and forwarding to the server. Pinging is enabled on the router too. I briefly had a static configuration working but it died after the first reboot. Please let me know what other info you might need. I am beyond frustrated/baffled.

  Read the article

• What are the use cases for this static reflection code?

  - by Maslow

  This is Oliver Hanappi's static reflection code he posted on stackoverflow private static string GetMemberName(Expression expression) { switch (expression.NodeType) { case ExpressionType.MemberAccess: var memberExpression = (MemberExpression)expression; var supername = GetMemberName(memberExpression.Expression); if (String.IsNullOrEmpty(supername)) return memberExpression.Member.Name; return String.Concat(supername, '.', memberExpression.Member.Name); case ExpressionType.Call: var callExpression = (MethodCallExpression)expression; return callExpression.Method.Name; case ExpressionType.Convert: var unaryExpression = (UnaryExpression)expression; return GetMemberName(unaryExpression.Operand); case ExpressionType.Parameter: return String.Empty; default: throw new ArgumentException("The expression is not a member access or method call expression"); } } I have the public wrapper methods: public static string Name<T>(Expression<Action<T>> expression) { return GetMemberName(expression.Body); } public static string Name<T>(Expression<Func<T, object>> expression) { return GetMemberName(expression.Body); } then added my own method shortcuts public static string ClassMemberName<T>(this T sourceType,Expression<Func<T,object>> expression) { return GetMemberName(expression.Body); } public static string TMemberName<T>(this IEnumerable<T> sourceList, Expression<Func<T,object>> expression) { return GetMemberName(expression.Body); } What are examples of code that would necessitate or take advantage of the different branches in the GetMemberName(Expression expression) switch? what all is this code capable of making strongly typed?

  Read the article

• Light mask map and camera for static lights in XNA Platformer

  - by JiminyCricket

  Using the example for some basic light maps found here : http://blog.josack.com/2011/07/xna-2d-dynamic-lighting.html, I've managed to create a lightmap texture using individual lightmaps and display it over a 2D tiled world as in the Platformer example. I'm using the very basic 2D camera example as found here : http://www.david-amador.com/2009/10/xna-camera-2d-with-zoom-and-rotation/, and the problem is that the lightmap texture scrolls with the player sprite. This looks pretty good and would be excellent for lighting the player sprite as it moves. But, I also want to be able to place static lights (or some initial position for the lights) that do not move with the player or camera. When I turn off the camera or give it a static position, it works as a series of static lights so I believe it's probably caused by the camera transformation matrix following the player around. I'm using RenderTarget2Ds, one for the main game screen after all the backgrounds and tiles are rendered, and one for the "lightmap" which consists of a black background and a bunch of lighting textures which are merged with it using additive blending. For now, I'm doing all of this in PlatformerGame.cs where the camera transformation and position is set and the level.Draw() call is made. I can't figure out how to separate the drawing of the lightmap and the camera following the player. I was thinking it would be better to render the shadows and lighting directly in the drawing of the level itself, but I'm not sure how to do that either because this technique requires RenderTarget2Ds and calling SpriteBatch.Begin()/End().

  Read the article

• Is it possible to declare multiple static variable with same name in a single C file?

  - by Mohammed Khalid Kherani

  Hi Experts, Is it possible to declare multiple static variables of same name in a single C file with different scopes? I wrote a simple programme to check this and in gcc it got compiled and worked fine. code: static int sVar = 44; void myPrint2() { printf("sVar = %d\n", sVar++); } void myPrint() { static int sVar =88; printf("sVar = %d\n", sVar++); } int main(void) { static int sVar = 55; int i = 0; for (i = 0; i < 5; i++) myPrint(); printf("sVar = %d\n", sVar); myPrint2(); return(0); } Now my question is since all "static" variable will reside in same section (.data) then how we can have multiple variable with same name in one section? I used objdump to check the different section and found that all Static variables (sVar) were in .data section but with different names 0804960c l O .data 00000004 sVar 08049610 l O .data 00000004 sVar.1785 08049614 l O .data 00000004 sVar.1792 Why compiler is changing the name of variables (since C doesnt support name mangling)? Thanks in advance.

  Read the article

• Are there any guarantees in JLS about order of execution static initialization blocks?

  - by Roman

  I wonder if it's reliable to use a construction like: private static final Map<String, String> engMessages; private static final Map<String, String> rusMessages; static { engMessages = new HashMap<String, String> () {{ put ("msgname", "value"); }}; rusMessages = new HashMap<String, String> () {{ put ("msgname", "????????"); }}; } private static Map<String, String> msgSource; static { msgSource = engMessages; } public static String msg (String msgName) { return msgSource.get (msgName); } Is there a possibility that I'll get NullPointerException because msgSource initialization block will be executed before the block which initializes engMessages? (about why don't I do msgSource initialization at the end of upper init. block: just the matter of taste; I'll do so if the described construction is unreliable)

  Read the article

• Are there any garanties in JLS about order of execution static initialization blocks?

  - by Roman

  I wonder if it's reliable to use a construction like: private static final Map<String, String> engMessages; private static final Map<String, String> rusMessages; static { engMessages = new HashMap<String, String> () {{ put ("msgname", "value"); }}; rusMessages = new HashMap<String, String> () {{ put ("msgname", "????????"); }}; } private static Map<String, String> msgSource; static { msgSource = engMessages; } public static String msg (String msgName) { return msgSource.get (msgName); } Is there a possibility that I'll get NullPointerException because msgSource initialization block will be executed before the block which initializes engMessages? (about why don't I do msgSource initialization at the end of upper init. block: just the matter of taste; I'll do so if the described construction is unreliable)

  Read the article

• How to make a static route when using two internet connections?

  - by webmasters

  I have asked a question here on how to choose which applications will use a 3G internet connection and which applications will use the LAN. User harrymc gave a very complete and interesting answer, pointing that this is possible using static routes for certain websites. Now, lets say I want to access google.com only through my 3G internet connection. How would that static root look like? google has the IP: 173.194.39.180 here is a print of my route table, the 3G Modem has the IP: 10.81.132.96 +-----------------------------------------------------------------------------+ ¦ IPv4 Route Table ¦ ¦ =========================================================================== ¦ ¦ Active Routes: ¦ ¦ Network Destination Netmask Gateway Interface Metric ¦ ¦ 0.0.0.0 0.0.0.0 192.168.2.1 192.168.2.102 20 ¦ ¦ 0.0.0.0 0.0.0.0 10.81.132.97 10.81.132.111 286 ¦ ¦ 10.81.132.96 255.255.255.224 On-link 10.81.132.111 286 ¦ ¦ 10.81.132.111 255.255.255.255 On-link 10.81.132.111 286 ¦ ¦ 10.81.132.127 255.255.255.255 On-link 10.81.132.111 286 ¦ ¦ 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 ¦ ¦ 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 ¦ ¦ 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 ¦ ¦ 192.168.2.0 255.255.255.0 On-link 192.168.2.102 276 ¦ ¦ 192.168.2.102 255.255.255.255 On-link 192.168.2.102 276 ¦ ¦ 192.168.2.255 255.255.255.255 On-link 192.168.2.102 276 ¦ ¦ 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 ¦ ¦ 224.0.0.0 240.0.0.0 On-link 192.168.2.102 276 ¦ ¦ 224.0.0.0 240.0.0.0 On-link 10.81.132.111 286 ¦ ¦ 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 ¦ ¦ 255.255.255.255 255.255.255.255 On-link 192.168.2.102 276 ¦ ¦ 255.255.255.255 255.255.255.255 On-link 10.81.132.111 286 ¦ +-----------------------------------------------------------------------------+

  Read the article

• Is it possible for a faulty processor to cause audio static/noise?

  - by Tom

  I have a Core 2 Extreme processor I received from a friend and have set up an XBMC box using it. However, I constantly get audio static whenever playing any music or videos. Here is a video of the sound: http://www.youtube.com/watch?v=SqKQkxYRVA4 I have tried replacing everything short of the case and the processor, including cables, audio interfaces, operating systems, ram, etc, leading me to think it might be either the case shorting out the motherboards I have tried or a faulty processor. Is it possible for a faulty processor to cause audio static/noise? Any feedback would be appreciated. Edit - Here's a list of things I have tried: Reinstalling OS Installing/upgrading/repairing PulseAudio/Alsa Installing alternate OSes, straight Ubuntu, Lubuntu, Xubuntu, Arch, Mint, Windows 7 Switching audio from the external card to internal Optical, audio out through HDMI, audio out through headphones Different ports on receiver (my main desktop sounds fine on the same sound system) Different optical cables Unplugging everything unnecessary from the motherboard (1 HD, 1 Stick of Ram, 1 Keyboard) Swapping out ram Swapping out the motherboard Replacing the Graphics Card (was replaced due to fan being noisy, not specifically for this problem) Different harddrives Swapping power supply Disabling onboard audio Switching Power Cable Plugging in through surge protector Plugging into different outlet on separate circuit

  Read the article

• Why cache static files with Varnish, why not pass

  - by Saif Bechan

  I have a system runnning nginx / php-fpm / varnish / wordpress and amazon s3. Now I have looked at a lot of configuration files while setting up the system, and in all of them I found something like this: /* If the request is for pictures, javascript, css, etc */ if (req.url ~ "\.(jpg|jpeg|png|gif|css|js)$") { /* Remove the cookie and make the request static */ unset req.http.cookie; return (lookup); } I do not understand why this is done. Most of the examples also run NginX as a webserver. Now the question is, why would you use the varnish cache to cache these static files. It makes much more sense to me to only cache the dynamic files so that php-fpm / mysql don't get hit that much. Am I correct or am I missing something here? UPDATE I want to add some info to the question based on the answer given. If you have a dynamic website, where the content actually changes a lot, chaching does not make sense. But if you use WordPress for a static website for example, this can be cached for long periods of time. That said, more important to me is static conent. I have found a link with some test and benchmarks on different cache apps and webserver apps. http://nbonvin.wordpress.com/2011/03/14/apache-vs-nginx-vs-varnish-vs-gwan/ NginX is actually faster in getting your static content, so it makes more sense to just let it pass. NginX works great with static files. -- Apart from that, most of the time static content is not even in the webserver itself. Most of the time this content is stores on a CDN somewhere, maybe AWS S3, something like that. I think the varnish cache is the last place where you want to have you static content stored.

  Read the article

• Why my object sees variables which were not given to it in the constructor?

  - by Roman

  I have the following code. Which is "correct" and which I do not understand: private static void updateGUI(final int i, final JLabel label) { SwingUtilities.invokeLater( new Runnable() { public void run() { label.setText("You have " + i + " seconds."); } } ); } I create a new instance of the Runnable class and then in the run method of this instance I use variables label and i. It works, but I do not understand why it work. Why the considered object sees values of these variables. According to my understanding the code should look like that (and its wrong): private static void updateGUI(final int i, final JLabel label) { SwingUtilities.invokeLater(new Runnable(i,label) { public Runnable(int i, JLabel label) { this.i = i; this.label = label; } public void run() { label.setText("You have " + i + " seconds."); } }); } So, I would give the i and label variables to the constructor so the object can access them... By the way, in the updateGUI I use final before the i and label. I think I used final because compiler wanted that. But I do not understand why.

  Read the article

• A dacpac limitation – Deploy dacpac wizard does not understand SqlCmd variables

  - by jamiet

  Since the release of SQL Server 2012 I have become a big fan of using dacpacs for deploying SQL Server databases (for reasons that I will explain some other day) and I chose to use a dacpac to distribute my recently announced utility sp_ssiscatalog (read: Introducing sp_ssiscatalog (v1.0.0.0)). Unfortunately if you read that blog post you may have taken note of the following: Ordinarily a dacpac can be deployed to a SQL Server from SSMS using the Deploy Dacpac wizard however in this case there is a limitation. Due to sp_ssiscatalog referring to objects in the SSIS Catalog (which it has to do of course) the dacpac contains a SqlCmd variable to store the name of the database that underpins the SSIS Catalog; unfortunately the Deploy Dacpac wizard in SSMS has a rather gaping limitation in that it cannot deploy dacpacs containing SqlCmd variables. I think it is worth calling out this limitation separately in this blog post because its a limitation that all dacpac users need to be aware of. If you try and deploy the dacpac containing sp_ssiscatalog using the wizard in SSMS then this is what you will see: TITLE: Microsoft SQL Server Management Studio ------------------------------ Could not deploy package. (Microsoft.SqlServer.Dac) ------------------------------ ADDITIONAL INFORMATION: Missing values for the following SqlCmd variables:SSISDB. (Microsoft.Data.Tools.Schema.Sql) ------------------------------ BUTTONS: OK ------------------------------ The message is quite correct. The SSDT DB project that I used to build this dacpac *does* have a SqlCmd variable in it called SSISDB: Quite simply, the Dac Deployment wizard in SSMS is not capable of deploying such dacpacs. Your only option for deploying such dacpacs is to use the command-line tool sqlpackage.exe. Generally I use sqlpackage.exe anyway (which is why it has taken me months to encounter the aforementioned problem) and have found it preferable to using a GUI-based wizard. Your mileage may vary. @Jamiet

  Read the article

• A dacpac limitation – Deploy dacpac wizard does not understand SqlCmd variables

  - by jamiet

  Since the release of SQL Server 2012 I have become a big fan of using dacpacs for deploying SQL Server databases (for reasons that I will explain some other day) and I chose to use a dacpac to distribute my recently announced utility sp_ssiscatalog (read: Introducing sp_ssiscatalog (v1.0.0.0)). Unfortunately if you read that blog post you may have taken note of the following: Ordinarily a dacpac can be deployed to a SQL Server from SSMS using the Deploy Dacpac wizard however in this case there is a limitation. Due to sp_ssiscatalog referring to objects in the SSIS Catalog (which it has to do of course) the dacpac contains a SqlCmd variable to store the name of the database that underpins the SSIS Catalog; unfortunately the Deploy Dacpac wizard in SSMS has a rather gaping limitation in that it cannot deploy dacpacs containing SqlCmd variables. I think it is worth calling out this limitation separately in this blog post because its a limitation that all dacpac users need to be aware of. If you try and deploy the dacpac containing sp_ssiscatalog using the wizard in SSMS then this is what you will see: TITLE: Microsoft SQL Server Management Studio ------------------------------ Could not deploy package. (Microsoft.SqlServer.Dac) ------------------------------ ADDITIONAL INFORMATION: Missing values for the following SqlCmd variables:SSISDB. (Microsoft.Data.Tools.Schema.Sql) ------------------------------ BUTTONS: OK ------------------------------ The message is quite correct. The SSDT DB project that I used to build this dacpac *does* have a SqlCmd variable in it called SSISDB: Quite simply, the Dac Deployment wizard in SSMS is not capable of deploying such dacpacs. Your only option for deploying such dacpacs is to use the command-line tool sqlpackage.exe. Generally I use sqlpackage.exe anyway (which is why it has taken me months to encounter the aforementioned problem) and have found it preferable to using a GUI-based wizard. Your mileage may vary. @Jamiet

  Read the article

• Unexpected SQL Server 2008 Performance Tip: Avoid local variables in WHERE clause

  - by Jim Duffy

  Sometimes an application needs to have every last drop of performance it can get, others not so much. We’re in the process of converting some legacy Visual FoxPro data into SQL Server 2008 for an application and ran into a situation that required some performance tweaking. I figured the Making Microsoft SQL Server 2008 Fly session that Yavor Angelov (SQL Server Program Manager – Query Processing) presented at PDC 2009 last November would be a good place to start. I was right. One tip among the list of incredibly useful tips Yavor presented was “local variables are bad news for the Query Optimizer and they cause the Query Optimizer to guess”. What that means is you should be avoiding code like this in your stored procs even though it seems such an intuitively good idea. DECLARE @StartDate datetime SET @StartDate = '20091125' SELECT * FROM Orders WHERE OrderDate = @StartDate Instead you should be referencing the value directly in the WHERE clause so the Query Optimizer can create a better execution plan. SELECT * FROM Orders WHERE OrderDate = '20091125' My first thought about this one was we reference variables in the form of passed in parameters in WHERE clauses in many of our stored procs. Not to worry though because parameters ARE available to the Query Optimizer as it compiles the execution plan. I highly recommend checking out Yavor’s session for additional tips to help you squeeze every last drop of performance out of your queries. Have a day. :-|

  Read the article

• Generalise variable usage inside code

  - by Shirish11

  I would like to know if it is a good practice to generalize variables (use single variable to store all the values). Consider simple example Strings querycre,queryins,queryup,querydel; querycre = 'Create table XYZ ...'; execute querycre ; queryins = 'Insert into XYZ ...'; execute queryins ; queryup = 'Update XYZ set ...'; execute queryup; querydel = 'Delete from XYZ ...'; execute querydel ; and Strings query; query= 'Create table XYZ ... '; execute query ; query= 'Insert into XYZ ...'; execute query ; query= 'Update XYZ set ...'; execute query ; query= 'Delete from XYZ ...'; execute query ; In first case I use 4 strings each storing data to perform the actions mentioned in their suffixes. In second case just 1 variable to store all kinds the data. Having different variables makes it easier for someone else to read and understand it better. But having too many of them makes it difficult to manage. Also does having too many variables hamper my performance?

  Read the article

• List repositories from multiple projects in Trac using mod_python

  - by Steffen Eriksen

  Currently working on a customized webpage that shows the available projects I have in Trac (1.0.1). I am using mod_python to connect the trac interface. I found a standard page for this, but it didn't show listing of repositories. The page showed some variables to link to the different projects, but I can't find variables to the different repositories inside the projects. I have set up the webpage from reading this: http://trac.edgewall.org/wiki/TracInterfaceCustomization (under Site Appearance) Short summary; editing ../conf.d/trac.conf: PythonOption TracEnvParentDir /parent/dir/of/projects PythonOption TracEnvIndexTemplate /path/to/template And making a template file I can edit at /path/to/template: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"> <html xmlns="http://www.w3.org/1999/xhtml" xmlns:py="http://genshi.edgewall.org/" xmlns:xi="http://www.w3.org/2001/XInclude"> <head> <title>Available Projects</title> </head> <body> <h1>Available Projects</h1> <ul> <dl> <li py:for="project in projects" py:choose=""> <a py:when="project.href" href="$project.href" title="$project.description">$project.name</a> ## <dd> WANT TO ADD CODE HERE! </dd> <py:otherwise> <small>$project.name: <em>Error</em> <br /> ($project.description)</small> </py:otherwise> </li> </dl> </ul> </body> </html> So... The code I want to add is something like: <dd py:for="repos in project.repository" py:choose=""> <a py:when="repos.href" href="$repos.href"> $repos.name</a> </dd> I can't figure out where to add the variables, or if there already exists some variables I can use. After searching through the files it seemed like main.py had something to do with the variables (/usr/local/Trac-1.0.1/trac/web/main.py), but at first look it didn't seem easy to just add more variables. Is there a simple way to find the rest of the variables ? And how hard is it to add more variables? Will it perhaps be easier to do this an alternative way ? All I need is to link to the repositories dynamically

  Read the article

• Using the Static Code Analysis feature of Visual Studio (Premium/Ultimate) to find memory leakage problems

  - by terje

  Memory for managed code is handled by the garbage collector, but if you use any kind of unmanaged code, like native resources of any kind, open files, streams and window handles, your application may leak memory if these are not properly handled.  To handle such resources the classes that own these in your application should implement the IDisposable interface, and preferably implement it according to the pattern described for that interface. When you suspect a memory leak, the immediate impulse would be to start up a memory profiler and start digging into that.   However, before you follow that impulse, do a Static Code Analysis run with a ruleset tuned to finding possible memory leaks in your code.  If you get any warnings from this, fix them before you go on with the profiling. How to use a ruleset In Visual Studio 2010 (Premium and Ultimate editions) you can define your own rulesets containing a list of Static Code Analysis checks.   I have defined the memory checks as shown in the lists below as ruleset files, which can be downloaded – see bottom of this post.  When you get them, you can easily attach them to every project in your solution using the Solution Properties dialog. Right click the solution, and choose Properties at the bottom, or use the Analyze menu and choose “Configure Code Analysis for Solution”: In this dialog you can now choose the Memorycheck ruleset for every project you want to investigate.  Pressing Apply or Ok opens every project file and changes the projects code analysis ruleset to the one we have specified here. How to define your own ruleset  (skip this if you just download my predefined rulesets) If you want to define the ruleset yourself, open the properties on any project, choose Code Analysis tab near the bottom, choose any ruleset in the drop box and press Open Clear out all the rules by selecting “Source Rule Sets” in the Group By box, and unselect the box Change the Group By box to ID, and select the checks you want to include from the lists below. Note that you can change the action for each check to either warning, error or none, none being the same as unchecking the check.   Now go to the properties window and set a new name and description for your ruleset. Then save (File/Save as) the ruleset using the new name as its name, and use it for your projects as detailed above. It can also be wise to add the ruleset to your solution as a solution item. That way it’s there if you want to enable Code Analysis in some of your TFS builds.   Running the code analysis In Visual Studio 2010 you can either do your code analysis project by project using the context menu in the solution explorer and choose “Run Code Analysis”, you can define a new solution configuration, call it for example Debug (Code Analysis), in for each project here enable the Enable Code Analysis on Build   In Visual Studio Dev-11 it is all much simpler, just go to the Solution root in the Solution explorer, right click and choose “Run code analysis on solution”.     The ruleset checks The following list is the essential and critical memory checks.  CheckID Message Can be ignored ? Link to description with fix suggestions CA1001 Types that own disposable fields should be disposable No  http://msdn.microsoft.com/en-us/library/ms182172.aspx CA1049 Types that own native resources should be disposable Only if the pointers assumed to point to unmanaged resources point to something else  http://msdn.microsoft.com/en-us/library/ms182173.aspx CA1063 Implement IDisposable correctly No  http://msdn.microsoft.com/en-us/library/ms244737.aspx CA2000 Dispose objects before losing scope No  http://msdn.microsoft.com/en-us/library/ms182289.aspx CA2115 1 Call GC.KeepAlive when using native resources See description  http://msdn.microsoft.com/en-us/library/ms182300.aspx CA2213 Disposable fields should be disposed If you are not responsible for release, of if Dispose occurs at deeper level  http://msdn.microsoft.com/en-us/library/ms182328.aspx CA2215 Dispose methods should call base class dispose Only if call to base happens at deeper calling level  http://msdn.microsoft.com/en-us/library/ms182330.aspx CA2216 Disposable types should declare a finalizer Only if type does not implement IDisposable for the purpose of releasing unmanaged resources  http://msdn.microsoft.com/en-us/library/ms182329.aspx CA2220 Finalizers should call base class finalizers No  http://msdn.microsoft.com/en-us/library/ms182341.aspx Notes: 1) Does not result in memory leak, but may cause the application to crash   The list below is a set of optional checks that may be enabled for your ruleset, because the issues these points too often happen as a result of attempting to fix up the warnings from the first set.   ID Message Type of fault Can be ignored ? Link to description with fix suggestions CA1060 Move P/invokes to NativeMethods class Security No http://msdn.microsoft.com/en-us/library/ms182161.aspx CA1816 Call GC.SuppressFinalize correctly Performance Sometimes, see description http://msdn.microsoft.com/en-us/library/ms182269.aspx CA1821 Remove empty finalizers Performance No http://msdn.microsoft.com/en-us/library/bb264476.aspx CA2004 Remove calls to GC.KeepAlive Performance and maintainability Only if not technically correct to convert to SafeHandle http://msdn.microsoft.com/en-us/library/ms182293.aspx CA2006 Use SafeHandle to encapsulate native resources Security No http://msdn.microsoft.com/en-us/library/ms182294.aspx CA2202 Do not dispose of objects multiple times Exception (System.ObjectDisposedException) No http://msdn.microsoft.com/en-us/library/ms182334.aspx CA2205 Use managed equivalents of Win32 API Maintainability and complexity Only if the replace doesn’t provide needed functionality http://msdn.microsoft.com/en-us/library/ms182365.aspx CA2221 Finalizers should be protected Incorrect implementation, only possible in MSIL coding No http://msdn.microsoft.com/en-us/library/ms182340.aspx   Downloadable ruleset definitions I have defined three rulesets, one called Inmeta.Memorycheck with the rules in the first list above, and Inmeta.Memorycheck.Optionals containing the rules in the second list, and the last one called Inmeta.Memorycheck.All containing the sum of the two first ones.  All three rulesets can be found in the  zip archive  “Inmeta.Memorycheck” downloadable from here.   Links to some other resources relevant to Static Code Analysis MSDN Magazine Article by Mickey Gousset on Static Code Analysis in VS2010 MSDN :  Analyzing Managed Code Quality by Using Code Analysis, root of the documentation for this Preventing generated code from being analyzed using attributes Online training course on Using Code Analysis with VS2010 Blogpost by Tatham Oddie on custom code analysis rules How to write custom rules, from Microsoft Code Analysis Team Blog Microsoft Code Analysis Team Blog

  Read the article

• Ubuntu 12.04: apt-get "failed to fetch"; apt is trying to fetch via old static IP

  - by gabe

  Sample error: W: Failed to fetch http://security.ubuntu.com/ubuntu/dists/precise-security/universe/i18n/Translation-en Unable to connect to 192.168.1.70:8118: Now this was working just fine until I changed the IP this morning. I have the server set to a static IP of 10.0.1.70 and for years it has been 192.168.1.70 - the IP apt-get is trying to use right now. I use privoxy and tor thus the 8118 port. Like I said it all worked until I changed the static IP from 192.168.1.70 to 10.0.1.70. I was forced to do so because of router issues. (Long and involved story, I didn't really want to change the IP because I know something like this would happen.) The setup for TOR/Privoxy requires that has you point Privoxy at TOR via 127.0.0.1:9050. Then point curl, etc to Privoxy via $HOME/.bashrc. Typically you would set the listen to IP for Privoxy to 127.0.0.1 but if you want it accessible to the rest of the LAN you set the IP to the server's LAN IP. Which I did a long time ago and was working fine until this morning. I have changed all instances of 192.168.1.70 to 10.0.1.70 in both /etc/privoxy/config and $HOME/.bashrc. What makes this really strange for me is that curl is working fine. I curl icanhazip.com and voila I get a new IP every 10 minutes or so. I curl CNN.com and I get the short but sweet permanently moved to www.cnn.com message I expect. Firefox works fine. Ping works fine. And I've tested all of this via Remote Desktop over my LAN. So the connection appears to be fine for everything except apt. I've also rebooted hoping that would clear 192.168.1.70 from apt. So the connection to the internet and DNS aren't an issue for these programs. And they are, as far as I can tell, using Privoxy/TOR just fine. The real irony here is that I've tried to open up Privoxy to go to Ubuntu's servers directly without going through TOR to speed up the downloads from Ubuntu (did this months ago). So somewhere that I have not been able to find, apt has stored the IP 192.168.1.70. And 192.168.1.70 is no longer valid. Thanks for the help

  Read the article

• Static GitHub powered blog engine

  - by Daniel Cazzulino

  Blog engines were the new &quot;cool thing to write&quot; after the fever of writing a new DI framework was over. It was kinda like the new &quot;hello world++&quot; example. Almost every single engine uses a database of some sort to keep posts and comments. Almost every one is not leveraging the web as a consequence ;) I was intrigued by the possibilities that a flexible and general-purpose hosting solution like Github could offer for a static blog engine: basically keeping plain markdown/HTML/razor/WLW/whatever files that through a publish/build time process generate static files that pass for a &quot;blog engine&quot;. GitHub even supports custom domain names, so why not? Such an &quot;engine&quot; would have a number of benefits: Plain CSS styling Arbitrary JavaScript Leverage the web infrastructure (caching, CDNs, etc.) ...Read full article

  Read the article

• Static Class Values Are Valid Even Without a Main Method

  This example shows how a static block can work even without a main method.

  Read the article

• Static Class Values Are Valid Even Without a Main Method

  This example shows how a static block can work even without a main method.

  Read the article

• iOS: Versioned static frameworks vs Git Submodules and included code

  - by drekka

  For the last couple of years I've been building static frameworks of common APIs for my iOS projects. I can build a universal binary containing all the architectures (i386, armv6, armv7) and wrap it up in a .framework directory structure. I then stored this in a directory based on the version of the framework. For example ..../myAPI/v0.1.0/myAPI.framework Once I have this framework I can then easily add it to a project and if I want to advance the version, merely change the framework search paths to the later version. This works, but the approach is very similar to what I would use in the Java world. Recently I've been reading about using Git submodules and static framework sub projects in XCode 4. Im wondering if my currently approach is something that I should consider retiring and what the pros/cons are of the new approach. I'm weary of just including code because I've already had issues in a work project which had (effectively) multiple versions of a third party API. Any opinions?

  Read the article

• Yet Another Static Blog Generator

  - by prabhpreet

  In the spirit of hobbyist adventures, I made a static blog generator in C# with the help of MarkdownSharp (from the StackOverflow Guys, I think). Inspired from static blog generators like Jekyll, it does things Jekyll can’t do (aren’t built in)- it has a GUI and can generate feeds. Of course, it’s Windows Only and it’s somewhat limited too. But it works. If someone wants to port it to Mac and Linux, code is available on the site since it’s open source. Enjoy! Link

  Read the article

• tomcat serving static content with directory listings

  - by milan

  I have tomcat 7 configured to serve static contents from a directory: <Host appBase="webapps" name="localhost"> ... <Context docBase="/var/projectA/static" path="/projectA/" /> </Host> This is available at localhost:8080/projectA/. Is it possible to somehow enable directory listings for this context? I know it's possible to do this with apache in front of tomcat, but that's not what I'm looking for. p.s. there's no 'tomcat' tag and my rep doesn't allow me to create tags...

  Read the article

• Static IP breaks Network connection

  - by Pasquale Tedesco

  I am somewhat new to Linux. I am setting up a Web server and installed Ubuntu server 14.04 on an vSphere ESXi 5.5 host. I am connecting perfectly fine to the internet when using DHCP but when I apply my Static settings I loose the ability to connect to websites. Whats weird is I can Ping google.com but if I try wget gooogl.com it hangs at connecting to google.com (google.com):173.194.43.32:80 and I get "failed: connection refused" But if I am set to DHCP the connection resolves perfectly. Thanks # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 #iface eth0 inet dhcp iface eth0 inet static address 10.1.2.25 gateway 10.1.2.2 netmask 255.255.255.0 search tsig.com dns-nameservers 10.1.2.13 10.1.2.30

  Read the article

• Change from static HTML file to meta tag for Google Webmaster verification

  - by Wilfred Springer

  I started verifying the server by putting a couple of static HTMLs in place. Then I noticed that Google wants you to keep these files in place. I didn't want to keep the static HTMLs in, so I want to switch to an alternative verification mechanism, and include the meta tags on the home page. Unfortunately, once your site is verified, you never seem to be able to change to an alternative way of verification. I tried removing the HTML pages. No luck whatsoever. Google still considers the site to be 'verified'. Does anybody know how to undo this? All I want to do is switch to the meta tag based method of site ownership verification.

  Read the article

< Previous Page | 30 31 32 33 34 35 36 37 38 39 40 41  | Next Page >