background foreground - Page 341

running a command line app with sudo and password automatically on start up OS X (Lion)

- by Designer023

I need to run an app at startup/login on my mac. I want it to launch in the background and start doing it's work without interrupting me or me having to start it up because I invariably forget and then when I need it, it wasn't running! I have tried using applescript to tell terminal to run it and type my password in, but it ends up opening multiple Terminal windows and not working. Ideally I need a script that I can just add to the user login items and it will run for me. The app has no way of taking a password argument either and it has a password as well as the sudo! I need a solution that can either be done as an applescript (which can be made into an executable) or i need a commandline script but I have no idea about them. This is the manual code I type >sudo serverStatus >password:123456 >password:serverpass Not sure if this is the right stack to ask, but I have no idea now and it's above my head! Thanks :D My applescript: tell application Terminal activate do shell script "sudo serverStatus" delay 5 do shell script "123456" delay 2 do shell script "serverpass" end tell

Read the article

Windows 7 just deleted 4 days of work

- by Mat

Hey! I'm just a bit about to freak out. I just finished a project and rebooted my computer. It didn't want to boot anymore so I had to use the Windows 7 system repair option. It ran for a minute and then booted up. Now most of my source code from the last 4 days of work is gone! Background: sometimes (most often after installing new software) my notebook won't boot up anymore. It will just show the little Windows 7 flag, but not read from the hard disk anymore. If I hard-abort and reboot then, it asks me whether to start Windows normally (which won't work) or to run "Windows startup repair". If I run it, it does some stuff for about two or three minutes and then I can boot Windows again. Usually after this, .exe files I added to the computer during previous days are gone - but other files so far were not touched. But now, after this happened, a whole bunch of ".as" (ActionScript source files) from my project are gone! Does anyone know where and whether there's a way to recover them?

Read the article

How to block access to addresses outside network (internet)

- by devnull

I have a homeserver, that is now connected to the internet with an own network device (ath0 - 192.168.1.x). It also has one more network interface (eth0 - 192.168.0.x). Soon I will get a second internet line that will be connected the second network. The server then has both networks with different internet lines available, but i only want it to connect to the internet on the old ath0 interface - not the new eth0 (192.168.0.x). Background of that constellation is that the new line has a volume-limit in traffic - the old hasn't and i need the new line for all mobile devices and laptops. The devices should be able to use the new network to connect to the internet and the server. The homeserver is a debian 6 with iptables and some already written rules for it. I need now a rule to block all outgoing internet access on the eth0 interface - i guess it could be something with --target != 192.168.0.0 but i did not succeed in finding the proper solution. Edit: found the solution: iptables -A OUTPUT -o eth0 -d 192.168.0.0/24 -m state --state NEW,ESTABLISHED -j ACCEPT With that setting, all traffic that uses the eth0 interface is only allowed if the destination is inside the network 192.168.0.x - all other traffic is denied .

Read the article

Revoke directory access for a particular user in Solaris

- by permissiontomars

I have a need to allow directory access to a particular user on my file system. I want this user to be unable to access any other directory in my file system (initially anyway. It may need access to some directories later). For example: I have a directory called /opt/mydir. - I want my dedicated user to only be able to access this directory, and nothing else. - I want all other users to be able to access this directory as normal. I'm new to Linux and its permissions. I've read a fair bit of background material but I'm a little confused. Is there anyway to revoke permissions to /opt/mydir for a single dedicated user? A possible flawed method would be to only allow access to /opt/mydir and exclude every other user. This won't work because I want all other users to work as normal; accessing the directory. I'm working on Solaris 10. Any suggestions are appreciated.

Read the article

USB Drive that simultaneously connects to more than one computer

- by user2499

Background: I have a portable USB drive that I use to make sure I have access to common files whenever at home, work, travel etc for cases when I may not have Internet/Network access of any kind. There are some cases when I have to work simultaneously on a laptop and a desktop computer, and for those cases I usually have to unplug this USB hard drive and move it between the two. Question: dual-computer USB drive? Is there a USB-based solution that would enable me to use this portable drive between two computers simultaneously? If there is not a USB-based solution, does anyone have alternative suggestions, consistent with the underlying rationale? Rationale: Sometimes I have to work on a desktop computer with locked-down networking capabilities (such as at the local photocopy shop) and it can be difficult to get a network configuration that allows dual-computer access without breaking things, or accidentally making my USB drive visible to the entire network. Basically what I need is a very simply LAN that is guaranteed to work regardless of the rules or constraints set by the network administrator for wherever I happen to be at the time. See also: http://superuser.com/questions/99274/how-to-connect-two-computers-with-usb

Read the article

I need help on my C++ assignment using MS Visual C++

- by krayzwytie

Ok, so I don't want you to do my homework for me, but I'm a little lost with this final assignment and need all the help I can get. Learning about programming is tough enough, but doing it online is next to impossible for me... Now, to get to the program, I am going to paste what I have so far. This includes mostly //comments and what I have written so far. If you can help me figure out where all the errors are and how to complete the assignment, I will really appreciate it. Like I said, I don't want you to do my homework for me (it's my final), but any constructive criticism is welcome. This is my final assignment for this class and it is due tomorrow (Sunday before midnight, Arizona time). This is the assignment: Examine the following situation: o Your company, Datamax, Inc., is in the process of automating its payroll systems. Your manager has asked you to create a program that calculates overtime pay for all employees. Your program must take into account the employee’s salary, total hours worked, and hours worked more than 40 in a week, and then provide an output that is useful and easily understood by company management. • Compile your program utilizing the following background information and the code outline in Appendix D (included in the code section). • Submit your project as an attachment including the code and the output. Company Background: o Three employees: Mark, John, and Mary o The end user needs to be prompted for three specific pieces of input—name, hours worked, and hourly wage. o Calculate overtime if input is greater than 40 hours per week. o Provide six test plans to verify the logic within the program. o Plan 1 must display the proper information for employee #1 with overtime pay. o Plan 2 must display the proper information for employee #1 with no overtime pay. o Plans 3-6 are duplicates of plan 1 and 2 but for the other employees. Program Requirements: o Define a base class to use for the entire program. o The class holds the function calls and the variables related to the overtime pay calculations. o Define one object per employee. Note there will be three employees. o Your program must take the objects created and implement calculations based on total salaries, total hours, and the total number of overtime hours. See the Employee Summary Data section of the sample output. Logic Steps to Complete Your Program: o Define your base class. o Define your objects from your base class. o Prompt for user input, updating your object classes for all three users. o Implement your overtime pay calculations. o Display overtime or regular time pay calculations. See the sample output below. o Implement object calculations by summarizing your employee objects and display the summary information in the example below. And this is the code: // Final_Project.cpp : Defines the entry point for the console application. // #include "stdafx.h" #include <iostream> #include <string> #include <iomanip> using namespace std; // //CLASS DECLARATION SECTION // class CEmployee { public: void ImplementCalculations(string EmployeeName, double hours, double wage); void DisplayEmployInformation(void); void Addsomethingup (CEmployee, CEmployee, CEmployee); string EmployeeName ; int hours ; int overtime_hours ; int iTotal_hours ; int iTotal_OvertimeHours ; float wage ; float basepay ; float overtime_pay ; float overtime_extra ; float iTotal_salaries ; float iIndividualSalary ; }; int main() { system("cls"); cout << "Welcome to the Employee Pay Center"; /* Use this section to define your objects. You will have one object per employee. You have only three employees. The format is your class name and your object name. */ std::cout << "Please enter Employee's Name: "; std::cin >> EmployeeName; std::cout << "Please enter Total Hours for (EmployeeName): "; std::cin >> hours; std::cout << "Please enter Base Pay for(EmployeeName): "; std::cin >> basepay; /* Here you will prompt for the first employee’s information. Prompt the employee name, hours worked, and the hourly wage. For each piece of information, you will update the appropriate class member defined above. Example of Prompts Enter the employee name = Enter the hours worked = Enter his or her hourly wage = */ /* Here you will prompt for the second employee’s information. Prompt the employee name, hours worked, and the hourly wage. For each piece of information, you will update the appropriate class member defined above. Enter the employee name = Enter the hours worked = Enter his or her hourly wage = */ /* Here you will prompt for the third employee’s information. Prompt the employee name, hours worked, and the hourly wage. For each piece of information, you will update the appropriate class member defined above. Enter the employee name = Enter the hours worked = Enter his or her hourly wage = */ /* Here you will implement a function call to implement the employ calcuations for each object defined above. You will do this for each of the three employees or objects. The format for this step is the following: [(object name.function name(objectname.name, objectname.hours, objectname.wage)] ; */ /* This section you will send all three objects to a function that will add up the the following information: - Total Employee Salaries - Total Employee Hours - Total Overtime Hours The format for this function is the following: - Define a new object. - Implement function call [objectname.functionname(object name 1, object name 2, object name 3)] /* } //End of Main Function void CEmployee::ImplementCalculations (string EmployeeName, double hours, double wage){ //Initialize overtime variables overtime_hours=0; overtime_pay=0; overtime_extra=0; if (hours > 40) { /* This section is for the basic calculations for calculating overtime pay. - base pay = 40 hours times the hourly wage - overtime hours = hours worked – 40 - overtime pay = hourly wage * 1.5 - overtime extra pay over 40 = overtime hours * overtime pay - salary = overtime money over 40 hours + your base pay */ /* Implement function call to output the employee information. Function is defined below. */ } // if (hours > 40) else { /* Here you are going to calculate the hours less than 40 hours. - Your base pay is = your hours worked times your wage - Salary = your base pay */ /* Implement function call to output the employee information. Function is defined below. */ } // End of the else } //End of Primary Function void CEmployee::DisplayEmployInformation(); { // This function displays all the employee output information. /* This is your cout statements to display the employee information: Employee Name ............. = Base Pay .................. = Hours in Overtime ......... = Overtime Pay Amount........ = Total Pay ................. = */ } // END OF Display Employee Information void CEmployee::Addsomethingup (CEmployee Employ1, CEmployee Employ2) { // Adds two objects of class Employee passed as // function arguments and saves them as the calling object's data member values. /* Add the total hours for objects 1, 2, and 3. Add the salaries for each object. Add the total overtime hours. */ /* Then display the information below. %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %%%% EMPLOYEE SUMMARY DATA%%%%%%%%%%%%%%%%%%%%%%% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %%%% Total Employee Salaries ..... = 576.43 %%%% Total Employee Hours ........ = 108 %%%% Total Overtime Hours......... = 5 %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% */ } // End of function

Read the article

Android WebView not loading a JavaScript file, but Android Browser loads it fine.

- by Justin

I'm writing an application which connects to a back office site. The backoffice site contains a whole slew of JavaScript functions, at least 100 times the average site. Unfortunately it does not load them, and causes much of the functionality to not work properly. So I am running a test. I put a page out on my server which loads the FireBugLite javascript text. Its a lot of javascript and perfect to test and see if the Android WebView will load it. The WebView loads nothing, but the browser loads the Firebug Icon. What on earth would make the difference, why can it run in the browser and not in my WebView? Any suggestions. More background information, in order to get the stinking backoffice application available on a Droid (or any other platform except windows) I needed to trick the bakcoffice application to believe what's accessing the website is Internet Explorer. I do this by modifying the WebView User Agent. Also for this application I've slimmed my landing page, so I could give you the source to offer me aid. package ksc.myKMB; import android.app.Activity; import android.app.AlertDialog; import android.app.Dialog; import android.app.ProgressDialog; import android.content.DialogInterface; import android.graphics.Bitmap; import android.os.Bundle; import android.view.Menu; import android.view.MenuInflater; import android.view.MenuItem; import android.view.Window; import android.webkit.WebChromeClient; import android.webkit.WebView; import android.webkit.WebSettings; import android.webkit.WebViewClient; import android.widget.Toast; public class myKMB extends Activity { /** Called when the activity is first created. */ @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); /** Performs base set up */ /** Create a Activity of this Activity, IE myProcess */ myProcess = this; /*** Create global objects and web browsing objects */ HideDialogOnce = true; webview = new WebView(this) { }; webChromeClient = new WebChromeClient() { public void onProgressChanged(WebView view, int progress) { // Activities and WebViews measure progress with different scales. // The progress meter will automatically disappear when we reach 100% myProcess.setProgress((progress * 100)); //CreateMessage("Progress is : " + progress); } }; webViewClient = new WebViewClient() { public void onReceivedError(WebView view, int errorCode, String description, String failingUrl) { Toast.makeText(myProcess, MessageBegText + description + MessageEndText, Toast.LENGTH_SHORT).show(); } public void onPageFinished (WebView view, String url) { /** Hide dialog */ try { // loadingDialog.dismiss(); } finally { } //myProcess.setProgress(1000); /** Fon't show the dialog while I'm performing fixes */ //HideDialogOnce = true; view.loadUrl("javascript:document.getElementById('JTRANS011').style.visibility='visible';"); } public void onPageStarted(WebView view, String url, Bitmap favicon) { if (HideDialogOnce == false) { //loadingDialog = ProgressDialog.show(myProcess, "", // "One moment, the page is laoding...", true); } else { //HideDialogOnce = true; } } }; getWindow().requestFeature(Window.FEATURE_PROGRESS); webview.setWebChromeClient(webChromeClient); webview.setWebViewClient(webViewClient); setContentView(webview); /** Load the Keynote Browser Settings */ LoadSettings(); webview.loadUrl(LandingPage); } /** Get Menu */ @Override public boolean onCreateOptionsMenu(Menu menu) { MenuInflater inflater = getMenuInflater(); inflater.inflate(R.menu.menu, menu); return true; } /** an item gets pushed */ @Override public boolean onOptionsItemSelected(MenuItem item) { switch (item.getItemId()) { // We have only one menu option case R.id.quit: System.exit(0); break; case R.id.back: webview.goBack(); case R.id.refresh: webview.reload(); case R.id.info: //IncludeJavascript(""); } return true; } /** Begin Globals */ public WebView webview; public WebChromeClient webChromeClient; public WebViewClient webViewClient; public ProgressDialog loadingDialog; public Boolean HideDialogOnce; public Activity myProcess; public String OverideUserAgent_IE = "Mozilla/5.0 (Windows; MSIE 6.0; Android 1.6; en-US) AppleWebKit/525.10+ (KHTML, like Gecko) Version/3.0.4 Safari/523.12.2 myKMB/1.0"; public String LandingPage = "http://kscserver.com/main-leap-slim.html"; public String MessageBegText = "Problem making a connection, Details: "; public String MessageEndText = " For Support Call: (xxx) xxx - xxxx."; public void LoadSettings() { webview.getSettings().setUserAgentString(OverideUserAgent_IE); webview.getSettings().setJavaScriptEnabled(true); webview.getSettings().setBuiltInZoomControls(true); webview.getSettings().setSupportZoom(true); } /** Creates a message alert dialog */ public void CreateMessage(String message) { AlertDialog.Builder builder = new AlertDialog.Builder(this); builder.setMessage(message) .setCancelable(true) .setNegativeButton("Close", new DialogInterface.OnClickListener() { public void onClick(DialogInterface dialog, int id) { dialog.cancel(); } }); AlertDialog alert = builder.create(); alert.show(); } } My Application is running in the background, and as you can see no Firebug in the lower right hand corner. However the browser (the emulator on top) has the same page but shows the firebug. What am I doing wrong? I'm assuming its either not enough memory allocated to the application, process power allocation, or a physical memory thing. I can't tell, all I know is the results are strange. I get the same thing form my android device, the application shows no firebug but the browser shows the firebug.

Read the article

Custom filtering in Android using ArrayAdapter

- by Alxandr

I'm trying to filter my ListView which is populated with this ArrayAdapter: package me.alxandr.android.mymir.adapters; import java.util.ArrayList; import java.util.Collection; import java.util.Collections; import java.util.HashMap; import java.util.Iterator; import java.util.Set; import me.alxandr.android.mymir.R; import me.alxandr.android.mymir.model.Manga; import android.content.Context; import android.util.Log; import android.view.LayoutInflater; import android.view.View; import android.view.ViewGroup; import android.widget.ArrayAdapter; import android.widget.Filter; import android.widget.SectionIndexer; import android.widget.TextView; public class MangaListAdapter extends ArrayAdapter<Manga> implements SectionIndexer { public ArrayList<Manga> items; public ArrayList<Manga> filtered; private Context context; private HashMap<String, Integer> alphaIndexer; private String[] sections = new String[0]; private Filter filter; private boolean enableSections; public MangaListAdapter(Context context, int textViewResourceId, ArrayList<Manga> items, boolean enableSections) { super(context, textViewResourceId, items); this.filtered = items; this.items = filtered; this.context = context; this.filter = new MangaNameFilter(); this.enableSections = enableSections; if(enableSections) { alphaIndexer = new HashMap<String, Integer>(); for(int i = items.size() - 1; i >= 0; i--) { Manga element = items.get(i); String firstChar = element.getName().substring(0, 1).toUpperCase(); if(firstChar.charAt(0) > 'Z' || firstChar.charAt(0) < 'A') firstChar = "@"; alphaIndexer.put(firstChar, i); } Set<String> keys = alphaIndexer.keySet(); Iterator<String> it = keys.iterator(); ArrayList<String> keyList = new ArrayList<String>(); while(it.hasNext()) keyList.add(it.next()); Collections.sort(keyList); sections = new String[keyList.size()]; keyList.toArray(sections); } } @Override public View getView(int position, View convertView, ViewGroup parent) { View v = convertView; if(v == null) { LayoutInflater vi = (LayoutInflater)context.getSystemService(Context.LAYOUT_INFLATER_SERVICE); v = vi.inflate(R.layout.mangarow, null); } Manga o = items.get(position); if(o != null) { TextView tt = (TextView) v.findViewById(R.id.MangaRow_MangaName); TextView bt = (TextView) v.findViewById(R.id.MangaRow_MangaExtra); if(tt != null) tt.setText(o.getName()); if(bt != null) bt.setText(o.getLastUpdated() + " - " + o.getLatestChapter()); if(enableSections && getSectionForPosition(position) != getSectionForPosition(position + 1)) { TextView h = (TextView) v.findViewById(R.id.MangaRow_Header); h.setText(sections[getSectionForPosition(position)]); h.setVisibility(View.VISIBLE); } else { TextView h = (TextView) v.findViewById(R.id.MangaRow_Header); h.setVisibility(View.GONE); } } return v; } @Override public void notifyDataSetInvalidated() { if(enableSections) { for (int i = items.size() - 1; i >= 0; i--) { Manga element = items.get(i); String firstChar = element.getName().substring(0, 1).toUpperCase(); if(firstChar.charAt(0) > 'Z' || firstChar.charAt(0) < 'A') firstChar = "@"; alphaIndexer.put(firstChar, i); } Set<String> keys = alphaIndexer.keySet(); Iterator<String> it = keys.iterator(); ArrayList<String> keyList = new ArrayList<String>(); while (it.hasNext()) { keyList.add(it.next()); } Collections.sort(keyList); sections = new String[keyList.size()]; keyList.toArray(sections); super.notifyDataSetInvalidated(); } } public int getPositionForSection(int section) { if(!enableSections) return 0; String letter = sections[section]; return alphaIndexer.get(letter); } public int getSectionForPosition(int position) { if(!enableSections) return 0; int prevIndex = 0; for(int i = 0; i < sections.length; i++) { if(getPositionForSection(i) > position && prevIndex <= position) { prevIndex = i; break; } prevIndex = i; } return prevIndex; } public Object[] getSections() { return sections; } @Override public Filter getFilter() { if(filter == null) filter = new MangaNameFilter(); return filter; } private class MangaNameFilter extends Filter { @Override protected FilterResults performFiltering(CharSequence constraint) { // NOTE: this function is *always* called from a background thread, and // not the UI thread. constraint = constraint.toString().toLowerCase(); FilterResults result = new FilterResults(); if(constraint != null && constraint.toString().length() > 0) { ArrayList<Manga> filt = new ArrayList<Manga>(); ArrayList<Manga> lItems = new ArrayList<Manga>(); synchronized (items) { Collections.copy(lItems, items); } for(int i = 0, l = lItems.size(); i < l; i++) { Manga m = lItems.get(i); if(m.getName().toLowerCase().contains(constraint)) filt.add(m); } result.count = filt.size(); result.values = filt; } else { synchronized(items) { result.values = items; result.count = items.size(); } } return result; } @SuppressWarnings("unchecked") @Override protected void publishResults(CharSequence constraint, FilterResults results) { // NOTE: this function is *always* called from the UI thread. filtered = (ArrayList<Manga>)results.values; notifyDataSetChanged(); } } } However, when I call filter('test') on the filter nothing happens at all (or the background-thread is run, but the list isn't filtered as far as the user conserns). How can I fix this?

Read the article

Dependency Property WPF Grid

- by developer

Hi All, I want to Bind the textblock text in WPF datagrid to a dependency property. Somehow, nothing gets displayed, but when I use the same textblock binding outside the grid, everything works fine. Below is my code, <Window.Resources> <Style x:Key="cellCenterAlign" TargetType="{x:Type toolkit:DataGridCell}"> <Setter Property="Template"> <Setter.Value> <ControlTemplate TargetType="{x:Type toolkit:DataGridCell}"> <Grid Background="{TemplateBinding Background}"> <ContentPresenter HorizontalAlignment="Center" VerticalAlignment="Center"/> </Grid> </ControlTemplate> </Setter.Value> </Setter> </Style> <Style x:Key="ColumnHeaderStyle" TargetType="{x:Type toolkit:DataGridColumnHeader}"> <Setter Property="VerticalContentAlignment" Value="Center" /> <Setter Property="HorizontalContentAlignment" Value="Center"/> </Style> <ObjectDataProvider MethodName="GetValues" ObjectType="{x:Type sys:Enum}" x:Key="RoleValues"> <ObjectDataProvider.MethodParameters> <x:Type TypeName="domain:SubscriptionRole"/> </ObjectDataProvider.MethodParameters> </ObjectDataProvider> <DataTemplate x:Key="myTemplate"> <StackPanel> <TextBlock Text="{Binding Path=OtherSubs}"/> </StackPanel> </DataTemplate> </Window.Resources> <Grid> <Grid.RowDefinitions> <RowDefinition Height="220"/> <RowDefinition Height="Auto"/> </Grid.RowDefinitions> <StackPanel Grid.Row="0"> <toolkit:DataGrid Name="definitionGrid" Margin="0,10,0,0" AutoGenerateColumns="False" CanUserAddRows="False" CanUserDeleteRows="False" IsReadOnly="False" RowHeight="25" FontWeight="Normal" ItemsSource="{Binding programSubscription}" ColumnHeaderStyle="{DynamicResource ColumnHeaderStyle}" SelectionMode="Single" ScrollViewer.HorizontalScrollBarVisibility="Disabled" Width="450" ScrollViewer.VerticalScrollBarVisibility="Auto" Height="200"> <toolkit:DataGrid.Columns> <toolkit:DataGridTextColumn Header="Program" Width="80" Binding="{Binding Program.JobNum}" CellStyle="{StaticResource cellCenterAlign}" IsReadOnly="True"/> <toolkit:DataGridTemplateColumn Header="Role" Width="80" CellStyle="{StaticResource cellCenterAlign}"> <toolkit:DataGridTemplateColumn.CellTemplate> <DataTemplate> <ComboBox SelectedItem="{Binding Role}" ItemsSource="{Binding Source={StaticResource RoleValues}}" Width="70"> <ComboBox.Style> <Style> <Style.Triggers> <DataTrigger Binding="{Binding Path=Role}" Value="Owner"> <Setter Property="ComboBox.Focusable" Value="False"/> <Setter Property="ComboBox.IsEnabled" Value="False"/> <Setter Property="ComboBox.IsHitTestVisible" Value="False"/> </DataTrigger> </Style.Triggers> </Style> </ComboBox.Style> </ComboBox> </DataTemplate> </toolkit:DataGridTemplateColumn.CellTemplate> </toolkit:DataGridTemplateColumn> <toolkit:DataGridCheckBoxColumn Header="Email" Width="60" Binding="{Binding ReceivesEmail}" CellStyle="{StaticResource cellCenterAlign}"/>  <toolkit:DataGridTemplateColumn Header="Others" Width="220" CellStyle="{StaticResource cellCenterAlign}" IsReadOnly="True"> <toolkit:DataGridTemplateColumn.CellTemplate> <DataTemplate> <TextBlock Text="{Binding Path=OtherSubs}"/> </DataTemplate> </toolkit:DataGridTemplateColumn.CellTemplate> </toolkit:DataGridTemplateColumn> </toolkit:DataGrid.Columns> </toolkit:DataGrid> <TextBlock Text="{Binding Path=OtherSubs}"/> </StackPanel> <Grid Grid.Row="1"> <Grid.ColumnDefinitions> <ColumnDefinition Width="200"/> <ColumnDefinition Width="*"/> </Grid.ColumnDefinitions> <StackPanel Grid.Column="0" HorizontalAlignment="Center" VerticalAlignment="Center"> <CheckBox Content="Show Only Active Programs" IsChecked="True" Margin="0,0,8,0"/> </StackPanel> <StackPanel Orientation="Horizontal" VerticalAlignment="Center" Grid.Column="1" HorizontalAlignment="Right"> <Button Content="Save" Height="23" Width="75" Margin="0,0,8,0" Click="Save_Click"/> <Button Content="Cancel" Height="23" Width="75" Margin="0,0,8,0" Click="Cancel_Click" /> </StackPanel> </Grid> </Grid> Code-Behind public partial class ProgramSubscriptions : Window { public static ObservableCollection programSubscription { get; set; } public string OtherSubs { get { return (string)GetValue(OtherSubsProperty); } set { SetValue(OtherSubsProperty, value); } } public static readonly DependencyProperty OtherSubsProperty = DependencyProperty.Register("OtherSubs", typeof(string), typeof(ProgramSubscriptions), new UIPropertyMetadata(string.Empty)); private string CurrentUsername = "test"; public ProgramSubscriptions() { InitializeComponent(); DataContext = this; LoadData(); } protected void LoadData() { programSubscription = new ObservableCollection<ProgramSubscriptionViewModel>(); if (res != null && res.TotalResults > 0) { List<ProgramSubscriptionViewModel> UserPrgList = new List<ProgramSubscriptionViewModel>(); //other.... List<ProgramSubscriptionViewModel> OtherPrgList = new List<ProgramSubscriptionViewModel>(); ArrayList myList = new ArrayList(); foreach (DomainObject obj in res.ResultSet) { ProgramSubscription prg = (ProgramSubscription)obj; if (prg.Subscriber.Username == CurrentUsername) { UserPrgList.Add(new ProgramSubscriptionViewModel(prg)); myList.Add(prg.Program.ID); } else OtherPrgList.Add(new ProgramSubscriptionViewModel(prg)); } for (int i = 0; i < UserPrgList.Count; i++) { ProgramSubscriptionViewModel item = UserPrgList[i]; programSubscription.Add(item); } //other.... for (int i = 0; i < OtherPrgList.Count; i++) { foreach (int y in myList) { ProgramSubscriptionViewModel otheritem = OtherPrgList[i]; if (y == otheritem.Program.ID) OtherSubs += otheritem.Subscriber.Username + ", "; } } } } } I posted the entire code. What exactly I want to do is in the datagridtemplatecolumn for others I want to display the usernames that are not in CurrentUsername, but they have the same program Id as the CurrentUsername. Please do let me know if there is another way that i can make this work, instead of using a dependencyproperty, althouht for testing I did put a textblock below datagrid, and it works perfectly fine.. Help!

Read the article

Setting a Visual State from a data bound enum in WPF

- by firoso

Hey all, I've got a scenario where I want to switch the visiblity of 4 different content controls. The visual states I have set opacity, and collapsed based on each given state (See code.) What I'd like to do is have the visual state bound to a property of my View Model of type Enum. I tried using DataStateBehavior, but it requires true/false, which doesn't work for me. So I tried DataStateSwitchBehavior, which seems to be totally broken for WPF4 from what I could tell. Is there a better way to be doing this? I'm really open to different approaches if need be, but I'd really like to keep this enum in the equation. Edit: The code shouldn't be too important, I just need to know if there's a well known solution to this problem. <UserControl xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" xmlns:d="http://schemas.microsoft.com/expression/blend/2008" xmlns:Custom="http://schemas.microsoft.com/expression/2010/interactivity" xmlns:ei="http://schemas.microsoft.com/expression/2010/interactions" xmlns:ee="http://schemas.microsoft.com/expression/2010/effects" xmlns:customBehaviors="clr-namespace:SEL.MfgTestDev.ESS.Behaviors" x:Class="SEL.MfgTestDev.ESS.View.PresenterControl" mc:Ignorable="d" d:DesignHeight="624" d:DesignWidth="1104" d:DataContext="{Binding ApplicationViewModel, Mode=OneWay, Source={StaticResource Locator}}"> <Grid> <Grid.Resources> <ResourceDictionary> <ResourceDictionary.MergedDictionaries> <ResourceDictionary Source="Layout/TerminalViewTemplate.xaml"/> <ResourceDictionary Source="Layout/DebugViewTemplate.xaml"/> <ResourceDictionary Source="Layout/ProgressViewTemplate.xaml"/> <ResourceDictionary Source="Layout/LoadoutViewTemplate.xaml"/> </ResourceDictionary.MergedDictionaries> </ResourceDictionary> </Grid.Resources> <Custom:Interaction.Behaviors> <customBehaviors:DataStateSwitchBehavior Binding="{Binding ApplicationViewState}"> <customBehaviors:DataStateSwitchCase State="LoadoutState" Value="Loadout"/> </customBehaviors:DataStateSwitchBehavior> </Custom:Interaction.Behaviors> <VisualStateManager.VisualStateGroups> <VisualStateGroup x:Name="ApplicationStates" ei:ExtendedVisualStateManager.UseFluidLayout="True"> <VisualStateGroup.Transitions> <VisualTransition GeneratedDuration="0:0:1"> <VisualTransition.GeneratedEasingFunction> <SineEase EasingMode="EaseInOut"/> </VisualTransition.GeneratedEasingFunction> <ei:ExtendedVisualStateManager.TransitionEffect> <ee:SmoothSwirlGridTransitionEffect/> </ei:ExtendedVisualStateManager.TransitionEffect> </VisualTransition> </VisualStateGroup.Transitions> <VisualState x:Name="LoadoutState"> <Storyboard> <DoubleAnimationUsingKeyFrames Storyboard.TargetProperty="(UIElement.Opacity)" Storyboard.TargetName="LoadoutPage"> <EasingDoubleKeyFrame KeyTime="0" Value="1"/> </DoubleAnimationUsingKeyFrames> <ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="(UIElement.Visibility)" Storyboard.TargetName="LoadoutPage"> <DiscreteObjectKeyFrame KeyTime="0" Value="{x:Static Visibility.Visible}"/> </ObjectAnimationUsingKeyFrames> </Storyboard> </VisualState> <VisualState x:Name="ProgressState"> <Storyboard> <DoubleAnimationUsingKeyFrames Storyboard.TargetProperty="(UIElement.Opacity)" Storyboard.TargetName="ProgressPage"> <EasingDoubleKeyFrame KeyTime="0" Value="1"/> </DoubleAnimationUsingKeyFrames> <ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="(UIElement.Visibility)" Storyboard.TargetName="ProgressPage"> <DiscreteObjectKeyFrame KeyTime="0" Value="{x:Static Visibility.Visible}"/> </ObjectAnimationUsingKeyFrames> </Storyboard> </VisualState> <VisualState x:Name="DebugState"> <Storyboard> <ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="(UIElement.Visibility)" Storyboard.TargetName="DebugPage"> <DiscreteObjectKeyFrame KeyTime="0" Value="{x:Static Visibility.Visible}"/> </ObjectAnimationUsingKeyFrames> <DoubleAnimationUsingKeyFrames Storyboard.TargetProperty="(UIElement.Opacity)" Storyboard.TargetName="DebugPage"> <EasingDoubleKeyFrame KeyTime="0" Value="1"/> </DoubleAnimationUsingKeyFrames> </Storyboard> </VisualState> <VisualState x:Name="TerminalState"> <Storyboard> <ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="(UIElement.Visibility)" Storyboard.TargetName="TerminalPage"> <DiscreteObjectKeyFrame KeyTime="0" Value="{x:Static Visibility.Visible}"/> </ObjectAnimationUsingKeyFrames> <DoubleAnimationUsingKeyFrames Storyboard.TargetProperty="(UIElement.Opacity)" Storyboard.TargetName="TerminalPage"> <EasingDoubleKeyFrame KeyTime="0" Value="1"/> </DoubleAnimationUsingKeyFrames> </Storyboard> </VisualState> </VisualStateGroup> </VisualStateManager.VisualStateGroups> <ContentControl x:Name="LoadoutPage" ContentTemplate="{StaticResource LoadoutViewTemplate}" Opacity="0" Content="{Binding}" Visibility="Collapsed"/> <ContentControl x:Name="ProgressPage" ContentTemplate="{StaticResource ProgressViewTemplate}" Opacity="0" Content="{Binding}" Visibility="Collapsed"/> <ContentControl x:Name="DebugPage" ContentTemplate="{StaticResource DebugViewTemplate}" Opacity="0" Content="{Binding}" Visibility="Collapsed"/> <ContentControl x:Name="TerminalPage" ContentTemplate="{StaticResource TerminalViewTemplate}" Opacity="0" Content="{Binding}" Visibility="Collapsed"/> <TextBlock HorizontalAlignment="Left" TextWrapping="Wrap" VerticalAlignment="Top" Text="{Binding ApplicationViewState}"> <TextBlock.Background> <LinearGradientBrush EndPoint="0.5,1" StartPoint="0.5,0"> <GradientStop Color="Black" Offset="0"/> <GradientStop Color="White" Offset="1"/> </LinearGradientBrush> </TextBlock.Background> </TextBlock> </Grid>

Read the article

Bindable richTextBox still hanging in memory {WPF, Caliburn.Micro}

- by Paul

Hi, I use in WFP Caliburn.Micro Framework. I need bindable richTextbox for Document property. I found many ways how do it bindable richTextBox. But I have one problem. From parent window I open child window. Child window consist bindable richTextBox user control. After I close child window and use memory profiler view class with bindabelrichTextBox control and view model class is still hanging in memory. - this cause memory leaks. If I use richTextBox from .NET Framework or richTextBox from Extended WPF Toolkit it doesn’t cause this memory leak problem. I can’t identified problem in bindable richTextBox class. Here is ist class for bindable richTextBox: Base class can be from .NET or Extended toolkit. /// <summary> /// Represents a bindable rich editing control which operates on System.Windows.Documents.FlowDocument /// objects. /// </summary> public class BindableRichTextBox : RichTextBox { /// <summary> /// Identifies the <see cref="Document"/> dependency property. /// </summary> public static readonly DependencyProperty DocumentProperty = DependencyProperty.Register("Document", typeof(FlowDocument), typeof(BindableRichTextBox)); /// <summary> /// Initializes a new instance of the <see cref="BindableRichTextBox"/> class. /// </summary> public BindableRichTextBox() : base() { } /// <summary> /// Initializes a new instance of the <see cref="BindableRichTextBox"/> class. /// </summary> /// <param title="document">A <see cref="T:System.Windows.Documents.FlowDocument"></see> to be added as the initial contents of the new <see cref="T:System.Windows.Controls.BindableRichTextBox"></see>.</param> public BindableRichTextBox(FlowDocument document) : base(document) { } /// <summary> /// Raises the <see cref="E:System.Windows.FrameworkElement.Initialized"></see> event. This method is invoked whenever <see cref="P:System.Windows.FrameworkElement.IsInitialized"></see> is set to true internally. /// </summary> /// <param title="e">The <see cref="T:System.Windows.RoutedEventArgs"></see> that contains the event data.</param> protected override void OnInitialized(EventArgs e) { // Hook up to get notified when DocumentProperty changes. DependencyPropertyDescriptor descriptor = DependencyPropertyDescriptor.FromProperty(DocumentProperty, typeof(BindableRichTextBox)); descriptor.AddValueChanged(this, delegate { // If the underlying value of the dependency property changes, // update the underlying document, also. base.Document = (FlowDocument)GetValue(DocumentProperty); }); // By default, we support updates to the source when focus is lost (or, if the LostFocus // trigger is specified explicity. We don't support the PropertyChanged trigger right now. this.LostFocus += new RoutedEventHandler(BindableRichTextBox_LostFocus); base.OnInitialized(e); } /// <summary> /// Handles the LostFocus event of the BindableRichTextBox control. /// </summary> /// <param title="sender">The source of the event.</param> /// <param title="e">The <see cref="System.Windows.RoutedEventArgs"/> instance containing the event data.</param> void BindableRichTextBox_LostFocus(object sender, RoutedEventArgs e) { // If we have a binding that is set for LostFocus or Default (which we are specifying as default) // then update the source. Binding binding = BindingOperations.GetBinding(this, DocumentProperty); if (binding.UpdateSourceTrigger == UpdateSourceTrigger.Default || binding.UpdateSourceTrigger == UpdateSourceTrigger.LostFocus) { BindingOperations.GetBindingExpression(this, DocumentProperty).UpdateSource(); } } /// <summary> /// Gets or sets the <see cref="T:System.Windows.Documents.FlowDocument"></see> that represents the contents of the <see cref="T:System.Windows.Controls.BindableRichTextBox"></see>. /// </summary> /// <value></value> /// <returns>A <see cref="T:System.Windows.Documents.FlowDocument"></see> object that represents the contents of the <see cref="T:System.Windows.Controls.BindableRichTextBox"></see>.By default, this property is set to an empty <see cref="T:System.Windows.Documents.FlowDocument"></see>. Specifically, the empty <see cref="T:System.Windows.Documents.FlowDocument"></see> contains a single <see cref="T:System.Windows.Documents.Paragraph"></see>, which contains a single <see cref="T:System.Windows.Documents.Run"></see> which contains no text.</returns> /// <exception cref="T:System.ArgumentException">Raised if an attempt is made to set this property to a <see cref="T:System.Windows.Documents.FlowDocument"></see> that represents the contents of another <see cref="T:System.Windows.Controls.RichTextBox"></see>.</exception> /// <exception cref="T:System.ArgumentNullException">Raised if an attempt is made to set this property to null.</exception> /// <exception cref="T:System.InvalidOperationException">Raised if this property is set while a change block has been activated.</exception> public new FlowDocument Document { get { return (FlowDocument)GetValue(DocumentProperty); } set { SetValue(DocumentProperty, value); } } } Thank fro help and advice. Qucik example: Child window with .NET richTextBox <Window x:Class="WpfApplication2.Window1" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" Title="Window1" Height="300" Width="300"> <Grid> <RichTextBox Background="Green" VerticalScrollBarVisibility="Auto" HorizontalScrollBarVisibility="Auto" FontSize="13" Margin="4,4,4,4" Grid.Row="0"/> </Grid> </Window> This window I open from parent window: var w = new Window1(); w.Show(); Then close this window, check with memory profiler and it memory doesn’t exist any object of window1 - richTextBox. It’s Ok. But then I try bindable richTextBox: Child window 2: <Window x:Class="WpfApplication2.Window2" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:Controls="clr-namespace:WpfApplication2.Controls" Title="Window2" Height="300" Width="300"> <Grid> <Controls:BindableRichTextBox Background="Red" VerticalScrollBarVisibility="Auto" HorizontalScrollBarVisibility="Auto" FontSize="13" Margin="4,4,4,4" Grid.Row="0" /> </Grid> </Window> Open child window 2, close this child window and in memory are still alive object of this child window also bindable richTextBox object.

Read the article

MVVM/WPF: DataTemplate is not changed in Wizard

- by msfanboy

Hello, I wonder why my contentcontrol(headeredcontentcontrol) does not change the datatemplates when I press the previous/next button. While debugging everything seems ok means I jump forth and back the collection of wizardpages but always the first page is shown and its header text not the usercontrol is visible. What do I have forgotten? using System; using System.Collections.Generic; using System.Linq; using System.Text; using GalaSoft.MvvmLight.Command; using System.Collections.ObjectModel; using System.Diagnostics; using System.ComponentModel; namespace TBM.ViewModel { public class WizardMainViewModel { WizardPageViewModelBase _currentPage; ReadOnlyCollection _pages; RelayCommand _moveNextCommand; RelayCommand _movePreviousCommand; public WizardMainViewModel() { this.CurrentPage = this.Pages[0]; } public RelayCommand MoveNextCommand { get { return _moveNextCommand ?? (_moveNextCommand = new RelayCommand(() => this.MoveToNextPage(), () => this.CanMoveToNextPage)); } } public RelayCommand MovePreviousCommand { get { return _movePreviousCommand ?? (_movePreviousCommand = new RelayCommand( () => this.MoveToPreviousPage(), () => this.CanMoveToPreviousPage)); } } bool CanMoveToPreviousPage { get { return 0 < this.CurrentPageIndex; } } bool CanMoveToNextPage { get { return this.CurrentPage != null && this.CurrentPage.IsValid(); } } void MoveToPreviousPage() { this.CurrentPage = this.Pages[this.CurrentPageIndex - 1]; } void MoveToNextPage() { if (this.CurrentPageIndex < this.Pages.Count - 1) this.CurrentPage = this.Pages[this.CurrentPageIndex + 1]; } /// <summary> /// Returns the page ViewModel that the user is currently viewing. /// </summary> public WizardPageViewModelBase CurrentPage { get { return _currentPage; } private set { if (value == _currentPage) return; if (_currentPage != null) _currentPage.IsCurrentPage = false; _currentPage = value; if (_currentPage != null) _currentPage.IsCurrentPage = true; this.OnPropertyChanged("CurrentPage"); this.OnPropertyChanged("IsOnLastPage"); } } public bool IsOnLastPage { get { return this.CurrentPageIndex == this.Pages.Count - 1; } } /// <summary> /// Returns a read-only collection of all page ViewModels. /// </summary> public ReadOnlyCollection<WizardPageViewModelBase> Pages { get { return _pages ?? CreatePages(); } } ReadOnlyCollection<WizardPageViewModelBase> CreatePages() { WizardPageViewModelBase welcomePage = new WizardWelcomePageViewModel(); WizardPageViewModelBase schoolclassPage = new WizardSchoolclassSubjectPageViewModel(); WizardPageViewModelBase lessonPage = new WizardLessonTimesPageViewModel(); WizardPageViewModelBase timetablePage = new WizardTimeTablePageViewModel(); WizardPageViewModelBase finishPage = new WizardFinishPageViewModel(); var pages = new List<WizardPageViewModelBase>(); pages.Add(welcomePage); pages.Add(schoolclassPage); pages.Add(lessonPage); pages.Add(timetablePage); pages.Add(finishPage); return _pages = new ReadOnlyCollection<WizardPageViewModelBase>(pages); } int CurrentPageIndex { get { if (this.CurrentPage == null) { Debug.Fail("Why is the current page null?"); return -1; } return this.Pages.IndexOf(this.CurrentPage); } } public event PropertyChangedEventHandler PropertyChanged; void OnPropertyChanged(string propertyName) { PropertyChangedEventHandler handler = this.PropertyChanged; if (handler != null) handler(this, new PropertyChangedEventArgs(propertyName)); } } } <UserControl x:Class="TBM.View.WizardMainView" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" xmlns:d="http://schemas.microsoft.com/expression/blend/2008" xmlns:ViewModel="clr-namespace:TBM.ViewModel" xmlns:View="clr-namespace:TBM.View" mc:Ignorable="d" > <UserControl.Resources> <DataTemplate DataType="{x:Type ViewModel:WizardWelcomePageViewModel}"> <View:WizardWelcomePageView /> </DataTemplate> <DataTemplate DataType="{x:Type ViewModel:WizardSchoolclassSubjectPageViewModel}"> <View:WizardSchoolclassSubjectPageView /> </DataTemplate> <DataTemplate DataType="{x:Type ViewModel:WizardLessonTimesPageViewModel}"> <View:WizardLessonTimesPageView /> </DataTemplate> <DataTemplate DataType="{x:Type ViewModel:WizardTimeTablePageViewModel}"> <View:WizardTimeTablePageView /> </DataTemplate> <DataTemplate DataType="{x:Type ViewModel:WizardFinishPageViewModel}"> <View:WizardFinishPageView /> </DataTemplate>  <Style BasedOn="{StaticResource {x:Type Button}}" TargetType="{x:Type Button}" x:Key="moveNextButtonStyle"> <Setter Property="Content" Value="Next" /> <Style.Triggers> <DataTrigger Binding="{Binding Path=IsOnLastPage}" Value="True"> <Setter Property="Content" Value="Finish}" /> </DataTrigger> </Style.Triggers> </Style> <ViewModel:WizardMainViewModel x:Key="WizardMainViewModelID" /> </UserControl.Resources> <Grid DataContext="{Binding ., Source={StaticResource WizardMainViewModelID}}" > <Grid.RowDefinitions> <RowDefinition Height="310*" /> <RowDefinition Height="51*" /> </Grid.RowDefinitions>  <Grid Grid.Row="0" Background="LightGoldenrodYellow"> <HeaderedContentControl Content="{Binding CurrentPage}" Header="{Binding Path=CurrentPage.DisplayName}" /> </Grid>  <Grid Grid.Row="1" Background="Aquamarine"> <StackPanel HorizontalAlignment="Center" Orientation="Horizontal"> <Button Command="{Binding MovePreviousCommand}" Content="Previous" /> <Button Command="{Binding MoveNextCommand}" Style="{StaticResource moveNextButtonStyle}" Content="Next" /> <Button Command="{Binding CancelCommand}" Content="Cancel" /> </StackPanel> </Grid> </Grid>

Read the article

Programming an Android Button to update EditText views

- by bergler77

Ok guys, I have a button in android that i'm trying to use to update 8 EditText Views with different random numbers. Everything works up until I click the button. It appears I am missing a resource according to the debugger, but I'm not sure what. I've tried several different ways of implementing the button. Here is what I have after looking at several posts. import java.util.Random; import android.os.Bundle; import android.view.View; import android.view.View.OnClickListener; import android.widget.Button; import android.widget.EditText; public class MyCharNewChar extends MyCharActivity { private OnClickListener randomButtonListener = new OnClickListener(){ public void onClick(View v) { //Button creates a set of random numbers and updates the values //of the EditText views. Random rand = new Random(); int STR = 1 + rand.nextInt(12); int AGI = 1 + rand.nextInt(12); int DEX = 1 + rand.nextInt(12); int WIS = 1 + rand.nextInt(12); int INT = 1 + rand.nextInt(12); int CON = 1 + rand.nextInt(12); int HP = 1 + rand.nextInt(20); int AC = 1 + rand.nextInt(6); EditText str = (EditText) findViewById(R.id.str); str.setText(STR); EditText agi = (EditText) findViewById(R.id.agi); agi.setText(AGI); EditText dex = (EditText) findViewById(R.id.dex); dex.setText(DEX); EditText wis = (EditText) findViewById(R.id.wis); wis.setText(WIS); EditText intel = (EditText) findViewById(R.id.intel); intel.setText(INT); EditText con = (EditText) findViewById(R.id.con); con.setText(CON); EditText hp = (EditText) findViewById(R.id.baseHP); hp.setText(HP); EditText ac = (EditText) findViewById(R.id.baseAC); ac.setText(AC); } }; @Override public void onCreate(Bundle savedInstanceState){ super.onCreate(savedInstanceState); setContentView(R.layout.newchar); Button randomButton = (Button) findViewById(R.id.randomButton); randomButton.setOnClickListener(randomButtonListener); } } Here is the xml: <?xml version="1.0" encoding="utf-8"?> <LinearLayout xmlns:android="http://schemas.android.com/apk/res/android" android:id="@+id/linearlayoutNew1" android:layout_width="match_parent" android:layout_height="match_parent" android:orientation="vertical" android:background="@drawable/background" > <TextView android:id="@+id/newCharLabel" android:layout_width="match_parent" android:layout_height="wrap_content" android:text="@string/new_character_screen" android:textSize="24dp" android:textColor="@color/splash" android:textStyle="bold" android:gravity="center"/> <TextView android:id="@+id/nameLabel" android:layout_width="match_parent" android:layout_height="wrap_content" android:text="@string/nameLabel" android:textSize="18dp" android:textColor="@color/splash"/> <EditText android:id="@+id/editText1" android:layout_width="match_parent" android:layout_height="wrap_content" android:ems="10" android:inputType="textPersonName" > <requestFocus /> </EditText> <TableLayout android:id="@+id/statsLayout" android:layout_width="match_parent" android:layout_height="wrap_content" android:padding="5dp"> <TableRow android:id="@+id/tableRow01" android:orientation="horizontal" android:layout_width="match_parent" android:layout_height="wrap_content" android:padding="5dp"> <TextView android:id="@+id/strLabel" android:layout_width="wrap_content" android:layout_height="wrap_content" android:text="@string/strLabel" android:textSize="18dp" android:textColor="@color/splash"/> <EditText android:id="@+id/str" android:layout_width="wrap_content" android:layout_height="wrap_content" android:ems="3" android:inputType="number" /> <TextView android:id="@+id/agiLabel" android:layout_width="wrap_content" android:layout_height="wrap_content" android:text="@string/agiLabel" android:textSize="18dp" android:textColor="@color/splash"/> <EditText android:id="@+id/agi" android:layout_width="wrap_content" android:layout_height="wrap_content" android:ems="3" android:inputType="number"/> <TextView android:id="@+id/dexLabel" android:layout_width="wrap_content" android:layout_height="wrap_content" android:text="@string/dexLabel" android:textSize="18dp" android:textColor="@color/splash"/> <EditText android:id="@+id/dex" android:layout_width="wrap_content" android:layout_height="wrap_content" android:ems="3" android:inputType="number"/> </TableRow> <TableRow android:id="@+id/tableRow02" android:orientation="horizontal" android:layout_width="match_parent" android:layout_height="wrap_content" android:padding="5dp"> <TextView android:id="@+id/intLabel" android:layout_width="wrap_content" android:layout_height="wrap_content" android:text="@string/intLabel" android:textSize="18dp" android:textColor="@color/splash"/> <EditText android:id="@+id/intel" android:layout_width="wrap_content" android:layout_height="wrap_content" android:ems="3" android:inputType="number"/> <TextView android:id="@+id/wisLabel" android:layout_width="wrap_content" android:layout_height="wrap_content" android:text="@string/wisLabel" android:textSize="18dp" android:textColor="@color/splash"/> <EditText android:id="@+id/wis" android:layout_width="wrap_content" android:layout_height="wrap_content" android:ems="3" android:inputType="number"/> <TextView android:id="@+id/conLabel" android:layout_width="wrap_content" android:layout_height="wrap_content" android:text="@string/conLabel" android:textSize="18dp" android:textColor="@color/splash"/> <EditText android:id="@+id/con" android:layout_width="wrap_content" android:layout_height="wrap_content" android:ems="3" android:inputType="number"/> </TableRow> </TableLayout> <LinearLayout android:id="@+id/linearlayoutNew02" android:layout_width="match_parent" android:layout_height="wrap_content" android:padding="5dp" android:gravity="center"> <TextView android:id="@+id/baseHPLabel" android:layout_width="wrap_content" android:layout_height="wrap_content" android:text="@string/hpLabel" android:textSize="18dp" android:textColor="@color/splash"/> <EditText android:id="@+id/baseHP" android:layout_width="wrap_content" android:layout_height="wrap_content" android:ems="3" android:inputType="number"/> <TextView android:id="@+id/baseACLabel" android:layout_width="wrap_content" android:layout_height="wrap_content" android:text="@string/acLabel" android:textSize="18dp" android:textColor="@color/splash"/> <EditText android:id="@+id/baseAC" android:layout_width="wrap_content" android:layout_height="wrap_content" android:ems="3" android:inputType="number"/> </LinearLayout> <LinearLayout android:id="@+id/linearlayoutNew03" android:layout_width="match_parent" android:layout_height="wrap_content" android:orientation="horizontal"> <Button android:id="@+id/randomButton" android:layout_width="0dp" android:layout_height="wrap_content" android:layout_weight="1" android:text="@string/randomButton" android:textSize="16dp" android:clickable="true"/> </LinearLayout> </LinearLayout> I have also tried setting the onClick in xml to setup a specific onClick method. Still the same error so I must have a problem elsewhere. Any suggestions would be great!

Read the article

Why won't Javascript assembled Iframe load in IE6 over HTTPS although it will over HTTP?

- by Lauren

The issue: The iframe won't load inside the tags on the review and submit page here: https://checkout.netsuite.com/s.nl/c.659197/sc.4/category.confirm/.f Login:[email protected] pass:test03 To produce problem: - Where it says "Your Third Party Shipper Numbers (To enter one, click here.)", click "here" to see the form that won't load in IE6. It seems to load in every other modern browser. The same form works fine on this page (you have to click on the "order sample" button to see the link to the same form): http://www.avaline.com/R3000_3 Here's the HTML: <div style="border-color: rgb(255, 221, 221);" id="itmSampl"> <div id="placeshipnum" style="display: none;"></div> <div id="sampAdd"> <strong>Your Third Party Shipper Numbers</strong> (To enter one, click <a rel="nofollow" href="javascript:;" onclick="enterShipNum()">here</a>.) <ul style="list-style: none outside none; padding-left: 20px;"> <li><span class="bold">UPS #</span>: 333333</li> <li><span class="bold">FedEx #</span>: 777888999</li> </ul> </div> </div> Upon clicking the "to enter one, click here" link this is the iframe HTML in all browsers except IE6 (in IE6, the "shipnum" div element is assembled, but that's it): <div id="placeshipnum" style="display: block;"> <div id="shipnum" style="background: none repeat scroll 0% 0% rgb(255, 255, 255);"> <div class="wrapper-x"> <a title="close window" class="linkfooter" href="javascript:;" onclick="enterShipNum()"> <img height="11" width="11" alt="close window" src="/c.659197/site/av-template/x-image-browser.gif"> </a> </div> <iframe scrolling="no" height="240" frameborder="0" width="190" src="https://forms.netsuite.com/app/site/crm/externalleadpage.nl?compid=659197&formid=56&h=9b260d2f9bca0fd9c300&[email protected]&firstname=Test&lastname=Account&ck=Q1BnzaRXAe_RfjhE&vid=Q1BnzaRXAd3Rfik7&cktime=87919&cart=5257&promocode=SAMPLE&chrole=1014&cjsid=0a0102621f435ef0d0d4b3cd49ab8b2db4e253c671eb" allowtransparency="true" border="0" onload="hideShipLoadImg()" style="display: block;"></iframe></div></div> This is the relevant Javascript: // Allow for shipper number update var shipNumDisplay=0; function enterShipNum() { if (shipNumDisplay == 0){ //odrSampl(); document.getElementById('placeshipnum').style.display="block"; document.getElementById('placeshipnum').innerHTML='<div id="shipnum"><div class="wrapper-x"> <a onclick="enterShipNum()" href="javascript:;" class="linkfooter" title="close window"> <img height="11" width="11" src="/c.659197/site/av-template/x-image-browser.gif" alt="close window" /> </a> </div><iframe onload="hideShipLoadImg()" scrolling="no" height="240" frameborder="0" width="190" border="0" allowtransparency="true" src="https://forms.netsuite.com/app/site/crm/externalleadpage.nl?compid=659197&formid=56&h=9b260d2f9bca0fd9c300&[email protected]&firstname=Test&lastname=Account&ck=Q1BnzaRXAe_RfjhE&vid=Q1BnzaRXAd3Rfik7&cktime=87919&cart=5257&promocode=SAMPLE&chrole=1014&cjsid=0a0102621f435ef0d0d4b3cd49ab8b2db4e253c671eb"></iframe></div>'; shipNumDisplay=1; } else { document.getElementById('placeshipnum').style.display="none"; document.getElementById('shipnum').parentNode.removeChild(document.getElementById('shipnum')); shipNumDisplay=0; } } function hideShipLoadImg(){ var shipiframe= document.getElementById('shipnum').getElementsByTagName('iframe')[0]; shipiframe.style.display = 'block'; shipiframe.parentNode.style.background = '#fff'; } This is most of the form inside the iframe although I don't think it's relevant: <form style="margin: 0pt;" onsubmit="return ( window.isinited && window.isvalid && save_record( true ) )" action="/app/site/crm/externalleadpage.nl" enctype="multipart/form-data" method="POST" name="main_form" id="main_form"> <div class="field name"> <label for="firstname">First Name <span class="required">*</span></label> <span class="input" id="firstname_fs"><span class="input" id="firstname_val">Test</span></span><input type="hidden" id="firstname" name="firstname" value="Test" onchange="nlapiFieldChanged(null,'firstname');"> </div> <div class="field name"> <label for="lastname">Last Name <span class="required">*</span></label> <span class="input" id="lastname_fs"><span class="input" id="lastname_val">Account</span></span><input type="hidden" id="lastname" name="lastname" value="Account" onchange="nlapiFieldChanged(null,'lastname');"> </div> <div id="ups" class="field"> <label for="custentity4">UPS # </label> <span id="custentity4_fs" style="white-space: nowrap;"><input type="text" id="custentity4" onblur="if (this.checkvalid == true) {this.isvalid=(validate_field(this,'text',false,false) && nlapiValidateField(null,'custentity4'));} if (this.isvalid == false) { selectAndFocusField(this); return this.isvalid;}" name="custentity4" size="25" onfocus="if (this.isvalid == true || this.isvalid == false) this.checkvalid=true;" onchange="setWindowChanged(window, true);this.isvalid=(validate_field(this,'text',true,false) && nlapiValidateField(null,'custentity4'));this.checkvalid=false;if (this.isvalid) {nlapiFieldChanged(null,'custentity4');;}if (this.isvalid) this.isvalid=validate_textfield_maxlen(this,6,true,true);if (!this.isvalid) { selectAndFocusField(this);}return this.isvalid;" class="input" maxlength="6"></span> </div> <div id="fedex" class="field"> <label for="custentity9">FedEx # </label> <span id="custentity9_fs" style="white-space: nowrap;"><input type="text" id="custentity9" onblur="if (this.checkvalid == true) {this.isvalid=(validate_field(this,'text',false,false) && nlapiValidateField(null,'custentity9'));} if (this.isvalid == false) { selectAndFocusField(this); return this.isvalid;}" name="custentity9" size="25" onfocus="if (this.isvalid == true || this.isvalid == false) this.checkvalid=true;" onchange="setWindowChanged(window, true);this.isvalid=(validate_field(this,'text',true,false) && nlapiValidateField(null,'custentity9'));this.checkvalid=false;if (this.isvalid) {nlapiFieldChanged(null,'custentity9');;}if (this.isvalid) this.isvalid=validate_textfield_maxlen(this,9,true,true);if (!this.isvalid) { selectAndFocusField(this);}return this.isvalid;" class="input" maxlength="9"></span> </div> <div class="field hidden"><input type="hidden" id="email" name="email" value="[email protected]"></div> <div class="field"><label class="submit" for="submitbutton"><span class="required">*</span> Indicates required fields.</label></div> <input type="submit" id="submitbutton" value="submit">  <input type="hidden" value="659197" name="compid"><input type="hidden" value="56" name="formid"><input type="hidden" value="" name="id"><input type="hidden" value="9b260d2f9bca0fd9c300" name="h"><input type="hidden" value="-1" name="rectype"><input type="hidden" value="" name="nlapiPI"><input type="hidden" value="" name="nlapiSR"><input type="hidden" value="ShipValidateField" name="nlapiVF"><input type="hidden" value="" name="nlapiFC"><input type="hidden" value="/app/site/crm/externalleadpage.nl?compid=659197&formid=56&h=9b260d2f9bca0fd9c300&[email protected]&firstname=Test&lastname=Account&ck=Q1BnzaRXAe_RfjhE&vid=Q1BnzaRXAd3Rfik7&cktime=87919&cart=5257&promocode=SAMPLE&chrole=1014&cjsid=0a0102621f435ef0d0d4b3cd49ab8b2db4e253c671eb" name="whence"><input type="hidden" name="submitted"> <iframe height="0" style="visibility: hidden;" name="server_commands" id="server_commands" src="javascript:false"></iframe>  </form>

Read the article

Issue with Multiple ModalPopups, ValidationSummary and UpdatePanels

- by Aaron Hoffman

I am having an issue when a page contains multiple ModalPopups each containing a ValidationSummary Control. Here is the functionality I need: A user clicks a button and a Modal Popup appears with dynamic content based on the button that was clicked. (This functionality is working. Buttons are wrapped in UpdatePanels and the partial page postback calls .Show() on the ModalPopup) "Save" button in ModalPopup causes client side validation, then causes a full page postback so the entire ModalPopup disappears. (ModalPopup could disappear another way - the ModalPopup just needs to disappear after a successful save operation) If errors occur in the codebehind during Save operation, messages are added to the ValidationSummary (contained within the ModalPopup) and the ModalPopup is displayed again. When the ValidationSummary's are added to the PopupPanel's, the ModalPopups no longer display correctly after a full page postback caused by the "Save" button within the second PopupPanel. (the first panel continues to function correctly) Both PopupPanels are displayed, and neither is "Popped-Up", they are displayed in-line. Any ideas on how to solve this? Image of Error State (after "PostBack Popup2" button has been clicked) ASPX markup <asp:ScriptManager ID="ScriptManager1" runat="server"> </asp:ScriptManager> <%--********************************************************************* Popup1 *********************************************************************--%> <asp:UpdatePanel ID="Popup1ShowButtonUpdatePanel" runat="server"> <ContentTemplate> <%--This button will cause a partial page postback and pass a parameter to the Popup1ModalPopup in code behind and call its .Show() method to make it visible--%> <asp:Button ID="Popup1ShowButton" runat="server" Text="Show Popup1" OnClick="Popup1ShowButton_Click" CommandArgument="1" /> </ContentTemplate> </asp:UpdatePanel> <%--Hidden Control is used as ModalPopup's TargetControlID .Usually this is the ID of control that causes the Popup, but we want to control the modal popup from code behind --%> <asp:HiddenField ID="Popup1ModalPopupTargetControl" runat="server" /> <ajax:ModalPopupExtender ID="Popup1ModalPopup" runat="server" TargetControlID="Popup1ModalPopupTargetControl" PopupControlID="Popup1PopupControl" CancelControlID="Popup1CancelButton"> </ajax:ModalPopupExtender> <asp:Panel ID="Popup1PopupControl" runat="server" CssClass="ModalPopup" Style="width: 600px; background-color: #FFFFFF; border: solid 1px #000000;"> <%--This button causes validation and a full-page post back. Full page postback will causes the ModalPopup to be Hid. If there are errors in code behind, the code behind will add a message to the ValidationSummary, and make the ModalPopup visible again--%> <asp:Button ID="Popup1PostBackButton" runat="server" Text="PostBack Popup1" OnClick="Popup1PostBackButton_Click" />  <asp:Button ID="Popup1CancelButton" runat="server" Text="Cancel Popup1" /> <asp:UpdatePanel ID="Popup1UpdatePanel" runat="server"> <ContentTemplate> <%--*************ISSUE HERE*************** The two ValidationSummary's are causing an issue. When the second ModalPopup's PostBack button is clicked, Both ModalPopup's become visible, but neither are "Popped-Up". If ValidationSummary's are removed, both ModalPopups Function Correctly--%> <asp:ValidationSummary ID="Popup1ValidationSummary" runat="server" /> <%--Will display dynamically passed paramter during partial page post-back--%> Popup1 Parameter:<asp:Literal ID="Popup1Parameter" runat="server"></asp:Literal><br /> </ContentTemplate> </asp:UpdatePanel>  <br />  <br />  <br /> </asp:Panel>  <br />  <br />  <br /> <%--********************************************************************* Popup2 *********************************************************************--%> <asp:UpdatePanel ID="Popup2ShowButtonUpdatePanel" runat="server"> <ContentTemplate> <%--This button will cause a partial page postback and pass a parameter to the Popup2ModalPopup in code behind and call its .Show() method to make it visible--%> <asp:Button ID="Popup2ShowButton" runat="server" Text="Show Popup2" OnClick="Popup2ShowButton_Click" CommandArgument="2" /> </ContentTemplate> </asp:UpdatePanel> <%--Hidden Control is used as ModalPopup's TargetControlID .Usually this is the ID of control that causes the Popup, but we want to control the modal popup from code behind --%> <asp:HiddenField ID="Popup2ModalPopupTargetControl" runat="server" /> <ajax:ModalPopupExtender ID="Popup2ModalPopup" runat="server" TargetControlID="Popup2ModalPopupTargetControl" PopupControlID="Popup2PopupControl" CancelControlID="Popup2CancelButton"> </ajax:ModalPopupExtender> <asp:Panel ID="Popup2PopupControl" runat="server" CssClass="ModalPopup" Style="width: 600px; background-color: #FFFFFF; border: solid 1px #000000;"> <%--This button causes validation and a full-page post back. Full page postback will causes the ModalPopup to be Hid. If there are errors in code behind, the code behind will add a message to the ValidationSummary, and make the ModalPopup visible again--%> <asp:Button ID="Popup2PostBackButton" runat="server" Text="PostBack Popup2" OnClick="Popup2PostBackButton_Click" />  <asp:Button ID="Popup2CancelButton" runat="server" Text="Cancel Popup2" /> <asp:UpdatePanel ID="Popup2UpdatePanel" runat="server"> <ContentTemplate> <%--*************ISSUE HERE*************** The two ValidationSummary's are causing an issue. When the second ModalPopup's PostBack button is clicked, Both ModalPopup's become visible, but neither are "Popped-Up". If ValidationSummary's are removed, both ModalPopups Function Correctly--%> <asp:ValidationSummary ID="Popup2ValidationSummary" runat="server" /> <%--Will display dynamically passed paramter during partial page post-back--%> Popup2 Parameter:<asp:Literal ID="Popup2Parameter" runat="server"></asp:Literal><br /> </ContentTemplate> </asp:UpdatePanel>  <br />  <br />  <br /> </asp:Panel> Code Behind protected void Popup1ShowButton_Click(object sender, EventArgs e) { Button btn = sender as Button; //Dynamically pass parameter to ModalPopup during partial page postback Popup1Parameter.Text = btn.CommandArgument; Popup1ModalPopup.Show(); } protected void Popup1PostBackButton_Click(object sender, EventArgs e) { //if there is an error, add a message to the validation summary and //show the ModalPopup again //TODO: add message to validation summary //show ModalPopup after page refresh (request/response) Popup1ModalPopup.Show(); } protected void Popup2ShowButton_Click(object sender, EventArgs e) { Button btn = sender as Button; //Dynamically pass parameter to ModalPopup during partial page postback Popup2Parameter.Text = btn.CommandArgument; Popup2ModalPopup.Show(); } protected void Popup2PostBackButton_Click(object sender, EventArgs e) { //***********After This is when the issue appears********************** //if there is an error, add a message to the validation summary and //show the ModalPopup again //TODO: add message to validation summary //show ModalPopup after page refresh (request/response) Popup2ModalPopup.Show(); }

Read the article

WPF Button Image only showing in last control

- by Ryan

Hello All! I am fairly new to WPF and am probably missing something simple here. If I have 3 controls, only the last control will show the OriginalImage that I specify. Any help would be most appreciated. Thanks Ryan Main Window <Grid> <Grid.RowDefinitions> <RowDefinition Height="200*"/> <RowDefinition Height="60" /> </Grid.RowDefinitions> <Grid.ColumnDefinitions> <ColumnDefinition Width="85" /> <ColumnDefinition Width="85" /> <ColumnDefinition Width="85" /> <ColumnDefinition Width="85" /> <ColumnDefinition Width="300" /> </Grid.ColumnDefinitions> <Grid Grid.Row="1"> <but:ListButton OriginalImage="/CustomItemsPanel;component/ListBox/Images/add.png" DisableImage="/CustomItemsPanel;component/ListBox/Images/addunselect.png" /> </Grid > <Grid Grid.Row="1" Grid.Column="1" > <but:ListButton OriginalImage="/CustomItemsPanel;component/ListBox/Images/add.png" DisableImage="/CustomItemsPanel;component/ListBox/Images/addunselect.png" /> </Grid > <Grid Grid.Row="1" Grid.Column="2" > <but:ListButton OriginalImage="/CustomItemsPanel;component/ListBox/Images/add.png" DisableImage="/CustomItemsPanel;component/ListBox/Images/addunselect.png" /> </Grid> </Grid> Control XAML <ResourceDictionary xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:local="clr-namespace:CustomItemsPanel.ListButton"> <LinearGradientBrush x:Key="ButtonBackground" EndPoint="0.5,1" StartPoint="0.5,0"> <LinearGradientBrush.GradientStops> <GradientStop Color="#FF0E3D70"/> <GradientStop Color="#FF001832" Offset="1"/> </LinearGradientBrush.GradientStops> </LinearGradientBrush> <LinearGradientBrush x:Key="ButtonBackgroundMouseOver" EndPoint="0.5,1" StartPoint="0.5,0"> <LinearGradientBrush.GradientStops> <GradientStop Color="#FF1E62A1" /> <GradientStop Color="#FF0A3C6D" Offset="1"/> </LinearGradientBrush.GradientStops> </LinearGradientBrush> <LinearGradientBrush x:Key="ButtonBackgroundSelected" EndPoint="0.5,1" StartPoint="0.5,0"> <LinearGradientBrush.GradientStops> <GradientStop Color="Red" /> <GradientStop Color="#FF0A2A4C" Offset="1"/> </LinearGradientBrush.GradientStops> </LinearGradientBrush> <Style x:Key="Toggle" TargetType="{x:Type Button}"> <Setter Property="Content"> <Setter.Value> <Image> <Image.Style> <Style TargetType="{x:Type Image}"> <Setter Property="Source" Value="{Binding RelativeSource={RelativeSource FindAncestor, AncestorType={x:Type local:ListButton}}, Path=OriginalImage}"/> <Style.Triggers> <Trigger Property="IsEnabled" Value="False"> <Setter Property="Source" Value="{Binding Path=DisableImage, RelativeSource={RelativeSource TemplatedParent}}"/> </Trigger> </Style.Triggers> </Style> </Image.Style> </Image> </Setter.Value> </Setter> <Setter Property="Template"> <Setter.Value> <ControlTemplate TargetType="{x:Type Button}"> <Grid Cursor="Hand"> <Border Name="back" Margin="0,1,0,0" Background="{StaticResource ButtonBackground}"> <ContentPresenter VerticalAlignment="Center" HorizontalAlignment="Center" x:Name="content" /> </Border> <Border BorderThickness="1" BorderBrush="#FF004F92"> <Border BorderThickness="0,0,1,0" BorderBrush="#FF101D29" /> </Border> </Grid> <ControlTemplate.Triggers> <Trigger Property="IsMouseOver" Value="True" > <Setter TargetName="back" Property="Background" Value="{StaticResource ButtonBackgroundMouseOver}"/> </Trigger> </ControlTemplate.Triggers> </ControlTemplate> </Setter.Value> </Setter> </Style> <Style TargetType="{x:Type local:ListButton}"> <Setter Property="Template"> <Setter.Value> <ControlTemplate TargetType="{x:Type local:ListButton}"> <Button Style="{StaticResource Toggle}" /> </ControlTemplate> </Setter.Value> </Setter> </Style> </ResourceDictionary> Control Code Behind public class ListButton : Control { public static readonly DependencyProperty MouseOverImageProperty; public static readonly DependencyProperty OriginalImageProperty; public static readonly DependencyProperty DisableImageProperty; static ListButton() { DefaultStyleKeyProperty.OverrideMetadata(typeof(ListButton), new FrameworkPropertyMetadata(typeof(ListButton))); MouseOverImageProperty = DependencyProperty.Register("MouseOverImage", typeof(ImageSource), typeof(ListButton), new UIPropertyMetadata(null)); OriginalImageProperty = DependencyProperty.Register("OriginalImage", typeof(ImageSource), typeof(ListButton), new UIPropertyMetadata(null)); DisableImageProperty = DependencyProperty.Register("DisableImage", typeof(ImageSource), typeof(ListButton), new UIPropertyMetadata(null)); } public ImageSource MouseOverImage { get { return (ImageSource)GetValue(MouseOverImageProperty); } set { SetValue(MouseOverImageProperty, value); } } public ImageSource OriginalImage { get { return (ImageSource)GetValue(OriginalImageProperty); } set { SetValue(OriginalImageProperty, value); } } public ImageSource DisableImage { get { return (ImageSource)GetValue(DisableImageProperty); } set { SetValue(DisableImageProperty, value); } } }

Read the article

Choose variable based on users choice from picklist.

- by Kelbizzle

I have this form. Basically what I want is to send a auto-response with a different URL based on what the user picks in the "attn" picklist. I've been thinking I could have a different variable for each drop down value. It will then pass this variable on to the mail script that will choose which URL to insert inside the auto response that is sent. It gives me a headache thinking about it sometimes. What's the easiest way to accomplish this? Am I making more work for myself? I really don't know because I'm no programmer. Thanks in advance! Here is the form: <form name="contact_form" method="post" action="sendemail_reports.php" onsubmit="return validate_form ( );"> <div id='zohoWebToLead' align=center> <table width="100%" border="0" align="center" cellpadding="0" cellspacing="0" class="txt_body"> <table border=0 cellspacing=0 cellpadding=5 width=480 style='border-bottom-color: #999999; border-top-color: #999999; border-bottom-style: none; border-top-style: none; border-bottom-width: 1px; border-top-width: 2px; background-color:transparent;'> <tr> <td width='75%'><table width=480 border=0 cellpadding=5 cellspacing=0 style='border-bottom-color: #999999; border-top-color: #999999; border-bottom-style: none; border-top-style: none; border-bottom-width: 1px; border-top-width: 2px; background-color:transparent;'> <input type="hidden" name="ip" value="'.$ipi.'" /> <input type="hidden" name="httpref" value="'.$httprefi.'" /> <input type="hidden" name="httpagent" value="'.$httpagenti.'" /> <tr></tr> <tr> <td colspan='2' align='left' style='border-bottom-color: #dadada; border-bottom-style: none; border-bottom-width: 2px; color:#000000; font-family:sans-serif; font-size:14px;'><strong>Send us an Email</strong></td> </tr> <tr> <td nowrap style='font-family:sans-serif;font-size:12px;font-weight:bold' align='right' width='25%'> First Name : </td> <td width='75%'><input name='visitorf' type='text' size="48" maxlength='40' /></td> </tr> <tr> <td nowrap style='font-family:sans-serif;font-size:12px;font-weight:bold' align='right' width='25%'>Last Name :</td> <td width='75%'><input name='visitorfl' type='text' size="48" maxlength='80' /></td> </tr> <tr> <td nowrap style= 'font-family:sans-serif;font-size:12px;font-weight:bold' align='right' width='25%'> Email Adress : </td> <td width='75%'><input name='visitormail' type='text' size="48" maxlength='100' /></td> </tr> <tr> <td nowrap style='font-family:sans-serif;font-size:12px;font-weight:bold' align='right' width='25%'> Phone : </td> <td width='75%'><input name='visitorphone' type='text' size="48" maxlength='30' /></td> </tr> <td nowrap style='font-family:sans-serif;font-size:12px;font-weight:bold' align='right' width='25%'> Subject : </td> <td width='75%'><select name="attn" size="1"> <option value=" Investment Opportunities ">Investment Opportunities </option> <option value=" Vacation Rentals ">Vacation Rentals </option> <option value=" Real Estate Offerings ">Real Estate Offerings </option> <option value=" Gatherings ">Gatherings </option> <option value=" General ">General </option> </select></td> <tr> <td nowrap style= 'font-family:sans-serif;font-size:12px;font-weight:bold' align='right' width='25%'> Message :<br /> <em>(max 5000 char)</em></td> <td width='75%'><textarea name='notes' maxlength='5000' cols="48" rows="3"></textarea></td> </tr> <tr> <td colspan=2 align=center style=''><input name='save' type='submit' class="boton" value=Send mail />     <input type='reset' name='reset' value=Reset class="boton" /></td> </tr> </table></td> </tr> </table> </div> </form> Here is the mail script: <?php //the 3 variables below were changed to use the SERVER variable $ip = $_SERVER['REMOTE_ADDR']; $httpref = $_SERVER['HTTP_REFERER']; $httpagent = $_SERVER['HTTP_USER_AGENT']; $visitorf = $_POST['visitorf']; $visitorl = $_POST['visitorl']; $visitormail = $_POST['visitormail']; $visitorphone = $_POST['visitorphone']; $notes = $_POST['notes']; $attn = $_POST['attn']; //additional headers $headers = 'From: Me <[email protected]>' . "\n" ; $headers = 'Bcc: [email protected]' . "\n"; if (eregi('http:', $notes)) { die ("Do NOT try that! ! "); } if(!$visitormail == "" && (!strstr($visitormail,"@") || !strstr($visitormail,"."))) { echo "<h2>Use Back - Enter valid e-mail</h2>\n"; $badinput = "<h2>Feedback was NOT submitted</h2>\n"; echo $badinput; die ("Go back! ! "); } if(empty($visitorf) || empty($visitormail) || empty($notes )) { echo "<h2>Use Back - fill in all fields</h2>\n"; die ("Use back! ! "); } $todayis = date("l, F j, Y, g:i a") ; $subject = "I want to download the report about $attn"; $notes = stripcslashes($notes); $message = "$todayis [EST] \nAttention: $attn \nMessage: $notes \nFrom: $visitorf $visitorl ($visitormail) \nTelephone Number: $visitorphone \nAdditional Info : IP = $ip \nBrowser Info: $httpagent \nReferral : $httpref\n"; //check if the function even exists if(function_exists("mail")) { //send the email mail($_SESSION['email'], $subject, $message, $headers) or die("could not send email"); } else { die("mail function not enabled"); } header( "Location: http://www.domain.com/thanks.php" ); ?>

Read the article

IOException: Unable To Delete Images Due To File Lock

- by Arslan Pervaiz

I am Unable To Delete Image File From My Server Path It Gaves Error That The Process Cannot Access The File "FileName" Because it is being Used By Another Process. I Tried Many Methods But Still All In Vain. Please Help me Out in This Issue. Here is My Code Snippet. using System; using System.Data; using System.Web; using System.Data.SqlClient; using System.Web.UI; using System.Web.UI.HtmlControls; using System.Globalization; using System.Web.Security; using System.Text; using System.DirectoryServices; using System.Collections; using System.IO; using System.Drawing; using System.Drawing.Imaging; using System.Drawing.Drawing2D; //============ Main Block ================= byte[] data = (byte[])ds.Tables[0].Rows[0][0]; MemoryStream ms = new MemoryStream(data); Image returnImage = Image.FromStream(ms); returnImage.Save(Server.MapPath(".\\TmpImages\\SavedImage.jpg"), System.Drawing.Imaging.ImageFormat.Jpeg); returnImage.Dispose(); \\ I Tried this Dispose Method To Unlock The File But Nothing Done. ms.Close(); \\ I Tried The Memory Stream Close Method Also But Its Also Not Worked For Me. watermark(); \\ Here is My Water Mark Method That Print Water Mark Image on My Saved Image (Image That is Converted From Byte Array) DeleteImages(); \\ Here is My Delete Method That I Call To Delete The Images //===== ==== My Delete Method To Delete Files================== public void DeleteImages() { try { File.Delete(Server.MapPath(".\\TmpImages\\WaterMark.jpg")); \\This Image Deleted Fine. File.Delete(Server.MapPath(".\\TmpImages\\SavedImage.jpg")); \\ Exception Thrown On Deleting of This Image. } catch (Exception ex) { LogManager.LogException(ex, "Error in Deleting Images."); Master.ShowMessage(ex.Message, true); } } \ ==== Method Declartion That Make Watermark of One Image On Another Image.======= public void watermark() { //create a image object containing the photograph to watermark Image imgPhoto = Image.FromFile(Server.MapPath(".\\TmpImages\\SavedImage.jpg")); int phWidth = imgPhoto.Width; int phHeight = imgPhoto.Height; //create a Bitmap the Size of the original photograph Bitmap bmPhoto = new Bitmap(phWidth, phHeight, PixelFormat.Format24bppRgb); bmPhoto.SetResolution(imgPhoto.HorizontalResolution, imgPhoto.VerticalResolution); //load the Bitmap into a Graphics object Graphics grPhoto = Graphics.FromImage(bmPhoto); //create a image object containing the watermark Image imgWatermark = new Bitmap(Server.MapPath(".\\TmpImages\\PrintasWatermark.jpg")); int wmWidth = imgWatermark.Width; int wmHeight = imgWatermark.Height; //Set the rendering quality for this Graphics object grPhoto.SmoothingMode = SmoothingMode.AntiAlias; //Draws the photo Image object at original size to the graphics object. grPhoto.DrawImage( imgPhoto, // Photo Image object new Rectangle(0, 0, phWidth, phHeight), // Rectangle structure 0, // x-coordinate of the portion of the source image to draw. 0, // y-coordinate of the portion of the source image to draw. phWidth, // Width of the portion of the source image to draw. phHeight, // Height of the portion of the source image to draw. GraphicsUnit.Pixel); // Units of measure //------------------------------------------------------- //to maximize the size of the Copyright message we will //test multiple Font sizes to determine the largest posible //font we can use for the width of the Photograph //define an array of point sizes you would like to consider as possiblities //------------------------------------------------------- //Define the text layout by setting the text alignment to centered StringFormat StrFormat = new StringFormat(); StrFormat.Alignment = StringAlignment.Center; //define a Brush which is semi trasparent black (Alpha set to 153) SolidBrush semiTransBrush2 = new SolidBrush(Color.FromArgb(153, 0, 0, 0)); //define a Brush which is semi trasparent white (Alpha set to 153) SolidBrush semiTransBrush = new SolidBrush(Color.FromArgb(153, 255, 255, 255)); //------------------------------------------------------------ //Step #2 - Insert Watermark image //------------------------------------------------------------ //Create a Bitmap based on the previously modified photograph Bitmap Bitmap bmWatermark = new Bitmap(bmPhoto); bmWatermark.SetResolution(imgPhoto.HorizontalResolution, imgPhoto.VerticalResolution); //Load this Bitmap into a new Graphic Object Graphics grWatermark = Graphics.FromImage(bmWatermark); //To achieve a transulcent watermark we will apply (2) color //manipulations by defineing a ImageAttributes object and //seting (2) of its properties. ImageAttributes imageAttributes = new ImageAttributes(); //The first step in manipulating the watermark image is to replace //the background color with one that is trasparent (Alpha=0, R=0, G=0, B=0) //to do this we will use a Colormap and use this to define a RemapTable ColorMap colorMap = new ColorMap(); //My watermark was defined with a background of 100% Green this will //be the color we search for and replace with transparency colorMap.OldColor = Color.FromArgb(255, 0, 255, 0); colorMap.NewColor = Color.FromArgb(0, 0, 0, 0); ColorMap[] remapTable = { colorMap }; imageAttributes.SetRemapTable(remapTable, ColorAdjustType.Bitmap); //The second color manipulation is used to change the opacity of the //watermark. This is done by applying a 5x5 matrix that contains the //coordinates for the RGBA space. By setting the 3rd row and 3rd column //to 0.3f we achive a level of opacity float[][] colorMatrixElements = { new float[] {1.0f, 0.0f, 0.0f, 0.0f, 0.0f}, new float[] {0.0f, 1.0f, 0.0f, 0.0f, 0.0f}, new float[] {0.0f, 0.0f, 1.0f, 0.0f, 0.0f}, new float[] {0.0f, 0.0f, 0.0f, 0.3f, 0.0f}, new float[] {0.0f, 0.0f, 0.0f, 0.0f, 1.0f}}; ColorMatrix wmColorMatrix = new ColorMatrix(colorMatrixElements); imageAttributes.SetColorMatrix(wmColorMatrix, ColorMatrixFlag.Default, ColorAdjustType.Bitmap); //For this example we will place the watermark in the upper right //hand corner of the photograph. offset down 10 pixels and to the //left 10 pixles int xPosOfWm = ((phWidth - wmWidth) - 10); int yPosOfWm = 10; grWatermark.DrawImage(imgWatermark, new Rectangle(xPosOfWm, yPosOfWm, wmWidth, wmHeight), //Set the detination Position 0, // x-coordinate of the portion of the source image to draw. 0, // y-coordinate of the portion of the source image to draw. wmWidth, // Watermark Width wmHeight, // Watermark Height GraphicsUnit.Pixel, // Unit of measurment imageAttributes); //ImageAttributes Object //Replace the original photgraphs bitmap with the new Bitmap imgPhoto = bmWatermark; grPhoto.Dispose(); grWatermark.Dispose(); //save new image to file system. imgPhoto.Save(Server.MapPath(".\\TmpImages\\WaterMark.jpg"), ImageFormat.Jpeg); imgPhoto.Dispose(); imgWatermark.Dispose(); }

Read the article

How to find an entry-level job after you already have a graduate degree?

- by Uri

Note: I asked this question in early 2009. A couple of months later, I found a great job. I've previously updated this question with some tips for whoever ends up in a similar situation, and now cleaned it up a little for the benefit of the fresh batch of graduates. Original post: In my early 20s I abandoned a great C++ development career path in a major company to go to graduate school and get a research masters (3 years). I did another year in industrial research, and then moved to the US to attend graduate school again, getting another masters and a Ph.D in software engineering from a top school (another 6 years down the drain). I was coding the whole way throughout my degrees (core Java and Eclipse plug-ins) and working on research related to software engineering (usability of APIs). I ended up graduating the year of the recession, with a son on the way and the prospects of no healthcare. Academic jobs and industrial research jobs are quite scarce. Initially, I was naive, thinking that with my background, I could easily find a coding job. Big mistake. It turns out that I'm in a complicated position. Entry level positions are usually offered to college undergraduates. I attended my school's career fairs, but you could immediately see signs of Ph.D. aversion and overqualification issues. Some of the recruiters I spoke with explicitly told me that they wanted 20 year olds with clean slates, and some were looking for interns since they are in various forms of hiring freezes. I managed to get a couple of interviews from these career fairs and through recruiters. However, since I've been out of school for a long time and programming primarily in Java, I am also no longer proficient in C/C++ and the usual range of college-level interview questions that everyone uses. I had no problems with this when I was 19 and interviewing for my first job since a lot of what you do in C is manipulate pointers and I was coding C++ for fun and for school. Later I was routinely doing pointer manipulation on the job, and during my first masters taught college courses with data structures and C++. But even though I remember many properties of C++ well, it's been close to ten years since I regularly used C++ and pointers. As a Java developer I rarely had to work at this level, but experience in OOD and in writing good maintainable code is meaningless for C++ interviews. Reading books as a refresh and looking at sample code did not do the trick. I also looked at mid-to-senior level Java positions, but most of them focused on J2EE APIs rather than on core Java and required a certain number of years in industrial positions. Coding research tools and prior C++ experience doesn't count. So that sends me back to entry-level jobs that are posted through job-boards, and these are not common (mostly they are Monster junk), and small companies are even less likely to answer a Ph.D. compared to the giants who participate in top-10 career fairs. Even worse, in many companies initial screening is done by HR folks who really don't want to deal with anything anomalous like a Ph.D. Any tips on how I should approach this intractable position? For example, what should I write in cover letters? Note that while immigration is not an issue for me, I cannot go freelance as I need the benefits (and in particular group health insurance). During my studies I had no time to contribute to open-source projects or maintain a popular blog, so even if I invested in that now there would be no immediate benefit. Updates: In the two months after posting this I received several offers to work as a core Java developer in the financial industry and accepted one from a firm where I am working to this day. For those who find themselves in similar situations, here are my tips: Give up on trying to find an entry level positions. You can't undo time. Accept the fact that there is Ph.D. discrimination in the job market (some might say rightfully so). It is legal to discriminate based on education. No point fighting it. The most important tip is to focus on the language you are comfortable with. The sad truth about programming in a particular language is that it is not like riding a bike. If you haven't used a language in the last few years, and can't actually apply it routinely (not just as a refresher) before you start your search, it is going to be very difficult to do well in an interview. Now that I'm interviewing others, I routinely see it in folks with a mixed C++/Java background. We maintain "a shadow" of the old language but end up with a weird mix that makes it hard to interview on either. Entry-level folks are at an advantage here since they usually have one language. Memory can help you do great in a screening interview, but without recent day-to-day experience, code tests will be difficult. Despite the supposed relation, core Java programming and J2EE programming are two different things with different skillsets. If you come from academia, you likely have very little J2EE experience and may find it hard to get accepted for a J2EE job. J2EE jobs seem to have a larger list of acronyms in their requirements. In addition, from interviewing J2EE developers it seems that for many there is a focus on mastering specific APIs and architectures, whereas core Java development tends to be secondary. In the same way that I can no longer manipulate pointers well, a J2EE developer may have difficulties doing low level Java manipulation. This puts you at a relative advantage in competing for core Java jobs! If you are able to work for startups (in terms of family life and stability) or migrate to startup-rich areas such as the west coast, you can find many exciting opportunities where advanced degrees are a benefit. I've since been approached by several startups, although I had to decline. Work through a recruiter if possible. They have direct contacts with the hiring parties, allowing you to "stand out". It is better to get a clear yes/no confirmation from a recruiter on whether a company might be interested in interviewing you, than it is to send your resume and hope that someone will ever see it. Recruiters are also a great way of bypassing HR. However, also beware of recruiters. They have a vested interest and will go to various shady practices and pressure tactics. To find a good recruiter, talk to a friend who declined a job offer he got through a recruiter. A good recruiter, to me, is measured in how they handle that. Interview for the jobs that require your core strength. If you're rusty or entirely unfamiliar with a technology around which the job revolves, you're probably not a good match. Yes, you probably have the talent to master them, but most companies would want "instant gratification". I got my offers from companies that wanted core Java developer. I didn't do well on places that wanted advance C++ because I am too rusty and not up to date on recent libraries. I also didn't hear from companies that wanted lots of J2EE experience, and that's ok. Finding companies that want core Java without web is harder, but exists in specific industries (e.g., finance, defense). This requires a lot more legwork in terms of search, but these jobs do exist. There are different interview styles. Some companies focus on puzzles, some companies focus on algorithms, and some companies focus on design and coding skills. I had the most success in places where the questions were the most related to the function I would have been performing. Pick companies accordingly as well.

Read the article

I need help on my C++ assignment using Microsoft Visual C++

- by krayzwytie

Ok, so I don't want you to do my homework for me, but I'm a little lost with this final assignment and need all the help I can get. Learning about programming is tough enough, but doing it online is next to impossible for me... Now, to get to the program, I am going to paste what I have so far. This includes mostly //comments and what I have written so far. If you can help me figure out where all the errors are and how to complete the assignment, I will really appreciate it. Like I said, I don't want you to do my homework for me (it's my final), but any constructive criticism is welcome. This is my final assignment for this class and it is due tomorrow (Sunday before midnight, Arizona time). This is the assignment: Examine the following situation: Your company, Datamax, Inc., is in the process of automating its payroll systems. Your manager has asked you to create a program that calculates overtime pay for all employees. Your program must take into account the employee’s salary, total hours worked, and hours worked more than 40 in a week, and then provide an output that is useful and easily understood by company management. Compile your program utilizing the following background information and the code outline in Appendix D (included in the code section). Submit your project as an attachment including the code and the output. Company Background: Three employees: Mark, John, and Mary The end user needs to be prompted for three specific pieces of input—name, hours worked, and hourly wage. Calculate overtime if input is greater than 40 hours per week. Provide six test plans to verify the logic within the program. Plan 1 must display the proper information for employee #1 with overtime pay. Plan 2 must display the proper information for employee #1 with no overtime pay. Plans 3-6 are duplicates of plan 1 and 2 but for the other employees. Program Requirements: Define a base class to use for the entire program. The class holds the function calls and the variables related to the overtime pay calculations. Define one object per employee. Note there will be three employees. Your program must take the objects created and implement calculations based on total salaries, total hours, and the total number of overtime hours. See the Employee Summary Data section of the sample output. Logic Steps to Complete Your Program: Define your base class. Define your objects from your base class. Prompt for user input, updating your object classes for all three users. Implement your overtime pay calculations. Display overtime or regular time pay calculations. See the sample output below. Implement object calculations by summarizing your employee objects and display the summary information in the example below. And this is the code: // Final_Project.cpp : Defines the entry point for the console application. // #include "stdafx.h" #include <iostream> #include <string> #include <iomanip> using namespace std; // //CLASS DECLARATION SECTION // class CEmployee { public: void ImplementCalculations(string EmployeeName, double hours, double wage); void DisplayEmployInformation(void); void Addsomethingup (CEmployee, CEmployee, CEmployee); string EmployeeName ; int hours ; int overtime_hours ; int iTotal_hours ; int iTotal_OvertimeHours ; float wage ; float basepay ; float overtime_pay ; float overtime_extra ; float iTotal_salaries ; float iIndividualSalary ; }; int main() { system("cls"); cout << "Welcome to the Employee Pay Center"; /* Use this section to define your objects. You will have one object per employee. You have only three employees. The format is your class name and your object name. */ std::cout << "Please enter Employee's Name: "; std::cin >> EmployeeName; std::cout << "Please enter Total Hours for (EmployeeName): "; std::cin >> hours; std::cout << "Please enter Base Pay for(EmployeeName): "; std::cin >> basepay; /* Here you will prompt for the first employee’s information. Prompt the employee name, hours worked, and the hourly wage. For each piece of information, you will update the appropriate class member defined above. Example of Prompts Enter the employee name = Enter the hours worked = Enter his or her hourly wage = */ /* Here you will prompt for the second employee’s information. Prompt the employee name, hours worked, and the hourly wage. For each piece of information, you will update the appropriate class member defined above. Enter the employee name = Enter the hours worked = Enter his or her hourly wage = */ /* Here you will prompt for the third employee’s information. Prompt the employee name, hours worked, and the hourly wage. For each piece of information, you will update the appropriate class member defined above. Enter the employee name = Enter the hours worked = Enter his or her hourly wage = */ /* Here you will implement a function call to implement the employ calcuations for each object defined above. You will do this for each of the three employees or objects. The format for this step is the following: [(object name.function name(objectname.name, objectname.hours, objectname.wage)] ; */ /* This section you will send all three objects to a function that will add up the the following information: - Total Employee Salaries - Total Employee Hours - Total Overtime Hours The format for this function is the following: - Define a new object. - Implement function call [objectname.functionname(object name 1, object name 2, object name 3)] /* } //End of Main Function void CEmployee::ImplementCalculations (string EmployeeName, double hours, double wage){ //Initialize overtime variables overtime_hours=0; overtime_pay=0; overtime_extra=0; if (hours > 40) { /* This section is for the basic calculations for calculating overtime pay. - base pay = 40 hours times the hourly wage - overtime hours = hours worked – 40 - overtime pay = hourly wage * 1.5 - overtime extra pay over 40 = overtime hours * overtime pay - salary = overtime money over 40 hours + your base pay */ /* Implement function call to output the employee information. Function is defined below. */ } // if (hours > 40) else { /* Here you are going to calculate the hours less than 40 hours. - Your base pay is = your hours worked times your wage - Salary = your base pay */ /* Implement function call to output the employee information. Function is defined below. */ } // End of the else } //End of Primary Function void CEmployee::DisplayEmployInformation(); { // This function displays all the employee output information. /* This is your cout statements to display the employee information: Employee Name ............. = Base Pay .................. = Hours in Overtime ......... = Overtime Pay Amount........ = Total Pay ................. = */ } // END OF Display Employee Information void CEmployee::Addsomethingup (CEmployee Employ1, CEmployee Employ2) { // Adds two objects of class Employee passed as // function arguments and saves them as the calling object's data member values. /* Add the total hours for objects 1, 2, and 3. Add the salaries for each object. Add the total overtime hours. */ /* Then display the information below. %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %%%% EMPLOYEE SUMMARY DATA%%%%%%%%%%%%%%%%%%%%%%% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %%%% Total Employee Salaries ..... = 576.43 %%%% Total Employee Hours ........ = 108 %%%% Total Overtime Hours......... = 5 %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% */ } // End of function

Read the article

iOS TableView crash loading different data

- by jollyr0ger

Hi to all! I'm developing a simple iOS app where there is a table view with some categories (CategoryViewController). When clicking one of this category the view will be passed to a RecipesListController with another table view with recipes. This recipes are loaded from different plist based on the category clicked. The first time I click on a category, the recipes list is loaded and shown correctely. If i back to the category list and click any of the category (also the same again) the app crash. And I don't know how. The viewWillAppear is ececuted correctely but after crash. Can you help me? If you need the entire project I can zip it for you. Ok? Here is the code of the CategoryViewController.h #import <Foundation/Foundation.h> #import "RecipeRowViewController.h" @class RecipesListController; @interface CategoryViewController : UITableViewController { NSArray *recipeCategories; RecipesListController *childController; } @property (nonatomic, retain) NSArray *recipeCategories; @end The CategoryViewControoler.m #import "CategoryViewCotroller.h" #import "NavAppDelegate.h" #import "RecipesListController.h" @implementation CategoryViewController @synthesize recipeCategories; - (void)viewDidLoad { // Create the categories NSArray *array = [[NSArray alloc] initWithObjects:@"Antipasti", @"Focacce", @"Primi", @"Secondi", @"Contorni", @"Dolci", nil]; self.recipeCategories = array; [array release]; // Set background image UIImageView *bgImg = [[UIImageView alloc] initWithImage:[UIImage imageNamed:@"sfondo_app.png"]]; [self.tableView setBackgroundView:bgImg]; [bgImg release]; [self.tableView reloadData]; [super viewDidLoad]; } - (void)viewDidUnload { self.recipeCategories = nil; // [childController release]; [super viewDidUnload]; } - (void)dealloc { [recipeCategories release]; // [childController release]; [super dealloc]; } #pragma mark - #pragma mark Table data source methods - (NSInteger)tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger)section { return [recipeCategories count]; } - (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath { static NSString *CellId = @"RecipesCategoriesCellId"; // Try to reuse a cell or create a new one UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:CellId]; if (cell == nil) { cell = [[[UITableViewCell alloc] initWithStyle:UITableViewCellStyleDefault reuseIdentifier:CellId] autorelease]; } // Get the right value and assign to the cell NSUInteger row = [indexPath row]; NSString *rowString = [recipeCategories objectAtIndex:row]; cell.textLabel.text = rowString; cell.accessoryType = UITableViewCellAccessoryDisclosureIndicator; [rowString release]; return cell; } #pragma mark - #pragma mark Table view delegate methods - (void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath { if (childController == nil) { childController = [[RecipesListController alloc] initWithStyle:UITableViewStyleGrouped]; } childController.title = @"Ricette"; childController.category = [indexPath row]; [self.navigationController pushViewController:childController animated:YES]; } @end The RecipesListController.h #import <Foundation/Foundation.h> #import "RecipeRowViewController.h" #define kRecipeArrayLink 0 #define kRecipeArrayDifficulty 1 #define kRecipeArrayFoodType 2 #define kRecipeAntipasti 0 #define kRecipeFocacce 1 #define kRecipePrimi 2 #define kRecipeSecondi 3 #define kRecipeContorni 4 #define kRecipeDolci 5 @class DisclosureDetailController; @interface RecipesListController : UITableViewController { NSInteger category; NSDictionary *recipesArray; NSArray *recipesNames; NSArray *recipesLinks; DisclosureDetailController *childController; } @property (nonatomic) NSInteger category; @property (nonatomic, retain) NSDictionary *recipesArray; @property (nonatomic, retain) NSArray *recipesNames; @property (nonatomic, retain) NSArray *recipesLinks; @end The RecipesListcontroller.m #import "RecipesListController.h" #import "NavAppDelegate.h" #import "DisclosureDetailController.h" @implementation RecipesListController @synthesize category, recipesArray, recipesNames, recipesLinks; - (void)viewDidLoad { // Set background image UIImageView *bgImg = [[UIImageView alloc] initWithImage:[UIImage imageNamed:@"sfondo_app.png"]]; [self.tableView setBackgroundView:bgImg]; [bgImg release]; [self.tableView reloadData]; [super viewDidLoad]; } - (void)viewWillAppear:(BOOL)animated { if (self.recipesArray != nil) { // Release the arrays [self.recipesArray release]; [self.recipesNames release]; } // Load the dictionary NSString *path = nil; // Load a different dictionary, based on the category if (self.category == kRecipeAntipasti) { path = [[NSBundle mainBundle] pathForResource:@"recipes_antipasti" ofType:@"plist"]; } else if (self.category == kRecipeFocacce) { path = [[NSBundle mainBundle] pathForResource:@"recipes_focacce" ofType:@"plist"]; } else if (self.category == kRecipePrimi) { path = [[NSBundle mainBundle] pathForResource:@"recipes_primi" ofType:@"plist"]; } else if (self.category == kRecipeSecondi) { path = [[NSBundle mainBundle] pathForResource:@"recipes_secondi" ofType:@"plist"]; } else if (self.category == kRecipeContorni) { path = [[NSBundle mainBundle] pathForResource:@"recipes_contorni" ofType:@"plist"]; } else if (self.category == kRecipeDolci) { path = [[NSBundle mainBundle] pathForResource:@"recipes_dolci" ofType:@"plist"]; } NSDictionary *dict = [[NSDictionary alloc] initWithContentsOfFile:path]; self.recipesArray = dict; [dict release]; // Save recipes names NSArray *array = [[recipesArray allKeys] sortedArrayUsingSelector: @selector(compare:)]; self.recipesNames = array; [self.tableView reloadData]; [super viewWillAppear:animated]; } - (void)viewDidUnload { self.recipesArray = nil; self.recipesNames = nil; self.recipesLinks = nil; // [childController release]; [super viewDidUnload]; } - (void)dealloc { [recipesArray release]; [recipesNames release]; [recipesLinks release]; // [childController release]; [super dealloc]; } #pragma mark - #pragma mark Table data source methods - (NSInteger)tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger)section { return [recipesNames count]; } - (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath { static NSString *RecipesListCellId = @"RecipesListCellId"; // Try to reuse a cell or create a new one UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:RecipesListCellId]; if (cell == nil) { cell = [[[UITableViewCell alloc] initWithStyle:UITableViewCellStyleDefault reuseIdentifier:RecipesListCellId] autorelease]; } // Get the right value and assign to the cell NSUInteger row = [indexPath row]; NSString *rowString = [recipesNames objectAtIndex:row]; cell.textLabel.text = rowString; cell.accessoryType = UITableViewCellAccessoryDisclosureIndicator; [rowString release]; return cell; } #pragma mark - #pragma mark Table view delegate methods - (void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath { if (childController == nil) { childController = [[DisclosureDetailController alloc] initWithNibName:@"DisclosureDetail" bundle:nil]; } childController.title = @"Dettagli"; NSUInteger row = [indexPath row]; childController.recipeName = [recipesNames objectAtIndex:row]; NSArray *recipeRawArray = [recipesArray objectForKey:childController.recipeName]; childController.recipeLink = [recipeRawArray objectAtIndex:kRecipeArrayLink]; childController.recipeDifficulty = [recipeRawArray objectAtIndex:kRecipeArrayDifficulty]; [self.navigationController pushViewController:childController animated:YES]; } @end This is the crash log Program received signal: “EXC_BAD_ACCESS”. (gdb) bt #0 0x00f0da63 in objc_msgSend () #1 0x04b27ca0 in ?? () #2 0x00002665 in -[RecipesListController viewWillAppear:] (self=0x4b38a00, _cmd=0x6d81a2, animated=1 '\001') at /Users/claudiocanino/Documents/iOS/CottoMangiato/Classes/RecipesListController.m:67 #3 0x00370c9a in -[UINavigationController _startTransition:fromViewController:toViewController:] () #4 0x0036b606 in -[UINavigationController _startDeferredTransitionIfNeeded] () #5 0x0037283e in -[UINavigationController pushViewController:transition:forceImmediate:] () #6 0x04f49549 in -[UINavigationControllerAccessibility(SafeCategory) pushViewController:transition:forceImmediate:] () #7 0x0036b4a0 in -[UINavigationController pushViewController:animated:] () #8 0x00003919 in -[CategoryViewController tableView:didSelectRowAtIndexPath:] (self=0x4b27ca0, _cmd=0x6d19e3, tableView=0x500c200, indexPath=0x4b2d650) at /Users/claudiocanino/Documents/iOS/CottoMangiato/Classes/CategoryViewCotroller.m:104 #9 0x0032a794 in -[UITableView _selectRowAtIndexPath:animated:scrollPosition:notifyDelegate:] () #10 0x00320d50 in -[UITableView _userSelectRowAtPendingSelectionIndexPath:] () #11 0x000337f6 in __NSFireDelayedPerform () #12 0x00d8cfe3 in __CFRUNLOOP_IS_CALLING_OUT_TO_A_TIMER_CALLBACK_FUNCTION__ () #13 0x00d8e594 in __CFRunLoopDoTimer () #14 0x00ceacc9 in __CFRunLoopRun () #15 0x00cea240 in CFRunLoopRunSpecific () #16 0x00cea161 in CFRunLoopRunInMode () #17 0x016e0268 in GSEventRunModal () #18 0x016e032d in GSEventRun () #19 0x002c342e in UIApplicationMain () #20 0x00001c08 in main (argc=1, argv=0xbfffef58) at /Users/claudiocanino/Documents/iOS/CottoMangiato/main.m:15 Another bt log: (gdb) bt #0 0x00cd76a1 in __CFBasicHashDeallocate () #1 0x00cc2bcb in _CFRelease () #2 0x00002dd6 in -[RecipesListController setRecipesArray:] (self=0x6834d50, _cmd=0x4293, _value=0x4e3bc70) at /Users/claudiocanino/Documents/iOS/CottoMangiato/Classes/RecipesListController.m:16 #3 0x00002665 in -[RecipesListController viewWillAppear:] (self=0x6834d50, _cmd=0x6d81a2, animated=1 '\001') at /Users/claudiocanino/Documents/iOS/CottoMangiato/Classes/RecipesListController.m:67 #4 0x00370c9a in -[UINavigationController _startTransition:fromViewController:toViewController:] () #5 0x0036b606 in -[UINavigationController _startDeferredTransitionIfNeeded] () #6 0x0037283e in -[UINavigationController pushViewController:transition:forceImmediate:] () #7 0x091ac549 in -[UINavigationControllerAccessibility(SafeCategory) pushViewController:transition:forceImmediate:] () #8 0x0036b4a0 in -[UINavigationController pushViewController:animated:] () #9 0x00003919 in -[CategoryViewController tableView:didSelectRowAtIndexPath:] (self=0x4b12970, _cmd=0x6d19e3, tableView=0x5014400, indexPath=0x4b2bd00) at /Users/claudiocanino/Documents/iOS/CottoMangiato/Classes/CategoryViewCotroller.m:104 #10 0x0032a794 in -[UITableView _selectRowAtIndexPath:animated:scrollPosition:notifyDelegate:] () #11 0x00320d50 in -[UITableView _userSelectRowAtPendingSelectionIndexPath:] () #12 0x000337f6 in __NSFireDelayedPerform () #13 0x00d8cfe3 in __CFRUNLOOP_IS_CALLING_OUT_TO_A_TIMER_CALLBACK_FUNCTION__ () #14 0x00d8e594 in __CFRunLoopDoTimer () #15 0x00ceacc9 in __CFRunLoopRun () #16 0x00cea240 in CFRunLoopRunSpecific () #17 0x00cea161 in CFRunLoopRunInMode () #18 0x016e0268 in GSEventRunModal () #19 0x016e032d in GSEventRun () #20 0x002c342e in UIApplicationMain () #21 0x00001c08 in main (argc=1, argv=0xbfffef58) at /Users/claudiocanino/Documents/iOS/CottoMangiato/main.m:15 Thanks

Read the article

how to bind repeater control as message threading

- by Shalin Gajjar

i have crm application. i have one difficulties that how i bind repeater control as message threading. like first thread as question and second thread as answer of that question. if user asked multiple question then first,second,.. threads as question and.as it is like message chatting... for keeping data from database i use this stored procedure: set ANSI_NULLS ON set QUOTED_IDENTIFIER ON GO ALTER PROCEDURE [dbo].[ViewMessageThreads] (@inquiry_id varchar(50)) AS BEGIN SET NOCOUNT ON; select i.body as master_body, h.body as history_body, q.body as question_body, q.Created_date as question_timestamp, a.body as answer_body, a.Created_date as answer_timestamp, t.Type_name as user_type from tbl_Inquiry_History i left join tbl_Inquiry_master h on h.Inquiry_id=i.Inquiry_id left join tbl_Question q on q.Inquiry_id=i.Inquiry_id left join tbl_Answer a on a.Question_id=q.Inquiry_id left join tbl_User_master u on u.Id=i.User_id left join tbl_Login_master l on l.Id=u.User_id left join tbl_Type t on t.Id = l.type_id where (i.Inquiry_id=@inquiry_id) END and this gives me result as: master_body history_body question_body question_t.. answer_body answer_t.. user_type __________________________________________________________________________________________ question 1 NULL question 1 2005-03-14... NULL NULL User question 1 NULL question 2 2005-03-14... NULL NULL User and i include this design source of repeater: <asp:Repeater ID="Repeater_Inquiry_Messages" runat="server"> <ItemTemplate> <table id="ctl00_ContentPlaceHolder1_dl_ticketmsg" cellspacing="0" border="0" style="width:100%;border-collapse:collapse;"> <tbody><tr> <td style="background-color:#F5F5FF;"> <table cellpadding="0" cellspacing="0" border="0"> <tbody><tr> <td class="header"> <span id="ctl00_ContentPlaceHolder1_dl_ticketmsg_ctl00_lbl_msg_no"><%#Container.ItemIndex+1 %></span></td> <td class="normaltext" valign="bottom"> <span id="ctl00_ContentPlaceHolder1_dl_ticketmsg_ctl00_lbl_tagline">Message By <b><asp:Label ID="lbl_user_t" runat="server" Text='<%#Eval("user_type")%>'/></b> on <asp:Label ID="lbldatetime" runat="server" Text='<%# DataBinder.Eval(Container.DataItem, "question_timestamp","{0:ddd, dd MMMM yyyy}")%>'/></span></td> </tr> <tr> <td class="header">  </td> <td class="normaltext" valign="bottom"> <b>Message :</b><br> <span id="ctl00_ContentPlaceHolder1_dl_ticketmsg_ctl00_Label1"><asp:Label ID="lbl_inquiry_desc" runat="server" Text='<%#Eval("question_body")%>'/></span></td> </tr> </tbody></table> </td> </tr> </tbody></table> </ItemTemplate> <SeparatorTemplate> <table> <tr> <td style="height:3px"></td> </tr> </table> </SeparatorTemplate> <ItemTemplate> <table id="ctl00_ContentPlaceHolder1_dl_ticketmsg1" cellspacing="0" border="0" style="width:100%;border-collapse:collapse;"> <tbody><tr> <td style="background-color:#F5F5FF;"> <table cellpadding="0" cellspacing="0" border="0"> <tbody><tr> <td class="header"> <span id="ctl00_ContentPlaceHolder1_dl_ticketmsg1_ctl00_lbl_msg_no"><%#Container.ItemIndex+1 %></span></td> <td class="normaltext" valign="bottom"> <span id="ctl00_ContentPlaceHolder1_dl_ticketmsg1_ctl00_lbl_tagline">Message By <b><asp:Label ID="Label1" runat="server" Text='<%#Eval("user_type")%>'/></b> on <asp:Label ID="Label2" runat="server" Text='<%# DataBinder.Eval(Container.DataItem, "answer_timestamp","{0:ddd, dd MMMM yyyy}")%>'/></span></td> </tr> <tr> <td class="header">  </td> <td class="normaltext" valign="bottom"> <b>Message :</b><br> <span id="ctl00_ContentPlaceHolder1_dl_ticketmsg1_ctl00_Label1"><asp:Label ID="Label3" runat="server" Text='<%#Eval("answer_body")%>'/></span></td> </tr> <tr> <td class="header">  </td> <td class="normaltext" valign="bottom"> <b></b> </td> </tr> </tbody></table> </td> </tr> </tbody></table> </ItemTemplate> </asp:Repeater> how ever this gives me only question thread while i commenting up this second message thread. ----------------------------------------Updated--------------------------------------- please help me.. ---------------------------------------Updated---------------------------------------- Server Error in '/OmInvestmentStockMarketing_new' Application. Compilation Error Description: An error occurred during the compilation of a resource required to service this request. Please review the following specific error details and modify your source code appropriately. Compiler Error Message: CS1026: ) expected Source Error: Line 162: <span id="ctl00_ContentPlaceHolder1_dl_ticketmsg_ctl00_lbl_msg_no"><%#Container.ItemIndex+1 %></span></td> Line 163: <td class="normaltext" valign="bottom"> Line 164: <span id="ctl00_ContentPlaceHolder1_dl_ticketmsg_ctl00_lbl_tagline">Message By <b><asp:Label ID="lbl_user_t" runat="server" Text='<%# If(Eval("cargo2").ToString() Is "Admin", "You", Eval("cargo2"))%>'/></b> Line 165: on <asp:Label ID="lbldatetime" runat="server" Text='<%# DataBinder.Eval(Container.DataItem,"cargo1","{0:ddd, dd MMMM yyyy}")%>'/></span></td> Line 166: </tr> Source File: c:\Documents and Settings\Vishal\My Documents\Visual Studio 2005\WebSites\OmInvestmentStockMarketing_new\Admin\OWM_Inquiry.aspx Line: 164 Show Detailed Compiler Output: Show Complete Compilation Source: Version Information: Microsoft .NET Framework Version:2.0.50727.3053; ASP.NET Version:2.0.50727.3053

Read the article

Criticize my code, please

- by Micky

Hey, I was applying for a position, and they asked me to complete a coding problem for them. I did so and submitted it, but I later found out I was rejected from the position. Anyways, I have an eclectic programming background so I'm not sure if my code is grossly wrong or if I just didn't have the best solution out there. I would like to post my code and get some feedback about it. Before I do, here's a description of a problem: You are given a sorted array of integers, say, {1, 2, 4, 4, 5, 8, 9, 9, 9, 9, 9, 9, 10, 10, 10, 11, 13 }. Now you are supposed to write a program (in C or C++, but I chose C) that prompts the user for an element to search for. The program will then search for the element. If it is found, then it should return the first index the entry was found at and the number of instances of that element. If the element is not found, then it should return "not found" or something similar. Here's a simple run of it (with the array I just put up): Enter a number to search for: 4 4 was found at index 2. There are 2 instances for 4 in the array. Enter a number to search for: -4. -4 is not in the array. They made a comment that my code should scale well with large arrays (so I wrote up a binary search). Anyways, my code basically runs as follows: Prompts user for input. Then it checks if it is within bounds (bigger than a[0] in the array and smaller than the largest element of the array). If so, then I perform a binary search. If the element is found, then I wrote two while loops. One while loop will count to the left of the element found, and the second while loop will count to the right of the element found. The loops terminate when the adjacent elements do not match with the desired value. EX: 4, 4, 4, 4, 4 The bold 4 is the value the binary search landed on. One loop will check to the left of it, and another loop will check to the right of it. Their sum will be the total number of instances of the the number four. Anyways, I don't know if there are any advanced techniques that I am missing or if I just don't have the CS background and made a big error. Any constructive critiques would be appreciated! #include <stdio.h> #include <stdlib.h> #include <string.h> #include <stddef.h> /* function prototype */ int get_num_of_ints( const int* arr, size_t r, int N, size_t* first, size_t* count ); int main() { int N; /* input variable */ int arr[]={1,1,2,3,3,4,4,4,4,5,5,7,7,7,7,8,8,8,9,11,12,12}; /* array of sorted integers */ size_t r = sizeof(arr)/sizeof(arr[0]); /* right bound */ size_t first; /* first match index */ size_t count; /* total number of matches */ /* prompts the user to enter input */ printf( "\nPlease input the integer you would like to find.\n" ); scanf( "%d", &N ); int a = get_num_of_ints( arr, r, N, &first, &count ); /* If the function returns -1 then the value is not found. Else it is returned */ if( a == -1) printf( "%d has not been found.\n", N ); else if(a >= 0){ printf( "The first matching index is %d.\n", first ); printf( "The total number of instances is %d.\n", count ); } return 0; } /* function definition */ int get_num_of_ints( const int* arr, size_t r, int N, size_t* first, size_t* count ) { int lo=0; /* lower bound for search */ int m=0; /* middle value obtained */ int hi=r-1; /* upper bound for search */ int w=r-1; /* used as a fixed upper bound to calculate the number of right instances of a particular value. */ /* binary search to find if a value exists */ /* first check if the element is out of bounds */ if( N < arr[0] || arr[hi] < N ){ m = -1; } else{ /* binary search to find a value, if it exists, within given parameters */ while(lo <= hi){ m = (hi + lo)/2; if(arr[m] < N) lo = m+1; else if(arr[m] > N) hi = m-1; else if(arr[m]==N){ m=m; break; } } if (lo > hi) /* if it doesn't we assign it -1 */ m = -1; } /* If the value is found, then we compute the left and right instances of it */ if( m >= 0 ){ int j = m-1; /* starting with the first term to the left */ int L = 0; /* total number of left instances */ /* while loop computes total number of left instances */ while( j >= 0 && arr[j] == arr[m] ){ L++; j--; } /* There are six possible outcomes of this. Depending on the outcome, we must assign the first index variable accordingly */ if( j > 0 && L > 0 ) *first=j+1; else if( j==0 && L==0) *first=m; else if( j > 0 && L==0 ) *first=m; else if(j < 0 && L==0 ) *first=m; else if( j < 0 && L > 0 ) *first=0; else if( j=0 && L > 0 ) *first=j+1; int h = m + 1; /* starting with the first term to the right */ int R = 0; /* total number of right instances */ /* while loop computes total number of right instances */ /* we fixed w earlier so that it's value does not change */ while( arr[h]==arr[m] && h <= w ){ R++; h++; } *count = (R + L + 1); /* total number of instances stored as value of count */ return *first; /* first instance index stored here */ } /* if value does not exist, then we return a negative value */ else if( m==-1) return -1; }

Read the article

Navigating MainMenu with arrow keys or controller

- by Phil Royer

I'm attempting to make my menu navigable with the arrow keys or via the d-pad on a controller. So Far I've had no luck. The question is: Can someone walk me through how to make my current menu or any libgdx menu keyboard accessible? I'm a bit noobish with some stuff and I come from a Javascript background. Here's an example of what I'm trying to do: http://dl.dropboxusercontent.com/u/39448/webgl/qb/qb.html For a simple menu that you can just add a few buttons to and it run out of the box use this: http://www.sadafnoor.com/blog/how-to-create-simple-menu-in-libgdx/ Or you can use my code but I use a lot of custom styles. And here's an example of my code: import aurelienribon.tweenengine.Timeline; import aurelienribon.tweenengine.Tween; import aurelienribon.tweenengine.TweenManager; import com.badlogic.gdx.Game; import com.badlogic.gdx.Gdx; import com.badlogic.gdx.Screen; import com.badlogic.gdx.graphics.GL20; import com.badlogic.gdx.graphics.Texture; import com.badlogic.gdx.graphics.g2d.Sprite; import com.badlogic.gdx.graphics.g2d.SpriteBatch; import com.badlogic.gdx.graphics.g2d.TextureAtlas; import com.badlogic.gdx.math.Vector2; import com.badlogic.gdx.scenes.scene2d.Actor; import com.badlogic.gdx.scenes.scene2d.InputEvent; import com.badlogic.gdx.scenes.scene2d.InputListener; import com.badlogic.gdx.scenes.scene2d.Stage; import com.badlogic.gdx.scenes.scene2d.ui.Skin; import com.badlogic.gdx.scenes.scene2d.ui.Table; import com.badlogic.gdx.scenes.scene2d.ui.TextButton; import com.badlogic.gdx.scenes.scene2d.utils.Align; import com.badlogic.gdx.scenes.scene2d.utils.ClickListener; import com.project.game.tween.ActorAccessor; public class MainMenu implements Screen { private SpriteBatch batch; private Sprite menuBG; private Stage stage; private TextureAtlas atlas; private Skin skin; private Table table; private TweenManager tweenManager; @Override public void render(float delta) { Gdx.gl.glClearColor(0, 0, 0, 1); Gdx.gl.glClear(GL20.GL_COLOR_BUFFER_BIT); batch.begin(); menuBG.draw(batch); batch.end(); //table.debug(); stage.act(delta); stage.draw(); //Table.drawDebug(stage); tweenManager.update(delta); } @Override public void resize(int width, int height) { menuBG.setSize(width, height); stage.setViewport(width, height, false); table.invalidateHierarchy(); } @Override public void resume() { } @Override public void show() { stage = new Stage(); Gdx.input.setInputProcessor(stage); batch = new SpriteBatch(); atlas = new TextureAtlas("ui/atlas.pack"); skin = new Skin(Gdx.files.internal("ui/menuSkin.json"), atlas); table = new Table(skin); table.setBounds(0, 0, Gdx.graphics.getWidth(), Gdx.graphics.getHeight()); // Set Background Texture menuBackgroundTexture = new Texture("images/mainMenuBackground.png"); menuBG = new Sprite(menuBackgroundTexture); menuBG.setSize(Gdx.graphics.getWidth(), Gdx.graphics.getHeight()); // Create Main Menu Buttons // Button Play TextButton buttonPlay = new TextButton("START", skin, "inactive"); buttonPlay.addListener(new ClickListener() { @Override public void clicked(InputEvent event, float x, float y) { ((Game) Gdx.app.getApplicationListener()).setScreen(new LevelMenu()); } }); buttonPlay.addListener(new InputListener() { public boolean keyDown (InputEvent event, int keycode) { System.out.println("down"); return true; } }); buttonPlay.padBottom(12); buttonPlay.padLeft(20); buttonPlay.getLabel().setAlignment(Align.left); // Button EXTRAS TextButton buttonExtras = new TextButton("EXTRAS", skin, "inactive"); buttonExtras.addListener(new ClickListener() { @Override public void clicked(InputEvent event, float x, float y) { ((Game) Gdx.app.getApplicationListener()).setScreen(new ExtrasMenu()); } }); buttonExtras.padBottom(12); buttonExtras.padLeft(20); buttonExtras.getLabel().setAlignment(Align.left); // Button Credits TextButton buttonCredits = new TextButton("CREDITS", skin, "inactive"); buttonCredits.addListener(new ClickListener() { @Override public void clicked(InputEvent event, float x, float y) { ((Game) Gdx.app.getApplicationListener()).setScreen(new Credits()); } }); buttonCredits.padBottom(12); buttonCredits.padLeft(20); buttonCredits.getLabel().setAlignment(Align.left); // Button Settings TextButton buttonSettings = new TextButton("SETTINGS", skin, "inactive"); buttonSettings.addListener(new ClickListener() { @Override public void clicked(InputEvent event, float x, float y) { ((Game) Gdx.app.getApplicationListener()).setScreen(new Settings()); } }); buttonSettings.padBottom(12); buttonSettings.padLeft(20); buttonSettings.getLabel().setAlignment(Align.left); // Button Exit TextButton buttonExit = new TextButton("EXIT", skin, "inactive"); buttonExit.addListener(new ClickListener() { @Override public void clicked(InputEvent event, float x, float y) { Gdx.app.exit(); } }); buttonExit.padBottom(12); buttonExit.padLeft(20); buttonExit.getLabel().setAlignment(Align.left); // Adding Heading-Buttons to the cue table.add().width(190); table.add().width((table.getWidth() / 10) * 3); table.add().width((table.getWidth() / 10) * 5).height(140).spaceBottom(50); table.add().width(190).row(); table.add().width(190); table.add(buttonPlay).spaceBottom(20).width(460).height(110); table.add().row(); table.add().width(190); table.add(buttonExtras).spaceBottom(20).width(460).height(110); table.add().row(); table.add().width(190); table.add(buttonCredits).spaceBottom(20).width(460).height(110); table.add().row(); table.add().width(190); table.add(buttonSettings).spaceBottom(20).width(460).height(110); table.add().row(); table.add().width(190); table.add(buttonExit).width(460).height(110); table.add().row(); stage.addActor(table); // Animation Settings tweenManager = new TweenManager(); Tween.registerAccessor(Actor.class, new ActorAccessor()); // Heading and Buttons Fade In Timeline.createSequence().beginSequence() .push(Tween.set(buttonPlay, ActorAccessor.ALPHA).target(0)) .push(Tween.set(buttonExtras, ActorAccessor.ALPHA).target(0)) .push(Tween.set(buttonCredits, ActorAccessor.ALPHA).target(0)) .push(Tween.set(buttonSettings, ActorAccessor.ALPHA).target(0)) .push(Tween.set(buttonExit, ActorAccessor.ALPHA).target(0)) .push(Tween.to(buttonPlay, ActorAccessor.ALPHA, .5f).target(1)) .push(Tween.to(buttonExtras, ActorAccessor.ALPHA, .5f).target(1)) .push(Tween.to(buttonCredits, ActorAccessor.ALPHA, .5f).target(1)) .push(Tween.to(buttonSettings, ActorAccessor.ALPHA, .5f).target(1)) .push(Tween.to(buttonExit, ActorAccessor.ALPHA, .5f).target(1)) .end().start(tweenManager); tweenManager.update(Gdx.graphics.getDeltaTime()); } public static Vector2 getStageLocation(Actor actor) { return actor.localToStageCoordinates(new Vector2(0, 0)); } @Override public void dispose() { stage.dispose(); atlas.dispose(); skin.dispose(); menuBG.getTexture().dispose(); } @Override public void hide() { dispose(); } @Override public void pause() { } }

Read the article

Changing the action of a form with javascript/jquery

- by Micah

I'm having an issue that is driving me crazy. I'm trying to modify the openid-selector to support facebook. I'm using RPXNow as my provider so it requires the form to be submitted to a different url than the standard. For example. RpxNow requires me to setup my form like this: <form action="https://wikipediamaze.rpxnow.com/openid/start?token_url=..."> This works for every provider except for facebook and myspace. Those require the form to be posted to a different url like this: <form action="https://wikipediamaze.rpxnow.com/facebook/start?token_url=..."> and <form action="https://wikipediamaze.rpxnow.com/myspace/start?token_url=..."> The open id selector has a bunch of buttons on the form each representing the openid providers. What I'm trying to do is detect when the facebook or myspace button is clicked and changed the action on the form before submitting. However it's not working. Here is my code. I've tried several variations all with the same "not supported" exception $("#openid_form").attr("action", form_url) document.forms[0].action = form_url Any suggestions? Update Here are more details on the code. I've ommitted some for brevity. The only thing i've done is added the facebook section to the "providers_large" object (which successfully adds the logo to the website), and instead of supply a url identifying the user, I'm creating a property called "form_url" which is what I want to set the action of my form to. If you look at the section title "Provider image click" you'll see where I'm checking for the presence of the property "form_url" and using jquery to change the action and submit the form. However when I step through the javascript in debug mode it tells me it's an ivalid operation. var providers_large = { google: { name: 'Google', url: 'https://www.google.com/accounts/o8/id' }, facebook: { name: 'Facebook', form_url: 'http://wikipediamaze.rpxnow.com/facebook/start?token_url=http://www.wikipediamaze.com/Accounts/Logon' }, }; var providers_small = { myopenid: { name: 'MyOpenID', label: 'Enter your MyOpenID username.', url: 'http://{username}.myopenid.com/' }, livejournal: { name: 'LiveJournal', label: 'Enter your Livejournal username.', url: 'http://{username}.livejournal.com/' }, flickr: { name: 'Flickr', label: 'Enter your Flickr username.', url: 'http://flickr.com/{username}/' }, technorati: { name: 'Technorati', label: 'Enter your Technorati username.', url: 'http://technorati.com/people/technorati/{username}/' }, wordpress: { name: 'Wordpress', label: 'Enter your Wordpress.com username.', url: 'http://{username}.wordpress.com/' }, blogger: { name: 'Blogger', label: 'Your Blogger account', url: 'http://{username}.blogspot.com/' }, verisign: { name: 'Verisign', label: 'Your Verisign username', url: 'http://{username}.pip.verisignlabs.com/' }, vidoop: { name: 'Vidoop', label: 'Your Vidoop username', url: 'http://{username}.myvidoop.com/' }, verisign: { name: 'Verisign', label: 'Your Verisign username', url: 'http://{username}.pip.verisignlabs.com/' }, claimid: { name: 'ClaimID', label: 'Your ClaimID username', url: 'http://claimid.com/{username}' } }; var providers = $.extend({}, providers_large, providers_small); var openid = { cookie_expires: 6*30, // 6 months. cookie_name: 'openid_provider', cookie_path: '/', img_path: 'images/', input_id: null, provider_url: null, init: function(input_id) { var openid_btns = $('#openid_btns'); this.input_id = input_id; $('#openid_choice').show(); $('#openid_input_area').empty(); // add box for each provider for (id in providers_large) { openid_btns.append(this.getBoxHTML(providers_large[id], 'large', '.gif')); } if (providers_small) { openid_btns.append('<br/>'); for (id in providers_small) { openid_btns.append(this.getBoxHTML(providers_small[id], 'small', '.ico')); } } $('#openid_form').submit(this.submit); var box_id = this.readCookie(); if (box_id) { this.signin(box_id, true); } }, getBoxHTML: function(provider, box_size, image_ext) { var box_id = provider["name"].toLowerCase(); return '<a title="'+provider["name"]+'" href="javascript: openid.signin(\''+ box_id +'\');"' + ' style="background: #FFF url(' + this.img_path + box_id + image_ext+') no-repeat center center" ' + 'class="' + box_id + ' openid_' + box_size + '_btn"></a>'; }, /* Provider image click */ signin: function(box_id, onload) { var provider = providers[box_id]; if (! provider) { return; } this.highlight(box_id); this.setCookie(box_id); // prompt user for input? if (provider['label']) { this.useInputBox(provider); this.provider_url = provider['url']; } else if(provider['form_url']) { $('#openid_form').attr("action", provider['form_url']); $('#openid_form').submit(); } else { this.setOpenIdUrl(provider['url']); if (! onload) { $('#openid_form').submit(); } } }, /* Sign-in button click */ submit: function() { var url = openid.provider_url; if (url) { url = url.replace('{username}', $('#openid_username').val()); openid.setOpenIdUrl(url); } return true; }, setOpenIdUrl: function (url) { var hidden = $('#'+this.input_id); if (hidden.length > 0) { hidden.value = url; } else { $('#openid_form').append('<input type="hidden" id="' + this.input_id + '" name="' + this.input_id + '" value="'+url+'"/>'); } }, highlight: function (box_id) { // remove previous highlight. var highlight = $('#openid_highlight'); if (highlight) { highlight.replaceWith($('#openid_highlight a')[0]); } // add new highlight. $('.'+box_id).wrap('<div id="openid_highlight"></div>'); }, setCookie: function (value) { var date = new Date(); date.setTime(date.getTime()+(this.cookie_expires*24*60*60*1000)); var expires = "; expires="+date.toGMTString(); document.cookie = this.cookie_name+"="+value+expires+"; path=" + this.cookie_path; }, readCookie: function () { var nameEQ = this.cookie_name + "="; var ca = document.cookie.split(';'); for(var i=0;i < ca.length;i++) { var c = ca[i]; while (c.charAt(0)==' ') c = c.substring(1,c.length); if (c.indexOf(nameEQ) == 0) return c.substring(nameEQ.length,c.length); } return null; }, useInputBox: function (provider) { var input_area = $('#openid_input_area'); var html = ''; var id = 'openid_username'; var value = ''; var label = provider['label']; var style = ''; if (label) { html = '<p>' + label + '</p>'; } if (provider['name'] == 'OpenID') { id = this.input_id; value = 'http://'; style = 'background:#FFF url('+this.img_path+'openid-inputicon.gif) no-repeat scroll 0 50%; padding-left:18px;'; } html += '<input id="'+id+'" type="text" style="'+style+'" name="'+id+'" value="'+value+'" />' + '<input id="openid_submit" type="submit" value="Sign-In"/>'; input_area.empty(); input_area.append(html); $('#'+id).focus(); } };

Search Results

Search found 11147 results on 446 pages for 'background foreground'.

Page 341/446 | < Previous Page | 337 338 339 340 341 342 343 344 345 346 347 348 | Next Page >

- by Designer023

- by Mat

- by devnull

- by permissiontomars

- by user2499

- by krayzwytie

- by Justin

- by Alxandr

- by developer

- by firoso

- by Paul

- by msfanboy

- by bergler77

- by Lauren

- by Aaron Hoffman

- by Ryan

- by Kelbizzle

- by Arslan Pervaiz

- by Uri

- by krayzwytie

- by jollyr0ger

- by Shalin Gajjar

- by Micky

- by Phil Royer

- by Micah

< Previous Page | 337 338 339 340 341 342 343 344 345 346 347 348 | Next Page >