Search Results

Search found 36498 results on 1460 pages for 'linux usb drive'.

Page 340/1460 | < Previous Page | 336 337 338 339 340 341 342 343 344 345 346 347  | Next Page >

• OSSEC HIDS Notification "Unknown problem somewhere in the system." (seems like hdd issue)

  - by John

  from what i understand somethings is wrong with hdd i am trying to find some commands in order to run some tests to check if hard disk is OK I will post a full list of logs after REBOOT of system: "Unknown problem somewhere in the system." kernel: ata2.00: failed command: READ FPDMA QUEUED kernel: res 51/40:c8:38:5c:16/00:00:00:00:00/40 Emask 0x409 (media error) <F> kernel: ata2.00: error: { UNC } kernel: ata2.00: failed command: READ FPDMA QUEUED kernel: res 51/40:78:88:5c:16/00:00:00:00:00/40 Emask 0x409 (media error) <F> kernel: sd 1:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] kernel: sd 1:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed kernel: md/raid1:md1: read error corrected (8 sectors at 1461400 on sda1) kernel: sd 1:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed kernel: sd 1:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed kernel: md/raid1:md1: read error corrected (8 sectors at 1461672 on sda1) Also some of this logs are duplicate or even more. Thanks.

  Read the article

• How can I prevent people from looking at a listing of files in parent directory if I haven't uploaded index.html? [closed]

  - by LedZeppelin

  Possible Duplicate: How to restrict the download of all files in a folder? I haven't uploaded index.html or index.php to my root directory. How can I prevent people from looking at a listing of files in parent directory? http://oi56.tinypic.com/sc739e.jpg Also, is it possible for people to obtain a list of all the files in the root directory once I upload index.html? I'm currently using .htaccess and htusers to prompt someone to enter a username and password when they try to access any file in the root directory. This may sound like a weird request but would it be possible to have them come to the site (without an index.html) and just have them not see the files? All it would say on the page would be the following: Index of/ Apache Server at mysite.com Port 80

  Read the article

• Good message board for a website (e.g. phpBB)

  - by unixman83

  Hi, What are the best (and most widely used) message board softwares, and the pros and cons of each. e.g. Security Vulnerabilities, Performance on a cheap server, comes pre-packaged. I am looking for the best message board software for my website. A VPS can run almost any software, so the sky is the limit! Free, doesn't require unreasonable number of hyperlinks to their website Security focused / Widely Used, vulnerabilities are found and fixed quick Easy to keep up-to-date, i.e. prepackaged / auto-update in some way Moderator features [like pinning / message preamble], account management Themeable, customize appearance a bit

  Read the article

• What are some methods for pulling information and interacting with flash games?

  - by Xploit

  In general, how should I approach interacting with a flash game pragmatically? The flash game is online and I would like to be able to pull information from the game, make computations, and send the appropriate keystrokes back to the flash game? I'm having difficult deciding how to begin. Any specific libraries or languages that you feel would be best for accomplishing this task? I would like it to be as fast as possible. Are there ways of doing this without taking screen shots and simulating keyboard presses?

  Read the article

• The "World's Fastest Server" Tracking (Application Challenge Submission)

  Using PHP-SOAP to access the world's fastest server web service and plot each trip using the Google maps API

  Read the article

• why does my lubuntu recognizes only lubuntu instalation cds?

  - by Hardi

  I installed lubuntu from alternate cd a month ago. Now when I needed to read some cd's, the cd try won't open. It can be opened before ubuntu boots up. It can be opened after entering sudo eject -i off from console. But it won't mount any other cd-roms, than just the lubuntu live-cd and lubuntu alternate instal cd, where it was installed from. "mount: no medium found on /dev/sr0" as output, when try to mount anything else. Problem can't be in corrupted sd's, because othe computer, did recognize them well.

  Read the article

• Upgrade to Xubuntu 13.10 - Saucy Salamander

  As a common 'fashion' it is possible to upgrade an existing installation of Ubuntu or one of its derivates every six months. Of course, you might opt-in for the adventure and directly keep your system always on the latest version (including alphas and betas), or you might like to play safe and stay on the long-term support (LTS) versions which are updated every two years only. As for me, I'd like to jump from release to release on my main desktop machine. And since 17th October Saucy Salamander or also known as Ubuntu 13.10 has been released for general use. The following paragraphs document the steps I went in order to upgrade my system to the recent version. Don't worry about the fact that I'm actually using Xubuntu. It's mainly a flavoured version of Ubuntu running Xfce 4.10 as default X Window manager. Well, I have Gnome and LXDE on the same system... just out of couriosity. Preparing the system Before you think about upgrading you have to ensure that your current system is running on the latest packages. This can be done easily via a terminal like so: $ sudo apt-get update && sudo apt-get -y dist-upgrade --fix-missing Next, we are going to initiate the upgrade itself: $ sudo update-manager As a result the graphical Software Updater should inform you that a newer version of Ubuntu is available for installation. Ubuntu's Software Updater informs you whether an upgrade is available Running the upgrade After clicking 'Upgrade...' you will be presented with information about the new version. Details about Ubuntu 13.10 (Saucy Salamander) Simply continue with the procedure and your system will be analysed for the next steps. Analysing the existing system and preparing the actual upgrade to 13.10 Next, we are at the point of no return. Last confirmation dialog before having a coffee break while your machine is occupied to download the necessary packages. Not the best bandwidth at hand after all... yours might be faster. Are you really sure that you want to start the upgrade? Let's go and have fun! Anyway, bye bye Raring Ringtail and Welcome Saucy Salamander! In case that you added any additional repositories like Medibuntu or PPAs you will be informed that they are going to be disabled during the upgrade and they might require some manual intervention after completion. Ubuntu is playing safe and third party repositories are disabled during the upgrade Well, depending on your internet bandwidth this might take something between a couple of minutes and some hours to download all the packages and then trigger the actual installation process. In my case I left my PC unattended during the night. Time to reboot Finally, it's time to restart your system and see what's going to happen... In my case absolutely nothing unexpected. The system booted the new kernel 3.11.0 as usual and I was greeted by a new login screen. Honestly, 'same' system as before - which is good and I love that fact of consistency - and I can continue to work productively. And also Software Updater confirms that we just had a painless upgrade: System is running Ubuntu 13.10 - Saucy Salamander - and up to date See you in six months again... ;-) Post-scriptum In case that you would to upgrade to the latest development version of Ubuntu, run the following command in a console: $ sudo update-manager -d And repeat all steps as described above.

  Read the article

• How to prevent firefox from updating

  - by Larry

  I have firefox 3.6.x in Mint Linux. For physical problems -- eyes and color, I want to keep this version and not do any updates ever to it. I don't know if it is a firefox or linux issue, but nothing seems to work. It should not be rocket scientist enabled. :P This is what I have tried: Update Manager and added to ignore package --firef0x* Fully removed all traces of firefox and reinstalled 3.6.28 In firefox, set the upgrade options (3) of them to unselected and saved. Scanned computer for firef* to insure all traces were removed, to include /usr/bin/firefox. Using Mint Linux 9, otherwise fully upgraded for packages. That's the main things I've done. My major issues is the later versions of that software are almost impossible for me to see.

  Read the article

• Where in the filesystem should I store shared data?

  - by misterben

  Where in the unix filesystem is the conventional location to save non-user specific data, for example data shared via nfs or ftp, or backups? I could obviously create and use any arbitrary folder (such as /home/shared, /data or /var/data), but I'm really wondering if there are any "best" or "common" practice guidelines. The Filesystem Hierarchy Standard doesn't specify a location for shared data. For backups, I tend to use /var/backups, but as several cronjobs write to it should it really be left for their use?

  Read the article

• Ping IP: connect: no such process

  - by Matthew

  I am trying to figure out this issue and am getting a weird error. We have two boxes which used to talk to one another on the network. Both are reachable via ssh from a separate network, which means they are able to talk to their default gateways just fine. When we try to ping from the linux machine to the linux machine, we get a bunch of timeouts. When we try to ping from the linux box back, we are getting connect: no such process. I can't seem to find much documentation on this error, though there consistently seem to be references to VPN stuff when googling for this error. The

  Read the article

• Directory access control with Apache: do I need to use a specific .htaccess?

  - by Mirror51

  I have an Apache webserver, and in the Apache configuration, I have Alias /backups "/backups" <Directory "/backups"> AllowOverride None Options Indexes Order allow,deny Allow from all </Directory> I can access files via http://127.0.0.1/backups. The problem is everyone can access that. I have a web interface, e.g. http://localhost/adminm that is protected with htaccess and password. Now I don't want separate .htaccess and .htpasswd for /backups, and I don't want a second password prompt when a user clicks on /backups in the web interface. Is there any way to use same .htaccess and .htpasswd for the backups directory?

  Read the article

• How to eliminate an old Ubuntu partition?

  - by GUI Junkie

  I installed Ubuntu 12.04 64-bit side by side with my previous 11.10 32-bit. As everything is working correctly, I want to eliminate the old partition. According to update-grub: Found Ubuntu 11.10 (11.10) on /dev/sda1 But according to GParted, /dev/sda1 is the boot partition! So, how can I discover which partition should be the boot partition for 12.04? Can I safely eliminate the /dev/sda1? Also, GParted gives /dev/sda5 as file system unknown, it's 2.93Gib and might be the swap partition (just guessing).

  Read the article

• Input/output error reading USB backup drive on CentOS 6.4

  - by Kev

  I'm suddenly seeing some strange behaviour on our USB backup drive that doesn't make sense to me: (2013-10-21 14:58:23 [root@newdc /]$ cd /mnt/backup/ (2013-10-21 14:59:03 [root@newdc backup]$ ls -la ls: reading directory .: Input/output error total 0 (2013-10-21 14:59:05 [root@newdc backup]$ df -h /mnt/backup Filesystem Size Used Avail Use% Mounted on /dev/sda1 917G 843G 28G 97% /mnt/backup How is it possible for the OS to know how much is in use, but I can't ls any of it as root? Or more to the point, what problem does this indicate? /var/log/messages said this: Oct 21 14:57:54 g5 kernel: EXT4-fs error (device sda1): ext4_journal_start_sb: Detected aborted journal Oct 21 14:57:54 g5 kernel: EXT4-fs (sda1): Remounting filesystem read-only But...read-only is something different than 'throw an io error'... After unmounting to try fsck on it, I had someone on-site look at it, and the drive was not spun up, and had a slow-flashing light, which I believe means it was in a power-suspend mode. So I had them unplug and replug the USB cable, and now (before remounting) it says: fsck from util-linux-ng 2.17.2 e2fsck 1.41.12 (17-May-2010) /dev/sda1: clean, 2805106/61046784 files, 181934167/244182016 blocks I then mount it and now ls works and df reports: Filesystem Size Used Avail Use% Mounted on /dev/sda1 917G 680G 191G 79% /mnt/backup What would cause it to go into such a state without being asked to? Why all the weird behaviour, and now it appears to not be corrupt?

  Read the article

• Can I have a single solid state drive and a RAID array on the same machine? [closed]

  - by jaminto

  Hi- To summarize, i'm looking to use a single solid state drive as my primary drive, and two conventional sata drives in a RAID 1 configuration for data. I am trying to install 64-bit Windows 7 onto this configuration. Is this possible? Here are the details: I built a desktop that has been running 64-bit Vista on two 500Gb in a RAID 1 array for a few years. I just purchased an Intel X25-M 80Gb Sata Solid-State Drive, and was planning on using this a my primary drive, and keeping the RAID 1 array as my data drive. I added the SSD drive and in the RAID setup, configured it as a RAID 0 array of only one disk. Then, I tried to do a clean install of windows 7 64-bit, but got stuck in the "Missing driver for CD/DVD drive" black hole of selecting driver files and Windows telling me that i don't have the appropriate driver for my hardware. The missing hardware is NOT a CD/DVD drive, since i'm installing off of my only CD/DVD drive. Plus at one point i was able to point it at a driver for my raid controller, and then my hard drives magically showed up as browsable sources for finding drivers for some other unnamed device that setup couldn't recognize. After a few hours of trying drivers (this was a very slow process) i decided to reboot and look at the BIOS settings. I'm using an ASUS M2A-VM motherboard which has an ATI SB600 RAID controller on board. I switched the "On board SATA Type" setting from "SATA" to "AHCI" thinking that since AHCI is an Intel thing, this would help. Unfortunately, this abandoned my RAID configuration, and my previously mirrored drives are showing up as separate drives when i boot into my current windows installation. Am i trying to do the impossible here? Should i just buy a separate SATA/RAID PCI card and plug the SSD into that? Any help would be greatly appreciated.

  Read the article

• How to configure installed Ruby and gems?

  - by NARKOZ

  My current gem env returns: RubyGems Environment: - RUBYGEMS VERSION: 1.3.6 - RUBY VERSION: 1.8.7 (2008-08-11 patchlevel 72) [x86_64-linux] - INSTALLATION DIRECTORY: /home/USERNAME/.gems - RUBYGEMS PREFIX: /home/narkoz - RUBY EXECUTABLE: /usr/bin/ruby1.8 - EXECUTABLE DIRECTORY: /home/USERNAME/.gems/bin - RUBYGEMS PLATFORMS: - ruby - x86_64-linux - GEM PATHS: - /home/USERNAME/.gems - /usr/lib/ruby/gems/1.8 - GEM CONFIGURATION: - :update_sources => true - :verbose => true - :benchmark => false - :backtrace => false - :bulk_threshold => 1000 - "gempath" => ["/home/USERNAME/.gems", "/usr/lib/ruby/gems/1.8"] - "gemhome" => "/home/USERNAME/.gems" - REMOTE SOURCES: - http://rubygems.org/ How can I change path /home/USERNAME/ to my own without uninstalling? OS: Debian Linux

  Read the article

• Moving from 1 Linux Partition to Many over USB Mount

  - by Mistiry

  We have devices which use Compact Flash for storage. They work OK, but we recently got industrial-grade CF cards to start using. One of the major problems we get is corruption on the flash card. As it is now, these flash cards run Debian with everything in a single partition. We want to have multiple partitions on the new industrial CF cards to help avoid some of the corruption problems. I booted up the device, and attached a USB CF reader. I then used fdisk to partition the CF card in the USB reader. How can I move the data to these partitions so that it works? I have a partition for each of these directories: /lib /var /root /boot /tmp /home /etc / swap space I imagine I can't just use rsync - do I need to attach a second CF reader with a copy of the CF card, so that it's not active and in-use - and then copy from the first reader to the second? How will the system know where to find its files? I know I'd have to change fstab, but that resides in /etc, which will be on a separate partition...how will it find the fstab file if it can't find /etc? And what about grub? I'm at a loss, perhaps its just because I'm under the weather, or I'm just missing a piece of logic here... Any help is greatly appreciated, this is somewhat urgent as our existing stock is nearing its end and we don't want to purchase anything but these industrial cards, but need to get it working with partitions.

  Read the article

• Information about a file or directory

  - by Tim

  In Linux, the information about a file or directory is stored in its inode. I was wondering what is the data structure for information about a file or directory in Windows 7? How to get the information about a file or directory in Linux and in Windows 7, in terminal and command line window? Is the owner of a file or directory always its creator? Will it be able to change? Is there a creation timestamp for a file in Linux and in Windows 7? How to get it? Thanks and regards!

  Read the article

• Where are my Hard Drives/Local Disks on the COMPUTER/System Folder in Ubuntu 12.04?

  - by Russel

  Being first to try Ubuntu. But Where are my Hard Drives/Local Disks on the COMPUTER/System Folder in Ubuntu 12.04?! Before installing 12.04 i had tried the Ubuntu 10.10 Version Live and it was perfect in showing my Local Disks. But it couldn't recognize my GTX 470 Graphics driver so i thought of trying the recent version i.e 12.04. Fortunately it solved the Graphics driver thing but now i am stuck with finding My Local Disks on 12.04. I am sorry if this is a silly question, but i know nothing of Ubuntu at the moment. Regards,

  Read the article

• Magic Quadrant for x86 Server Virtualization Infrastructure

  - by Cinzia Mascanzoni

  The 2012 Gartner MQ for x86 Server Virtualization has just published.  KEY TAKEAWAYS - Oracle is in the “Challengers” quadrant. - This is a significant “jump” above the x-axis (from the “Niche” quadrant) during previous years - The move into the “Challengers” quadrant was possible for 3 primary reasons - 1) strength of the Oracle VM 3.0 release - 2) integrated management capabilities - 3) solid customer momentum during past year - Gartner even specifically states that Oracle VM use is growing amongst VMware customers Read the full report here.

  Read the article

• Install failing new hard drives

  - by John

  I'm trying to install Ubuntu server 12.04 on my new hard drives but it seems to fail. Once past the option menu where is asked the partition to install the OS on, goes into a hold and no progress is shown afterwards. The hard disk I'm trying to install it on is: Western Digital WD20EARX The installation process hangs around 'installing core packages/installing the base system' . The CD comes through the test with being valid/ok. any help would be appreciated. Thanks in advance.

  Read the article

• Apache httpd + FreeTDS hangs until restarted

  - by Jordan Reiter

  Every so often requests to a Linux server (say, linux.example.org) where the web app (Django) pulls in data from a SQL Server database via FreeTDS will hang. Requests on other servers pointing to the database still work, as do requests on linux.example.org that use local MySQL databases. Only the server plus FreeTDS appear to be affected. Restarting httpd makes the database connections work correctly again. What could cause this problem? Using: Centos 5.9 freetds 0.91 Apache httpd 2.2.3 /etc/obdc.ini: [DSN] Description = SQL Server 2005 Driver = FreeTDS ;Database = dbname Servername = SERVERNAME ;TDS_Version = 8.0 /etc/freetds.conf: [SERVERNAME] driver = /usr/lib64/libtdsodbc.so host = db.example.org port = 1433 tds version = 8.0 client charset = UTF-8

  Read the article

• VMware Player 5.0 or VMware Workstation 9.0 after upgrade to Ubuntu 12.10

  The upgrade process Upgrading Ubuntu 12.04 to latest version 12.10 - aka Quantal Quetzal - is straight forward and you only need to follow the offical upgrade instructions. Short version on the console looks like this: sudo do-release-upgrade This will update the repository entries, and start the upgrade process. After some minutes or hours of download and installation, you have to reboot your system once to get the new kernel loaded. As time of writing, I'm on '3.5.0-17-generic'. And as with any modification of the kernel version, you have to compile the necessary kernel modules to get VMware Player or Workstation up and running. Usually, this happens the first time you try start your VMware software and that's it. Well, again not so this time. Getting the kernel patch Luckily, the community over VMware is very active and you can get a new kernel patch in the online forums here. Get the download and put in a folder have write permissions. Then you extract the archive on the console like so: tar -xjvf vmware9_kernel35_patch.tar.bz2 Then you change into the newly created folder: cd vmware9_kernel3.5_patch/ And you execute the available shell script as root (superuser) like so: sudo ./patch-modules_3.5.0.sh This will stop any running instances of VMware software, patches the source files and runs the compile process for your active environment. This might take some time depending on your machine, and once completed you can start VMware Player or Workstation as previously. In case that you are going to apply the patch again, the script will simply quit with the following output: /usr/lib/vmware/modules/source/.patched found. You have already patched your sources. Exiting You might remove the .patched file in case that you upgraded/changed your kernel and you need to apply the patch again. Disclaimer: The patch is "as-is" and the patcher is originally created by Artem S. Tashkinov, and later modified by An_tony. Please refer to the VMware forum in case of questions or problems. There are also patches available for older versions of VMware Player or Workstation.

  Read the article

• Will UUID be the same if a disk moved from one machine to another?

  - by Sunry

  While in Linux every disk got a UUID. I just wondering will the UUID be the same if I moved the same disk from one Linux box to another? Is it the same UUID in different machines with the same disk? Or for a disk the UUID will change with attached machine? Also a similar question: Will the UUID be the same after Linux distribution reinstalled in the same machine with the same disk? For example: First is CentOS 5, then reinstalled it to CentOS 6.

  Read the article

• What OS for Eee PC ?

  - by crivateos

  Hello. I've just bought new Eee PC 1005 (with Atom N450, 250GB and 2GB memory) without any pre-installed system. Now I'd like to install windows and linux distribution on in. What should I choose ? I am a programmer and web designer, so I need Java IDE , Python interpreters, and Photoshop (on windows). Will Win 7 Pro 32bit work ?Or should I choose Windows XP ? And what about linux distro ? Ubuntu, Eeebuntu, Ubuntu netbook edition ? btw is it true that linux's grub overrides mbr so that hardware system restore doesn't work ?

  Read the article

• Configuring partitions during install

  - by gen

  I'd like to install Ubuntu on my computer. I have a 500GB HDD with the following partitions: (at least what the Ubuntu installer shows): / - Windows 7 (loader) - 100GB - 400GB I'd like to install Ubuntu to the 100GB partition as on the 400GB I have Windows. But I have problems with the following: Whether I can set a swap particion without messing up my Windows. Which file system to set to the partition. Please tell me what and how to do it in the installer.

  Read the article

< Previous Page | 336 337 338 339 340 341 342 343 344 345 346 347  | Next Page >