Search Results

Search found 10998 results on 440 pages for 'mobile phone'.

Page 342/440 | < Previous Page | 338 339 340 341 342 343 344 345 346 347 348 349  | Next Page >

• Provisioning SIP Phones over the internet

  - by Jorge Fernandez

  I have a few SIP Phones that are located of site and connect to my PBX over the internet to make calls. For some reason one of these phones has become unprovisioned. In my office phones get provisioned by the server via TFTP. The ones that I have off site I pre-provisioned manually before I sent them off-site (I'm in Florida the phone is in New Jersey). Whats the best way to provision these over the internet? TFTP is very insecure. Sending the plain text profiles with the SIP Account and Password over the internet is out of the question. The phones have been off-site for about 6 months without any issues. Im using Trixbox and Cisco 7940 Phones.

  Read the article

• Setting a wireless access point on Ubuntu server 11.10

  - by Solignis

  I am trying to setup a wifi access point with my Ubuntu server. I have managed to get my phone to connect the wireless and now it get a DHCP lease. Though it still cannot ping out or get pinged by anything on my network. I am prety sure my problem is iptables, but I not sure what would be wrong. Here is what my rules look like. (The ones pertaining to the bridge interface) # Allow traffic to / from wireless bridge interface iptables -A INPUT -i br0 -j ACCEPT iptables -A OUTPUT -o br0 -j ACCEPT I am guessing my rules are a little lean, the bridge exists on the same subnet as everything else on my network, I am using a 10.0.0.0/24 subnet. EDIT Oh yeah I should mention also, when I do a ping test, I get Destination Host Unreachable as the error.

  Read the article

• Making my computer an iPhone music dock?

  - by deddebme

  Are there any application which lets me play the music in my iPhone through the USB cable? It will be very convenient if I can just dock the phone (while the music is playing), and the music will come out from the computer's speakers instead of the speaker in the iPhone. Edit 1: Stock iPhone dock does have a line-out jack, thanks SidneySM for reminding me. Now the problem is, even though I have select Line In as the Sound Input in Mac OSX, there is no sound coming out from the speaker. How do I make the Speaker output the Line In audio?

  Read the article

• Outlook Anywhere remote https connection issue

  - by holian

  We have SBS 2003, and we use DYNDNS. We forward dyndns address 443 to local server ip 443 port. mycompany.dyndns.org:443 -- server.mycompany.local:443 In android phone i can check my mails with Outlook Active Snyc. From remote machine i can check my mails in owa (https://mycompany.dyndns.org/exchange) But i can't set up outlook 2013 to remote connect. I installed server.mycompany.local to remote machine trusted cert container, but i got error message: "There is a problem with the proxy server's security certificate. The name on the security certificate is invalid or does not match the name of the target site. Outlook is unable to connect to the proxy server. (Error Code 10)" Is it possible to connect exchange, via dnydns? Whats the problem? Thank you

  Read the article

• Is it possible to change error messages for users connecting to network printers?

  - by eric.s

  We are cleaning up our print server (Win XP). To test that printers are no longer really there we have set up some tests. These tests have left us with 176 questionable printers. We have now set Print access to Everyone to Deny. Testing shows this gives the user a 5 Access is denied. message. We would like to change this message for the user, so when they call our workstudy's who answer the phone do not interpret this as a computer rights management issue and can route the call properly. Is it possible? Is this error number system wide, or just for printing errors? If it's not a system wide error where might the string for this error be?

  Read the article

• Lync Server 2010 with Hosted VoIP PBX

  - by kmehta

  We just deployed Lync Server 2010 in our organization and it is working great so far. The next step for us is to enable enterprise voice so that we can replace our telephones with service that is handled 100% by Lync. This is where I am at a loss. I have a fully deployed Standard Edition Lync server and a hosted VoIP PBX provider with VoIP handsets. I would like to get rid of the handsets and have my company's phone service be handled by Lync client (e.g. someone calls my work number, and Lync rings instead of my old handset that is set up with the PBX) I am new to deploying these types of features. Any help is appreciated. Thanks.

  Read the article

• Can't access LAN computers with SSH

  - by endolith

  I got a new Windows 7 machine, and was using VNC,SSH etc to connect to my Ubuntu machine, and it worked fine previously. Now it doesn't work if I use the machine's hostname or local IP, but if I use the DynDNS name, it works. I can also access it from my Android phone using the local hostname over SSH. If I try to connect with SSH to the hostname, it says "Host does not exist". VNC says "Failed to get server address". NX says "no address associated with name", and I don't see it in Windows' "Network" folder. I've rebooted everything. I've turned off Windows firewall. It was working fine a few days ago, but now it's not. How do I figure out what's blocking it?

  Read the article

• How to install multiple versions of the same software?

  - by Matt Love

  I manage phone systems for multiple clients. Each system uses the same administrator software, but it runs on different versions depending on what version of firmware is installed on the system controller. The software is downloaded directly from the system controller so it's the right version. For example, if the controller runs on version 5.0.2, you have to run version 5.0.2 of the administrator software. You can't administrate a 5.0.2 controller with a later versions of administrator software. Bottom line, you have to have the right version of software to log into the controller. The software is not executable on its own, you have to install it. So every time I want to log into a different controller, I have to reinstall the right software. Any way to get around this? I'm running Windows 7 Enterprise x86.

  Read the article

• My 4 GB microSD card only allows me to use 1 GB

  - by James Litewski

  My phone came with a 4 GB microSD card. On the card it lists that 3 GB goes to Muve Music which is Cricket's music program, and I get 1 GB... Well, I don't pay for Muve Music, so why waste the space? I thought I'd be able to simply buy an adapter and reformat the microSD card to get the full 4 GB; but that wasn't the case... I could only find the 1 GB partition on the card. I even tried reformatting the disk, but I had no luck. How can I get the full 4 GB? BTW, I'm running Mac OS X v10.7 (Lion).

  Read the article

• Uploading with browser makes all other browser tabs and devices disconnect

  - by fabsenet

  Whenever I upload a video to YouTube all other browser tabs behave like there is no connection at all. It even affects my phone and other computers on the network therefor I think it has to do with my router. When the upload is done everything works normally again. I never observed this behavior with any other upload. My router is a Fritz!Box 7390 and my uploading PC is connected through a 1000mb/s switch (wired) to the router. Uploading through another browser does not change anything. I understand that other sites become slow as the network resources are limited, but stopping altogether feels wrong. speed.io measures for my internet connection: 40.894 Kbit/s down, 2.685 Kbit/s up, 29 ms ping, 2.048 con/m connects

  Read the article

• IPv6 in a Small Business

  - by Martyn

  I’ve been tasked to identify a new server and IT equipment for the company I work for (employees <20). I’m looking at getting a SBS 2011 Standard box. My Question is: Apart from ensuring that our router is IPv6 compliant, is there anything else I need to do/investigate to ensure that we won’t have IPv6 related problems in the future? When investigating this I can only find references to DNS Mangers etc. The SBS 2011 box will be used for exchange and remote log in access – it won’t be hosting any websites. Also will VOIP phone systems be affected by IPv6? (We are running a rather old VOIP system, would that need to be updated?

  Read the article

• Parent control software for iPhone

  - by Fraser Orr

  My kids both have iPod Touches and I'd like to apply some parental controls. I have had a look and I know there are some really limited features on the phone itself, and a variety of filtered browsers. However, none of them are really hitting what I want. The features I am looking for are: Filtered web (as above) Filtered access to Youtube and music Control over how often they are allowed to play games (like 1 hour per day) Whitelist control over who they can skype (or maybe facetime, but I am an android user so can't hook that net.) Any suggestions?

  Read the article

• Why can my Mac not connect to my iPhone via ssh?

  - by martin08

  I couldn't always ssh to my iPhone from my Mac. They're both on the same wifi network but sometimes the connection is established, sometimes it failed. From my Mac: $ ssh [email protected] ssh: connect to host 192.168.0.102 port 22: Operation timed out $ ping 192.168.0.102 PING 192.168.0.102 (192.168.0.102): 56 data bytes ping: sendto: No route to host ping: sendto: Host is down ping: sendto: Host is down I enabled SSH on the phone and am sure it can load webpages. So what might be a reason why they cannot connect? Thanks

  Read the article

• Blackberry Won't Sync: Says Processing

  - by Noah

  I have a blackberry storm 2 and I have it set up to sync, just like I've done with all the other ones in the company. They pull the address book/contacts from outlook, and aren't synced to an exchange server. I have everything setup and then when I hit synchronize it flashes "processing" the phone shows it trying to sync and then it is done in less than a second. It did warn me that the computer was not supplying enough power to charge the device and it said that I should make sure the drivers are correct. Also, I was warned that the device might not function properly down in the bottom right hand corner. Any ideas? I've uninstalled and reinstalled the blackberry software off the disc.

  Read the article

• Replace Hard Drive in Samsung NP900X1A - Need Disassembly Help Please

  - by xedgex

  Need to clone and restore existing 64GB HDD onto a 256GB HDD, can't manage to gain access to the internals of this laptop. I checked with Samsung, they do not make manuals available nor will they help over the phone as to how to remove the bottom cover of this Samsung NP900X1A Laptop. They did offer to sell me a manual BUT they are out of stock for another 10-15 days. I saw the screws under the 4 rubber feet and 4 rubber grommets, all removed but the cover is still on. Does anyone know if there are more screws to take off here? Also, I assume this replacement HDD will work (facto

  Read the article

• How do I set my router up to authenticate with my service provider?

  - by João Lourenço

  Currently I have this setup: D-Link DSL2640U connected to the phone line: VPI/VCI 0/40, Service Category UBR Without PCR Service pppoe_0_40_3 Interface nas_0_40 Protocol Bridging (LLC/SNAP-Bridging) 802.11q not enabled Bridge Service Enabled Computers have individual PPPoE connections (in Network and Sharing Centre - Set up a new connection or network - Connect to the Internet - Broadband (PPPoE) - Username and Password) How would I move these settings on each individual PC to the router so that all I need to do is connect to the wireless? I have been unsuccessful setting up anything other than Windows PCs on the network (I have tried Macs, iOS and Nokia SmartPhones too). Thanks for the responses in advance!

  Read the article

• MS Access 2010 hide/show text with abutton

  - by grant

  Hi I have a problem where the user has a form in MSAccess. The form contains information about the client. The client fields are – client’s first name, client’s last name, their street address, suburb and city, their landline number and their cell phone number and their email address. However the user does not always want to see the email address and would like to have a button that will show or hide the email address. I have to write a set of instructions that will solve this problem. Can anyone help??

  Read the article

• Logfile software for making querys, extracting and other operations

  - by Juw

  I have written an app that connects to a server IIS 6 to retrieve information. When doing this i have collected data (phone model etc) and send it to the server with a regular GET HTTP call like this: http://www.myserver.com/getData.php?phonemodel=userphone&appversion=2&id=20 This is logged in the IIS logfiles. I thought of writing my own parser for log files. But why invent the wheel? I´m looking for a software that can read the IIS 6 logfiles. I would like it to be able to do: Extraction - Extract all lines that contains: www.myserver.com/getData Filtering - View all lines where http-code is not 200 Queries - View all lines where phonemodel=iphone Any tips on free software that can help me with this? Thanx in advance!

  Read the article

• Why does my excel document have 960,000 empty rows?

  - by C-dizzle

  I have an excel document, Office 2007, on a Windows 7 machine (if that part matters any, I'm not sure but just throwing it out there). It is a list of all employee phone numbers. If I need to generate a new page, I can click on page 2 and the table will automatically generate again. The problem is, someone messed it up since it's on a network drive and now shows I have over 960,000 rows of data, when I really don't! I did CTRL+END to see if any data was in the last cell, so I cleared it out, deleted that row and column, but still didn't fix it. It almost seems like it duplicates itself after the deletion. How can I fix this instead of recreating the entire document?

  Read the article

• DSL to web connectivity is often lost

  - by broiyan

  I am experiencing a frequent web connectivity problem via a DSL modem. The problem usually shows up as a reload later screen inside of Google Chrome, as illustrated. My DSL service was fine for the first 2 months, but in the most recent month this problem has been occurring. I have this problem several times a day. A few weeks ago, I used to power cycle (off then on) the DSL modem but this usually did not solve the problem. However, in recent days, the power cycle does seem to fix the problem. When the problem occurs, the modem lights do not look unusual. All the lights are green or flashing green. This problem happens regardless of whether I am using ethernet or WiFi for the last few meters between the DSL modem and the computer. What is the likely cause? How can I help the phone company solve this? Their staff are not very effective at troubleshooting this.

  Read the article

• Android tethering via bluetooth keeps disconnecting

  - by Ian

  I'm currently using a Google Nexus tablet tethered via Bluetooth to a Samsung S3 for internet. Two things are annoying me. First, if I take the phone away from the tablet (go out for lunch), the tablet disconnects and has to be manually reconnected. Is there a way to have that happen automatically? Second, Bluetooth tethering, i.e. the internet sharing part needs to be switched on each time the bluetooth is switched on (or perhaps just after power cycling) on the S3. Is there no way to have that default to on? Thanks

  Read the article

• Bluetooth Headset drivers on Windows 7

  - by Tom Ribbens

  I have a Dell Precision with integrated bluetooth from work. I wanted to connect either one of my two bluetooth headsets (Plantronics UC Voyager Pro v2 and Sennheiser MM450X) in order to make calls with it using our Cisco IP Communicator. In both cases, the bluetooth pairs ok. Then Windows tries to install drivers, and fails, leaving the device useless. The devices work perfectly with my phone and tablet (both android). What can I do to get it to work? I can't seem to find drivers on either the Plantronics or the Sennheiser site. I am using the Plantronics without the USB dongle they provide, because that is temporarily misplaced :).

  Read the article

• How do laptop battery voltages affect runtime?

  - by Bigbio2002

  I ordered a new battery for my faithful XPS M1710. I'm not sure of the voltage of the battery I have now, but the new one that the Dell rep got me (after 3-4 times confirming my phone number and laptop model number) is 14.8v. I was a bit concerned about potential incompatibilities (as most of the other compatible batteries listed were 11.1v), but I figure that there's no way that Dell would "recommend" batteries that wouldn't work or fry your system. Now, my question is, how does voltage affect battery life? If we assume the needed power draw to be constant, a higher voltage would indicate less amperage needed, therefore the battery would last longer before running out, yes? Or am I missing something? For reference: P=I*V P = power I = current V = voltage (duh)

  Read the article

• Terminal Server 2003 Performance Troubleshooting

  - by MikeM

  Let me get your thoughts on terminal server performance problems. The server hosts average 25 users which, after running some numbers, on average use 600MB memory with their main applications running (web browser, adobe reader, IP phone client). All users are on the same LAN as server. We constantly experience slow response and short session lockups. Combined CPU usage is on average 10%. What appears strange to me is that the system shows 29GB physical memory with 25GB of it free. The page file usage is about 50% averaging 9GB used. Some server specs OS: Server 2003 32bit Enterprise with /PAE flag RAM: 32GB CPU: 2xQuad Core @ 2.27Ghz HD: RAID5 1.2GB After doing basic troubleshooting using performance monitor it leads me to believe that the performance problems are caused by the 32bit OS limitation in addressing full 32GB of physical memory even though the /PAE flag is used. Can anyone suggest something, troubleshooting steps that can lead to a more conclusive answer? Thanks

  Read the article

• cant make outbound calls - asterisk

  - by deanvz

  I have a basic Atcom IP01 with the following config Registered Voip (SIP) Trunk Registered Voip Phone - ext Dial Plan Outbound Call rule I made use of this manual that the manufacturer supplies: http://www.atcom.cn/cn/download/pbx/ip01/ATCOM%20IP01-User%20Manual-V1.0-EN.pdf Whenever I try and make a call, it seems that the outbound call rule that i defined does not get regarded as the default rule even though the dial plan lists this as the only outbound call rule. When dialling I see in the log file the following [Jan 1 09:10:07] NOTICE[176]: chan_sip.c:14377 handle_request_invite: Call from '6001' to extension '00765243679' rejected because extension not found. The 00765243679 is a cellular number. Am I missing a configuration in order to make outbound calls? Land line, other Voip numbers and cellular calls have been tried

  Read the article

< Previous Page | 338 339 340 341 342 343 344 345 346 347 348 349  | Next Page >