Search Results

Search found 19093 results on 764 pages for 'max path'.

Page 342/764 | < Previous Page | 338 339 340 341 342 343 344 345 346 347 348 349  | Next Page >

  • Zero-channel RAID for High Performance MySQL Server (IBM ServeRAID 8k) : Any Experience/Recommendati

    - by prs563
    We are getting this IBM rack mount server and it has this IBM ServeRAID8k storage controller with Zero-Channel RAID and 256MB battery backed cache. It can support RAID 10 which we need for our high performance MySQL server which will have 4 x 15000K RPM 300GB SAS HDD. This is mission-critical and we want as much bandwidth and performance. Is this a good card or should we replace with another IBM RAID card? IBM ServeRAID 8k SAS Controller option provides 256 MB of battery backed 533 MHz DDR2 standard power memory in a fixed mounting arrangement. The device attaches directly to IBM planar which can provide full RAID capability. Manufacturer IBM Manufacturer Part # 25R8064 Cost Central Item # 10025907 Product Description IBM ServeRAID 8k SAS - Storage controller (zero-channel RAID) - RAID 0, 1, 5, 6, 10, 1E Device Type Storage controller (zero-channel RAID) - plug-in module Buffer Size 256 MB Supported Devices Disk array (RAID) Max Storage Devices Qty 8 RAID Level RAID 0, RAID 1, RAID 5, RAID 6, RAID 10, RAID 1E Manufacturer Warranty 1 year warranty

    Read the article

  • how do web hosting companies host end users domain and give so many public IPs

    - by Registered User
    Hi, I am a Computer Science guy who understands networking very well. But when it comes to Web hosting companies I am clue less. I want to know how do web hosting companies give so many public IPs to so many users and each of them has root login also. How this is technically done that is what I am interested to know. I do not know how you people configure it. In my case if I have to do I will buy a public IP from some one and connect my server to it and at max give some people SSH access to it.In case of Web hosting companies how is it done.

    Read the article

  • how can load images from plist in to UITableView ?

    - by srikanth rongali
    I have stored the videos and the thumbnail images of the videos in Documents folder. And I have given the path in plist. In plist I took an array and I added directories to the array. And in the dictionary I stored the image path /Users/srikanth/Library/Application Support/iPhone Simulator/User/Applications/9E6E8B22-C946-4442-9209-75BB0E924434/Documents/image1 for key imagePath. for video /Users/srikanth/Library/Application Support/iPhone Simulator/User/Applications/9E6E8B22-C946-4442-9209-75BB0E924434/Documents/video1.mp4 for key filePath. I used following code but it is not working. I am trying only for images. I need the images to be loaded in the table in each cell. - (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath { static NSString *CellIdentifier = @"Cell"; UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:CellIdentifier]; if (cell == nil) { cell = [[[UITableViewCell alloc] initWithFrame:CGRectZero reuseIdentifier:CellIdentifier] autorelease]; [cell setAccessoryType:UITableViewCellAccessoryDetailDisclosureButton]; UIImageView *image2 = [[UIImageView alloc]init]; image2.frame = CGRectMake(0.0f, 0.0f, 80.0f, 80.0f); image2.backgroundColor = [UIColor clearColor]; //image2.image = [UIImage imageNamed:@"snook.png"]; image2.tag = tag7; } NSDictionary *dictOfplist = [cells objectAtIndex:indexPath.row]; [(UIImageView *)[cell viewWithTag:tag7] setImage:[dictOfplist objectForKey:@"imagePath"]]; return cell; } - (void)viewDidLoad { [super viewDidLoad]; self.title = @"Library"; self.navigationItem.rightBarButtonItem = [[UIBarButtonItem alloc] initWithTitle:@"Close" style:UIBarButtonItemStyleBordered target:self action:@selector(close:)]; NSString* plistPath = [[NSBundle mainBundle] pathForResource:@"details" ofType:@"plist"]; contentArray = [NSArray arrayWithContentsOfFile:plistPath]; cells = [[NSMutableArray alloc]initWithCapacity:[contentArray count]]; for(dCount = 0; dCount < [contentArray count]; dCount++) [cells addObject:[contentArray objectAtIndex:dCount]]; } How can I make this work. Thank you.

    Read the article

  • how to store JSON into POJO using Jackson

    - by user2963680
    I am developing a module where i am using rest service to get data. i am not getting how to store JSON using Jackson and store it which has Queryparam also. Any help is really appreciated as I am new to this.I am trying to do server side filtering in extjs infinte grid which is sending the below request to rest service. when the page load first time, it sends http://myhost/mycontext/rest/populateGrid?_dc=9999999999999&page=1&start=0&limit=500 when you select filter on name and place, it sends http://myhost/mycontext/rest/populateGrid?_dc=9999999999999&filter=[{"type":"string","value":"Tom","field":"name"},{"type":"string","value":"London","field":"Location"}]&page=1&start=0&limit=500 I am trying to save this in POJO and then sending this to database to retrieve data. For this on rest side i have written something like this @Provider @Path("/rest") public interface restAccessPoint { @GET @Path("/populateGrid") @Produces({MediaType.APPLICATION_JSON}) public Response getallGridData(FilterJsonToJava filterparam,@QueryParam("page") String page,@QueryParam("start") String start,@QueryParam("limit") String limit); } public class FilterJsonToJava { @JsonProperty(value ="filter") private List<Filter> data; .. getter and setter below } public class Filter { @JsonProperty("type") private String type; @JsonProperty("value") private String value; @JsonProperty("field") private String field; ...getter and setters below } I am getting the below error The following warnings have been detected with resource and/or provider classes: WARNING: A HTTP GET method, public abstract javax.ws.rs.core.Response com.xx.xx.xx.xxxxx (com.xx.xx.xx.xx.json.FilterJsonToJava ,java.lang.String,java.lang.String,java.lang.String), should not consume any entity. com.xx.xx.xx.xx.json.FilterJsonToJava, and Java type class com.xx.xx.xx.FilterJsonToJava, and MIME media type application/octet-stream was not found [11/6/13 17:46:54:065] 0000001c ContainerRequ E The registered message body readers compatible with the MIME media type are: application/octet-stream com.sun.jersey.core.impl.provider.entity.ByteArrayProvider com.sun.jersey.core.impl.provider.entity.FileProvider com.sun.jersey.core.impl.provider.entity.InputStreamProvider com.sun.jersey.core.impl.provider.entity.DataSourceProvider com.sun.jersey.core.impl.provider.entity.RenderedImageProvider */* -> com.sun.jersey.core.impl.provider.entity.FormProvider ...

    Read the article

  • Why do I get "file is not of required architecture" when I try to build my app on an iphone?

    - by Dale
    My app seemingly runs fine in the simulator but the first time I hooked a phone up to my system and had it build for it I got a huge error log with things like: Build SCCUI of project SCCUI with configuration Debug CompileXIB HandleAlert.xib cd /Users/gdbriggs/Desktop/SCCUI setenv IBC_MINIMUM_COMPATIBILITY_VERSION 3.1 setenv PATH "/Developer/Platforms/iPhoneOS.platform/Developer/usr/bin:/Developer/usr /bin:/usr/bin:/bin:/usr/sbin:/sbin" /Developer/usr/bin/ibtool --errors --warnings --notices --output-format human-readable-text --compile /Users/gdbriggs/Desktop/SCCUI/build/Debug-iphoneos/SCCUI.app/HandleAlert.nib /Users/gdbriggs/Desktop/SCCUI/HandleAlert.xib /* com.apple.ibtool.document.warnings */ /Users/gdbriggs/Desktop/SCCUI/HandleAlert.xib:13: warning: UITextView does not support data detectors when the text view is editable. Ld build/Debug-iphoneos/SCCUI.app/SCCUI normal armv6 cd /Users/gdbriggs/Desktop/SCCUI setenv IPHONEOS_DEPLOYMENT_TARGET 3.1 setenv MACOSX_DEPLOYMENT_TARGET 10.5 setenv PATH "/Developer/Platforms/iPhoneOS.platform/Developer/usr/bin:/Developer/usr/bin:/usr/bin:/bin:/usr/sbin:/sbin" /Developer/Platforms/iPhoneOS.platform/Developer/usr/bin/gcc-4.2 -arch armv6 -isysroot /Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.1.sdk -L/Users/gdbriggs/Desktop/SCCUI/build/Debug-iphoneos -F/Users/gdbriggs/Desktop/SCCUI/build/Debug-iphoneos -F/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator3.1.sdk/System/Library/Frameworks -filelist /Users/gdbriggs/Desktop/SCCUI/build/SCCUI.build/Debug-iphoneos/SCCUI.build/Objects-normal/armv6/SCCUI.LinkFileList -mmacosx-version-min=10.5 -dead_strip -miphoneos-version-min=3.1 -framework Foundation -framework UIKit -framework CoreGraphics -framework MessageUI -o /Users/gdbriggs/Desktop/SCCUI/build/Debug-iphoneos/SCCUI.app/SCCUI ld: warning: in /Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator3.1.sdk/System/Library/Frameworks/Foundation.framework/Foundation, file is not of required architecture ld: warning: in /Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator3.1.sdk/System/Library/Frameworks/UIKit.framework/UIKit, file is not of required architecture ld: warning: in /Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator3.1.sdk/System/Library/Frameworks/CoreGraphics.framework/CoreGraphics, file is not of required architecture ld: warning: in /Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator3.1.sdk/System/Library/Frameworks/MessageUI.framework/MessageUI, file is not of required architecture Undefined symbols: "_OBJC_CLASS_$_UIDevice", referenced from: __objc_classrefs__DATA@0 in SCAuthenticationHandler.o "_OBJC_CLASS_$_NSString", referenced from: __objc_classrefs__DATA@0 in CCProxy.o __objc_classrefs__DATA@0 in AlertSummaryViewController.o __objc_classrefs__DATA@0 in HomeLevelController.o __objc_classrefs__DATA@0 in SCAuthenticationHandler.o __objc_classrefs__DATA@0 in SCRequestHandler.o "_UIApplicationMain", referenced from: _main in main.o "_objc_msgSend", referenced from: _main in main.o _main in main.o _main in main.o -[SCCUIAppDelegate applicationDidFinishLaunching:] in and it just keeps going. At / near the bottom it says: ld: symbol(s) not found collect2: ld returned 1 exit status What am I doing wrong?

    Read the article

  • Activate a python virtual environment using activate_this.py in a fabfile on Windows

    - by Rudy Lattae
    I have a Fabric task that needs to access the settings of my Django project. On Windows, I'm unable to install Fabric into the project's virtualenv (issues with Paramiko + pycrypto deps). However, I am able to install Fabric in my system-wide site-packages, no problem. I have installed Django into the project's virtualenv and I am able to use all the " python manage.py" commands easily when I activate the virtualenv with the "VIRTUALENV\Scripts\activate.bat" script. I have a fabric tasks file (fabfile.py) in my project that provides tasks for setup, test, deploy, etc. Some of the tasks in my fabfile need to access the settings of my django project through "from django.conf import settings". Since the only usable Fabric install I have is in my system-wide site-packages, I need to activate the virtualenv within my fabfile so django becomes available. To do this, I use the "activate_this" module of the project's virtualenv in order to have access to the project settings and such. Using "print sys.path" before and after I execute activate_this.py, I can tell the python path changes to point to the virtualenv for the project. However, I still cannot import django.conf.settings. I have been able to successfully do this on *nix (Ubuntu and CentOS) and in Cygwin. Do you use this setup/workflow on Windows? If so Can you help me figure out why this wont work on Windows or provide any tips and tricks to get around this issue? Thanks and Cheers. REF: http://virtualenv.openplans.org/#id9 | Using Virtualenv without bin/python Local development environment: Python 2.5.4 Virtualenv 1.4.6 Fabric 0.9.0 Pip 0.6.1 Django 1.1.1 Windows XP (SP3)

    Read the article

  • Locking issues with replacing files on a website

    - by Moe Sisko
    I want to replace existing files on an IIS website with updated versions. Say these files are large pdf documents, which can be accessed via hyperlinks. The site is up 24x7, so I'm concerned about locking issues when a file is being updated at exactly the same time that someone is trying to read the file. The files are updated using C# code run on the server. I can think of two options for opening the file for writing. Option 1) Open the file for writing, using FileShare.Read : using (FileStream stream = new FileStream(path, FileMode.Create, FileAccess.Write, FileShare.Read)) While this file is open, and a user requests the same file for reading in a web browser via a hyperlink, the document opens up as a blank page. Option 2) Open the file for writing using FileShare.None : using (FileStream stream = new FileStream(path, FileMode.Create, FileAccess.Write, FileShare.None)) While this file is open, and a user requests the same file for reading in a web browser via a hyperlink, the browser shows an error. In IE 8, you get HTTP 500, "The website cannot display the page", and in Firefox 3.5, you get : "The process cannot access the file because it is being used by another process." The browser behaviour kind of makes sense, and seem reasonable. I guess its highly unlikely that a user will attempt to read a file at exactly the same time you are updating it. It would be nice if somehow, the file update was atomic, like updating a database with SQL wrapped around a transaction. I'm wondering if you guys worry about this sort of thing, and prefer either of the above options, or even have other options of your own for updating files.

    Read the article

  • Why does my DataTemplate break the WPF designer?

    - by PRINCESS FLUFF
    Why does the DataTemplate line break the WPF designer in Visual Studio 2008? The program compiles and runs properly. The DataTemplate is applied as it should. However the entire DataTemplate block of code is underlined in red, and when I simply "build" the program without running, I get the error "Type reference cannot find public type named 'Character'" How come it can't find it in the designer yet the program applies the template properly? <UserControl x:Class="WPF_Tests.Tests.TwoCollecViews.TwoViews" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:DetailsPane="clr-namespace:WPF_Tests.Tests.DetailsPane" > <UserControl.Resources> <DataTemplate DataType="{x:Type DetailsPane:Character}"> <StackPanel Orientation="Horizontal"> <TextBlock Text="{Binding Path=Name}"></TextBlock> </StackPanel> </DataTemplate> </UserControl.Resources> <Grid> <ListBox ItemsSource="{Binding Path=Characters}" /> </Grid> </UserControl> EDIT: I am being told that this may be a bug in Visual Studio 2008, as it worked correctly in 2010. You can download the code here: http://www.mediafire.com/?z1myytvwm4n - The Test/TwoCollec xaml file's designer will break with this code.

    Read the article

  • XSL to show highest number of copies in catalog.xml file

    - by SANJAY RAO
    In this the catalog.xml file. I have two books who have the same inventory (i.e. 20). I want to write an XSL file that will display the highest number of copies of a book in a catalog. If there are two or more books of the same inventory then they have to be displayed. <catalog> <Book> <sku>12345</sku> <title>Beauty Secrets</title> <condition>New</condition> <current_inventory>20</current_inventory> <price>99.99</price> </Book> <Book> <sku>54321</sku> <title>Picturescapes</title> <current_inventory>20</current_inventory> <condition>New</condition> <price>50.00</price> </Book> <Book> <sku>33333</sku> <title>Tourist Perspectives</title> <condition>New</condition> <current_inventory>0</current_inventory> <price>75.00</price> </Book> <Book> <sku>10001</sku> <title>Fire in the Sky</title> <condition>Used</condition> <current_inventory>0</current_inventory> <price>10.00</price> </Book> </catalog> Below is my catalog3.xsl file which is able to display only one out of the two books: <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" > <xsl:variable name="max"/> <xsl:template match="/"> <html> <body> <h2>Titles of Books for which Most Copies are Available</h2> <table border="2"> <tr bgcolor="#9acd32"> <th>Title</th> <th>No of Copies</th> </tr> <xsl:apply-templates/> </table> </body> </html> </xsl:template> <xsl:template match="catalog"> <xsl:for-each select="Book"> <xsl:sort select="current_inventory" data-type="number" order="descending"/> <tr> <xsl:if test="position()= 1"> <p><xsl:value-of select="$max = "/></p> <td><xsl:value-of select="title"/></td> <td><xsl:value-of select="current_inventory"/></td> </xsl:if> </tr> </xsl:for-each> </xsl:template> </xsl:stylesheet> Could anybody correct me to achieve my goal of displaying all the copies having the same maximum inventory in the catalog. Thanks.

    Read the article

  • Resizing/reprocessing videofiles to adjust total size being <= 4.7gb

    - by altern
    How could I resize or reprocess bunch of videofiles (tv show series) to be able write it on DVD? Total size of all files should be less or equal to the max size of dvd - 4.7G. Is there any kind of program which allows conversion with total filesize adjustement up to defined limit? Is there way to be sure quality will not suffer noticeably after video files adjustments? Maybe there is a software which allows adjusting quality and creating DVD video disk with nifty menu automatically? Any help is appreciated. Thanks!

    Read the article

  • Set the caret/cursor position to the end of the string value WPF textbox

    - by Zamboni
    I am try to set the caret/cursor position to the end of the string value in my WPF textbox when I open my window for the first time. I use the FocusManager to set the focus on my textbox when my window opens. Nothing seems to work. Any ideas? Note, I am using the MVVM pattern, and I included only a portion of the XAML from my code. <Window FocusManager.FocusedElement="{Binding ElementName=NumberOfDigits}" Height="400" Width="800"> <Grid> <Grid.ColumnDefinitions> <ColumnDefinition/> </Grid.ColumnDefinitions> <Grid.RowDefinitions> <RowDefinition/> <RowDefinition/> </Grid.RowDefinitions> <TextBox Grid.Column="0" Grid.Row="0" x:Name="NumberOfDigits" IsReadOnly="{Binding Path=IsRunning, Mode=TwoWay}" VerticalContentAlignment="Center" Text="{Binding Path=Digits, Mode=TwoWay, UpdateSourceTrigger=PropertyChanged}"/> <Button Grid.Column="0" Grid.Row="1" Margin="10,0,10,0" IsDefault="True" Content="Start" Command="{Binding StartCommand}"/> </Grid> </Window>

    Read the article

  • Database design for sharing photos site?

    - by javaLearner.java
    I am using php and mysql. If I want to do a sharing photos website, whats the best database design for upload and display photos. This is what I have in mind: domain: |_> photos |_> user Logged in user will upload photo in [http://www.domain.com/user/upload.php] The photos are stored in filesystems, and the path-to-photos stored in database. So, in my photos folder would be like: photos/userA/subfolders+photos, photos/userB/subfolders+photos, photos/userC/subfolders+photos etc Public/others people may view his photo in: [http://www.domain.com/photos/user/?photoid=123] where 123 is the photoid, from there, I will query from database to fetch the path and display the image. My questions: Whats the best database design for photo-sharing website (like flickr)? Will there be any problems if I keep creating new folder in "photos" folder. What if hundreds of thousands users registered? Whats the best practices What size of photos should I keep? Currently I only stored thumbnail (100x100) and (max) 1600x1200 px photos. What others things I should take note when developing photos-sharing website?

    Read the article

  • Virus sending phishing emails through exchange server

    - by therulebookman
    It appears that there is a virus on my network somewhere that is sending phishing emails through my exchange server. I can see the messages in message tracking and I see many SMTP errors for NDR's and rejected connections from external servers, but I do not see any SMTP authentications and I have logging up to MAX. How can I find the IP or hostname of the PC that is infected? Or is there some other explanation than virus? Anti-virus scan on server is clean. Server is not an open relay. Thanks

    Read the article

  • WPF Image change source when button is disabled

    - by Taylor
    Hi, I'm trying to show a different image when the button is disabled. Should be easy with triggers, right?! For some reason, I have not been able to get the images to switch. I've tried setting triggers on both the image and button. What is wrong with what I have below? How can I change the image source when the button is enabled/disabled? Thanks! <Button x:Name="rleft" Command="{Binding Path=Operation}" CommandParameter="{x:Static vm:Ops.OpA}"> <Button.Content> <StackPanel> <Image Width="24" Height="24" RenderOptions.BitmapScalingMode="NearestNeighbor" SnapsToDevicePixels="True" Source="/MyAssembly;component/images/enabled.png"> <Image.Style> <Style> <Style.Triggers> <DataTrigger Binding="{Binding ElementName=rleft, Path=Button.IsEnabled}" Value="False"> <Setter Property="Image.Source" Value="/MyAssembly;component/images/disabled.png" /> </DataTrigger> </Style.Triggers> </Style> </Image.Style> </Image> </StackPanel> </Button.Content> </Button>

    Read the article

  • My linux server takes more than an hour to boot. Suggestions?

    - by jamieb
    I am building a CentOS 5.4 system that boots off a compact flash card using a card reader that emulates an IDE drive. It literally takes about an hour to boot. The ultra-slow part occurs when Grub is loading the kernel. Once that's done, the rest of the boot process only takes about a minute to get to a login prompt. Does anyone have any suggestions? I suspect that it may have to do with UDMA. Everything IDE-related in my BIOS seems to checkout. The read performance hdparm is telling me 1.77 MB/s. Ouch! (But even at that rate, it still shouldn't take an hour to decompress and load the kernel) [root@server ~]# hdparm -tT /dev/hdc /dev/hdc: Timing cached reads: 2444 MB in 2.00 seconds = 1222.04 MB/sec Timing buffered disk reads: 6 MB in 3.39 seconds = 1.77 MB/sec Trying to enable DMA is a no-go though: [root@server ~]# hdparm -d1 /dev/hdc /dev/hdc: setting using_dma to 1 (on) HDIO_SET_DMA failed: Operation not permitted using_dma = 0 (off) Here's some command outputs that might help: System [root@server ~]# uname -a Linux server.localdomain 2.6.18-164.el5xen #1 SMP Thu Sep 3 04:47:32 EDT 2009 i686 i686 i386 GNU/Linux PCI info: [root@server ~]# lspci -v 00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub (rev 02) Subsystem: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub Flags: bus master, fast devsel, latency 0 Capabilities: [e0] Vendor Specific Information 00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02) (prog-if 00 [VGA controller]) Subsystem: Intel Corporation 82945G/GZ Integrated Graphics Controller Flags: bus master, fast devsel, latency 0, IRQ 10 Memory at fdf00000 (32-bit, non-prefetchable) [size=512K] I/O ports at ff00 [size=8] Memory at d0000000 (32-bit, prefetchable) [size=256M] Memory at fdf80000 (32-bit, non-prefetchable) [size=256K] Capabilities: [90] Message Signalled Interrupts: 64bit- Queue=0/0 Enable- Capabilities: [d0] Power Management version 2 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01) (prog-if 00 [UHCI]) Subsystem: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 Flags: bus master, medium devsel, latency 0, IRQ 16 I/O ports at fe00 [size=32] 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01) (prog-if 00 [UHCI]) Subsystem: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 Flags: bus master, medium devsel, latency 0, IRQ 17 I/O ports at fd00 [size=32] 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01) (prog-if 00 [UHCI]) Subsystem: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 Flags: bus master, medium devsel, latency 0, IRQ 18 I/O ports at fc00 [size=32] 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01) (prog-if 00 [UHCI]) Subsystem: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 Flags: bus master, medium devsel, latency 0, IRQ 19 I/O ports at fb00 [size=32] 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) (prog-if 20 [EHCI]) Subsystem: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller Flags: bus master, medium devsel, latency 0, IRQ 16 Memory at fdfff000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Capabilities: [58] Debug port 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) (prog-if 01 [Subtractive decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fde00000-fdefffff Prefetchable memory behind bridge: 00000000fdd00000-00000000fdd00000 Capabilities: [50] #0d [0000] 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01) Subsystem: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge Flags: bus master, medium devsel, latency 0 Capabilities: [e0] Vendor Specific Information 00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller (rev 01) (prog-if 80 [Master]) Subsystem: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 17 I/O ports at <unassigned> I/O ports at <unassigned> I/O ports at <unassigned> I/O ports at <unassigned> I/O ports at f800 [size=16] Capabilities: [70] Power Management version 2 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01) Subsystem: Intel Corporation 82801G (ICH7 Family) SMBus Controller Flags: medium devsel, IRQ 17 I/O ports at 0500 [size=32] 01:04.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) Subsystem: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ Flags: bus master, medium devsel, latency 32, IRQ 18 I/O ports at de00 [size=256] Memory at fdeff000 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 01:06.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) Subsystem: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ Flags: bus master, medium devsel, latency 32, IRQ 17 I/O ports at dc00 [size=256] Memory at fdefe000 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 01:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) Subsystem: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ Flags: bus master, medium devsel, latency 32, IRQ 19 I/O ports at da00 [size=256] Memory at fdefd000 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 hdparm ouput: [root@server ~]# hdparm /dev/hdc /dev/hdc: multcount = 0 (off) IO_support = 0 (default 16-bit) unmaskirq = 0 (off) using_dma = 0 (off) keepsettings = 0 (off) readonly = 0 (off) readahead = 256 (on) geometry = 8146/16/63, sectors = 8211168, start = 0 [root@server ~]# hdparm -I /dev/hdc /dev/hdc: ATA device, with non-removable media Model Number: InnoDisk Corp. - iCF4000 4GB Serial Number: 20091023AACA70000753 Firmware Revision: 081107 Standards: Supported: 5 Likely used: 6 Configuration: Logical max current cylinders 8146 8146 heads 16 16 sectors/track 63 63 -- CHS current addressable sectors: 8211168 LBA user addressable sectors: 8211168 device size with M = 1024*1024: 4009 MBytes device size with M = 1000*1000: 4204 MBytes (4 GB) Capabilities: LBA, IORDY(can be disabled) Standby timer values: spec'd by Vendor R/W multiple sector transfer: Max = 2 Current = 2 DMA: mdma0 mdma1 mdma2 udma0 udma1 *udma2 udma3 udma4 Cycle time: min=120ns recommended=120ns PIO: pio0 pio1 pio2 pio3 pio4 Cycle time: no flow control=120ns IORDY flow control=120ns Commands/features: Enabled Supported: * Power Management feature set * WRITE_BUFFER command * READ_BUFFER command * NOP cmd * CFA feature set * Mandatory FLUSH_CACHE HW reset results: CBLID- above Vih Device num = 0 CFA power mode 1: enabled and required by some commands Maximum current = 100ma Checksum: correct

    Read the article

  • using PixelBender to double the size of a bitmap

    - by jedierikb
    I have a performance question about pixel bender. I want to enlarge many BitmapData (double their size into new BitmapData). I was doing this with as3, but wanted to use pixel bender to get better performance. On my machines, I get great comparative performance out of many pixel bender demonstrations. To my surprise (or bad coding / understanding), I am getting much worse performance out of pixel bender -- 2 seconds to do 3000 scalings vs .5 seconds! I expected to get at least the same performance as as3. What am I doing wrong? I got the straightforward pixel bender code here (and it is included below for easy reference). package { import aCore.aUtil.timingUtils; import flash.display.BitmapData; import flash.display.Shader; import flash.display.ShaderJob; import flash.display.Sprite; import flash.display.StageAlign; import flash.display.StageScaleMode; import flash.events.Event; import flash.geom.Matrix; public class flashFlash extends Sprite { [Embed ( source="pixelbender/bilinearresample.pbj", mimeType="application/octet-stream" ) ] private static var BilinearScaling:Class; public function flashFlash( ):void { stage.align = StageAlign.TOP_LEFT; stage.scaleMode = StageScaleMode.NO_SCALE; addEventListener( Event.ENTER_FRAME, efCb, false, 0, true ); } private function efCb( evt:Event ):void { removeEventListener( Event.ENTER_FRAME, efCb, false ); traceTime( "init" ); var srcBmd:BitmapData = new BitmapData( 80, 120, false, 0 ); var destBmd:BitmapData = new BitmapData( 160, 240, false, 0 ); var mx:Matrix = new Matrix( ); mx.scale( 2, 2 ); for (var i:uint = 0; i < 3000; i++) { destBmd.draw( srcBmd, mx ); } traceTime( "scaled with as3" ); // create and configure a Shader object var shader:Shader = new Shader( ); shader.byteCode = new BilinearScaling( ); shader.data.scale.value = [2]; shader.data.src.input = srcBmd; for (var j:uint = 0; j < 3000; j++) { var shaderJob:ShaderJob = new ShaderJob( ); shaderJob.shader = shader; shaderJob.target = destBmd; shaderJob.start( true ); } traceTime( "scaled with pixel bender bilinearresample.pbj" ); } private static var _lastTraceTime:Number = new Date().getTime(); public static function traceTime( note:String ):Number { var nowTime:Number = new Date().getTime(); var diff:Number = (nowTime-_lastTraceTime); trace( "[t" + diff + "] " + note ); _lastTraceTime = nowTime; return diff; } } } And the pixel bender code: <languageVersion : 1.0;> kernel BilinearResample < namespace : "com.brooksandrus.pixelbender"; vendor : "Brooks Andrus"; version : 1; description : "Resizes an image using bilinear resampling. Constrains aspect ratio - divide Math.max( input.width / output.width, input.height / output.height ) and pass in to the scale parameter"; > { parameter float scale < minValue: 0.0; maxValue: 1000.0; defaultValue: 1.0; >; input image4 src; output pixel4 dst; void evaluatePixel() { // scale should be Math.max( src.width / output.width, src.height / output.height ) dst = sampleLinear( src, outCoord() * scale ); // bilinear scaling } }

    Read the article

  • Temporary debug releases and final application releases

    - by baron
    I have a quick question regarding debug and release in VS 2008. I have an app i've been working on - its not yet complete but the bulk of the functionality is there. So basically i'm trying to give a copy of it now to the person helping with documentation - just so they can have a play and get the feel for what i've made. Now the question is how to provide it to them. I was told to just copy the .exe out of the debug/bin folder and put that onto USB. But when testing, if I run this .exe anywhere else (outside of this folder) it crashes. I've now worked out why this is: var path = ConfigurationManager.AppSettings["PathToUse"]; var files = Directory.GetFiles(path); throws a null reference, so that App.config file is not being used. If I copy that file in with the .exe it works again. So actually my question is regarding the best way to manage this situation. What is the best way to provide a working copy to people, and, is there a reference on preparing apps for release - so everything is packaged together and installed in a clean structured folder heirarchy?

    Read the article

  • How to add an image to an SSRS report with a dynamic url?

    - by jrummell
    I'm trying to add an image to a report. The image src url is an IHttpHandler that takes a few query string parameters. Here's an example: <img src="Image.ashx?item=1234567890&lot=asdf&width=50" alt=""/> I added an Image to a cell and then set Source to External and Value to the following expression: ="Image.ashx?item="+Fields!ItemID.Value+"&lot="+Fields!LotID.Value+"&width=50" But when I view the report, it renders the image html as: <IMG SRC="" /> What am I missing? Update Even if I set Value to "image.jpg" it still renders an empty src attribute. I'm not sure if it makes a difference, but I'm using this with a VS 2008 ReportViewer control in Remote processing mode. Update I was able to get the images to display in the Report Designer (VS 2005) with an absolute path (http://server/path/to/http/handler). But they didn't display on the Report Manager website. I even set up an Unattended Execution Account that has access to the external URLs.

    Read the article

  • FileNotFoundException, although the XML file should be deployed

    - by Bernhard V
    Hi, I've got problems starting my WAR application on a local JBoss. After two other EARs are deployed and the TomcatDeployer begins deploying the WAR, I'm getting the following error message: 2010-04-28 10:01:56,605 ERROR [org.jboss.ejb.plugins.LogInterceptor] [] [main] EJBException in method: public abstract at.sozvers.stp.zpv.ejb.lea.rwsuc.EJBLeaRegelwerkSuchenRemote at.sozvers.stp.zpv.ejb.lea.rwsuc.EJBLeaRegelwerkSuchenHome.create() throws javax.ejb.CreateException,java.rmi.RemoteException, causedBy: javax.ejb.EJBException: org.springframework.beans.factory.access.BootstrapException: Unable to initialize group definition. Group resource name [classpath*:applicationContext.xml], factory key [contextService]; nested exception is org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'contextService' defined in URL [jar:file:/C:/ta30/nutzb/jboss-4.2.3.GA.ZPV/server/default/deploy/deploy.last/zpv-app-web-frontend-1.0-SNAPSHOT.war/WEB-INF/lib/zpv-comp-ejb-modules-1.0-SNAPSHOT-client.jar!/applicationContext.xml]: Instantiation of bean failed; nested exception is org.springframework.beans.BeanInstantiationException: Could not instantiate bean class [org.springframework.context.support.ClassPathXmlApplicationContext]: Constructor threw exception; nested exception is org.springframework.beans.factory.BeanDefinitionStoreException: IOException parsing XML document from class path resource [at/sozvers/stp/zpv/dao/ContextBasic.xml]; nested exception is java.io.FileNotFoundException: class path resource [at/sozvers/stp/zpv/dao/ContextBasic.xml] cannot be opened because it does not exist The sad thing is that the resource at/sozvers/stp/zpv/dao/ContextBasic.xml actually is placed in a JAR in one of my EAR files which should be deployed before the WAR. And at least I get a message that the deployment of the EAR has been successful. I also looked into the JAR with my file archiver and the ContextBasic.xml is indeed there at the right place. Is there a way for me to get sure that the JAR, not the EAR as a whole, is really deployed to the JBoss? I'm already starting to lose my head about this issue. Thank you. Bernhard

    Read the article

  • Common Mercator Projection formulas for Google Maps not working correctly

    - by Tom Halladay
    I am building a Tile Overlay server for Google maps in C#, and have found a few different code examples for calculating Y from Latitude. After getting them to work in general, I started to notice certain cases where the overlays were not lining up properly. To test this, I made a test harness to compare Google Map's Mercator LatToY conversion against the formulas I found online. As you can see below, they do not match in certain cases. Case #1 Zoomed Out: The problem is most evident when zoomed out. Up close, the problem is barely visible. Case #2 Point Proximity to Top & Bottom of viewing bounds: The problem is worse in the middle of the viewing bounds, and gets better towards the edges. This behavior can negate the behavior of Case #1 The Test: I created a google maps page to display red lines using the Google Map API's built in Mercator conversion, and overlay this with an image using the reference code for doing Mercator conversion. These conversions are represented as black lines. Compare the difference. The Results: Check out the top-most and bottom-most lines: The problem gets visually larger but numerically smaller as you zoom in: And it all but disappears at closer zoom levels, regardless of screen orientation. The Code: Google Maps Client Side Code: var lat = 0; for (lat = -80; lat <= 80; lat += 5) { map.addOverlay(new GPolyline([new GLatLng(lat, -180), new GLatLng(lat, 0)], "#FF0033", 2)); map.addOverlay(new GPolyline([new GLatLng(lat, 0), new GLatLng(lat, 180)], "#FF0033", 2)); } Server Side Code: Tile Cutter : http://mapki.com/wiki/Tile_Cutter OpenStreetMap Wiki : http://wiki.openstreetmap.org/wiki/Mercator protected override void ImageOverlay_ComposeImage(ref Bitmap ZipCodeBitMap) { Graphics LinesGraphic = Graphics.FromImage(ZipCodeBitMap); Int32 MapWidth = Convert.ToInt32(Math.Pow(2, zoom) * 255); Point Offset = Cartographer.Mercator2.toZoomedPixelCoords(North, West, zoom); TrimPoint(ref Offset, MapWidth); for (Double lat = -80; lat <= 80; lat += 5) { Point StartPoint = Cartographer.Mercator2.toZoomedPixelCoords(lat, -179, zoom); Point EndPoint = Cartographer.Mercator2.toZoomedPixelCoords(lat, -1, zoom); TrimPoint(ref StartPoint, MapWidth); TrimPoint(ref EndPoint, MapWidth); StartPoint.X = StartPoint.X - Offset.X; EndPoint.X = EndPoint.X - Offset.X; StartPoint.Y = StartPoint.Y - Offset.Y; EndPoint.Y = EndPoint.Y - Offset.Y; LinesGraphic.DrawLine(new Pen(Color.Black, 2), StartPoint.X, StartPoint.Y, EndPoint.X, EndPoint.Y); LinesGraphic.DrawString( lat.ToString(), new Font("Verdana", 10), new SolidBrush(Color.Black), new Point( Convert.ToInt32((width / 3.0) * 2.0), StartPoint.Y)); } } protected void TrimPoint(ref Point point, Int32 MapWidth) { point.X = Math.Max(point.X, 0); point.X = Math.Min(point.X, MapWidth - 1); point.Y = Math.Max(point.Y, 0); point.Y = Math.Min(point.Y, MapWidth - 1); } So, Anyone ever experienced this? Dare I ask, resolved this? Or simply have a better C# implementation of Mercator Project coordinate conversion? Thanks!

    Read the article

  • Can't get SFTP to work in PHP

    - by Chris Kloberdanz
    I am writing a simple SFTP client in PHP because we have the need to programatically retrieve files via n remote servers. I am using the PECL SSH2 extension. I have run up against a road block, though. The documentation on php.net suggests that you can do this: $stream = fopen("ssh2.sftp://$sftp/path/to/file", 'r'); However, I have an ls method that attempts to something similar public function ls($dir) { $rd = "ssh2.sftp://{$this->sftp}/$dir"; $handle = opendir($rd); if (!is_resource($handle)) { throw new SFTPException("Could not open directory."); } while (false !== ($file = readdir($handle))) { if (substr($file, 0, 1) != '.'){ print $file . "\n"; } } closedir($handle); } I get the following error: PHP Warning: opendir(): Unable to open ssh2.sftp://Resource id #5/outgoing on remote host This makes perfect sense because that's what happens when you cast a resource to string. Is the documentation wrong? I tried replacing the resource with host, username, and host and that didn't work either. I know the path is correct because I can run SFTP from the command line and it works fine. Has anyone else tried to use the SSH2 extenstion with SFTP? Am I missing something obvious here? UPDATE: I setup sftp on another machine in-house and it works just fine. So, there must be something about the server I am trying to connect to that isn't working.

    Read the article

  • Save all xml nodes to db without looping through it

    - by AndreMiranda
    I have this xml: <Path> <Record> <ID>6534808</ID> <Distance>1.05553036073736</Distance> </Record> <Record> <ID>6542471</ID> <Distance>1.05553036073736</Distance> </Record> ... and about more 500 nodes </Path> And I'm using the code below to get all "Record" nodes: XmlNodeList paths = xDoc.SelectNodes("//Record"); And, after that, I save each record to database. But, the problem is that I'm using a foreach to loop through this nodes and the count of this nodes may be more than 500, sometimes it gets up to 1000 "Records" node. And this gets too long... Is there a way to save all of these nodes without looping through it? Thanks!!

    Read the article

  • Using perl to split a line that may contain whitespace

    - by Tommy Fisk
    Okay, so I'm using perl to read in a file that contains some general configuration data. This data is organized into headers based on what they mean. An example follows: [vars] # This is how we define a variable! $var = 10; $str = "Hello thar!"; # This section contains flags which can be used to modify module behavior # All modules read this file and if they understand any of the flags, use them [flags] Verbose = true; # Notice the errant whitespace! [path] WinPath = default; # Keyword which loads the standard PATH as defined by the operating system. Append with additonal values. LinuxPath = default; Goal: Using the first line as an example "$var = 10;", I'd like to use the split function in perl to create an array that contains the characters "$var" and "10" as elements. Using another line as an example: Verbose = true; # Should become [Verbose, true] aka no whitespace is present This is needed because I will be outputting these values to a new file (which a different piece of C++ code will read) to instantiate dictionary objects. Just to give you a little taste of what it might look like (just making it up as I go along): define new dictionary name: [flags] # Start defining keys => values new key name: Verbose new value val: 10 # End dictionary Oh, and here is the code I currently have along with what it is doing (incorrectly): sub makeref($) { my @line = (split (/=/)); # Produces ["Verbose", " true"]; }

    Read the article

  • Making HTTP POST request

    - by infrared
    I'm trying to make a POST request to retrieve information about a book. Here is the code that returns HTTP code: 302, Moved import httplib, urllib params = urllib.urlencode({ 'isbn' : '9780131185838', 'catalogId' : '10001', 'schoolStoreId' : '15828', 'search' : 'Search' }) headers = {"Content-type": "application/x-www-form-urlencoded", "Accept": "text/plain"} conn = httplib.HTTPConnection("bkstr.com:80") conn.request("POST", "/webapp/wcs/stores/servlet/BuybackSearch", params, headers) response = conn.getresponse() print response.status, response.reason data = response.read() conn.close() When I try from a browser, from this page: http://www.bkstr.com/webapp/wcs/stores/servlet/BuybackMaterialsView?langId=-1&catalogId=10001&storeId=10051&schoolStoreId=15828 , it works. What am I missing in my code? Thanks EDIT: Here's what I get when I call print response.msg 302 Moved Date: Tue, 07 Sep 2010 16:54:29 GMT Vary: Host,Accept-Encoding,User-Agent Location: http://www.bkstr.com/webapp/wcs/stores/servlet/BuybackSearch X-UA-Compatible: IE=EmulateIE7 Content-Length: 0 Content-Type: text/plain; charset=utf-8 Seems that the location points to the same url I'm trying to access in the first place? EDIT2: I've tried using urllib2 as suggested here. Here is the code: import urllib, urllib2 url = 'http://www.bkstr.com/webapp/wcs/stores/servlet/BuybackSearch' values = {'isbn' : '9780131185838', 'catalogId' : '10001', 'schoolStoreId' : '15828', 'search' : 'Search' } data = urllib.urlencode(values) req = urllib2.Request(url, data) response = urllib2.urlopen(req) print response.geturl() print response.info() the_page = response.read() print the_page And here is the output: http://www.bkstr.com/webapp/wcs/stores/servlet/BuybackSearch Date: Tue, 07 Sep 2010 16:58:35 GMT Pragma: No-cache Cache-Control: no-cache Expires: Thu, 01 Jan 1970 00:00:00 GMT Set-Cookie: JSESSIONID=0001REjqgX2axkzlR6SvIJlgJkt:1311s25dm; Path=/ Vary: Accept-Encoding,User-Agent X-UA-Compatible: IE=EmulateIE7 Content-Length: 0 Connection: close Content-Type: text/html; charset=utf-8 Content-Language: en-US Set-Cookie: TSde3575=225ec58bcb0fdddfad7332c2816f1f152224db2f71e1b0474c866f3b; Path=/

    Read the article

  • Multicore solr on Ubuntu 10.04 working for anyone?

    - by coleifer
    Following instructions from the two sites below, I've installed tomcat6 and solr 1.4 http://gist.github.com/204638 https://wiki.fourkitchens.com/display/TECH/Solr+1.4+on+Ubuntu+9.10+and+CentOS+5 I have successfully got it up and running on a server running 9.04 with multicore support, but on the 10.04 I can't seem to get it to work. I am able to reach localhost:xxxx/solr/ on the 10.04 box and see a single link to the Solr Admin, but following the link takes me to a 404 page with the following output: /solr/admin/ HTTP Status 404 - missing core name in path The requested resource (missing core name in path) is not available I am also unable to access /solr/site1/ as I would except - it similarly returns a 404 <!-- from /var/solr/solr.xml, site dirs exist --> <cores adminPath="/admin/cores"> <core name="site1" instanceDir="site1" /> <core name="site2" instanceDir="site2" /> </cores> <!-- from /etc/tomcat6/Catalina/localhost/solr.xml --> <Context docBase="/var/solr/solr.war" debug="0" privileged="true" allowLinking="true" crossContext="true"> <Environment name="solr/home" type="java.lang.String" value="/var/solr" override="true" /> </Context>

    Read the article

< Previous Page | 338 339 340 341 342 343 344 345 346 347 348 349  | Next Page >