Search Results

Search found 10215 results on 409 pages for 'ram usage'.

Page 340/409 | < Previous Page | 336 337 338 339 340 341 342 343 344 345 346 347  | Next Page >

• BizTalk 2009 - BizTalk Benchmark Wizard: Running a Test

  - by StuartBrierley

  The BizTalk Benchmark Wizard is a ultility that can be used to gain some validation of a BizTalk installation, giving a level of guidance on whether it is performing as might be expected.  It should be used after BizTalk Server has been installed and before any solutions are deployed to the environment.  This will ensure that you are getting consistent and clean results from the BizTalk Benchmark Wizard. The BizTalk Benchmark Wizard applies load to the BizTalk Server environment under a choice of specific scenarios. During these scenarios performance counter information is collected and assessed against statistics that are appropriate to the BizTalk Server environment. For details on installing the Benchmark Wizard see my previous post. The BizTalk Benchmarking Wizard provides two simple test scenarios, one for messaging and one for Orchestrations, which can be used to test your BizTalk implementation. Messaging Loadgen generates a new XML message and sends it over NetTCP A WCF-NetTCP Receive Location receives a the xml document from Loadgen. The PassThruReceive pipeline performs no processing and the message is published by the EPM to the MessageBox. The WCF One-Way Send Port, which is the only subscriber to the message, retrieves the message from the MessageBox The PassThruTransmit pipeline provides no additional processing The message is delivered to the back end WCF service by the WCF NetTCP adapter Orchestrations Loadgen generates a new XML message and sends it over NetTCP A WCF-NetTCP Receive Location receives a the xml document from Loadgen. The XMLReceive pipeline performs no processing and the message is published by the EPM to the MessageBox. The message is delivered to a simple Orchestration which consists of a receive location and a send port The WCF One-Way Send Port, which is the only subscriber to the Orchestration message, retrieves the message from the MessageBox The PassThruTransmit pipeline provides no additional processing The message is delivered to the back end WCF service by the WCF NetTCP adapter Below is a quick outline of how to run the BizTalk Benchmark Wizard on a single server, although it should be noted that this is not ideal as this server is then both generating and processing the load.  In order to separate this load out you should run the "Indigo" service on a seperate server. To start the BizTalk Benchmark Wizard click Start > All Programs > BizTalk Benchmark Wizard > BizTalk Benchmark Wizard. On this screen click next, you will then get the following pop up window. Check the server and database names and check the "check prerequsites" check-box before pressing ok.  The wizard will then check that the appropriate test scenarios are installed. You should then choose the test scenario that wish to run (messaging or orchestration) and the architecture that most closely matches your environment. You will then be asked to confirm the host server for each of the host instances. Next you will be presented with the prepare screen.  You will need to start the indigo service before pressing the Test Indigo Service Button. If you are running the indigo service on a separate server you can enter the server name here.  To start the indigo service click Start > All Programs > BizTalk Benchmark Wizard > Start Indigo Service.   While the test is running you will be presented with two speed dial type displays - one for the received messages per second and one for the processed messages per second. The green dial shows the current rate and the red dial shows the overall average rate.  Optionally you can view the CPU usage of the various servers involved in processing the tests. For my development environment I expected low results and this is what I got.  Although looking at the online high scores table and comparing to the quad core system listed, the results are perhaps not really that bad. At some time I may look at what improvements I can make to this score, but if you are interested in that now take a look at Benchmark your BizTalk Server (Part 3).

  Read the article

• concurrency::accelerator_view

  - by Daniel Moth

  Overview We saw previously that accelerator represents a target for our C++ AMP computation or memory allocation and that there is a notion of a default accelerator. We ended that post by introducing how one can obtain accelerator_view objects from an accelerator object through the accelerator class's default_view property and the create_view method. The accelerator_view objects can be thought of as handles to an accelerator. You can also construct an accelerator_view given another accelerator_view (through the copy constructor or the assignment operator overload). Speaking of operator overloading, you can also compare (for equality and inequality) two accelerator_view objects between them to determine if they refer to the same underlying accelerator. We'll see later that when we use concurrency::array objects, the allocation of data takes place on an accelerator at array construction time, so there is a constructor overload that accepts an accelerator_view object. We'll also see later that a new concurrency::parallel_for_each function overload can take an accelerator_view object, so it knows on what target to execute the computation (represented by a lambda that the parallel_for_each also accepts). Beyond normal usage, accelerator_view is a quality of service concept that offers isolation to multiple "consumers" of an accelerator. If in your code you are accessing the accelerator from multiple threads (or, in general, from different parts of your app), then you'll want to create separate accelerator_view objects for each thread. flush, wait, and queuing_mode When you create an accelerator_view via the create_view method of the accelerator, you pass in an option of immediate or deferred, which are the two members of the queuing_mode enum. At any point you can access this value from the queuing_mode property of the accelerator_view. When the queuing_mode value is immediate (which is the default), any commands sent to the device such as kernel invocations and data transfers (e.g. parallel_for_each and copy, as we'll see in future posts), will get submitted as soon as the runtime sees fit (that is the definition of immediate). When the value of queuing_mode is deferred, the commands will be batched up. To send all buffered commands to the device for execution, there is a non-blocking flush method that you can call. If you wish to block until all the commands have been sent, there is a wait method you can call. Deferring is a more advanced scenario aimed at performance gains when you are submitting many device commands and you want to avoid the tiny overhead of flushing/submitting each command separately. Querying information Just like accelerator, accelerator_view exposes the is_debug and version properties. In fact, you can always access the accelerator object from the accelerator property on the accelerator_view class to access the accelerator interface we looked at previously. Interop with D3D (aka DX) In a later post I'll show an example of an app that uses C++ AMP to compute data that is used in pixel shaders. In those scenarios, you can benefit by integrating C++ AMP into your graphics pipeline and one of the building blocks for that is being able to use the same device context from both the compute kernel and the other shaders. You can do that by going from accelerator_view to device context (and vice versa), through part of our interop API in amp.h: *get_device, create_accelerator_view. More on those in a later post. Comments about this post by Daniel Moth welcome at the original blog.

  Read the article

• RTL (Arabic and Hebrew) Support for Windows Phone 7

  - by Daniel Moth

  Problem and Background Currently there is no support for Right-To-Left rendering in Windows Phone 7, when developing with Silverlight (itself built on .NET Compact Framework). When I encountered that limitation, I had a flashback to 2005 when I complained about the luck of RTL on NETCF. Unfortunately, the partial solution I proposed back then requires PInvoke and there is no such support on Windows Phone today. Fortunately, my RTL requirements this time were more modest: all I wanted to do was display correctly a translation (of Hebrew or Arabic) in my FREE WP7 translator app. For v1.0 of the app, the code received a string from the service and just put it up on the screen as the translated text. In Arabic and Hebrew, that string (incorrectly) appeared reversed. I knew that, but decided that since it is a platform limitation, I could live with it and so could the users. Yuval P, a colleague at Microsoft, pushed me to offer support for Hebrew (something that I wasn't motivated to pursue if I am honest). After many back and forths, we landed on some code that works. It is certainly not the most efficient code (quite the opposite), but it works and met the bar of minimum effort for v1.1. Thanks Yuval for insisting and contributing most of the code! After Hebrew support was there, I thought the same solution would work for Arabic. Apparently, reversing the Arabic text is not enough: Arabic characters render themselves differently dependent on what preceded/succeeds them(!). So I needed some kind of utility that takes a reversed Arabic string and returns the same string but with the relevant characters "fixed". Luckily, another MS colleague has put out such a library (thanks Bashar): http://arabic4wp7.codeplex.com/. RTL Solution So you have a reversed RTL string and want to make it "right" before displaying on the screen. This is what worked for me (ymmv). Need to split the string into "lines". Not doing this and just reversing the string and sticking it a wrapping text control means that the user not only has to read right to left, they also have to read bottom up. The previous step must take into account a line length that works for both portrait and landscape modes, and of course, not break words in the middle, i.e. find natural breaks. For each line, break it up into words and reverse the order of the words and the order of the letters within each word On the previous step, do not reverse words that should be preserved, e.g. Windows and other such English words that are mixed in with the Arabic or Hebrew words. The same exclusion from reversal applies to numbers. Specifically, for Arabic, once there is a word that is reversed also change its characters. For some code paths, the above has to take into account whether the translation is "from" an RTL language or if it is "to" an RTL language. I packaged the solution in a single code file containing a static class (see the 'Background" section above for… background and credits). Download RTL.cs for your Windows Phone app (to see its usage in action download for FREE "The best translator app") Enjoy, and if you decide to improve on the code, feel free to share back with me… Comments about this post welcome at the original blog.

  Read the article

• SQL SERVER – Discard Results After Query Execution – SSMS

  - by pinaldave

  The first thing I do any day is to turn on the computer. Today I woke up and as soon as I turned on the computer I saw a chat message from a friend. He was a bit confused and wanted me to help him. Just as usual I am keeping the relevant conversation in focus and documenting our conversation as chat. Let us call him Ajit. Ajit: Pinal, every time I run a query there is no result displayed in the SSMS but when I run the query in my application it works and returns an appropriate result. Pinal:  Have you tried with different parameters? Ajit: Same thing. However, it works from another computer when I connect to the same server with the same query parameters? Pinal: What? That is new and I believe it is something to do with SSMS and not with the server. Send me screenshot please. Ajit: I believe so, let me send you a screenshot, Pinal: (looking at the screenshot) Oh man, there is no result-tab at all. Ajit: That is what the problem is. It does not have the tab which displays the result. This works just fine from another computer. Pinal: Have you referred Nakul’s blog post – SSMS – Query result options – Discard result after query executes, that talks about setting which can discard the query results after execution. (After a while) Ajit: I think it seems like on the computer where I am running the query my SSMS seems to have the option enabled related to discarding results. I fixed it by following Nakul’s blog post. Pinal: Great! Quite often I get the question what is the importance of the feature. Let us first see how to turn on or turn off this feature in SQL Server Management Studio 2012. In SSMS 2012 go to Tools >> Options >> Query Results > SQL Server >> Results to Grid >> Discard Results After Query Execution. When enabled this option will discard results after the execution. The advantage of disabling the option is that it will improve the performance by using less memory. However the real question is why would someone enable or disable the option. What are the cases when someone wants to run the query but do not care about the result? Matter of the fact, it does not make sense at all to run query and not care about the result. The matter of the fact, I can see quite a few reasons for using this option. I often enable this option when I am doing performance tuning exercise. During performance tuning exercise when I am working with execution plans and do not need results to verify every time or when I am tuning Indexes and its effect on execution plan I do not need the results. In this kind of situations I do keep this option on and discard the results. It always helps me big time as in most of the performance tuning exercise I am dealing with huge amount of the data and dealing with this data can be expensive. Nakul’s has done the experiment here already but I am going to repeat the same again using AdventureWorks Database. Run following T-SQL Script with and without enabling the option to discard the results. USE AdventureWorks2012 GO SELECT * FROM Sales.SalesOrderDetail GO 10 After enabling Discard Results After Query Execution After disabling Discard Results After Query Execution Well, this is indeed a good option when someone is debugging the execution plan or does not want the result to be displayed. Please note that this option does not reduce IO or CPU usage for SQL Server. It just discards the results after execution and a good help for debugging on the development server. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Server Management Studio, SQL Tips and Tricks, T SQL, Technology

  Read the article

• Tuning Red Gate: #3 of Lots

  - by Grant Fritchey

  I'm drilling down into the metrics about SQL Server itself available to me in the Analysis tab of SQL Monitor to see what's up with our two problematic servers. In the previous post I'd noticed that rg-sql01 had quite a few CPU spikes. So one of the first things I want to check there is how much CPU is getting used by SQL Server itself. It's possible we're looking at some other process using up all the CPU Nope, It's SQL Server. I compared this to the rg-sql02 server: You can see that there is a more, consistently low set of CPU counters there. I clearly need to look at rg-sql01 and capture more specific data around the queries running on it to identify which ones are causing these CPU spikes. I always like to look at the Batch Requests/sec on a server, not because it's an indication of a problem, but because it gives you some idea of the load. Just how much is this server getting hit? Here are rg-sql01 and rg-sql02: Of the two, clearly rg-sql01 has a lot of activity. Remember though, that's all this is a measure of, activity. It doesn't suggest anything other than what it says, the number of requests coming in. But it's the kind of thing you want to know in order to understand how the system is used. Are you seeing a correlation between the number of requests and the CPU usage, or a reverse correlation, the number of requests drops as the CPU spikes? See, it's useful. Some of the details you can look at are Compilations/sec, Compilations/Batch and Recompilations/sec. These give you some idea of how the cache is getting used within the system. None of these showed anything interesting on either server. One metric that I like (even though I know it can be controversial) is the Page Life Expectancy. On the average server I expect see a series of mountains as the PLE climbs then drops due to a data load or something along those lines. That's not the case here: Those spikes back in January suggest that the servers weren't really being used much. The PLE on the rg-sql01 seems to be somewhat consistent growing to 3 hours or so then dropping, but the rg-sql02 PLE looks like it might be all over the map. Instead of continuing to look at this high level gathering data view, I'm going to drill down on rg-sql02 and see what it's done for the last week: And now we begin to see where we might have an issue. Memory on this system is getting flushed every 1/2 hour or so. I'm going to check another metric, scans: Whoa! I'm going back to the system real quick to look at some disk information again for rg-sql02. Here is the average disk queue length on the server: and the transfers Right, I think I have a guess as to what's up here. We're seeing memory get flushed constantly and we're seeing lots of scans. The disks are queuing, especially that F drive, and there are lots of requests that correspond to the scans and the memory flushes. In short, we've got queries that are scanning the data, a lot, so we either have bad queries or bad indexes. I'm going back to the server overview for rg-sql02 and check the Top 10 expensive queries. I'm modifying it to show me the last 3 days and the totals, so I'm not looking at some maintenance routine that ran 10 minutes ago and is skewing the results: OK. I need to look into these queries that are getting executed this much. They're generating a lot of reads, but which queries are generating the most reads: Ow, all still going against the same database. This is where I'm going to temporarily leave SQL Monitor. What I want to do is connect up to the server, validate that the Warehouse database is using the F:\ drive (which I'll put money down it is) and then start seeing what's up with these queries. Part 1 of the Series Part 2 of the Series

  Read the article

• Review: A Quick Look at Reflector

  - by James Michael Hare

  I, like many, was disappointed when I heard that Reflector 7 was not free, and perhaps that’s why I waited so long to try it and just kept using my version 6 (which continues to be free).  But though I resisted for so long, I longed for the better features that were being developed, and began to wonder if I should upgrade.  Thus, I began to look into the features being offered in Reflector 7.5 to see what was new. Multiple Editions Reflector 7.5 comes in three flavors, each building on the features of the previous version: Standard – Contains just the Standalone application ($70) VS – Same as Standard but adds Reflector Object Browser for Visual Studio ($130) VSPro – Same as VS but adds ability to set breakpoints and step into decompiled code ($190) So let’s examine each of these features. The Standalone Application (Standard, VS, VSPro editions) Popping open Reflector 7.5 and looking at the GUI, we see much of the same familiar features, with a few new ones as well: Most notably, the disassembler window now has a tabbed window with navigation buttons.  This makes it much easier to back out of a deep-dive into many layers of decompiled code back to a previous point. Also, there is now an analyzer which can be used to determine dependencies for a given method, property, type, etc. For example, if we select System.Net.Sockets.TcpClient and hit the Analyze button, we’d see a window with the following nodes we could expand: This gives us the ability to see what a given type uses, what uses it, who exposes it, and who instantiates it. Now obviously, for low-level types (like DateTime) this list would be enormous, but this can give a lot of information on how a given type is connected to the larger code ecosystem. One of the other things I like about using Reflector 7.5 is that it does a much better job of displaying iterator blocks than Reflector 6 did. For example, if you were to take a look at the Enumerable.Cast() extension method in System.Linq, and dive into the CastIterator in Reflector 6, you’d see this: But now, in Reflector 7.5, we see the iterator logic much more clearly: This is a big improvement in the quality of their code disassembler and for me was one of the main reasons I decided to take the plunge and get version 7.5. The Reflector Object Browser (VS, VSPro editions) If you have the .NET Reflector VS or VSPro editions, you’ll find you have in Visual Studio a Reflector Object Browser window available where you can select and decompile any assembly right in Visual Studio. For example, if you want to take a peek at how System.Collections.Generic.List<T> works, you can either select List<T> in the Reflector Object Browser, or even simpler just select a usage of it in your code and CTRL + Click to dive in. – And it takes you right to a source window with the decompiled source: Setting Breakpoints and Stepping Into Decompiled Code (VSPro) If you have the VSPro edition, in addition to all the things said above, you also get the additional ability to set breakpoints in this decompiled code and step through it as if it were your own code: This can be a handy feature when you need to see why your code’s use of a BCL or other third-party library isn’t working as you expect. Summary Yes, Reflector is no longer free, and yes, that’s a bit of a bummer. But it always was and still is a very fine tool. If you still have Reflector 6, you aren’t forced to upgrade any longer, but getting the nicer disassembler (especially for iterator blocks) and the handy VS integration is worth at least considering upgrading for.  So I leave it up to you, these are some of the features of Reflector 7.5, what’s your thoughts? Technorati Tags: .NET,Reflector

  Read the article

• BizTalk 2009 - Architecture Decisions

  - by StuartBrierley

  In the first step towards implementing a BizTalk 2009 environment, from development through to live, I put forward a proposal that detailed the options available, as well as the costs and benefits associated with these options, to allow an informed discusion to take place with the business drivers and budget holders of the project.  This ultimately lead to a decision being made to implement an initial BizTalk Server 2009 environment using the Standard Edition of the product. It is my hope that in the long term, as projects require it and allow, we will be looking to implement my ideal recommendation of a multi-server enterprise level environment, but given the differences in cost and the likely initial work load for the environment this was not something that I could fully recommend at this time.  However, it must be noted that this decision was made in full awareness of the limits of the standard edition, and the business drivers of this project were made fully aware of the risks associated with running without the failover capabilities of the enterprise edition. When considering the creation of this new BizTalk Server 2009 environment, I have also recommended the creation of the following pre-production environments:   Usage Environment Development Development of solutions; Unit testing against technical specifications; Initial load testing; Testing of deployment packages;  Visual Studio; BizTalk; SQL; Client PCs/Laptops; Server environment similar to Live implementation; Test Testing of Solutions against business and technical requirements;  BizTalk; SQL; Server environment similar to Live implementation; Pseudo-Live As Live environment to allow testing against Live implementation; Acts as back-up hardware in case of failure of Live environment; BizTalk; SQL; Server environment identical to Live implementation; The creation of these differing environments allows for the separation of the various stages of the development cycle.  The development environment is for use when actively developing a solution, it is a potentially volatile environment whose state at any given time can not be guaranteed.  It allows developers to carry out initial tests in an environment that is similar to the live environment and also provides an area for the testing of deployment packages prior to any release to the test environment. The test environment is intended to be a semi-volatile environment that is similar to the live environment.  It will change periodically through the development of a solution (or solutions) but should be otherwise stable.  It allows for the continued testing of a solution against requirements without the worry that the environment is being actively changed by any ongoing development.  This separation of development and test is crucial in ensuring the quality and control of the tested solution. The pseudo-live environment should be considered to be an almost static environment.  It should mimic the live environment and can act as back up hardware in the case of live failure.  This environment acts as an area to allow for “as live” testing, where the performance and behaviour of the live solutions can be replicated.  There should be relatively few changes to this environment, with software releases limited to “release candidate” level releases prior to going live. Whereas the pseudo-live environment should always mimic the live environment, to save on costs the development and test servers could be implemented on lower specification hardware.  Consideration can also be given to the use of a virtual server environment to further reduce hardware costs in the development and test environments, indeed this virtual approach can also be extended to pseudo-live and live assuming the underlying technology is in place. Although there is no requirement for the development and test server environments to be identical to live, the overriding architecture implemented should be the same as in live and an understanding must be gained of the performance differences to be expected across the different environments.

  Read the article

• Some thoughts on email hosting for one’s own domain

  - by jamiet

  I have used the same email providers for my own domains for a few years now however I am considering moving over to a new provider. In this email I’ll share my current thoughts and hopefully I’ll get some feedback that might help me to decide on what to do next. What I use today I have three email addresses that I use primarily (I have changed the domains in this blog post as I don’t want to give them away to spammers): [email protected] – My personal account that I give out to family and friends and which I use to register on websites [email protected]  - An account that I use to catch email from the numerous mailing lists that I am on [email protected] – I am a self-employed consultant so this is an account that I hand out to my clients, my accountant, and other work-related organisations Those two domains (jtpersonaldomain.com & jtworkdomain.com) are both managed at http://domains.live.com which is a fantastic service provided by Microsoft that for some perplexing reason they never bother telling anyone about. It offers multiple accounts (I have seven at jtpersonaldomain.com though as already stated I only use two of them) which are accessed via Outlook.com (formerly Hotmail.com) along with usage reporting plus a few other odds and sods that I never use. Best of all though, its totally free. In addition, given that I have got both domains hosted using http://domains.live.com I can link my various accounts together and switch between them at Outlook.com without having to login and logout: N.B. You’ll notice that there are two other accounts listed there in addition to the three I already mentioned. One is my mum’s account which helps me provide IT support/spam filtering services to her and the other is the donation account for AdventureWorks on Azure. I find that linking feature to be very handy indeed. Finally, http://domains.live.com is the epitome of “it just works”. I set up jtworkdomain.com at http://domains.live.com over three years ago and I am pretty certain I haven’t been back there even once to administer it. Proposed changes OK, so if I like http://domains.live.com so much why am I considering changing? Well, I earn my corn in the Microsoft ecosystem and if I’m reading the tea-leaves correctly its looking increasingly likely that the services that I’m going to have to be familiar with in the future are all going to be running on top of and alongside Windows Azure Active Directory and Office 365 respectively. Its clear to me that Microsoft’s are pushing their customers toward cloud services and, like it or lump it, data integration developers like me may have to come along for the ride. I don’t think the day is too far off when we can log into Windows Azure SQL Database (aka SQL Azure), Team Foundation Service, Dynamics etc… using the same credentials that are currently used for Office 365 and over time I would expect those things to get integrated together a lot better – that integration will be based upon a Windows Azure Active Directory identity. This should not come as a surprise, in my opinion Microsoft’s whole enterprise play over the past 15 or 20 years can be neatly surmised as “get people onto Windows Server and Active Directory then upsell from there” – in the not-too-distant-future the only difference is that they’re trying to do it in the cloud. I want to get familiar with these services and hence I am considering moving jtworkdomain.com onto Office 365. I’ll lose the convenience of easily being able to switch to that account at Outlook.com and moreover I’ll have to start paying for it (I think it’ll be about fifty quid a year – not a massive amount but its quite a bit more than free) but increasingly this is beginning to look like a move I have to make. So that’s where my head is at right now. Anyone have any relevant thoughts or experiences to share? Please let me know in the comments below. @Jamiet

  Read the article

• Build Your Own CE6 Kernel

  - by Kate Moss' Big Fan

  The Share Source Program in Windows CE provides many modules in %_WINCEROOT%\Private\ tree, and the kernel is one of them! Although it is not full source of kernel but it is good enough for tracing it, even tweak the kernel. Tracing the kernel and see how it works is lots of fun, but it is fascinated to modify and verify the change you made. So first comes first, where is the source of kernel? It's in your %_WINCEROOT%\private\winceos\COREOS\nk\ And next question will be "How do I build it?", Some of you may say just "build -c" there and it should be good. If you are the owner of kernel and got full source, that is definitely the right answer, but none of them are applied to our case though. So what should I do? Let's dig deeper into the coreos\nk folder, there are a couples of subfolder, CELOG, KDSTUB, KERNEL and etc. KERNEL\ is the main component of kernel.dll, in the other word, most of the modify to kernel is going to happen here. And the good thing is, you could "build -c" in %_WINCEROOT%\private\winceos\COREOS\nk\kernel\ with no error at all. But before doing that, remember to backup eveything you are going to modify, including the source and binaries; remember, this is not something belong to you, and if you didn't restore them back later, it could end up confuse the subsequence QFE updates! Here is the steps Backup the source code, I will suggest the whole %_WINCEROOT%\private\winceos\COREOS\nk\ Backup the binaries in common\oak\lib\, and again if you are not sure which files, backup the whole %_WINCEROOT%\common\oak\lib\ is the safest way. Do whatever modification you want in %_WINCEROOT%\private\winceos\COREOS\nk\kernel\ build -c in %_WINCEROOT%\private\winceos\COREOS\nk\kernel If everything went well so far, you should get a new nkmain.lib,nkmain.pdb, nkprmain.lib and nkprmain.pdb in %_WINCEROOT%\public\common\oak\lib\%_TGTCPU%\%WINCEDEBUG%\ Basically, you just rebuild your new kernel, the rest is to "blddemo clean -q" to have your new kernel SYSGEN'd and include in your OS Image. Or just "set WINCEREL=1" then "sysgen -p common nk nkprof" and "makeimg" if you can't wait another minutes for "blddemo clean -q" Tat sounds good, but some of you may not like the idea to alter any code in private folder, and not to mention how annoying to backup/restore files every time. Better idea? Yes, Microsoft provides a tool SYSGEN_CAPTURE (http://msdn.microsoft.com/en-us/library/ee504678.aspx for detail and usage) to creates Sources files for public drivers that you want to modify and build in your platform directory. In fact, not only public drivers, virtually anything in the %_WINCEROOT%\public\<project name>\cesysgen\makefile can be captured, and of course including kernel. So I am going to introduce a second way to build your own kernel by using SYSGEN_CAPTURE tool. Again the steps Create a folder in your BSP for building kernel, says %_TARGETPLATROOT%\SRC\Kernel. Use "SYSGEN_CAPTURE -p common nk" and then you will get a SOURCES.KERN, you could also "SYSGEN_CAPTURE -p common nkprof" to generate profiler enabled kernel. rename the SOURCE.KERN to SOURCES and copy one of the sample makefile into your kernel directory. For example the one in PRIVATE\WINCEOS\COREOS\NK\KERNEL\NKNORMAL. Copy the source files you want to modify from private\winceos\coreos\nk\kernel\ into your kernel directory. Modifying the SOURCES= macro to the source files you addes in step 4. For example, if you copied the vm.c, it is going to be SOURCES=vm.c Refer to the private\winceos\COREOS\nk\kernel\sources.inc and add macro defines and proper include path in your SOURCES file. "set WINCEREL=1", "build -c" in your kernel directory and "makeimg", voila! Here is an example for the MACROS you need to add in x86 Here are the macros for x86 CDEFINES=$(CDEFINES) -DIN_KERNEL -DWINCEMACRO -DKERN_CORE # Machine independent defines CDEFINES=$(CDEFINES) -DDBGSUPPORT _COREOSROOT=$(_WINCEROOT)\private\winceos\coreos INCLUDES=$(_COREOSROOT)\inc;$(_COREOSROOT)\nk\inc !IFDEF DP_SETTINGS CDEFINES=$(CDEFINES) -DDP_SETTINGS=$(DP_SETTINGS) !ENDIF ASM_SAFESEH=1 CDEFINES=$(CDEFINES) -Gs100000 -DENCODE_GS_COOKIE

  Read the article

• SQL SERVER – Speed Up! – Parallel Processes and Unparalleled Performance – TechEd 2012 India

  - by pinaldave

  TechEd India 2012 is just around the corner and I will be presenting there on two different session. SQL Server Performance Tuning is a very challenging subject that requires expertise in Database Administration and Database Development. I always have enjoyed talking about SQL Server Performance tuning subject. Just like doctors I like to call my every attempt to improve the performance of SQL Server queries and database server as a practice too. I have been working with SQL Server for more than 8 years and I believe that many of the performance tuning concept I have mastered. However, performance tuning is not a simple subject. However there are occasions when I feel stumped, there are occasional when I am not sure what should be the next step. When I face situation where I cannot figure things out easily, it makes me most happy because I clearly see this as a learning opportunity. I have been presenting in TechEd India for last three years. This is my fourth time opportunity to present a technical session on SQL Server. Just like every other year, I decided to present something different, something which I have spend years of learning. This time, I am going to present about parallel processes. It is widely believed that more the CPU will improve performance of the server. It is true in many cases. However, there are cases when limiting the CPU usages have improved overall health of the server. I will be presenting on the subject of Parallel Processes and its effects. I have spent more than a year working on this subject only. After working on various queries on multi-CPU systems I have personally learned few things. In coming TechEd session, I am going to share my experience with parallel processes and performance tuning. Session Details Title: Speed Up! – Parallel Processes and Unparalleled Performance (Add to Calendar) Abstract: “More CPU More Performance” – A  very common understanding is that usage of multiple CPUs can improve the performance of the query. To get maximum performance out of any query – one has to master various aspects of the parallel processes. In this deep dive session, we will explore this complex subject with a very simple interactive demo. An attendee will walk away with proper understanding of CX_PACKET wait types, MAXDOP, parallelism threshold and various other concepts. Date and Time: March 23, 2012, 12:15 to 13:15 Location: Hotel Lalit Ashok - Kumara Krupa High Grounds, Bengaluru – 560001, Karnataka, India. Add to Calendar Please submit your questions in the comments area and I will be for sure discussing them during my session. If I pick your question to discuss during my session, here is your gift I commit right now – SQL Server Interview Questions and Answers Book. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Performance, SQL Query, SQL Server, SQL Tips and Tricks, SQL Wait Stats, SQL Wait Types, T SQL, Technology Tagged: TechEd, TechEdIn

  Read the article

• Unclaimed user group prizes, Live meeting on Monday, Next weeks UG, SQLRelay and more prizes

  - by Testas

    Hi Everyone Firstly I want to let you know that I finally found the LINQ book prize winners and the list of people at the bottom of this email are owed a LINQ book. This will be given out at next week’s UG meeting Live meeting with Carolyn Chau, Program Manager at Microsoft on Monday! It is very rare that we get the opportunity to have a Live meeting with a Program Manager in Redmond. Carolyn Chau will be presenting PowerView next Monday at 8pm. Live meeting details can be found on http://sqlserverfaq.com/events/388/Live-Meeting-on-SQL-Server-2012-PowerView-with-Carolyn-Chau-Principal-Program-Manager-in-the-Reporting-Services-in-association-with-SQLPASS-SQLServerFAQ-and-SQLBits.aspx Next week’s UG!! We welcome Mark Broadbent to Manchester next week where he will be presenting his session on SQL Server 2012 on Windows Core. We also hand out the unclaimed prizes. Register at http://sqlserverfaq.com/events/369/Thursday-night-meeting-at-BSS-with-Chris-TestaONeill-and-Mark-Broadbent.aspx Chris Webb is in Manchester!!! Chris Webb will be speaking at the Manchester SQL Server UG on 4th July. He will also be running his Real World Cube Design and Performance Tuning with Analysis Services between the 3rd – 5th July. If you want to attend then you can sign up at the link below http://www.technitrain.com/coursedetail.php?c=13&trackingcode=FAQ SQLRelay and a Special Prize and Jamie Thomson comes to Manchester!!!! SQLRelay takes place in Manchester on the 22nd. We have a special guest, after years of asking Jamie Thomson is coming to Manchester. The SSIS Junkie will be gracing us with his presence with a talk on SSIS 2012. Also we have a prize. Know a friend or colleague who would benefit from SQLRelay? Get them to register at www.sqlserverfaq.com and then register for the event http://sqlserverfaq.com/events/373/ALL-DAY-TUESDAY-EVENT-12-hours-of-SQL-Server-2012-at-the-SQLRelay-meeting-at-the-COOP-Manchester.aspx Then send an email to [email protected] with the subject of SQLFriend with the name of your friend. If you are both at the SQLRelay event on the day and your names are pulled out of the hat you will win a PASS 2011 DVD and your friend will win the “Best of PASS DVD 2011” worth  $1000 courtesy of SQLPASS. The draw will take place between 4.30pm – 5pm on the day. SQLBits feedback!!!!! Attended SQLBits? We really need to know your opinion. Please fill out the survey for the days you attended If you attended any of the days at SQLBits please can you all fill out the following survey http://www.sqlbits.com/SQLBitsX If you attended the Thursday Training day then please fill out the following survey: http://www.sqlbits.com/SQLBitsXThursday If you attended the Friday Deep Dives day then please fill out the following survey: http://www.sqlbits.com/SQLBitsXFriday If you attended the Saturday Community day then please fill out the following survey: http://www.sqlbits.com/SQLBitsXSaturday Thanks   Chris and Martin   LINQ BOOK winners Andrew Birds Chris Kennedy Dave Carpenter David Forrester Ian Ringrose James Cullen James Simpson Kevan Riley Kirsty Hunter Martin Bell Martin Croft Michael Docherty Naga Anand Ram Mangipudi Neal Atkinson Nick Colebourn Pavel Nefyodov Ralph Baines Rick Hibbert saad saleh Simon Enion Stan Venn Steve Powell Stuart Quinn

  Read the article

• Stretch in multiple components using af:popup, af:region, af:panelTabbed

  - by Arvinder Singh

  Case study: I have a pop-up(dialogue) that contains a region(separate taskflow) showing a tab. The contents of this tab is in a region having a separate taskflow. The jsff page of this taskflow contains a panelSplitter which in turn contains a table. In short the components are : pop-up(dialogue) --> region(separate taskflow) --> tab --> region(separate taskflow) --> panelSplitter --> table At times the tab is not displayed with 100% width or the table in panelSplitter is not 100% visible or the splitter is not visible. Maintaining the stretch for all the components is difficult......not any more!!! Below is the solution that you can make use of in many similar scenarios. I am mentioning the major code snippets affecting the stretch and alignment. pop-up: <af:popup> <af:dialog id="d2" type="none" title="" inlineStyle="width:1200px"> <af:region value="#{bindings.PriceChangePopupFlow1.regionModel}" id="r1"/> </af:dialog> The above region is a jsff containing multiple tabs. I am showing code for a single tab. I kept the tab in a panelStretchLayout. <af:panelStretchLayout id="psl1" topHeight="300px" styleClass="AFStretchWidth"> <af:panelTabbed id="pt1"> <af:showDetailItem text="PO Details" id="sdi1" stretchChildren="first" > <af:region value="#{bindings.PriceChangePurchaseOrderFlow1.regionModel}" id="r1" binding="# {pageFlowScope.priceChangePopupBean.poDetailsRegion}" /> This "region" displays a .jsff containing a table in a panelSplitter. <af:panelSplitter id="ps1"  orientation="horizontal" splitterPosition="700"> <f:facet name="first"> <af:panelHeader text="PurchaseOrder" id="ph1"> <af:table id="md1" rows="#{bindings.PurchaseOrderVO.rangeSize}" That's it!!! We're done... Note the stretchChildren="first" attribute in the af:showDetailItem. That does the trick for us. Oracle docs say the following about stretchChildren :  Valid Values: none, first The stretching behavior for children. Acceptable values include: "none": does not attempt to stretch any children (the default value and the value you need to use if you have more than a single child; also the value you need to use if the child does not support being stretched) "first": stretches the first child (not to be used if you have multiple children as such usage will produce unreliable results; also not to be used if the child does not support being stretched)

  Read the article

• Employee Info Starter Kit: Project Mission

  - by Mohammad Ashraful Alam

  Employee Info Starter Kit is an open source ASP.NET project template that is intended to address different types of real world challenges faced by web application developers when performing common CRUD operations. Using a single database table ‘Employee’, it illustrates how to utilize Microsoft ASP.NET 4.0, Entity Framework 4.0 and Visual Studio 2010 effectively in that context. Employee Info Starter Kit is highly influenced by the concept ‘Pareto Principle’ or 80-20 rule. where it is targeted to enable a web developer to gain 80% productivity with 20% of effort with respect to learning curve and production. User Stories The user end functionalities of this starter kit are pretty simple and straight forward that are focused in to perform CRUD operation on employee records as described below. Creating a new employee record Read existing employee record Update an existing employee record Delete existing employee records Key Technology Areas ASP.NET 4.0 Entity Framework 4.0 T-4 Template Visual Studio 2010 Architectural Objective There is no universal architecture which can be considered as the best for all sorts of applications around the world. Based on requirements, constraints, environment, application architecture can differ from one to another. Trade-off factors are one of the important considerations while deciding a particular architectural solution. Employee Info Starter Kit is highly influenced by the concept ‘Pareto Principle’ or 80-20 rule, where it is targeted to enable a web developer to gain 80% productivity with 20% of effort with respect to learning curve and production. “Productivity” as the architectural objective typically also includes other trade-off factors as well as, such as testability, flexibility, performance etc. Fortunately Microsoft .NET Framework 4.0 and Visual Studio 2010 includes lots of great features that have been implemented cleverly in this project to reduce these trade-off factors in the minimum level. Why Employee Info Starter Kit is Not a Framework? Application frameworks are really great for productivity, some of which are really unavoidable in this modern age. However relying too many frameworks may overkill a project, as frameworks are typically designed to serve wide range of different usage and are less customizable or editable. On the other hand having implementation patterns can be useful for developers, as it enables them to adjust application on demand. Employee Info Starter Kit provides hundreds of “connected” snippets and implementation patterns to demonstrate problem solutions in actual production environment. It also includes Visual Studio T-4 templates that generate thousands lines of data access and business logic layer repetitive codes in literally few seconds on the fly, which are fully mock testable due to language support for partial methods and latest support for mock testing in Entity Framework. Why Employee Info Starter Kit is Different than Other Open-source Web Applications? Software development is one of the rapid growing industries around the globe, where the technology is being updated very frequently to adapt greater challenges over time. There are literally thousands of community web sites, blogs and forums that are dedicated to provide support to adapt new technologies. While some are really great to enable learning new technologies quickly, in most cases they are either too “simple and brief” to be used in real world scenarios or too “complex and detailed” which are typically focused to achieve a product goal (such as CMS, e-Commerce etc) from "end user" perspective and have a long duration learning curve with respect to the corresponding technology. Employee Info Starter Kit, as a web project, is basically "developer" oriented which actually considers a hybrid approach as “simple and detailed”, where a simple domain has been considered to intentionally illustrate most of the architectural and implementation challenges faced by web application developers so that anyone can dive into deep into the corresponding new technology or concept quickly. Roadmap Since its first release by 2008 in MSDN Code Gallery, Employee Info Starter Kit gained a huge popularity in ASP.NET community and had 1, 50,000+ downloads afterwards. Being encouraged with this great response, we have a strong commitment for the community to provide support for it with respect to latest technologies continuously. Currently hosted in Codeplex, this community driven project is planned to have a wide range of individual editions, each of which will be focused on a selected application architecture, framework or platform, such as ASP.NET Webform, ASP.NET Dynamic Data, ASP.NET MVC, jQuery Ajax (RIA), Silverlight (RIA), Azure Service Platform (Cloud), Visual Studio Automated Test etc. See here for full list of current and future editions.

  Read the article

• Edit the Windows Live Writer Custom Dictionary

  - by Matthew Guay

  Windows Live Writer is a great tool for writing and publishing posts to your blog, but its spell check unfortunately doesn’t include many common tech words.  Here’s how you can easily edit your custom dictionary and add your favorite words. Customize Live Writer’s Dictionary Adding an individual word to the Windows Live Writer dictionary works as you would expect.  Right-click on a word and select Add to dictionary. And changing the default spell check settings is easy too.  In the menu, click Tools, then Options, and select the Spelling tab in this dialog.  Here you can choose your dictionary language and turn on/off real-time spell checking and other settings. But there’s no obvious way to edit your custom dictionary.  Editing the custom dictionary directly is nice if you accidently add a misspelled word to your dictionary and want to remove it, or if you want to add a lot of words to the dictionary at once. Live Writer actually stores your custom dictionary entries in a plain text file located in your appdata folder.  It is saved as User.dic in the C:\Users\user_name\AppData\Roaming\Windows Live Writer\Dictionaries folder.  The easiest way to open the custom dictionary is to enter the following in the Run box or the address bar of an Explorer window: %appdata%\Windows Live Writer\Dictionaries\User.dic   This will open the User.dic file in your default text editor.  Add any new words to the custom dictionary on separate lines, and delete any misspelled words you accidently added to the dictionary.   Microsoft Office Word also stores its custom dictionary in a plain text file.  If you already have lots of custom words in it and want to import them into Live Writer, enter the following in the Run command or Explorer’s address bar to open Word’s custom dictionary.  Then copy the words, and past them into your Live Writer custom dictionary file. %AppData%\Microsoft\UProof\Custom.dic Don’t forget to save the changes when you’re done.  Note that the changes to the dictionary may not show up in Live Writer’s spell check until you restart the program.  If it’s currently running, save any posts you’re working on, exit, and then reopen, and all of your new words should be in the dictionary. Conclusion Whether you use Live Writer daily in your job or occasionally post an update to a personal blog, adding your own custom words to the dictionary can save you a lot of time and frustration in editing.  Plus, if you’ve accidently added a misspelled word to the dictionary, this is a great way to undo your mistake and make sure your spelling is up to par! Similar Articles Productive Geek Tips Backup Your Windows Live Writer SettingsTransfer or Move Your Microsoft Office Custom DictionaryFuture Date a Post in Windows Live WriterTools to Help Post Content On Your WordPress BlogInstall Windows Live Essentials In Windows 7 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows Video Toolbox is a Superb Online Video Editor Fun with 47 charts and graphs Tomorrow is Mother’s Day Check the Average Speed of YouTube Videos You’ve Watched OutlookStatView Scans and Displays General Usage Statistics How to Add Exceptions to the Windows Firewall

  Read the article

• SQLUG Events - London/Edinburgh/Cardiff/Reading - Masterclass, NoSQL, TSQL Gotcha's, Replication, BI

  - by tonyrogerson

  We have acquired two additional tickets to attend the SQL Server Master Class with Paul Randal and Kimberly Tripp next Thurs (17th June), for a chance to win these coveted tickets email us ([email protected]) before 9pm this Sunday with the subject "MasterClass" - people previously entered need not worry - your still in with a chance. The winners will be announced Monday morning.As ever plenty going on physically, we've got dates for a stack of events in Manchester and Leeds, I'm looking at Birmingham if anybody has ideas? We are growing our online community with the Cuppa Corner section, to participate online remember to use the #sqlfaq twitter tag; for those wanting to get more involved in presenting and fancy trying it out we are always after people to do 1 - 5 minute SQL nuggets or Cuppa Corners (short presentations) at any of these User Group events - just email us [email protected] removing from this email list? Then just reply with remove please on the subject line.Kimberly Tripp and Paul Randal Master Class - Thurs, 17th June - LondonREGISTER NOW AND GET A SECOND REGISTRATION FREE*The top things YOU need to know about managing SQL Server - in one place, on one day - presented by two of the best SQL Server industry trainers!This one-day MasterClass will focus on many of the top issues companies face when implementing and maintaining a SQL Server-based solution. In the case where a company has no dedicated DBA, IT managers sometimes struggle to keep the data tier performing well and the data available. This can be especially troublesome when the development team is unfamiliar with the affect application design choices have on database performance.The Microsoft SQL Server MasterClass 2010 is presented by Paul S. Randal and Kimberly L. Tripp, two of the most experienced and respected people in the SQL Server world. Together they have over 30 years combined experience working with SQL Server in the field, and on the SQL Server product team itself. This is a unique opportunity to hear them present at a UK event which will:>> Debunk many of the ingrained misconceptions around SQL Server's behaviour >> Show you disaster recovery techniques critical to preserving your company's life-blood - the data >> Explain how a common application design pattern can wreak havoc in the database >> Walk through the top-10 points to follow around operations and maintenance for a well-performing and available data tier! Where: Radisson Edwardian Heathrow Hotel, LondonWhen: Thursday 17th June 2010*REGISTER TODAY AT www.regonline.co.uk/kimtrippsql on the registration form simply quote discount code: BOGOF for both yourself and your colleague and you will save 50% off each registration – that’s a 249 GBP saving! This offer is limited, book early to avoid disappointment.Wed, 23 JunREADINGEvening Meeting, More info and registerIntroduction to NoSQL (Not Only SQL) - Gavin Payne; T-SQL Gotcha's and how to avoid them - Ashwani Roy; Introduction to Recency Frequency - Tony Rogerson; Reporting Services - Tim LeungThu, 24 JunCARDIFFEvening Meeting, More info and registerAlex Whittles of Purple Frog Systems talks about Data warehouse design case studies, Other BI related session TBC Mon, 28 JunEDINBURGHEvening Meeting, More info and registerReplication (Components, Adminstration, Performance and Troubleshooting) - Neil Hambly Server Upgrades (Notes and Best practice from the field) - Satya Jayanty Wed, 14 JulLONDONEvening Meeting, More info and registerMeeting is being sponsored by DBSophic (http://www.dbsophic.com/download), database optimisation software. Physical Join Operators in SQL Server - Ami LevinWorkload Tuning - Ami LevinSQL Server and Disk IO (File Groups/Files, SSD's, Fusion-IO, In-RAM DB's, Fragmentation) - Tony RogersonComplex Event Processing - Allan MitchellMany thanks,Tony Rogerson, SQL Server MVPUK SQL Server User Grouphttp://sqlserverfaq.com"

  Read the article

• Merge sort versus quick sort performance

  - by Giorgio

  I have implemented merge sort and quick sort using C (GCC 4.4.3 on Ubuntu 10.04 running on a 4 GB RAM laptop with an Intel DUO CPU at 2GHz) and I wanted to compare the performance of the two algorithms. The prototypes of the sorting functions are: void merge_sort(const char **lines, int start, int end); void quick_sort(const char **lines, int start, int end); i.e. both take an array of pointers to strings and sort the elements with index i : start <= i <= end. I have produced some files containing random strings with length on average 4.5 characters. The test files range from 100 lines to 10000000 lines. I was a bit surprised by the results because, even though I know that merge sort has complexity O(n log(n)) while quick sort is O(n^2), I have often read that on average quick sort should be as fast as merge sort. However, my results are the following. Up to 10000 strings, both algorithms perform equally well. For 10000 strings, both require about 0.007 seconds. For 100000 strings, merge sort is slightly faster with 0.095 s against 0.121 s. For 1000000 strings merge sort takes 1.287 s against 5.233 s of quick sort. For 5000000 strings merge sort takes 7.582 s against 118.240 s of quick sort. For 10000000 strings merge sort takes 16.305 s against 1202.918 s of quick sort. So my question is: are my results as expected, meaning that quick sort is comparable in speed to merge sort for small inputs but, as the size of the input data grows, the fact that its complexity is quadratic will become evident? Here is a sketch of what I did. In the merge sort implementation, the partitioning consists in calling merge sort recursively, i.e. merge_sort(lines, start, (start + end) / 2); merge_sort(lines, 1 + (start + end) / 2, end); Merging of the two sorted sub-array is performed by reading the data from the array lines and writing it to a global temporary array of pointers (this global array is allocate only once). After each merge the pointers are copied back to the original array. So the strings are stored once but I need twice as much memory for the pointers. For quick sort, the partition function chooses the last element of the array to sort as the pivot and scans the previous elements in one loop. After it has produced a partition of the type start ... {elements <= pivot} ... pivotIndex ... {elements > pivot} ... end it calls itself recursively: quick_sort(lines, start, pivotIndex - 1); quick_sort(lines, pivotIndex + 1, end); Note that this quick sort implementation sorts the array in-place and does not require additional memory, therefore it is more memory efficient than the merge sort implementation. So my question is: is there a better way to implement quick sort that is worthwhile trying out? If I improve the quick sort implementation and perform more tests on different data sets (computing the average of the running times on different data sets) can I expect a better performance of quick sort wrt merge sort? EDIT Thank you for your answers. My implementation is in-place and is based on the pseudo-code I have found on wikipedia in Section In-place version: function partition(array, 'left', 'right', 'pivotIndex') where I choose the last element in the range to be sorted as a pivot, i.e. pivotIndex := right. I have checked the code over and over again and it seems correct to me. In order to rule out the case that I am using the wrong implementation I have uploaded the source code on github (in case you would like to take a look at it). Your answers seem to suggest that I am using the wrong test data. I will look into it and try out different test data sets. I will report as soon as I have some results.

  Read the article

• Oracle's PeopleSoft Customer Advisory Boards Convene to Discuss Roadmap at Pleasanton Campus

  - by john.webb(at)oracle.com

  Last week we hosted all of the PeopleSoft CABs (Customer Advisory Boards) at our Pleasanton Development Center to review our detailed designs for future Feature Packs, PeopleSoft 9.2, and beyond. Over 150 customers from 79 companies attended representing a variety of industries, geographies, and company sizes. The PeopleSoft team relies heavily on this group to provide key input on our roadmap for applications as well as technology direction. A good product strategy is one part well thought out idea with many handfuls of customer validation, and very often our best ideas originate from these customer discussions. While the individual CABs have frequent interactions with our teams, it's always great to have all of them in one place and in person. Our attendance was up from last year which I attribute to two things: (1) More interest as a result of PeopleSoft 9.1 upgrade; (2) An improving economy allowing for more travel. Maybe we should index the second item meeting-to-meeting and use it as a market indicator - we'll see! We kicked off the day one session with an overview of the PeopleSoft Roadmap and I outlined our strategy around Feature Packs and PeopleSoft 9.2. Given the high adoption rate of PeopleSoft 9.1 (over 4x that of 9.0 given the same time lapse since the release date), there was a lot of interest around the 9.1 Feature Packs as a vehicle for continuous value. We provided examples of our 3 central design themes: Simplicity, Productivity, and lower TCO, including those already delivered via Feature Packs in 2010. A great example of this is the Company Directory feature in PeopleSoft HCM. The configuration capabilities and the new actionable links our CAB advised us on last Spring were made available to all customers late last year. We reviewed many more future Navigation changes that will fundamentally change the way users interact with PeopleSoft. Our old friend, the menu tree, is being relegated from center stage to a bit part, with new concepts like Activity Guides, Train Stops, Related Actions, Work Centers, Collaborative Workspaces, and Secure Enterprise Search bringing users what they need in a contextual, role based manner with fewer clicks. Paco Aubrejuan, our PeopleSoft GM, and Steve Miranda, the SVP for Fusion Applications, then discussed our plans around Oracle's Application Investment Strategy.  This included our continued investment in developing both PeopleSoft and Fusion as well as the co-existence strategy with new Fusion Apps integrating to PeopleSoft Apps. Should you want to view this presentation, a recording is available. Jeff Robbins, our lead PeopleTools Strategist, provided the roadmap for PeopleTools and discussed our continuing plan to deliver annual releases to further evolve the user experience. Numerous examples were highlighted with the Navigation techniques I mentioned previously. Jeff also provided a lot of food for thought around Lifecycle Management topics and how to remain current on releases with a  lower cost of ownership. Dennis Mesler, from Boise, was the guest speaker in this slot, who spoke about the new PeopleSoft Test Framework (PTF). Regression Testing is a key cost component when product updates are applied. This new tool (which is free to all PeopleSoft customers as part of PeopleTools 8.51) provides a meta data driven approach to recording and executing test scripts. Coupled with what our Usage Monitor enables, PTF provides our customers a powerful tool to lower costs and manage product updates more efficiently and at the time of their choosing. Beyond the general session, we broke out into the individual CABs: HCM, Financials, ESA/ALM, SRM, SCM, CRM, and PeopleTools/ Technology. A day and half of very engaging discussions around our plans took place for each product pillar. More about that to follow in future posts.      We capped the first day with a reception sponsored by our partners: InfoSys, SmartERP (represented by Doris Wong), and Grey Sparling  Solutions (represented by Chris Heller and Larry Grey). Great to see these old friends actively engaged in the very busy PeopleSoft ecosystem!   Jeff Robbins previews the roadmap for PeopleTools with the PeopleSoft CAB  

  Read the article

• SQL SERVER – Updating Data in A Columnstore Index

  - by pinaldave

  So far I have written two articles on Columnstore Indexes, and both of them got very interesting readership. In fact, just recently I got a query on my previous article on Columnstore Index. Read the following two articles to get familiar with the Columnstore Index. They will give you a reference to the question which was asked by a certain reader: SQL SERVER – Fundamentals of Columnstore Index SQL SERVER – How to Ignore Columnstore Index Usage in Query Here is the reader’s question: ” When I tried to update my table after creating the Columnstore index, it gives me an error. What should I do?” When the Columnstore index is created on the table, the table becomes Read-Only table and it does not let any insert/update/delete on the table. The basic understanding is that Columnstore Index will be created on the table that is very huge and holds lots of data. If a table is small enough, there is no need to create a Columnstore index. The regular index should just help it. The reason why Columnstore index was needed is because the table was so big that retrieving the data was taking a really, really long time. Now, updating such a huge table is always a challenge by itself. If the Columnstore Index is created on the table, and the table needs to be updated, you need to know that there are various ways to update it. The easiest way is to disable the Index and enable it. Consider the following code: USE AdventureWorks GO -- Create New Table CREATE TABLE [dbo].[MySalesOrderDetail]( [SalesOrderID] [int] NOT NULL, [SalesOrderDetailID] [int] NOT NULL, [CarrierTrackingNumber] [nvarchar](25) NULL, [OrderQty] [smallint] NOT NULL, [ProductID] [int] NOT NULL, [SpecialOfferID] [int] NOT NULL, [UnitPrice] [money] NOT NULL, [UnitPriceDiscount] [money] NOT NULL, [LineTotal] [numeric](38, 6) NOT NULL, [rowguid] [uniqueidentifier] NOT NULL, [ModifiedDate] [datetime] NOT NULL ) ON [PRIMARY] GO -- Create clustered index CREATE CLUSTERED INDEX [CL_MySalesOrderDetail] ON [dbo].[MySalesOrderDetail] ( [SalesOrderDetailID]) GO -- Create Sample Data Table -- WARNING: This Query may run upto 2-10 minutes based on your systems resources INSERT INTO [dbo].[MySalesOrderDetail] SELECT S1.* FROM Sales.SalesOrderDetail S1 GO 100 -- Create ColumnStore Index CREATE NONCLUSTERED COLUMNSTORE INDEX [IX_MySalesOrderDetail_ColumnStore] ON [MySalesOrderDetail] (UnitPrice, OrderQty, ProductID) GO -- Attempt to Update the table UPDATE [dbo].[MySalesOrderDetail] SET OrderQty = OrderQty +1 WHERE [SalesOrderID] = 43659 GO /* It will throw following error Msg 35330, Level 15, State 1, Line 2 UPDATE statement failed because data cannot be updated in a table with a columnstore index. Consider disabling the columnstore index before issuing the UPDATE statement, then rebuilding the columnstore index after UPDATE is complete. */ A similar error also shows up for Insert/Delete function. Here is the workaround. Disable the Columnstore Index and performance update, enable the Columnstore Index: -- Disable the Columnstore Index ALTER INDEX [IX_MySalesOrderDetail_ColumnStore] ON [dbo].[MySalesOrderDetail] DISABLE GO -- Attempt to Update the table UPDATE [dbo].[MySalesOrderDetail] SET OrderQty = OrderQty +1 WHERE [SalesOrderID] = 43659 GO -- Rebuild the Columnstore Index ALTER INDEX [IX_MySalesOrderDetail_ColumnStore] ON [dbo].[MySalesOrderDetail] REBUILD GO This time it will not throw an error while the update of the table goes successfully. Let us do a cleanup of our tables using this code: -- Cleanup DROP INDEX [IX_MySalesOrderDetail_ColumnStore] ON [dbo].[MySalesOrderDetail] GO TRUNCATE TABLE dbo.MySalesOrderDetail GO DROP TABLE dbo.MySalesOrderDetail GO In the next post we will see how we can use Partition to update the Columnstore Index. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Index, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• Lies, damned lies, and statistics Part 2

  - by Maria Colgan

  There was huge interest in our OOW session last year on Managing Optimizer Statistics. It seems statistics and the maintenance of them continues to baffle people. In order to help dispel the mysteries surround statistics management we have created a two part white paper series on Optimizer statistics.  Part one of this series was released in November last years and describes in detail, with worked examples, the different concepts of Optimizer statistics. Today we have published part two of the series, which focuses on the best practices for gathering statistics, and examines specific use cases including, the fears that surround histograms and statistics management of volatile tables like Global Temporary Tables. Here is a quick look at the Introduction and the start of the paper. You can find the full paper here. Happy Reading! Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:12.0pt; font-family:"Times New Roman","serif";} Introduction The Oracle Optimizer examines all of the possible plans for a SQL statement and picks the one with the lowest cost, where cost represents the estimated resource usage for a given plan. In order for the Optimizer to accurately determine the cost for an execution plan it must have information about all of the objects (table and indexes) accessed in the SQL statement as well as information about the system on which the SQL statement will be run. This necessary information is commonly referred to as Optimizer statistics. Understanding and managing Optimizer statistics is key to optimal SQL execution. Knowing when and how to gather statistics in a timely manner is critical to maintaining acceptable performance. This whitepaper is the second of a two part series on Optimizer statistics. The first part of this series, Understanding Optimizer Statistics, focuses on the concepts of statistics and will be referenced several times in this paper as a source of additional information. This paper will discuss in detail, when and how to gather statistics for the most common scenarios seen in an Oracle Database. The topics are · How to gather statistics · When to gather statistics · Improving the efficiency of gathering statistics · When not to gather statistics · Gathering other types of statistics How to gather statistics The preferred method for gathering statistics in Oracle is to use the supplied automatic statistics-gathering job. Automatic statistics gathering job The job collects statistics for all database objects, which are missing statistics or have stale statistics by running an Oracle AutoTask task during a predefined maintenance window. Oracle internally prioritizes the database objects that require statistics, so that those objects, which most need updated statistics, are processed first. The automatic statistics-gathering job uses the DBMS_STATS.GATHER_DATABASE_STATS_JOB_PROC procedure, which uses the same default parameter values as the other DBMS_STATS.GATHER_*_STATS procedures. The defaults are sufficient in most cases. However, it is occasionally necessary to change the default value of one of the statistics gathering parameters, which can be accomplished by using the DBMS_STATS.SET_*_PREF procedures. Parameter values should be changed at the smallest scope possible, ideally on a per-object bases. You can find the full paper here. Happy Reading! +Maria Colgan

  Read the article

• Increasing touch surface (#wp7dev)

  - by Laurent Bugnion

  When you design for Windows Phone 7 (or for any touch device, for that matter, and most especially small screens), you need to be very careful to give enough surface to your users’ fingers. It is easy to miss a touch on such small screens, and that can be horrifyingly frustrating. This is especially true when people are on the move, and trying to hit the control while walking and holding their device in one hand, or when the device is mounted in a car and vibrating with the engine. In my experience, a touch surface should be ideally minimum 60x60 pixels to be easy to activate on the Windows Phone 7 screen (which is, as we know, 800 pixels x 480 pixels). Ideally, I try to make my touch surfaces 80x80 pixels minimum. This causes a few design challenges of course. Using transparent backgrounds However, one thing is helping us tremendously: some surfaces can be made transparent, and yet react to touch. The secret is the following: If you have a panel that has a Null background (i.e. the Background is not set at all), then the empty surface does not react to touch. If however the Background is set to the Transparent color (or any color where the Alpha channel is set to 0), then it will react to touch. Setting a transparent background is easy. For example: <Grid Background="#00000000"> </Grid> or <Grid Background="Transparent"> </Grid> In C#: var grid = new Grid { Background = new SolidColorBrush( Colors.Transparent) }; Using negative margins Having a transparent background reactive to touch is a good start, but in addition, you must make sure that the surface is big enough for my clumsy fingers. One way to achieve that is to increase the transparent, touch-reactive surface, and reposition the element using negative margins. For example, consider the following UI. I changed the transparent background of the HyperlinkButton to Red, in order to visualize the touch surface. In this figure, the Settings HyperlinkButton is 105 pixels x 31 pixels. This is wide enough, but really small in height and easy to miss. To improve this, we can use negative margins, for instance: <HyperlinkButton Content="Settings" HorizontalAlignment="Right" VerticalAlignment="Bottom" Height="60" Margin="0,0,0,-15" /> Notice the usage of negative bottom margin to bring the HyperlinkButton back at the bottom of the main Grid’s first row, where it belongs. And the result is: Notice how the touch surface is much bigger than before. This makes the HyperlinkButton easier to reach, and improves the user experience. With the background set back to normal, the UI looks exactly the same, as it should: In summary: Remember to maximize the touch surface for your controls. Plan your design in consequence by reserving enough room around each control to allow their hit surface to be expanded as shown in this article. Do not cram too many controls in one page. If REALLY needed, use an additional page (or even better: use a Pivot control with multiple pivot items) for the controls that don’t fit on the first one. This should ensure a smoother user experience and improved touch behavior. Happy coding! Laurent   Laurent Bugnion (GalaSoft) Subscribe | Twitter | Facebook | Flickr | LinkedIn

  Read the article

• Silverlight Cream for November 13, 2011 -- #1166

  - by Dave Campbell

  In this Issue: Pontus Wittenmark, Jeff Blankenburg(-2-), Colin Eberhardt, Charles Petzold, Dhananjay Kumar, Igor, Beth Massi, Kunal Chowdhury(-2-), Shawn Wildermuth, XAMLNinja, and Peter Kuhn(-2-). Above the Fold: Silverlight: "Silverlight Page Navigation Framework - Learn about UriMapper" Kunal Chowdhury WP7: "31 Days of Mango" Jeff Blankenburg WinRT/Metro/W8: "An Introduction to Semantic Zoom in Windows 8 Metro" Colin Eberhardt LightSwitch: "Common Validation Rules in LightSwitch Business Applications" Beth Massi Shoutouts: Michael Palermo's latest Desert Mountain Developers is up Michael Washington's latest Visual Studio #LightSwitch Daily is up From SilverlightCream.com: 10 tips about porting Silverlight apps to WinRT/Metro style apps (Part 1) Pontus Wittenmark spent some time porting his Silverlight game to WinRT and says it was easier than expected. He has posted 10 tips for porting... and promises more 31 Days of Mango Looks like Jeff Blankenburg started another 31 days series... this one on Mango dev... and looks like I'm late to the party, but that's ok, gives me more stuff to blog about... this time you can get the posts by email, and he has a hashtag for discussion too 31 Days of Mango | Day #1: The New Windows Phone Emulator Tools Day 1 of Jeff Blankenburg's journey is this post on what's new in the emulator tools. An Introduction to Semantic Zoom in Windows 8 Metro This is Colin Eberhardt's latest ... getting familiar with semantic zoom oin Metro by creating a WP7-stylke jumplist experience.... check out the video on his blogpost for a better idea of what he's up to .NET Streams and Windows 8 IStreams In his first real post on his new series writing an EPUB viewer for W8, Charles Petzold described using IInputStream to get the contents of a disk file... and source for the project in progress Video on How to work with Page Navigation and Back Button in Windows Phone 7 Dhananjay Kumar has a video tutorial up on Page Navigation and Back Button usage in WP7 Screen capture to media library instead of isolated storage Igor discusses a class that lets you save screen captures for use in your application and also saving them to the media library on the phone Common Validation Rules in LightSwitch Business Applications Beth Massi's latest is this LightSwitch post on Validation rules... showing how to define declarative rules and also write custom validation code. Silverlight Page Navigation Framework - Learn about UriMapper Kunal Chowdhury continues his Page Navigation discussion with this post on the UriMapper, and how to hide the actual URL of the page you're navigating to How to use PlaySoundAction Behavior in WP7 Application? Kunal Chowdhury also has this post up on using the PlaySoundAction Behavior in WP7 ... nice tutorial on using Blend to get the job done What Win8 Should Learn from Windows Phone After spending time with Windows 8, Shawn Wildermuth has this post up about features from WP7 that should be brought over to Windows 8, and finishes with features that WP8 (?) could learn from Win8 too WP7Contrib – FindaPad and the fastest list in the west XAMLNinja discusses the WP7 App FindaPad which spawned the creation of WP7Contrib and uses the app to describe some nuances that may not be readily obvious. Windows Phone 7: The kind of bug you don't want to discover Peter Kuhn discusses a problem he came across while programming WP7, interestingly enough, only in the emulator, and has to do with a Uint64 cast. He does offer a workaround. Announcing: Your Last About Dialog (YLAD) Peter Kuhn also has this post up that's a take-off on a post by Jeff Wilcox about a generic About Dialog. Peter has some great additions.. and he's right... it may be your last About Dialog... get it via NuGet, too! Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• Surface V2.0

  - by Dennis Vroegop

  It’s been quiet around here. And the reason for that is that it’s been quiet around Surface for a while. Now, a lot of people assume that when a product team isn’t making too much noise that must mean they stopped working on their product. Remember the PDC keynote in 2010? Just because they didn’t mention WPF there a lot of people had the idea that WPF was dead and abandoned for Silverlight. Of course, this couldn’t be farther from the truth. The same applies to Surface. While we didn’t hear much from the team in Redmond they were busy putting together the next version of the platform. And at the CES in January the world saw what they have been up to all along: Surface V2.0 as it’s commonly known. Of course, the product is still in development. It’s not here yet, we can’t buy one yet. However, more and more information comes available and I think this is a good time to share with you what it’s all about! The biggest change from an organizational point of view is that Microsoft decided to stop producing the hardware themselves. Instead, they have formed a partnership with Samsung who will manufacture the devices. This means that you as a buyer get the benefits of a large, worldwide supplier with all the services they can offer. Not that Microsoft didn’t do that before but since Surface wasn’t a ‘big’ product it was sometimes hard to get to the right people. The new device is officially called the “Samsung SUR 40 for Microsoft Surface” which is quite a mouthful. The software that runs the device is of course still coming from Microsoft. Let’s dive into the technical specs (note: all of this is preliminary, it’s still in the Alpha phase!): Audio out HDMI / StereoRCA / SPDIF / 2 times 3.5mm audio out jack Brightness 300 CD/m2 Communications 1GB Ethernet/802.11/Bluetooth Contrast Ratio 1:1000 CPU AMD Athlon X2 245e 2.9Ghz Dual Core Display Resolution Full HD 1080p 1920x1080 / 16:9 aspect ratio GPU AMD Radeon HD 6750 1GB GDDRS HDD 320 GB / 7200 RPM HDMI In / HDMI out Yes I/O Ports 4 USB, SD Card reader Operation System Embedded Windows 7 Professional 64 bits Panel Size 40” diagonal Protection Glass Gorilla Glass RAM 4 GB DD3 Weight / with standard legs 70.0 Kg / 154 lbs Weight / standalone 39.5 Kg / 87 lbs Height (without legs) 4 inch Contact points recognized > 50 Cool Factor Extremely   Ok, the last point is not official, but I do think it needs to be there. Let’s talk software. As noted, it runs Windows 7 Professional 64 bit, which means you can run Visual Studio 2010 on it. The software is going to be developed in WPF4.0 with the additional Surface SDK 2.0. It will contain all the things you’ve seen before plus some extra’s. They have taken some steps to align it more with the Surface Toolkit which you can download today, so if you do things right your software should be portable between a WPF4.0 Windows 7 Multi-touch app and the Surface v2 environment. It still uses infrared to detect contacts, so in that respect nothing much has changed conceptually. We still can differentiate between a finger, a tag or a blob. Of course, since the new platform has a much higher resolution (compared to the 1024x768 of the first version) you might need to look at your code again. I’ve seen a lot of applications on Surface that assume the old resolution and moving that to V2 is going to be some work. To be honest: as I am under NDA I cannot disclose much about the new software besides what I have told you here, but trust me: it’s going to blow people away. Now, the biggest question for me is: when can I get one? Until we can, have a look here: Tags van Technorati: surface,samsung,WPF

  Read the article

• Why I&rsquo;m Getting an iPad

  - by andrewbrust

  I have never purchased an Apple product in my life.  That’s a “true fact.”  And, for that matter, the last Apple product I really wanted was an Apple IIe, back in the 1980s.  I couldn’t afford it though (I was in high school), so I got a Commodore 64 instead…it had the same microprocessor, after all.  If the iPhone were on Verizon, I probably would have picked one up in December, when I got my Droid.  And if the iPod Touch worked with my Napster subscription (which of course it does not, but my Sonos does) I might have picked on of those instead. That’s three strikes, but Apple’s not out.  I’ve decided I want the iPad.  Why?  Well, to start with, my birthday is March 31st…the iPad comes out on April 3rd, and my wife wanted to know what to get me.  Also, my house is a 7-minute walk from the Apple Store on West 14th Street in Manhattan.  This makes it easy to get my pre-ordered device on launch day, and get home quickly with it.  Oh, and I agreed to write an article for Redmond Magazine, the fee for which will pay for the device…that way the birthday present doesn’t have to be an extravagant expense.  Plus, I’m a contrarian, so I want to buy the one device from Apple that the fanboys have actually panned. Think those are bad reasons? How about this: I want to experience iPhone and iPad development and, although my app will probably never hit the App Store and run on the actual device, I still think owning one will help me develop something better.  i want to see if the slate form factor has good business usage scenarios.  I want to see if Business Intelligence technology on a device like this can work.  Imagine a dashboard on this thing. And, for the consumer experience, I really want a touch device on which I can surf the Web while I’m in the kitchen, or on the couch.  I don’t want the small form factor of my phone, I don’t want to use my TV, and I don’t want a keyboard that will get dirty or in my way. I don’t want to watch movies on it (my TV is good for that), so I don’t care that the iPad has a 4:3 screen.  I don’t want to read books on it, so I don’t care that the display is backlit LCD, rather than eInk. But really what I want is to understand, first hand, why people have such brand loyalty to Apple.  I know the big reasons; I’m not detached from society.  But I want to know the subtle points of what Apple does really well, and also what they do poorly.  And I’d like to know, once and for all, if Microsoft can beat Apple, if Microsoft can think the right way to beat Apple and if Microsoft should  even try to beat Apple. I expect to share my thoughts on these questions, as they develop.

  Read the article

• Ubuntu 11.04 and 10.04 hang with black screen while installing from USB disk

  - by Bill

  I've been trying to install Ubuntu 11.04 from a USB flash stick and each time I try to boot from the USB key one of two things happen: A) The screen that asks you what you would like to do (e.g. run Ubuntu from the USB key or install it) shows up and the countdown to the default option starts to count down but as soon as I either touch the keyboard (sometimes I press enter or the arrow keys to select an option) or the countdown gets to zero the screen just locks up and nothing happens no matter how long I wait. B) When I boot from the USB key the screen will flicker for a second and then go black with a flashing white underscore at the top left corner of the screen. Again it doesn't matter how long I wait, nothing happens and pressing keys doesn't do a thing. The very first time I tried to install it I got a terminal-like screen that said something about a directory called 'casper' having an error of some sort. I have tried installing from USB using both 11.04 and 10.10. I'm about to try 10.04. I have read tons of forum posts about this but so far I haven't seen anything in the solutions that apply to me. My intention is to dual boot Windows 7 and Ubuntu. I must keep Windows as I am required to use Visual Studio for one of my college courses. Right now I'm using Wubi but I really want a full install. I can't use LVPM because it doesn't work with the version of Wubi I used. So now I'm thinking my best bet is to try to get a clean install working. I'd also convert Wubi to a full install too but there's no solution as far as I've read. So could someone tell me a reason why this is happening or if there's something I can do to get around the problem? I'm using a Gateway LT2802u netbook with and Intel Atom N455 processor, 1GB RAM, Intel Graphics Media Accelerator 3150 graphics card, and a 250GB HDD. I don't have anything on my current Wubi install that I can't replace so keep in mind when answering that I don't care if I lose my current settings and files from Wubi. Thanks everyone! UPDATE I just answered my own question so in case anyone else is having this same problem using similar hardware, do the following: When I first tried installing 11.04 I used the recommended universal installer tool to create the USB live/installation disk. That caused the original problem. Note that I had already downloaded the 11.04 ISO and did not use the included downloader from the USB creator. After that failed I used the same USB creator but had it download 10.10 for me. It also failed with the same issue. I repeated this process with unetbootin as well for both versions. Finally, I downloaded the Ubuntu 10.04 ISO and used the recommended USB creator once again. There was an error while creating the USB live install so I reformatted the USB key as FAT32 and tried again. It created the USB key. I then booted from the USB flash drive and selected "Install Ubuntu" (exact wording was different). It worked! It took me through the process that you see shown in pictures on the Ubuntu website. I let it create the appropriate partitions for me and it simply worked. I did get a few errors while the system tried to restart after it installed. It hung on a terminal-like screen but I pressed ENTER and it restarted. I booted into Windows 7, it checked the disks as it sensed that I messed with a partition, then it booted into Windows normally. Now I'm going to uninstall Wubi and update my new full install of Ubuntu! I'm excited to get the benefits of a full install now. So in the end, hopefully someone can learn from what I did.

  Read the article

• Thoughts on Thoughts on TDD

  Brian Harry wrote a post entitled Thoughts on TDD that I thought I was going to let lie, but I find that I need to write a response. I find myself in agreement with Brian on many points in the post, but I disagree with his conclusion. Not surprisingly, I agree with the things that he likes about TDD. Focusing on the usage rather than the implementation is really important, and this is important whether you use TDD or not. And YAGNI was a big theme in my Seven Deadly Sins of Programming series. Now, on to what he doesnt like. He says that he finds it inefficient to have tests that he has to change every time he refactors. Here is where we part company. If you are having to do a lot of test rewriting (say, more than a couple of minutes work to get back to green) *often* when you are refactoring your code, I submit that either you are testing things that you dont need to test (internal details rather than external implementation), your code perhaps isnt as decoupled as it could be, or maybe you need a visit to refactorers anonymous. I also like to refactor like crazy, but as we all know, the huge downside of refactoring is that we often break things. Important things. Subtle things. Which makes refactoring risky. *Unless* we have a set of tests that have great coverage. And TDD (or Example-based Design, which I prefer as a term) gives those to us. Now, I dont know what sort of coverage Brian gets with the unit tests that he writes, but I do know that for the majority of the developers Ive worked with and I count myself in that bucket the coverage of unit tests written afterwards is considerably inferior to the coverage of unit tests that come from TDD. For me, it all comes down to the answer to the following question: How do you ensure that your code works now and will continue to work in the future? Im willing to put up with a little efficiency on the front side to get that benefit later. Its not the writing of the code thats the expensive part, its everything else that comes after. I dont think that stepping through test cases in the debugger gets you what you want. You can verify what the current behavior is, sure, and do it fairly cheaply, but you dont help the guy in the future who doesnt know what conditions were important if he has to change your code. His second part that he doesnt like backing into an architecture (go read to see what he means). Ive certainly had to work with code that was like this before, and its a nightmare the code that nobody wants to touch. But thats not at all the kind of code that you get with TDD, because if youre doing it right youre doing the write a failing tests, make it pass, refactor approach. Now, you may miss some useful refactorings and generalizations for this, but if you do, you can refactor later because you have the tests that make it safe to do so, and your code tends to be easy to refactor because the same things that make code easy to write unit tests for make it easy to refactor. I also think Brian is missing an important point. We arent all as smart as he is. Im reminded a bit of the lesson of Intentional Programming, Charles Simonyis paradigm for making programming easier. I played around with Intentional Programming when it was young, and came to the conclusion that it was a pretty good thing if you were as smart as Simonyi is, but it was pretty much a disaster if you were an average developer. In this case, TDD gives you a way to work your way into a good, flexible, and functional architecture when you dont have somebody of Brians talents to help you out. And thats a good thing.Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

< Previous Page | 336 337 338 339 340 341 342 343 344 345 346 347  | Next Page >