Search Results

Search found 25973 results on 1039 pages for 'visual c express 2010'.

Page 340/1039 | < Previous Page | 336 337 338 339 340 341 342 343 344 345 346 347  | Next Page >

• 5v PCI to PCI-X or PCIe adapter?

  - by SiegeX

  We unfortunately have a very expensive ($10K) full-length 5 volt PCI card that we would like to use in the same system as another expensive PCI-X card. As luck would have it, it seems that PCI-X is not backwards compatible with 5v PCI cards. It would be a real shame to have to order a whole new server just to accommodate these two cards together. Does there exist any internal converter/adapter that will allow one to place a full-length 5v PCI card into either a PCI-X or PCIe slot? I've found an external expansion box that suits our needs but it's 1) External and 2) $1100. The only internal adapters I've been able to find go from Low-profile PCI - PCIe; nothing that seems to support full-height, full-length PCI cards.

  Read the article

• How do you test if a PCI slot is working - motherboard diagnostic software?

  - by Adam

  I suspect that my motherboard is bad, and that my PCI-E slot is not working. I have a Gigabyte motherboard that had a Hauppage 2250 working fine in the PCI-E slot for many months. However - recently - would not get TV channels that I used to get --- until finally Media center cant detect any channels at all. Got a new tuner card (ATI 350 card) - cant detect any channels. The cable signal is good - I have it connected directly to a TV - all channels come in clear. SO that is why I suspect a motherboard problem. Are there any motherboard diagnostic scanner utilities that can verify I need a new motherboard

  Read the article

• SATA 3 PCIe Controller working with decreased performance (slower than SATA 2)

  - by V M

  After reading this question about maxing out an SSD I decided to do so myself. My mobo only supports SATA 2 and has two PCIe 2.0 x1 connectors (which promiss up to 500 mb/s). So after some searching I decided to go with this controller from amazon. My Samsung magician benchmark before upgrade (running SATA 2): Now after installing the controller all of the benchmark scores are lower (even though the Samsung Magician app confirms its connected to a SATA 3 port): What can I do to remedy this? Any help is appreciated.

  Read the article

• Linux PCIE Physical Bus Address

  - by Without me Its just Aweso

  I am working on designing a custom PCIexpress card. I am trying to write a kernel module that will DMA my custom card. Right now when i plug the card into linux no valid PCI device shows up (meaning I probably have a error on my end, i know) however, If I halt the system at startup in the bootloader (uboot) I am able to directly access the card as I know in uboot the physical memory address that is mapped to my device. Is there a way I can access the card in a simliar fashion in linux? Thanks, Stephanie

  Read the article

• Outlook 2010 + Move IMAP PST file = Outlook data file cannot be accessed.

  - by GWB

  I set up a new IMAP account in Outlook 2010. It works but creates IMAP PST file in C:\Users\User\AppData\Local\Microsoft\Outlook. I want the file on my data drive in D:\Users\User\Documents\Outlook Files (the same folder where outlook automatically creates the local Outlook PST. I followed the instructions here to move the IMAP PST. Testing the account (send/receive) works fine, but if I try to manually send an email I get error 0x8004010F Outlook data file cannot be accessed. I've tried repairing the PST using SCANPST (it always finds errors), and deleting and recreating the account but I get the same error. If I move the PST file back, it works again, but this is not ideal. Note: I don't think this is a duplicate of this question as the cause is different and the solution does not help.

  Read the article

• cannot connect to <server_name>\sqlexpress

  - by Jackson Sunuwar

  I have tried disabling firing wall and checked sqlbrowser is started but for some reason I cannnot connect to my datbase... called server_name\sqlexpress.. I have a virtual machine and a full scale MS SQL Server 2008 R2 running on it... and I have several other vm running sqlexpress. they run fine and I can connect to them using sqlexpress... but when i try to access from sqlserver... I get this error. A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1) Digging deep into the error, I found this Error Number: -1 Severity: 20 State: 0 and finally this... Program Location: at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject) at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup) at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) at System.Data.SqlClient.SqlConnection.Open() at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ValidateConnection(UIConnectionInfo ci, IServerType server) at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser() Firewall is turned off on the VM that's running mssqlserver... I turned of firewall on one of the vm that's running the sqlexpress but I still get the error... can someone please help... thank you

  Read the article

• Has anyone managed to install Office Webapps on SharePoint 2010, on Windows 7 ?

  - by Nick Haslam

  I've installed SharePoint 2010 as a development environment on my Windows 7 x64 environment (notes here) and would like to install Office Web Apps onto it also. However, when trying to install (following this link), I get an error saying that Web roles aren't installed. The error message in the log file is: Start C:\Windows\system32\ServerManagerCmd.exe -whatif -inputpath C:\Users\nickh\AppData\Local\Temp\PRE1.tmp.XML Error: Failed to start process for file: C:\Windows\system32\ServerManagerCmd.exe arguments: -whatif -inputpath C:\Users\nickh\AppData\Local\Temp\PRE1.tmp.XML ErrorCode: 2(0x2). Which is effectively saying that ServerManagerCmd is not found. It isn't on my machine as it is deprecated and replaced by Powershell functions, but is on Server 2008 R2. I've tried copying that over and it just fails to run. Is there a way to get Office WebApps installed on Win7 ? Is there a way to get a working version of ServerManagerCmd.exe on a Windows 7 x64 environment ? Many thanks

  Read the article

• Loading guest OS's (Windows) localhost through my host's (Mountain Lion) browsers

  - by Jonah Goldstein

  For work, I have to develop in Visual Studio, which I run via VMware's fusion 5. I really want to test via my mac's native browsers for a multitude of reasons. that is, view the IIs web stuffs that my windows VM should expose, in my mac's own native Firefox, Chrome... etc. if i could expose a pretty url, that would be even better, but i would certainly settle for an ugly IP :) I got a decent number of views but no response when I asked in VMware's own boards. Everyone seems to want to go the other direction (developing in sublimetext/textmate serving up through MAMP and exposing it to windows browsers to test) and there seems to be tried a true solutions for this. unfortunately (or fortunately depending on your preference) my startup is pretty entrenched in the visual studio development tools. I'm really hoping that someone knows the answer to this. Thanks :)

  Read the article

• Z77 Motherboard with i7-2600K cpu, what will not work?

  - by Mxx

  I'm building a new system. So far I think I narrowed it down to Gigabyte GA-Z77X-UD5H (Z77 Ivy Bridge chipset) motherboard. I was planning to get i5-3570K(Ivy Bridge) cpu, but now I can get i7-2600K(Sandy Bridge) cpu for free. It is my understanding that Ivy Bridge platform brings support for PCIe3 and (additional?)USB3 ports. If I were to put SB cpu into IB motherboard, what is going to happen to PCIe3 slot? Will it not work at all or downgrade to PCIe2? Also, what is the situation with USB3 ports?

  Read the article

• Expresscard Not Detected in PCI-E Adapter

  - by maxpower47

  I'm trying to put an expresscard TV tuner (Avermedia HC82) into my HTPC using this expresscard to PCI-E adapter. I've verified that the tuner works fine in my laptop. The motherboard is a Biostar TF7050-M2. When I install it and turn it on, the light on the back of the adapter comes on fine (there are two indicator lights on the back to show if it is using PCI-E or USB communication, USB communication goes through a USB cable connected between the card and a header on the motherboard) showing that it is working in PCI-E mode. However, the device is never detected in Windows 7 Professional x64. The auto detect never happens, it doesn't show up in the device manager, and I can have it rescan for new hardware and nothing is found. I tested the whole setup (tuner + adapter) in another PC (also using Win 7 Pro x64) and it worked fine. I also tried: Plugging the adapter in to the PCI-E x16 slot on the motherboard (I verified first that the x16 slot worked by installing a video card in it) Booting into safe mode and rescanning Updating the chipset drivers Installing the tuner drivers first Using a different USB cable, plugged in to one of the known good ports on the back of the board Trying it without the USB cable plugged in Removing the other PCI cards that were installed on the board Looking through the BIOS for any setting that might be disabling it somehow to no avail. I'm at a loss for what else to try. I really don't want to RMA it (the shipping back to newegg will be almost as much as it cost to buy in the first place. Any ideas?

  Read the article

• MDaemon vs Exchange (2007-2010). Which way should we choose ?

  - by Deniz

  We are at the verge of a mail server decision. We do currently use 2 mail servers : MDaemon 10 and Exchange 2003. We are planning to use a company and customer wide one point solution. Our main candidates are MDaemon 11 and Exchange 2007 or 2010. We would like to learn other users experiences on those solutions. The server-side experiences, the user-side experiences , TCO, support options etc. And if there where other solutions (maybe MDaemon 11 + Exchange or anything else) you could suggest ?

  Read the article

• Good Motherboard for 16/16/4 configurations?

  - by Burnzy

  I am looking for a board that supports 16/16/4 configurations (lga 1366 of course). For 2 graphic cards in SLI (250gts twin frozr) and a revodrive(not bought yet -20-227-578--Product"http://www.newegg.ca/Product/Product.aspx?Item=N82E16820227578&cm_re=revodrive--20-227-578--Product ). This boards seems alright for my needs (http://www.newegg.ca/Product/Product.aspx?Item=N82E16813131665&cm_re=sabertooth--13-131-665--Product), but I am afraid it's going to be too tight for both of my graphic cards. Do anyone know any other board that would do the job? Preferably asus motherboards, as they are the most stable boards I know Thanks for your help!

  Read the article

• Can I fully disable my PCIe Video/Graphics Card per BIOS/Software?

  - by Jook

  Because of a quite noisy fan of my HD6700 I was wondering, if I could fully disable my video card through BIOS or even some Software/Windows. Switching to Intel I7 2600 internal video helped already with the noise, but it would be great to have the HD6700 only build in, but not activated/powered. So that the fan could stay compleatly off. Of course, I could just remove the video card, but I would like to avoid that. Is there any way? My Mainboard is an ASUS P8H67-M Pro, with Intel I7 2600 and ATI HD6500

  Read the article

• so i installed sql server now how do i connect to it?

  - by letseatlunch

  SO i have a server running windows server 2008 r2 and i just installed Microsoft sql server 2008. I used the manager thing to create the database and the tables, etc and now i want to connect to it via my visual studio which is on a different machine. so how do i do that? do i need to "turn on" the sql server, do i need to do port forwarding? do i have to modify the iis or change those settings? is there a good article someone can me point me to? just to further help you help me, i understand how to connect to a datasource in visual studio my problem is more with the sql server and understanding how to properly set it up once installed. Sorry for the noob question, i got it all installed and i know how to use it once its all going i just don't know the in-between. thanks in advance dave

  Read the article

• Is anyone familiar with this message in Kapersky Internet Security 2010?

  - by tintincutes

  Hi I just started my computer up & opened a website for my checking my mail, when I opened a Kaspersky Internet Security 2010 window popped up. C:\Documents and Settings\username\Local Settings\Application Data\Mozilla\Firefox\Profiles\rse47wp8.default\Cache\C\79\D5CC9d01 Does anyone is familiar with this? I checked the path and this path doesn't exist. I couldn't remember that I have a file of D5CC9d01 once. Can somebody please tell me if this is a virus or not? Thanks

  Read the article

• Second monitor not detected

  - by Gabriel

  Hi I have two VGA monitors, my GPU is ATI PowerColor 6850 which has two DVI slots, I use adapters for both VGA monitors. If I connect any the two monitors in the first slot it will work right away (along the plugin confirmation sound). And if I connect any of both monitors to the second slot I won't get anything, nor a signal or confirmation sound. I also tried auto detecting via Catalyst Control Center and Windows Desktop Resolution. I have the latest drivers installed. EDIT: I found this on the Spec Description: Display Connectors DL-DVI-I/SL-DVI-D And in NewEgg: 2 x DVI (1 Single Link, 1 Dual Link) Could this have anything to do with my issue?

  Read the article

• PCIe network card deactivate DVI output (but NOT VGA output) on Shuttle SG41J1+

  - by wazoox

  It's all in the title :) Inserting a network card (or any other PCIe card, RAID controller, SAS, etc ) in the PCIe 16x slot of the Shuttle SG41J1 deactivate the DVI output. The VGA output still works fine. Shuttle support says that it's a chipset limitation (G41 + ICH7), but that doesn't make sense to me : the VGA and DVI share the same hardware but the D/A converter stage. Does anyone think that there may be some solution to this conundrum? Can a future BIOS update solve the problem?

  Read the article

• Multiple .bkf files created in Backupexec 12.5 or 2010 related to heavy I/O?

  - by syuusuke

  Hey everyone, I was wondering if anyone who has used backupexec 12.5 or 2010 have ever experienced multiple .bkf files created for a single job. To describe what I mean by multiple files, the .bkf are being created with random file sizes under 2GB even though I've assigned the setting to chop the file after 10GB size. Some jobs will create 20x .bkf files in 1 job with file chunks ranging from 50MB to 800MB sizes. Is this is a sign of heavy I/O issues? Bandwidth limitations? I'm not sure, I'm here to seek some advices and suggestions. I've setup another backup server with the same exact settings and they seem to create a new .bkf file when 10GB limit has been reached. Although I am backing up different machines but I know my settings are an exact match to the problematic or atleast I think it's a problem.

  Read the article

• 5 x 3GB drives and 4 x 1500GB drive best raid setup?

  - by Zen_Silence

  Hello, I am building a file server my plan is the have the Operating system on one raid partition and the data storage on another partition. I currently have 5 x 3GB IDE drives that i would like to put the operating system on theses drives are old but that doesnt matter to me at the moment i have a ton of them so for this raid partition i would probably want to be able to pull out dead a drive and rebuild the array. My file partition is going to consist of 4 x 1.5TB SATA drives I would like the maximum storage with some redundancy. Any suggestions to which Raid level i should use would be greatly appreciated and if you could also suggest a PCI or PCI-e raid controller to handle theses arrays. Thanks in Advance, Zen_Silence

  Read the article

• How to make the Microsoft Word 2010 web install version completely download itself?

  - by Paperflyer

  I installed Microsoft Word 2010 using the handy web installation feature. The way this works is that Word installs a bare minimum of functionality and any time it needs a feature that has not been downloaded yet, it will download it in-place just as needed. The thing is, this is stalling Word every few minutes. Every few minutes, Word takes a small nap while it tries to find some obscure feature somewhere. This is really annoying. Is there a way to just tell the thing to completely download itself? This was a nice functionality for the trial but it is extremely annoying in actual use.

  Read the article

• Does TFS 2010 lock a project collection when it's being cloned?

  - by Hirvox

  We're planning to migrate a project collection currently hosted on TFS 2010 to TFS 2012. We want to keep the current installation running while resolving any issues that might arise, so we need to copy the current project collection to the new server. However, TFS doesn't allow us to attach a restored database backup directly. The database first must be detached from the original TFS installation. We can get around that limitation by cloning the project collection and detaching the clone, but we're not sure whether that would also impact the original project collection. Does TFS lock the original project collection while it's being cloned?

  Read the article

• How to set up multiple video cards in Windows XP

  - by Swish

  All I am trying to do is run a three monitor setup, two widescreens on the good card at high res and a third smaller monitor at 1024x768 that I watch continuously updating info in. I have a Dell Vostro 200 with an HIS Radeon HD 4670 video card in the PCI-e slot. I need an additional video card that will work in an available PCI slot. I Had a Nvidia GeForce 5200 that was installed but due to what I'm assuming was a compatible driver issue (because it was Nvidia not ATI) it wouldn't run at more than 640x480 4bit color when installed simultaneously with the HIS card. Previously I used the Nvidia with the onboard Intel video to run a third monitor, but now that the HSI uses PCI-e the onboard has to be disabled. I tried a Radeon 9200 PCI card that I found (microsoft made I think) with it and only that or the HIS card could be enabled at the same time. When both were in the HIS card said "The device cannot start". SO, based on the fact that I got the Nvidia to work (although very poorly) with the new HIS Radeon HD 4670 PCI-e I know it's possible, just don't know what type of card I need to use. Any ideas?

  Read the article

• How can I change the font color of the VS2012 Source Control Explorer window?

  - by RM.

  I am using Visual Stuido 2012 Integrated Shell with Team Explorer. I would like to change the default font color of the mapped and not mapped folders in the Source Control Explorer (in the treeview). I tried the Visual Studio Color Theme editor, but it seems like the font color of the Source Control Explorer and the Team Explorer can not be changed by it. I also looked at Tools|Options|Environment|Fonts and Color for a setting but did not find anything. Is it possible to change the font color? How?

  Read the article

• I don't have a free PCI / PCI-e slot, can it be worked around?

  - by Borek

  I need to add a PCI(e) card to a nettop PC that is so small that the card won't fit there (and there is no external alternative like we're used to with external TV tuners). The only ports available are USB and eSATA, is it possible to somehow "dock" the PCI card into some device that would then connect to the PC via USB or eSATA? Or am I out of luck? (I don't mind the solution being visually ugly, I wouldn't even mind opening up the case and soldering some wires in, anything that would work would be great.)

  Read the article

• Two video card on one Mobo

  - by InfinityKing

  I recently purchased a new HP Pavilion p6-2265eo. It was then that I realised that it has only one DVI and one HDMI output.. I will connect my TV with the HDMI. so I am letft with only one DVI output. I need to have two monitors. Please help. Should I purchase a new video card and install it? My knowledge is limited. The specifications of my comp says that there is 1 x PCI-E x16, 3 x PCI-E x1. 1) I suppose that the video card already present in my purchase is connected on the PCI-E x16. Am I right? I dont want to open my desktop right now and check it for myself as it can void the warrenty. so I need an experienced person to tell me that. 2) I have an old nvidia geforce 7200 gt. Is it possible for me to connect it to my left over PCI-E x1? I searched for PCI-E x1 on the net and as far as I can understand the slot is too small for my old nvidia geforce 7200 gt graphic card. 3) what are the options? Please help this dummo :) Thankign you in advance,

  Read the article

< Previous Page | 336 337 338 339 340 341 342 343 344 345 346 347  | Next Page >